1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
DRG.NO. ARDE 2011 DET 11 PT NO.ITV 153 WITH NUT FOR DEALY HOLDER TO DRG.NO.ARDE 2011 DET 12 PT NO ITV 154 SPECN .NO CQA(A) 2321 (b)
C
Non Established
45) BOMB BODY (E)FOR 120MM ILLG.()
DRG NO.ARDE 2011 PT. NO. ITV - 12 SA SPECN. NO. CQA (A) 2321 (b)
C
Non Established
46) TORPEDO IGNITION CARTG.(EMPTY) ()
(I) CONTAINER TODRG.NO.NAD 19502/2/1 (II) RING TO DRG NO.NAD 19502/3/3(III) CARTG CASE TO DRG NO.NAD 19502/1.
C
Non Established
47) GENERATOR SMOKE ASSY(EMPTY)()
DRG.NO.CQA(A)/AMN/2808 PART.NO.IQW7 GE DRG.NO.IQW 16 SA DRG. IQW 209 RG.IQW.210
C
Non Established
48) GENERATOR SMOKE NO. 5 MK-1 (EMPTY)()
DRG. NO. ARM 1023 D2 EMPTY CONSISTING OF 1) LID 2)BAFFLE PLATE 3) BODY 4) BOTTOM 5) SOLDERING TAG 6) TEAR OFF DISC SPECN. NO. DTD & P (AIR) 207/ARM-RAW MATERIAL AS PER SPECN. IS-1993-2006 (FOURTH REV.) COLD REDUCED ELECTROLYTIC TIN PLATE)
DRG.NO.ARDE 2024/DET.1 CONSISTING OF :(1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSYTO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRGNO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5(5)MULTI-TOOTH LOCK WASHER B-6-4 TO IS:5
C
Non Established
51) A SET OF LID, BOOSTER TUBE, CASE RING()
(1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Non Established
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[62]()
Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91
C
Estab
5) SET OF14 ITEMS WITH PERFORATED DISC (9911356669)[99]()
Specification : SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET
C
Estab
6) SWITCH NO 5 EMPT. W/O SNOUT SWITCH (9911357321)[99]()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
C
Estab
7) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Estab
8) SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866)[99]()
Specification : SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.
C
Estab
9) AFT CLOSURE BLANK FOR HEAT-551 (9911357918)[99]()
Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.
Specification : SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt
C
Estab
Category : p
Grade : Grade III
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) BAYONET FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
2) BIPOD ASSEMBLY FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
3) BRACKET SIGHT NO.1 FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
4) TRIGGER ASSEMBLY FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
5) PLATE BUTT ASSY FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
6) SMALL & MEDIUM FORGINGS FOR SMALL ARMS()
AS PER SPECIFICATION
C
Estab.
7) STRIKER MECHANISM HOUSING MODIFIED- ZINK ALLOY TO DRG. NO. SK-5723 THROUGH –DIE CASTING ()
AS PER DRG.
C
Established
Category : DDP,DP
Grade : II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CONE (SK NO OTF/S/015) TO DRG NO 4-025998 DET NO 069 FOR 125MM HEAT[62]()
Specification : CONE (SK NO OTF/S/015) DRG NO 4-025998 DET NO 069 FOR 125MM HEAT
C
Nonestab
2) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
3) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]()
Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
R
Nonestab
4) BLANK FOR BODY CASTING FOR 84 MM TPT[61]()
Specification : AS PER DRG.& SPECIFICATION
C
Nonestab
5) FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E[61]()
Specification : AS PER DRG
C
Nonestab
6) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709[63]()
Specification : BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709,
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CONE (SK NO OTF/S/015) TO DRG NO 4-025998 DET NO 069 FOR 125MM HEAT[62]()
Specification : CONE (SK NO OTF/S/015) DRG NO 4-025998 DET NO 069 FOR 125MM HEAT
C
Nonestab
2) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
3) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]()
Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
R
Nonestab
4) BLANK FOR BODY CASTING FOR 84 MM TPT[61]()
Specification : AS PER DRG.& SPECIFICATION
C
Nonestab
5) FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E[61]()
Specification : AS PER DRG
C
Nonestab
6) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709[63]()
Specification : BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709,
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]()
Specification : AS PER DRAWING
C
Nonestab
2) 84mm TPT PROJECTILE BODY TO GSF DRG. NO M-11229 IN FINISH MACHINED CONDITION[61]()
Specification : AS PER DRG.
