OPF Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

List of registered vendors

Search

Reset

Sort by

Name, Address & Phone No.

Vendor Code

Factory

Products

Category, Grading, Size

921

RAMESH ENGINEERING WORKS
Parvesh Nagar Opp.Chuna Bhatti Nawada Road Sharda Nagar Saharanpur Uttar Pradesh
PIN1 : 247001
Phone No. : 2700097
GSTIN : 09AOVPK3521R1Z2

MRTR02890G

Download

1) Small Arms Factory

Name	Specification	Use	Status
1) HAMMER FOR LMG IN FINISHED CONDITION[70]()	Specification : HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) ASSY CONTACT FOR RGB-60[13]()	Specification : AS DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) SHAFT TO 6206102096[62]()	Specification : SHAFT TO DRG NO. 166.29.305CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) FRAME ASSY TO 6206207012[62]()	Specification : FRAME ASSY TO DRG NO. 172.22.011CB-1CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) PAD TO 6201070149[62]()	Specification : PAD TO DRG. NO.188.70.001-1	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) DISC WHEEL TO DRG NO 1015 000810[90]()	Specification : DISC WHEEL TO DRG NO 1015 000810	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987[90]()	Specification : PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()	Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) LEVER TO 6206211020[62]()	Specification : LEVER TO DRG NO. 172.28.009CB-2	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) CABLE PLATE ASSY TO 6206420018[62]()	Specification : CABLE PLATE ASSY TO DRG. NO. 172.64.028CB-2CB	C	Estab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) CARRIER TO 6206203009[62]()	Specification : CARRIER TO DRG NO. 172.18.027CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) HALF RING TO 6201081084[62]()	Specification : HALF RING TO DRG NO.188.81.058	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SLIPPING RING LF 6770430100 Description : SLIPPING RING LF 6770430100()	Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01	C	Nonestab

Category : p
Grade : 3
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) LOUVER LH TO 6209801477[62]()	Specification : PV572.0718.2363	C	Nonestab
2) LOUVER RH TO 6209801480[62]()	Specification : PV572.0718.2362	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) TRACER PLUG ASSEMBLY[01]()	Specification : 1) TRACER PLUG ASSEMBLY (120/125MM) AS PER DRG. NO.ISX20 SA 2) CONSISTING OF COMPONENTS TRACER PLUG (PHOSPHATED) AS PER DRG. NO. ISX328 3) FITTED WITH BRASS DISC AS PER DRG.NO. ISX329	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) BLANK FOR SEAR SAFETY FOR RIFLE 5.56MM INSAS()	AS PER DRAWING.	C	Not Estab.

Category : P
Grade : II
Size : S

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) LEVER DRG.NO.CII-125 ()	AS PER SPECIFICATION	C	Not Estab.
2) MIRROR MOUNT DRG NO. IRDE-1175/83()	AS PER SPECIFICATION	C	Not Estab.
3) TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7()	AS PER SPECIFICATION	C	Not Estab.
4) COVER PLATE PROTECTIVE, DUST AND MOISTURE CII-140/6()	AS PER SPECIFICATION	C	Not Estab.
5) LAMP WANDERING 1A AS PER DRG.NO.MCT-3212()	AS PER SPECIFICATION	C	Not Estab.
6) NUT,PLAIN,HEXAGON AS PER DRG.NO.:IRDE-335/52 ()	AS PER SPECIFICATION	C	Not Estab.
7) RING RETAINING LARGE AS PER DRG. NO. IRDE-335/33()	AS PER SPECIFICATION	C	Not Estab.
8) HOUSING OBJECTIVE CQA(I)-793/44()	AS PER SPECIFICATION	C	Not Estab.
9) ADAPTOR TO CWC/229/41()	AS PER SPECIFICATION	C	Not Estab.
10) DIAL SCALE MCT-3109()	AS PER SPECIFICATION	C	Not Estab.
11) BOLT LATCH MCT-3103()	AS PER SPECIFICATION	C	Not Estab.
12) NUT SLEEVE MCT-3108()	AS PER SPECIFICATION	C	Not Estab.
13) CELL EP CWC/229/35/1()	AS PER SPECIFICATION	C	Not Estab.
14) Elevation Curve-557 Drg. No. CQA(I)-792/7()	AS PER SPECIFICATION	C	Not Estab.
15) OG ASSY CONSISTING OF (i) Ring Lock Keyed IRDE-1274/35 (ii) Cup IRDE- 1274/36 (iii) Spacer Optical Element IRDE-1274/38 (iv) Ray Shade IRDE-1274/41()	AS PER SPECIFICATION	C	Not Estab.
16) CELL GRATICULE CWC/229/28/1()	AS PER SPECIFICATION	C	Not Estab.
17) RING RETAINING EP CWC/229/33()	AS PER SPECIFICATION	C	Not Estab.
18) FRAME W/O ENGRAVING Drg. no. Ã¢â‚¬â€œ MCT-3468()	AS PER SPECIFICATION	C	Not Estab.
19) GRATICULE RING CWC/229/67/2()	AS PER SPECIFICATION	C	Not Estab.
20) SECURING RING CWC/229/56/1()	AS PER SPECIFICATION	C	Not Estab.
21) COVER PLATE H CWC /229/64/3()	AS PER SPECIFICATION	C	Not Estab.
22) CELL OPTICAL ELEMENT TO MCT-2943/2()	AS PER SPECIFICATION	C	Not Estab.
23) SCREW MCT-2949/2()	AS PER SPECIFICATION	C	Not Estab.
24) RING RETAINING MCT-2959/1()	AS PER SPECIFICATION	C	Not Estab.
25) ASSY. OF EYE PEICE LEFT MCT-3286()	AS PER SPECIFICATION	C	Not Estab.
26) ASSY. OF EYE P[EICE RIGHT MCT-3285()	AS PER SPECIFICATION	C	Not Estab.

Category : P
Grade : III
Size : S

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]()	Specification : Vial Level Circular Cased MK 2 MCT 3439	C	Nonestab

Category : P
Grade : III
Size :

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]()	Specification : Vial Level Circular Cased MK 2 MCT 3439	C	Estab
2) LEVEL FIRE CONTROL INSTRUMENT AS PER DRG. NO. IRDE-1135/SA-1[74]()	Specification :	R	Estab

Category : P
Grade : III
Size :

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750()	Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206	R	Nonestab

Category : p
Grade : 3
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) MIRROR ASSY TO DRG NO AL5950538 (LF 7440200770)[74]()	Specification : MIRROR ASSY TO DRG NO AL5950538 (LF 7440200770)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)[74]()	Specification : ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)[74]()	Specification : UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) EYE GUARD FOR PNK-4S TO DRG NO BL6548046 (L.F.-7440300177)[74]()	Specification : EYE GUARD FOR PNK-4S TO DRG NO BL6548046 (L.F.-7440300177)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)[74]()	Specification : CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)[74]()	Specification : BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) COVER FRAME ASSY BL6426108 FOR PNK-4S (LF 7440300982)[74]()	Specification : COVER FRAME ASSY BL6426108 FOR PNK-4S (LF 7440300982)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) LOCATOR TO DRG NO BL8362427 (LF 7432111032)[74]()	Specification : LOCATOR TO DRG NO BL8362427 (LF 7432111032)	C	Estab
2) CLAMP TO DRG NO AF8667322 (LF 7432412011)[74]()	Specification : CLAMP TO DRG NO AF8667322 (LF 7432412011)	C	Estab
3) MOUNT TO DRG NO AF8638214 (LF 7432412046)[74]()	Specification : MOUNT TO DRG NO AF8638214 (LF 7432412046)	C	Estab
4) MOUNT TO DRG NO AF8637071 (LF 7432411043)[74]()	Specification : MOUNT TO DRG NO AF8637071 (LF 7432411043)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) Gear for Block BPV-29 to drg. No. BPV29-160[74]()	Specification : Gear for Block BPV-29 to drg. No. BPV29-160	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) Block PL, AL5.008.009[74]()	Specification : Block PL, AL5.008.009	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) SPACER FOR BLOCK D TO DRG NO AL7840573 (LF 7440200402)[74]()	Specification : SPACER FOR BLOCK D TO DRG NO AL7840573 (LF 7440200402)	C	Estab
2) SPACER FOR BLOCK D TO DRG NO IUMK713111007 (LF 7440200408)[74]()	Specification : SPACER FOR BLOCK D TO DRG NO IUMK713111007 (LF 7440200408)	C	Estab
3) GASKET FOR INFORMATION BLOCK 1G46 (LF 7440200812)[74]()	Specification : GASKET FOR INFORMATION BLOCK 1G46 (LF 7440200812)	C	Estab
4) CARDEN HEAD FOR VISOR 1G46 (LF 7440200906)[74]()	Specification : CARDEN HEAD FOR VISOR 1G46 (LF 7440200906)	C	Estab
5) AXLE FOR VISOR TO DRG NO IUMK716513001 (LF 7440201350)[74]()	Specification : AXLE FOR VISOR TO DRG NO IUMK716513001 (LF 7440201350)	C	Estab
6) DRIVER DRG NO AL8344129 FOR VISOR (LF 7440201705)[74]()	Specification : DRIVER DRG NO AL8344129 FOR VISOR (LF 7440201705)	C	Estab
7) FRAME FOR PNK-4S (LF 7440202620)[74]()	Specification : FRAME FOR PNK-4S (LF 7440202620)	C	Estab
8) COVER FOR BPV29000 TO DRG NO BPV29.142-01 (LF 7440901422)[74]()	Specification : COVER FOR BPV29000 TO DRG NO BPV29.142-01 (LF 7440901422)	C	Estab
9) CAP FOR BPV29000 TO DRG NO PK43.042-04 (LF 7440901423)[74]()	Specification : CAP FOR BPV29000 TO DRG NO PK43.042-04 (LF 7440901423)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) MACHINING OF BODY TO DRG NO Y-6213326 (LF 7432316006)[74]()	Specification : MACHINING OF BODY TO DRG NO Y-6213326 (LF 7432316006)	C	Estab
2) COMPLETE MACHINING OF FRAME TO DRG NO BL8638006 (LF 7570124400)[75]()	Specification : COMPLETE MACHINING OF FRAME TO DRG NO BL8638006 (LF 7570124400)	C	Estab
3) COMPLETE MACHINING OF BASE TO DRG NO BL8060039 (LF 7570126500)[75]()	Specification : COMPLETE MACHINING OF BASE TO DRG NO BL8060039 (LF 7570126500)	C	Estab
4) COMPLETE MACHINING OF COVER TO DRG NO BL8040570 (LF 7570126900)[75]()	Specification : COMPLETE MACHINING OF COVER TO DRG NO BL8040570 (LF 7570126900)	C	Estab
5) COMPLETE MACHINING OF BODY TO DRG NO BL8022364 (LF 7570130600)[75]()	Specification : COMPLETE MACHINING OF BODY TO DRG NO BL8022364 (LF 7570130600)	C	Estab
6) COMPLETE MACHINING OF COVER TO DRG NO BL8040672 (LF 7570131200)[75]()	Specification : COMPLETE MACHINING OF COVER TO DRG NO BL8040672 (LF 7570131200)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)[74]()	Specification : BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)	C	Estab
2) COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)[74]()	Specification : COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)	C	Estab
3) GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)[74]()	Specification : GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)	C	Estab
4) COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)[74]()	Specification : COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)	C	Estab
5) GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)[74]()	Specification : GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)	C	Estab
6) LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)[74]()	Specification : LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)[74]()	Specification : BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)	C	Estab
2) COMPLETE MACHINING OF MAIN BODY DC24 LF NO 7570202400[75]()	Specification : COMPLETE MACHINING OF MAIN BODY DC24 LF NO 7570202400	C	Estab
3) MACHINING OF BODY DC250 M5 LF NO 7570125000[75]()	Specification : MACHINING OF BODY DC250 M5 LF NO 7570125000	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)[74]()	Specification : UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)	C	Nonestab
2) BUSHING LF NO 7440200737[74]()	Specification : BUSHING LF NO 7440200737	C	Nonestab
3) STOCK LF NO 7440201747[74]()	Specification : STOCK LF NO 7440201747	C	Nonestab
4) BUSH LF NO 7440201968[74]()	Specification : BUSH LF NO 7440201968	C	Nonestab
5) BODY LF NO 7440205749[74]()	Specification : BODY LF NO 7440205749	C	Nonestab
6) PLATE LF NO 7440205751[74]()	Specification : PLATE LF NO 7440205751	C	Nonestab
7) LEVER LF NO 7440205772[74]()	Specification : LEVER LF NO 7440205772	C	Nonestab
8) STOP LF NO 7440205985[74]()	Specification : STOP LF NO 7440205985	C	Nonestab
9) FLANGE LF NO 7440206000[74]()	Specification : FLANGE LF NO 7440206000	C	Nonestab
10) SPREAD LF NO 7440206674[74]()	Specification : SPREAD LF NO 7440206674	C	Nonestab
11) PLATE LF NO 7440206681[74]()	Specification : PLATE LF NO 7440206681	C	Nonestab
12) LEVER LF NO 7440206683[74]()	Specification : LEVER LF NO 7440206683	C	Nonestab
13) ARM LF NO 7440206690[74]()	Specification : ARM LF NO 7440206690	C	Nonestab
14) RIVET LF NO 7440206691[74]()	Specification : RIVET LF NO 7440206691	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) CLAMP TO DRG NO AF8667322 (LF 7432412011)[74]()	Specification : CLAMP TO DRG NO AF8667322 (LF 7432412011)	C	Nonestab
2) MOUNT TO DRG NO AF8637071 (LF 7432411043)[74]()	Specification : MOUNT TO DRG NO AF8637071 (LF 7432411043)	C	Nonestab
3) MOUNT TO DRG NO AF8638214 (LF 7432412046)[74]()	Specification : MOUNT TO DRG NO AF8638214 (LF 7432412046)	C	Nonestab
4) LOCATOR TO DRG NO BL8362427 (LF 7432111032)[74]()	Specification : LOCATOR TO DRG NO BL8362427 (LF 7432111032)	C	Nonestab
5) TERMINAL BLOCK DRG NO AL6672273 LF NO 7440200723[74]()	Specification : TERMINAL BLOCK DRG NO AL6672273 LF NO 7440200723	C	Nonestab
6) AXLE ECCENTRIC DRG NO IUMK304515001 LF NO 7440200725[74]()	Specification : AXLE ECCENTRIC DRG NO IUMK304515001 LF NO 7440200725	C	Nonestab
7) CASING DRG NO AL8212290 LF NO 7440201703[74]()	Specification : CASING DRG NO AL8212290 LF NO 7440201703	C	Nonestab
8) BODY DRG NO AL8035159 LF NO 7440205784[74]()	Specification : BODY DRG NO AL8035159 LF NO 7440205784	C	Nonestab
9) TAPE DRG NO AL6394015 LF NO 7445101481[74]()	Specification : TAPE DRG NO AL6394015 LF NO 7445101481	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) Protective cover sight to part no.1161416 [90]()	Specification : AS PER GCF /DRG/SPECN/IS/BS	C	Nonestab

Category : dp
Grade : Grade I
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) LEVER REMOTE CONTROL TO DRG NO. 3040-003322[91]()	Specification : AS PER DRG.	C	Nonestab
2) BRACKET TO DRG. NO. 1015-000327[91]()	Specification : AS PER DRG	C	Nonestab
3) CAM TO DRG. NO. 1015-000373[91]()	Specification : AS PER DRG	C	Nonestab
4) CAP (FOR CAP DUST REOIL MECH) TO DRG. NO. 1015-000580[91]()	Specification : AS PER DRG	C	Nonestab
5) CYLINDER CONTROL TO DRG. NO. 1015-000585[91]()	Specification : AS PER DRG	C	Nonestab
6) SOCKET HAND SPIKE (FOR TRAIL LEFT ASSY) TO DRG. NO. 1015-000735[91]()	Specification : AS PER DRG.	C	Nonestab

Category : dp
Grade : Grade I
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) FUZE SETTING TOOL TO PT. NO. 5189693[90]()	Specification : AS PER TENDER NO. 160457FHFO ON E-PROC. PORTAL	C	Nonestab
2) FUZE FITTING TOOL PT. NO. 5189694[90]()	Specification : AS PER TENDER NO. 160457FHFO ON E-PROC. PORTAL	C	Nonestab

Category : dp
Grade : Grade I
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157 Description : ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157()	Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL	R	Nonestab

Category : p
Grade : 3
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) LEVER SLIDE LOCKING BLANK FOR FOR PISTOL AUTO 9MM 1A.[70]()	Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A	C	Nonestab

Category : P
Grade : II
Size :

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab
2) Lanyard Short to Drg No 161 1292[63]()	Specification : As per Drg. No. 161-1292	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab
2) Lanyard Short to Drg No 161 1292[63]()	Specification : As per Drg. No. 161-1292	C	Nonestab
3) Hand Rammer to part no 166 282[63]()	Specification : As per Part No. 166-282	C	Nonestab
4) Brush primer as per drg no 161 1390[63]()	Specification : as per drg no 161 1390	C	Nonestab
5) Pressure Plate Fasten Fixture to Part No 166 617[63]()	Specification : As per Part No 166-617	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab
2) Lanyard Short to Drg No 161 1292[63]()	Specification : As per Drg. No. 161-1292	C	Nonestab
3) Hand Rammer to part no 166 282[63]()	Specification : As per Part No. 166-282	C	Nonestab
4) Brush primer as per drg no 161 1390[63]()	Specification : as per drg no 161 1390	C	Nonestab
5) Pressure Plate Fasten Fixture to Part No 166 617[63]()	Specification : As per Part No 166-617	C	Nonestab
6) ARM AS PER DRG NO D 4083347[63]()	Specification : As per drawing	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) LOCK[06]()	Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) Pulley[06]()	Specification : Assemble item	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]()	Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1	E	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) BRACE ASSY[06]()	Specification : BRACE ASSY / 54.28.772CBCB	E	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) THRUST BUSHING / 175.95.114-1[06]()	Specification : THRUST BUSHING / 175.95.114-1	E	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) Right hand carrier - 172.62.136[06]()	Specification : GOST:4543-71	C	Nonestab
2) Left hand carrier - 175.62.137[06]()	Specification : GOST 4543-71	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) BRACKET ASSEMBLY DRAWING[06]()	Specification : GOST4543-71	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) Left Hand Blade Unit[06]()	Specification : Left Hand Blade Unit / IMSA-0767	E	Nonestab
2) Right Hand Blade Unit / IMSA-0768[06]()	Specification : Right Hand Blade Unit / IMSA-0768	E	Nonestab

