28) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Nonestab
29) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Nonestab
30) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Nonestab
31) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)[90]()
Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L
C
Nonestab
32) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Nonestab
33) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]()
Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.
E
Nonestab
34) GUARD FOG LAMP[90]()
Specification : GUARD FOG LAMP PART NO. X1100814-VI
C
Nonestab
35) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Estab
36) PIVOT FOR RACE RING ASSY FOR MPV FINISH[90]()
Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B.
C
Nonestab
37) SPECIAL HINGE[90]()
Specification : SPECIAL HINGE 700-10-1267/B
C
Nonestab
38) TORSION BAR[90]()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
39) HINGE ASSY LOAD BODY LADDER[90]()
Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004
Specification : PIN FOR MPV / STEEL ROD 45 DIA EN 9/BS 97/C
C
Estab
72) HEX HEADED BOLT M6 1 1 12 MM[90]()
Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL
C
Nonestab
73) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Nonestab
74) HINGE FORGING[90]()
Specification : HINGE(FORGING) DRG NO 765-50-2447-A
C
Nonestab
75) PARTITION PLATE DRIVER SIDE[90]()
Specification : PARTITION PLATE (DRIVER SIDE) DRG NO 115-31-0012-1
C
Estab
76) PUNCHED WASHER TYPE B[90]()
Specification : PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
C
Nonestab
77) Catch oblique Hook Steel IS 4365 4379[90]()
Specification : Catch/Hook Steel IS 4365-4379
C
Nonestab
78) Eye 765 58 193 A[90]()
Specification : Eye 765-58-193/A
C
Estab
79) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
80) M S BLOCK 65X173X185[90]()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
28) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Estab
29) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Estab
30) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Estab
31) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)[90]()
Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L
C
Estab
32) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Estab
33) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]()
Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.
E
Estab
34) GUARD FOG LAMP[90]()
Specification : GUARD FOG LAMP PART NO. X1100814-VI
C
Estab
35) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Estab
36) PIVOT FOR RACE RING ASSY FOR MPV FINISH[90]()
Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B.
C
Estab
37) SPECIAL HINGE[90]()
Specification : SPECIAL HINGE 700-10-1267/B
C
Estab
38) TORSION BAR[90]()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
39) HINGE ASSY LOAD BODY LADDER[90]()
Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004
Specification : PIN FOR MPV / STEEL ROD 45 DIA EN 9/BS 97/C
C
Estab
72) HEX HEADED BOLT M6 1 1 12 MM[90]()
Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL
C
Estab
73) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Estab
74) HINGE FORGING[90]()
Specification : HINGE(FORGING) DRG NO 765-50-2447-A
C
Estab
75) PARTITION PLATE DRIVER SIDE[90]()
Specification : PARTITION PLATE (DRIVER SIDE) DRG NO 115-31-0012-1
C
Estab
76) PUNCHED WASHER TYPE B[90]()
Specification : PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
C
Estab
77) Catch oblique Hook Steel IS 4365 4379[90]()
Specification : Catch/Hook Steel IS 4365-4379
C
Estab
78) Eye 765 58 193 A[90]()
Specification : Eye 765-58-193/A
C
Estab
79) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
80) M S BLOCK 65X173X185[90]()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
28) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Nonestab
29) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Nonestab
30) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Nonestab
31) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)[90]()
Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L
C
Nonestab
32) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Nonestab
33) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile[90]()
Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.
E
Nonestab
34) GUARD FOG LAMP[90]()
Specification : GUARD FOG LAMP PART NO. X1100814-VI
C
Nonestab
35) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Estab
36) PIVOT FOR RACE RING ASSY FOR MPV FINISH[90]()
Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B.
C
Estab
37) SPECIAL HINGE[90]()
Specification : SPECIAL HINGE 700-10-1267/B
C
Nonestab
38) TORSION BAR[90]()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
39) HINGE ASSY LOAD BODY LADDER[90]()
Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004
Specification : PIN FOR MPV / STEEL ROD 45 DIA EN 9/BS 97/C
C
Estab
72) HEX HEADED BOLT M6 1 1 12 MM[90]()
Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL
C
Nonestab
73) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Nonestab
74) HINGE FORGING[90]()
Specification : HINGE(FORGING) DRG NO 765-50-2447-A
C
Nonestab
75) PARTITION PLATE DRIVER SIDE[90]()
Specification : PARTITION PLATE (DRIVER SIDE) DRG NO 115-31-0012-1
C
Estab
76) PUNCHED WASHER TYPE B[90]()
Specification : PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
C
Estab
77) Catch oblique Hook Steel IS 4365 4379[90]()
Specification : Catch/Hook Steel IS 4365-4379
C
Nonestab
78) Eye 765 58 193 A[90]()
Specification : Eye 765-58-193/A
C
Estab
79) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]()
Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT)
R
Estab
80) M S BLOCK 65X173X185[90]()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
9) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Nonestab
10) Drinking Water Tank Part No X4110910E for Stallion[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
56) S A OF FUEL TANK LH 160 LITRE[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
57) Spherical Seat PART NO X4904215[90]()
Specification : BUSH BOLT SPHERICAL SEAT DRG./PART NO.X-4904215-HASE
C
Nonestab
58) Black Out Head Lamp X2310500[90]()
Specification : BLACK OUT HEAD LAMP BLACK OUT HEAD LAMP PT.NO.X2310500-A
C
Estab
59) Black Out Stop Lamp X2310300[90]()
Specification : BLACK OUT STOP LAMP BLACK OUT STOP LAMP PT. NO.X2310300-A AXLE FLOOD LAMP. X2310200-A
C
Nonestab
60) Adaptor F7885500[90]()
Specification : ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H.