C
Nonestab
3) COOLING TANK WITH PUMP UNIT AK-630 SB AS[72]()
Specification : COOLING TANK WITH PUMP UNIT AK-630 SB AS
C
Nonestab
4) DRUM ASSY. AK-630 SB 118 SB[72]()
Specification : AS PER DRAWING
C
Nonestab
5) TRIGGER ASSY. IRCL-563 (GF-165018 H) IN F/C[71]()
Specification : AS PER DRAWING
C
Nonestab
6) TRIGGER TO DRG.NO. GF 125069 P (RRF020100) IN F/C[71]()
1) BLANK FOR DISTANCE TUBE TO OFAJ DRG NO CC 533 C[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) SINGLE PROJECTILE FOR 40MM PRACTICE[60]()
Specification : SINGLE PROJECTILE FOR 40MM PRACTICE MK-II & PROOF MK-II AS PER SPECIFICATION NO. AFK/SPECIFICATION NO. 68
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922[63]()
Specification : CQA(A) 0922
C
Nonestab
2) FUZE PERCN DA NO.117 MK 20 EMPTY/COMPLETE/WITH CAP DESGN REF L5/10744/GE/341 PART NO. QX 244 GE AND ITEM LIST FOR QX 244 GE DESGN REF NO.(I.A.6900) L5 / 10744 / GE / 341, SPECN NO. I.A. 1204[63]()
Specification : I.A. 1204
C
Nonestab
3) FUZE PERCN.D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DESIGN.REF.NO. CIA/AMN/273 PT.NO. IQX 35 GE SPECN. NO. CQA(A) 0917[63]()
Specification : CQA(A) 0917
C
Nonestab
4) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009[60]()
1) CARTG. TRAINING FOR 81 MM MOR BOMB 3 A ( EMPTY ASSY. ) DRG. NO. ARDE 2254 SHT.NO 4 PT.NO. IRW-3GE SPECN.NO. CQA (A) 2348[60]()
Specification : CQA (A) 2348
C
Nonestab
2) CARTRIDGE TRAINING FOR 81MM MORTAR BOMB 3B (EMPTY ASSLY) (WITH BASE CARTRIDGE FOR CH II)TO DRG NO ARDE 2254 SHEET NO 4 PART NO IRW-3 GE SPECIFICATION NO. CQA (A) 2348[60]()
Specification : CQA (A) 2348
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E[60]()
Specification : CQA[A] SEALED DRG NO 04-749-130222-02.1E
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
2) CSE FOR H4HA SEAT OF HJT16 A/C[60]()
Specification : 1) CSE PRI. DRG. ARDE: 1460/1 CASE,WASHER & DISC, RING SEALING, DISC 2) CSE SEC. ARDE:1765/1 CUP & SUPPORT, COVER & DISC, RING SEALING 3) CSE DROGUE DRG. ARDE 1657/1-CASE,DISC, WASHER
1) PLUNGER BLANK FOR 84 HEAT-551 (9911357919)
Description : PLUNGER BLANK FOR 84 HEAT-551 (9911357919)()
Specification : PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.
C
Estab
Category : p
Grade : 1
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SLOTTED CHEESE HEAD SCREW M5X35 LENGTH[90]()
Specification : SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)
C
Estab
2) SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH[90]()
Specification : SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH DRG. NO. S-1822 FOR ERA BOX
R
Nonestab
3) SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH[90]()
Specification : SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]()
Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]()
Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SPRING 5209544 FOR HEAT-551. (9911357927)[99]()
Specification : SPRING TO DRG NO.301100269.
C
Estab
2) DIAPHRAGM TO DRG.NO.TRD-2-2-2244. (9911357863)[99]()
Specification : DIAPHRAGM TO DRG.NO.TRD-2-2-2244.
C
Estab
3) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
Specification : BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) WARHEAD BODY ASSY. 3074 310 FOR 551. (9911357816)[99]()
Specification : WARHEAD BODY ASSEMBLY TO DRG NO.3074 310.
C
Nonestab
2) BASE PLATE 7.8 MM FOR TPT/HEAT (6170444700)[61]()
Specification : BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AV
C
Nonestab
3) BASE PLATE 8.5 MM FOR HE/ILLG. (6170444690)[61]()
Specification : BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVO
C
Nonestab
4) ASSY OF S&A(EMPTY) COMPONENTS PFFC[99]()
Specification : ASSEMBLY OF S&A (EMPTY) COMPONENTS,CONSISTING OF FOLLOWING COMPONENTS AS PER ATTACHED LIST.NOTE- QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL.ATTACHED.ENCL.-2
C
Nonestab
5) FUZE A670 M ASSY (EMPTY) EX-FD/LP (9911353080)[99]()
Specification : NOSE FUZE GRADE A-670M ASSEMBLY (EMPTY) TO DRG NO.____3.140 -039____ DC(I)-34241-A DATE 24/9/87 PROGRAMME AND TEST PROCE-DURE AS PER ALBUM NO.D-2040, SHEET NO.____3.140.039____(12 SHEETS) DC-34241-A DTD 24/09/87.
