List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1101 MISHRA DHATU NIGAM LIMITED
CORPORATE OFFICE KANCHANBAGH PO HYDERABAD Telangana
PIN1 : 500058
Phone No. : 24184310
GSTIN : 36AABCM63C45A1Z 		AABCM6345A

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PRE FORM BLANK TO OFAJ DRG NO FS 2700 B MADE OF FORGED STEEL SAE 4130 CONVERTED TO ESR GRADE Description : PRE FORM BLANK TO OFAJ DRG NO FS 2700 B MADE OF FORGED STEEL SAE 4130 CONVERTED TO ESR GRADE() Specification : PRE FORM BLANK TO OFAJ DRG NO. FS-2700 B MADE OF FORGED STEEL SAE-4130 CONVERTED TO ESR GRADE C Estab
Category : ddp
Grade : 3
Size : L
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) RHA PLATE 1830mm x 1830mm x 275mm LxBxT[01]() Specification : SPECIFICATION DEF-STAN-95-13. (ISSUE 4 date. 2-11-2011) P Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231 Description : ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231() Specification : ROLLED HOMOGENEOUS ARMOUR (RHA) PLATES SIZE:1200X1500X230MM TYPE`2`MATERIAL AS PER SPECIFICATION DEF STAN 95-13 LATESTISSUE ie. ISSUE NO.4. P Nonestab
Category : ddp
Grade : 3
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Rear Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
Category :
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Wind Shield Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
2) Driver Side Glass with gun port hole with rubber beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
3) Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
4) Co Driver Side Glass with gun port hole with rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
Category :
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) RING() 172.11.073/F C Not Established
2) RELEASE RING FORGING() 172.40.225-1/F C Not Established
3) ROAD WHEEL ARM OF 1ST, 2ND, 6TH() 172.51.021 C Not Established
4) REQUIREMENT OF FORGINGS (APPROX. 139 TYPES)() AS PER DRG C Not Established
5) PACKING RINGS() 172.35.027-1 C Not Established
Category : P
Grade : I
Size : L
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) RHA PLATE SIZE 1830X1830X230MM DS95 LF NO 0430020229 Description : RHA PLATE SIZE 1830X1830X230MM DS95 LF NO 0430020229() Specification : ROLLED HOMOGENEOUS ARMOUR PLATE SIZE: 1830 X 1830 X 230 MM THICK, TYPE 2 MATERIAL, AS PER SPECIFICATION: DEF STAN 95-13, ISSUE NO.4 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARMOUR PLATE 1000X2000X150MM ARMOX LF 0430020150 Description : ARMOUR PLATE 1000X2000X150MM ARMOX LF 0430020150() Specification : HOMOGENEOUS ARMOUR PLATE SIZE 1000 X 2000 X 150 MM THICK TO SPECIFICATION ARMOX-12560(MIL-A-12560 H). R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARMOUR PLATE 1200X2400X15MM DEF 95 LF 0430020215 Description : ARMOUR PLATE 1200X2400X15MM DEF 95 LF 0430020215() Specification : ROLLED HOMOGENEOUS ARMOUR (RHA) PLATES SIZE:1200X2400X15MM TYPE`1`MATERIAL AS PER SPECIFICATION DEF STAN 95-13 LATESTISSUE ie.ISSUE NO.4. R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARMOUR PLATE 1500X1500X20MM DEF 95 LF 0430020219 Description : ARMOUR PLATE 1500X1500X20MM DEF 95 LF 0430020219() Specification : ROLLED HOMOGENEOUS ARMOUR (RHA) PLATES SIZE:1500X1500X20MM TYPE`1`MATERIAL AS PER SPECIFICATION DEF STAN 95-13 LATESTISSUE ie.ISSUE NO.4. R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY[9911356459]() Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB. E Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 1000 LBS MK-II(N) HE (N&T) EMP[99]() Specification : EMPTY ASSY.BOMB HE A/C M.C. 1000 LBS ( 450 KG ) MK-II (N) NOSE & TAIL EXPLODERED TO DRG. NO. ARM-1482 D2. R NO -2.DT. 30-06-05. E Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 450 KG HSLD EMPTY ASSY ARDE-2122[99]() Specification : HIGH SPEED LOW DRAG , 450 KG MC/HE, A/C BOMB EMPTY ASSEMBLY TO DRG NO ARDE-2122 DETAIL-1, 2SHEET- SHEET NO.1 R.NO.1DT.7-3-91 & 2 DT.11-04-07. SHEET NO 2 R.1 DT.7-3-91 & 2 DT13-4-07. E Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) COMPOSITE ARMOUR (RHS) & (LHS)[90]() Specification : COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/E C Nonestab
2) JACKAL ARMOUR PLATE, A-CATEGORY[90]() Specification : JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(RE R Nonestab
3) HR SHEET 4 MM X 1250 X 2500[90]() Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK) R Nonestab
4) MIDHANI MAKE MDN 45 PLATE[90]() Specification : "MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/0 R Estab
5) SPADE M1 HEAT TREATED ARMOUR PLATE[90]() Specification : PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN) R Nonestab
6) SPADE M1 HEAT TREATED ARMOUR PLATE 16 MM[90]() Specification : PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN) R Nonestab
7) SPADE M1 HEAT TREATED ARMOUR PLATE 24 MM[90]() Specification : PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN) R Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) COMPOSITE ARMOUR (RHS) & (LHS)[90]() Specification : COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/E C Nonestab
2) JACKAL ARMOUR PLATE, A-CATEGORY[90]() Specification : JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(RE R Nonestab
3) HR SHEET 4 MM X 1250 X 2500[90]() Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK) R Nonestab
4) MIDHANI MAKE MDN 45 PLATE[90]() Specification : "MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/0 R Estab
5) SPADE M1 HEAT TREATED ARMOUR PLATE[90]() Specification : PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN) R Nonestab
6) SPADE M1 HEAT TREATED ARMOUR PLATE 16 MM[90]() Specification : PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN) R Nonestab
7) SPADE M1 HEAT TREATED ARMOUR PLATE 24 MM[90]() Specification : PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN) R Nonestab
8) SPALL LINER[90]() Specification : SPALL LINER AS PER SPECIFICATION NO. VFJ/ODC/TATA407 BS-IV SPALL LINER/01 DTD. 30/01/2019, AS PER ANNEXURE A C Nonestab
9) MODIFIED COMPOSITE ARMOUR RHS AND LHS FOR UPGRADED MPV 4X4 DRG NO 26875731[90]() Specification : ODC-VFJ/SP/COMPOSITE ARMOUR/02 Dated 23.10.2019 R Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) TRACK ASSEMBLY / 613.44.22CB-D1[06]() Specification : T 72 TRACK ASSEMBLY E Nonestab
Category : p
Grade : Grade I
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) ROUND 56 MM DIA LFNO. 0412702056[04]() Specification : GOST 4543-71 R Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) ALL TYPES OF STEEL SHEET AND STEEL ROUND Description : ALL TYPES OF STEEL SHEET AND STEEL ROUND() Specification : AS PER REQUIRED/SPEC./IS/BS R Estab
2) FORGING & MACHINING PRODUCTS Description : FORGING & MACHINING PRODUCTS() Specification : AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS R Estab
3) STEEL ROD OF VARIOUS THICKNESS TO SPECIFICATION STA 59 Description : STEEL ROD OF VARIOUS THICKNESS TO SPECIFICATION STA 59() Specification : TO SPECIFICATION STA 59/STA 60 R Estab
4) Armour Steel Plate Description : Armour Steel Plate() Specification : As per GCF/Drg/Size/specn/STA60/IS/BIS/ASW/DIN R Estab
Category : ddp
Grade : 2
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) HEAT TREATED FORGED AND MACHINED BLANK FOR NOZZLE FRONT Description : HEAT TREATED FORGED AND MACHINED BLANK FOR NOZZLE FRONT() Specification : HEAT TREATED FORGED AND MACHINED BLANK FOR NOZZLE FRONT AS PER DRG. NO. SK-9429/A C Estab
2) FORGED PROOF MACHINED BLANK FIN CYLINDER Description : FORGED PROOF MACHINED BLANK FIN CYLINDER() Specification : FORGED PROOF MACHINED BLANK FIN CYLINDER TO DRG. NO. SK- 8928/D C Estab
3) Maraging Steel Rod Dia 6.8 X 235 mm Description : Maraging Steel Rod Dia 6.8 X 235 mm() Specification : As per Specification R Estab
Category : p
Grade : 2
Size : M
1102 SIT FLEXIBLE HOSE PVT LTD
SURVEY NO 1350 BLOCK NO 698/3 AJWA RAMESHRA ROAD VILLAGE GUTAL WAGHODIA VADODARA Gujarat
PIN1 : 391760
Phone No. : 84022961
GSTIN : 24AAKCS2010H1ZS 		BRDS06615A

