List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
801 MANGLAM SAFPACK INDUSTRIES
Behind Kamla Hospital, Khasra No. 6-8, PATUDI ROAD, GURGAON, GURGAON Haryana
PIN1 : 122001
Phone No. : 9560780332
GSTIN : 06AKZPG9191P1ZY 		AKZPG9191P

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) POLYTHENE BAGS SIZE 90 CMS X 75 CMS MADE FROM 0.04 MM THICKNESS[2510025001]() Specification : SPECIFICATION NO. : CQA(GS)/SS/540 & IS: 2508-1984 R Nonestab
Category :
Grade : Grade III
Size : S
802 M.I.S Engineering Co.
J.R. INDUSTRIAL ESTATE, RASAPUNJA, 24 SOUTH PARAGANAS BAKHRAHAT ROAD kolkata West Bengal
PIN1 : 700104
Phone No. : 24030618
GSTIN : 19BARPS3104H1ZF 		CALK05353F

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.[44]() Specification : STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Metal and Steel Factory
Name Specification Use Status
1) M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . [20]() Specification : "M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . " C Nonestab
Category : p
Grade : Grade III
Size : S
1) Metal and Steel Factory
Name Specification Use Status
1) COLD ROLLED STEEL STRIP 2.2(+/-0.1) MM THICK X 90(+/-2) MM WIDE X 1000 MM LONG TO SPECN IS:1570-79 GRADE:40 C8, TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.[01]() Specification : COLD ROLLED STEEL STRIP 2.2(+/-0.1) MM THICK X 90(+/-2) MM WIDE X 1000 MM LONG TO SPECN IS:1570-79 GRADE:40 C8, TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS. C Nonestab
Category : p
Grade : Grade III
Size : S
803 S. S. UDYOG
HOWRAH-AMTA ROAD (Near - INDIRAPALLI, Beside - SBI), P.O. - BANKRA, P. S. - DOMJUR HOWRAH-AMTA ROAD HOWRAH West Bengal
PIN1 : 711403
Phone No. : 26534326
GSTIN : 19ALAPS2127H1Z5 		CALG05699B

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . [20]() Specification : "M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . " S Nonestab
Category : p
Grade : Grade III
Size : S
1) Metal and Steel Factory
Name Specification Use Status
1) CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169[20]() Specification : CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169 C Nonestab
Category : p
Grade : Grade III
Size : S
804 VP Enterprises
Sr. No. 54/1/2, VP Heights, Opp Smt. Kashibai Navale Medical College & General Hosptal, Manajinagar, Narhe, Pune - 411041 Narhe Pune Maharashtra
PIN1 : 411041
Phone No. : 9689916017
GSTIN : 27ADNPK2179G1ZA 		PNEM09262B

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
805 SONI ROLLERS PVT. LTD.
4, Princep Street Princep Street KOLKATA West Bengal
PIN1 : 700072
Phone No. : 9051037436
GSTIN : 19AAKCS5859A1Z2 		CALS18961F

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) HARD CHROMIUM PLATING FOR KAVACH BARREL POLISHING CHARGES BEFORE AND AFTER HARD CHROMIUM PLATING INCLUSIVE[91]() Specification : HARD CHROMIUM PLATING FOR "KAVACH" BARREL ( POLISHING CHARGES BEFORE AND AFTER HARD CHROMIUM PLATING INCLUSIVE) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HARD CHROMIUM PLATING ON BARREL FOR AK-630 GUN TO DRG. NO AO-18.01.018[91]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BLANK FOR DISTANCE TUBE TO OFAJ DRG NO CC 533 C[62]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
806 PARAGON AUTOTECH PRODUCTS P LTD
E1161 PHASE4 RIICO IND AREA RIICO IND AREA BHIWADI Rajasthan
PIN1 : 301019
Phone No. : 7665567880 		JPRP01706F

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RUBBERISING OF METALLIC PIN [20]() Specification : AS PER OFM SPECIFICATION C Estab
Category : p
Grade : Grade I
Size : S
807 V K RUBPLAST INDIA PVT LTD
B - 36 , 37 and 38 , IDC MG ROAD GURGAON Haryana
PIN1 : 122001
Phone No. : 4383696 		123456789A