C
Nonestab
6) EMPTY FUZE B-25M TO DRG.TRD-1778 (9911357354)[99]()
Specification : EMPTY ASSY.FUZE 25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
C
Nonestab
7) SAFETY SPRING TO TRD DRG NO.(551) (9911358125)[99]()
Specification : SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Description : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)()
Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
C
Estab
Category : p
Grade : 2
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Description : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)()
Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
C
Estab
Category : p
Grade : 2
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Description : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)()
Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
C
Estab
Category : p
Grade : 2
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) CASE CARTG IRW 171
Description : CASE CARTG IRW 171()
Specification : CASE CARTG. DRG. NO. IRW-171 IN F/C
C
Estab
2) SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B
Description : SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B()
Specification : SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B
C
Estab
3) BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011
Description : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011()
Specification : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011
C
Estab
4) BODY SEMI MACHJINED M 10180 C
Description : BODY SEMI MACHJINED M 10180 C()
Specification : BODY SEMI MACHINED TO DRG NO M 10180 C
C
Estab
5) FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
Description : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)()
Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
C
Estab
6) HEAD ASSY IQX 78 A
Description : HEAD ASSY IQX 78 A()
Specification : HEAD ASSY IN F/ CONDITION ARDE 1926. DET NO. 5 PT NO-IQX-78 A
C
Estab
7) COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB
Description : COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB()
Specification : As per Drawing
C
Estab
Category : dp
Grade : 2
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP YA-5 FOR A30 T DET[65]()
Specification : CUP YA-5 FOR A30-T(DET) TO DRG NO. FOR PRIMER DETONATOR A-30-T CQA(A)/AMMN/2856, DC NO-37271.A DT. 08.11.10 SCANNED ON DT DT. 05.01.2011
C
Nonestab
2) CAP KG 4 FOR A30 T DETONATOR[65]()
Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE
Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP CONDUCTING COMPOSITION[62]()
Specification : CAP CONDUCTING COMPOSITION (EMPTY) TO DESIGNER REF NO.1A4167,PART NO QX-115A TO DC NO 36230-A DTD.29.01.1997 FOR PRIMER 1 A/L
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) FORGING OF FIN BODY FOR 125MM HE
Description : FORGING OF FIN BODY FOR 125MM HE()
Specification : AL.ALLOY B-95 OF GOST-4784-74 OR ALTERNATIVELY DTD.5024 IN WP COND.TO OFDC DRG.NO.F-124 (e)
R
Estab
2) COMPLETE ASSY OF CD-1 IN FC
Description : COMPLETE ASSY OF CD-1 IN FC()
Specification : DRG.NO.SK--2885
C
Estab
3) COMPLETE ASSY OF CD-1
Description : COMPLETE ASSY OF CD-1()
Specification : SK NO 2885
C
Estab
4) COMPLETE ASSEMBLY OF CD-2
Description : COMPLETE ASSEMBLY OF CD-2()
Specification : DRG.NO.DD(L)17429 DC.NO.37201-A
C
Estab
5) CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)
Description : CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)()
Specification : DRG.PT.NO.TX-18A
C
Estab
6) CONTAINER FOR CD-14,11 Lb MK-1 EMPTY
Description : CONTAINER FOR CD-14,11 Lb MK-1 EMPTY()
Specification : DRG.PT.NO.TX-18A
C
Estab
7) CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C
Description : CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C()
Specification : DRG.PT.NO.TX-18A
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) FORGING OF FIN BODY FOR 125MM HE
Description : FORGING OF FIN BODY FOR 125MM HE()
Specification : AL.ALLOY B-95 OF GOST-4784-74 OR ALTERNATIVELY DTD.5024 IN WP COND.TO OFDC DRG.NO.F-124 (e)
R
Estab
2) COMPLETE ASSY OF CD-1 IN FC
Description : COMPLETE ASSY OF CD-1 IN FC()
Specification : DRG.NO.SK--2885
C
Estab
3) COMPLETE ASSY OF CD-1
Description : COMPLETE ASSY OF CD-1()
Specification : SK NO 2885
C
Estab
4) COMPLETE ASSEMBLY OF CD-2
Description : COMPLETE ASSEMBLY OF CD-2()
Specification : DRG.NO.DD(L)17429 DC.NO.37201-A
C
Estab
5) CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)
Description : CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)()
Specification : DRG.PT.NO.TX-18A
C
Estab
6) CONTAINER FOR CD-14,11 Lb MK-1 EMPTY
Description : CONTAINER FOR CD-14,11 Lb MK-1 EMPTY()
Specification : DRG.PT.NO.TX-18A
C
Estab
7) CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C
Description : CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C()
Specification : DRG.PT.NO.TX-18A
