List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
581 Padamchand Milapchand Jain
10/237/D/6,Behind sakharpe Hospital Behind sakharpe Hospital Ichalkaranji Maharashtra
PIN1 : 416115
Phone No. : 2435478
GSTIN : 27ABAPJ6674L1Z9 		ABAPJ6674L

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Cotton Light Blue 142cms. [21]() Specification : IS:2970 Type-II R Nonestab
2) CLOTH POLYESTER & COTTON COMBINATION OF PLAIN WEAVE AND MODIFIED PLAIN WEAVE SAGE GREEN 150 CM WIDTH (MINIMUM WIDTH EXCLUDING SELVEDGES).[21]() Specification : IAFS 09149:2016 WITH AMDT NO.5. REFER ATTACHED DOCUMENT "SPECIFICATION" R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Cotton Poplin Light Blue 150 cm width excluding selvedges[21]() Specification : NO.IS:188-2004 V.NO.2 R Nonestab
2) Cloth Polyester Filament Woven Light Blue-150cm width (minimum width excluding selvedges[21]() Specification : As per Specification & Requirement R Nonestab
3) Cloth Plain Weave Polyester and Viscose Dope Dyed Dark Blue Grey 148cms width minimum excluding selvedges[21]() Specification : No.IAFS 01053:2015 with Amendment No.1 R Nonestab
4) Cloth Drill Cotton Greenish Khaki 142 cms minimum excluding selvedges[21]() Specification : NO.VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014 R Nonestab
5) Cloth Mercerised Cotton Light OG 142 cms minimum width excluding selvedges[21]() Specification : NO.IND/TC/1201 R Nonestab
6) Cloth Plain Weave Polyester and Viscose Dope Dyed khaki 150 cm minimum width excluding selvedges[21]() Specification : NO.IND/TC/0048(g) R Nonestab
7) Cloth Polyester Filament Woven Dark Blue 150 cm width minimum width excluding selvedges[21]() Specification : CLOTH POLYESTER FILAMENT WOVEN DARK BLUE 150 CM WIDTH MINIMUM EXCLUDING SELVEDGES AS PER SPECIFICATION ATTACHED R Nonestab
8) Cloth Plain Weave Polyester and Viscose Dope Dyed Light Blue 148 cm width minimum excluding selvedges for Summer Uniform[21]() Specification : IAFS 01030 : 2015 with Amendment No.2 R Nonestab
9) Cloth Plain Weave Polyester and Cotton White 138 cms width minimum excluding selvedges[21]() Specification : No.IND/TC/0042 (f) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH DRILL COTTON NAVY BLUE 142 CMS V NO 4 MINIMUM EXCLUDING SELVEDGES NHQ[21]() Specification : SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) FABRIC 410 GMS WP PV DOPE DYED RIP STOP 148 CMS[21]() Specification : IND/TC/2562 R Nonestab
2) FABRIC PLAIN WEAVE FLAME RETARDANT BLUE 150 CM WIDTH EXCLUDING SELVEDGES[21]() Specification : 1201908/001 R Nonestab
3) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]() Specification : AS PER ENCLOSED SPECIFICATION R Nonestab
4) CLOTH Plain Weave Polyester and Cotton Grey 138 cm Width Min Excluding Selvedges[21]() Specification : IND/TC/0042/F R Nonestab
5) CLOTH DRILL COTTON KHAKI 142 CM V NO 3 MINIMUM WIDTH EXCLUDING SELVEDGES[21]() Specification : IS:177-1989 (IV REVISION) REAFFIRMED 2014 CONFIRMING TO V.NO.3 R Nonestab
6) CLOTH DRILL COTTON DARK GREY 142 CMS WIDTH EXCLUDING SELVEDGES[21]() Specification : variety no 3 of IS: 177-1989 ( FOURTH REVISION) R Nonestab
7) CLOTH NYLON COTTON 50 50 WITH CAMOUFLAGE PRINT 200 GSM[21]() Specification : PROVISIONAL SPEC NO. OCFAV/FABRIC/NYCO/001 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Nonestab
2) FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM[2101221970]() Specification : SPECIFICATION : ADRDE/SPECN/2002/56(b) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230 GM OG 91 4 CMS[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) NIV FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM PROV[2101221257]() Specification : SPECN.NO.IND/TC/2562 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC COTTON CW 310 GM OG 91 4 CMS[2101211938]() Specification : JSS: 8305-05 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) COTTON FABRIC FOR SD PARA 91point4 CM[2101462435]() Specification : COTTON FABRIC FOR S.D. PARACHUTE type II of IS:2970-1987 Reffirmed 2004 There shall be no presence of starch in appearance workmanship and finish and other respects not denined in the specification the material shall conform to the sealed R Nonestab
2) FABRIC COTTON MERCERISED 140 GM U D 136 4 CM[2101221983]() Specification : SPECN. NO. IS:514.GRADE -1. R Nonestab
3) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Nonestab
4) CANVAS NYLON 425 GM GREY WIDTH 105 CM[2101126375]() Specification : SPECN-ADRDE/SPECN/1984/23(b) R Nonestab
5) FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 R Nonestab
6) FABRIC COTTON 340 GM DUCK COTTON OG 92cm MINIMUM[2101221293]() Specification : Specification IS:1422-1983 R Nonestab
7) CANVAS COTTON 407GM LOD 105 CM[2101126365]() Specification : CANVAS COTTON 407 GM LOD IND/ADE/0087 Except That:- 1-Weight, gsm – 407+-5%. 2-Count of yarn :-Warp :-2 ply of 20s Single yarn Warp :-3 ply of 24s Single yarn (Note: The count of single yarn is approximate R Nonestab
8) BLENDED FABRIC POLYESTER AND COTTON 67 33 UNDYED FOR SUPPLY DROPPING PARACHUTES[2101221360]() Specification : Specification No. IND/TC/3038 With conditions attached as Appendix 'A' R Nonestab
9) NIV FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM PROV[2101221257]() Specification : SPECN.NO.IND/TC/2562 R Nonestab
10) DUCK NYLON FABRIC BLACK 230 GM[2101138893]() Specification : ADRDE/SPECN/1984/23(a) EXCEPT THE COLOUR WILL BE BLACK INSTEAD OF OG R Nonestab
11) Fabric cotton grey mercerized 95 117 gsm[2101222001]() Specification : ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm. R Nonestab
12) FABRIC NYLON 190 GSM UNDYED[2101222002]() Specification : ADRDE/QMS/TGTE/F/2019/03 Dated 16/05/2019 R Nonestab
13) CLOTH COTTON DRILL WHITE VARIETY NO 3 148 CM[2101126428]() Specification : IS 177:1989, FOURTH REVISION WITH AMENDMENT NO.3 R Nonestab
14) FABRIC NYLON LT WT 37g RIP STOP WEAVE OLIVE DRAB SHADE NO 298 AS PER SPECN NO IS 5 1994 94 CM WIDTH[2101221982]() Specification : SPECIFICATION NO. IS:4726-1984. EXCEPT THAT:- i) page 4, clause 2.2.1, third line has been deleted from IS. ii) page 7, table 1, note 2 has been amended as given FOR:- 210 g/sq.cm READ:- 200 g/sq.cm R Nonestab
15) Fabric Nylon 32 Gm Undyed 107 Cm Minimum Width Excluding Selvedge[2101221287]() Specification : FABRIC NYLON 32GM U/D 107CM MINIMUM WIDTH EXCLUDING SELVEDGE ADRDE/QMS/TDTM/SPECN/95 WITH FOLLOWING NOTE:- (i) THE NYLON MULTIFILAMENT YARN WHICH IS TO BE USED TO MANUFACTURE THE FABRIC SHOULD HAVE A MINIMUM TENACITY OF 6.5GMS PER D R Nonestab
16) FABRIC NYLON 66 90 3 gm UD[2101221365]() Specification : ADRDE/QMS/TDTM/F/2013/01 (a), dtd. 03.01.2020 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth PC Disruptive (250 GSM) with Army Logo() PROV/OCFAV/FABRIC/001(a) R Not Estab.
2) Cloth PW PV DD Khaki 150 CM() IND/TC/0048 (f) & (g) R Not Estab.
3) Fabric 410 G WP PV DD Ripstop 148 cm() PROV/S/4369/FWP PV/RIP/TC-11/1(a) R Not Estab.
4) Fabric Green 205gms Spun PV Blended DD 148cm() PROV/S/4369/FABRIC GREEN PV/TC-11/2(a) R Not Estab.
5) Cloth PW PV DD Darker OG 150 cm() IND/TC/0048(c) & (f) R Not Estab.
6) Cloth Drill Cotton Dark Grey 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
7) Cloth Mercerised Cotton Light OG 142 CM (Minimum) Excluding Selvedges() PROV/OCFAV/Fabric/004 R Not Estab.
8) Fabric Twill Weave PC Disruptive 150 cm AL() PROV/S/2599/TC-11/2009/01 R Not Estab.
9) Cloth Twill Weave PC Disrup. 250 GSM Greenish Khaki 150 cm() PROV/S/2599/TC-11/2009/02 R Not Estab.
10) Cloth Calico Cotton White 91 cm() IS: 1544-1973 R Not Estab.
11) Cloth Mockleno Weave Polyester & Cotton Black 150 cm() Prov/OCFAV/Fabric/005 R Not Estab.
12) Cloth PC Disruptive (220 GSM) with Indian Army Logo() As per Specification & Requirement R Not Estab.
13) Cloth PC Disruptive (220 GSM) with Indian Army Logo with Colour Values() As per Specification & Requirement R Not Estab.
14) Cloth Polyester & Cotton (20:80) Greenish Khaki (250GSM) 152cm (minimum) excluding selvedges for Navy() PROV/OCFAV/FABRIC/001(a) without Disruptive Pattern R Not Estab.
15) Cloth Drill Cotton Greenish Khaki 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
16) Cloth Cotton Poplin Light Blue 150 cm() IS: 188-2004 (V.No.2) R Not Estab.
17) Cloth Drill Cotton White Bleached 142cm() VARIETY NO. 3 OF IS 177:1989 ( FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
18) Cloth Cotton Light Blue 142cm() SPECIFICATION: TYPE 2 OF IS:2970-87,REAFFFIRMED 2004 (FIRST REVISION) EXCEPT FOR AIR POROSITY. R Not Estab.
19) Cloth Shirting PV (67:33) Light Blue 148cm() IAFS 01077:2010. R Not Estab.
20) Cloth PW PC Deep Brown 150 CM() AIR HQ/DQAS/MG - 082 (REVISED 2004 ) R Not Estab.
21) Cloth PW PV DD Dark Blue Grey 148 cm() AIR HQ/DQAS/AC-053 R Not Estab.
22) Cloth PW PV DD Light Blue 148 cm() IAFS 01030:2015 R Not Estab.
23) Cloth Drill Cotton White Bleached 91 Cm() IS: 177-1989 AND (IV TH REV.)RE-AFFIR.1997,V.NO.3 R Not Estab.
Category : DDP
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21]() Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH COTTON DOSSUTI BLUE 91 CMS[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) COTTON FABRIC SCOURED FOR S.D PARCHUTE TYPE - I 91 CMS.[21]() Specification : IS: 2970-1987 (REAFF. 1999) (FIRST REV.) R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH COTTON DOSSUTI KHAKI 91 CMS WIDE[21]() Specification : IS :179-1977 (REAFF. 1997) EDITION 3.5 (1998-05) V.NO.4 R Estab
2) FABRIC COTTON O.G.W.R. FOR CAPS WP 91 C M[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS. WIDE[21]() Specification : IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Estab
4) FABRIC COTTON 50 GM OG 100 CMS WIDE.[21]() Specification : DMSRDE/T&GS/97/415/TEX-4/3(b) R Estab
5) FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CM[21]() Specification : IS: 2422 VERIETY 4 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC COTTON DYED WATER REPELLENT 275 GSM OG 91 CMS. WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) Canvas Cotton 410 gms. OG WP 91 cms.[21]() Specification : IS:1424-1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972 R Estab
3) Canvas Cotton 545 gms. Scoured 91 cms.[21]() Specification : IS:1424 (VARIETY NO. 3) & MODIFICATION AS PER ANNX.-A R Estab
4) LONG CLOTH RED 91 CM WIDE[21]() Specification : IS: 187-1987 (V.NO.01) R Estab
5) CANVAS COTTON 680 GM. O.G 91 CM.[21]() Specification : IS: 1424 (VARIETY NO. 2) & IS:6803 FOR WTPRF. MODIFICATION AS PER ANNX "A" R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) Drill Cotton Disruptive Pattern VAT Printed Mineral khaki 142 cms[21]() Specification : IND/ME/975(Prov) R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) NYLON FABRIC 125 GMS. O.G. W.R. 91 CMS[21]() Specification : IND/TC/3020 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur

