List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
521 ASHOKA RUBBER INDUSTRIES,
C-23B-1 PANKI SITE-1, INDUSTRIAL AREA PANKI SITE-1, INDUSTRIAL AREA KANPUR NAGAR Uttar Pradesh
PIN1 : 208022
Phone No. : 2504099
GSTIN : 09AERPC5411L1ZA 		AERPC5411L

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Rubber Stud 13A() As per Drg. & specification C Not Established
Category : DP
Grade : I,II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 TYPE B SIZE 914.4 MM WIDE X 8 MM THICK() IND/ME/645 R Not Estab.
2) RUBBER SLUGS FOR CARTG 12 BORE ANTIRIOT TO DRG NO AFK/SK-2675 SHEET NO.1() DRG NO AFK/SK-2675 SHEET NO.1 C Not Estab.
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Protective ring for copper band for 105mm HE,COL.,SMK.,ILLG.() as per Drg. No. SK-8337/A C Not Estab.
2) Protective ring for copper band() as per Drg. No. SK-7844/A C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) THREE WAY ROOF POLE MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) THREE WAY ROOF POLE MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
2) FOUR WAY MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
3) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) THREE WAY ROOF POLE MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Estab
2) FOUR WAY MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Estab
3) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Estab
4) STUD RUBBER TO DRG. PT. NO. 1656 ISV (OEF DRAWING NO. SK-938)[21]() Specification : OEF DRAWING NO. SK-938 R Estab
5) RUBBER STUD ROUND BLACK[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
6) D Ring 19 mm Nickel Plated x 10.5 mm x 2 mm dia (For Pouches Ammun.)[21]() Specification : As per Drg. No.- SK-860 R Estab
7) PIN TENT ANGLE IRON MED. MK-2[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Estab
8) TENT RING IG 12.5 MM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
9) RUBBER COMPOUND FOR SOLE & HEEL[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
10) RUBBER ADHESIVE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
11) FABRICATION OF RUBBER COMPOUND FOR SOLE & HEEL FOR BOOT ANKLE LEATHER DVS,NO MATERIAL WILL BE PROVIDED BY THE FACTORY. ALL REQUIRED MATERIALS FOR FABRICATION[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]() Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A. R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) THREAD PROTECTOR TO OFAJ.DRG.NO.SM-952[00]() Specification : THREAD PROTECTOR TO OFAJ.DRG.NO.SM 952 R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) PROTECTIVE RING FOR BASE END THREAD Description : PROTECTIVE RING FOR BASE END THREAD() Specification : PROTECTIVE RING FOR BASE END THREADING AS PER DRG. NO. SK-8071/A MATERIAL NITRILE/ NEOPRENE SYNTHETIC RUBBER GREEN COLOURED SULPHERLESS P Estab
2) PROTECTIVE RING BANDS SK 7723 1 A Description : PROTECTIVE RING BANDS SK 7723 1 A() Specification : PROTECTIVE RING BANDS SK 7723-1 -A P Estab
3) PROTECTIVE RING BANDS SK 7723 A Description : PROTECTIVE RING BANDS SK 7723 A() Specification : PROTECTIVE RING BANDS SK 7723 A P Estab
Category : p
Grade : 2
Size : S
522 PRODIGY ENGINEERING ENTERPRISES
SHED NO. 21 SIDCO INDUSTRIAL ESTATE, THUVAKUDI TIRUCHIRAPPALLI Tamil Nadu
PIN1 : 620015
Phone No. : 2501660
GSTIN : 33AAHFP5367Q1ZK 		CHEP09472B