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) FORGING OF FIN BODY FOR 125MM HE
Description : FORGING OF FIN BODY FOR 125MM HE()
Specification : AL.ALLOY B-95 OF GOST-4784-74 OR ALTERNATIVELY DTD.5024 IN WP COND.TO OFDC DRG.NO.F-124 (e)
R
Estab
2) COMPLETE ASSY OF CD-1 IN FC
Description : COMPLETE ASSY OF CD-1 IN FC()
Specification : DRG.NO.SK--2885
C
Estab
3) COMPLETE ASSY OF CD-1
Description : COMPLETE ASSY OF CD-1()
Specification : SK NO 2885
C
Estab
4) COMPLETE ASSEMBLY OF CD-2
Description : COMPLETE ASSEMBLY OF CD-2()
Specification : DRG.NO.DD(L)17429 DC.NO.37201-A
C
Estab
5) CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)
Description : CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)()
Specification : DRG.PT.NO.TX-18A
C
Estab
6) CONTAINER FOR CD-14,11 Lb MK-1 EMPTY
Description : CONTAINER FOR CD-14,11 Lb MK-1 EMPTY()
Specification : DRG.PT.NO.TX-18A
C
Estab
7) CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C
Description : CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C()
Specification : DRG.PT.NO.TX-18A
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) FORGING OF FIN BODY FOR 125MM HE
Description : FORGING OF FIN BODY FOR 125MM HE()
Specification : AL.ALLOY B-95 OF GOST-4784-74 OR ALTERNATIVELY DTD.5024 IN WP COND.TO OFDC DRG.NO.F-124 (e)
R
Estab
2) COMPLETE ASSY OF CD-1 IN FC
Description : COMPLETE ASSY OF CD-1 IN FC()
Specification : DRG.NO.SK--2885
C
Estab
3) COMPLETE ASSY OF CD-1
Description : COMPLETE ASSY OF CD-1()
Specification : SK NO 2885
C
Estab
4) COMPLETE ASSEMBLY OF CD-2
Description : COMPLETE ASSEMBLY OF CD-2()
Specification : DRG.NO.DD(L)17429 DC.NO.37201-A
C
Estab
5) CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)
Description : CONTAINER FOR CD-14, 11Lb,MK-1(EMPTY)()
Specification : DRG.PT.NO.TX-18A
C
Estab
6) CONTAINER FOR CD-14,11 Lb MK-1 EMPTY
Description : CONTAINER FOR CD-14,11 Lb MK-1 EMPTY()
Specification : DRG.PT.NO.TX-18A
C
Estab
7) CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C
Description : CONTAINER FOR CD-14,11 LB MK-1 (EMPTY) IN F.C()
Specification : DRG.PT.NO.TX-18A
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) FIN ASSEMBLY FOR 125 MM HE AMMUNITION[61]()
Specification : DRG. NO.4-024610 DET. NO.30
R
Nonestab
2) PRIMER ELECTRIC 1A/L (EMPTY )[63]()
Specification : DRG. NO. IQX- 46 GE
R
Estab
3) FUZE PERCN. DA NO. 117 MK-20 (EMPTY) WITH CAP[63]()
Specification : DRG. NO. QX - 244 GE
R
Estab
4) FUZE PERCN DA NO. 162 MK-8 (M-2) BRASS WITH CAP (EMPTY)[63]()
Specification : DRG. NO. IQX- 35 GE
R
Estab
5) SET OF COMPONENTS & ASSEMBLY FOR 155 MM SMOKE FFV 007 ER[64]()
Specification : AS PER DRG. & SPECN
R
Nonestab
6) SET OF PRIMARY EXPULSION CHARGE FOR SHELL 155MM SCREENING SMOKE BE M2A2[64]()
Specification : AS PER DRG. & SPECN
R
Nonestab
7) BAFFLE FOR SHELL 155 MM SCREENING SMOKE BE M2A2[64]()
Specification : DRG. NO. 2439A 22005
R
Nonestab
8) PIN SHEARING FOR SHELL 155 MM SCREENIBG SMOKE BE M2A2[64]()
Specification : DRG. NO. 2439A 00009
R
Nonestab
9) BODY LOWER FOR FUZE ISD FOR AGS-17 AMMN.[65]()
Specification : DRG. NO. ARDE 9102-00-03-00-01-001-00 DA
R
Nonestab
10) PRIMER PERCN. 18A/L (EMPTY)[63]()
Specification : DRG. NO. IQX- 51GE
R
Nonestab
11) PRF FOR 30 MM HE RUDRA GRENADE AGS-17 AMMN.D[65]()
2) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM[65]()
Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION
C
Nonestab
3) 6192250491 M.F.R.C. FOR RKT 68 MM HE/HC/PRACT.[61]()
Specification : METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141156252 HOUSING WITH PIN PT.DRG.NO.IQX85 SA[61]()
Specification : HOUSING WITH PIN
C
Nonestab
2) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
C
Nonestab
3) 6410900880 CUP FOR PRIMER GUV-7[64]()
Specification : DRG.NO.3-027321,
C
Nonestab
4) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
C
Nonestab
5) 6044000162 PRF 162A FOR BOMB 120MM MORTAR HE[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 TODC NO. 37393-A DT. 22-12-2015 FOR BOMB 120 MM MORTAR INERT, FUZED A, PLUGGED A TO DRG. PART NO. ITV 7 GA TO DC NO.37393-A DT. 22-12-2015.
C
Nonestab
6) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A
C
Nonestab
7) 6120900102 FIN ASSLY WITH BAND FOR 125MM HE 1A[61]()
Specification : FIN ASSEMBLY TO DRAWING NO.4-024610 DETAIL NO.30 DC 36892-A.DT.12/04/2003 FOR 125 MM HE AMMUNITION.
C
Nonestab
8) 6121000192 CUP TO PART NO. 2-10 FOR 125MM HEAT[61]()
Specification : CUP TO PART NO. 2-10 FOR 125MM HEAT
C
Nonestab
9) 6121000193 COVER TO PT.NO. 2-11 FOR 125MM HEAT[61]()
Specification : COVER TO PT.NO. 2-11 FOR 125MM HEAT
C
Nonestab
10) 6141156300 CAPSULE PT DRG NO IQX 514[61]()
Specification : CAPSULE (ALUMINIUM-STRIP/WIRE) TO DRG.PT.NO. IQX 514DC-36852-A DT.23.9.02.
C
Nonestab
11) 6141300140 CAP CHAMBER ZINC BASE ALLY[61]()
Specification : CHAMBER (ZINC BASE ALLOY) to design.ref. CIA/AMN/474
Part No. QX- 40 DC- 35853-A DT.22-11-94.
13) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()
Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL
C
Nonestab
14) 6192228146 DETONATOR HOLDER ARDE 1146 DET 21[61]()
Specification : DETONATOR HOLDER TO DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977 FOR ROCKET 68 MM HE.
C
Nonestab
15) 6192355925 MAGAZINE ARDE 1146 DET NO 27[61]()
Specification : MAGAZINE TO DRG. NO. ARDE-1146 DETAIL NO.27 AL. NO.312 DT.13.9.77 FOR ROCKET 68 MM HE.
C
Nonestab
16) 6261102300 ADAPTER DRG PT SX 701 FOR 105MM TKS[62]()
Specification : ADAPTER TO DRG PT NO SX-701 DC 35779-A
C
Nonestab
17) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]()
Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM.
C
Nonestab
18) 6273200062 PRF FOR SHELL 155MM ERFB BB[62]()
Specification : PRF FOR SHELL 155MM ERFB (BB/BT)/NASCHEM TO DRG. NO.PROJ/155/NASCHEM/085
C
Nonestab
19) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT[63]()
Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04
C
Nonestab
20) 6330301100 DETONATOR HOLDER FOR SHAPED CHARGE 30MM[63]()
Specification : DETONATOR HOLDER TO DRG. NO. HE/CAST 012 DET 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.
C
Nonestab
21) 6330604400 HOLDER DELAY FOR FZ B429[63]()
Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429
C
Nonestab
22) 6330604970 PLUG REPRESENTING FUZE B429[63]()
Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.
C
Nonestab
23) 6331451300 DETONATOR HOLDER FOR CHARGE 145 MM[63]()
Specification : DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.
C
Nonestab
24) 6331800294 SLEEVE B FOR FUZE 162 MK 8[63]()
Specification : SLEEVE "B" TO DRAWING NUMBER PROP/SK-294 FOR PACKING OF FUZE162 MK-8 AND MK-9.
C
Nonestab
25) 6410900120 COVER OF OBTURATOR DET 10[64]()
Specification : COVER OF OBTURATOR TO DRG.NO.3-027321 DET.NO.10 DC-36050-ADT.5/12/95 FOR PRIMER GUV-7.
C
Nonestab
26) 6419000027 PRIMER GUV 7 E COMPLETE FOR 125MM[64]()
Specification : EMPTY COMPONENTS OF PRIMER GUV-7, CONSISTING OF BODY TO DRGNO. 3-027321 DET 5, CUP DET 7, OBTURATOR DET 8, COVER OFOBTURATOR DET 10, CLAMPING BUSH DET 15, PACKING RING DET 6,CLAMPING NUT & BASE ASSLY DET CD4 AND OBTURATING DEVICE C
C
Nonestab
27) 6432100001 STEEL CUP WITH SEAL ARDE 2120 120 ARJUN[64]()
Specification : CQA(A) 5709
C
Nonestab
28) 6432200002 STL CUP WITH SEAL HESH 120MM ARJUN[64]()
Specification : STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.
C
Nonestab
29) 6432200102 STL CUP WITH SEAL HESH 120MM ARJUN[64]()
Specification : STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING[90]()
Specification : SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SUB ASSEMBLIES & COMPONENTS OF 81 MM MORTAR[90]()
Specification : SUB ASSEMBLIES & COMPONENTS OF 81 MM MORTAR
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SEMI MACHINED BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H AND PERIPHERAL GRAIN GROWTH 1MM MAX ON RADIUS[63]()
Specification : SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A TO DESIGNER'S REF.ARDE-1933 DETAIL NO. 2 PART NO.ITV-17 SA SHT 1&2 SPECN CQA(A)- 2322()
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
R
Estab
6) BASE PLUG DES REF NO CIA AMN 1799 DET NO 4 PT NO ITW 66 SPECN CQA A 1504()
Specification : CQA(A) 1504
R
Estab
7) MINE DRILL APM 16 A BODY ASSLY()
Specification : IA 1246(f) DC 31463 A
R
Estab
8) SPOOL ASSY IA-190 SHT CIA 1804 (B)()
Specification : CQA(A) 1804
R
Estab
9) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804()
Specification : CQA(A)1804
R
Estab
10) FUZE MINE COMB.M605 ASSEMBLY EMPTY()
Specification : CQA(A) 1803
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) FORGING OF FIN BODY FOR 125MM HE
Description : FORGING OF FIN BODY FOR 125MM HE()
Specification : AL.ALLOY B-95 OF GOST-4784-74 OR ALTERNATIVELY DTD.5024 IN WP COND.TO OFDC DRG.NO.F-124 (e)
C
Estab
2) COMPLETE ASSY OF CD-1 IN FC
Description : COMPLETE ASSY OF CD-1 IN FC()
Specification : 152.4 MM MK 5/L PART NO. ITX-15GE DC 36642-A
C
Estab
3) COMPLETE ASSEMBLY OF CD-2
Description : COMPLETE ASSEMBLY OF CD-2()
1) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]()
Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A
C
Nonestab
2) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM[65]()
Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS
1.BODY DET. NO. 010
2. COVER DET.NO. 020
3.BOLT DET. NO. 030
4. FORK DET.NO 005
C
Nonestab
3) 6432420001 LEG ASSY DRG ITX 46 SA[64]()
Specification : LEG ASSEMBLY TO DESIGNER'S REF. NO. ARDE-1521, DRG.PART NO. ITX-46 SA DC NO. 35824-A.
