List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
401 Arjan Dass and Sons Pvt Ltd
135/15 Girish Ghosh Road. Belurmath, Howrah Girish Ghosh road Howrah West Bengal
PIN1 : 711202
Phone No. : 9830061106
GSTIN : 19AAGCA1944A1Z2 		AAGCA1944A

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]() Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)[02]() Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 . R Nonestab
2) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165[01]() Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R R Nonestab
3) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]() Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE R Nonestab
4) STEEL ROD 32MM GOST TY14 1 2232 77 LF 0144101032[01]() Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED R Nonestab
5) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)[01]() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A R Nonestab
6) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)[01]() Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18. R Nonestab
7) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)[01]() Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s R Nonestab
8) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)[01]() Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO R Nonestab
9) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)[01]() Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS. R Nonestab
10) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]() Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st R Nonestab
11) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK R Nonestab
Category :
Grade : Grade III
Size : S
402 VSSP ENGINEERING PRIVATE LIMITED
D/11-A, PHASE IV EXTENSION JEEDIMETLA Rangareddi Telangana
PIN1 : 500055
Phone No. : 9394761823 		AAAAA1234B

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL C Nonestab
2) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
3) SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL E Nonestab
4) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY) C Nonestab
5) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]() Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION C Nonestab
6) AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL[70]() Specification : AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL E Nonestab
7) CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2[70]() Specification : AS PER DRAWING OF CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2 C Nonestab
8) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Mounting 81MM Mortar E 1 General Assembly to Part No AMG 72895 DS CAT No 1015 001480 Drgs Specifications of Sub Assemblies Components as per Annexure No 81MM MOR ODC Annexure 002 for assembly of 81MM Mortar Ordnance[63]() Specification : Mounting, 81MM Mortar E-1 (General Assembly) to Part No. AMG 72895 (DS CAT No. 1015-001480), Drgs, Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/Annexure/002 for assembly of 81MM Mortar Ordnance C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Loading System as per drg no 176 6000 consisting of Rammer Assembly as per drg no 176 6003 and Rammer Tray Assembly as per drg no 176 6004 Drg Specifications of sub assemblies components as per Annexure Sharang ODC Anne 001 Enclosed[65]() Specification : For more details regarding tender visit www.ofbeproc.gov.in C Estab
Category :
Grade : Grade III
Size : S
403 Austin Engineering Company Limited
Vill - Patla, Tal - Bhesan, Via Ranpur (Sorath), Hadmatiya, District - Junagadh Gujarat
PIN1 : 362030
Phone No. : 02873-252223
GSTIN : 24AABCA8189N1Z6 		RKTA00811G

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) Single Row Radial Ball Bearing() As per drawing E Established
2) Needle Roller for Bearing() As per drawing E Established
3) Bearing Roller GPZ() As per drawing E Established
4) Cylindercal Rollers() As per drawing E Established
5) Bearing Double Groove() As per drawing E Established
6) Deep Grove and Angular Contact Ball Bearing() As per drawing E Established
7) Roller() As per drawing E Established
8) Thrust Ball Bearing with Flat Scat() As per drawing E Established
9) BEARING 941/15() DRG.NO.GOST:4060(941/15) C Non Established
10) BEARING 80018() DRG.NO. GOST: 7242 C Non Established
11) BEARING 941/15() DRG.NO. GOST:4060(941/15) C Non Established
Category : P
Grade : I
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) BALL BEARING 6205Z () 60205K GOST 7242-70 C Estab.
2) DEEP GROOVE SINGLE BALL BEARING () 208 C Estab.
3) DOUBLE ROLW SPECIAL ROLLER BEARING () 3608 C Estab.
4) RADIAL CYL ROLLER BEARING () 32208 C Estab.
5) BEARING 92305 M () ND C Estab.
6) BEARING 12302 B1 () ND C Estab.
7) BEARING 210 () ND C Estab.
8) BEARING 25-207 BTI () ND C Estab.
9) BEARING 292208 M () ND C Estab.
10) BEARING 292228 MT () ND C Estab.
11) BEARING 30-92224 MT () ND C Estab.
12) BEARING 42305 M () ND C Estab.
13) BEARING 6-112 L () ND C Estab.
14) BEARING 6-36207 L () ND C Estab.
15) BEARING 6-204 () ND C Estab.
16) BEARING 70-42205DI () ND C Estab.
17) BEARING 92305 M () ND C Estab.
18) DEEP GROOVE S/ROW BALL BEARING 205K () ND C Estab.
Category : P
Grade : II
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BEARING part no X 0204610 Description : BEARING part no X 0204610() Specification : BEARING part no X 0204610 (L.F. no.:- 9013110430000) C Estab
Category : dp
Grade : 2
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BEARING part no X 0204610 Description : BEARING part no X 0204610() Specification : BEARING part no X 0204610 (L.F. no.:- 9013110430000) C Estab
Category : dp
Grade : 2
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Cyl Roller Bearings JC8005[90]() Specification : Cyl. Roller Bearing (JC 8005) C Estab
Category : p
Grade : Grade III
Size : M
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) Cage Roller Bearing Description : Cage Roller Bearing() Specification : As per GCF/Drg/Size/specn/IS/BS C Estab
Category : p
Grade : 3
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) ROLLER BEARING NJ2210E Description : ROLLER BEARING NJ2210E() Specification : ROLLER BEARING NJ2210E C Estab
2) NEEDLE ROLLER BRG NK90 25 Description : NEEDLE ROLLER BRG NK90 25() Specification : NEEDLE ROLLER BRG. NK90/25 C Estab
3) CYL ROLLER BRG NS 1911 Description : CYL ROLLER BRG NS 1911() Specification : CYL.ROLLER BRG.(NS-1911) C Estab
4) Needle Roller Brg. NK 55/35-X0202410 Description : Needle Roller Brg. NK 55/35-X0202410() Specification : Needle Roller Brg. NK 55/35 DRG./PT. NO. - X0202410 C Estab
Category : p
Grade : 3
Size : M
404 Saturn Enterprises
G-15, Bajrangbali Industrial Estate, Near Panki, Site-4, Kanpur, Uttar Pradesh
PIN1 : 208022
Phone No. : 8933999444
GSTIN : 09AALPA8171F1ZO 		KNPS02543C

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) FOUR WAY MILD STEEL JOINT() PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R
2) THREE WAY MILD STEEL JOINT WITH BASE PLATE () PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R
3) THREE WAY ROOF POLE MILD STEEL JOINT () PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R
4) Fabrication of Pack with Aluminum Frame(Modified) () AS PER REQUIREMENT & SPECIFICATION R
5) Trade Fabrication of Bag Kit Universal with PV Dope Dyed Fabric OG() AS PER REQUIREMENT & SPECIFICATION R
6) Dees Steel Various () AS PER REQUIREMENT & SPECIFICATION R
7) Fabrication of Capes W.P. OG/Khaki() AS PER REQUIREMENT & SPECIFICATION R
8) Fabrication of End Curtain of TEFS 4M/2M (Army) (Each set consisting of two(2) numbers)() AS PER REQUIREMENT & SPECIFICATION R
9) Fabrication of TEFS 4M Fly Inner() AS PER REQUIREMENT & SPECIFICATION R
10) Fabrication of Net Mosquito R/M Poly. Khaki with Calico Border() AS PER REQUIREMENT & SPECIFICATION R
11) Fabrication of Short PV Dope Dyed Khaki() AS PER REQUIREMENT & SPECIFICATION R
12) Trade Fabrication of Net Mosquito White Poly F/R A/F () AS PER REQUIREMENT & SPECIFICATION R
13) Fabrication of Bag Carrying Rescue() AS PER REQUIREMENT & SPECIFICATION R
14) Fabrication of Carrier Man Pack() AS PER REQUIREMENT & SPECIFICATION R
15) Trade Fabrication of Bag Sleeping MK-4() AS PER REQUIREMENT & SPECIFICATION R
16) Trade Fabrication of Bag Sleeping Offier Camp kit A/F() AS PER REQUIREMENT & SPECIFICATION R
17) Fabrication of Tent Extendable Fly Outer 2M unit() AS PER REQUIREMENT & SPECIFICATION R
18) Fabrication of Synthetic Web Equipment ICK Pouches Ammunition() AS PER REQUIREMENT & SPECIFICATION R
19) Fabrication of Bag Kit Universal(New Pattern) A/F() AS PER REQUIREMENT & SPECIFICATION R
20) Fabrication of Haversack All Rank() AS PER REQUIREMENT & SPECIFICATION R
21) Fabrication of Canopy Body (Tarpaulin)() AS PER REQUIREMENT & SPECIFICATION R
22) Fabrication of Lt. Wt. Pouches Basic() AS PER REQUIREMENT & SPECIFICATION R
23) Fabrication of Ground Sheet Lt. Wt. OG () AS PER REQUIREMENT & SPECIFICATION R
24) Fabrication of Syn Belt Waist (ICK)() AS PER REQUIREMENT & SPECIFICATION R
25) Fabrication of Roll Bedding() AS PER REQUIREMENT & SPECIFICATION R
26) Fabrication of Cover Water Proof 9.1*9.1 Mtr.() AS PER REQUIREMENT & SPECIFICATION R
27) Fabrication of Mattress Kapok MK-2() AS PER REQUIREMENT & SPECIFICATION R
28) Fabrication of Screen Latrine Bag MK-3() AS PER REQUIREMENT & SPECIFICATION R
29) Trade Fabrication of Bag  3 A/L() AS PER REQUIREMENT & SPECIFICATION R
30) Trade Fabrication  of Accessary Bag to DS CAT No. M/84600005 with all fittings() AS PER REQUIREMENT & SPECIFICATION R
31) Fabrication of fabric piece Embedded with Nylon/Poly Propline Beads for  Bag Carring Rescue() AS PER REQUIREMENT & SPECIFICATION R
32) Eyeleting Operation of Tent 4M Outer through Trade Assistance() AS PER REQUIREMENT & SPECIFICATION R
33) Fabrication of Tent Arctic Large() AS PER REQUIREMENT & SPECIFICATION R
34) CLIP IRON (FOR TENT EXTENDABLE)() CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED. R
35) PIN TENT CARBON STEEL SMALL 8340-000508() AS PER REQUIREMENT & SPECIFICATION R Non Established
36) D RING VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
37) 8340-001117, FOUR WAY JOINT FOR TENT EXTENDABLE FRAME SUPPORTED () AS PER REQUIREMENT & SPECIFICATION R Non Established
38) 8340-001118, THREE WAY JOINT FOR ROOF POLE FOR TENT EXTENDABLE FRAME SUPPORTED() AS PER REQUIREMENT & SPECIFICATION R Non Established
39) 8340-01116, THREE WAY JOINT WITH BASE PLATE FOR TENT EXTANDABLE FRAME SUPPORTED() AS PER REQUIREMENT & SPECIFICATION R Non Established
40) LID CAP TANK MULE MK-4() AS PER REQUIREMENT & SPECIFICATION R Non Established
41) LINK (40X19X6MM DIA)() AS PER REQUIREMENT & SPECIFICATION R Non Established
42) LOOP PIN() AS PER REQUIREMENT & SPECIFICATION R Non Established
43) ROOF POLE WITH THREE WAY JOINT (FOR TENT EXTENDABLE) () AS PER REQUIREMENT & SPECIFICATION R Non Established
44) U PIN() AS PER REQUIREMENT & SPECIFICATION R Non Established
45) CHAIN FOR POLE DOOR ALLUMINIUM ALLOY. DRG NO. SK-1000() AS PER REQUIREMENT & SPECIFICATION R Non Established
46) CHAIN FOR POLE STANDING ALUMINIUM ALLOY. DRG.NO. SK-1001() AS PER REQUIREMENT & SPECIFICATION R Non Established
47) CLIP END STRAP BRASS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
48) HING COMPLETE ASSEMBLED WITH LINK AS PERDRG.NO.SE-232 DET.5() AS PER REQUIREMENT & SPECIFICATION R Non Established
49) HING WITH LINK COMPLETE ASSEMBLED AS PERDRG.NO.SE-221 OF SHEET 2/2 DET 6() AS PER REQUIREMENT & SPECIFICATION R Non Established
50) HINGE COMPLETE ASSEMBLED WITH LINK AS PER DRG. NO. SE 113 DET 16 & 17 FOR CARRIER 6 A/L() AS PER REQUIREMENT & SPECIFICATION R Non Established
51) PIN TENT ANGLE IRON MED.MK-2() AS PER REQUIREMENT & SPECIFICATION R Non Established
52) PIN TENT ANGLE IRON MED.MK-II() AS PER REQUIREMENT & SPECIFICATION R Non Established
53) RUNNER() AS PER REQUIREMENT & SPECIFICATION R Non Established
54) RUNNER ALUMINIUM FOR TENT() AS PER REQUIREMENT & SPECIFICATION R Non Established
55) RUNNER BRASS() AS PER REQUIREMENT & SPECIFICATION R Non Established
56) SPRING CLIP COMPLETE ASSEMBLED WITH LINKWITHOUT STRAP FOR BOX C -18() AS PER REQUIREMENT & SPECIFICATION R Non Established
57) TENT DEES IRON 25MM X20MM X4MM() AS PER REQUIREMENT & SPECIFICATION R Non Established
58) TENT PIN ANGLE IRON MEDIUM() AS PER REQUIREMENT & SPECIFICATION R Non Established
59) WASHERS STEELS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
60) WASHERS COPPER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
61) WASHERS BRASS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
62) HEATER SPACE OIL BURNING-CONTROL VALVE BODY() AS PER REQUIREMENT & SPECIFICATION R Non Established
63) LOOP PIN() AS PER REQUIREMENT & SPECIFICATION R Non Established
64) BUCKLES BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
65) BUCKLES IRON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
66) CHIMNEY SEGMENT OR ELBOW() AS PER REQUIREMENT & SPECIFICATION R Non Established
67) WING NUT WITH BRACKET() AS PER REQUIREMENT & SPECIFICATION R Non Established
68) HANDLE CLIP FOR BOX C-18() AS PER REQUIREMENT & SPECIFICATION R Non Established
69) BURNER FOR H.S.O.B. AS PER DRG. NO. 5881/P SHEET NO 6() AS PER REQUIREMENT & SPECIFICATION R Non Established
Category : P
Grade : III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) Fabrication of Coat Combat Disruptive with Det. Lining Army Logo() As per Specification R Not Estab.
2) Fabrication of Trouser Combat Poly Disruptive with Army Logo() As per Specification R Not Estab.
3) Fabrication of Jacket Combat Poly Disruptive with Army Logo() As per Specification R Not Estab.
4) Fabrication of Trouser and Shirt Plain Weave PV DDOG() As per Specification R Not Estab.
5) Fabrication of END Curtain of TEFS 4M/2M (Army)() As per Specification R Not Estab.
6) Fabrication of TEFS 2 & 4M Fly Inner() As per Specification R Not Estab.
7) Fabrication of Tent Extendable Fly outer 2M & 4M Unit() As per Specification R Not Estab.
Category : P
Grade : III
Size : S
405 Sagar Enterprises
A 9, Pavna Industrial Premises, T - 204, MIDC, Bhosari T - 204 MIDC. Pune Maharashtra
PIN1 : 411026
Phone No. : 29525585
GSTIN : 27BNEPS0038J1ZW 		PNEU06480F

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BAFFLE PLATE FOR 81MM ILLG. MK-II[63]() Specification : DRG. NO. ARDE 1965 DET 15 PT.NO. ITV 125, DC 37039A DT. 25.01.2006 C Nonestab
2) Container Star for 81mm Illg. MK-II[62]() Specification : SPECN:CQA(A) NO.2345(C) DRG NO ARDE 1965 DET 12 PT NO ITV 122 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) WASHER CUPPED FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA(A) 2321(b) DRG. NO. ARDE-2011 DET.15 C Nonestab
2) MAIN PARA.HOUSING FOR 120MM ILLG.[63]() Specification : DRG.NO. ARDE 2011 DET NO. 19 PARTNO. ITV 149 DC (I) 34732 - A DATED 30-09-1989 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b) DC NO.36952-A DT.16-03-04. C Estab
3) SET OF 8 COMPONENTS FOR SHELL 105MM SMOKE[62]() Specification : DRG. NO. CQA(A) 4921 C Nonestab
4) STAR HOUSING FOR 120MM ILLG.[63]() Specification : DRG. NO. ARDE-2011 DET 13 PT NO. ITV-144 SPECN. NO. CQA(A)2321(b) C Nonestab
5) BODY & BOTTOM FOR FOG SIGNAL[64]() Specification : DRG. NO. OFDR/FOG SIGNAL/37/A1 AMDT NO. 185 DT. 24/5/2011 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CUP HALF (ALU) FOR BOMB 81MM ILLG. MK-II[62]() Specification : CUP HALF ASSY. TO DRG. NO. ARDE 2222, PT NO. ITV 257 SHT-1 AND CUP HALF TO DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2 C Nonestab
2) CUP FOR 51 ILLG.[62]() Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]() Specification : CQA(A) 4928 C Nonestab
Category :
Grade : Grade III
Size : S
406 MITTAL APPLIANCES LIMITED
UNIT NO. 13, 1ST FLOOR, SWASTIC INDUSTRIAL ESTATE, 178, VIDYANAGARI MARG, KALINA MUMBAI MAHARASHTRA
PIN1 : 400098
Phone No. : 7770895777
GSTIN : 23AABCM1903A1ZF 		BPLM04214A

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARTRIDGE CASE FOR 16 MM RED () DRG.NO. ARDE 1878 DET 1PT. NO. IQW151 SPECN.NO.CQA (A) 3811 (h) C Not Estab.
2) CARTRIDGE CASE FOR 16 MM GREEN () DRG.NO. ARDE 1878 DET 1 PT.NO.IQW-151 SPECN.NO.CQA (A) 3811 (h) C Not Estab.
3) CARTRIDGE CASE FOR 16 MM WHITE () DRG.NO. ARDE 1878 DET 1 PT.NO.IQW-151 SPECN.NO.CQA (A) 3811 (h) C Not Estab.
4) ADAPTER NOSE FOR 81MM INERT/FLASH () DRG.NO. DD(L)11855. PART TV-44 C Not Estab.
5) DELAY CASING EMPTY 14.5MM 3 & 6 SEC() DRG.NO.04-749-130226-02. IE. SPECN .04-749-0021-008 C Not Estab.
6) CARRIER AMMUNITION 16A() DRG NO. ARDE 2224 SHEET NO. 2 PT NO ISV 550A SPECN NO IA 1169 (n) C Not Estab.
7) ADAPTER NOSE FOR 81MM ILLG.() DRG NO. ARDE 1965 DET 4 PT NO ITV 114 SPECN CQA(A) 2345 (C) C Not Estab.
8) BAFFLE PLATE FOR 81MM ILLG. MK-II() DRG. NO. ARDE 1965, DET 15, PT NO. ITV 125 C Not Estab.
9) BASE PLATE FOR BOMB 81MM ILLG.() DRG. NO. ARDE 1965 DET 13 PT NO ITV 123 SPECN CQA(A) 2345 (C) C Not Estab.
10) CONTAINER STAR FOR BOMB 81MM ILLG.() DRG. NO. ARDE 1965 DET 12 PT NO ITV 122 SPECN CQA(A) NO.2345(C) C Not Estab.
11) CUP HALF ALLUM FOR BOMB 81MM ILLG.() DRG. NO. ARDE 2222, PT NO. ITV 257 Sht-1 & Sht-2 C Not Estab.
12) CONTAINER WITH DISC FOR BOMB 81 MM ILLG. MK-II() DRG. NO. CIA/AMMN/811, PT.NO.ITV 6A & PT. NO. ITV 24 SPECN. NO.CQA(A) 2303 (F) C Not Estab.
13) CUP FOR 51MM ILLG. () DRG. NO. ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Not Estab.
14) DELAY TUBE FOR 51MM ILLG. () DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Not Estab.
15) WASHER COPPER FOR 105 MM ILLG.() DRG.NO. D 6 P-A-180/1/3,PT NO.ISX 344 C Not Estab.
16) SET OF 8 COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A/IFG COLOR SMOKE BE 3A() CQA(A) 4921 C Not Estab.
17) SET OF 8 COMPONENTS FOR SHELL 105MM COLOR SMOKE ORANGE() CQA(A) 2346(c) C Not Estab.
18) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG. 2A COMPRISING OF 9 COMPONENTS() CQA(A) 4928 C Not Estab.
19) HALF CUP FOR 120MM ILLG.() DRG.NO.CIA. AMN/2158 PART NO.ISV1740 C Not Estab.
20) STAR HOUSING FOR 120MM ILLG.() DRG. NO. ARDE 2011, DET 13 PT.NO. ITV-144 SPCEN.NO. CQA(A)2321 (b) C Not Estab.
21) WASHER (BRASS) FOR FUZE T&P DA NO 213 P MK5 (M2) (FILLED)() DRG.NO. S5/7806/F/621 PART NO QX 1247 C Not Estab.
22) BODY & BOTTOM FOR FOG SIGNAL() DRG. NO. OFDR/FOG SIGNAL/37/A1 AMDT NO. 185 DT. 24/5/2011 C Not Estab.
23) TIN ZINC WASHER 12.7 OD FOR 16 MM () WASHER (80/20 TIN ZINC ALLOY) O.D.12.7 MM ,I.D.9.52 MM AND THICKNESS 0.508 MM. DRG. NO. OFDR/MF-2/R5 C Not Estab.
24) TIN ZINC WASHER 21.08 FOR 1"G/IULL() WASHER STAR (80/20 TIN ZINC ALLOY): O.D. 21.08 0.13MM; I.D. 6.35; THICKNESS 0.51MM DRG.NO.DD(L)15976 PART NO.QW 7AF C Not Estab.
Category : P
Grade : I
Size : S
1) Metal and Steel Factory
Name Specification Use Status
1) BRASS PIG 60:40,COMPOSITION Cu: 56.5 - 62% ,Pb : 1.00% MAX. Fe % : O.10 MAX,Sb% : O.02 MAX,Zn % : REMINDER, TOTAL IMPURITIES % : O.50 MAX (EXCLUDING Cu % ,Pb % & Zn % ) AS PER SCOPE OF SUPPLY.[07]() Specification : BRASS PIG 60:40,COMPOSITION Cu: 56.5 - 62% ,Pb : 1.00% MAX. Fe % : O.10 MAX,Sb% : O.02 MAX,Zn % : REMINDER, TOTAL IMPURITIES % : O.50 MAX (EXCLUDING Cu % ,Pb % & Zn % ) AS PER SCOPE OF SUPPLY. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE() Specification : JSS-9535-02-2008 Rev.3 R Estab
2) BRASS STRIP 0.47MM TH. X 35.6MM WIDE() Specification : JSS-9535-02-2008 REV. 3 R Estab
Category : p
Grade : 3
Size : S
407 SHAKUN INDUSTRIES
PLOT NO 44/1 GUT NO 248 GHANEGAON MIDC WALUJ MIDC WALUJ AURANGABAD Maharashtra
PIN1 : 431136
Phone No. : 2984338
GSTIN : 27AFFPM5822A1ZS 		AFFPM5822A