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RUBBERISING OF METTALIC PIN(2015489041)[20]() Specification : RUBBERISING OF METALLIC PIN (DRG. NO.OFM-32842A) ALONG WITH TA CONTACT WIRE (DRG.NO.OFM-32838) AS PER SPECIFICATION NO.OFM/TDS/TECH/06B AND COMPLETE ASSEMBLY DRG.NO.OFM-32853 & OFM-32854. C Estab
Category : p
Grade : Grade I
Size : S
808 APPL Defence and Telecommunications Pvt. Ltd.
S.No 279/1 2, APPL INDUSTRIES LIMITED, RAISONI INDUSTRIAL ESTATE HINJEWADI PHASE II MAAN MULSHI, Pune, Pune, Maharashtra, 411057 Hinjawadi Phase 2 Pune Maharashtra
PIN1 : 411057
Phone No. : 22939180
GSTIN : 27AARCA3650N1Z4 		PNEA28728A

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) PLASTIC MOULDING BOX FOR 5.56MM ASSAULT RIFLE & GHAATAK.[70]() Specification : MATERIAL:-SEE NOTE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) RFI SK-9118-GG, MOTHER BOX FOR PACKING OF 05 NOS OF SINGLE WEAPON PACKING OF TEAR GAS GUN.[70]() Specification : RFI SK-9118-GG, MOTHER BOX FOR PACKING OF 05 NOS OF SINGLE WEAPON PACKING OF TEAR GAS GUN. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) RIFLE BOX FOR 7.62MM SNIPER RIFLE ODC/RFI SK. NO-0064[70]() Specification : RIFLE BOX FOR 7.62MM SNIPER RIFLE ODC/RFI SK. NO-0064 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) RFI SK-9118-GG, MOTHER BOX FOR PACKING OF 05 NOS. OF SINGLEWEAPON PACKING OF TEAR GAS GUN.[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) CPP HOLLOW CORRUGATED BOX TO HOLD 5 NOS RIFLE[70]() Specification : CPP HOLLOW CORRUGATED BOX TO DRG. NO. RFI SK. NO.6431*4(TO HOLD 5 NOS.RIFLE)FOR 30-06,0.22" ,.315" SPORTING RIFLE & 12 BORE PAG C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) RIFLE BOX SMALL[70]() Specification : RIFLE BOX SMALL TO DRG. NO. RFI NO. 10368 FOR 7.62X51 MM SNIPER RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BOX FOR 10 NOS OF GHAATAK[70]() Specification : BOX FOR 10 NOS OF GHAATAK RIFLE TO DRG NO. RFI SK NO. 10393 FOR 7.62 ASSAULT RIFLE GHAATAK C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) RFI SK 9118 GG MOTHER BOX FOR PACKING OF 05 NOS OF SINGLE WEAPON PACKING OF TEAR GAS GUN[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
809 Bajrang Foams Pvt. Ltd.
F-10B, Panki Industrial Area, Site-2, Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 0512-2691401, Fax No.: 0512-2500188, Mob. No.: 09936102260
GSTIN : 09AAACB5954F1ZO 		AAACB5954F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) LATEX FOAM VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
2) FOAM VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : II
Size : S
810 DULAR STEEL PRODUCTS
116, INDUSTRIAL ESTATE NUNHAI AGRA Uttar Pradesh
PIN1 : 282006
Phone No. : 2281701
GSTIN : 09AAQPV5711P1ZP 		AGRR13548D

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL BALL 3 5 200 IS 4398 FUZE 30MM LF 9911350208 Description : STEEL BALL 3 5 200 IS 4398 FUZE 30MM LF 9911350208() Specification : STEEL BALL __3.5-200, TO MATERIAL SPECN:-IS-4398:1994 (2nd REVISION) GRADE 104 Cr6 REAFFIRMED DEC-98 AMDT NO.1 JULY 1999TO DRG NO.CQA(A)/Amn./2970 DC 37271-A DT 08/11/2010. R Nonestab
2) steel ball LF 9911356820 Description : steel ball LF 9911356820() Specification : steel ball to drg no. NAI(j) R Nonestab
Category : p
Grade : 3
Size : S
811 INDIAN RUBBER MANUFACTURERS RESEARCH ASSOCIATION
254/1 B, Rd Number 16U Wagle Industrial Estate, Thane West Thane Maharashtra
PIN1 : 400604
Phone No. : 67873200
GSTIN : 27AAAAT7089F1Z6 		PNEI04299B