C
Nonestab
61) Adaptor F0122615[90]()
Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Estab
2) LPTA Assy Mounting Spare Wheel Carrier[90]()
Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)
C
Nonestab
3) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
4) LPTA Hex Nut M16 X 2[90]()
Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8
C
Nonestab
5) LPTA Key Ring with Plate[90]()
Specification : KEY RING WITH PLATE FOR LPTA
C
Nonestab
6) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Estab
7) LPTA PLAIN NUT M12X15[90]()
Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8
C
Nonestab
8) LPTA PLAIN NUT M12 X 1 75[90]()
Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8
Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Nonestab
12) LPTA Stud for water Tank[90]()
Specification : STUD FOR WATER TANK FITMONT (4/SET) 2614 7061 8801 NOTE: - TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
13) LPTA Stud Front[90]()
Specification : STUD FRONT 2154 7061 8801N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
14) LPTA Stud Rear[90]()
Specification : STUD REAR (M12X260 LENGTH) PART NO. 215470618802N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Estab
15) LPTA Vehicle Identification plate[90]()
Specification : VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE
C
Nonestab
16) LPTA VFJ Name Plate and Logo in Hindi[90]()
Specification : VFJ Name Plate & Logo in Hindi
C
Nonestab
17) LPTA ASSY TAIL LAMP BRACKET[90]()
Specification : ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 26145440820
C
Estab
18) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Estab
19) LPTA ASSY TOWING HOOK FT[90]()
Specification : ASSY.TOWING HOOK FT. PT.NO.0125200096J-N-B5200401
C
Nonestab
20) LPTA ASSY SPACER BLOCK[90]()
Specification : ASSY.SPACER BLOCK PT NO 9051200000-V3
C
Nonestab
21) LPTA GUIDE PLATE FRONT[90]()
Specification : GUIDE PLATE CAST FRONT IPL-BS -III-LPTA-715 IPL SL.NO.03 OF SPRNG & SUSPENSION ITEM 042-322-0024Jb(FRONT SPRING U BOLT)
C
Nonestab
22) LPTA Steel Rod 18 MM[90]()
Specification : Steel Rod 18 MM Dia SPECN 15CR 3 SS 4028
R
Nonestab
23) LPTA Steel Rod 24 MM[90]()
Specification : Steel Rod 24 MM Dia SPECN 45C8 SS 4028
C
Nonestab
24) LPTA Oil Seal Rear[90]()
Specification : AGB Rear Oil Seal 2574 2820 7803 NR (IPL-AGB/61)
C
Nonestab
25) LPTA Seal Holder Inner[90]()
Specification : Seal Holder Inner
C
Nonestab
26) LPTA Seal Holder Outer[90]()
Specification : Seal Holder Outer
C
Nonestab
27) LPTA Hex Bolt M 14x1x30[90]()
Specification : Hex Bolt M 14x1x30
C
Nonestab
28) LPTA Coller Nuts Hex Bolt M35x1 5[90]()
Specification : Coller Nut / Hex Nut M35x1.5
C
Nonestab
29) LPTA Dust Cover Press Fit[90]()
Specification : Dust Cover (Press Fit) Part No 2732 3530 8201 b
C
Estab
30) LPTA Dust Cover Pinion[90]()
Specification : Dust Cover Pinion
C
Estab
31) LPTA Cross Tube[90]()
Specification : Assy Cross Tube(Torsion Bar)RHD
C
Nonestab
32) LPTA Air Tank[90]()
Specification : Kit Assy Air Tank consisting of 08 items (Voss).BS-III.
1) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]()
Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T
C
Nonestab
2) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]()
Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N
1) Adaptor Boat Tail as per Drg No 2440A10002[65]()
Specification : Adaptor.Boat Tail as per Drg. No. 2440A10002
C
Nonestab
Category : P
Grade : III
Size :
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) FORGING FOR COVER()
DRG NO-172-45-105-2/F
E
NOT ESTAE
2) FINISHED HOUSING INCLUDING PRESSURE TESTING()
DRG,175.47.01
E
NOT ESTAE
3) SELF-CENTRING RING NUT FOR()
NO-3690010
E
NOT ESTAE
4) FORGING FOR CPUPLING()
DRG NO.FG-765-15-17-3
E
NOT ESTAE
5) BEARING RING(FORGTING)()
DRG NO.172-45
E
NOT ESTAE
6) INTERMEDIATE GEAR(FORGING DRG)()
DRG NO.175-45-005/F
E
NOT ESTAE
7) FORG FOR BODY()
175-47-027F
E
NOT ESTAE
8) GEAR(FORGING DRG)()
DRG NO.175-45-000/F
E
NOT ESTAE
9) GEAR(FORGING DRG)()
DRG NO.175-45-008/F
E
NOT ESTAE
10) COVER(FORGING)()
DRG NO.175-45-051/F & DRG NO 172-45-0
E
ESTAE
11) CARRIER(FORGING)()
DRG NO.172-47-102-3/F
E
ESTAE
Category : P
Grade : I
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 105 MM MEDIUM RANGE CHAFF ROCKET (MRCR) (EMPTY) TO DRG. NO. NASK 762 SHEET 1 OF 2 SHTS DRG. NO. NASK 762 SHEET 1 OF 2 SHTS()
DRG. NO. NASK 762 SHEET 1 OF 2 SHTS
C
Not Estab.
Category : P
Grade : III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) ADAPTOR FORGINGS FOR 155 MM ERFB[02]()
Specification : AS PER HAPP DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG MACHINED LF NO 6250700174[62]()
Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
2) LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173[62]()
Specification : LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING JOB WORK OF LUG 243 ITEM CODE 9449580030[94]()
Specification : AS PER ANNEXURE -A
C
Nonestab
2) MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029[94]()
Specification : AS PER ANNEXURE-A
C
Nonestab
3) MACHINING JOB WORK OF FILLING PLUG ITEM CODE 9449580031[94]()
Specification : AS PER ANNEXURE A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521[70]()
Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
[Deemed Registration]
Name
Specification
Use
Status
1) STEEL FORGING FOR CASE OUTER DRG NO 3015202 MSF SK NO F 1171
Description : STEEL FORGING FOR CASE OUTER DRG NO 3015202 MSF SK NO F 1171()
Specification : AS PER DRAWING
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RH DRUM TO 3901040034[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SPOCKET to 3906211068[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) COUPLING TOOTHED to 3906406229[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) GEAR DELIVERY PUMP TO 3906401049[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FLANGE TO LF 3906305911[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PLANET PINION Z 15 to 3901040045[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PLANET PINION Z 18 to 3901040046[39]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FLANGE[04]()
Specification : STEEL 30XCA GOST 4543-71
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO[72]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Katni
[ENR Registration]
Name
Specification
Use
Status
1) CAST IRON MOULD 254 X 840 MM LONG
Description : CAST IRON MOULD 254 X 840 MM LONG()
Specification : CAST IRON MOULD TO SIZE 254 MM DIA X 840 MM LONG AS PER DRG.NO.12M-543 DT. 21/11/06 WITH AMMENDMENT NO.3116 DATED 11/10/2008 IN MACHINE FINISHED CONDITION. MALE & FEMALE PARTS ARE TO BE TIED TOGETHER & PUNCHED WITH SAME SL. NO. FOR PROPE
Specification : Steel Forging Cylinder Gas SKM 306*5 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF ROUGH MACHINED CARRIER FORGING AS PER DRG NO 765 15 156 10 AS PER SCOPE OF WORK NO SCOPE OF WORK MA 12 1208 22 DATED 08 06 2017[80]()
Specification : MANUFACTURING AND SUPPLY OF ROUGH MACHINED CARRIER FORGING AS PER DRG NO 765 15 156 10 AS PER SCOPE OF WORK NO SCOPE OF WORK MA 12 1208 22 DATED 08 06 2017
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) NUT TO DRG NO 613 44 071 L F NO 6230901106[62]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
2) WASHER TO DRG NO 219 35 186 L F NO 6120100106[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Estab
2) FILLING PLUG ( 450 KG)(6230400504)[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10.
