List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
161 Entremonde Polyecoaters Ltd.
Kilfire House, 1st Floor, C-17, Dalia Industrial Area, New Link Road, Andheri (W), Mumbai Maharashtra
PIN1 : 400053
Phone No. : 022-26732563, 022-26732564, 0253-2350143, 0253-2350634, 02553-225221
GSTIN : 27AAACE0944L1ZM 		MUMEO6514E

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) BOTH SIDE PVC COATED NYLON FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS() AS PER REQUIREMENT & SPECIFICATION R
2) BOTH SIDE PVC COATED NYLON FABRIC LIGHT GREEN (SHADE NO. 218 OF IS:5) WIDTH 100 CMS() AS PER REQUIREMENT & SPECIFICATION R
3) BOTH SIDE PVC COATED NYLON FABRIC OLIVE GREEN (SHADE NO. 220 OF IS:5) WIDTH 100 CMS() AS PER REQUIREMENT & SPECIFICATION R
4) BOTH SIDE PVC COATED NYLON FABRIC SAND COLOUR (SHADE NO.388 OF IS:5) WIDTH 100 CMS() AS PER REQUIREMENT & SPECIFICATION R
5) BOTH SIDE PVC COATED NYLON FABRIC WITH F.R. TREATMENT 135 CM WIDE() AS PER REQUIREMENT & SPECIFICATION R
6) BOTH SIDE PVC COATED POLYESTER FABRIC DARK BROWN (SHADE NO. 412 OF IS:5) WIDTH 100 CMS() AS PER REQUIREMENT & SPECIFICATION R
7) BOTH SIDE PVC COATED POLYESTER FABRIC WHITE WIDTH 100 CMS() AS PER REQUIREMENT & SPECIFICATION R
8) FABRIC NYLON 250 GMS. BLACK PU COATED 135/136 CMS.() IND/TC/0155 R
9) FABRIC NYLON 250 GMS DISRUPTIVE BSF PATTERN P.U.COATED 135/136 CMS.() AS PER REQUIREMENT & SPECIFICATION R
10) FABRIC NYLON 250 GRMS. DISRUPTIVE POLYURETHENE COATED 135/136 CMS.() IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/- R
11) FABRIC NYLON 250 GSM POLYURATHENE COATED DISRUPTIVE 91 CMS.() VARIETY NO. 2 OF DMSRDE/T&GS/89/377 (b) R
12) FABRIC NYLON 250 GSM DISRUPTIVE PATTERN P.U. COATED 140/142 CMS. WIDE() IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH R
13) FABRIC NYLON 48 GMS OG P.U.COATED 122 CM. WIDTH() MASS/M2-48+-2 GMS., B.S.- 65KGS, WRAP-55KGS, WEFT-PLAIN,THICKNESS-0.08 R
14) FABRIC NYLON 60 GRAM P.U. COATED O.G. 135 CM. WIDE() AS PER REQUIREMENT & SPECIFICATION R
15) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE() SCH. NO. DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R
16) FABRIC NYLON P.U.COATED 250GMS OG 100 CM WIDTH() AS PER REQUIREMENT & SPECIFICATION R
17) FABRIC PP TPO COATED WITH F.R. TREATED FOR FLOORING 115 CM WIDE() AS PER REQUIREMENT & SPECIFICATION R
18) GROUND SHEET TPO O.G.() IND/TC/2328(b) R
19) NYLON FABRIC O.G.PVC COATED 420 GMS/SQ METER 91 CMS.() TSRDE/72/117 R
20) NYLON FABRIC 395 GSM WP DISRUPTIVE PATTERN WITH ARMY LOGO 172 CM. WIDE() AS PER REQUIREMENT & SPECIFICATION R
21) FABRIC NYLON FC/FR TREATED 95 GMS. OG 120 CM WIDE() DMSRDE/T & GS/97/415/tex-4/1(b) R
22) FABRIC NYLON FC/FR TREATED 95 GMS. OG 100 CM. WIDE() DMSRDE/T & GS/97/415/TEX -4/1(B) R
23) FABRIC NYLON P.U.COATED 250GMS OG 100CM WIDTH() AS PER REQUIREMENT & SPECIFICATION R
24) FABRIC NYLON PU COATED BREATHEABLE WATERPROOF FABRIC 76 GRMS.TYPE-I 122 CMS.WIDE() AS PER REQUIREMENT & SPECIFICATION R
25) FABRIC NYLON PVC COATED OG FLAME RETARDANT 135 CM. WIDE() DMSRDE/T&GS/83/306-EXCEPT THAT R
26) NYLON FABRIC 250 GMS PU COATED 120 CM. OG() PROV. SPECN. NO. DMSRDE/T&GS/89/377© WITH FOLLOWING ADDITIONAL R
27) TENT FLOORING FOR TEFS 4M OF SIZE 4.05 MTR. X 4.66 MTR.() AS PER REQUIREMENT & SPECIFICATION R
28) TENT FLOORING OF TENT ARCTIC MEDIUM OF DIAMETRE 4.96 MTR. (CIRCULAR)() AS PER REQUIREMENT & SPECIFICATION R
29) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
30) FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTERN 180 + 2 CM (NO NEG() CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX "A" & AS IN TE R Established
31) BREATHABLE RAIN COAT NYLON FABRIC NAVY BLUE 100 CMS. (MIN), 135 + - 10 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
32) DRILL COTTON PROOFED WHITE (BLEACHED) 71 CMS.() IND/TC/097 (C) R Non Established
33) FABRIC NYLON 300 GSM RIPSTOP PU COATED F.R. 152 CMS WIDE (TOLERANCE + 2 CMS AND NO NEGATIVE TOLERANCE)() AS PER SPECN. NO. IND/TC/0155 AND AS PER ANNEXURE - "A" ATTACHED TO SPECN. NO. S/2532/BAG KIT UNIVERSAL (OG)/TC-6(A) R Non Established
Category : P
Grade : II
Size : M
162 AUTO INTERNATIONAL
VILL. MANGARH, KOHARA MACHHIWARA ROAD LUDHIANA Punjab
PIN1 : 141112
Phone No. : 2848874
GSTIN : 03AAGFA2950D1Z3 		JLDA00027G

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT " C Nonestab
2) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
Category : ddp
Grade : 3
Size : M
163 CASTIPLAST PRIVATE LIMITED
21/B KAZI PARA ROAD BEHALA KOLKATA West Bengal
PIN1 : 700060
Phone No. : 24079831
GSTIN : 19AABCC2944D1ZX 		CALC06049B

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) BASE PLATE 8 5 mm for HE ILLG LF 6170444690[61]() Specification : BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVO C Estab
2) BASE PLATE 7 8 MM FOR TPT HEAT Lf 6170444700[61]() Specification : BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AV C Estab
3) CAP AND BOTTOM SPECN: F1301-905060-P (9911350158)[99]() Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91. C Estab
4) BASE PLATE TO DRG NO 6436977 lf 9911357862[99]() Specification : BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041. C Nonestab
5) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)[20]() Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BASE PLATE 8 5MM PART NO 404028661 LF 9911358414 Description : BASE PLATE 8 5MM PART NO 404028661 LF 9911358414() Specification : BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527 R Nonestab
Category : ddp
Grade : 3
Size : S
164 M/S PLANSEE METAL GMBH.,
PLANSEE STREET, 7L. REUTTEL, AUSTRIA. AUSTRIA
PIN1 : 435662
Phone No. : 004356726000 		NANANANANA

