Specification : SUPPORTING CLAMP TO DRG NO. 172.03.038CB
C
Nonestab
4) CLUTCH SHAFT ASSY TO 6206419017[62]()
Specification : CLUTCH SHAFT ASSY TO 172.63.068CB
C
Nonestab
5) LOCK HANDLE TO 6206109012[62]()
Specification : LOCK HANDLE TO 432.11.007CB-1
C
Nonestab
6) ROLLER SUPPORT TO 6206203018[62]()
Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PAD TO 6201070149[62]()
Specification : PAD TO DRG. NO.188.70.001-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) PIN LOCK BUTTON FOR RIFLE 5.56MM EXCALIBUR.()
AS PER DRAWING.
C
Not Estab.
2) FIRING PIN NUT FOR 30-06 SPORTING RIFLE.()
AS PER DRAWING.
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HINGE TO 6201004080[62]()
Specification : 184.04.005-1
C
Nonestab
2) LEVER ASSY TO 6201095016[62]()
Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CONE (SK NO OTF/S/015) TO DRG NO 4-025998 DET NO 069 FOR 125MM HEAT[62]()
Specification : CONE (SK NO OTF/S/015) DRG NO 4-025998 DET NO 069 FOR 125MM HEAT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION.[70]()
Specification : CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX-331 DC NO.- 37263, DT 26.08.2010[63]()
Specification : AS PER REQUIRED SPECIFICATION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) EXTRACTOR ASSY.. F-1303-007320 D[71]()
Specification : EXTRACTOR ASSY. TO PART DRG. NO. F1303-007320D
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Pin Release IN FINISHED CONDITION[63]()
Specification : PIN RELEASE IQX-320 IN FINISHED CONDITION. DC NO. 36997-A, DT. 25.01.2005
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BASE PLATE IN F/ COND. TO DRG. NO. F-1321-425450C FOR FUZE FFV 64C[63]()
Specification : DRG. NO. F-1321-425450C FOR FUZE FFV 64C
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO. CTM-0033A IN FINISHED CONDITION[70]()
Specification : TRIGGER WITHOUT NICKEL PLATING TO DRG. NO. CTM-0033A IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)[70]()
Specification : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LEVER SEAR TO DRG. NO.M-8202F(PB-16) FOR 0.32[70]()
Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION[70]()
Specification : EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]()
Specification : DRG. NO. SK-8345/C
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Magazine to DRG. NO. IQX-1012 IN FINISHED CONDITION[63]()
Specification : Part No QX 1539 for Fuze 117 Mk-20
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
2) NUT FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PERDRG. NO. AR/01/23 ALT[70]()
Specification : NUT FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PERDRG. NO. AR/01/23 ALT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLOCK REAR BLANK FOR GHAATAK[70]()
Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER HOLDER FOR 12 BORE PUMP ACTION GUN[70]()
Specification : LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) ARM SEAR CONNECTING FOR 9MM AUTO PISTOL.[70]()
Specification : ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH HAMMER FOR REVOLVER .32"[70]()
Specification : Catch Hammer to DRG No. PHMK-II-6-4 in finished condition
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition[70]()
Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK)
TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789
C
Nonestab
2) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM[70]()
Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition
C
Nonestab
3) PAWL HAMMER DRG NO. SK2689/170[70]()
Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition
C
Nonestab
4) Catch Trigger to DRG No. PHMK-III-7-2[70]()
Specification : Catch Trigger to DRG No. PHMK-III-7-2
Specification : BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315[70]()
Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle
C
Nonestab
2) SEAR TO DRG NO.29P 0060*2 required for 0.315[70]()
Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle
C
Nonestab
3) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
C
Nonestab
4) CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315[70]()
Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle
C
Nonestab
5) BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315[70]()
Specification : AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle
C
Nonestab
6) BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315[70]()
Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle
C
Nonestab
7) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR SAFETY (ICR-1281) (L.F.7011606010)[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1[70]()
Specification : AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
C
Nonestab
2) REGULATOR GAS TO (ICR 1247) DRG.NO. TEND 1877*4[70]()
Specification : AS PER (ICR 1247) DRG.NO. TEND 1877*4
C
Nonestab
3) SEAR TO DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)[70]()
Specification : AS PER DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR TO DRG NO 33P 3052[70]()
Specification : AS PER DRAWING
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle
C
Nonestab
2) PAD SLING TO DRG.NO.29P 0037 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0037 required for 0.315" Sporting Rifle
R
Nonestab
3) PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
4) SWIVEL SLING FRONT 29P 0070* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle
C
Nonestab
5) SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
2) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEAR FOR 9MM AUTO PISTOL.[70]()
Specification : SEAR TO DS CAT NO. 1005-003172 (LT.DC-26819-SA DT.22.04.16)1)MACROETCH TEST TO ASTME 381-1984 WILL BE AS PR COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.12)NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OFCQA(SA) NOTE SHEET NO.1 (FO
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SLIDE REAR SIGHT FOR 30-06 SPORTING RIFLE()
As per Drawing
C
Nonestab
2) BRACKET REAR SIGHT FOR 0.22[70]()
Specification : STEEL BS 970 En19A
C
Nonestab
3) BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE.[70]()
Specification : BS:970 PT.1 GR 070 M55 OR En-9
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER,TRIPPING[70]()
Specification : LEVER,TRIPPING TO DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016).MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PERCOL.(C) OF SL. NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163-82 WILL BE AS PER COL.(C) OF SL. NO.3OF CQA(SA) NOTE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER SLIDE LOCKING BLANK (RFI SK-8035*3) FOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) WEDGE ASSY TO 6206809012[62]()
Specification : WEDGE ASSY TO DRG NO. 172.20.029CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACE ASSY[06]()
Specification : BRACE ASSY / 54.28.772CBCB
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) POINTER ASSY / 188.95.003CBCB[06]()
Specification : POINTER ASSY / 188.95.003CBCB
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST DISC / 172.95.060[06]()
Specification : THRUST DISC / 172.95.060
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST BUSHING / 175.95.114-1[06]()
Specification : THRUST BUSHING / 175.95.114-1
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FIXTURE FOR PRESSING OUT BUSHING,PART 432.43.046 FINAL DRIVE ASSY / 432.95.333CBCB[06]()
Specification : FIXTURE FOR PRESSING OUT BUSHING,PART 432.43.046 FINAL DRIVE ASSY / 432.95.333CBCB
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LINK HAMMER FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3
Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHAFT TO 6206102096[62]()
Specification : SHAFT TO DRG NO. 166.29.305CB
C
Nonestab
2) FRAME ASSY TO 6206207012[62]()
Specification : FRAME ASSY TO DRG NO. 172.22.011CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD HINGED FRONT LEFT HAND TO 6206803352[62]()
Specification : SHIELD HINGED FRONT LEFT HAND TO DRG NO.184.04.029CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD REAR LEFT HAND TO 6206803050[62]()
Specification : SHIELD REAR LEFT HAND TO DRG NO.172.04.198CB
C
Nonestab
2) SHIELD REAR RIGHT HAND TO 6206803052[62]()
Specification : SHIELD REAR RIGHT HAND TO DRG NO.172.04.200CBCB
C
Nonestab
3) SHIELD HINGED FRONT RIGHT HAND TO 6206803351[62]()
Specification : SHIELD HINGED FRONT RIGHT HAND TO DRG NO. 184.04.028CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET CELL LIFTING TO 6206890004[62]()
Specification : BRACKET CELL LIFTING TO DRG NO. 175.28.002CB-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LOUVER LH TO 6209801477[62]()
Specification : PV572.0718.2363
C
Nonestab
2) LOUVER RH TO 6209801480[62]()
Specification : PV572.0718.2362
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LH LEVER ASSY TO 6206403001[62]()
Specification : LH LEVER ASSY TO DRG NO. 172.42.003CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEVER ASSY TO 6201095016[62]()
Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RWA BRACKETS (07 TYPES) ()
SERVICE ASSISTANCE
C
Not Established
2) MACHINING ASSISTANCE FOR SMALL, MEDIUM & LARGE COMPONENTS()