[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Estab
3) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
C
Estab
4) FILLING PLUG ( 250 KG) (6240000504)[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Estab
5) O RING I D 38 0 MM 250KG 6241101204[62]()
Specification : "O" RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN
IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB.
C
Estab
6) HEX SOCKET SET SCREW 450 KG 6230001304[62]()
Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP).
C
Estab
7) Washer for 1000lbs (6220901111)[62]()
Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO
IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY
C
Estab
8) Nose Plug 1000LBS(6220901044)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE
TREATED]. [DRG. ENCLOSED.
10) Protecting Ring Assly 1000LBS (6220900610)[62]()
Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG.
NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES],
CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER
8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP
C
Estab
11) Nose Plug 250KG (6240900504)[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED).
DRG. ENCLOSED
C
Estab
12) HEX SOCKET SET SCREW BT 450 KG 1727041225[17]()
Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP)
C
Estab
13) ROLLING RING ASSEMBLY 450KG (6231100104)[62]()
Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-
ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED,
C
Estab
14) SOCKET SET SCREW FOR BASE TRANSIT 1751020207[17]()
Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED].
C
Estab
15) NOSE PLUG 450KG (6230900504)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7
[DRG. ENCLOSED]. [W/O SURFACE TREATED.
Specification : PLUG [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Estab
19) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Estab
20) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Estab
21) CONTAINER EXPLODER 450 KG (6230701104)[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.
NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Estab
22) LUG HOUSING 250 KG (6240100114)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Estab
23) LUG HOUSING HOLDER 250 KG (6240100124)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Estab
24) BASE TRANSIT FOR 1000LBS (6220901004)[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20
C
Estab
25) BASE TRANSIT (250KG) (6240900104)[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Estab
26) NEOPRENE RUBBER WASHER 450 KG (6231401501)[62]()
Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG.
NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY
C
Estab
27) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Estab
28) PLUG DUMMY 250 KG (6241101114)[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5
SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Estab
29) CONTAINER EXPLODER 250 KG (6244121304)[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.
ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB]
C
Estab
30) DETONATOR HOLDER 450 KG (6230901206)[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED)
TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Estab
31) WASHER FOR NOSE PLUG 1000LBS (6220901052)[62]()
Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO
IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002,
OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM.
C
Estab
32) PLUG FASTENING 250 KG (6241101124)[62]()
Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01
DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Estab
33) WASHER (RUBBER) 250KG (6240901300)[65]()
Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO-
PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED.
FOR 250 KG HSLD BOMB.
C
Estab
34) DETONATOR HOLDER 1000 LBS (6220900700)[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE
TREATMENT) [DRG. ENCLOSED]
C
Estab
35) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]()
7) LIGHT MACHINING OF COMPONENTS, FORGINGS AND CASTINGS()
- do -
C
Estab
Category : DDP,DP
Grade : II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIPE CHANGEOVER VALVE TO DRG NO IAN 248 SA[90]()
Specification : PIPE CHANGEOVER VALVE TO DRG NO IAN 248 SA
C
Nonestab
2) PIPE OIL TANK CYLINDER AXLE RAISING FRONT IAN 89 SA TO DRG N15 21 6103020[90]()
Specification : PIPE OIL TANK CYLINDER AXLE RAISING FRONT IAN 89 SA TO DRG N15 21 6103020
C
Nonestab
3) 9069112780 AXLE RAISING GEAR REAR ASSY TO DRG NO IAN 6 MA[90]()
Specification : 9069112780 AXLE RAISING GEAR REAR ASSY TO DRG NO IAN 6 MA
C
Nonestab
4) 9069112779 AXLE RAISING GEAR FRONT ASY TO DRG NO 3023988 IAN 5MA[90]()
Specification : 9069112780 AXLE RAISING GEAR REAR ASSY TO DRG NO IAN 6 MA
C
Nonestab
5) PIPE EXHAUST TRAVERSING VSG CROSS COUPLING IAN 194SA TO DRG NO N15 13 6099821[90]()
Specification : PIPE EXHAUST TRAVERSING VSG CROSS COUPLING IAN 194SA TO DRG NO N15 13 6099821
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Engine Factory Avadi
Name
Specification
Use
Status
1) Fuel Pipe Line()
SB 20-23-00-10
C
Not Estab
2) Gasket()
303-08-3
C
Not Estab
3) Exhaust Manifold Gasket()
CQA(HV)507-500E
C
Not Estab
4) High Pressure Pipe Line()
SB 323-00-16
C
Not Estab
5) Air Starting Pipe LIne()
SB 20-22-00-7
C
Not Estab
6) Air Starting Pipe Line()
SB 322-00-9
C
Not Estab
7) End Cap()
305-08-2A
C
Not Estab
8) Water Pump Assy.()
SB 20-11-00-6
C
Not Estab
9) Air Heating Unit()
SB 345-00-4
C
Not Estab
10) COC()
SB 447-00-1
C
Not Estab
11) Oil Filter()
SB 413-00-15
C
Not Estab
Category : DDP,DP
Grade : II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING[91]()
Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING
C
Nonestab
2) MACHINING AND PROCESSING OF AL ALLOY ROD 36MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATERIAL CLASS B OF IS 3965 1981 TO NOSE OF 84MM TPT TO DRG NO F1301 047062E WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF AL ALLOY ROD 36MM SPECN IS 733:1983 GR 24345 IN WP CONDITION MATERIAL CLASS B OF IS-3965-1981 TO NOSE OF 84MM TPT TO DRG. NO. F1301-047062E (WITHOUT SURFACE TREATMENT)
C
Nonestab
3) MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG NO CC533 C TO DISTANCE TUBE OF 84 MM TPT TO DRG NO F 1301 047281 D WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG. NO. CC533-C TO DISTANCE TUBE OF 84 MM TPT TO DRG. NO. F 1301-047281 D (WITHOUT SURFACE TREATMENT)
C
Nonestab
4) MACHINING AND PROCESSING OF AL ROD 22 MM DIA TO PRODUCE CASE IN FINISHED CONDITION TO DRG PT NO IQX 318 WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF AL ROD 22 MM DIA +0.25 MM TO PRODUCE "CASE" IN FINISHED CONDITION TO DRG PT NO IQX-318 (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073200041 CHARGING VALVE ASSY TO DRG NO 2A46M C607 10C6[90]()
Specification : CHARGING VALVE ASSY TO DRG.NO.2A46M.C607-10C6.