Download 		1) Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) MOLYBDENUM BATT.[ASTM B387]() ASTM B387 C Estab.
Category : P
Grade : I
Size : L
165 KRISHNA INDUSTRIES
MPB 53, MAHAVEER NAGAR FIRST, KOTA, RAJASTHAN
PIN1 : 324005
Phone No. : 0744-2490112 FAX: 0744-2490112
GSTIN : 08ADKPD7121Q1Z7 		ADKPD7121Q

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) PIEZO ELECTRIC GENERATOR ASSY (9911357853)() PIEZO ELECTRIC GENERATOR ASSY TO DRG. NO.TRD 2-2-2203 C NOT ESTABLISHED
2) BASE PLATE 8.5 MM FOR HE/ILLG. (6170444690)() BASE PLATE TO DRG.NO. F-1301-015081-L DC 36862-A DATE 23/08/2005 SPECN: F-1301-902040-K (b) (CIA-0308) DC 36766-A DT. 14/07/2001 C NOT ESTABLISHED
3) DIAPHRAGM TO DRG.NO.TRD-2-2-2244 (9911357863)() DRG.NO. TRD-2-2-2244 C NOT ESTABLISHED
4) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)() DRG.NO. TRD-2-2-2271 C NOT ESTABLISHED
5) SLIPPING RING F1301-152220-B (6770430100)() SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD.15/01/01 SPECN:- F1301-924320-D (CQA-4919) DC NO-36730-A DTD.15/01/01 C NOT ESTABLISHED
6) SET 14 ITEMS WITH PERFORATED DISC (9911356669)() AS PER SPECIFIED DRG./SPECN. C NOT ESTABLISHED
7) ADOPTER BUSH FOR 81MM SMOKE GRENADE (9911358269)() ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 DTD. 20/12/94 C NOT ESTABLISHED
8) BANGALORE TORPEDO SECT 38MM 2M EMPT (6430200100)() BANGALORE TORPEDO SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC (I) -35128-A DT 4/7/91 C NOT ESTABLISHED
9) SPRING 5209544 FOR HEAT-551 (9911357927)() DRG.NO. 301100269 C NOT ESTABLISHED
10) AFT CLOSURE INSULATOR (HEAT-551) (9911357864)() DRG.NO. TRD-2-2-2243 C NOT ESTABLISHED
11) PLUNGER BLANK FOR HEAT-551 (9911357919)() DRG.NO. 6417 888/DRG.NO. TRD-1-2-2293 C NOT ESTABLISHED
12) SUB ASSY OF DETONATOR DISC (9911358194) () SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0 C Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BLANK FOR AFT CLOSURE 751 LF 9911358748 Description : BLANK FOR AFT CLOSURE 751 LF 9911358748() Specification : BLANK FOR AFT CLOSURE 751 TO SPEC NO 00814599 MATERIAL EN-AW 7075 TO DRG NO.304200410 TO PART NO.4103408 R Nonestab
2) BLANK FOR PLUNGER FOR 751 LF 9911358749 Description : BLANK FOR PLUNGER FOR 751 LF 9911358749() Specification : BLANK FOR PLUNGER FOR 751 TO SPEC NO. 00814596 MATERIAL EN-AW 7075 TO DRG NO. 304101470 TO PART NO 06417888 R Nonestab
3) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750() Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SET OF 4 SPRINGS FOR HEAT 551 lf 9911358158[99]() Specification : SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CABLE LUG TO OFAJ DRG NO FS 2799 B Description : CABLE LUG TO OFAJ DRG NO FS 2799 B() Specification : CABLE LUG TO OFAJ DRG NO FS 2799 B C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOOSTER CUP and PIN FOR 84MM HEAT 551 LF 9911358084[99]() Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ). C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) MANTLE PART NO 5211891 LF 9911358398 Description : MANTLE PART NO 5211891 LF 9911358398() Specification : MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297[99]() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 C Nonestab
2) CIRCULAR BRASS LABEL FOR 1000 LBS BM LF 9911358723[99]() Specification : CIRCULAR BRASS LABEL FOR 1000 LBS BOMBS DRG.NO.-KHS-2-1-0359. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918[99]() Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]() Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0 C Nonestab
2) 7th set of 3 items for MMHG 9911358531[99]() Specification : 7th set of 3 items for MMHG consists of Following items- 1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0 2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1 3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PARTITION TRD 1-2-2279 (84MM 551)[99]() Specification : PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) WAVE SPRING WASHER 2013999902[99]() Specification : WAVE SPRING WASHER PART NO 6414691 TO OEM DRG NO 304069069/TRD DRG NO 2.2.2541 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CAP II-I TO OFAJ DRG NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT 08.11.10[00]() Specification : CAP II-I TO OFAJ DRG NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT 08.11.10 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) WASHER TO CQA(A) DRG NO. BW9.440.047 DC 37271-A[00]() Specification : WASHER TO CQA(A) DRG NO. BW9.440.047 DC 37271-A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CAP TO CQA(AMMN) DRG NO. BW8.635.063 DC 37271-A[00]() Specification : CAP TO CQA(AMMN) DRG NO. BW8.635.063 DC 37271-A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CAP I-1 TO OFAJ DRG NO. FS-2497B[00]() Specification : CAP I-1 TO OFAJ DRG NO. FS-2497B C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) LITTLE CUP TO CQA(A) DRG NO. BW8.635.064 DC 37271-A[00]() Specification : LITTLE CUP TO CQA(A) DRG NO. BW8.635.064 DC 37271-A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) DELAY TRAIN TO OFAJ DRG NO. FS-2496B[00]() Specification : DELAY TRAIN TO OFAJ DRG NO. FS-2496B C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) MEMBRANE TO CQA(A) DRAWING NO. BW 8.363.012 DC 37271-A[00]() Specification : MEMBRANE TO CQA(A) DRAWING NO. BW 8.363.012 DC 37271-A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CUP TO OFAJ DRG NO. FS-2457A[00]() Specification : CUP TO OFAJ DRG NO. FS-2457A C Estab
Category : p
Grade : Grade III
Size : S
166 RHT Fashions
61, Kennedy Avenue, Amritsar, Punjab
PIN1 : 143001
Phone No. : 8968507786
GSTIN : 03ATGPK7409J1ZO 		AMRP12506E

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) NETTING MOSQUITO VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) NETTING MOSQUITO various[21]() Specification : As per requirment & specification R Estab
2) WADDING POLYESTER HOLLOW SILCONIZED 350 GSM IN 91 CM[21]() Specification : AS PER APPENDIX "A" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 R Estab
Category : p
Grade : Grade II
Size :
167 M/S NILKAMAL LTD
NILKAMAL HOUSE, PLOT NO 77/78, STREET NO 14 MIDC, ANDHERI (EAST), MUMBAI MAHARASTRA
PIN1 : 400093
Phone No. : 022-26818888
GSTIN : 27AAACN2329N1ZA 		MUMN07184C