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RUBBERISING OF METTALIC PIN(2015489041)[20]() Specification : RUBBERISING OF METALLIC PIN (DRG. NO.OFM-32842A) ALONG WITH TA CONTACT WIRE (DRG.NO.OFM-32838) AS PER SPECIFICATION NO.OFM/TDS/TECH/06B AND COMPLETE ASSEMBLY DRG.NO.OFM-32853 & OFM-32854. C Estab
Category : p
Grade : Grade I
Size : M
812 DELPHI-TVS TECHNOLOGIES LIMITED
11-13, PATULOS ROAD, CHENNAI CHENNAI Tamil Nadu
PIN1 : 600002
Phone No. : 27659135
GSTIN : 33AAACL1019K1ZW 		AAACL1019K

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP HK 12M[62]() Specification : FUEL PUMP HK 12M TO DRG NO. SB 327-00-73 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : L
813 RFM AUTOMOTIVES PVT LTD
MUSTTI NO 94, KILLA NO 22/2, BINOLA INDUSTRIAL AREA, BHORA KALAN, GURGAON BINOLA GURGAON Haryana
PIN1 : 122413
Phone No. : 8960380270
GSTIN : 06AAGCR8498G1ZT 		RTKR09056F

Download 		1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Nonestab
Category :
Grade : Grade III
Size : S
814 SUNTOOLS
UNSANI KACHARI PARA, HOWRAH-713302 NASKAR PARA BYE LANE HOWRAH West Bengal
PIN1 : 700104
Phone No. : 26694243
GSTIN : 19AAHFM4680R1ZD 		AAHFM4680R

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) MAGAZINE ASSY FOR ASHANI MK III IN FC AS PER DRG NO CTM 158 C Description : MAGAZINE ASSY FOR ASHANI MK III IN FC AS PER DRG NO CTM 158 C() Specification : MAGAZINE ASSY. FOR ASHANI MK-III IN F/C AS PER DRG NO:- CTM-158 C C Estab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) MAGAZINE ASSY SS FOR YASHASVI DRG NO CTM 202 A Description : MAGAZINE ASSY SS FOR YASHASVI DRG NO CTM 202 A() Specification : MAGAZINE ASSY. (SS) FOR YASHASVI DRG. NO. CTM 202 A C Estab
Category : p
Grade : 3
Size : S
815 CREATIVE FORGE PRIVATE LIMTED
SURVEY NO 257 PLOT NO 1 TAL KOTDA SANGANI, DIST. RAJKOT AT SHAPAR VERAVAL Gujarat
PIN1 : 360024
Phone No. : 9879521101
GSTIN : 24AACCC4069N1ZG 		RKTC00697E

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. CLAMP OF TA-90 [71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Nonestab
Category : ddp
Grade : Grade II
Size : S
816 Trinity Engineers Pvt Ltd
14,D-1 Block M I D C Chinchwad,Pune Maharashtra
PIN1 : 411019
Phone No. : 39836281 		PNET00062G