C
Nonestab
2) 9073000994 SEALING RING TO DRG NO 2A46M 07 70 COPPER M2 IS 191 PT III 1980 FRTP 2[90]()
Specification : SEALING RING TO DRG.NO.2A46M-07-70 COPPER M2 IS:191 PT.III-1980-FRTP-2
C
Nonestab
3) 9073000327 DRAIN PIPE ASSY WITH DETAILS TO DRG NO GCF TM 383 G REF DRG NO 2A 26 C642 8 CB DS CAT NO 1015 004135[90]()
Specification : DRAIN PIPE ASSY WITH DETAILS TO DRG.NO. GCF-TM-383(G)(REF. DRG.NO.2A 26-C642-8-CB, DS.CAT NO.1015-004135)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953[90]()
1) PIPE REGULATING VALVE H. PUMP ASSY. TO DRG. NO. IAN 101 SA[90]()
Specification : PIPE REGULATING VALVE H. PUMP ASSY. TO DRG. NO. IAN 101 SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081002742 GAS FILLER UNIT ARTICLE NO 1120554 REF DRG NO GCF 50 39951A[90]()
Specification : 9081002742 GAS FILLER UNIT ARTICLE NO 1120554 REF DRG NO GCF 50 39951A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112084 PIPE HAND PUMP OIL TANK IAN 98 SA[90]()
Specification : PIPE HAND PUMP OIL TANK IAN 98 SA
C
Nonestab
2) 9069111535 CONDUIT ASSY METAL RIGID STEEL SEAMLESS TUBE 20MM ID 22MM ODTO DS CAT NO 5975 001457 CILSK 936[90]()
Specification : CONDUIT ASSY METAL,RIGID;STEEL SEAMLESS TUBE 20MM.ID-22MM OD TO DS CAT NO.5975-001457/CIL-SK-936
C
Nonestab
3) 9069112621 CONDUIT ASSY 5975 001408[90]()
Specification : CONDUIT ASSY 5975 001408
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112474 PANEL AIR CONTROL BRAKE L70 SP 106 TO DRG NO IAN 134A[90]()
Specification : 9069112474 : PANEL AIR CONTROL BRAKE (L70/SP/106) TO DRG NO IAN 134A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS 970 PT 1 1983 FOR CONVERSION IN CONTACT TO DRG 4 025998 059 TO SKETCH NO OTF S 011 BEFORE TIN PLATING OPERATION INPUT MATERIAL IC 0142007013 IC 9140070998[91]()
Specification : Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS:970 PT-1-1983 FOR CONVERSION IN CONTACT TO DRG. 4-025998 059 (TO SKETCH NO. OTF/S/011) BEFORE TIN PLATING OPERATION (INPUT MATERIAL I/C:0142007013) (IC:9140070998)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB[62]()
Specification : MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB[62]()
Specification : MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB
C
Nonestab
2) AIR PRESSURE REGULATOR IL-611-150-70K[72]()
Specification : AS PER DRG. AND SPECN
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122[90]()
Specification : 9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122
C
Nonestab
2) 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120[90]()
Specification : 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073100031 PAD ELEVATING CYLINDER FORGING TO DRG NO GCF MN 5417 A[90]()
Specification : PAD ELEVATING CYLINDER (FORGING) TO DRG.NO.GCF MN-5417 (A) (REF:DRG.NO.V548-0136-1027)FORGING SHOULD BE ULTRASONICALLY TESTED AS PER SPECN:IS:8791-1978 CLASS-A FOR CREAK DETECTION & FREE FROM INTERN AL & EXTERNAL DEFECTS.
PAD ELEVATIN
C
Nonestab
2) 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A[90]()
Specification : 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A
C
Nonestab
3) 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A[90]()
Specification : 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A
C
Nonestab
4) 9073100022 STEEL CASTING FOR CAP TO DRG NO GCF MN 5398 B[90]()
Specification : 9073100022 STEEL CASTING FOR CAP TO DRG NO GCF MN 5398 B
C
Nonestab
5) 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C[90]()
Specification : 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C
C
Nonestab
6) 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B[90]()
Specification : 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081577 SPANNER WRENCH TO DRG NO 5140 000205[90]()
Specification : 9080081577 SPANNER WRENCH TO DRG NO 5140 000205
C
Nonestab
2) 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119[90]()
Specification : 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119
C
Nonestab
3) 9080081479 SPANNER 44 A TO DRG NO 5120 003116[90]()
Specification : 9080081479 SPANNER 44 A TO DRG NO 5120 003116
2) ADOPTER LUBRICATING NIPPLE TO DRG. NO. 4730-006761[90]()
Specification : ADOPTER LUBRICATING NIPPLE TO DRG. NO. 4730-006761
C
Nonestab
3) SHAFT IFL-7962 TO DRG. NO. IFL-7962[90]()
Specification : SHAFT IFL-7962 TO DRG. NO. IFL-7962
C
Estab
4) NUT CASTLE TO DRG. NO. 5310-001483[90]()
Specification : NUT CASTLE TO DRG. NO. 5310-001483
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SET OF 8 TUBES FOR DHANUSH GUN[90]()
Specification : SET OF 8 TUBES FOR DHANUSH GUN CONSISTING OF DRG.NO.1134013
(ASSY DRG 5162892)(QTY.1NO),1134012(ASSY DRG NO-5162890),QTY
-1 NO),TUBE MATERIAL SS304,MAKE-PARKER/SWAGLOK,FITTING MAKE-
PARKER/VOSS,DRAWING
C
Nonestab
2) 9080081383 tube housing forgings and rough machining[70]()
Specification : DRG. NO. LFG/09/C/166
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PISTON ROD TO DRG NO 4024497[90]()
Specification : PISTON ROD TO DRG.NO.4024497.