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PACKING BOX FOR UBGL() DRAWING NO 32Y 0001 005 D3 E ESTAB
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL E Estab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE Description : 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE() Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND SPECIFICATION NO.S-I/CM/IMMK II/ATP/01. C Nonestab
Category : p
Grade : 3
Size : L
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PISTOL GRIP FOR JVPC Description : PISTOL GRIP FOR JVPC() Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Estab
Category : ddp
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-12 (FILLED) TO DRG. NO. ODC/AFK-096-15[65]() Specification : DRG. NO. ODC/AFK-096-15 C Nonestab
2) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-60 (FILLED), TO DRG. NO. ODC/AFK-086-15[65]() Specification : DRG. NO. ODC/AFK-086-15 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) BASE CAP (BLACK) FOR PROJECTILE TO DRG. NO. AFK/PJ/SK-62/1[60]() Specification : DRG. NO. AFK/PJ/SK-62/1 C Estab
Category : p
Grade : Grade II
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARRIER AMMUNITION 10 C , DESIGNER'S REF CIA/AMN/2317 PART NO.ISV 495A,SPECN CQA(A)2804[65]() Specification : CQA(A)2804 C Estab
Category : p
Grade : Grade II
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1[60]() Specification : DRG. NO. AFK/SK-2888 C Estab
2) PLASTIC INDEX DISC-SHOT NO.BB[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Estab
Category : p
Grade : Grade II
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC POWER PISTON WITHOUT POUCH FOR 65MM /70MM12 BORE PAPER CARTRIDGES AS PER AFK DRG.NO. KF/SK-1809[21]() Specification : AFK DRG.NO. KF/SK-1809 C Estab
Category : p
Grade : Grade II
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC INDEX DISC FOR CARTG. SA 12 BORE 65/70 MM TO DRG. NO. AFK/SK-2888 DT. 17/01/2007[60]() Specification : DRG. NO. AFK/SK-2888 DT. 17/01/2007 C Estab
2) PLASTIC MOULDED ITEMS FROM 5 GRAMS TO 5.5 KILOGRAMS[60]() Specification : AS PER AHSP/ AFK SPECIFICATION C Estab
Category : p
Grade : Grade II
Size : L
1) Small Arms Factory
Name Specification Use Status
1) PACKING BOX[25]() Specification : PACKING BOX, FOR 7.62 X 51MM LMG, DRG NO.SK-6126. C Nonestab
2) MUZZLE CAP MOULDING[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 000 00AA C Nonestab
3) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]() Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA C Nonestab
4) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]() Specification : Lower Hand Guard Assembly for CQB 5 56x45 MM DRG No 1901 01 01 00 06 000 00DA C Nonestab
5) PISTOL GRIP FOR JVPC[70]() Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Packing Box for Revolver 0 32 Side Swing DRG No SK 6263 R SW[25]() Specification : Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW. C Nonestab
2) PACKING BOX FOR LMG[25]() Specification : PACKING BOX FOR 7.62 X 51MM LMG. DRG No. SK-6126 C Nonestab
3) Packing Box For LMG[25]() Specification : Packing Box for 7.62 X51mm LMG/GPMG, drawing no. SK-6126 E Nonestab
4) DEVELOPMENT MANUFACTURE AND SUPPLY OF PACKING BOX AS PER SPECIFICATION NO 7167 PACKING BOX SPEC CQB ATTACHED[70]() Specification : AS PER SPECIFICATION NO.7167/PACKING BOX/SPEC/CQB (ATTACHED) C Nonestab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) 6573020501 AMMUNITION CONTAINER NO 6717 AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3[65]() Specification : AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3 C Nonestab
2) 6012000030 BRASS CUP DRAWING NO AFK DEV 303[60]() Specification : BRASS CUP FOR CARTG SA 7.62 MM BLANK AND 0.30 ''-06 SPORTING AMMUNITION CASES AS PER DRAWING NO AFK/DEV- 303 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MAGAZINE ASSY AS PER DRG No K 7000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL E Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050[70]() Specification : POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050 C Nonestab
2) 20MM MAGAZINE ASSY TO DRG NO 10000 ST REQ FOR AMR[70]() Specification : AS PER REQ C Nonestab
3) PACKING BOX FOR 12 7mm SRCG AS PER DRG NO FC ELB000411 AND Y36314 A 00[74]() Specification : As per OFB Requirements E Nonestab
4) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]() Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310 C Nonestab
5) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]() Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR C Nonestab
6) MAGAZINE BOX ASSY[74]() Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG C Nonestab
7) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA C Nonestab
8) Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR[70]() Specification : Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR E Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]() Specification : As per Drawing E Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]() Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6584113900 CONTAINER 39A[65]() Specification : SPECN. NO. CQA(A) 2805 C Estab
2) 6580853267 CONTAINER 63A ISV 506A[65]() Specification : AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A C Estab
3) 6572129007 CONT.38B (PLASTIC)[65]() Specification : CONT.38B, CONSISTING 1.BODY 2.LID .3.RING-A. 4.DISC 5.DISC 6.SLEEVE. C Estab
4) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]() Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103780011 ANTISTATIC POLYTHENE TUBING FOR 120[21]() Specification : ANTISTATIC POLYTHENE TUBING FOR 120 MM FSAPDS & HESH AMMN. TO DRG.NO. ARDE 9759 DET. NO. 21. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6571551172 BOX B-7 A DRG. ISV -505A DC(I)34047-[65]() Specification : SPECN NO. IA 1169 C Nonestab
2) 6141156496 AMN.CONTAINER BOX D4C DRG.ISV 540A[61]() Specification : SPECN. NO. IA-1163 C Nonestab
3) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A[65]() Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006. C Nonestab
4) 6570963318 BOX C 52 A STEEL DRG NO ISV 573A[65]() Specification : AMMUNITION CONTAINER BOX C 52-A (STEEL) FOR PACKING OF 125 MM HEAT TO DRG.PT.NO.ISV-573-A DC NO.37051-A DT 05-05-2006 . C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]() Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]() Specification : SPECN.NO. CQA(A) 2804 C Nonestab
Category : dp
Grade : Grade I
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6356000009 FRP PACKAGE BOX FOR INFL MINE MK II[63]() Specification : FRP PACKAGE BOX TO ARDE DRG.NO.9707 00 03 00 01 000 00TA FORINFLUENCE MINE MK-II. C Nonestab
2) 6206500061 MINE BODY A T DRILL 1A ND EMPTY[62]() Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C ND TO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06, SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06. C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BOX 7A (PLASTIC) Description : BOX 7A (PLASTIC)() Specification : BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431), DC NO. 35596A DT.01.10.93. C Estab
2) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A Description : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A() Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN. CQA(A) 1817(t) DC NO. 37096-A, DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANT C Estab
3) FUZE ANTIREMOVAL MINE AT 2B ND EMPTY Description : FUZE ANTIREMOVAL MINE AT 2B ND EMPTY() Specification : FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO. ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT. 03.05.94 SCANNED DT. 10.10.02 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02. C Estab
4) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) Description : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)() Specification : FUZE MINE A/T 4A ND (EMPTY ASSEMBLY)TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN.NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002.[REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY)TO IQX 86A DC NO.35879-A DT.20.12.94 (2) C Estab
Category : p
Grade : 3
Size : L
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) CENTERING BAND FOR 120 MM FSAPDS MK II[99]() Specification : RAW MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF STANDARD 93-8 / MARANYL NYLON A 100 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Nonestab
Category : p
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Nonestab
2) TRIGGER GUARD MOULDING for JVPC[70]() Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC C Nonestab
3) GAS CYLINDER COVER MOULDING FOR JVPC[70]() Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB C Nonestab
4) Retainer for JVPC[70]() Specification : Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC C Nonestab
5) Hand Guard Assembly for JVPC[70]() Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw C Nonestab
6) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]() Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR C Nonestab
Category : p
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) FORE GRIP ASSEMBLY SK 6632 TE[70]() Specification : FORE GRIP ASSEMBLY SK- 6632/TE C Nonestab
2) MAGAZINE ASSEMBLY SK 6614 TE[70]() Specification : MAGAZINE ASSEMBLY SK- 6614/TE C Nonestab
3) HAND GUARD ASSEMBLY SK 6624 TE[70]() Specification : HAND GUARD ASSEMBLY SK- 6624/TE C Nonestab
4) Pistol Grip Assembly SK 6646 TE[70]() Specification : Pistol Grip Assembly SK-6646/ TE C Nonestab
5) Pistol Grip Box assembly SK 6649 TE[70]() Specification : Pistol Grip Box assembly SK- 6649/ TE C Nonestab
6) BUTT ASSEMBLY DRG No SK 6650 TE[70]() Specification : BUTT ASSEMBLY DRG No.SK-6650/TE C Nonestab
Category :
Grade : Grade III
Size : L
168 M/s UNIVERSAL ENGINEERING CORPORATION
713, SADASHIV PETH, KUMTHEKAR ROAD, SHALIMAR LODGE BLDG. PUNE MAHARASHTRA
PIN1 : 411030
Phone No. : 24371024
GSTIN : 27AABFU1769R1ZE 		PNEU00219C

