List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
221 MICROFINE BUSHINGS PRIVATE LTD
107, SIDCO INDUSTRIAL ESTATE 2ND LANE, PATTARAVAKKAM RLY STN RD CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 26250432
GSTIN : 33AACCM1179M1ZC 		CHEM01116D

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP ASSY[62]FUEL FILTER ASSY TO DRG NO.CB 20-29-008() Specification : CB 20-29-008 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) REGULATOR LEVER TO DRG NO. SB 315-777-2() Specification : SB 315-777-2 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) FUEL FILTER ASSY Description : FUEL FILTER ASSY TO DRG NO. CB 20-29-00-8() Specification : FUEL FILTER ASSY TO DRG NO. CB 20-29-00-8 C Estab
2) GOVERNOR DISC Description : GOVERNOR DISC TO DRG NO.20-15-610-1() Specification : GOVERNOR DISC TO DRG NO.20-15-610-1 C Estab
3) GOVERNOR LEVER Description : GOVERNOR LEVER TO DRG NO. SB 315-662-3() Specification : GOVERNOR LEVER TO DRG NO. SB 315-662-3 C Estab
4) HYDRAULIC CYLINDER & PISTON Description : HYDRAULIC CYLINDER & PISTON TO DRG NO. SB 326-10-1 & SB 326-04-1() Specification : HYDRAULIC CYLINDER & PISTON TO DRG NO. SB 326-10-1 & SB 326-04-1 C Estab
Category : ddp
Grade : 3
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Advance Angle Coupling for V92 S2 engine() To Drg. No. SB 326-001 C Estab
2) Cap of Master Con.rod (upto opn no.130)() 304-15-2 C Estab
3) Forked Con.rod cap (upto opn no.120)() 20-04-15-4 C Estab
4) Master Con.rod (Upto opn no.110)() 304-12-7 C Estab
5) Forked Con.rod (upto opn no.100)() 20-04-12-3 C Estab
6) Articulated Con.rod cap(upto opn no.110)() 20-04-22-4 C Estab
7) TA in machining of Cylinder head LH () 306-34-27 R Estab
8) TA in machining of Cylinder head RH () 306-16-18 R Estab
9) TA in machining of Cylinder head LH & RH() SB 306-06-13 & SB 306-08-13 R Estab
10) Articulated Connecting Rod (opn no.90)() 20-04-19-4 C Estab
11) Water Pump() SB 411-00-56 E Estab
12) Articulated Connecting Rod (opn no.100)() 3304-19-4 C Estab
13) Slide Valve assy() SB 20-34-13 E Estab
14) Coupling Body assy() SB 20-34-12 E Estab
15) Booster Pump() SB 332-00-11 E Estab
16) Cylinder Head LH() 306-34-19 E Estab
17) Cylinder Head RH() 306-16-23 E Estab
18) Cylinder Head Cover LH() SB 306-09-10 E Estab
19) Cylinder Head Cover RH() SB 306-08-8 E Estab
20) Camshaft Bearing assy() SB 306-04-2 E Estab
21) Forked Con.rod (Fully finished)() SB 20-04-02-4 E Estab
22) Articulated Con.rod (Fully finished)() SB 20-04-03-4 E Estab
23) Oil Pump Assy() SB 20-12-00-13 E Estab
24) Master Connecting rod Upto Opn-110() 304-12-7 C Estab
25) MCR Cap (Pre-machined)() 304-15-2 C Estab
26) MCR (Pre-machined)() 304-12-7 C Estab
Category : P
Grade : II
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Advance Angle Coupling for V92 S2 engine[06]() Specification : To Drg. No. SB 326-001 R Estab
2) Water Pump[06]() Specification : SB 411-00-56 R Nonestab
3) OIL PUMP ASSY[06]() Specification : SB 20-12-00-13 R Estab
4) Camshaft Bearing assy[06]() Specification : SB 20-06-04-4 R Estab
5) Cap of Master Con.rod (upto opn no.130)[06]() Specification : 304-15-2 R Estab
6) Booster Pump[06]() Specification : SB 332-00-11 R Estab
7) Coupling Body Assy[06]() Specification : SB 20-34-12 R Estab
8) Forked Con.rod cap (upto opn no.120)[06]() Specification : 20-04-15-4 R Estab
9) Master Con.rod (Upto opn no.110)[06]() Specification : 304-12-7 R Estab
10) Forked Con.rod (upto opn no.100)[06]() Specification : 20-04-12-3 R Estab
11) Articulated Con.rod cap(upto opn no.110)[06]() Specification : 20-04-22-4 R Estab
12) TA in machining of Cylinder head LH [06]() Specification : 306-34-27 R Estab
13) TA in machining of Cylinder head RH [06]() Specification : 306-16-18 R Estab
14) TA in machining of Cylinder head LH & RH[06]() Specification : SB 306-06-13 & SB 306-08-13 R Estab
15) Articulated Connecting Rod (opn no.90)[06]() Specification : 20-04-19-4 R Estab
16) Articulated Connecting Rod (opn no.100)[06]() Specification : 3304-19-4 R Estab
17) Slide Valve assy[06]() Specification : SB 20-34-13 R Estab
18) Cylinder Head LH[06]() Specification : 306-34-19 R Estab
19) Cylinder Head RH[06]() Specification : 306-16-23 R Estab
20) Cylinder Head Cover LH[06]() Specification : SB 306-09-10 R Estab
21) Cylinder Head Cover RH[06]() Specification : SB 306-08-8 R Estab
22) Forked Con.rod (Fully finished)[06]() Specification : SB 20-04-02-4 R Estab
23) Articulated Con.rod (Fully finished)[06]() Specification : SB 20-04-03-4 R Estab
24) Master Connecting rod Upto Opn-110[06]() Specification : 304-12-7 R Estab
25) FCR Cap (opn no.120)[06]() Specification : 20-04-15-4 C Estab
Category : P
Grade : II
Size :
1) Engine Factory Avadi
Name Specification Use Status
1) Water Pump assy[SB 20-11-00-6]() Specification : SB 20-11-00-6 E Estab
2) AUTOMATIC FIP ADVANCE ANGLE [SB 20-34-0706]() Specification : SB 20-34-07 C Estab
3) Advance Angle Coupling for V92 S2 engine[SB 326-001]() Specification : To Drg. No. SB 326-001 C Estab
4) Water Pump [SB 411-00-56]() Specification : SB 411-00-56 C Estab
5) OIL PUMP ASSY[ SB 20-12-00-13]() Specification : SB 20-12-00-13 E Estab
6) Camshaft Bearing assy [ SB 20-06-04-4]() Specification : SB 20-06-04-4 C Estab
7) Cap of Master Con.rod (upto opn no.130)[304-15-2]() Specification : 304-15-2 C Estab
8) Booster Pump[SB 332-00-11]() Specification : SB 332-00-11 C Estab
9) Coupling Body Assy [SB 20-34-12]() Specification : SB 20-34-12 C Estab
10) Forked Con.rod cap (upto opn no.120) [SB 20-34-12]() Specification : SB 20-34-12 C Estab
11) Master Con.rod (Upto opn no.110) [304-12-7]() Specification : 304-12-7 C Estab
12) Forked Con.rod (upto opn no.100) [ 20-04-12-3]() Specification : 20-04-12-3 C Estab
13) Articulated Con.rod cap(upto opn no.110)[20-04-22-4]() Specification : 20-04-22-4 C Estab
14) TA in machining of Cylinder head LH [306-34-27]() Specification : 306-34-27 C Estab
15) TA in machining of Cylinder head RH [ 306-16-18]() Specification : 306-16-18 C Estab
16) TA in machining of Cylinder head LH & RH[SB 306-06-13 & SB 306-08-13]() Specification : SB 306-06-13 & SB 306-08-13 C Estab
17) Articulated Connecting Rod (opn no.90) [ 20-04-19-4]() Specification : 20-04-19-4 C Estab
18) Articulated Connecting Rod (opn no.100)[3304-19-4]() Specification : 3304-19-4 C Estab
19) Slide Valve assy[ SB 20-34-13]() Specification : SB 20-34-13 C Estab
20) Cylinder Head LH[306-34-19]() Specification : 306-34-19 C Estab
21) Cylinder Head RH[306-16-23]() Specification : 306-16-23 C Estab
22) Cylinder Head Cover LH[SB 306-09-10]() Specification : SB 306-09-10 C Estab
23) Cylinder Head Cover RH[ SB 306-08-8() Specification : SB 306-08-8 C Estab
24) Forked Con.rod (Fully finished) [SB 20-04-02-4]() Specification : SB 20-04-02-4 C Estab
25) Articulated Con.rod (Fully finished) [SB 20-04-03-4]() Specification : SB 20-04-03-4 C Estab
26) Master Connecting rod Upto Opn-110 [304-12-7]() Specification : 304-12-7 C Estab
27) FCR Cap (opn no.120) [20-04-15-4]() Specification : 20-04-15-4 C Estab
28) Cam shaft Thrust Bearing [SB 306-03-3]() Specification :[SB 306-03-3] C Estab
Category : P
Grade : II
Size :
1) Heavy Vehicle Factory
Name Specification Use Status
1) RAMMER CHAIN / 172.26.004CB-5/PL[62]() Specification : RAMMER CHAIN / 172.26.004CB-5/PL C Nonestab
2) RAMMER CHAIN / 172.26.004CB-5[62]() Specification : RAMMER CHAIN / 172.26.004CB-5 C Nonestab
Category : p
Grade : Grade III
Size : S
222 Sri Vamshee Industrial Products
Plot 98&100,Bhagya Laxmi Nagar,Quthbullapur IDA jeedimetla hyderabad Telangana
PIN1 : 500055
Phone No. : 29704492
GSTIN : 36AAMPA7220L1ZP 		AAMPA7220L

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD HINGED FRONT LEFT HAND TO 6206803352[62]() Specification : SHIELD HINGED FRONT LEFT HAND TO DRG NO.184.04.029CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD REAR LEFT HAND TO 6206803050[62]() Specification : SHIELD REAR LEFT HAND TO DRG NO.172.04.198CB C Nonestab
2) SHIELD REAR RIGHT HAND TO 6206803052[62]() Specification : SHIELD REAR RIGHT HAND TO DRG NO.172.04.200CBCB C Nonestab
3) SHIELD HINGED FRONT RIGHT HAND TO 6206803351[62]() Specification : SHIELD HINGED FRONT RIGHT HAND TO DRG NO. 184.04.028CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET CELL LIFTING TO 6206890004[62]() Specification : BRACKET CELL LIFTING TO DRG NO. 175.28.002CB-2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LOUVER LH TO 6209801477[62]() Specification : PV572.0718.2363 C Nonestab
2) LOUVER RH TO 6209801480[62]() Specification : PV572.0718.2362 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LH LEVER ASSY TO 6206403001[62]() Specification : LH LEVER ASSY TO DRG NO. 172.42.003CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER ASSY TO 6201095016[62]() Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) RWA BRACKETS (07 TYPES) () SERVICE ASSISTANCE C Not Established
2) MACHINING ASSISTANCE FOR SMALL, MEDIUM & LARGE COMPONENTS() AS PER DRG C Non Established
Category : P
Grade : II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF CENTRAL SPIDER SPROCKET DRG NO 9 A 621 00 001 FROM RAW MATERIAL[91]() Specification : FABRICATION OF CENTRAL SPIDER/SPROCKET DRG NO. 9-A-621.00.001 FROM RAW MATERIAL CENTRAL SPIDER/SPROCKET DRG. NO. M-11467 MACHINING AFTER HEAT TREATMENT AS PER PROCESS SCHEDULE R Nonestab
2) SEMI STAGE MACHINING OF CENTRAL SPIDER SPROCKET TO DRG NO M 11441 FROM INPUT MATERIAL[91]() Specification : SEMI STAGE MACHINING OF CENTRAL SPIDER/SPROCKET TO DRG NO M-11441 FROM INPUT MATERIAL I/CODE NO. 0372150165 (MACHINING AS PER PROCESS SCHEDULE) P Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]() Specification : LEFT HAND SUCTION PUMP COVER TO DRG NO. 172.46.009CB-2CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019 Description : FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019() Specification : FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019 C Estab
2) FABRICATION OF PINION TO DRG NO AO 18 03 025 Description : FABRICATION OF PINION TO DRG NO AO 18 03 025() Specification : FABRICATION OF PINION TO DRG. No. AO-18.03.025 C Estab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981[91]() Specification : COMPLETE MACHINING OF BREECH PIECE (AO-18.01.001), FROM INPUT MATERIAL I/C:- 7230971001 TO BE SUPPLIED BY GSF (I/C-9140033981) C Nonestab
2) SHUTTER BUSH AO 18 01 029 IN FINISHED CONDITION IC 7200200298[72]() Specification : SHUTTER BUSH (AO-18.01.029) IN FINISHED CONDITION (I/C-7200200298) C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FENCE TO 6206109006[62]() Specification : FENCE TO DRG NO. 172.11.026CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BODY ASSY TO 6206861005[62]() Specification : BODY ASSY TO DRG NO. 172.52.046CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PIPE LINE TO 6201066098[62]() Specification : PIPE LINE TO DRG NO. CQA(HV)5.66.066 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]() Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Manufacturing and supply of barrel blank after honing stage[70]() Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) CLUTCH SHAFT ASSY TO 6201063014[62]() Specification : CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL[91]() Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC[71]() Specification : HEAD AUTOMATIC COCKING RAMMER ASSY. TO DRG NO. 2007475 IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET ASSY TO 6201015010[62]() Specification : BRACKET ASSY TO DRG NO. 188.15.018CB-3CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FILLER CAP 011[62]() Specification : FILLER CAP 172.41.011 E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]() Specification : As per TE C Nonestab
2) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270[91]() Specification : Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270 R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF[90]() Specification : MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF). C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9070056720 PART M A OF RB TO DRG GCF 20A SK874[90]() Specification : 9070056720 PART M A OF RB TO DRG GCF 20A SK874 E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]() Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) PLATE TOP TO 6106801853 Description : PLATE TOP TO 6106801853() Specification : V572.0175.8000 C Estab
2) PLATE BOTTOM TO 6106807332 Description : PLATE BOTTOM TO 6106807332() Specification : V572.0175.8025 C Estab
3) ECCENTRIC TO 6201017011 Description : ECCENTRIC TO 6201017011() Specification : 188.17.006-1 C Estab
4) LEVER ASSY TO 6206419050 Description : LEVER ASSY TO 6206419050() Specification : 175.63.047CB C Estab
Category : p
Grade : 2
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF BREECH RING AS PER DRG NO 1002378 FOR BREECH MECH ASSY FOR 40 MM L70 GUN[90]() Specification : FABRICATION OF BREECH RING AS PER DRG. NO. 1002378 FOR BREECH MECH. ASSY. FOR 40 MM L-70 GUN C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF CASING DRG NO AO 18 02 001[91]() Specification : FABRICATION OF CASING DRG NO. AO-18.02.001 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CONVERSION OF BODY ICR 1325[00]() Specification : CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514 (I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I, (II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II, FROM FORGING DRG. NO. RFI/SK/725/1 L. (ICR 1325) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) CENTRAL SPIDER 9 A 621 00 001 IN FINISHED CONDITION[72]() Specification : AS PER DRAWINGS C Nonestab
Category :
Grade : Grade III
Size : S
223 PHANI ENGINEERING INDUSTRY
H.No. 7-4-181, Behind Hotel Skyline Geethanagar, Ferozguda Hyderabad Telangana
PIN1 : 500011
Phone No. : 23878171
GSTIN : 36AAMFP8989P1ZT 		HYDP07664G