AS PER DRG
C
Non Established
Category : P
Grade : II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF CENTRAL SPIDER SPROCKET DRG NO 9 A 621 00 001 FROM RAW MATERIAL[91]()
Specification : FABRICATION OF CENTRAL SPIDER/SPROCKET DRG NO. 9-A-621.00.001 FROM RAW MATERIAL CENTRAL SPIDER/SPROCKET DRG. NO. M-11467 MACHINING AFTER HEAT TREATMENT AS PER PROCESS SCHEDULE
R
Nonestab
2) SEMI STAGE MACHINING OF CENTRAL SPIDER SPROCKET TO DRG NO M 11441 FROM INPUT MATERIAL[91]()
Specification : SEMI STAGE MACHINING OF CENTRAL SPIDER/SPROCKET TO DRG NO M-11441 FROM INPUT MATERIAL I/CODE NO. 0372150165 (MACHINING AS PER PROCESS SCHEDULE)
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]()
Specification : LEFT HAND SUCTION PUMP COVER TO DRG NO. 172.46.009CB-2CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019
Description : FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019()
Specification : FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019
C
Estab
2) FABRICATION OF PINION TO DRG NO AO 18 03 025
Description : FABRICATION OF PINION TO DRG NO AO 18 03 025()
Specification : FABRICATION OF PINION TO DRG. No. AO-18.03.025
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981[91]()
Specification : COMPLETE MACHINING OF BREECH PIECE (AO-18.01.001), FROM INPUT MATERIAL I/C:- 7230971001 TO BE SUPPLIED BY GSF (I/C-9140033981)
C
Nonestab
2) SHUTTER BUSH AO 18 01 029 IN FINISHED CONDITION IC 7200200298[72]()
Specification : SHUTTER BUSH (AO-18.01.029) IN FINISHED CONDITION (I/C-7200200298)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FENCE TO 6206109006[62]()
Specification : FENCE TO DRG NO. 172.11.026CB-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BODY ASSY TO 6206861005[62]()
Specification : BODY ASSY TO DRG NO. 172.52.046CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PIPE LINE TO 6201066098[62]()
Specification : PIPE LINE TO DRG NO. CQA(HV)5.66.066
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacturing and supply of barrel blank after honing stage[70]()
Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CLUTCH SHAFT ASSY TO 6201063014[62]()
Specification : CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL[91]()
Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC[71]()
Specification : HEAD AUTOMATIC COCKING RAMMER ASSY. TO DRG NO. 2007475 IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET ASSY TO 6201015010[62]()
Specification : BRACKET ASSY TO DRG NO. 188.15.018CB-3CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FILLER CAP 011[62]()
Specification : FILLER CAP 172.41.011
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
2) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270[91]()
Specification : Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF[90]()
Specification : MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056720 PART M A OF RB TO DRG GCF 20A SK874[90]()
Specification : 9070056720 PART M A OF RB TO DRG GCF 20A SK874
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) PLATE TOP TO 6106801853
Description : PLATE TOP TO 6106801853()
Specification : V572.0175.8000
C
Estab
2) PLATE BOTTOM TO 6106807332
Description : PLATE BOTTOM TO 6106807332()
Specification : V572.0175.8025
C
Estab
3) ECCENTRIC TO 6201017011
Description : ECCENTRIC TO 6201017011()
Specification : 188.17.006-1
C
Estab
4) LEVER ASSY TO 6206419050
Description : LEVER ASSY TO 6206419050()
Specification : 175.63.047CB
C
Estab
Category : p
Grade : 2
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BREECH RING AS PER DRG NO 1002378 FOR BREECH MECH ASSY FOR 40 MM L70 GUN[90]()
Specification : FABRICATION OF BREECH RING AS PER DRG. NO. 1002378 FOR BREECH MECH. ASSY. FOR 40 MM L-70 GUN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF CASING DRG NO AO 18 02 001[91]()
Specification : FABRICATION OF CASING DRG NO. AO-18.02.001 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BODY ICR 1325[00]()
Specification : CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514 (I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I, (II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II, FROM FORGING DRG. NO. RFI/SK/725/1 L. (ICR 1325)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CENTRAL SPIDER 9 A 621 00 001 IN FINISHED CONDITION[72]()
Specification : DISC, PWF 12.7MM DAI,TO SPECN:JSS- 9310-06;2002, REAFD. 2011 DC NO.5044 ME, DT.15.12.11 AS PER DRG.NO.IQX-144- GF,ITEM NO.4.
C
Nonestab
4) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-[62]()
Specification : DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-13:2014,REV-3,DC:5257-ME, DT.18.06.14 PA 1992 WAXED (REF: DESIGNERS REF. NO.CIA/AMN/2176,PART NO.ISX-77GF,ITEM NO-9 DC:37013-A,DT.06.05.2005)
C
Nonestab
5) CARTON EMPTY TO DESIGN. REF. NO. S.DETAIL. 1852 DC NO[62]()
Specification : CARTON EMPTY TO DESIGN. REF. NO. S.DETAIL. 1852 DC NO.30102-A DT.11.01.75 FOR CE PELLET (MK 1/1/L, 53.16 GM) TO DRG.NO. SX 12 AF. DC NO.35462-A DT.07.09.93.
C
Nonestab
6) DISC PAPER WHITE FINE , 30.99MM DIA MATERIAL:-PAPER WHITE FINE AMMN[62]()
Specification : DISC PAPER WHITE FINE , 30.99MM DIA MATERIAL:-PAPER WHITE FINE AMMN.TO JSS:9310-06:2002, DC:5044-ME, DT.15.12.11 REAFFIRMED 2011 SUBSTANCE-42-46 GSM) FOR CE PELLET MK 1/1/L, 53.16 GRAM TO DRG. NO.SX 12 AF.
C
Nonestab
7) PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) TO SPEC.JSS-8135-05:2013[14]()
Specification : PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE: 482*635*0.15 to 0.18 MM (T).
C
Nonestab
8) DISC PAPER WHITE TO DRG.NO-QX-1534 D.C.[62]()
Specification : DISC PAPER WHITE TO DRG.NO-QX-1534 D.C. NO.36123A DATED:06.06.96
C
Nonestab
9) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014[61]()
Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95.
C
Nonestab
10) PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE[62]()
Specification : PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE TO SPECN.JSS-9310-06: 2002,DC NO:3738-ME,DT.17.09.2002 (REAFFIRMED 2011)
C
Nonestab
11) STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE[65]()
Specification : STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE 42-46 GSM TO SPECN.JSS-9310-06: 2002 (REAFFIRMED 2011).
C
Nonestab
12) DISC TO DRG.NO.FD 537 TO DRG. PART NO[65]()
Specification : DISC TO DRG.NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
C
Nonestab
13) CARTON BOARD SIZE(260X70X0.51)MM TO JSS 67-07[14]()
Specification : CARTON BOARD SIZE(260X70X0.51)MM TO JSS 67-07:APR 65.(ONE SIDE WHITE) DC NO.3253-ME DT.14.01.95.
C
Nonestab
14) DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD[64]()
Specification : DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD TO JSS-9310-01 :2014 , REV-3,DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN. JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME,DT. 12.3.99 REF DRG.NO.4-0270
C
Nonestab
15) PAPER WASHER (SIZE:-OD-30MM,ID-24MM THICK-0.254 +/-0.025 MM)[62]()
Specification : PAPER WASHER (SIZE:-OD-30MM,ID-24MM THICK-0.254 +/-0.025 MM),MATERIAL SPECN:-BOARD GLAZED CALENDERED AMMUNITION TO SPECN:JSS:8135-13:2007 REV NO-2,DC-3554- ME, DT.12.03.99 WITH CUPPING QUALITY.(MATERIAL TO BE WAXED BY WAX PARAFFIN)
C
Nonestab
16) DISC-IV NO.01[61]()
Specification : DISC-IV NO.01 TO SPECN:OST-84-796-78,INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAZED CALANDER AMMN TO JSS:8135-13:1998 DC NO.3554-ME 12.03.99 OR MILL BOARD AMMN. (CUPPING QUALITY) TO JSS:9310-01:1994, DC NO.3279-ME, DT.21.02.95.
C
Nonestab
17) DISC-II NO.23[61]()
Specification : DISC-II NO.23 TO SPECN:OST-84-796-78,INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAGED CALANDER AMMN TO JSS:8135-13:2007,REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS:9310-01:2007-REV.2.
C
Nonestab
18) DISC[63]()
Specification : DISC TO DRG.3-027321-4B2-4,DC NO- 36811-A,DT.14.02.2002
1) WAX PAPER KRAFT CUP DISC TYPE, SIZE: 194 DIA+/- 1MM, THICKNESS-0.18MM)()
MATERIAL: PAPER KRAFT AMMN. TO SPECN: JSS-8135-017:2002, DC.NO.3731-ME, 16.05.2002. SUBSTANCE:125+/-5GSM (NOTE-MATERIAL WAXED WITH PARAFFIN WAX SPECIAL TO SPECN:JSS-9160-06, DC-3768-ME, DT.17.06.2003)
C
Not Estab
2) PAPER BROWN (WAXED), 320*280(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-1994, DC NO.3732-ME DT.16.05.2002.
C
Not Estab
3) PAPER BROWN (WAXED), 280*195(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013-REV.4 DC-5186-ME DT.19.03.14.
DRG.NO.QX-211DC NO-35703-A,DT.03.05.94 FOR FUZE 117 MK-20
C
Not Estab
11) WASHER GLAZE BOARD ()
DRG.NO.QX-175DC NO:36103-A, DT.29.03.96 [ MATERIAL:GLAZE BOARD TO JSS-8135 -13-2014 Rev 3 5257-ME , DT-18.06.14 OR CARTON BOARD TO JSS-8135-15-2010 REV-2 , DC NO . 4066 ME , DT-19.07.10
C
Not Estab
12) CYLINDER()
DRG.NO.BL/CD/CC-130/035DT.16.04.2001. (REF.DRG.NO:3-022483/54-bH-482/13, DC NO: 36134-A, DT.04.07.96 NOTE: TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE: LENTH: 50MM x ID: 115MM.
C
Not Estab
13) MILL BOARD DISC TO SIZE: 93 MM DIA x 3 MM THICK (WAXED)()
DRG.NO:CIA/AMN/2650,DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 MATERIAL:MILL BOARD TO JSS:9310-01-2014-Rev-3 DC-5290 DT.04.02.2013.