Download 		1) High Explosive Factory
Name Specification Use Status
1) FILLING HOLE PLUG() CQA(A)1504-ITW-69 C NOT ESTAB
Category : P
Grade : II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) IGNITION ELEMENT FOR PRIMER M 191 A2 CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E() CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E C Non Established
2) PLUNGER GUIDE DRG NO.04-44- 79000-06112-4 E() CQA(A) SEALED DRG.NO. 04-44- 79000-06112-4 E C Non Established
3) PLUNGER DRG. NO. 04-44-79000- 06111-4 E() CQA(A) SEALED DRG.NO. 04-44-79000- 06111-4 E C Non Established
4) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05. dt. 13.09.2011() DRG.NO. AFK/SK-215-05 C Non Established
5) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922() CQA(A) 0922 C Established
6) CENTRE PIECE DES REF NO CIA/AMN/1799 DET NO. 2 PT NO ITW 64, SPECN CQA(A) 1504 () CQA(A) 1504 C Established
7) CHAMBER DESIGN REF.NO. CIA/AMMN/474/PART NO. QX 40 DC 35853 A WITH AIDE MEMORIE NO. C7/5() DRG. NO. CIA/AMMN/474 PART NO.QX 40 C Established
8) IGNITION ELEMENT (EMPTY) TO DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A() DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A C Established
9) IGNITER CASING TO CQA(A) SEALED DRG NO 04-749-130222-03.1E() CQA(A) SEALED DRG NO 04-749-130222-03.1E C Established
10) INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E() CQA[A] SEALED DRG NO 04-749-130222-02.1E C Established
11) SPACER RING TO CQA[A] SEALED DRG.NO. 04-749-130222-03.4E() CQA[A] SEALED DRG.NO. 04-749-130222-03.4E C Established
12) SLUG FOR CASE FOR 14.5 MM ATA TO AFK DRG. NO. AFK/PJ/SK-56() DRG. NO. AFK/PJ/SK-56 R Non Established
Category : P
Grade : II
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SEALS LEAD 10 MM DIA() Specification : IND/GS/783 R Estab
2) FIRING PIN TO CQA DRG 04-749-13022() Specification : CQA[A] SEALED DRG NO.04-749-130222-03.2E R Estab
3) PLUG REPRESENTING FUZE DA5A() Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285 R Estab
4) PISTON TO DRG NO ARDE 2015() Specification : ARDE 2015 DET 23 DATED 08-11-85 R Estab
5) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A R Estab
Category : p
Grade : 2
Size : S
169 INDUSTRIAL SOLUTIONS
PLOT NO 36 INDUSTRIAL AREA INDUSTRIAL AREA RICHHAI JABALPUR Madhya Pradesh
PIN1 : 482010
Phone No. : 2757049
GSTIN : 23ADDPJ6820F1ZZ 		ADDPJ6820F

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
2) CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
Category :
Grade : Grade III
Size : S
170 SHREE BABU INDUSTRIES
HOUSE NO. 1051 HANUMANTAL JABALPUR Madhya Pradesh
PIN1 : 482001
Phone No. : 2336000
GSTIN : 23AGCPJ3091Q2Z5 		AGCPJ309LQ

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
2) CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
Category :
Grade : Grade III
Size : S
171 G.M.T UDYOG
167 A, ANANDAMATH, ICHAPUR, 24 PARGANAS NORTH WEST BENGAL
PIN1 : 743144
Phone No. : 033 25408938
GSTIN : 19AJCPG0113D1Z1 		CALK08044B

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) CONTACT TO DET NO.2-12 OF DRG NO.3 024045 TO SK NO. OTF/DD/011 IN F/C DC NO.36325 A DT.26.8.97() AS PER DRG & SPECIFICATION C NOT ESTAB.
2) REAR SIGHT BASE F1303 028081D IN F/C DC NO. 19106 W DT.16.1.08() AS PER DRG & SPECIFICATION C NOT ESTAB.
3) BRACKET TO DRG NO.F 1303 028060 IN F/C D.C.I NO.19106W DT.16.1.08() AS PER DRG & SPECIFICATION C NOT ESTAB.
4) NUT TO DET NO.2-16 OF DRG NO.3 024045 GSF SK NO.OTF/DD/006 IN F/C() AS PER DRG & SPECIFICATION C NOT ESTAB.
5) NUT TO DET NO. 1-5 OF DRG NO 3 024044 GSF SK NO.OTF/PG/003 IN F/C() AS PER DRG & SPECIFICATION C NOT ESTAB.
6) CAP IN F/C TO DET NO 1-6 OF DRG NO. 3-024044 GSF SK NO OTF/PG/002 DC NO.36325 A DT.26.8.97() AS PER DRG & SPECIFICATION C NOT ESTAB.
7) CLEANING BRUSH (HARD) TO DRG.NO:IRCL 579(GF 215078 H) IN F/C .DC NO.19243-W DT.24.02.2012() AS PER DRG & SPECIFICATION C NOT ESTAB.
Category : P
Grade : III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Slush Brush[70]() Specification : as per Drg. No.: K-9009 with Firm’s Material E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BRUSH AS PER DRG No K 9003 STAR WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9003* WITH FIRMS MATERIAL E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Slush Brush[70]() Specification : as per Drg. No.: K-9009 with Firm’s Material E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)[70]() Specification : AS PER D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]() Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025 C Nonestab
2) OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE[70]() Specification : OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.[71]() Specification : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.[70]() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Nonestab
2) BRUSH CLEANING for MAG[71]() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Brush Cleaning Chamber[71]() Specification : Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
2) BRUSH CLEANING CHAMBER FOR MAG[71]() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO. 17850-SA DT.12-4-84 IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN DRG No SK 6531 TE[70]() Specification : PIN DRG No SK- 6531/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SELECTOR STOP AS PER DRG No K 1103 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 1103 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET BULLET GUIDE AS PER DRG NO K 1102 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1102 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109[70]() Specification : SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109 C Nonestab
Category :
Grade : Grade III
Size : S
172 RISHI CHEMICAL WORKS (P) LTD
"KOH-I-NOOR' BUILDING, 105, PARK STREET PARK STREET KOLKATA West Bengal
PIN1 : 700016
Phone No. : 22290068 		CALR00117F