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
2) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Body Forging Conversion of Body 7.62mm() DS Cat no.1005-001514 C Established
2) Carrier Breech Block 7.62mm Rifle() DS Cat No. 1005-001578 C Established
3) Eliminator Flash No.2() Tend 1692* C Established
4) Sear() DS Cat No. 1005-001680 C Established
5) Body Forging Conversion of Body 7.62mm() DS Cat no.1005-001514 C Established
6) Carrier Breech Block 7.62mm Rifle() DS Cat No. 1005-001578 C Established
7) Eliminator Flash No.2() Tend 1692* C Established
8) Sear() DS Cat No. 1005-001680 C Established
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]() Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL C Estab
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Pre Machined Blank stage-II for TAR component K4001, K5001, K6001() As per drawing No TEND 2449 C Estab
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]() Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Blade fore sight 32mk-IV Drg no. PHMK-IV-3-1-3[70]() Specification : AS PER DRG. C Estab
2) Block fixing grip pistol Drg. No. AKC-O1/5[70]() Specification : AS PER DRG. C Estab
3) Block Gas carbine Drg. No. AKC-O2/4[70]() Specification : AS PER DRG. C Estab
4) Guide piston extension AMOGH Drg. No. AKC-O2/3*1[70]() Specification : AS PER DRG. C Estab
5) Nut retaining handle Drg no. 5310-002660[70]() Specification : AS PER DRG. C Estab
6) Pawl guide catridge (7.62mm MAGto DS CAT NO. 1005-006626[70]() Specification : AS PER DRG. C Estab
7) Rear sight cursor Drg no. 1005-000433[70]() Specification : AS PER DRG. C Estab
8) Retaining Pin piston in finished Drg no. 5315-001530[70]() Specification : AS PER DRG. C Estab
9) Sear auto carbine Drg. No. AKC-O1/11[70]() Specification : AS PER DRG. C Estab
Category : DDP,DP
Grade : II
Size :
1) Small Arms Factory
Name Specification Use Status
1) Blade fore sight 32mk-IV Drg no. PHMK-IV-3-1-3[70]() Specification : AS PER DRG. C Nonestab
2) Block fixing grip pistol Drg. No. AKC-O1/5[70]() Specification : AS PER DRG. C Nonestab
3) Block Gas carbine Drg. No. AKC-O2/4[70]() Specification : AS PER DRG. C Nonestab
4) Guide piston extension AMOGH Drg. No. AKC-O2/3*1[70]() Specification : AS PER DRG. C Nonestab
5) Nut retaining handle Drg no. 5310-002660[70]() Specification : AS PER DRG. C Nonestab
6) Pawl guide catridge (7.62mm MAGto DS CAT NO. 1005-006626[70]() Specification : AS PER DRG. C Nonestab
7) Rear sight cursor Drg no. 1005-000433[70]() Specification : AS PER DRG. C Nonestab
8) Retaining Pin piston in finished Drg no. 5315-001530[70]() Specification : AS PER DRG. C Nonestab
9) Sear auto carbine Drg. No. AKC-O1/11[70]() Specification : AS PER DRG. C Nonestab
10) Blank for Piston extension stage VI[70]() Specification : Blank for Piston Extension stage VI to Drg. No. SK JVPC730 for JVPC 5.56 MM C Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).[70]() Specification : AS PER DRG. NO. TEND 1692* (ICR 1576) C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]() Specification : AS ER DRG No.TEND 2508 (for K 1207) R Estab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]() Specification : AS PER DRG No.TEND :2509 (for K-1202) C Estab
3) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]() Specification : As per Drg. No.TEND 2517 (for K 2067) C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL C Estab
2) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]() Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL C Estab
2) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL E Estab
3) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]() Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL C Estab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K 2025 C Estab
5) SUPPLY OF REAR SIGHT LEAF[70]() Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF DISCONNECTOR AS PER DRG NO.K-2065 WITHFRMS MATERIAL[70]() Specification : AS PER DRG NO.K-2065 WITHFRMS MATERIAL C Estab
2) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL C Estab
3) AUTO SEAR AS PER DRG NO K 2067 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 2067 WITH FIRMS MATERIAL C Estab
4) SCREW DRIVER AS PER DRG NO K 9006 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 9006 WITH FIRMS MATERIAL E Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Estab
2) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL C Estab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]() Specification : AS PER DRG. NO. K 2012 C Estab
4) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL C Estab
5) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL C Estab
6) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Estab
7) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]() Specification : AS PER DRG NO TEND 2383 STR 2 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]() Specification : AS PER DRG NO TEND 2383 STR 2 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
2) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]() Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL C Nonestab
3) Clamp Guide Link to DSCAT NO 1005 007426 with firms material DC NO 26984 SA A6107 LF No 7013961411[70]() Specification : As per drwaing C Nonestab
4) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]() Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL C Nonestab
5) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]() Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR C Nonestab
6) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]() Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA C Nonestab
7) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]() Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Block Gas to ICR 1322 with OFT material[70]() Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl C Nonestab
2) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]() Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433 Description : Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433() Specification : AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015 C Estab
2) SEAR TRIPPER DS CAT 1005-000620 Description : SEAR TRIPPER DS CAT 1005-000620() Specification : AS PER DRG C Estab
3) PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02 Description : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02() Specification : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02 C Estab
4) EXTRACTOR DS CAT 1005-006633 Description : EXTRACTOR DS CAT 1005-006633() Specification : AS PER DRG C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1, C Nonestab
2) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]() Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA C Nonestab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]() Specification : LATCH AS PER DRAWING NO SK 6519 TE C Nonestab
4) SIGHT LEAF DRG No SK 6540 TE[70]() Specification : SIGHT LEAF DRG No SK-6540/TE C Nonestab
5) SLIDE DRG No SK 6534 TE[70]() Specification : SLIDE DRG No SK-6534/TE C Nonestab
6) LATCH DRG No SK 6535 TE[70]() Specification : LATCH DRG No SK- 6535 /TE C Nonestab
7) Cleaning Rod Drg No SK 6574 TE[70]() Specification : Cleaning Rod Drg No. SK- 6574/ TE C Nonestab
8) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
9) Pin SK 6508 TE[70]() Specification : Pin SK- 6508 /TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]() Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle E Nonestab
2) MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256[70]() Specification : MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SEAR SAFETY ICR 1281 L F 7011606010[70]() Specification : AS PER DRAWING C Nonestab
2) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]() Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
224 LAXMI KONARK PRECISION TECHNIICS
SHED NO.11 B TYPE 1 I.E KUKATAPALLY HYDERABAD 500072 PRASHANTH NAGAR, KUKATPALLY HYDERERABAD Telangana
PIN1 : 500072
Phone No. : 23720276
GSTIN : 36AABFL6438L1Z0 		HYDL00611C

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CONVERSION FORG TO DRG NO 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR GAS PISTON C3009[00]() Specification : AS PER DRG OF CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009 C Nonestab
2) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Eliminator Flash() ICR - 1576 C Established
2) Conversion of Body() ICR 1325 C Established
3) Carrier Breech Block() ICR 1268 C Established
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]() Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL C Estab
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]() Specification : AS PER OFB REQ C Nonestab
2) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 REQ FOR AMR[70]() Specification : AS PER REQ C Nonestab
3) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 ST 2[70]() Specification : AS PER REQ C Nonestab
4) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]() Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001 C Nonestab
5) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]() Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL C Nonestab
6) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]() Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL C Nonestab
7) T SLOT BRACKET TO DRG NO 44P 05106ST[70]() Specification : AS PER OFT REQUIREMENT R Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]() Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL C Nonestab
9) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]() Specification : AS PER OFT REQUIREMENTS R Nonestab
10) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]() Specification : AS PER OFT REQUIRMENTS R Nonestab
11) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]() Specification : AS PER OFT REQUIREMENT R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]() Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.[42]() Specification : AS PER DRAWING NO 32P 5003. REQD FOR UBGL E Nonestab
2) DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL[42]() Specification : AS PER DRG NO 32P 5002. REQD FOR UBGL E Nonestab
3) MFG & SUPPLY OF SPRING LEVER LOCKING BARREL TO DRG NO.32P1008*5 FULLY FINISHED WITH FIRM'S MATERIAL REQUIRED FOR 40MM UBGL[70]() Specification : AS PER DRG NO.32P1008*5 E Nonestab
4) SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
5) SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
6) SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
7) SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
8) FORE SIGHT D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.[70]() Specification : AS PER D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED. C Nonestab
9) NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
10) SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL[70]() Specification : AS PER DRAWING C Nonestab
11) SCREW HOUSING LADDER SIGHT TO DRG NO.32P 1030*4 (FULL FINISHD) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]() Specification : AS PER DRAWING C Nonestab
12) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]() Specification : AS PER DRAWING C Nonestab
13) MFG & SUPPLY OF LEAF SPRING COCKING ARM TO DRG.NO.32P 4102 WITH FIRM'S MATERIAL FOR UBGL[70]() Specification : AS PER DRAWING C Nonestab
14) CATCH MAGAZINE TO DRG.NO: 29P 0045* required for 0.315[03]() Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle C Nonestab
15) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315[70]() Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle C Nonestab
16) SEAR TO DRG NO.29P 0060*2 required for 0.315[70]() Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle C Nonestab
17) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315[03]() Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle C Nonestab
18) HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315[70]() Specification : AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle C Nonestab
19) BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315[70]() Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle C Nonestab
20) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315[70]() Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle C Nonestab
21) BLADE FORE SIGHT 29P 0004* required for 0.315[70]() Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle C Nonestab
22) SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315[70]() Specification : AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle C Nonestab
23) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315[70]() Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle C Nonestab
24) SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315[70]() Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle C Nonestab
25) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315[70]() Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle C Nonestab
26) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315[00]() Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle C Nonestab
27) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
28) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
29) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No. K 2031 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 2031 WITH FIRM'S MATERIAL C Nonestab
30) SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL C Nonestab
31) DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL C Nonestab
32) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL C Nonestab
33) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL C Nonestab
34) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL C Nonestab
35) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL C Nonestab
36) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Nonestab
37) WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED[17]() Specification : AS PER DRG C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]() Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL C Estab
2) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]() Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL C Estab
3) SUPPLY OF REAR SIGHT LEAF[70]() Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL C Estab
4) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL E Estab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K 2025 C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No. K 2031 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG No. K 2031 WITH FIRM'S MATERIAL C Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Estab
3) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 2023 C Estab
4) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Estab
5) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]() Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL C Estab
2) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL C Estab
3) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL C Estab
4) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL C Estab
5) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Estab
6) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL C Estab
7) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]() Specification : AS PER DRG. NO. K 2012 C Estab
8) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]() Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle E Nonestab
2) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]() Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA C Nonestab
3) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]() Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]() Specification : AS ER DRG No.TEND 2508 (for K 1207) R Nonestab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]() Specification : AS PER DRG No.TEND :2509 (for K-1202) C Nonestab
3) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]() Specification : As per Drg. No.TEND 2517 (for K 2067) C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO TEND 2449STR2 WITH OFT RAW MATERIAL[70]() Specification : AS PER DRG NO.TEND 2449*2 WITH OFT RAW MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]() Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Block Gas to ICR 1322 with OFT material[70]() Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl C Nonestab
2) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]() Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]() Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470 C Nonestab
2) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MOUNTING RAIL for JVPC[70]() Specification : MOUNTING RAIL C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Barrel Extension Blank up to Stage V for JVPC[70]() Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452) C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BLOCK GAS IN FINISH CONDITION FOR MAG[70]() Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM) C Nonestab
2) Receiver Body for 9X19 mm Machine Pistol[70]() Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing C Nonestab
3) FEED TRAY INTEGRATED FOR LMG BELT FED[70]() Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
4) CYLINDER GAS FOR LMG BELT FED[70]() Specification : CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
5) Barrel Mount for 9X19 mm Machine Pistol[70]() Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing R Nonestab
6) Locking Rear Block for 9X19 mm Machine Pistol[70]() Specification : Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA C Nonestab
7) Rear sight for 9X19 mm Machine Pistol[70]() Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA C Nonestab
8) LATCH AS PER DRAWING NO SK 6519 TE[70]() Specification : LATCH AS PER DRAWING NO SK 6519 TE C Nonestab
9) SIGHT LEAF DRG No SK 6540 TE[70]() Specification : SIGHT LEAF DRG No SK-6540/TE C Nonestab
10) SLIDE DRG No SK 6534 TE[70]() Specification : SLIDE DRG No SK-6534/TE C Nonestab
11) LATCH DRG No SK 6535 TE[70]() Specification : LATCH DRG No SK- 6535 /TE C Nonestab
12) Cleaning Rod Drg No SK 6574 TE[70]() Specification : Cleaning Rod Drg No. SK- 6574/ TE C Nonestab
13) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3[70]() Specification : MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256[70]() Specification : MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SEAR SAFETY ICR 1281 L F 7011606010[70]() Specification : AS PER DRAWING C Nonestab
2) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]() Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
225 SHANTI ARMS-TECH PRIVATE LIMITED
W-23 MIDC Industrial Area Hingna Nagpur Maharashtra
PIN1 : 440016
Phone No. : 234510
GSTIN : 27AACCS2137B1ZU 		NGPS00629G