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()	Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Pin Lever Catch Magazine for JVPC[70]()	Specification : Pin Lever Catch Magazine for JVPC 5.56MM Drg. No. 0204-03-02-02-18-020-00DA	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Steel blank of Receiver plate Left and Right FOR MAG[70]()	Specification : AS PER DRG.	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]()	Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) PACKING RING[06]()	Specification : PACKING RING / 188.35.007	E	Nonestab

Category : p
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081008459 MACHINING OF TRAIL SPADE TO DRAWING NO 3048309 MATERIAL WILL BE SUPPLIED BY GCF[90]()	Specification : MACHINING OF TRAIL SPADE TO DRAWING NO.3048309.(MATERIAL WILL BE SUPPLIED BY GCF).	C	Estab
2) 9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF[90]()	Specification : MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).	C	Estab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9070056720 PART M A OF RB TO DRG GCF 20A SK874[90]()	Specification : 9070056720 PART M A OF RB TO DRG GCF 20A SK874	C	Nonestab

Category :
Grade : Grade III
Size : S

922

AMTONE RUBBER INDUSTRIES
VILL+PO: RAGHUDEVPUR (EAST) PS: ULUBERIA HOWRAH West Bengal
PIN1 : 711322
Phone No. : 26619695
GSTIN : 19AFUPL1078A1ZB

AFUPL1078A

Download

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar[2103679554]()	Specification : ADRDE/540-A-5(a) AND ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) PRIMER GASKET F1301 036530 D LF 2013436143[20]()	Specification : PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526 Description : 3rd SET OF 4 ITEMS FOR MMHG 9911358526()	Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS	C	Nonestab
2) SLIPPING RING LF 6770430100 Description : SLIPPING RING LF 6770430100()	Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) PRIMER GASKET PART NO 6409794 LF 2013999910 Description : PRIMER GASKET PART NO 6409794 LF 2013999910()	Specification : PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) O RING 76 X 2 PART NO 450001307 LF 2013999919[20]()	Specification : O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974	R	Nonestab
2) O RING 67 X 2 PART NO 6414120 LF 2013999921[20]()	Specification : O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973	R	Nonestab
3) O RING 29 2 X 2 PART NO 6413414 LF 2013999920[20]()	Specification : O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972	R	Nonestab
4) O RING 61 X 1 6 PART NO 6413412 LF 2013999914[20]()	Specification : O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) O RING 78 X 2 PART NO 6409795 LF 2013999909[20]()	Specification : O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960	C	Nonestab
2) O RING 37 X 2 4 PART NO 6414441 LF 2013999924[20]()	Specification : O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978	C	Nonestab
3) O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922[20]()	Specification : O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6410900220 LENS PART DRG. 065/4 FOR 125MM HEAT[64]()	Specification : SPECN. NO. JSS 9330-05	C	Nonestab
2) 6410900110 INSERT DETAIL NO.67 FOR 125 MM HEAT[64]()	Specification : MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A".	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) O RING 71 X 1 8 PART NO 6413211 LF 2013999912 Description : O RING 71 X 1 8 PART NO 6413211 LF 2013999912()	Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961	R	Nonestab
2) O RING 71 X 1 65 PART NO 6413243 LF 2013999913 Description : O RING 71 X 1 65 PART NO 6413243 LF 2013999913()	Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962	R	Nonestab
3) O RING 71 X 1 6 PART NO 6413232 LF 2013999911 Description : O RING 71 X 1 6 PART NO 6413232 LF 2013999911()	Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956	R	Nonestab
4) O RING 26 X 1 2 PART NO 6439353 LF 2013999908 Description : O RING 26 X 1 2 PART NO 6439353 LF 2013999908()	Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959	R	Nonestab
5) O RING 67X2 5 PART NO 6413251 LF 2013999907 Description : O RING 67X2 5 PART NO 6413251 LF 2013999907()	Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958	R	Nonestab
6) O RING 25 1X1 6 PART NO 6416337 LF 2013999903 Description : O RING 25 1X1 6 PART NO 6416337 LF 2013999903()	Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954	R	Nonestab
7) O RING 28 X 2 6 PART NO 6413250 LF 2013999906 Description : O RING 28 X 2 6 PART NO 6413250 LF 2013999906()	Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957	R	Nonestab
8) O RING 30X2 PART NO 6413212 LF 2013999901 Description : O RING 30X2 PART NO 6413212 LF 2013999901()	Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) Phenolic Moulded Components()	As per specification	R	Estab.
2) Rubber & Plastic Components()	As per specification	R	Estab.

Category : P
Grade : III
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) SPOOL PLASTIC TO HOLD 55 METERS OF CABLE[70]()	Specification : SPOOL PLASTIC TO HOLD 55 METERS OF CABLE DRG. NO. OCF SK 1087-B	C	Nonestab

Category : P
Grade : III
Size :

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038[90]()	Specification : PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038	C	Nonestab
2) 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037[90]()	Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037	C	Nonestab
3) 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039[90]()	Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039	C	Nonestab
4) 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040[90]()	Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040	C	Nonestab
5) 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4[90]()	Specification : PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4	C	Nonestab

Category : p
Grade : 3
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) INSULATION SLEEVING ELECTRICAL[90]()	Specification : ISULATION SLEEVING ELECTRICAL	C	Nonestab
2) INSULATION SLEEVING ELECTRICAL TO DRG NO 5970 002812[90]()	Specification : INSULATION SLEEVING ELECTRICAL TO DRG.NO.5970-002812.	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6120909014 BLOCK EBONITE MOULDED PLASTIC BLACK[61]()	Specification : IS:6693	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6120909501 BASE METALLIC FOR SCCC 125 MM AMMN[61]()	Specification : BASE TO CQA(A) DRAWING NUMBER 3-026892, DETAIL 1, DC-37240-ADATED:17-12-2009.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) SEALING RING TO DRG NO TRD 1 2 2246 LF 9911357874[99]()	Specification : SEALING RING TO DRG.NO.TRD-1-2-2246.	C	Nonestab
2) O RING LF 6170444630[61]()	Specification : 'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.	C	Nonestab
3) SET CONSISTING OF 3 RUBBER COMPONENTS LF 9911356367[99]()	Specification : SET CONSIST OF 3 COMPT. (1) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 (2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 (3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01 MATERIAL FOR ABOVE ITEM 1-3 SPCEN:IND/	C	Nonestab
4) O RING LF 9911357860[99]()	Specification : DRG.NO. TRD-1-2-2261	C	Nonestab
5) O RING LF 2013200384[20]()	Specification : DRG.NO. F1301-024240-B DC NO. 36345-A DT. 29/10/97 MATERIAL SPECN: IND/ME/884 (PROV.)	C	Nonestab
6) O RING 67X2 5 MM TO DRG NO 6413251 LF 9911357872[99]()	Specification : DRG.NO. TRD-1-2-2248	C	Nonestab
7) O RING 78X2 LF 2013436144[20]()	Specification : 'O' RING 78X2 (2013436144)	R	Nonestab
8) O RING 30X2 DRG NO TRD 1 2 2276 LF 9911357904[99]()	Specification : "O" RING 30X2 TO DRG.NO.TRD-1-2-2276.	R	Nonestab
9) O RING 26 X 1 2 PART NO 6439353 LF 2013999908[20]()	Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959	R	Nonestab
10) O RING 67X2 5 PART NO 6413251 LF 2013999907[20]()	Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958	R	Nonestab
11) O RING 28 X 2 6 PART NO 6413250 LF 2013999906[20]()	Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957	R	Nonestab
12) O RING 25 1X1 6 PART NO 6416337 LF 2013999903[20]()	Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954	R	Nonestab
13) O RING 30X2 PART NO 6413212 LF 2013999901[20]()	Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953	R	Nonestab
14) O RING 71 X 1 65 PART NO 6413243 LF 2013999913[20]()	Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962	R	Nonestab
15) O RING 71 X 1 8 PART NO 6413211 LF 2013999912[20]()	Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961	R	Nonestab
16) O RING 71 X 1 6 PART NO 6413232 LF 2013999911[20]()	Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956	R	Nonestab
17) O RING LF 9911357865[99]()	Specification : "O" RING 71*1.6 DRG.NO.TRD-122259	C	Nonestab
18) O RING LF 9911357868[99]()	Specification : "O" RING 71*1.8 DRG.NO.TRD-122260	C	Nonestab
19) O RING LF 9911357869[99]()	Specification : "O" RING 71*1.65TO DRG.NO.TRD122263	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) O RING LF 9911357869[99]()	Specification : "O" RING 71*1.65TO DRG.NO.TRD122263	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6410900330 BASE TO DRG.4-025998 081 125MM HEAT[64]()	Specification : SPECN. NO. JSS 9330-05	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) Assembly Centre Contact for RGB 60[03]()	Specification : ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3. (L..F No. 0126701688)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) ASSY CONTACT FOR RGB 60 AS PER DRG NO NASK 1068 6[01]()	Specification : ASSY CONTACT FOR RGB-60 AS PER DRG.NO: NASK 1068/6	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6419000056 FIBRE RING DTL NO 078 FOR 125MM AMN[64]()	Specification : RING TO DRG. NO. 4-024610 DETAIL NO. 078 DC NO.36608-A FOR125MM AMMUNITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SLIPPING RING PART NO 5212095 LF 9911358418 Description : SLIPPING RING PART NO 5212095 LF 9911358418()	Specification : SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) O Ring 74point5x3 mm TO DRG NO TRD 845a LF 6170444650 Description : O Ring 74point5x3 mm TO DRG NO TRD 845a LF 6170444650()	Specification : O Ring 74.5x3mm TO DRG NO TRD 845a	R	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) O RING 67point5 X 2point4 lf 2013436145 Description : O RING 67point5 X 2point4 lf 2013436145()	Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE	R	Nonestab

Category : p
Grade : 3
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) EYE SHIELD TO DRG No.BL8647007[9001100409]()	Specification : AS PER DRAWING	C	Estab
2) FRAME TO DRG. NO. BL7804255 (LF-7420113028)[7420113028]()	Specification : AS PER DRAWING	C	Estab
3) WASHER TO DRG. NO. AF8942300 (LF-9024111598)[90]()	Specification : AS PER DRAWING	C	Estab
4) SEALING RING TO DRG. No. OLF/STD/117 (LF-7420214011)[74]()	Specification : AS PER DRAWING	C	Estab
5) SHOCK ABSORBER TO DRG. No. BSH8639022 (LF-7434014001)[74]()	Specification : AS PER DRAWING	C	Estab
6) EYE SHIELD TO DRG. No. BSH8647141 (LF-9927090476)[99]()	Specification : AS PER DRAWING	C	Estab
7) RING TO DRG. No. 14508686945 (LF-9927094488)[99]()	Specification : AS PER DRAWING	C	Estab
8) RING TO DRG NO AF8683898 LF 7420414003[74]()	Specification : AS PER DRAWING	C	Estab
9) BUSHING TO DRG NO AF8220467 LF 7432414001[74]()	Specification : AS PER DRAWING	C	Estab
10) BUSHING TO DRG NO AF8220575 LF 7432414008[74]()	Specification : AS PER DRAWING	C	Estab
11) GASKET TO DRG NO AF8683997 LF 7432415001[74]()	Specification : AS PER DRAWING	C	Estab
12) GASKET TO DRG NO Y7596269 LF 9023101157[90]()	Specification : AS PER DRAWING	C	Estab
13) RING TO DRG NO AF8683898 14 LF 9927086177[99]()	Specification : AS PER DRAWING	C	Estab
14) GASKET TO DRG NO BTS8683344 LF7421014004[74]()	Specification : AS PER DRAWING	C	Estab
15) RING TO DRG NO AF8683535 LF7432414007[74]()	Specification : AS PER DRAWING	C	Estab
16) GASKET TO DRG NO AL8683174 LF 9927091007[99]()	Specification : AS PER DRAWING	C	Estab
17) PACKING TO DRG NO BL7841655 LF 9001110753[90]()	Specification : AS PER DRAWING	C	Estab
18) GASKET TO DRG NO AF8684036 LF 7432414006[74]()	Specification : AS PER DRAWING	C	Estab
19) INSERT TO DRG NO AF8214167 LF 7432414009[74]()	Specification : AS PER DRAWING	C	Estab
20) Gur Mutt LF 7590100599[75]()	Specification : OLF/MISC/599	C	Estab
21) Ring to drg No AF8683898 13 LF 9927086176[99]()	Specification : As per drg.	C	Estab
22) SPACING RING TO DRG NO BTS8683349 LF 7421014005[74]()	Specification : AS PER DRG	C	Estab
23) PROTECTOR LF 9023101592[90]()	Specification : AS PER DRG	C	Estab
24) GASKET TO DRG NO 14547840697 01 LF 9927089046[99]()	Specification : AS PER DRG	C	Estab
25) GASKET TO DRG NO BL7840298 LF 7420115021[74]()	Specification : AS PER DRG	C	Estab
26) ASSY OF CASE AND COVER LF 7432113004[74]()	Specification : AS PER DRG	C	Estab
27) BUSH TO DRG NO BL7860686 LF 9001200254[90]()	Specification : AS PER DRG	C	Estab
28) PACKING TO DRG NO BL9364584 LF 9001100189[90]()	Specification : AS PER DRG	C	Estab
29) GASKET TO DRG NO BTS8683343 LF 7421014003[74]()	Specification : AS PER DRG	C	Estab
30) WASHER TO DRG NO BL7854124 LF 7420113045[74]()	Specification : AS PER DRG	C	Estab
31) RING TO DRG NO BL9362014 LF 9001100197[90]()	Specification : AS PER DRG	C	Estab
32) RING RUBBER MOULD TO DRG NO BL9362687 05 LF 7590100045[75]()	Specification : AS PER DRG	C	Estab