JSS:9310-06:2011, DC: 5044 ME, DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO. CIA/AMN/2176, PART NO-ISX-77 GF, ITEM NO-3, DC:37013-A,DT.06.05.2005
C
Not Estab
16) PELLET COVERING ()
DRG. CIA/AMN/ 1901 DET.4, PART NO: IQX 785 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL-70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.03.03.93
C
Not Estab
17) DISC()
DRG. CIA/AMN/1901 DETAIL.2PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL:PAPER WHITE FINE TO SPECN.JSS 9310-06:2002 REAFFIRMED 2011]
C
Not Estab
18) DISC PAPER WRAPPING HARD, 30.99 MM DIA.()
MATERIAL-PAPER CRAFT AMMN. TO SPECIFICATION JSS: 8135 -017:2010, DC-5016-ME DT.16.03.2011 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93.
C
Not Estab
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PAPER WRAPPING WAXED KRAFT AMMUNITION ()
SPCN NO.JSS8135-05-2013 DC NO.5186-ME DT. 10-03-2014 REVISION NO. R IN ROLL OF WIDTH 112 CMS AND LENGTH 180 MTER S G.S.M 85-105 GRAM
R
Not Estab
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1422006617 GLAZED BOARD 1.00 X 700 X 525 MM[14]()
Specification : GLAZED BOARD CALENDERED AMMUNITION TO SPECN. JSS 8135 -13 DC3554-ME SIZE 700 X 500 X 0.20 MM SUBSTANCE :- 250 +- 25 GSM.
R
Nonestab
2) 1422005228 GLAZED BOARD[14]()
Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PRESS PAHN BOARD DISC[14]()
Specification : PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Piece Packing Mill Board[25]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Nonestab
2) PAPER CORRUGATED AMMUNITION[14]()
Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.
R
Nonestab
3) PAPER WRAPPING WAXED CRAFT AMMUN[14]()
Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05-2013 REV.NO 4, DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
R
Nonestab
4) PAPER WASHER GLAZED BOARD[64]()
Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
R
Nonestab
5) PAPER WHITE FINE AMMUN[14]()
Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Corrugated Card Board Box[14]()
Specification : CORRUGATED CARD BOARD BOXES AS PER DRG.NOS.OFBA/BT/52 G/1, OFBA/BT/52 G/1/1,OFBA/BT/52/W,OFBA/BT/53 G/1,OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE.OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) CARTON BOARD AMMN (787.4 x 558.8 x 0.508)[14]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Estab
2) CARTRIDGING PAPER Gr II
Description : CARTRIDGING PAPER Gr II()
Specification : CARTRIDGING PAPER GR-2 MACHINE GLASED(ONE SIDE ONLY) IN ROLL,BOBBIN DIA OF 800 MM, BOBBIN CENTER SLEEVE DIA OF 70 MM AND ROLL WIDTH OF 170 MM AS PER SPECN IS:1397 : 1990,Second Revision (Amendment NO 1)REAFFIRMED 2002.
R
Estab
Category : p
Grade : 2
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF 610 mm TO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS 9310 03 2010 REV 1 DC 5023 ME EXCEPT FOR BURSTING STRENGTH WHICH SHOULD BE BETWEEN 125 AND 250 KPa()
Specification : JSS 9310 03 2010 REV 1 DC 5023
R
Estab
2) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF610 mm TO 914 mm WIDTH AND DIA OF ROLLS 450 mm TO 600 mm.SPECN.JSS 9310-03()
Specification : JSS 9310-03 :2010
R
Estab
3) PAPER KRAFT AMMUNITION 635 MM X 482.6 MM X 125(DS CAT 8135-000 349) PLUS MINUS 5 GMS. PER SQUARE METRE. TO SPECN .JSS : 8135-017()
Specification : JSS : 8135-017:2002
R
Estab
4) PAPER WHITE FINE .051MM TH.42-46 GSM.()
Specification : JSS 9310-06:2002
R
Estab
5) MILL BOARD AMMN 762X1016X2.50 MM()
Specification : JSS 9310-01:2014
R
Estab
6) CARTON BOARD 787.4X558.8X0.508MM()
Specification : JSS 8135-15 :2010
R
Estab
7) BOARD CARTON AMMN. SIZE 870 mm X 620 mm X 0.508 mm+- 0.051 MM THICK ( INCLUDING PURE KRAFT LINING ) TO SPECN.JSS 8135-15()
Specification : JSS 8135-15 : 2010
R
Estab
8) CARTON BOARD787.4X1117.4X0.762 MM()
Specification : JSS :8135-15:2016
R
Estab
9) BOARD CARTON1SIDE WHITE31"X44"X.03"()
Specification : JSS:8135-15:2016
R
Estab
10) PAPER FOILING 762 X 508()
Specification : JSS -9310-06-2002
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO
Description : DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO()
Specification : DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO. 35983-A DT.29.7.95 MATERIAL:MILL BOARD TO JSS:9310-01-2014 REV-3 DC - 5290 ME DT.16.12.14
C
Estab
2) STRENGTHENED COVER TO DRG.3-022483
Description : STRENGTHENED COVER TO DRG.3-022483()
Specification : STRENGTHENED COVER TO DRG.3-022483 /54-bH-482/12,DC NO.36134-A, DT.04.07.96
C
Estab
3) PAPER TUBE(AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm_6390100003
Description : PAPER TUBE(AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm_6390100003()
Specification : PAPER TUBE(AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO MATERIAL SPECN. PAPER CRAFT AMMN TO JSS 8135-017:2002, REF. 2010 DC. 5016-ME DT 16.03.11
C
Estab
4) GLAZED BOARD WASHER TO DRG.NO.FD672
Description : GLAZED BOARD WASHER TO DRG.NO.FD672()
Specification : DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.
C
Estab
5) DISC TO DRG.NO.2-013535/53-00-482M
Description : DISC TO DRG.NO.2-013535/53-00-482M()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/ 14, DC NO. 36785-A, DT. 08.10.2001.
C
Estab
6) BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM
Description : BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM()
Specification : SPECN. JSS:8135-13:2014 REV-3 DC.NO.5257 ME DTD.18.06.14.
C
Estab
7) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA
Description : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA()
Specification : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95. MATERIAL: MILL BOARD TO JSS-9310-01-2014 REV-3 DC. 5290 ME DTD-16-12-14.
C
Estab
8) PACKING TO DRG
Description : PACKING TO DRG()
Specification : PACKING TO DRG.NO.4-24929/3 K33/001 DC NO. 35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME, DT.12.12.02.]
C
Estab
9) DISC(WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO
Description : DISC(WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO()
Specification : DISC(WAXED) 128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO.ISV-483 GA. DC-35983-A DT.29.07.95 MATERIAL MILL BOARD TO SPEC JSS- 9310-01-2014 REV-3 DC-5290-ME DT-16.12.14.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Board Corrugated Ammn. Double Faced[14]()
Specification : Size :- 690mm X 672mm X 3.5mm +/- 0.35mm Thick.
Coarse Flute. Specification : JSS-8135-08-2014 (Revision No. 4) DC No. 5314-M Dtd. 11-03-2015.
Defence Store Catalogue No. 8135-000 271
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOARD GLAZED CALENDERED AMMN 787 X 558 X 1.25 MM THICK[14]()
Specification : JSS 8135-13:1998
R
Nonestab
2) MILL BOARD 787MM X 558MM X 5MM THICK[14]()
Specification : JSS-9310-01:2007
R
Nonestab
3) MILL BOARD SIZE : 1016 X 762 X 2.5MM +/- 0.35MM[14]()
Specification : JSS-9310-01-2007
R
Nonestab
4) MILL BOARD SIZE 787 MM X 559MM X 1.25 MM THICK[10]()
Specification : JSS 8135-13: 2007
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PAPER BASE WAD FOR PAPER CARTG.CASE[14]()
Specification : JSS 9310-03 :2010
R
Nonestab
2) PAPER CORR.SING 787X558X3 MM THICK[14]()
Specification : JSS 8135-08-2014
R
Nonestab
3) CORRUGATED PAPER SHEET 690 MM X 672 MM X 3 MM THICK[14]()
Specification : JSS: 8135-08:2014
R
Nonestab
4) PAP.WHITE FINE .051MM TH.42-46 GSM.[14]()
Specification : JSS 9310-06:2002
R
Nonestab
5) PAPER FOR CARTG. CASES AMMN. IN REEL[14]()
Specification : JSS:8135-09:2004
R
Nonestab
6) PAPER TISSUE 508X762X0.0279MM THICK[14]()
Specification : JSS 8135-14:2010
R
Nonestab
7) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115[14]()
Specification : JSS:8135-09:2004
R
Nonestab
8) CARTON FOR 12 BORE PAPER 2.1/2[99]()
Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTON BOARD 787.4X558.8X0.508MM[14]()
Specification : JSS 8135-15 :2010
R
Nonestab
2) BOARD CARTON 870 X 620 X 0.508 MM[14]()
Specification : JSS 8135-15 : 2010
R
Nonestab
3) BOARD CARTON1SIDE WHITE31X44X.03[14]()
Specification : JSS:8135-15:2016
R
Nonestab
4) CARTON FOR PACKING 12 BORE CARTG[65]()
Specification : DRG.NO.AFK/SK/2483 SHEET NO.1
C
Nonestab
5) SEPARATORS FOR CARTON 23 A.[65]()
Specification : DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) MILL BOARD AMMN 762X1016X2.50 MM[14]()
Specification : JSS 9310-01:2014
R
Nonestab
2) MILL BOARD 787.4X558.8X2.5MM THICK[14]()
Specification : JSS:9310-01:2014
R
Nonestab
3) MILL BOARD AMMN 787.4 MM X 558.8 MM X 1.25 MM[14]()
1) 100 Percent Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm min[21]()
Specification : 100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
2) 100 Percent Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm min[21]()
Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.)
Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) FABRIC PLAIN WEAVE FLAME RETARDANT BLUE 150 CM WIDTH EXCLUDING SELVEDGES[21]()
Specification : 1201908/001
R
Nonestab
2) PU Coated Heat Sealable Nylon Fabric Navy Blue 150 Cm Excluding Selvedge[21]()
Specification : PROV/1201905/002 (a)
R
Nonestab
3) PU Coated Heat Sealable Nylon Fabric Black 150 cm Excluding Selvage[21]()
Specification : PROV/1201905/002(a)
R
Nonestab
4) PU COATED NYLON FABRIC IN BLACK COLOUR 150 CMS EXCLUDING SELVEDGES[21]()
Specification : PROV/1201905/001(a)
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Polyester Round Mesh Interlining Fabric Black – 90 cm Width (minimum) excluding selvedges()
As per Specification & Requirement
R
Not Estab
2) Cloth Polyester Filament Woven Dark Blue - 150 cm Width (minimum) excluding selvedges()
6) FABRIC NYLON BLACK 250 GMS PU COATED 172 CMS WIDE()
IND/TC/0155 Except Threads/Cm (As per Appendix G of IND/TC/3844(a))
R
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) HDPE WOVEN FABRIC 100 CM WIDTH()
AS PER SUPPL.NO.TEX 1/1299/82/2 APPENDIX "C" TO PROV. SPECIFICATION NO. S/2590/CAP FS ARMY LOGO/TC 15(a) AS PER PMS SCHEDULE NO. CQA (T&C)/PMS/35D. AS PER CQA (T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
R
Not Estab.
2) FABRIC NYLON 220 GSM. WHITE WATER & OIL REPELLENT 100 CM()
IND/TC/0160 AS PER RELEVANT CLAUSE OF SPECIFICATION
R
Not Estab.
3) Polyester Round Mesh Interlining Fabric()
AS PER ANNEXURE - B OF OCFAV/GARMENT/002(b)AS PER RELEVANT CLAUSE OF SPECIFICATION
R
Not Estab.
4) FABRIC NYLON 75 GSM WHITE PU COATED 152 CMS (MINIMUM)()
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELE
Specification : Fabric Nylon 300 GSM RIPSTOP PU COATED FLAME RETARDANT 152 CMS WIDE SPECN.IND/TC/0155 AND AS PER ANNX 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a) AS PER SPECIFICATION.
R
Nonestab
Category : DP
Grade : I
Size :
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) BLACK MESH LINING OF 200 GSM WITH ANTIBACTERIAL TREATMENT, WIDTH -150CMS MIN.[21]()
Specification : IND/TC/3847(A),AS per terms & condition enclosed.
NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY.
R
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) BLACK MESH LINING OF 200 GSM WITH ANTIBACTERIAL TREATMENT, WIDTH -150CMS MIN.[21]()
Specification : IND/TC/3847(A),AS per terms & condition enclosed.
NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY.
R
Nonestab
2) NET MOSQUITO POLYESTER ROUND MESH O.G[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CLOTH ACRYLIC RAYON WHITE CL-1[21]()
Specification : CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) (PROV) GRADE A DC NO. 3522 ME DATED 26.06.98. WIDTH NOT LESS THAN 1.22 METRE.
R
Estab
2) Cloth Cotton Cambric White 45 Inches Wide( 115 cm )[21]()
Specification : CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.
R
Estab
3) Dosuti Cloth Cotton 36' wide[21]()
Specification : CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-1977. (Second Revision) Reaffirmed- 2002 AMDS 5.
R
Estab
4) CLOTH COTTON DOWN TIGHT WHITE FOR M4A2 &CH 9[21]()
Specification : WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.
R
Estab
5) CLOTH CHINA SHEETING[21]()
Specification : CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).
R
Estab
6) CLOTH ACRYLIC WHITE[21]()
Specification : CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)(PROV) DC 3522-ME DT.26.6.98. WIDTH NOT LESS THAN 1 MTR.
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385
Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN()
CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241 -A,DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-
C
Not Estab
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN[63]()
CQA (A) DRG.NO.bw.3.140.039.cb/c, DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
2) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.N
C
Estab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
4) ASSEMBLY OF S&A (EMPTY) COMPONENTS FOR FUZE FB-40 OF 40 MM PFFC AMMN. (9911357765)[99]()
Specification : AS PER SPECIFIED DRG. & SPECIFICATION
C
Estab
5) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Estab
6) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
2) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.
C
Nonestab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
4) ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765)[99]()
Specification : ASSEMBLY OF S&A (EMPTY) COMPONENTS,CONSISTING OF FOLLOWING COMPONENTS AS PER ATTACHED LIST.NOTE- QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL.ATTACHED.ENCL.-2
C
Nonestab
5) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Nonestab
6) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
C
Estab
7) EMPTY FUZE B-25M TO DRG.TRD-1778 (9911357354)[99]()
Specification : EMPTY ASSY.FUZE 25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
1) Butt Assembly drg .no. 1005-000835 for Carbine 9mm[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) Device for loading & unloading of Cartridge Belts Assy()
6CH16CBCB
C
Not Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BLANK FOR CARBON NOZZAL LF 9911358750
Description : BLANK FOR CARBON NOZZAL LF 9911358750()
Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
2) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
3) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
4) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
5) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC LF 9911358194[99]()
Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
5) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-
C
Nonestab
6) DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A[63]()
Specification : DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A,DT-21.04.2003(THICKNESS:0.07MM + 0.012)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC TO DRG.NO.2-013535[62]()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856,DCNO.37271-A,DT.08.11.10.
C
Nonestab
4) CAP TO DRG NO ARM 1172 A26[62]()
Specification : CAP TO DRG. NO.ARM 1172 A26DT.24-11-79
C
Nonestab
5) CUP Y1 3[64]()
Specification : 6410120650 CUP Y1-3 -[IGNITING PRIMER MG-8] TO DESIGNER REF NO. CQA (A)/AMN/2855.DC NO.37271-A DT.08.11.10 SCANNED DT. 05.01.2011 HEIGHT SHOULD BE FROM 1.30MM TO 1.40MM OUTSIDE DIAMETER SHOULD BE 2.35MMTO 2.38MM. NOTE: - EDGES SHOULD B
C
Nonestab
6) CAP K3 2[64]()
Specification : 6410120620 CAP K3-2 [IGNITING PRIMER MG-8] TO DESIGNER REF. NO. CQA(A)/AMN/2854.DC NO.37271-A, DT.08.11.10 SCANNED ON DT.05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SH
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]()
Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]()
Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00
C
Estab
2) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]()
Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) VALVE PART NO 404038806 LF 9911358407
Description : VALVE PART NO 404038806 LF 9911358407()
Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.[99]()
Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.[99]()
Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.
C
Nonestab
2) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]()
Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982
R
Nonestab
3) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]()
Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00.
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).[70]()
Specification : AS PER DRG. NO. TEND 1692* (ICR 1576)
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.[70]()
Specification : AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF BAYONET 2A WITH SCABBARD BAYONET 1A.TO DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DRG DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED
E
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO K 4110 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS[70]()
Specification : FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DIA
C
Nonestab
2) PLUG GAS CYLINDER[79]()
Specification : PLUG GAS CYLINDER FOR RIFLE 5.56MM INSAS, DS CAT NO-1005-007749 (DC-26520-SA))
C
Nonestab
3) BLANK FOR STUD CHANGE LEVER .[79]()
Specification : BLANK FOR STUD CHANGE LEVER TO RFI SK.7017-S (DC-NILDT.12/9/2001). FOR RIFLE 5.56 MM INSAS.TP OF MATL. TO BEBLANK CARBURISED TO ACHIEVE MECHANICAL PROPERTIES OF BASICMATL.& TO ACHIEVE 400-475 HV AFTER H&T.GRAIN SIZE TO CONFORMASTM 5 TO 8 &
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FLASH ABSORBER FOR RIFLE 5.56MM INSAS (WITHOUT PHOSPHATING)[79]()
Specification : FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2F
C
Nonestab
2) BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE (GHAATAK) [70]()
Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156[99]()
Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]()
Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]()
Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL
C
Nonestab
2) BODY SUB ASSEMBLY TO SK NO.OTE/SE/010 INF/C[62]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
3) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]()
Specification : AS PER DRAWING
C
Nonestab
2) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]()
Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) Plug Representing Fuze in FC TO DRG NO M 10394[60]()
Specification : As per drg. no. M-10394
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HOUSING OG TO DRG NO. CWC/229/1[74]()
Specification : HOUSING OG TO DRG NO. CWC/229/1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) FILLING HOLE PLUG[10]()
Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 SA DC 35817-A SPECN. NO. CQA(A) 1504(E) DC 35870
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUSE T & P 213 MK 5 (M-R) (EMPTY) TO DRG. NO.ARDE 2020 DET.1. DT.7.3.90. SPECN NO ARDE/SPECN/440 AND 441.[99]()
Specification : ARDE/SPECN/440 AND 441
C
Nonestab
2) FUZE YDB-60 ASSEMBLY (EMPTY) ;DRG. NO.NAI(P) SK 284[60]()
Specification : DRG. NO.NAI(P) SK 284
C
Nonestab
3) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009[60]()
1) TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.[00]()
Specification : TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.[00]()
Specification : TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.