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) BOTTOM FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
2) TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
3) ENGAGING PLATE FOR BOXH2A[99]() Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718. E Nonestab
4) PIECE PACKING FOR BOX SM 601[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
5) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
6) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
7) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]() Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969 E Nonestab
8) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 E Nonestab
9) PIECE PACKING `A'[99]() Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820 E Nonestab
10) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 E Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 9911846499 CATCH FOR BOX H5A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
2) 9911842378 BRACKET TOP FOR BOX C 51A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
3) 9911842882 CHANNEL FOR BOX C 53A[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
4) 9911846587 SMALLER BRACKET FOR BOX SM 642 C[07]() Specification : AS PER OFBH DRG AND SPECIFICATION R Nonestab
5) 9911842185 HANDLE CLIP DRG NO OFB C 1406[99]() Specification : AS PER SPECIFICATION C Nonestab
6) 9911846500 ENGAGING PLATE FOR BOX H5A[99]() Specification : AS PER SPECIFICATION R Nonestab
7) 9911846236 CATCH WITH PLATE ASSEMBLY[99]() Specification : AS PER SPECIFICATION R Nonestab
8) 9911839007 CATCH ASSY OFBDRGNO OFB C 1195[99]() Specification : AS PER SPECIFICATION R Nonestab
9) 9911842879 BRACKET B 2 FOR BOX C 53A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
10) 911847059 SUPPORTING BRACKET BOX SM 651[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
11) 9911847060 SMALLER BRACKET FOR SM 651J[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
12) 9911844893 RACK NO 21 FOR RIFLE 5 56MM[99]() Specification : AS PER OFBH SPECIFICATION P Nonestab
13) 9911846246 SMALLER BRACKET FOR BOX SM 171[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
14) 9911847062 BIGGER PACKING PIECE SM 651J[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
15) 9911844889 RACK NO 20 FOR RIFLE 5 56MM[99]() Specification : AS PER OFBH SPECIFICATION P Nonestab
16) 9911846333 CATCH AS PER DRG NO OFB C 1942[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
17) 9911846343 HANDLE FOR CARRIER 13A[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) ANGLE SUPPORT FOR STEEL PACKAGE[07]() Specification : ANGLE SUPPORT FOR STEEL PACKAGE R Nonestab
2) LATCH ASSY FOR 120MM ARJRN AMM[07]() Specification : LATCH ASSY FOR 120MM ARJRN AMM R Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) HINGE AS PER DRG NO. OFB/C/1410[07]() Specification : Drg.No. OFB/C/1410-A E Nonestab
2) HINGE AS PER DRG. NO. OFB/C/1565[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
3) PLATE HOOK AS PER DRG. NO. OFB/C/1560[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
4) BOTTOM FOR BOX H5A[99]() Specification : As per O.F.Bhusawal Drawing/Specification C Nonestab
5) VARIOUS SHEET METAL COMPONENTS REQUIRED FOR BOX C-53A, BOX C-44A & OTHER BOXES[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
6) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER DRG./SPECIFICATION C Nonestab
7) HINGE PIN DRG. NO. OFB/C/700[07]() Specification : HINGE PIN DRG. NO. OFB/C/700 R Nonestab
8) ASSEMBLED SECURING PLATE 1545[07]() Specification : ASSEMBLES SECURING PLATE 1545 R Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) ALL BRACKETS FOR BOX -C-51A &C-52-A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
2) CATCH FOR BOX H5A[07]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
3) BIGGER BRACKET FOR BOX SM 171K[07]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
4) CATCH - AS PER DRG. NO. OFB/C/1561[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
5) CATCH FOR BOX SM 171K, 651J, 642[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
6) CATCH PLATE (WITH ASSLY) FOR BOX H2A - AS PER DRG. NO. OFB/C/717[07]() Specification : AS PER DRAWING/SPECIFICATION. C Nonestab
7) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]() Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10 REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000. E Nonestab
8) BRACKET CROSS FOR BOX C51A[07]() Specification : AS PER OFBH SPECIFICATION C Nonestab
9) BRACKET TOP FOR BOX C 51-A[07]() Specification : BRACKET TOP FOR BOX C 51-A R Nonestab
Category :
Grade : Grade III
Size : SS
408 KUMARS FORGE AND VALVES PVT LTD
GAT NO 54/6, BIRDAWADI, AMBETHAN ROAD, CHAKAN PUNE Maharashtra
PIN1 : 410501
Phone No. : 254600
GSTIN : 27AADCK0320P1ZJ 		AADCK0320P

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432100101 STEEL CUP WITH SEAL ARDE 2120 120ARJUN[64]() Specification : CQA(A)5709 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432100001 STEEL CUP WITH SEAL ARDE 2120 120 ARJUN[64]() Specification : CQA(A) 5709 C Nonestab
Category :
Grade : Grade III
Size : S
409 Tiki Tar Industries Baroda Limited
8th Floor, Neptune Tower, Productivity Road Vadodara - 390 007. Gujarat
PIN1 : 390007
Phone No. : 2337862
GSTIN : 24AADCT8382Q1ZK 		AADCT8382Q

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) BITUMEN SPECIAL AMMN.[10]() Specification : IND/ME/136 (b) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513 Description : PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513() Specification : PITCH COAL TAR SOFT-MEDIUM TYPE TO SPECN: JSS-5610-02:2014 (REV. NO. 4) DC NO. 5245-ME DT 18/06/2014 R Estab
Category : p
Grade : 3
Size : S
410 DELTA WALLACE TECHNOLOGIES PVT. LTD.
A59, SECTOR-57 NOIDA UTTAR PRADESH
PIN1 : 201301
Phone No. : 01204327405
GSTIN : 09AABCD7236K1ZF 		MRTD00461G

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) LEVEL FIRE CONTROL INSTT. AS PER DRG. MCT-2906 & MCT-2905 COMPRISING OF- 1.CAP MCT-1184/1, 2.PLATE MCT-1185/1, 3.LEVEL MCT-757/1, 4.TRIBRACH MCT-758/1, 5.SCREW MCT-1186/1, 6.ADAPTER MCT-1165/1, 7.NUT MCT-1187/1, 8.SCREW SHOULDER MCT-900/1.() As per required Specification C Not Estab.
2) MACHINING OF BOX AS PER DRG. NO.MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD.() As per required Specification C Not Estab.
3) CLICK RING TO DRG. NO.CQA(I)-793/34 FOR TELE. 84MM C/G MK-III.() As per required Specification C Not Estab.
4) MOUNTING BOLT DRG. NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III.() As per required Specification C Not Estab.
5) BEARING SLEEVE SPECIAL BOTTOM DRG. NO.CQA(I)-796/5.() As per required Specification C Not Estab.
6) BRACKET DRG. NO.CQA(I)-796/1.() As per required Specification C Not Estab.
7) BASE TO DRG. NO.MCT-2877/1 FOR MT.TELESCOPE 102A.() As per required Specification C Not Estab.
Category : P
Grade : I
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MACHINING OF BOX AS PER DRG. NO.MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD.[74]() Specification : As per required Specification C Nonestab
2) MOUNTING BOLT DRG. NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III.[74]() Specification : As per required Specification C Nonestab
3) BRACKET DRG. NO.CQA(I)-796/1.[74]() Specification : As per required Specification C Nonestab
4) MACH OF BODY TO DRG MCT 2470 1[00]() Specification : MACHINING OF BODY TO DRG.NO.MCT-2470/1 CASTING WILL BE SUPPLIED BY OFD.DUN C Nonestab
5) HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG NO ODD C 732 1[00]() Specification : HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG.NO.ODD/C/732/1 C Nonestab
6) RING WITH DIVISIONS AS PER DRG NO MCT 3268A FOR CLINOMETER 2A 46[74]() Specification : RING WITH DIVISIONS AS PER DRG.NO. MCT-3268A FOR CLINOMETER 2A(46) C Nonestab
7) PLATE RETAINING BEARING[00]() Specification : HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG.NO.ODD/C/732/1 C Nonestab
8) MACHINING OF LEVER TO DRG NO MCT 2462 CASTING[74]() Specification : MACHINING OF LEVER TO DRG.NO.MCT-2462 CASTING WILL BE SUPPLIED BY OFDUN. C Nonestab
9) MACHINING OF LEVER TO DRG NO MCT 2463[74]() Specification : MACHINING OF LEVER TO. DRG. NO. MCT-2463. CASTING WILL BE SUPPLIED BY ORD. FY.D.DUN. C Nonestab
10) MACHINING OF BEARING MOUNTED MCT 2465 1 CASTING[74]() Specification : MACHINING OF BEARING MOUNTED MCT-2465/1, CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN. C Nonestab
11) MACHINING OF SLIDE TO DRG NO OS 24466 MCT 2448 CASTING[74]() Specification : MACHINING OF SLIDE TO. DRG. NO.OS-24466 MCT-2448. CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN. C Nonestab
12) COVER BODY FOR DIRECTOR FIRE CONTROL NO7 DRG NO MCT 2460[74]() Specification : COVER,BODY FOR DIRECTOR FIRE CONTROL NO7 DRG.NO.MCT-2460. C Nonestab
13) HOUSING BEARING UNIT IRDE 68 3[74]() Specification : HOUSING BEARING UNIT,IRDE:68/3 C Nonestab
14) MACHINING OF CASTING TO DRG NO CWC 240 56 FOR HOUSING[74]() Specification : MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING C Nonestab
15) HOUSING FOR II TUBE AS PER DRG NO CWC 229 19 5 FOR PNS RIFLE LMG CGRL[74]() Specification : HOUSING FOR II TUBE AS PER DRG.NO.CWC/229/19/5 FOR PNS 5.56 RIFLE/LMG/CGRL C Nonestab
16) HOUSING EP FINISHED TO DRG NO MCT 1515 1[74]() Specification : HOUSING EP FINISHED TO DRG NO.MCT/1515/1 C Nonestab
17) KNOB ASSY[74]() Specification : KNOB ASSY(551+441)TO MCT-2316/1 COMPRNG. (1).KNOB MARKED MCT-2276/1:1/SET,(2)LOCKING SLEEVE MCT-2303/1:-1/SET,(3).CMPRN SPRING MCT-2304/1 1/SET,(4).RETAINING RING :-1/SET, (5).BALL DIA 3.00MM:-3/SET (6).RTNG KNOB MCT2308:1/SET,(7).KNOB MC C Nonestab
18) knob assembly 502[74]() Specification : knob (502+441) assembly as per drg. no. MCT-3487 C Nonestab
19) knob assembly 751[74]() Specification : knob assembly (751+441) as per MCT 3478 C Nonestab
20) KNOB ASSY TO MCT 2317 1[74]() Specification : KNOB ASSY (651+441)TO MCT-2317/1 COMPRISING 1.KNOB MARKED MCT2310/1,2.LOCKING SLEEVE MCT2303/1,3.COMPRESSION SPRING MCT2304/1 4-RETAINING KNOB MCT-2308 5.SCALE PLATE MCT-2312/1, 6.KNOB MCT-2311 C Nonestab
21) Needle Valve Carburator MCT 3215[74]() Specification : Needle Valve Carburator MCT 3215 C Nonestab
22) SOCKET AS PER DRG NO MCT 3189[74]() Specification : SOCKET AS PER DRG.NO.MCT-3189 C Nonestab
23) STOP ARMATURE TO DRG NO MCT 3126[74]() Specification : STOP,ARMATURE TO DRG.NO.MCT-3126 MCT-3126 FOR SUC-102B, C Nonestab
24) BUSHING MACHINE THREAD TO DRG MCT 3113 1 FOR SUC 102B[74]() Specification : BUSHING, MACHINE THREAD TO DRG. MCT-3113/1 FOR SUC-102B. C Nonestab
25) WASHER TO DRG MCT 3114 1 FOR SUC 102B[74]() Specification : WASHER TO DRG. MCT-3114/1 FOR SUC-102B C Nonestab
26) CELL GRATICULE TO DRG MCT 1143 1 FOR SIGHT UNIT CASED 102B[74]() Specification : CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B C Nonestab
27) PLATE BEARING TO DRG NO MCT 1118 2 FOR SIGHT UNIT CASED 102B[74]() Specification : PLATE BEARING TO DRG.NO MCT-1118/2 FOR SIGHT UNIT CASED 102B C Nonestab
28) KNOB TO DRG MCT 1150 2 FOR SIGHT UNIT CASED 102B[74]() Specification : KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B C Nonestab
29) KNOB TO DRG NO MCT 2710 FOR INDICATOR FUZE 105 37[74]() Specification : KNOB TO DRG.NO.MCT-2710 FOR INDICATOR FUZE , 105/37. C Nonestab
30) KNOB TO DRG NO MCT 3245 FOR SIGHT DIAL 104A[74]() Specification : KNOB TO DRG.NO.MCT-3245 FOR SIGHT DIAL 104A C Nonestab
31) RAIL ASSY CONSISTS OF REAR AND FRONT BRACKET TO DRG NO MCT 2313 2314 AND 2315[74]() Specification : RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG.NO.MCT-2313, 2314 & 2315 C Nonestab
32) HOUSING ASSLY MCT2288 COMPRISING OF MCT2397 1 MCT 2396 MCT 2290[74]() Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290 C Nonestab
33) BEARING DRUM TO DRG NO MCT 2901[74]() Specification : BEARING DRUM, TO DRG.NO.-MCT-2901 MCT-2901 C Nonestab
34) BRACKET AS PER DRG NO MCT 3282[74]() Specification : BRACKET AS PER DRG.NO.MCT-3282 C Nonestab
35) HOUSING EP COMPRISING OF FOLLOWINGS HOUSING EP IRDE 1274 8 AND KNOB IRDE 1274 9[74]() Specification : HOUSING EP COMPRISING OF FOLLOWINGS HOUSING EP IRDE-1274/8 AND KNOB IRDE-1274/9 C Nonestab
36) PLATE REAR SMALL AS PER DRG NO IRDE 335 22[74]() Specification : PLATE, REAR,SMALL AS PER DRG. NO.:IRDE-335/22 C Nonestab
37) CONTAINER AS PER DRG NO IRDE 335 68[74]() Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68 C Nonestab
38) BUSHING SLEEVE AS PER DRG NO IRDE 335 76[74]() Specification : BUSHING, SLEEVE, OD 22.9MM AS PER DRG.NO.: IRDE-335/76 C Nonestab
39) LEVER DRG NO CII 125[74]() Specification : LEVER DRG.NO.CII-125 C Nonestab
40) RING RETAINING TO DRG. NO. MCT-2939/2 FOR HR BINO 8X30R[74]() Specification : AS PER SPECIFICATION C Nonestab
41) RING RETANING FOR HRBINO 8 30R[74]() Specification : RING RETANING TO DRG.NO.MCT-2940/2 FOR HRBINO 8X30R. C Nonestab
42) RING RETAINING TO FOR HR BINO 8 30 R[74]() Specification : RING RETAINING TO DRG.NO.MCT-2945/2 FOR HR BINO 8X30R. C Nonestab
43) RING RETAINING TO DRG NO MCT 2946 2 FOR HR BINO 8X30 R[74]() Specification : RING RETAINING TO DRG.NO. MCT-2946/2 FOR HR BINO 8X30 R C Nonestab
44) CELL OPTICAL ELEMENT DRG NO MCT 2942 2 FOR BINOCULAR 8X30 R[74]() Specification : CELL OPTICAL ELEMENT DRG.NO.MCT-2942/2 FOR BINOCULAR 8*30 R C Nonestab
45) RING RETANING TO DRG NO MCT 2921 2 FOR HR BINO 8X30R[74]() Specification : RING RETANING TO DRG.NO.MCT-2921/2 FOR HR BINO 8X30R. C Nonestab
46) WOOD SCREW BRASS SLOTTED CSK HD NO 5X15MM IS 6760[17]() Specification : WOOD SCREW BRASS SLOTTED CSK HD.NO 5X15MM IS-6760 C Nonestab
47) DIAL CONTROL FIXED TO DRG NO MCT 3242 FOR SIGHT DIAL 104A[74]() Specification : DIAL CONTROL FIXED TO DRG.NO.MCT-3242 FOR SIGHT DIAL 104A C Nonestab
48) ADAPTER BLANK MCT 2878 FOR INDICATER FUZE 105 37 FD[74]() Specification : ADAPTER,BLANK MCT-2878.FOR INDICATER,FUZE,105/37 FD C Nonestab
49) SCREW SPECIAL ADJUSTING WITH BUSH TO DRG NO MCT 2871 1[74]() Specification : SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG.NO. MCT-2871/1.FOR DAY SIGHT TELE.5.56MM LMG(INSAS) CASED 101A , C Nonestab
50) CLAMP FINISH TO DRG NO MCT 2103[74]() Specification : CLAMP(FINISH) TO DRG NO. MCT-2103 C Nonestab
51) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD[74]() Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD C Nonestab
52) CAP TO DRG NO MCT 2433 FOR D7[74]() Specification : CAP TO DRG.NO, MCT-2433 FOR D-7 C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7.() AS PER SPECIFICATION C Not Estab.
2) CELL TO DRG.NO. , MCT-3237 FOR D-7.() AS PER SPECIFICATION C Not Estab.
3) HEAD MCT-2445.() AS PER SPECIFICATION C Not Estab.
4) MACHINING OF BRACKET TO DRG.NO. MCT-2435 TO 2438 CASTING WILL BE SUPPLIED BY ORD.FY.D.DUN.() AS PER SPECIFICATION C Not Estab.
5) TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7.() AS PER SPECIFICATION C Not Estab.
6) SCREW DRG NO.MCT-1125/1() AS PER SPECIFICATION C Not Estab.
7) FLY NUT AS PER DRG.NO CII-399/27 FOR CHEST SPARE PARTS() AS PER SPECIFICATION C Not Estab.
8) RING SECURING TO DRG. MCT-1119/1 FOR SIGHT UNIT CASED 102B() AS PER SPECIFICATION C Not Estab.
9) SHADE OPT. INST. DRG.NO.1035/61() AS PER SPECIFICATION C Not Estab.
10) BUSH FOR DIRECTOR FIRE CONTROL NO.7. DRG.NO.MCT-2446() AS PER SPECIFICATION C Not Estab.
11) HEAD MCT-2445() AS PER SPECIFICATION C Not Estab.
12) CELL TO DRG.NO. , MCT-3237 FOR D-7() AS PER SPECIFICATION C Not Estab.
13) BOLT SPECIAL MCT-1111/1 FOR SIGHT UNIT CASED 102B() AS PER SPECIFICATION C Not Estab.
14) NUT CASTELLATED HEXAGON IRDE-1175/100 FOR SIGHT DIAL 104A() AS PER SPECIFICATION C Not Estab.
15) COVER,DIAL CONTROL,FIXED AS PER DRG.NO.IRDE-1175/41() AS PER SPECIFICATION C Not Estab.
16) DIAL SCALE AS PER DRG.NO.:IRDE-335/82() AS PER SPECIFICATION C Not Estab.
17) PIN,THREADED,SPECIAL,FRONT AS PER DRG NO.IRDE-335/85() AS PER SPECIFICATION C Not Estab.
18) RING,SECURING AS PER DRG. NO. IRDE-335/75() AS PER SPECIFICATION C Not Estab.
19) BASE, PLATE AS PER DRG.NO.:IRDE-335/19() AS PER SPECIFICATION C Not Estab.
20) CELL AS PER DRG. NO.:IRDE-335/4() AS PER SPECIFICATION C Not Estab.
21) RETAINER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/6() AS PER SPECIFICATION C Not Estab.
22) BUSHINGSLEEVE,O.D.18MM AS PER DRG. NO. IRDE-335/81() AS PER SPECIFICATION C Not Estab.
23) WASHER,FLAT,OD 35MM X ID 30.5MM AS PER DRG.NO.:IRDE-335/51.() AS PER SPECIFICATION C Not Estab.
24) BODY AS PER DRG.NO. IRDE-335/1.() AS PER SPECIFICATION C Not Estab.
25) PLUNGER PICATINNY DRG.NO.CWC-236/6/1.() AS PER SPECIFICATION C Not Estab.
26) LOCK PICATINNY DRG.NO.CWC/236/9.() AS PER SPECIFICATION C Not Estab.
27) LEVER PICATINY DRG.NO.CWC/236/10() AS PER SPECIFICATION C Not Estab.
28) LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III() AS PER SPECIFICATION C Not Estab.
29) HOUSING, OBJECTIVE TO DRG NO. CQA(I)-793/44 1/SET FOR MK-III() AS PER SPECIFICATION C Not Estab.
30) ADAPTOR AS PER DRG. NO. CWC-229/41() AS PER SPECIFICATION C Not Estab.
31) ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7() AS PER SPECIFICATION C Not Estab.
32) OG.ASSY COMPRISING OF FOLLOWINGS:- (A).RING,LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER,OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.() AS PER SPECIFICATION C Not Estab.
33) SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III () AS PER SPECIFICATION C Not Estab.
34) CATCH,RANGE DRUM AS PER DRG. NO. CQA(I)-792/1() AS PER SPECIFICATION C Not Estab.
35) RING SECURING DRG.NO.CWC/229/30/2() AS PER SPECIFICATION C Not Estab.
36) ASSY. OF EYE PIECE LEFT AS PER DRG.NO. MCT-3286() AS PER SPECIFICATION C Not Estab.
37) ASSY. OF EYE PIECE RIGHT AS PER DRG.NO. MCT-3285() AS PER SPECIFICATION C Not Estab.
38) CELL OPTICAL ELEMENT DRG.NO.MCT-2943/2 FOR HR BINO() AS PER SPECIFICATION C Not Estab.
39) SCREW DRG.NO. MCT-2949/2 FOR HR BINO() AS PER SPECIFICATION C Not Estab.
40) RING RETAINING DRG.NO. MCT-2959/1() AS PER SPECIFICATION C Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Dehradun

