List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
121 Kariwala Synthetic (P) Ltd.
62, Jhajharia Cloth Market, General Ganj, Kanpur UP.
PIN1 : 208001
Phone No. : 0512-2352659
GSTIN : 09AAACK5992J1Z0 		KNPK00279G

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Batting Polyester 200 GSM() IND/TC/4587 R Not estab.
2) Thermal Bonded Batting Polyester 100 GSM 150 cm width() As per Requirements & Specification R Non Established
Category : P
Grade : III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) NON WOVEN POLYESTER BATTING PREQUILTED WITH PP SCRIM USING ULTRASONIC WELDING 200 GSM WIDTH 180 CM[20]() Specification : AS PER APPENDIX – A OF PROV SPEC NO S/6421/BAG SLEEPING LT WT/TC - 6 R Estab
2) TRADE FABRICATION FOR ASSEMBLY OF BAG SLEEPING LT WT FROM QUILTED PANELS[20]() Specification : Specification: PROV. SPEC. NO.S/6421/Bag Sleeping Lt. Wt/TC-6 With special Terms & Conditions Enclosed R Estab
3) TRADE FABRICATION OF S QUILTING AND STRAIGHT QUILTING PANNELS OF INNER AND OUTER WITH ALL THE COMPONENTS OF BAG SLEEPING LIGHT WT[20]() Specification : Specification: PROV.SPECN. NO.S/6421/BAG SLEEPING LT WT/TC-6 with special terms & conditions enclosed. R Estab
Category :
Grade : Grade III
Size : S
122 STEEL AUTHORITY OF INDIA LIMITED
ISPAT BHAWAN, LODHI ROAD NEW DELHI Delhi
PIN1 : 110003
Phone No. : 22501256
GSTIN : 19AAACS7062F6Z6 		CALS12019A

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) PARTED SHELL BILLETS FOR BODY 105MM CARRIER SHELLS AS PER DRG NO SK 9748 B and MEETING THE REQUIREMENT AS PER DRG NO SK 5934 C[65]() Specification : PARTED SHELL BILLETS FOR BODY 105MM CARRIER SHELLS AS PER DRG. NO.SK-9748/B & MEETING THE REQUIREMENT AS PER DRG NO SK-5934/C R Estab
Category :
Grade : Grade III
Size : L
123 PMT ENGINEERS
PLOT NO 7, OPP I.P.COLONY(SEC-49) BADHKAL-PALI ROAD, BHANKRI FARIDABAD Haryana
PIN1 : 121005
Phone No. : 4102721
GSTIN : 06ABZPG7947A1ZC 		RKTG08611B

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHUTTER DRIVE MECHANISM ASSY TO 6206102024[62]() Specification : SHUTTER DRIVE MECHANISM ASSY TO DRG NO. 172.02.171CB-BCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 9911842583 HINGE AS PER DRG NO OFB C 1410[07]() Specification : Drg.No. OFB/C/1410-A E Nonestab
2) 9911842582 HINGE AS PER DRG NO OFB C 1565[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
Category :
Grade : Grade III
Size : S
124 ALPHA ECH
NO-7 SHANTHI NAGER KANADAPALAYAM MAIN ROAD AVADI CHENNAI Tamil Nadu
PIN1 : 600062
Phone No. : 9841634630
GSTIN : 33ABEPI6365B1Z2 		ABEPI6365B

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) ROLLER SUPPORT TO 6206203018[62]() Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB C Nonestab
Category :
Grade : Grade III
Size : S
125 HARINATHINDUSTRIES
Sidco industrial estate ambattur Eb road Chennai Tamil Nadu
PIN1 : 600098
Phone No. : 7094407343
GSTIN : 33ANNPM2952R1ZA 		CHES55047G

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102068[62]() Specification : SHAFT TO DRG NO.175.02.046CB-2CB C Nonestab
2) CLUTCH SHAFT ASSY TO 6206419017[62]() Specification : CLUTCH SHAFT ASSY TO 172.63.068CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102068[62]() Specification : SHAFT TO DRG NO.175.02.046CB-2CB C Nonestab
2) CLUTCH SHAFT ASSY TO 6206419017[62]() Specification : CLUTCH SHAFT ASSY TO 172.63.068CB C Nonestab
3) ROLLER SUPPORT TO 6206203018[62]() Specification : R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102068[62]() Specification : SHAFT TO DRG NO.175.02.046CB-2CB C Nonestab
2) CLUTCH SHAFT ASSY TO 6206419017[62]() Specification : CLUTCH SHAFT ASSY TO 172.63.068CB C Nonestab
3) SHAFT TO 6206102096[62]() Specification : R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102068[62]() Specification : SHAFT TO DRG NO.175.02.046CB-2CB C Nonestab
2) CLUTCH SHAFT ASSY TO 6206419017[62]() Specification : CLUTCH SHAFT ASSY TO 172.63.068CB C Nonestab
3) SHAFT LH ASSY TO 6206419040[62]() Specification : R Nonestab
Category :
Grade : Grade III
Size : S
126 SHREE MAHALAXMI INDUSTRIES
39/309 VALLABHNAGAR PIMPRI VALLABHNAGAR PUNE Maharashtra
PIN1 : 411018
Phone No. : 9503901010
GSTIN : 27AFNPD5213N1Z9 		27AAFNPDNN

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF COMPONENTS CONSISTING OF 11 ITEMS(EMPTY) FOR MARKER MAN OVER BOARD[62]() Specification : DRG. NO. NAI(P) 511 (PROV) C Nonestab
Category :
Grade : Grade III
Size : SS
127 A.S.P. MFG. CO. PVT. LTD.
43/H/9, CHAULPATTY ROAD HOWRAH WEST BENGAL
PIN1 : 700010
Phone No. : 033-2353-1892, 2353-6090, FAX-033-2353-6090
GSTIN : 19AACCA1213A1ZK 		CALA04199G

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) BLANK FOR STUD CHANGE LEVER FOR RIFLE 5.56MM INSAS.() AS PER DRAWING. C Not Estab.
2) BLANK FOR STUD CHANGE LEVER EXR. FOR RIFLE 5.56MM EXCALIBUR. MK-1() AS PER DRAWING C Not Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SLIDE RATRACTING FOR INSAS 5.56 MM() DRG. NO. SK-3143/30 C Estab.
2) EJECTOR FOR INSAS 5.56 MM() DRG. NO. SK-2689/1-5 C Estab.
3) DOVETAIL FOR INSAS 5.56 MM() DRG NO. SK-4143/66 C Estab.
4) SEAR FOR INSAS 5.56 MM() DRG. NO. ARDE/SK-2689/239 R5 C Estab.
5) LOCK RETAINER FOR INSAS 5.56 MM() DRG. NO. SK-2689/291 C Estab.
6) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
7) BUTTON CATCH MAGAZINE FOR JVPC() AS PER DRG. C Non Established
Category : P
Grade : III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLADE FORE SIGHT FOR 9MM AUTO PISTOL[70]() Specification : BLADE FORESIGHT TO DS CAT NO. 1005-003197 to 1005-0032011005-006582 & 1005-006583 (LT. DC-26826-SA DT.06-05-16 )FOR PISTOL AUTO 9MM 1A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) ARM SEAR CONNECTING FOR 9MM AUTO PISTOL.[70]() Specification : ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FORE SIGHT 1005 007737 IN FINISHED CONDITION Description : FORE SIGHT 1005 007737 IN FINISHED CONDITION() Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C Description : Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C() Specification : AS PER DRG. C Estab
2) FORE SIGHT 1005 007737 IN FINISHED CONDITION Description : FORE SIGHT 1005 007737 IN FINISHED CONDITION() Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16 C Estab
3) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024() Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 C Estab
4) Housing Plunger to DS CAT NO 1005 007900 Description : Housing Plunger to DS CAT NO 1005 007900() Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16 C Estab
5) HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION Description : HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION() Specification : HOUSING LUG SLING TO DRG. NO. ARDE SK- 3145/80, DS CAT NO. 1005-008021 IN FINISHED CONDITION. DC(I) NO. 26949-SA ,DT. 27-09-16 C Estab
6) EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE/ Alt Material TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16 Description : EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE/ Alt Material TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16() Specification : TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16 C Estab
7) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM Description : BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM() Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition C Estab
8) SEAR FOR SMALL ARMS Description : SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Lock Retainer drg .no. ARDE SK-2689/291 / 5340-015159 for LMG/Rifle 5.56mm Description : Lock Retainer drg .no. ARDE SK-2689/291 / 5340-015159 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
10) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
11) FORE SIGHT IN FINISHED CONDITION FOR CARBINE 5 56MM Description : FORE SIGHT IN FINISHED CONDITION FOR CARBINE 5 56MM() Specification : FORE SIGHT DRG NO AKC 01/6 IN FINISHED CONDITION. FOR CARBINE 5.56MM C Estab
12) Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD Description : Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD() Specification : Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD C Estab
Category : p
Grade : 3
Size : S
128 ARVIND LIMITED
NARODA ROAD AHMEDABAD GUJARAT
PIN1 : 380025
Phone No. : 079-30138090
GSTIN : 24AABCA2398D1Z0 		AABCA2398D