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
Category : p
Grade : Grade I
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
Category : p
Grade : Grade I
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
Category : p
Grade : Grade I
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Estab
Category : p
Grade : Grade I
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Estab
Category : p
Grade : Grade I
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Estab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING OF TA GUIDE (6120100103)[61]() Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED). (OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03. C Nonestab
2) FORGING OF TA CLAMP (6120100102)[61]() Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED. C Nonestab
3) FORGING OF TA SHOE (6120100101)[61]() Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED. C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING OF TA GUIDE (6120100103)[61]() Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED). (OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03. C Nonestab
2) FORGING OF TA CLAMP (6120100102)[61]() Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED. C Nonestab
3) FORGING OF TA SHOE (6120100101)[61]() Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED. C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING OF TA GUIDE (6120100103)[61]() Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED). (OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03. C Nonestab
2) FORGING OF TA CLAMP (6120100102)[61]() Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED. C Nonestab
3) FORGING OF TA SHOE (6120100101)[61]() Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED. C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING & MACHINING OF TA GUIDE (6120100129)[61]() Specification : TA GUIDE TO DRG.NO.OFM-32845.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS /TECH/03 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO. 32845 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING & MACHINING OF TA GUIDE (6120100129)[61]() Specification : TA GUIDE TO DRG.NO.OFM-32845.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS /TECH/03 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO. 32845 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING & MACHINING OF TA GUIDE (6120100129)[61]() Specification : TA GUIDE TO DRG.NO.OFM-32845.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS /TECH/03 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO. 32845 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING & MACHINING OF TA CLAMP(6120100130)[61]() Specification : TA CLAMP TO DRG.NO.OFM-32843.COMPONENT SHALL BE MADE FROM [CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS /TECH/02 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO-32843] C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING & MACHINING OF TA CLAMP(6120100130)[61]() Specification : TA CLAMP TO DRG.NO.OFM-32843.COMPONENT SHALL BE MADE FROM [CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS /TECH/02 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO-32843] C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING & MACHINING OF TA CLAMP(6120100130)[61]() Specification : TA CLAMP TO DRG.NO.OFM-32843.COMPONENT SHALL BE MADE FROM [CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS /TECH/02 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO-32843] C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING AND MACHINING OF TA SHOE (6120100131)[61]() Specification : TA SHOE TO DRG.NO.OFM-32846.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/ TDS/TECH/01 FOLLOWED BY MECHINING OF COMPONENT AS PER DRG.NO 32846 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING AND MACHINING OF TA SHOE (6120100131)[61]() Specification : TA SHOE TO DRG.NO.OFM-32846.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/ TDS/TECH/01 FOLLOWED BY MECHINING OF COMPONENT AS PER DRG.NO 32846 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING AND MACHINING OF TA SHOE (6120100131)[61]() Specification : TA SHOE TO DRG.NO.OFM-32846.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/ TDS/TECH/01 FOLLOWED BY MECHINING OF COMPONENT AS PER DRG.NO 32846 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER[04]() Specification : 20X2H44 GOST 4543-71 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER[04]() Specification : 20X2H44 GOST 4543-71 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER[04]() Specification : 20X2H44 GOST 4543-71 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) SPIDER UNIVERSAL[04]() Specification : SPIDER UNIVERSAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) SPIDER UNIVERSAL[04]() Specification : SPIDER UNIVERSAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) SPIDER UNIVERSAL[04]() Specification : SPIDER UNIVERSAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) FORG FOR OUT PUT SHAFT REAR Description : FORG FOR OUT PUT SHAFT REAR() Specification : FORGING FOR OUTPUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2) C Estab
2) FORG FOR DRIVING SHAFT Description : FORG FOR DRIVING SHAFT() Specification : FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2) C Estab
3) FORG FOR SELECTOR PLATE Description : FORG FOR SELECTOR PLATE() Specification : FORGING FOR SELECTOR PLATE, F2437514-3 (A) C Estab
4) FORGING FOR SELECTOR PLATE Description : FORGING FOR SELECTOR PLATE() Specification : FORGING FOR SELECTOR PLATE, F-2437614-3(A) C Estab
5) FORG FOR 4th GEAR ON LAY SHAFT Description : FORG FOR 4th GEAR ON LAY SHAFT() Specification : FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3 C Estab
6) FORG FOR 5th GEAR ON LAY SHAFT Description : FORG FOR 5th GEAR ON LAY SHAFT() Specification : FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3 C Estab
7) FORG FOR CONSTANT MESH GEAR LAY SHAFT Description : FORG FOR CONSTANT MESH GEAR LAY SHAFT() Specification : FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3 C Estab
Category : p
Grade : 2
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) FORG FOR OUT PUT SHAFT REAR Description : FORG FOR OUT PUT SHAFT REAR() Specification : FORGING FOR OUTPUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2) C Estab
2) FORG FOR DRIVING SHAFT Description : FORG FOR DRIVING SHAFT() Specification : FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2) C Estab
3) FORG FOR SELECTOR PLATE Description : FORG FOR SELECTOR PLATE() Specification : FORGING FOR SELECTOR PLATE, F2437514-3 (A) C Estab
4) FORGING FOR SELECTOR PLATE Description : FORGING FOR SELECTOR PLATE() Specification : FORGING FOR SELECTOR PLATE, F-2437614-3(A) C Estab
5) FORG FOR 4th GEAR ON LAY SHAFT Description : FORG FOR 4th GEAR ON LAY SHAFT() Specification : FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3 C Estab
6) FORG FOR 5th GEAR ON LAY SHAFT Description : FORG FOR 5th GEAR ON LAY SHAFT() Specification : FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3 C Estab
7) FORG FOR CONSTANT MESH GEAR LAY SHAFT Description : FORG FOR CONSTANT MESH GEAR LAY SHAFT() Specification : FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3 C Estab
Category : p
Grade : 2
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) FORG FOR OUT PUT SHAFT REAR Description : FORG FOR OUT PUT SHAFT REAR() Specification : FORGING FOR OUTPUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2) C Estab
2) FORG FOR DRIVING SHAFT Description : FORG FOR DRIVING SHAFT() Specification : FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2) C Estab
3) FORG FOR SELECTOR PLATE Description : FORG FOR SELECTOR PLATE() Specification : FORGING FOR SELECTOR PLATE, F2437514-3 (A) C Estab
4) FORGING FOR SELECTOR PLATE Description : FORGING FOR SELECTOR PLATE() Specification : FORGING FOR SELECTOR PLATE, F-2437614-3(A) C Estab
5) FORG FOR 4th GEAR ON LAY SHAFT Description : FORG FOR 4th GEAR ON LAY SHAFT() Specification : FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3 C Estab
6) FORG FOR 5th GEAR ON LAY SHAFT Description : FORG FOR 5th GEAR ON LAY SHAFT() Specification : FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3 C Estab
7) FORG FOR CONSTANT MESH GEAR LAY SHAFT Description : FORG FOR CONSTANT MESH GEAR LAY SHAFT() Specification : FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3 C Estab
Category : p
Grade : 2
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3[71]() Specification : FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3 C Nonestab
Category : dp
Grade : Grade II
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3[71]() Specification : FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3 C Nonestab
Category : dp
Grade : Grade II
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3[71]() Specification : FORGING FOR SUN GEAR TO DRG. NO. FG 765-15-5-3 C Nonestab
Category : dp
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) STOPPER[4]() Specification : 38XC GOST 4543-71 C Nonestab
Category : p
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) STOPPER[4]() Specification : 38XC GOST 4543-71 C Nonestab
Category : p
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) STOPPER[4]() Specification : 38XC GOST 4543-71 C Nonestab
Category : p
Grade : Grade III
Size : L
817 INDIA TRADE CENTRE
220A, NASKARPARA ROAD, GHUSURY NEAR KALITALA MORE HOWRAH West Bengal
PIN1 : 711107
Phone No. : 26553850
GSTIN : 19AADFI1235L1ZC 		AADFI1235L