C
Nonestab
2) SLIDE SHOE TO OFAJ DRAWING NO FS 3024[00]()
Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.[00]()
Specification : SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN[00]()
Specification : MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF BOAT TAIL FORGING[00]()
Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Estab
2) ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT[00]()
Specification : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) TIMER ASSEMBLY TO DRG.NO. 8801 00 01 01 06 000 00 TA DT.14-12-99, SPECN. ARDE/SPECN/604/1998 .[61]()
14) CHARGE DEMOLITION NO 1, 152.4MM MK-5/L (GENERAL ARRANGEMENT) BEEHIVE, EMPTY,DRG NO IA 572/1,5 DETAILS,PART NO ITX 15 GE, SPECN NO CQA 0511[6432501000]()
Specification : CQA 0511
C
Nonestab
15) FIRING BOLT TO CQA[A] SEALED DRG.NO. 04-749-130222-04.1E[60]()
Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20
C
Nonestab
6) INSULATOR TO DRG.NO.ARDE 2078/32[99]()
Specification : SPECN ARDE/SPECN/415
C
Nonestab
7) CONNECTING SLEEVE MRCR ROCKET[60]()
Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010
C
Nonestab
8) HOUSING (EMPTY) FOR IGNITER EB-2[60]()
Specification : DRG.NO. AFK/SK-347-06
C
Nonestab
9) BOOSTER CARTG ASSY EMPTY[60]()
Specification : DRG.NO. AFK/SK-014-03 DT.27.12.12
C
Nonestab
10) BODY TO DRG.ARDE 2078/30 DT.27/8/87[99]()
Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20.
C
Nonestab
11) CONTACT TO DRG.ARDE 2078/31.27.8.87[99]()
Specification : ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 2O.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) SET OF COMPONENT FOR PYRO SQUIB OPERATOR (II 3-253-M5) CONSISTING OF 6 COMPONENTS.1) BODY 2) GASKET 3)SLEEVE-I (4) SLEEVE II (5)SPACER (6) CUP TO DRG .NO. NASK--- 1089/1 (PROV.)[6099990159]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
2) COMPONENTS FOR SQUIB PSQ-6 CONSISTING 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG.NO. PTA-L-54-01-01-103-X[6099990236]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
3) SQUIB HOLDER TO DRG. NO. AFK/SK-334-06 FOR IGNITER EB-1 DT.2-2-2006][6099991378]()
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
10) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56
Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56()
Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)
C
Estab
11) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)()
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY
Description : CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY()
Specification : CQA (A) 2348
R
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301047062E DC36160 A DT 31 08 96[00]()
Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NOZZEL TO ARDE DRG NO 1135 DET 10[00]()
Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14
3) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]()
Specification : SPECN.NO. CQA(A) 0917
C
Nonestab
4) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
C
Nonestab
5) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A
C
Nonestab
6) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]()
Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E
C
Nonestab
2) CAP TO OFAJ DRG NO FS 1160A[00]()
Specification : CAP TO OFAJ DRG.NO. FS-1160A
C
Nonestab
3) HEAD WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2936 OR LATEST AMENDED DRG AND SPECN AS ON TE DATE[00]()
Specification : HEAD (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWING NO.FS-2936 OR LATEST AMENDED DRG. AND SPECN AS ON T.E. DATE.
1) BOX S 2 MK1 WOODEN FOR 76 2 NAV AMN LF 6580255000[65]()
Specification : BOX WOOD NO. S2 MK-1 (IN) TO HOLD 3 CARTRIDGES QF 76.2MM PRACTICE SHELL WITH PLUG REPRESENTING FUZE OR PLUGGED HE/PREFRAGMENTED SHELL TO DRAWING NO.ARDE-2077 DT.19NOV10 3SHTSSHT NO.1.R.NO.1 DT.09/12/87 AND SHT NO.3 R NO.2 DT.29/05/89
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TIMBER M H C PLANKS 2255055300[22]()
Specification : TIMBER MANGO/HOLLOCK/CHAPLAS PLANKS KILN SEASONED & PRESSURE TREATED UNPLAND OR ANY OTHER SPECIES COVERED BY THE SPEC:- IND/ME/883 (f) (PROV) DC NO 3539-ME DT 24/10/98 SIZE 52MM X 152MM X 1.6M LONG
P
Nonestab
2) TIMBER PLANK 13 X 172MM X 2 5M LF 2255055301[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.
P
Nonestab
3) TIMBER PLANK 22 X 85MM X 2 5M LF 2255055302[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.
P
Nonestab
4) TIMBER PLANK 16 X 75MM X 2 5M LF 2255055303[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.
P
Nonestab
5) TIMBER PLANK 16 X 110MM X 2 5M LF 2255055304[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-369 WOODEN IA-880 ISV-165A[65]()
Specification : BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6295254902 UNIT LOAD (M.O.P. 12) FOR 155MM (BT)[62]()
Specification : UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007
C
Nonestab
2) 6295254901 UNIT LOAD (MOP) FOR SHELL 155 MM BB[62]()
Specification : UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007
C
Nonestab
3) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]()
1) 6571856109 BOX M-32A(WOOD)PT NO 548A(MINEAP1B)[65]()
Specification : SPECN.NO.IA 948(AK)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570963298 BOX S 9 WOOD FOR 140MM HE ROCKET[65]()
Specification : BOX S-9 WOOD TO HOLD-2, 140MM HE FRAGMENTATION ROTARY ROCKET PLGD DRAWING NUMBER NAI(V)-5502(P).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113903 PACKING BOX WOODEN[65]()
Specification : PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
2) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 2270528358 PLY WOOD 8 MM[22]()
Specification : IS: 303-1989
R
Nonestab
3) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()
Specification : IND/ME/883 (F) (PROV)
R
Nonestab
4) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
5) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()
Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Case HEMK-I (Modified)L/A wood()
Drg.No.IND/ME/29
R
Estab.
2) Box C-26A wood()
Drg.No CIA/AMMN/1773&Specn.IA-948(a,f)
R
Not Estab.
3) Box Cartridge LTPE()
Drg.No. OFBA/PE/12 dtd 08.05.01
R
Not Estab.
4) Crate 5 A/L wire bound for packageAmmn.79-A()
Drg.No. OFBA/CX/55 dtd 16.08.94
R
Not Estab.
5) Reel I A/L for package Ammn. 79-A()
Drg.No. OFBA/CX/54 dtd 08.04.93
R
Not Estab.
6) Unit load for 155 charge M4A2()
Drg.No. 13646-4-0&CFA Drg.No.13-S/003
R
Not Estab.
7) Wooden Box for BPC ( 5 B- 84 ) ()
DRG NO-NASK 829(P)DTD03.08.2011,OFBA/RK/422
R
Non Established
8) Wooden Box for BPC ( 4W-20 )()
DRG NO.NAI(J) 245
R
Non Established
9) Case C-128 MK-13 / L()
DRG NO.IA-1031/OFBA/RK/514 DTD 13.12.2007
R
Non Established
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PLYWOOD 6 MM (+/-6%) THICKNESS OF SIZE (8Ft X 4Ft) ()
MR GRADE, TYPE: AB, BRANDED QUALITY IS: 303(LATEST ISSUE).
C
Not Estab.
Category : P
Grade : II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX C 26 A SER[65]()
Specification : WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
2) REEL 1 A/L FOR PACKAGE AMMUNITION[65]()
Specification : REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG .NO. OFBA/CX/54 DT.8.04.93ALTERNATE METHOD, PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN. IS 303-1989 THIRD REV. REAFFIRMED-2003 STEEL FOR RIB SPECN. IS1079-1994 FIFTH REV. OR IS 513-1994
C
Nonestab
3) BOX WOOD PZM[65]()
Specification : BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX PETN RDX 1A L WOOD[65]()
Specification : BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Unit Load for 155 mm Charge 9[65]()
Specification : Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Crate 5 AL wire bound for packing ammunition 79A[65]()
Specification : CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.
R
Nonestab
2) Box Cartridge LTPE Wood[65]()
Specification : BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.
R
Nonestab
3) CASE HEMK 1 MODIFIED SER[65]()
Specification : CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.
R
Nonestab
4) PACKING BOX FOR CLC 2[65]()
Specification : PACKING BOX FOR CLC-2 AS PER HEMRLDRG.NO.HE/CAST 090 SHT NO- 1,SHT NO-2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 090 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO 7, DET NO.8,DET NO.9.