Debarred
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm [21] as sole selling agent of M/s Kanchan India Limited, Bhilwara() IND/TC/0048(g) R Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Three Layer WP Breathable Fabric Dual Shade OG White 118 cm width[21]() Specification : Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1 R Estab
2) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]() Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN. SPECIFICATION:- JSS 8305-32-2003 R Estab
3) Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width[21]() Specification : Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11 R Estab
4) Drill Cotton Proofed White Bleached 71 cm[21]() Specification : IND/TC/097 (c) R Estab
5) 100 Percent Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min[21]() Specification : 100% Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min specification :-Appendix "B" of Provisional Specification No. S/2594/C/CCWDCP/TC-15(a). Pantone Shade No 19-55513 TPX R Estab
6) Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm[21]() Specification : Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification. R Estab
7) FABRIC NYLON 300 GSM RIPSTOP PU COATED F R 152 CMS WIDE[21]() Specification : FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a) R Estab
8) 100 PERCENT POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN[21]() Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN. APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER R Estab
9) 100 Percent Nylon micro filament woven fabric olive green 50 GSM width 150 cm min[21]() Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.) Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer R Estab
10) FABRIC POLYESTER WHITE WIND CHEATER 115 GSM WIDTH 150CM MIN[21]() Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC (a) R Estab
11) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]() Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX. SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT R Estab
12) OUTER AND INNER SHELL NYLON FABRIC INNER JACKET NYLON 60 GSM WIDTH 150 CM MIN PANTONE SHADE NO 19 0511 TPX[21]() Specification : OUTER AND INNER SHELL NYLON FABRIC (INNER JACKET) NYLON 60 GSM WIDTH 150 CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX SPECIFICATION :- AS PER APPENDIX 'E' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC (a) R Estab
13) INNER LINING KNITTED FABRIC OUTER JACKET POLYESTER 145 GSM WIDTH 150 CM MIN[21]() Specification : INNER LINING KNITTED FABRIC (OUTER JACKET) POLYESTER 145 GSM WIDTH 150 CM. (MIN.) PANTONE SHADE NO. 19-0516 TPX SPECIFICATION :- AS PER APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC (a) R Estab
14) CLOTH DRILL COTTON DISRUPTIVE PATTERN VAT PRINTED FOR BANDOLIERS WIDTH 142 CM MIN[21]() Specification : CLOTH DRILL COTTON DISRUPTIVE PATTERN (VAT PRINTED) FOR BANDOLIERS WIDTH 142 CM (MIN.) SPECIFICATION NO. JSS 8315-08:2021 (THIRD REVISION) R Estab
15) FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min[21]() Specification : FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min SPECIFICATION APPENDIX A provisional specification No S/2594/C/CCWDCP/TC 15(a) Pantone shade No of outer camouflage fabric 191015 TCX R Estab
16) fabric polyester plain weave 110g olive green width 150cm min[21]() Specification : fabric polyester plain weave 110g olive green width 150cm min Specification appendix D of provisional specification No S/2594/C/CCWDCP/TC-15(a) with pantone shade 19-5513 TPX R Estab
Category :
Grade : Grade III
Size : M
582 PERFECT YANTRAUDYOG
45 KARIM NAGAR HAPUR ROAD MEERUT Uttar Pradesh
PIN1 : 250002
Phone No. : 847490079
GSTIN : 09AEGPA0118K1ZV 		AEGPA0118K

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]() Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T C Nonestab
2) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]() Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) PROTECTING RING ASSY. 1000 LB() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) PROTECTING RING ASSY. 1000LB[62]() Specification : AS PER OFM SPECIFICATION R Nonestab
2) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
3) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
4) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
5) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
Category : P
Grade : III
Size :
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
2) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
3) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
4) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
5) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
2) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
3) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
4) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
5) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Nonestab
6) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
7) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
8) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) WASHER TO DRG NO 1172 A 17 FOR 1000 LBS L F NO 6220901111[62]() Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY C Nonestab
2) WASHER FOR NOSE PLUG FOR 1000 LBS L F NO 6220901052[62]() Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002, OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM. C Nonestab
3) WASHER RUBBER 250 KG BOMB L F NO 6240901300[62]() Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO-PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED].FOR 250 KG HSLD BOMB. C Nonestab
4) NEOPRENE RUBBER WASHER 450 KG L F NO 6231401501[62]() Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG.NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY C Nonestab
5) O RING I D 38 0 250 KG L F NO 6241101204[62]() Specification : O RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]() Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED C Nonestab
Category :
Grade : Grade III
Size : S
583 MUNISH FORGE PVT. LTD.
VILLAGE GOBINDGARH, ADJOINING PHASE VII FOCAL POINT LUDHIANA Punjab
PIN1 : 141010
Phone No. : 5218900
GSTIN : 03AABCM2155Q1ZE 		JLDM01577C

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]() Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A C Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) T.A. LINK (COMPLETE)() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) FILLING PLUG FORGING 1000LB() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) FORGING FOR TA GUIDE() AS PER OFM SPECIFICATION C NOT ESTABLISHED
4) FORGED BODY FOR 81MM BOMB MORTAR-C() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : P
Grade : I
Size : L
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Proof Machined Body for 51 MM HE() As Per Drg. No- SK- 8345/C C Not Estab.
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY ASSY. FOR 250KG PRE-FRAG.[99]() Specification : BOMB BODY ASSEMBLY TO DRG. NO. ARDE 08040001030000000PB DT.14/05/2015. C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) MACHINING OF FORGED CANISTER[63]() Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address : Govt. Of India, Ministry of Defence (DGQA) Controllerate of Quality Assurance (Amn), Khadki, Pune- 411 003 Telephone: 25824013-1 C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2440A13003 DC-36552-A C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY[99]() Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB. E Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 450 KG HSLD EMPTY ASSY ARDE-2122[99]() Specification : HIGH SPEED LOW DRAG , 450 KG MC/HE, A/C BOMB EMPTY ASSEMBLY TO DRG NO ARDE-2122 DETAIL-1, 2SHEET- SHEET NO.1 R.NO.1DT.7-3-91 & 2 DT.11-04-07. SHEET NO 2 R.1 DT.7-3-91 & 2 DT13-4-07. E Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHELL BODY BLANK FOR 84MM HE & ILLG.[99]() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L) C Nonestab
2) BOMB AERIAL 100-120 KG HE, EMPTY[99]() Specification : AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB 100-120 "TO OFK DRG.NO.KhPK-410026(4 SHEETS). Painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC E Nonestab
3) SET OF BOMB BODY EMPTY ASSY FOR AERIAL BOMB 100-120 KG[99]() Specification : DRG.NO. 0303 00 01 01 02 000 00PB SPECN: NO. ARDE/SPECN/668 DT. DEC,2007 C Nonestab
Category : p
Grade : Grade II
Size :
584 SWASTIK TOOL ROOM SERVICES PVT. LTD.
14B BAJRANG BALI INDUSTRIAL ESTATE, RANIGANJ BHATTA AREA PANKI SITE-4 KANPUR UTTAR PRADESH
PIN1 : 208020
Phone No. : 0512-2232799, 9415051011, 9580431058, 9838111157
GSTIN : 09AAPCS2927L1ZO 		AAPCS2927L