Download 		1) Cordite Factory Arvankadu
Name Specification Use Status
1) POTASSIUM SULPHATE GR.I () JSS 6810-110:2011(Rev. No.3)Retained on 150 Micrometer IS sieve: NIL R Estab
Category : DDP,DP
Grade : II
Size : S
1) Cordite Factory Arvankadu
Name Specification Use Status
1) POTASSIUM SULPHATE GR.I () JSS 6810-110:2011(Rev. No.3)Retained on 150 Micrometer IS sieve: NIL R Estab
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) POTASSIUM CARBONATE() SPECN. IS7129-921ST REV. REAFF 2010 E Not Estab
Category : DP
Grade : I
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) POTASSIUM CARBONATE() SPECN. IS7129-921ST REV. REAFF 2010 E Not Estab
Category : DP
Grade : I
Size : S
173 R.K. ENTERPRISES
FCA-4029, SGM NAGAR,NIT FARIDABAD SGM NAGAR FARIDABAD Haryana
PIN1 : 121001
Phone No. : 2416757 		RTKP05255F

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) ASSEMBLY OF KARABINER SCREW TYPE DRG.NO. S-1815-00, COMPRISING OF: (1) BODY, (2) LOCKING SCREW, (3) LEVER, (4) COMPRESSION SPRING, (5) BIT, (6) RIVET. NOTE: ITEM NO.1, 2,3,4,5 WILL BE SUPPLIED BY OFD & ITEM NO.6 WILL BE MANUFACTURED BY TRADE IT SELF FOR ASSEMBLY.() As per required specification C Not Estb.
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) ASSEMBLY OF KARABINER SCREW TYPE DRG.NO. S-1815-00, COMPRISING OF: (1) BODY, (2) LOCKING SCREW, (3) LEVER, (4) COMPRESSION SPRING, (5) BIT, (6) RIVET. NOTE: ITEM NO.1, 2,3,4,5 WILL BE SUPPLIED BY OFD & ITEM NO.6 WILL BE MANUFACTURED BY TRADE IT SELF FOR ASSEMBLY.() As per required specification C Not Estb.
Category : DDP,DP
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138[62]() Specification : DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138[62]() Specification : DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MARKER LIGHT GCT-64-KL[18]() Specification : DRG NO. 172.71.035CB-2CB C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MARKER LIGHT GCT-64-KL[18]() Specification : DRG NO. 172.71.035CB-2CB C Nonestab
Category : p
Grade : Grade III
Size : S
174 ALCOA FORGINGS & EXTRUSIONS HANNOVER.
GOTTINGER CHAUSSEE 12 - 14. HANNOVER. GERMANY.
PIN1 : 911364
Phone No. : 004951142075447 		0126700327

Download 		1) Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY ROD 75 MM DIA[DTD 5124]() DTD 5124 R ESTAB.
Category : DDP
Grade : I
Size : L
175 NEW METALS & CHEMICALS LTD
RUE DE ST LAWRENCE, WALTHAM ABBEY. ESSEX, EN9 1PF. UNITED KINGDOM
PIN1 : 768393
Phone No. : 00441992711111 		GB23300133

Download 		1) Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) COBALT POWDER[CQAM - 58]() CQAM - 58 R ESTAB.
2) IRON POWDER.[CQAM - 58]() CQAM - 58 R ESTAB.
3) MOLYBDENUM POWDER.[CQAM - 58]() CQAM - 58 R ESTAB.
Category : DDP
Grade : I
Size : L
176 M/s Swan Enterprises
49 & 50, SIDCO INDUSTRIAL ESTATE, GUMMIDIPOONDI CHENNAI TAMIL NADU
PIN1 : 601201
Phone No. : 044- 27922687 		AAECS3138G

Download 		1) Vehicle Factory Jabalpur

[Deemed Registration]
Name Specification Use Status
1) Bracket Cab Mounting Rear LH Description : Bracket Cab Mounting Rear LH() Specification : As per Specification PART NO- B0122906-B C Estab
Category : ddp
Grade : 3
Size : S
177 TRIGNO ENGINEERING PVT. LTD.
Sandhya Farm, Raghunathpura, Doddaballapur, Bangalore, Karnataka
PIN1 : 561203
Phone No. : 080-23614625, 23615264
GSTIN : 29AAACT74790D1Z 		BLRT00774E