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING[91]() Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING C Nonestab
2) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
3) MACHINING AND PROCESSING OF AL ALLOY ROD 36MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATERIAL CLASS B OF IS 3965 1981 TO NOSE OF 84MM TPT TO DRG NO F1301 047062E WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF AL ALLOY ROD 36MM SPECN IS 733:1983 GR 24345 IN WP CONDITION MATERIAL CLASS B OF IS-3965-1981 TO NOSE OF 84MM TPT TO DRG. NO. F1301-047062E (WITHOUT SURFACE TREATMENT) C Nonestab
4) MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG NO CC533 C TO DISTANCE TUBE OF 84 MM TPT TO DRG NO F 1301 047281 D WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG. NO. CC533-C TO DISTANCE TUBE OF 84 MM TPT TO DRG. NO. F 1301-047281 D (WITHOUT SURFACE TREATMENT) C Nonestab
5) MACHINING AND PROCESSING OF AL ROD 22 MM DIA TO PRODUCE CASE IN FINISHED CONDITION TO DRG PT NO IQX 318 WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF AL ROD 22 MM DIA +0.25 MM TO PRODUCE "CASE" IN FINISHED CONDITION TO DRG PT NO IQX-318 (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Machining of AL Alloy Rod to produce ADAPTER Nut as per drg no 4 025998 Det No 075 in FC for 125mm HEAT Without surface coating painting operation[91]() Specification : Machining of AL Alloy Rod (I/Code-0611601060) to produce ADAPTER Nut as per drg. no. 4-025998 Det. No. 075 in F/C for 125mm HEAT. Without surface coating/painting operation R Nonestab
2) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 022 in FC for 125mm HEAT[91]() Specification : Machining of Copper Tube (Item Code-070855832) to produce Obturating Band as per drg. no. 4-025998 Det. No. 022 in F/C for 125mm HEAT. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS 970 PT 1 1983 FOR CONVERSION IN CONTACT TO DRG 4 025998 059 TO SKETCH NO OTF S 011 BEFORE TIN PLATING OPERATION INPUT MATERIAL IC 0142007013 IC 9140070998[91]() Specification : Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS:970 PT-1-1983 FOR CONVERSION IN CONTACT TO DRG. 4-025998 059 (TO SKETCH NO. OTF/S/011) BEFORE TIN PLATING OPERATION (INPUT MATERIAL I/C:0142007013) (IC:9140070998) R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) GRENADE BODY BLANK TO GSF DRG NO M 11220[62]() Specification : AS PER DRAWING R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) RETAINER TO DRG NO 9002 00 01 00 00 003 00TA IN FINISH CONDITION[62]() Specification : RETAINER TO DRG. NO. 9002-00-01-00-00-003-00TA IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) CAP TO SK NO OTF PG 002 IN FC[62]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]() Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
2) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]() Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Magazine to Part No IQX 12 for Fuze 162 Mk-8/Mk-9[63]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
818 Amarson Engineering Private Limited
Plot no.-76,Village Waliv Phata,Sativali Road,Vasai East Sativali Road Phalghar Maharashtra
PIN1 : 401208
Phone No. : 8530294555
GSTIN : 27AAGCA1420P1ZN 		MUMA29416C