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL C Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
3) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COMPENSTATOR PISTON TO DRG NO 44P 02007 ST REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Estab
2) PISTON ROD TO DRG NO 44P 02012 ST 2 REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Estab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Estab
4) BARREL LATCH TO DRG NO 44P 04005[70]() Specification : AS PER OFB REQUIREMENT C Estab
5) TRIGGER BOX SPINE TO DRG NO 44P 06101 REQ FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS C Estab
6) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]() Specification : AS PER OFB REQ C Estab
7) TRIGGER BOX BOLT TO DRG NO 44P 06003[70]() Specification : AS PER REQ C Estab
8) TRIGGER TO DRG NO 44P 06008 REQ FOR AMR[70]() Specification : AS PER REQ C Estab
9) REAR MOUNTING BLOCK TO DRG NO 44P 05102 REQ FOR AMR[70]() Specification : AS PER OFB REQ C Estab
10) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 REQ FOR AMR[70]() Specification : AS PER REQ C Estab
11) CARRYING HANDLE ASSY TO DRG NO 11000 REQ FOR AMR[70]() Specification : AS PER REQ C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
2) Cheek Piece Assembly[70]() Specification : Cheek Piece Assembly to drg no. 9000 st C Nonestab
3) CATCH MAGAZINE[70]() Specification : AS PER DRAWING C Nonestab
4) LEVER CHANGE[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CYLINDER TO DRG NO 44P 02001 STAR[70]() Specification : AS PER OFT REQUIREMENTS R Nonestab
2) THROTTLE TO DRG NO 44P 02008 ST REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Nonestab
3) PISTON ROD TO DRG NO 44P 02012 ST 2 REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL[70]() Specification : MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL DRAWING NO TEND 2662 C Nonestab
2) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]() Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL C Nonestab
3) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]() Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL C Nonestab
4) Cheek Piece Assembly[70]() Specification : Cheek Piece Assembly to drg no. 9000 st C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Block Gas to ICR 1322 with OFT material[70]() Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl C Nonestab
2) Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm[70]() Specification : Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm C Nonestab
3) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
4) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL E Nonestab
5) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL C Nonestab
6) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL C Nonestab
7) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL C Nonestab
8) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL C Nonestab
9) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL C Nonestab
10) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]() Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL E Nonestab
11) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle C Nonestab
12) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]() Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE C Nonestab
13) BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
14) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
15) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]() Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION C Nonestab
16) Bar locking Slider C1058[70]() Specification : Bar locking Slider C1058 C Nonestab
17) SUPPLY OF TRIGGER TO DS CAT NO 1005 001690 ICR 1238 DC NO 27044 SA DT 23 03 2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]() Specification : SUPPLY OF TRIGGER TO DS CAT NO 1005-001690 (ICR 1238) DC NO 27044-SA DT. 23.03.2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED R Nonestab
18) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]() Specification : AS PER OFT REQUIREMENTS C Nonestab
19) 20MM BOLT BODY TO DRG NO 44P 03004[70]() Specification : AS PER OFT REQUIREMENTS C Nonestab
20) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]() Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle E Nonestab
21) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]() Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR C Nonestab
22) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]() Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290 C Nonestab
23) SEAR TO DRG No 2A42 05 029 C5029 WITH FIRMS MATERIAL DSCAT NO 1005 560073 ITEM TO BE MANUFACTURED THROUGH FORGING ROUTE REFER FORGING TO DRG NO 64C 5029 200 C3 LATEST DC TO BE FOLLOWED LATESE DC NO19118 DT 18 03 2008[70]() Specification : As per TE C Nonestab
24) ROCKER TO DRG NO C5025 IN FULLY FINISHED WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5025 200 E3 REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
25) CONNECTING LINK RIGID IN FULLY FINISHED TO DRG NO C5056 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5056 200 F3 REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
26) C1005 STRIP FULLY FINISHED THROUGH FORGING ROUTE DRG NO 64C 1005 200 F3 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
27) C2003 SHIELD FULLY FINISHED THROUGH FORGING ROUTE TEND 2096 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
28) SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109[70]() Specification : SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109 C Nonestab
29) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]() Specification : As per TE C Nonestab
30) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]() Specification : As per TE C Nonestab
31) MANUFACTURING OF SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2747 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM CASING C2012 RAW MATERIAL WILL BE SUPPLIED BY OFT[70]() Specification : AS per TE C Nonestab
32) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]() Specification : As per TE C Nonestab
33) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]() Specification : As per TE R Nonestab
34) C5115 CONNECTING LINK RIGID IN FULLY FINISHED THROUGH FORGING DRG NO 64C 5115 200 G3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
35) C1079 RIB FULLY FINISHED THROUGH FORGING ROUTE TEND 2097 WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
36) C1026 HOLDER FULLY FINISHED THROUGH FORGING DRG NO 64C 1026 200 E3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE R Nonestab
37) C5089 CATCH BODY FULLY FINISHED THROUGH IC DRG 64C 5089 250 H3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
38) C5014 CARRIER FULLY FINISHED THROUGH IC DRG 64C 5014 250 I3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
39) MANUFACTURING AND SUPPLY OF HOLDER IN FULLY FINISHED CONDITION TO DRG NO C2026 DS CAT NO 1005 5650452 THROUGH CASTING ROUTE WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]() Specification : As per TE C Nonestab
40) PAWL TO DRG NO C1033 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]() Specification : As per TE C Nonestab
41) C1101 EJECTOR CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
2) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
3) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]() Specification : As per TE C Nonestab
4) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]() Specification : As per TE C Nonestab
5) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
6) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
7) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
8) HOUSING TO DRG NO DS CAT NO 1005 001635 DC NO 27063 SA DT 03 05 17 WITH FIRMS MATERIAL[70]() Specification : HOUSING TO DRG NO DS CAT NO 1005 001635 DC NO 27063 SA DT 03 05 17 WITH FIRMS MATERIAL E Nonestab
9) C1054 SLIDER FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
10) SUPPORT TO DRG NO C1062 WITH FIRM MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
11) C1091 BRACKET FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
12) MANUFACTURING AND SUPPLY OF STOPPER IN FULLY FINISHED CONDITION TO DRG NO C2018 DS CAT NO 4730 007336 THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL[70]() Specification : As per TE C Nonestab
13) C3028 STOP FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
14) C1097 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
15) C1098 DOG FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE R Nonestab
16) C1107 COVER PLATE FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
17) PLATE TO PART NO 2A42 02 036 C2036 WITH FIRMS MATERIAL[70]() Specification : As per TE C Nonestab
18) C3026 ROLLER FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
19) MANUFACTURING AND SUPPLY OF BUSHING IN FULLY FINISHED CONDITION TO DRG NO C5005 THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL[70]() Specification : As per TE C Nonestab
20) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG NO C5111 THROUGH CASTING ROUTE WITH FIRMS MATERIAL[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
523 SHRI RAM AGRICULTURE EQUIPMENT COMPANY
PLOT NO 66, INDUSTRIAL AREA RICHHAI INDUSTRIAL AREA RICHHAI JABALPUR Madhya Pradesh
PIN1 : 482010
Phone No. : 2401997
GSTIN : 23AAYFS5809B1Z1 		JBPS03384D

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BOTTOM BRACKET LEAF SPRING 620 02 1220 1 C[90]() Specification : BOTTOM BRACKET (LEAF SPRING MOUNTING) DRG. NO. 620-02-1220-1/C C Nonestab
Category :
Grade : Grade III
Size : S
524 Sack International Pvt Ltd
Plot no. 638, Indl Area, Phase IX, Mohali Punjab
PIN1 : 160062
Phone No. : 5094779
GSTIN : 03AAHCS8918B1ZI 		AAHCS8918B

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) ROTATING SEARCH LIGHT AS PER ENCLOSURE[90]() Specification : ROTATING SEARCH LIGHT AS PER ENCLOSURE C Nonestab
Category :
Grade : Grade III
Size : S
525 RUBBER CRAFT INDUSTRIES
J-294, MIDC, Bhosari, Pune, Maharashtra
PIN1 : 411026
Phone No. : 020-27127191, 27121565
GSTIN : 27ADIPP3011B1Z3 		PNEJ06333F

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) RUBBER SLUGS FOR CARTG 12 BORE ANTIRIOT TO DRG NO AFK/SK-2675 SHEET NO.1() DRG NO AFK/SK-2675 SHEET NO.1 C Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Medak
Name Specification Use Status
1) ALL TYPES OF RUBBER MOULDED COMPONENTS() As per drawing C Not Estab
2) RUBBER AND METAL BONDED COMPONENTS() - do - C Not Estab
3) ALL TYPES OF SPECIAL RUBBER PRODUCTS() - do - C Not Estab
Category : P
Grade : I
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COLLAR() DRG.NO. 432.40.047-4 C Not Estab.
2) COLLAR() DRG.NO. 432.40.037-2 C Not Estab.
3) PACKING() DRG.NO. 176.31.057-1 C Not Estab.
4) COLLAR() DRG.NO. 432.40.035-3 C Not Estab.
Category : P
Grade : I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) 'O' RING 78X2 (2013436144)[20]() Specification : 'O' RING 78X2 (2013436144) C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BALL INSERT FRONT & REAR[99]() Specification : BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOP C Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
Category : p
Grade : 3
Size : S
526 HI-TEC CONSULTANTS
PLOT NO. 26, BALAJI GARDENS, R.R.V PURAM (POST), RRV. PURAM VISAKHAPATNAM Andhra Pradesh
PIN1 : 530029
Phone No. : 9705861454
GSTIN : 37ACKPR1598N1ZN 		ACKPR1598N