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR 40 MM MGL/UBGL AMMN. (1) CASE (2) BASE PLUG (3) INSERT (4) SKIRT (5) CUP() AS PER AFK SPECN. C Not Estab.
2) FRAGMENTATION SLEEVE FOR ROUND 40 MM MGL AS PER DRG. NO.AFK-SK 208/05 DT.07-10-2005. SHT.1 & 2() DRG. NO.AFK-SK 208/05 C Not Estab.
3) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD (L) 11855, PT NO TV 44 SPECN. CQA(A) 2351() CQA(A) 2351 C Not Estab.
4) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504() CQA(A) 1504 C Not Estab.
5) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C() DRG. NO. F-1334-230761-C C Not Estab.
6) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135() DGOF 135 C Not Estab.
7) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3B EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE() CQA (A) 2348 C Not Estab.
8) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3A EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE() CQA (A) 2348 C Not Estab.
9) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942() DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942 C Not Estab.
10) CONTAINER FOR AUG CHARGE 51 MM TO DRG. NO. ARDE 1935, PT. NO. ITV 28A SPECN. CQA(A) 2303() CQA(A) 2303 C Not Estab.
11) CUP BRASS FOR CASE (FOR CARTGS SA BALL .303" MK-7)TO DRG.NO. AFK/CUP-1/44/C SHEET NO. 1() DRG.NO. AFK/CUP-1/44/C C Not Estab.
12) CUP FOR CASE CTG SA 5.56 MM BALL (FOR 2 DRAW PROCESS) AS PER DRG NO. AFK/CUP-31A() DRG NO. AFK/CUP-31A C Not Estab.
13) CUP BRASS FOR CASE EMPTY TO DRG. NO. KF-CUP-3/44() DRG. NO. KF-CUP-3/44 C Not Estab.
14) CUP FOR BULLET TO DRG NO.AFK/CUP-9/44 DT.10-1-03.MATERIAL-GILDING METAL (SPECN.NO.IS:2768-1982)() DRG NO.AFK/CUP-9/44 C Not Estab.
15) CUP FOR BULLET GILDING METAL FOR CARTG S.A. 7.62 MM BALL-A TO DRG NO AFK/CUP-25() DRG NO AFK/CUP-25 C Not Estab.
16) CUP FOR BULLET (FOR ALTERNATIVE TO KF-CUP-29 )TO DRG NO AFK/CUP/34() DRG NO AFK/CUP/34 C Not Estab.
17) CUP TO DRG NO ARDE 2043 DET NO 5 PT. NO. ISV 1764 SPECN. NO. CQA(A) 2804() CQA(A) 2804 C Not Estab.
18) FUZE PERCUSSION DA NO 162 MK9 (M-1) BRASS WITH CAP DESIGN REF NO. CIA/AMN/666 PT NO.IQX 41 GE() CQA(A) 0917 C Not Estab.
19) FUZE PERCN. D.A. NO.117 MK-20 EMPTY WITH CAP TO DES. REF. LS/10744/GE/341 PT. NO. QX 244 GE() IA 1204 C Not Estab.
20) FUZE PERCN. D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DES. REF. NO. CIA/AMN/273 PT.NO. IQX 35 GE() CQA(A) 0917 C Not Estab.
21) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN. CQA(A) 0922() CQA(A) 0922 C Not Estab.
22) HALF CUP TO DESIGNERS REF. NO. CIA/AMN/2158 PT. NO. ISV 1740() DRG. NO. CIA/AMN/2158 PT. NO. ISV 1740 C Not Estab.
23) HALF CUP B DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862() DRG. NO. CIA/AMN/851 PT.NO. ISV 862 C Not Estab.
24) IGNITION ELEMENT (EMPTY) TO DRG.NO. CQA(A)/AMN/3229 PT. NO. IQV 30 A() DRG.NO. CQA(A)/AMN/3229 PT. NO. IQV 30 A C Not Estab.
25) IGNITER CASING CQA(A) SEALED DRG NO 04-749-130222-03.1E() CQA(A) DRG NO 04-749-130222-03.1E C Not Estab.
26) IGNITION ELEMENT FOR PRIMER M 191 A2 CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E() DRG.NO. 04-44-79000-06105-4E C Not Estab.
27) INNER CASE FOR PRIMER M 191 A2 DRG. NO. 04-44-79000-06103-3E() CQA(A) DRG. NO. 04-44-79000-06103-3E C Not Estab.
28) INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E() DRG NO 04-749-130222-02.1E C Not Estab.
29) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804() CQA(A)1804 C Not Estab.
30) SWITCH NO. 4 PULL MK-1/L - EMPTY ASSEMBLY TO DRG. NO. DD(L) 15250() DRG. NO. DD(L) 15250 C Not Estab.
31) TAIL UNIT 8 A WITH CAP, DES REF CQA(A)/ AMN/2906 PART NO ITV 26 SA SPECN CQA(A) 2324() CQA(A) 2324 C Not Estab.
Category : P
Grade : II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PROTECT COVER DRG.NO. NASK/776/9/2[60]() Specification : DRG. NO. NASK 776/9/2 (PROVISIONAL) DT.11-08-99. C Nonestab
Category : P
Grade : II
Size :
1) Ammunition Factory Khadki
Name Specification Use Status
1) TRI PLASTIC TUBE FOR SA 12 BORE 70M[21]() Specification : DRG. NO. AFK/SK-563-08 R Nonestab
2) TRIMMED PLASTIC TUBE[21]() Specification : DRG NO AFK/SK-564-08 R Nonestab
Category : P
Grade : II
Size :
1) Ammunition Factory Khadki
Name Specification Use Status
1) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG. NO. F-1334-230761-C C Nonestab
2) SET OF COMPONENTS FOR 40 MM MGL/UBGL AMMN. (1) CASE (2) BASE PLUG (3) INSERT (4) SKIRT (5) CUP [60]() Specification : AS PER AFK SPECIFICATION C Nonestab
3) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN. CQA(A) 0922[60]() Specification : CQA(A) 0922 C Nonestab
4) CONTAINER FOR AUG CHARGE 51 MM TO DRG. NO. ARDE 1935, PT. NO. ITV 28A SPECN. CQA(A) 2303 [60]() Specification : CQA(A) 2303 C Nonestab
5) SWITCH NO. 4 PULL MK-1/L - EMPTY ASSEMBLY TO DRG. NO. DD(L) 15250[60]() Specification : DRG. NO. DD(L) 15250 C Nonestab
6) IGNITION ELEMENT FOR PRIMER M 191 A2 CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E[60]() Specification : CQA(A) DRG. NO. DRG.NO. 04-44-79000-06105-4E C Nonestab
7) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3A EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE[60]() Specification : CQA (A) 2348 C Nonestab
8) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3B EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE[60]() Specification : CQA (A) 2348 C Nonestab
9) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD (L) 11855, PT NO TV 44 SPECN. CQA(A) 2351[60]() Specification : CQA(A) 2351 C Nonestab
10) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[60]() Specification : CQA(A) 1504 C Nonestab
11) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942 [60]() Specification : DRG NO ARDE 2233 DET NO.1 PT. NO ISV 1942 C Nonestab
12) INNER CASE FOR PRIMER M 191 A2 DRG. NO. 04-44-79000-06103-3E[60]() Specification : CQA(A) SEALED DRG.NO. 04-44-79000-06103-3E C Nonestab
13) INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E[60]() Specification : CQA[A] SEALED DRG NO 04-749-130222-02.1E C Nonestab
14) TAIL UNIT 8 A WITH CAP, DES REF CQA(A)/ AMN/2906 PART NO ITV 26 SA SPECN CQA(A) 2324[60]() Specification : CQA(A) 2324 C Nonestab
15) FUZE PERCN. D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DES. REF. NO. CIA/AMN/273 PT.NO. IQX 35 GE[60]() Specification : CQA(A) 0917 C Nonestab
16) FUZE PERCN. D.A. NO.117 MK-20 EMPTY WITH CAP TO DES. REF. LS/10744/GE/341 PT. NO. QX 244 GE[60]() Specification : IA 1204 C Nonestab
17) HALF CUP B DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862[60]() Specification : DRG. NO. CIA/AMN/851 PT.NO. ISV 862 C Nonestab
18) HALF CUP TO DESIGNERS REF. NO. CIA/AMN/2158 PT. NO. ISV 1740[60]() Specification : DRG. NO. CIA/AMN/2158 PT. NO. ISV 1740 C Nonestab
19) IGNITION ELEMENT (EMPTY) TO DRG.NO. CQA(A)/AMN/3229 PT. NO. IQV 30 A [60]() Specification : DRG.NO. CQA(A)/AMN/3229 PT. NO. IQV 30 A C Nonestab
20) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804[60]() Specification : CQA(A)1804 C Nonestab
21) CUP TO DRG NO ARDE 2043 DET NO 5 PT. NO. ISV 1764 SPECN. NO. CQA(A) 2804[60]() Specification : CQA(A) 2804 C Nonestab
22) FRAGMENTATION SLEEVE FOR ROUND 40 MM MGL AS PER DRG. NO.AFK-SK 208/05 DT.07-10-2005. SHT.1 & 2[60]() Specification : DRG. NO.AFK-SK 208/05 C Nonestab
23) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 C Nonestab
24) CUP BRASS FOR CASE (FOR CARTGS SA BALL .303 MK-7)TO DRG.NO. AFK/CUP-1/44/C SHEET NO. 1[60]() Specification : DRG.NO. AFK/CUP-1/44/C C Nonestab
25) CUP FOR CASE CTG SA 5.56 MM BALL (FOR 2 DRAW PROCESS) AS PER DRG NO. AFK/CUP-31A[60]() Specification : DRG NO. AFK/CUP-31A C Nonestab
26) CUP BRASS FOR CASE EMPTY TO DRG. NO. KF-CUP-3/44[60]() Specification : DRG. NO. KF-CUP-3/44 C Nonestab
27) CUP FOR BULLET TO DRG NO.AFK/CUP-9/44 DT.10-1-03.MATERIAL-GILDING METAL (SPECN.NO.IS:2768-1982)[60]() Specification : DRG NO.AFK/CUP-9/44 C Nonestab
28) CUP FOR BULLET GILDING METAL FOR CARTG S.A. 7.62 MM BALL-A TO DRG NO AFK/CUP-25[60]() Specification : DRG NO AFK/CUP-25 C Nonestab
29) CUP FOR BULLET (FOR ALTERNATIVE TO KF-CUP-29 )TO DRG NO AFK/CUP/34[60]() Specification : DRG NO AFK/CUP/34 C Nonestab
30) FUZE PERCUSSION DA NO 162 MK9 (M-1) BRASS WITH CAP DESIGN REF NO. CIA/AMN/666 PT NO.IQX 41 GE[60]() Specification : CQA(A) 0917 C Nonestab
31) IGNITER CASING CQA(A) SEALED DRG NO 04-749-130222-03.1E[60]() Specification : CQA(A) DRG NO 04-749-130222-03.1E C Nonestab
32) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : P
Grade : II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle C Nonestab
2) BUTT FRAME ASSY AS PER DRG NO.K 6006 WITH FIRM’S MATERIAL[70]() Specification : AS PER DRG NO.K 6006 WITH FIRM’S MATERIAL C Nonestab
3) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Nonestab
4) SPRING EXTRACTOR TO DRG.No.: 29P 0019* required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle C Nonestab
5) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
6) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL C Nonestab
7) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL E Nonestab
Category : P
Grade : II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL E Nonestab
Category : P
Grade : II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL E Nonestab
Category : P
Grade : II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]() Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR C Nonestab
2) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]() Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA C Nonestab
3) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]() Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA C Nonestab
4) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA C Nonestab
5) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]() Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]() Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]() Specification : AS PER OFT REQUIREMENTS E Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL R Nonestab
2) MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL R Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PROTECT COVER DRG.NO. NASK/776/9/2() Specification : DRG. NO. NASK 776/9/2 (PROVISIONAL) DT.11-08-99. R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL C Nonestab
2) 6432300008 MS PLATE 3MM TH PHOS ERA[64]() Specification : IS:2062-1994 C Nonestab
3) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
4) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
5) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Nonestab
6) 0832485001 WIRE SOLDER SN 60 PERC[08]() Specification : BS 441. C Nonestab
7) 1421233128 MILL BOARD CUP[14]() Specification : JSS 9310-01:2007 R Nonestab
8) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
9) 1004612403 POWDER TALC FRENCH CHALK TO SPECN[10]() Specification : IND/ME/236 R Nonestab
10) 6334100725 HEX BOLT M4 X 20 FOR PINAKA RKT[63]() Specification : IS-1367 GRADE A2-70 C Nonestab
11) 6334100727 SPRING WASHER DIA 4MM FOR PINAKA RK[63]() Specification : STAINLESS STEEL MACHINED WASHER DIA 4.5MM IS 2016 OR DIN125A OR EQUIVALENT C Nonestab
12) 6334100726 STAINLESS STEE NUT M4 FOR PINKA RKT[63]() Specification : IS-1367 C Nonestab
13) 6334100728 STEEL MACHINED WASHER FOR PIN[63]() Specification : IS 2016 C Nonestab
14) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]() Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008 C Nonestab
15) 6141701400 CONNECTR NO 3981 FOR MINE AP 1A DIR[61]() Specification : CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM C Nonestab
16) 1001253905 GLYCERINE PURE AR[10]() Specification : IS:1796-1986 AR GRADE R Nonestab
17) 6432420001 LEG ASSY DRG ITX 46 SA[64]() Specification : LEG ASSEMBLY TO DESIGNER'S REF. NO. ARDE-1521, DRG.PART NO. ITX-46 SA DC NO. 35824-A. C Nonestab
18) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
19) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL R Nonestab
2) 6432300008 MS PLATE 3MM TH PHOS ERA[64]() Specification : IS:2062-1994 C Nonestab
3) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
4) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
5) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Nonestab
6) 0832485001 WIRE SOLDER SN 60 PERC[08]() Specification : BS 441. R Nonestab
7) 1421233128 MILL BOARD CUP[14]() Specification : JSS 9310-01:2007 R Nonestab
8) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
9) 1004612403 POWDER TALC FRENCH CHALK TO SPECN[10]() Specification : IND/ME/236 R Nonestab
10) 6334100725 HEX BOLT M4 X 20 FOR PINAKA RKT[63]() Specification : IS-1367 GRADE A2-70 C Nonestab
11) 6334100727 SPRING WASHER DIA 4MM FOR PINAKA RK[63]() Specification : STAINLESS STEEL MACHINED WASHER DIA 4.5MM IS 2016 OR DIN125A OR EQUIVALENT C Nonestab
12) 6334100726 STAINLESS STEE NUT M4 FOR PINKA RKT[63]() Specification : IS-1367 C Nonestab
13) 6334100728 STEEL MACHINED WASHER FOR PIN[63]() Specification : IS 2016 C Nonestab
14) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]() Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008 C Nonestab
15) 6141701400 CONNECTR NO 3981 FOR MINE AP 1A DIR[61]() Specification : CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM C Nonestab
16) 1001253905 GLYCERINE PURE AR[10]() Specification : IS:1796-1986 AR GRADE R Nonestab
17) 6432420001 LEG ASSY DRG ITX 46 SA[64]() Specification : LEG ASSEMBLY TO DESIGNER'S REF. NO. ARDE-1521, DRG.PART NO. ITX-46 SA DC NO. 35824-A. R Nonestab
18) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
19) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
20) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL[61]() Specification : CQA (A) 1837 C Nonestab
Category : p
Grade : Grade III
Size : S
178 LIBAS DRESSES
149 ALIZAI TUN WALI MASJID SHAHJAHANPUR Uttar Pradesh
PIN1 : 242001
Phone No. : 228080
GSTIN : 09ABMPH0815M1ZG 		ABMPH0815M