Download 		1) Small Arms Factory
Name Specification Use Status
1) SMALL ARMS COMPONENTS REQUIRE TURNING, MILLING, DRILLING & GRINDING OPERATIONS() AS PER DRAWING C Estab.
2) SEAR FOR LMG & RIFLE 5.56MM() AS PER DRG. C Non Established
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385 Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385() Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a) C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN() CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241 -A,DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC- C Not Estab
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN[63]() CQA (A) DRG.NO.bw.3.140.039.cb/c, DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC- C Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PYRO DELAY TUBE EMPTY LF 9911358384[99]() Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) VALVE FOR HEAT-551() DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 C NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) VALVE FOR HEAT-551[99]() Specification : DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 R Estab
2) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]() Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.N C Estab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Nonestab
4) ASSEMBLY OF S&A (EMPTY) COMPONENTS FOR FUZE FB-40 OF 40 MM PFFC AMMN. (9911357765)[99]() Specification : AS PER SPECIFIED DRG. & SPECIFICATION C Estab
5) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]() Specification : MANTLE TO DRG.NO.TRD-2-2-2271. C Estab
6) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]() Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242. C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) VALVE FOR HEAT-551[99]() Specification : DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 C Estab
2) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]() Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED. C Nonestab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Nonestab
4) ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765)[99]() Specification : ASSEMBLY OF S&A (EMPTY) COMPONENTS,CONSISTING OF FOLLOWING COMPONENTS AS PER ATTACHED LIST.NOTE- QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL.ATTACHED.ENCL.-2 C Nonestab
5) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]() Specification : MANTLE TO DRG.NO.TRD-2-2-2271. C Nonestab
6) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]() Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242. C Estab
7) EMPTY FUZE B-25M TO DRG.TRD-1778 (9911357354)[99]() Specification : EMPTY ASSY.FUZE 25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CASE: DRG.9-04367/9- -104/ 38.310. 032[63]() Specification : CASE: DRG.9-04367/9- -104/ 38.310. 032, DC.NO.36309-A, DT.14.07.97. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Butt Assembly drg .no. 1005-000835 for Carbine 9mm[70]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Device for loading & unloading of Cartridge Belts Assy() 6CH16CBCB C Not Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750() Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Nonestab
2) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]() Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932 C Nonestab
3) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]() Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0 C Nonestab
4) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]() Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/ C Nonestab
5) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]() Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/ MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC LF 9911358194[99]() Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) DISC: DRG.9-04367/9- -104/ 38.366. 113[63]() Specification : DISC: DRG.9-04367/9- -104/ 38.366. 113, DC.NO.36309-A, DT-14.07.97. C Nonestab
2) SLEEVE:DRG.9-04367/9- -104/ 38.316[63]() Specification : SLEEVE:DRG.9-04367/9- -104/ 38.316 .101,DC.NO.37514-A, DT.18.02.19 C Nonestab
3) BODY TO DRG.NO.9-04367/9- -104/ 38.300.150[63]() Specification : BODY TO DRG.NO.9-04367/9- -104/ 38.300.150, DC NO.36396-A DT-21.03.98. C Nonestab
4) CUP: DRG.9-04367/9- -104/ 38.350. 189[64]() Specification : CUP: DRG.9-04367/9- -104/ 38.350. 189,DC.NO-36309-A,DT.14.07.97 C Nonestab
5) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]() Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)- C Nonestab
6) DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A[63]() Specification : DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A,DT-21.04.2003(THICKNESS:0.07MM + 0.012) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) DISC TO DRG.NO.2-013535[62]() Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) WASHER FOR FUZE DA 5A[65]() Specification : DRG.NO.QX176 FD-650, DC-35781-A DT.22.08.94. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CAP KG 4 FOR A30 T DETONATOR[65]() Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10 C Nonestab
2) SQUIB EMPTY[63]() Specification : SQUIB EMPTY: ERDL DRG.971,DET NO.05 DT:10.10.88 C Nonestab
3) CUP YA 5 FOR A30 T DET[65]() Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856,DCNO.37271-A,DT.08.11.10. C Nonestab
4) CAP TO DRG NO ARM 1172 A26[62]() Specification : CAP TO DRG. NO.ARM 1172 A26DT.24-11-79 C Nonestab
5) CUP Y1 3[64]() Specification : 6410120650 CUP Y1-3 -[IGNITING PRIMER MG-8] TO DESIGNER REF NO. CQA (A)/AMN/2855.DC NO.37271-A DT.08.11.10 SCANNED DT. 05.01.2011 HEIGHT SHOULD BE FROM 1.30MM TO 1.40MM OUTSIDE DIAMETER SHOULD BE 2.35MMTO 2.38MM. NOTE: - EDGES SHOULD B C Nonestab
6) CAP K3 2[64]() Specification : 6410120620 CAP K3-2 [IGNITING PRIMER MG-8] TO DESIGNER REF. NO. CQA(A)/AMN/2854.DC NO.37271-A, DT.08.11.10 SCANNED ON DT.05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SH C Nonestab
Category :
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]() Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00 C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]() Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00 C Estab
2) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]() Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982 C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) VALVE PART NO 404038806 LF 9911358407 Description : VALVE PART NO 404038806 LF 9911358407() Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547 R Nonestab
Category : p
Grade : 3
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.[99]() Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249. C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.[99]() Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249. C Nonestab
2) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]() Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982 R Nonestab
3) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).[70]() Specification : AS PER DRG. NO. TEND 1692* (ICR 1576) C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.[70]() Specification : AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED. R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF BAYONET 2A WITH SCABBARD BAYONET 1A.TO DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED[70]() Specification : AS PER DRG DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED E Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO K 4110 WITH FIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS[70]() Specification : FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DIA C Nonestab
2) PLUG GAS CYLINDER[79]() Specification : PLUG GAS CYLINDER FOR RIFLE 5.56MM INSAS, DS CAT NO-1005-007749 (DC-26520-SA)) C Nonestab
3) BLANK FOR STUD CHANGE LEVER .[79]() Specification : BLANK FOR STUD CHANGE LEVER TO RFI SK.7017-S (DC-NILDT.12/9/2001). FOR RIFLE 5.56 MM INSAS.TP OF MATL. TO BEBLANK CARBURISED TO ACHIEVE MECHANICAL PROPERTIES OF BASICMATL.& TO ACHIEVE 400-475 HV AFTER H&T.GRAIN SIZE TO CONFORMASTM 5 TO 8 & C Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name Specification Use Status
1) FLASH ABSORBER FOR RIFLE 5.56MM INSAS (WITHOUT PHOSPHATING)[79]() Specification : FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2F C Nonestab
2) BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE (GHAATAK) [70]() Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1 C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]() Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]() Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156[99]() Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
2) BODY SUB ASSEMBLY TO SK NO.OTE/SE/010 INF/C[62]() Specification : AS PER DRG. & SPECIFICATION C Nonestab
3) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]() Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]() Specification : AS PER DRAWING C Nonestab
2) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]() Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
2) Plug Representing Fuze in FC TO DRG NO M 10394[60]() Specification : As per drg. no. M-10394 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) HOUSING OG TO DRG NO. CWC/229/1[74]() Specification : HOUSING OG TO DRG NO. CWC/229/1 C Nonestab
Category : p
Grade : Grade III
Size : S
1) High Explosive Factory
Name Specification Use Status
1) FILLING HOLE PLUG[10]() Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 SA DC 35817-A SPECN. NO. CQA(A) 1504(E) DC 35870 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUSE T & P 213 MK 5 (M-R) (EMPTY) TO DRG. NO.ARDE 2020 DET.1. DT.7.3.90. SPECN NO ARDE/SPECN/440 AND 441.[99]() Specification : ARDE/SPECN/440 AND 441 C Nonestab
2) FUZE YDB-60 ASSEMBLY (EMPTY) ;DRG. NO.NAI(P) SK 284[60]() Specification : DRG. NO.NAI(P) SK 284 C Nonestab
3) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009[60]() Specification : DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009 C Nonestab
4) GENERAL ARRANGEMENT FUZE K3M HE/PRACTICE EMPTY TO DRG NO.NAI ((P) SKETCH - 324 DT. 22.11.2012 ASSEMBLED CONDITION.[60]() Specification : DRG NO.NAI ((P) SKETCH - 324 DT. 22.11.2012 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.[00]() Specification : TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN. C Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN.[00]() Specification : TRIPOD SUPPORT TO DRG NO. AFK/SK-628-09 FOR 40 MM MGL AMMN. C Nonestab
2) SLIDE SHOE TO OFAJ DRAWING NO FS 3024[00]() Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024 C Nonestab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.[00]() Specification : SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN. C Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN[00]() Specification : MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN C Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CONVERSION OF BOAT TAIL FORGING[00]() Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Estab
2) ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT[00]() Specification : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT C Estab
Category : ddp
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TIMER ASSEMBLY TO DRG.NO. 8801 00 01 01 06 000 00 TA DT.14-12-99, SPECN. ARDE/SPECN/604/1998 .[61]() Specification : ARDE/SPECN/604/1998 . C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TAIL UNIT 1A DES. REF. NO. CIA/AMN/794 PT.NO. ITV-8A SPECN. NO. CQA(A)2308[60]() Specification : CQA(A)2308 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO.AFK/SK-215-05. dt. 13.09.2011[6099990404]() Specification : DRG.NO.AFK/SK-215-05. dt. 13.09.2011 C Nonestab
2) PLUG REPRESENTING FUZE DA5A AS PER ARDE DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285[63]() Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FRAGMENTATION SLEEVE FOR ROUND 40 MM MGL AS PER DRG. NO. AFK-SK 208/05 DT.07-10-2005. SHT.1 & 2[60]() Specification : DRG. NO. AFK-SK 208/05 DT.07-10-2005. SHT.1 & 2 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYROCARTRIDGE YDP 4-2 ASSEMBLY AS PER DRG. NO. NASK 1016 ( PROVISIONAL ) DT. 02.12.2008 (BASED ON OLD DRG.NO.NAI(MB)9549 DT.14-05-1999)[60]() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) C Nonestab
2) PYRO CARTG.YDP 3-3 TO DRG. NO. NASK 995 (PROV) DT.02.12.2008[6099991225]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
3) PYRO CARTG.YDP 1-3 TO DRG. NO. NASK 994 (PROV) DT.03-07-2008[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
4) SET OF COMPONENTS FOR PYRO CARTRIDGE PC 100 DRG ERDL 898 (1) BODY-ERDL-898 DET1 (2) SQUIB PLUG BRIDGED - ERDL 897 DET. NO. 9 3) CUP - ERDL 897 DET. NO. 3, 4) RING - ERDL .NO. 897 DET.NO.2, 5) SCREW - ERDL 897 DET.NO.5, 6) SLEEVE - ERDL 897 DET4 7)CLOSING PLUG ERDL 897 DET 6 LATEST FOR OF MEDAK.[60]() Specification : DRG ERDL 898 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CLOSING DISC TO DRG NO ERDL DRG. 1005 DET NO.8 DT 19.11.09[99]() Specification : DRG NO ERDL DRG. 1005 DET NO.8 DT 19.11.09 C Nonestab
2) CLOSING DISC TO DRG.NO.ERDL DRG.1005 DET NO 3 DT.19.11-09.[99]() Specification : DRG.NO.ERDL DRG.1005 DET NO 3 DT.19.11-09 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY TO DRG.NO.ERDL DRG. 959 DET NO.1 DT.11 NOV 86.[9910140185]() Specification : DRG.NO.ERDL DRG. 959 DET NO.1 DT.11 NOV 86 C Nonestab
2) CUP TO DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009[9910141615]() Specification : DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009 C Nonestab
3) LID TO DRG.NO. ERDL DRG 1005 DET NO.7 DT.19.11.09.[99]() Specification : DRG.NO. ERDL DRG 1005 DET NO.7 DT.19.11.09 C Nonestab
4) COMPONENTS FOR CARTG.TRAINING 81 MM & 120 MM MORTAR BOMB . COVERING DISC TO REF.DRG.NO.ARDE 1925 DET.NO.5 PART NO.IRW- 172 DC-34523 A.[60]() Specification : DRG.NO.ARDE 1925 DET.NO.5 PART NO.IRW- 172 C Nonestab
5) WASHER AS PER DRG.NO. ARDE/2078 DETAIL NO. 8 DT.27-8-87.[60]() Specification : DRG.NO. ARDE/2078 DETAIL NO. 8 DT.27-8-87. C Nonestab
6) IGNITER SA-40 EMPTY ASSY. CONSISTING OF 1)BODY(CONTAINER) TO DRG.NO. NASK 776/9/1/1/1 (PROVISIONAL)DT. 13-5-04 QTY.1 NO. 2)DISC TO DRG NO.NASK 776/9/1/1/2 (PROVISIONAL) DT. 29-5-01 QTY 2 NOS 3) BODY (LID) TO DRG NO. NASK 776/9/1/2/1 (PROVISI ONAL) DT.29-1-04 QTY 1NO.[60]() Specification : 1)BODY(CONTAINER) TO DRG.NO. NASK 776/9/1/1/1 (PROVISIONAL)DT. 13-5-04 QTY.1 NO. 2)DISC TO DRG NO.NASK 776/9/1/1/2 (PROVISIONAL) DT. 29-5-01 QTY 2 NOS 3) BODY (LID) TO DRG NO. NASK 776/9/1/2/1 (PROVISI ONAL) DT.29-1-04 QTY 1NO. C Nonestab