C
Nonestab
4) 6432800004 COPPER CUP TORPEDO I C[64]()
Specification : CUP (MATERIAL- COPPER SHEET) TO DRG. NO. NASK 754/4 (PROV.) FOR ASSEMBLY OF CARTG. TORPEDO IMPULSE.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Estab
2) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
C
Nonestab
3) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
4) 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7[63]()
Specification : STRIKER MECHANISM DRG.NO.3-016919,53-B-025Y,CD-7,DC-34920-A DT.23-7-90 EXCEPT SUB ASSEMBLY CD-6 AND ITEM DETAIL 53 FOR FUZE B 429E/B 429.
C
Estab
5) 6191700029 VT HOLDER MOD FOR PINAKA RKT[61]()
Specification : VT HOLDER MODIFIED FOR PINAKA ROCKET SYSTEM TO ARDE DRAWING NO. 8603 03 99 00 02 001 00DA
C
Nonestab
6) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]()
Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) DISTANCE TUBE TO DRG NO F 1301 047281 D IN FC WITHOUT SURFACE TREATMENT[62]()
1) Wooden Packing Crate for 100/120 Kg Aerial Bombs()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) PACKING BOXES & DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) WOODEN REELS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
2) PLYWOOD REELS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
3) WOODEN CABLE DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
4) PLYWOOD BOXES & DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]()
Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO. ISV 587 A, DC.37127-A DT.30.07.07.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BOX UNIT LOAD FOR 155 MM SHELL M107 1465000220[14]()
Specification : DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE()
OFN/BMCS/M-92/WOODEN CRATE
C
Estab.
Category : DDP
Grade : II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21]()
Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SISSO HARD WOOD ( NON CONIFEROUS) SCANTLING GR.-I. SIZE-45 MM SQUARE X 1.5 METRS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) CRATE WOOD PACKING SIZE (INTERNAL) 74 CMX 66 CM X 64 CM. FOR SADDLE PA UNIVERSAL[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CASE WOOD PACKING INT. SIZE 30 CM X 30 CM X 30 CM[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) CASE WOOD PACKING INTERNAL SIZE 45 CM X 30 CM X 30 CM .[21]()
Specification : IS :1503 -1974 STYLE 3 (b)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CASE WOOD PACKING SIZE 381X228X304MM[21]()
Specification : IND/GS/515(f)(3255/PK)
R
Estab
2) CRATE WOOD PACKING CLASS 'A' STYLE 6. SIZE- 6.60 CM X 6.60 CM X 3.30 CM.[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD (CONIFEROUS) SLEEPER GR. I SPECIES CHIR/FIR SIZE 125MM X 200MM & UP X 2.44 MTR. & [21]()
Specification : IS: 190-1974 III REVISIOV & SUPP. SHUDULE CQA/SS/309
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 62 CM.HX 54.5 CM L X 54.5 CM W AS PER OEF DRG. NO. SK-1166 & IS:3071-1981 CLASS[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
2) CRATE WOOD STYLE NO.5 CLASS B INTERNAL SIZE 50 CM WIDTH X 60 CM LENGTH X 57.50 CM HEIGHT.[21]()
Specification : SPECN.NO. IS:3071-1981
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21]()
Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFT WOOD PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS [21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) WOODEN CRATE/CRATE WOOD PACKING VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
3) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 6584113903 PACKING BOX WOODEN[65]()
Specification : PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2
C
Nonestab
3) 2270528358 PLY WOOD 8 MM[22]()
Specification : IS: 303-1989
R
Nonestab
4) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()
Specification : IND/ME/883 (F) (PROV)
R
Nonestab
5) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()
Specification : IND/ME/883(F)(PROV)
R
Estab
6) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
7) 2255406390 TIMBER N C SIZE[22]()
Specification : IND/ME/883(F)(PROV)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()
Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.
R
Nonestab
2) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
3) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270441000 PLY WOOD 3 MM CWR[22]()
Specification : PLYWOOD FOR GENERAL PURPOSES MR GRADE TYPE AB SIZE 2.40 M X 1.20 M X 3 MM THICK (3 PLY) TO SPECN. IS: 303-1989, THIRD REV., AMDT. 2, REAFFIRMED 1998
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270353012 PLY WOOD 3 MM BWR BB[22]()
Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY
R
Nonestab
2) 2270460637 PLY WOOD 12 MM MR AA[22]()
Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY.
R
Nonestab
3) 2255058168 TIMBER MANGO[22]()
Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.