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) FIRING PIN ASSY TO DRG NO 9 A 621 05 020 SB Description : FIRING PIN ASSY TO DRG NO 9 A 621 05 020 SB() Specification : FIRING PIN ASSY. TO DRG. NO. 9-A-621-05-020 SB C Estab
2) BUSH TO DRG NO 9 A 621 05 015 Description : BUSH TO DRG NO 9 A 621 05 015() Specification : BUSH TO DRG NO 9-A-621.05.015 C Estab
3) LEAD CONTACT ASSY Description : LEAD CONTACT ASSY() Specification : LEAD CONTACT ASSY. TO DRG. NO. 9-A-621-05-030 SB IN F/C FOR AK-630M C Estab
Category : ddp
Grade : 3
Size : S
527 Potential Power Techniques (P) Ltd
No.96, SIDCO Industrial Estate, Kakkalur, Thiruvallur. TAMIL NADU
PIN1 : 602003
Phone No. : 044 27666626
GSTIN : 33AACCP2632A1Z6 		AACCP2632A

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Starter C5-2C() SB 20-09-02-2 E Estab.
2) Panel() 160-525H E Estab.
Category : P
Grade : II
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) STARTER C5-2C[02]() Specification : TO DRG. NO. SB 20-09-02-2 C Estab
2) Panel[02]() Specification : 160-525H C Estab
3) GENERATOR VG7500N with Fan Assy() Specification :SB 20-09-01-6 & 20-09-07 C Nonestab
Category : P
Grade : II
Size :
528 Pioneer Industrial Enterprises
Industrial Area, Shed no.-1, Aurobindo Setu, Ultadanga, Kolkata W.B
PIN1 : 700067
Phone No. : 033-23563432 		CALP16789G

Download 		1) Vehicle Factory Jabalpur

[Deemed Registration]
Name Specification Use Status
1) Metalistic Bush Pt. No.- X0500250[As per specification / Drawings]() As per specification / Drawings C Non Established
2) Moulded & Bonded Rubber items viz. S/A Bump stop, Metacone mtg. Buffer for door assy. etc.[As per specification/ Drg.]() As per specification/ Drg. c Estab.
3) Packing .- 643-01-7317-1 & 645-01-7317-1[As per specification / Drawings]() As per specification / Drawings C Established
4) Rubber for MPV/Hull/ -093A[As per specification / Drawings]() As per specification / Drawings C Non Established
5) Rubber Packing for Bracket Part No. -X-1200650[As per specification / Drawings]() As per specification / Drawings C Non Established
6) Rubber Packing for strap Part No. X-1200550[As per specification / Drawings]() As per specification / Drawings C Non Established
7) Seal Bellow Part NO. X-7400150[As per specification / Drawings]() As per specification / Drawings C Non Established
Category : P
Grade : I
Size : S
529 GRAPHIC ENTERPRISES
SHIVNERI INDUSTRIAL PREMISES, PLOT NO-94/1, SECTOR NO.10 MIDC BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 9881008529
GSTIN : 27ACDPN7256N1Z0 		ACDPN7256N

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Nonestab
2) LEVER CONTROL HAND/TORSION BAR[90]() Specification : LEVER CONTROL HAND C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SLEEVE[90]() Specification : SLEEVE C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Nonestab
2) SLEEVE[90]() Specification : SLEEVE C Nonestab
3) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Nonestab
4) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
5) BOTTOM BRACKET LEAF SPRING 620 02 1220 1 C[90]() Specification : BOTTOM BRACKET (LEAF SPRING MOUNTING) DRG. NO. 620-02-1220-1/C C Nonestab
6) BRACKET 675 57 310[90]() Specification : BRACKET DRG. NO. 675-57-310 C Nonestab
7) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
8) HEX BOLT M10X20 IS 1364[90]() Specification : HEX BOLT M10X20 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED MAKE-TVS , LPS , UNBRAKO C Nonestab
9) BOLT M20X45 MODIFICATION DRG NO OFPM 640 01 6081 1 A[90]() Specification : BOLT M20X45 (MODIFICATION) DRG.NO.OFPM 640-01-6081-1/A C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) NIC CROME PLATED RING SPA24X27[90]() Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2. C Nonestab
2) STUD[90]() Specification : STUD M 14X 1.5, PART NO. X3711915 A C Nonestab
3) WASHER PART NO F4930140[90]() Specification : WASHER WASHER DRG./PART NO.F-4930140-D REF. DRG. No.F4931140-D C Nonestab
4) Washer PART NO F4930240[90]() Specification : WASHER 22 MM. WASHER 22 MM. DRG./PART NO.F-4930240 REF DRG F 4931140 D C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) NIC CROME PLATED RING SPA24X27[90]() Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2. C Nonestab
2) STUD[90]() Specification : STUD M 14X 1.5, PART NO. X3711915 A C Nonestab
Category :
Grade : Grade III
Size : S
530 OMEX International
290, Bipin Behari Ganguly Street, 2nd Floor, Kolkata West Bengal
PIN1 : 700012
Phone No. : 033 22360293
GSTIN : 19ADUPB7871R1ZD 		ADUPB7871R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) All types of Spanners() As per Specifications E Estab.
2) All types of Pliers() As per Specifications E Not Estab
3) Bench Vices() As per Specifications E Not Estab
4) Hammers() As per Specifications E Not Estab
5) Bearing Pullers() As per Specifications E Not Estab
6) Socket / Drill Sockets / Drill bits() As per Specifications E Not Estab
Category : P
Grade : II
Size : S
531 EMC Limited
Constantia Office Complex, 11, Dr.U.N.Brahmachari Street, 8th Floor (South Block), Kolkata West Bengal
PIN1 : 700017
Phone No. : 033 22893122
GSTIN : 19AAACE7582J1Z7 		CALE00012F

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Camshaft Thrust Bearing Cap() 20-06-38 E Estab.
2) Cover() 20-01-84-3 E Estab.
3) Cover() 20-08-232-4 E Estab.
4) Top Plate() 402-95-1 C Estab.
5) Bottom plate body() 402-96-1 C Estab.
6) Half Loop() 20-01-136 C Estab.
7) Cap() 20-01-84-3 C Estab.
8) Aluminium Alloy Extruded Rods() As per Drawing and Specifications R Not Estab
Category : DP
Grade : II
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ALU ALLOY ROD 26.50MM IS733 24345WP (0611505027)[06]() Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS- R Estab
2) ALU ALLOY ROD 31.75MM IS733 64430 W (0611503032)[06]() Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 W CONDITION R Estab
3) ALU ALLOY ROD 65MM IS733 GR24345 WP (0611503065)[06]() Specification : ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP". R Estab
4) ALU ALLOY ROD 28.50MM BS1474 2014A (0619500029)[06]() Specification : ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION. R Estab
Category : P
Grade : III
Size :
1) Ordnance Factory Kanpur
Name Specification Use Status
1) ALUMINIUM ADAPTOR FORGING() AS PER DRG. NO- SK-7545/B C Not Estab.
Category : DDP
Grade : III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) ALLUMINIUM ROD 90MM X 155MM LONG FOR MUZZLE ATTACHMENT BARREL OF 12 BORE PUMP ACTION GUN.[70]() Specification : MATERIAL:-DTD 5124/AA7075 R Nonestab
2) ALLUMINIUM ROD 40MM X 145MM LONG FOR BARREL SLEEVE MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.[70]() Specification : MATERIAL:-DTD 5124/AA7075 R Nonestab
Category : p
Grade : Grade II
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) 84mm TPT PROJECTILE BODY TO GSF DRG. NO M-11229 IN FINISH MACHINED CONDITION[61]() Specification : AS PER DRG. C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Dumdum
Name Specification Use Status
1) FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION[62]() Specification : FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION R Estab
Category : ddp
Grade : Grade II
Size : L
532 MAHINDRA DEFENCE NAVAL SYSTEMS PVT. LTD.
Hissa No. 625/1/2, Behind Golden Weigh Bridge, Pune-Nasik Highway , Kuruli Pune Maharashtra
PIN1 : 410501
Phone No. : 670702 		MUMM42213D