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 1 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 1) FOR UPGRADED MPV 4X4 E Nonestab
2) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 2 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 2) FOR UPGRADED MPV 4X4 E Nonestab
3) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 3 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 3) FOR UPGRADED MPV 4X4 E Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) HOSE ASSY() DRG NO. 54.28.67CB-1CB C Not Established
2) HOSE ASSY() DRG NO. 172.31.095CBCB C Not Established
Category : P
Grade : III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) EXHAUST HOSE TO PART NO 1135600[90]() Specification : EXHAUST HOSE TO PART NO 1135600 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) HOSE ASSY[06]() Specification : HOSE ASSY / 172.31.095CBCB E Nonestab
Category : p
Grade : Grade III
Size : S
1103 SUPER FORGINGS & STEELS LTD
35B/3, IInd MAIN ROAD AMBATTUR INDUSTRIAL ESTATE CHENNAI Tamil Nadu
PIN1 : 600058
Phone No. : 26253236
GSTIN : 33AAECS0764Q1ZZ 		AAECS0764Q

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NORMALISED AND PEELED CARBON STEEL ROUND BAR SIZE 41 00 0 1 MM DIA Description : NORMALISED AND PEELED CARBON STEEL ROUND BAR SIZE 41 00 0 1 MM DIA() Specification : NORMALISED AND PEELED CARBON STEEL ROUND BAR SIZE 41 00 0 1 MM DIA R Estab
Category : ddp
Grade : 3
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Steel round Dia 140x3000mm() GOST: 4543-71 R NOT ESTABLISHED
2) ROUND Ø 70X3000 MM LG ST GR: 38XC, GOST: 4543-71, HOT ROLLED FORGEABLE QUALITY IN ANNEALED CONDITION. () GOST: 4543-71 R NOT ESTABLISHED
Category : DDP
Grade : II
Size : M
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) HOT ROLLED PLUS COLD DRAWN CARBON STEEL ROUNDS TO SPE00CN BS 970 PT I 1983 GRADE 08040 HAVING STRAIGHT LENGTH OF 3 MTRS 15 PERCE MAX SHORTS DOWN FROM 2 TO 3 MTRS PERMITTED SIZE 31 MINUS POINT 062 MM DIA Description : HOT ROLLED PLUS COLD DRAWN CARBON STEEL ROUNDS TO SPE00CN BS 970 PT I 1983 GRADE 08040 HAVING STRAIGHT LENGTH OF 3 MTRS 15 PERCE MAX SHORTS DOWN FROM 2 TO 3 MTRS PERMITTED SIZE 31 MINUS POINT 062 MM DIA() Specification : HOT ROLLED PLUS COLD DRAWN CARBON STEEL ROUNDS TO SPE00CN BS 970 PT I 1983 GRADE 08040 HAVING STRAIGHT LENGTH OF 3 MTRS 15 PERCE MAX SHORTS DOWN FROM 2 TO 3 MTRS PERMITTED SIZE 31 MINUS POINT 062 MM DIA R Estab
Category : dp
Grade : 3
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) 20X2H4A GOST 4543 71 HOT ROLLED FORGED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500220 Description : 20X2H4A GOST 4543 71 HOT ROLLED FORGED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500220() Specification : 20X2H4A(DIA.220) R Estab
2) 38XC GOST 4543 71 HOT ROLLED FORGED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0353300250 Description : 38XC GOST 4543 71 HOT ROLLED FORGED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0353300250() Specification : 38XC(DIA.250) R Estab
3) HEXAGON GR 38xC 36MM A FX 2000MM LG STL HOT ROLLED AND ANNEALED TO 0353340036 Description : HEXAGON GR 38xC 36MM A FX 2000MM LG STL HOT ROLLED AND ANNEALED TO 0353340036() Specification : GOST:4543-71(36A/F) R Estab
4) HEXAGON GR 38xC 41MM A F STEEL HOT RPLLED AND ANNEALED TO 0353340041 Description : HEXAGON GR 38xC 41MM A F STEEL HOT RPLLED AND ANNEALED TO 0353340041() Specification : GOST:4543(41A/F) R Estab
5) ROUND ST EN16 40 MM DIA TO 0283002038 Description : ROUND ST EN16 40 MM DIA TO 0283002038() Specification : BS:970(40)EN16 R Estab
6) ROUND ST EN36A 63MM DIA TO 0412002064 Description : ROUND ST EN36A 63MM DIA TO 0412002064() Specification : BS:970(63)EN36A R Estab
7) ROUND ST EN16 U O PV572 0718 3032 DIA 32MM TO 0283002032 Description : ROUND ST EN16 U O PV572 0718 3032 DIA 32MM TO 0283002032() Specification : BS:970(32)EN16 R Estab
8) PLATE MILD ST 28 THKx1250 WDTHx2500MM LG TO 0101020286 Description : PLATE MILD ST 28 THKx1250 WDTHx2500MM LG TO 0101020286() Specification : IS:2062(28THK) R Estab
9) PLATE MILD STEEL 32MM THK TO 0112020320 Description : PLATE MILD STEEL 32MM THK TO 0112020320() Specification : IS:2062(32) R Estab
10) PLATE MILD ST 40MMTHKX1250MMX2500MM TO 0112020381 Description : PLATE MILD ST 40MMTHKX1250MMX2500MM TO 0112020381() Specification : IS:2062(40) R Estab
11) ANGLE EQUAL M S TO 0101070087 Description : ANGLE EQUAL M S TO 0101070087() Specification : IS:808-99(50X50X6) R Estab
12) SHEET GR ST 15 4 II 1 5MMX1000MMX2000MM TO 0122022444 Description : SHEET GR ST 15 4 II 1 5MMX1000MMX2000MM TO 0122022444() Specification : GOST:16523-70(1.5) R Estab
13) PLATE U O 188 83 019 TO 0122022625 Description : PLATE U O 188 83 019 TO 0122022625() Specification : GOST:19903-74(10MM) R Estab
Category : p
Grade : 2
Size : M
1104 Kisaan Die Tech Pvt.Ltd.
Plot No.A7/47/13 A-7 7/5 SSGT Road, IND Area,Electro Steel Compound Ghaziabad Uttar Pradesh
PIN1 : 201009
Phone No. : 4307787
GSTIN : 09AACCK5691C1ZH 		DELKO7514D