Download 		1) Field Gun Factory Kanpur
Name Specification Use Status
1) INSERT FOR 155 MM (BOFORS)() AS PER DRG. & SPECIFICATION E Estab.
2) REBOUND SLIDE FOR REVOLVER() AS PER DRG. & SPECIFICATION E Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING PISTOL GRIP FOR JVPC Description : PIN LOCKING PISTOL GRIP FOR JVPC() Specification : PIN LOCKING PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-04-00-09-001-00DA C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC Description : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BLANK BODY COVER MAG 7.62 MM[70]() Specification : AS PER SPECIFICATION C Nonestab
2) BODY SAFTY CATCH MAG 7.62 MM[70]() Specification : AS PER SPECIFICATION C Nonestab
3) GAURD TRIGGER MAG 7.62 MM[70]() Specification : AS PER SPECIFICATION C Nonestab
Category : P
Grade : II
Size :
1) Small Arms Factory
Name Specification Use Status
1) Rod Front Spring Recoil for JVPC[70]() Specification : Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD C Nonestab
Category : P
Grade : II
Size :
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) COCKING HANDLE Drg. No AKC-08/8* Description : COCKING HANDLE Drg. No AKC-08/8*() Specification : AS PER DRG C Estab
2) FRAME TRIGER DS CAT NO.1005-006602 Description : FRAME TRIGER DS CAT NO.1005-006602() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645 Description : BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645() Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15 C Estab
2) Blank for Body Cover Drg. No. 23055A SKM-902*1 Description : Blank for Body Cover Drg. No. 23055A SKM-902*1() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Estab
3) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
4) Steel blank of Receiver plate Left and Right FOR MAG Description : Steel blank of Receiver plate Left and Right FOR MAG() Specification : AS PER DRG. C Estab
5) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
6) BLANK FOR BODY COVER FOR MAG 7 62MM Description : BLANK FOR BODY COVER FOR MAG 7 62MM() Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G C Estab
7) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
8) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
9) PIN LOCKING PIN FIRING FOR SMALL ARMS Description : PIN LOCKING PIN FIRING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) COCKING HANDLE Drg. No AKC-08/8* Description : COCKING HANDLE Drg. No AKC-08/8*() Specification : AS PER DRG C Estab
11) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
12) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
13) SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23 Description : SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23() Specification : SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 C Estab
14) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
15) BODY SAFETY CATCH Description : BODY SAFETY CATCH() Specification : AS PER DRG C Estab
16) PIVOT FEED LEVER FOR MAG Description : PIVOT FEED LEVER FOR MAG() Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02 C Estab
17) PIVOT FEED LEEVER(SAF.MATL.) MAG 7.62MM Description : PIVOT FEED LEEVER(SAF.MATL.) MAG 7.62MM() Specification : AS PER DRG. C Estab
18) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
19) PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG Description : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG() Specification : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL TO DS CAT NO. 5315-001514 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION. C Estab
20) PIN SEAR TRIPPER FOR MAG Description : PIN SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5315-001540 DC(I) NO. 27013-SA DT-14.01.17 IN FINISHED CONDITION. C Estab
21) Band Front Sight To DS CAT NO. 5340-016724 Description : Band Front Sight To DS CAT NO. 5340-016724() Specification : AS PER DRG. C Estab
22) GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION. Description : GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION.() Specification : GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION. C Estab
23) SECURING NUT BUFFER ASSEMBLY PART NO 1 135 FOR MAG Description : SECURING NUT BUFFER ASSEMBLY PART NO 1 135 FOR MAG() Specification : SECURING NUT, BUFFER ASSEMBLY PART NO. 1/135 TO DS CAT NO. 5305-004283 DC(I) NO. 25343-SA DT-26.4.02 (MATERIAL ALUMINIUM ALLOY RD 1-3/8" (34.925MM) DIA. SPECN. BS:1474-1987,2014A,T6HEAT TREATMENT MIN.110HB 10/500(130 HV)AGAINST LF NO.06 C Estab
24) FRAME TRIGGER for MAG Description : FRAME TRIGGER for MAG() Specification : FRAME TRIGGER DS CAT NO.1005 - 006602 DC(I)NO.25317-SA DT.03.04.2002 IN FINISHED CONDITION W/O ANODISING. C Estab
25) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. Description : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.() Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.) C Estab
26) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
27) BODY UPPER FEED MECH SLIDE DS CAT 1005-006823 Description : BODY UPPER FEED MECH SLIDE DS CAT 1005-006823() Specification : AS PER DRG R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645 Description : BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645() Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15 C Estab
2) Blank for Body Cover Drg. No. 23055A SKM-902*1 Description : Blank for Body Cover Drg. No. 23055A SKM-902*1() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Estab
3) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
4) Steel blank of Receiver plate Left and Right FOR MAG Description : Steel blank of Receiver plate Left and Right FOR MAG() Specification : AS PER DRG. C Estab
5) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
6) BLANK FOR BODY COVER FOR MAG 7 62MM Description : BLANK FOR BODY COVER FOR MAG 7 62MM() Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G C Estab
7) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
8) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
9) PIN LOCKING PIN FIRING FOR SMALL ARMS Description : PIN LOCKING PIN FIRING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) COCKING HANDLE Drg. No AKC-08/8* Description : COCKING HANDLE Drg. No AKC-08/8*() Specification : AS PER DRG C Estab
11) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
12) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
13) SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23 Description : SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23() Specification : SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 C Estab
14) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
15) BODY SAFETY CATCH Description : BODY SAFETY CATCH() Specification : AS PER DRG C Estab
16) PIVOT FEED LEVER FOR MAG Description : PIVOT FEED LEVER FOR MAG() Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02 C Estab
17) PIVOT FEED LEEVER(SAF.MATL.) MAG 7.62MM Description : PIVOT FEED LEEVER(SAF.MATL.) MAG 7.62MM() Specification : AS PER DRG. C Estab
18) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
19) PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG Description : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG() Specification : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL TO DS CAT NO. 5315-001514 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION. C Estab
20) PIN SEAR TRIPPER FOR MAG Description : PIN SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5315-001540 DC(I) NO. 27013-SA DT-14.01.17 IN FINISHED CONDITION. C Estab
21) Band Front Sight To DS CAT NO. 5340-016724 Description : Band Front Sight To DS CAT NO. 5340-016724() Specification : AS PER DRG. C Estab
22) GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION. Description : GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION.() Specification : GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION. C Estab
23) SECURING NUT BUFFER ASSEMBLY PART NO 1 135 FOR MAG Description : SECURING NUT BUFFER ASSEMBLY PART NO 1 135 FOR MAG() Specification : SECURING NUT, BUFFER ASSEMBLY PART NO. 1/135 TO DS CAT NO. 5305-004283 DC(I) NO. 25343-SA DT-26.4.02 (MATERIAL ALUMINIUM ALLOY RD 1-3/8" (34.925MM) DIA. SPECN. BS:1474-1987,2014A,T6HEAT TREATMENT MIN.110HB 10/500(130 HV)AGAINST LF NO.06 C Estab
24) FRAME TRIGGER for MAG Description : FRAME TRIGGER for MAG() Specification : FRAME TRIGGER DS CAT NO.1005 - 006602 DC(I)NO.25317-SA DT.03.04.2002 IN FINISHED CONDITION W/O ANODISING. C Estab
25) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. Description : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.() Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.) C Estab
26) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
27) BODY UPPER FEED MECH SLIDE DS CAT 1005-006823 Description : BODY UPPER FEED MECH SLIDE DS CAT 1005-006823() Specification : AS PER DRG R Estab
Category : p
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : PREMACHINING OF ARM 495 FIRING UNIT C Estab
2) BEARING LS-11 Description : BEARING LS-11() Specification : BEARING LS-11 C Estab
3) PIN Description : PIN() Specification : FINISH MACHINING OF LOOK PIN AS PER DRG. NO. 2A46M-02-93 C Estab
4) MACHINING Description : MACHINING() Specification : MACHINING OF STUD C Estab
5) NOZZLE AS PER DRG NO. 2A46-01-05. Description : NOZZLE AS PER DRG NO. 2A46-01-05.() Specification : NOZZLE AS PER DRG NO. 2A46-01-05. C Estab
6) Plate Body Description : Plate Body() Specification : As per FGK Drg. 32-0501 MK-III C Estab
7) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG. NO. 32-0122 MK-III C Estab
Category : s
Grade : 3
Size : S
585 NEMANI POLY PRODUCTS PVT. LTD.
SHED B, PLOT 24A, BAJRANG BALI AUDYOGIC ASTHAN, BHATTA AREA, PANKI KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-3291348, 8874204951, 9336110932
GSTIN : 09AAACN4829R1ZR 		KNPN01179D

Download 		1) Field Gun Factory Kanpur
Name Specification Use Status
1) PLASTIC MOULDING ITEMS UP TO WT. 500 GM.() AS PER DRG. & SPECIFICATION 1 Estab.
2) FABRICATION OF SMALL AND MEDIUM COMPONENTS() AS PER DRG. & SPECIFICATION 2 Estab.
Category : P
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) CAPS KNEE COMPLETE[21]() Specification : IND/TC/3263(c) NOTE : F.O.T . SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) PLASTIC STOPPER[21]() Specification : "SCH. NO. DMSRDE/LE-2/94(2) ATTACHED WITH SPECIFICATION NO.DMSRDE/T&GS/95/425(b) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BUTTON PLASTIC KHAKI 16MM[21]() Specification : IS:1461-1984 REAFFIRMED 1991 AND SUPPLEMENTARY SCHEDULE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BUTTON PLASTIC VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) RUBBER STUD ROUND BLACK[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) PLASTIC STOPPER (BLACK)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
4) BUCKLE PLASTIC 50 MM SQUARE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) FEMALE CAP (PUSH FIT) AS PER DRG.NO. SK-914 FOR A/F RG.NO. SK-914 FOR A/F[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) PLASTIC TOGGLE TYPE-I[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Toggle Cord Stopper[21]() Specification : Prov. Specification No. S/6421/Bag Sleeping Lt Wt/TC-6 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Plastic Buckle Black[21]() Specification : As per Requirements & Specifications R Estab
2) LDPE Sheet for Peak Interlining Size- Small, medium & Large[21]() Specification : As per Supp. Schedule No.Tex-1/1299/82/1 Appendix B to Prov. Specification No. S/2590/Cap FS Army Logo/TC-15(a) and dimensions as per Drawing Sheet with Prov. Specification No .S/2590 /Cap FS Army Logo/TC-15(a). R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Hanger PVC material having arrangement for hanging the Trouser.[21]() Specification : Hanger PVC material having arrangement for hanging the Trouser, sz. width-55mm, Length-85mm (- + 10) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Metal Hooks 6 mm x Metal Clip 12 mm[21]() Specification : Size 1 Fig. 1 of IS Specification no. IS:4066-1967 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Spring Type Cylindrical Plastic Stopper White[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR R Estab
2) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR] R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) PLASTIC STOPPER OG[21]() Specification : PLASTIC STOPPER OG SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94(2) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
2) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]() Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511 AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
3) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
4) PLASTIC RING FOR CORD PSN 19 0511[21]() Specification : PLASTIC RING FOR CORD PSN 19-0511 AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
5) PLASTIC ANTIQUE TIP PSN 19 0511 TPX[21]() Specification : PLASTIC ANTIQUE TIP PSN 19-0511 TPX AS PER DRAWING, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PAT & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) D RING OF ROD THICKNESS 8 MM[9911037675]() Specification : Stainless Steel AISI Grade 316 As per Drawing OPF/G.C./2019 D Ring R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TOWING RING 20MM ID[2110025023]() Specification : DRG.NO.ADRDE/1402-02-002. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE PLASTIC BLACK 38 MM[2110039015]() Specification : SPCNS: PLATE NO-6 OF DRG. ATTACHED WITH DMSRDE SPECN. NO. DMSRDE/T&GS/93/410(b) R Nonestab
2) BUCKLE PLASTIC QUICK RELEASE 40 MM BLACK[2110039016]() Specification : SPCNS. NO. DMSRDE/T&GS/93/406 R Nonestab
3) BUCKLE PLASTIC 48 MM BLACK[2110039017]() Specification : SPECIFICATION: PLATE NO. 6 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b) R Nonestab
4) BUCKLE STEEL 38 MM BLACK EPOXI PAINTED[2110039014]() Specification : PLATE NO. 8 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b) R Nonestab
5) BUCKLE STEEL 48 MM BLACK EPOXI PAINTED[2110039013]() Specification : SPCNS: PLATE-7 OF DRG. ATTACHED WITH SPECN. NO. DMSRDE/T&GS/93/410(b) R Nonestab
6) Grommet With Washer 23 MM Dia[2110080006]() Specification : SPECN-ADRDE/1.6.01-03-01-01 R Nonestab
7) Packing Bar cord Ring[2110090012]() Specification : ADRDE/1.6.01.04-30 (Prov.) R Nonestab
8) Spike[2110090007]() Specification : SPECN-ADRDE/1.6.01.04-29 (PROV.) R Nonestab
9) Hook for Rigging Lines Packing[2110090013]() Specification : ADRDE/1.6.01.04-31 (PROV.) & ADRDE/1.6.01.04-33 (PROV.) R Nonestab
10) LARGE PACKING ROD[2110090014]() Specification : ADRDE/1.6.01.04-32 (PROV.) R Nonestab
11) Clamp[2110029023]() Specification : ADRDE/1417. R Nonestab
12) Shoulder Adjustable Buckle ACPB CT[2110080015]() Specification : Specn No. ADRDE/194(a) R Nonestab
13) Pack Frame Main[2110025089]() Specification : Specn. No. 2.1.01-15-00. R Nonestab
14) Pack Frame Reserve[2110025096]() Specification : Specn. No. 2.1.01-19-00. R Nonestab
15) Metal Ring 50 MM Dia[2110029022]() Specification : Specn- 1.6.01.04-07-01 R Nonestab
16) Metal Ring 38 MM Dia[2110029021]() Specification : SPECN-ADRDE/1.6.01.04-09-01 R Nonestab
17) Metal Comp Pin[2110080013]() Specification : ADRDE/1.6.01.03.03-01 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Hanger PVC material having arrangement for hanging the Trouser[21]() Specification : Hanger PVC material having arrangement for hanging the Trouser, sz. width-55mm, Length-85mm (- + 10) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Polypropylene Strapping zero point five mm Thick and 12 mm wide in white colour[21]() Specification : Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through R Estab
2) Polypropylene Strapping Size 19 MM x 0.55 MM Thick (Trader) [21]() Specification : Polypropylene Strapping Size 19 MM x 0.55 MM Thick Specification No. JSS: 8135-10:2004 except width which should be 19 mm Strap should be printed O.C.F. Shahjahanpur. Note-“The Logo of OCFS should be printed on Plasted Strapping at a R Estab
3) LDPE Sheet for Peak Interlining Size Small medium and Large[21]() Specification : As per Supp. Schedule No.Tex-1/1299/82/1 Appendix B to Prov. Specification No. S/2590/Cap FS Army Logo/TC-15(a) and dimensions as per Drawing Sheet with Prov. Specification No .S/2590 /Cap FS Army Logo/TC-15(a). R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) LDPE Sheet for Cap Balaclava OG Peak Interlining[21]() Specification : LDPE SHEET FOR CAP BALACLAVA OG PEAK INTERLINING FOR ALL SIZES SPECN. NO.1 APPENDIX "B " TO JSS.8405 ;25: 2010 REV NO.1 AMD NO.1&2. AND DRAWING AS PER APPENDIX "B" & "D" RESPECTIVELY PROV. SPECN NO. S/5094/TC/-1 (b)/Cap Bal OG(Imp) AS R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Spring Type Cylindrical Plastic Stopper White[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR R Estab
2) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR] R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) SNAP FASTENER FOUR PIECES SPRING TYPE 7 BY 7 WITH PLASTIC WASHER[21]() Specification : SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 12 R Estab
2) Button Polyester 19 mm OG[21]() Specification : IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b) Except that: (i) Material shall be polyester. (ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002). (iii) In app. R Estab
3) RUBBER STUD ROUND BLACK[21]() Specification : NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION R Estab
4) PLASTIC RING WITH HOLE BLACK FOR CORD[21]() Specification : PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS. R Estab
5) PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY[21]() Specification : PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS. R Estab
6) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]() Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511 AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
7) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
8) PLASTIC RING FOR CORD PSN 19 0511[21]() Specification : PLASTIC RING FOR CORD PSN 19-0511 AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
9) PLASTIC ANTIQUE TIP PSN 19 0511 TPX[21]() Specification : PLASTIC ANTIQUE TIP PSN 19-0511 TPX AS PER DRAWING, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PAT & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY R Estab
10) LOW DENSITY POLYTHENE FILM 0 POINT 05 MM THICK 91 POINT 5 CM WIDE IN ROLL OF MIN 100 METER[21]() Specification : LOW DENSITY POLYTHENE FILM 0.05 MM THICK 91.5 CM WIDE IN ROLL OF MIN 100 METER SPECIFICATION :- IS:2508:1984 (2ND REVISION REAFFIRMED 2008 AMD 3) R Estab
Category :
Grade : Grade III
Size : S
586 RASYANTRIK UDYOG
6/1, CO-OPERATIVE INDUSTRIAL ESTATE, MUL ROAD, mul road CHANDRAPUR Maharashtra
PIN1 : 442401
Phone No. : 8412011664
GSTIN : 27ACHPM5667J1Z2 		ACHPM5667J

