List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
501 SEMCO FORGE PVT. LTD.,
18/28, Site-IV, Sahibabad Sahibabad Industrial Area Sahibabad Uttar Pradesh
PIN1 : 201010
Phone No. : 22152200
GSTIN : 09AAKCS7793R1ZZ 		DELS33085D

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING OF TA GUIDE () AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) FORGING OF TA CLAMP() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) FORGING OF TA SHOE() AS PER OFM SPECIFICATION C NOT ESTABLISHED
4) FORGING OF FILLING PLUG 1000 LBS() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Steel Forging for Block Gas DRG. No. SKM - 957 () As per DRG. C Not Estab
2) Lever Locking DRG. No SKM-303*5() As per DRG. C Not Estab
3) Buffer Body DRG. No SKM 304*1() As per DRG. C Not Estab
4) Bracket Back Sight M/C GUN 7.62 TK-71 DRG. No SKM 309*1() As per DRG. C Not Estab
5) Breech Block Side 7.62 Machine Gun TK-71 DRG. No SKM 281*2() As per DRG. C Not Estab
6) Receiver Guide Front Side DRG. No SKM 305*2() As per DRG. C Not Estab
7) Forging Drg. For Plate bottom M/c gun 7.62 DRG. No. SKM 283*2() As per DRG. C Not Estab
Category : DDP,DP
Grade : I,II
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Intake Camshaft () 20-07-06 A C Estab.
2) Exhaust Camshaft () 20-07-15 A C Estab.
Category : DP
Grade : II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Forging for Counter shaft GB 2691 2630 0405 3() As per specification / Drawings C Not established
2) Forging for Main Shaft 2691 2620 7911 3() As per specification / Drawings C Not established
3) Forging for Drive Shaft 322 2820 301 50 (R1)() As per specification / Drawings C Not established
4) Forging for Coupling Flange AGB 312 262 2045 3 (A)() As per specification / Drawings C Not established
5) Forging for Coupling Flange RXL 2730 3530 5001 3() As per specification / Drawings C Not established
6) Forging for Steering Lever LH & RH 312 338 1005 50() As per specification / Drawings C Not established
7) Forging for Steering Arm 2154 3385 6003 3() As per specification / Drawings C Not established
8) Forging for King Pin Lower 340 332 1306 3(R2)() As per specification / Drawings C Not established
9) Forging for Flange Axle Housing 2604 3510 5102 3 (R1)() As per specification / Drawings C Not established
10) Forging for follower 322 337 0417 50() As per specification / Drawings C Not established
11) Forging for 1st Speed Gear on Main Shaft 2691 2620 5412 3 (R2)() As per specification / Drawings C Not established
12) Forging for Gear Rear 322 2820 211 50 (R1)() As per specification / Drawings C Not established
Category : DDP,DP
Grade : I,II
Size : S
502 VAKO SEALS PVT LTD
3/4 KRDN TRUST ESTATE OFF AAREY ROAD GOREGAON EAST MUMBAI Maharashtra
PIN1 : 400063
Phone No. : 40371234
GSTIN : 27AACCV0100D1Z4 		AACCV0100D