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHELL BODY W D BAND 30MM GHASHA HEI LF 9911356875[99]() Specification : EMPTY BODY WITH BAND TO DRG NO.____5.500.009 C /C (SHEET NO 3&4 OF K-2), DRG NO __ 8.035.304/c (SHEET NO 14&15 OF KD-2) AND PROGRAMME & TEST PROCEDURE AS PER SPECN:-__ 5.500.009__M/C (SHEET NO 5 TO 13 OF KD-2) R Nonestab
2) NOSE PLUG FOR 76 62 SRGM LF 9911357313[99]() Specification : NOSE PLUG TO DRG.NO. TRD-2-1-1986. R Nonestab
3) SHELL BODY FOR 20MM AMR TPT LF 9911357893[99]() Specification : SHELL BODY D/B STAMPING & PAINTING DRG.NO.-KHRD-1/7 FOR 20MM AMR TPT R Nonestab
Category : p
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) BODY() 175-47-027/F C Not Estab
Category : P
Grade : II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) FORGED HEAD UN MACHINED FOR 100 120 KG AERIAL BOMB ITEM NO 6220300144 FOR AVR2019[02]() Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310/FORGE AND TERMS & CONDITIONS ENCLOSED C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
2) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
3) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
4) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
5) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
6) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT " C Nonestab
7) HEX SOCKET SET SCREW 450 KG 6230001304[62]() Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP). C Nonestab
8) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
9) Protecting Ring Assly 1000LBS (6220900610)[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG. NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES], CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER 8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP C Nonestab
10) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
11) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
12) HEX SOCKET SET SCREW BT 450 KG 1727041225[17]() Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP) C Nonestab
13) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
14) SOCKET SET SCREW FOR BASE TRANSIT 1751020207[17]() Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED]. C Nonestab
15) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
16) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
17) TA LINK FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
18) SET OF TA SHOE AND TA GUIDE FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
19) TA CLAMP FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
20) TA LINK MACHINED FOLLOWED BY FORGING[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
21) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]() Specification : AS PER SPECIFICATION C Nonestab
22) TA CLAMP MACHINED FOLLOWED BY FORGING[99]() Specification : AS PER SPECIFICATION C Nonestab
23) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
24) TA PIN BLANK T-90 (6120100118)[61]() Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO OFM/TDS/TECH/O6A. C Nonestab
25) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
26) PLUG 450 KG 6231101105[62]() Specification : PLUG [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
27) TA BOLT M-20 (6120100107)[61]() Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840 DRG.ENCLOSED. C Nonestab
28) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Estab
29) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
30) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
31) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
32) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
33) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
34) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
35) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
36) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
37) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
38) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
39) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
40) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
41) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
42) ROLLING RING ASSEMBLY 250KG (6241100114)[62]() Specification : ROLLING RING ASSY. TO DRG No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED] C Nonestab
43) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
44) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
45) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
46) HEX SOCKET HD CAP SCREW M6X25 1732040625[17]() Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT]. C Nonestab
47) HEX SOCKET SET SCREW M5 450KG 6230901104[62]() Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP) C Nonestab
48) SCEWFOR RING NUT 6220900800[62]() Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED] C Nonestab
49) LOCKING SCREW FOR CONT EXPLODER 6220900710[62]() Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED]. C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Rear Axle Shaft RH Finish[90]() Specification : Rear Axle Shaft RH (Finish) Part No 2614 3570 7901 V1 C Nonestab
2) LPTA Rear Axle Shaft LH Finish[90]() Specification : Rear Axle Shaft LH (Finish) Part No 2614 3570 7901 V1 (OLD) C Nonestab
3) LPTA Forging for Rev Idler Gear[90]() Specification : Forging for Reverse Idler Gear LPTA 715 BS-III Part No 2691 2635 5407 3 (R1) C Nonestab
4) LPTA Forging for 2nd Speed Gear on Main Shaft[90]() Specification : Forging 2nd Speed Gear Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 0416 3 (R3) C Nonestab
5) LPTA Forging for 4th Speed Gear on Counter Shaft[90]() Specification : Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R) C Nonestab
6) LPTA Forging for Drive Shaft Front Axle[90]() Specification : Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1 C Nonestab
7) LPTA Forging for 4th Speed Gear on Main Shaft[90]() Specification : Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3 C Nonestab
8) LPTA Forging For 3rd Speed Gear on Main Shaft[90]() Specification : Forg 3rd Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5414 3 C Nonestab
9) LPTA Forging for 1st Speed Gear on Main Shaft[90]() Specification : Forging 1st Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5412 3 (R2) C Nonestab
10) LPTA Forging for Gear Front[90]() Specification : Forging for Gear Front Drg No 312 282 2211 50 R1 C Nonestab
11) LPTA Forging for Drive Shaft[90]() Specification : Forging for Drive Shaft Drg No 322 2820 301 50 ( R1) C Nonestab
12) LPTA Forging for Steering Lever LH RH[90]() Specification : Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50 C Nonestab
13) LPTA Forging for Flange Axle Housing[90]() Specification : Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1) C Nonestab
14) LPTA Forging for Steering Arm BS III[90]() Specification : Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3 C Nonestab
15) LPTA Forging for Gear Rear[90]() Specification : Forging for Gear Rear Drg No 322 2820 211 50 (R1) C Nonestab
16) LPTA Forging for King Pin Lower[90]() Specification : Foring for King Pin Lower 340 332 1306 3 (R2) C Nonestab
17) LPTA Forging for Shifter Sleeve AGB[90]() Specification : Foring for Shifter Sleeve AGB Drg No 322 2820 123 R1 C Nonestab
18) LPTA Forging for Over Drive Gear on Counter Shaft[90]() Specification : Forg Over Drive Gear on Counter Shaft LPTA BS-III Vehicle Drg No 2691 2630 5414 3 (R1) C Nonestab
19) LPTA Forging for Rev Gear on Main Shaft[90]() Specification : Reverse Gear M/S (Forging) Main Shaft LPTA 715 BS-III 2691 2620 5413 3 C Nonestab
20) LPTA Forging for Cont Mesh Gear on Counter Shaft[90]() Specification : Forging for Constant Mesh Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5413 3 C Nonestab
21) LPTA Forging for King Pin Upper[90]() Specification : Foring for King Pin Upper Part No 2574 3325 5102 3 R2 C Nonestab
22) LPTA Forging for Main Shaft[90]() Specification : Forging for Main Shaft BS-III LPTA 715 Part No 2691 2620 7911 3 C Nonestab
23) LPTA Forging for Counter Shaft GB[90]() Specification : Foring for Counter Shaft BS-III LPTA 715 Part No 2691 2630 0405 3 C Nonestab
24) LPTA Forging for Drive Shaft Rear Axle[90]() Specification : Forging for Drive Shaft 2574 2830 7901 3 (R2) C Nonestab
25) LPTA Forging for Follower[90]() Specification : Forging for Follower 00322 337 0417 50 C Nonestab
26) LPTA Forging for Coupling Flange RXL[90]() Specification : Forging for Coupling Flange Part No 2730 3530 5001 3 C Nonestab
27) LPTA Forging for Hub L A Lug Version[90]() Specification : Forging for Hub L A (Lug Version) 2574 3345 5102 50 C Nonestab
28) LPTA Forging for Coupling Flange AGB[90]() Specification : Forging for Coupling Flange DRG No 312 262 2045 3 (A) C Nonestab
29) LPTA Forging for Counter Shaft AGB[90]() Specification : Forging for Counter Shaft Drg No 322 2830 102 50 C Nonestab
30) LPTA Forging For 3rd Speed Gear on Counter Shaft[90]() Specification : 3rd Speed Counter Shaft (Forging) LPTA-715 Vehilce Part No / Drg No 2691 2630 5424 3 C Nonestab
Category : p
Grade : Grade III
Size : S
1105 ORIENTAL WEAVING & PROCESSING MILLS PVT LTD
D/64 T T C INDUSTRIES AREA MIDC TURBHE THANE DIST NAVI MUMBAI Maharashtra
PIN1 : 400705
Phone No. : 27683332
GSTIN : 27AAACP3167G1ZH 		MUMO05364C