Category : p
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) MOULDING OF FIRING PIN ASSY TO DRG NO 9A 621 05 020[91]()	Specification : AS PER DRAWING	C	Nonestab
2) MOULDING OF LEAD CONTACT ASSY TO DRG NO 9 A 621 05 030[91]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) GASKET TO DRG NO MCT 2896 OLD MCT 1574[00]()	Specification : GASKET TO DRG NO. MCT-2896 (OLD MCT-1574)	C	Nonestab
2) SYNTHETIC RUBBER SHHEET 5 MM THICK[21]()	Specification : SYNTHETIC RUBBER SHHEET 5.00MM THICK.	C	Nonestab
3) SYN RUBBER SHEET THICK SMOOTH FINISH TO SPECN IND TC 2437 L[21]()	Specification : SYN. RUBBER SHEET 1/16"(1.6MM) THICK SMOOTH FINISH TO SPECN IND/TC/2437(L)	C	Nonestab
4) PAD CASING LOWER DRG NO IRDE 1810 13 A MCT 2152[74]()	Specification : PAD CASING LOWER,DRG NO.IRDE-1810/13 A MCT-2152	C	Nonestab
5) GASKET TO DRG NO IRDE 1809 13 MCT 2418 FOR DRIVERS DAY SIGHT SIDE[74]()	Specification : GASKET TO DRG NO. IRDE 1809/13 MCT-2418 FOR DRIVERS DAY SIGHT SIDE.	C	Nonestab
6) GASKET TO DRG NO MCT 1691[74]()	Specification : GASKET TO DRG NO.MCT-1691	C	Nonestab
7) GASKET TO DRG NO MCT 2416 FOR DRIVERS DAY SIGHT CENTRAL[74]()	Specification : GASKET TO DRG. NO. MCT-2416 FOR DRIVERS DAY SIGHT CENTRAL.	C	Nonestab
8) GASKETTO DRG NO IRDE 1808 7 MCT 1692[74]()	Specification : GASKETTO DRG NO. IRDE-1808/7,MCT-1692	C	Nonestab
9) GASKET WINDOW LOWER TO DRG NO IRDE 1808 10 MCT 1688[74]()	Specification : GASKET WINDOW LOWER TO DRG NO.IRDE 1808/ 10 MCT-1688	C	Nonestab
10) GASKET WINDOW GLASS TO DRG NO MCT 1690[74]()	Specification : GASKET WINDOW GLASS TO DRG NO. MCT-1690	C	Nonestab
11) GASKET REAR CENTRAL MCT 1694[74]()	Specification : GASKET REAR CENTRAL MCT-1694	C	Nonestab
12) PACKING RUBBER TO DRG NO IRDE 1808 12[74]()	Specification : PACKING RUBBER TO DRG NO.IRDE-1808/12	C	Nonestab
13) SYNTHETIC RUBBER NITRILE VARIETY BLACK IRHD BS 2751[21]()	Specification : SYNTHETIC RUBBER NITRILE VARIETY BLACK IRHD-41.50 BS:2751,2.50 MM THICK.	C	Nonestab
14) SYN RUBBER SHEET IND TC 2437 LATEST[21]()	Specification : SYN.RUBBER SHEET 2.5MM THICK IND/TC/2437 [LATEST]	C	Nonestab
15) SYN RUBBER SHEET 1 MM SPECN BS 2751 3222 BA 50 NITRILE VARITY[21]()	Specification : SYN. RUBBER SHEET 1.00MM SPECN.BS-2751- 3222 BA-50 NITRILE VARITY	C	Nonestab
16) COVER MIRROR TO DRG NO IRDE 2051 63 MCT 1596[74]()	Specification : COVER MIRROR TO DRG NO.IRDE-2051/63 MCT-1596	C	Nonestab
17) WASHER TO DRG NO IRDE 2048 87[74]()	Specification : WASHER TO DRG NO.IRDE-2048/87	C	Nonestab
18) HEAD REST OPT INST TO DRG NO MCT 3141 5 SHEETS[74]()	Specification : HEAD REST OPT. INST.TO DRG NO.MCT-3141 5 SHEETS	C	Nonestab
19) CAP BODY UPPER TO DRG NO IRDE 2048 173[74]()	Specification : CAP BODY UPPER TO DRG NO.IRDE-2048/173	C	Nonestab
20) WASHER TO DRG NO MCT 1332 1[74]()	Specification : WASHER TO DRG NO.MCT-1332/1	C	Nonestab
21) O RING DRGNO MCT 1331 1[74]()	Specification : "O" RING DRGNO. MCT-1331/1.	C	Nonestab
22) WASHER TO DRG NO MCT 1392[74]()	Specification : WASHER TO DRG.NO,MCT-1392	C	Nonestab
23) WASHER DRG NO MCT 1393[74]()	Specification : WASHER DRG NO.MCT-1393	C	Nonestab
24) WASHER TO DRG NO MCT 1395[74]()	Specification : WASHER TO DRG NO,MCT-1395	C	Nonestab
25) WASHER FLAT DRNO IRDE 2605 34 MCT 1397[74]()	Specification : WASHER FLAT DRNO.IRDE-2605/34,MCT-1397	C	Nonestab
26) EYE GUARD DRG NO MCT 1398[74]()	Specification : EYE GUARD .DRG NO.MCT-1398	C	Nonestab
27) COVER OG DRG NO MCT 1399[74]()	Specification : COVER OG DRG NO.-MCT-1399	C	Nonestab
28) COVER PROTECTIVE MCT 1728[74]()	Specification : COVER PROTECTIVE MCT-1728	C	Nonestab
29) O RING DRG NO MCT 1396[74]()	Specification : "O" RING DRG NO. MCT-1396	C	Nonestab
30) GASKET FOR TNP 165A TNPA 65A TNPO 168B AS PER DRG NO MCT 1622 1[00]()	Specification : GASKET FOR TNP-165A,TNPA-65A&TNPO-168B AS PER DRG.NO. MCT-1622/1	C	Nonestab
31) PACKING FOR TNPA 65A AS PER DRG NO AU8 684 378[00]()	Specification : PACKING FOR TNPA-65A AS PER DRG.NO. : AU8.684.378	C	Nonestab
32) PACKING FOR TNPA 65A AS PER DRG NO MCT 3262[00]()	Specification : PACKING FOR TNPA-65A AS PER DRG.NO.MCT-3262	C	Nonestab
33) GASKET FOR TNPA 65A AS PER DRG NO AU8 683 262[00]()	Specification : GASKET FOR TNPA-65A AS PER DRG.NO.:AU8.683.262	C	Nonestab
34) PACKING TO DRG NO MCT 1410[74]()	Specification : PACKING TO DRG NO.MCT-1410	C	Nonestab
35) PACKING TO DRG NO AU8 683 274 MCT 1409[74]()	Specification : PACKING TO DRG NO.AU8.683.274 (MCT-1409)	C	Nonestab
36) WASHER MCT 1333 1[74]()	Specification : WASHER MCT-1333/1)	C	Nonestab
37) COVER OPTICAL INSTRUMENT O G DRG NO MCT 1338 1[74]()	Specification : COVER OPTICAL INSTRUMENT (O.G) DRG NO.MCT-1338/1	C	Nonestab
38) RUBBER WASHER TO DRG NO MCT 1335 1[74]()	Specification : RUBBER WASHER TO DRG NO., MCT-1335/1	C	Nonestab
39) O RING DRG NO MCT 1330 1[74]()	Specification : O-RING DRG.NO.MCT-1330/1	C	Nonestab
40) O RING DRG NO MCT 1328 1[74]()	Specification : "O" RING DRG.NO. MCT-1328/1.	C	Nonestab
41) O RING TO DRG NO MCT 1329 1[74]()	Specification : "O" RING TO DRG.NO. MCT-1329/1	C	Nonestab
42) EYE SHIELD TO DRG NO MCT 1926 1[74]()	Specification : EYE SHIELD TO DRG NO.MCT-1926/1,	C	Nonestab
43) PACKING TO DRG NO MCT 3262 FOR TNPA 65A[74]()	Specification : PACKING TO DRG.NO.MCT-3262 FOR TNPA-65A	C	Nonestab
44) SPACER SCREWED FOR TNPA 165A AS PER DRG NO AU8 683 014[00]()	Specification : SPACER SCREWED FOR TNPA-165A AS PER DRG.NO.:AU8.683.014	C	Nonestab
45) SPACER SCREWED FOR TNP 165A AS PER DRG NO AU8 683 015[00]()	Specification : SPACER SCREWED FOR TNP-165A AS PER DRG.NO.:AU8.683.015	C	Nonestab
46) GASKET TO DRG NO MCT 1408[74]()	Specification : GASKET TO DRG NO.MCT-1408	C	Nonestab
47) GASKET TO DRG NO MCT 2685[74]()	Specification : GASKET TO DRG NO. MCT-2685	C	Nonestab
48) GASKET TO DRG NO MCT 2684[74]()	Specification : GASKET TO DRG NO. MCT-2684	C	Nonestab
49) GASKET TO DRG NO MCT 2683[74]()	Specification : GASKET TO DRG NO.MCT-2683	C	Nonestab
50) GASKET TO DRG NO MCT 3089 1[74]()	Specification : GASKET TO DRG NO. MCT-3089/1	C	Nonestab
51) EYE SHIELD OPTICAL INSTRUMENT ASPER DRG MCT 3214[74]()	Specification : EYE SHIELD OPTICAL INSTRUMENT ASPER DRG. MCT-3214	C	Nonestab
52) SYNTHETIC RUBBER SHEET 4 MM THICK IND TC 2437 LATEST[21]()	Specification : SYNTHETIC RUBBER SHEET 4.00 MM THICK IND/TC/2437[LATEST]	C	Nonestab
53) SYNTH RUBBER SHEET THICK SMOOTH FINISH BOTH SIDES IND TC 2437 SIZE 300MMX300[21]()	Specification : SYNTH. RUBBER SHEET 0.020" THICK SMOOTH FINISH BOTH SIDES (IND/TC/2437) SIZE.300MMX300	C	Nonestab
54) SYN RUBBER SHEET THICK I N D TC 2437[21]()	Specification : SYN.RUBBER SHEET 0.04"THICK I.N.D/TC/ 2437.	C	Nonestab
55) GASKET TO DRG NO MCT 1414[74]()	Specification : GASKET TO DRG NO.(MCT-1414)	C	Nonestab
56) GASKET TO DRG NO MCT 1412[74]()	Specification : GASKET TO DRG NO- MCT-1412	C	Nonestab
57) GASKET TO DRG NO MCT 1413[74]()	Specification : GASKET TO DRG NO- (MCT-1413)	C	Nonestab
58) GASKET TO DRG NO MCT 1411[74]()	Specification : GASKET TO DRG NO. MCT-1411	C	Nonestab
59) SEAL GASKET TO DRG NO MCT 1417[74]()	Specification : SEAL/GASKET TO DRG NO. (MCT-1417)	C	Nonestab
60) SEAL GASKET TO DRG NO MCT 1416[74]()	Specification : SEAL/GASKET TO DRG NO (MCT-1416)	C	Nonestab
61) EYE SHIELD OPTICAL INSTRUMENT NO 18 MK 1 AS PER DRG NO MCT 795 3[00]()	Specification : EYE SHIELD OPTICAL INSTRUMENT NO.18 MK-1 AS PER DRG.NO.MCT 795/3	C	Nonestab
62) EYE SHEILD OPTICAL INSTRUMENT NO 20 MK 1 MCT 59 2[00]()	Specification : EYE SHEILD OPTICAL INSTRUMENT NO.20 MK-1 MCT-59/2	C	Nonestab
63) BUFFER RUBBER TO DRG NO MCT 489 3[00]()	Specification : BUFFER RUBBER TO DRG.NO. MCT-489/3	C	Nonestab
64) SEAL RUBBER STRIP TO DRG NO MCT 579 1[00]()	Specification : SEAL RUBBER, STRIP TO DRG NO MCT-579/1	C	Nonestab
65) GLAND RUBBER RECTANGULAR TO DRG NO MCT 3229[00]()	Specification : GLAND RUBBER RECTANGULAR TO DRG NO.MCT-3229	C	Nonestab
66) SEAL RUBBER STRIP WINDOW DRG NO MCT 1206[00]()	Specification : SEAL RUBBER STRIP WINDOW DRG.NO MCT-1206	C	Nonestab
67) SEAL RUBBER AS PER DRG NO MCT 1205[00]()	Specification : SEAL RUBBER AS PER DRG NO-MCT-1205	C	Nonestab
68) SEAL RUBBER STRIP TO DRG NO MCT 1198[00]()	Specification : SEAL RUBBER STRIP TO DRG NO.MCT-1198	C	Nonestab
69) SEAL RUBBER STRIP MCT 1207[00]()	Specification : SEAL RUBBER STRIP ,MCT-1207	C	Nonestab
70) EYE GAURD DETACHABLE AS PER DRG NO MCT 1208 2[00]()	Specification : EYE GAURD DETACHABLE AS PER DRG.NO. MCT-1208/2	C	Nonestab
71) SYNTHETIC RUBBER STRIP 11 MM THICK X 12 MM WIDE X 120 MM LONG[21]()	Specification : SYNTHETIC RUBBER STRIP 11 MM THICK X 12 MM WIDE X 120 MM LONG.	C	Nonestab
72) SYN RUBBER SHEET IND TC 2437 L SMOOTH FINISH BOTH SIDE[21]()	Specification : SYN.RUBBER SHEET 2.03 M.M. OR 0.08"THICK IND/TC/2437[L] SMOOTH FINISH BOTH SIDE.	C	Nonestab
73) SYN RUBBER SHEET 3 MM THICK OIL RESISTANT IND TC 2437 L SMOOTH FINISH[21]()	Specification : SYN.RUBBER SHEET 3.00MM THICK, OIL RESISTANT IND/TC/2437.[L] SMOOTH FINISH.	C	Nonestab
74) SYNTHITIC RUBBER SHEET GRADE III TYPE B OF IS 5192 1975[21]()	Specification : SYNTHITIC RUBBER SHEET 0.50 MM THICK X 0.60 MTRS WIDTH NOT LESS. GRADE III,TYPE - B OF IS: 5192-1975	C	Nonestab
75) SYNTHETIC RUBBER SHEET NITRILE BLACK 1 MM THICK SPEC BS 2751 RHD 51 60 BA 3[21]()	Specification : SYNTHETIC RUBBER SHEET NITRILE BLACK 1 MM THICK SPEC. BS-2751 RHD 51-60 BA-3	C	Nonestab
76) SPONZE RUBBER 3 MM THICK OIL RESISTEN IND TC 2437 LATEST[21]()	Specification : SPONZE RUBBER 3.00 MM THICK OIL RESISTEN LENGTH & WIDTH SHOULD NOT BE LESS THAN 12".IND/TC/2437 (LATEST)	C	Nonestab
77) WASHER NON METALIC TO DRG NO MCT 3446[74]()	Specification : WASHER NON METALIC TO DRG NO.MCT-3446	C	Nonestab
78) GASKET RUBBER TO DRG NO MCT 3454[74]()	Specification : GASKET RUBBER TO DRG NO.MCT-3454	C	Nonestab
79) WASHER NON METALLIC TO DRG IRDE 335 73[74]()	Specification : WASHER NON METALLIC TO DRG IRDE-335/73	C	Nonestab
80) SYN WASHER NON METALLIC TO DRG NO IRDE 335 60[74]()	Specification : SYN WASHER NON METALLIC TO DRG NO. IRDE-335/60	C	Nonestab
81) O RING DRG NO MCT 1396[74]()	Specification : "O" RING DRG NO. MCT-1396	C	Nonestab
82) O RING TO DRG NO MCT 1299[00]()	Specification : "O" RING TO DRG NO.(MCT-1299)	C	Nonestab
83) O RING TO DRG NO GF 235151F MCT 825[00]()	Specification : "O" RING TO DRG.NO. GF-235151F (MCT-825)	C	Nonestab
84) CAP OG TO DRG NO MCT 1901 1[00]()	Specification : CAP OG TO DRG NO.MCT-1901/1	C	Nonestab
85) EDGE COVER FOR TEL 84 MM MK III AS PER DRG NO CQA I 793 1[74]()	Specification : EDGE COVER FOR TEL 84 MM MK-III AS PER DRG.NO.CQA(I)-793/1	C	Nonestab
86) EYE GUARD TO DRG NO CQA I 793 2 FOR TELE 84MM MK III[74]()	Specification : EYE GUARD TO DRG.NO.CQA(I)-793/2 FOR TELE 84MM MK-III	C	Nonestab
87) EYE GUARD DETACHABLE AS PER DRG NO MCT 441 2[00]()	Specification : EYE GUARD DETACHABLE AS PER DRG. NO.MCT-441/2	C	Nonestab
88) EYE GUARD TO DRG NO MCT 821[00]()	Specification : EYE GUARD TO DRG NO. MCT-821	C	Nonestab
89) EYE GUARD TO DRG NO CWC 180 78[74]()	Specification : EYE GUARD TO DRG NO.CWC/180/78	C	Nonestab
90) FRONT COVER DRG NO MCT 1301 1[00]()	Specification : FRONT COVER DRG. NO. MCT-1301/1	C	Nonestab
91) GASKET TO DRG NO CQA I 793 36[74]()	Specification : GASKET TO DRG.NO.CQA(I)-793/36.	C	Nonestab
92) PLATE COVER GASKET IRDE 1274 52 SHT 3 DRG NO MCT 1318[00]()	Specification : PLATE COVER GASKET ( IRDE-1274/52,SHT.3) DRG. NO. MCT-1318	C	Nonestab
93) GLAND TO DRG NO MCT 1896 1[00]()	Specification : GLAND TO DRG. NO. MCT-1896/1 MCT-1896/1	C	Nonestab
94) GLAND TO DRG NO MCT 1895 2[00]()	Specification : GLAND TO DRG NO. MCT-1895/2	C	Nonestab
95) GLAND TO DRG NO MCT 1900 1[00]()	Specification : GLAND TO DRG. NO. MCT-1900/1	C	Nonestab
96) NOSE PAD TO DRG NO MCT 1913[74]()	Specification : NOSE PAD TO DRG NO. MCT-1913	C	Nonestab
97) O RING 18X1 DRG NO MCT 2419[74]()	Specification : O RING 18X1 DRG.NO.MCT-2419	C	Nonestab
98) O RING NO DRG NO MCT 2306[74]()	Specification : O RING NO.5.1 X 1.6, DRG.NO.MCT-2306	C	Nonestab
99) O RING TO DRG NO GF 235150 F MCT 824[00]()	Specification : "O"RING TO DRG NO. GF-235150 F (MCT-824)	C	Nonestab
100) O RING TO DRG NO MCT 826 GF 235152[00]()	Specification : O RING TO DRG. NO. MCT-826 (GF-235152)	C	Nonestab
101) O RING TO DRG NO IRDE 1274 7 MCT 1296[00]()	Specification : "O" RING TO DRG NO.IRDE-1274/7,(MCT-1296	C	Nonestab
102) OBJECTIVE COVER TO DRG NO GF 230138 MCT 822[00]()	Specification : OBJECTIVE COVER TO DRG NO. GF-230138 MCT-822	C	Nonestab
103) PAD CUSHIONING NOSE AS PER DRG NO MCT 1898 1[00]()	Specification : PAD CUSHIONING (NOSE) AS PER DRG.NO.MCT-1898/1	C	Nonestab
104) RETAINER PACKING TO DRG NO MCT 2271[00]()	Specification : RETAINER PACKING TO DRG. NO. MCT-2271.	C	Nonestab
105) RING EYE PIECE IRDE 1274 10 DRG NO MCT 1297 1[00]()	Specification : RING EYE PIECE ( IRDE-1274/10 ) DRG. NO. MCT-1297/1	C	Nonestab
106) RUBBER MOULDED SEAL TO DRG NO CIA FC 2434 MCT 488 2[00]()	Specification : RUBBER MOULDED SEAL TO DRG NO CIA(FC)- 2434 MCT-488/2	C	Nonestab
107) RUBBER WASHER TO DRG NO MCT 1055 GF 215104[00]()	Specification : RUBBER WASHER TO DRG NO, MCT-1055 GF-215104	C	Nonestab
108) WASHER FLAT MCT1894 1[00]()	Specification : WASHER FLAT MCT1894/1	C	Nonestab
109) WASHER TO DRG NO IRDE 1274 2 MCT 1313[00]()	Specification : WASHER TO DRG NO,IRDE-1274/2(MCT-1313)	C	Nonestab
110) WASHER TO DRG NO IRDE 1274 19 MCT 1311 WASHER FOR SOCKET[00]()	Specification : WASHER TO DRG NO.IRDE-1274/19 MCT-1311 (WASHER FOR SOCKET)	C	Nonestab
111) WASHER TODRG NO IRDE 1274 40 MCT 1309[00]()	Specification : WASHER TODRG NO.IRDE-1274/40.(MCT-1309)	C	Nonestab
112) WASHER TO DRG NO MCT 1310 1[00]()	Specification : WASHER TO DRG NO .MCT-1310/1	C	Nonestab
113) WASHER DRG NO IRDE 1274 25 MCT 1312 1[00]()	Specification : WASHER DRG NO.IRDE-1274/25,MCT-1312/1	C	Nonestab
114) WASHER TO DRG NO MCT 1315[00]()	Specification : WASHER TO DRG NO. MCT-1315	C	Nonestab
115) ORING AS PER DRG NO MCT 1394[74]()	Specification : O-RING AS PER DRG.NO.MCT-1394	C	Nonestab