[ENR Registration]
Name Specification Use Status
1) KNOB ASSY 551 441 TO MCT 2316 1 Description : KNOB ASSY 551 441 TO MCT 2316 1() Specification : KNOB ASSY(551+441)TO MCT-2316/1 COMPRNG. (1).KNOB MARKED MCT-2276/1:1/SET,(2)LOCKING SLEEVE MCT-2303/1:-1/SET,(3).CMPRN SPRING MCT-2304/1 1/SET,(4).RETAINING RING :-1/SET, (5).BALL DIA 3.00MM:-3/SET (6).RTNG KNOB MCT2308:1/SET,(7).KNOB MC C Estab
2) KNOB ASSY 651 441 TO MCT 2317 1 Description : KNOB ASSY 651 441 TO MCT 2317 1() Specification : KNOB ASSY (651+441)TO MCT-2317/1 COMPRISING 1.KNOB MARKED MCT2310/1,2.LOCKING SLEEVE MCT2303/1,3.COMPRESSION SPRING MCT2304/1 4-RETAINING KNOB MCT-2308 5.SCALE PLATE MCT-2312/1, 6.KNOB MCT-2311 C Estab
3) SLIDE TO DRG NO CQA I 792 34 Description : SLIDE TO DRG NO CQA I 792 34() Specification : SLIDE TO DRG NO. CQA(I)-792/34 C Estab
4) HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1, MCT-2396, MCT-2290. Description : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1, MCT-2396, MCT-2290.() Specification : As per required Specification C Estab
5) OBJECTIVE ASSY CONSISTING OF 3 COMPONENT Description : OBJECTIVE ASSY CONSISTING OF 3 COMPONENT() Specification : OBJECTIVE ASSY. CONSISTING OF 3 COMPONENT 1.) RING ADJUSTING-,MCT-2512 1/SET. 2.SCREW RING,MCT-2513/1,1/SET 3.SLEEVE OBJECTIVE DRG.ODD/M/2743/1,1/SE FOR MK-III, C Estab
6) RETICAL IN SOCKET CONSIST OF 2 COMPONENT 1 RETICAL SLEEVE MCT 2507 2 RETICAL SCREW RING MCT 2510 FOR MK III Description : RETICAL IN SOCKET CONSIST OF 2 COMPONENT 1 RETICAL SLEEVE MCT 2507 2 RETICAL SCREW RING MCT 2510 FOR MK III() Specification : RETICAL IN SOCKET CONSIST.OF 2 COMPONENT 1.RETICAL SLEEVE , MCT-2507.1/SET 2.RETICAL SCREW RING MCT-2510,1/SET FOR MK-III, C Estab
7) ADJUSTING DRUM TOCQA I 793 35 Description : ADJUSTING DRUM TOCQA I 793 35() Specification : ADJUSTING DRUM TO DRG. NO.CQA(I)-793/35 2/SET. FOR TELE SIGHT MK-III C Estab
8) ACHROMATE ASSY Description : ACHROMATE ASSY() Specification : ACHROMATE ASSY.CONSISTING OF 2 COMPONENT 1.SHADE,OBJECTIVE.DRG NO. MCT-2516 1/SET,2.SCREW RING,HOUSING,OBJECTIVE TO DRG NO. MCT-2517 1/SET FOR TELE.SIGHTING MK-III,. C Estab
9) KNOB 751 441 ASSY MCT 3478 Description : KNOB 751 441 ASSY MCT 3478() Specification : KNOB 751+441 ASSY AS PER DRG.NO.:MCT-3478 C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MACHINING OF BOX AS PER DRG. NO.MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD.[74]() Specification : As per required Specification C Nonestab
2) MOUNTING BOLT DRG. NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III.[74]() Specification : As per required Specification C Nonestab
3) MACHINING OF BASE AS PER DRG NO MCT 3471 FOR MOUNT TELE 102A[74]() Specification : MACHINING OF BASE AS PER DRG.NO. MCT-3471 FOR MOUNT TELE. 102A. NOTE:- CASTING WILL BE SUPPLIED BY OFD C Nonestab
4) MACHINING OF BEARING BOTTOM TO DRG NO MCT 2900 1 MCT 2903 MCT 2904 FOR MOUNT TELESCOPE 102A[74]() Specification : MACHINING OF BEARING BOTTOM TO DRG.NO. MCT-2900/1,MCT-2903,MCT-2904 FOR MOUNT TELESCOPE-102A. NOTE:-CASTING OF BEARING BOTTOM WILL BE PROVIDED BY OFDUN. C Nonestab
5) MACHINING OF BODY RIGHT BINO 8X30 MCT 1252 2 NOTE CASTING LF 0020000691 WILL BE SUPPLIED BY OFD[74]() Specification : MACHINING OF BODY RIGHT BINO 8X30 MCT-1252/2 NOTE- CASTING (LF:-0020000691) WILL BE SUPPLIED BY OFD C Nonestab
6) MACHINING OF BRACKET AS PER DRG NO MCT 3470 FOR MOUNT TELESCOPE 102A[74]() Specification : MACHINING OF BRACKET AS PER DRG.NO.MCT-3470 FOR MOUNT TELESCOPE 102A, NOTE: CASTING WILL BE SUPPLIED BY OFDUN. C Nonestab
7) MACHINING OF CASING UPPER[74]() Specification : MACHINING OF CASING UPPER AS PER DRG. NO.IRDE 1810/2 / MCT-2390/1 FOR COMMANDER DAY EPISCOPE. NOTE:SHATTER ALLOY CASTING AS PER DRG.NO ODD/C/826/2 WILL BE SUPPLIED BY OFD. C Nonestab
8) MACHINING OF FRAME BODY AS PER DRG MCT 2287 2 OF QUADRANT FIRE CONTROL[74]() Specification : MACHINING OF FRAME(BODY) AS PER DRG MCT 2287/2 OF QUADRANT FIRE CONTROL. NOTE: CASTINGS OF BODY WILL BE SUPPLIED BY OFD. C Nonestab
9) MACHINING OF HOLDER UPPER PRISM[74]() Specification : MACHINING OF HOLDER UPPER PRISM AS PER DRG.NO.IRDE 1808/6,/ MCT-2399 FOR DRIVES DAY SIGHT (CENTRAL) NOTE:CASTINGS AS PER ODD/C/964 WILL BE SUPPLIED BY OFD. C Nonestab
10) MACHINING OF HOUSING LOWER[74]() Specification : MACHINING OF HOUSING LOWER AS PER DRG. NO.IRDE 1809/4/MCT-2389. FOR DRIVERS DAY SIGHT (SIDE) NOTE:CASTING AS PER ODD/C/965 WILL BE SUPPLIED BY OFD. C Nonestab
11) MACHINING OF HOUSING LOWER PRISM[74]() Specification : MACHINING OF HOUSING LOWER PRISM AS PER DRG IRDE 1808/5/MCT-2391. FOR DRIVERS DAY SIGHT CENTRAL NOTE: CASTING AS PER ODD/C/963 WILL BE SUPPLIED BY OFD. C Nonestab
12) MACHINING OF HOUSING WINDOW GLASS[74]() Specification : MACHINING OF HOUSING WINDOW GLASS AS PER DRG NO.IRDE- 2051/49, MCT-2400/1 FOR GUNNERS UNITY WINDOW NOTE : CASTINGS ASPER ODD/C/930/1 WILL BE SUPPLIED BY OFD. C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MACHINING OF BOX AS PER DRG. NO.MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD.[74]() Specification : As per required Specification C Nonestab
2) CLICK RING TO DRG. NO.CQA(I)-793/34 FOR TELE. 84MM C/G MK-III.[74]() Specification : As per required Specification C Nonestab
3) MOUNTING BOLT DRG. NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III.[74]() Specification : As per required Specification C Nonestab
4) BRACKET DRG. NO.CQA(I)-796/1.[74]() Specification : As per required Specification R Nonestab
5) ADAPTER TO DRG NO MCT 2875[74]() Specification : ADAPTER TO DRG.NO. MCT-2875 C Nonestab
6) ADJUSTING DRUM TO DRG NO CQA I 793 35 FOR TELE SIGHT MK III[74]() Specification : ADJUSTING DRUM TO DRG. NO.CQA(I)-793/35 2/SET. FOR TELE SIGHT MK-III C Nonestab
7) ASSY OF SCREW SPECIAL ADJUSTING WITH BUSH TO DRG NO MCT 2650 3[74]() Specification : ASSY.OF SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG. NO.MCT-2650/3,FOR TELE.5.56 RIFLE. C Nonestab
8) BEARING AS PER DRG NO MCT 3281 FOR COLLIMETER INFINITY 102 A[74]() Specification : BEARING AS PER DRG.NO.MCT-3281 FOR COLLIMETER INFINITY 102 A C Nonestab
9) BEARING DRG NO OS 13617[74]() Specification : BEARING DRG.NO.OS-13617 C Nonestab
10) BEARING TO DRG MCT 1123 1 FOR SIGHT UNIT CASED 102B[74]() Specification : BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B C Nonestab
11) BINOCULAR SCREW DRG NO MCT 2936 2 FOR HR BINO 8X30R[74]() Specification : BINOCULAR SCREW DRG.NO. MCT-2936/2 FOR HR BINO 8X30R. C Nonestab
12) BLOCK DRG NO MCT 2485[74]() Specification : BLOCK DRG.NO.MCT-2485 C Nonestab
13) BLOCK LOCKING AS PER DRG NO MCT 3271 1 FOR SIGHT DIAL 104A[74]() Specification : BLOCK LOCKING AS PER DRG.NO. MCT-3271/1 FOR SIGHT DIAL 104A C Nonestab
14) BLOCK TO DRG NO MCT 2439 1[74]() Specification : BLOCK TO DRG.NO. MCT-2439/1 C Nonestab
15) BLOCK TO DRG NO MCT 3091 FOR MT TELESCOPE 102A[74]() Specification : BLOCK TO DRG.NO-MCT-3091 FOR MT.TELESCOPE 102A C Nonestab
16) BODY TO DRG NO MCT 3085[00]() Specification : BODY TO DRG NO,MCT-3085 C Nonestab
17) BRACKET DRG NO IRDE 2048 1 MCT 3150[74]() Specification : BRACKET DRG NO.IRDE 2048/1 MCT-3150 C Nonestab
18) BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO 2 X 10 MM LONG TO IS 6760[17]() Specification : BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO. 2 X 10 MM LONG TO IS-6760 C Nonestab
19) BUSH TO DRG OS 13616 MCT 2834[74]() Specification : BUSH TO DRG.OS-13616,MCT-2834 FOR DFC-7 WO.30032. C Nonestab
20) BUSHING BLANK MCT 1113 2[74]() Specification : BUSHING BLANK,MCT-1113/2 C Nonestab
21) CSK HD M C SCREW 2X3MM LONG 1365 BRASS FOR DISC AZIMUTH ASSY FOR GNVP[17]() Specification : C'SK HD M/C SCREW 2.0X3.0MM LONG 1365 B- RASS FOR DISC AZIMUTH ASSY. FOR G.N.V.P C Nonestab
22) CASE TO DRG NO MCT 2428 1[74]() Specification : CASE TO DRG NO. MCT-2428/1 C Nonestab
23) CASE VIAL LEVEL AS PER DRG NO MCT 3284[74]() Specification : CASE VIAL LEVEL AS PER DRG.NO.MCT-3284 C Nonestab
24) CELL OG FOR TELESCOPE SIGHTING[74]() Specification : CELL,O.G. FOR TELESCOPE SIGHTING 5.56MM RIFLE (INSAS) CASED 101A-1.DRG. NO. MCT/2830/2. C Nonestab
25) CELL AS PER DRG NO MCT 3279[74]() Specification : CELL AS PER DRG.NO.MCT-3279 C Nonestab
26) CELL OPTICAL ELEMENT AS PER DRG NO MCT 3269 1 FOR SIGHT DIAL 104A[74]() Specification : CELL OPTICAL ELEMENT AS PER DRG.NO. MCT-3269/1 FOR SIGHT DIAL 104A C Nonestab
27) CELL OPTICAL ELEMENT TO DRG NO MCT 2941 2 FOR HR BINO 8X30[74]() Specification : CELL OPTICAL ELEMENT TO DRG.NO. MCT-2941/2 FOR HR BINO 8X30 C Nonestab
28) CELL OUTER DRG NO IRDE 2048 129[74]() Specification : CELL OUTER DRG NO.IRDE-2048/129 C Nonestab
29) CH HD SCREW BM 4X10 LONG M S FOR TNPO 168B[17]() Specification : CH.HD.SCREW BM 4X10 LONG,M.S FOR TNPO-168B. C Nonestab
30) CSK HD MC SCREW M3X5 LONG BRASS FOR FOR S U C 102B[17]() Specification : CSK HD MC SCREW M3.0X5.0 LONG BRASS FOR FOR S.U.C. 102B. C Nonestab
31) DIAL SCALE TELESCOPE 102A[74]() Specification : DIAL SCALE,II TO DRG.NO. MCT-3109.FOR MT.TELESCOPE 102A C Nonestab
32) DOVETAIL COMPLETE TO DRG NO MCT 2230 3 FOR DAY SIGHT RIFLE[74]() Specification : DOVETAIL COMPLETE TO DRG NO.MCT-2230/3 FOR DAY SIGHT RIFLE 5.56MM C Nonestab
33) EYE PIECE LOCK RING TO DRG MCT 2506 1 FOR TELE SIGHT MK III[74]() Specification : EYE PIECE LOCK RING. TO DRG . MCT-2506/1. 1 PER SET FOR TELE SIGHT MK-III C Nonestab
34) EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS[74]() Specification : "EYE PIECE WITHOUT EYE PIECE -II CONSISTING OF 2 COMPONENTS:- 1.EYE PIECE SPACER RING DRG. MCT-2509,1/SET, 2. EYEPIECE SCREW RING TO DRG., MCT-2504,1/SET . FOER TELE,SIGHTING-MK-III. C Nonestab
35) HOUSING OG FINISHED TO DRG NO MCT 1514 1[74]() Specification : HOUSING OG FINISHED TO DRG NO.MCT/1514/1 C Nonestab
36) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]() Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A C Nonestab
37) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 1 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2. C Nonestab
38) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 17[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO. IRDE-2603/17. C Nonestab
39) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2605 18[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO. IRDE-2605/18. C Nonestab
40) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 32[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/32 C Nonestab
41) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 14[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/14. C Nonestab
42) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2605 43[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2605/43. C Nonestab
43) RING RETAINING TO DRG NO MCT 3238 1 FOR SIGHT DIAL 104A[74]() Specification : RING RETAINING TO DRG.NO.MCT-3238/1 FOR SIGHT DIAL 104A C Nonestab
44) RING RETAINING TO DRG NO ODD M 2742 FOR D 7[74]() Specification : RING RETAINING TO DRG.NO.ODD/M-2742 FOR D-7 C Nonestab
45) RING DRG NO MCT 2430[74]() Specification : RING DRG.NO.MCT-2430 C Nonestab
46) RING RETANING AS PER DRG NO MCT 2960 1 FOR HR BINO 8X30R[74]() Specification : RING RETANING AS PER DRG.NO. MCT-2960/1 FOR HR BINO 8X30R. C Nonestab
47) SCALE FIXED WITHOUT ENGRAVING AS PER DRG NO MCT 3266 1 FOR SIGHT UNIT CASED 102B[74]() Specification : SCALE FIXED (WITHOUT ENGRAVING) AS PER DRG.NO.MCT-3266/1 FOR SIGHT UNIT CASED 102B. C Nonestab
48) SCREW DIAL SCALE M3 X 5 MM DIN 88 FOR TELESCOPE SIGHT 84 MM RCL GUN[17]() Specification : SCREW , DIAL SCALE M3 X 5 MM DIN-88 FOR TELESCOPE SIGHT 84 MM RCL GUN. C Nonestab
49) SCREW AU 8 900 044[17]() Specification : SCREW AU.8.900.044 C Nonestab
50) SCREW BA BRASS CSK HD NO 8X02 FOR S U C[17]() Specification : SCREW BA BRASS CSK HD NO.8X02 FOR S.U.C. C Nonestab
51) SCREW BA BRASS RD HEAD NO 8 X 2MM LONG[17]() Specification : SCREW BA BRASS RD HEAD NO. 8 X 2MM LONG C Nonestab
52) SCREW CH HD C STEEL M4X20 STEEL FOR SIGHT UNIT CASED 102B[17]() Specification : SCREW CH.HD C.STEEL M4X20 STEEL 6.6 FOR SIGHT UNIT CASED 102B. C Nonestab
53) WASHER TO DRG NO IRDE 2048 87[74]() Specification : WASHER TO DRG NO.IRDE-2048/87 C Nonestab
54) WASHER TO DRG NO MCT 1315[00]() Specification : WASHER TO DRG NO. MCT-1315 C Nonestab
55) WASHER MCT 1333 1[74]() Specification : WASHER MCT-1333/1) C Nonestab
56) BRASS ROD 15 MM DIA BS 2874 1969 CZ 122 M[07]() Specification : BRASS ROD 15 MM DIA. BS:2874-1969-CZ 122 M R Nonestab
57) EYE GUARD ASSY TO DRG NO MCT 1325 1[00]() Specification : EYE GUARD ASSY TO DRG NO.MCT-1325/1 C Nonestab
58) HOUSING FOR POINTER DIAL CONTROL MCT 3132 FOR SIGHT DIAL 104A[74]() Specification : HOUSING FOR POINTER DIAL CONTROL MCT-3132 FOR SIGHT DIAL 104A C Nonestab
59) HOLDER DRG IRDE 1175 45 SHT 2 FOR SIGHT DIAL 104A[74]() Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045. C Nonestab
60) HOLDER OPTICAL ELEMENT AS PER DRG NO IRDE 335 14[74]() Specification : HOLDER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/14 C Nonestab
61) PLUNGER DRG OS 13570 MCT 2832[74]() Specification : PLUNGER TO DRG.OS-13570,MCT-2832 , FOR DFC-7,WO.29432. C Nonestab
62) PRISM HOUSING TO DRG NO MCT 1931[00]() Specification : PRISM HOUSING TO DRG NO. MCT-1931 C Nonestab
63) RING RETTIANING OPTICAL ELEMENT TO DRG IRDE 2001 7 MCT 1474 FOR BNVP 101A[74]() Specification : RING,RETTIANING,OPTICAL ELEMENT TO DRG. IRDE-2001/7,MCT-1474.FOR BNVP,101A . WO.43025. C Nonestab
64) SCREW GRUB BRASS BA FLAT END FOR SUC102B FINISH CAD PLATING[17]() Specification : SCREW GRUB BRASS BA FLAT END NO.8 X 9/32\\\" FOR SUC-102B FINISH CAD. PLATING. C Nonestab
65) SCREW GRUB SLOTTED CONICAL END STEEL M2 X4 MM LONG[17]() Specification : SCREW GRUB SLOTTED CONICAL END STEEL 6.6 M2 X4 MM LONG C Nonestab
66) SCREW CHEESE HEAD SIZE M2X4 MM STEEL WITH OIL BLACKENED AND QUENCHED COATING[17]() Specification : SCREW CHEESE HEAD SIZE- M2X4 MM STEEL WITH OIL BLACKENED AND QUENCHED COATING CONFORMING TO IS-1366 C Nonestab
67) RING SECURING AS PER DRG NO IRDE 335 75[74]() Specification : RING,SECURING AS PER DRG. NO. IRDE-335/75 C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MACHINING OF BOX AS PER DRG. NO.MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD.[74]() Specification : As per required Specification R Estab
2) CLICK RING TO DRG. NO.CQA(I)-793/34 FOR TELE. 84MM C/G MK-III.[74]() Specification : As per required Specification R Estab
3) MOUNTING BOLT DRG. NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III.[74]() Specification : As per required Specification R Estab
4) BRACKET DRG. NO.CQA(I)-796/1.[74]() Specification : As per required Specification R Estab
5) ADAPTER TO DRG NO MCT 2875[74]() Specification : ADAPTER TO DRG.NO. MCT-2875 C Estab
6) ADJUSTING DRUM TO DRG NO CQA I 793 35 FOR TELE SIGHT MK III[74]() Specification : ADJUSTING DRUM TO DRG. NO.CQA(I)-793/35 2/SET. FOR TELE SIGHT MK-III C Estab
7) ASSY OF SCREW SPECIAL ADJUSTING WITH BUSH TO DRG NO MCT 2650 3[74]() Specification : ASSY.OF SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG. NO.MCT-2650/3,FOR TELE.5.56 RIFLE. C Estab
8) BEARING AS PER DRG NO MCT 3281 FOR COLLIMETER INFINITY 102 A[74]() Specification : BEARING AS PER DRG.NO.MCT-3281 FOR COLLIMETER INFINITY 102 A C Estab
9) BEARING DRG NO OS 13617[74]() Specification : BEARING DRG.NO.OS-13617 C Estab
10) BEARING TO DRG MCT 1123 1 FOR SIGHT UNIT CASED 102B[74]() Specification : BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B C Estab
11) BINOCULAR SCREW DRG NO MCT 2936 2 FOR HR BINO 8X30R[74]() Specification : BINOCULAR SCREW DRG.NO. MCT-2936/2 FOR HR BINO 8X30R. C Estab
12) BLOCK DRG NO MCT 2485[74]() Specification : BLOCK DRG.NO.MCT-2485 C Estab
13) BLOCK LOCKING AS PER DRG NO MCT 3271 1 FOR SIGHT DIAL 104A[74]() Specification : BLOCK LOCKING AS PER DRG.NO. MCT-3271/1 FOR SIGHT DIAL 104A C Estab
14) BLOCK TO DRG NO MCT 2439 1[74]() Specification : BLOCK TO DRG.NO. MCT-2439/1 C Estab
15) BLOCK TO DRG NO MCT 3091 FOR MT TELESCOPE 102A[74]() Specification : BLOCK TO DRG.NO-MCT-3091 FOR MT.TELESCOPE 102A C Estab
16) BODY TO DRG NO MCT 3085[00]() Specification : BODY TO DRG NO,MCT-3085 C Estab
17) BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO 2 X 10 MM LONG TO IS 6760[17]() Specification : BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO. 2 X 10 MM LONG TO IS-6760 C Estab
18) BUSH TO DRG OS 13616 MCT 2834[74]() Specification : BUSH TO DRG.OS-13616,MCT-2834 FOR DFC-7 WO.30032. C Estab
19) BUSHING BLANK MCT 1113 2[74]() Specification : BUSHING BLANK,MCT-1113/2 C Estab
20) CSK HD M C SCREW 2X3MM LONG 1365 BRASS FOR DISC AZIMUTH ASSY FOR GNVP[17]() Specification : C'SK HD M/C SCREW 2.0X3.0MM LONG 1365 B- RASS FOR DISC AZIMUTH ASSY. FOR G.N.V.P C Estab
21) CASE TO DRG NO MCT 2428 1[74]() Specification : CASE TO DRG NO. MCT-2428/1 C Estab
22) CASE VIAL LEVEL AS PER DRG NO MCT 3284[74]() Specification : CASE VIAL LEVEL AS PER DRG.NO.MCT-3284 C Estab
23) CELL OG FOR TELESCOPE SIGHTING[74]() Specification : CELL,O.G. FOR TELESCOPE SIGHTING 5.56MM RIFLE (INSAS) CASED 101A-1.DRG. NO. MCT/2830/2. C Estab
24) CELL AS PER DRG NO MCT 3279[74]() Specification : CELL AS PER DRG.NO.MCT-3279 C Estab
25) CELL OPTICAL ELEMENT AS PER DRG NO MCT 3269 1 FOR SIGHT DIAL 104A[74]() Specification : CELL OPTICAL ELEMENT AS PER DRG.NO. MCT-3269/1 FOR SIGHT DIAL 104A C Estab
26) CELL OPTICAL ELEMENT TO DRG NO MCT 2941 2 FOR HR BINO 8X30[74]() Specification : CELL OPTICAL ELEMENT TO DRG.NO. MCT-2941/2 FOR HR BINO 8X30 C Estab
27) CELL OUTER DRG NO IRDE 2048 129[74]() Specification : CELL OUTER DRG NO.IRDE-2048/129 C Estab
28) CH HD SCREW BM 4X10 LONG M S FOR TNPO 168B[17]() Specification : CH.HD.SCREW BM 4X10 LONG,M.S FOR TNPO-168B. C Estab
29) CSK HD MC SCREW M3X5 LONG BRASS FOR FOR S U C 102B[17]() Specification : CSK HD MC SCREW M3.0X5.0 LONG BRASS FOR FOR S.U.C. 102B. C Estab
30) DIAL SCALE TELESCOPE 102A[74]() Specification : DIAL SCALE,II TO DRG.NO. MCT-3109.FOR MT.TELESCOPE 102A C Estab
31) DOVETAIL COMPLETE TO DRG NO MCT 2230 3 FOR DAY SIGHT RIFLE[74]() Specification : DOVETAIL COMPLETE TO DRG NO.MCT-2230/3 FOR DAY SIGHT RIFLE 5.56MM C Estab
32) EYE PIECE LOCK RING TO DRG MCT 2506 1 FOR TELE SIGHT MK III[74]() Specification : EYE PIECE LOCK RING. TO DRG . MCT-2506/1. 1 PER SET FOR TELE SIGHT MK-III C Estab
33) EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS[74]() Specification : "EYE PIECE WITHOUT EYE PIECE -II CONSISTING OF 2 COMPONENTS:- 1.EYE PIECE SPACER RING DRG. MCT-2509,1/SET, 2. EYEPIECE SCREW RING TO DRG., MCT-2504,1/SET . FOER TELE,SIGHTING-MK-III. C Estab
34) HOUSING OG FINISHED TO DRG NO MCT 1514 1[74]() Specification : HOUSING OG FINISHED TO DRG NO.MCT/1514/1 C Estab
35) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]() Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A C Estab
36) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 1 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2. C Estab
37) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 17[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO. IRDE-2603/17. C Estab
38) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2605 18[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO. IRDE-2605/18. C Estab
39) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 32[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/32 C Estab
40) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 14[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/14. C Estab
41) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2605 43[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2605/43. C Estab
42) RING RETAINING TO DRG NO MCT 3238 1 FOR SIGHT DIAL 104A[74]() Specification : RING RETAINING TO DRG.NO.MCT-3238/1 FOR SIGHT DIAL 104A C Estab
43) RING RETAINING TO DRG NO ODD M 2742 FOR D 7[74]() Specification : RING RETAINING TO DRG.NO.ODD/M-2742 FOR D-7 C Estab
44) RING DRG NO MCT 2430[74]() Specification : RING DRG.NO.MCT-2430 C Estab
45) RING RETANING AS PER DRG NO MCT 2960 1 FOR HR BINO 8X30R[74]() Specification : RING RETANING AS PER DRG.NO. MCT-2960/1 FOR HR BINO 8X30R. C Estab
46) SCALE FIXED WITHOUT ENGRAVING AS PER DRG NO MCT 3266 1 FOR SIGHT UNIT CASED 102B[74]() Specification : SCALE FIXED (WITHOUT ENGRAVING) AS PER DRG.NO.MCT-3266/1 FOR SIGHT UNIT CASED 102B. C Estab
47) SCREW DIAL SCALE M3 X 5 MM DIN 88 FOR TELESCOPE SIGHT 84 MM RCL GUN[17]() Specification : SCREW , DIAL SCALE M3 X 5 MM DIN-88 FOR TELESCOPE SIGHT 84 MM RCL GUN. C Estab
48) SCREW AU 8 900 044[17]() Specification : SCREW AU.8.900.044 C Estab
49) SCREW BA BRASS CSK HD NO 8X02 FOR S U C[17]() Specification : SCREW BA BRASS CSK HD NO.8X02 FOR S.U.C. C Estab
50) SCREW BA BRASS RD HEAD NO 8 X 2MM LONG[17]() Specification : SCREW BA BRASS RD HEAD NO. 8 X 2MM LONG C Estab
51) SCREW CH HD C STEEL M4X20 STEEL FOR SIGHT UNIT CASED 102B[17]() Specification : SCREW CH.HD C.STEEL M4X20 STEEL 6.6 FOR SIGHT UNIT CASED 102B. C Estab
52) WASHER TO DRG NO IRDE 2048 87[74]() Specification : WASHER TO DRG NO.IRDE-2048/87 C Estab
53) WASHER TO DRG NO MCT 1315[00]() Specification : WASHER TO DRG NO. MCT-1315 C Estab
54) WASHER MCT 1333 1[74]() Specification : WASHER MCT-1333/1) C Estab
55) BRASS ROD 15 MM DIA BS 2874 1969 CZ 122 M[07]() Specification : BRASS ROD 15 MM DIA. BS:2874-1969-CZ 122 M R Estab
56) EYE GUARD ASSY TO DRG NO MCT 1325 1[00]() Specification : EYE GUARD ASSY TO DRG NO.MCT-1325/1 C Estab
57) HOUSING FOR POINTER DIAL CONTROL MCT 3132 FOR SIGHT DIAL 104A[74]() Specification : HOUSING FOR POINTER DIAL CONTROL MCT-3132 FOR SIGHT DIAL 104A C Estab
58) HOLDER DRG IRDE 1175 45 SHT 2 FOR SIGHT DIAL 104A[74]() Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045. C Estab
59) HOLDER OPTICAL ELEMENT AS PER DRG NO IRDE 335 14[74]() Specification : HOLDER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/14 C Estab
60) PLUNGER DRG OS 13570 MCT 2832[74]() Specification : PLUNGER TO DRG.OS-13570,MCT-2832 , FOR DFC-7,WO.29432. C Estab
61) PRISM HOUSING TO DRG NO MCT 1931[00]() Specification : PRISM HOUSING TO DRG NO. MCT-1931 C Estab
62) RING RETTIANING OPTICAL ELEMENT TO DRG IRDE 2001 7 MCT 1474 FOR BNVP 101A[74]() Specification : RING,RETTIANING,OPTICAL ELEMENT TO DRG. IRDE-2001/7,MCT-1474.FOR BNVP,101A . WO.43025. C Estab
63) SCREW GRUB BRASS BA FLAT END FOR SUC102B FINISH CAD PLATING[17]() Specification : SCREW GRUB BRASS BA FLAT END NO.8 X 9/32\\\" FOR SUC-102B FINISH CAD. PLATING. C Estab
64) SCREW GRUB SLOTTED CONICAL END STEEL M2 X4 MM LONG[17]() Specification : SCREW GRUB SLOTTED CONICAL END STEEL 6.6 M2 X4 MM LONG C Estab
65) SCREW CHEESE HEAD SIZE M2X4 MM STEEL WITH OIL BLACKENED AND QUENCHED COATING[17]() Specification : SCREW CHEESE HEAD SIZE- M2X4 MM STEEL WITH OIL BLACKENED AND QUENCHED COATING CONFORMING TO IS-1366 C Estab
66) RING SECURING AS PER DRG NO IRDE 335 75[74]() Specification : RING,SECURING AS PER DRG. NO. IRDE-335/75 C Estab
67) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 CII 253 2[74]() Specification : R Estab
Category : P
Grade : I
Size :
411 UNITECH TEXMECH PVT. LTD.
Plot No. W-28, T Block, MIDC, Bhosari, Pune, Maharashtra
PIN1 : 411026
Phone No. : 020-27120379, 27127674, 27119213
GSTIN : 27AAACU4294K1ZX 		PNEU05248F