Download 		1) Gun Carriage Factory

[Deemed Registration]
Name Specification Use Status
1) 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038 Description : 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038() Specification : PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038 P Estab
2) 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037 Description : 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037 P Estab
3) 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039 Description : 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039 P Estab
4) 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040 Description : 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040 P Estab
5) 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4 Description : 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4() Specification : PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4 P Estab
Category : p
Grade : 3
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) CORRUGATED OIL SEAL () 411- 73-2 A E Estab.
2) SUB ASSY OIL SEAL () SB 92-1106-190 E Estab.
3) ASSY SEAL () SB 411-96-5 E Estab.
4) ASSY GLAND () SB 20-12-15-2 E Estab.
5) SEAL () SB 896-100 E Estab.
6) SEALING RING () 20-01-51-1 E Estab.
7) SEALING RING () 20-63-21 E Estab.
8) SEALING RING () 20-63-22-1 E Estab.
9) SEALING RING () 3334-171 E Estab.
10) SEALING RING () SB 20-34-222-3 E Estab.
11) SEALING RING ASSEMBLY. () SB 315-668 E Estab.
12) CUP ASSY () SB 20-12-07-2 E Estab.
13) CUP () SB 20-12-07-02 E Estab.
14) CUP () SB 20-27-18 E Estab.
15) CUP () SB 20-63-04-01 E Estab.
16) RING () A1-1289 E Estab.
17) RING () 20-01-10-1 E Estab.
18) RING () 303-10-4 E Estab.
19) RING () 303-38-11 E Estab.
20) RING () 303-11-2 E Estab.
21) RING () 355-48-091 E Estab.
22) RING () 355-48-044 E Estab.
23) RING () 355-48-041-01 E Estab.
24) RING () 355-48-006-01 E Estab.
25) RING () 355-48-017-01 E Estab.
26) RING () 355-48-022-01 E Estab.
27) RING () 355-48-024-01 E Estab.
28) RING () 358-48-045-01 E Estab.
29) RING () 358-48-047-01 E Estab.
30) RING () 358-048-054 E Estab.
31) RING () 358-48-047-01 E Estab.
32) RING () 358-48-045-01 E Estab.
33) RING () 506-100 E Estab.
Category : DP
Grade : II
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) OIL SEALS (5MM TO 1500MM)() As Per GCF Requirements & Specifications C Established
2) "O" RINGS (OUTER DIA 1MM TO 2500MM)() As Per GCF Requirements & Specifications C Established
Category : DP
Grade : II
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) Seal and Spring TO 6206406583 Description : Seal and Spring TO 6206406583() Specification : CQA(HV)5.45.001 / VAKO C Estab
2) CUP ASSY TO 6201062002 Description : CUP ASSY TO 6201062002() Specification : 172.62.013CB-1CB C Estab
3) CUP TO 6201062005 Description : CUP TO 6201062005() Specification : 172.62.012CB-1ACB C Estab
4) CUP TO 6206407012 Description : CUP TO 6206407012() Specification : 172.46.018CB C Estab
5) CUP TO 6206407013 Description : CUP TO 6206407013() Specification : 172.46.018CBACB C Estab
Category : p
Grade : 2
Size : S
503 M/S SUREKA INTERNATIONAL
315 JHAJHARIYA MARKET General Ganj Kanpur Nagar Uttar Pradesh
PIN1 : 208001
Phone No. : 9305570057
GSTIN : 09AAFFS3605LIZZ 		AAFFS3605L

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]() Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample E Estab
2) FABRICATION OF PONCHO GLACIER[21]() Specification : FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I R Estab
Category :
Grade : Grade III
Size : S
504 AKAR SPRING WORKS
PLOT NO 4, STATE BANK COLONY, Hingna Road, NAGPUR 440016 HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 2235077
GSTIN : 27AVFPB3520N1ZO 		AVFPB3520N

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) COMPRESSION SPRING TO OFAJ DRG NO FS 3092[00]() Specification : COMPRESSION SPRING TO OFAJ DRG. NO. FS - 3092 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Spring to drg no D 5174741 Rev a for Dhanush or 5174741 for Bofors and other 19 types of spring[65]() Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.gem.gov.in C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297[99]() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 C Nonestab
Category :
Grade : Grade III
Size : S
505 Ram Engineering Works
Gat No.374, Koregaon Bhima, Tal.Shirur, Pune MAHARASHTRA
PIN1 : 412216
Phone No. : 9226879493
GSTIN : 27AHZPG0843M1ZQ 		PNES22061E

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Cylinder liner (fully finished) () 20-01-50-1 C Not Estab
2) Cylinder liner (fully finished)() 303-07-22 C Not Estab
3) Cylinder Liner Forging() 303-07-22 C Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Heat treated forged and machined blank for nozzle front() as per drg. no. SK-9429/A C Not Estab.
2) Forged proof machined blank for nozzle front() as per drg. no. SK-8925/C C Not. Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY ASSY. FOR 250KG PRE-FRAG.[99]() Specification : BOMB BODY ASSEMBLY TO DRG. NO. ARDE 08040001030000000PB DT.14/05/2015. C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BANGALORE TORPEDO SECT 38MM 2M EMPT (6430200100)[64]() Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CENTRAL SLEEVE ASSY TO ARDE DRG NO 8603 02 01 01 05 000 00DC R NO 3 DTD 30 03 2012[00]() Specification : CENTRAL SLEEVE ASSY. TO ARDE DRG.NO. 8603 02 01 01 05 000 00DC, R.NO.3 DTD 30/03/2012 [MANUFACTURING, QUALITY ASSURANC & IDENTIFICATION MARK AS PER SPECIFICATION NO.ARDE/SPECN/PINAKA/RKT-03, Latest Issue.] OR LATEST AMENDED DRG & SPECN AS C Estab
2) PLUG END CLOSING ASSY FOR STATIC FIRING AS PER ARDE DRG NO 8603 02 01 01 03 000 22PA[00]() Specification : PLUG END CLOSING ASSY (FOR STATIC FIRING) AS PER ARDE DRG.NO 8603 02 01 01 03 000 22PA [MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATION NO. ARDE/SPECN/PINAKA/RKT-13 ISSUE: 02, REV NO:0 DATED 04/09/2015] C Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) TOP WASHER TO OFAJ DRG NO FS 513F[00]() Specification : DRG. NO. FS-513F. C Estab
Category : ddp
Grade : Grade III
Size : S
506 HMT Machine Tools Ltd
HMT Colony P.O, Kalamassery Ernakulam KERALA
PIN1 : 683503
Phone No. : 0484 2532166
GSTIN : 32AAACH9412J1ZR 		CHNH00338C