7) 1) CONTAINER DRG. NO. NAI(V) 8216/1 QTY. 1 NO.DT. 30.05.2008 2) LID DRG. NO. NAI (V) 8216/2 PROV. QTY 1 NO DT.30.05.2008 3) DISC DRG. NO. NAI(V) 8216/3 PROV.QTY.2 NO. DT. 30.05.2008[60]() Specification : DRG. NO. NAI(V) 8216/1 QTY. 1 NO.DT. 30.05.2008 2) LID DRG. NO. NAI (V) 8216/2 PROV. QTY 1 NO DT.30.05.2008 3) DISC DRG. NO. NAI(V) 8216/3 PROV.QTY.2 NO. DT. 30.05.2008 C Nonestab
8) PRIMER EMPTY D.C. MK VIII TO DRG.NO. MD SK 1208/7 DT.14.12.1964.[63]() Specification : DRG.NO. MD SK 1208/7 DT.14.12.1964. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY OF PROJECTILE TO CQA[A] SEALED DRG NO. 04-749-130222- 01.1E[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
2) INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E[6078020202]() Specification : CQA[A] SEALED DRG NO 04-749-130222-02.1E C Nonestab
3) IGNITER CASING TO CQA(A) SEALED DRG NO 04-749-130222-03.1E[6078020205]() Specification : CQA(A) SEALED DRG NO 04-749-130222-03.1E C Nonestab
4) SMOKE COMPOSITION CASING TO CQA[A] SEALED DRG NO 04-749- 130222-05.1E[6078020212]() Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E C Nonestab
5) IGNITION ELEMENT (EMPTY) TO DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A[6078020220]() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A C Nonestab
6) IGNITION ELEMENT DRG.NO. 04-44-79000-06105-4E[9910141572]() Specification : DRG.NO. 04-44-79000-06105-4E C Nonestab
7) CASE (C.E.R.U.NO 204 MK 2) TO DRG NO ARDE/2165 DETAIL 2. DT.28-9-92 SPECN.ARDE/SPECN/423[6099990023]() Specification : SPECN.ARDE/SPECN/423 C Nonestab
8) CSE FOR H4HA SEAT OF HJT 16 A/C(IND) CONSIST OF (EMPTY ASSY. -AS PER ATTACHED LIST 1) CSE PRI. DRG. ARDE: 1460/1 CASE,WASHER & DISC, RING SEALING, DISC 2) CSE SEC. ARDE:1765/1 CUP & SUPPORT, COVER & DISC, RING SEALING 3) CSE DROGUE DRG. ARDE 1657/1-CASE,DISC, WASHER[6099990296]() Specification : 1) CSE PRI. DRG. ARDE: 1460/1 CASE,WASHER & DISC, RING SEALING, DISC 2) CSE SEC. ARDE:1765/1 CUP & SUPPORT, COVER & DISC, RING SEALING 3) CSE DROGUE DRG. ARDE 1657/1-CASE,DISC, WASHER C Nonestab
9) CUP FOR IGNITER EB-2 DRG NO. AFK/SK-341-06 DT.02.02.2006[6099990422]() Specification : DRG NO. AFK/SK-341-06 DT.02.02.2006 C Nonestab
10) CASE TO DRG.NO. ARDE/1508 DET 2 DT. 12-12-88 SPECN : ARDE/ SPECN/221.[6099991352]() Specification : SPECN : ARDE/ SPECN/221 C Nonestab
11) SLEEVE FOR 40MM AMMN. AS PER DRG. NO. AFK/SK-214/05. DT. 27.01.2015[6099999017]() Specification : DRG. NO. AFK/SK-214/05. DT. 27.01.2015 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HOUSING DELAY DES REF NO. IA 1899 SHEET NO 2, PT NO. ITX 59 SPECN: CQA(A)1804[6141701500]() Specification : CQA(A)1804 C Nonestab
2) CAP TO DRG NO ARDE 1933 DETAIL NO.13,PART NO ITV 184 SPECN NO. CQA(A) 2324[6040541048]() Specification : CQA(A) 2324 C Nonestab
3) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD(L) 11855, PT NO TV 44, SPECN NO. CQA(A) 2351[6041300500]() Specification : CQA(A) 2351 C Nonestab
4) FIRING PIN TO CQA[A] SEALED DRG NO.04-749-130222-03.2E[6078020208]() Specification : CQA[A] SEALED DRG NO.04-749-130222-03.2E C Nonestab
5) SPACER RING TO CQA[A] SEALED DRG.NO. 04-749-130222-03.4E[6078020210]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E C Nonestab
6) SLUG FOR CASE TO AFK, DRG NO.AFK/PJ/SK-56[6078020219]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
7) CENTER PIECE (MODIFIED) FOR GRENADE HAND 36M SIMULATOR ATS.. DRG.NO. AFK/SK/798-14[6099999079]() Specification : DRG.NO. AFK/SK/798-14 C Nonestab
8) STRIKER DES REF NO CIA/AMN/1799 DET NO 3 PART NO ITW-65 SPECN NO CQA(A) 1504[6140600400]() Specification : CQA(A) 1504 C Nonestab
9) CENTRE PIECE DES REF NO CIA/AMN/1799 DET NO. 2 PT NO ITW 64 SPECN CQA(A) 1504[6140600800]() Specification : CQA(A) 1504 C Nonestab
10) RETAINING PIN & RING DES REF NO CIA/AMN/1799 DET NO 6 PART NO ITW 10 SA, SPECN.NO CQA(A) 1504[61]() Specification : CQA(A) 1504 C Nonestab
11) HOUSING PRIMER [ALUMINIUM ALLOY] DESIGN'S REF.CQA(A)/AMN/ 1521 PT. IQX 524 SPECN CIA 1803[6335802100]() Specification : CIA 1803 C Nonestab
12) PLUNGER DRG. NO. 04-44-79000- 06111-4 E[6381210300]() Specification : DRG. NO. 04-44-79000- 06111-4 E C Nonestab
13) PLUNGER GUIDE 04-44-79000-06112-4 E[6381210400]() Specification : DRG NO.04-44- 79000-06112-4 E C Nonestab
14) CHARGE DEMOLITION NO 1, 152.4MM MK-5/L (GENERAL ARRANGEMENT) BEEHIVE, EMPTY,DRG NO IA 572/1,5 DETAILS,PART NO ITX 15 GE, SPECN NO CQA 0511[6432501000]() Specification : CQA 0511 C Nonestab
15) FIRING BOLT TO CQA[A] SEALED DRG.NO. 04-749-130222-04.1E[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-04.1E C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) DETONATOR PLUG DRG.NO.ARM/1109 A2 SPECN: DTD&P (AIR)/5/62/ARM[64]() Specification : DTD&P (AIR)/5/62/ARM C Nonestab
2) HEAD DRG. NO. ARM-1109-A4 SPECN:DTD&P(AIR)/5/62/ARM[6411420020]() Specification : DTD&P(AIR)/5/62/ARM C Nonestab
3) DETONATOR PLUG DRG. NO. ARM/1138 A2 DT.19/3/96 SPECN: AIR 1296 A[6411150010]() Specification : SPECN: AIR 1296 A C Nonestab
4) HEAD DRG. NO. ARM 1138 A3 DT.19-3-96.[K26411150220]() Specification : DRG. NO. ARM 1138 A3 DT.19-3-96 R Nonestab
5) PLUG ARM/1225 A-4 DT.18.11.2005 SPECN. AIR 304-L[6412800200]() Specification : SPECN. AIR 304-L C Nonestab
6) HEAD DRG. NO. ARM/1225 A-3 DT. 18.11.2005 SPECN: AIR 304-L[6412810200]() Specification : SPECN: AIR 304-L C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) INNER CASING AND OUTER CASING[60]() Specification : 1) INNER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI(V) 8015/1 (PROV) 2) OUTER CASING (IGNITER FOR AFT MOTOR) DRG.NO.NAI (V) 8015/2 (PROV) C Nonestab
2) BODY AND CUP[6099990343]() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. C Nonestab
3) BOOSTER CHARGE 130.02.016 M.EMPTY[6099990429]() Specification : DRG NO.NAI(V) 7001 (PROV) DT. 23.07.2004 EXCEPT. ITEM NO. 1 CASING TO DRG. NO. NAI - 7001/1 DT 23.07.2004 C Nonestab
4) GRID DRG.NO. ARDE/150S PK16[6099991350]() Specification : SPECN-ARDE/SPECN/221 C Nonestab
5) DELAY HOLDER ARDE/2078[9910141565]() Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20 C Nonestab
6) INSULATOR TO DRG.NO.ARDE 2078/32[99]() Specification : SPECN ARDE/SPECN/415 C Nonestab
7) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
8) HOUSING (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK/SK-347-06 C Nonestab
9) BOOSTER CARTG ASSY EMPTY[60]() Specification : DRG.NO. AFK/SK-014-03 DT.27.12.12 C Nonestab
10) BODY TO DRG.ARDE 2078/30 DT.27/8/87[99]() Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20. C Nonestab
11) CONTACT TO DRG.ARDE 2078/31.27.8.87[99]() Specification : ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 2O. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENT FOR PYRO SQUIB OPERATOR (II 3-253-M5) CONSISTING OF 6 COMPONENTS.1) BODY 2) GASKET 3)SLEEVE-I (4) SLEEVE II (5)SPACER (6) CUP TO DRG .NO. NASK--- 1089/1 (PROV.)[6099990159]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
2) COMPONENTS FOR SQUIB PSQ-6 CONSISTING 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG.NO. PTA-L-54-01-01-103-X[6099990236]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
3) SQUIB HOLDER TO DRG. NO. AFK/SK-334-06 FOR IGNITER EB-1 DT.2-2-2006][6099991378]() Specification : DRG. NO. AFK/SK-334-06 R Estab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SRCR (EMPTY BODY)[60]() Specification : DRG NO. NASK 828/1.( PROV ) DT.27.7.2000 R Nonestab
2) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV)[61]() Specification : DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011 R Nonestab
3) 105 MM MRIR EMPTY[61]() Specification : DRG. NO. NASK DRG.NO.989 C Nonestab
4) 105 MM LRIR EMPTY[61]() Specification : DRG.NO. NASK 987 DT.20.04 .15 C Nonestab
5) 105MM LONG RANGE CHAFF ROCKETS (LRCR)[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
6) A/S ROCKET RGB-60 EMPTY.[60]() Specification : DRG. NO. NASK 1061 (PROV) C Nonestab
7) A/S ROCKET RGB-12 PRACTICE (EMPTY)[60]() Specification : DRG. NO. NAI(V) 8200 (PROV) DT.11.11.2013 C Nonestab
8) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 105 MM MRIR EMPTY[61]() Specification : DRG. NO. NASK DRG.NO.989 C Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]() Specification : CQA (A) 2316 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BANGALORE TORPEDO SECT 38MM 2M EMPT 6430200100[64]() Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91 C Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE MINE COMB M605 ASSEMBLY EMPTY[63]() Specification : CQA(A) 1803 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) LINER SCREW FOR HEAT-551() DRG.NO. 5209558 C Estab
2) SET OF BOOSTER CUP & PIN FOR HEAT-551() AS PER SPECIFIED DRG. C Estab
3) SPACER FOR HEAT-551() DRG.NO. TRD-2-2-2273 C Estab
4) SHELL BODY() DRG.NO. F1321-309540-C DC NO. 35561-A DT. 23/8/93 C Nonestab
5) BASE() DRG.NO. F1321-309510-C (WHITE CONDITION ONLY) DC NO. 35561-A DT. 23/8/93 C Estab
6) LINER() DRG.NO. F1321-310180-B DC NO. 35561-A DT. 23/8/93 C Estab
7) TOP SCREW() DRG.NO. F1321-439150-C DC NO. 36534-A DT. 6/3/99 C Estab
8) SUPPORTING RING() DRG.NO. F1321-309570-D DC NO. 35561-A DT. 23/8/93 C Estab
9) BASE SCREW() SPECN: F1301-910070-E DC(I) 33513-A (CIA-4911) DT. 18/10/82 DRG.NO. F1321-204530-E DC (I) 36534-A DT. 6/3/99 C Estab
10) ROTOR() AQL TABLE SPECN: F-1301-902580 DRG.NO. F1301-044524-H DC(I) 36534-A DT. 6/3/99 C Estab
11) SAFETY PIN() DRG.NO. F1301-050620-H DC-36534-A DT. 6/3/99 C Estab
12) SAFETY PIN SPRING() DRG.NO. F1301-044550-E DC NO. 36534-A DT. 6/3/99 C Estab
13) SAFETY PLUNGER() DRG.NO. F1301-044563-A DC NO. 35157-A DT. 19/8/91 C Estab
14) ROTOR HOUSING() DRG.NO. F1301-044502-E DC(I) 36534-A DT. 6/3/99 C Estab
15) BAR() SPECN: F-1301-902840-B DT. 14/6/85 DRG.NO. F1301-050950-D DC(I) 35049-A DT. 14/3/91 C Estab
16) CONTACT CASING() AQL TABLE SPECN: F1301-902530-B DT. 5/5/81 DRG.NO. F1301-044480-E DC-36534-A DT. 06/3/99 C Estab
17) CONTACT SPRING() SPECN: F-1301-902540-B DT. 22/11/85 DRG.NO. F1301-044490-E DC(I) 36534-A DT. 06/3/99 C Estab
18) CAP() AQL TABLE SPECN: F1301-902520-D DT. 13/5/81 DRG.NO. F1301-044471-B DC 36794-A DT. 23/11/01 C Estab
19) FUZE BASE() DRG.NO. F1321-309410-F DC(I) 36534-A DT. 06/3/99 C Estab
20) BALANCE BODY() AQL TABLE SPECN: F1301-902630-A DT. 20/2/68 DRG.NO. F1301-050790-D DC 36534-A DT. 06/3/99 C Estab
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) AFT CLOSURE INSULATOR (HEAT-551) (9911357864)[99]() Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243. C Estab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) FELT DISC Description : FELT DISC() Specification : DRG. NO. 6387488, DC NO. 36569-A DT. 22.06.99 C Estab
Category : p
Grade : 2
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
2) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
3) HINGE COVER FOR SMALL ARMS Description : HINGE COVER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) GUARD TRIGGER FOR INSAS 5.56 MM Description : GUARD TRIGGER FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
5) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
6) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. Description : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.() Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. C Estab
7) Bayonet No. 5 MK-1 DS CAT No. 1005-000951 Description : Bayonet No. 5 MK-1 DS CAT No. 1005-000951() Specification : AS PER DRG. C Estab
8) Trigger Assy. DS CAT No. 1005-006589 Description : Trigger Assy. DS CAT No. 1005-006589() Specification : AS PER DRG. C Estab
9) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
10) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56() Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR) C Estab
11) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY Description : CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY() Specification : CQA (A) 2348 R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301047062E DC36160 A DT 31 08 96[00]() Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NOZZEL TO ARDE DRG NO 1135 DET 10[00]() Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6043000122 ADAPTER TUBE ASSY 81MM PWP, ITV 12A[60]() Specification : SPECN. NO. CQA(A) 2335 C Nonestab
2) 6044000600 TAIL UNIT 2A[60]() Specification : SPECN NO. CQA(A)2342 C Nonestab
3) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]() Specification : SPECN.NO. CQA(A) 0917 C Nonestab
4) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]() Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP. C Nonestab
5) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]() Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6043000122 ADAPTER TUBE ASSY 81MM PWP, ITV 12A[60]() Specification : SPECN. NO. CQA(A) 2335 C Nonestab
2) 6044000600 TAIL UNIT 2A[60]() Specification : SPECN NO. CQA(A)2342 C Nonestab
3) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]() Specification : SPECN.NO. CQA(A) 0917 C Nonestab
4) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]() Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP. C Nonestab
5) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]() Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A C Nonestab
6) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]() Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]() Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E C Nonestab
2) CAP TO OFAJ DRG NO FS 1160A[00]() Specification : CAP TO OFAJ DRG.NO. FS-1160A C Nonestab
3) HEAD WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2936 OR LATEST AMENDED DRG AND SPECN AS ON TE DATE[00]() Specification : HEAD (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWING NO.FS-2936 OR LATEST AMENDED DRG. AND SPECN AS ON T.E. DATE. C Nonestab
Category : p
Grade : Grade III
Size : S
226 SWATHIS INDUSTRIES
PLOT NO.96 SUBASHNAGAR LANE, NEAR SRI AAYEE MATA TEMPLE, I.D.A JEEDIMITLA, HYDERABAD, TELANGANA
PIN1 : 500055
Phone No. : 04023090232
GSTIN : 36AEZPB9631B1ZD 		HYDR06851F