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Polyester Cotton Disruptive Pattern (250GSM) for Jungle with Army Logo 152cms() PROV/OCFAV/FABRIC/001(a)&(b) R Estab
2) Cloth Plain Weave Polyester Cotton Khaki 138 cms() IND/TC/0042(f) R Not Estab
3) Cloth Drill Cotton Mineral Khaki 142 cms() IS:177-1989 (latest) V.No. 3&4 R Not Estab
4) Cloth Drill Cotton Greenish Khaki 142 cms() IS:177-1989 (latest) V.No. 3&4 R Not Estab
5) Cloth Drill Cotton Navy Blue 142 cms() IS:177-1989 (latest) V.No. 3&4 R Not Estab
6) Cloth Drill Cotton White Bleached 142 cms() IS:177-1989 (latest) V.No. 3&4 R Not Estab
7) Cloth Drill Cotton White Bleached 91 cms() IS:177-1989 (latest) V.No. 3&4 R Not Estab
8) Cloth Drill Cotton Dark Grey 142 cms() IS:177-1989 (latest) V.No. 3&4 R Not Estab
9) Cloth Cotton Poplin Light Blue 150 cms() IS:188 (Latest) R Not Estab
10) Cloth Cotton Light Blue 142 /150 cms() IS:2970 (Latest) R Not Estab
11) Polyester Mesh Interlining OG 142 cms() As per TE Specification R Not Estab
12) Cloth Plain Weave Polyester Viscose Light Blue 148 cms () IAFS:01077 R Not Estab
13) Cloth Plain Weave Polyester Light Blue 148 cms (Dope Dyed)() IAFS:01030 R Not Estab
14) Cloth PV Dope Dyed Fabric Khaki() IND/TC/0048(d) R Not Estab
15) Cloth Mockleno Weave Polyester Cotton Black 150 cms() PROV/OCFAV/FABRIC/005 R Not Estab
16) Cloth Mercerized Cotton Light OG 142 cms() PROV/OCFAV/FABRIC/004 R Not Estab
17) Cloth Plain Weave Polyester & Viscose Dope Dyed Darker OG 150 cms() IND/TC/0048(d) R Not Estab
18) Fabric Nylon 75 gms UD 91 cms() ADRDE/SPECN/1980/5(a) R Not Estab
Category : DDP
Grade : I
Size : L
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Plain Weave Polyester Cotton Khaki 138 cms[21]() Specification : IND/TC/0042 (f) R Nonestab
2) Cloth Drill Cotton Navy Blue 142 cms[21]() Specification : IS:177 (V.No.4) & IV th Revision Reaffirmed 1997 R Nonestab
3) Cloth Drill Cotton Mineral Khaki 142 cms[21]() Specification : IS:177 R Nonestab
4) Cloth Polyester Cotton Disruptive Pattern (250GSM) for Jungle with Army Logo 152cms[21]() Specification : PROV/OCFAV/FABRIC/001(a)&(b) R Estab
5) Cloth Drill Cotton Greenish Khaki 142 cms[21]() Specification : IS:177-1989 (latest) V.No. 3&4 R Estab
6) Cloth Drill Cotton White Bleached 142 cms[21]() Specification : IS:177-1989 (latest) V.No. 3&4 R Nonestab
7) Cloth Drill Cotton White Bleached 91 cms[21]() Specification : IS:177-1989 (latest) V.No. 3&4 R Nonestab
8) Cloth Drill Cotton Dark Grey 142 cms[21]() Specification : IS:177-1989 (latest) V.No. 3&4 R Estab
9) Cloth Cotton Poplin Light Blue 150 cms[21]() Specification : IS:188 (Latest) R Nonestab
10) Cloth Cotton Light Blue 142 /150 cms[21]() Specification : IS:2970 (Latest) R Nonestab
11) Polyester Mesh Interlining OG 142 cms[21]() Specification : As per TE Specification R Estab
12) Cloth Plain Weave Polyester Viscose Light Blue 148 cms [21]() Specification : IAFS:01077 R Nonestab
13) Cloth Plain Weave Polyester Light Blue 148 cms (Dope Dyed)[21]() Specification : IAFS:01030 R Nonestab
14) Cloth PV Dope Dyed Fabric Khaki[21]() Specification : IND/TC/0048(d) R Nonestab
15) Cloth Mockleno Weave Polyester Cotton Black 150 cms[21]() Specification : PROV/OCFAV/FABRIC/005 R Nonestab
16) Cloth Mercerized Cotton Light OG 142 cms[21]() Specification : PROV/OCFAV/FABRIC/004 R Nonestab
17) Cloth Plain Weave Polyester & Viscose Dope Dyed Darker OG 150 cms[21]() Specification : IND/TC/0048(d) R Nonestab
18) Fabric Nylon 75 gms UD 91 cms[21]() Specification : ADRDE/SPECN/1980/5(a) R Estab
19) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]() Specification : Specification No:PROV/OCFAV/FABRIC/005 R Nonestab
Category : DDP
Grade : I
Size :
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges[21]() Specification : Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges. Specification No.1201908/001 R Estab
Category : DDP
Grade : I
Size :
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH NYLON COTTON 50 50 WITH CAMOUFLAGE PRINT 200 GSM[21]() Specification : PROVISIONAL SPEC NO. OCFAV/FABRIC/NYCO/001 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabric Nylon 75 GSM U/D 91 cms() As per Requirements & Specifications R Non Established
2) Fabric Twill Weave Poly. & Cotton (67:33) Disruptive Patt. WR 290gsm 150 cm Width (Min)with Indian A() As per Requirements & Specifications R Non Established
Category : DDP
Grade : I
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabric Nylon 75 GSM U/D 91 cms[21]() Specification : As per Requirements & Specifications R Estab
2) Fabric Twill Weave Poly. & Cotton (67:33) Disruptive Patt. WR 290gsm 150 cm Width (Min)with Indian A[21]() Specification : As per Requirements & Specifications R Estab
3) Cloth Twill Weave Polyester & Cotton (20:80) 250 GSM Greenish Khaki 150 Cm Width(Min)[21]() Specification : Provisional Specification No. PROV/S/2599/TC-11/2009/ 02 As Per Relevant Clause Of Specification. R Nonestab
Category : DDP
Grade : I
Size :
1) Ordnance Equipment Factory
Name Specification Use Status
1) CAMBRIC COTTON WHITE 91 CMS.() IND/TC/0015 (c) R Established
2) CANVAS COTTON 410 GMS. KHAKI 91 CMS.() IS: 1424-1983 V. N0. 4 R Established
3) CANVAS COTTON 410 GMS. O.G. WP 91 CMS.() IS: 1424-1983 (V.NO.4) AND WATER PROOFNESS TO IS: 6803-1972 R Established
4) CANVAS COTTON 545 GMS. SCOURED 91 CMS.() IS:1424 (VARIETY NO. 3) & MODIFICATION AS PER ANNX. "A" R Established
5) CLOTH CANVAS COTTON 680 GR.O.G. WP 91 CMS.() IS: 1424-1983 (V.NO.2) REAFMD.1995 & WATERPROOFNESS TO IS:6803 R Established
6) CANVAS COTTON 815 GMS O.G W.P. 91 CMS() IS: 1424-1983 (VARIETY NO.1) AND WATER PROOFNESS TO IS: 6803-1972 R Established
7) CANVAS NYLON 220 GRAM O.G 91 CMS() IND/ADE/0065 (A) R Established
8) CLOTH CALICO COTTON KHAKI 91CM() IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R Established
9) CLOTH CALICO COTTON WHITE 91 CMS() IS: 5088-1982 (V.NO.3) R Established
10) CLOTH CALICO COTTON WHITE BLEACHED 91 CM.() IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Established
11) CLOTH CANVAS COTTON 545 GMS. O.G W.P. 91 CMS. WIDE() IS:1424-1983 (V.NO.3) AND WATER PROOFNESS TO IS : 6803-1972 R Established
12) CLOTH CANVAS COTTON 680 GR.O.G. WP 91 CMS.() IS: 1424-1983 (V.NO.2) REAFMD.1995 & WATERPROOFNESS TO IS:6803 R Established
13) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CMS. WIDE() IS: 2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95 R Established
14) CLOTH COTTON CANVAS 410 GMS. KHAKI 91CM.() IS: 1424-1983 VARIETY NO.4 duly flame proofed R Established
15) CLOTH COTTON CLOSELY WOVEN 170 GM WHITE WR 91 CM() AS PER REQUIREMENT & SPECIFICATION R Established
16) CLOTH COTTON CLOSELY WOVEN 170 GMS SAND COLOUR W.R. 91 CMS() JSS: 8305-5-2000 V.NO. "A" (SHADE NO. 388 OF IS:5) R Established
17) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.() JSS: 8305-5-2000 VARIETY NO. "A" R Established
18) CLOTH COTTON CLOSELY WOVEN 170 GRM DUAL SHADE (OG/ WHITE) WR 91 CMS.() JSS: 8305-5-2000 (FIRST REVISION) R Established
19) CLOTH COTTON CLOSELY WOVEN 235 GRMS. DUAL SHADE (WHITE/OG) W.R. 91 CMS() JSS: 8305-5-2000 (REV.NO. 1) VARIETY "B" R Established
20) CLOTH COTTON CLOSELY WOVEN 310 GM W.R. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
21) CLOTH COTTON DOSUTI BLUE 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
22) CLOTH COTTON DOSSUTI KHAKI 91 CMS WIDE() IS: 179-1977 (REAFF. 1997) EDITION 3.5 (1998-05) V.NO.4 R Established
23) CLOTH COTTON DOSSUTI O.G. 91 CMS WIDE() IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Established
24) CLOTH COTTON DOSSUTI SCOURED 91 CM.() IS: 179-1977 VARIETY NO. 4 R Established
25) CLOTH COTTON DOSUTIE GREEN 91 CMS WIDE() IS: 179-1977 V.NO. 4 REAFFIRMED 1997 EDITION 3.5 (1998-05) R Established
26) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1) R Established
27) CLOTH COTTON O.G. W.R. 375 GR. FOR CAPES 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. "A" R Established
28) CLOTH COTTON OG WATER REPELENT FOR CAPES WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 95 (V.NO.1) R Established
29) CLOTH COTTON SCOURED W.R. FOR CAPES. 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. A R Established
30) CLOTH DRILL COTTON DISRUPTIVE PATT VAT PRINTED 142 CMS WIDE() IND/TC/0044 (d) CONFORMING TO VARIETY NO. 3 R Established
31) CLOTH DRILL COTTON DISRUPTIVE PATTERN VAT. PRINTED 142 CMS WIDE V.NO.4() AS PER REQUIREMENT & SPECIFICATION R Established
32) CLOTH DRILL COTTON O.G. 142 CMS.() IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Established
33) CLOTH DRILL COTTON O.G. 91 CMS WIDE PROOFED() IS: 5088 PT.-II LATEST R Established
34) CLOTH DRILL COTTON WHITE BLEACHED 142 CM V.NO 3() IS: 177-1989 V.NO.3 R Established
35) CLOTH DUCK COTTON 610 GR. SCOURED 91 CM.WIDE.() IS: 1422-1983(V.NO.2) REAFF. 2000 WITH AMDT.NO.1 R Established
36) CLOTH DUCK COTTON 340 GMS O.G. 91 CMS.() IS: 1422 V.NO.4 & MODIFICATION AS PER ANNX. A R Established
37) CLOTH DUCK COTTON 340 GMS. O.G. WP 91 CMS() IS: 1422:1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972 R Established
38) CLOTH DUCK COTTON 340 GMS SCOURED 91 CMS.() IS: 1422-1983 (V.NO 4) REAFF. 2000 WITH AMDT.NO.1 OF APR.,87 R Established
39) CLOTH DUCK COTTON 340 GMS.SCOURED W.P. -- 91.4 CM.() IS: 1422-1983 VARIETY NO.4 IS;6803 LATEST FOR WATER PROOFNESS. R Established
40) CLOTH DUCK COTTON 475 GMS. O.G. 91 CMS.() IS: 1422-1983 (V.NO.3) REAFFIRMED 2000 WITH AMDT.NO.1 OF APRIL R Established
41) CLOTH DUCK COTTON 475 GMS. O.G. W.P 91 CM VAT DYED() IS: 1422-1983 (V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
42) CLOTH DUCK COTTON 475 GMS. SCOURED 91 CMS() IS: 1422-1983 V. NO 3 R Established
43) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS() IS: 1422-1983 V. NO 3 WATER PROOFNESS TO IS:6803 LATEST R Established