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Cylinder liner (fully finished) () 303-07-26 C Estab.
Category : DP
Grade : I
Size : L
507 AURO ENGINEERING PVT. LTD.
14, PATHAK ESTATE, OLD AGRA ROAD, NASHIK OLD AGRA ROAD NASHIK Maharashtra
PIN1 : 422002
Phone No. : 9921007458
GSTIN : 27AACCA4597R1ZV 		AACCA4597R

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE Description : 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE() Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND SPECIFICATION NO.S-I/CM/IMMK II/ATP/01. C Nonestab
Category : p
Grade : 3
Size : S
508 GOPAL AGRO ENGINEERING WORKS
RADAUR ROAD, VILLAGE AND POST, AURANGABAD (Dt.), YAMUNA NAGAR HARYANA
PIN1 : 135001
Phone No. : 01732-282704
GSTIN : 06AHRPP9396GIZG 		RTKC02240A

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Chest Rifle for 7.62mm 1B () As per drawing E Established
2) Chest Rifle for 7.62mm 1B () As per drawing E Established
Category : P
Grade : III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CRATE 12A WOODEN ISV-483A (HEAT/TPT) (6574370000)() CRATE WOOD 12-A TO DRG.PT.NO. ISV-483-A DC NO. 36999-A DATED 02/02/2005 SPECN:- IA-948 (a,k) DC (I) 36868-A, AIDE MEMOIRE W/4 C NOT ESTABLISHED
2) CRATE 13A WOODEN ISV-948 (6574380000)() CRATE, WOOD 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4 C NOT ESTABLISHED
3) PLATE ANGLE 64MMX64MM FOR CRATES (9911358104)() PLATE ANGLE 64MM X 64MM TO DRG. PART NO. ISV 8 DC NO.35855-A DT. 23/11/1994 FOR WOODEN CRATE-12A AND CRATE-13A AND BOX-S2 MK1 C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) High Explosive Factory
Name Specification Use Status
1) SLAB DEMOLITION BOX() DRG.NO.IND/ME/58 C NOT ESTAB
2) PEK-1 BOX() DRG.NO.IND/ME/55 C NOT ESTAB
Category : P
Grade : II
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) AMMN. CONTAINER BOX M 41A (WOOD)[14]() Specification : AMMN. CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A, DT.30.07.2007 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BOX-UNIT LOAD FOR 155MM SHELL M107 Description : BOX-UNIT LOAD FOR 155MM SHELL M107() Specification : DRG.NO. 3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002. C Estab
2) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET Description : MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET() Specification : DRG.NO:155-1000(M) (UNIT LOAD) CONSISTING OF PALLET TO DRG. NO. 155-1210(M), FRAME ASSEMBLY TO DRG. NO.155-1230(M) DC NO.37126-A, DT.25.07.07. C Estab
Category : p
Grade : 3
Size : S
509 Travancore Precision Components Pvt Ltd
Lakshmi,12-13-1241,2nd Floor St.No.8, Tarnaka, Secunderabad Hyderabad Telangana
PIN1 : 500017
Phone No. : 27006564
GSTIN : 36AADCT1147K1ZA 		AADCT1147K

