2) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]()
Specification : SPECN. NO. CQA(A) 0917
C
Nonestab
3) 6044000600 TAIL UNIT 2A[60]()
Specification : SPECN NO. CQA(A)2342
C
Nonestab
4) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]()
Specification : SPECN.NO. CQA(A) 0917
C
Nonestab
5) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
C
Nonestab
6) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) CATCH MAGAZINE FOR RIFLE 5.56MM INSAS.()
AS PER DRAWING
C
Not Estab.
2) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPONENT)()
AS PER DRAWING
C
Non Established
3) MACHINED BODY FOR 5.56MM ASSAULT RIFLE.()
AS PER DRAWING.
C
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP (EMPTY) FOR DEONATOR 356 MG[64]()
Specification : CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SEPARATOR OF POLY FOAM(278X190X6)MM MATERIAL:EXPANDED POLYSTYRENE FOAM HAVING AVERAGE 18-25 KG[65]()
Specification : SEPARATOR OF POLY FOAM(278X190X6)MM MATERIAL:EXPANDED POLYSTYRENE FOAM HAVING AVERAGE 18-25 KG/ CUBIC METRE TO SPECN.IS:4671-1984(IST REV.TYPE-2) (REF.DRG.NO.ARDE 2174 PARTNO.ISV 514 GA, DC NO.36017 A,DTD. 28.10.95)
C
Nonestab
2) DISC FOR FUZE 162 MARK-8 & DA5A TO CQA[63]()
Specification : DISC FOR FUZE 162 MARK-8 & DA5A TO CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018.DC-36449-A Dt.30-07-98.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP 4A 5 FOR A30 T DET[65]()
Specification : CUP 4A-5 FOR A30-T(DET) TO DRG NO. FOR PRIMER DETONATOR A-30-T CQA(A)/AMMN/2856, DC NO-37271.A DT. 08.11.10
C
Nonestab
2) CAP KG 4 FOR A30 T DETONATOR[65]()
Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SELF TAPPING SCREW DRG 121932 LF NO 9911357650
Description : SELF TAPPING SCREW DRG 121932 LF NO 9911357650()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER SPRING TBRL LF NO 9911358297
Description : SHUTTER SPRING TBRL LF NO 9911358297()
Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300
Description : SHUTTER PLATE TBRL LF NO 9911358300()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524
Description : 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524()
Specification : 1ST SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.1.Rivet for Top Plate (Qty.-2 NOS.) TBRL/MMG-H/MK-1/016/R0 2.Plunger Spring TBRL/MMG-H/MK-1/029/F0 3.Conical spring (Qty-2nos) TBRL/MMG-H/MK-1/030/R0 4.Safety Pin, TRD-1-1-3047
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529
Description : 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321
Description : SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526
Description : 3rd SET OF 4 ITEMS FOR MMHG 9911358526()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385
Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
Specification : SPECN. NO. CQA(A)2352 (d) DRG. NO. CQA(A)/AMN/2935, DET NO. 2 PT. NO. ITV- 274
C
Nonestab
10) MAIN PARA.HOUSING FOR 120MM ILLG.[63]()
Specification : DRG.NO. ARDE 2011 DET NO. 19 PARTNO. ITV 149 DC (I) 34732 - A DATED 30-09-1989 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b) DC NO.36952-A DT.16-03-04.
C
Nonestab
11) COLLAR FOR 120MM ILLG.[63]()
Specification : DRG.NO.ARDE 2011 DET 8 PT NO.ITV - 158 DC (I)36931 (A) DT.14.11.03. MATERIAL SPECN.IS 1570C-20 SPECN.NO.CQA (A) 2321 (b) DC-36952 A dt.16/3/04.
C
Nonestab
12) TUBE FOR HAND FLARE [64]()
Specification : DRG.NO. OFDR/CT/1/11/A3.