44) CLOTH DUCK COTTON 475 GMS UNDYED 91 CMS() IS: 1422 V.NO.3 & MODIFICATION AS PER ANNX. A R Established
45) CLOTH DUCK COTTON 475 GR KHAKI 91 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
46) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.() IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS:6803 LATEST R Established
47) CLOTH DUCK COTTON 475 O.G W.P.AND RP 91 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
48) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS() IS: 1422-1983 V.NO. 2 R Established
49) CLOTH DUCK COTTON 610 GMS KHAKI W.P. 91 CM() IS: 1422:1983 V.NO. 2 R Established
50) CLOTH DUCK COTTON 610 GR. KHAKI W.P 76 CM WIDE() IS: 1422-1983(V.NO.2)(REAFF. 2000) WITH AMDT.NO.1 OF APRIL R Established
51) CLOTH DUCK COTTON 610 GR. SCOURED W.P. RP 91 CM WIDE() IS: 1422-1983 V. NO 2 WATER PROOFNESS TO IS:6803 LATEST R Established
52) CLOTH DUCK COTTON 745 GMS. O.G. W.P. 91 CMS() IS: 1422-1983 (V.NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Established
53) CLOTH DUCK O.G. RIP STOP 50:50 POLYSTER :COTTON BLEND IN 700 GRM./SQ.MTR.,W.P., R.P. 91 CMS WIDE() SUPPLY BY DMSRDE R Established
54) CLOTH DUCK OG RIP STOP 50:50 POLYSTER:COTTON BLEND, IN 400 GRM/SQ.MTR. W.P. R.P., 91 CMS. WIDE() SUPPLY BY DMSRDE R Established
55) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.() IS: 13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
56) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 91 CM.() IS:13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
57) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. OG WP 135 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
58) CLOTH DUCK POLYSTER/COTTON RIP STOP FABRIC (HEAVY) O.G. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
59) CLOTH DUCK RIP STOP COTTON 610 GMS O.G. W.P. 135 CMS. WIDE() IND/TC/0145 R Established
60) CLOTH MAZARI LIGHT 142 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
61) CLOTH MUSLIN WHITE BLEACHED 91 CMS. WIDE() IND/TC/0002(j) R Established
62) CLOTH PLAIN WEAVE POLYESTER & COTTON KHAKI 137 CMS.() OEFC/01/PCK/ 2003 R Established
63) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
64) CLOTH PLAIN WEAVE POLYESTER VISOCOSE DOPE DYED KHAKI WIDTH 138 CMS.() OEFC/01/PCK/ 2003 R Established
65) CLOTH COTTON DOSUTIE SCOURED 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
66) COTTON DOSUTI WHITE BLEACHED 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
67) COTTON FABRIC S.D. PARA SCOURED 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
68) COTTON FABRIC SCOURED FOR S.D. PARACHUTE TYPE-I 91 CMS.() IS: 2970-1987 (REAFF. 1999) (FIRST REV.) R Established
69) COTTON KNITTED FABRIC 2/2 RIB KNIT WHITE BLEACHED 46 +_ 1 CMS. WIDE - UNPRROFED() IND/NAVY/TC/4287(b) EXCEPT FLAME PROOFING AND WEIGHT R Established
70) COTTON KNITTED FABRIC PLAIN RIB KNIT WHITE BLEACHED TUBULAR FORM 46+_1 CMS. UNPROOFED() CONFIRMING TO SPECN. NO. IND/NAVY/TC/4273(e) EXCEPT FLAME R Established
71) CLOTH DRILL COTTON DISRUPTIVE PATT VAT PRINTED 142 CMS WIDE() IND/TC/0044 (d) CONFORMING TO VARIETY NO. 3 R Established
72) DRILL COTTON DISRUPTIVE PATTERN VAT PRINTED 91 CMS() IND/TC/0044 R Established
73) DRILL COTTON DISRUPTIVE VAT PRINTED 89.5 CMS.() IND/ME/975(PROV) R Established
74) DRILL COTTON WHITE BLEACHED 91 CMS.() IS: 177-1977 R Established
75) DUCK COTTON 476 GMS. SULPHAR KHAKI 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
76) DUCK COTTON 610 GMS O.G. W.P. 91 CMS.() IS: 1422-1983 (V.NO.2), REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
77) DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP 91 CMS. WIDE VARIETY NO. 1 VAT DISPRESE DYED() AS PER REQUIREMENT & SPECIFICATION R Established
78) CLOTH DUCK POLYSTER/COTTON RIP STOP FABRIC (HEAVY) O.G. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
79) DUCK POLYESTER/COTTON BLENDED RIP STOP (MADE FROM-RING SPUN YARN) OG WP ROT PROOFWITH FIRE RETARDANT() IS: 13510-2000 RING SPUN YARN (V.NO.1) MASS R Established
80) DUCK POLYESTER/COTTON BLENDED RIP STOP (MADE FROM-RING SPUN YARN) OG WP ROT PROOFWITH FIRE RETARDANT() AS PER REQUIREMENT & SPECIFICATION R Established
81) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS() PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Established
82) FABRIC COTTON 125 GSM SKY BLUE 155 CMS WIDE() AS PER TABLE-2 OF SPECN.NO. AIR HQ/JDQAS/OK-004 R Established
83) FABRIC COTTON 50 GM OG 100 CMS WIDE() DMSRDE/T&GS/97/415/TEX-4/3(b) R Established
84) FABRIC COTTON CLOSELY WOVEN 235 GR. BLACK WR 91 CM() JSS: 8305-5 R Established
85) FABRIC COTTON CLOSELY WOVEN 237 GRMS. BLACK 91 CMS WIDE() JSS: 8305-5 EXCEPT WL. SHADE WHICH SHALL BE BLACK R Established
86) FABRIC COTTON CLOSELY WOVEN 305 GRAM DUAL SHADE (WHITE/O.G.) W.R. 91 CM WIDE() IND/TC/0116(F) R Established
87) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPES WATER PROOF 76 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 1995 VR.NO.1 R Established
88) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
89) FABRIC COTTON O.G.W.R. FOR CAPS WP 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
90) FABRIC COTTON O.G.WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
91) FABRIC COTTON OG WATER REPELLENT FOR CAPES WATER PROOF 76 CMS.() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 1995 VR.NO.1 R Established
92) FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CM.() IS: 2422 VERIETY 4 R Established
93) FABRIC COTTON WHITE KNITTED 92 CMS.() IND/NAVY/TC/4273 ANNEX. A R Established
94) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.() PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Established
95) FABRIC NYLON 91CMS WIDE CAMAUFLAGING PRINTED WT/SQM 125 GRM.() IND/TC/3020 (a) FOR NYLON FABRIC AND DMSRDE/T&GS/89/377 (b) R Established
96) FABRIC NYLON 250 GMS. BLACK PU COATED 135/136 CMS.() IND/TC/0155 R Established
97) FABRIC NYLON 250 GRMS. DISRUPTIVE POLYURETHENE COATED 135/136 CMS.() IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/- R Established
98) FABRIC NYLON 250 GSM DISRUPTIVE PATTERN P.U. COATED 140/142 CMS. WIDE() IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH R Established
99) FABRIC NYLON 48 GMS OG P.U.COATED 122 CM. WIDTH() MASS/M2-48+-2 GMS., B.S.- 65KGS, WRAP-55KGS, WEFT-PLAIN,THICKNESS-0.08 R Established
100) FABRIC NYLON 66 LT. WEIGHT 56 GSM +/- 5 % : BLUE SHADE() AS PER REQUIREMENT & SPECIFICATION R Established
101) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM. WIDE() SCH. NO. DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R Established
102) FABRIC NYLON ASSORTED COLOUR FOR BAG SLEEPING() AS PER REQUIREMENT & SPECIFICATION R Established
103) FABRIC NYLON FC/FR TREATED 95 GMS. OG 100CM WIDE() DMSRDE/T & GS/97/415/TEX -4/1(B) R Established
104) FABRIC NYLON FC/FR TREATED 95 GMS. OG 120 CM WIDE() DMSRDE/T & GS/97/415/tex-4/1(b) R Established
105) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 63 GRMS.TYPE-II 122 CMS. WIDE() AS PER REQUIREMENT & SPECIFICATION R Established
106) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 76 GRMS.TYPE-I 122 CMS.WIDE() AS PER REQUIREMENT & SPECIFICATION R Established
107) FABRIC NYLON PVC COATED OG FLAME RETARDANT 135CM WIDE() DMSRDE/T&GS/83/306 R Established
108) FABRIC NYLON TAFFETA 85 GSM WATER RESISTANT 155 CMS WIDE NAVY BLUE() AS PER TABLE-1 OF SPECN.NO. AIR HQ/JDQAS/OK-004 R Established
109) NYLON FABRIC 220 GMS O.G. 100 CM WIDE WATER & OIL REPELLENT() PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B) R Established
110) FLANNELETTE LINING BROWN 142 + -1 CM WIDE WITH FIRM SELVAGE() IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO R Established
111) LINING CLOTH POLYSTER 100% BLACK 110 CMS. WIDE() AS PER REQUIREMENT & SPECIFICATION R Established
112) LINING CLOTH POLYSTER WHITE 100% 110 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
113) LINING POLYSTER BROWN PRINTED 110CMS() AS PER REQUIREMENT & SPECIFICATION R Established
114) LONG CLOTH COTTON KHAKI 91 CM() IS: 187-1987 (V. NO.1) EXCEPT THAT (1) IN APPEARANCE SHADE R Established
115) LONG CLOTH COTTON WHITE BLEACHED 91 CMS() IS: 187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 R Established
116) LONG CLOTH RED 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
117) LONG CLOTH YELLOW 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
118) NYLON FABRIC 125 GMS. O.G. W.R. 91 CMS() IND/TC/3020 R Established
119) NYLON FABRIC 125 GMS. WHITE W.R. 91CM() AS PER REQUIREMENT & SPECIFICATION R Established
120) NYLON FABRIC O.G. POLYURETHANE COATED (250 GM/SQR M) 91 CM.() IND/TC/2314 (a) R Established
121) NYLON FABRIC O.G.PVC COATED 420 GMS/SQ METER 91 CMS() TSRDE/72/117 R Established
122) FABRIC NYLON BLACK 250 GMS PU COATED 172 CMS WIDE() IND/TC/0155 Except Threads/Cm (As per Appendix G of IND/TC/3844(a)) R Established
123) DRILL COTTON PROOFED WHITE (BLEACHED) 71 CMS.() IND/TC/097 (C) R Established
124) CLOTH MAZARI LIGHT 142 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
125) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
126) FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTERN 180 + 2 CM (NO NEG() CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX "A" & AS IN TE R Established
127) BREATHABLE RAIN COAT NYLON FABRIC NAVY BLUE 100 CMS. (MIN), 135 + - 10 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
Category : DP
Grade : I
Size : L
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH RIPSTOP POLYESTER COTTON 20 80 190 GSM DIGITAL PRINT WITH NIR CAMOUFLAGING AND ANTIBACTERIAL FINISH 152 CM WIDTH[21]() Specification : OCFAV/FABRIC/ACU/001 R Nonestab
Category :
Grade : Grade III
Size : L
129 SRT ENGINEERING ENTERPRISES
HNO 2-113,ROAD NO 5 SOBHANA COLONY HYDERABAD Telangana
PIN1 : 500042
Phone No. : 9346469489
GSTIN : 36AAUPY2207M1ZY 		AAUPY2207M