R
Nonestab
5) PACKING BOX FOR CLC 3[65]()
Specification : PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.
R
Nonestab
6) PACKING BOX FOR CLC 4[65]()
Specification : AS PER HEMRL DRG. NO. HE/CAST/092-SHT NO.1. SHT NO.2, HEMRL DRG. NO. HE/CAST/089-DET NO.1,DET NO.2, DET NO.3,DET NO.4, HEMRL DRG NO. HE/CAST 092, DET NO. 1, DET NO.2 HEMRL DRG. NO. HE/CAST 089, DET NO. 7, DET NO. 8 DET NO. 9
R
Nonestab
7) PACKING BOX FOR FLSC12[65]()
Specification : PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET
R
Nonestab
8) PACKING BOX FOR FLSC 4[65]()
Specification : PACKING BOX FOR FLSC-4, AS PER DRG. NO. HEMRL DRG HE/CAST/081-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4, DET NO.5, DET NO.6, DET NO.7, DET NO.8 & DET NO.9.
R
Nonestab
9) Unit load 155 Charges M4A2[40]()
Specification : Unit load 155 Charges M4A2 to DRG. NO. 13646-4-0 DC NO. 35707-A AS PER CFA DRG. NO. 13-/003, 13-S/003/1,13-S/003/2,13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6
R
Nonestab
10) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
11) WOODEN BOX FOR BPC 4W 20[65]()
Specification : WOODEN BOX FOR PROP BPC (4W-20) AS PER DRAWING ATTACHED SPECIFICATION –DRG.NO.-NAI(J) 245
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) WOODEN PACKING BOX FOR 100-120 KG AERIAL BOMB.[14]()
Specification : WOODEN PACKING BOX FOR 100-120 KG AERIAL BOMB.
WOODEN PACKING BOX TO DRG NO. KHPK-410026(AMENDED),
GIF-SK-2257 FOR 100-120 KG AERIAL BOMB
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773600 PACKING BOX FOR HDC-1[65]()
Specification : PACKING BOX FOR HDC-1 TO DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12)
C
Nonestab
2) 6576773601 PACKING BOX FOR HDC-2[65]()
Specification : PACKING BOX FOR HDC-2 TO DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE
Specification : AMMUNITION CONTAINER BOX M-104 MK-1 (STEEL) DES.REF.DD(L) 11325(SHEET-1& 2), DRG. PART NO.SV-22A DC 35994-A DT.12.8.95
C
Nonestab
4) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
5) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
6) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) AMMN. CONTAINER BOX M 41A (WOOD)
Description : AMMN. CONTAINER BOX M 41A (WOOD)()
Specification : DRG.PT.NO.ISV 587 A, DC.37127-A DT.30.07.07.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) BOX-UNIT LOAD FOR 155MM SHELL M107
Description : BOX-UNIT LOAD FOR 155MM SHELL M107()
Specification : DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) Wooden Packing Box for Warhead as per Drg No FS 2435 C[00]()
Specification : Wooden Packing Box for Warhead as per Drg. No. FS-2435 C
E
Nonestab
2) Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C[00]()
Specification : Wooden Packing Box for Propulsion Unit as per Drg. No. FS-2436 C
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
Specification : CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED W
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.
Specification : PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.
R
Nonestab
7) TIMBER M/H/C/CHIK/CHIR 19X94X1.5 M (2255548310)[22]()
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG
R
Nonestab
Category : p
Grade : Grade III
Size :
S
708
MICROFINE BUSHINGS PRIVATE LTD
107, SIDCO INDUSTRIAL ESTATE 2ND LANE, PATTARAVAKKAM RLY STN RD CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 26250432
GSTIN : 33AACCM1179M1ZC
4) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
5) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
6) BIPOD ASSY OF LMG BELT FED[70]()
Specification : BIPOD ASSY OF LMG 7.62MM BELT FED as per drawing No.
1804 01 08 00 00 000 00DA
C
Nonestab
7) Pin Recoil Plate For Revolver Side Swing[70]()
Specification : Pin Recoil Plate For Revolver 0.32 Side Swing DRG. NO. RV-03/7 SW.
C
Nonestab
8) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Nonestab
9) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
10) Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA[70]()
Specification : Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA
C
Nonestab
11) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()
12) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FORJVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-04-02-14-000-00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
2) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MTG TRIPOD 7.62MM MGL 4A1[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FRAME TRIGGER DS CAT NO. 1005-006602[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]()
Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Upper Feed Mechanism Slide 1005-006823[70]()
Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
C
Nonestab
2) TRIGGER MECHANISM ASSEMBLY FOR LMG[70]()
Specification : TRIGGER MECHANISM ASSEMBLY FOR LMG 7.62 MM BELT FED DRG. NO. 1804 01 01 02 00 000 00DA.
C
Nonestab
3) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BRACKET DRG NO 9 A 621 02 002[91]()
Specification : FABRICATION OF BRACKET DRG. NO. 9-A-621.02.002 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
2) FABRICATION OF CASING DRG NO AO 18 02 001[91]()
Specification : FABRICATION OF CASING DRG NO. AO-18.02.001 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
3) Complete machining of remover 9 A 62109 001 from input material IC 7299000234 to be supplied by GSF IC 9140701109[91]()
Specification : Complete machining of remover (9-A-621.09.001) from input material I/C- 7299000234 to be supplied by GSF (I/C-9140701109)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
3) SPADE GRIP ASSEMBLY WITH SAFETY[74]()
Specification : SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN
E
Nonestab
4) BOLT ASSEMBLY[74]()
Specification : BOLT ASSEMBLY, BREECH OOW50BMG AS PER DRG NO: 6528322 OF M2HB GUN
E
Nonestab
5) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
6) Buffer Recoil Assembly[74]()
Specification : BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN
E
Nonestab
7) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
8) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
9) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHAFT MOTOR[74]()
Specification : SHAFT MOTOR Drg.No. 074305A-00
C
Nonestab
2) CASING MOTOR[74]()
Specification : CASING,MOTOR Drg.No. 074257B-02
C
Nonestab
3) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()
Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025
C
Nonestab
4) SPADE GRIP ASSEMBLY WITH SAFETY[74]()
Specification : SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN
E
Nonestab
5) SHAFT SPLINE ELEVATION[74]()
Specification : SHAFT SPLINE, ELEVATION AS PER DRG 062815A-00 FOR ELEVATION ASSY OF SRCG.
C
Nonestab
6) SHAFT ELEVATION[74]()
Specification : SHAFT ELEVATION AS PER DRG 062817A-01 FOR ELEVATION ASSY OF SRCG.