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
2) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE[63]() Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999. S Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030151 MILD STEEL PLATE AS PER SPECN NO BS970 GREN3[01]() Specification : MILD STEEL PLATE SIZE 1830X 1830 X 25 MM THICK AS PER SPECN. NO. BS970 GREN3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6333501102 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236 R Nonestab
2) 6333501101 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235 R Nonestab
Category :
Grade : Grade III
Size : S
587 OPTIMIZED SOLUTIONS LIMITED
B-505, The FIRST B/H KESHAVBAUG PARTY PLOT, VASTRAPUR Ahmedabad Gujarat
PIN1 : 380015
Phone No. : 29707308
GSTIN : 24AAACO7440D1ZU 		AHMO00665A

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) 7440200813 AMPLIFIER[74]() Specification : 7440200813 AMPLIFIER Drg No.IUMK.468724.001 AMLIFIER TO DRG.NO.IUMK.468724 .001 FOR POWER UNIT OF 1G46 C Nonestab
2) 7440200814 COMPENSATING NETWORK[74]() Specification : 7440200814 COMPENSATING NETWORK Drg No.AL5072002 COMPENSATING NETWORK TO DRG.NO .AL5072002 FOR POWER UNIT OF 1G46. C Nonestab
3) 7440200815 ELECTRONIC ADJUSTMENT UNIT[74]() Specification : 7440200815 ELECTRONIC ADJUSTMENT UNIT Drg No.AL5103052 ELECTRONIC ADJUSTMENT UNIT TO DRG.NO.AL5.103.052 FOR POWER UNIT OF 1G46. C Nonestab
4) 7440200817 CONVERTER[74]() Specification : 7440200817 CONVERTER Drg No.AL5121082 CONVERTER TO DRG.NO.AL5121082 ,FOR POWER UNIT OF 1G46 C Nonestab
5) 7440200819 REGULATING UNIT[74]() Specification : 7440200819 REGULATING UNIT Drg No.AL5.122.014 REGULATING UNIT TO DRG.NO.AL5. 122.014,FOR POWER UNIT OF 1G46 C Nonestab
6) 7440200820 STABILIZER[74]() Specification : 7440200820 STABILIZER Drg No.AL5.123.051 STABILIZER TO DRG.NO.AL5.123. 051,FOR POWER UNIT OF1G46 C Nonestab
7) 7440200821 PULSE COUNTER[74]() Specification : 7440200821 PULSE COUNTER Drg No.IUMK 468.153.001 PULSE COUNTER TO DRG.NO IUMK 468.153.001 FOR POWER UNIT OF 1G46 C Nonestab
8) 7440200838 PLATE ASSY[74]() Specification : 7440200838 PLATE ASSY Drg No.AL6.731.111 PLATE ASSY TO DRG.NO.AL6.731. 111,FOR POWER UNIT OF 1G46 C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) VIDEO PROCESSING ELECTRONICS 7441121508[74]() Specification : VIDEO PROCESSING ELECTRONICS Drg No.CDR.TI(MK-II)T-72/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-72 (BEL PART NO. 170000402008) (D ELICERABLES AS PER ATTECHED OL F SHEET NO. CDR. T C Nonestab
2) STRAIGHT FLEX PCB WITH LENGTH 7441121509[74]() Specification : STRAIGHT FLEX PCB WITH LENGTH Drg No.CDR.TI(MK-II)T-72/EL/FLEX PCB/ STRAIGHT FLEX PCB WITH LENGTH 115MM FOR CDR. TI SIGHT OF TAN K T-72 (BEL PART NO. 170000397 449) (DELIVERABLE AS PER ATTECHED OLF SHEET NO. CDR. TI (MK- C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) 7441121509 STRAIGHT FLEX PCB WITH LENGTH[74]() Specification : 7441121509 STRAIGHT FLEX PCB WITH LENGTH Drg No.CDR.TI(MK-II)T-72/EL/FLEX PCB/ STRAIGHT FLEX PCB WITH LENGTH 115MM FOR CDR. TI SIGHT OF TAN C Nonestab
2) 9001121271 VIDEO PROCESSING BOARD[90]() Specification : 9001121271 VIDEO PROCESSING BOARD Drg No.096701070400000 VIDEO PROCESSING BOARD DRG. NO . 096701070400000 ALONGWITH CONNECTORS AND MA C Nonestab
3) 9001121272 POWER SUPPLY CUM CONTROL BOARD[90]() Specification : 9001121272 POWER SUPPLY CUM CONTROL BOARD Drg No.096701070300000 POWER SUPPLY CUM CONTROL BOARD DRG. NO. 096701070300000 ALONGWITH CONNE C Nonestab
4) GYRO STABILIZER AL2564007 LF 7440200935[74]() Specification : GYRO STABILIZER, AL2.564.007 (LF-7440200935) E Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) VIDEO PROCESSING BOARD (LF 9001121271)[90]() Specification : VIDEO PROCESSING BOARD DRG NO. 096701070400000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG/SPECN. AS APPENDIX-1 OF 0 TO 18 PAGES ( TOTAL 19 SHEETS) C Nonestab
2) POWER SUPPLY CUM CONTROL BOARD (L.F.9001121272)[90]() Specification : POWER SUPPLY CUM CONTROL BOARD DRG.NO. 096701070300000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG./SPECN. AS PER APPENDIX-II OF 5 PAGES. C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) 7441123477 50 PIN CABLES OF MIRROR UNIT[74]() Specification : 7441123477 50 PIN CABLES OF MIRROR UNIT A S PER DRG. NO. OLF/MISC/1123 C Nonestab
2) 7441123489 AUTOMAT CORD BL2360001 01[74]() Specification : 7441123489 AUTOMAT CORD BL2360001-01 C Nonestab
Category :
Grade : Grade III
Size : S
588 IST LIMITED
DELHI-JAIPUR HIGHWAY NO. 8 KAPRIWAS-DHARUHERA, DISTT. REWARI, HARYANA
PIN1 : 123110
Phone No. : 01274-267346, 267347, 267348 FAX: 01274-267444
GSTIN : 06AAACI0146A1ZF 		RTKI00525A

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)() DRG PT NO. IQX-69 GE DC NO. 36650-A DT. 26/2/00 SPECN:- F-1301-910540-K (CQA-0910) DC 36613-A DT. 11/11/99 C Estab
2) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921)() VALVE TO DRG NO. 5209 565/DRG.NO.TRD-2-2-2247 C Nonestab
3) ELECTRIC SYSTEM F-1321-309852-A (9911356360)() DRG NO F-1321-309852-A DC NO. 34507-A DT. 20/12/88 SPECN F-1301-909840-C (CIA-0904) DC NO.34692-A DT. 5/04/88 C Nonestab
4) PIEZO ELECTRIC GENERATOR ASSY (9911357853)() DRG .NO. TRD 2-2-2203 C Nonestab
5) AFT CLOSURE WITH PLUNGER (9911357886)() DRG NO. TRD 1-2-2252 C Nonestab
6) SPACER TO DRG.NO.TRD-2-2-2273 (9911357855)() SPACER TO DRG.NO.TRD-2-2-2273 C Nonestab
7) SET OF 3COMP. FOR BOOSTER OF HEAT-551 (9911357953)() 1) BOOSTER CUP TO DRG NO.TRD-2-2-2277. 2) PIN TO DRG NO.TRD-1-2-2278. 3) PARTITION TO DRG NO.TRD-1-2-2279 C Nonestab
8) ARMING DEVICE (21 ITEM) TRD 2-2-2181 (9911357877)() ARMING DEVICE ( FUZE COMPONENTS CONSIST OF 21 ITEMS ) TO TRD NO 2-2-2181 & TRD NO. 2-2-2180 C Nonestab
9) SET 2 COMP. SHELL BODY & SUPPORT RING (9911357754)() SET OF 2 COMPONENTS ( FOR PROOF PURPOSE ):- a) SHELL BODY INERT, ARTCLE NO.1182404 OF 84MM TP 552. b) SUPPORT RING, ARTICLE NO. 5209308 OF 84MM TP 552 C Nonestab
10) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)() SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO. TRD-2-2-2277 & PIN TO DRG NO. TRD-1-2-2278 ) C Nonestab
11) ASSY OF S&A (EMPTY) COMPONENTS PFFC (9911357765)() AS PER SPECIFIED DRG. & SPECN. C Nonestab
Category : P
Grade : I
Size : M
589 CROWN INDUSTRIES
136 A Balaram Dey Street BALARAM DEY STREET KOLKATA West Bengal
PIN1 : 700006
Phone No. : 22414635
GSTIN : 19AAIFC8574B1ZA 		AAIFC8574B