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) RECEIVER CTM 0178 1 TO CTM 0178 2[70]() Specification : RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2 C Nonestab
Category :
Grade : Grade III
Size : S
130 MUKAT ENGINEERING WORKS
B-47, SECTOR-8 SECTOR-8 NOIDA Uttar Pradesh
PIN1 : 201301
Phone No. : 4146821
GSTIN : 09ADGPL6054N1Z1 		6054ADGPLN

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) Catch to drg no 176 8145 Without Nitriding[65]() Specification : Catch to drg no 176 8145 (Without ) Nitriding C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-06 (LF 7440200332)[74]() Specification : DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-06 (LF 7440200332) C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) SHAFT DRG NOAF8314122 LF NO 7432411010[74]() Specification : SHAFT DRG NOAF8314122 LF NO 7432411010 C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) SETTING PIECE TO DRG No ATS7841055 LF 7440201587[74]() Specification : AS PER DRAWING C Nonestab
2) Bush to drg No U7888038 LF 7446003004[74]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) SLEEVE LF NO 7440201756[74]() Specification : SLEEVE LF NO 7440201756 C Nonestab
Category :
Grade : Grade III
Size : S
131 DHRUV CONTAINERS PVT. LTD.
27/A, NAGALWADI, NEAR MIDC INDUSTRIAL AREA, HINGNA ROAD, NAGPUR MAHARASTRA
PIN1 : 440016
Phone No. : (07104)236535/329826
GSTIN : 27AABCD3717B1Z6 		NGPD00328G