Category : p
Grade : Grade III
Size : S

923

ASHOKA MOULDERS PVT. LTD.
6A, NICCO HOUSE 2, HARE STREET KOLKATA West Bengal
PIN1 : 700001
Phone No. : 22489876

AACCA1002F

Download

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021 Description : STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021()	Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.	R	Nonestab

Category : s
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) STEEL STRIP 82 X 0 8MM BS1449 IS513DD lf 0121060266 Description : STEEL STRIP 82 X 0 8MM BS1449 IS513DD lf 0121060266()	Specification : STEEL STRIP 82+/-0.5 MM WIDE X 0.8+/-0.03 MM THICK TO SPECN:IS-513-TYPE-DD OR BS-1449-PT-I-CS-3 SEC-2.	R	Nonestab
2) SPRING 5209544 FOR HEAT 551 LF 9911357927 Description : SPRING 5209544 FOR HEAT 551 LF 9911357927()	Specification : SPRING TO DRG NO.301100269.	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) PHENOLIC MOULDING OF BODY CONTACT LF 9911356304 Description : PHENOLIC MOULDING OF BODY CONTACT LF 9911356304()	Specification : PHENOLIC MOULDING FOR BODY & CONTACT TO DRG NO:OST-B84-410- 78 MOULDED COMPONENTS TO SATISFY PARAMETER OF TESTING ATSHEET NO: 4,5 & 6 OF OST-B84-410:78 MOULDING MATERIAL TOSPECN:- SP-16 OF IPL.	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) BLANK FOR AFT CLOSURE 751 LF 9911358748 Description : BLANK FOR AFT CLOSURE 751 LF 9911358748()	Specification : BLANK FOR AFT CLOSURE 751 TO SPEC NO 00814599 MATERIAL EN-AW 7075 TO DRG NO.304200410 TO PART NO.4103408	R	Nonestab
2) BLANK FOR PLUNGER FOR 751 LF 9911358749 Description : BLANK FOR PLUNGER FOR 751 LF 9911358749()	Specification : BLANK FOR PLUNGER FOR 751 TO SPEC NO. 00814596 MATERIAL EN-AW 7075 TO DRG NO. 304101470 TO PART NO 06417888	R	Nonestab
3) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750()	Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) VALVE PART NO 404038806 LF 9911358407 Description : VALVE PART NO 404038806 LF 9911358407()	Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547	R	Nonestab
2) MANTLE PART NO 5211891 LF 9911358398 Description : MANTLE PART NO 5211891 LF 9911358398()	Specification : MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SUPPORTRING RING PART NO 5211870 LF 9911358417 Description : SUPPORTRING RING PART NO 5211870 LF 9911358417()	Specification : SUPPORTING RING PART NO. 5211870 TO OEM DRG.NO.304094939/ TRD.DRG.NO 2.2.2371	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) WAVE SPRING WASHER 2013999902 Description : WAVE SPRING WASHER 2013999902()	Specification : WAVE SPRING WASHER PART NO 6414691 TO OEM DRG NO 304069069/TRD DRG NO 2.2.2541	R	Nonestab

Category : p
Grade : 3
Size : S

1) Gun and Shell Factory

[ENR Registration] Debarred

Name	Specification	Use	Status
1) SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B Description : SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B()	Specification : SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B	C	Estab
2) FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E Description : FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E()	Specification : AS PER DRG	C	Estab
3) BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011 Description : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011()	Specification : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011	C	Estab
4) FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY) Description : FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY)()	Specification : FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY)	C	Estab
5) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C Description : PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C()	Specification : DRG. NO. SK-8345/C	C	Estab
6) CAP TO SK NO OTF PG 002 IN FC Description : CAP TO SK NO OTF PG 002 IN FC()	Specification : AS PER DRG.	C	Estab
7) Disc to Part No QX 336 for Fuze 162 Mk-8/Mk-9 Description : Disc to Part No QX 336 for Fuze 162 Mk-8/Mk-9()	Specification : AS PER DRAWING	C	Estab
8) STOP DETENT TO DRG NO IQX 1002 Description : STOP DETENT TO DRG NO IQX 1002()	Specification : AS PER DRG.	C	Estab

Category : dp
Grade : 2
Size : S

1) Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) COPPER STRIP TO SPECN IS14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS191 2007 SIZE 0 POINT18 MINUS 0 POINT 02 MM THICK AND 22 PLUS 0 POINT 5 MM WIDE Description : COPPER STRIP TO SPECN IS14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS191 2007 SIZE 0 POINT18 MINUS 0 POINT 02 MM THICK AND 22 PLUS 0 POINT 5 MM WIDE()	Specification : COPPER STRIP TO SPECN.IS:14811:2000. CONDITION HD GRADE CU CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE	R	Estab

Category : dp
Grade : 3
Size : S

1) Metal and Steel Factory

[ENR Registration]

Name	Specification	Use	Status
1) HOT ROLLED HEAT TREATED PEELED OR MACHINED AND UT PASSED STEEL ROD Description : HOT ROLLED HEAT TREATED PEELED OR MACHINED AND UT PASSED STEEL ROD()	Specification : HOT ROLLED HEAT TREATED PEELED/MACHINED & UT PASSED STEEL ROD TO SIZE 71+/-0.1MM DIA X 2-3 MTR LENGTH MAINTAINING ECCENTRICITY/BEND NOT MORE THAN 0.5 MM IN 1000 MM LENGTH TO SPECN GOST B 19032-73 STEEL GRADE II IOA FOR MAKING OF STEEL BLA	P	Estab

Category : s
Grade : 3
Size : O

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SLIPPING RING PART NO 5212095 LF 9911358418 Description : SLIPPING RING PART NO 5212095 LF 9911358418()	Specification : SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Kanpur

[ENR Registration]

Name	Specification	Use	Status
1) Pipe Disc Description : Pipe Disc()	Specification : Drg. No. SK-9366	C	Estab
2) FORGED PROOF MACHINED BLANK FIN CYLINDER Description : FORGED PROOF MACHINED BLANK FIN CYLINDER()	Specification : FORGED PROOF MACHINED BLANK FIN CYLINDER TO DRG. NO. SK- 8928/D	C	Estab

Category : p
Grade : 2
Size : S

1) Gun and Shell Factory

[Deemed Registration] Debarred

Name	Specification	Use	Status
1) CAP QX 438 WITHOUT SURFACE TREATMENT and EMBOSSING DC NO 37326 A Description : CAP QX 438 WITHOUT SURFACE TREATMENT and EMBOSSING DC NO 37326 A()	Specification : CAP QX-438 WITHOUT SURFACE TREATMENT & EMBOSSING DC NO.37326-A	C	Estab

Category : p
Grade : 3
Size : S

924

UNITED STEEL & ALLIED INDUSTRIES
3-E/10, SHREE NAV DURGA BHAWAN, JHANDEWALAN EXTENSION NEW DELHI Delhi
PIN1 : 110055
Phone No. : 23619240
GSTIN : 06AAAFU1329G1ZI

DELU02524E

Download

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6571551172 BOX B-7 A DRG. ISV -505A DC(I)34047-[65]()	Specification : SPECN NO. IA 1169	C	Nonestab
2) 6141156496 AMN.CONTAINER BOX D4C DRG.ISV 540A[61]()	Specification : SPECN. NO. IA-1163	C	Nonestab
3) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A[65]()	Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006.	C	Nonestab
4) 6570963318 BOX C 52 A STEEL DRG NO ISV 573A[65]()	Specification : AMMUNITION CONTAINER BOX C 52-A (STEEL) FOR PACKING OF 125 MM HEAT TO DRG.PT.NO.ISV-573-A DC NO.37051-A DT 05-05-2006 .	C	Estab

Category : p
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6572328900 BOX STEEL 412/S-4 RKT 68MM HE/PRAC[65]()	Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)	C	Nonestab
2) 6570016000 BOX H 50 STEEL[65]()	Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987	C	Nonestab
3) 6570850706 BOX B7A "OLIEVE GREEN"[65]()	Specification : SPECN. NO. IA 1169	C	Nonestab
4) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()	Specification : SPECN. NO. IA 1169	C	Nonestab
5) 6571341952 CARRIER 13 A (OG), ISV 488-A[65]()	Specification : SPECN.NO. IA 1169	C	Nonestab
6) 6571442459 CARRIER 13A (BG) TO ISV 488A[65]()	Specification : SPECN. NO. IA 1169	C	Estab
7) 6519000001 BOX M-104 MKI SV 22A(FZ 117MK 20)[65]()	Specification : AMMUNITION CONTAINER BOX M-104 MK-1 (STEEL) DES.REF.DD(L) 11325(SHEET-1& 2), DRG. PART NO.SV-22A DC 35994-A DT.12.8.95	C	Estab
8) 6570960402 BOX C 51 A AMMN. CONTAINER[65]()	Specification : AMMUNITION CONTAINER BOX C 51-A (STEEL) FOR PACKING OF 125 MM HE TO DRG.PT.NO.ISV-572-A,DC NO.37051-A, DT.05.05.2006.	C	Nonestab
9) 6570153559 BOX C44A OG-(STEEL) CQA(A) AMN/ 2644[65]()	Specification : SPECN.NO.1169(N) ISC NO.220 OF IS:5-1994 (4TH REVISION) (AMDT.1) (REAFF.2000)	C	Nonestab
10) 6570453558 BOX C-43A (STL) "OG" AMMN.CONTAINER[65]()	Specification : SPECN.NO. IA 1169(N) ISC.NO. 220 0F IS-5-1994 (FOURTH REVISION) (AMDT NO.1) (REAFFIRMED- 2000)	C	Nonestab
11) 6570610080 BOX P60 MK 2 L[65]()	Specification : AMN. CONT. BOX P 60 MARK 2/L TO DRG. PART NO. SV 24 A DC NO. 35530- A.	C	Estab
12) 6432300008 MS PLATE 3MM TH PHOS ERA[64]()	Specification : IS:2062-1994	C	Estab

Category : p
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) AMMUNITION CONTAINER CYLINDER NO. 274 MK 1/L EMPTY, DRG NO.DD(L) 6432(I)/1 SPECN. IA 1163()	IA 1163	C	Not Estab.
2) AMMUNITION CONTAINER (BOX) H 2 A/L STEEL, DES. REF. CIA/AMMN/468,PT. NO. ISV 296-A SPECN. IA 1169()	IA 1169	C	Estab.
3) AMMUNITION CONTAINER BOX B-9 A STEEL TO DESIGNER REF ARDE 2174 PT. NO. ISV 553A SPECN. IA 1169()	IA 1169	C	Estab.
4) CYLINDER NO. 309 MK 2, DRG NO. IA 414/1 SPECN. IA 1163()	IA 1163	C	Estab.
5) BOX STEEL NO. S 6 MK1 TO DRG.NO. ARDE 2225 SHEET NO.3()	DRG.NO. ARDE 2225 SHEET NO.3	C	Estab.
6) CARRIER AMMN 13A STEEL TO DES.REF NO CIA/AMN/2198 PT NO ISV 488A SHT-1 SPECN. IA 1169()	IA 1169	C	Estab.
7) BOX NO 582 MK1/L TIN PLATE TO DESGN.REF NO. D7(L) 822/G/169 SPECN. IA 1163()	IA 1163	C	Estab.

Category : P
Grade : III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) BOX C 28 A STEEL[65]()	Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A	C	Nonestab
2) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()	Specification : IA 1169	C	Nonestab
3) BOX G 70 MK1(STEEL)OLIVE GREEN.[65]()	Specification : IA 1169	C	Nonestab
4) BOX B 184 MK 1 W/O SEPARATOR[65]()	Specification : IA 1169	C	Nonestab
5) BOX 682 MKI W/O LINER IA 896/1[65]()	Specification : IA 1163	C	Nonestab
6) BOX NO.428 MK.1[65]()	Specification : DRG. NO. D.D.(L) 18704	C	Nonestab
7) CYLINDER NO 224 MK 5[65]()	Specification : DRG. NO. ARM 1478 A4	C	Nonestab
8) CYLINDER NO 80 A MK[65]()	Specification : IA-1163	C	Nonestab
9) CYLINDER NO. 293 MK-3 AFK-SK-281-05[65]()	Specification : DRG.NO. AFK/SK-281-05	C	Nonestab

Category : P
Grade : III
Size :

1) Ordnance Factory Khamaria

[Deemed Registration]

Name	Specification	Use	Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000) Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()	Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]()	Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL	C	Estab

Category : p
Grade : Grade III
Size : S

1) Gun Carriage Factory

[ENR Registration]

Name	Specification	Use	Status
1) Bracket B1& B2 Description : Bracket B1& B2()	Specification : AS/ GCF/SIZE/SPECIFICATION/ IS	C	Estab
2) Bracket Description : Bracket()	Specification : AS PER GCF /DRG/SPECN/IS/BS	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Chanda

[ENR Registration]

Name	Specification	Use	Status
1) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A Description : 6576773398 AMN CONTAINER BOX C 53A ISV 574 A()	Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006.	R	Estab
2) 6141156496 AMN.CONTAINER BOX D4C DRG.ISV 540A Description : 6141156496 AMN.CONTAINER BOX D4C DRG.ISV 540A()	Specification : SPECN. NO. IA-1163	R	Estab
3) 6570960402 BOX C 51 A AMMN. CONTAINER Description : 6570960402 BOX C 51 A AMMN. CONTAINER()	Specification : AMMUNITION CONTAINER BOX C 51-A (STEEL) FOR PACKING OF 125 MM HE TO DRG.PT.NO.ISV-572-A,DC NO.37051-A, DT.05.05.2006.	R	Estab
4) 6570963318 BOX C 52 A STEEL DRG NO ISV 573A Description : 6570963318 BOX C 52 A STEEL DRG NO ISV 573A()	Specification : AMMUNITION CONTAINER BOX C 52-A (STEEL) FOR PACKING OF 125 MM HEAT TO DRG.PT.NO.ISV-573-A DC NO.37051-A DT 05-05-2006 .	R	Estab
5) 6570453558 BOX C-43A (STL) "OG" AMMN.CONTAINER Description : 6570453558 BOX C-43A (STL) "OG" AMMN.CONTAINER()	Specification : SPECN.NO. IA 1169(N) ISC.NO. 220 0F IS-5-1994 (FOURTH REVISION) (AMDT NO.1) (REAFFIRMED- 2000)	R	Estab
6) 6570153559 BOX C44A OG-(STEEL) CQA(A) AMN/ 2644 Description : 6570153559 BOX C44A OG-(STEEL) CQA(A) AMN/ 2644()	Specification : SPECN.NO.1169(N) ISC NO.220 OF IS:5-1994 (4TH REVISION) (AMDT.1) (REAFF.2000)	R	Estab
7) 6570016000 BOX H 50 STEEL Description : 6570016000 BOX H 50 STEEL()	Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987	R	Estab
8) 6519000001 BOX M-104 MKI SV 22A(FZ 117MK 20) Description : 6519000001 BOX M-104 MKI SV 22A(FZ 117MK 20)()	Specification : AMMUNITION CONTAINER BOX M-104 MK-1 (STEEL) DES.REF.DD(L) 11325(SHEET-1& 2), DRG. PART NO.SV-22A DC 35994-A DT.12.8.95	R	Estab
9) 6572328900 BOX STEEL 412/S-4 RKT 68MM HE/PRAC Description : 6572328900 BOX STEEL 412/S-4 RKT 68MM HE/PRAC()	Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)	R	Estab
10) 6571442459 CARRIER 13A (BG) TO ISV 488A Description : 6571442459 CARRIER 13A (BG) TO ISV 488A()	Specification : SPECN. NO. IA 1169	R	Estab
11) 6571341952 CARRIER 13 A (OG), ISV 488-A Description : 6571341952 CARRIER 13 A (OG), ISV 488-A()	Specification : SPECN.NO. IA 1169	R	Estab
12) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM Description : 6570950402 CONTAINER 3RK 33 METAL FOR 125MM()	Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS 1.BODY DET. NO. 010 2. COVER DET.NO. 020 3.BOLT DET. NO. 030 4. FORK DET.NO 005	R	Estab
13) 6432300008 MS PLATE 3MM TH PHOS ERA Description : 6432300008 MS PLATE 3MM TH PHOS ERA()	Specification : IS:2062-1994	R	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Bhandara

[ENR Registration]

Name	Specification	Use	Status
1) BOLT OF SIZE M 16 X 2P X 50 MM Description : BOLT OF SIZE M 16 X 2P X 50 MM()	Specification : TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP)	R	Estab
2) BOX C-26 A (SER) Description : BOX C-26 A (SER)()	Specification : WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A	R	Estab
3) BOX C 18A STEEL Description : BOX C 18A STEEL()	Specification : SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A	R	Estab
4) BOX-C 27-A (SER)TIN PLATE Description : BOX-C 27-A (SER)TIN PLATE()	Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A	R	Estab
5) BOX G 70 STEEL Description : BOX G 70 STEEL()	Specification : AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.	R	Estab
6) Cylinder 12 A Steel for Ammunition , Container Assembly 117 A Description : Cylinder 12 A Steel for Ammunition , Container Assembly 117 A()	Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.	R	Estab
7) CYLINDER 443 MK 1/L Description : CYLINDER 443 MK 1/L()	Specification : GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO	R	Estab
8) END WASHER WHITE Description : END WASHER WHITE()	Specification : WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83	R	Estab
9) M S PLATE SZ 3 MM PHOSPATED Description : M S PLATE SZ 3 MM PHOSPATED()	Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3	R	Estab
10) Metallic Container For Charge 9 Description : Metallic Container For Charge 9()	Specification : Drg No.4085561 DC 35637 CQA AMMN OF Dtd17.02.93 LEAK TEST AS PER SPECN. IA-1169(N), DC-35707-A DT.05.5.94	R	Estab
11) METALLIC CONTAINER -M4A2 (SER) Description : METALLIC CONTAINER -M4A2 (SER)()	Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.	R	Estab
12) STD CASSETTE CONTAINER Description : STD CASSETTE CONTAINER()	Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8	R	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Bolangir

[ENR Registration]

Name	Specification	Use	Status
1) BOX H-60 MK1 (INDIA) Description : BOX H-60 MK1 (INDIA)()	Specification : DRG. NO. ARM 1253 D-1, REV. NO.-6 DT. 27.06.96, DRG LIST NO. ARM 1253 SHEET-1 REVISION NO. 7 DT 01.08.96 SHEET-2 REV-5 DT. 31.07.96	C	Estab
2) AMMN CONTAINER BOX M 104 MK-1 Description : AMMN CONTAINER BOX M 104 MK-1()	Specification : AMMN CONTAINER BOX M 104 MK-1 FOR FUZE 117 MK-20 DESIGNER REF DD(L)11325 PART NO-SV22A SHEET 1- DC-35994-A SHEET-2 DC-37227-A DT.28.07.09	C	Estab

Category : p
Grade : 3
Size : S

925

VANDANA TRADING COMPANY
27 BRABOURNE ROAD, 3RD FLOOR, R.N -313, NARAYANI BUILDING BRABOURNE ROAD KOLKATA West Bengal
PIN1 : 700001
Phone No. : 22623797
GSTIN : 19AAXPL3149A1ZI

CALV02312C

Download

1) Opto Electronic Factory

Name	Specification	Use	Status
1) LF 7440200730 SENSOR TYPE 15D 32 FOR STABILIZER[74]()	Specification : 7440200730 SENSOR TYPE 15D-32- FOR STABILIZER 1G46 TO DRG.NO 6S2320016-2TU	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) Russian Connector()	As per specification	R	Estab.