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) ROPE HEMP H/L 12MM DIA[21]() Specification : IS:5176 GR.1 R Estab
2) ROPE POLYPROPYLENE MULTIFILAMENT 3 STRANDS H/L 6MM DIA UNDYED.[21]() Specification : PROV. SPECIFICATION NO. S/6014/TC-5 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) ROPE SISAL VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) LINE HEMP OR ROPE HEMP VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) ROPE POLYPROPELENE VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) ROPE POLYPROPLENE 3 STRAND H/L O.G. 6 MM DIA[21]() Specification : IND/TC/2324 (b) EXCEPT THAT R Estab
2) ROPE POLYPROPLINE H/L 3 STRAND O.G. 8MM DIA[21]() Specification : SPECN IND/TC/2324(b) EXCEPT THAT R Estab
Category :
Grade : Grade III
Size : S
590 RASH ENGINEERING
PLOT NO. 17, GUT NO. 43, BEHIND SEMENS LTD., M.I.D.C. WALUJ, AURANGABAD MAHARASHTRA
PIN1 : 131136
Phone No. : 9881786450 		AAPPI6752C

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) BRACKET TOP FOR BOX SM-51() AS PER DRAWING/SPECIFICATION. R ESTAB.
2) BRACKET TOP FOR BOX SM-51() AS PER DRAWING/SPECIFICATION. R ESTAB.
Category : DP
Grade : III
Size : S
591 Mahindra Defence Naval Systems Limited
Mahindra Towers, P.K.Kurne, Dr. G.M.Bhisale Marg Worli Mumbai Maharashtra
PIN1 : 400018
Phone No. : 670712
GSTIN : 27AAHCM9573A1ZB 		AACHM9573A

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086[99]() Specification : SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PC & CONSISTING OF 29 COMPONENTS AND TO ARDESPECIFICATION NO.ARDE/SPECN/668 DATE DEC'2007 REV.3 DATE NOV.2015 FOR PRE-FRAG 100-120KG C Estab
Category : p
Grade : Grade III
Size : M
592 Prem Textiles (International) Pvt Ltd.,
46A/27B, Sector-C, Industrial Area, Sanwer Road, Indore Madhya Pradesh
PIN1 : 452015
Phone No. : 0731-2722007 / 09893121334
GSTIN : 23AAECP1725C1Z1 		BPLP02994F

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth PC Disruptive (250 GSM) with Army Logo() PROV/OCFAV/FABRIC/001(a) R Not Estab.
2) Fabric PC Blended White for SDP-93cm() IS:2970(Type2) Blend composition P:C-67:33 as per IS:3416 R Not Estab.
3) Cloth Drill Cotton Dark Grey 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
4) Cloth Mercerised Cotton Light OG 142 CM (Minimum) Excluding Selvedges() PROV/OCFAV/Fabric/004 R Not Estab.
5) Fabric Twill Weave PC Disruptive 150 cm AL() PROV/S/2599/TC-11/2009/01 R Not Estab.
6) Cloth Twill Weave PC Disrup. 250 GSM Greenish Khaki 150 cm() PROV/S/2599/TC-11/2009/02 R Not Estab.
7) Cloth Calico Cotton White 91 cm() IS: 1544-1973 R Not Estab.
8) Cloth Mockleno Weave Polyester & Cotton Black 150 cm() Prov/OCFAV/Fabric/005 R Not Estab.
9) Cloth PC Disruptive (220 GSM) with Indian Army Logo() As per Specification & Requirement R Not Estab.
10) Cloth Polyester & Cotton (20:80) Greenish Khaki (250GSM) 152cm (minimum) excluding selvedges for Navy() PROV/OCFAV/FABRIC/001(a) without Disruptive Pattern R Not Estab.
11) Cloth Drill Cotton Greenish Khaki 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
12) Cloth Cotton Poplin Light Blue 150 cm() IS: 188-2004 (V.No.2) R Not Estab.
13) Cloth Drill Cotton White Bleached 142cm() VARIETY NO. 3 OF IS 177:1989 ( FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
14) Cloth Cotton Light Blue 142cm() SPECIFICATION: TYPE 2 OF IS:2970-87,REAFFFIRMED 2004 (FIRST REVISION) EXCEPT FOR AIR POROSITY. R Not Estab.
15) Cloth PW PC Deep Brown 150 CM() AIR HQ/DQAS/MG - 082 (REVISED 2004 ) R Not Estab.
16) Cloth Drill Cotton White Bleached 91 Cm() IS: 177-1989 AND (IV TH REV.)RE-AFFIR.1997,V.NO.3 R Not Estab.
Category : DDP
Grade : II
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH DUCK COTTON 475 GMS O.G. W.P 91 CM VAT DYED[21]() Specification : IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2 R Nonestab
2) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 VARIETY NO. "A" R Nonestab
3) CLOTH COTTON CLOSELY WOVEN 170 GMS. DUAL SHADE (OG/WHITE) WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 (FIRST REVISION) R Nonestab
4) Cloth Cotton Closely Woven 235 gms. Dual Shade (OG/ White) WR 91 cms.[21]() Specification : JSS:8305-5-2000 (REV.NO. 1) VARIETY "B" R Nonestab
5) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS[21]() Specification : IS:1422-1983 V.NO. 2 EXCEPT THAT R Nonestab
6) CLOTH COTTON DOSUTIE WHITE BLEACHED 91 CMS.[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Nonestab
7) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21]() Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Nonestab
8) CLOTH DRILL COTTON WHITE BLEACHED 71 CMS(V.NO.3)[21]() Specification : IS : 177-1989 V.NO.3. R Nonestab
9) CLOTH DRILL COTTON O.G. 142 CMS.[21]() Specification : IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Nonestab
10) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS[21]() Specification : PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Nonestab
11) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.[21]() Specification : PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Nonestab
12) FLANNELETTE LINING BROWN 142 + -1CM WIDE WITH FIRM SELVAGE[21]() Specification : IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO R Nonestab
13) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. O.G.91 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
14) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) Cloth Cotton Closely Woven 235 gms. Dual Shade (OG/ White) WR 91 cms.[21]() Specification : JSS:8305-5-2000 (REV.NO. 1) VARIETY "B" R Nonestab
2) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 VARIETY NO. "A" R Nonestab
3) CLOTH COTTON CLOSELY WOVEN 170 GMS. DUAL SHADE (OG/WHITE) WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 (FIRST REVISION) R Nonestab
4) CLOTH DRILL COTTON O.G. 142 CMS.[21]() Specification : IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Nonestab
5) CLOTH COTTON DOSUTIE WHITE BLEACHED 91 CMS.[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Nonestab
6) CLOTH DUCK COTTON 475 GMS O.G. W.P 91 CM VAT DYED[21]() Specification : IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2 R Nonestab
7) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS[21]() Specification : IS:1422-1983 V.NO. 2 EXCEPT THAT R Nonestab
8) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21]() Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Nonestab
9) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.[21]() Specification : PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Nonestab
10) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. O.G.91 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
11) FLANNELETTE LINING BROWN 142 + -1CM WIDE WITH FIRM SELVAGE[21]() Specification : IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO R Nonestab
12) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS[21]() Specification : PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Nonestab
13) CLOTH DRILL COTTON WHITE BLEACHED 71 CMS(V.NO.3)[21]() Specification : IS : 177-1989 V.NO.3. R Nonestab
14) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
15) CLOTH CALICO COTTON KHAKI 91 CM.[21]() Specification : IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R Nonestab
16) CLOTH CALICO COTTON WHITE BLEACHED 91 CM.[21]() Specification : IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Nonestab
17) CLOTH CANVAS COTTON 545 GMS. O.G. W.P. 91 CMS. WIDE[21]() Specification : IS: 1424-1983 (V.NO.3) AND WATER PROOFNESS TO IS: 6803-1972 R Nonestab
18) CLOTH CANVAS COTTON 680 GMS. O.G. WP 91 CMS.[21]() Specification : IS: 1424-1983 (V.NO.2) REAFMD. 1995 & WATERPROOFNESS TO IS: 6803 R Nonestab
19) CLOTH DUCK COTTON 340 GMS SCOURED 91 CMS[21]() Specification : IS:1422-1983 (V.NO. 4) REAFF. 2000 WITH AMDT.NO.1 OF APR.,87 R Nonestab
20) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.[21]() Specification : IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT R Nonestab
21) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.[21]() Specification : SPECN.NO. IS:13510-2000, V.NO.1 (TABLE-1 OF CLAUSE 5.1) R Nonestab
22) LONG CLOTH COTTON WHITE BLEACHED 91 CMS[21]() Specification : IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 R Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) CANVAS CLOTH COTTON 410 (g) KHAKHI 91 CM TO SPECN IS: 1424-1983 (NO. 4)[70]() Specification : CANVAS CLOTH COTTON 410 (g) KHAKHI 91 CM TO SPECN IS: 1424-1983 (NO. 4) R Nonestab
Category : dp
Grade : Grade II
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) , ITEM CODE- 2101138895 , cloth duck[70]() Specification : cloth duck, RIP STOP, 610G, OLIVE GREEN,WATER PROOF, 91 CM WIDE,IND/TC/0145 ITEM CODE- 2101138895 R Nonestab
Category : dp
Grade : Grade II
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC COTTON GREY MERCERISED WIDTH 94 CM[2101221967]() Specification : AS PER PARTICULAR =WIDTH=94 CM A.P.35+_5 Cuft/Sqft/Sec at 10"WHP Weight/Sq.Metre=115-117 Gram Thread /cm-Warp-28,WEft-25 Tex of Yarn Tex x Fold-Warp-9.4x2,Weft-9.5 R Nonestab
Category : p
Grade : Grade III
Size : M
1) Cordite Factory Arvankadu
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED[21]() Specification : IS 5088-1982 (REV.1) R Nonestab
2) CC AZURE BLUE[21]() Specification : CAMBRIC COTTON DYED AZURE BLUE 44" WIDE ISC NO:104 OF IS:5/2007 FOR AZURE BLUE (SIXTH REVISION) TO SPECN: IS: 5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY NO;2) R Nonestab
3) CC OLIVE GREEN[21]() Specification : CAMBRIC COTTON DYED OLIVE GREEN 915 MM WIDE (36") IS COLOUR CODE 220 OF IS:5-2007 (SIXTH REVISION) FOR OLIVE GREEN SPECIFICATION IS:5088 OF1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VAR R Nonestab
4) CC ORANGE[21]() Specification : CAMBRIC COTTON DYED LIGHT ORANGE 915 MM WIDE (ISC No.557 OF IS:5/2007) (SIXTH REVISION) SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 R Nonestab
5) CC SIGNAL RED 44[21]() Specification : CAMBRIC COTTON DYED SIGNAL RED 1117.6 MM (44") ISC COLOUR CODE 537 OF IS:5-2007 (SIXTH REVISION FOR SIGNAL RED SPECN : IS:5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VARIETY NO.2) R Nonestab
6) CC RED 36[21]() Specification : CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") (SIXTH REVISION) CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") ISC COLOUR CODE 537 OF IS: 5-2007 (SIXTH REVISION) FOR R Nonestab
Category : ddp
Grade : Grade I
Size : M
593 Rolex Lanolin Products Ltd
plot no. 6309, phase IV, G.I.D.C Vapi Gujarat
PIN1 : 396195
Phone No. : 02602452233 		AAACR3499P