CRATE WOOD 12-A TO DRG.PT.NO. ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948 (a,k) DC (I) 36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
3) CATCH LOCK ASSY DRG NO. IA-1053 4 CO (9911358061)()
CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
C
NOT ESTABLISHED
4) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
AMMUNITION CONTAINER CARRIER-4A/L (STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169 (n) DC NO.35576-A, AIDE MEMOIRE P/11. AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPEC
AMMN. CONTAINER BOX C 55A (PLYWOOD) FOR AMMN. CONT. ASSY.173A TO DRG.PART NO. ISV 626A DC 37283-A DT. 30/6/2011 REFER WITH DRG.PART NO. ISV.557 GA. DC 37283-A DT 30/6/2011
BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948 (ak) DC-36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BOX COMPLETE ROUND PART NO 522282 LF 9911358479
Description : BOX COMPLETE ROUND PART NO 522282 LF 9911358479()
Specification : BOX COMPLETE/ROUND PART NO.5227282.
E
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.-O.F.KHAMARIA[99]()
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
2) WOODEN BOX FOR BPC 4W 20[65]()
Specification : WOODEN BOX FOR PROP BPC (4W-20) AS PER DRAWING ATTACHED SPECIFICATION –DRG.NO.-NAI(J) 245
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX F2A L F 9911356419
Description : AMMUNITION CONTAINER BOX F2A L F 9911356419()
Specification : AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALP
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]()
Specification : DRG.NO. 155-1210
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C
Description : Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C()
Specification : Wooden Packing Box for Propulsion Unit as per Drg. No. FS-2436 C
R
Estab
2) Wooden Packing Box for Warhead as per Drg No FS 2435 C
Description : Wooden Packing Box for Warhead as per Drg No FS 2435 C()
Specification : Wooden Packing Box for Warhead as per Drg. No. FS-2435 C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) PACKING BOX SPTA FOR TPDK1 LF 9927075323[99]()
Specification : PACKING BOX (SPTA) TO DRG NO. T01/MA/4.162.236/14M2.
C
Nonestab
2) PACKING BOX LF 9927075325[99]()
Specification : PACKING BOX TO DRG NO.B-23/MA/4267018/12 M3
Specification : CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Wooden Chest for LMG[14]()
Specification : WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CHEST FOR 9 MM CARBINE[14]()
Specification : AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN CHEST MG2B FOR MAG[70]()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
303
SUNTOOLS
3, NASKAR PARA BYE LANE NASKAR PARA BYE LANE HOWRAH West Bengal
PIN1 : 700104
Phone No. : 26694243
GSTIN : 19AAHFM4680R1ZD
Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX
SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
2) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX.
SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT
R
Estab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) Multi Spectral camouflage Equipment to Art No 1155287D[90]()
Specification : MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D
COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m
(OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m
(OUTSIDE DESERT PRINTED),Q
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PU Coated Nylon Fabric in Camouflage Design 150 cm Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
2) Camouflage Cloth Commercial Polyester 600 D PVC / PU Coated 150 CM Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]()
Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
R
Estab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081008426 HEATING BLANKET FOR DHANUSH TO DOCUMENT NO GCF 50 41169[90]()
Specification : HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.
C
Nonestab
Category :
Grade : Grade III
Size :
M
309
S R Industries
2-131/1,Shobana Colony Road No:4 Hyderabad Telangana
PIN1 : 500042
Phone No. : 23779282
GSTIN : 36AFQPG9485A1Z5
1) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) Magazine Assembly with Steel Insert 30RD[79]()
Specification : Magazine Assembly with Steel Insert for 5.56x45MM 30RD To Drg. No. RFI SK. 10019 for 5.56MM Assault Rifle
Specification : MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC)
TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fi
C
Estab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE ASSEMBLY TO DRG.NO.AR/024-RFI. FOR ASSAULT RIFLE 7.62MM.(GHAATAK).(TRADE FINISH). CONSISTING OF:- I)AR/023/2/2. II)AR/024/01-RFI. III)AR/024/02-RFI. IV)AR/024/03-RFI & V)AR/024/04-RFI[70]()
Specification : MAGAZINE ASSEMBLY TO DRG.NO.AR/024-RFI. FOR ASSAULT RIFLE 7.62MM.(GHAATAK).(TRADE FINISH). CONSISTING OF:- I)AR/023/2/2. II)AR/024/01-RFI. III)AR/024/02-RFI. IV)AR/024/03-RFI & V)AR/024/04-RFI
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
3) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
4) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
5) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
6) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
2) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]()
Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D S CAT NO 5305 018183 D C NO 25762 SA DT 10 6 03 REQUIRED IN WHITE FINISHED CONDITION WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO K 4011 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]()
Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COVER FOR FIRING MECHANISM TO DRG. NO. 30P 3038[70]()
Specification : AS PER DRG OF COVER FOR FIRING MECHANISM TO DRG. NO. 30P 3038
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SCREW PISTOL GRIP TO D S CAT NO 5305 005004 ICR 1380 TO LATEST D C No 24275 SA DATED 26 02 1999 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
2) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
3) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
4) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
5) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]()
Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL
C
Nonestab