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) A/S ROCKET RGB-12 (EMPTY) AS PER DRG. NO. NAI(V) 8200 (PROV)() DRG. NO. NAI(V) 8200 (PROV) C Estab.
2) A/S ROCKET RGB-60 EMPTY TO DRG.NO.NASK 1061(PROV) GENERAL ASSEMBLY.() DRG.NO.NASK 1061(PROV) C Not Estab.
3) 105 MM LONG RANGE CHAFF ROCKET (LRCR) (ASSEMBLED EMPTY) TO DRG. NO. NASK 760 SHEET 1 OF 2 SHTS() DRG. NO. NASK 760 SHEET 1 OF 2 SHTS C Not Estab.
4) 105 MM MEDIUM RANGE CHAFF ROCKET (MRCR) (EMPTY) TO DRG. NO. NASK 762 SHEET 1 OF 2 SHTS() DRG. NO. NASK 762 SHEET 1 OF 2 SHTS C Not Estab.
5) BODY FOR BOMB 51 MM MORT. HE 2A TO ARDE 1933 PT. NO. ITV 17SA SPECN. CQA(A) 2322() CQA(A) 2322 C Not Estab.
6) SRCR (EMPTY) (TYPE E, C & H) DRG NO. NASK 828/1() DRG NO. NASK 828/1 C Not Estab.
7) 105 MM LONG RANGE INERT ROCKET (LRIR) EMPTY ASSEMBLED AS PER DRG.NO. NASK 987() DRG.NO. NASK 987 C Not Estab.
Category : DDP
Grade : II
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB ARIAL 100 - 120 KG HE EMPTY (9911357356)() OFAJ DRG NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB100-120" TO OFK DRG.NO. KhPK-410026 (4 SHEETS). PAINTED EXTERNALLY LIGHT GREY ISC 631 OF IS-5-2007 (6th Rev) to Specn IS-168-1993 DC No. 3685-ME DT.19-03-2001 (3rd Rev) C NOT ESTABLISHED
2) AERIAL BOMB 100-120 KG RDZ (EMPTY) (9911358231)() OFAJ DRG. NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG. NO. KhPK-410026 (4 SHEETS). PAINTED EXTERNALLY TORQUOISE BLUE ISC 102 OF IS-5-2007 (6th Rev) TO Specn IS-168-1993 DC No. 3685-ME DT.19-03-2001 (3rd Rev) C NOT ESTABLISHED
3) PRE-FRAG MODULE ASSEMBLY. (9911358291)() PRE-FRAG MODULE ASSEMBLY TO DRG.NO. ARDE 08040001040000000PB, DT.14/05/2015 C Non Established
4) BOMB BODY ASSY. FOR 250KG PRE-FRAG. (9911358290)() BOMB BODY ASSEMBLY TO DRG. NO. ARDE 08040001030000000PB DT.14/05/2015 C Non Established
Category : DDP,DP
Grade : II
Size : L
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086 Description : BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086() Specification : SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PC & CONSISTING OF 29 COMPONENTS AND TO ARDESPECIFICATION NO.ARDE/SPECN/668 DATE DEC'2007 REV.3 DATE NOV.2015 FOR PRE-FRAG 100-120KG C Estab
Category : p
Grade : 1
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) 7 TYPES OF ELECTRICAL ITEMS[18]() Specification : 7 TYPES OF ELECTRICAL ITEMS E Nonestab
Category : p
Grade : Grade II
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) 14 TYPES OF ELECTRONIC ITEMS[18]() Specification : 14 TYPES OF ELECTRONIC ITEMS E Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) FACE PAD TO DRG. NO. F-1303-007190 Description : FACE PAD TO DRG. NO. F-1303-007190() Specification : FACE PAD TO DRG. NO. F-1303-007190E DOCUMENT NO. 304053433 IN FINISHED CONDITION D.C. NO-19311-W DT..02.03.2013 C Estab
2) BIPOD ASSEMBLY OR GUN MOUNT COMPLETE TO DRG F1303 028700 DOC NO 304059968 IN FINISHED CONDITION DC NO 19568 W DT 30 01 17 Description : BIPOD ASSEMBLY OR GUN MOUNT COMPLETE TO DRG F1303 028700 DOC NO 304059968 IN FINISHED CONDITION DC NO 19568 W DT 30 01 17() Specification : AS PER DRAWING C Estab
3) MAGAZINE BOX AK 630 ASSY. 01 Description : MAGAZINE BOX AK 630 ASSY. 01() Specification : AS PER REQUIRED DRG. C Estab
4) VALVE TO DRG.NO.A.O.18.03.010 IN FINISHED CONDITION Description : VALVE TO DRG.NO.A.O.18.03.010 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
5) Feed Bin Assy. AK-630M SB 03 SB Description : Feed Bin Assy. AK-630M SB 03 SB() Specification : AS PER DRG. & SPECIFICATION C Estab
6) MASK AK-630 ASSY. 103 Description : MASK AK-630 ASSY. 103() Specification : MASK AK-630 ASSY. 103 C Estab
7) POWER UNIT (FEED UNIT) AK-630 ASSY.107 Description : POWER UNIT (FEED UNIT) AK-630 ASSY.107() Specification : POWER UNIT (FEED UNIT) AK-630 ASSY.107 C Estab
8) COLLECTOR/MANIFOLD ASSY. AK-630 SB 108 SB Description : COLLECTOR/MANIFOLD ASSY. AK-630 SB 108 SB() Specification : AS PER DRAWING C Estab
9) HOSE VG (111)-10-31, 5-47-T GOST 18698-79 (REQ. FOR DRG. NO. AK-630 SB 108) IN FINISHED CONDITION (1 NO.= 7.5 MTR) Description : HOSE VG (111)-10-31, 5-47-T GOST 18698-79 (REQ. FOR DRG. NO. AK-630 SB 108) IN FINISHED CONDITION (1 NO.= 7.5 MTR)() Specification : AS PER SPECIFICATION C Estab
10) COWL(FAIRING) FOR AK- 630 GUN. Description : COWL(FAIRING) FOR AK- 630 GUN.() Specification : AS PER REQUIRED DRG.& SPECIFICATION C Estab
11) HOSE TO DRG. NO. AK-630 SB 114-14 IN FINISHED CONDITION Description : HOSE TO DRG. NO. AK-630 SB 114-14 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
12) HOSE TO DRG. NO. AK-630 SB 114-16 IN FINISHED CONDITION Description : HOSE TO DRG. NO. AK-630 SB 114-16 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
13) HOSE TO DRG. NO. AK-630 SB-114-17 IN FINISHED CONDITION Description : HOSE TO DRG. NO. AK-630 SB-114-17 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
14) DRUM ASSY. AK-630 SB 118 SB Description : DRUM ASSY. AK-630 SB 118 SB() Specification : AS PER DRAWING C Estab
15) SET OF ASSY OF POWER UNIT FOR AK 630 ASSY 107 INCL Description : SET OF ASSY OF POWER UNIT FOR AK 630 ASSY 107 INCL() Specification : SET OF ASSY. OF POWER UNIT FOR AK 630 ASSY. 107 INCL C Estab
Category : ddp
Grade : 3
Size : L
533 Ravindra Trading Company
22, Muthial Reddy Street, Alandur, CHENNAI TAMIL NADU
PIN1 : 600016
Phone No. : 044 65632780
GSTIN : 33ALGPS5068R1ZA 		ALGPS5068R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Ring Holder() 20-05-59-3 E Estab.
2) Thrust Flange() 20-05-104-2 E Estab.
Category : P
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PIN() DRG.NO.613.44.058 C NOT ESTABLISHED
Category : P
Grade : II
Size : S
534 Vijai Fasteners & Precision Works
911, Awasthi Bhawan, Canal Road, Rae Bareli Uttar Pradesh
PIN1 : 229001
Phone No. : 9415117384
GSTIN : 09AADFV2045F1ZB 		AADFV2045F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) TRADE ASSISTANCE FOR HOT DIP GALVANIZATION OF TENT COMPONENTS() AS PER REQUIREMENT & SPECIFICATION R
2) EPOXY POWDER COATING BLACK OF ALUMINIUM FRAME FOR SYNTHETIC WEB EQUIPMENT PACK ICK () AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : III
Size : S
535 Sadha Engineering Works
No.11, Nagavalli Amman Koil Street, Nandavanamettur, Kamaraj Nagar, Avadi, CHENNAI TAMIL NADU
PIN1 : 600071
Phone No. : 044 26550796
GSTIN : 33ALHPS0192F1Z7 		CHES28432F