Category : S
Grade : III
Size : S

926

Raajratna Ventures Ltd
Phoenix 1402 14th floor Vijay cross raods to commerce six roads Navrangpura Ahmedabad-390009 Gujarat, India.Tel: +91-79-2756 1915 / 16 / 17 Ashram road Ahmedabad Gujarat
PIN1 : 380014
Phone No. : 27561915
GSTIN : 24AACCR7873B1ZG

AHMR03159C

Download

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6334100726 STAINLESS STEE NUT M4 FOR PINKA RKT[63]()	Specification : IS-1367	C	Nonestab

Category :
Grade : Grade III
Size : M

927

ACE INOTEC MANUFACTURING PRIVATE LIMITED
Plot No #465, 4th Phase Peenya Industrial L Area Plot No #465, 4th Phase Peenya Industrial L Area Bangalore Karnataka
PIN1 : 560058
Phone No. : 8722900333
GSTIN : 29AALCA6168R1ZN

AALCA6168R

Download

1) Gun and Shell Factory

Name	Specification	Use	Status
1) HAMMER CTM 0174[70]()	Specification : HAMMER IN F/C AS PER DRG. NO. CTM-0174	C	Nonestab
2) RECEIVER CTM 0178 1 TO CTM 0178 2[70]()	Specification : RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2	C	Nonestab
3) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) Picatiny Rail FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()	Specification : PICATINY RAIL TO DRG NO. AKC-08/1/2* FOR CARBINE 5.56MM IN FINISHED CONDITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) MOUNTING RAIL for JVPC[70]()	Specification : MOUNTING RAIL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Link for JVPC[7012470234]()	Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Trigger Rear with Machining Route[70]()	Specification : Trigger Rear with Machining Route. Drg.No.0204-03-02-02-18-013-00DC	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Blade Foresight for Revolver MK IV[70]()	Specification : Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Threaded Piston Extension for CQB DRG No 1901 01 01 00 03 002 00DC[70]()	Specification : Threaded Piston Extension for CQB DRG. No. 1901 01 01 00 03 002 00DC. Item code (7012670015)	C	Nonestab
2) ROD COCKING FOR JVPC[70]()	Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462)	C	Nonestab
3) Barrel Extension Blank up to Stage V for JVPC[70]()	Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Rod Rear Spring Recoil for JVPC[70]()	Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA	C	Nonestab
2) PISTON FOR JVPC ALFA[70]()	Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA	C	Nonestab

Category :
Grade : Grade III
Size : S

928

BISHAMBER DAYAL ONKAR PERSAD
4472, Dau Bazar, Cloth Market, Delhi Delhi
PIN1 : 110006
Phone No. : 23961478
GSTIN : 07AAAFB5307M1ZK

DELB08229E

Download

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) EYELETS VARIOUS ALUMINIUM & BRASS()	AS PER SPECIFICATION	C	ESTAB
2) UNIVERSAL MEMBER()	AS PER SPECIFICATION	C	ESTAB
3) ROOF POLE()	AS PER SPECIFICATION	C	ESTAB
4) U-PIN()	AS PER SPECIFICATION	C	ESTAB
5) PIN TENT ANGLE IRON()	AS PER SPECIFICATION	C	NOT ESTAB
6) PIN CARBON STEEL SMALL()	AS PER SPECIFICATION	C	NOT ESTAB
7) CLIP IRON()	AS PER SPECIFICATION	C	ESTAB
8) HOOK IRON()	AS PER SPECIFICATION	C	ESTAB
9) RUNNER LT.WT.ALUMINIUM()	AS PER SPECIFICATION	C	ESTAB
10) METALLIC BUCKLE()	AS PER SPECIFICATION	C	ESTAB
11) BUTTONS & FASTNERS()	AS PER SPECIFICATION	C	ESTAB
12) TENT DEES VARIOUS()	AS PER SPECIFICATION	C	ESTAB
13) WING NUT WITH BRACELET()	AS PER SPECIFICATION	C	NOT ESTAB
14) HEX BOLT WITH LOOP()	AS PER SPECIFICATION	C	ESTAB
15) METAL HOOK & CLIP SS()	AS PER SPECIFICATION	C	ESTAB
16) PLASTIC TOGGLE & MOULDED GARMENT ACCESSORIES()	AS PER SPECIFICATION	C	ESTAB
17) TENT RING I.G.()	AS PER SPECIFICATION	C	ESTAB

Category : DDP,DP
Grade : I,II
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Shoulder Pad Non Woven Polyester[21]()	Specification : As per Appendix ' E3' of Specification No. IAFS 1042:2017	R	Nonestab

Category : p
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Cover Plastic Coated Nylon Fabric Sz-900x600x0.1MM[21]()	Specification : As per appendix 'H' of Specification No. IAFS 1042:2017	R	Nonestab

Category : p
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) HDPE Bag White size 75 cm X 50 cm X 100 cm[21]()	Specification : IS:11652-2000 HDPE Bag white size 75 cm X 50 cm X 100 cm	R	Estab

Category : p
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) MARKING LABEL FOR BLANKET SUPERIOR OG[21]()	Specification : TECH. SECTN NO. TS/R&D/BLANKET HOSPITAL DT. 23.02.12 MARKING LABEL/BLANKET SUPERIOR OG/2012. AS PER ANNEXURE-III (PMS/SIZE/WASH.LABEL) AS PER ANNEXURE 'B' OF CQA(T&C)QAI NO. CQA T&C/QAI/99 TC-11	R	Estab

Category : p
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) MARKING LABEL FOR BLANKET SUPERIOR OG[21]()	Specification : TECH. SECTN NO. TS/R&D/BLANKET HOSPITAL DT. 23.02.12 MARKING LABEL/BLANKET SUPERIOR OG/2012. AS PER ANNEXURE-III (PMS/SIZE/WASH.LABEL) AS PER ANNEXURE 'B' OF CQA(T&C)QAI NO. CQA T&C/QAI/99 TC-11	R	Estab

Category : p
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) MARKING LABEL FOR BLANKET SUPERIOR OG[21]()	Specification : TECH. SECTN NO. TS/R&D/BLANKET HOSPITAL DT. 23.02.12 MARKING LABEL/BLANKET SUPERIOR OG/2012. AS PER ANNEXURE-III (PMS/SIZE/WASH.LABEL) AS PER ANNEXURE 'B' OF CQA(T&C)QAI NO. CQA T&C/QAI/99 TC-11	R	Estab

Category : p
Grade : Grade III
Size : S

929

East West Tanners
98/34, Suite No.4 Nazir Bagh Kanpur Uttar Pradesh
PIN1 : 208001
Phone No. : 2970606
GSTIN : 09AAFPU6789H1ZU

KNEP01459D

Download

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Bag Kit Universal (Mark-II)[21]()	Specification : SPCN.-S/2532/Bag Kit Universal OG/TC-6(a)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF JCD AND TCD IAL 250 GSM IN SET[17]()	Specification : OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF SUIT WINTER[21]()	Specification : AS PER RELEVANT CLAUSE OF SPECIFICATION IAFS: 01042:2017 -OCF, SHAHAJAHANPUR	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Smock Denison[21]()	Specification : Fabrication of Smock Denison Spcn: IND/TC/4675 As per relevant clause of specification As per relevant clause of specification	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()	Specification : Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of coat Extreme Cold Climate[21]()	Specification : IND/TC/4587 (d) & Approved samples	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012[21]()	Specification : IND/TC/4552 (M) & Approved Sample	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF JCD AND TCD IAL 220 GSM IN SET[17]()	Specification : OCFAv/GARMENT/001(c)AND OCFAv/GARMENT/002(c) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 220 GSM INSET	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]()	Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample	E	Estab
2) Fab of Trousers Wind Cheater[21]()	Specification : Fab. of Trousers Wind Cheater. As per Specification No. IND/TC/4678	R	Estab
3) Fabrication of Ground Sheet TPO OG[21]()	Specification : Fabrication of Ground Sheet TPO OG Specification - JSS 8305-35:2014	R	Estab
4) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()	Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.	E	Estab
5) FABRICATION OF BAG WATER PROOF[21]()	Specification : FABRICATION OF BAG WATER PROOF AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.	E	Estab
6) FABRICATION OF COAT ECC IMP VER[21]()	Specification : FABRICATION OF COAT ECC IMP VER FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Jacket Wind Cheater[21]()	Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF ECAD PARA COMPLETE WITH SPECIAL MACHINE[21]()	Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33 ) POLYESTER AND COTTON AND 100% POLYESTER TAPE COMPLETE WITH PACK. WHERE SPECIAL MACHINE (DOUBLE NEEDLE STITCHING MACHINE, FOUR NEEDLE STITCHING MACHINE AND ZIGZAG MAC	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Shirt Plain weave PV Dope Dyed OG[21]()	Specification : IND/TC/4698(b)	R	Estab
2) Fabrication of Trouser Plain weave PV Dope Dyed OG[21]()	Specification : IND/TC/4630(m)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()	Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED) SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE	E	Estab
2) Fabrication of Cap Glacier[21]()	Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.	E	Estab
3) COMPLETE SUB ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP VER WITH ALL INPUT MATERIAL AND FABRICATION OF WIND CHEATER[21]()	Specification : COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANN	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) SUB ASSEMBLY OF WIND CHEATER FABRICATION WITH ALL INPUT MATERIAL FABRIC AND GARNITURE MATERIAL EXCEPT PLASTIC SLIDE FASTENERS[21]()	Specification : Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with a	E	Estab

Category :
Grade : Grade III
Size : S

930

SHIVA TECH ENGINEERING
Sr no 59/1 plot no 3 Chavisawadi Charholi sai Industrial Estate pune Maharashtra
PIN1 : 412105
Phone No. : 9764881012
GSTIN : 27ALKPG5467G1ZV

PNES29472C

Download

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) TAIL UNIT 1A FOR BOMB 81 MM[60]()	Specification : CQA(A)2308	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7[60]()	Specification : CQA(A) 2324	C	Nonestab

Category :
Grade : Grade III
Size : S

931

NATIONAL TOOLS INDUSTRIES
125, EAST KAMALAPUR, DUM DUM KOLKATA WB
PIN1 : 700028
Phone No. : 033-25798151
GSTIN : 19AHBPD7808F1ZI

AHBPD7808F

Download

1) Small Arms Factory

Name	Specification	Use	Status
1) BAYONET 1A FOR SMALL ARMS()	AS PER DRAWING	C	Not Estab.
2) BIPOD ASSEMBLY FOR SMALL ARMS()	AS PER DRAWING	C	Not Estab.
3) SEAR FOR SMALL ARMS()	As PER DRAWING	C	Not Estab.
4) TRIGGER ASSEMBLY FOR SMALL ARMS()	AS PER DRAWING	C	Not Estab.
5) SEAR SAFETY FOR SMALL ARMS()	AS PER DRAWING	C	Not Estab.
6) BUTT ASSEMBLY TO DRG NO. 1005-000835 FOR 9MM CARBINE()	AS PER DRG.	C	Non Established

Category : P
Grade : III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) SEAR FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	C	Estab
2) SEAR SAFETY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	C	Estab
3) BIPOD ASSEMBLY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	C	Estab
4) TRIGGER ASSEMBLY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	C	Estab
5) BAYONET 1A FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	C	Estab
6) BUTT ASSY FOR CARBINE 9MM[70]()	Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1	C	Estab
7) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]()	Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided	C	Estab
8) BIPOD ASSEMBLY FOR LMG 5 56MM[70]()	Specification : BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12	C	Estab
9) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56[70]()	Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)	C	Estab
10) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)[70]()	Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)	C	Estab
11) Cradle Sear IN Finished Condition[70]()	Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07	C	Estab
12) Hand Guard Assembly for JVPC[70]()	Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw	C	Estab

Category : P
Grade : III
Size :

1) Small Arms Factory

Name	Specification	Use	Status
1) SEAR FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
2) SEAR SAFETY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
3) BIPOD ASSEMBLY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
4) TRIGGER ASSEMBLY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
5) BAYONET 1A FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
6) BUTT ASSY FOR CARBINE 9MM[70]()	Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1	C	Estab
7) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]()	Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided	C	Estab
8) BIPOD ASSEMBLY FOR LMG 5 56MM[70]()	Specification : BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12	C	Estab
9) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56[70]()	Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)	C	Estab
10) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)[70]()	Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)	C	Estab
11) Cradle Sear IN Finished Condition[70]()	Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07	C	Estab
12) Magazine Assy with NI PTFE Coated for JVPC[70]()	Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD	C	Estab

Category : P
Grade : III
Size :

1) Small Arms Factory

Name	Specification	Use	Status
1) SEAR FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
2) SEAR SAFETY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
3) BIPOD ASSEMBLY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
4) TRIGGER ASSEMBLY FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
5) BAYONET 1A FOR SMALL ARMS[70]()	Specification : AS PER DRAWING	R	Estab
6) BUTT ASSY FOR CARBINE 9MM[70]()	Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1	C	Estab
7) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]()	Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided	C	Estab
8) BIPOD ASSEMBLY FOR LMG 5 56MM[70]()	Specification : BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12	C	Estab
9) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56[70]()	Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)	C	Estab
10) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)[70]()	Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)	C	Estab
11) Cradle Sear IN Finished Condition[70]()	Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07	C	Estab
12) BOX MAGAZINE[14]()	Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08	C	Estab
13) HANDLE ASSEMBLY Drg. No SK 4407*[72]()	Specification : HANDLE ASSEMBLY TO DRG.NO-SK 4407*	C	Estab

Category : P
Grade : III
Size :

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BAYONET K9030[70]()	Specification : BAYONET K9030	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Fore End assembly SK 6647 TE[70]()	Specification : Fore End assembly SK -6647/ TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Pistol Grip Assembly SK 6646 TE[70]()	Specification : Pistol Grip Assembly SK-6646/ TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) Sear Drg. No. ARDE SK 2689/239 Description : Sear Drg. No. ARDE SK 2689/239()	Specification : AS PER DRG	C	Estab
2) Cradle Sear IN Finished Condition Description : Cradle Sear IN Finished Condition()	Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07	C	Estab
3) Butt Assembly drg .no. 1005-000835 for Carbine 9mm Description : Butt Assembly drg .no. 1005-000835 for Carbine 9mm()	Specification : AS PER DRG.	C	Estab
4) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()	Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided	C	Estab
5) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897()	Specification : AS PER DRG.	C	Estab
6) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56()	Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)	C	Estab
7) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)()	Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)	C	Estab

Category : p
Grade : 3
Size : M

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) Sear Drg. No. ARDE SK 2689/239 Description : Sear Drg. No. ARDE SK 2689/239()	Specification : AS PER DRG	C	Estab
2) Cradle Sear IN Finished Condition Description : Cradle Sear IN Finished Condition()	Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07	C	Estab
3) Butt Assembly drg .no. 1005-000835 for Carbine 9mm Description : Butt Assembly drg .no. 1005-000835 for Carbine 9mm()	Specification : AS PER DRG.	C	Estab
4) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()	Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided	C	Estab
5) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897()	Specification : AS PER DRG.	C	Estab
6) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56()	Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)	C	Estab
7) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)()	Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Grip Pistol Assembly as per drawing No 27P 6500[70]()	Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) Cradle Sear IN Finished Condition Description : Cradle Sear IN Finished Condition()	Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Knife Bayonet Assembly Drg No SK 6552 TE[70]()	Specification : Knife-Bayonet Assembly Drg No. SK- 6552/ TE	C	Nonestab

Category : p
Grade : 3
Size : S

932

DEEP DIES & TOOLS
L205, SECTOR-E, L.D.A. COLONY, NEAR GROVER CORNER, KANPUR ROAD LUCKNOW UP
PIN1 : 226012
Phone No. : 0522-2436402, 2436824
GSTIN : 09AADFD2636G1ZM

AADFD2636G

Download

1) Small Arms Factory

Name	Specification	Use	Status
1) MACHINING COMPONENTS FOR SMALL ARMS()	AS PER DRAWING	C	Estab.
2) SHEET METAL COMPONENTS FOR SMALL ARMS()	AS PER DRAWING	C	Estab.
3) SUB ASSEMBLY FOR SMALL ARMS()	AS PER DRASING	C	Estab.