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) NIC LANOLINE ANHYDROUS LF NO 1034502000 Description : NIC LANOLINE ANHYDROUS LF NO 1034502000() Specification : NIC LANOLINE ANHYDROUS TO SPECN:- IND/SL/2804 (a) R Estab
Category : p
Grade : 3
Size : S
594 VIJAYA INDUSTRIES
7-8-301/1,GOUTHAMNAGAR, FEROZGUDA HYDERABAD Telangana
PIN1 : 500011
Phone No. : 6666174617
GSTIN : 36AGHPG9544J1Z1 		AGHPG9544J

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) SLIDE TO DRG NO CTM 166[70]() Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]() Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) SLIDE FOR YASHASVI AS PER DRG NO CTM 198 WITHOUT PLATING COATING Description : SLIDE FOR YASHASVI AS PER DRG NO CTM 198 WITHOUT PLATING COATING() Specification : SLIDE FOR YASHASVI AS PER DRG. NO. CTM-198 (WITHOUT PLATING/COATING) R Estab
Category : p
Grade : 3
Size : S
595 SHAH METAL INDUSTRIES
Plot No. 107, Near ALIMCO, Industrial Area Richhai, Jabalpur, Madhya Pradesh
PIN1 : 482010
Phone No. : 0761-2757006
GSTIN : 23ABPSF1015H1ZE 		JBPS07116E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Load body Complete/Load Body Accessories BS III B6510604-C-1() As per specification/drawings C Not established
2) Bumper-Cross Member 1st B 8136507B() As per specification/drawings C Not established
3) Cab Mtg Bkt RH X 0444410 E RH() As per specification/drawings C Not establishedNot established
4) Cab Mtg Bkt LH X 0444510 E LH() As per specification/drawings C Not established
5) Cross Member AGB Rear B 8136503 C() As per specification/drawings C Not established
6) Bottom X Member 4632614 C() As per specification/drawings C Not established
7) Fuel Tank Bkt X7184610() As per specification/drawings C Not established
8) Rear Tow Hook Cross Member 7th B8136508() As per specification/drawings C Not established
9) Assy of Spare Wheel Carrier B0909101HASE4() As per specification/drawings C Not established
10) Body bkt 4th X7135410() As per specification/drawings C Not established
11) Bkt X7184210 B-1() As per specification/drawings C Not established
12) End Bkt X7184510 B() As per specification/drawings C Not established
13) End Bkt LH X0476210() As per specification/drawings C Not established
14) Bkt Body Mtg Frt X7125410() As per specification/drawings C Not established
15) Bkt Cab Mtg Rear RH B 0122907() As per specification/drawings C Not established
16) Bkt Cab Mtg Rear LH B 0122906() As per specification/drawings C Not established
17) Cross Member - AGB FRT B8136502 C() As per specification/drawings C Not established
18) Bracket on Frame (102-04) F0402714() As per specification/drawings C Not established
19) Tail Pipe Support X7144514 HASE() As per specification/drawings C Not established
20) Bkt Silencer Mtg F3B 00714 HASE() As per specification/drawings C Not established
21) Shock ABS Mtg. Bkt. LH F8425114 HASE() As per specification/drawings C Not established
22) Radiator Mounting Bkt X7184314() As per specification/drawings C Not established
23) Bracket Air Reservoir B3910101HA() As per specification/drawings C Not established
24) Bracket – AGB (102-04) X0472614V1() As per specification/drawings C Not established
25) Shock ABS Mtg Bkt RH F8966214() As per specification/drawings C Not established
26) Rear Shock Abs Bkt – LH X7198810() As per specification/drawings C Not established
27) Rear Shock Abs Bkt - RH X7198910() As per specification/drawings C Not established
28) S/A Shk Abs Bkt B6000301() As per specification/drawings C Not established
29) Load Body LPTA 257470912701() As per specification/drawings C Not established
30) Oil Can Carrier BPD1111-84() As per specification/drawings C Not established
31) Jerry Can Carier 2614700000138V3() As per specification/drawings C Not established
32) Assy Tie member 21580100104() As per specification/drawings C Not established
33) Fifth Cross Member 263631208221() As per specification/drawings C Not established
34) Sixth Cross Member 261431207143() As per specification/drawings C Not established
35) Assy Tail Lamp Bkt 205054408209() As per specification/drawings C Not established
36) Assy Bumper Front 21548850 010() As per specification/drawings C Not established
37) Assy Mtg Spare Wheel Carrier 61440300004() As per specification/drawings C Not established
38) Assy. Cross Member (W/o Mtg Bkt) 215431200116V1() As per specification/drawings C Not established
39) Assy S/A Cross Member 257432650106() As per specification/drawings C Not established
40) Assy Tool Box with 2 Support 261470000135() As per specification/drawings C Not established
Category : P
Grade : III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) End BKT LH X0476210[90]() Specification : As per Specification/Drg. C Nonestab
2) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]() Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11 C Nonestab
Category : P
Grade : III
Size :
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) End BKT LH X0476210[90]() Specification : As per Specification/Drg. C Nonestab
2) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]() Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11 C Nonestab
3) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]() Specification : DRG. 2725-57-31 C Nonestab
4) MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31[90]() Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31 C Nonestab
5) MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32[90]() Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32 C Nonestab
Category : P
Grade : III
Size :
596 Tekneek Spinners (P) Ltd.
84th K.M. stone,G.T.Road,Sewah Panipat Haryana
PIN1 : 132103
Phone No. : 0180-6452677
GSTIN : 06AAECT7782P1ZH 		RTKT01459D

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Yarn Wool Polyamide (80:20) 240 Tex OG() OCFS/YARN WOOL POLYAMIDE(80:20) 240 TEX OG/2016.AS PER RELEVANT CLAUSE OF THE SPECIFICATION. R Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Yarn Wool Polyamide (80:20) 240 Tex Air Force Blue[21]() OCFS/YARN WOOL POLYAMIDE (80:20) 240 TEX/BLANKET AF BLUE Except that Lot size as per Appendix C as per relevant Clause of the specification R Nonestab
Category : p
Grade : Grade II
Size : S
597 M.K INDUSTRIES
211/6 BABU PURWA COLONY KANPUR UTTAR PRADESH
PIN1 : 208023
Phone No. : 0512-2600532,9839032258
GSTIN : 09AFCPS3322J1ZD 		KNPV01804F