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN. CQA(A) 0922() CQA(A) 0922 C Not Estab.
2) BODY FOR BOMB 51 MM MORT. HE 2A TO ARDE 1933 PT. NO. ITV 17SA SPECN. CQA(A) 2322() CQA(A) 2322 C Not Estab.
3) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3A EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE() CQA (A) 2348 C Not Estab.
4) CARTG. TRAINING FOR 81 MM MORTAR BOMB 3B EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE() CQA (A) 2348 C Not Estab.
5) CENTRE PIECE DES REF NO CIA/AMN/1799 DET NO. 2 PT NO ITW 64, SPECN CQA(A) 1504() CQA(A) 1504 C Not Estab.
6) CHAMBER DESIGN REF.NO. CIA/AMMN/474/PART NO.QX 40 DC 35853 A WITH AIDE MEMORIE NO. C7/5() DRG. NO. CIA/AMMN/474 PART NO.QX 40 C Not Estab.
7) FILLING HOLE PLUG DESIGN. REF. CIA/AMN/1799 DETAIL NO. 8 PT. NO. ITW-69 SPECN CQA(A)1504() CQA(A)1504 C Not Estab.
8) FIRING BOLT TO CQA[A] SEALED DRG.NO. 04-749-130222-04.1E() DRG.NO. 04-749-130222-04.1E C Not Estab.
9) FUZE PERCN. D.A. NO.117 MK-20 EMPTY WITH CAP TO DES. REF. LS/10744/GE/341 PT. NO. QX 244 GE() IA 1204 C Not Estab.
10) FUZE PERCN. D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DES. REF. NO. CIA/AMN/273 PT.NO. IQX 35 GE() CQA(A) 0917 C Not Estab.
11) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD (L) 11855, PT NO TV 44 SPECN. CQA(A) 2351() CQA(A) 2351 C Not Estab.
12) IGNITION ELEMENT FOR PRIMER M 191 A2 CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E() DRG.NO. 04-44-79000-06105-4E C Not Estab.
13) IGNITER CASING CQA(A) SEALED DRG NO 04-749-130222-03.1E() DRG NO 04-749-130222-03.1E C Not Estab.
14) IGNITION ELEMENT (EMPTY) TO DRG.NO. CQA(A)/AMN/3229 PT. NO. IQV 30 A() DRG.NO. CQA(A)/AMN/3229 PT. NO. IQV 30 A C Not Estab.
15) PLUNGER TO CQA(A) DRG. NO. 04-44-79000-06111-4E() DRG. NO. 04-44-79000-06111-4E C Not Estab.
16) PLUNGER GUIDE DRG NO.04-44- 79000-06112-4 E() DRG NO.04-44- 79000-06112-4 E C Not Estab.
17) SCREWS SET SLOTTED HEAD FULL DOG POINT NO 2 BA TO DESIGN REFCIA/AMN/885() DESIGN REFCIA/AMN/885 C Not Estab.
18) SMOKE COMPOSITION CASING TO CQA[A] SEALED DRG NO 04-749-130222-05.1E() DRG NO 04-749-130222-05.1E C Not Estab.
19) SPACER RING TO CQA[A] SEALED DRG.NO. 04-749-130222-03.4E() DRG.NO. 04-749-130222-03.4E C Not Estab.
20) STRIKER DES REF NO CIA/AMN/1799 DET NO 3 PT NO ITW-65 DC 35817-A SPECN NO CQA(A) 1504() CQA(A) 1504 C Not Estab.
21) SWITCH NO. 4 PULL MK-1/L - EMPTY ASSEMBLY TO DRG. NO. DD(L) 15250() DRG. NO. DD(L) 15250 C Not Estab.
22) TAIL UNIT 8 A WITH CAP, DES REF CQA(A)/ AMN/2906 PART NO ITV 26 SA SPECN CQA(A) 2324() CQA(A) 2324 C Not Estab.
Category : P
Grade : III
Size : S
412 NIRMAL PRODUCTS
Unit No. 6, Unity Industrial Estate, Survey No. 69, Naikpada, Waliv, Opp. "Dwarka Industrial Estate", Vasai (East), Dist. Thane, Maharashtra
PIN1 : 401208
Phone No. : 022-40037237, 40047881
GSTIN : 27AGLPP5495P1Z9 		MUMS77446F