Category : P
Grade : II
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) Cocking Handle Carbine Drg No. AKC08/8, Description : Cocking Handle Carbine Drg No. AKC08/8,()	Specification : AS PER DRG.	C	Estab
2) BRACKET FORESIGHT Drg. No AKC-02/5 Description : BRACKET FORESIGHT Drg. No AKC-02/5()	Specification : AS PER DRG	C	Estab
3) Loop Sling Front for JVPC Description : Loop Sling Front for JVPC()	Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB	C	Estab
4) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG()	Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.	C	Estab

Category : ddp
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) BLANK FOR TRAY AS PER DRG.NO.SKM-864 Description : BLANK FOR TRAY AS PER DRG.NO.SKM-864()	Specification : BLANK FOR TRAY AS PER DRG.NO.SKM-864	C	Estab
2) TRAY RH FOR MAG AIR VERSION Description : TRAY RH FOR MAG AIR VERSION()	Specification : DRG. NO. 3602008194	C	Estab
3) BLOCK REAR BLANK Description : BLOCK REAR BLANK()	Specification : BLOCK REAR BLANK TO DRG NO. AKC-03/4BL* FOR CARBINE 5.56MM.	C	Estab
4) BLANK BODY COCKING SLIDE for MAG Description : BLANK BODY COCKING SLIDE for MAG()	Specification : BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G).	C	Estab
5) Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146 Description : Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146()	Specification : AS PER DRG.	C	Estab
6) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5()	Specification : AS PER DRG.	C	Estab
7) LEVER RIVETTING 5.56MM Description : LEVER RIVETTING 5.56MM()	Specification : AS PER DRG.	C	Estab
8) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024()	Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024	C	Estab
9) COVER & PLATE BRAZING Description : COVER & PLATE BRAZING()	Specification : AS PER DRAWING	C	Estab
10) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12()	Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12	C	Estab
11) LOCK RETAINER IN FINISHED CONDITION Description : LOCK RETAINER IN FINISHED CONDITION()	Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10.	C	Estab
12) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM Description : SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM()	Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016.	C	Estab
13) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.()	Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.	C	Estab
14) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm Description : Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm()	Specification : AS PER DRG.no. 1005-000977	C	Estab
15) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM()	Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001	C	Estab
16) Block fixing grip pistol Drg. No. AKC-O1/5 Description : Block fixing grip pistol Drg. No. AKC-O1/5()	Specification : AS PER DRG.	C	Estab
17) Trigger Drg. No. AKC 01/08 In Finished Condition Description : Trigger Drg. No. AKC 01/08 In Finished Condition()	Specification : AS PER DRG.	C	Estab
18) BRACKET FORESIGHT Drg. No AKC-02/5 Description : BRACKET FORESIGHT Drg. No AKC-02/5()	Specification : AS PER DRG	C	Estab
19) Picatiny Rail FOR CARBINE 5 56MM IN FINISHED CONDITION Description : Picatiny Rail FOR CARBINE 5 56MM IN FINISHED CONDITION()	Specification : PICATINY RAIL TO DRG NO. AKC-08/1/2* FOR CARBINE 5.56MM IN FINISHED CONDITION.	C	Estab
20) CHANGE LEVER LEFT FOR CARBINE 5point56MM Description : CHANGE LEVER LEFT FOR CARBINE 5point56MM()	Specification : CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.	C	Estab
21) REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM Description : REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM()	Specification : REFLECTOR TO DRG NO.AKC-12/2 FOR CARBINE 5.56MM IN FINISHED CONDIION.	C	Estab
22) GUIDE PISTON Drg. No AKC/02/31 Description : GUIDE PISTON Drg. No AKC/02/31()	Specification : AS PER DRG	C	Estab
23) MOUNTING RAIL for JVPC Description : MOUNTING RAIL for JVPC()	Specification : MOUNTING RAIL	C	Estab
24) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION()	Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009	C	Estab
25) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04()	Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04	C	Estab
26) PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 Description : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99()	Specification : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99	C	Estab
27) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG()	Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02	C	Estab
28) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG()	Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION.	C	Estab
29) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 Description : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02()	Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)	C	Estab
30) PIVOT COVER LATCHES SPRING FOR MAG Description : PIVOT COVER LATCHES SPRING FOR MAG()	Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)	C	Estab
31) Trigger guard DS CAT No. 1005-000606 in finished condition Description : Trigger guard DS CAT No. 1005-000606 in finished condition()	Specification : AS PER DRG. DS CAT No. 1005-00060	C	Estab
32) TRIGGER GUARD FOR MAG Description : TRIGGER GUARD FOR MAG()	Specification : DS CAT NO.1005-000606 IN FINISHED CONDITION. DC(I) 26298-SA DATE 23/02/07	C	Estab
33) Locating Key Gas Regulator Screw for MAG Description : Locating Key Gas Regulator Screw for MAG()	Specification : LOCATING KEY GAS REGULATOR SCREW TO DS CAT NO. 5315-001505 DC(I) NO. 25355-SA DT- 7.5.02 IN FINISHED CONDITION.	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) BLANK FOR TRAY AS PER DRG.NO.SKM-864 Description : BLANK FOR TRAY AS PER DRG.NO.SKM-864()	Specification : BLANK FOR TRAY AS PER DRG.NO.SKM-864	C	Estab
2) TRAY RH FOR MAG AIR VERSION Description : TRAY RH FOR MAG AIR VERSION()	Specification : DRG. NO. 3602008194	C	Estab
3) BLOCK REAR BLANK Description : BLOCK REAR BLANK()	Specification : BLOCK REAR BLANK TO DRG NO. AKC-03/4BL* FOR CARBINE 5.56MM.	C	Estab
4) BLANK BODY COCKING SLIDE for MAG Description : BLANK BODY COCKING SLIDE for MAG()	Specification : BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G).	C	Estab
5) Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146 Description : Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146()	Specification : AS PER DRG.	C	Estab
6) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5()	Specification : AS PER DRG.	C	Estab
7) LEVER RIVETTING 5.56MM Description : LEVER RIVETTING 5.56MM()	Specification : AS PER DRG.	C	Estab
8) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024()	Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024	C	Estab
9) COVER & PLATE BRAZING Description : COVER & PLATE BRAZING()	Specification : AS PER DRAWING	C	Estab
10) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12()	Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12	C	Estab
11) LOCK RETAINER IN FINISHED CONDITION Description : LOCK RETAINER IN FINISHED CONDITION()	Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10.	C	Estab
12) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM Description : SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM()	Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016.	C	Estab
13) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.()	Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.	C	Estab
14) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm Description : Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm()	Specification : AS PER DRG.no. 1005-000977	C	Estab
15) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM()	Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001	C	Estab
16) Block fixing grip pistol Drg. No. AKC-O1/5 Description : Block fixing grip pistol Drg. No. AKC-O1/5()	Specification : AS PER DRG.	C	Estab
17) Trigger Drg. No. AKC 01/08 In Finished Condition Description : Trigger Drg. No. AKC 01/08 In Finished Condition()	Specification : AS PER DRG.	C	Estab
18) BRACKET FORESIGHT Drg. No AKC-02/5 Description : BRACKET FORESIGHT Drg. No AKC-02/5()	Specification : AS PER DRG	C	Estab
19) Picatiny Rail FOR CARBINE 5 56MM IN FINISHED CONDITION Description : Picatiny Rail FOR CARBINE 5 56MM IN FINISHED CONDITION()	Specification : PICATINY RAIL TO DRG NO. AKC-08/1/2* FOR CARBINE 5.56MM IN FINISHED CONDITION.	C	Estab
20) CHANGE LEVER LEFT FOR CARBINE 5point56MM Description : CHANGE LEVER LEFT FOR CARBINE 5point56MM()	Specification : CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.	C	Estab
21) REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM Description : REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM()	Specification : REFLECTOR TO DRG NO.AKC-12/2 FOR CARBINE 5.56MM IN FINISHED CONDIION.	C	Estab
22) GUIDE PISTON Drg. No AKC/02/31 Description : GUIDE PISTON Drg. No AKC/02/31()	Specification : AS PER DRG	C	Estab
23) MOUNTING RAIL for JVPC Description : MOUNTING RAIL for JVPC()	Specification : MOUNTING RAIL	C	Estab
24) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION()	Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009	C	Estab
25) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04()	Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04	C	Estab
26) PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 Description : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99()	Specification : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99	C	Estab
27) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG()	Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02	C	Estab
28) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG()	Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION.	C	Estab
29) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 Description : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02()	Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)	C	Estab
30) PIVOT COVER LATCHES SPRING FOR MAG Description : PIVOT COVER LATCHES SPRING FOR MAG()	Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)	C	Estab
31) Trigger guard DS CAT No. 1005-000606 in finished condition Description : Trigger guard DS CAT No. 1005-000606 in finished condition()	Specification : AS PER DRG. DS CAT No. 1005-00060	C	Estab
32) TRIGGER GUARD FOR MAG Description : TRIGGER GUARD FOR MAG()	Specification : DS CAT NO.1005-000606 IN FINISHED CONDITION. DC(I) 26298-SA DATE 23/02/07	C	Estab
33) Locating Key Gas Regulator Screw for MAG Description : Locating Key Gas Regulator Screw for MAG()	Specification : LOCATING KEY GAS REGULATOR SCREW TO DS CAT NO. 5315-001505 DC(I) NO. 25355-SA DT- 7.5.02 IN FINISHED CONDITION.	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) Steel Blank Semi Finished for Block Gas Description : Steel Blank Semi Finished for Block Gas()	Specification : Steel Blank Semi Finished for Block Gas to Dgn. No. SKM-911*	R	Estab
2) TRAY RH FOR MAG AIR VERSION Description : TRAY RH FOR MAG AIR VERSION()	Specification : DRG. NO. 3602008194	R	Estab
3) FRAME TRIGGER for MAG Description : FRAME TRIGGER for MAG()	Specification : FRAME TRIGGER DS CAT NO.1005 - 006602 DC(I)NO.25317-SA DT.03.04.2002 IN FINISHED CONDITION W/O ANODISING.	R	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) BUCKLE ASSEMBLY FOR SMALL ARMS Description : BUCKLE ASSEMBLY FOR SMALL ARMS()	Specification : AS PER DRAWING	C	Estab
2) HANDLE ASSEMBLY Drg. No SK 4407* Description : HANDLE ASSEMBLY Drg. No SK 4407*()	Specification : HANDLE ASSEMBLY TO DRG.NO-SK 4407*	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.()	Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) TOOL ADJUSTING FOR MAG Description : TOOL ADJUSTING FOR MAG()	Specification : DS CAT NO.1005-000766 DC(I) NO.24257-SA DT.14-01-99 IN FINISHED CONDITION.	C	Estab

Category : p
Grade : 3
Size : S

933

MOHIT AGENCIES
C-25, PANKI INDUSTRIAL AREA , SITE NO-1 KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : M- 9935025797
GSTIN : 09AALFM9650P1ZA

AALFM9650P

Download

1) Ordnance Equipment Factory Hazaratpur

Name	Specification	Use	Status
1) TAPE WOVEN NYLON 26 MM WR UVR TREATED BLACK()	ADRDE/SPECN/70(b)	R	ESTABLISHED
2) TAPE WOVEN NYLON 30MM WR UVR TREATED()	ADRDE/SPECN/70(b)	R	ESTABLISHED

Category : DP
Grade : I
Size : S

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) TAPE NEWAR POLYESTER VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
2) CORD ELASTIC VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
3) WEBBING NYLON VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
4) TAPE POLYESTER VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
5) TAPE NYLON VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
6) TAPE NEWAR VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
7) TAPE ELASTIC VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
8) TAPE COTTON VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
9) CORD NYLON BRAIDED VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R
10) CORD NYLON VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R

Category : DDP
Grade : II
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) 100 % POLY. TAPE 25 MM (ROLL LENGTH 100 M EXCLUDING SAMPLE)[2101797674]()	Specification : 1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963	R	Estab
2) 100 % POLYESTER TAPE 12.7 MM[2101797675]()	Specification : 1--Width(mm) ---12.7 mm. Appendix B of IS:3846:1984 2--Mass(gm/mt.)--- 8(max). Appendix C of IS:3846:1984 3--Ends in full/width)--- 60+3/-0. IS:1963 4--Picks/cm --- 20+2/-0 (total picks based on two thread working as one. IS:1963 5--Br	R	Estab
3) TAPE NYLON 2.6CM MEDIUM UD BS-600 KG[2101776039]()	Specification : SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING	R	Estab
4) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()	Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING	R	Estab
5) TAPE COTTON 6.5 mm U/D B.S. : 36 KG (+) 5 (B.S. amended vide amendment No.1 of Oct"72 )[2101786936]()	Specification : Weight (g/100 m max) has also been amended from 345 to 340 vide amendment No. 1 of Occt"72 SPECIFICATION NO.: IS : 5716 - 1970.	R	Estab
6) TAPE ELASTIC 25 MM UNDYED[2101786873]()	Specification : SEPCN.IS:9686-1980 AMENDMENT NO. 1 OF Dec.83 and packing & marking schedule no. CQA(T&C)/PMS/130	R	Estab
7) TAPE NYLON 13 MM UNDYED (182 KG.)[2101786882]()	Specification : SPECIFICATION NO. : ADDE/BP/3 (c) ROLL LENGTH 100 MTRS. EXCLUDING SAMPLE.	R	Estab
8) TAPE ELASTIC 50 MM HEAVY DUTY QUALITY 5030 ASH COLOUR[2101786864]()	Specification : SPECN.NO. :ADRDE/QMS/TDTM/T/2014/01 DT.-10.04.2014	R	Estab
9) TAPE NYLON 1.6 CM U/D BS 200 KG[2101776044]()	Specification : SPECIFICATION NO: ADDE/BP/1(b).ROLL LENGTH 50 MTR. EXCLUDING SAMPLING.	R	Estab
10) TAPE NYLON 20 mm UNDYED B.S. 200 kg.[2101786856]()	Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/44	R	Estab

Category : p
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) TAPE TEXTILE NYLON TUBULAR 26 MM UNDYED (BS 17500 N)[2101786821]()	Specification : SPECIFICATION NO.: ADRDE/SPECN/1985/27(b) ROLL LENGTH 100 MTR. INCLUDING SAMPLING.	R	Estab

Category : p
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) 100 % POLY. TAPE 25 MM (ROLL LENGTH 100 M EXCLUDING SAMPLE)[2101797674]()	Specification : 1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963	R	Estab
2) 100 % POLYESTER TAPE 12.7 MM[2101797675]()	Specification : 1--Width(mm) ---12.7 mm. Appendix B of IS:3846:1984 2--Mass(gm/mt.)--- 8(max). Appendix C of IS:3846:1984 3--Ends in full/width)--- 60+3/-0. IS:1963 4--Picks/cm --- 20+2/-0 (total picks based on two thread working as one. IS:1963 5--Br	R	Estab
3) TAPE NYLON 2.6CM MEDIUM UD BS-600 KG[2101776039]()	Specification : SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING	R	Estab
4) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()	Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING	R	Estab
5) TAPE COTTON 6.5 mm U/D B.S. : 36 KG (+) 5 (B.S. amended vide amendment No.1 of Oct"72 )[2101786936]()	Specification : Weight (g/100 m max) has also been amended from 345 to 340 vide amendment No. 1 of Occt"72 SPECIFICATION NO.: IS : 5716 - 1970.	R	Estab
6) TAPE ELASTIC 25 MM UNDYED[2101786873]()	Specification : SEPCN.IS:9686-1980 AMENDMENT NO. 1 OF Dec.83 and packing & marking schedule no. CQA(T&C)/PMS/130	R	Estab
7) TAPE NYLON 13 MM UNDYED (182 KG.)[2101786882]()	Specification : SPECIFICATION NO. : ADDE/BP/3 (c) ROLL LENGTH 100 MTRS. EXCLUDING SAMPLE.	R	Estab
8) TAPE ELASTIC 50 MM HEAVY DUTY QUALITY 5030 ASH COLOUR[2101786864]()	Specification : SPECN.NO. :ADRDE/QMS/TDTM/T/2014/01 DT.-10.04.2014	R	Estab
9) TAPE NYLON 1.6 CM U/D BS 200 KG[2101776044]()	Specification : SPECIFICATION NO: ADDE/BP/1(b).ROLL LENGTH 50 MTR. EXCLUDING SAMPLING.	R	Estab
10) TAPE NYLON 20 mm UNDYED B.S. 200 kg.[2101786856]()	Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/44	R	Estab
11) RIBBON NYLON 16 MM UNDYED[2101682215]()	Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING	R	Estab
12) RIBBON NYLON 50 MM UNDYED[2101682250]()	Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING	R	Estab
13) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()	Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.	R	Estab
14) TAPE NYLON 66, 26mm TUBULAR BS 1850 KG[2101797011]()	Specification : ADRDE/SPECN/2000/54(c)	R	Estab
15) TAPE NYLON 66,26 MM.B.S.550 KG.F.U/D[2101797008]()	Specification : ADRDE/SPCN/2000/54(b)	R	Estab

