2) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]()
Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
C
Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Estab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
3) SUPPLY OF TRIGGER TO DS CAT NO 1005 001690 ICR 1238 DC NO 27044 SA DT 23 03 2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : SUPPLY OF TRIGGER TO DS CAT NO 1005-001690 (ICR 1238) DC NO 27044-SA DT. 23.03.2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED
R
Nonestab
4) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
5) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Estab
6) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()
Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025
C
Nonestab
7) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
2) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Nonestab
3) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT FRAME TO DRG. NO. 30P 1104[70]()
Specification : AS PER DRG OF FRONT FRAME TO DRG. NO. 30P 1104
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Estab
2) NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Estab
3) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Estab
4) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Estab
5) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Estab
6) PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Estab
7) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle
C
Estab
8) PLUG PIN FIRING 32P 1002[70]()
Specification : AS PER DRG PLUG PIN FIRING 32P 1002
C
Estab
9) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Estab
2) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Estab
3) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Estab
4) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Estab
5) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Estab
6) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Estab
7) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
8) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Estab
9) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
4) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
5) BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle
C
Nonestab
6) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
7) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL
E
Nonestab
8) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Nonestab
9) HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle
C
Nonestab
10) SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
11) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
12) DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
C
Estab
13) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
14) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
15) PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
16) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle
C
Nonestab
17) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4008
C
Nonestab
18) DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.[42]()
Specification : AS PER DRAWING NO 32P 5003. REQD FOR UBGL
E
Nonestab
19) DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL[42]()
Specification : AS PER DRG NO 32P 5002. REQD FOR UBGL
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) CATCH MAGAZINE TO DRGNO 29P 0045STAR required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle
C
Nonestab
3) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
4) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
5) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
6) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Nonestab
7) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
6) SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
7) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.[70]()
Specification : AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
2) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
3) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR
C
Nonestab
4) COMPENSATOR 2016[70]()
Specification : COMPENSATOR TO PART NO. 2A42.02.016 WITH FIRM'S MATERIAL REQD FOR 30MM CANNON (C2016)DC NO. 18845-W DT. 13.01.2004 FOR DC LATEST ISSUE TO BE FOLLOWED
E
Nonestab
5) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL
C
Nonestab
6) Pawl belt holding to DSCAT NO 3040 003452 A5013 DC NO 27194 SA[70]()
Specification : Pawl belt holding to DSCAT NO 3040 003452 A5013 DC NO 27194 SA LF NO 7013998053
C
Nonestab
7) Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA[70]()
Specification : Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA for DC Latest to be followed Component to be manufactured through forging route required for 12.7mm AD Gun LF NO7013998055
C
Nonestab
8) Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO 27086 SA[70]()
Specification : Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO.27086 SA for DC Latest to be followed with firms material required for 12.7mm AD Gun LF No. 7013998061
C
Nonestab
9) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
10) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
11) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
12) SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
13) SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
2) Manufature and supply of CATCH COCKING HANDLE TO DS CAT NO 1005 001547 ICR 1287 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR RIFLE 7 62MM 1A1[70]()
Specification : AS PER THE SPECIFICATION GIVEN
E
Nonestab
3) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
4) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
5) MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR[70]()
Specification : MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR
C
Nonestab
6) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
7) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
8) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
9) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
10) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]()
Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material
R
Nonestab
2) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109[70]()
Specification : SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
4) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
5) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF EJECTOR BLANK DRG TEND 2795[70]()
Specification : SUPPLY OF EJECTOR BLANK TO DRAWING NO. TEND 2795 WITH FIRM'S MATERIAL WITHOUT HEAT TREATMENT AND PHOSPATING
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) RETAINING PIN FEED STUD FOR MAG
Description : RETAINING PIN FEED STUD FOR MAG()
Specification : RETAINING PIN, FEED STUD TO DS CAT NO. 5315-001526 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Estab
2) WASHER FRONT GUIDE RIGHT FOR MAG
Description : WASHER FRONT GUIDE RIGHT FOR MAG()
Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HOUSING TRIGGER OF LMG BELT FED[70]()
Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED,DRG NO.SK-5817.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Sleeve Button Catch Magazine for JVPC
Description : Sleeve Button Catch Magazine for JVPC()
Specification : SLEEVE BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-005-00DA
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Stem Roller for MAG
Description : Stem Roller for MAG()
Specification : STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17AS PER DRG
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Block Gas in finish condition for MAG[70]()
Specification : Block Gas in finish condition as per D. S. CAT No. 1005-006815 for MAG 7.62mm (Bore Size Dia 23.021 to 23.037mm)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
2) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC[70]()
Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB
C
Nonestab
2) PIN LOCKING HAND GUARD FOR JVPC[70]()
Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Blank of Receiver Plate[01]()
Specification : Steel Blank of Receiver Plate Left & Right to Drg. SKM-960*
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Housing Fore Sight for 9X19 mm Machine Pistol[70]()
Specification : Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SPRING AS PER DRAWING NO SK 6517 TE[70]()
Specification : SPRING AS PER DRAWING NO SK 6517 TE
C
Nonestab
2) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
3) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
4) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
2) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
3) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
4) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy for JVPC[70]()
Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy for JVPC[70]()
Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)
P
Nonestab
2) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]()
Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA
C
Nonestab
3) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : Body Housing Lower & Trigger Mechanism Assy. for JVPC 5.56 MM DRG No. 0204-03-03-02-15-000-00DB
C
Nonestab
4) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
5) BOX MAGAZINE[70]()
Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08
C
Nonestab
6) BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD
C
Nonestab
7) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION[70]()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 S
C
Nonestab
8) CLOSING CUP for JVPC[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
9) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12[70]()
Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
C
Nonestab
10) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING[70]()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56M
C
Nonestab
11) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
12) Loop Sling Front for JVPC[70]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
13) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
14) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]()
Specification : AS PER DRG.