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) WIPER FOR PROJECT DHANUSH() AS PER DRG. NO. 6332057 C NOT ESTAB.
Category : P
Grade : III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.[42]() Specification : AS PER DRAWING NO 32P 5003. REQD FOR UBGL E Nonestab
2) DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL[42]() Specification : AS PER DRG NO 32P 5002. REQD FOR UBGL E Nonestab
3) SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL[70]() Specification : AS PER DRAWING C Nonestab
4) MFG & SUPPLY OF LEAF SPRING COCKING ARM TO DRG.NO.32P 4102 WITH FIRM'S MATERIAL FOR UBGL[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Slush Brush[70]() Specification : as per Drg. No.: K-9009 with Firm’s Material E Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BACK PACK WEAPON[70]() Specification : AS PER THE DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SPTA BAG[70]() Specification : AS PER THE DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RAM ROD Assy. for 38mm MSL[70]() Specification : 33P 6008 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES WITH CAP AS PER DRG NO. K 9021WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 9021WITH FIRMS MATERIAL E Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SLING[70]() Specification : AS PER THE DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CLEANING ROD EXTENSION AS PER DRG No. K 9002 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9002 WITH FIRM'S MATERIAL E Nonestab
2) SCREW DRIVER AS PER DRG NO K 9006 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 9006 WITH FIRMS MATERIAL E Nonestab
3) JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9023 WITH FIRMS MATERIAL E Nonestab
4) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL E Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]() Specification : AS PER DRAWING E Nonestab
2) BRUSH CLEANING BARREL TO DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL[70]() Specification : AS PER DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL E Nonestab
3) OIL BOTTLE TO DRG NO 32P 5005 (CES). REQD FOR UBGL[70]() Specification : AS PER DRG NO 32P 5005 E Nonestab
4) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL E Nonestab
5) CLEANING ROD EXTENSION AS PER DRG No. K 9002 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9002 WITH FIRM'S MATERIAL E Nonestab
6) BRUSH AS PER DRG No K 9003 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9003 WITH FIRMS MATERIAL E Nonestab
7) SLING ASSY AS PER DRG.NO. K 9007 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG.NO. K 9007 WITH FIRMS MATERIAL E Nonestab
8) OIL BOTTLE AS PER DRG No K 9008 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9008 WITH FIRMS MATERIAL E Nonestab
9) SLUSH BRUSH AS PER DRG No K 9009 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No K 9009 WITH FIRM'S MATERIAL E Nonestab
10) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL E Nonestab
11) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL E Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) SWAB TO DRG NO CI WPN 555 PART No 2A26 ASSY 41 3 Description : SWAB TO DRG NO CI WPN 555 PART No 2A26 ASSY 41 3() Specification : SWAB TO DRG NO CI WPN 555 PART No 2A26 ASSY 41 3 C Estab
2) BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4 Description : BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4() Specification : BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4 C Estab
3) PLUNGER DETENT DS CAT 5340-014712 Description : PLUNGER DETENT DS CAT 5340-014712() Specification : PLUNGER DETENT DS CAT 5340-014712 C Estab
4) All types of brushes, Swabs, Head Woolens, Staff/cleaning rods, Rammers pull through rod, drift slin Description : All types of brushes, Swabs, Head Woolens, Staff/cleaning rods, Rammers pull through rod, drift slin() Specification : As per Drawing /Specification of Customers. . C Estab
5) Sliding Knob without plating ,Slide Knob Description : Sliding Knob without plating ,Slide Knob() Specification : AS PER GCF /DRG/SPECN/IS/BS C Estab
6) Canvas items viz; cover Guns, cover muzzles, Cover breech cover carriage Description : Canvas items viz; cover Guns, cover muzzles, Cover breech cover carriage() Specification : As per Drawing /Specification of Customers. . C Estab
7) HASP Description : HASP() Specification : DRG NO. ICM-1918 C Estab
8) SPRING CHAIN Description : SPRING CHAIN() Specification : SPRING CHAIN DS CAT NO.- 1015-000107 C Estab
Category : p
Grade : 3
Size : O
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56 Description : RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56() Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 C Estab
2) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : SPRING HELICAL COMPRESSION PLUNGER TO DRG.ARDE SK-2689/86 IN FINISHED CONDITION. DS CAT NO. 5360-007212 DC(I) NO. 26548-SA DT- 25.11.10 C Estab
3) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
4) GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION Description : GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION() Specification : GUIDE SPRING RECOIL FRONT ARDE/SK- 2689/110. DS CAT NO-1005-007774.DC(1)26920-SA DT-26.08.16. (IN FINISHED CONDITION). C Estab
5) HOOK TO DS CAT NO 5340 015108 Description : HOOK TO DS CAT NO 5340 015108() Specification : HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16 C Estab
6) TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 Description : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10() Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 C Estab
7) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
8) SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Description : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006() Specification : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 C Estab
9) SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM Description : SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM() Specification : SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16. C Estab
10) PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 Description : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99() Specification : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 C Estab
11) SPRING CONTROL FEED ARM FOR MAG Description : SPRING CONTROL FEED ARM FOR MAG() Specification : DS CAT NO.5360-007527 DC(I) NO.27021-SA DT.28.1.17 IN FINISHED CONDITION C Estab
12) SPRING CATCH REAR SIGHT CURSOR FOR MAG Description : SPRING CATCH REAR SIGHT CURSOR FOR MAG() Specification : DS CAT NO. 5360-000512 DC(I) NO. 26097-SA DT- 24.9.05 IN FINISHED CONDITION. C Estab
13) 18. FRONT AND REAR FEED PAWL SPRING Description : 18. FRONT AND REAR FEED PAWL SPRING() Specification : DS CAT NO. 5360-000515 C Estab
14) SPRING EJECTION OPENING COVER FOR MAG Description : SPRING EJECTION OPENING COVER FOR MAG() Specification : DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 IN FINISHED CONDITION. C Estab
15) SPRING CATCH COVER IN FINISHED CONDITION FOR MAG Description : SPRING CATCH COVER IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360 - 003081 DC(I)NO.27018-SA, DT. 27.01.17 C Estab
16) SPRING SEAR TRIPPER FOR MAG Description : SPRING SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5360-000531 DC (I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
17) SPRING CARRYING HANDLE CATCH Description : SPRING CARRYING HANDLE CATCH() Specification : DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
18) EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. Description : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION.() Specification : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. C Estab
19) SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG Description : SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG() Specification : DS CAT NO. 5360-002926 DC(I) NO. 25393-SA DT-11.6.2002 IN FINISHED CONDITION. C Estab
20) SEAR SPRING FOR MAG Description : SEAR SPRING FOR MAG() Specification : DS CAT NO. 5360-003082 DC(I) NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
21) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 Description : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Estab
22) BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. Description : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.() Specification : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. C Estab
23) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. Description : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Estab
24) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. C Estab
25) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
26) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
27) OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 Description : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10() Specification : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 C Estab
28) BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. Description : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Estab
29) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
30) CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. Description : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.() Specification : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56 Description : RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56() Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 C Estab
2) SPRING HELICAL COMPRESSION PLUNGER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION PLUNGER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION PLUNGER TO DRG.ARDE SK-2689/86 IN FINISHED CONDITION. DS CAT NO. 5360-007212 DC(I) NO. 26548-SA DT- 25.11.10 C Estab
3) BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. Description : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.() Specification : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. C Estab
4) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
5) ROD CLEANING BARREL FOR SMALL ARMS Description : ROD CLEANING BARREL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
7) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
8) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION Description : GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION() Specification : GUIDE SPRING RECOIL FRONT ARDE/SK- 2689/110. DS CAT NO-1005-007774.DC(1)26920-SA DT-26.08.16. (IN FINISHED CONDITION). C Estab
10) TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 Description : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10() Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 C Estab
11) HOOK TO DS CAT NO 5340 015108 Description : HOOK TO DS CAT NO 5340 015108() Specification : HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16 C Estab
12) TOOL CLEANING GAS BLOCK FOR RIFLE 5.56 MM Description : TOOL CLEANING GAS BLOCK FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
13) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
14) SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Description : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006() Specification : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 C Estab
15) SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM Description : SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM() Specification : SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16. C Estab
16) Tool Cleaning Gas Block Drg No. AKC-02, Description : Tool Cleaning Gas Block Drg No. AKC-02,() Specification : AS PER DRG. C Estab
17) PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 Description : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99() Specification : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 C Estab
18) SPRING CONTROL FEED ARM FOR MAG Description : SPRING CONTROL FEED ARM FOR MAG() Specification : DS CAT NO.5360-007527 DC(I) NO.27021-SA DT.28.1.17 IN FINISHED CONDITION C Estab
19) SPRING CIRCLIP FEED PAWL ASSEMBLY FOR MAG Description : SPRING CIRCLIP FEED PAWL ASSEMBLY FOR MAG() Specification : DS CAT NO. 5365-000386 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
20) SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG Description : SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG() Specification : DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG C Estab
21) SPRING CATCH REAR SIGHT CURSOR FOR MAG Description : SPRING CATCH REAR SIGHT CURSOR FOR MAG() Specification : DS CAT NO. 5360-000512 DC(I) NO. 26097-SA DT- 24.9.05 IN FINISHED CONDITION. C Estab
22) SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION. Description : SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION.() Specification : SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION. C Estab
23) FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION. Description : FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION.() Specification : FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION. C Estab
24) 2. CONTROL SPRING CATRIDGE SPRING PAWL Description : 2. CONTROL SPRING CATRIDGE SPRING PAWL() Specification : DS CAT NO. 5360-000517 C Estab
25) SPRING EJECTION OPENING COVER FOR MAG Description : SPRING EJECTION OPENING COVER FOR MAG() Specification : DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 IN FINISHED CONDITION. C Estab
26) SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. Description : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION.() Specification : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. C Estab
27) SPRING CATCH COVER IN FINISHED CONDITION FOR MAG Description : SPRING CATCH COVER IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360 - 003081 DC(I)NO.27018-SA, DT. 27.01.17 C Estab
28) SPRING SEAR TRIPPER FOR MAG Description : SPRING SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5360-000531 DC (I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
29) SPRING CARRYING HANDLE CATCH Description : SPRING CARRYING HANDLE CATCH() Specification : DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
30) SPRING FOR BOLT COVER SPRING FOR SPINDLE TRIGGER FRAME FOR MAG Description : SPRING FOR BOLT COVER SPRING FOR SPINDLE TRIGGER FRAME FOR MAG() Specification : DS CAT NO. 5360-002920 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
31) SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. Description : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION.() Specification : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. C Estab
32) EJECTOR SPRING for MAG Description : EJECTOR SPRING for MAG() Specification : EJECTOR SPRING TO DS CAT NO. 5360-002923 DC(I) NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
33) EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. Description : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION.() Specification : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. C Estab
34) SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG Description : SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG() Specification : DS CAT NO. 5360-002926 DC(I) NO. 25393-SA DT-11.6.2002 IN FINISHED CONDITION. C Estab
35) SEAR SPRING FOR MAG Description : SEAR SPRING FOR MAG() Specification : DS CAT NO. 5360-003082 DC(I) NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION. R Estab
36) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 Description : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Estab
37) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. Description : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Estab
38) OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 Description : OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001() Specification : OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 C Estab
39) CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION. C Estab
40) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
41) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
42) OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 Description : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10() Specification : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 C Estab
43) BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. Description : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Estab
44) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
45) CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. Description : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.() Specification : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. C Estab
46) PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. Description : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Estab
47) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56 Description : RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56() Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 C Estab
2) SPRING HELICAL COMPRESSION PLUNGER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION PLUNGER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION PLUNGER TO DRG.ARDE SK-2689/86 IN FINISHED CONDITION. DS CAT NO. 5360-007212 DC(I) NO. 26548-SA DT- 25.11.10 C Estab
3) BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. Description : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.() Specification : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. C Estab
4) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
5) ROD CLEANING BARREL FOR SMALL ARMS Description : ROD CLEANING BARREL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
7) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
8) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION Description : GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION() Specification : GUIDE SPRING RECOIL FRONT ARDE/SK- 2689/110. DS CAT NO-1005-007774.DC(1)26920-SA DT-26.08.16. (IN FINISHED CONDITION). C Estab
10) TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 Description : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10() Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10 C Estab
11) HOOK TO DS CAT NO 5340 015108 Description : HOOK TO DS CAT NO 5340 015108() Specification : HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16 C Estab
12) TOOL CLEANING GAS BLOCK FOR RIFLE 5.56 MM Description : TOOL CLEANING GAS BLOCK FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
13) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
14) SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Description : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006() Specification : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 C Estab
15) SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM Description : SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM() Specification : SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16. C Estab
16) Tool Cleaning Gas Block Drg No. AKC-02, Description : Tool Cleaning Gas Block Drg No. AKC-02,() Specification : AS PER DRG. C Estab
17) PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 Description : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99() Specification : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 C Estab
18) SPRING CONTROL FEED ARM FOR MAG Description : SPRING CONTROL FEED ARM FOR MAG() Specification : DS CAT NO.5360-007527 DC(I) NO.27021-SA DT.28.1.17 IN FINISHED CONDITION C Estab
19) SPRING CIRCLIP FEED PAWL ASSEMBLY FOR MAG Description : SPRING CIRCLIP FEED PAWL ASSEMBLY FOR MAG() Specification : DS CAT NO. 5365-000386 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
20) SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG Description : SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG() Specification : DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG C Estab
21) SPRING CATCH REAR SIGHT CURSOR FOR MAG Description : SPRING CATCH REAR SIGHT CURSOR FOR MAG() Specification : DS CAT NO. 5360-000512 DC(I) NO. 26097-SA DT- 24.9.05 IN FINISHED CONDITION. C Estab
22) SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION. Description : SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION.() Specification : SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION. C Estab
23) FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION. Description : FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION.() Specification : FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION. C Estab
24) 2. CONTROL SPRING CATRIDGE SPRING PAWL Description : 2. CONTROL SPRING CATRIDGE SPRING PAWL() Specification : DS CAT NO. 5360-000517 C Estab
25) SPRING EJECTION OPENING COVER FOR MAG Description : SPRING EJECTION OPENING COVER FOR MAG() Specification : DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 IN FINISHED CONDITION. C Estab
26) SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. Description : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION.() Specification : SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. C Estab
27) SPRING CATCH COVER IN FINISHED CONDITION FOR MAG Description : SPRING CATCH COVER IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360 - 003081 DC(I)NO.27018-SA, DT. 27.01.17 C Estab
28) SPRING SEAR TRIPPER FOR MAG Description : SPRING SEAR TRIPPER FOR MAG() Specification : DS CAT NO. 5360-000531 DC (I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
29) SPRING CARRYING HANDLE CATCH Description : SPRING CARRYING HANDLE CATCH() Specification : DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
30) SPRING FOR BOLT COVER SPRING FOR SPINDLE TRIGGER FRAME FOR MAG Description : SPRING FOR BOLT COVER SPRING FOR SPINDLE TRIGGER FRAME FOR MAG() Specification : DS CAT NO. 5360-002920 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
31) SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. Description : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION.() Specification : SPRING, FEED STUD TO DS CAT NO. 5360-002921 DC(I) NO. 25393-SA DT- 11/06/2002 IN FINISHED CONDITION. C Estab
32) EJECTOR SPRING for MAG Description : EJECTOR SPRING for MAG() Specification : EJECTOR SPRING TO DS CAT NO. 5360-002923 DC(I) NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
33) EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. Description : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION.() Specification : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. C Estab
34) SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG Description : SPRING CATCH BUFFER BODY PART NO 2125 FOR MAG() Specification : DS CAT NO. 5360-002926 DC(I) NO. 25393-SA DT-11.6.2002 IN FINISHED CONDITION. C Estab
35) SEAR SPRING FOR MAG Description : SEAR SPRING FOR MAG() Specification : DS CAT NO. 5360-003082 DC(I) NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION. R Estab
36) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 Description : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Estab
37) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. Description : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Estab
38) OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 Description : OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001() Specification : OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 C Estab
39) CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION. C Estab
40) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
41) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
42) OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 Description : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10() Specification : OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10 C Estab
43) BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. Description : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Estab
44) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
45) CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. Description : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.() Specification : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION. C Estab
46) PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. Description : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Estab
47) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 3 Point Sling for JVPC Description : 3 Point Sling for JVPC() Specification : 3 Point Sling for JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Spring Locking Nut Pug Gas in Finished Condition Description : Spring Locking Nut Pug Gas in Finished Condition() Specification : Spring Locking Nut Pug Gas in Finished Condition to DRG No. ARDE/SK 3145/42. DS CAT No. 5360-007788 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. Description : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Estab
Category : p
Grade : 3
Size : S
598 MINDRILL SYSTEM & SOLUTIONS PVT. LTD.
NH-6, DOMJUR MAHIYARY ROAD PO-BEGRI, HOWRAH WEST BENGAL
PIN1 : 711411
Phone No. : 03326700032, 9830049281 		CALM07585E