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII Description : 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII() Specification : RESIN BASED COMBUSTIBLE CARTG. CASE (CCC) SET (DRG. NO. 10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF (1) BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2) CAP (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) CCC of Items for 125mm prac ammn LF 9911358371 Description : CCC of Items for 125mm prac ammn LF 9911358371() Specification : Combustible Cartg. Case of 7 items for 125mm Practice ammn. R Nonestab
2) NC disc II for 125mm FSAPDS Practice LF 9911358706 Description : NC disc II for 125mm FSAPDS Practice LF 9911358706() Specification : NC disc II for primary and secondary 125mm FSAPDS Practice drg. no. IRW 225 R Nonestab
3) NG Barrier of 125mm FSAPDS practice LF 9911358705 Description : NG Barrier of 125mm FSAPDS practice LF 9911358705() Specification : NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1 2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704 Description : COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704() Specification : COMBUSTIBLE COMPONENTS FOR PRIMARY AND SECONDARY 125MM FSAPDS PRACTICE (HEMRL/CCC/PS/417 AUG.2017) CONSIST OF.1.COMBUSTIBLE BODY PRIMARY -PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/1 .2.COMBUSTIBLE INNER CAP PRIMARY-PRACTICE TO SPEC./DRG.N C Nonestab
Category : p
Grade : 3
Size : S
510 Unity Forge pvt.ltd
D-10, Maraimalai Nagar, CHENNAI TAMIL NADU
PIN1 : 603209
Phone No. : 044 27452261
GSTIN : 33AAACU0829N1Z9 		AAACU0829N

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) ARTICULATED CONNECTING ROD () 3304- 19-2 C Established
2) ARTICULATED CONNECTING ROD FORGING () 20-04-19-4 C Established
3) AXLE (FORGING). () 20-08-236-2 C Established
4) CRANK SHAFT SHANK (ACCESSORY END) () 3305- 07-1 E Established
5) CAP OF MASTER CONNECTING ROD () 304- 15 2 E Established
6) CLUSTER GEAR FORGING () 20-08 200 3 C Established
7) CAP () 20-04 15 4 E Established
8) COUNTER WEIGHT FORGING () 20-05 122 4 C Established
9) CLUSTER GEAR (FORGING) () 402-450 C Established
10) CLUSTER GEAR () 20-08 204 3 E Established
11) CRANK SHAFT GEAR (FORGING) () 3305- 17- 1 C Established
12) FORGING FOR INSERTION () 20-04 14 4 E Established
13) GEAR (FORGING) () 307- 07 2 C Established
14) GEAR (FORGING) () 308- 68 2 C Established
15) GEAR (FORGING) () 412-25-2 C Established
16) GEAR (FORGING) () 346-08/09 C Established
17) GEAR (FORGING) () 308- 65 C Established
18) GEAR (FORGING) () 308-53-2 C Established
19) GEAR () 20-05 126 4 E Established
20) GEAR () 20-39-67-4 E Established
21) GEAR () 20-12 54 2 / 53-1 E Established
22) GEAR () 402- 30 7 E Established
23) GEAR () 402- 34 7 E Established
24) INCLINED SHAFT (FORGING) () 308- 67 2 C Established
25) GEAR OF CRANKSHAFT FLYWHEEL END () 3305-115 1 E Established
26) GEAR CLUSTER () 402- 39 4 E Established
27) OIL PUMP DRIVE GEAR (FORGING) () 3312-100 C Established
28) OIL PUMP DRIVE GEAR FORGING. () 3312-101- 4 C Established
29) VALVE TIMING GEAR AXLE () 20-06 136 7 E Established
30) VERTICAL SHAFT GEAR (BOTTOM) () 308- 64 3 E Established
31) SLEEVE (FORGING) () 20-39 70 2 C Established
32) TORSION BAR (FORGING) () 402-50-8 C Established
Category : DP
Grade : II
Size : S
511 T.T.S & BROTHERS
Old No.29, New No.79, Jani John Khan Road, Royapettah, CHENNAI TAMIL NADU
PIN1 : 600014
Phone No. : 044 28482600
GSTIN : 33ADKPT3044L1ZA 		ADKPT3044L