Category : p
Grade : Grade III
Size : S

934

VIRAJ SYNTEX PVT LTD
J-27, PANKI INDUSTRIAL AREA ,SITE -III KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : M-9918787222
GSTIN : 09AABCV1571F1ZE

AABCV1571F

Download

1) Ordnance Equipment Factory Hazaratpur

Name	Specification	Use	Status
1) TAPE WOVEN NYLON 26 MM WR UVR TREATED BLACK()	ADRDE/SPECN/70(b)	R	ESTABLISHED
2) TAPE WOVEN NYLON 30 MM WR UVR TREATED BLACK()	ADRDE/SPECN/70(b)	R	ESTABLISHED

Category : DP
Grade : I
Size : S

1) Ordnance Parachute Factory

[ENR Registration]

Name	Specification	Use	Status
1) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG). Description : WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).()	Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.	R	Estab

Category : p
Grade : 2
Size : S

935

DI KAY INSULATION INDUSTRIES PRIVATE LIMITED
9-E, INDUSTRIAL AREA, GOVINDPURA, BHOPAL, MADHYA PRADESH
PIN1 : 462023
Phone No. : 0755-2586088, 4282018 FAX: 0755-2586331
GSTIN : 23AAKCD0966D1ZW

BPLD01190A

Download

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) BASE PLATE 7.8 MM FOR HEAT/TPT (6170444700)()	DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001	C	ESTABLISHED
2) BASE PLATE 8.5 MM FOR HE/ILLG (6170444690)()	DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001	C	ESTABLISHED
3) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)()	CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242	C	NOT ESTABLISHED
4) SET MODULE ASSY(E)100-120 BOMB FRAG (9911358085)()	SET OF MODULE ASSEMBLY EMPTY TO DRG NO.0303 00 01 01 03 000 00PC & WITH 10 COMPONENTS FOR PRE-FRAG 100-120 KG BOMB.TO ARDE SPECN.NO.ARDE/SPECN/669 DT DEC 2007. Rev. 3 DT. 23/11/2015	C	NOT ESTABLISHED

Category : P
Grade : II
Size : S

1) Ordnance Factory Khamaria

[Deemed Registration]

Name	Specification	Use	Status
1) SET MODULE ASSY E 100 120 BOMB FRAG LF 9911358085 Description : SET MODULE ASSY E 100 120 BOMB FRAG LF 9911358085()	Specification : SET OF MODULE ASSEMBLY EMPTY TO DRG NO.0303 00 01 01 03 000 00PC & WITH 10 COMPONENTS FOR PRE-FRAG 100-120 KG BOMB.TO ARDE SPECN.NO.ARDE/SPECN/669 DT DEC 2007.Rev.3 DT.23/11/2015.	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[Deemed Registration]

Name	Specification	Use	Status
1) BASE PLATE 7.8 MM FOR TPT/HEAT (6170444700) Description : BASE PLATE 7.8 MM FOR TPT/HEAT (6170444700)()	Specification : BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AV	C	Estab
2) BASE PLATE 8.5 MM FOR HE/ILLG. (6170444690) Description : BASE PLATE 8.5 MM FOR HE/ILLG. (6170444690)()	Specification : BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVO	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) Base Plate for Shell 105mm IFG HE()	Specification : BASE PLATE TO DRG. NO. ISX-384(FOR SHELL 105MM IFG HE)	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) PRE-FRAG MODULE ASSEMBLY.[99]()	Specification : PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015	C	Nonestab

Category : ddp
Grade : Grade II
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) 7117062052 CROWN DRG NO 675 62 49 10 [71]()	Specification : CROWN DRG.NO.675-62-49-10	R	Estab
2) 7135402118 BUSHING DRG NO 765 55 118 [71]()	Specification : BUSHING DRG.NO.765-55-118	R	Estab

Category : p
Grade : Grade III
Size : S

936

INDO ENGINEERING PRODUCTS
5B, TYPE-II, APIIC, INDUSTRIAL ESTATE, PRASANTHI NAGAR, KUKATPALLY, HYDERABAD, TELANGANA,
PIN1 : 500072
Phone No. : 040-23078907,MOB-9391042281
GSTIN : 36ADCPC9303P1ZF

HYDV03858B

Download

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) TUBE CYLINDER GAS WELDING ASSEMBLY FOR 7.62MM ASSAULT RIFLE (GHAATAK)()	AS PER DRAWING.	C	Not Estab.

Category : P
Grade : III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]()	Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]()	Specification : AS PER DRAWING	C	Nonestab
2) SLIDE TO DRG NO CTM 166[70]()	Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()	Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7	C	Nonestab
2) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()	Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL	C	Nonestab
3) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()	Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL	C	Nonestab
4) MSL HOUSING LAUNCHER[70]()	Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL	C	Nonestab
5) CYLINDER TO DRG NO 44P 02001 STAR[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
6) Manufacturing and supply of barrel blank after honing stage[70]()	Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel	C	Nonestab
7) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()	Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001	C	Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()	Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()	Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SEMI- FINISHED BLANK TO DRG. NO. TEND 2529 (OFT MATERIAL) REQD.FOR MSL CYLINDER TO DRG. NO. 33P 2011.[70]()	Specification : AS PER DRAWING AND SPECIFICATION	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]()	Specification : AS PER DRG NO TEND 2383 STR 2	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) RAIL SK 6548 TE[70]()	Specification : RAIL SK-6548/ TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]()	Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) OPERATION DEEP HOLE DRILLING item code 0000000300[00]()	Specification : DRG.NO. TRD-222077	C	Estab

Category : p
Grade : Grade III
Size : S

937

CENTRAL TOOL ROOM & TRAINING CENTRE
BONHOOGHLY INDUSTRIAL AREA KOLKATA WEST BENGAL
PIN1 : 700108
Phone No. : 09330954706
GSTIN : 19AAAAC2480P1ZE

CALC00575B

Download

1) Ordnance Factory Dumdum

Name	Specification	Use	Status
1) STEEL CONTAINER FOR PACKING OF TU 1111()	DRG NO. ARM 1519	C	NOT ESTAB.
2) BOX STEEL TO HOLD TU-250()	DRG NO. ARDE-9501-05	C	NOT ESTAB.

Category : P
Grade : III
Size : M

1) Gun and Shell Factory

[ENR Registration]

Name	Specification	Use	Status
1) GAUGE CONFORM TO DRG NO GWF 9326 Description : GAUGE CONFORM TO DRG NO GWF 9326()	Specification : GAUGE CONFORM TO DRG NO GWF 9326	S	Estab
2) TOOL ASSEMBLY FOR BLANKING AND PIERCING OPERATION Description : TOOL ASSEMBLY FOR BLANKING AND PIERCING OPERATION()	Specification : TOOL ASSEMBLY FOR BLANKING AND PIERCING OPERATION	S	Estab
3) DIE AND PUNCH FOR TOOL ASSEMBLY T 25 66 0229 0 Description : DIE AND PUNCH FOR TOOL ASSEMBLY T 25 66 0229 0()	Specification : DIE AND PUNCH FOR TOOL ASSEMBLY T 25 66 0229 0	S	Estab
4) TOOL ASSEMBLY AS PER DRG NO T 25 66 0228 0 Description : TOOL ASSEMBLY AS PER DRG NO T 25 66 0228 0()	Specification : TOOL ASSEMBLY AS PER DRG NO T 25 66 0228 0	S	Estab
5) DIE AND PUNCH FOR TOOL ASSEM OF DRAWING T 25 66 0228 Description : DIE AND PUNCH FOR TOOL ASSEM OF DRAWING T 25 66 0228()	Specification : DIE AND PUNCH FOR TOOL ASSEM OF DRAWING T 25 66 0228	S	Estab
6) DIE AND PUNCHAS PER DRG NO T 25 66 0227 0 Description : DIE AND PUNCHAS PER DRG NO T 25 66 0227 0()	Specification : DIE AND PUNCHAS PER DRG NO T 25 66 0227 0	S	Estab
7) GAUGE TO DRG NO LK 8029 7111 FOR ASSY OF SKDS AK 6 Description : GAUGE TO DRG NO LK 8029 7111 FOR ASSY OF SKDS AK 6()	Specification : GAUGE TO DRG NO LK 8029 7111 FOR ASSY OF SKDS AK 6	S	Estab
8) FIXTURE FOR ASSEMPLING OF 40 MM PFFC METALLIC COMP Description : FIXTURE FOR ASSEMPLING OF 40 MM PFFC METALLIC COMP()	Specification : FIXTURE FOR ASSEBLING OF 40 MM PFFC METALLIC COMP	S	Estab
9) CONCENTRICITY BORE CH DIA DRG NO GF 209966 Description : CONCENTRICITY BORE CH DIA DRG NO GF 209966()	Specification : CONCENTRICITY BORE / CH DIA DRG NO GF-209966	S	Estab
10) STOPPER PLUG AS PER DRG NO 7038 4003 Description : STOPPER PLUG AS PER DRG NO 7038 4003()	Specification : STOPPER / PLUG AS PER DRG NO 7038-4003	S	Estab
11) TRANSPORTATION OF FIXTURE AS PER DRG NO 7095 4001 Description : TRANSPORTATION OF FIXTURE AS PER DRG NO 7095 4001()	Specification : TRANSPORTATION OF FIXTURE AS PER DRG NO 7095 4001	S	Estab
12) WRENCH AS PER DRG NO 7813 4026 Description : WRENCH AS PER DRG NO 7813 4026()	Specification : WRENCH AS PER DRG NO 7813-4026	S	Estab
13) TECHNOLOGICAL STOP REAR AS PER DRG NO 7820 4217 Description : TECHNOLOGICAL STOP REAR AS PER DRG NO 7820 4217()	Specification : TECHNOLOGICAL STOP REAR AS PER DRG NO 7820 4217	S	Estab
14) RIGID STOP AS PER DRG NO 7820 4218 Description : RIGID STOP AS PER DRG NO 7820 4218()	Specification : RIGID STOP AS PER DRG NO 7820 4218	S	Estab
15) SETTING PIECE AS PER DRG NO 7820 4223 Description : SETTING PIECE AS PER DRG NO 7820 4223()	Specification : SETTING PIECE AS PER DRG NO 7820 4223	S	Estab
16) CLAMPING FIXTURE AS PER DRG NO 7820 4224 Description : CLAMPING FIXTURE AS PER DRG NO 7820 4224()	Specification : CLAMPING FIXTURE AS PER DRG NO 7820 4224	S	Estab
17) LOWER TECHNOLOGICAL BUFFER AS PER DRG NO 7820 4238 Description : LOWER TECHNOLOGICAL BUFFER AS PER DRG NO 7820 4238()	Specification : LOWER TECHNOLOGICAL BUFFER AS PER DRG NO 7820 4238	S	Estab
18) MANDREL AS PER DRG NO 7820 4245 Description : MANDREL AS PER DRG NO 7820 4245()	Specification : MANDREL AS PER DRG NO 7820 4245	S	Estab
19) RIGID STOP AS PER DRG NO 7820 4352 Description : RIGID STOP AS PER DRG NO 7820 4352()	Specification : RIGID STOP AS PER DRG NO 7820 4352	S	Estab
20) FIXTURE FOR CHECKING ANGULAR SWING Description : FIXTURE FOR CHECKING ANGULAR SWING()	Specification : FIXTURE FOR CHECKING ANGULAR SWING	S	Estab
21) INSERTING SPG AND BALLS IN HALF COUPLING Description : INSERTING SPG AND BALLS IN HALF COUPLING()	Specification : INSERTING SPG AND BALLS IN HALF COUPLING	S	Estab
22) TECHNOLOGICAL DISCHARGE REGULATOR Description : TECHNOLOGICAL DISCHARGE REGULATOR()	Specification : TECHNOLOGICAL DISCHARGE REGULATOR	S	Estab
23) TECHNOLOGICAL ADAPTOR WITH MANOMETER Description : TECHNOLOGICAL ADAPTOR WITH MANOMETER()	Specification : TECHNOLOGICAL ADAPTOR WITH MANOMETER	S	Estab
24) UNION AS PER DRG NO 7874 4026 Description : UNION AS PER DRG NO 7874 4026()	Specification : UNION AS PER DRG NO 7874 4026	S	Estab
25) FIXTURE FOR CHECKING PLAY AS PER DRG NO 7879 4154 Description : FIXTURE FOR CHECKING PLAY AS PER DRG NO 7879 4154()	Specification : FIXTURE FOR CHECKING PLAY AS PER DRG NO 7879 4154	S	Estab
26) FIXTURE AS PER DRG NO 8381 6390 Description : FIXTURE AS PER DRG NO 8381 6390()	Specification : FIXTURE AS PER DRG NO 8381 6390	S	Estab
27) 54 POINT 6 MM DIA CORE DRILL TO DRG NO LK 2325 4043 Description : 54 POINT 6 MM DIA CORE DRILL TO DRG NO LK 2325 4043()	Specification : 54.6 MM DIA CORE DRILL TO DRG NO LK 2325 4043	S	Estab
28) 35 POINT 7 MM DIA CORE DRILL TO DRG NO LK 2326 4023 Description : 35 POINT 7 MM DIA CORE DRILL TO DRG NO LK 2326 4023()	Specification : 35.7 MM DIA CORE DRILL TO DRG NO LK 2326 4023/010	S	Estab
29) 54 POINT 1 MM DIA CORE DRILL TO DRG NO LK 2325 4114 Description : 54 POINT 1 MM DIA CORE DRILL TO DRG NO LK 2325 4114()	Specification : 54.1 MM DIA CORE DRILL TO DRG NO LK 2325 4114	S	Estab
30) 42 MM DIA COUNTER BORE TO DRG NO LK 2325 4086 SB Description : 42 MM DIA COUNTER BORE TO DRG NO LK 2325 4086 SB()	Specification : 42 MM DIA COUNTER BORE TO DRG NO LK 2325 4086 SB	S	Estab
31) 54 POINT 90 MM DIA REAMER TO DRG NO LK 2363 4432 Description : 54 POINT 90 MM DIA REAMER TO DRG NO LK 2363 4432()	Specification : 54.90 MM DIA REAMER TO DRG NO LK 2363 4432	S	Estab
32) 55 POINT 10 MM DIA REAMER TO DRG NO LK 2363 4433 Description : 55 POINT 10 MM DIA REAMER TO DRG NO LK 2363 4433()	Specification : 55 POINT 10 MM DIA REAMER TO DRG NO LK 2363 4433	S	Estab
33) 35 POINT 85 MM DIA REAMER TO DRG NO LK 2366 4082 BY 001 Description : 35 POINT 85 MM DIA REAMER TO DRG NO LK 2366 4082 BY 001()	Specification : 35 POINT 85 MM DIA REAMER TO DRG NO LK 2366 4082 BY 001	S	Estab
34) 35 POINT 96 MM DIA REAMER TO DRG NO LK 2366 4099 Description : 35 POINT 96 MM DIA REAMER TO DRG NO LK 2366 4099()	Specification : 35 POINT 96 MM DIA REAMER TO DRG NO LK 2366 4099	S	Estab
35) BORING BAR TO DRG NO LK 6254 4029 Description : BOARING BAR TO DRG NO LK 6254 4029()	Specification : BORING BAR TO DRG NO LK 6254 4029	S	Estab
36) DIMENSIONAL GAUGE AS PER DRG NO 8154 6736 Description : DIMENSIONAL GAUGE AS PER DRG NO 8154 6736()	Specification : DIMENSIONAL GAUGE AS PER DRG NO 8154 6736	S	Estab
37) TEMPLATE AS PER DRG NO LK 8381 6390 Description : TEMPLATE AS PER DRG NO LK 8381 6390()	Specification : TEMPLATE AS PER DRG NO LK 8381 6390	S	Estab
38) GAUGE AS PER DRG NO LK 8139 5712 Description : GAUGE AS PER DRG NO LK 8139 5712()	Specification : GAUGE AS PER DRG NO LK 8139 5712	S	Estab
39) SB GAUGE AS PER DRG NO LK 8154 6736 Description : SB GAUGE AS PER DRG NO LK 8154 6736()	Specification : SB GAUGE AS PER DRG NO LK 8154 6736	S	Estab
40) PLUG AS PER DRG NO LK 8130 6159 Description : PLUG AS PER DRG NO LK 8130 6159()	Specification : PLUG AS PER DRG NO LK 8130 6159	S	Estab
41) CLAMP AS PER DRG NO LK 8102 6394 Description : CLAMP AS PER DRG NO LK 8102 6394()	Specification : CLAMP AS PER DRG NO LK 8102 6394	S	Estab
42) FIXTURE TO DRG NO LK 7200 4020 VICE Description : FIXTURE TO DRG NO LK 7200 4020 VICE()	Specification : FIXTURE TO DRG NO LK 7200 4020 VICE	S	Estab
43) COPYING FIXTURE TO DRG NO LK 7220 4109 Description : COPYING FIXTURE TO DRG NO LK 7220 4109()	Specification : COPYING FIXTURE TO DRG NO LK 7220 4109	S	Estab
44) FIXTURE FOR MILLING AS PER DRG NO LK 7222 4209 Description : FIXTURE FOR MILLING AS PER DRG NO LK 7222 4209()	Specification : FIXTURE FOR MILLING AS PER DRG NO LK 7222 4209	S	Estab
45) SET UP FIXTURE TO DRG NO LK 7334 4041 Description : SET UP FIXTURE TO DRG NO LK 7334 4041()	Specification : SET UP FIXTURE TO DRG NO LK 7334 4041	S	Estab
46) FIXTURE TO DRG NO LK 7347 4548 ADJUSTMENT JIG Description : FIXTURE TO DRG NO LK 7347 4548 ADJUSTMENT JIG()	Specification : FIXTURE TO DRG NO LK 7347 4548 ADJUSTMENT JIG	S	Estab
47) FIXTURE Description : FIXTURE()	Specification : FIXTURE TO DRG..NO.LK7350-4058	S	Estab
48) FIXTURE TO DRG NO LK 7350 4153 Description : FIXTURE TO DRG NO LK 7350 4153()	Specification : FIXTURE TO DRG NO LK 7350 4153	S	Estab
49) FIXTURE TO DRG NO LK 7353 4258 Description : FIXTURE TO DRG NO LK 7353 4258()	Specification : FIXTURE TO DRG NO LK 7353 4258	S	Estab
50) FIXTURE TO DRG NO LK 7360 4176 Description : FIXTURE TO DRG NO LK 7360 4176()	Specification : FIXTURE TO DRG NO LK 7360 4176	S	Estab
51) FIXTURE TO DRG NO LK 7360 4335 Description : FIXTURE TO DRG NO LK 7360 4335()	Specification : FIXTURE TO DRG NO LK 7360 4335	S	Estab
52) FIXTURE FOR BORING TO DRG NO LK 7422 4071 Description : FIXTURE FOR BORING TO DRG NO LK 7422 4071()	Specification : FIXTURE FOR BORING TO DRG NO LK 7422 4071	S	Estab
53) FIXTURE TO DRG NO LK 7520 4055 Description : FIXTURE TO DRG NO LK 7520 4055()	Specification : FIXTURE TO DRG NO LK 7520 4055	S	Estab
54) FIXTURE FOR PASTING OF RUBBER SEAL TO DRG NO LK Description : FIXTURE FOR PASTING OF RUBBER SEAL TO DRG NO LK()	Specification : FIXTURE FOR PASTING OF RUBBER SEAL TO DRG NO LK	S	Estab
55) FIXTURE TO DRG NO LK 7820 4076 Description : FIXTURE TO DRG NO LK 7820 4076()	Specification : FIXTURE TO DRG NO LK 7820-4076	S	Estab
56) FIXTURE TO DRG NO LK 7828 4056 Description : FIXTURE TO DRG NO LK 7828 4056()	Specification : FIXTURE TO DRG NO LK 7828-4056	S	Estab
57) FIXTURE FOR MARKING TO DRG NO LK 7870 4736 Description : FIXTURE FOR MARKING TO DRG NO LK 7870 4736()	Specification : FIXTURE FOR MARKING TO DRG NO LK 7870-4736	S	Estab
58) FIXTURE TO DRG NO LK 7879 4094 Description : FIXTURE TO DRG NO LK 7879 4094()	Specification : FIXTURE TO DRG NO. LK 7879-4094	S	Estab
59) FIXTURE FOR MILLING Description : FIXTURE FOR MILLING()	Specification : FIXTURE FOR MILLING TO DRG.NO.LK 7226-4	S	Estab
60) FIXTURE FOR MILLING TO DRG NO LK 7238 4030 Description : FIXTURE FOR MILLING TO DRG NO LK 7238 4030()	Specification : FIXTURE FOR MILLING TO DRG.NO.LK 7238-4030	S	Estab
61) FIXTURE FOR MILLING DRILLING TO DRG NO LK 7246 Description : FIXTURE FOR MILLING DRILLING TO DRG NO LK 7246()	Specification : FIXTURE FOR MILLING-DRILLING TO DRG.NO.LK 7246-	S	Estab
62) FIXTURE TO DRG NO LK 7347 4469 Description : FIXTURE TO DRG NO LK 7347 4469()	Specification : FIXTURE TO DRG.NO.LK 7347-4469	S	Estab
63) FIXTURE TO DRG NO LK 7826 4008 Description : FIXTURE TO DRG NO LK 7826 4008()	Specification : FIXTURE TO DRG NO LK 7826-4008	R	Estab
64) FUNCTION JIG DRG NO GF 213376 Description : FUNCTION JIG DRG NO GF 213376()	Specification : FUNCTION JIG DRG NO GF-213376	S	Estab
65) FUNCTION GAUGE DRG NO 209966 F Description : FUNCTION GAUGE DRG NO 209966 F()	Specification : FUNCTION GAUGE DRG NO 209966F	R	Estab
66) NO GO SCREW RING GAUGE TO DRG NO GWF 8588 Description : NO GO SCREW RING GAUGE TO DRG NO GWF 8588()	Specification : NO GO SCREW RING GAUGE TO DRG NO GWF-8588	S	Estab
67) POSITIONAL ACCURACY GAUGE DRG NO GWF 8903 Description : POSITIONAL ACCURACY GAUGE DRG NO GWF 8903()	Specification : POSITIONAL ACCURACY GAUGE DRG NO GWF-8903	S	Estab
68) CENTRE TO DRG NO M 11159 FOR 40MM PFFC Description : CENTRE TO DRG NO M 11159 FOR 40MM PFFC()	Specification : CENTRE TO DRG NO M-11159 FOR 40MM PFFC	S	Estab
69) INTERNAL SPACE TO DRG NO M 11152 FOR 40MM PFFC Description : INTERNAL SPACE TO DRG NO M 11152 FOR 40MM PFFC()	Specification : INTERNAL SPACE TO DRG NO M-11152 FOR 40MM PFFC	S	Estab
70) HEIGHT GAUGES TO DRG NO GWS 3953 Description : HEIGHT GAUGES TO DRG NO GWS 3953()	Specification : HEIGHT GAUGES TO DRG NO GWS-3953	S	Estab
71) GAUGE TO DRG NO SPW 06433 Description : GAUGE TO DRG NO SPW 06433()	Specification : GAUGE TO DRG NO SPW-06433 (GF-213376 & GF-213376-1)	S	Estab
72) NO GO SCREW PLUG GAUGE V 642534 Description : NO GO SCREW PLUG GAUGE V 642534()	Specification : NO GO SCREW PLUG GAUGE V 642534	S	Estab
73) FUNCTION GAUGE DRG NO SPW 06182 Description : FUNCTION GAUGE DRG NO SPW 06182()	Specification : FUNCTION GAUGE DRG NO SPW 06182	S	Estab
74) MFG OF DRILLING JIG NO CTT 0289 Description : MFG OF DRILLING JIG NO CTT 0289()	Specification : MFG OF DRILLING JIG NO CTT 0289	S	Estab
75) GAUGE TO DRG NO RFG 7939 Description : GAUGE TO DRG NO RFG 7939()	Specification : GAUGE TO DRG NO RFG 7939	S	Estab
76) EXPANDING MANDRIL TO GSF SKETCH NO M 5355 8 Description : EXPANDING MANDRIL TO GSF SKETCH NO M 5355 8()	Specification : EXPANDING MANDRIL TO GSF SKETCH NO M 5355 8	S	Estab
77) EXPANDING MANDRIL TO DRG NO M 5355 9 Description : EXPANDING MANDRIL TO DRG NO M 5355 9()	Specification : EXPANDING MANDRIL TO DRG NO M 5355 9	S	Estab
78) BORING REAMER FOR CENTRAL SPIDER DRG NO LK 2326 Description : BORING REAMER FOR CENTRAL SPIDER DRG NO LK 2326()	Specification : BORING REAMER FOR CENTRAL SPIDER DRG NO LK 2326	S	Estab
79) POSITION GAUGE DRG NO GWF 8907 Description : POSITION GAUGE DRG NO GWF 8907()	Specification : POSITION GAUGE DRG NO GWF 8907	S	Estab
80) DRILL JIG TT RING DRG NO T 26 65 0237 FOR 64C TT Description : DRILL JIG TT RING DRG NO T 26 65 0237 FOR 64C TT()	Specification : DRILL JIG TT RING DRG NO T 26 65 0237 FOR 64C TT	S	Estab
81) DRILL JIG FOR DIA HOLE OF TT TING DRG NO T 26 65 Description : DRILL JIG FOR DIA HOLE OF TT TING DRG NO T 26 65()	Specification : DRILL JIG FOR DIA HOLE OF TT TING DRG NO T 26 65	S	Estab
82) DRILL JIG UPPER SURFACE OF TI RING DRG NO T 26 65 Description : DRILL JIG UPPER SURFACE OF TI RING DRG NO T 26 65()	Specification : DRILL JIG UPPER SURFACE OF TI RING DRG NO T 26 65	S	Estab
83) DRILL JIG FOR PALLET HOLE AND BALL SPRING HOLE DRG Description : DRILL JIG FOR PALLET HOLE AND BALL SPRING HOLE DRG()	Specification : DRILL JIG FOR PALLET HOLE AND BALL SPRING HOLE DRG	S	Estab
84) DRILL JIG DIA TWO HOLE ON BODY DRG NO T 26 65 0270 Description : DRILL JIG DIA TWO HOLE ON BODY DRG NO T 26 65 0270()	Specification : DRILL JIG DIA TWO HOLE ON BODY DRG NO T 26 65 0270	S	Estab
85) COMBINED JIG AS PER DRG NO 26 65 0276 AND 67 Description : COMBINED JIG AS PER DRG NO 26 65 0276 AND 67()	Specification : COMBINED JIG AS PER DRG NO 26 65 0246 AND 67	S	Estab
86) GAUGE DRG NO GWF 7375A FOR CHECKING CENTRE Description : GAUGE DRG NO GWF 7375A FOR CHECKING CENTRE()	Specification : GAUGE DRG NO GWF 7375A FOR CHECKING CENTRE	S	Estab
87) GAUGE DRG NO GWS 4769A Description : GAUGE DRG NO GWS 4769A()	Specification : GAUGE DRG NO GWS 4769A	S	Estab
88) PLUG GAUGE DRG NO RFG 7923 Description : PLUG GAUGE DRG NO RFG 7923()	Specification : PLUG GAUGE DRG NO RFG 7923	S	Estab
89) PLUG GAUGE AS PER DRG NO GW 00612 Description : PLUG GAUGE AS PER DRG NO GW 00612()	Specification : PLUG GAUGE AS PER DRG NO GW 00612	S	Estab
90) GAUGE DRG NO GF 214615 SPW 06432 Description : GAUGE DRG NO GF 214615 SPW 06432()	Specification : GAUGE DRG NO GF 214615 SPW 06432	S	Estab
91) WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N Description : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N()	Specification : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N	S	Estab
92) WIRE CUT OPERATION TO MAKE A POCKET OF FIRING PIN Description : WIRE CUT OPERATION TO MAKE A POCKET OF FIRING PIN()	Specification : WIRE CUT OPERATION TO MAKE A POCKET OF FIRING PIN	S	Estab
93) TOOL ASSEMBLY FOR BENDING OPERATION T 25 66 0230 0 Description : TOOL ASSEMBLY FOR BENDING OPERATION T 25 66 0230 0()	Specification : TOOL ASSEMBLY FOR BENDING OPERATION T 25 66 0230 0	S	Estab