R
Nonestab
7) ADAPTOR MAGAZINE[74]()
Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
8) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) MAGAZINE BOX ASSY[74]()
Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG
C
Nonestab
10) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
11) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
2) Buffer Recoil Assembly[74]()
Specification : BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN
E
Nonestab
3) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
4) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
5) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
6) BOLT CENTERING[74]()
Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
7) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
8) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
9) INSERT M4 ALTERED ITEM[74]()
Specification : INSERT M4, ALTERED ITEM (View)AS PER DRG 031682A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
10) BOLT GEAR TRAVERSE[74]()
Specification : BOLT GEAR, TRAVERSE (View)AS PER DRG 031669A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
11) BELLEVILLE LEVER TRAVERSE[74]()
Specification : BELLEVILLE, LEVER TRAVERSE (View)AS PER DRG 062346A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
12) BASE STOP B[74]()
Specification : BASE STOP B (View)AS PER DRG 019895A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
13) SCREW SPRING INTERFACE[74]()
Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
14) Rear Sight Assembly OOW50BMG as per Drawing No 12003047 of M2HB GUN[74]()
Specification : Rear Sight Assembly, OOW50BMG as per Drawing No.: 12003047 of M2HB GUN
C
Nonestab
15) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
16) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE TO DRG NO CTM 166[70]()
Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C
C
Nonestab
2) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]()
Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981()
Specification : COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) KEY[74]()
Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) COVER SOLENOID 1[74]()
Specification : COVER SOLENOID 1 (VIEW) AS PER DRG NO.065281A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
3) SCREW HEAD COCKING[74]()
Specification : SCREW HEAD COCKING AS PER DRG NO.066628A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
4) GUIDE RECOIL REAR[74]()
Specification : GUIDE RECOIL, REAR AS PER DRG NO.063796A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
5) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
6) COVER SOLENOID 2[74]()
Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG
C
Nonestab
7) KEY AS PER DRG NO 074811A 00[74]()
Specification : KEY (View) AS PER DRG NO.074811A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
8) COVER FRONT PEDESTAL[74]()
Specification : COVER FRONT PEDESTAL AS PER.Y25684A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) ARM COVER LEFT[74]()
Specification : ARM COVER LEFT (View) AS PER.Y25685A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
10) ARM COVER RIGHT[74]()
Specification : ARM COVER RIGHT (View) AS PER.DGRNO.Y25686A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
11) BRACKET TOP COVER[74]()
Specification : BRACKET TOP COVER (View) AS PER.DRG.NO.Y25687A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
12) BRACKET BASKET RIGHT WELD[74]()
Specification : BRACKET, BASKET,RIGHT, WELD/Y19378A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) BRACKET BASKET LEFT WELD[74]()
Specification : BRACKET, BASKET, LEFT, WELD/Y19376A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
14) CASE DESICCANT[74]()
Specification : CASE, DESICCANT/Y17736A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
2) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
3) SHAFT ENCODER CASING[74]()
Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
4) BUMPER ARM[74]()
Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
5) BUMPER ARM LOCK[74]()
Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
6) BLOCKING ELEMENT[74]()
Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
7) BRACKET ASSY 1[74]()
Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG
C
Nonestab
8) SECTOR BACK COVER FNSH[74]()
Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
9) SECTOR FRONT COVER FNSH[74]()
Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
10) ADAPTOR SPRING[74]()
Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG
C
Nonestab
11) LIMITER EXTERNAL[74]()
Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
12) WASHER FLAT CRES M5 A4[74]()
Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) SUPPORT ELEVATION DRIVE[74]()
Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
14) BOLT GEAR ELEVATION[74]()
Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
15) BRACKET ASSY2[74]()
Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG
C
Nonestab
16) SPACER OIL RETAINER[74]()
Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
17) SUPPORT GEAR TRAVERSE[74]()
Specification : SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
18) ANGLE LIMITER RIGHT[74]()
Specification : ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
19) ANGLE LIMITER LEFT[74]()
Specification : ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
20) BASE STOP A[74]()
Specification : BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
21) COVER SHAFT ENCODER[74]()
Specification : COVER SHAFT ENCODER/ DRG NO.Y25635A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
2) PISTON INNER[74]()
Specification : PISTON INNER (View) AS PER DRG NO.074263A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) COVER MOTOR[74]()
Specification : COVER, MOTOR AS PER DRG NO.Y18725A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) SPACER ROTOR[74]()
Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) STOPPER[74]()
Specification : STOPPER (View) AS PER DRG NO.074266A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
6) NUT[74]()
Specification : NUT (View) AS PER DRG NO.074267A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
7) WASHER SAFETY[74]()
Specification : WASHER SAFETY (View) AS PER DRG NO.074265A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
8) NUT SOLENOID[74]()
Specification : NUT SOLENOID AS PER DRG NO.065454A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
9) Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun[74]()
Specification : Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun
C
Nonestab
10) Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun[74]()
Specification : Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun
C
Nonestab
11) Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun[74]()
Specification : Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun
C
Nonestab
12) Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun[74]()
Specification : Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun
C
Nonestab
13) Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun[74]()
Specification : Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun
C
Nonestab
14) Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun[74]()
Specification : Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun
C
Nonestab
15) Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun[74]()
Specification : Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun
C
Nonestab
16) Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun[74]()
Specification : Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun
C
Nonestab
17) Screw OOW50BMG as per Drg No 13018132 of M2HB Gun[74]()
Specification : Screw OOW50BMG as per Drg No 13018132 of M2HB Gun
C
Nonestab
18) Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun[74]()
Specification : Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun
C
Nonestab
19) Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun
C
Nonestab
20) Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun[74]()
Specification : Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun
C
Nonestab
2) Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun[74]()
Specification : Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun
C
Nonestab
3) Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun[74]()
Specification : Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun
C
Nonestab
4) Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun[74]()
Specification : Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun
C
Nonestab
5) Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun[74]()
Specification : Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun
C
Nonestab
6) Slide Sear OOW50BMG as per Drg No 5351220 of M2HB Gun[74]()
Specification : Slide Sear OOW50BMG as per Drg No 5351220 of M2HB Gun
C
Nonestab
7) Sear OOW50BMG as per Drg No 5504067 of M2HB Gun[74]()
Specification : Sear OOW50BMG as per Drg No 5504067 of M2HB Gun
C
Nonestab
8) Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun[74]()
Specification : Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun
C
Nonestab
9) Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun[74]()
Specification : Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) WASHER ELASTOMER[74]()
Specification : WASHER ELASTOMER (View) AS PER DRG NO.Y01876A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) HOUSING CONNECTOR[74]()
Specification : HOUSING CONNECTOR(VIEW) AS PER DRG NO.074253A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) CAP ASSY[74]()
Specification : CAP ASSY (VIEW) AS PER DRG NO.Y18784A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) SPINDLE ALTERED[74]()
Specification : SPINDLE, ALTERED (View) AS PER DRG NO.074260A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) SCREW M10[74]()
Specification : SCREW M10 (View) AS PER DRG NO.075871A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
6) BRACKET[74]()
Specification : BRACKET AS PER DRG NO.Y17473A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
7) SCREW SHANK[74]()
Specification : SCREW SHANK, AS PER DRG NO.Y00964A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
8) BUSHING GUIDE FRONT[74]()
Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
9) BUSHING THREAD REAR[74]()
Specification : BUSHING THREAD REAR 1 (View) AS PER DRG NO.077853A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
10) BASE LIMITER[74]()
Specification : BASE LIMITER AS PER DRG NO.Y17478A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
11) ROD LIMITER[74]()
Specification : ROD LIMITER (View) AS PER DRG NO.066426A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
12) PLUG SPRING[74]()
Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
13) BODY EXTERNAL WELDED[74]()
Specification : BODY EXTERNAL WELDED (VIEW)064706A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
14) LEVER TRIGGER[74]()
Specification : LEVER TRIGGER (View) AS PER DRG NO.Y03740A-00 FOR STAND WEAPON ASSY OF SRCG
R
Nonestab
15) HEAD COCKING 1[74]()
Specification : HEAD COCKING 1(VIEW) AS PER DRG NO.066237A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INLET ASSY[74]()
Specification : INLET ASSY (View) AS PER DRG.080780A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPACER[74]()
Specification : SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) SPRING FLAT[74]()
Specification : SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
3) WRENCH[74]()
Specification : WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
4) SLIDER LINKS M9 WELDMENT[74]()
Specification : SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
C
Nonestab
5) WASHER LOCK TAB M4[74]()
Specification : WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
6) BLOCK STORAGE WELDED[74]()
Specification : BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
2) SPACER BEARING[74]()
Specification : SPACER BEARING (View)074311A-00 FOR COCKING MECH. ASSY OF SRCG..
C
Nonestab
3) EXTENSION SOLENOID[74]()
Specification : EXTENSION SOLENOID/Y17398A-00 FOR SOLENOID SHOT ASSY OF SRCG..
C
Nonestab
4) BUSHING THREAD FRONT 1[74]()
Specification : BUSHING THREAD FRONT 1 (View)077851A-00 FOR CRADLE WEAPON ASSY OF
SRCG.
C
Nonestab
5) BUSHING REAR[74]()
Specification : BUSHING, REAR/Y18946A-00 FOR CRADLE WEAPON ASSY OF SRCG.
C
Nonestab
6) BUSHING FRONT 1[74]()
Specification : BUSHING FRONT 1 (View)077855A-00 FOR CRADLE WEAPON ASSY OF SRCG.
C
Nonestab
7) PIN KEY[74]()
Specification : PIN KEY (View)066425A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
8) SLEEVE LIMITER[74]()
Specification : SLEEVE LIMITER (View)066427A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
9) BASE BLOCK[74]()
Specification : BASE BLOCK/065286A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
10) PUSHER TRIGGER[74]()
Specification : PUSHER TRIGGER (View)Y05288A-01 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
11) BUSHING PIN[74]()
Specification : BUSHING PIN/065453A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
12) SCREW SPECIAL[74]()
Specification : SCREW SPECIAL/065603A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
13) AXIS 1[74]()
Specification : AXIS 1/065289A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Block Gas to ICR 1322 with OFT material[70]()
Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CLAMP TO 6201080003[62]()
Specification : CLAMP TO DRG NO. 172.80.001CB-ACB
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
2) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE[00]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE
C
Nonestab
3) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL
C
Nonestab
4) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
5) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
7) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
8) MACHINING MILLING AND GRINDING OF ANTI REBOUND C1048 TO DRG NO TEND 2174 STAR WITH FIRMS MATERIAL[70]()
Specification : As per TE
C
Nonestab
9) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA
C
Nonestab
2) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
4) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
5) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
2) Barrel Mount for 9X19 mm Machine Pistol[70]()
Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing
R
Nonestab
3) Wheel Rear Sight for 9X19 mm Machine Pistol[70]()
Specification : Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA
C
Nonestab
4) Locking Rear Block for 9X19 mm Machine Pistol[70]()
Specification : Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
C
Nonestab
5) RECEIVER FOR LMG BELT FED[70]()
Specification : RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
C
Nonestab
6) Rear sight for 9X19 mm Machine Pistol[70]()
Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA
C
Nonestab
7) Housing Fore Sight for 9X19 mm Machine Pistol[70]()
Specification : Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Bracket Bipod drg no 1005 000061 for LMG 5 56mm[70]()
Specification : AS PER DRG.
C
Nonestab
2) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
C
Nonestab
3) BLOCK GAS IN FINISH CONDITION FOR MAG[70]()
Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
7) Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 003 00DA[70]()
Specification : Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 003 00DA
C
Nonestab
8) RECEIVER FOR GPMG WITHOUT HEATTREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) C1054 SLIDER FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) SUPPORT TO DRG NO C1062 WITH FIRM MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) C1091 BRACKET FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
4) C1097 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
5) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
2) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
3) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073200282 MACHINING OF T 90 CRADLE TO DRG NO GCF 20A SK 885 SHT 1 TO 6 AS PER QAP SCOPE OF WORK[90]()
Specification : MACHINING OF T-90 CRADLE TO DRG.NO.GCF-20A-SK-885,SHT 1 TO 6 AS PER QAP & SCOPE OF WORK.