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Stud M6x24() 350-03 E Estab.
2) Stud M8x36() 350-90A E Estab.
3) Bolt M8x85() 356-15 E Estab.
4) Spring Dis lower 3327() 81-7 E Estab.
5) Cotter Pin 2x12() 354-17 E Estab.
6) Connector () 3327 112 2 E Estab.
7) Nut M12x1.5() 329-21 E Estab.
8) Straight Union() 45-1 E Estab.
9) Cotter Pin() 354-19 E Estab.
10) Adjusting Bolt() 312-104 E Estab.
11) Cotter Pin 3.2x18() 3.254-18 E Estab.
12) Bush() 301-061 E Estab.
13) Stud M8x30() 550-111 E Estab.
14) Nut M10() 351-50 E Estab.
15) Bolt() 360-26-027 E Estab.
16) Nut M6() 351-06 E Estab.
17) Nut M8() 351-02 E Estab.
18) Screw M6x18() 356-18 E Estab.
19) Setting Ring() 3308-257 E Estab.
20) Cover Screw () 327-65A E Estab.
21) Nut() 305-45-1 E Estab.
22) Crank Pin Plug() 305-10 E Estab.
23) Cotter Pin 1.6x12() 354-09A E Estab.
24) Cotter Pin 2x20() 354-12 E Estab.
25) Bolt M8x20() 356-138 E Estab.
26) Nut M12x1.5() 351-09 E Estab.
27) Plug() 307-13-1 E Estab.
28) Nut M18x1.5() 3327-116 E Estab.
29) Nut() 306-71-1 E Estab.
30) Bright Washer() 353-04-2 E Estab.
31) Bolt M8-6G() 7796 E Estab.
32) Stud M10x48() 550-118 E Estab.
33) Washer() 353-93-1 E Estab.
34) Elbow() 306-130-1 E Estab.
35) Nut() 351-14 E Estab.
36) Screw M5x8() 302-44 E Estab.
37) Bright Washer() 353-05-1 E Estab.
38) Straight Union() 20-20-86 E Estab.
39) Slotted Nut M12() 351-26-1 E Estab.
40) Cotter Pin 2.5x20() 354-28 E Estab.
41) Bolt M6x45() 356-115-1 E Estab.
42) Bolt M6x74() 356-60 E Estab.
43) Tie rod Shaft() 334-24 E Estab.
44) Nut M9x31() 351-031 E Estab.
45) Cotter Pin() 351-14 E Estab.
46) Cotter Pin() 354-18 E Estab.
47) Nut() 20-06-58 E Estab.
48) Bolt M6x20() 356-84 E Estab.
49) Slated Nut M12() 351-26-1 E Estab.
50) Bright Washer() 353-42 E Estab.
Category : DP
Grade : II
Size : S
512 NIP Technologies Pvt.Ltd
7/401, 7th Block, West Mogappair, CHENNAI TAMIL NADU
PIN1 : 600037
Phone No. : 044 26531556
GSTIN : 33AACCN3623M1ZI 		AACCN3623M

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Ring() 355-08 E Estab.
2) Ring() 355-06 E Estab.
3) Ring() 355-06-1 E Estab.
4) Ring() 355-15 E Estab.
5) Ring() 355-16 E Estab.
6) Packing Ring() 355-09-1 E Estab.
7) Packing Ring() 20-55-25 E Estab.
8) Gasket() 3338-442 E Estab.
9) Gasket() 413-28 E Estab.
10) Gasket() 402-99-1 E Estab.
11) Gasket() 173-02 E Estab.
12) Gasket() 303-14-2 E Estab.
13) Gasket() 173-03 E Estab.
14) Gasket for Water pump() SK/EFA/319 E Estab.
15) Wiper Bush() 400640-307-06-4 E Estab.
16) Soft Plain Copper washer() As per Drawing and Specifications E Estab.
17) Copper washer() As per Drawing and Specifications E Estab.
18) Ring() 355-48-026-1 E Estab.
19) Heat resistant Copper washer() As per Drawing and Specifications E Estab.
Category : DP
Grade : II
Size : S
513 Perfect Gears (Chennai) Pvt.Ltd
2, Vembuli Amman Koil, 1st Cross Street, Udhayam Colony, K.K.Nagar(West), CHENNAI TAMIL NADU
PIN1 : 600078
Phone No. : 044 23640404
GSTIN : 33AAACP5831B1ZZ 		AAACP5831B

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Water pump drive Torsion bar() 402-37-7 E Estab.
2) TA in machining of Gear() 20-08-247 C Estab.
3) TA in machining of Gear() 20-08-205-4 C Estab.
4) Intake Camshaft Gear() 307-07-2 E Estab.
5) Incline Shaft Gear () 308-67-2 E Estab.
6) Generator Drive Gear() 20-08-260 E Estab.
7) Gear Shaft() 308-68-2 E Estab.
8) Gear() 402-34-9 E Estab.
9) Gear() 20-12-85 E Estab.
10) Gear() 20-12-54-2 E Estab.
11) Gear() 20-12-53-1 E Estab.
12) Gear() 20-08-203-3 E Estab.
13) Exhaust Camshaft Gear() 307-16-2 E Estab.
14) Drive Gear() 402-98 E Estab.
15) Camshaft Bush() 307-08-3 E Estab.
Category : DP
Grade : II
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) THRUST DISK TO 6101040060 Description : THRUST DISK TO 6101040060() Specification : 172.40.327/PL C Estab
2) GEAR WHEEL TO 6106408071 Description : GEAR WHEEL TO 6106408071() Specification : 172.47.142-1/PL C Estab
3) GEAR TO 6206004139 Description : GEAR TO 6206004139() Specification : 172.26.019 C Estab
Category : p
Grade : 2
Size : S
514 Revathi Engineering Pvt Ltd
S9, T.I.E, PHASE II Balanagar Hyderabad Telangana
PIN1 : 500037
Phone No. : 23771229
GSTIN : 36AAECR3682G1Z8 		HYDR06602B