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Access hole cover() 306-60-1 R Established
2) Air Starting Pipeline() SB 322-15-4 CB R Established
3) Adjusting Ring() 20-39-73 R Established
4) Axle() 20-01-99-2 R Established
5) Axle Housing() 3338-439-A R Established
6) Bush() 345-92 R Established
7) Bush() 3334-36-3 R Established
8) Bush() 411-19-3 R Established
9) Bushing() 20-01-138-1 R Established
10) Bushing() 20-13-71-2 R Established
11) Bushing() 20-08-244 R Established
12) Bushing() 360-26-014-02 R Established
13) Bolt() 522-125 R Established
14) Bolt() 356-84-1 R Established
15) Bolt() 584-25 R Established
16) Bolt M6x45() 356-115-3 R Established
17) Bolt M6x20() 356-84 R Established
18) Bolt M10x50() 556-09 R Established
19) Band() XL-475 R Established
20) Band() XL-225 R Established
21) Band() XP 250 P R Established
22) Block() 20-39-93 R Established
23) Balancing Shaft nut() 20-05-129 R Established
24) Cotter Pin () 354-19 R Established
25) Cotter Pin 4x36() 354-18 R Established
26) Clip of 2 pipes() 322-65 R Established
27) Clip of 3 pipes() 322-66 R Established
28) Clip of 6 pipes() 322-69 R Established
29) Cover() 20-40-02 R Established
30) Cover() 20-01-120-7 R Established
31) Cover() SB 3342-107-2 R Established
32) Cover plug() 3338-441 R Established
33) Clamp() 3335-67-1 R Established
34) Clamp() 3355-77-3 R Established
35) Clamp() 3320-270 R Established
36) Cleat() 335-15-1 R Established
37) Cap() 340-55 R Established
38) Cap of block spring() 3338-554 R Established
39) Coupling Stud() SB 301-13-1A R Established
40) Drive Bush() 3334-363 R Established
41) Drive Coupling() SB 3334-10-8 R Established
42) Elbow() 306-98-15-01 R Established
43) Fuel discharge pipe LH() SB 3334-175-5 R Established
44) Fuel discharge pipe RH() SB 3334-176-5 R Established
45) Fork for Valve Disc() 20-00-13 R Established
46) Gasket() 20-05-165 R Established
47) Gasket() 329-30-2 R Established
48) Governor Disc() 20-15-610-1 R Established
49) Hook() 467-005H R Established
50) Heating pipe Lower RH() SB 421-26 D R Established
51) Idle Gear Axle() 3348-440 R Established
52) Injector attatching nut() 20-06-71 R Established
53) Injector fastening nut() 306-71-1 R Established
54) Key 2.78mm() 312-30-51 R Established
55) Locking Ring() 411-97 R Established
56) Locking Ring() 20-01-134 R Established
57) Locking Ring() 20-01-135 R Established
58) Locking Ring() 20-05-160 to 160-05 R Established
59) Locking Ring() 326-51 R Established
60) Locking Plate() 3327-103 R Established
61) Locking Plate() 3327-104 R Established
62) Locking Wire () 354-22 R Established
63) Locking Wire Dia 1mm() GOST 792-67 R Established
64) Locking wood screw() 355-08-145 R Established
65) Lock Spring() 92-1106-232 R Established
66) Locking washer() 20-09-64 R Established
67) Locking Bush() 304-28-1 R Established
68) Lever support() 308-32-2 R Established
69) Lever pin() 308-33-2 R Established
70) Mesh() 3342-216 R Established
71) Nut() 474-106 R Established
72) Nut M8() 351-02B R Established
73) Nut M10() 3305-43 R Established
74) Nut M12-7H() X2-9891 R Established
75) Nozzle() 301-160-3 R Established
76) Oil by-pass () 20-63-24 R Established
77) Oil by-pass tube() 303-18-2 R Established
78) Oil pipe to Camshaft LH() SB 320-33-A R Established
79) Oil pipe to Camshaft RH() SB 320-32-A R Established
80) Oil Packing Ring() 3338-472 R Established
81) Oil Trap() 402-15-1 R Established
82) Plug() 20-13-115 R Established
83) Plug() 20-01-156 A R Established
84) Plug() 327-90-1 R Established
85) Pipe () SB 3342-295-2 R Established
86) Pipe () SB 3321-153-1 R Established
87) Pipe () 3342-279 R Established
88) Pipe () 20-05-62 R Established
89) Pipe () 20-13-117 R Established
90) Pipe () SB 20-20-05-4 R Established
91) Pipe Assy() SB 401-10 R Established
92) Pipe feeding Oil to Pump() SB 420-183-5 R Established
93) Pipe of 1st main Journal() 3305-59 R Established
94) Pipe Union() 412-53 R Established
95) Pipe Union() 20-01-104-8 R Established
96) Plate() 3308-90 R Established
97) Plate() 20-15-685 R Established
98) Packing Ring() 3305-26-4 R Established
99) Packing Ring() 317-22-1 R Established
100) Pin() 315-42 R Established
101) Plate clamping() 3342-224 R Established
102) Ring Stop() 20-01-85 R Established
103) Ring() 20-63-27-2 R Established
104) Ring() 20-05-152-2 R Established
105) Ring() 20-27-302 R Established
106) Ring() 326-47 R Established
107) Ring() 402-459 R Established
108) Retainer() 301-25-3 R Established
109) Retaining Ring() 407-474 R Established
110) Regulator Plate() 315-610-2A R Established
111) Screw () 356-22-1 R Established
112) Screw () 42-534 H R Established
113) Screw () 337-115 R Established
114) Screw () 356-58 R Established
115) Screw M5x12() 356-22-2 R Established
116) Sealing Ring () 337-129 R Established
117) Sealing Ring () 20-69-71 R Established
118) Setting Ring() 308-72-2 R Established
119) Socket Wrench() 330-148-3 R Established
120) Socket Wrench() 330-1019A R Established
121) Socket Wrench() 20-30-122 R Established
122) Shim() 327-89-2 R Established
123) Spring washer() 353-28 R Established
124) Starting Air Pipeline LH() SB 322-14-4 R Established
125) Starting Air Pipeline RH() SB 332-15-4 R Established
126) Spanner Assy() SB 330-1017 R Established
127) Spl Spanner() 300-173 R Established
128) Spanner for Ex.manifold() 320-69-1 R Established
129) Suction pipe() SB 402-02-1 R Established
130) Spacer() 20-01-59-1 R Established
131) Shield() 420-55-A R Established
132) Stud M8x30() 550-111 R Established
133) Swivel Elbow() 20-29-18 R Established
134) Servo Piston Ring() 20-34-110 R Established
135) Supporting ring() 3305-18 R Established
136) Tommy Bar() 330-723 R Established
137) Tappet() 20-27-51 R Established
138) Tapper Pin() 304-30 R Established
139) Tie rod () BM 200109 R Established
140) Tie rod () 334-77-1 R Established
141) Tie rod shaft() 334-24 R Established
142) Tight fitting Bolt() 356-79 R Established
143) Torque Wrench for Injector() SB 330-483-1 R Established
144) Tube for Oil discharge to cleaner() SB 3320-85 R Established
145) Tommy Bar Dia 10() 330-125-1 R Established
146) Union Nut() 345-21 R Established
147) Union pipe Elbow() 306-103-1 R Established
148) Valve Body() 312-08 R Established
149) Governor Lever Axle() 315-618 A R Established
150) Washer() 310-18-1 R Established
151) Washer() 20-15-659 R Established
152) Washer() 20-11-85 R Established
153) Washer() 315-639 R Established
154) Washer() 411-48-2 R Established
155) Washer() X3-9509 R Established
156) Washer() 317-60 R Established
157) Washer() 340 2S-1.5-8-16KD R Established
158) Washer() 5M-1184 R Established
159) Washer() 553-02-1 R Established
160) Washer 12() 20-53-08 R Established
161) Thrust Washer() 334-79 R Established
162) Wood Screw lock() 356-90 R Established
Category : DP
Grade : II
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) PIPE V46[62]() Specification : PIPE TO DRG NO SB 435-09-14 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) AIR STARTING PIPE LINE[62] TO DRG.NO. SB 322-00-9() Specification : SB 322-00-9 C Estab
2) PIPE TO FUEL PUMP[62] TO DRG.NO. SB 3335-07-19() Specification : SB 3335-07-19 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) COMPRESSED AIR STARTING TUBING ASSY [62] TO DRG.NO.SB 322-00-9() Specification : COMPRESSED AIR STARTING TUBING ASSY TO DRG.NO.SB 322-00-9 C Estab
2) PIPE TO FUEL PUMP [62] TO DRG NO. SB 3335-07-19() Specification : PIPE TO FUEL PUMP TO DRG NO. SB 3335-07-19 C Estab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ALL TYPES OF METALLIC PIPELINES[62]() Specification : ALL TYPES OF METALLIC PIPELINES E Nonestab
Category : p
Grade : Grade I
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) PIPELINE[62]() Specification : PIPE LINE TO DRG NO.SB 3335-12-19 C Estab
Category :
Grade : Grade III
Size : S
536 INDO AUTOTECH LIMITED,
PLOT NO. 332-338, SECTOR - 24, FARIDABAD HARIYANA
PIN1 : 121005
Phone No. : 09971499488
GSTIN : 06AABCI6282N2Z5 		AABCI6282N