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028() AS PER DRG.& SPECIFICATION C NOT ESTAB.
2) Valve to Drg. no.A.O.18.03.010() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : I
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MAGAZINE ASSY. TO DRG. NO. 0204-03-03-00-07-000-00DA for JVPC() AS PER DRG. C Not Estab.
Category : P
Grade : II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BIPOD ASSEMBLY (GUN MOUNT) COMPLETE TO DRG. F1303-028700 IN FINISHED CONDITION DC NO. 19047 W DT. 02.05.07[71]() Specification : BIPOD ASSEMBLY (GUN MOUNT) COMPLETE TO DRG. F1303-028700 IN FINISHED CONDITION DC NO. 19047 W DT. 02.05.07 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) GLAND[74]() Specification : AS PER DRAWING C Estab
2) GASKET[74]() Specification : AS PER DRAWING C Estab
3) GASKET[74]() Specification : AS PER DRAWING C Estab
4) SPACER[74]() Specification : AS PER DRAWING C Estab
5) SPACER[74]() Specification : AS PER DRAWING C Estab
6) GASKET[74]() Specification : AS PER DRAWING C Estab
7) GASKET[74]() Specification : AS PER DRAWING C Estab
8) GASKET[74]() Specification : AS PER DRAWING C Estab
9) GASKET[74]() Specification : AS PER DRAWING C Estab
10) WASHER[74]() Specification : AS PER DRAWING C Estab
11) GASKET[74]() Specification : AS PER DRAWING C Estab
12) GASKET[74]() Specification : AS PER DRAWING C Estab
13) GASKET[74]() Specification : AS PER DRAWING C Estab
14) GASKET[74]() Specification : AS PER DRAWING C Estab
15) GASKET VISOR IG46[74]() Specification : AS PER DRAWING C Estab
Category : p
Grade : Grade I
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) SHOCK ABSORBER TO DRG NO. B11-5.121 (LF:7440101208)[74]() Specification : AS PER DRAWING C Estab
2) GLAND FOR GYRO STABILIZER TO DRG NO. AL8.233.379 (LF:7440202660)[74]() Specification : AS PER DRAWING C Estab
3) GASKET FOR BLOCK BPV-29 TO DRG NO. BPV29.104 (LF:7440901247)[74]() Specification : AS PER DRAWING C Estab
4) GASKET BPV29.112 (LF:7440901249)[74]() Specification : AS PER DRAWING C Estab
5) KNOB (PUSH BUTTON) AS PER DRG NO. BPV29.280 (LF:7441120233)[74]() Specification : AS PER DRAWING C Estab
6) RING FOR BLOCK BPV-29 TO DRG NO. PYU150.005 (LF:7445601236)[74]() Specification : AS PER DRAWING C Estab
7) COVER AF8057112 (LF:7524010112)[75]() Specification : AS PER DRAWING C Estab
8) PLASTIC MOULD HEAD REST AS PER DRG NO. BSH6.548.037 (LF:7582500001)[75]() Specification : AS PER DRAWING C Estab
9) EYE GUARD TO DRG. NO. AL8647015 (LF:9927063762)[99]() Specification : AS PER DRAWING C Estab
Category : p
Grade : Grade I
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) GASKET[90]() Specification : AS PER DRAWING/SPECIFICATION C Nonestab
2) SAFETY BELT (FOR MPV)[90]() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G C Estab
3) GASKET TUBELIGHT MOUNTING[90]() Specification : GASKET TUBELIGHT MOUNTING DRG. NO. HULL/MPV/103 C Nonestab
4) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
5) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
6) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
7) BOSS M12x22x25 OST 3 1496 72[90]() Specification : BOSS M12x22x25 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) PULLEY SWC VTS[90]() Specification : PULLEY-SWC (VTS) DRG./PART NO. X-1501515 SAHE C Nonestab
10) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
11) PIN[90]() Specification : PIN DRG NO 610-11-1032-1/A MATERIAL -EN24 BS 970 C Nonestab
12) Eye 765 58 193 A[90]() Specification : Eye 765-58-193/A C Estab
13) BELT ASSEMBLY[90]() Specification : BELT ASSEMBLY DRG NO. 765-50-CD 1043 C Nonestab
14) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
15) HANDLE ASSY 675 50 CB301[90]() Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301 C Nonestab
16) BUSH 765 58 312 A[90]() Specification : BUSH DRG. NO. 765-58-312-A C Nonestab
17) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Nonestab
18) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
19) CIRCLIP A14X1 IS 3075[90]() Specification : CIRCLIP A14X1 IS:3075 C Nonestab
20) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L C Estab
21) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L C Estab
22) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Nylon Strap 100 mm[90]() Specification : As per specification / drg. C Nonestab
2) Nylon Strap 150mm[90]() Specification : As per specification / drg. C Nonestab
3) Nylon Strap 220 mm[90]() Specification : As per specification / drg. C Nonestab
4) Pad[90]() Specification : As per specification / drg. C Nonestab
5) Rubber Bush[90]() Specification : As per specification / drg. C Nonestab
6) Rubber Packing for Bracket[90]() Specification : As per specification / drg. C Nonestab
7) Rubber Packing for Strap[90]() Specification : As per specification / drg. C Nonestab
8) Rubber Pad[90]() Specification : As per specification / drg. C Nonestab
9) Rubber Washer[90]() Specification : As per specification / drg. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOSS M20 BY 25 OD 30L Description : BOSS M20 BY 25 OD 30L() Specification : BOSS M20 X 25 (OD) X 30L C Estab
2) BOSS M6 OD 20 16 L Description : BOSS M6 OD 20 16 L() Specification : BOSS M6XOD(20)X16L C Estab
3) BOSS M8 20 OD 20 L Description : BOSS M8 20 OD 20 L() Specification : BOSS M8X20(OD)X 20L C Estab
4) BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV. Description : BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV.() Specification : BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV. C Estab
5) Bush Gost Std Bar Description : Bush Gost Std Bar() Specification : Bush Gost Std./ Bar Drg No. 765-58-312/A C Estab
6) CASTING FOR BODY FOR TURRET ASSY. STEEL 40X GOST 977-75 Description : CASTING FOR BODY FOR TURRET ASSY. STEEL 40X GOST 977-75() Specification : 40X GOST 977-75 C Estab
7) Casting for Bracket for Turret Assy. Description : Casting for Bracket for Turret Assy.() Specification : Casting for Bracket for Turret Assy. C Estab
8) CASTING FOR COMMANDER RING Description : CASTING FOR COMMANDER RING() Specification : CASTING FOR COMMANDER RING C Estab
9) CATCH OBLIQUE HOOK STEEL IS 4365 79 Description : CATCH OBLIQUE HOOK STEEL IS 4365 79() Specification : CATCH/HOOK STEEL IS:4365-79 (LF No. 9013193393000) C Estab
10) EYE Description : EYE() Specification : EYE DRG. NO. 765-58-193/A C Estab
11) Handle Gost Std Description : Handle Gost Std() Specification : Handle Gost Std. (Handle Blank) C Estab
12) HINGE GOST STD Description : HINGE GOST STD() Specification : HINGE GOST STD 765-58-211 C Estab
13) Hinge Driver Hatch Assembly forging Description : Hinge Driver Hatch Assembly forging() Specification : Hinge (Driver Hatch Assembly) forging C Estab
14) HOOK PART NO 675 57271 A Description : HOOK PART NO 675 57271 A() Specification : HOOK PART NO 675-57-271/A C Estab
15) LEVER CONTROL HAND/TORSION BAR Description : LEVER CONTROL HAND/TORSION BAR() Specification : LEVER CONTROL HAND C Estab
16) FORGING FOR PIVOT FOR TURRET ASSY. Description : FORGING FOR PIVOT FOR TURRET ASSY.() Specification : FORGING FOR PIVOT FOR TURRET ASSY. C Estab
17) THREADED BOSS M10X18MMX 25MM Description : THREADED BOSS M10X18MMX18MM() Specification : THREADED BOSS M10 X18MM X 18MM (LF No. 9013193479000) C Estab
18) THREADED BOSS M10 X 20MM OD X 30MM Description : THREADED BOSS M10 X 20MM OD X 30MM() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
19) THREADED BOSS M12 X 1 point 75 X OD 20 X 20L Description : THREADED BOSS M12 X 1 point 75 X OD 20 X 20L() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
20) THREADED BOSS M12X 1 point 75 X OD 20X60 MM Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
21) THREADED BOSS M12 X 20MM OD X30MM Description : THREADED BOSS M12 X 20MM OD X30MM() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
22) THREADED BOSS M6 X 12MM OD X12MM Description : THREADED BOSS M6 X 12MM OD X12MM() Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2 C Estab
23) THREADED BOSS M6 12MM 16MM Description : THREADED BOSS M6 12MM 16MM() Specification : THREADED BOSS M6X12MMX16MM C Estab
24) THREADED BOSS M8 X 16MM OD X12MM Description : THREADED BOSS M8 X 16MM OD X12MM() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
25) THREADED BOSS M8 X 16MM OD X25MM Description : THREADED BOSS M8 X 16MM OD X25MM() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
26) THREADED BOSS M8 X 16MM OD X40MM Description : THREADED BOSS M8 X 16MM OD X40MM() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PLUG FOR FIRING DEVICE 1B FOR MINE Description : PLUG FOR FIRING DEVICE 1B FOR MINE() Specification : PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE C Estab
2) SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB Description : SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB() Specification : SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB C Estab
Category : p
Grade : 3
Size : S
227 SUPREME ENGINEERING WORKS
SH NO.2-132/2,SHOBANA COLONY ROAD NO-4,BALANAGAR, HYDERABAD, TELANGANA
PIN1 : 500042
Phone No. : 040 66208031
GSTIN : 36APSPS6495L1ZN 		APSPS6495L