C
Nonestab
2) SWIVEL FITTINGS CONNECTION[90]()
Specification : SWIVEL FITTINGS CONNECTION,THREADS R' ANGLE TO BOF STD NO.N15-377 DESIGN.N15-377-8-SR ARTICAL NO 10341202
E
Nonestab
3) PIPE HAND PUMP OIL TANK IAN 88 SA[90]()
Specification : PIPE,HAND PUMP/OIL TANK. IAN 88 SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SHAFT IFL 7962 TO DRG NO IFL 7962[90]()
Specification : SHAFT IFL 7962 TO DRG NO IFL 7962
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ARM CONTROL TO DESIGN NO CIA WPN 800 PT NO IAN 107A[90]()
Specification : ARM CONTROL TO DESIGN NO. CIA /WPN/ 800, PT. NO. IAN-107A COMPRISING OF DRG. NO. M2/ BOF- 5067132, 6151792 TO 6151800, 6166439, 6151811, 6151812, 62659038, 5067132, 4027766, IAN-317SA & N4-1, N4-18, N5-23, N9-8 N5-30, N2-87, N15-13, N15-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9910448142 PIPE ASSEMBLY TO PART NO IFL943 SA 4710040645[90]()
Specification : 9910448142 PIPE ASSEMBLY TO PART NO IFL943 SA 4710040645
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ELECTRO PNEUMATIC VALVE TO 6206791164[62]()
Specification : ELECTRO PNEUMATIC VALVE TO DRG NO. 219.09CB-319CB
C
Nonestab
2) PIPE LINE TO 6206421369[62]()
Specification : PIPE LINE TO DRG NO. CQA(HV)5.66.046
C
Nonestab
3) COCK WITH REDUCING VALVE TO 6206605104[62]()
Specification : COCK WITH REDUCING VALVE TO DRG NO. 527.08.70.0312
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) AUTOMATIC PRESSURE REGULATOR ADY 2C ASSY TO 6206213075[62]()
Specification : AUTOMATIC PRESSURE REGULATOR ADY 2C ASSY TO DRG NO.155.38.31CB-ACB
C
Nonestab
2) AIR SYSTEM TO 6201060001[62]()
Specification : AIR SYSTEM / 188.60SP-5
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIPE COUPLING AIR LINE 1015 000276[90]()
Specification : PIPE COUPLING AIR LINE 1015 000276
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056927 PINION AND GEAR ELEVATING TO DRAWING NO MI IMA 0072 C N[90]()
Specification : PINION AND GEAR ELEVATING TO DRAWING NO. MI/IMA-0072 C N
C
Nonestab
2) 9069112405 SHAFT ACTUATING LEVER TO DRAWING NO 5047139[90]()
Specification : SHAFT ACTUATING LEVER TO DRAWING NO 5047139
C
Nonestab
3) 9080081598 VALVE ASSEMBLY TO PART NO 1015 000639 IFL 849SA[90]()
Specification : VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073000394 LOCK WASHER TO DRG NO GCF TM 57 902 01 017 1 DS CAT NO 5310 015556[90]()
1) CUPRO NICKEL STRIP [SIZE:26-0.2 (W) MM X 0.4+0.03 (T) MM TO SPECN.[07]()
Specification : CUPRO NICKEL STRIP [SIZE:26-0.2 (W) MM X 0.4+0.03 (T) MM TO SPECN. BS EN 1652-1998,DESIGN CuNi25 WITH %BI RESTRICTED TO 0.002%. MATERIAL CONDITION R-290. OXIDATION, BEND AND DENT MARK SHOULD NOT BE PRESENT ON COIL SURFACE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PAPER BROWN (WAXED),280*195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT[14]()
Specification : PAPER BROWN (WAXED),280*195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013-REV.4 DC-5186-ME DT.19.03.14.
C
Nonestab
2) PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT[14]()
Specification : PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -1994:REV-4 DC NO-3732 ME DT.16.05.2002.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) 1. STEELROD 32MM DIA()
TN-14-1-2232-77 ML:003 DT 17.11.95
R
NOT ESTABLISED
Category : P
Grade : I,II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM[21]()
Specification /Drawing No.
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM SLEEVE FOR M-92[64]()
Specification/ Drawing No.
OFN/BMCS/M-92/PLASTIC FILM SLEEVE
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BRASS STRIP TO SIZE:18+/-0.2MM(W)* 0.7+/-0.01MM(T)[07]()
Specification : BRASS STRIP TO SIZE:18+/-0.2MM(W)* 0.7+/-0.01MM(T) TO BS:2870,CZ-106,1/4 HARD. OXIDIZATION, BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION: EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTH
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T)[07]()
Specification : COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "O". OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION: EACH ROLL OF STRIP SHOULD BE R
C
Nonestab
2) COPPER STRIP TO SIZE 10+/-0.2MM(W)* 0.1+0.02MM(T)[07]()
Specification : COPPER STRIP TO SIZE 10+/-0.2MM(W)* 0.1+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "1/2 H".OXIDIZATION,BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RA
Specification : COPPER STRIP, SIZE:20+/-0.1MM(W) X0.7+0.01MM (T) TO SPECN:BS EN 1652:1998 DESIGN Cu-ETP MATERIAL CONDITION R-220 (Cu ETP AND CW004A BOTH INDICATE THE SAME) OXIDIZATION, BEND & DENT MARK SHOULD NOT BE PRESENT ON THE COIL SURFACE. [PACKING
C
Nonestab
2) COPPER STRIP SIZE:13+/- 0.2MM(W)x0.35+0.02MM(T) TO SPECN[07]()
Specification : COPPER STRIP TO SIZE: 13+/-0.2MM (W) X0.35+0.02mm (T) TO SPECN.BS EN 1652:1998, MATERIAL SYMBOL CuETP MATERIAL CONDITION "R 220. OXIDIZATION, BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL SURFACE. [PACKING CONDITION : EACH COIL OF ST
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Pin straight headless for extractor to DS CAT no.- 5315-009195[70]()
Specification : AS PER DRG.
C
Nonestab
2) Drift Armourer Removing Dowel Sleeve in Finished Cond. To DS CAT No.-5120-007812[70]()
Specification : AS PER DRG.
C
Nonestab
3) Stopper Front in F/D Cond. To DSCAT No. 1005-007782[70]()
Specification : AS PER DRG.
C
Nonestab
4) Pin Grooved Headed for Hammer DS CAT NO. 5315-009190[70]()
Specification : AS PER DRG.
C
Nonestab
5) Pin Locking Pin Firing in F/D Cond. To DSCAT NO. 5315-010101[70]()
Specification : AS PER DRG.
C
Nonestab
6) Steel Blank plug Gas to Drg. No. SK-5217(Material will be supply by SAF against B/G) [70]()
Specification : AS PER DRG.
C
Nonestab
7) Housing Plunger in F/D Cond.to Drg no. ARDE SK-2825/33[70]()
Specification : AS PER DRG.
C
Nonestab
8) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186[70]()
Specification : AS PER DRG.
C
Nonestab
9) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K[70]()
Specification : AS PER DRG.
C
Nonestab
10) Tool Adjusting Sight in F/D Cond. To DSCAT no. 4933-000404[70]()
Specification : AS PER DRG.
C
Nonestab
11) Adopter for Cleaning of Bore by pull Through of Rifle 5.56 MM to Drg. No. CQA(SA)-180[70]()
Specification : AS PER DRG.
C
Nonestab
12) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567[70]()
Specification : AS PER DRG.
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-91[64]()
Specification/Drawing No.:
OFN/BMCS/M-91/M-92/PLASTIC FILM BAG
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) PLASTIC FILM BAG FOR M-91[64]()
Specification/Drawing No. :
OFN/BMCS/M91/M92/Plastic Film Bag
C
Nonestab
2) SELF ADHESIVE TAPE FOR M-91 OF 155 MM BMCS[25]()
Specification/Drawing No.