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF PONCHO GLACIER[21]() Specification : FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-IN R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Ground Sheet TPO OG[21]() Specification : Fabrication of Ground Sheet TPO OG Specification - JSS 8305-35:2014 R Estab
2) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]() Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS. E Estab
3) FABRICATION OF BAG WATER PROOF[21]() Specification : FABRICATION OF BAG WATER PROOF AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS. E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF COAT ECC IMP VER[21]() Specification : FABRICATION OF COAT ECC IMP VER FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C E Estab
Category :
Grade : Grade III
Size : S
179 Biihani Manufacturing Co. Pvt. Ltd.
B-184 Okhla Industrial Area, Phase-1 Phase-I NEW DELHI Delhi
PIN1 : 110020
Phone No. : 26371343
GSTIN : 08AAACB2742F1Z2 		AAACB2742F

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) PVC COMPOUNDS WL 80B LT-42[70]() Specification : PVC COMPOUNDS WL 80B LT-42 R Estab
2) PVC MASTER BATCHES GREY, BLACK[70]() Specification : PVC MASTER BATCHES GREY, BLACK R Estab
3) PVC Compound BS 6746 TYPE-6 WB-85[70]() Specification : PVC Compound BS 6746 TYPE-6 WB-85 R Estab
4) PVC MASTER BATCHES OF VARIOUS KINDS[70]() Specification : AS PER RELEVENT SUPPLY ORDER R Estab
5) POLYTHENE COMPOUND BLACK D10[70]() Specification : POLYTHENE COMPOUND BLACK D10 R Estab
Category :
Grade : Grade III
Size : M
180 Manjulam Enterprises
247, Srinath Ki Taliya Srinath Ki Taliya Jabalpur Madhya Pradesh
PIN1 : 482002
Phone No. : 4010081
GSTIN : 23AKDPG7731M1Z4 		AKDP07731M

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Cr PLTD DE SPANNER 8X9[90]() Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3. C Nonestab
2) Cr PLTD DE SPANNER 14X15[90]() Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4 C Nonestab
3) CROME PLATED DE SPANNER 25X28[90]() Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4 C Nonestab
4) Cr PLTD DE SPANNER 12 X 13 mm[90]() Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. C Nonestab
5) Cr PLTD DE SPANNER 24X26[90]() Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3. C Nonestab
6) CROME PLATED DE SPANNER 21X23[90]() Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL. C Nonestab
7) Cr PLTD DE SPANNER 16 X 17[90]() Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3. C Nonestab
8) CROME PLATED DE SPANNER 24X27[90]() Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3. C Nonestab
9) Cr PLTD DE SPANNER 19X22[90]() Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4. C Nonestab
10) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch[90]() Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA NI CR PLATED SPANNER DEAC19X22[90]() Specification : NI CR.PLATED SPANNER DEAC19X22 TO IS:2028,HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY).MADE FROM CHROME VANADIUM STEEL C Nonestab
2) LPTA NI CR PLATED RING SPANNER24X27[90]() Specification : NI-CR.PLATED RING SPANNER 24X27 TO IS:2029 HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Cr PLTD DE SPANNER 8X9[90]() Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3. C Estab
2) Cr PLTD DE SPANNER 14X15[90]() Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4 C Estab
3) CROME PLATED DE SPANNER 25X28[90]() Specification : CROME PLATED DE SPANNER 25X28 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A -SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.X4700611-V4 DRG. NO. X4700211-V4 C Estab
4) Cr PLTD DE SPANNER 12 X 13 mm[90]() Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. C Estab
5) Cr PLTD DE SPANNER 24X26[90]() Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3. C Estab
6) CROME PLATED DE SPANNER 21X23[90]() Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL. C Estab
7) Cr PLTD DE SPANNER 16 X 17[90]() Specification : CROME PLATED DE SPANNER 16 X 17 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/MAKE AS PER IS 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4734911-V3. C Estab
8) CROME PLATED DE SPANNER 24X27[90]() Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3. C Estab
9) Cr PLTD DE SPANNER 19X22[90]() Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4. C Estab
10) DE SPANNER SAE 5 by 8 inch X 9 by 16 inch[90]() Specification : CHROME PLATED - DE SPANNER SAE 5/8" X 9/16" (A/F S1 - 0.629" / 0.633" X S2 - 0.566" / 0.570"), OVERALL LENGTH 150MM MIN. MAKE - EVEREST/TAPARIA/AMBIKA TOOLS/JHALANI EXPERT/JK/BETA /GEDORE/JHALANI/VENUS/ , MADE OF CHROME VANADIUM STEEL,OTH C Estab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Cr PLTD DE SPANNER 8X9[90]() Specification : CROME PLATED DE SPANNER 8X9 EVEREST/TAAPARIA/GEDORE/JHALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS: 2028-A SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700111-V3. C Nonestab
2) Cr PLTD DE SPANNER 14X15[90]() Specification : CROME PLATED DE SPANNER 14X15 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700211-V4 C Nonestab
3) NIC CROME PLATED RING SPA10X11[90]() Specification : CROME PLATED RING SPANNER 10X11 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/ BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO.F4735500-V2 C Nonestab
4) CROME PLATED SCREW DRIVER 8 inch[90]() Specification : CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL. C Nonestab
5) Cr PLTD DE SPANNER 12 X 13 mm[90]() Specification : CROME PLATED DE SPANNER 12 X 13 EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS:2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. C Nonestab
6) CR PL HEX SOC SCREW KEY 6 MM[90]() Specification : CROME PLAED/BLACK FINISH HEXAGON SOCKET SCREW KEY 6 MM EVERE ST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS /JHALANI/JHALANI EXPER /JK/ BETA MAME ASPER IS:3082 MADE OF CROME VANADIUM STEEL. C Nonestab
7) CR PL HEX SOC SCREW KEY 10 MM[90]() Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL. C Nonestab
8) Cr PLTD DE SPANNER 24X26[90]() Specification : CROME PLATED DE SPANNER 24X26 mm EVEREST/TAAPARIA/GEDORE/JHA LANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS:2028 -A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X 4700511-V3. C Nonestab
9) NIC CROME PLATED RING SPA18X19[90]() Specification : CROME PLATED RING SPANNER 18X19 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKAA/VENUS TOOLS MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. DRG.NO.X4704011-V2 C Nonestab
10) CROME PLATED DE SPANNER 21X23[90]() Specification : CROME PLATED DE SPANNER 21X23mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS:2028- A-SERIES-C MADE OF CROME VANADIUM STEEL. C Nonestab
11) NIC CROME PLATED RING SPA19X22[90]() Specification : CROME PLATED RING SPANNER 19X22 mm EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/J K/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4701011-V2. C Nonestab
12) CROME PLATED DE SPANNER 24X27[90]() Specification : CROME PLATED DE SPANNER 24X27mm EVEREST/TAAPARIA/GEDORE/JHAL ANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE ACCEPTABL E AS PER IS-2028-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO- X4700411-V3. C Nonestab
13) NIC CROME PLATED RING SPA24X27[90]() Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2. C Nonestab
14) NIC CROME PLATED RING SPA14X15[90]() Specification : CROME PLATED RING SPANNER 14X15 MM EVEREST/TAAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700911-V2. C Nonestab
15) Cr PLTD DE SPANNER 19X22[90]() Specification : CROME PLATED DE SPANNER 19X22 EVEREST/TAAPARIA/GEDORE/JHALAN I/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER IS: 2028-A-SERIES-C MADE OF CROME VANADIUM STEEL. X4700311-V4 DRG.NO. X4700211-V4. C Nonestab
16) CR PL HEX SOC SCREW KEY 12 MM[90]() Specification : CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2. C Nonestab
17) NIC CROME PLATED RING SPA16X17[90]() Specification : CROME PLATED RING SPANNER 16X17 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. F4735211 V2. C Nonestab
18) NIC CROME PLATED RING SPA12X13[90]() Specification : CROME PLATED RING SPANNER 12X13 MM EVEREST/TAAPARIA/GEDORE/J HALANI/ JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS/ MAKE AS PER- IS-2029-1998-A-SERIES-C MADE OF CROME VANADIUM STEEL. PART NO. X4700811-V2. C Nonestab
19) CR PL SCREW DRIVER12 inch X 2 X 13[90]() Specification : CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL. C Nonestab
20) CR PLATED SCREW DRIVER PHILIPS[90]() Specification : CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL. C Nonestab
Category :
Grade : Grade III
Size : S