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT DRAIN BUSH Description : BOLT DRAIN BUSH() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
2) BOSS M12 X 20 OD X 30L Description : BOSS M12 X 20 OD X 30L() Specification : BOSS M12 X 20 (OD)X 30L C Estab
3) BOSS M12 X 25L Description : BOSS M12 X 25L() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
4) BOSS M12 X 20 OD X 65L Description : BOSS M12 X 20 OD X 65L() Specification : BOSS M12 X 20(OD)X 65L C Estab
5) BOSS M12x22x25 OST 3 1496 72 Description : BOSS M12x22x25 OST 3 1496 72() Specification : BOSS M12x22x25 OST 3-1496-72 C Estab
6) BOSS M12 X24 OD X 25 L Description : BOSS M12 X24 OD X 25 L() Specification : BOSS M12 X24 (OD) X 25 L C Estab
7) BOSS M20 BY 25 OD 30L Description : BOSS M20 BY 25 OD 30L() Specification : BOSS M20 X 25 (OD) X 30L C Estab
8) BOSS M6 OD 20 16 L Description : BOSS M6 OD 20 16 L() Specification : BOSS M6XOD(20)X16L C Estab
9) BOSS M6X12X30 OST 3 Description : BOSS M6X12X30 OST 3() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
10) BOSS M6X12X36 OST 3 1496 72 Description : BOSS M6X12X36 OST 3 1496 72() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
11) BOSS M8 20 OD 20 L Description : BOSS M8 20 OD 20 L() Specification : BOSS M8X20(OD)X 20L C Estab
12) BOSS M8X16X8 OST 3 1496 72 Description : BOSS M8X16X8 OST 3 1496 72() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
13) BOSS IS 9550 Description : BOSS IS 9550() Specification : BOSS M10X15LX180D IS:9550 C Estab
14) BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV. Description : BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV.() Specification : BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV. C Estab
15) Casting for Bracket for Turret Assy. Description : Casting for Bracket for Turret Assy.() Specification : Casting for Bracket for Turret Assy. C Estab
16) CATCH OBLIQUE HOOK STEEL IS 4365 79 Description : CATCH OBLIQUE HOOK STEEL IS 4365 79() Specification : CATCH/HOOK STEEL IS:4365-79 C Estab
17) Eye 765 58 193 A Description : Eye 765 58 193 A() Specification : Eye 765-58-193/A C Estab
18) Handle Gost Std Description : Handle Gost Std() Specification : Handle Gost Std. (Handle Blank) C Estab
19) HINGE GOST STD Description : HINGE GOST STD() Specification : HINGE GOST STD 765-58-211 C Estab
20) Hinge Driver Hatch Assembly forging Description : Hinge Driver Hatch Assembly forging() Specification : Hinge (Driver Hatch Assembly) forging C Estab
21) HOOK PART NO 675 57271 A Description : HOOK PART NO 675 57271 A() Specification : HOOK PART NO 675-57-271/A C Estab
22) LEVER CONTROL HAND/TORSION BAR Description : LEVER CONTROL HAND/TORSION BAR() Specification : LEVER CONTROL HAND C Estab
23) FORGING FOR PIVOT FOR TURRET ASSY. Description : FORGING FOR PIVOT FOR TURRET ASSY.() Specification : FORGING FOR PIVOT FOR TURRET ASSY. C Estab
24) SAFETY BELT (FOR MPV) Description : SAFETY BELT (FOR MPV)() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G C Estab
25) Shaft 42 CR 4 MO 2 oblique TO Description : Shaft 42 CR 4 MO 2 oblique TO() Specification : Shaft 42 CR 4 MO 2/TO Drg No. 765-58-222/A C Estab
26) THREADED BOSS M10X18MMX18MM Description : THREADED BOSS M10X18MMX18MM() Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8 C Estab
27) THREADED BOSS M10 X 18 X 18MM() Specification : THREADED BOSS M10 X 18 X 18MM (L.F. No.-9013193479000) C Estab
28) THREADED BOSS M10 X 20MM OD X 30MM Description : THREADED BOSS M10 X 20MM OD X 30MM() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
29) THREADED BOSS M12 X 1 point 75 X OD 20 X 20L Description : THREADED BOSS M12 X 1 point 75 X OD 20 X 20L() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
30) THREADED BOSS M12X 1 point 75 X OD 20X60 MM Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
31) THREADED BOSS M12 X 20MM OD X30MM Description : THREADED BOSS M12 X 20MM OD X30MM() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
32) THREADED BOSS M6 X 12MM OD X12MM Description : THREADED BOSS M6 X 12MM OD X12MM() Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2 C Estab
33) THREADED BOSS M6 12MM 16MM Description : THREADED BOSS M6 12MM 16MM() Specification : THREADED BOSS M6X12MMX16MM C Estab
34) THREADED BOSS M8 X 16MM OD X12MM Description : THREADED BOSS M8 X 16MM OD X12MM() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
35) THREADED BOSS M8 X 16MM OD X25MM Description : THREADED BOSS M8 X 16MM OD X25MM() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
36) THREADED BOSS M8 X 16MM OD X40MM Description : THREADED BOSS M8 X 16MM OD X40MM() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
Category : dp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BOLT TO DRG No M10 8G X 55 109 40 X 029 IN FINISHED CONDITION Description : BOLT TO DRG No M10 8G X 55 109 40 X 029 IN FINISHED CONDITION() Specification : BOLT TO DRG No. M10 - 8G X 55.109.40 X .029 IN FINISHED CONDITION C Estab
2) SCREW TO DRG No M4 6GX6 point 33 H 026 IN FINISHED CONDITION Description : SCREW TO DRG No M4 6GX6 point 33 H 026 IN FINISHED CONDITION() Specification : SCREW TO DRG. No. M4-6GX6.33 H 026 IN FINISHED CONDITION C Estab
3) BOLN TO DRG No BOLT M10 8G X 55 109 40 X 029 IN FINISHED CONDITION Description : BOLN TO DRG No BOLT M10 8G X 55 109 40 X 029 IN FINISHED CONDITION() Specification : BOLN TO DRG. No. BOLT M10 - 8G X 55.109.40 X .029 IN FINISHED CONDITION C Estab
4) RING GOST 13943 86 V55 Description : RING GOST 13943 86 V55() Specification : RING TO DRG. No. GOST 13943-86 V558 IN FINISHED CONDITION C Estab
5) THREADED BUSH TO DRG No 9 A 621 08 015 Description : THREADED BUSH TO DRG No 9 A 621 08 015() Specification : THREADED BUSH TO DRG. No. 9-A-621.08.015 C Estab
6) BUSH GOST 1050 88 Description : BUSH GOST 1050 88() Specification : BUSH (AK-630.101.24) STEEL-5, GOST : 1050-88 C Estab
7) COTTER PIN GOST 397 79 Description : COTTER PIN GOST 397 79() Specification : COTTER PIN. 2.5 X 25.029, GOST : 397 - 79 C Estab
8) SECTOR RIM ( AK 630 101.26) FORGING TO DR TO SPECN ALLOY A MG6.GOST: 4784-97 Description : SECTOR RIM ( AK 630 101.26) FORGING TO DR TO SPECN ALLOY A MG6.GOST: 4784-97() Specification : AS PER DRG. & SPECIFICATION C Estab
9) BOLT 2 M10 8g X 50 109 40 X 029 GOST 7798 70 Description : BOLT 2 M10 8g X 50 109 40 X 029 GOST 7798 70() Specification : BOLT .2 M10 - 8g X 50.109.40 X .029 GOST : 7798-70 C Estab
10) BOLT 2 M10 8g X 40 109 40 X 029 GOST 7798 70 Description : BOLT 2 M10 8g X 40 109 40 X 029 GOST 7798 70() Specification : BOLT .2 M10 - 8g X 40.109.40 X .209 GOST : 7798-70 C Estab
11) SCREW VM4 6GX30 109 40X 029 GOST 17475 80 Description : SCREW VM4 6GX30 109 40X 029 GOST 17475 80() Specification : SCREW VM4-6GX30.109.40X.029 GOST : 17475-80 C Estab
12) NUTM8 8G 10 POINT 40X029 GOST 5918 73 Description : NUTM8 8G 10 POINT 40X029 GOST 5918 73() Specification : NUTM8-8G.10.40X029 GOST : 5918 - 73 C Estab
13) WASHER 10 01 08KP 029 GOST 13463 77 Description : WASHER 10 01 08KP 029 GOST 13463 77() Specification : WASHER .10.01.08KP.029 GOST : 13463 - 77 C Estab
14) NUT M6 6G 10 POINT 40X 029 GOST 5919 73 Description : NUT M6 6G 10 POINT 40X 029 GOST 5919 73() Specification : NUT M6-6G.10.40X.029 GOST : 5919 - 73 C Estab
15) NUT M8 6G 10 POINT 40X 029 GOST 5919 73 Description : NUT M8 6G 10 POINT 40X 029 GOST 5919 73() Specification : NUT M8-6G.10.40X.029 GOST : 5919 - 73 C Estab
16) RING V8 GOST 13942 86 Description : RING V8 GOST 13942 86() Specification : RING V8, GOST : 13942 - 86 C Estab
17) PIN TO DRG No AK 630 119 32 IN FINISHED CONDITION Description : PIN TO DRG No AK 630 119 32 IN FINISHED CONDITION() Specification : PIN TO DRG. No. AK-630 119-32 IN FINISHED CONDITION C Estab
18) FACTORY SYMBOL Description : FACTORY SYMBOL() Specification : FACTORY SYMBOL TO DRG. No. AK-630 102-57 IN FINISHED CONDITION C Estab
19) WASHER 3 65G 029 GOST 6402 70 Description : WASHER 3 65G 029 GOST 6402 70() Specification : WASHER 3.65G.029 GOST 6402 - 70 C Estab
20) WASHER 4 65G 029 GOST 6402 70 Description : WASHER 4 65G 029 GOST 6402 70() Specification : WASHER 4.65G.029 GOST 6402 - 70 C Estab
21) WASHER A3 025 029 GOST 11371 78 Description : WASHER A3 025 029 GOST 11371 78() Specification : WASHER A3.025.029 GOST 11371 - 78 C Estab
22) SCREW MS 6GX8 33N 40KH 026 GOST 1478 93 GRADE EN19 Description : SCREW MS 6GX8 33N 40KH 026 GOST 1478 93 GRADE EN19() Specification : SCREW MS-6GX8.33N.40KH.026 GOST : 1478-93 GRADE EN19 C Estab
23) BOLT TO SPECIFICATION M8 8G X 75 109 40 X 029 Description : BOLT TO SPECIFICATION M8 8G X 75 109 40 X 029() Specification : BOLT TO SPECIFICATION M8-8G X 75.109.40 X .029 C Estab
24) RIB 102 68 Description : RIB 102 68() Specification : RIB TO DRG. No. AK-630 102-68 IN FINISHED CONDITION C Estab
25) RIB 102 69 Description : RIB 102 69() Specification : RIB TO DRG. No. AK-630 102-69 IN FINISHED CONDITION C Estab
Category : ddp
Grade : 3
Size : S
1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) SET OF PARTS FOR ERECTION FOR AK 630 GUN WITH ALTERNATE MATERIAL 28 MECHANICAL ITEMS AS PER ATTACHED LIST Description : SET OF PARTS FOR ERECTION FOR AK 630 GUN WITH ALTERNATE MATERIAL 28 MECHANICAL ITEMS AS PER ATTACHED LIST() Specification : AS PER DRAWING R Nonestab
Category : ddp
Grade : 3
Size : S
228 THE SOUTHERN PRESSURE CASTINGS
EKKATTUTHANGAL, 36, 38A AND 38B NP, INDUSTRIAL ESTATE, KALAIMAGAL NAGAR, CHENNAI, Chennai, Tamil Nadu, 600032 KAMARAJAR NAGAR CHENNAI Tamil Nadu
PIN1 : 600032
Phone No. : 22523025
GSTIN : 33AAAFT3339D1ZM 		AAAFT3339D