Download 		1) Small Arms Factory
Name Specification Use Status
1) Rod Rear Spring Recoil for JVPC[70]() Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA C Nonestab
Category :
Grade : Grade III
Size : S
819 Precision Power Products (I) Pvt. Ltd.
c-114, Waluj MIDC, Aurangabad More Chowk Aurangabad Maharashtra
PIN1 : 431136
Phone No. : 7385552123
GSTIN : 27AACCP9001D1ZS 		AACCP9001D

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY Description : 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY() Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK C Nonestab
Category : p
Grade : 3
Size : S
820 Spike Technologies
Plot No:206,Ganesh nilayam Ganesh Nagar Hyderabad Andhra Pradesh
PIN1 : 500037
Phone No. : 000000000
GSTIN : 36ACHFS8783K1Z9 		ACHFS8783K

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY[70]() Specification : As per Drawing E Nonestab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL C Estab
2) BUTT FRAME ASSY AS PER DRG NO.K 6006 WITH FIRM’S MATERIAL[70]() Specification : AS PER DRG NO.K 6006 WITH FIRM’S MATERIAL C Estab
Category : ddp
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FIXED BUTT SUB ASSY[70]() Specification : FIXED BUTT SUB ASSY FOR 7.62 MM ASSAULT RIFLE GHAATAK C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FIXED BUTT SUB ASSY[70]() Specification : FIXED BUTT SUB ASSY FOR 7.62 MM ASSAULT RIFLE GHAATAK C Nonestab
2) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63[70]() Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) COVER & PLATE BRAZING[70]() Specification : Cover & Plate Brazing for 7.62mm Assault Rifle (Ghaatak) as per Drg. No. AR-08-RFI C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) Butt Plastic (Solid) for CQB Carbine[70]() Specification : Butt Plastic (Solid) for CQB Carbine Material: Nylon 6 C Nonestab
2) Magazine Assembly with Steel Insert for 5.56mm X 45mm 30RD for 5.56mm Assault Rifle[79]() Specification : Magazine Assembly with Steel Insert for 5.56x45MM 30RD To Drg. No. RFI SK. 10019 for 5.56MM Assault Rifle C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO K 4110 WITH FIRM'S MATERIAL C Estab
2) PLASTIC MAGAZINE Assy FOR K7040[70]() Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 E Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL E Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]() Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G, E Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]() Specification : AS PER DRAWING C Estab
2) GRIP REAR TO DRG NO 33P 3023[70]() Specification : AS PER DRAWING C Estab
3) SHIELD FRONT TO DRG NO 33P 1105[70]() Specification : AS PER DRAWING C Estab
4) STOCK BUTT ASSY[70]() Specification : AS PER DRAWING C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080[70]() Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) PLASTIC CONTAINER FOR AMK339 AS PER HAPP DRAWING NO.H AMK 125 1 126 REV 0[14]() Specification : HIGH DENSITY POLYTHENE TO SPEC JSS 9330-03:2007(TYPE 2) IN ORANGE COLOUR, (GASKET)-NEOPRENE RUBBER TO SPEC IND/ME/884 (PROV), (CUSHION PAD BOTTOM & TOP)-SPONGE RUBBER TO SPEC IND/ME/645 (PROV) E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) CENTERING BAND FOR 120 MM FSAPDS MK II[99]() Specification : RAW MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF STANDARD 93-8 / MARANYL NYLON A 100 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
2) Retainer[70]() Specification : Retainer for JVPC Drg No 0204 03 02 00 09 00 50 OODC (Item Code- 7012470425) C Nonestab
3) Magazine Assy for JVPC[70]() Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416) P Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]() Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]() Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]() Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]() Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MOUNTING RAIL for JVPC 5.56 MM[70]() Specification : MOUNTING RAIL C Nonestab
Category : p
Grade : Grade III
Size : S