C
Nonestab
15) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.[70]()
Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
C
Nonestab
16) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Nonestab
17) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.[70]()
Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
C
Nonestab
18) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
C
Nonestab
19) Magazine Assembly for JVPC[70]()
Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE)COATED AS PER DRG NO.0204-03-03-00-07-000- 00DD
C
Nonestab
20) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
21) Plate Armature in finished condition Drg no. CQA(I)-393/9 to DS CAT NO. 6115-001167()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy for JVPC[7012470416]()
Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)
C
Nonestab
2) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]()
Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA
C
Nonestab
3) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : Body Housing Lower & Trigger Mechanism Assy. for JVPC 5.56 MM DRG No. 0204-03-03-02-15-000-00DB
C
Nonestab
4) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
5) BOX MAGAZINE[70]()
Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08
C
Nonestab
6) BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD
C
Nonestab
7) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION[70]()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Nonestab
8) CLOSING CUP for JVPC[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
9) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12[70]()
Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
C
Nonestab
10) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING[70]()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Nonestab
11) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
12) Loop Sling Front for JVPC[7012470224]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
13) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
14) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]()
Specification : AS PER DRG.
C
Nonestab
15) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.[70]()
Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
C
Nonestab
16) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Nonestab
17) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.[70]()
Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
C
Nonestab
18) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
C
Nonestab
19) Magazine Assembly for JVPC[70]()
Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE)COATED AS PER DRG NO.0204-03-03-00-07-000- 00DD
C
Nonestab
20) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
21) DS CAT NO. 6115-001170[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
22) Bayonet for JVPC[70]()
Specification : Bayonet for JVPC 5.56 X 30MM Drg.No. 0204 04 02 00 00 000 00DA (I/Code-7012470194)
C
Nonestab
23) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
24) BLANK OF BLOCK GAS For JVPC[70]()
Specification : BLANK OF BLOCK GAS For JVPC
C
Nonestab
25) BLANK OF COCKING HANDLE for JVPC[70]()
Specification : BLANK OF COCKING HANDLE for JVPC
C
Nonestab
26) Hammer for JVPC[7012470236]()
Specification : HAMMER FOR JVPC 5.56MM
C
Nonestab
27) HANDLE ASSEMBLY Drg. No SK 4407*[72]()
Specification : HANDLE ASSEMBLY TO DRG.NO-SK 4407*
C
Nonestab
28) HOOK TO DS CAT NO 5340 015108[70]()
Specification : HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
C
Nonestab
29) Housing Plunger to DS CAT NO 1005 007900[70]()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
C
Nonestab
30) HOUSING SIGHT REAR FOR JVPC[70]()
Specification : HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 15 28 003 00DD
32) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER[70]()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
C
Estab
33) LEVER LOCK GAS CYLINDER WELDING FOR JVPC[7012470157]()
Specification : LEVER LOCKING GAS CYLINDER WELDING FOR JVPC 5.56 X30MM DRG NO. 0204-03-03-01-13-000-00DB CONSISTING OF LEVER LOCKING GAS CYLINDER, PIN LEVER LOCKING GAS CYLINDER
C
Nonestab
34) LEVER LOCKING FOR CARBINE 9 MM[70]()
Specification : LEVER LOCKING(CISA-633)DS CAT NO-1005-006886 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26900-SA DATED-20-07-2016.
C
Nonestab
35) LEVER PIN LOCKING IN FINISHED CONDITION[70]()
Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293.