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]() Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK. AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC NYLON 220 GSM WHITE WATER & OIL REPELLENT 100 CM() IND/TC/0160 AS PER RELEVANT CLAUSE OF SPECIFICATION R Not Estab.
Category : DP
Grade : II
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) Fabrication of P3 HD Parachute System at Firm Premises[2110025100]() Specification : ADRDE/1266, 1267(a),1270(a), 1272, 1279, 1278(a), 1246, 1248, 1253, 1249,1260, 1257,1259, 1258, 1293, 1275, 1261, 1256, 1265, 1247, 1287(a), 1274(a), 1277, 1254, 1280, 1264, 1263, 1251, 1268, 1255, 1281, 1269, 1250, 1286 and other textile R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PARACHUTE FOR PARA FLARE RED[62]() Specification : DRG NO. OFDR/CT/UI.SR.NO.71 DT.18-11-96. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PARACHUTE SYSTEM FOR 84 MM CARL GUSTAF ILLG AMMN GEN ASSY TO DRG NO[62]() Specification : DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND ) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
2) FABRIC NYLON ASSORTED COLOUR FOR BAG SLEEPING[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
3) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]() Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R Nonestab
4) FABRIC NYLON 66 LT. WEIGHT 56 GSM +/- 5 % : BLUE SHADE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
5) FABRIC NYLON 48 GMS OG P.U.COATED 122 CM. WIDTH[21]() Specification : MASS/M2-48+-2 GMS., B.S.- 65KGS, WRAP-55KGS, WEFT-PLAIN,THICKNESS-0.08 R Nonestab
6) FABRIC NYLON 250 GSM DISRUPTIVE PATTERN P.U. COATED 140/142 CMS WIDE[21]() Specification : SPECN.NO. IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH R Nonestab
7) FABRIC NYLON 250 GSM POLYURATHENE COATED DISRUPTIVE 91 CMS.[21]() Specification : VARIETY NO. 2 OF DMSRDE/T&GS/89/377 (b) R Nonestab
8) FABRIC NYLON 250 GMS. DISRUPTIVE POLYURETHENE COATED 135/136 CMS.[21]() Specification : IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/- R Nonestab
9) FABRIC NYLON 250 GMS DISRUPTIVE BSF PATTERN P.U.COATED 135/136 CM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
10) FABRIC NYLON 250 GMS BLACK PU COATED 135/136 CMS[21]() Specification : IND/TC/0155 R Nonestab
11) BOTH SIDE PVC COATED POLYESTER FABRIC WHITE WIDTH 100 CMS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
12) BOTH SIDE PVC COATED NYLON FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO. R Nonestab
13) BOTH SIDE PVC COATED NYLON FABRIC WITH F.R. TREATMENT 135 CM WIDE.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
14) BOTH SIDE PVC COATED NYLON FABRIC SAND COLOUR (SHADE NO.388 OF IS:5) WIDTH 100 CMS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
15) BOTH SIDE PVC COATED NYLON FABRIC OLIVE GREEN (SHADE NO. 220 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPP. AS PER APPENDIX-I OF DMSRDE SPECN. NO. R Nonestab
16) BOTH SIDE PVC COATED NYLON FABRIC LIGHT GREEN (SHADE NO. 218 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO. R Nonestab
17) FABRIC POLYAMIDE PLAIN WEAVE PU COATED 85 GMS DISRUPTIVE 150 CM WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
18) FABRIC NYLON 60 GRAM P.U. COATED O.G. 135 CM. WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
19) FABRIC NYLON FC/FR TREATED 95 "G" OG 100CM WIDE[21]() Specification : DMSRDE/T & GS/97/415/TEX -4/1(B) R Nonestab
20) FABRIC NYLON FC/FR TREATED 95 "G" OG 120 CM. WIDE[21]() Specification : DMSRDE/T & GS/97/415/tex-4/1(b) R Nonestab
21) FABRIC NYLON 250 GSM PU COATED 120 CMS O.G[21]() Specification : as per requirement R Nonestab
22) POLYESTER FABRIC HIGH TENACITY 1000 D BOTH SIDE PVC COATED 135CM WIDE IN GREY COLOUR[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
23) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS[21]() Specification : SPECN. NO. IND / TC / 0155 AND AS PER ANNEXURE 'A' ATTACHED R Nonestab
24) BREATHABLE RAIN COAT NYLON FABRIC NAVY BLUE 100 CMS. (MIN), 135 + - 10 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
25) FABRIC NYLON 300 GSM RIP STOP PU COATED F.R. 152[21]() Specification : IND/TC/0155 AND AS PER ANNEXURE "A' R Nonestab
26) BOTH SIDE PVC COATED POLYESTER FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO. R Nonestab
27) BOTH SIDE PVC COATED 650 GSM FIRE RETARDANT FABRIC 150 CM WIDE[21]() Specification : As per rquirement & specification R Nonestab
28) CANVAS NYLON 220 GRAM O.G 91 CMS[21]() Specification : IND/ADE/0065 (A) R Nonestab
29) CANVAS RAYON PVC COATED O.G. 91 CMS.[21]() Specification : DMSRDE/T&CS/83/306 R Nonestab
30) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.[21]() Specification : As per requirement & specification R Nonestab
31) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 63 GRMS.TYPE-II 122 CMS. WIDE.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
32) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 76 GRMS.TYPE-I 122 CMS.WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
33) FABRIC NYLON PVC COATED OG FLAME RETARDANT 135 CM WIDE[21]() Specification : DMSRDE/T&GS/83/306-EXCEPT THAT R Nonestab
34) FIRE RETARDENT PVC COATED FABRIC SAMPLE - A[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
35) NYLON CANVAS OG 220 GMS 100 CM WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
36) NYLON CANVAS UNPROOFED 220 GMS/100 CM WIDE[21]() Specification : DMSRDE/70/29 R Nonestab
37) FABRIC NYLON P.U.COATED 250GMS OG 100CM WIDTH.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
Category : P
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]() Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R Nonestab
2) BOTH SIDE PVC COATED 650 GSM FIRE RETARDANT FABRIC 150 CM WIDE[21]() Specification : As per rquirement & specification R Nonestab
3) BOTH SIDE PVC COATED NYLON FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO. R Nonestab
4) BOTH SIDE PVC COATED NYLON FABRIC LIGHT GREEN (SHADE NO. 218 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO. R Nonestab
5) BOTH SIDE PVC COATED NYLON FABRIC OLIVE GREEN (SHADE NO. 220 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPP. AS PER APPENDIX-I OF DMSRDE SPECN. NO. R Nonestab
6) BOTH SIDE PVC COATED POLYESTER FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS[21]() Specification : MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO. R Nonestab
7) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.[21]() Specification : As per requirement & specification R Nonestab
8) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 76 GRMS.TYPE-I 122 CMS.WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
9) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 63 GRMS.TYPE-II 122 CMS. WIDE.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
10) FABRIC NYLON P.U.COATED 250GMS OG 100CM WIDTH.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
11) FABRIC NYLON ASSORTED COLOUR FOR BAG SLEEPING[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
12) FABRIC NYLON 66 LT. WEIGHT 56 GSM +/- 5 % : BLUE SHADE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
13) FABRIC NYLON 250 GSM DISRUPTIVE PATTERN P.U. COATED 140/142 CMS WIDE[21]() Specification : SPECN.NO. IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH R Nonestab
14) FABRIC NYLON 250 GMS DISRUPTIVE BSF PATTERN P.U.COATED 135/136 CM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
15) FABRIC NYLON 250 GMS BLACK PU COATED 135/136 CMS[21]() Specification : IND/TC/0155 R Nonestab
16) BOTH SIDE PVC COATED POLYESTER FABRIC WHITE WIDTH 100 CMS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
17) BOTH SIDE PVC COATED NYLON FABRIC WITH F.R. TREATMENT 135 CM WIDE.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
18) BOTH SIDE PVC COATED NYLON FABRIC SAND COLOUR (SHADE NO.388 OF IS:5) WIDTH 100 CMS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
19) FABRIC POLYAMIDE PLAIN WEAVE PU COATED 85 GMS DISRUPTIVE 150 CM WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
20) FABRIC NYLON 250 GMS. DISRUPTIVE POLYURETHENE COATED 135/136 CMS.[21]() Specification : IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/- R Nonestab
21) CANVAS RAYON PVC COATED O.G. 91 CMS.[21]() Specification : DMSRDE/T&CS/83/306 R Nonestab
22) POLYESTER FABRIC HIGH TENACITY 1000 D BOTH SIDE PVC COATED 135CM WIDE IN GREY COLOUR[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
23) FABRIC NYLON 250 GSM POLYURATHENE COATED DISRUPTIVE 91 CMS.[21]() Specification : VARIETY NO. 2 OF DMSRDE/T&GS/89/377 (b) R Nonestab
24) FABRIC NYLON 48 GMS OG P.U.COATED 122 CM. WIDTH[21]() Specification : MASS/M2-48+-2 GMS., B.S.- 65KGS, WRAP-55KGS, WEFT-PLAIN,THICKNESS-0.08 R Nonestab
25) FABRIC NYLON 60 GRAM P.U. COATED O.G. 135 CM. WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
26) FABRIC NYLON FC/FR TREATED 95 "G" OG 120 CM. WIDE[21]() Specification : DMSRDE/T & GS/97/415/tex-4/1(b) R Nonestab
27) FABRIC NYLON FC/FR TREATED 95 "G" OG 100CM WIDE[21]() Specification : DMSRDE/T & GS/97/415/TEX -4/1(B) R Nonestab
28) CANVAS NYLON 220 GRAM O.G 91 CMS[21]() Specification : IND/ADE/0065 (A) R Nonestab
29) NYLON CANVAS OG 220 GMS 100 CM WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
30) NYLON CANVAS UNPROOFED 220 GMS/100 CM WIDE[21]() Specification : DMSRDE/70/29 R Nonestab
31) FABRIC NYLON PVC COATED OG FLAME RETARDANT 135 CM WIDE[21]() Specification : DMSRDE/T&GS/83/306-EXCEPT THAT R Nonestab
32) FIRE RETARDENT PVC COATED FABRIC SAMPLE - A[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
33) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
34) BREATHABLE RAIN COAT NYLON FABRIC NAVY BLUE 100 CMS. (MIN), 135 + - 10 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
35) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS[21]() Specification : SPECN. NO. IND / TC / 0155 AND AS PER ANNEXURE 'A' ATTACHED R Nonestab
36) FABRIC NYLON 300 GSM RIP STOP PU COATED F.R. 152[21]() Specification : IND/TC/0155 AND AS PER ANNEXURE "A' R Nonestab
37) FABRIC NYLON 250 GSM PU COATED 120 CMS O.G[21]() Specification : as per requirement R Nonestab
38) NYLON FABRIC O.G. POLYURETHANE COATED (250 GM/SQR M)91 CM[21]() Specification : SPECN. NO. IND/TC/2314 (a) R Nonestab
39) NYLON FABRIC 220 GMS O.G. 100 CM WIDE WATER & OIL REPELLENT[21]() Specification : PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B) R Nonestab
Category : P
Grade : II
Size :
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRICATION OF ASSEMBLY AS PER 1 4 R 4 5 AAIG 1 D 6[2110025121]() Specification : Fabrication of Assembly as per 1.4.R.4.5 / AAIG 1 -D(6) E Nonestab
2) FABRICATION OF ASSEMBLY AS PER 1 4 R 4 5 ABCA 5[2110025124]() Specification : FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/ABCA( 5) E Nonestab
Category :
Grade : Grade III
Size : S
1106 JAYASWAL NECO INDUSTRIES LTD.
SILTARA GROWTH CENTRE BHILAI CHATTISGARH
PIN1 : 440016
Phone No. : 07721-264241
GSTIN : 22AAACJ3174F1Z0 		JBPJ00355F