OFN/BMCS/M91/Igniter bag
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006[70]()
Specification : STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006
R
Nonestab
Category : s
Grade : Grade II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ALUMINIUM STRIP 25X0 point 5mm IS 737 DESIG 19500 LF 0615360000
Description : ALUMINIUM STRIP 25X0 point 5mm IS 737 DESIG 19500 LF 0615360000()
Specification : ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-2008 DESIG.19500 CONDITION 'O'
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ANODE TIN SIZE 203 X 152 X 6 MM LF 1582720862
Description : ANODE TIN SIZE 203 X 152 X 6 MM LF 1582720862()
Specification : ANODE TIN SIZE 203 X 152 X 6 MM THICK 99.9% PURITY TO SPECN:-IS-2384-1963.(REAFFIRMED 2016)
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104
Description : STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104()
Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI
Specification : COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300M
R
Nonestab
2) Copper Strip 24X0point3 mm IS 14811 O LF 0710261030
Description : Copper Strip 24X0point3 mm IS 14811 O LF 0710261030()
Specification : Copper Strip 24+/- 0.5mm X 0.3 +/-0.015mm thick in coils to specn:- IS:14811-2000 "O" condition, chemical comp. as per IS: 191-2007 grade Cu ETP. I/D of coil = to be kept opened weight of coil =5 to 10 kg
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) VARIOUS PLASTIC CRATES,POLYTHENE BAG
Description : VARIOUS PLASTIC CRATES,POLYTHENE BAG()
Specification : DIFFERENT SIZE AS PER REQUIREMENT
C
Estab
2) SHEET METAL ITEMS
Description : SHEET METAL ITEMS()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2
R
Estab
Category : p
Grade : 2
Size :
O
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432300004 TEFLON SHT[64]()
Specification : HEMRL /ED/PS/286
R
Nonestab
2) 6432300006 TEFLON SHT[64]()
Specification : HEMRL/PS/286
R
Nonestab
3) 6432300005 TEFLON SHT[64]()
Specification : HEMRL/PS/286
R
Nonestab
4) 6432300007 TEFLON SHT FILM[64]()
Specification : HEMRL/PS/286.
R
Nonestab
5) 6432300003 TEFLON SHT ERA PANEL[64]()
Specification : HEMRL/ED/PS/286,
R
Nonestab
Category : p
Grade : Grade III
Size :
S
387
Technological Production Co-operative Society Ltd.
74-B, Udyog Nagar, Kanpur UP
PIN1 : 208022
Phone No. : 0512-2296080, 2220038, 9839101979, 9839037763, Fax No.: 0512-2296080
GSTIN : 09AAAFT8657L1ZH
2) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]()
Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
C
Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Estab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
3) SUPPLY OF TRIGGER TO DS CAT NO 1005 001690 ICR 1238 DC NO 27044 SA DT 23 03 2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : SUPPLY OF TRIGGER TO DS CAT NO 1005-001690 (ICR 1238) DC NO 27044-SA DT. 23.03.2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED
R
Nonestab
4) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
5) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Estab
6) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()
Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025
C
Nonestab
7) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
2) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Nonestab
3) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT FRAME TO DRG. NO. 30P 1104[70]()
Specification : AS PER DRG OF FRONT FRAME TO DRG. NO. 30P 1104
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Estab
2) NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Estab
3) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Estab
4) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Estab
5) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Estab
6) PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Estab
7) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle
C
Estab
8) PLUG PIN FIRING 32P 1002[70]()
Specification : AS PER DRG PLUG PIN FIRING 32P 1002
C
Estab
9) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Estab
2) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Estab
3) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Estab
4) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Estab
5) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Estab
6) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Estab
7) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
8) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Estab
9) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
4) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
5) BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle
C
Nonestab
6) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
7) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL
E
Nonestab
8) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Nonestab
9) HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle
C
Nonestab
10) SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
11) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
12) DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL
C
Estab
13) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
14) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
15) PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
16) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle
C
Nonestab
17) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4008
C
Nonestab
18) DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.[42]()
Specification : AS PER DRAWING NO 32P 5003. REQD FOR UBGL
E
Nonestab
19) DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL[42]()
Specification : AS PER DRG NO 32P 5002. REQD FOR UBGL
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) CATCH MAGAZINE TO DRGNO 29P 0045STAR required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle
C
Nonestab
3) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
4) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
5) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
6) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Nonestab
7) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
6) SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
7) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.[70]()
Specification : AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
2) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
3) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR
C
Nonestab
4) COMPENSATOR 2016[70]()
Specification : COMPENSATOR TO PART NO. 2A42.02.016 WITH FIRM'S MATERIAL REQD FOR 30MM CANNON (C2016)DC NO. 18845-W DT. 13.01.2004 FOR DC LATEST ISSUE TO BE FOLLOWED
E
Nonestab
5) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL
C
Nonestab
6) Pawl belt holding to DSCAT NO 3040 003452 A5013 DC NO 27194 SA[70]()
Specification : Pawl belt holding to DSCAT NO 3040 003452 A5013 DC NO 27194 SA LF NO 7013998053
C
Nonestab
7) Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA[70]()
Specification : Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA for DC Latest to be followed Component to be manufactured through forging route required for 12.7mm AD Gun LF NO7013998055
C
Nonestab
8) Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO 27086 SA[70]()
Specification : Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO.27086 SA for DC Latest to be followed with firms material required for 12.7mm AD Gun LF No. 7013998061
C
Nonestab
9) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
10) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
11) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
12) SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
13) SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
2) Manufature and supply of CATCH COCKING HANDLE TO DS CAT NO 1005 001547 ICR 1287 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR RIFLE 7 62MM 1A1[70]()
Specification : AS PER THE SPECIFICATION GIVEN
E
Nonestab
3) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
4) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
5) MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR[70]()
Specification : MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR
C
Nonestab
6) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
7) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
8) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
9) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
10) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]()
Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material
R
Nonestab
2) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109[70]()
Specification : SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
4) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
5) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF EJECTOR BLANK DRG TEND 2795[70]()
Specification : SUPPLY OF EJECTOR BLANK TO DRAWING NO. TEND 2795 WITH FIRM'S MATERIAL WITHOUT HEAT TREATMENT AND PHOSPATING
C
Nonestab
Category :
Grade : Grade III
Size :
S
391
IMRANINDUSTRIES
115/51, First Floor Back side, shaik maistry street, royapuram Tamil Nadu
PIN1 : 600013
Phone No. : 25965145
GSTIN : 33AJAPM4287C2ZH
1) Fabrication of Trouser Drill White Suit Danger Building for Khamaria[21]()
Specification : FABRICATION OF TROUSER DRILL WHITE SUIT DANGER BUILDING FOR KHAMARIA
SPECIFICATION:
SWO PART No. 20137.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME O
E
Nonestab
2) FABRICATION CONTRACT OF MANILA SHIRT DRILL COTTON NAVY BLUE Hs QTY 2959 NOS[21]()
Specification : FABRICATION CONTRACT OF MANILA SHIRT DRILL COTTON NAVY BLUE
H/S –QTY –2959 NOS.