C
Nonestab
36) Link for JVPC[7012470234]()
Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF
C
Nonestab
37) Magazine Assy with NI PTFE Coated for JVPC[70]()
Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD
C
Nonestab
38) MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC[70]()
Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC
C
Nonestab
39) ROD COCKING FOR JVPC[70]()
Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462)
Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
C
Nonestab
2) 6570016000 BOX H 50 STEEL[65]()
Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987
C
Nonestab
3) 6570850706 BOX B7A "OLIEVE GREEN"[65]()
Specification : SPECN. NO. IA 1169
C
Estab
4) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
11) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM[65]()
Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS
1.BODY DET. NO. 010
2. COVER DET.NO. 020
3.BOLT DET. NO. 030
4. FORK DET.NO 005
C
Nonestab
12) 6570610080 BOX P60 MK 2 L[65]()
Specification : AMN. CONT. BOX P 60 MARK 2/L TO DRG. PART NO. SV 24 A DC NO. 35530- A.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BODY HOUSING BLANK
Description : BODY HOUSING BLANK()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Estab
2) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
Description : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010()
Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
C
Estab
3) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION
Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Estab
4) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Estab
5) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM
Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM()
Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
C
Estab
6) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING
Description : COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Estab
7) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER
Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
10) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
Description : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION()
Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
C
Estab
11) Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
Description : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition()
Specification : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Accessories in Container Assembly SK 6601 TE[70]()
Specification : Accessories in Container Assembly SK 6601 TE
C
Nonestab
2) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
3) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
4) Pin SK 6508 TE[70]()
Specification : Pin SK- 6508 /TE
C
Nonestab
5) COVER RETAINER ASSEMBLY DRG No SK 6667 TE[70]()
Specification : COVER RETAINER ASSEMBLY DRG No SK- 6667/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER WITH REINFORCING PLATE SK6549 TE[70]()
Specification : COVER WITH REINFORCING PLATE SK-6549/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BLANK FOR TRAY AS PER DRG.NO.SKM-864
Description : BLANK FOR TRAY AS PER DRG.NO.SKM-864()
Specification : BLANK FOR TRAY AS PER DRG.NO.SKM-864
C
Estab
2) BODY HOUSING BLANK
Description : BODY HOUSING BLANK()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Estab
3) BAND RETAINER TO DS CAT NO 5340 015713
Description : BAND RETAINER TO DS CAT NO 5340 015713()
Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION.
C
Estab
4) SIGHT SMALL ARMS
Description : SIGHT SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
5) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
Description : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010()
Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
C
Estab
6) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024
Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024()
Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024
C
Estab
7) UNIT AUTO ASSEMBLY TO DRG. NO. SK-2825/62
Description : UNIT AUTO ASSEMBLY TO DRG. NO. SK-2825/62()
Specification : AS PER DRG.
C
Estab
8) COVER AND PLATE BRAZING
Description : COVER AND PLATE BRAZING()
Specification : COVER & PLATE BRAZING TO DS CAT 1005-008010DC(I)26541-SA DT.11.11.2010 CONSISTING OF FOLLOWING 1) COVER TO DS CAT 1005-008008 DC(I) 26744-SA,DT. 03.03.152)PLATE REAR COVER TODS CAT NO. 1005-008009 DC(I)NO.26516-SA DT 26.06.2010,
C
Estab
9) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12()
Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
C
Estab
10) Channel Left Drg. No. AKC-03
Description : Channel Left Drg. No. AKC-03()
Specification : AS PER DRG.
C
Estab
11) Channel Right Drg No. AKC-03/7BL
Description : Channel Right Drg No. AKC-03/7BL()
Specification : AS PER DRG.
C
Estab
12) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56
Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56()
13) PIN LOCKING PIN FIRING FOR SMALL ARMS
Description : PIN LOCKING PIN FIRING FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
14) CATCH MAGAZINE FOR INSAS 5.56 MM
Description : CATCH MAGAZINE FOR INSAS 5.56 MM()
Specification : AS PER DRAWING
C
Estab
15) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition
Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition()
Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK)
TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789
C
Estab
16) Pin butt DS CAT No 5315 009110 in finished condition
Description : Pin butt DS CAT No 5315 009110 in finished condition()
Specification : PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16
C
Estab
17) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION
Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Estab
18) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm
Description : Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm()
Specification : AS PER DRG.no. 1005-000977
C
Estab
19) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Estab
20) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM
Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM()
Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
C
Estab
21) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING
Description : COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Estab
22) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER
Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
C
Estab
23) ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION.
Description : ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION.()
Specification : ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION.
C
Estab
24) RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.
Description : RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.()
Specification : RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.
28) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
Description : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION()
Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
C
Estab
29) Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
Description : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition()
Specification : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
C
Estab
30) CLIP for MAG
Description : CLIP for MAG()
Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Estab
31) Plate Closing Butt End drg .no. SK-2825/57 SHT 2 for LMG 5.56mm
Description : Plate Closing Butt End drg .no. SK-2825/57 SHT 2 for LMG 5.56mm()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BLANK FOR TRAY AS PER DRG.NO.SKM-864
Description : BLANK FOR TRAY AS PER DRG.NO.SKM-864()
Specification : BLANK FOR TRAY AS PER DRG.NO.SKM-864
C
Estab
2) BODY HOUSING BLANK
Description : BODY HOUSING BLANK()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Estab
3) BAND RETAINER TO DS CAT NO 5340 015713
Description : BAND RETAINER TO DS CAT NO 5340 015713()
Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION.