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804() CQA(A) 2804 C Not Estab.
2) AMMUNITION CONTAINER 69 A/L PLASTIC TO DRG. NO. ARDE 2125, PT. NO. ISV 533A SPECN. CQA(A) 2804() CQA(A) 2804 C Not Estab.
3) BASE CAP (BLACK) FOR PROJECTILE TO DRG. NO. AFK/PJ/SK-62/1() DRG. NO. AFK/PJ/SK-62/1 C Not Estab.
4) BODY (EMPTY) TO DRG, NO. NASK 855/1 (PROVISIONAL)() DRG, NO. NASK 855/1 (PROVISIONAL) C Not Estab.
5) BOX PLASTIC FOR M 191 A2 TO CQA (A) DRG. NO. 04-44-79000-6130-3() DRG. NO. 04-44-79000-6130-3 C Not Estab.
6) BOX PLASTIC DRG. NO. AFK/SK - 2224 () DRG. NO. AFK/SK - 2224 C Not Estab.
7) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942() DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942 C Not Estab.
8) CONTAINER 38 B DRG NO. CIA/AMN/2008 PART NO.ISV 464 A SPECN. NO.CQA(A) 2804() CQA(A) 2804 C Not Estab.
9) CONTAINER 38B TO DESGN. REF.NO. CIA/AMN/2008 CONSISTING OF (1) BODY (2) LID (3) RING (4) DISC() CQA(A) 2804 C Not Estab.
10) CONTAINER FOR BOOSTER CHARGE 130-02-016M TO DRG NO. NAI (V) 7002 (PROV)() DRG NO. NAI (V) 7002 (PROV) C Not Estab.
11) CONTAINER NO. R1 MK1 (IN) AS PER DRG.NO. ARDE 2025 WITH DET.NO.1() DRG.NO. ARDE 2025 WITH DET.NO.1 C Not Estab.
12) CONTAINER NO. P-17 (EMPTY ASSY) TO DRG NO ARDE 1910 DET. NO.1() DRG NO ARDE 1910 DET. NO.1 C Not Estab.
13) CONTAINER NO.P-14 TO HOLD CARTG S.E. SETS TO DRG.NO.ARDE-1824 SPECN.CQA(A) 2804() CQA(A) 2804 C Not Estab.
14) CONTAINER TO DRG NO ARDE-1933 DET NO 4, PT.NO.ITV 170 SPECN CQA (A) 2322() CQA (A) 2322 C Not Estab.
15) CONTAINER TO DRG NO. HEMRL DRG 1396 DET NO. 3 PART NO IQX 1032 WITH LID CAP() HEMRL DRG 1396 DET NO. 3 PART NO IQX 1032 C Not Estab.
16) CUP HALF TO DRG. NO. ARDE/2225 DET.NO.8() DRG. NO. ARDE/2225 DET.NO.8 C Not Estab.
17) HALF CUP TO DESIGNERS REF. NO. CIA/AMN/2158 PT. NO. ISV 1740() DRG. NO. CIA/AMN/2158 PT. NO. ISV 1740 C Not Estab.
18) NYLON RING DESIGN REF. CIA/AMN/1579 PART NO. ITV-50() DRG. NO. CIA/AMN/1579 PART NO. ITV-50 C Not Estab.
19) PLASTIC BOX FOR PACKING OF CARTGS. SA 0.22 RF BALL TO DRG. NO. AFK/SK 586-09 SHT. 1() DRG. NO. AFK/SK 586-09 SHT. 1 C Not Estab.
20) PLASTIC CONTAINER NO. P-11 TO DRG NO ARDE 1802() DRG NO ARDE 1802 C Not Estab.
21) PLASTIC DISC AS PER DRG. NO. KF/SK-1572 MATERIAL SPECN. JSS:9330-03() DRG. NO. KF/SK-1572 C Not Estab.
22) PLASTIC INDEX DISC SHOT NO.1 FOR CARTG SA 12 BORE IN YELLOW COLOUR AS PER DRG.NO.AFK/SK-2888() DRG.NO.AFK/SK-2888 C Not Estab.
23) PLASTIC INDEX DISC-SHOT NO.6 FOR CARTGS SA 12 BORE IN ORANGE COLOUR AS PER DRG.NO.AFK/SK-2888() DRG.NO.AFK/SK-2888 C Not Estab.
24) PLASTIC POWER PISTON WITHOUT POUCH FOR 65MM/ 70MM 12 BORE PAPER CARTG. AS PER DRG. NO. KF/SK-1809() DRG. NO. KF/SK-1809 C Not Estab.
25) PLASTIC POWER PISTON FOR 70MM 12 BORE PLASTIC CARTG. AS PER DRG. NO. KF/SK-1747() DRG. NO. KF/SK-1747 C Not Estab.
26) AMMUNITION CONTAINER 67 A, DRG. NO ARDE 2065 DET. 5 PART NO. ISV 521 A() DRG. NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Not Estab.
27) HALF CUP B DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 () DRG. NO CIA/AMN/851 PT.NO. ISV 862 C Not Estab.
28) PLASTIC INDEX DISC SHOT NO.9 FOR CARTGS SA 12 BORE IN PINK COLOUR AS PER DRG.NO.AFK/SK-2888() DRG.NO.AFK/SK-2888 C Non Established
Category : P
Grade : II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : P
Grade : II
Size :
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP Description : 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP() Specification : NYLON RING TO DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50 DC- 36257-A. DT.14-3-97. C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM() Specification : AFK DRG.NO. KF/SK-1809 R Estab
2) PLASTIC INDEX DISC-SHOT NO.1() Specification : DRG. NO. AFK/SK-2888 R Estab
3) HALF CUP B DRG.PT NO ISV 862,DCI-36() Specification : DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 R Estab
4) NYLON RING-DRG PT NO ITV 50() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 R Estab
5) BASE CAP (BLACK) FOR PROJECTILE() Specification : DRG. NO. AFK/PJ/SK-62/1 R Estab
6) AMMN CONTAINER 69 A/L PLASTIC ARDE() Specification : CQA(A)2804 R Estab
7) DISC LOW DENSITY POLYTHENE 3.2MM TH() Specification : KF/SK-1572 R Estab
8) PLASTIC INDEX DISC-SHOT NO.9() Specification : DRG.NO.AFK/SK-2888 DT.11.01.2007 R Estab
Category : p
Grade : 3
Size : S
413 TRAUB PRECISION TOOLS
151chandrabani khalsa Indl. Area Mohabewala Dehradun Uttarakhand
PIN1 : 248110
Phone No. : 9412910326
GSTIN : 05AGRPA2546C1ZT 		AGRPA2546C