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) REGULATOR BODY[62]() Specification : REGULATOR BODY TO DRG NO. 315-619-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
2) GOVERNOR COVER[62]() Specification : GOVERNOR COVER TO DRG NO. 315-620-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
3) GOVERNOR BODY UTD 20[62]() Specification : GOVERNOR BODY to DRG.NO: SB 20-15-601-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : S
229 M/S FRIENDS CABLE INDUSTRIES
B-27 Sector-8, Noida-201301 Sector-8 Noida Uttar Pradesh
PIN1 : 201301
Phone No. : 2424129
GSTIN : 09AAAFF1232H1ZV 		DELF01588G

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) ALL TYPES OF SHIELDED/UNSHIELDED WIRE() AS PER DRG. E ESTAB.
2) SLEEVES() AS PER DRG. E ESTAB.
3) SHIELDING BRAIDS() AS PER DRG. E ESTAB.
4) ALL TYPES ELECTRIC & TELECOM CABLES INCLUDING DEFENCE SPECIFICATION CABLES.() AS PER DRG. E ESTAB.
Category : DDP,DP
Grade : I,II
Size : S
230 DEVENDRA AUTOCOM PRIVATE LIMITED
Devendra Autocom Private Limited #35, B/2, Second Main Road, Ambattur Industrial Estate, Chennai-600058 Second Main Road Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26258127
GSTIN : 33AAACD1193N1ZN 		AAACD1193N

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) OIL PUMP ASSEMBLY[62]() Specification : OIL PUMP ASSEMBLY TO DRG NO. SB 20-12-00-13 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP HOUSING[62]() Specification : FUEL PUMP HOUSING TO DRG NO. SB 3327-01-10 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP DRIVE HOUSING ASSY[62]() Specification : FUEL PUMP DRIVE HOUSING ASSY TO DRG NO. SB 3308-04-24 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
2) REGULATOR BODY[62]() Specification : REGULATOR BODY TO DRG NO. 315-619-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
3) GOVERNOR COVER[62]() Specification : GOVERNOR COVER TO DRG NO. 315-620-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
4) FUEL PUMP BODY V92S2[62]() Specification : FUEL PUMP BODY to DRG.NO: 3327-20-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
5) GOVERNOR BODY UTD 20[62]() Specification : GOVERNOR BODY to DRG.NO: SB 20-15-601-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
6) FUEL PUMP BODY UTD 20[62]() Specification : FUEL PUMP BODY to DRG. NO: SB 20-27-01-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP ASSY UTD 20[62]() Specification : FUEL PUMP ASSY TO DRG NO SB 20-27-00-4 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) DELIVERY VALVE ASSY T90[62]() Specification : DELIVERY VALVE TO DRG NO. SB 327-59-11 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) FUEL PUMP SHAFT Description : FUEL PUMP SHAFT() Specification : FUEL PUMP SHAFT TO DRG NO SB 3327-04 C Estab
Category : ddp
Grade : 3
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) GOVERNOR LEVER[62]() Specification : GOVERNOR LEVER TO DRG NO.SB 20-15-662-5 C Estab
2) REGULATOR LEVER[62]() Specification : REGULATOR LEVER TO DRG NO.SB 315-777-2 C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) WATER PUMP[62]() Specification : WATER PUMP TO DRG NO.SB 411-00-56 C Estab
2) BEARING BOX[62]() Specification : BEARING BOX (BALL BEARING AXLE BOX ASSY) TO DRG NO.SB 3327-02-8-01 C Estab
3) LOW PRESSURE FUEL PIPE[62]() Specification : LOW PRESSURE FUEL PIPE TO DRG NO. SB 3335-00-9 C Estab
Category :
Grade : Grade III
Size : S
231 SHRI BHAVANI TOOLING SYSTEMS
GROUND FLOOR, PLOT NO.83/B-1/A, SUBASHNAGAR, IDA, JEEDIMETLA, HYDERABAD BUILDING NO.7-650/1, PHASE1 Medchal-Malkajgiri Telangana
PIN1 : 500055
Phone No. : 9246265089
GSTIN : 36AIGPD4374A1ZP 		HYDR10733C

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]() Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM. C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) DOME AS PER DRDL DRG NO 542 08 02 01 01 01[00]() Specification : DOME AS PER DRDL DRG.NO.542 08 02 01 01 01 C Estab
2) PLATE MOVEMENT ALTERNATIVE WITH SET BACK MECHANISM TO CQA A DRG NO 13023 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]() Specification : PLATE MOVEMENT ALTERNATIVE WITH SET BACK MECHANISM TO CQA (A) DRG. NO. 13023-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002) C Estab
3) PLASTIC CONTAINER TO OFAJ DRG NO FS 3045 FOR FIN ASSY OF 84 MM HEAT 751[00]() Specification : PLASTIC CONTAINER TO OFAJ DRG NO. FS-3045 FOR FIN ASSY OF 84 MM HEAT 751 C Estab
4) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]() Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710 C Estab
5) COMBINED SAFETY TO OFAJ DRG NO FS 3067 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]() Specification : COMBINED SAFETY TO OFAJ DRG NO. FS-3067 FOR FUZE SYSTEM OF 84 MM SMOKE 469C C Estab
6) TOOTHED SEGMENT WITH 12 TEETH MS 106 107 TO OFAJ DRG NO FS 3066 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]() Specification : TOOTHED SEGMENT WITH 12 TEETH MS 106/107 TO OFAJ DRG NO. FS-3066 FOR FUZE SYSTEM OF 84 MM SMOKE 469C C Estab
7) PLATE NO 1 TO OFAJ DRG NO FS 3123 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]() Specification : PLATE NO. 1 TO OFAJ DRG NO. FS-3123 FOR FUZE SYSTEM OF 84 MM SMOKE 469C C Estab
8) SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218[00]() Specification : SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218 R Estab
9) GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706[00]() Specification : GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706 R Estab
Category :
Grade : Grade III
Size : S
232 EAGLE RUBBER PRODUCTS
36 STRAND ROAD 4TH FLOOR ROOM NO 35A 36 STARND ROAD KOLKATA West Bengal
PIN1 : 700001
Phone No. : 22431890 		CALK06428C

Download 		1) Ordnance Factory Itarsi
Name Specification Use Status
1) BROMOBUTYL RUBBER CAP() AS PER ANNEXURE-V & HEMRL LETTER NO. HEMRL/SRP/AL/PROD/III DATED: 08.11.11. E Estab
Category : DP
Grade : I,II
Size : S
233 RAKSHA SUPREME CAMOUFLAGE PVT.LTD.
PLOT NO.132, SECTOR 25 FARIDABAD HARYANA
PIN1 : 121004
Phone No. : 0129- 2230165
GSTIN : 06AAGCR0534B1ZY 		AAGCR0534B

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) MULTI SPECTRAL CAMUFLAGEEQUIPMENTFOR 155MM GUN() ASPER GCFDRG/SPECN./REQUIRMENTS C NOT ESTAB
2) SYNTHETIC CAMOUFLAGE NETS(VISUAL & NIR)() ASPER GCFDRG/SPECN./REQUIRMENTS C NOT ESTAB
3) MULTI SPECTRAL CAMOUFLAGE PAINTS() ASPER GCFDRG/SPECN./REQUIRMENTS C NOT ESTAB
Category : P
Grade : III
Size : S
234 RISHI CHEMICAL WORKS PVT. LTD.
"KOH-I-NOOR' BUILDING, 105, PARK STREET PARK STREET KOLKATA West Bengal
PIN1 : 700016
Phone No. : 22290068 		CALR00117F

Download 		1) Ordnance Factory Itarsi
Name Specification Use Status
1) POTASSIUM CARBONATE() SPECN. IS7129-921ST REV. REAFF 2010 E Not Estab
Category : DP
Grade : I
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) POTASSIUM CARBONATE() SPECN. IS7129-921ST REV. REAFF 2010 E Not Estab
Category : DP
Grade : I
Size : S
235 JAI AUTO PVT LTD
B-44 and B-52, Site IV, Industrial Area, Sahibabad Ghaziabad Uttar Pradesh
PIN1 : 201010
Phone No. : 4377725
GSTIN : 09AAACJ0172B1Z4 		AAACJ0172B