6) SUPPLY OF TRIGGER TO DS CAT NO 1005 001690 ICR 1238 DC NO 27044 SA DT 23 03 2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : SUPPLY OF TRIGGER TO DS CAT NO 1005-001690 (ICR 1238) DC NO 27044-SA DT. 23.03.2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED
R
Nonestab
7) Manufature and supply of BUTT NORMAL ASSEMBLY POLYMER AS PER DRG NO 27P 660 02 FOR RIFLE 7 62MM 1A1[82]()
Specification : Manufature and supply of BUTT NORMAL ASSEMBLY (POLYMER) AS PER DRG. NO. 27P 660-02.FOR RIFLE 7.62MM 1A1
E
Nonestab
8) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
9) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
10) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Grip Pistol Assembly as per drawing No 27P 6500[70]()
Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
313
KIRTI TRADERS
235 - 236, MAJESTIC SHOPPING CENTRE, 2ND FLOOR 144, J. S. S. ROAD, CHARNI ROAD MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23808568
GSTIN : 27AAAPC7734R2ZA
2) CLOTH COTTON CANVAS 410 GMS. KHAKI 91 CM.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1424-1983 VARIETY NO.4 duly flame proofed
R
Estab
3) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1
R
Estab
4) CLOTH COTTON DOSSUTI BLUE 91 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 179-1977 VARIETY NO. 4
R
Estab
5) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CMS. WIDE[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95
R
Estab
2) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : As per requirement & specification
R
Estab
3) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:1422-1983 V. NO. 3 WATER PROOFNESS TO IS:6803 LATEST
R
Estab
4) CLOTH COTTON O.G. W.R. 375 GMS. FOR CAPES 76 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422 & MODIFICATION AS PER ANNEX. "A"
R
Estab
5) CLOTH DUCK COTTON 340 GMS O.G. WP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983 (V.NO.4) AND WATER PROOFNESS TO IS: 6803-1972
R
Estab
6) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT
R
Estab
7) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1)
R
Estab
8) CLOTH DUCK COTTON 475 O.G W.P. AND RP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
9) CLOTH DUCK COTTON 610 GMS KHAKI W.P. 91 CM[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422:1983 V.NO. 2
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CLOTH CALICO COTTON WHITE 91 CMS[21]()
Specification : IS:5088-1982(V.NO.3)
R
Estab
2) CLOTH CALICO COTTON KHAKI 91 CM.[21]()
Specification : IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3
1) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
3) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
7) Wet Blue for Lining Leather[21]()
Specification : QA/L/WET BLUE/BUFF(Lining) date 19.05.2009
R
Nonestab
8) EYELETTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
9) EYELETTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
10) EYELETTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
11) Eyeletted Closed Upper with stiffner for Derby Shoe in various sizes[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
12) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
13) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZE[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
14) EYELETTING OF CLOSED UPPERS[21]()
Specification : IND/TC/3844
R
Nonestab
15) LASTED CLOSED UPPER FOR BOOT NAVY IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
16) LASTED CLOSED UPPER FOR SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
Category : P
Grade : II
Size :
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
1) RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar[2103679554]()
Specification : ADRDE/540-A-5(a) AND ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar[2103679554]()
Specification : ADRDE/540-A-5(a) AND ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar[2103679554]()
Specification : ADRDE/540-A-5(a) AND ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALL INSERT FRONT & REAR (9911339844)()
BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:- F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:- F1301-902230-C (CQA-4904) DC(I) 33419-A (NEOPRENE) RUBBER S
C
NOT ESTABLISHED
2) O RING 68.6X2.2MM F1301-024240-B (2013200384)()
O RING GASKET DIA 68.6+/-0.4 X 2.2+/-0.1 MM DIA TO DRG NO. F-1301-024240-B DC NO. 36345-A DT 29/10/97 MATERIAL SPECN:- IND/ME/884:2015
C
NOT ESTABLISHED
3) O RING 61X2 DRG NO. F1301-055320C (2058130003)()
O RING DIA 61X2 TO DRG NO. F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL- TABLE F1301-903210C DT 15/12/77
C
NOT ESTABLISHED
4) RUBBER HOOD F1301-078691-C (2058130002)()
RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BS RUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT. 01/02/2016
C
NOT ESTABLISHED
5) O RING 74.2X5.7MM TRD-845 (6170444630)()
O RING 74.2 X 5.7 TO DRG NO. TRD-845 a
C
NOT ESTABLISHED
6) PLUG LAUNCHER PED 902-01-401 (9911356473)()
PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401 DC-17988-W DT. 20/06/1994. MATERIAL: ACRYLO NITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914 (PROV) DC-3496-ME DT. 06/02/98 GRADE C OR D HARDNESS 55 TO 70
C
NOT ESTABLISHED
7) SET CONSITING OF 3 RUBBER COMPONENT (9911356367)()
SET CONSIST OF 3 COMPT. 1 ) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01
C
NOT ESTABLISHED
Category : P
Grade : II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CHAFF PAY LOAD FOR MRCR[61]()
Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10
C
Nonestab
2) CHAFF PAY LOAD FOR LRCR[61]()
Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CHAFF PAY LOAD FOR SRCR[61]()
Specification : AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD -AI/4141 DT.5.5.10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) GASKET RUBBER FOR BOX H2A[99]()
Specification : GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) GASKET RUBBER FOR BOX H2A[99]()
Specification : GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) ALL TYPES OF RUBBER GASKETS FOR AMMN. BOXES - BOX H2A & BOX H5A[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION
R
Nonestab
2) ALL TYPES OF RUBBER ITEMS AS PER DRAWING[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) ALL TYPES OF RUBBER ITEMS AS PER DRAWING[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