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) LAMP WANDERING 1A AS PER DRG. NO.MCT-3212. () As per required Specification C Not Estab.
2) LEVEL FIRE CONTROL INSTT. AS PER DRG. NO.MCT-2906 & MCT-2905 COMPRISING OF – 1.CAP MCT-1184/1, 2.PLATE MCT-1185/1, 3.LEVEL MCT-757/1, 4.TRIBRACH MCT-758/1, 5.SCREW MCT-1186/1, 6.ADAPTER MCT-1165/1, 7.NUT MCT-1187/1, 8.SCREW SHOULDER MCT-900/1.() As per required Specification C Not Estab.
3) MACHINING OF BOX AS PER DRG. NO. MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD.() As per required Specification C Not Estab.
4) LAMP SOCKET ASSEMBLY 2.5V 0.3 AMP MCT-306/1 COMPRISING OF MCT- 306/1, 307, & 308 (3 SHTS)() As per required Specification C Not Estab.
5) BLOCK AS PER DRG. NO. MCT-3283 FOR COLLIMETER INFINITY 102A.() As per required Specification C Not Estab.
6) CLICK RING TO DRG. NO. CQA(I)-793/34 FOR TELE.84MM C/G MK-III.() As per required Specification C Not Estab.
7) CELL OPTICAL ELEMENT DRG.NO. MCT-2943/1 FOR HR BINO.() As per required Specification C Not Estab.
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) SCREW GRUB SLOTTED HEAD LONG STEEL WITH PHOSPHATE PLATING AS PER IS 2388 CONICAL END [74]() Specification : SCREW GRUB SLOTTED HEAD LONG STEEL WITH PHOSPHATE PLATING AS PER IS 2388 CONICAL END C Nonestab
2) LAMP GUN MOUNTED 4A MCT-3210[74]() Specification : LAMP GUN MOUNTED 4A MCT-3210 R Nonestab
3) RAIL ASSY CONSISTS OF REAR AND FRONT BRACKET TO DRG NO MCT 2313 2314 AND 2315[74]() Specification : RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG.NO.MCT-2313, 2314 & 2315 C Nonestab
4) ADAPTER TO DRG NO MCT 2875[74]() Specification : ADAPTER TO DRG.NO. MCT-2875 C Nonestab
5) 120 DEGREE CSK HEAD ALLUMINUM RIVET I S 9089[17]() Specification : 120 DEGREE CSK HEAD ALLUMINUM RIVET 1.6MM X5MM I S-9089 C Nonestab
6) BASE TO DRG NO MCT 2877 1 FOR MT TELESCOPE 102A[74]() Specification : "BASE TO DRG.NO.,MCT-2877/1 FOR MT.TELESCOPE 102A C Nonestab
7) BEARING AS PER DRG NO MCT 3281 FOR COLLIMETER INFINITY 102 A[74]() Specification : BEARING AS PER DRG.NO.MCT-3281 FOR COLLIMETER INFINITY 102 A C Nonestab
8) BEARING SLEEVE DRG NO IRDE 1175 108[74]() Specification : BEARING SLEEVE DRG NO.IRDE-1175/108 C Nonestab
9) BEARING TO DRG MCT 1123 1 FOR SIGHT UNIT CASED 102B[74]() Specification : BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B C Nonestab
10) BLOCK DRG NO MCT 2485[74]() Specification : BLOCK DRG.NO.MCT-2485 C Nonestab
11) BODY TO DRG NO MCT 3085[00]() Specification : BODY TO DRG NO,MCT-3085 C Nonestab
12) BOLT MILD STEEL HEXAGONAL HEAD FULL THREADED SIZE M5 25 LONG TO IS 1363[17]() Specification : BOLT MILD STEEL HEXAGONAL HEAD FULL THREADED SIZE M5X25 LONG. TO IS-1363 C Nonestab
13) BRACKET AS PER DRG NO MCT 3282[74]() Specification : BRACKET AS PER DRG.NO.MCT-3282 C Nonestab
14) BRACKET DRG NO CQA I 796 1[74]() Specification : BRACKET DRG.NO.CQA(I)-796/1 C Nonestab
15) BRACKET DRG NO IRDE 2048 1 MCT 3150[74]() Specification : BRACKET DRG NO.IRDE 2048/1 MCT-3150 C Nonestab
16) BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO 2 X 10 MM LONG TO IS 6760[17]() Specification : BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO. 2 X 10 MM LONG TO IS-6760 C Nonestab
17) BUSH AS PER DRG NO CWC 229 77 1[74]() Specification : BUSH AS PER DRG.NO.CWC/229/77/1. C Nonestab
18) BUSH TO DRG OS 13616 MCT 2834[74]() Specification : BUSH TO DRG.OS-13616,MCT-2834 FOR DFC-7 WO.30032. C Nonestab
19) BUTT HINGES MILD STEEL FLAP IS1341[19]() Specification : BUTT HINGES MILD STEEL. SIZE-2"LONG X 5/8"FLAP IS-1341 C Nonestab
20) C SK HD SCREW M2X3 BRASS IS1365 FOR SU 102B[17]() Specification : C.SK.HD.SCREW M2X3 BRASS IS-1365 FOR S.U 102B. C Nonestab
21) CAP BEARING HALF TO DRG NO IRDE 421 14 MCT 2903 FOR MT TELESCOPE 102A[74]() Specification : CAP,BEARING HALF,TO DRG.NO.IRDE-421/14 MCT-2903.FOR MT.TELESCOPE 102A W.O.34442. C Nonestab
22) CAP PROTECTIVE DUST AND MOISTURE SEAL AS PER DRG NO IRDE 1035 59[74]() Specification : CAP, PROTECTIVE, DUST AND MOISTURE SEAL AS PER DRG. NO-IRDE-1035/59 C Nonestab
23) CAP BODY UPPER TO DRG NO IRDE 2048 173[74]() Specification : CAP BODY UPPER TO DRG NO.IRDE-2048/173 C Nonestab
24) CAP LID TO DRG NO MCT 3251 FOR CLINOMETER 2A 46[00]() Specification : CAP(LID) TO DRG.NO.MCT-3251 FOR CLINOMETER 2A 46 C Nonestab
25) CAP OG TO DRG NO MCT 1901 1[00]() Specification : CAP OG TO DRG NO.MCT-1901/1 C Nonestab
26) CAP TO DRG MCT 433[00]() Specification : CAP TO DRG MCT 433 C Nonestab
27) CAP TO DRG NO MCT 1418[74]() Specification : CAP TO DRG NO.(MCT-1418) C Nonestab
28) CARBON STEEL FLAT HEAD RIVET 2MM X 7MM LONG IS 2155 FOR SUC 102B[17]() Specification : CARBON STEEL FLAT HEAD RIVET 2MM X 7MM LONG IS:2155 FOR SUC 102B. C Nonestab
29) CASE DRG NO OS 34611[74]() Specification : CASE DRG.NO.:OS-34611 C Nonestab
30) CASE TO DRG NO MCT 2483 3[74]() Specification : CASE TO DRG,NO. MCT-2483/3 C Nonestab
31) CASE TO DRG NO MCT 2427[74]() Specification : CASE TO DRG NO. MCT-2427 C Nonestab
32) CASE VIAL LEVEL AS PER DRG NO MCT 3284[74]() Specification : CASE VIAL LEVEL AS PER DRG.NO.MCT-3284 C Nonestab
33) CELL OG FOR TELESCOPE SIGHTING[74]() Specification : CELL,O.G. FOR TELESCOPE SIGHTING 5.56MM RIFLE (INSAS) CASED 101A-1.DRG. NO. MCT/2830/2. C Nonestab
34) CELL AS PER DRG NO MCT 3279[74]() Specification : CELL AS PER DRG.NO.MCT-3279 C Nonestab
35) CELL DRG NO MCT 1161 3 FOR SIGHT UNIT CASED 102 B[74]() Specification : CELL DRG. NO. MCT-1161/3 FOR SIGHT UNIT CASED 102B C Nonestab
36) CELL ERECTOR TO DRG NO MCT 2918 1[74]() Specification : CELL ERECTOR TO DRG.NO. MCT-2918/1 FOR D/S TELE.5.56MM RIFLE C Nonestab
37) CELL FILTER DRG NO MCT 1727 1[74]() Specification : CELL FILTER DRG.NO. MCT-1727/1 C Nonestab
38) CELL GRATICULE TO DRG MCT 1143 1 FOR SIGHT UNIT CASED 102B[74]() Specification : CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B C Nonestab
39) CELL OBJECTIVE TO DRG MCT 3233 FOR SIGHT UNIT CASED 102B[74]() Specification : CELL OBJECTIVE TO DRG.MCT-3233 FOR SIGHT UNIT CASED 102B C Nonestab
40) CELL OPTICAL ELEMENT DRG NO MCT 2943 2 FOR HR BINO[74]() Specification : CELL OPTICAL ELEMENT DRG.NO.MCT-2943/2 FOR HR BINO C Nonestab
41) CELL OPTICAL ELEMENT AS PER DRG NO MCT 2942 2 FOR BINOCULAR 8X30 R[74]() Specification : CELL OPTICAL ELEMENT AS PER DRG.NO. MCT-2942/2 8*30 R C Nonestab
42) CELL OPTICAL ELEMENT TO DRG NO MCT 2941 2 FOR HR BINO 8X30[74]() Specification : CELL OPTICAL ELEMENT TO DRG.NO. MCT-2941/2 FOR HR BINO 8X30 C Nonestab
43) CELL OPTICAL INSTRUMENTS ERECTOR AS PER DRG NO IRDE 2605 9[74]() Specification : CELL OPTICAL INSTRUMENTS (ERECTOR) AS PER DRG.NO. IRDE-2605/9. C Nonestab
44) CELL OUTER DRG NO IRDE 2048 129[74]() Specification : CELL OUTER DRG NO.IRDE-2048/129 C Nonestab
45) CELL RETICLE DRG NO IRDE 2605 16[74]() Specification : CELL RETICLE DRG.NO.:IRDE-2605/16 C Nonestab
46) CLAMP FINISH TO DRG NO MCT 2103[74]() Specification : CLAMP(FINISH) TO DRG NO. MCT-2103 C Nonestab
47) CLINOMETER 2A 46 BODY AS PER DRG NO MCT 3146 1[00]() Specification : CLINOMETER 2A 46 BODY AS PER DRG.NO.: MCT-3146/1 C Nonestab
48) COLLER TO DRG OS 12327[74]() Specification : COLLER TO DRG.NO.OS-12327,MCT-2831 FOR DFC NO-7 ,WO.19225. C Nonestab
49) CONNECTOR ROD END TO DRG MCT 3098 FOR MT TELESCOPE 102A[74]() Specification : CONNECTOR,ROD END TO DRG.-MCT-3098 .FOR MT.TELESCOPE 102A C Nonestab
50) CORNER CASE LOWER MCT 3261[74]() Specification : CORNER CASE LOWER MCT-3261 C Nonestab
51) CORNER PIECE FOR BASE PLATE TO DRG NO MCT 874 1[00]() Specification : CORNER PIECE FOR BASE PLATE TO DRG NO. MCT-874/1 C Nonestab
52) COVER BODY FOR DIRECTOR FIRE CONTROL NO7 DRG NO MCT 2460[74]() Specification : COVER,BODY FOR DIRECTOR FIRE CONTROL NO7 DRG.NO.MCT-2460. C Nonestab
53) COVER OF LEVEL TO DRG NO MCT 3252 FOR CLINOMETER 2A 46[74]() Specification : COVER OF LEVEL TO DRG.NO.MCT-3252 FOR CLINOMETER 2A 46 C Nonestab
54) DIAL SCALE TELESCOPE 102A[74]() Specification : DIAL SCALE,II TO DRG.NO. MCT-3109.FOR MT.TELESCOPE 102A C Nonestab
55) DIAL SCALE 1 TO DRG NO MCT 3093 FOR MT TELESCOPE 102A[74]() Specification : DIAL SCALE -1 TO DRG.NO.MCT-3093 FOR MT.TELESCOPE 102A C Nonestab
56) DOVETAIL COMPLETE TO DRG NO MCT 2230 3 FOR DAY SIGHT RIFLE[74]() Specification : DOVETAIL COMPLETE TO DRG NO.MCT-2230/3 FOR DAY SIGHT RIFLE 5.56MM C Nonestab
57) ELEVATION CURVE 557 TO DRG NO CQA I 792 7[74]() Specification : ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7 C Nonestab
58) ERECTING SYSTEM CONSIST OF 3 COMPONENTS[74]() Specification : ERECTING SYSTEM CONSIST.OF 3 COMPONENTS 1.SPACER RING, MCT-2501, 1/SET 2.SPACER TUBE,MCT-2502, 1/SET 3.SCREW RING,MCT-2503, 2/SET FORTEL.SIGHT MK-III, C Nonestab
59) EYE GUARD DRG NO MCT 1398[74]() Specification : EYE GUARD .DRG NO.MCT-1398 C Nonestab
60) EYE HOOK TO DRG NO OS 10608 MCT 2660[74]() Specification : EYE HOOK TO DRG NO.OS-10608 (MCT-2660) C Nonestab
61) FASTENER SET TURN LOCK DRG NO MCT 1189 1[00]() Specification : FASTENER SET,TURN LOCK DRG NO.MCT-1189/1 C Nonestab
62) FORE SIGHT TO DRG NO MCT 3106 FOR MT TELESCOPE 102A[74]() Specification : FORE SIGHT TO DRG.NO.- MCT-3106 FOR MT.TELESCOPE 102A W.O.34258. C Nonestab
63) FRAME TO DRG NO MCT 1465 3[74]() Specification : FRAME TO DRG NO. MCT-1465/3 C Nonestab
64) FRONT COVER DRG NO MCT 1301 1[00]() Specification : FRONT COVER DRG. NO. MCT-1301/1 C Nonestab
65) HOLDER DRG IRDE 1175 45 SHT 2 FOR SIGHT DIAL 104A[74]() Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045. C Nonestab
66) HOOK SAFETY NO 3 TO DRG NO MCT 695 1 7 SHEETS[17]() Specification : HOOK SAFETY NO-3 TO DRG.NO. MCT-695/1, 7 SHEETS. C Nonestab
67) HOUSING ASSLY MCT2288 COMPRISING OF MCT2397 1 MCT 2396 MCT 2290[74]() Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290 C Nonestab
68) HOUSING BEARING UNIT IRDE 68 3[74]() Specification : HOUSING BEARING UNIT,IRDE:68/3 C Nonestab
69) HOUSING ELECTRICAL DRG NO IRDE 2048 120[74]() Specification : HOUSING ELECTRICAL DRG NO.IRDE-2048/120 C Nonestab
70) HOUSING EP COMPRISING OF FOLLOWINGS HOUSING EP IRDE 1274 8 AND KNOB IRDE 1274 9[74]() Specification : HOUSING EP COMPRISING OF FOLLOWINGS HOUSING EP IRDE-1274/8 AND KNOB IRDE-1274/9 C Nonestab
71) HOUSING EP FINISHED TO DRG NO MCT 1515 1[74]() Specification : HOUSING EP FINISHED TO DRG NO.MCT/1515/1 C Nonestab
72) HOUSING FIRE CONTROL INSTRUMENT AS PER DRG NO IRDE 1809 3 FOR DRIVER DAY PERISCOPE SIDE[74]() Specification : HOUSING,FIRE CONTROL INSTRUMENT AS PER DRG.NO.IRDE-1809/3 FOR DRIVER DAY PERISCOPE(SIDE). C Nonestab
73) HOUSING FOR POINTER DIAL CONTROL MCT 3132 FOR SIGHT DIAL 104A[74]() Specification : HOUSING FOR POINTER DIAL CONTROL MCT-3132 FOR SIGHT DIAL 104A C Nonestab
74) HOUSING GEAR RIGHT DRG NO IRDE 2048 53 MCT 2106 1[74]() Specification : HOUSING GEAR(RIGHT) DRG NO.IRDE-2048/53 MCT-2106/1 C Nonestab
75) HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG NO ODD C 732 1[00]() Specification : HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG.NO.ODD/C/732/1 C Nonestab
76) INSULATING BUSH MCT 3190[74]() Specification : INSULATING BUSH MCT-3190 C Nonestab
77) INSULATOR II DRG NO MCT 1305 2[00]() Specification : INSULATOR II DRG. NO. MCT-1305/2 C Nonestab
78) KNOB ASSY[74]() Specification : KNOB ASSY(551+441)TO MCT-2316/1 COMPRNG. (1).KNOB MARKED MCT-2276/1:1/SET,(2)LOCKING SLEEVE MCT-2303/1:-1/SET,(3).CMPRN SPRING MCT-2304/1 1/SET,(4).RETAINING RING :-1/SET, (5).BALL DIA 3.00MM:-3/SET (6).RTNG KNOB MCT2308:1/SET,(7).KNOB MC C Nonestab
79) KNOB ASSY TO MCT 2317 1[74]() Specification : KNOB ASSY (651+441)TO MCT-2317/1 COMPRISING 1.KNOB MARKED MCT2310/1,2.LOCKING SLEEVE MCT2303/1,3.COMPRESSION SPRING MCT2304/1 4-RETAINING KNOB MCT-2308 5.SCALE PLATE MCT-2312/1, 6.KNOB MCT-2311 C Nonestab
80) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]() Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A C Nonestab
81) KNOB TO DRG NO MCT 2710 FOR INDICATOR FUZE 105 37[74]() Specification : KNOB TO DRG.NO.MCT-2710 FOR INDICATOR FUZE , 105/37. C Nonestab
82) KNOB TO DRG NO MCT 3245 FOR SIGHT DIAL 104A[74]() Specification : KNOB TO DRG.NO.MCT-3245 FOR SIGHT DIAL 104A C Nonestab
83) LEVER CONTROL HAND TO DRG NO MCT 3244 FOR SIGHT DIAL104A[74]() Specification : LEVER CONTROL HAND TO DRG.NO.MCT-3244 FOR SIGHT DIAL104A C Nonestab
84) LEVER DRG NO IRDE 2048 139[74]() Specification : LEVER DRG NO.IRDE-2048/139 C Nonestab
85) LEVER TO DRG NO OS 10643 MCT 2482 1[74]() Specification : LEVER TO DRG.NO.OS-10643 MCT-2482/1 C Nonestab
86) MACH OF BODY TO DRG MCT 2470 1[00]() Specification : MACHINING OF BODY TO DRG.NO.MCT-2470/1 CASTING WILL BE SUPPLIED BY OFD.DUN C Nonestab
87) MACHINING OF BASE AS PER DRG NO MCT 3471 FOR MOUNT TELE 102A[74]() Specification : MACHINING OF BASE AS PER DRG.NO. MCT-3471 FOR MOUNT TELE. 102A. NOTE:- CASTING WILL BE SUPPLIED BY OFD C Nonestab
88) MACHINING OF BEARING MOUNTED MCT 2465 1 CASTING[74]() Specification : MACHINING OF BEARING MOUNTED MCT-2465/1, CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN. C Nonestab
89) MACHINING OF BRACKET AS PER DRG NO MCT 3470 FOR MOUNT TELESCOPE 102A[74]() Specification : MACHINING OF BRACKET AS PER DRG.NO.MCT-3470 FOR MOUNT TELESCOPE 102A, NOTE: CASTING WILL BE SUPPLIED BY OFDUN. C Nonestab
90) MACHINING OF FRAME BODY AS PER DRG MCT 2287 2 OF QUADRANT FIRE CONTROL[74]() Specification : MACHINING OF FRAME(BODY) AS PER DRG MCT 2287/2 OF QUADRANT FIRE CONTROL. NOTE: CASTINGS OF BODY WILL BE SUPPLIED BY OFD. C Nonestab
91) MACHINING OF HOUSING WINDOW GLASS[74]() Specification : MACHINING OF HOUSING WINDOW GLASS AS PER DRG NO.IRDE- 2051/49, MCT-2400/1 FOR GUNNERS UNITY WINDOW NOTE : CASTINGS ASPER ODD/C/930/1 WILL BE SUPPLIED BY OFD. C Nonestab
92) MACHINING OF LEVER TO DRG NO MCT 2462 CASTING[74]() Specification : MACHINING OF LEVER TO DRG.NO.MCT-2462 CASTING WILL BE SUPPLIED BY OFDUN. C Nonestab
93) MACHINING OF LEVER TO DRG NO MCT 2463[74]() Specification : MACHINING OF LEVER TO. DRG. NO. MCT-2463. CASTING WILL BE SUPPLIED BY ORD. FY.D.DUN. C Nonestab
94) MACHINING OF SLIDE TO DRG NO OS 24466 MCT 2448 CASTING[74]() Specification : MACHINING OF SLIDE TO. DRG. NO.OS-24466 MCT-2448. CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN. C Nonestab
95) MEDIUM WEIGHT STEEL BUTT HINGE UNCRANCKED 40 MM LONG WITHOUT HOLE IS 1341[17]() Specification : MEDIUM WEIGHT STEEL BUTT HINGE UNCRANCKED 40 MM LONG WITHOUT HOLE IS-1341. C Nonestab
96) MILD STEEL HINGE 2[17]() Specification : MILD STEEL HINGE 2" C Nonestab
97) MOUNTING BOLT DRG NO CQA I 792 35 FOR TELESCOPIC SIGHT MK III[74]() Specification : MOUNTING BOLT DRG.NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III C Nonestab
98) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 1 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2. C Nonestab
99) NUT CLAMPING AS PER DRG NO MCT 3163[74]() Specification : NUT CLAMPING AS PER DRG.NO.MCT-3163 C Nonestab
100) NUT LOCKING SPECIAL DRG NO MCT 3112 FOR SIGHT DIAL 104A[74]() Specification : NUT,LOCKING,SPECIAL,DRG.NO. MCT-3112.FOR SIGHT DIAL 104A. C Nonestab
101) NUT PLAIN ROUND AS PER DRG NO MCT 3012[74]() Specification : NUT,PLAIN ROUND AS PER DRG.NO. MCT-3012. C Nonestab
102) NUT TO DRG NO MCT 2487[74]() Specification : NUT TO DRG.NO MCT-2487 C Nonestab
103) OPPOSED BEARING TO DRG NO CQA I 793 32 FOR TELE SIGHT MK III[74]() Specification : OPPOSED BEARING TO DRG.NO.CQA(I)-793/32. 2/SET FOR TELE. SIGHT MK-III C Nonestab
104) PIN FOR S DIAL M S[00]() Specification : PIN 1.5M 6X5MMFOR S/DIAL M.S. C Nonestab
105) PIN STEEL FOR S U CASE 102B[00]() Specification : PIN 2.0 MM X2.5 STEEL FOR S.U.CASE 102B. C Nonestab
106) PIN COTTER SPLIT FOR SIGHT DIAL STEEL[17]() Specification : PIN COTTER SPLIT 0.8X10MM FOR SIGHT DIAL STEEL C Nonestab
107) PIN CYLINDRICAL STEEL 2 H 8X6MM LONG FOR S DIAL 104A[17]() Specification : PIN CYLINDRICAL STEEL 2 H 8X6MM LONG FOR S/DIAL 104A. C Nonestab
108) PIN RANGE DRUM FRP 2X18 SMS 1663 MCT 1062[00]() Specification : PIN RANGE DRUM FRP-2X18 SMS 1663 MCT-1062 C Nonestab
109) PIN STEEL FOR S U C[00]() Specification : PIN STEEL 2.9X20.00 FOR S.U.C. C Nonestab
110) PIN TAPER MS FOR SUC IRDE 1132[00]() Specification : PIN TAPER MS.1.5X8 MM FOR SUC IRDE-1132. C Nonestab
111) PIVOT TO DRG NO MCT 1100 2[00]() Specification : PIVOT TO DRG NO. MCT-1100/2 C Nonestab
112) PLATE[26]() Specification : PLATE AS PER DRG.NO. MCT-1620/2 FOR TNPO-168B. C Nonestab
113) PLATE 038[26]() Specification : PLATE (038) FOR TNPO-160 DRG.NO.-AU,6.439.038 CB (UNTOUGHENED GLASS PLATES TO BE ISSUED BY OFD) C Nonestab
114) PLATE REAR SMALL AS PER DRG NO IRDE 335 22[74]() Specification : PLATE, REAR,SMALL AS PER DRG. NO.:IRDE-335/22 C Nonestab
115) PLATE BEARING TO DRG NO MCT 1118 2 FOR SIGHT UNIT CASED 102B[74]() Specification : PLATE BEARING TO DRG.NO MCT-1118/2 FOR SIGHT UNIT CASED 102B C Nonestab
116) PLATE COVER TO DRG NO MCT 1400[74]() Specification : PLATE COVER TO DRG.NO MCT-1400 C Nonestab
117) PLATE DRG[26]() Specification : PLATE DRG.NO.AU6.439.038-01 CB FOR TNPO-160 C Nonestab
118) PLATE FOR TNPO 168B DRG NO AU8 640 066 UNTOUGHENED GLASS PLATES TO BE ISSUED BY OFD[26]() Specification : PLATE FOR TNPO-168B DRG.NO.AU8.640.066 (UNTOUGHENED GLASS PLATES TO BE ISSUED BY OFD) C Nonestab
119) PLATE INDEXING FIXTURE TO DRG NO MCT 2477[74]() Specification : PLATE INDEXING FIXTURE TO DRG.NO. MCT-2477 C Nonestab
120) PLATE RETAINING BEARING[00]() Specification : HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG.NO.ODD/C/732/1 C Nonestab
121) PLUNGER DRG OS 13570 MCT 2832[74]() Specification : PLUNGER TO DRG.OS-13570,MCT-2832 , FOR DFC-7,WO.29432. C Nonestab
122) PT SCREW 1412 FOR HR BINO[17]() Specification : PT.SCREW (KA 22X14 WN 1412) FOR H.R.BINO C Nonestab
123) PT SCREW 1452 FOR H R BINO[17]() Specification : PT.SCREW (K18X10WN 1452) FOR H.R.BINO C Nonestab
124) RING EXTERNALLY THREADED AS PER DRG NO IRDE 2605 28[74]() Specification : RING,EXTERNALLY THREADED AS PER DRG.NO.IRDE-2605/28. C Nonestab
125) RING EYE PIECE IRDE 1274 10 DRG NO MCT 1297 1[00]() Specification : RING EYE PIECE ( IRDE-1274/10 ) DRG. NO. MCT-1297/1 C Nonestab
126) RING FOR DIRECTOR FIRE CONTROL NO 7 DRG NO OS 13622 MCT 2440[74]() Specification : RING FOR DIRECTOR FIRE CONTROL NO.7. DRG.NO.OS-13622,MCT-2440.WO.29374. C Nonestab
127) RING RETAINING DRG NO MCT 2959 1[74]() Specification : RING RETAINING DRG.NO. MCT-2959/1 C Nonestab
128) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2605 43[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2605/43. C Nonestab
129) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 17[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO. IRDE-2603/17. C Nonestab
130) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 32[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/32 C Nonestab
131) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 14[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/14. C Nonestab
132) RING RETAINING TO DRG NO MCT 2946 2 FOR HR BINO 8X30 R[74]() Specification : RING RETAINING TO DRG.NO. MCT-2946/2 FOR HR BINO 8X30 R C Nonestab
133) RING RETAINING TO DRG NO MCT 3238 1 FOR SIGHT DIAL 104A[74]() Specification : RING RETAINING TO DRG.NO.MCT-3238/1 FOR SIGHT DIAL 104A C Nonestab
134) RING RETAINING TO DRG NO ODD M 2742 FOR D 7[74]() Specification : RING RETAINING TO DRG.NO.ODD/M-2742 FOR D-7 C Nonestab
135) RING RETAINING TO DRG. NO. MCT-2939/2 FOR HR BINO 8X30R[74]() Specification : AS PER SPECIFICATION C Nonestab
136) RING RETAINING TO FOR HR BINO 8 30 R[74]() Specification : RING RETAINING TO DRG.NO.MCT-2945/2 FOR HR BINO 8X30R. C Nonestab
137) RING RETANING AS PER DRG NO MCT 2960 1 FOR HR BINO 8X30R[74]() Specification : RING RETANING AS PER DRG.NO. MCT-2960/1 FOR HR BINO 8X30R. C Nonestab