C
Estab
4) SIGHT SMALL ARMS
Description : SIGHT SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
5) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
Description : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010()
Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
C
Estab
6) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024
Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024()
Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024
C
Estab
7) UNIT AUTO ASSEMBLY TO DRG. NO. SK-2825/62
Description : UNIT AUTO ASSEMBLY TO DRG. NO. SK-2825/62()
Specification : AS PER DRG.
C
Estab
8) COVER AND PLATE BRAZING
Description : COVER AND PLATE BRAZING()
Specification : COVER & PLATE BRAZING TO DS CAT 1005-008010DC(I)26541-SA DT.11.11.2010 CONSISTING OF FOLLOWING 1) COVER TO DS CAT 1005-008008 DC(I) 26744-SA,DT. 03.03.152)PLATE REAR COVER TODS CAT NO. 1005-008009 DC(I)NO.26516-SA DT 26.06.2010,
C
Estab
9) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12()
Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
C
Estab
10) Channel Left Drg. No. AKC-03
Description : Channel Left Drg. No. AKC-03()
Specification : AS PER DRG.
C
Estab
11) Channel Right Drg No. AKC-03/7BL
Description : Channel Right Drg No. AKC-03/7BL()
Specification : AS PER DRG.
C
Estab
12) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56
Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56()
13) PIN LOCKING PIN FIRING FOR SMALL ARMS
Description : PIN LOCKING PIN FIRING FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
14) CATCH MAGAZINE FOR INSAS 5.56 MM
Description : CATCH MAGAZINE FOR INSAS 5.56 MM()
Specification : AS PER DRAWING
C
Estab
15) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition
Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition()
Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK)
TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789
C
Estab
16) Pin butt DS CAT No 5315 009110 in finished condition
Description : Pin butt DS CAT No 5315 009110 in finished condition()
Specification : PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16
C
Estab
17) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION
Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Estab
18) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm
Description : Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm()
Specification : AS PER DRG.no. 1005-000977
C
Estab
19) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Estab
20) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM
Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM()
Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
C
Estab
21) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING
Description : COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Estab
22) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER
Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
C
Estab
23) ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION.
Description : ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION.()
Specification : ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION.
C
Estab
24) RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.
Description : RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.()
Specification : RIVET, KNOB BARREL LOCKING CATCH TO DS CAT NO. 5320-000955 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.
28) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
Description : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION()
Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
C
Estab
29) Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
Description : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition()
Specification : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
C
Estab
30) CLIP for MAG
Description : CLIP for MAG()
Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Estab
31) Plate Closing Butt End drg .no. SK-2825/57 SHT 2 for LMG 5.56mm
Description : Plate Closing Butt End drg .no. SK-2825/57 SHT 2 for LMG 5.56mm()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BUCKLE ASSEMBLY FOR SMALL ARMS
Description : BUCKLE ASSEMBLY FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
2) M S Hinge
Description : M S Hinge()
Specification : M.S. Hinge DRG No. SK-5213
C
Estab
3) HANDLE ASSEMBLY Drg. No SK 4407*
Description : HANDLE ASSEMBLY Drg. No SK 4407*()
Specification : HANDLE ASSEMBLY TO DRG.NO-SK 4407*
1) Printed Size Label 60x45 mm for Bag Kit Universal[21]()
Specification : TS LT. No. TS/002/BAG KIT UNIVERSAL DATE 09.12.16 PRINTED SIZE LABEL 60X45 MM FOR BAG KIT UNIVERSAL (MARK-2) BILINGUAL HINDI & ENGLISH SPCNS-BEST TRADE QUALITY, AS PER SPECIFICATION AS PER SPECIFICATION
1) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Nonestab
2) S A OF FUEL TANK RH 160 LITRE PART No B5028201 V2[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
3) S A OF FUEL TANK LH 160 LITRE PART No B5028202 V2[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
Category :
Grade : Grade III
Size :
S
6
Puja Fluid Seals Pvt Ltd
Seal House ,Plot No. SEI 6/1, Near W-12, MIDC., Bhosari, Pune MIDC Bhosari Pune Maharashtra
PIN1 : 411026
Phone No. : 2027112017
GSTIN : 27AACCP51196K1Z
1) SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002
Description : SEALING RING TO CQA AMMN DRG NO 3 016919 DET 35 DC I 36861 A DT 30 10 2002()
Specification : SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002
C
Estab
Category : ddp
Grade : 3
Size :
S
7
JigTech Enterprises
Plot no. 180 T-Block, Near MIDC Post office Bhosari Pune 411026 Plot no. 180 T-Block Near MIDC Post office Bhosari Pune 411026 Pune Maharashtra
PIN1 : 411026
Phone No. : 27121142
GSTIN : 27AVTPS0293D1Z6
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
Description : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Estab
2) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA
Description : Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788.