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) STEEL PRODUCTS() AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS C NOT ESTAB.
Category : DP
Grade : I
Size : L
1107 SAFETY SYNDICATE
N-214, SECTOR-5, DSIIDC INDUSTRIAL AREA, BAWANA DELHI DELHI
PIN1 : 110039
Phone No. : 011277910576
GSTIN : 07ABHPS3683D1ZH 		ABHPS3683D

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) LENS FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4 WITH MICRO FIBER CLEANING CLOTH OF SIZE 20 CM X 20 CM MADE OF 100% POLYESTER IN BLACK COLOUR. DETAILED SPECN. FOR LENS AS PER ANNEXURE.() AS PER SPECIFICATION C Not Estab.
2) FRAME FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4, WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE) DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4. DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS PER ANNEXURE() AS PER SPECIFICATION C Not Estab.
Category : P
Grade : II
Size : S
1108 EXCEL ENTERPRISES
PLOT # 9, SIDCO INDUSTRIAL ESTATE, KAKALUR TAMIL NADU
PIN1 : 602003
Phone No. : 9941714551
GSTIN : 33AACFE5539Q1Z2 		CHEE05053G

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) RING() 172.51.020/F C Not Established
2) Release Ring Forging() 172.40.225-1/F C Non Established
Category : P
Grade : II
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) FERROUS AND NON-FERROUS FORGINGS Description : FERROUS AND NON-FERROUS FORGINGS() Specification : from 500gm to 5 KG R Estab
2) bearing Description : bearing() Specification : C6-327-1 C Estab
3) middle and first brg cap Description : middle and first brg cap() Specification : 301 43 7/ 301-50-5 C Estab
4) Shaft Forging Description : Shaft Forging() Specification : 337-135 R Estab
Category : dp
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) CLAMP FORGING TO 3991081045 Description : CLAMP FORGING TO 3991081045() Specification : 187.81.006/F/PL C Estab
2) FLANGE FORGING TO 3991218050 Description : FLANGE FORGING TO 3991218050() Specification : 185.18.056/F/PL C Estab
3) ADAPTOR TO 3999849066 Description : ADAPTOR TO 3999849066() Specification : PV572.0711.2166/F/PL C Estab
4) SHAFT TO 3999849374 Description : SHAFT TO 3999849374() Specification : PV572.0711.3074/F/PL C Estab
5) GEAR SPL 1 TO 3999849380 Description : GEAR SPL 1 TO 3999849380() Specification : PV572.0711.3080/F/PL C Estab
6) HOUSING OIL SEAL TO 3999849388 Description : HOUSING OIL SEAL TO 3999849388() Specification : PV572.0711.3088/F/PL C Estab
7) END COVER TO 3999849396 Description : END COVER TO 3999849396() Specification : PV572.0711.3096/F/PL C Estab
8) GEAR SPL 1 TO 3999849402 Description : GEAR SPL 1 TO 3999849402() Specification : PV572.0711.3102/F/PL C Estab
9) GEAR SPL 2 TO 3999849406 Description : GEAR SPL 2 TO 3999849406() Specification : PV572.0711.3106/F/PL C Estab
10) STUD TO 6101041010 Description : STUD TO 6101041010() Specification : 188.41.003/PL C Estab
11) BUTTON BOLT TO 6206003122 Description : BUTTON BOLT TO 6206003122() Specification : 54.26.516 C Estab
12) BOLT TO 6206008346 Description : BOLT TO 6206008346() Specification : 175.01.170 C Estab
13) SCREW TO 6206109032 Description : SCREW TO 6206109032() Specification : 172.11.087 C Estab
14) BOLT TO 6206109070 Description : BOLT TO 6206109070() Specification : 172.11.131 C Estab
15) LOCKING BOLT TO 6206113086 Description : LOCKING BOLT TO 6206113086() Specification : 434.23.108 C Estab
16) BOLT TO 6206201064 Description : BOLT TO 6206201064() Specification : 172.15.058-1 C Estab
17) BUSH TO 6206203193 Description : BUSH TO 6206203193() Specification : 175.18.097 C Estab
18) UNION NUT TO 6206204039 Description : UNION NUT TO 6206204039() Specification : V548.0127.3002 C Estab
19) NUT TO 6206205332 Description : NUT TO 6206205332() Specification : 2A26.10-193 C Estab
20) BOLT TO 6206206100 Description : BOLT TO 6206206100() Specification : 432.21.123 C Estab
21) SET SCREW TO 6206206202 Description : SET SCREW TO 6206206202() Specification : 172.21.112 C Estab
22) NUT TO 6206213638 Description : NUT TO 6206213638() Specification : MB-164-31 C Estab
23) BOLT TO 6206304478 Description : BOLT TO 6206304478() Specification : 172.33.682-01 C Estab
24) BOLT TO 6206304479 Description : BOLT TO 6206304479() Specification : 172.33.682-02 C Estab
25) NUT TO 6206304494 Description : NUT TO 6206304494() Specification : 172.66.058 C Estab
26) NUT TO 6206308162 Description : NUT TO 6206308162() Specification : 172.45.114-1 C Estab
27) SCREW TO 6206403044 Description : SCREW TO 6206403044() Specification : 54.34.199 C Estab
28) LOCK WASHER TO 6206411094 Description : LOCK WASHER TO 6206411094() Specification : 172.51.013-1 C Estab
29) BOLT TO 6206413026 Description : BOLT TO 6206413026() Specification : 175.53.023 C Estab
30) SCREW TO 6206416046 Description : SCREW TO 6206416046() Specification : 155.15.129 C Estab
31) BOLT TO 6206417107 Description : BOLT TO 6206417107() Specification : 54.22.018 C Estab
32) BOLT TO 6206417163 Description : BOLT TO 6206417163() Specification : CQA(HV)5.61.000 C Estab
33) STUD TO 6206418036 Description : STUD TO 6206418036() Specification : 172.62.067 C Estab
34) RING TO 6206418139 Description : RING TO 6206418139() Specification : 432.62.127 C Estab
35) SHACKLE TO 6206419203 Description : SHACKLE TO 6206419203() Specification : 432.63.135 C Estab
36) PIN TO 6206801236 Description : PIN TO 6206801236() Specification : 172.01.686 C Estab
37) PIN TO 6206802190 Description : PIN TO 6206802190() Specification : 172.03.089 C Estab
38) BOSS TO 6206804575 Description : BOSS TO 6206804575() Specification : 172.04.750 C Estab
39) BOSS TO 6206831237 Description : BOSS TO 6206831237() Specification : 172.01.659 C Estab
40) BOLT TO 6206831239 Description : BOLT TO 6206831239() Specification : 172.01.677-1 C Estab
41) STUD TO 6206851110 Description : STUD TO 6206851110() Specification : 172.25.104 C Estab
42) SCREW TO 6206851111 Description : SCREW TO 6206851111() Specification : 172.25.101-1 C Estab
43) BOSS TO 6209801213 Description : BOSS TO 6209801213() Specification : PV572.0734.3010 C Estab
44) BOLT TO 7002908020 Description : BOLT TO 7002908020() Specification : GOST:7796(M8X20.88) C Estab
45) BOLT TO 7005312039 Description : BOLT TO 7005312039() Specification : 3M12X1.25-6GX40.88.38XC.016 C Estab
46) SCREW TO 7010006020 Description : SCREW TO 7010006020() Specification : GOST:1476(M6X20) C Estab
47) SCREW TO 7012403000 Description : SCREW TO 7012403000() Specification : BM3-6GX6.46.016 C Estab
48) SCREW TO 7012404006 Description : SCREW TO 7012404006() Specification : BM4.6GX6.46.016 C Estab
49) SCREW TO 7012404010 Description : SCREW TO 7012404010() Specification : M4.6GX10.46.016 C Estab
50) SCREW TO 7012404018 Description : SCREW TO 7012404018() Specification : BM4-6GX18.46.016 C Estab
51) SCREW TO 7012404022 Description : SCREW TO 7012404022() Specification : M4.6GX22.46.016 C Estab
52) SCREW TO 7012404025 Description : SCREW TO 7012404025() Specification : M4-6GX25.46.016 C Estab
53) SCREW TO 7012405014 Description : SCREW TO 7012405014() Specification : BM5-6GX14.46.016 C Estab
54) SCREW TO 7012405022 Description : SCREW TO 7012405022() Specification : M5-6GX22.32.016 C Estab
55) SCREW TO 7012406014 Description : SCREW TO 7012406014() Specification : BM6-6GX14.46.016 C Estab
56) SCREW TO 7012406025 Description : SCREW TO 7012406025() Specification : M6-6GX25.46.016 C Estab
57) SCREW TO 7012603025 Description : SCREW TO 7012603025() Specification : BM3-6GX25.46.016 C Estab
58) SCREW TO 7012604010 Description : SCREW TO 7012604010() Specification : M4-6GX10.46.016 C Estab
59) SCREW M4 6GX14 46 016 TO 7012604014 Description : SCREW M4 6GX14 46 016 TO 7012604014() Specification : GOST:1491(M4X14) C Estab
60) SCREW TO 7012606016 Description : SCREW TO 7012606016() Specification : M6.6GX16.46.016 C Estab
61) SCREW TO 7012606025 Description : SCREW TO 7012606025() Specification : BM6-6GX25.46.016 C Estab
62) SCREW TO 7012606030 Description : SCREW TO 7012606030() Specification : GOST:1491(M6X30) C Estab
63) SCREW BM6 6GX40 46 016 TO 7012606040 Description : SCREW BM6 6GX40 46 016 TO 7012606040() Specification : GOST:1491(BM6X40) C Estab
64) SCREW TO 7012606050 Description : SCREW TO 7012606050() Specification : BM6-6GX50.46.016 C Estab
65) SCREW TO 7012608025 Description : SCREW TO 7012608025() Specification : BM8.6G.25X46.016 C Estab
66) SCREW M6 6GX16 46 016 TO 7013506016 Description : SCREW M6 6GX16 46 016 TO 7013506016() Specification : GOST:17473-80(M6X16) C Estab
67) SCREW TO 7013603006 Description : SCREW TO 7013603006() Specification : M3-6GX6.46.016 C Estab
68) SCREW TO 7013603008 Description : SCREW TO 7013603008() Specification : BM3.6GX8.46.016 C Estab
69) SCREW TO 7013604006 Description : SCREW TO 7013604006() Specification : BM4-6GX6.46.016 C Estab
70) SCREW TO 7013606001 Description : SCREW TO 7013606001() Specification : M6.6GX10.46.016 C Estab
71) SCREW TO 7013606014 Description : SCREW TO 7013606014() Specification : GOST:17473(BM6X14) C Estab
72) SCREW TO 7013606016 Description : SCREW TO 7013606016() Specification : BM6-6GX16.46.016 C Estab
73) SCREW B1M6 6G 20 46 016 TO 7013606020 Description : SCREW B1M6 6G 20 46 016 TO 7013606020() Specification : GOST:17473(B1M6X20) C Estab
74) SCREW TO 7013705030 Description : SCREW TO 7013705030() Specification : BM5-8GX30.46.016 C Estab
75) SCREW TO 7013804012 Description : SCREW TO 7013804012() Specification : BM4-6GX12.46.016 C Estab
76) SCREW TO 7013804016 Description : SCREW TO 7013804016() Specification : M4.6GX16.46.016 C Estab
77) SCREW BM6 6GX16 46 016 TO 7013806016 Description : SCREW BM6 6GX16 46 016 TO 7013806016() Specification : GOST:17473(BM6X16) C Estab
78) SCREW TO 7015004014 Description : SCREW TO 7015004014() Specification : BM4-6GX14.46.016 C Estab
79) STUD TO 7017308200 Description : STUD TO 7017308200() Specification : M8X1-6GX20.46.05 C Estab
80) NUT TO 7020708050 Description : NUT TO 7020708050() Specification : GOST:2526(M8) C Estab
81) BOSS TO 7045208046 Description : BOSS TO 7045208046() Specification : OST:3-1496-72(M8X16X25) C Estab
82) BOSS TO 7045212108 Description : BOSS TO 7045212108() Specification : OST:3-1496-72(M12X22X95) C Estab
83) BOLT TO 7403112018 Description : BOLT TO 7403112018() Specification : 8PM.920.002-3 C Estab
Category : p
Grade : 2
Size : S
1109 SUNSHINE FINE CHEMSOL(I) PVT.LTD.
S.NO. 567, B-1, VASTUNAGAR SOCIETY, NEAR MARKET YARD, BIBWEWADI PUNE MAHARASHTRA
PIN1 : 411037
Phone No. : 09011050347
GSTIN : 27AAJCS6669M1ZF 		PNES22122C