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) MACHINING AND LEAK PROOF TEST OF HAND GRENADE EMPTY BODIES AS PER DRG NO ITW 63[32]() Specification : MACHINING AND LEAK PROOF TEST OF HAND GRENADE EMPTY BODIES AS PER DRG NO. ITW-63. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
2) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL C Nonestab
3) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
4) COMPENSTATOR PISTON TO DRG NO 44P 02007 ST REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Nonestab
5) PISTON HOT TO DRG NO 44P 02010 ST REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Nonestab
6) PISTON ROD TO DRG NO 44P 02012 ST 2 REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Nonestab
7) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
8) TRIGGER TO DRG NO 44P 06008 REQ FOR AMR[70]() Specification : AS PER REQ C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Link for 30 mm gun Fully Finished[70]() Specification : Link for 30 mm gun Fully Finished to Drg No 9H623 REQUIRED FOR 30mm BMP II Ammn LF No 7013889230 E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) EXTRACTOR TO DRG NO29P 0020STAR2 required for 0POINT315 Sporting Rifle[03]() Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle C Nonestab
2) PROTECTOR TO DRG NO 29P 0050STAR required for 0POINT315 Sporting Rifle[03]() Specification : AS PER DRG.NO. 29P 0050* required for 0.315" Sporting Rifle C Nonestab
3) BLADE FORE SIGHT 29P 0004STAR required for 0POINPOINT315 Sporting Rifle[70]() Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle C Nonestab
4) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025[70]() Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025 R Nonestab
5) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]() Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL C Nonestab
6) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]() Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102096[62]() Specification : SHAFT TO DRG NO. 166.29.305CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Machining of AL Alloy Rod to produce ADAPTER Nut as per drg no 4 025998 Det No 075 in FC for 125mm HEAT Without surface coating painting operation[91]() Specification : Machining of AL Alloy Rod (I/Code-0611601060) to produce ADAPTER Nut as per drg. no. 4-025998 Det. No. 075 in F/C for 125mm HEAT. Without surface coating/painting operation R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) LINK CARTG. METALLIC BELT 7.62MM M13() Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 & TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004 (II) JSS : 0465-01-1994 (REVISION NO. 1) NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. E Nonestab
Category :
Grade : Grade III
Size : S
515 Madnani Engineerings Works
10-B, Co-operative Industrial Estate, Udyog Nagar Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2240897
GSTIN : 09AABFM3824F1ZH 		AABFM3824F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) IMPROVED SPACE HEATING DEVICE BUKHARI FOR COLD CONDITIONS[21]() Specification : DIPAS/Specifications/Improved SHD (BUKHARI)/3/2017 E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER FOR BSO[62]() Specification : CONTAINER TO DRG NO.OFDR/CT/1/M1/A3AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN. NO. DGOF/OFDR/008. R Nonestab
Category :
Grade : Grade III
Size : M
516 ALERIS ALUMINUM DUFFEL BVBA
A STOCLETAAN 87 DUFFEL BELGIUM
PIN1 : 3215
Phone No. : 003215302237 		0403045292

Download 		1) Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY EXTRUDED BARS 130MM DIA[7075-T6510 (ASTM B-221M)]() 7075-T6510 (ASTM B-221M) R Estab.
2) ALUMINIUM ALLOY EXTRUDED BARS 135MM DIA [7075-T6510 (ASTM B 221M)]() 7075-T6510 (ASTM B 221M) R Estab.
3) ALUMINIUM ALLOY EXTRUDED BARS 75MM DIA [7075-T6511 (DTD 5124) ]() 7075-T6511 (DTD 5124) R Estab.
Category : DDP
Grade : I
Size : L
517 SWASTIK ACID & CHEMICALS NAGPUR
Chandrashekhar Azad Square, Central Avenue NAGPUR MAHARASHTRA
PIN1 : 440032
Phone No. : 0712-2764908
GSTIN : 27AAGFS0979Q1ZB 		NGPS02180D