C
Nonestab
9) TA GUIDE TO DRG NO OFM 32845 6120100129[61]()
Specification : AS PER OFM
C
Nonestab
10) MACHINING OF TRACK GUIDE[61]()
Specification : AS PER OFM APECIFICATION
C
Nonestab
11) MACHINING OF TRACK LINK[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
12) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
13) FORGING & MACHINING OF TA GUIDE (6120100129)[61]()
Specification : TA GUIDE TO DRG.NO.OFM-32845.COMPONENT SHALL BE MADE FROM
CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS
/TECH/03 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.
32845 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE
C
Nonestab
14) FORGING & MACHINING OF TA CLAMP(6120100130)[61]()
Specification : TA CLAMP TO DRG.NO.OFM-32843.COMPONENT SHALL BE MADE FROM
[CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS
/TECH/02 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO-32843]
C
Nonestab
15) FORGING AND MACHINING OF TA LINK (6120100128)[61]()
Specification : TA LINK TO DRAWING NO.OFM-32844.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/
TDS/TECH/04 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG NO32844.
C
Nonestab
16) FORGING AND MACHINING OF TA SHOE (6120100131)[61]()
Specification : TA SHOE TO DRG.NO.OFM-32846.COMPONENT SHALL BE MADE FROM
CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/
TDS/TECH/01 FOLLOWED BY MECHINING OF COMPONENT AS PER DRG.NO
32846 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE
C
Nonestab
17) TA GUIDE FORGING (6120100103)[61]()
Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03.
C
Nonestab
Category : P
Grade : II
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FORGING FOR BR.BASE TO DS.CAT.NO.1010-00 1323 SHT.6, DESIGN.NO.ARDE-1917 SHT.3. DC(I) NO.18983-W,Dt.10-07-06()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : I
Size :
L
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST DISK FORGING TO 3901040059[39]()
Specification : 172.40.326/F
R
Nonestab
2) BUSHING FORGING TO 3906113240[39]()
Specification : 175.24.085/F
C
Nonestab
3) SLIDE TO 3906201160[39]()
Specification : 175.15.018-2/F
R
Nonestab
4) RING TO 3906203163[39]()
Specification : 175.18.043/F
C
Nonestab
5) DISC THRUST TO 3906401067[39]()
Specification : 172.40.228/F
R
Nonestab
6) BOOSTER TO 3906401120[39]()
Specification : 175.40.023/F
C
Nonestab
7) BOOSTER TO 3906401126[39]()
Specification : 175.40.027-2/F
R
Nonestab
8) HOUSING BOOSTER RH AND LH TO 3906401146[39]()
Specification : 175.40.052/053/F
C
Nonestab
9) PLANET PINION TO 3906404013[39]()
Specification : 172.43.006/F
C
Nonestab
10) BUSHING TO 3906411099[39]()
Specification : 172.51.026/F
C
Nonestab
11) SUPPORT OF LH REDUCTION GEAR UNIT TO 3906801445[39]()
Specification : 175.01.378-B/F
R
Nonestab
12) LEVER TO 3906861041[39]()
Specification : 172.52.124/F
C
Nonestab
13) COVER TO 3906861044[39]()
Specification : 172.52.127/F
R
Nonestab
14) DRUM OUTER 3996202104[39]()
Specification : 432.17.009-1/F
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RH DRUM TO 3901040034[39]()
Specification : 172.40.300/F
R
Nonestab
2) BOOSTER FORGING TO 3901040054[39]()
Specification : 172.40.321/F
R
Nonestab
3) INNER BOOSTER FORGING TO 3901040055[39]()
Specification : 172.40.322/F
R
Nonestab
4) RH EXTREME ENGAGING RING FORGING TO 3901040061[39]()
Specification : 172.40.328/F
R
Nonestab
5) RH MIDDLE ENGAGING RING FORGING TO 3901040062[39]()
Specification : 3901040062
R
Nonestab
6) R H FRONT FLANGE TO 3901040104[39]()
Specification : 172.40.364/F
C
Nonestab
7) MOVABLE RACE RING TO 3906109014[39]()
Specification : 172.11.067/F
R
Nonestab
8) RING TO 3906109020[39]()
Specification : 172.11.073/F
R
Nonestab
9) GEAR RIM TO 3906109067[39]()
Specification : 172.11.129/F
R
Nonestab
10) RING TO 3906401050[39]()
Specification : 172.40.146/F
R
Nonestab
11) BOOSTER TO 3906401070[39]()
Specification : 172.40.231/F
R
Nonestab
12) BOOSTER TO 3906401071[39]()
Specification : 172.40.232/F
R
Nonestab
13) GEAR ANNULUS TO 3906401085[39]()
Specification : 172.40.247/F
R
Nonestab
14) DISC TO 3906401132[39]()
Specification : 175.40.031/F
R
Nonestab
Category : p
Grade : Grade III
Size :
L
9
ISHMEET FORGINGS PVT. LTD.