138) RING RETTIANING OPTICAL ELEMENT TO DRG IRDE 2001 7 MCT 1474 FOR BNVP 101A[74]() Specification : RING,RETTIANING,OPTICAL ELEMENT TO DRG. IRDE-2001/7,MCT-1474.FOR BNVP,101A . WO.43025. C Nonestab
139) RING SEPARATING TO DRG TDE I 161 9 MCT 1139[74]() Specification : RING SEPARATING TO DRG.TDE(I)161/9 MCT-1139.FOR SUC-102B.WO.23461. C Nonestab
140) RING SPECIAL AS PER DRG NO IRDE 2605 13[74]() Specification : RING SPECIAL AS PER DRG.NO. IRDE-2605/13 C Nonestab
141) RING TO DRG NO MCT 1992 FOR GNVP[74]() Specification : RING TO DRG.NO.MCT-1992 FOR GNVP C Nonestab
142) RING WITH DIVISIONS AS PER DRG NO MCT 3268A FOR CLINOMETER 2A 46[74]() Specification : RING WITH DIVISIONS AS PER DRG.NO. MCT-3268A FOR CLINOMETER 2A(46) C Nonestab
143) RING WITHOUT ENGRAVING AS PER DRG NO MCT 3268[74]() Specification : RING WITHOUT ENGRAVING AS PER DRG.NO.MCT-3268 C Nonestab
144) RIVET COPPER CSK HD 2MM X 6MM FOR SIGHT DIAL 104A[17]() Specification : RIVET COPPER CSK.HD.2MM X 6MM FOR SIGHT DIAL 104A. C Nonestab
145) RIVET COPPER CSK HD LONG FOR PLOTTER 81MM MORTAR CASED 101A[17]() Specification : RIVET COPPER CSK HD. 1.6X3.5MM LONG FOR PLOTTER 81MM MORTAR CASED 101A. C Nonestab
146) RIVET COPPER CSK HD LONG FOR S DIAL 104A[17]() Specification : RIVET COPPER CSK.HD. 1.6 X 6 MM LONG FOR S/DIAL 104A. C Nonestab
147) RIVET COPPER FLAT HEAD DIA 5MM LONG PT NO 1290 00023[17]() Specification : RIVET COPPER FLAT HEAD 1.6 MM DIA X5MM LONG PT. NO.1290-00023. C Nonestab
148) RIVET FLAT HD STEEL 3X7MM IS 2155[17]() Specification : RIVET FLAT HD. STEEL 3X7MM IS-2155 C Nonestab
149) RIVET SNAP HD IS 2155 STEEL[17]() Specification : RIVET SNAP HD.1.6X7MM LONG IS-2155 [STEEL] C Nonestab
150) RIVET SOLID SNAP HD 2X7MM BRASS IS 2907[17]() Specification : RIVET SOLID SNAP HD.2X7MM BRASS IS-2907 C Nonestab
151) RIVETS BRASS FT HD 2X5MM LONG[17]() Specification : RIVETS BRASS FT.HD.2X5MM LONG C Nonestab
152) ROUND HEAD WOOD SCREW NO 4X12 STEEL PHOSPHATE IS 6739[17]() Specification : ROUND HEAD WOOD SCREW NO. 4X12 STEEL PHOSPHATE. IS-6739 C Nonestab
153) SCALE FIXED WITHOUT ENGRAVING AS PER DRG NO MCT 3266 1 FOR SIGHT UNIT CASED 102B[74]() Specification : SCALE FIXED (WITHOUT ENGRAVING) AS PER DRG.NO.MCT-3266/1 FOR SIGHT UNIT CASED 102B. C Nonestab
154) SCREW DRIVER 150MM LONG INCLUDING HANDLE CONFORMING TO IS 844 1991[40]() Specification : SCREW DRIVER 150MM LONG INCLUDING HANDLE 4.5MM ROD DIA X 75MM ROD LENGTH OUT SIDE OF THE HANDLE TIP SIZE 5MM CONFORMING TO IS-844/1991 MAKE-GEDORE/TAPARIA/SEMATO NOTE:-SAMPLE IS REQUIRED ALONG WITH QUOTATION. C Nonestab
155) SCREW GRUB C M BRASS IS 2388[17]() Specification : SCREW GRUB 'C' M1.6X4 LONG BRASS IS-2388 C Nonestab
156) SCREW GRUB BRASS BA FLAT END FOR SUC102B FINISH CAD PLATING[17]() Specification : SCREW GRUB BRASS BA FLAT END NO.8 X 9/32\\\" FOR SUC-102B FINISH CAD. PLATING. C Nonestab
157) SCREW GRUB BRASS CONICAL END FOR SUC 102B FINISH BLACK BRONZING[17]() Specification : SCREW GRUB BRASS CONICAL END M2.5X2 MM LONG FOR SUC-102B FINISH BLACK BRONZING. C Nonestab
158) SCREW GRUB C BRASS CONICAL WITH BLACK BRONZING PLATING AS PER IS 2388[17]() Specification : SCREW GRUB "C" BRASS CONICAL WITH BLACK BRONZING PLATING SIZE-M1.6 X 2.0 MM LONG AS PER IS-2388 C Nonestab
159) SCREW GRUB C BRASS M2X3 LG IS 2388 FOR BINO 20X70[17]() Specification : SCREW GRUB'C' BRASS M2X3 LG IS-2388 FOR BINO 20X70 C Nonestab
160) SCREW GRUB C LONG BRASS IS 2388[17]() Specification : SCREW GRUB'C'M2.5X8 LONG BRASS IS-2388 C Nonestab
161) SCREW GRUB CONICAL END SIZE M2X2 STEEL CONFORMING TO IS 2388[17]() Specification : SCREW GRUB CONICAL END SIZE-M2X2 STEEL CONFORMING TO IS-2388 6.6 C Nonestab
162) SCREW GRUB CONICAL END SIZE M4X6 STEEL CONFORMING TO IS 2388[17]() Specification : SCREW GRUB CONICAL END SIZE-M4X6 STEEL CONFORMING TO IS-2388 C Nonestab
163) SCREW GRUB CONICAL END STEEL AS PER IS 2388 1971[17]() Specification : SCREW GRUB,CONICAL END,STEEL 6.6, M1.6X4 MM LONG AS PER IS:2388-1971. C Nonestab
164) SCREW GRUB SLOTTED CONICAL END STEEL SIZE M3X3 MM LONG AS PER IS 2388 1971[17]() Specification : SCREW GRUB SLOTTED CONICAL END STEEL SIZE M3X3 MM LONG AS PER IS:2388-1971 (6.6) C Nonestab
165) SCREW GRUB SLOTTED CONICAL END STEEL WITH CADMIUM PLATING IS 2388 MAKE LPS[17]() Specification : SCREW GRUB SLOTTED CONICAL END M2X2.5 LONG STEEL WITH CADMIUM PLATING IS-2388 MAKE-LPS C Nonestab
166) SCREW GRUB SLOTTED CONICAL END STEEL WITH CADMIUM PLATING SIZE M2X2 DIN 553 AS PER IS 2388[17]() Specification : SCREW GRUB SLOTTED CONICAL END STEEL WITH CADMIUM PLATING SIZE M2X2,(DIN-553) AS PER IS-2388. C Nonestab
167) SCREW GRUB SLOTTED CONICAL POINT[74]() Specification : SCREW GRUB SLOTTED CONICAL POINT, M2.2 X 2.5, STEEL 6.6 C Nonestab
168) SCREW GRUB SLOTTED CONICAL POINT STEEL FOR AZIMOTH ELEVATION ASSY[17]() Specification : SCREW GRUB SLOTTED CONICAL POINT M2.2 X 4MM LONG, STEEL 6.6, FOR AZIMOTH & ELEVATION ASSY. C Nonestab
169) SCREW GRUB SLOTTED CONICAL SIZE M2X2 BRASS CONFIRMING TO IS 2388 MAKE TVS UNBRAKO LPS[17]() Specification : SCREW GRUB SLOTTED CONICAL SIZE-M2X2 BRASS CONFIRMING TO IS-2388 MAKE-TVS/UNBRAKO/LPS C Nonestab
170) SCREW GRUB SLOTTED CONICAL SIZE M2X4 MM LONG BRASS WITH BLACK BRONZING COATING AS PER IS 2388[17]() Specification : SCREW GRUB SLOTTED CONICAL SIZE-M2X4 MM LONG BRASS WITH BLACK BRONZING COATING AS PER IS-2388 C Nonestab
171) SCREW GRUB SLOTTED END M2X2 LONG BRASS GRUB C I S 2388[17]() Specification : SCREW GRUB SLOTTED END M2X2 LONG BRASS GRUB 'C' I S -2388 C Nonestab
172) SCREW GRUB SLOTTED HEAD CONICAL HEAD WITH CADMIUM PLATING STEEL AS PER IS 2388 MAKELPS[17]() Specification : SCREW GRUB SLOTTED HEAD CONICAL HEAD WITH CADMIUM PLATING,STEEL SIZE-M1.6X2 AS PER IS-2388, 6.6 MAKE-LPS C Nonestab
173) SCREW GRUB SLOTTED M2X3MM LONG BRASS WITH BLACK BRONZING PLATED IS 2388 CONICAL END[17]() Specification : SCREW GRUB SLOTTED M2X3MM LONG BRASS WITH BLACK BRONZING PLATED.IS-2388 CONICAL END. C Nonestab
174) SCREW HEX SOCKET HEAD CAP CONFORMING TO IS 2269 MAKE UNBRAKO TVS LPS[17]() Specification : SCREW HEX.SOCKET HEAD CAP M 3X6.5 CONFORMING TO IS-2269 MAKE-UNBRAKO/TVS/LPS C Nonestab
175) SCREW HEXAGONAL HEAD SIZE M6X15 LONG STEEL IS 1364[17]() Specification : SCREW HEXAGONAL HEAD SIZE-M6X15 LONG STEEL IS-1364 P-8.8 C Nonestab
176) SCREW LONG HOUSING AS PER DRG NO CQA I 792 31 FOR TELE SIGHT MK III[74]() Specification : SCREW LONG HOUSING AS PER DRG.NO.CQA(I)-792/31 FOR TELE.SIGHT MK-III C Nonestab
177) SCREW LONG HOUSING GF125181 FOR BRACKET FOR TELESCOPE 84MM RCL GUN DRG NO CQA I 792 31[17]() Specification : SCREW LONG HOUSING(GF-125181)FOR BRACKET TO MAT.SPEC.BS 970/EN.32H & ZINK PHOSPHATING FOR TELESCOPE 84MM RCL GUN. L/OUT-P-125/2 DRG. NO.-CQA(I)-792/31 C Nonestab
178) SCREW M C SL CSK HD M3X6 A BRASS LONG IS 5308[17]() Specification : SCREW M/C SL.CSK HD M3X6 A BRASS LONG IS:5308 C Nonestab
179) SCREW M C SLOTTED CSK HD STEEL IS 1365 M3X20MM LONG FOR INDICATOR FUSE 105 37 FINISH PHOSPHATING[17]() Specification : SCREW M/C SLOTTED CSK HD. STEEL 4.6 ,IS-1365 M3X20MM LONG FOR INDICATOR FUSE 105/37 FINISH: PHOSPHATING. C Nonestab
180) SCREW M2X4 SLOTTED HEAD CONICAL END GRUB SCREW STEEL AS PER IS 2388 WITH CADMIUM PLATING[17]() Specification : SCREW M2X4 SLOTTED HEAD CONICAL END GRUB SCREW STEEL AS PER IS-2388 WITH CADMIUM PLATING C Nonestab
181) SCREW MACH CH HD M3X6MM LONG IRDE 68 MA FOR SIGHT UNIT CASED[17]() Specification : SCREW MACH.CH.HD.M3X6MM LONG IRDE-68/MA FOR SIGHT UNIT CASED.D.C(I)NO-0120-I (P) C Nonestab
182) SCREW MACHINE CHEES HEAD SIZE M6X12 STEEL TO IS 1366[17]() Specification : SCREW MACHINE CHEES HEAD SIZE-M6X12 STEEL TO IS-1366 C Nonestab
183) SCREW MACHINE CSK HEAD SIZE M4X6 LONG BRASS CONFIRMING TO IS 1365[17]() Specification : SCREW MACHINE C'SK HEAD SIZE- M4X6 LONG BRASS CONFIRMING TO IS-1365 C Nonestab
184) SCREW MACHINE CSK HEAD SIZE M4X18 LONG BRASS CONFIMING TO IS 1365[17]() Specification : SCREW MACHINE CSK HEAD SIZE-M4X18 LONG BRASS CONFIMING TO IS-1365 C Nonestab
185) SCREW MACHINE CSK HEAD SIZE M4X5 LONG BRASS CONFIRMING TO IS 1365[17]() Specification : SCREW MACHINE C'SK HEAD SIZE-M4X5 LONG BRASS CONFIRMING TO IS-1365 C Nonestab
186) SCREW MACHINE CSK HEAD SIZE M6 X 15 LONG STEEL 5S IS 1365[17]() Specification : SCREW MACHINE CSK HEAD SIZE-M6 X 15 LONG STEEL(5S) IS-1365 C Nonestab
187) SCREW MACHINE CSK HEAD SIZE M6X9 LONG STEEL CONFIRMING TO IS 1365[17]() Specification : SCREW MACHINE C'SK HEAD SIZE-M6X9 LONG STEEL CONFIRMING TO IS-1365 C Nonestab
188) SCREW MET SLOTT CSK HD COARSE PITCH PRECISION STEEL IS 1365[17]() Specification : SCREW MET.SLOTT.CSK HD.,COARSE PITCH, PRECISION, M2.5X6 ,STEEL, IS-1365 C Nonestab
189) SCREW METRIC HEX HD STEEL M6 30 HALF THREAD LENGTH[17]() Specification : SCREW METRIC,HEX.HD,STEEL M6X30 HALF THREAD LENGTH. C Nonestab
190) SCREW METRIC CH HEAD STEEL M3X20MM LONG IS 1366[17]() Specification : SCREW METRIC CH.HEAD STEEL M3X20MM LONG IS-1366 C Nonestab
191) SCREW METRIC SLOTTED C S K HEAD COARSE PITCH M 2X6 LONG BRASS CONFORMING TO IS 1365[17]() Specification : SCREW METRIC SLOTTED C S K HEAD COARSE PITCH M 2X6 LONG BRASS. CONFORMING TO IS-1365 C Nonestab
192) SCREW METRIC SLOTTED CH HD M6X19 LONG STEEL IS 1366[17]() Specification : SCREW METRIC SLOTTED CH. HD.M6X19 LONG STEEL IS-1366 C Nonestab
193) SCREW METRIC SLOTTED CH HD WITH BLACK BRONZING IS 1366 BRASS[17]() Specification : SCREW METRIC SLOTTED CH. HD.M2.5X8 LONG WITH BLACK BRONZING IS 1366 BRASS C Nonestab
194) SCREW METRIC SLOTTED CH HEAD M2X6 BRASS IS 1366[17]() Specification : SCREW METRIC SLOTTED CH. HEADM2X6 BRASS IS-1366 C Nonestab
195) SCREW METRIC SLOTTED CSK COARSE PITCH PRECISION IS1365 STEEL FOR SIGHT DIAL 104A GOGGLES PASSIVE NIGHT VISION[17]() Specification : SCREW METRIC SLOTTED CSK M2.5X6 MM LONG COARSE PITCH,PRECISION, IS:1365, STEEL FOR SIGHT DIAL 104A/GOGGLES PASSIVE NIGHT VISION. C Nonestab
196) SCREW METRIC SLOTTED CSK HD IS 1365 BRASS[17]() Specification : SCREW METRIC SLOTTED CSK HD M1.6X6 IS:1365 BRASS C Nonestab
197) SCREW METRIC SLOTTED CSK HD COARSE PITCH PRECISION IS 1365 BRASS FOR PASSIVE NIGHT VISION GOGGLES[17]() Specification : SCREW METRIC SLOTTED C'SK.HD COARSE PITCH PRECISION M 1.6 X 6 LONG IS:1365 BRASS FOR PASSIVE NIGHT VISION GOGGLES C Nonestab
198) SCREW METRIC SLOTTED CSK HD COARSE PITCH PRECISION M2X3 STEEL IS 1365 1968 MAKE TVS UNBRAKO LPS[17]() Specification : SCREW METRIC SLOTTED CSK HD COARSE PITCH PRECISION M2X3 STEEL IS-1365/1968 MAKE-TVS/UNBRAKO/LPS C Nonestab
199) SCREW METRIC STOLLED CH HD COARSE PITCH PRECISION M2X5 IS 1366 BRASS[17]() Specification : SCREW METRIC STOLLED CH. HD. COARSE PITCH PRECISION M2X5 , IS-1366, BRASS C Nonestab
200) SCREW MOUNTING BOLT AS PER DRG NO MCT 1059 FOR TELE SIGHT MK III[74]() Specification : SCREW MOUNTING BOLT AS PER DRG.NO. MCT-1059 FOR TELE.SIGHT MK-III C Nonestab
201) SCREW SHORT HOUSING AS PER DRG NO CQA I 792 37 FOR TELE SIGHT MK III[74]() Specification : SCREW SHORT HOUSING AS PER DRG.NO.CQA(I)-792/37 FOR TELE.SIGHT MK-III C Nonestab
202) SCREW SLIDE AS PER DRG NO CQA I 792 27 FOR TELE SIGHT MK III[74]() Specification : SCREW ,(SLIDE) AS PER DRG.NO. CQA(I)-792/27 FOR TELE.SIGHT MK-III C Nonestab
203) SCREW SLOTTED CH HD M4X13MM LONG STEEL IS1366 WITH PHOSPHATE PLATING[17]() Specification : SCREW SLOTTED CH.HD. M4X13MM LONG STEEL IS-1366 WITH PHOSPHATE PLATING C Nonestab
204) SCREW SLOTTED CH HD STEEL[17]() Specification : SCREW SLOTTED CH HD STEEL 6.6 M3.5X7 LONG C Nonestab
205) SCREW SLOTTED CSK HD PRECISION M2X5MM LONG BRASS WITH DULL BRASS BRONZING PLATING AS PER IS 1365[17]() Specification : SCREW SLOTTED CSK HD.(PRECISION) M2X5MM LONG BRASS WITH DULL BRASS BRONZING PLATING AS PER IS-1365. C Nonestab
206) SCREW SLOTTED CSK HEAD BRASS WITH DULL BRASS BRONZING PLATING AS PER IS 1365[17]() Specification : SCREW SLOTTED CSK HEAD M 2.5X8MM LONG BRASS WITH DULL BBRASS BRONZING PLATING AS PER IS-1365. C Nonestab
207) SCREW SLOTTED CSK HEAD M2X8 MM LONG COARSE PRECISION STEEL WITH PHOSPHATING PLATING AS PER IS 1365[17]() Specification : SCREW SLOTTED CSK HEAD M2X8 MM LONG COARSE PRECISION) STEEL WITH PHOSPHATING PLATING AS PER IS-1365. C Nonestab
208) SCREW SLOTTEDMETRIC CSK HD M2X7 LONG BRASS IS 1365 2005[17]() Specification : SCREW SLOTTED METRIC CSK HD M2X7 LONG BRASS IS:1365-2005. C Nonestab
209) SCREW SOCKET CAP HEXAGONAL HEAD STEEL M4X12 LONG CONFORMING TO IS 2269 MAKE UNBRAKO LPS TVS[17]() Specification : SCREW SOCKET CAP HEXAGONAL HEAD. STEEL M4X12 LONG CONFORMING TO IS-2269 MAKE-UNBRAKO/LPS/TVS. C Nonestab
210) SCREW SOCKET CAP HEXAGONAL HEAD SIZE M4 X 16MM LONG STEEL IS 2269[17]() Specification : SCREW SOCKET CAP HEXAGONAL HEAD SIZE-M4 X 16MM LONG STEEL IS-2269 P8.8 P -PRECISION GRADE 8.8 =NO MARKING OF HEAD (PLAIN HD.) C Nonestab
211) SCREW SOCKET CAP HEXAGONAL HEAD SIZE M4X18 LONG STEEL CONFIRMING TO IS 2269[17]() Specification : SCREW SOCKET CAP HEXAGONAL HEAD SIZE-M4X18 LONG STEEL CONFIRMING TO IS-2269 P-8.8 C Nonestab
212) SCREW SPECIAL ADJUSTING WITH BUSH TO DRG NO MCT 2871 1[74]() Specification : SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG.NO. MCT-2871/1.FOR DAY SIGHT TELE.5.56MM LMG(INSAS) CASED 101A , C Nonestab
213) SCREW SPECIAL DRG NO 2880[00]() Specification : SCREW SPECIAL DRG.NO.2880 C Nonestab
214) SCREW SPECIAL DRG NO MCT 1137 1[74]() Specification : SCREW SPECIAL DRG.NO.MCT-1137/1 C Nonestab
215) SCREW TAPPING THREAD FORMING MCT 1130 2 FOR SIGHT UNIT CASED 102B[74]() Specification : SCREW TAPPING THREAD FORMING MCT-1130/2 FOR SIGHT UNIT CASED 102B C Nonestab
216) SCREW TO DRG NO MCT 3127 1 FOR TNP 165A T 72[74]() Specification : SCREW TO DRG.NO.MCT-3127/1. FOR TNP-165A U/O T-72. C Nonestab
217) SEAL GASKET TO DRG NO MCT 1417[74]() Specification : SEAL/GASKET TO DRG NO. (MCT-1417) C Nonestab
218) SET OF DIAL SCALE CONSIST OF 2 COMPONENT 1 DIAL SCALE VERTICAL MCT2514 1 2DIAL SCALE LATERAL MCT 2515 1[74]() Specification : SET OF DIAL SCALE,CONSIST.OF 2 COMPONENT 1.DIAL SCALE ,VERTICAL. MCT-2514/1 1/SET .2.DIAL SCALE,LATERAL MCT-2515/1 1/SET C Nonestab
219) SET SCREW DIN 551 FOR H R BINO[17]() Specification : SET SCREW DIN 551-M2X2-MS FOR H.R.BINO C Nonestab
220) SHADE OPT INST DRG NO 1035 61[74]() Specification : SHADE OPT. INST. DRG.NO.1035/61 C Nonestab
221) SHADE OPTICAL INSTRUMENT[74]() Specification : RETICLE, OPTICAL INSTRUMENT, AS PER DRG.NO.GF-235113H. C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2 C Nonestab
2) KNOB ASSY 551 441 TO MCT 2316 1[74]() Specification : KNOB ASSY(551+441)TO MCT-2316/1 COMPRNG. (1).KNOB MARKED MCT-2276/1:1/SET,(2)LOCKING SLEEVE MCT-2303/1:-1/SET,(3).CMPRN SPRING MCT-2304/1 1/SET,(4).RETAINING RING :-1/SET, (5).BALL DIA 3.00MM:-3/SET (6).RTNG KNOB MCT2308:1/SET,(7).KNOB MC C Nonestab
3) KNOB ASSY 651 441 TO MCT 2317 1[74]() Specification : KNOB ASSY (651+441)TO MCT-2317/1 COMPRISING 1.KNOB MARKED MCT2310/1,2.LOCKING SLEEVE MCT2303/1,3.COMPRESSION SPRING MCT2304/1 4-RETAINING KNOB MCT-2308 5.SCALE PLATE MCT-2312/1, 6.KNOB MCT-2311 C Nonestab
4) ELEVATION CURVE 557 TO DRG NO CQA I 792 7[74]() Specification : ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7 C Nonestab
5) KNOB 502 441 ASSY AS PER DRG NO MCT 3487[74]() Specification : KNOB 502 + 441 ASSY AS PER DRG.NO.: MCT-3487 C Nonestab
6) KNOB 751 441 ASSY AS PER DRG NO MCT 3478[74]() Specification : KNOB 751+441 ASSY AS PER DRG.NO.:MCT-3478 C Nonestab
7) MACHINING OF CASTING TO DRG NO CWC 240 56 FOR HOUSING[74]() Specification : MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING C Nonestab
8) ROCKER BRACKET ASSEMBLY AS PER DRG NO GF 230107[74]() Specification : ROCKER BRACKET ASSEMBLY AS PER DRG NO. GF -230107 C Nonestab
9) SET OF COMPONENTS CAMERAS PAINT CAMERAS ASSY REF ASSY PLAN DRG NO Y25652A00 SHEET 08 OF 39 TO 16 OF 39 DETAILS AS PER ANNEXURE C[74]() Specification : SET OF COMPONENTS CAMERAS PAINT CAMERAS ASSY REF ASSY PLAN DRG NO Y25652A00 SHEET 08 OF 39 TO 16 OF 39 DETAILS AS PER ANNEXURE C C Nonestab
10) SET OF COMPONENT CCD DAY CAM SET OF MECHANICAL HOUSING ASSEMBLY CCD DAY CAMERA REF ASSY PLAN DRG NO 901 140 DETAILS AS PER ANNEXURE A[74]() Specification : SET OF COMPONENT CCD DAY CAM SET OF MECHANICAL HOUSING ASSEMBLY CCD DAY CAMERA REF ASSY PLAN DRG NO 901 140 DETAILS AS PER ANNEXURE A C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MACHINING OF COVER TO DRG. NO. MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD. FACT. DEHRADUN. () As per required Specification C Not Estab.
2) LEVEL INDICATOR TO DRG. NO. MCT-3250 FOR CLINOMETER 2A 46.() As per required Specification C Not Estab.
3) LAMP HEAD ATTACHMENT AS PER DRG. NO.MCT-3211.() As per required Specification C Not Estab.
4) CASE TO DRG. NO. MCT-2427.() As per required Specification C Not Estab.
5) PLATE INDEXING FIXTURE TO DRG. NO. MCT-2477.() As per required Specification C Not Estab.
6) MACHINING OF BASE PLATE TO DRG. NO. MCT-2464/1 CASTING/SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY OFDUN.() As per required Specification C Not Estab.
7) CASE TO DRG. NO. MCT-2483/3. () As per required Specification C Not Estab.
8) DIAL CONTROL FIXED TO DRG. NO. MCT-3242 FOR SIGHT DIAL 104A. () As per required Specification C Not Estab.
9) PLATE TO DRG. NO. MCT-2476.() As per required Specification C Not Estab.
10) CELL OPTICAL ELEMENT TO DRG. NO. MCT-2941/1 FOR HR BINO 8X30.() As per required Specification C Not Estab.
11) OPTICAL ELEMENT DRG. NO. MCT-2942-1 FOR BINOCULAR 8*30 R.() As per required Specification C Not Estab.
12) CLAMP SCREW ADJUSTABLE DRG. NO. IRDE-1166/4 FOR COLLIMETER INFINITY.() As per required Specification C Not Estab.
13) MECHINING OF BEARING BOTTOM TO DRG. NO. MCT-2900/1, MCT-2903, MCT-2904 FOR MOUNT TELESCOPE-102A. NOTE:- CASTING OF BEARING BOTTOM WILL BE PROVIDED BY OFDUN.() As per required Specification C Not Estab.
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) SET OF COMPONENT PLATE ELEVATION[74]() Specification : SET OF COMPONENT PLATE ELEVATION C Nonestab
2) SET OF SUPPORT CAMERA[74]() Specification : SET OF SUPPORT CAMERA C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) SCREW DRIVER NO.7 TO DRG.NO.MCT-796/2.() As per required specification C Not Estb.
2) MIRROR MOUNT DRG. NO. IRDE-1175/83.() As per required specification C Not Estb
3) CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8.() As per required specification C Not Estb
4) COVER PLATE PROTECTIVE, DUST AND MOISTURE CII-140/6. () As per required specification C Not Estb
5) TUBE ASSEMBLY TO DRG. NO.MCT-2459 FOR D-7. () As per required specification C Not Estb
6) CASE TO DRG. NO. MCT-2428/1.() As per required specification C Not Estb
7) MACHINING OF BRACKET TO DRG. NO. MCT-2435 T0 2438 CASTING WILL BE SUPPLIED BY ORD.FY.D.DUN.() As per required specification C Not Estb
8) HEAD MCT-2445. () As per required specification C Not Estb
9) CELL TO DRG NO. MCT-3237 FOR D-7. () As per required specification C Not Estb
10) PLATE TO DRG. NO.MCT-2473.() As per required specification C Not Estb
11) TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7. () As per required specification C Not Estb
12) SOCKET AS PER DRG.NO.MCT-3073 SHEET NO.-3 OF 6.() As per required specification C Not Estb
13) CAP TO DRG. NO. OS-34609, MCT-2835 FOR DFC-7. () As per required specification C Not Estb
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) SET OF COMPONENT COVER POD[74]() Specification : SET OF COMPONENT COVER POD C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) set of O ring LRF[74]() Specification : As per specification scope of work C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun

[ENR Registration]
Name Specification Use Status
1) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD Description : MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD() Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Dehradun

[ENR Registration]
Name Specification Use Status
1) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD Description : MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD() Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD C Estab
Category : p
Grade : 2
Size : S
414 DTK AUTO PRESS COMPS PVT LTD
D-10, MIDC, WALUJ, KAMGAR CHOWK AURANGABAD Maharashtra
PIN1 : 431136
Phone No. : 2556735
GSTIN : 27AADCD2921R1ZB 		NSKD03451A

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX STEEL NO. S 6 MK1 DRG.ARDE 2225[65]() Specification : DRG. NO. ARDE 2225 SHEET NO.3 C Nonestab
2) BOX NO.428 MK.1[65]() Specification : DRG. NO. D.D.(L) 18704 C Nonestab
3) BOX NO. 582 MK-1[65]() Specification : IA-1163 C Nonestab
4) BOX M 104 MK1 PAINTED OLIVE GREEN[65]() Specification : IA 1169 C Nonestab
5) BOX G 70 MK1(STEEL)OLIVE GREEN.[65]() Specification : IA 1169 C Nonestab
6) BOX H2A DRG CIA AMMN 468[65]() Specification : IA 1169 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) WASHER DELAY CIA 1804[6140700341]() Specification : CQA(A)1804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CUPS TO DRG NO ARDE 2043 DET NO 5[60]() Specification : CQA(A) 2804 R Nonestab
2) ALUMINIUM WASHER DRG.NO. ARDE 2078[60]() Specification : DRG.NO. ARDE/2078 DETAIL NO. 8 DT.27-8-87. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804[61]() Specification : CQA(A)1804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ALUMINIUM STRIP 0.56TH X34.3MM W[06]() Specification : IS:737-2008 (FOURTH REVISION)GRADE 19000 R Nonestab
2) ALUMINIUM STRIP 0.46+0.04MM-0.05MM X34.3MM[06]() Specification : IS 737-2008 (4TH REVISION) GRADE 19000 R Nonestab
3) AL STRIP 0.50 0.2TH X 38 0.2m W[06]() Specification : IS:737-2008 FOURTH REVISION R Nonestab
4) AL STRIP ANNEALED 0.71 MM +- 0.02MM[06]() Specification : IS :737-2008 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL WASHER TO DRG.ARDE/2165 DET 3[60]() Specification : SPECN. ARDE/SPECN/423 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ALUMINIUM WASHER DRG.NO. ARDE 2078[60]() Specification : DRG.NO. ARDE/2078 DETAIL NO. 8 DT.27-8-87. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804[61]() Specification : CQA(A)1804 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL WASHER TO DRG.ARDE/2165 DET 3[60]() Specification : SPECN. ARDE/SPECN/423 C Nonestab
Category :
Grade : Grade III
Size : S
415 MEENAKSHI METAL FORMS
GAT NO 358, 361, 62, 365 PLOT NO 13, 14, 15, 16 CHAKAN AMBETHAN ROAD WMDC CHAKAN PUNE Maharashtra
PIN1 : 410501
Phone No. : 2135253190
GSTIN : 27AAPFM0176Q1ZJ 		AAPFM0176Q

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Set of WASHER[90]() Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET C Nonestab
2) LPTA GUIDE PLATE FRONT[90]() Specification : GUIDE PLATE CAST FRONT IPL-BS -III-LPTA-715 IPL SL.NO.03 OF SPRNG & SUSPENSION ITEM 042-322-0024Jb(FRONT SPRING U BOLT) C Nonestab
3) LPTA Tie Member[90]() Specification : Assy Tie-Member C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Assy Cross Members without AF Mtg Bkt 1st X Member[90]() Specification : ASSY. CROSS MEMBER (WITHOUT AIR FILTER MTG. BKT.) DRG. NO. 215431200116-V1. CONSISTING OF DRG. NO. (I) 215431207117 Bv1 ) 261431207132 b(V1) (III) 3423100006-b V1 C Nonestab
2) LPTA Assy 5th Cross Members BS III 715[90]() Specification : 5TH CROSS MEMBER BS-III 715 LPTA VEHICLE, PART NO. 263631208201-A1-a-V2 C Nonestab
3) LPTA Assy Cross Members Rear Shock Absorber[90]() Specification : ASSY. CROSS MEMBER (REAR SHOCK ABSORBER) FOR LPTA 715 TC/32 BS-III PART NO 2624.3265.0101N (REF. DRG NO 2574.3265.0106b) C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Vehicle Identification plate[90]() Specification : VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE C Nonestab
2) LPTA Tie Member[90]() Specification : Assy Tie-Member C Estab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Trade assistance for laser cutting of 4 MM armour plate at firm details as per annexure A[90]() Specification : Trade assistance for laser cutting of 4MM armour plate at firm details as per annexure- ‘A’. R Nonestab
2) Trade assistance for laser cutting of 6 MM armour plate at firm details as per annexure A[90]() Specification : Trade assistance for laser cutting of 6MM armour plate at firm details as per annexure- ‘A’. R Nonestab
Category :
Grade : Grade III
Size : L
416 Well Dress India
R-7/5 Raj Nagar Ghaziabad Uttar Pradesh
PIN1 : 201001
Phone No. : 9910131442
GSTIN : 09AJQPM8524Q1Z4 		AJQPM8524Q

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Polyester Satin Piping 7 cm OG() OCFS/BLANKET SUPERIOR OG/PIPING/2012 R Not Estab.
2) Polyester Satin Piping 7 cm Red() OCFS/BLANKET HOSPITAL RED/PIPING/2012(REV. NO.1) R Not Estab.
3) Polyester Satin Piping 7 cm AF Blue() OCFS/BLANKET AF BLUE/POLY PIPING(REV. NO.2) R Not Estab.
4) Polyester Satin Piping 7 cm Navy Blue() OCFS/BLANKET SUPERIOR OG/PIPING/2012 EXCEPT THAT SHADE SHALL BE MATCHING WITH PANTONE NO. 19-3933 TPX AND CLAUSE A-II(MANUFACTURE) OF THE SPECIFICATION SHALL NOT BE APPLICABLE R Not Estab.
5) Fabrication of Shirt Mans Angola Drab Poly Wool Modified Pattern 2012() IND/TC/4552 (1) & Approved Sample E Non Established
6) Fabrication of Jacket Combat PC Dis. with Indian Army Logo() OCFAv/Garment/001(a) & Approved Sample /OCFAv/Garment/001 (b) & Approved Sample E Non Established
7) Fabrication of Trousers Combat PC Dis. With Indian Army Logo() OCFAv/Garment/002 (a) & Approved Sample/ OCFAv/Garment/002 (b) & Approved Sample E Non Established
8) BORDER STITCHING ON BLANKET AIR FORCE BLUE() BORDER STITCHING ON BLANKET AIR FORCE BLUE AS PER INSTRUCTIONS CONTAINED IN THE CLAUSE MATERIAL (PIPING) OF SPECN.NO.AIR HQ/DQAS/AK-017 E Non Established
9) FABRICATION OF COAT ECC (IMP.VER.)() FABRICATION OF COAT ECC(IMP.VER.)AS PER SPECIFICATION NO.IND/TC/4587(C) AND APPROVED SAMPLE.As per relevant clause of specification E Non Established
Category : DP
Grade : II
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) POLYESTER SATIN PIPING 7 CM OG[21]() Specification : AS PER REQUIREMENTS & SPECIFICATIONS R Estab
2) Polyester Satin Piping 7 cm Red[21]() Specification : As per Requirements & Specifications R Estab
3) Polyester Satin Piping 7 cm AF Blue[21]() Specification : OCFS/BLANKET AF BLUE/POLY PIPING(REV. NO.2) R Estab
4) Polyester Satin Piping 7 cm Navy Blue[21]() Specification : OCFS/BLANKET SUPERIOR OG/PIPING/2012 EXCEPT THAT SHADE SHALL BE MATCHING WITH PANTONE NO. 19-3933 TPX AND CLAUSE A-II(MANUFACTURE) OF THE SPECIFICATION SHALL NOT BE APPLICABLE R Estab
5) BORDER STITCHING ON BLANKET AIR FORCE BLUE[21]() Specification : AS PER INSTRUCTIONS CONTAINED IN THE CLAUSE MATERIAL (PIPING) OF SPECN.NO.AIR HQ/DQAS/AK-017 R Estab
6) Fabrication of Trousers Combat PC Dis. With Indian Army Logo[21]() Specification : OCFAv/Garment/002 (a) & Approved Sample/ OCFAv/Garment/002 (b) & Approved Sample R Estab
7) Fabrication of Jacket Combat PC Dis. with Indian Army Logo[21]() Specification : OCFAv/Garment/001(a) & Approved Sample /OCFAv/Garment/001 (b) & Approved Sample R Estab
8) FABRICATION OF COAT ECC (IMP.VER.)[21]() Specification : FABRICATION OF COAT ECC(IMP.VER.)AS PER SPECIFICATION NO.IND/TC/4587(C) AND APPROVED SAMPLE.As per relevant clause of specification R Estab
9) Fabrication of Shirt Mans Angola Drab Poly Wool Modified Pattern 2012[21]() Specification : IND/TC/4552 (1) & Approved Sample R Estab
10) FABRICATION OF JCD AND TCD IAL 220 GSM IN SET[17]() Specification : OCFAv/GARMENT/001(c)AND OCFAv/GARMENT/002(c) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 220 GSM INSET E Nonestab
11) FABRICATION OF JCD AND TCD IAL 250 GSM IN SET[17]() Specification : OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET E Nonestab
Category : DP
Grade : II
Size :
1) Ordnance Equipment Factory
Name Specification Use Status
1) SYN. TAPE 13 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
2) SYN. TAPE 25 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
3) SYN. TAPE 50 MM PV DOPE DYED O.G.() AS PER REQUIREMENT & SPECIFICATION R
4) TAPE POLYESTER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
5) WEB POLYPROPELENE/WEB POLYESTER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
6) TAPE NEWAR POLYESTER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
7) TAPE NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
8) TAPE NEWAR VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
9) WEBBING NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
10) LT. WT. WEB COTTON or WEB COTTON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
Category : P
Grade : III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) 100% POLYESTER TAPE 12.7 MM[21]() Specification : AS PER SPECIFICATION R Estab
2) Ribbon Nylon 50 mm U/D[21]() Specification : ADRDE/SPC/1983/12 (a) R Estab
3) Ribbon Nylon 16 mm U/D[21]() Specification : ADRDE/SPC/1983/12 (a) R Estab
4) Tape Nylon - 13 mm 70 Kgf U/D[21]() Specification : As per specification R Estab
5) Tape Nylon - 26 mm 1000 Kgf U/D[21]() Specification : As per specification R Estab
6) Tape Nylon - 26 mm 600 Kgf U/D[21]() Specification : As per specification R Estab
7) Tape Nylon - 26 mm 200 Kgf U/D[21]() Specification : As per specification R Estab
8) Tape Nylon - 16 mm 200 Kgf U/D[21]() Specification : As per specification R Estab
9) Tape Nylon - 26 mm 500 Kgf U/D[21]() Specification : As per specification R Estab
10) Tape Nylon - 25 mm 550 Kgf U/D[21]() Specification : As per specification R Estab
11) Tape Nylon - 13 mm 260 Kgf OG[21]() Specification : As per specification R Estab
12) Tape Nylon - 20 mm 750 Kgf OG[21]() Specification : As per specification R Estab
13) Tape Nylon - 30 mm 580 Kgf OG[21]() Specification : As per specification R Estab
14) Tape Nylon - 14 mm 230 Kgf U/D[21]() Specification : As per specification R Estab
15) Tape Nylon - 20 mm 1350 Kgf U/D[21]() Specification : As per specification R Estab
16) Tape Newar 100% Polyester Fibre Dyed 50 mm[21]() Specification : As per specification R Estab
17) Tape Newar 100% Polyester Fibre Dyed 25 mm[21]() Specification : As per specification R Estab
18) Tape Newar 100% Polyester Fibre Dyed 13 mm[21]() Specification : As per specification R Estab
Category : P
Grade : III
Size : S
1) Ordnance Equipment Factory Hazaratpur

[ENR Registration]
Name Specification Use Status
1) Description : 100 % POLYESTER TAPE 25 MM WHITE, BS 250 kgf() Specification : IS 3255:1979 (Except material) R Estab
2) Description : TAPE NYLON THICK 13 MM, 25 MM, 50 MM & 68 MM OG() Specification : DMSRDE/T&GS/92/403 R Estab
Category : ddp
Grade : 3
Size : S
417 JAZS TRADING CORPORATION
9/1, PRAN KRISHNA MUKHERJEE ROAD KOLKATA WEST BENGAL
PIN1 : 700002
Phone No. : (003) 3296-9909/2555-3545 		CALJ05027B

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) PLASTIC MOLDING COMPONENTS() AS PER DRG. & SPECIFICATION C Nonestab
2) POLY PROPYLENE BOX() AS PER DRG. & SPECIFICATION C Nonestab
Category : P
Grade : II
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) CONTAINER M 9120B Description : CONTAINER M 9120B() Specification : CONTAINER AS PER DRG. NO. M-9120B C Estab
2) CONTAINER AS PER DRG NO M 9121 B Description : CONTAINER AS PER DRG NO M 9121 B() Specification : AS PER DRG C Estab
3) POLYPROPYLENE CORRUGATED PACKING BOX CO 437 Description : POLYPROPYLENE CORRUGATED PACKING BOX CO 437() Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 C Estab
4) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-492 A Description : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-492 A() Specification : AS PER DRAWING C Estab
5) PACKING BOX TO DRG. NO. CO-436 Description : PACKING BOX TO DRG. NO. CO-436() Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-436 C Estab
6) Polypropylene Corrugated packing box drg. no. CO-488 B Description : Polypropylene Corrugated packing box drg. no. CO-488 B() Specification : AS PER DRAWING C Estab
7) POLY PROPYLENE CORRUGATED PACKING BOX TO DRG. NO- CO-453 B Description : POLY PROPYLENE CORRUGATED PACKING BOX TO DRG. NO- CO-453 B() Specification : AS PER DRG. C Estab
8) POLYPROPYLENE CORRUGATED PACKING BOX CO 503 Description : POLYPROPYLENE CORRUGATED PACKING BOX CO 503() Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-503 C Estab
9) Polypropylene Corrugated packing box drg. no. CO-498 Description : Polypropylene Corrugated packing box drg. no. CO-498() Specification : as per drawing C Estab
10) POLYPROPYLENE CORRUGATED PACKING BOX CO 499 Description : POLYPROPYLENE CORRUGATED PACKING BOX CO 499() Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-499 C Estab
11) PLASTIC CONTAINER FOR FUZE DA5A PACKING M 10699 Description : PLASTIC CONTAINER FOR FUZE DA5A PACKING M 10699() Specification : PLASTIC CONTAINER FOR FUZE DA5A PACKING AS PER DRG. NO. M-10699 C Estab
12) PLASTIC BOX CO 426 B Description : PLASTIC BOX CO 426 B() Specification : PLASTIC BOX TO DRG. NO: CO-426/B C Estab
13) POLYPROPYLENE CORRUGATED PACKING BOX CO 475 Description : POLYPROPYLENE CORRUGATED PACKING BOX CO 475() Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475 C Estab
14) PLASTIC ROUND CONTAINER M 9938 Description : PLASTIC ROUND CONTAINER M 9938() Specification : PLASTIC ROUND CONTAINER TO DRG. NO. M-9938/A TYPE-A C Estab
15) PLASTIC ROUND CONTAINER TO SIZE TYPE A & B Description : PLASTIC ROUND CONTAINER TO SIZE TYPE A & B() Specification : PLASTIC ROUND CONTAINER TO SIZE TYPE A & B TO DRG. NO.-M-9938A C Estab
16) PROTECTIVE CAP IQX 795 Description : PROTECTIVE CAP IQX 795() Specification : PROTECTIVE CAP (IQX-795) IN F/C C Estab
17) Plastic Liner to Part No M6810 1 Description : Plastic Liner to Part No M6810 1() Specification : AS PER DRG. No M6810/1 C Estab
18) PLUG TRANSIT TO DRG NO ITV 33 ALONG WITH WASHER TO DRG NO M 10688 Description : PLUG TRANSIT TO DRG NO ITV 33 ALONG WITH WASHER TO DRG NO M 10688() Specification : PLUG TRANSIT TO DRG. NO. ITV-33 ALONG WITH WASHER TO DRG. NO. M-10688 C Estab
19) PLUG ITV 171 Description : PLUG ITV 171() Specification : PLUG TO DRG. NO. ITV-171 C Estab
20) TRANSIT RING 9102 00 01 00 01 006 00TA Description : TRANSIT RING 9102 00 01 00 01 006 00TA() Specification : TRANSIT RING TO DRG. NO. 9102-00-01-00-01-006-00TA C Estab
21) CAP M 10411 Description : CAP M 10411() Specification : CAP TO DRG. NO. M-10411 IN F/C C Estab
22) TRANSIT CAP OTF S 033 Description : TRANSIT CAP OTF S 033() Specification : AS PER DRAWING C Estab
23) PROTECTION CAP US 939000003 Description : PROTECTION CAP US 939000003() Specification : PROTECTION CAP AS PER DRG. NO US-939000003 C Estab
24) TRANSIT PLUG 9102 00 01 005 00TA Description : TRANSIT PLUG 9102 00 01 005 00TA() Specification : TRANSIT PLUG TO DRG. NO. 9102-00-01-00-005-00TA C Estab
Category : p
Grade : 2
Size : S
418 PRAKASH INDUSTRIES
J-3, PANKI INDUSTRIAL AREA PANKI , SITE 3 KANPUR NAGAR Uttar Pradesh
PIN1 : 208022
Phone No. : 6388942418
GSTIN : 09AAHFP2206L1Z5 		AAHFP2206L

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) BOX FIBRE BOARD RIGID CORRUGATED TRIPLE WALL 7 PLY SIZE 625X400X350MM[21]() Specification : CQA(GS)/US/460 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BOX FIBRE BOARD RIGID CORRUGATED DOUBLE WALL 5 PLY SIZE 420MM X 330MM X 375MM[21]() Specification : IS:2771 (Part-1):1990 Reaffirmed 2002 will be followed for R Estab
2) BOX FIBRE BOARD RIGID CORRUGATED TRIPLE WALL 7 PLY SIZE 700X450X400 MM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BOX CORRUGATED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
419 SHAMA CONCAST PVT. LTD.
10TH LANE, UDYOG NAGAR, VILL. RANDHAWA MASANDA JALANDHAR PUNJAB
PIN1 : 144004
Phone No. : 01812421201
GSTIN : 03AARCS6034J1Z4 		JLDS09682B

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR TA GUIDE() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) FORGING FOR TA SHOE() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) FORGING FOR TA CLAMP() AS PER OFM SPECIFICATION C NOT ESTABLISHED
4) T.A. BOLT M20() AS PER OFM SPECIFICATION C NOT ESTABLISHED
5) T.A. BOLT M27() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FORGED BODY REAR PART TO OFAJ DRG NO F 10D OR GSF DRG NO M 10177 A FOR BOMB 81 mm MORTAR C EMPTY BODY[62]() Specification : FORGED BODY (REAR PART) TO OFAJ DRG. NO. F-10D OR GSF DRG. NO. M-10177 A FOR BOMB 81 mm MORTAR C (EMPTY BODY) R Nonestab
Category :
Grade : Grade III
Size : M
420 Birmi Spinning Mills Pvt. Ltd.
Khotpura Road, Ganjbar Panipat Haryana
PIN1 : 132103
Phone No. : 9671000051
GSTIN : 06AACCB4592K1ZH 		RTKB03323F

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Yarn Wool Polyamide (80:20) 240 Tex OG() OCFS/YARN WOOL POLYAMIDE(80:20) 240 TEX OG/2012 AND ANNEXURE-I ATTACHED R Not Estab.
2) Yarn Wool Polyamide (80:20) 240 Tex Red() OCFS/YARN WOOL POLYAMIDE(80:20) 240 TEX RED/2012 AND ANNEXURE-I ATTACHED R Not Estab.
Category : P
Grade : II
Size : S