Download 		1) Ordnance Factory Dumdum
Name Specification Use Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C () AS PER OFDC SPECIFICATION E Non Established
2) STEEL BOX FOR BTU-250() AS PER OFDC SPECIFICATION E Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARRIER AMMUNITION 16A FOR MORTAR BOMB 81 MM ILLG. 2A() IA 1169(n) [DRG.NO. ARDE 2224 part no. ISV 550A] C Estab
2) SET OF 8 COMPONENTS FOR SHELL 105MM IFG COLOUR SMOKE() CQA(A) 2346(c) C Non Established
3) BOX STEEL C-239 FOR BOMB 3 KG() DRG. NO. ARDE 2148 DET NO. 6, AL.NO. 20/2008 DT. 21/7/2008 C Non Established
4) GENERATOR SMOKE NO. 5 MK-1 (EMPTY)() DRG. NO. ARM 1023 D2 SPECN. NO. DTD & P (AIR) 207/ARM C Non Established
Category : P
Grade : III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Steel Packing Case / Container() CQA(HV) SK-01 E Estab.
Category : P
Grade : II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) Tail Unit Assyembly 100-120 kgs() As per Drg. & Specification C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) AMMN. CONTAINER BOX C- 51A (STEEL) FOR PACKING OF 125 MM . HE() DRG. NO. ISV - 572 A C Estab.
2) AMMUNITION CONTAINER BOX C- 52A (STEEL) FOR PACKING OF 125MM HEAT() DRG. NO. ISV - 573 A C Estab.
3) AMMN. CONTAINER BOX C- 53A (STEEL) FOR PACKING OF 130 MM AMMN.() DRG. NO. ISV - 574 A C Estab.
4) AMMUNITION CONTAINER BOX C-43A (STEEL )() DRG. NO. ISV - 529 A C Estab.
5) AMMN. CONTAINER BOX M- 35 A (STEEL)() DRG. NO. ISV - 571 A C Estab.
6) BOX 8A PLYWOOD FOR MINE A/T 4D ND (BAR MINE)() DRG. NO. ISV - 429 A C Estab.
7) CARRIER AMMN. 13 A (STEEL)() DRG. NO. ISV - 488 A C Estab.
8) CONTAINER RK-33() DRG. NO. 4-24929 INDEX NO. 3 C Estab.
9) CYLINDER 239 MK 5/L FOR PACKING OF AMMN. ROCKET 68 MM HE() DRG. NO. SV - 55 A C Estab.
Category : DP
Grade : II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Load body complete LPTA & STLN-257470912701& B6510604C-1() As per specification / Drawings C Not Estab.
2) Floor Assy. LPTA &STLN -2611 5601B& Drg.No. 20703701/TSS() As per specification / Drawings C Not Estab.
3) Radiator mtg. Frame- 2069540000153() As per specification / Drawings C Not Estab.
4) Tail lamp bkt. (RH/LH)-9110296001000() As per specification / Drawings C Not Estab.
5) Assy. Cross Tube- 206489100118() As per specification / Drawings C Not Estab.
6) Insulated Water Tank S/S inner-9113114016000() As per specification / Drawings C Not Estab.
7) Fuel Tank-215447500102() As per specification / Drawings C Not Estab.
8) 5th Cross Member - 263631208201() As per specification / Drawings C Not Estab.
9) Engine Cross member-219831200106() As per specification / Drawings C Not Estab.
10) Assy. Air Tank Complete -21984300101() As per specification / Drawings C Not Estab.
11) 2KL S.S. water Bowser- 9113107471000() As per specification / Drawings E Not Estab.
12) 5 KL Water Bowser - () As per specification / Drawings C Non Established
13) Assy. MTG Spare Wheel Carrier-261440300004-V5() As per specification / Drawings C Non Established
14) Assy. Spare Wheel Lifting Unit-V350-2541-0026(V3)() As per specification / Drawings C Non Established
15) U-Bolt With Nut-2614-7080-3201(V2)() As per specification / Drawings C Non Established
16) Stud Front-215470618801N() As per specification / Drawings C Non Established
17) Stud for Water Tank Assy.-2614 7061 8801() As per specification / Drawings C Non Established
18) Stud Rear-215470618802N() As per specification / Drawings C Non Established
19) PackingU-ClampConsisting of 3items:-PackingU-Clamp(Taper)-000891-0598J-02Nos.,() As per specification / Drawings C Non Established
20) PackingU-ClampwithSlot-000891-0298J(V1)-02,PackingU-Clamp(plain)-VFJ/16/01/000514() As per specification / Drawings C Non Established
Category : P
Grade : III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MINE APM 16 A1 CONSISTING OF (1) BODY LOADING ASSY. (2) CONTAINER ASSY. (3) SPOOL ASSY.() CQA(A) 1804 C Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) CARRIER 7A/L() IA 1169(n)DC 35576-A Dt 08.09.93 E Not Estab.
2) BOX H5A() IA 1169(n)DC 35576-A Dt 08.09.93 E Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) box g 70 MK1 LA LF 6570160000 Description : box g 70 MK1 LA LF 6570160000() Specification : BOX G-70 MK1/ LA LF 6570160000 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000) Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)() Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BOX S 4 STEEL DRG NO NAI MB 9154 LF 6570011001 Description : BOX S 4 STEEL DRG NO NAI MB 9154 LF 6570011001() Specification : BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11 R Nonestab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) NOTCHED COIL TO ARDE 1933 PT ITV169() Specification : CQA (A) 2322 R Estab
2) BOX STEEL NO. S 6 MK1 DRG.ARDE 2225() Specification : DRG. NO. ARDE 2225 SHEET NO.3 R Estab
3) BOX NO. 582 MK-1() Specification : IA-1163 R Estab
4) CYLINDER 4A DESIGN CIA AMN 54() Specification : SPECN IA-1163 (1), DC 35592A R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) NOTCHED COIL Description : NOTCHED COIL() Specification : ARDE 1933 PART ITV-169 DETAIL NO. 3, DC.36529-A, DT.06.03.2008 C Estab
2) BOX H-60 MKI (INDIA) Description : BOX H-60 MKI (INDIA)() Specification : DRG.NO. ARM 1253 D-1,REV.NO-6 DT.27.06.96,DRG LIST NO.ARM 1253 SHEET- 1 REVISION NO.7 DT.01.08.96 SHEET-2 REV-5 DT.31.07.96 C Estab
3) CONTAINER 3 RK-33 Description : CONTAINER 3 RK-33() Specification : DRG.NO. 4-24929/3 RK 33/000, DC NO. 36434-A, DT-6.7.98, CONSISTING OF THE FOLLOWING ITEMS. (1) BODY TO DRG. NO. 4-24929/3 K33/010 (2) COVER TO DRG. NO. 4-24929/3 K33/020 DC 35604-A (3) BOLT TO DRG. NO. 4-24929/3 K33/030 (4) FORK TO DRG. N C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Butt Assembly DSCAT No.- 1005-000835 Description : Butt Assembly DSCAT No.- 1005-000835() Specification : AS PER DRG. C Estab
2) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE() Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided C Estab
3) 1.BIPOD ASSY. To DS CAT NO. 1005-557897 Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897() Specification : AS PER DRG. C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C Description : BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) STEEL CONTAINER IN FC Description :STEEL CONTAINER IN FC() Specification : AS PER DRAWING C Estab
3) COMPLETE BOX STEEL NO 1 MK 1 Description : COMPLETE BOX STEEL NO 1 MK 1() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C Description : BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) STEEL CONTAINER IN FC Description :STEEL CONTAINER IN FC() Specification : AS PER DRAWING C Estab
3) COMPLETE BOX STEEL NO 1 MK 1 Description : COMPLETE BOX STEEL NO 1 MK 1() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) COMPLETE BOX STEEL NO 1 MK 1 TO HOLD 1 TAIL UNIT NO TB 250 OR TAIL UNIT TB 250 MOD 1 IN FINISHED CONDITION Description : BOX STEEL NO 1 MK 1 TO HOLD 1 TAIL UNIT NO TB 250 OR TAIL UNIT TB 250 MOD 1 IN FINISHED CONDITION() Specification : DRG.NO.[ARDE 9501-05 SHT.1/3 & SHT.2/3 WITH DC "ISSUE A" DT-10-03- 05 & SHT.3/3 WITH DC AL. NO.07/2008.DT.31-01-08.IN FINISHED CONDITION C Estab
3) STEEL CONTAINER FOR TU 1111 IN FC Description :STEEL CONTAINER FOR TU 1111 IN FC() Specification : DRG NO. ARM 1519 C Estab
Category : dp
Grade : 3
Size : S
132 VEEKAY ENTERPRISES
312, CENTER SQUARE, S.V. ROAD, ANDHERI (W), MUMBAI, MAHARASHTRA
PIN1 : 400058
Phone No. : 022-261372414 FAX: 022-26237710
GSTIN : 26AAAFV5724E2ZB 		MUMV08384F