595/8, CAMPA COLA FACTORY LANE DHANDARI KALAN LUDHIANA PUNJAB
PIN1 : 141010
Phone No. : 01615089966, 9815460460
GSTIN : 03AAACI9819E1ZR
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
3) FILTERING & VENTILATION SYSTEM WITHOUT NBC FILTER()
678-71-CD1
C
Not Estab
4) GASOLENE CENTRIFUGAL PUMP()
As per drawing
C
Not Estab
5) REDUCING VALVE()
765-06-CD308
C
Not Estab
6) EYE ()
765-32-CD125
C
Not Estab
7) PISTON()
765-32-CD120
C
Not Estab
Category : P
Grade : III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HINGE TO 6201004080[62]()
Specification : 184.04.005-1
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Engine Factory Avadi
Name
Specification
Use
Status
1) CRANK CASE LOWER[38]()
Specification : AS PER DRAWING & VQC, QAP
C
Estab
2) GOVERNOR BODY CASTING[38]()
Specification : GOVERNOR BODY CASTING TO DRG NO. 315-619-8 (AS PER VQC, DRAWINGS & SPECFICATIONS)
C
Estab
3) ASSY EXHAUST MANIFOLD[62]()
Specification : ASSY EXHAUST MANIFOLD TO DRG NO. SB 418-00-6 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
4) FUEL PUMP HOUSING[62]()
Specification : FUEL PUMP HOUSING TO DRG NO. SB 3327-01-10 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
5) OIL PUMP ASSEMBLY[62]()
Specification : OIL PUMP ASSEMBLY TO DRG NO. SB 20-12-00-13 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
6) FUEL PUMP DRIVE HOUSING ASSY[62]()
Specification : FUEL PUMP DRIVE HOUSING ASSY TO DRG NO. SB 3308-04-24 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
7) REGULATOR BODY[62]()
Specification : REGULATOR BODY TO DRG NO. 315-619-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
8) GOVERNOR COVER[62]()
Specification : GOVERNOR COVER TO DRG NO. 315-620-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
9) OIL PUMP BODY UTD[38]()
Specification : OIL PUMP BODY TO DRG NO. 20-12-121-11 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
10) FUEL PUMP BODY V92S2[62]()
Specification : FUEL PUMP BODY to DRG.NO: 3327-20-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
11) GOVERNOR BODY UTD 20[62]()
Specification : GOVERNOR BODY to DRG.NO: SB 20-15-601-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
12) FUEL PUMP BODY UTD 20[62]()
Specification : FUEL PUMP BODY to DRG. NO: SB 20-27-01-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
2) BUSH FOR 81MM ATAL[62]()
Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BOSS TO LF NO 6206305002[62]()
Specification : As per VQC attached herewith.
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHACKLE[62]()
Specification : SHACKLE 176.64.016-2
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) REDUCTION GEAR CASE TO LF 3806402015[38]()
Specification : GOST 2685-75
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) 6206414010 NUT 175 54 008 1[62]()
Specification : NUT 175 54 008 1
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) 6201040098 BOLT 172 40 357[62]()
Specification : BOLT 172 40 357
E
Nonestab
2) 6206401216 BOLT 432 40 237[62]()
Specification : BOLT 432 40 237
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LOCK[06]()
Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1
C
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]()
Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1
E
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACE ASSY[06]()
Specification : BRACE ASSY / 54.28.772CBCB
E
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) POINTER ASSY / 188.95.003CBCB[06]()
Specification : POINTER ASSY / 188.95.003CBCB
E
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST DISC / 172.95.060[06]()
Specification : THRUST DISC / 172.95.060
E
Nonestab
Category : ddp
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST BUSHING / 175.95.114-1[06]()
Specification : THRUST BUSHING / 175.95.114-1
E
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CASTING CASE[02]()
Specification : GOST2685-75
R
Nonestab
Category : p
Grade : Grade II
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ELEMENTS OF MOULD BODY SELECTOR[02]()
Specification : ALUMINIUM ALLOYS GOST 2685-75
R
Nonestab
Category : p
Grade : Grade II
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HOUSING 172 27 126 1 C[02]()
Specification : ALUMINIUM CASTING
R
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ELEMENTS OF MOULD BODY SELECTOR[02]()
Specification : ALUMINIUM ALLOYS GOST 2685-75
R
Nonestab
2) RAKOVs LINK LOADING MACHINE ASSY 56 YUL 428A CBCB[62]()
1) BALLISTIC GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN LIGHT WEIGHT SOFT ARMOUR PANEL SAP OF BODY ARMOURS 160 CM WIDE
Description : BALLISTIC GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN LIGHT WEIGHT SOFT ARMOUR PANEL SAP OF BODY ARMOURS 160 CM WIDE()
1) BOX NO S-8 MK-1 (EMPTY ASSEMBLY) TO DRG NO. NASK 875 (PROV)[63]()
Specification : DRG NO. NASK 875 (PROV)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FRP BOX FOR RGB-12[65]()
Specification : DRG. NO. ODC/AFK-096-15
C
Nonestab
2) FRP BOX FOR RGB-60[65]()
Specification : DRG. NO. ODC/AFK-086-15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) SET OF PACKING PIECES FOR MINE APM[21]()
Specification : AS PER CQA(A) SPECN.