SWO PART II No. 20148 / 70148
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the fac
E
Nonestab
3) FABRICATION OF TROUSER DRILL COTTON WHITE QTY 2721 pairs[21]()
Specification : SWO PART II No. 20172 / 70172
SPECIFICATION NO:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
a. Cut Components and Garnitures will be supplied by the factory.
b. Sample will be provided at the time of fabri
R
Nonestab
4) Fabrication of JCD and TCD with Indian Army Logo 220GSM[21]()
Specification : OCFAV/Garment/001(c) for JCD and OCFAV/Garment/002(c) for TCD
E
Nonestab
5) FABRICATION OF ECAD PARACHUTE EIGHT POINT FIVE METRE SD MADE WITH BLENDED FABRIC 67 IS TO 33 PC AND 100 PERCENTAGE POLYESTER[21]()
Specification : IND/TC/2694 WITH AMENDMENT 1,2 &3
E
Nonestab
Category :
Grade : Grade III
Size :
S
392
DAS FURNITURE
111, BANERJEE PARA ROAD, P.O.: NAIHATI, DIST.: 24 PARGANAS(NORTH) WEST BENGAL
PIN1 : 743165
Phone No. : O33-25023786,FAX:033-25812755, MOB:09433812711
GSTIN : 19ADSPD7062L1ZY
10) CYLINDER NO. 309 MK 2, DRG NO. IA 414/1 SPECN. IA 1163()
IA 1163
E
Not Estab.
11) CYLINDER NO. 293 MK-3 TO DRG.NO. AFK/SK-281-05 TO DRG.NO. AFK/SK-288-05()
DRG.NO. AFK/SK-281-05 TO DRG.NO. AFK/SK-288-05
E
Not Estab.
12) CYLINDER 4A TO DRG. NO. CIA/AMN/54 PT. NO. ISV 281A SPECN. IA 1163()
IA 1163
E
Not Estab.
13) CYLINDER NO. 224 MARK V (A/N) EMPTY (SUB-ASSY) TO DRG. NO. ARM 1478 A4 DT. 29-10-90()
DRG. NO. ARM 1478 A4
E
Not Estab.
14) CARRIER AMMN 13A STEEL TO DES.REF NO CIA/AMN/2198 PT NO ISV 488A SHT-1 SPECN. IA 1169()
IA 1169
E
Not Estab.
15) AMMUNITION CONTAINER (BOX) H 2 A/L STEEL, DES. REF. CIA/AMMN/468,PT. NO. ISV 296-A SPECN. IA 1169()
IA 1169
E
Not Estab.
16) CARRIER 7 A/L TO DESIGN. REF. CIA/AMN/1165 PT. NO. ISV 355A SPECN. IA 1169()
IA 1169
E
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX C 28 A STEEL[65]()
Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A
C
Nonestab
2) BOX G 70 MK1(STEEL)OLIVE GREEN.[65]()
Specification : IA 1169
C
Nonestab
3) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()
Specification : IA 1169
C
Nonestab
4) BOX B 184 MK 1 W/O SEPARATOR[65]()
Specification : IA 1169
C
Nonestab
5) BOX NO S-8 MK-1 (EMPTY ASSEMBLY) TO DRG NO. NASK 875 (PROV)[63]()
Specification : DRG NO. NASK 875 (PROV)
C
Nonestab
6) BOX STEEL NO. S 6 MK1 DRG.ARDE 2225[65]()
Specification : DRG. NO. ARDE 2225 SHEET NO.3
C
Nonestab
7) CARRIER 6A/L,STEEL,TO DESIGNER'S REF CIA/AMN/1162,PART NO.ISV 354-A,SPECN IA 1169 DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC:220[65]()
Specification : IA 1169
C
Nonestab
8) CYLINDER NO 80 A MK[65]()
Specification : IA-1163
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BOX H 60 MK I NEW W O FMT ARMY and NVL LF 6570010000
Description : BOX H 60 MK I NEW W O FMT ARMY and NVL LF 6570010000()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Metallic Container For Charge 9[25]()
Specification : Drg No.4085561 DC 35637 CQA AMMN OF Dtd17.02.93 LEAK TEST AS PER SPECN. IA-1169(N), DC-35707-A DT.05.5.94
R
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Metallic Container For Charge 9[25]()
Specification : Drg No.4085561 DC 35637 CQA AMMN OF Dtd17.02.93 LEAK TEST AS PER SPECN. IA-1169(N), DC-35707-A DT.05.5.94
R
Nonestab
2) METALLIC CONTAINER -M4A2 (SER)[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Nonestab
3) BOX-C 27-A (SER)TIN PLATE[65]()
Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Nonestab
4) Cylinder 12 A Steel for Ammunition , Container Assembly 117 A[14]()
Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.
R
Nonestab
5) CYLINDER 443 MK 1/L[65]()
Specification : GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO
R
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX C 18A STEEL[42]()
Specification : SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A
R
Nonestab
2) BOX G 70 STEEL[42]()
Specification : AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA
DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A
AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.
R
Nonestab
3) Case C-128 MK-13 / L(SER)[65]()
Specification : CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).
R
Nonestab
4) M S PLATE SZ 3 MM PHOSPATED[42]()
Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
R
Nonestab
5) STD CASSETTE CONTAINER[42]()
Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8
R
Nonestab
6) SPECIAL CASSETTE CONTAINER[42]()
Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Metallic Container For Charge 9[25]()
Specification : Drg No.4085561 DC 35637 CQA AMMN OF Dtd17.02.93 LEAK TEST AS PER SPECN. IA-1169(N), DC-35707-A DT.05.5.94
R
Nonestab
2) METALLIC CONTAINER -M4A2 (SER)[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Nonestab
3) BOX-C 27-A (SER)TIN PLATE[65]()
Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Nonestab
4) Cylinder 12 A Steel for Ammunition , Container Assembly 117 A[14]()
Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.