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) SLIPPING RING F1301-152220-B (6770430100)() SLIPPING RING TO DRG.NO. F1301-152220-B DC NO. 36730-A DTD. 15/1/01 SPECN: F1301-924320-D (CQA-4919) DC NO. 36730-A DTD. 15/01/01 C Nonestab
2) CARRIER 12A ISV-470A ASY B TPT (6573800100)() CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG.PT.NO. ISV-470-A DC 3699-A DT. 2/02/05 WITH SHOCK ABSORBER ASSEMBLY B DRG.PT.NO. ISV-147-SA DC-35855-A DT. 23/11/94 SPECN: CQA(A)2804 (m) DC-36202-A DT. 7/11/96 C Estab
3) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)() CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 7/01/91 C Nonestab
4) SEALING RING FOR HEAT-551 (9911357874)() DRG.NO. TRD-1-2-2246 C Nonestab
Category : P
Grade : III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER WITH DISC FOR MORTAR BOMB 81 mm ILLG.() CQA(A) 2303 C Estab
2) CELLULOID STRIP 50 x 70 mm FOR MORTAR BOMB 51 mm ILLG.() JSS 1375-03 : 2004 C Estab
3) CYLINDER POLYTHENE FOR FOG SIGNAL() OFDR/CARTG-84/R-3/A3 C Estab
4) CELLULOID STRIP 50 Sq. mm FOR MORTAR BOMB 51 mm SMOKE() JSS 1375-03 : 2004 C Estab
5) AMMUNITION CONTAINER 75A ( ASSY) FOR FLARE TRIP WIRE() CQA/AMN/3259 C Estab
6) AMMN. CONTAINER PLASTIC 47B FOR FUZE 213 P MK 5 (M2,M3,& M4)() CIA/AMN/2483 C Estab
7) AMMN. CONTAINER 69A/L FOR MORTAR BOMB 51 mm SMOKE / ILLG.() ARDE 2125 C Estab
8) LINER PRIMARY CHARGE(POLYSTER SHEET G C Q)() JSS 9330-03 : 1995 C Estab
9) CARRIER AMMN. 17A FOR MORTAR BOMB 81 mm ILLG. 2A() ARDE 2224 C Estab
10) GRUMET ASSEMBLY FOR SHELL 155mm ILLG.M1A1() 04-13-2452-148 C Estab
11) PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.() DRG. NO. OFDR/PACKING/84MM/74 C Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300004 TEFLON SHT[64]() Specification : HEMRL /ED/PS/286 R Nonestab
2) 6432300006 TEFLON SHT[64]() Specification : HEMRL/PS/286 R Nonestab
3) 6432300005 TEFLON SHT[64]() Specification : HEMRL/PS/286 R Nonestab
4) 6432300007 TEFLON SHT FILM[64]() Specification : HEMRL/PS/286. R Nonestab
5) 6432300003 TEFLON SHT ERA PANEL[64]() Specification : HEMRL/ED/PS/286, R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103218068 EXPANDED POLY FOAM 1000X 500X 10MM[21]() Specification : IS: 4671 - 1984 (FIRST REVISION) R.A-1999 SIZE: 1000 MM X 500 MM X 10 MM THICK. R Nonestab
2) 2103789155 POLYTHENE LAY FLAT 200 X 0.076 MM.[21]() Specification : JSS 9330-03:2007 REVISION NO 2 R Nonestab
3) 6576763204 CONTAINER 67A (PLASTIC)W/O DISC[65]() Specification : SPECN.CQA(A) 2804(M) C Nonestab
4) 2029955695 CELLD SLEEVES CONST 3 120MM ARJUN[20]() Specification : JSS 1375-03:1998. R Estab
5) 6572129008 DISC CROSS LINKED CONT 38B[65]() Specification : DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B. R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TWIN CONTAINER 520 9 DRG TRD 422155 LF 9911357801 Description : TWIN CONTAINER 520 9 DRG TRD 422155 LF 9911357801() Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TWIN CONTAINER ROUND PARTNO 1185633 LF 9911358474 Description : TWIN CONTAINER ROUND PARTNO 1185633 LF 9911358474() Specification : TWIN CONTAINER/ROUND PART NO.1185633 TO OEM DRG.NO.2031324. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) OBTURATOR() DESIGNER REF.NO.155-1140, DC NO.37025-A, DT.08.08.2005. C Not Estab.
2) SCUFF PROTECTOR () DRG.NO:155-1110 DC NO.37025-A, DT.08.08.05. C Not Estab.
3) GRUMMET ASSEMBLY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT () DESIGNERS REF.NO:04-13-2452-148.(REF.OFBL DRG.NO:BL/PB/U-5/343). C Not Estab.
4) CUP () DRG.NO.ARDE 2043 DET.NO.5 PART NO.ISV-1764 DC NO.36356-A, SPECN. NO.CQA (A) 2804(m) DC NO.36202-A. C Not Estab.
5) PLUG FUZE HOLE 50.8 MM 2A PLASTIC () ISX-315 DESIGNERS REF NO.CIA/AMN/2171 DC NO.37347-A DT.29.10.13. C Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476 Description : TWIN CONTAINER 520 9 PART 1202503 LF 9911358476() Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478 Description : 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478() Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502. R Nonestab
Category : p
Grade : 3
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORE GRIP MOULDING FOR TEAR GAS GUN() DRG No- TGG-601 C Nonestab
2) MAGAZINE ROUND FOR 5.56 INSAS RIFLE[70]() Specification : MAGAZINE ROUND TO DS CAT NO1005-007783(LATEST DC-24744-SA DT.12-06-2000)FOR 5.56MM RIFLE CONSIST OF DS CAT 1005-007856(2)1005-007857(3) 5340-015712 (4)1005-007855 (5)5360-007117 SPECN.ARDE/SPECN/535(PROV).(WITHOUT VAPOCURE COATING). (EXCE C Nonestab
3) GUARD HAND ASSY.(DARK BLUE GRAY) FOR RIFLE 5.56MM INSAS[70]() Specification : GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA) 2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) & 4) 5305-077989 (WITH S.S.REFLECTOR). ARDE SPECN.ARDE/SPECN/53 C Nonestab
4) MOTHER BOX FOR PACKING OF 05 NOS. OF SINGLE WEAPON PACKING OF TEAR GAS GUN() RFI SK-9118-GG C Nonestab
5) BUTT PLASTIC (SOLID) FOR CQB CARBINE() RFI SK-10294 , MATERIAL- NYLON 6 C Nonestab
6) CONNECTOR BUTT ASSY FOR 12 BORE PUMP ACTION GUN() RFI SK No-10016-G C Nonestab
7) CPP HOLLOW CORRUGATED BOX FOR 0.22" REVOLVER & 0.32" PISTOL() RFI SK-7239* C Nonestab
8) STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]() Specification : STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH] C Nonestab
9) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 FOR RIFLE 5.56MM INSAS[70]() Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TO ARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA) C Nonestab
10) BUTT FOR TEAR GAS GUN() DRG No-TGG-401 C Nonestab
11) BUTT (PLASTIC) (DARK BLUE) FOR RIFLE 5.56MM INSAS.[70]() Specification : BUTT(PLASTIC),(D/BLUE) TO DS CAT NO.1005-560838(DC-26635-S) SPECN.NO.ARDE/SPECN/536(PROV). FOR RIFLE 5.56MM INSAS. C Nonestab
12) GUARD HAND ASSY. (UPPER) (STEEL STRIP) FOR RIFLE 5.56MM INSAS.[70]() Specification : GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:- 1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) & 3)5320-022259(DC-26504-SA),(2-NOS.) FOR RIFLE 5.56MM INSAS. C Nonestab
13) FIXED BUTT SUB ASSY FOR 7.62MM ASSAULT RIFLE GHAATAK() DRG No- SK-AR-12-SA-RFI C Nonestab
14) CPP HOLLOW CORRUGATED BOX FOR 30-06, 0.22”,0.315” SPORTING RIFLE() RFI SK No-6341*4 C Nonestab
15) CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE)[70]() Specification : CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG. C Nonestab
16) BUTT PLASTIC (SOLID) WITH SINGLE MOULDED PLASTIC PIECE FOR RIFLE 5.56 MM EXCALIBUR.[70]() Specification : BUTT PLASTIC (SOLID) WITH SINGLE MOULDED PLASTIC PIECE AS PER DRG. NO. RFI/SK NO. 9154 FOR RIFLE 5.56 MM EXCALIBUR. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Twin Container Assy (without lable) to DRG No IRCL-494 for sub calibre adaptor 219.9 mm to dc(I) no. 18834-w DT. 20-12-03[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM() Specification : AFK DRG.NO. KF/SK-1809 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM Description : 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM() Specification : SPECN. NO. JSS 9330- 03 C Estab
2) 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER. Description : 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.() Specification : SPECN. IA 1285(B C Estab
3) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A Description : 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A() Specification : SPECN.NO. CQA(A) 2804 C Estab
4) 2029955695 CELLD SLEEVES CONST 3 120MM ARJUN Description : 2029955695 CELLD SLEEVES CONST 3 120MM ARJUN() Specification : JSS 1375-03:1998. C Estab
5) 6572129007 CONT.38B (PLASTIC) Description : 6572129007 CONT.38B (PLASTIC)() Specification : CONT.38B, CONSISTING 1.BODY 2.LID .3.RING-A. 4.DISC 5.DISC 6.SLEEVE. C Estab
6) 6572129006 CONTAINER 38 B WITHOUT FITMENTS Description : 6572129006 CONTAINER 38 B WITHOUT FITMENTS() Specification : CQA(A) 2804(M) C Estab
7) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117 Description : 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117() Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL. C Estab
8) 6576763204 CONTAINER 67A (PLASTIC)W/O DISC Description : 6576763204 CONTAINER 67A (PLASTIC)W/O DISC() Specification : SPECN.CQA(A) 2804(M) C Estab
9) 6572129009 DISC CLPE 3MM DRG 1853 CONT 38B Description : 6572129009 DISC CLPE 3MM DRG 1853 CONT 38B() Specification : DISC CROSS LINKED POLYETHELENE FOAM, 46.5 MM DIA.X 3 MM THICK, DES.REF.CQA(A)/AMN/3042,DETAIL NO 3,PT.NO.ISV 2018 FOR CONTAINER 38 B. C Estab
10) 6572129008 DISC CROSS LINKED CONT 38B Description : 6572129008 DISC CROSS LINKED CONT 38B() Specification : DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B. C Estab
11) 6576700001 DISC POLYFOAM ISV 1809 CONT 67A Description : 6576700001 DISC POLYFOAM ISV 1809 CONT 67A() Specification : DISC (TOP & BOTTOM) PART NO.ISV 1809 C Estab
12) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB Description : 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Estab
13) 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC Description : 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC() Specification : JSS 9330-01. C Estab
14) 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC Description : 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC() Specification : HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A C Estab
15) 6070751183 LINER CELLULOID IQX848 FOR PRI 19B Description : 6070751183 LINER CELLULOID IQX848 FOR PRI 19B() Specification : LINER,MATL:CELLULOID TO DRAWING NUMBER IQX-848,DC 36785-A DATED 08/10/2001 FOR PRIMER 19B. C Estab
16) 6490501002 PLUG FUZE HOLE 50.8MM 2A (PLASTIC) Description : 6490501002 PLUG FUZE HOLE 50.8MM 2A (PLASTIC)() Specification : PLUG FUZE HOLE 50.8 MM 2A (PLASTIC) C Estab
17) 1001615430 POLY GRANULES BLACK IS 3395 1997 Description : 1001615430 POLY GRANULES BLACK IS 3395 1997() Specification : IS:3395-1997 C Estab
18) 2103780015 POLYTHENE LAY FLAT Description : 2103780015 POLYTHENE LAY FLAT() Specification : JSS 9330-03:2007 C Estab
19) 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP Description : 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP() Specification : NYLON RING TO DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50 DC- 36257-A. DT.14-3-97. C Estab
20) 6330600190 RING SEALING DRG.3-016919 DET-52 Description : 6330600190 RING SEALING DRG.3-016919 DET-52() Specification : SPECN.JSS 4720-02 C Estab
21) 6070750330 SLEEVE IQX 849 ARDE 1807 PRI 19A&B Description : 6070750330 SLEEVE IQX 849 ARDE 1807 PRI 19A&B() Specification : SLEEVE, MAT.:CELLULOID TO DRAWING PART NO.IQX-849,DC 36681-A DTD.29-05-2000 FOR PRIMER 19B C Estab
22) 6070648998 SLEEVE MAG IQX 831FOR PRIMER 18 A Description : 6070648998 SLEEVE MAG IQX 831FOR PRIMER 18 A() Specification : SLEEVE MAGAZINE FOR PRIMER 18A. C Estab
23) 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15 Description : 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15() Specification : SLEEVE, PART NO. 2-17 DRG.NO.3-024045, 3B15, DC 36767-A, MATL: TYPE NYLON-66 TO SPECN. DEF STAN 93-8/1 (LATEST ISSUE) WITH ELECTRICAL PROPERTIES & IMPACT STRENGTH AS PER GOST.10589-73 C Estab
24) 6473200484 SPACER (MODIFIED) FOR 155MM ERFB BB Description : 6473200484 SPACER (MODIFIED) FOR 155MM ERFB BB() Specification : SPACER FOR 155 MM ERFB (BB) DES.REF. 02676-20003A203 DC NO.37128-A DT.03/08/2007 C Estab
25) 2199641002 WASHER A B FOR CONTAINER 39A Description : 2199641002 WASHER A B FOR CONTAINER 39A() Specification : JSS 9330-03-1995 C Estab
26) 6571523799 WASHER POLY ISV 1465 FOR CON 63A Description : 6571523799 WASHER POLY ISV 1465 FOR CON 63A() Specification : POLYTHENE WASHER TO DRG.PART NO. ISV 1465 DC NO. 30799-A(FOR AMMN. CONTAINER 63A) , MATL:- HDPE TYPE-ISPECN.NO. JSS 9330-03 DC NO. 3490-ME. C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) CUPS TO DRG NO ARDE 2043 DET NO 5() Specification : CQA(A) 2804 R Estab
2) HALF CUP B DRG.PT NO ISV 862,DCI-36() Specification : DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 R Estab
3) NYLON RING-DRG PT NO ITV 50() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 R Estab
4) H.CUP REF CIA/AMN/2158 PT ISV 1740() Specification : DESIGNER'S REF. NO. CIA/AMN/2158 PT. NO.ISV 1740 R Estab
5) CARRIER AMMN.NO 10C CIA/AMN/2317() Specification : CQA(A)2804 R Estab
6) AMMN CONTAINER 69 A/L PLASTIC ARDE() Specification : CQA(A)2804 R Estab
7) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804() Specification : CQA(A) 2804 R Estab
8) CONTAINER WITH DISC CIA/2303/DC(I)() Specification : CQA(A) 2303 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) CONTAINER WITH DISC CLOSING Description : CONTAINER WITH DISC CLOSING() Specification : CONTAINER WITH DISC CLOSING TO DRG. NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-A DT.09-03-2001, SHEET-2 DC-35684-A DT.06-04-94 TO SPECN. CQA(A) 2303(f) C Estab
2) BOX 7A (PLASTIC) Description : BOX 7A (PLASTIC)() Specification : BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431), DC NO. 35596A DT.01.10.93. C Estab
3) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A Description : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A() Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A, DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI C Estab
4) POLYTHENE BAG TO DRG.CIA/AMN/2185 Description : POLYTHENE BAG TO DRG.CIA/AMN/2185() Specification : POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10, PART NO.ISV-1627, DC NO.36832-A, DT.10.05.02. MATERIAL LOW DENSITY POLYETHYLENE TYPE-1 TO SPECN: JSS-9330-03:2014 REV-3 DC NO.5292 ME, DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK. C Estab
5) CONTAINER TO ARDE-1933, DET-4,PT.NO. Description : CONTAINER TO ARDE-1933, DET-4,PT.NO.() Specification : CONTAINER TO ARDE-1933, DET-4, PT.NO. ITV 170, DC NO.36207-A, DT.02-12-96 SPECN. CQA(A)-2322(r) DC 37329-A. C Estab
6) SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART Description : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART() Specification : SLEEVE MAGAZINE TO DRG.NO. ARDE-2028 PART NO.IQX-831, DC NO.36785, DT.08.10.2001 [FOR PRIMER 18A] C Estab
Category : p
Grade : 3
Size : S
133 R. S. Enterprises
26, Industrial Area Richhai Jabalpur Madhya Pradesh
PIN1 : 482010
Phone No. : 0761 6543437
GSTIN : 23ACIPA1107G1ZH 		JBPS05330D