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) LINK FOR HANDLE() AS PER DRG./SPECIFICATION C ESTAB.
2) BOTTOM FRAME FOR CARRIER 13A() AS PER DRG./SPECIFICATION C ESTAB.
3) TOP FRAME FOR CARRIER 13A() AS PER DRG./SPECIFICATION C ESTAB.
4) HINGE PIN() AS PER DRG./SPECIFICATION C ESTAB.
5) LINK HOLDING END FOR BOX H2A() AS PER DRG./SPECIFICATION C ESTAB.
6) ANGLE PLATE VERTICAL() AS PER DRG./SPECIFICATION C ESTAB.
7) HANDLE CLIP FOR BOX H5A() AS PER DRG./SPECIFICATION C ESTAB.
8) BRACKET A-1 FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
9) BRACKET CARTRIDGE FRONT FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
10) BRACKET B-2 FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
11) BOTTOM CORNER PIECE FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
12) LID CORNER PIECE FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
13) SUB-ASSLY. OF LINK & HANDLE() AS PER DRG./SPECIFICATION C ESTAB.
14) CATCH PLATE (WITH ASSLY.) FOR BOX H2A() AS PER DRG./SPECIFICATION C ESTAB.
15) PIECE PACKING - A() AS PER DRG./SPECIFICATION C ESTAB.
16) PIECE PACKING - B() AS PER DRG./SPECIFICATIONC C ESTAB.
Category : DDP
Grade : I
Size : L
537 Maan Aluminium Limited
4/5, First Floor, Asaf Ali Road, New Delhi, New Delhi
PIN1 : 110002
Phone No. : 011-40081830
GSTIN : 23AAFCM0088C1ZX 		BPLM07361E