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) LITHARGE() Specn-JSS-6810-111:2007 REV-1 R ESTB.
2) Di Basic Lead Stearate() Specn-JSS-6810-145:2006 DC 4005 ME Dtd-8.1.2010 R ESTB.
Category : S
Grade : II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Litharge[10]() Specification : As per TMI-516( Bofors Specn.) R Estab
2) Di Basic Lead Stearate[10]() Specification : Specn-JSS-6810-145:2006 DC 4005 ME Dtd-8.1.2010 R Estab
3) Paraffin oil for Biazzi process (Paraffin liquid grade - I)[10]() Specification : JSS 9160 - 05 - 2001 (Revision No. 1) R Estab
4) Aluminium Stearate[10]() Specification : ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.. R Estab
5) Zinc Stearate[10]() Specification : ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2). R Estab
6) ETHYLENE GLYCOL[10]() Specification : ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002. R Estab
7) Tri Chloro Ethylene[10]() Specification : ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS/245/1988 (THIRD REVISION) REAFFIRMED 2001. R Estab
Category : S
Grade : II
Size :
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1003134011 DESMODURE RC A SOLUTION OF POLYISOCYANURATE OF TOLUNEDIISOCYNATE IN APPROX 35 PERCENT ETHYL ACETATE[10]() Specification : DESMODURE RC A SOLUTION OF POLYISOCYANURATE OF TOLUNEDIISOCYNATE IN APPROX 35 PERCENT ETHYL ACETATE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CALCIUM CARBONATE CHALK CALCIT Description : CALCIUM CARBONATE CHALK CALCIT() Specification : CALCIUM CARBONATE CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD. R Estab
2) Camphor Description : Camphor() Specification : IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002 R Estab
3) CAUSTIC SODA TECHNICAL FLAKES Description : CAUSTIC SODA TECHNICAL FLAKES() Specification : CAUSTIC SODA TECHNICAL FLAKES TO SPECIFICATION IS:252-1991. (THIRD REVISION), Reaffirmed 2003 Amds 1. R Estab
4) Formaldehyde SOLUTION Description : Formaldehyde SOLUTION() Specification : FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973.(FIRST REV) REAFFIRMED 2005,AMDS 2. R Estab
5) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
6) Soda Ash ( Light ) Technical Description : Soda Ash ( Light ) Technical() Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 FOURTH REVISION.DC-3804-ME DTD.3.2.2004.(REAFFIRMED 2005) R Estab
7) Glycerine for Nitration Description : Glycerine for Nitration() Specification : GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST. R Nonestab
Category : s
Grade : 2
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(PROV)- DC NO.3754-ME DATED 12.12.2002 R Estab
Category : s
Grade : 2
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION item code 1001015748[10]() Specification : BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE R Nonestab
Category :
Grade : Grade III
Size : S
518 Die Hard Polymer Products
Mainak, 13/2, K.B.Sarani, Kolkata West Bengal
PIN1 : 700080
Phone No. : 033 25593177
GSTIN : 19ACCPC0670N1ZL 		ACCPC0670N

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Sealing Ring () 3334-171 E Estab.
2) Ring TRL() 303-11-2 E Not Estab
3) Gasket() 3327-61-3 E Not Estab
4) Ring TRL() 303-11-2 E Established
Category : P
Grade : II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Rubber Items for MPV[90]() Specification : RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) R S Buffer[90]() Specification : As per specification / drg. C Estab
2) Rubber Bush[90]() Specification : As per specification / drg. C Estab
3) Rubber Packing for Bracket[90]() Specification : As per specification / drg. C Estab
4) Rubber Packing for Strap[90]() Specification : As per specification / drg. C Estab
5) Rubber Pad[90]() Specification : As per specification / drg. C Estab
Category : p
Grade : Grade III
Size : S
519 AAN ENGINEERING INDUSTRIES LIMITED
38 K.M STONE DELHI JAIPUR HIGHWAY KHANDSA VILLAGE GURUGRAM Haryana
PIN1 : 122001
Phone No. : 2824801
GSTIN : 06AAECR6020J1ZI 		RTKR05880A