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) Hinge H1() As per GCF Requirements Drg. No. ISV - 2093 C Not Estab
2) B1 Bracket() As per GCF Specification/Drg./Size/Specn C Not Estab
3) B2 Bracket () As per GCF Specification/Drg./Size/Specn C Not Estab
4) Bracket End Shell() As per GCF Specification/Drg./Size/Specn C Not Estab
5) Bottom Support Piece() As per GCF Specification/Drg./Size/Specn C Not Estab
Category : P
Grade : III
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) Name Plate 6 AL() As per Drg. & Specification C Not Established
2) Vertical Channel 6 AL() As per Drg. & Specification C Not Established
3) Top Frame 13A() As per Drg. & Specification C Not Established
4) Vertical Channel 13A() As per Drg. & Specification C Not Established
5) Carrying Link C43A() As per Drg. & Specification C Not Established
6) Assy. Handle C43A() As per Drg. & Specification C Not Established
7) Plate Engaging H2A() As per Drg. & Specification C Not Established
8) Handle H2A() As per Drg. & Specification C Not Established
9) Catch H2A() As per Drg. & Specification C Not Established
10) Catch H5A() As per Drg. & Specification C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOX B 184[65]() Specification : DRG. NO. IA-646 PT. NO. ISV 91A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARRIER AMMN 16A (STEEL)[62]() Specification : DRG NO ARDE 2224 SHEET NO. 2 PT NO ISV 550A SPECN NO IA 1169 (n) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX B 184 MK 1 W O SEPARATOR[65]() Specification : IA 1169 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX H2A DRG CIA AMMN 468[65]() Specification : IA 1169 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARRIER 6A/L,STEEL,TO DESIGNER'S REF CIA/AMN/1162,PART NO.ISV 354-A,SPECN IA 1169 DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC:220[65]() Specification : IA 1169 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMUNITION CONTAINER BOX B-9 A STEEL TO DESIGNER REF ARDE 2174 PT. NO. ISV 553A SPECN. IA 1169() IA 1169 C Not Estab.
Category : P
Grade : III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) AMMN.CONTAINER BOX C-44A(STEEL)() DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO:220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012. C Not Estab
2) AMMN.CONTAINER BOX C-44A(STEEL)() DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO:220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012. C Not Estab
Category : P
Grade : II
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) CARRIER 7A/L() IA 1169(n) DC No. 35576-A DT 08.09.93 E NOT ESTAB.
Category : P
Grade : III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MANUFACTURING OF COPPER BODY ITEM[96]() Specification : DRG NO NAD7516 SHEET NO.7 OF 10 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MANUFACTURING OF COPPER BODY ITEM[96]() Specification : DRG NO NAD7516 SHEET NO.7 OF 10 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) Handle with Handle Clip for Box C-53A[99]() Specification : DRG, NO.OFB/C/1564 E Estab
2) CARRYING LINK[99]() Specification : DRG.NO OFB/C/1540 E Estab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION E Estab
5) BOTTOM CORNER PIECE FOR BOX C-53[99]() Specification : AS PER O.F.BHUSAWAL DRAWING E Estab
6) TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
7) HINGE - AS PER DRG. NO. OFB/C/1565[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
8) Hinge[99]() Specification : Drg.No. OFB/C/1410-A E Nonestab
9) ENGAGING PLATE FOR BOXH2A[99]() Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718. E Estab
10) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
11) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
12) CHANNEL - FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Nonestab
13) LID CORNER PIECE FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
14) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
15) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]() Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969 E Nonestab
16) PIECE PACKING `A'[99]() Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820 E Nonestab
17) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 E Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA ASSY BUMPER FRONT[90]() Specification : ASSY BUMPER FRONT C Nonestab
2) LPTA Assy Mounting Spare Wheel Carrier[90]() Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED) C Nonestab
3) LPTA ASSY TAIL LAMP BRACKET[90]() Specification : ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 26145440820 C Nonestab
4) LPTA Cross Tube[90]() Specification : Assy Cross Tube(Torsion Bar)RHD C Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BRACKET FOR AXLE LAMP[90]() Specification : AS PER COMPONENT DRG. C Nonestab
2) Drinking Water Tank Part No X4110910E for Stallion[90]() Specification : As per specification / drg. C Nonestab
3) TAIL PIPE SUPPORT[90]() Specification : TAIL PIPE SUPPORT, PART NO. X-7144514(#) C Nonestab
4) SUB ASSY SHOCK ABSORBER BRKT[90]() Specification : S/A SH. ABS BRKT (AD), DRG./PART NO. B-6000301 V1 C Nonestab
5) BRACKET BLACK OUT HEAD LAMP[90]() Specification : BRACKET BLACK OUT HEAD LAMP, PART NO. X-7153914-# C Nonestab
6) BRACKET ON FRAME[90]() Specification : BRACKET ON FRAME, PART NO. F-0420714 C Nonestab
7) SPACER VALVE MTG[90]() Specification : SPACER VALVE MTG (102-18), PART NO. X1200145 -VI C Nonestab
8) CAB MOUNTING BRACKET LH[90]() Specification : CAB MOUNTING BRACKET LH DRG./PART NO. X-0444510[E] C Nonestab
9) BUMPER CROSS MEMBER[90]() Specification : BUMPER CROSS MEMBER PT.NO.B8136507(B.0) C Nonestab
10) BOTTOM X MEMBER[90]() Specification : BOTTOM X MEMBER PT.NO.X4632614-C C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000) Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)() Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOX STEEL C-239[62]() Specification : DRG NO. ARDE 2148 DET NO. 6, AL.NO. 20/2008 DT.31/7/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER BOX B 9A BRUNSWICK GREEN FOR PACKING OF BOMB 51MM SMOKE[65]() Specification : DRG.NO. ARDE-2174, SHEET NO.3,PT.NO.ISV 553A DC-35907A DT.09/02/1995 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Ammn. Container Box B9A Steel (O.G.) for Packing of Bomb 51mm Illg./Red/Green[65]() Specification : DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER BOX B7B STEEL[65]() Specification : AS PER DRAWING ATTACHED C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STEPNEY MOUNTING BRACKET LH & RH[90]() Specification : STEPNEY MOUNTING BRACKET LH & RH C Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Assy 5th Cross Members BS III 715[90]() Specification : 5TH CROSS MEMBER BS-III 715 LPTA VEHICLE, PART NO. 263631208201-A1-a-V2 C Nonestab
2) LPTA Assy 6th Cross Members End X Member[90]() Specification : 6TH CROSS MEMBER (END X MEMBER) PART NO. 261431207143 DRG. NO 261431207143 (V2) F1 C Estab
3) LPTA Assy Ft Cross Member Eng Mtg Comp[90]() Specification : ASSY FRONT CROSS MEMBER ENGINE MTG. COMP. PART NO. 215431200126NRLPTA-715, BS-III VEHICLE V1 C Nonestab
4) LPTA Assy Long Members LH Reinforcement LH LPTA BS 3[90]() Specification : ASSY LONG MEMBER LH BS-III VEHICLE LPTA PT.NO. 215431107113V4 REINFORCEMENT LH PT. NO. 215431207142-A3-a.V1 BS-III LPTA VEHICLE C Nonestab
5) LPTA Assy Long Members RH Reinforcement RH LPTA BS 3[90]() Specification : ASSY LONG MEMBER RH BS-III VEHICLE LPTA PT.NO. 215431107112V3 REINFORCEMENT RH PT. NO. 215431207143- V4 BS-III LPTA VEHICLE C Nonestab
6) LPTA Assy Water Tank Insulated 55 lt[90]() Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4) C Nonestab
Category : p
Grade : Grade II
Size : S
134 METCO ENTERPRISES PVT LTD
703- B WING,SHUBHAM CENTRE NO-2 CHAKALA MUMBAI-400099 CHAKALA ROAD CHAKALA Maharashtra
PIN1 : 400099
Phone No. : 28356437
GSTIN : 27AABCM5237H1ZI 		MUMM12286B