Download 		1) High Explosive Factory
Name Specification Use Status
1) SODIUM SULPHITE ANHYDROUS() IS 247:1987 REAFF 2010 IVTH REV R NOT ESTAB
2) DIMETHYL FORMAMIDE() HEF/IO/65 DATED 21.12.95 R NOT ESTAB
3) METHANOL() IS 517:1986 REAFF 1996 R NOT ESTAB
4) DIMETHYL ANILINE() JSS 6810-85-2011 (IIND REV) DC NO.5057-ME DATED 12.12.2011 LATEST ISSUE R NOT ESTAB
Category : P
Grade : I
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Sodium Nitrate[10]() Specification : IS 12681 - 1989 R Nonestab
2) PENTA ERYTHRITOL[10]() Specification : IND/ME/799 (a) R Nonestab
3) Potassium Nitrate Gr.I[10]() Specification : IS:301-1982 ( IInd Rev.) R Nonestab
4) Basic lead stearate[10]() Specification : Specn-IND/ME/843 Proo DC(1) 2410ME DTD 26.12.87 R Nonestab
Category : P
Grade : II
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Aluminium Stearate Description : Aluminium Stearate() Specification : ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.. R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BARIUM PEROXIDE GR.I Description : BARIUM PEROXIDE GR.I() Specification : BARIUM PEROXIDE GR.I TO JSS-6810-96 -2011-REV-2 ADMT-1 DC NO 5081 ME, DT.06.08.2012. R Estab
Category : p
Grade : 3
Size : S
1110 DIVINE TUBES PRIVATE LIMITED
414, PHASE-I, G.I.D.C, CHATTRAL GANDHI NAGAR GUJARAT
PIN1 : 382729
Phone No. : 02764232402
GSTIN : 24AABCD9957B1ZQ 		AHMD03737G

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) STAINLESS STEELS / TUBES / PIPES-SEAMLESS & WELDED() AS PER DRAWING / SPECIFICATIONS R Not Estab
Category : DP
Grade : II
Size : S
1111 KEMS FORGINGS LIMITED
NO. B-35, KIADB INDUSTRIAL AREA, HOSKOTE, BANGALORE TAMIL NADU
PIN1 : 562114
Phone No. : 080-27971165, 27971166, 9845052606
GSTIN : 29AABCS8846CZ15 		BLRS05136F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) BUSH() DRG NO. 172.51.026/F C Not Established
Category : P
Grade : III
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
2) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT " C Nonestab
3) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
5) FORGING OF TA LINK (6120100104)[61]() Specification : FORGING FOR T.A.LINK TO DRG.NO.OFM-32851. (DRG.ENCLOSED). (OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS TECH/04. C Nonestab
6) FORGING OF TA GUIDE (6120100103)[61]() Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED). (OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03. C Nonestab
7) FORGING OF TA SHOE (6120100101)[61]() Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED. C Nonestab
8) FORGING OF TA CLAMP (6120100102)[61]() Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ). (OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED. C Nonestab
Category : ddp
Grade : 3
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
2) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
3) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
4) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
5) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
6) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
Category : ddp
Grade : 3
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) TOP CLAMP AD Description : TOP CLAMP AD() Specification : TOP CLAMP (AD) DRG./PART NO. F-0846411-V1 C Estab
Category : ddp
Grade : 2
Size : L
1112 AUTOMECH SYSTEMS
UNIT4,FERROUS METALS COMPOUND,RAGHUNATH NAGAR,NEAR TEEN HATH NAKA THANE MAHARASHTRA
PIN1 : 400604
Phone No. : 9321657503
GSTIN : 27AAIFA6565C1ZI 		PNEA11932E