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) THRUST DISK FORGING TO 3901040059[39]() Specification : 172.40.326/F R Nonestab
2) BUSHING FORGING TO 3906113240[39]() Specification : 175.24.085/F C Nonestab
3) RING TO 3906203163[39]() Specification : 175.18.043/F C Nonestab
4) DISC THRUST TO 3906401067[39]() Specification : 172.40.228/F R Nonestab
5) HOUSING BOOSTER RH AND LH TO 3906401146[39]() Specification : 175.40.052/053/F C Nonestab
6) PLANET PINION TO 3906404013[39]() Specification : 172.43.006/F C Nonestab
7) BUSHING TO 3906411099[39]() Specification : 172.51.026/F C Nonestab
8) SUPPORT OF LH REDUCTION GEAR UNIT TO 3906801445[39]() Specification : 175.01.378-B/F C Nonestab
9) COVER TO 3906861044[39]() Specification : 172.52.127/F R Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) TOOTHED RIM TO 3901011026[39]() Specification : 188.11.002/F R Nonestab
2) MOVABLE RACE RING FORGING TO 3901011048[39]() Specification : 447A.11.016/F C Nonestab
3) RH DRUM TO 3901040034[39]() Specification : 172.40.300/F R Nonestab
4) DRUM RH FORGING TO 3901040036[39]() Specification : 172.40.302/F R Nonestab
5) BOOSTER FORGING TO 3901040054[39]() Specification : 172.40.321/F R Nonestab
6) INNER BOOSTER FORGING TO 3901040055[39]() Specification : 172.40.322/F R Nonestab
7) RH EXTREME ENGAGING RING FORGING TO 3901040061[39]() Specification : 172.40.328/F R Nonestab
8) RH MIDDLE ENGAGING RING FORGING TO 3901040062[39]() Specification : 3901040062 R Nonestab
9) R H FRONT FLANGE TO 3901040104[39]() Specification : 172.40.364/F C Nonestab
10) L H FRONT FLANGE TO 3901040106[39]() Specification : 172.40.365/F R Nonestab
11) RING RACE LOWER TO 3901212010[39]() Specification : 172.12.015/F R Nonestab
12) RING RACE UPPER TO 3901212011[39]() Specification : 188.12.002/F R Nonestab
13) MOVABLE RACE RING TO 3906109014[39]() Specification : 172.11.067/F R Nonestab
14) RING TO 3906109020[39]() Specification : 172.11.073/F R Nonestab
15) GEAR RIM TO 3906109067[39]() Specification : 172.11.129/F R Nonestab
16) BLANK SIZE FOR RING RACE LOWER TO 3906111026[39]() Specification : 434.12.007/F R Nonestab
17) BLANK SIZE FOR RING RACE UPPER TO 3906111455[39]() Specification : 172.12.031/F R Nonestab
18) FLANGE FRONT L H TO 3906401045[39]() Specification : 172.40.201-1A/F C Nonestab
19) RING TO 3906401050[39]() Specification : 172.40.146/F R Nonestab
20) BOOSTER TO 3906401070[39]() Specification : 172.40.231/F R Nonestab
21) BOOSTER TO 3906401071[39]() Specification : 172.40.232/F R Nonestab
22) GEAR ANNULUS TO 3906401085[39]() Specification : 172.40.247/F R Nonestab
23) FLANGE FRONT R H TO 3906401101[39]() Specification : 175.40.001-A/F C Nonestab
24) FLANGE REAR RH TO 3906401115[39]() Specification : 175.40.019-1A/F C Nonestab
25) DRUM RH AND LH TO 3906401123[39]() Specification : 175.40.017-A&018-A/F C Nonestab
26) DISC TO 3906401132[39]() Specification : 175.40.031/F R Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) RH EYE FORGING TO 3901010090[39]() Specification : 172.10.330-1/F C Nonestab
2) LH EYE FORGING TO 3901010092[39]() Specification : 172.10.343/F R Nonestab
3) FLANGE FORGING TO 3901023040[39]() Specification : 172.23.105/F R Nonestab
4) RELEASE RING FORGING TO 3901040031[39]() Specification : 172.40.225-1/ R Nonestab
5) PLANET PINION Z 15 TO 3901040045[39]() Specification : 172.40.312/F C Nonestab
6) PLANET PINION Z 18 TO 3901040046[39]() Specification : 172.40.313/F R Nonestab
7) GEAR TO 3906202022[39]() Specification : 434.17.005/F R Nonestab
8) BRACKET TO 3906214199[39]() Specification : 172.65.111/F R Nonestab
9) PINION PLANET TO 3906401033[39]() Specification : 172.40.025/F R Nonestab
10) BUSHING TO 3906401037[39]() Specification : 172.40.044/F R Nonestab
11) WHEEL GEAR L H TO 3906401105[39]() Specification : 175.40.005/F C Nonestab
12) PLANET PINION TO 3906401164[39]() Specification : 175.40.138/F C Nonestab
13) DISC THRUST TO 3906401197[39]() Specification : 432.40.128/F R Nonestab
14) FLANGE DRIVING TO 3906402053[39]() Specification : 175.41.075/F C Nonestab
15) COUPLING TO 3906402060[39]() Specification : 175.41.084/F R Nonestab
16) COUPLING TO 3906402066[39]() Specification : 175.41.091/F C Nonestab
17) CAP FILLER TO 3906402076[39]() Specification : 172.41.011/F R Nonestab
18) GEAR BEVEL DRIVEN TO 3906402078[39]() Specification : 172.41.082/F R Nonestab
19) COUPLING TOOTHED TO 3906406229[39]() Specification : 175.45.112/F R Nonestab
20) RING LABYRINTH TO 3906411024[39]() Specification : 172.51.017/F C Nonestab
21) RING TO 3906411026[39]() Specification : 172.51.020/F R Nonestab
22) FLANGE DRAIN HOLE TO 3906802077[39]() Specification : 175.03.030/F R Nonestab
23) ADAPTOR TO 3909849066[39]() Specification : PV572.0711.2166/F R Nonestab
24) GEAR SPL 1 TO 3909849380[39]() Specification : PV572.0711.3080/F R Nonestab
25) GEAR SPL 1 TO 3909849402[39]() Specification : PV572.0711.3102/F R Nonestab
26) GEAR SPL 2 TO 3909849406[39]() Specification : PV572.0711.3106/F R Nonestab
27) COVER TO 3996406044[39]() Specification : 172.45.036-1/F R Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET TO 3901010022[39]() Specification : 188.10.007-2/F R Nonestab
2) STRAP FORGING TO 3901011038[39]() Specification : 188.11.013/F R Nonestab
3) COVER PLATE FORGING TO 3901011042[39]() Specification : 188.11.026/F R Nonestab
4) LOCK FORGING TO 3901011069[39]() Specification : 447A.11.069-2/F C Nonestab
5) HANDLE FORGING TO 3901011072[39]() Specification : 447A.11.086/F R Nonestab
6) HANDLE LOCK FORGING TO 3901011073[39]() Specification : 447A.11.088/F R Nonestab
7) ROD FORGING TO 3901021012[39]() Specification : 187.21.032/F R Nonestab
8) SUPPORT FORGING TO 3901021076[39]() Specification : 188.21.042/F R Nonestab
9) COLLAR FORGING TO 3901021110[39]() Specification : 447.21.036-1/F R Nonestab
10) THRUST PLATE FORGING TO 3901023024[39]() Specification : 172.23.078-1/F R Nonestab
11) BUSHING FORGING TO 3901023030[39]() Specification : 172.23.093/F C Nonestab
12) GEAR FORGING TO 3901023059[39]() Specification : 176.23.112/F R Nonestab
13) GEAR FORGING TO 3901023081[39]() Specification : 176.23.111/F R Nonestab
14) GEAR TO 3901025014[39]() Specification : 172.25.107/F C Nonestab
15) GEAR FORGING TO 3901028039[39]() Specification : 172.28.015-2/F R Nonestab
16) STOPPER TO 3901051006[39]() Specification : 172.51.025B/F R Nonestab
17) LEVER FORGING TO 3901061018[39]() Specification : 188.61.005/F R Nonestab
18) CLAMP FORGING TO 3901081045[39]() Specification : 187.81.006/F R Nonestab
19) FLANGE FORGING TO 3901218050[39]() Specification : 185.18.056/F R Nonestab
20) ROD TO 3906109061[39]() Specification : 172.11.115/F R Nonestab
21) HANDLE TO 3906109102[39]() Specification : 432.11.076-2/F R Nonestab
22) HANDLE TO 3906109113[39]() Specification : 432.11.171/F C Nonestab
23) HANDLE LOCK TO 3906110023[39]() Specification : 432.11.053-1/F R Nonestab
24) BUSHING TO 3906113046[39]() Specification : 172.23.019/F R Nonestab
25) FLANGE TO 3906113056[39]() Specification : 434.23.046-1/F R Nonestab
26) INNER DRUM TO 3906202040[39]() Specification : 432.17.010/F R Nonestab
27) BODY UPPER TO 3906202050[39]() Specification : 432.17.033-2/F R Nonestab
28) GUIDE TO 3906206041[39]() Specification : 172.21.064/F C Nonestab
29) BUSHING TO 3906206047[39]() Specification : 172.21.070/F R Nonestab
30) BAR TO 3906206063[39]() Specification : 434.21.030/F C Nonestab
31) CLUSTER GEAR TO 3906208026[39]() Specification : 172.25.009-1/F C Nonestab
32) SHAFT PINION TO 3906208037[39]() Specification : 172.25.065/F R Nonestab
33) BUSHING DRIVING TO 3906208038[39]() Specification : 172.25.066/F R Nonestab
34) GEAR TO 3906208046[39]() Specification : 172.28.009-1/F R Nonestab
35) CLUSTER GEAR TO 3906209070[39]() Specification : 172.26.127/F R Nonestab
36) TIE ROD TO 3906210067[39]() Specification : 172.27.066/F R Nonestab
37) WORM WHEEL FORGING TO 3906210119[39]() Specification : 172.27.131/F C Nonestab
38) CAM WHEEL TO 3906210124[39]() Specification : 172.27.135/F C Nonestab
39) GEAR TO 3906211061[39]() Specification : 172.28.007-1/F R Nonestab
40) CAM TO 3906211110[39]() Specification : 172.28.069-4A/F R Nonestab
41) STRIP TO 3906214076[39]() Specification : 176.65.021/F R Nonestab
42) FLANGE TO 3906305643[39]() Specification : 54.03.003-2/F R Nonestab
43) FLANGE TO 3906305911[39]() Specification : 54.05.272-1/F R Nonestab
44) SHAFT GEAR RH AND LH TO 3906401031[39]() Specification : 172.40.019-1/F R Nonestab
45) GEAR AXLE R H TO 3906401075[39]() Specification : 172.40.241/F R Nonestab
46) GEAR AXLE L H TO 3906401076[39]() Specification : 172.40.242/F R Nonestab
47) GEAR LH TO 3906401203[39]() Specification : 432.40.184-4/F C Nonestab
48) BUSH TO 3906401206[39]() Specification : 432.40.213/F R Nonestab
49) OUTER CUP TO 3906403069[39]() Specification : 172.42.032/F C Nonestab
50) THRUST FLANGE TO 3906407034[39]() Specification : 172.46.052-1/F R Nonestab
51) GEAR OF DELIVERY PUMP TO 3906407035[39]() Specification : 172.46.053/F R Nonestab
52) GEAR DRIVE TO 3906407047[39]() Specification : 172.46.078/F R Nonestab
53) NUT TO 3906411072[39]() Specification : 54.12.028/F C Nonestab
54) BUSHING INNER TO 3906412022[39]() Specification : 172.2M.52.004/F R Nonestab
55) COVER TO 3906412042[39]() Specification : 172.52.105/F R Nonestab
56) ROD TO 3906417046[39]() Specification : 172.61.044/F R Nonestab
57) LEVER TO 3906419179[39]() Specification : 175.63.078/F R Nonestab
58) GUIDE TO 3906419201[39]() Specification : 432.63.131-1/F R Nonestab
59) GUIDE TO 3906420037[39]() Specification : 176.64.008-1/F R Nonestab
60) GUIDE TO 3906420118[39]() Specification : 175.64.058/F R Nonestab
61) UPPER BRACKET TO 3906609141[39]() Specification : 155.32.037/ R Nonestab
62) PINION SHAFT TO 3906851109[39]() Specification : 172.25.089-1/F R Nonestab
63) BUSHING TO 3906861049[39]() Specification : 172.52.135/F C Nonestab
64) THRUST RING TO 3906861050[39]() Specification : 172.52.136/F C Nonestab
65) GEAR TO 3906890059[39]() Specification : 172.28.005/F R Nonestab
66) SHAFT TO 3909849374[39]() Specification : PV572.0711.3074/F R Nonestab
67) HOUSING OIL SEAL TO 3909849388[39]() Specification : PV572.0711.3088/F R Nonestab
68) END COVER TO 3909849396[39]() Specification : PV572.0711.3096/F R Nonestab
69) PLUG TO 3996412035[39]() Specification : 172.52.090-A/F C Nonestab
70) HANDLE TO 3996211160[39]() Specification : 172.28.168-A/F R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
3) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
4) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
5) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
6) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
7) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Nonestab
8) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
9) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
10) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
11) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
12) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
13) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
14) FILLING PLUG MCD 450 KG L F NO 6230400504[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
15) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
16) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
17) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
18) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED). C Nonestab
19) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
20) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
21) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
22) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED]. C Nonestab
23) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
24) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
Category :
Grade : Grade III
Size : M
236 rialto engineering pvt ltd
144/7, 7th floor, Rayala techno park, Old mahabalipuram road, Chennai-41 Old mahabalipuram road Chennai Tamil Nadu
PIN1 : 600041
Phone No. : 9384841774
GSTIN : 33AABCR3365H2ZI 		CHERO6489A

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SELECTOR STOP AS PER DRG No K 1103 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 1103 WITH FIRMS MATERIAL C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) HINGE PIN AS PER Drg No K 4003 WITH FIRMS MATERIAL[70]() Specification : AS PER Drg No K 4003 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GUARD TRIGGER AS PER DRG No K 1104 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 1104 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
2) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]() Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL E Nonestab
4) FERRULE BUTT TO D S CAT NO 1005 001613 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1207[70]() Specification : AS PER D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207) C Nonestab
Category :
Grade : Grade III
Size : S
237 EASWARAN TOOLS
5,BHRAMIN STREET KORATTUR CHENNAI Tamil Nadu
PIN1 : 600080
Phone No. : 9444756832
GSTIN : 33AKRPS6417Q1Z8 		33AKRPS64Q

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
Category :
Grade : Grade III
Size : S
238 M/sCADME
No30,1st cross, 1st main, L.G.Rammana Layout Laggere Bengaluru Karnataka
PIN1 : 560058
Phone No. : 0802839139
GSTIN : 29APAPR8403B3Z0 		APAPR84031

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) LOUVER LH TO 6209801477[62]() Specification : PV572.0718.2363 C Nonestab
2) LOUVER RH TO 6209801480[62]() Specification : PV572.0718.2362 C Nonestab
Category :
Grade : Grade III
Size : S
239 VENVE LIGHT METALS LTD.
FLAT NO.404, BHARATHI BLOCK, VENKATESHWARA HEIGHTS, OPP. HMT NAGAR, NACHARAM, HYDERABAD, ANDHRA PRADESH
PIN1 : 500076
Phone No. : 040-24031930, 09848051893
GSTIN : 36AABCV0195R1ZQ 		HYDV01159E

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET() DRG.NO.175.63.054-1/C R NOT ESTABLISHED
2) SPACING SLEEVE() DRG.NO.54.12.022-2A/C C Non Established
3) SPACING SLEEVE() DRG.NO.175.50.009/C C Non Established
Category : S
Grade : III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SPROCKET WHEEL TO 3806414007[38]() Specification : 175.54.004-3/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SLEEVE TO DRG NO BOF 6151786[90]() Specification : SLEEVE TO DRG NO BOF 6151786 C Nonestab
2) 9073200005 CASTING FOR BRACKET TO DRG NO 2A46M 109 82[90]() Specification : CASTING FOR BRACKET TO DRG.NO.2A46M.109-82 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) OUTER DISC TO 3806416089[38]() Specification : 3806416089 R Nonestab
2) INNER DISC TO 3806416090[38]() Specification : 3806416090 R Nonestab
3) FINAL DRIVE COVER LEFT HAND TO 3806404017[38]() Specification : 3806404017 C Nonestab
4) COVER OF FINAL DRIVE RH TO 3806404018[38]() Specification : 175.43.002/C C Nonestab
5) BRACKET CASTING TO 3801201151[38]() Specification : 172.01.735/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COVER TO 3806110007[38]() Specification : 172.11.117/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SEALING RING[38]() Specification : 172.40.056/C C Nonestab
2) CASTING HOUSING LOWER TO 3806208022[38]() Specification : 172.25.001-1/C C Nonestab
3) EXTERNAL DISK TO 3806416089[38]() Specification : 172.56.008-B/C C Nonestab
4) GUARD SYSTEM TO 3801020018[38]() Specification : 172.20.047-1/C C Nonestab
5) BASE RH HATCH TO 3801210211[38]() Specification : 188.10.220/C C Nonestab
6) 6TH ROAD WHEEL ARM BRACKET RH TO 3806801667[38]() Specification : 172.01.729/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MANTLET TO 3806205027[38]() Specification : 3806205027 R Nonestab
2) PORT HOLE TO 3801210263[38]() Specification : 3801210263 R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BODY TO 3801210185[38]() Specification : 188.10.181/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) CASTING CASE TO LF 3806211057[38]() Specification : GOST 2685-75 C Nonestab
2) PROTECTIVE BODY TO LF 3801021158[38]() Specification : GOST 26645-85 C Nonestab
3) COVER OF FINAL DRIVE LH TO LF 3806404017[38]() Specification : 175.43.001/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) RIGHT HAND STRAP TO 6201201096[62]() Specification : 184.01.059 C Nonestab
2) RING TO LF 3801041011[38]() Specification : GOST 26645-85 C Nonestab
3) REDUCTION GEAR CASE TO LF 3806402015[38]() Specification : GOST 2685-75 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BODY DELIVERY PUMP CASTING TO LF 3806407032[38]() Specification : GOST 1412-85 C Nonestab
2) BASE OF BRACKET TO LF 3801021068[38]() Specification : GOST 977-88 C Nonestab
3) CASING CASTING TO LF 3806211058[38]() Specification : GOST 2171 - 90 C Nonestab
4) HOUSING TO LF 3806210114[38]() Specification : GOST 2685-75 C Nonestab
5) SEALING RING TO LF 3806401137[38]() Specification : 54TY-P14-2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade III
Size : S
240 UNITED ENGINEERING ENTERPRISES
151/6/1, NARASINGHA DUTTA ROAD, HOWRAH, WEST BENGAL
PIN1 : 711101
Phone No. : 033-26435193, 9830106913, 9830979777.
GSTIN : 19AGOPD6790Q1ZD 		CALS24549A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) PIPE WITH FILTER() DRG.NO.172.36.048CB-1A C NOT ESTABLISHED
Category : S
Grade : III
Size : S