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) SULPHURIC ACID Minimum 98 present Strength[10]() Specification : SULPHURIC ACID (TECHNICAL GRADE)(MINIMUM 98 % STRENGTH) AS PER IS :266:1993( REAFFIRMED -2020) R Nonestab
Category :
Grade : Grade III
Size : M
135 A.T. Industries
8068, Bara Hind Rao, Delhi Delhi
PIN1 : 110006
Phone No. : 9810111372
GSTIN : 07AAAPF5094P1ZD 		DELF02096D

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) ALUMINIUM FRAME COMPLETE PURE EPOXY POWDER COATED BLACK TO MINIMUM 50 MICRON (.05MM) FITTED WITH STRAPS RETAINERS(EYE)() PROV.IND/TC/1550 (7202/PK DT.21.09.13) R
2) BRASS HOOKS FOR HIGH ANKLE BOOT DVS() IS:5041-1978 & OEFC DRG NO. SK-1203 R
3) BUTTON PLASTIC VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
4) POLYTHENE BAG OF DIFFERENT THICKNESSES & DIMENSIONS() AS PER REQUIREMENT & SPECIFICATION R
5) POLYTHENE FILM OF DIFFERENT THICKNESSES & DIMENSIONS() AS PER REQUIREMENT & SPECIFICATION R
6) POLYTHENE BAG OF SELF SEALING TAPE OF DIFFERENT DIMENSIONS() AS PER REQUIREMENT & SPECIFICATION R
7) EYELETS ALU. ALLOY VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
8) EYELETS BRASS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
9) NICKLE COATED SNAP FASTNER(FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER IN BRONZED BLACK FINISH() IS:4741-1968 EXCEPT FOR PULL STRENGTH, WHICH SHOULD BE 4 Kgf (MIN) R
10) BUCKLES ALU. ALLOY. OR ATTACHMENTS QR OR RINGS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
11) BUCKLES BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
12) BUCKLES IRON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
13) HOOK VARIOUS OR WITH ATTACHMENTS() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : III
Size : S
136 SPM Engineering & Sales
73-A Dada Nagar Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 9415078640
GSTIN : 09AUZPS3711R1ZE 		AUZPS3711R

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) Protective Ring for Copper Band() SK-8337/A C Not Established
Category : P
Grade : III
Size : S
137 BANSAL PRECISION FORGE LTD.
34-35,JIGANI LINK ROAD INDUSTRIAL AREA, HENNAGARA(POST), ANEKAL TALUK BANGALORE KARNATAKA
PIN1 : 560105
Phone No. : 08110-417310
GSTIN : 29AACCB4154B1Z2 		BLRU00999F

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING OF TA LINK() AS PER OFM SPECIFICATION C NOT ESTAB
2) FORGING OF TA GUIDE() AS PER OFM SPECIFICATION C NOT ESTAB
3) FORGING OF TA SHOE() AS PER OFM SPECIFICATION C NOT ESTAB
4) FORGING OF TA CLAMP() AS PER OFM SPECIFICATION C NOT ESTAB
5) FORGING & ROUGH MACHINING OF 81MM MORTAR BOMB FRONT PART() AS PER OFM SPECIFICATION C NOT ESTAB
6) FORGING & ROUGH MACHINING OF 81MM MORTAR BOMB REAR PART() AS PER OFM SPECIFICATION C NOT ESTAB
7) MACHINED TA GUIDE() AS PER OFM SPECIFICATION R Established
8) MACHINED TA SHOE() AS PER OFM SPECIFICATION R Established
9) MACHINING OF FORGING OF T.A. CLAMP() AS PER OFM SPECIFICATION C Non Established
10) T.A. LINK (COMPLETE)() AS PER OFM SPECIFICATION C Non Established
Category : P
Grade : II
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING OF TA LINK[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
2) FORGING OF TA GUIDE[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
3) FORGING OF TA SHOE[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
4) FORGING OF TA CLAMP[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
5) FORGING & ROUGH MACHINING OF 81MM MORTAR BOMB FRONT PART[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
6) FORGING & ROUGH MACHINING OF 81MM MORTAR BOMB REAR PART[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
7) MACHINED TA GUIDE[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
8) MACHINED TA SHOE[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
9) T.A. LINK (COMPLETE)[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
10) MACHINING OF FORGING OF T.A. CLAMP[61]() Specification : AS PER OFM SPECIFICATION R Nonestab
11) FORGING FOR TRACK LINK 6120100104[61]() Specification : AS PER OFM C Estab
12) TRACK LINK DRG NO 172 55 012 6120100128[61]() Specification : AS PER OFM C Estab
13) FORGING FOR GUIDE 6120100103[61]() Specification : AS PER OFM C Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Kanpur
Name Specification Use Status
1) FORGING FINISH CAVITY FOR SHELL 130 MM HE() AS PER OFC DRG. NO. SK-9747/A C NOT ESTAB.
Category : P
Grade : II
Size : M
138 Vinir Engineering Pvt Ltd
No 102-104, Bommasandra Industrial Area Bengaluru KARNATAKA
PIN1 : 560099
Phone No. : 080 27832313 		BLRV00374O

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Exhaust Camshaft Forging() 307-21-1A C Not Estab
2) Inlet Camshaft Forging() 307-06-4A C Not Estab
3) Flywheel Forging() 20-05-65-6 C Not Estab
4) First Bearing body (Fully finished)() 20-01-93-9 E Not Estab
5) Flywheel Forging (Upto Opn No.20)() 20-05-65-6 C Not Estab
6) Forked Con.rod forging (upto opn no.100)() 20-04-12-3 C Not Estab
7) Master Con.rod forging (upto opn no.110)() 304-12-7 C Not Estab
8) Forked Con.rod forging (upto opn no.100)() 20-04-15-4 C Not Estab
9) Articulated Con.rod cap forging (upto opn no.110)() 20-04-22-4 C Not Estab
10) Cap of Master Con.rod forging (upto opn no.130)() 304-15-2 C Not Estab
11) Cylinder liner forging() 303-07-22 C Not Estab
12) Cap and Main bearing forging() 20-06-40 & 20-06-41 C Not Estab
13) Conversion of ESR steel billets into UTD-20 Crankshaft() 20-05-06-4 R Not Estab
14) Flywheel (Upto Opn No.70)() 20-05-65-6 C Established
15) Master Connecting rod Upto Opn-110() 304-12-7 C Established
16) Crank shaft Forging() 3305-06-15 C Non Established
17) Common Blank for Bearing Forging() 20-01-41 & 44-7 & 133-2 C Established
Category : DP
Grade : II
Size : M
139 Ess Kay International
F-12, BAJRANGBALI IND. AREA PANKI SITE-4 KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 9935506222 		AERPC2249E

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) CORD NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
2) CORD ELASTIC RING OR LOOP VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
3) LACES NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
4) COTTON KNITTED FABRIC 2/2 RIB KNIT WHITE BLEACHED 46 +_ 1 CMS. WIDE - UNPRROFED() AS PER REQUIREMENT & SPECIFICATION R
5) COTTON KNITTED FABRIC PLAIN RIB KNIT WHITE BLEACHED TUBULAR FORM 46+_1 CMS. UNPROOFED() AS PER REQUIREMENT & SPECIFICATION R
Category : DDP,DP
Grade : I,II
Size : S
140 QUALITY SCIENTIFIC & MECHANICAL WORKS
84 HSIDC AMBALA CANTTP Industrial Ambala Cantt Haryana
PIN1 : 133001
Phone No. : 2699777 		RTKM02986E

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Autoclaved Prism() AS PER RELEVANT SUPPLY ORDER R Not Estab.
2) Non Autoclaved Prism() AS PER RELEVANT SUPPLY ORDER R Not Estab.
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) LAMP WANDERING 1A AS PER DRG. NO.MCT-3212. () As per required Specification C Not Estab.
Category : DDP,DP
Grade : I,II
Size : S