R
Nonestab
5) CYLINDER 443 MK 1/L[65]()
Specification : GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO
R
Nonestab
6) BARRELS 200 LITRES[14]()
Specification : BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Nonestab
2) TUBE FOR HAND FLARE RED [64]()
Specification : DRG.NO. OFDR/CT/1/11/A3.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]()
Specification : CQA(A) 2328
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOX B 184[65]()
Specification : DRG. NO. IA-646 PT. NO. ISV 91A
C
Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
3) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
C
Nonestab
4) BODY UPPER FLASH 2A TO DRG NO ARDE 2285 DET NO 1 PART NO ITV 276 DC 36057A DT 28 121995 AND BODY LOWER FLASH 2A TO DRG NO ARDE DET NO 2 PART NO ITV277 DC 36550A DT 13041999[62]()
Specification : DC-36057A DT 28.12.1995
DC -36550A DT 13.04.1999
C
Nonestab
5) CONTAINER FOR BSO[62]()
Specification : CONTAINER TO DRG NO.OFDR/CT/1/M1/A3AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN. NO. DGOF/OFDR/008.
R
Nonestab
6) SET OF 5 COMPONENTS FOR IGNITER PINAKA[61]()
Specification : SET OF 5 COMPONENTS FOR IGNITER PINAKA MK-II GUIDED DRG. NO. HEMRL/IGN/PIN MK-II/24 (1) CANISTER DET NO.3 (2) SQUIB HOLDER DET NO.4 (3) IGNITER CLOSURE DET.NO.11 (4) 'O' RING DET NO.13 (5) RETAINER DISC DET NO.14
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) HANDLE AND HANDLE CLIP ASSEMBLY[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
2) CARRYING LINK[99]()
Specification : DRG.NO OFB/C/1540
E
Nonestab
3) Hinge[99]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
4) HANDLE[99]()
Specification : AS PER O.F.BSL DRAWING/SPECIFICATION
E
Nonestab
5) BOTTOM CORNER PIECE FOR BOX C-53[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING
E
Nonestab
6) CATCH[99]()
Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.
E
Nonestab
7) Handle with Handle Clip for Box C-53A[99]()
Specification : AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
8) BRACKET A-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
9) BRACKET A-2 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
10) CENTER PARTITION FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
11) BOTTOM FRAME FOR CARRIER 13A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
12) TOP FRAME FOR CARRIER 13A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
13) HINGE - AS PER DRG. NO. OFB/C/1565[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
14) BRACKET B-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
C
Nonestab
15) Bracket B-2 for Box C-53 A[99]()
Specification : As per O.F.Bhusawal Drawing/Specification
E
Nonestab
16) ENGAGING PLATE FOR BOXH2A[99]()
Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.
E
Nonestab
17) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
18) BRACKET CARTRIDGE REAR FOR BOX C53[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
19) BRACKET END FOR SHELL FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
20) BRACKET FOR AMMN. BOX SM 601C[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
21) PIECE PACKING FOR BOX SM 601[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
22) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
23) CHANNEL - FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
C
Nonestab
24) LID CORNER PIECE FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
25) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
26) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]()
Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969
E
Nonestab
27) BRACKET CARTRIDGE FRONT FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
28) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]()
Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067
E
Nonestab
29) PIECE PACKING 'B'[99]()
Specification : AS PER DRG NO. OFB/C/1541
E
Nonestab
30) PIECE PACKING 'A'[99]()
Specification : PIECE PACKING 'A' AS PER REF. PART NO. ISV1820
6) DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD
Description - DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD()
DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD TO JSS-9310-01 -2014 , REV-3, DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN. JSS-8135-11-2008 (REVISION NO.2) DC NO.3553-ME, DT. 12.3.99 REF DRG.NO.4-027043 P-A00E14-79
C
Estab
7) LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY
Description - LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY()
LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY.
C
Estab
8) PAPER TUBE (AP/T) ID-17A5mm x OD-18.1C5mm x L-19.5B8Amm
Description - PAPER TUBE (AP/T) ID-17A5mm x OD-18.1C5mm x L-19.5B8Amm()
MATERIAL SPECN. PAPER CRAFT AMMN. TO JSS 8135-017-2002, REAF.-2010 DC NO. 5016-ME, DT-16.03.11.
C
Estab
9) CAP K3-2
Description - CAP K3-2()
CAP K3-2 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2854, DC NO. 37271-A, DT.08.11.10. SCANNED ON DT. 05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN AND SHAPING OR BURRS SHOULD BE THERE.
C
Estab
10) CUP Y1-3
Description - CUP Y1-3()
CUP Y1-3 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2855, DC NO. 37271-A, DT.08.11.10. SCANNED ON DT. 05.01.11. HEIGHT SHOULD BE FROM 1.30 MM TO 1.40 MM. OUTSIDE DIAMETER SHOULD BE 2.35 MM TO 2.38 MM. NOTE- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED,
C
Estab
11) ANVIL TO DRG NO 9 0643
Description - ANVIL TO DRG NO 9 0643()
ANVIL TO DRG.NO.9-0643/9- -104/3, DC36309-A, DT.14.7.97.
C
Estab
12) CAP TO DRG NO 9 0643
Description - CAP TO DRG NO 9 0643()
CAP TO DRG.NO.9-0643/9- -104/1, DC.34183-A, DT-28.7.87.
C
Estab
Category : p
Grade : 3
Size :
S
395
RAGHAVENDRA APPAREL
NO.2, P.S.V.KALYANAMANDAPAM DEVARAJAPURAM, PATTABIRAM, CHENNAI Tamil Nadu
PIN1 : 600072
Phone No. : 9940084194
GSTIN : 33ADUPR9570M1ZH
1) Body with Insulation to GSF Sketch No OTF DD 023 for Fuze B 15[62]()
Specification : Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15
C
Nonestab
2) MOULDING ASSEMBLY OF BODY WITH CONTACT[62]()
Specification : MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PIEZO ELECTRIC GENERATOR ASSY[99]()
Specification : PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203
C
Nonestab
Category :
Grade : Grade III
Size :
L
398
CIPET: Centre for Skilling and Technical Support, Madurai
Survey No 489/1 Near Periyar Samathuvapuram, Thiruvadavur Madurai Tamil Nadu
PIN1 : 625110
Phone No. : 2424227
GSTIN : 33AAAAC0606R3ZU
Specification : INNER LINING KNITTED FABRIC (OUTER JACKET) POLYESTER 145 GSM WIDTH 150 CM. (MIN.) PANTONE SHADE NO. 19-0516 TPX
SPECIFICATION :- AS PER APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) POLYESTER KNITTED FABRIC ONE SIDE SINGLE JERSEY AND ONE SIDE PILE KNITTED FAB IN BLACK COLOR LAMINATED WITH PU FOAM[21]()
Specification : POLYESTER KNITTED FABRIC ONE SIDE SINGLE JERSEY AND ONE SIDE PILE KNITTED FAB IN BLACK COLOR LAMINATED WITH PU FOAM
AS PER CLAUSE 4.1 (PAGE No 3-4) OF PROVISIONAL SPECIFICATION DMSRDE/FF&IT/2007/466/2(b)
NOTE:- Mass of P U Foam with with