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) ALUMINIUM ALLOY RODS OR ROUNDS OR WIRES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
2) ALUMINIUM ALLOY TUBES OR PIPES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
3) ALUMINIUM ALLOY BARS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
4) ALUMINIUM ALLOY CHANNELS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : II
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) ALUMINIUM ALLOY ROD 32 MM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) ALUMINIUM ALLOY TUBE 35.5MM O/D X 5.00MMW.T (IN M/L OF 2.28MTR)[21]() Specification : IS : 1285 - LATEST,DESIGN. 64430 WP CONDITION R Estab
3) ALUMINIUM ALLOY TUBE 38.1 MM O/D X 1.27 MM W.T. IN M/L OF 1.41 MTRS.[21]() Specification : IS:1285-LATEST , ALLOY DESIG. 64430 CONDN. W.P. R Estab
4) ALUMINIUM ALLOY TUBE 38.10 MM OD X 1.27 MM W.T. (IN M/L OF 1.71 MTR)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) ALUMINIUM ALLOY TUBE 38.10MM O/D X 1.27MM W.T (IN M/L OF 2.01 MTR)[21]() Specification : IS : 1285 - 1968 DESIGN HV or HV 30 WP R Estab
6) ALUMINIUM ALLOY TUBE 38.10MM O/D X 1.27MM W.T (IN M/L OF 2.61MTR)[21]() Specification : IS : 1285 - 1968 DESIGN HV or HV 30 WP R Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) ALUMINIUM ALLOY ROD 38.10MM +/- 0.30MM DIA[21]() Specification : IS733 DESGN.HE19WP OR HE 30 WP R Estab
2) ALUMINIUM ALLOY TUBE 22 MM O/D X 2.5 MM W.T. ML OF 2.09 MTR.[21]() Specification : IS : 1285 DESIGN HV 19 WP OR HV 30 WP R Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) ALUMINIUM ALLOY BARS VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) ALUMINIUM ALLOY CHANNELS VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) ALUMINIUM ALLOY TUBES OR PIPES VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
4) ALUMINIUM ALLOY RODS OR ROUNDS VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) ALUMINIUM ALLOY RODS OR ROUNDS OR WIRES VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : L
538 INDOSWE
No.4, M.I.D.C, Bhosari Industrial Estate, P.O.Box-47, Pune. MAHARASHTRA
PIN1 : 411026
Phone No. : 020 27120952
GSTIN : 27AAACI3918C1ZX 		AAACI3918C

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Bronze BPAX9-4 45mm Dia() 306-75-3 R Estab.
2) Alu Bronze Rod Dia 55mm() 20-01-160-4 R Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BRASS TUBE 22.35X16.70MM BS2871 M (0717559001) Description : BRASS TUBE 22.35X16.70MM BS2871 M (0717559001)() Specification : SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION. (STRESS RELIEVED). R Estab
Category : p
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) AL BRONZE 100MM DIA BAR BP AZHMTS TO 0737600100 Description : AL BRONZE 100MM DIA BAR BP AZHMTS TO 0737600100() Specification : GOST:1628(100MM) R Nonestab
2) AL BRONZE 12MM DIA GR BRAZH MTS 10 3 1 5 GOST 1628 78 EXTRUDED DRAWN ROUND TO 0737600012 Description : AL BRONZE 12MM DIA GR BRAZH MTS 10 3 1 5 GOST 1628 78 EXTRUDED DRAWN ROUND TO 0737600012() Specification : GOST:18175-78(12MM) R Estab
3) ALU BRONZE 66MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600066 Description : ALU BRONZE 66MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600066() Specification : GOST:18175-78(66MM) R Estab
4) BLOCK bP AZHMTS 10 3 1 5 GOST 18175 72 TO 3996412057 Description : BLOCK bP AZHMTS 10 3 1 5 GOST 18175 72 TO 3996412057() Specification : 175.52.041/F/PL R Estab
Category : p
Grade : 2
Size : S
539 J.M. INDUSTRIES
A-6, Bajrangbali Industrial Estate, Panki Site IV, Kanpur, Uttar Pradesh
PIN1 : 208022
Phone No. : Mob. 09935337574
GSTIN : 09ADDPJ9625Q1ZT 		KNPJ01508D