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF T.A. LINK() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) MACHINING OF T.A. GUIDE() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) LUG HOUSING 250KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
4) NOSE PLUG 250 KG, 450KG, 1000LB() AS PER OFM SPECIFICATION C NOT ESTABLISHED
5) BASE TRANSIT 250KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
6) TA GUIDE AS PER DRG. NO. OFM-32845() AS PER OFM SPECIFICATION C NOT ESTABLISHED
7) RING NUT 250KG, 450KG, 1000LB() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : P
Grade : II
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
2) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
3) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]() Specification : DRG. NO. SK-8345/C C Nonestab
4) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION C Nonestab
Category : p
Grade : Grade I
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : M
1) Rifle Factory Ishapur
Name Specification Use Status
1) BODY (FINISH) FOR PISTOL AUTO 9MM 1A.[67]() Specification : BODY TO DS CAT NO 1005-003145 (DC-26821-SA).MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE ASPER COL.(C) OF SL.N C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*[70]() Specification : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94[70]() Specification : BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94 C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.[70]() Specification : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. C Nonestab
Category : p
Grade : Grade II
Size : M
599 Simplex Castings Limited
5, Industrial Estate Bhilai MAHARASHTRA
PIN1 : 490026
Phone No. : 0788-2283031 / 33 / 56
GSTIN : 22AABCS4650E1ZT 		JBPSO1058B

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) Manufacture of C.I. Ingot Mould 175 mm. Dia.() As per MSF Drawing No.- MP/121 R1 R Nonestab
2) Bottom Pouring SG Iron Ingot Mould to size 420 mm. Dia. X 218 mm. long() As per Drawing No. -LFVD/1000/12/A, Rev. 1 Matl. Specn. Spheroidal Cast Iron IS:1865, Grade:400/18 R Nonestab
3) 31 inch C.I. Ingot Mould() As per MSF Drawing No.-OH 1012/72 R2 R Nonestab
4) SG Iron Ingot Mould to size 20" X 2500 mm.() As per MSF Drawing No.- OH / 1012/153 R1 Matl. Specn. S.G.Iron IS:1865, Grade:400/18 R Nonestab
5) C.I. Mould 23" for Radial Forging() As per Drawing No.- OH 1012/150/1 (R1) R Nonestab
6) Bottom Pouring SG Iron Ingot Mould to size 450 mm. X 2250 mm. long() As per Drawing No.- OH 387, Matl. Specn. Spheroidal Cast Iron IS:1865, Grade:400/18 R Nonestab
7) Bottom Pouring SG Iron Ingot Mould to size 385 mm. X 2265 mm. long() As per Drawing No.- OH 391, Matl. Specn. Spheroidal Cast Iron IS:1865, Grade:400/18 R Nonestab
8) Slag Box for Electric Arc Furnace () As per MSF Drawing No.-15 ARC/1000/161/1 R1 R Estab
9) Top Plate and Bottom Plate() As per Drawing No.- LFVD/1000/32 R Nonestab
10) SG Iron Ingot Mould to size 23" X 2100 mm. long() As per Drawing No.- OH/1012/152 R1, Matl. Specn. S.G. Iron IS:1865, Grade:400/18 R Nonestab
Category : P
Grade : I
Size : L
600 INDHRA ENGINEERING & SPARES
Flat No. 133/5, 1st Floor, Annai Flats, Padikuppam Road, Thirumangalam, Anna Nagar West, CHENNAI TAMIL NADU
PIN1 : 600040
Phone No. : 044 26156471
GSTIN : 33ANEPS7606R3ZA 		ANEPS7606R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) ABSOLUTE SEALED LINEAR ENCODER() ND E Established
2) AC SPINDLE MOTOR () ND E Established
3) AC SERVO MOTOR () ND E Established
4) ADAPTER CABLE() 310123-05 E Established
5) ADAPTOR FOR RENISHAW PROBE () ND E Established
6) AK ERM 280 SCANNING HEAD () ND E Established
7) AXIS DRIVE MODULE 70 AMP() ND E Established
8) BATTERY/FAN PLUG IN UNIT() ND E Established
9) BRAKING RESISTANCE MODULE () ND E Established
10) CABLE OLFLEX CLASSIC() 110 12G E Established
11) CARD PCI() SCS02.1P-AN-NN E Established
12) CHECK VALVE () ND E Established
13) CLOSED LOOP CONTROLLER CARD () ND E Established
14) CONNECTOR FOR SIMO DRIVE () ND E Established
15) CONTROLLER CARD FOR 54 AMP DRIVE () ND E Established
16) COOLING UNITS FOR PANELS () ND E Established
17) CPU CARD() 6ES7216-2AD23-0XB0 E Established
18) ELECTRONIC IMAGE DISPLAY SCREEN () ND E Established
19) ENCODER,2048 PPR() 1325-2048 E Established
20) ENCODER CABLE () ND E Established
21) ENCODER ROD () 426B E Established
22) ENCODER COUPLING () ND E Established
23) E/R MODULE 16/21 KW () ND E Established
24) EXE 602E UNIT () 246842-02 E Established
25) HORIZONTAL KEY BOARD () ND E Established
26) HYDRAULIC PRESSURE RELIEF VALVE () ND E Established
27) HYDRAULIC PUMP() ND E Established
28) HPU UNIT SIROTEC-RCM-PHG () ND E Established
29) HIGH FREQUENCY REACTOR () ND E Established
30) INCREMENTAL ENCODER WITH 1-V () ND E Established
31) INCREMENTAL SEALED LINEAR ENCODER () ND E Established
32) INCREMENTAL ROTARY ENCODER () ND E Established
33) INDRA DRIVE FOR AXIS () ND E Established
34) INDRA DRIVE MAIN FILTER () ND E Established
35) LT MODULE 80 AMPS () ND E Established
36) OPERATOR PANEL () ND E Established
37) OPERATOR PANEL DISPLAY UNIT () ND E Established
38) OMP60 PROBE OPT() ND E Established
39) OPTICAL CABLE () ND E Established
40) MI12 INTERFACE UNIT () ND E Established
41) MACHINE CONTROL PANEL () ND E Established
42) MULTI FUNCTION TIMER () ND E Established
43) N1 CONTROLLER CARD () ND E Established
44) PCI CARD () ND E Established
45) PC ADAPTER USB PACKAGE () ND E Established
46) PCU 50, 128MB, 566 MHZ() ND E Established
47) POWER CABLE PREASSEMBLED () ND E Established
48) POWER MODULE () ND E Established
49) QUILL MOVEMENT MOTOR () ND E Established
50) SCREW SPINDLE PUMP () ND E Established
51) SCANNER HEAD FOR LINEAR SCALE () ND E Established
52) SEVO MOTOR IFT6() ND E Established
53) SIMATIC DP BASIC MODULE () BM142 ET200 E Established
54) SIMATIC BOX () PC 827B E Established
55) SIMATIC DP CONNECTING BLOCK () ND E Established
56) SIMATIC FLAT PANEL 15T () ND E Established
57) SIMATIC DP, 5 ELECTRONIC MODULES () ND E Established
58) SINAMICS S120 SINGLE MOTOR MODULE () ND E Established
59) SINAMICS S120 DOUBLE MOTOR MODULE() ND E Established
60) SINAMICS HFD LINE REACTOR FOR 36KW () ND E Established
61) SIMATIC S7-300 INTERFACE MODULE() ND E Established
62) SINAMICS SENSOR MODULE S120 () ND E Established
63) SINAMICS S120 SMARTLINE MODULE () 611 E Established
64) SIMODRIVE () ND E Established
65) SINAMICS S120 ACTIVE MODULE () ND E Established
66) SINAMICS CONTROL UNIT () CU320-2DP E Established
67) SINAMICS DRIVE-CLIQ MODULE CABINET () ND E Established
68) SINAMICS S120 SENSOR MODULE SMC20 () ND E Established
69) SINAMICS TERMINAL MODULE () TM31 E Established
70) SINAMICS S120 SMART LINE MODULE () ND E Established
71) SINUMERIK OPERATOR PANEL () ND E Established
72) SIGNAL CABLE PREASSEMBLED () ND E Established
73) SIGNAL CONNECTOR 12 PIN () ND E Established
74) SINAMICS SMI20,COMPACT FLASH CARD () ND E Established
75) SPINDLE DRIVE SIMOREG DC MASTER () ND E Established
76) STRAIGHT PNEUMATIC GRINDER () LFB 44 E Established
77) SINAMICS CAPACITOR MODULE,INPUT() ND E Established
78) SINUMERIK MACHINE CONTROL PANEL() ND E Established
79) SINUMERIK 840D SL,NCU 710.3B PIN() ND E Established
80) SINUMERIK 840 D/DE,CNC-HARDWARE() ND E Established
81) SINUMERIK NCU 571.5 () ND E Established
82) SINUMERIK CNC HARDWARE () 828D E Established
83) SINUMERIK OPERATOR PANEL FRONT () ND E Established
84) SINUMERIK VERTICAL KEY BOARD () 802DSL E Established
85) SIROTIC CABLE() ND E Established
86) SUPPLY AND INSTALLATION OF SIEMENS () ND E Established
87) STYLUS, RENISHAW MAKE () ND E Established
88) SUPPLY & INSTALLATION OF AXIS DRIVE () ND E Established
89) VISUAL DISPLAY UNIT () FP77 E Established
90) VIDEO INTERFACE CARD () ND E Established
Category : DP
Grade : II
Size : S