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) BRACKET () DRG.NO.675-54-183 C Not Estab
Category : P
Grade : III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) Manufacturing and Supply of Housing Support to Drg No DW 1108 3003 12[71]() Specification : Manufacturing and Supply of Housing Support to Drg No DW 1108 3003 12 C Nonestab
2) Manufacturing and Supply of Launcher Mounting Frame to Drawing No DW 1108 0210 12[71]() Specification : Manufacturing and Supply of Launcher Mounting Frame to Drawing No DW 1108 0210 12 C Nonestab
3) Mfg and Supply of Launcher Mounting Frame to Drg No DW 1109 3100 11[71]() Specification : Mfg and Supply of Launcher Mounting Frame to Drg No DW 1109 3100 11 C Nonestab
Category : P
Grade : III
Size :
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) Manufacturing and Supply of Housing Support to Drg No DW 1108 3003 12[71]() Specification : Manufacturing and Supply of Housing Support to Drg No DW 1108 3003 12 C Nonestab
2) Manufacturing and Supply of Launcher Mounting Frame to Drawing No DW 1108 0210 12[71]() Specification : Manufacturing and Supply of Launcher Mounting Frame to Drawing No DW 1108 0210 12 C Nonestab
3) Mfg and Supply of Launcher Mounting Frame to Drg No DW 1109 3100 11[71]() Specification : Mfg and Supply of Launcher Mounting Frame to Drg No DW 1109 3100 11 C Nonestab
4) Manufacturing and Supply of Set of Heavy Machining Items as per Annexure MH1 for Kavach MOD II[71]() Specification : Manufacturing and Supply of Set of Heavy Machining Items as per Annexure MH1 for Kavach MOD II C Nonestab
Category : P
Grade : III
Size :
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) Manufacturing and Supply of Housing Support to Drg No DW 1108 3003 12[71]() Specification : Manufacturing and Supply of Housing Support to Drg No DW 1108 3003 12 C Nonestab
2) Manufacturing and Supply of Launcher Mounting Frame to Drawing No DW 1108 0210 12[71]() Specification : Manufacturing and Supply of Launcher Mounting Frame to Drawing No DW 1108 0210 12 C Nonestab
3) Mfg and Supply of Launcher Mounting Frame to Drg No DW 1109 3100 11[71]() Specification : Mfg and Supply of Launcher Mounting Frame to Drg No DW 1109 3100 11 C Nonestab
Category : P
Grade : III
Size :
1113 ADEE INDUSTRIES
65, LICHU BAGAN, KHARDAH, KOLKATA, WEST BENGAL
PIN1 : 700116
Phone No. : 03325530818
GSTIN : 19AAJFA5141P1Z1 		AAJFA5141P

Download 		1) Ordnance Factory Bolangir
Name Specification Use Status
1) WASHER ALUMINIUM,OD:7.62MM +/-0.05 ID:5.08+/-0.13MM,THICKNESS;0.64MM TO 0.51MM () DRG.NO.FD-650, PART NO.QX-176,DC NO.35781-A,DT.02.07.2014 C Not Estab.
2) TOP PLUG () OFAJ DRG.NO:S-78C (REF.DRG.NO.4079922, DC NO.36817-A, DT.08.03.2002, DULY SURFACE TREATED AS PER DRG.NO.5191819,DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM, M-107 & M77B ) C Not Estab.
Category : P
Grade : III
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) FUNNEL & FUNNEL ASSEMBLY Description : FUNNEL & FUNNEL ASSEMBLY() Specification : AL. POURING FUNNEL FOR SHELL 105 MM AMMN. TO DRG. NO. BL/EQP/U-5/350, DT. 11.10.2006. C Estab
Category : p
Grade : 3
Size : S
1114 MATHARU ENGINEERS
PLOT NO. F 179, PHASE 8B, INDUSTRIAL FOCAL POINT MOHALI PUNJAB
PIN1 : 160071
Phone No. : 9501315179
GSTIN : 03AAQPR6591P1ZP 		AAQPR6591P