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CASTING & MACHINING OF ALUMINIUM, FERROUS & STEEL (MANGANGSE) FOR T-72 COMPONENTS() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) MACHINING OF SIZE UPTO 500MM X 500MM (ALUMINIUM, FEEEOUS, STEEL ALLOYS)() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) ALLOY STEEL CASTING OF WEIGHT UPTO 50KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY EMPTY FOR 51 MM SMOKE [62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPEN.NO.CQA(A) 2352 (d) C Nonestab
2) BODY FOR 51 MM ILLUMINATING[62]() Specification : DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Body Cast Iron Empty for FTW[64]() Specification : CIA 3807(d) Drg. No. DD(L) 13461/A/1 C Nonestab
2) BOMB BODY (EMPTY)FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]() Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
2) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) FUZE T&P DA NO. 213P MK-5( M4) EMPTY FOR MORTAR BOMB 120MM ILLG.[63]() Specification : L 9974-F(L) [DRG. NO. 2907A-10004] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) FUZE T&P DA NO. 213P MK-5( M3) EMPTY FOR MORTAR BOMB 81 MM ILLG.2A[62]() Specification : L 9974-F(L) [DRG. NO. ARDE1987 RT ,part no. IQX 67] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922[63]() Specification : CQA(A) 0922 C Nonestab
2) FUZE PERCN DA NO.117 MK 20 EMPTY/COMPLETE/WITH CAP DESGN REF L5/10744/GE/341 PART NO. QX 244 GE AND ITEM LIST FOR QX 244 GE DESGN REF NO.(I.A.6900) L5 / 10744 / GE / 341, SPECN NO. I.A. 1204[63]() Specification : I.A. 1204 C Nonestab
3) FUZE PERCN.D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DESIGN.REF.NO. CIA/AMN/273 PT.NO. IQX 35 GE SPECN. NO. CQA(A) 0917[6331800110]() Specification : CQA(A) 0917 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY (9911356459)[99]() Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB. E Nonestab
Category : ddp
Grade : Grade II
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...[99]() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... R Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...[99]() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... R Nonestab
2) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : ddp
Grade : Grade II
Size : S
520 KGK Industries
Shed No 80-A, SIDCO Industrial Estate, Coimbatore. TAMIL NADU
PIN1 : 641021
Phone No. : 0422 4242800
GSTIN : 33AACFK3998F1Z8 		CMBK03985C

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) GEAR CLUSTER () 402-39-4 C Estab.
2) DRIVE SHAFT (FORGING) () 3308-40-2 C Estab.
3) TORSION BAR (FORGING) () 402-37-7 C Estab.
4) CRANK SHAFT SHANK (ACCESSORY END) () 3305-07-1 C Estab.
5) GEAR (FORGING) () 307-16-2 C Estab.
6) COVER () 20-39-77-2 E Estab.
7) GEAR (FORGING) () 3312- 99 C Estab.
8) VALVE TIMING GEAR AXLE () 20-061-36-7 E Estab.
9) AXLE (FORGING). () 20-08-236-2 C Estab.
10) OIL PUMP GEAR () 3312-100-2 & 101-5 E Estab.
11) GEAR (FORGING) () 3312-98-2, 3312-99-2 C Estab.
12) OIL PUMP DRIVE GEAR FORGING() 3312-101-4 C Estab.
13) GEAR (FORGING) () 307-16-2 C Estab.
14) GEAR () 402-34-7 E Estab.
15) WATER PUMP DRIVE GEAR () 402-35-5 E Estab.
16) GEAR (FORGING) () 307-07-2 C Estab.
17) ACR CAP () 20-04-22-4 E Estab.
18) RING HOLDER() 20-05-59-3 E Estab.
Category : P
Grade : II
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) FUEL CHANGE OVER UNIT Description : FUEL CHANGE OVER UNIT() Specification : FUEL CHANGE OVER UNIT Drg./Pt. no. B5092108(V2) C Estab
Category : p
Grade : 3
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Oil Pump Drive Description : Oil Pump Drive() Specification : 20-08-245 C Estab
2) GEAR Description : GEAR() Specification : 20-05-126-4 C Estab
3) CLUSTER GEAR Description : CLUSTER GEAR() Specification : 20-08-200-3 C Estab
4) ACR Cap Description : ACR Cap() Specification : 20-04-22-4 C Estab
5) Exhaust Manifold Description : Exhaust Manifold() Specification : SB 418-00-6 C Estab
Category : ddp
Grade : 1
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) GEAR Description : GEAR() Specification : 20-12-26-1 C Estab
2) ACR Cap Description : ACR Cap() Specification : 20-04-22-4 C Estab
3) Exhaust Manifold Description : Exhaust Manifold() Specification : SB20-18-00-4 C Estab
4) COVER Description : COVER() Specification : 20-39-77-2 C Estab
5) AXLE Description : AXLE() Specification : 20-08-236-2 C Estab
Category : ddp
Grade : 1
Size : S