C
Nonestab
2) PACKING PIECE SET FOR BOX STEEL S 6 MK-1AS PER DRG.ARDE 2225, SHEET NO.2 DT. 22.07.15 ITEM 3,4 & 5[21]()
Specification : AS PER CQA(A) SPECN.
C
Nonestab
3) PACKING PIECE TOP & BOTTOM FOR PKG. OF FUZE YDB-60[21]()
Specification : DRG. NO. ODC/AFK - 044 - 14
C
Nonestab
4) SET OF PACKING PIECES PROFEEL FITMENT 40MM AMMN.[21]()
Specification : IND/ME/913
C
Nonestab
5) SET OF PKG. PIECES FOR LIMPET MINE[21]()
Specification : A) BOTTOM 460 X 355 X 25 MM TH 1 NO. B) END 300 X 135 X 30 MM TH 2 NOS C) SIDE 360 X 135 X 30 MM TH 2 NOS D) TOP 455 X 350 X 25 MM TH
C
Nonestab
6) PIECE PACKING SET TO DRG ARDE 1930[21]()
Specification : DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO
10) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]()
Specification : CQA(A) 2804
C
Nonestab
11) CONTAINER FOR BOOSTER CHARGE[60]()
Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) PLASTIC POWER PISTON W O POUCH 65MM
Description : PLASTIC POWER PISTON W O POUCH 65MM()
Specification : AFK DRG.NO. KF/SK-1809
C
Nonestab
2) PLASTIC POWER PISTON FOR 70 MM 12 BORE
Description : PLASTIC POWER PISTON FOR 70 MM 12 BORE()
Specification : DRG. NO KF/SK-1747 DATED 04/03/2000
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL[70]()
Specification : AS PER DRG OF " TRANSIT CASE TO DRG NO. TEND 1937* FOR 40mm MGL
"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN)[70]()
Specification : AS PER DRG TO CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb
D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005
FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
(A 9900)(PACKING BOX FOR 12.7mm AD GUN)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PACKING BOX AS PER DRG NO K 9024 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
E
Nonestab
2) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]()
Specification : As per Drawing
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
2) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]()
Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PACKING BOXCPP HOLLOW CORRUGATED BOX CAPACITY 10 RIFLES TO DRG No RFI SK 6430STAR3 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PACKING BOXCPP HOLLOW CORRUGATED BOX CAPACITY 5 RIFLES TO DRG No RFI SK 6431STAR3 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]()
Specification : As per Drawing
E
Nonestab
2) SUPPLY OF PACKING BOX AS PER DRG NO K 9024 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
E
Nonestab
3) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
4) PACKING BOXCPP HOLLOW CORRUGATED BOX CAPACITY 5 RIFLES TO DRG No RFI SK 6431STAR3 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle
E
Nonestab
5) PACKING BOXCPP HOLLOW CORRUGATED BOX CAPACITY 10 RIFLES TO DRG No RFI SK 6430STAR3 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle
E
Nonestab
6) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
7) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
8) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
9) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
10) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
11) SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL
E
Nonestab
12) AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL[70]()
Specification : AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL
C
Nonestab
13) TRANSIT CASE TO DRG NO 30041 ST 2 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
E
Nonestab
14) PACKING BOX FOR 12 7mm SRCG AS PER DRG NO FC ELB000411 AND Y36314 A 00[74]()
1) SEALING RING TO DRG.NO.TRD-1-2-2246 (9911357874)()
SEALING RING TO DRG.NO.TRD-1-2-2246
C
NOT ESTABLISHED
2) SLIPPING RING F1301-152220-B (6770430100)()
SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD.15/01/01 SPECN:- F1301-924320-D (CQA-4919) DC NO-36730-A DTD.15/01/01
C
NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER 520:9 DRG TRD 422155[99]()
Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.[61]()
Specification : SPECN. IA 1285(B
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6206500061 MINE BODY A T DRILL 1A ND EMPTY[62]()
Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C ND TO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06, SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL[61]()
Specification : CQA (A) 1837
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1749009905 RIVET ITX 239 MINE AP 1B DIR[17]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
1) SLIPPING RING (6770430100)
Description : SLIPPING RING (6770430100)()
Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM SLEEVE FOR M-92[64]()
Specification/Drawing No.
OFN/BMCS/M-92/PLASTIC FILM SLEEVE
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-92[64]()
Specification/Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-91[64]()
Specification/Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Loop Sling Front for JVPC[70]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
2) GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA
C
Nonestab
3) TRIGGER GUARD MOULDING for JVPC[70]()
Specification : TRIGGER GUARD MOULDING for JVPC DRG. NO.0204-03-03-16-26-000-00DD
C
Nonestab
4) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
5) COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE[70]()
Specification : COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE
C
Nonestab
6) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Nonestab
7) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm
Description : Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm()
Specification : AS PER DRG.