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CONTAINER FOR ROCKET LINK ASSEMBLY AS PER DRG. NO. 8603-01-01-01 10-000-00XA() AS PER REQUIREMENT C
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]() Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM. C Nonestab
2) BLANK FOR SAFETY CAP TO OFAJ DRG NO FS 2955 FOR FUZE 162 MK 8 AND MK 9[00]() Specification : BLANK FOR SAFETY CAP TO OFAJ DRG. NO. FS-2955 FOR FUZE162 MK-8 & 9. R Nonestab
3) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]() Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E C Nonestab
4) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92[00]() Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92 C Nonestab
5) BODY TO DRG NO IQX 815 FOR FUZE 213 MK 5 M4[00]() Specification : BODY TO DRG.NO.IQX-815 FOR FUZE 213 MK-5 (M-4) C Nonestab
6) CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NO FS 2956 C[00]() Specification : CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NOFS2956C(ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION). C Nonestab
7) CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO FS 2956C ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE SO FIRMS TO INDICATE THE SAME IN THE QUOTATION[00]() Specification : CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION) C Nonestab
8) CONTAINER CARTRIDGES FULLY FINISHED TO DRG NO ITV 30 DC 37344 A[00]() Specification : CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A C Nonestab
9) CONVERSION OF AL ALLOY TUBE OD 88 X ID 60 ITEM CODE 170095PR46 TO BLANKS FOR ILLU SHELL BODY TO DRG NO FS 2915A[00]() Specification : CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A R Nonestab
10) CONVERSION OF AL ALLOY ROD 65 MM DIA ITEM CODE 170092PR46 TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG NO CC 532 C[00]() Specification : CONVERSION OF AL.ALLOY ROD 65 MM DIA (ITEM CODE:170092PR46) TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG.NO.CC-532 C. R Nonestab
11) CONVERSION OF AL ALLOY TUBE 60 plus point5 MM ID SND 13 plus 1 mm TH TO BLANKS FOR ILLU SHELL BODY TO DRG NO FS 2915[00]() Specification : CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915. C Nonestab
12) CONVERSION OF AL ALLOY TUBE OD 88 X ID 68 ITEM CODE 170094PR46 TO BLANKS FOR STABILIZING TUBE TO DRG NO FS 2914 A NO[00]() Specification : CONVERSION OF AL.ALLOY TUBE OD 88 X ID 68 (ITEM CODE : 170094PR46) TO BLANKS FOR STABILIZING TUBE TO DRG. NO.FS-2914 A NO. R Nonestab
13) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917[00]() Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917. R Nonestab
14) CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG NO CG 82 D INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG NO FS 2919 BY TURNING MILLING AND DRILLING OPERATION[00]() Specification : CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION ) R Nonestab
15) COVER OF OBTURATOR TO OFAJ DRG NO FS 2456 A[00]() Specification : COVER OF OBTURATOR TO OFAJ DRG.NO.FS-2456 A C Nonestab
16) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]() Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM. C Nonestab
17) DOME TO DRG NO IQX 816 FOR FUZE 213 MK 5 M4[00]() Specification : DOME TO DRG.NO.IQX-816 FOR FUZE 213 MK-5 (M4) C Nonestab
18) NOZZEL TO ARDE DRG NO 1135 DET 10[00]() Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14 C Nonestab
19) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301047062E DC36160 A DT 31 08 96[00]() Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96 C Nonestab
Category : DDP
Grade : I
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]() Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF BODY FROM RAW MATERIAL DRAWING NO. NAI(J)/501/1. (R/M: 133002022)[91]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) TRIGGER TO DRG. NO. IQX-316 IN F/C FOR FMC M-605 DC NO. 36997-A DT. 25.01.2005[63]() Specification : AS PER DRAWING C Nonestab
2) HEAD SAFETY FOR FMC M-605 EMPTY TO DRG NO. IQX-311 IN F/C DC. NO.35828-A dt. 18.10.94[63]() Specification : AS PER DRAWING C Nonestab
3) HEAD FLASH IGNITER TO DRG. NO. IQX-306 IN F/C FOR FMC DC. NO. 35573-A DT. 02.09.93[63]() Specification : AS PER DRAWING C Nonestab
4) PLUG TO DRG. NO. IQX-313 FOR FUZE MINE COMBINATION (F/C)[63]() Specification : AS PER SPECIFICATIONS C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION[60]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION[60]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BODY TO DRG NO TF-007 IN FINISHED CONDITION[63]() Specification : AS PER DRAWING C Nonestab
2) Magazine to DRG. NO. IQX-1012 IN FINISHED CONDITION[63]() Specification : Part No QX 1539 for Fuze 117 Mk-20 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) THREADED BUSH TO DRG. NO. NAI(J)/501/21 IN FINISHED CONDITION[63]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION[60]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) DISC TO DRG. NO. QX-351 IN FINISHED CONDITION[63]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010[63]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) LOCATOR to drg. no. (TF-013) IN FINISHED CONDITION[63]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]() Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 (WITHOUT SURFACE TREATMENT)[62]() Specification : HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 (WITHOUT SURFACE TREATMENT) R Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]() Specification : AS PER DRAWING C Nonestab
2) GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED)[62]() Specification : GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF BODY FROM RAW MATERIAL DRAWING NO. NAI(J)/501/1. (R/M: 133002022)[91]() Specification : AS PER DRAWING C Nonestab
2) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]() Specification : DRG. NO. SK-8345/C R Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BODY TO DRG NO TF-007 IN FINISHED CONDITION[63]() Specification : AS PER DRAWING C Nonestab
2) Magazine to DRG. NO. IQX-1012 IN FINISHED CONDITION[63]() Specification : Part No QX 1539 for Fuze 117 Mk-20 C Nonestab
3) Plug Representing Fuze in FC TO DRG NO M 10394[60]() Specification : As per drg. no. M-10394 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE Description : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE() Specification : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY UPPER FLASH 2A TO DRG NO ARDE 2285 DET NO 1 PART NO ITV 276 DC 36057A DT 28 121995 AND BODY LOWER FLASH 2A TO DRG NO ARDE DET NO 2 PART NO ITV277 DC 36550A DT 13041999[62]() Specification : DC-36057A DT 28.12.1995 DC -36550A DT 13.04.1999 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]() Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)- C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
2) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) TOP PLUG TO OFAJ DRG.NO:S-78C[62]() Specification : TOP PLUG TO OFAJ DRG. NO:S-78C (REF. DRG. NO. 4079922, DC NO.36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG. NO. 5191819, DC NO. 34810-A, DT. 05.03.90 (PRF FOR 155MM M-107 & M77B ) R Nonestab
Category : p
Grade : Grade I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]() Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]() Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]() Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LOCK[06]() Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Right hand carrier - 172.62.136[06]() Specification : GOST:4543-71 C Nonestab
2) Left hand carrier - 175.62.137[06]() Specification : GOST 4543-71 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Small Arms Factory
Name Specification Use Status
1) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90 Description : BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90() Specification : BOLT,ECCENTRIC ASSY CAT PART NO.14/5306-003416 TO CQA(EE) DRG.CAT.NO.1189K DT.9/4/90 . C Estab
2) ECENTRIC BOLT TO CQA EE DRG NO CAT NO 1403 C DC NO ES 14 224 DT 3 10 84 Description : ECENTRIC BOLT TO CQA EE DRG NO CAT NO 1403 C DC NO ES 14 224 DT 3 10 84() Specification : ECENTRIC BOLT TO CQA(EE)DRG.NO.CAT NO.1403/C .DC.NO.ES/14/224 DT.3.10.84. C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Conversion of steel bars into extractor lower as per drg no 2A260281[63]() Specification : As per drg no 2A26-02-81 C Nonestab
2) Conversion of steel bars into extractor upper to drg no 2A260280[63]() Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
1115 VLS INDUSTIRES
135,Ground Floor, Ramdaspeth, Nagpur Jain Manidir Nagpur Maharashtra
PIN1 : 440010
Phone No. : 2442122
GSTIN : 27AMZPM1836H1ZH 		AMZPM1836H

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Wax Special No 6 Grade I[10]() Specification : White Colour To Specn.No.CS-5301-B R Nonestab
Category :
Grade : Grade III
Size : S
1116 WESTERN INDIA FORGINGS PVT LTD
GAT NO 163,HISSA NO 1 NAGAR RDSANASWADI,TAL SHIRUR PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 679819
GSTIN : 27AAACW2628M1Z1 		PNEWO1208E

Download 		1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) ADAPTER FORGING FOR BOAT TAIL.REV.8() AS PER HAPP DRG NO OADF 155 2010 REV.8 C NOT ESTAB
Category : P
Grade : I
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) RING RACE LOWER TO LF 3901212010[39]() Specification : TY14-102-182-98 C Nonestab
2) RING RACE UPPER TO LF3901212011[39]() Specification : TY14-102-182-98 C Nonestab
Category :
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) RING RACE LOWER TO LF 3901212010[39]() Specification : TY14-102-182-98 C Nonestab
2) RING RACE UPPER TO LF3901212011[39]() Specification : TY14-102-182-98 C Nonestab
3) RH REAR FLANGE[]() Specification : R Nonestab
Category :
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) ROAD WHEEL ARM 1 2 6 SUSPENSIONS TO LF 3906411027 TO DRG NO 172 51 021 F[39]() Specification : GOST 4543-71 C Nonestab
Category :
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) RING TO DRG NO 172 40 146 F TO LF 3906401050[39]() Specification : GOST 4543 71 C Nonestab
Category :
Grade : Grade III
Size : L
1117 Super House Limited
150 Feet Road, Jajmau, Kanpur, Uttar Pradesh
PIN1 : 208010
Phone No. : 9935142044
GSTIN : 09AABCS9328K1ZV 		KNPS01554A

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS() AS PER REQUIREMENT & SPECIFICATION R
2) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : II
Size : L
1118 TORRENT INDUSTRIES
BANK ROAD, MOHEBAWALA INDUSTRIAL AREA DEHRADUN UTTARAKHAND
PIN1 : 248002
Phone No. : 9997038677
GSTIN : 05AHKPG6699J1ZR 		AHKPG6699J

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) Plug() As per OLF Drawing no. AF 6672095 C Estab.
2) Receptacle Assy.() As per OLF Drawing no. BL 5282061 C Estab.
3) Board Assy. () As per OLF Drawing no. BL 6672493 C Estab.
4) Bush () As per OLF Drawing no. OLF/R&D/TVNE-4B/312 C Estab.
5) Phelnolic Plastbush with insert () As per OLF Drawing no. OLF/MISC/833 C Estab.
6) Gasket () As per OLF Drawing no. AL 7840945 C Estab.
7) Holder Plastic Mould() As per OLF Drawing no. BL 6615096 C Estab.
8) Eccentric () As per OLF Drawing no. BL 6365085 C Estab.
9) Bush () As per OLF Drawing no. AF 8220894 C Estab.
Category : P
Grade : II
Size : S
1119 MASSPOWER ENTERPRISES
SURVEY.No. 8/1/2, SNEH APARTMENTS, FLAT NO 14 ,NEAR TAPOVAN SOCIETY ,WARJE, PUNE 411 058. NDA ROAD PINE Maharashtra
PIN1 : 411058
Phone No. : 9096612624 		ACQPL4261Q

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Cocking Handle for JVPC Description : Cocking Handle for JVPC() Specification : Cocking Handle for JVPC DRG No. 0204 03 04 01 12 001 12DA & 0204 03 04 01 12 001 22DA C Estab
Category : ddp
Grade : 3
Size : S
1120 AJAY TRADING COMPANY
84/60, G.T. ROAD, ANWARGANJ KANPUR ANWARGANJ KANPUR Uttar Pradesh
PIN1 : 208003
Phone No. : 2388654
GSTIN : 09AACFA4133A1Z6 		KNPAO1372A

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRICATION OF PARA 51 MM[2110025067]() Specification : SPECN. No. ADRDE/553(d) R Nonestab
Category :
Grade : Grade III
Size : SS