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMUNITION CONTAINER (BOX) H 2 A/L STEEL, DES. REF. CIA/AMMN/468,PT. NO. ISV 296-A SPECN. IA 1169() IA 1169 C Not Estab.
Category : P
Grade : II
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Silencer Assy for JVPC[70]() Specification : Silencer Assy. for JVPC 5.56MM Drg.No-0204-04-01-00-00-000-00DA (I/Code - 7012470196) C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PLUG FOR FIRING DEVICE 1B FOR MINE[70]() Specification : PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) WASHER PLUG FOR MAG[70]() Specification : DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA[70]() Specification : SILENCER JVPC 5.56MM DRG.NO-0204-04-01-00-00-000-00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]() Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]() Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-03-02-15-000-00DC C Nonestab
2) Body Housing Upper Welding for JVPC[70]() Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]() Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) HOUSING TRIGGER OF LMG BELT FED[70]() Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED,DRG NO.SK-5817. C Nonestab
2) AMMUNITION POUCH FOR LMG[72]() Specification : AMMUNITION POUCH FOR LMG 7. 62 MM BELT FED . AS PER DRG.NO.1804 03 00 00 00 000 00DA. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) AMMN.CONTAINER BOX C-44A(STEEL)() DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO:220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012. C Not Estab
Category : P
Grade : III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) LID CORNER PIECE FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
2) BRACKET CARTG. REAR FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
3) HANDLE & HANDLE CLIP ASSLY/1466A() AS PER DRAWING/SPECIFICATION. R ESTAB.
4) BRACKET B-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
5) ENGAGING PLATE FOR BOX H2A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
6) HANDLE & HANDLE CLIP ASSLY/1564 ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
7) BRACKET A-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
8) BRACKET FOR AMMN. BOX SM-601-C() AS PER DRAWING/SPECIFICATION. R ESTAB.
9) BOTTOM SUPPORT PIECE BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
10) CATCH PLATE (WITHOUT ASSLY) ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
11) BRACKET B-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
12) BRACKET CARTG. FRONT BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
13) CHANNEL FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
14) PIECE PACKING FOR BOX SM-601-C ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
15) PIECE PACKING - A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
16) PIECE PACKING - B ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
17) CARRYING LINK DRG. OFB/C/1540A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
18) BRACKET A-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
19) CENTER PARTITION FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
20) BRACKET END FOR SHELL BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
21) LID CORNER PIECE FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
22) BRACKET CARTG. REAR FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
23) HANDLE & HANDLE CLIP ASSLY/1466A() AS PER DRAWING/SPECIFICATION. R ESTAB.
24) BRACKET B-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
25) ENGAGING PLATE FOR BOX H2A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
26) HANDLE & HANDLE CLIP ASSLY/1564 ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
27) BRACKET A-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
28) BRACKET FOR AMMN. BOX SM-601-C() AS PER DRAWING/SPECIFICATION. R ESTAB.
29) BOTTOM SUPPORT PIECE BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
30) CATCH PLATE (WITHOUT ASSLY) ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
31) BRACKET B-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
32) BRACKET CARTG. FRONT BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
33) CHANNEL FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
34) PIECE PACKING FOR BOX SM-601-C ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
35) PIECE PACKING - A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
36) PIECE PACKING - B ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
37) CARRYING LINK DRG. OFB/C/1540A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
38) BRACKET A-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
39) CENTER PARTITION FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
40) BRACKET END FOR SHELL BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
Category : DP
Grade : III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) LID CORNER PIECE FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
2) BRACKET CARTG. REAR FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
3) HANDLE & HANDLE CLIP ASSLY/1466A() AS PER DRAWING/SPECIFICATION. R ESTAB.
4) BRACKET B-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
5) ENGAGING PLATE FOR BOX H2A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
6) HANDLE & HANDLE CLIP ASSLY/1564 ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
7) BRACKET A-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
8) BRACKET FOR AMMN. BOX SM-601-C() AS PER DRAWING/SPECIFICATION. R ESTAB.
9) BOTTOM SUPPORT PIECE BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
10) CATCH PLATE (WITHOUT ASSLY) ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
11) BRACKET B-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
12) BRACKET CARTG. FRONT BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
13) CHANNEL FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
14) PIECE PACKING FOR BOX SM-601-C ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
15) PIECE PACKING - A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
16) PIECE PACKING - B ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
17) CARRYING LINK DRG. OFB/C/1540A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
18) BRACKET A-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
19) CENTER PARTITION FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
20) BRACKET END FOR SHELL BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
21) LID CORNER PIECE FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
22) BRACKET CARTG. REAR FOR BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
23) HANDLE & HANDLE CLIP ASSLY/1466A() AS PER DRAWING/SPECIFICATION. R ESTAB.
24) BRACKET B-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
25) ENGAGING PLATE FOR BOX H2A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
26) HANDLE & HANDLE CLIP ASSLY/1564 ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
27) BRACKET A-2 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
28) BRACKET FOR AMMN. BOX SM-601-C() AS PER DRAWING/SPECIFICATION. R ESTAB.
29) BOTTOM SUPPORT PIECE BOX C-53A() AS PER DRAWING/SPECIFICATION. R ESTAB.
30) CATCH PLATE (WITHOUT ASSLY) ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
31) BRACKET B-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
32) BRACKET CARTG. FRONT BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
33) CHANNEL FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
34) PIECE PACKING FOR BOX SM-601-C ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
35) PIECE PACKING - A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
36) PIECE PACKING - B ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
37) CARRYING LINK DRG. OFB/C/1540A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
38) BRACKET A-1 FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
39) CENTER PARTITION FOR BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
40) BRACKET END FOR SHELL BOX C-53A ETC.() AS PER DRAWING/SPECIFICATION. R ESTAB.
Category : DP
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]() Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Stem Roller[70]() Specification : As per Drawing C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Block Gas in finish condition for MAG[70]() Specification : Block Gas in finish condition as per D. S. CAT No. 1005-006815 for MAG 7.62mm (Bore Size Dia 23.021 to 23.037mm) C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SPRING AS PER DRAWING NO SK 6517 TE[70]() Specification : SPRING AS PER DRAWING NO SK 6517 TE C Nonestab
2) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]() Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE C Nonestab
3) SCREW AS PER DRAWING NO SK 6506 TE[70]() Specification : SCREW AS PER DRAWING NO SK 6506 TE C Nonestab
4) LATCH AS PER DRAWING NO SK 6519 TE[70]() Specification : LATCH AS PER DRAWING NO SK 6519 TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Trigger guard[70]() Specification : AS PER DRG. DS CAT No. 1005-00060 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC[70]() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Nonestab
2) PIN LOCKING HAND GUARD FOR JVPC[70]() Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Steel Blank of Receiver Plate[01]() Specification : Steel Blank of Receiver Plate Left & Right to Drg. SKM-960* R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) FRAME TRIGGER for MAG[70]() Specification : FRAME TRIGGER DS CAT NO.1005 - 006602 DC(I)NO.25317-SA DT.03.04.2002 IN FINISHED CONDITION W/O ANODISING. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ROD CLEANING SMALL ARMS[70]() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) TOOL ADJUSTING SIGHT ASSY[70]() Specification : TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) TOOL REMOVING RUPTURED CARTRIDGE CASE[70]() Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SLIDE DRG No SK 6534 TE[70]() Specification : SLIDE DRG No SK-6534/TE C Nonestab
2) LATCH DRG No SK 6535 TE[70]() Specification : LATCH DRG No SK- 6535 /TE C Nonestab
3) PIN DRG No SK 6531 TE[70]() Specification : PIN DRG No SK- 6531/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BOX MAGAZINE Description : BOX MAGAZINE() Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08 C Estab
2) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION() Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 C Estab
3) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : AS PER DRG. C Estab
4) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6570850706 BOX B7A "OLIEVE GREEN" Description : 6570850706 BOX B7A "OLIEVE GREEN"() Specification : SPECN. NO. IA 1169 E Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUCKLE ASSEMBLY FOR SMALL ARMS Description : BUCKLE ASSEMBLY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56 Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56() Specification : PIN LOCK SEAR SAFETY TO DRG.NO- ARDE/SK-3143/44 DS CAT NO.5315-009215 DC(I)NO.26934-SA DT.07.09.16. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) AMMUNITION POUCH FOR GPMG[70]() Specification : AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251*1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FORJVPC[70]() Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-04-02-14-000-00DA C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PEGS NIGHT LINE MG MK I[70]() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION.[70]() Specification : CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
540 JAGTAR SINGH & SONS HYDRAULICS (P) LTD
PLOT 46, PHASE-1 NANGALI SAKRAWATI EXTN. NAJAFGARH Delhi
PIN1 : 110043
Phone No. : 25458355 		AACCJ2805M

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) ALL TYPES OF HYDRAULIC CYLINDER UPTO WORKING PRESSURE 600 BAR() As GCF Spcn./Drg./Size & requirements C Not Estab
Category : DDP,DP
Grade : I,II
Size : S