Category : ddp
Grade : 3
Size : S

1) Ordnance Factory Dumdum

[ENR Registration]

Name	Specification	Use	Status
1) JIG & FIXTURES Description : JIG & FIXTURES()	Specification : AS PER DRAWING	C	Estab

Category : dp
Grade : 3
Size : S

1) Ordnance Factory Dumdum

[ENR Registration]

Name	Specification	Use	Status
1) JIG & FIXTURES Description : JIG & FIXTURES()	Specification : AS PER DRAWING	C	Estab

Category : dp
Grade : 3
Size : S

1) Ordnance Factory Dumdum

[ENR Registration]

Name	Specification	Use	Status
1) CONE RING LARGE & PIN LOCATING TU ASSY Description : CONE RING LARGE & PIN LOCATING TU ASSY()	Specification : DET NO-62 SHT-1	C	Estab
2) FLEXIBLE DRIVE ADAPTOR Description : FLEXIBLE DRIVE ADAPTOR()	Specification : DRG NO- ARDE 9501-03 DET NO-12	C	Estab
3) FIN ASSEMBLY (WELDING) Description : FIN ASSEMBLY (WELDING)()	Specification : DRG.NO. ARDE 9501-03 DET NO. -13 SHT NO.-1	C	Estab
4) CONE RING Description : .Cone Ring in F C for TU-1111.()	Specification : Det.-6 shtt-2 to Drg.ARDE-2139	C	Estab
5) ASSY OF ADAPTOR AND CONE SPIDER IN FC Description : ASSY OF ADAPTOR AND CONE SPIDER IN FC()	Specification : DRG.NO.SK-2903	C	Estab

Category : dp
Grade : 3
Size : S

938

STANDARD AUTOGEARS PVT.LTD.
PLOT NO.705,INDUSTRIAL AREA, PHASE-9 MOHALI PUNJAB
PIN1 : 160062
Phone No. : 0172-5071125
GSTIN : 03AAACG8512E1Z5

AAACG8512E

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) MACHINING PART COMPONENT()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
2) SHEET METAL & FABRICATED COMPONENTS()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
3) AMMUNITIONS BOX COMPONENTS()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.

Category : DDP
Grade : III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) CHANNEL LEFT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/03/6-RFI.[70]()	Specification : CHANNEL LEFT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/03/6-RFI.	C	Nonestab
2) CHANNEL RIGHT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/03/7-RFI[70]()	Specification : CHANNEL RIGHT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/03/7-RFI	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) PLUNGER FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO.AR/01/26[70]()	Specification : PLUNGER FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO.AR/01/26	C	Nonestab

Category : p
Grade : Grade III
Size : S

939

SEW BIZSOL
E31, BHORESHWAR INDUSTRIAL ESTATE, BHOR PUNE MAHARASHTRA
PIN1 : 412206
Phone No. : 02113-222763
GSTIN : 27AGGPC9519C1ZL

PNES32670B

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) REAR AXLE ASSY.(9069112351)()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
2) FRONT AXLE ASSY.(9069112350)()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.

Category : DP
Grade : I
Size : S

940

NAVAM INDUSTRIES,
RAM MANDIR ROAD, YAVATMAL, MAHARASHTRA
PIN1 : 445001
Phone No. : 07232243013
GSTIN : 27AABFN2288E1ZC

NGPN00491B

Download

1) Ordnance Factory Bolangir

Name	Specification	Use	Status
1) DISC()	DRG. NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.	C	Not Estab.

Category : P
Grade : III
Size : S

1) Cordite Factory Arvankadu

Name	Specification	Use	Status
1) PRESS PHAN BOARD, AMMN. GR-I[14]()	Specification : JSS 5970-11-2009	R	Estab
2) UNVARNISHED HALLOW PAPER TUBE[14]()	Specification : C.F. NO.12.5, DT. 17-01-95, C.F. SKETCH NO. 765, DT. 02-12-88	R	Estab

Category : DP
Grade : II
Size :

1) Ordnance Factory Bolangir

[ENR Registration]

Name	Specification	Use	Status
1) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014 Description : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014()	Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95.	C	Estab
2) DISC-II NO.23 Description : DISC-II NO.23()	Specification : SPECIFICATION : OST-84-796-78, INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAGED CALANDER AMMN TO JSS:8135-13:2007, REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS:9310-01:2007-REV.2.	C	Estab
3) NORMAL COVER TO DRG.3-022483/54-bH- 482 Description : NORMAL COVER TO DRG.3-022483/54-bH- 482()	Specification : NORMAL COVER TO DRG.3-022483/54-bH- 482/Cd18,DC NO.36134-A, DTD.04.07.96	C	Estab
4) DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO Description : DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO()	Specification : DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO. 35983-A DT.29.7.95 MATERIAL:MILL BOARD TO JSS:9310-01-2014 REV-3 DC -5290 ME DT.16.12.14	C	Estab
5) DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5 Description : DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5()	Specification : DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5 PART NO.ISV-483 GA. DCI 35983-A Dt.29.07.95 MATERIAL : MILL BOARD TO JSS:9310-01-2014 REV-3 DC 5290 ME DT 16-12-14	C	Estab
6) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA Description : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA()	Specification : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95. MATERIAL: MILL BOARD TO JSS-9310-01-2014 REV-3 DC.5290 ME DTD-16-12-14	C	Estab
7) STRENGTHENED COVER TO DRG.3-022483 Description : STRENGTHENED COVER TO DRG.3-022483()	Specification : STRENGTHENED COVER TO DRG.3-022483 /54-bH-482/12,DC NO.36134-A, DT.04.07.96	C	Estab
8) PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO Description : PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO()	Specification : PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO MATERIAL SPECN.PAPER CRAFT AMMN.TO JSS 8135-017:2002, REAF-2010 DC-5016-ME , DT-16.03.11	C	Estab
9) TUBE, PAPER TO DRG.NO.ISX 18 SA DESIGNER'S REF NO-CIA/AMN Description : TUBE, PAPER TO DRG.NO.ISX 18 SA DESIGNER'S REF NO-CIA/AMN()	Specification : TUBE, PAPER TO DRG.NO.ISX 18 SA DESIGNER'S REF NO-CIA/AMN/1900. DCI 35462-A DT.03.03.93 .	C	Estab
10) MILL BOARD DISC TO SIZE:93MM DIA x 3MM THICK (WAXED), Description : MILL BOARD DISC TO SIZE:93MM DIA x 3MM THICK (WAXED),()	Specification : MILL BOARD DISC TO SIZE:93MM DIA x 3MM THICK (WAXED), DRG.NO:CIA/AMN/2650, DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 . ITEM NO. 5, MATERIAL:MILL BOARD TO JSS:9310-01-2014-Rev-3 DC-5290 ME DT.16.12.2014.	C	Estab

Category : p
Grade : 3
Size : S