C
Nonestab
Category :
Grade : Grade III
Size :
M
710
Eastern Global Limited
517, City Centre, The Mall, Kanpur UP
PIN1 : 208001
Phone No. : 0512-2330149, 2330156, 2330162, 3241055, 9839257707
GSTIN : 09AAACE4867G1ZH
1) SUPPLY OF SLING ASSY TO DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )[70]()
Specification : AS PER DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SLING ASSY TO DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )[70]()
Specification : AS PER DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
2) SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
2) SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPTA BAG[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPTA BAG[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BRUSH CLEANING 7POINT62mm CHAMBER GAS CYLINDER 1A D S CAT No 1005 000715 D C No 17850 SA DATED 12 04 1984[70]()
Specification : AS PER D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BRUSH CLEANING 7POINT62mm CHAMBER GAS CYLINDER 1A D S CAT No 1005 000715 D C No 17850 SA DATED 12 04 1984[70]()
Specification : AS PER D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Sling Assembly for 7POINT62mm Rifle[70]()
Specification : As per Drawing
C
Nonestab
2) JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9023
WITH FIRMS MATERIAL
E
Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) BRUSH CLEANING RIFLE MARK 1 L DS CAT NO 1005 001120 DC NO 26087 SA DT 11 07 05 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
E
Nonestab
5) Slush Brush[70]()
Specification : as per Drg. No.: K-9009 with Firm’s Material
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Sling Assembly for 7POINT62mm Rifle[70]()
Specification : As per Drawing
C
Nonestab
2) JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9023
WITH FIRMS MATERIAL
E
Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) BRUSH CLEANING RIFLE MARK 1 L DS CAT NO 1005 001120 DC NO 26087 SA DT 11 07 05 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
E
Nonestab
5) Slush Brush[70]()
Specification : as per Drg. No.: K-9009 with Firm’s Material
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CLOSING CUP FOR 120 MM ILLG.[99]()
Specification : DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT. 06-12-89. TOTAL THICKNESS TO BE 18.0 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CLOSING CUP FOR 120 MM ILLG.[99]()
Specification : DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT. 06-12-89. TOTAL THICKNESS TO BE 18.0 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER 63 A[65]()
Specification : SPECN. NO. CQA(A) 2805 (H) DC-36145-A [DRG. NO. CIA/AMN/2174 PART NO. ISV 506A DC 36166-A]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER 63 A[65]()
Specification : SPECN. NO. CQA(A) 2805 (H) DC-36145-A [DRG. NO. CIA/AMN/2174 PART NO. ISV 506A DC 36166-A]
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CUP FOR BOMB 51MM ILLG.[62]()
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]()
Specification : AS PER CQA(A) SPECN.
C
Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]()
Specification : CQA(A)2804
C
Nonestab
3) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]()
Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A
C
Nonestab
4) CONTAINER (FOR C.E PELLET)[60]()
Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033
C
Nonestab
5) CHARGE HOLDER TO DRG.NO.KF/SK-1746[60]()
Specification : DGOF 135
C
Nonestab
6) CONTAINER NO.P-14 TO HOLD CARTGS[60]()
Specification : CQA(A) 2804
C
Nonestab
7) CONTAINER 47B DES REF CIA/AMN/2483[65]()
Specification : CQA(A) 2804
C
Nonestab
8) CONTAINER FOR BOOSTER CHARGE[60]()
Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]()
Specification : AS PER CQA(A) SPECN.
C
Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]()
Specification : CQA(A)2804
C
Nonestab
3) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]()
Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A
C
Nonestab
4) CONTAINER (FOR C.E PELLET)[60]()
Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033
C
Nonestab
5) CHARGE HOLDER TO DRG.NO.KF/SK-1746[60]()
Specification : DGOF 135
C
Nonestab
6) CONTAINER NO.P-14 TO HOLD CARTGS[60]()
Specification : CQA(A) 2804
C
Nonestab
7) CONTAINER 47B DES REF CIA/AMN/2483[65]()
Specification : CQA(A) 2804
C
Nonestab
8) CONTAINER FOR BOOSTER CHARGE[60]()
Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) COLLAR NOSE DRG ARDE 2233 DET NO.1[6040541052]()
Specification : DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942
Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50
C
Nonestab
7) BASE CAP (BLACK) FOR PROJECTILE[60]()
Specification : DRG. NO. AFK/PJ/SK-62/1
C
Nonestab
8) BASE CAP DRGN0 KF/PJ/SK-14DT22.8.85[60]()
Specification : CQA[A] SEALED DRG NO -04-749-130222-01-4E
C
Nonestab
Category : p
Grade : Grade III
Size :
S
712
Central Institute of Plastics Engineering & Technology
T.V.K. Industrial Estate, Chennai, Tamil Nadu
PIN1 : 600032
Phone No. : 044-22254707
GSTIN : 06AAAAC0606R1ZT
3) FEMALE CAP (PUSH FIT) AS PER O.E.F.C. DRG.NO. SK - 914()
AS PER REQUIREMENT & SPECIFICATION
R
Category : P
Grade : II
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PLASTIC CONTAINER FOR AMK339 AS PER HAPP DRAWING NO.H AMK 125 1 126 REV 0[14]()
Specification : HIGH DENSITY POLYTHENE TO SPEC JSS 9330-03:2007(TYPE 2) IN ORANGE COLOUR, (GASKET)-NEOPRENE RUBBER TO SPEC IND/ME/884 (PROV), (CUSHION PAD BOTTOM & TOP)-SPONGE RUBBER TO SPEC IND/ME/645 (PROV)
E
Nonestab
Category : p
Grade : Grade I
Size :
M
713
Vinay Traders
Julius Arc, Near Sadoday Palace, Gaddi godam, kamptee road, Nagpur Maharashtra
PIN1 : 440001
Phone No. : 2548366
6) RING I.R.BUNG AS PER DRG.NO.MS.SK 11098/1 DATED 10.2.54 SPECIFICATION :-MD.I,MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII.[20]()
Specification : MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII.
C
Nonestab
7) RUBBER RING TO DRG NO ARDE/2165 DETAIL 5 DT.28-9-92, SPECN. ARDE/SPECN/423[60]()
Specification : ARDE/SPECN/423
C
Nonestab
8) SEALING RING TO DRG. NO. ARDE/1508 DET 7 DT 3-11-77. SPECN. ARDE/SPECN/221[60]()
Specification : ARDE/SPECN/221
C
Nonestab
9) RUBBER RING DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015[60]()
Specification : DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015
R
Nonestab
10) SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 (b): 2014 DC:5282 -ME TYPE B SIZE 914.4 MM WIDE X 8 MM THICK[10]()
Specification : IND/ME/645
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 'O' RING 78X2 (2013436144)[20]()
Specification : 'O' RING 78X2 (2013436144)
E
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING FOR COPPER BAND TO DRG. NO. SK-8337/A()
Specification : PROTECTIVE RING FOR COPPER BAND TO DRG. NO. SK-8337/A required for Mfr. of 105mm IFG Colour Smoke BE 3A, 105mm IFG SMK BE 3A(E) and 105mm IFG HE.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM()
Specification : PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B
Description : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B()
Specification : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING 66 POINT 7 BY 1 POINT 2 TO OFAJ DRG NO FS2773B
Description : O RING 66 POINT 7 BY 1 POINT 2 TO OFAJ DRG NO FS2773B()
Specification : O RING 66.7 X 1.2 TO OFAJ DRG.NO.FS-2773B
C
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.[00]()
Specification : O RING-1
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]()
Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.[00]()
Specification : O RING-1
C
Estab
Category : ddp
Grade : Grade III
Size :
S
716
NATIONAL PHYSICAL LABORATORY , CSIR
Dr.KRISHNAN MARG COUNCIL OF SCIENTIFIC & INDUSTRIAL RESEARCH NEW DELHI NEWDELHI
PIN1 : 110012
Phone No. : 011-45608610, 011-45609212
GSTIN : 20AAATC2716R1ZT
1) CALIBRATIOPN OF BOW DYNAMO METER UTM[CAPACITY UP TO 100KN OF UTM]()
CAPACITY UP TO 100KN OF UTM
E
ESTAB
2) DENSITY CALIBRATION OF HA BLANKS[STANDARD BLANKOF DENSITY 18.10GM / CC]()
STANDARD BLANKOF DENSITY 18.10GM / CC
E
ESTAB
3) ULTROSONIC CALIBRATION OF HA BLANK[DENSITY 18.10GM /CC]()
DENSITY 18.10GM /CC
E
ESTABLISHED
Category : S
Grade : I
Size :
O
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL
Description : FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL()
Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL
C
Estab
Category : ddp
Grade : 3
Size :
L
717
R V INDUSTRIALS
SF NO.:616/1E, CHETTIPALAYAM ROAD, EACHANARI POST, COIMBATORE, TAMIL NADU
PIN1 : 641021
Phone No. : 0422-2974641, 9842216641
GSTIN : 33AACFR3326A1ZX