C
Estab
2) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775
Description : GUARD HAND ASSEMBLY TO DS CAT NO1005 007775()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) TEFLON SHEET FILM
Description : TEFLON SHEET FILM()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84MM TPT PROJECTILE
Description : PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84MM TPT PROJECTILE()
Specification : PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE
C
Estab
2) ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI
Description : ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI()
Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.
C
Estab
3) ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
Description : ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI()
Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
Specification : EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 1990 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM
2) SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
Description : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE()
Specification : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) CONTAINER WITH DISC CLOSING
Description : CONTAINER WITH DISC CLOSING()
Specification : CONTAINER WITH DISC CLOSING TO DRG. NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-A DT. 09-03-2001,SHEET-2 DC-35684-A DT.06-04-94 TO SPECN.CQA(A) 2303(f).
Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN. CQA(A) 1817(t) DC NO.37096-A, DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI
C
Estab
5) AMMN.CONTAINER 47 B
Description : AMMN.CONTAINER 47 B()
Specification : AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A RETRACED Dt.12.07.2013.
C
Estab
6) POLYTHENE BAG TO DRG.CIA/AMN/2185
Description : POLYTHENE BAG TO DRG.CIA/AMN/2185()
Specification : POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10, PART NO.ISV-1627, DC NO.36832-A, DT.10.5.02. MATERIAL LOW DENSITY POLYETHYLENE TYPE-1 TO SPECN: JSS-9330-03:2014 REV-3 DC NO.5292 ME, DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK.
C
Estab
7) CUP
Description : CUP()
Specification : DRG. NO. ARDE 2043 DET. NO. 5 PART NO. ISV-1764 DC NO. 36356-A, SPECIFICAITON NO. CQA(A) 2804(m) DC NO. 36202-A.
C
Estab
8) CONTAINER TO ARDE-1933, DET-4,PT.NO.
Description : CONTAINER TO ARDE-1933, DET-4,PT.NO.()
Specification : CONTAINER TO ARDE-1933, DET-4, PT.NO. ITV 170, DC NO.36207-A, DT. 02-12-96 SPECN. CQA(A)-2322(r) DC 37329-A.
C
Estab
9) PLUG FUZE HOLE 50.8 MM 2A PLASTIC
Description : PLUG FUZE HOLE 50.8 MM 2A PLASTIC()
Specification : ISX-315 DESIGNERS REF NO. CIA/AMN/2171 DC NO.37347-A DT.29.10.13.
C
Estab
10) GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT
Description : GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT()
Specification : DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO. CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/ CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
Specification : OBTURATOR TO DESIGNER REF.NO.155- 1140, DC NO.37025-A, DT.08.08.2005.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 275MM[99]()
Specification : SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG. PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:275MMx 142MMx 12(-) 1 MM TYPE 2
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 265mm[99]()
Specification : SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECN: IS-4671-1984(FIRST REVISION) REAFFIRMED 1995 SIZE:265MMx 146MMx 12(-) 1 MM
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) EXPANDED POLYSTYRENE FOAM 146mm[21]()
Specification : TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METER TO SPECIFICATION IS:4671-1984(FIRST REVISION), REAFFIRMED 1995, SIZE:146MMx 120MMx 12MM
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE[00]()
Specification : DRG NO FS 2368C
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TRANSIT PLUG TO CQA AMMN DRG NO 155 1065[00]()
Specification : TRANSIT PLUG TO CQA(AMMN)DRG.NO.155-1065,DC 36792-A DT. 01-11-01.
Specification : SUPPLY OF HEAD ROCKET BODY (PRE-MACHINED) AS PER DRG.NO: O ROC 060 1 230 REV.1.(O ROC 060 1 230 REV.1 ) L..F No. 0126701093
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) RING[02]()
Specification : AS PER ENCLOSED MONITORING INSTRUCTION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) TRACER PLUG ASSEMBLY[01]()
Specification : 1) TRACER PLUG ASSEMBLY (120/125MM) AS PER DRG. NO.ISX20 SA
2) CONSISTING OF COMPONENTS TRACER PLUG (PHOSPHATED) AS PER DRG. NO. ISX328
3) FITTED WITH BRASS DISC AS PER DRG.NO. ISX329
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STRIP FOR RGB 60[01]()
Specification : AS PER ENCLOSED DRAWING AND QAP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DISC MOD 1 FOR RGB 60[01]()
Specification : as per enclosed specification
R
Nonestab
2) SOCKET FOR RGB 60[01]()
Specification : as per enclosed specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) AVIATION COMPRESSOR AK150C OR AK150CB TO 6206406244[62]()
Specification : AVIATION COMPRESSOR AK150C OR AK150CB TO DRG NO. 155.38.067-1