C
Nonestab
13) SET OF 8 COMPONENTS FOR SHELL 105MM SMOKE[62]()
Specification : DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98)
C
Nonestab
4) SPRING HOLDER FOR 81MM ILLG. MK-II [62]()
Specification : DRG. NO. ARDE 2222 DET 7 PT NO ITV 258 SPECN: NO. CQA(A) 2345(C)
C
Nonestab
5) BOTTOM SAFETY COVER PARA FLARE RED[62]()
Specification : DRG NO.OFDR/CT/41/M/UI/A-3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF SPRINGS COMPRISING OF MAIN SPRING AND AUXILARY SPRINGS TO DRG NO ARDE 2222 PART NO ITV 259 AND ITV 260[62]()
Specification : MAIN SPRING AND AUXILARY SPRINGS TO DRG NO ARDE 2222 PART NO ITV 259 AND ITV 260
C
Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER
C
Nonestab
3) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]()
Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF SPRINGS COMPRISING OF MAIN SPRING AND AUXILARY SPRINGS TO DRG NO ARDE 2222 PART NO ITV 259 AND ITV 260[62]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SQUIB FOR SIGNAL FLARE [99]()
Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO
C
Nonestab
2) CLOSING CUP FOR 120 MM ILLG.[99]()
Specification : DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT. 06-12-89. TOTAL THICKNESS TO BE 18.0 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) DISC INDEX FOR 16 MM WHITE[60]()
Specification : DRG NO ARDE 1878 DET NO. 9 PT NO IQW
C
Nonestab
2) DISC INDEX FOR 16 MM RED[60]()
Specification : DRG NO ARDE 1878 DET NO 7 PT NO IQW 201 DC 35720A DT. 31/5/94
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]()
Specification : DRG. NO. 2440A13003 DC-36552-A
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1[63]()
Specification : DRG NO. 2440A03062
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]()
Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) A SET OF LID, BOOSTER TUBE, CASE RING[62]()
Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1[63]()
Specification : DRG NO. 2440A03062
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE FOR CARTRIDGE CASE 16MM RED AIR FORCE[60]()
Specification : CASE TO DRAWING NO.ARDE-2037 (REV.1) DET NO.2 DTD.06/09/2017 TO SPECN. ARDE/SPECN/130(a)- REVISION 1 DTD.08/06/2017.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG.[63]()
Specification : DRG. NO. 2440A20008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF EIGHT NOS EMPTY COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A / IFG COLOUR SMOKE BE 3A[62]()
Specification : CQA(A) 2346(c)
C
Nonestab
2) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]()
Specification : CQA(A) 4928
C
Nonestab
3) SET OF 5 COMPONENTS UPPER SET OF 51MM ILLG. CONSISTING OF (I) BASE PLATE (II) COLLAR (III) EYE BOLT [62]()
Specification : DRG. NO. ARDE-2064
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]()
Specification : IS 5517-1993
C
Nonestab
2) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG M1A1[63]()
Specification : DRG NO. 2440A20008
C
Nonestab
3) PIN IMBALANCE FOR SHELL 155 MM ILLG M1A1[63]()
Specification : DRG NO. 2439A00015
C
Nonestab
4) PIN FOR SHELL 155 MM ILLG M1A1[63]()
Specification : DRG NO. 2440803007
C
Nonestab
5) Obturator for Shell 155mm Illg M1A1[63]()
Specification : [DRG. NO. 155-1140]
C
Nonestab
6) Scuff Protector for Shell 155mm Illg M1A1[63]()
Specification : [DRG. NO. 155-1110]
C
Nonestab
7) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1[63]()
Specification : DRG. NO. 155-1120
C
Nonestab
8) Pin shearing for Shell 155mm Illg. M1A1[63]()
Specification : Drg. No. 2439A00009
C
Nonestab
9) Pin spring for Shell 155mm Illg. M1A1[63]()
Specification : Drg. No. 2440A03028
C
Nonestab
10) SUPPORT PARACHUTE (SET OF 4) FOR SHELL 155MM ILLG.[63]()
Specification : DRG. NO. 2440A20012
C
Nonestab
11) SET OF HOLDER PRIMARY CHARGE & ADAPTER PRIMARY CHARGE FOR SHELL 155MM ILLG. M1A1[63]()
Specification : DRG. NO. 2439A22010 & 2439A22011
C
Estab
12) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]()
Specification : DRG. NO. 2440A13003 DC-36552-A
C
Nonestab
13) SPACER[63]()
Specification : SPACER TO DRG.NO. 2439A00016 DC 36552A DATED 24.4.99.MATL ACRYLONITRILE BUTADIENE RUBBER COMPOUND GRADE "D" [TO SPECN.NO.IND/ME/914(PROV). DC 3496ME DTD. 6/2/98.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Cup Securing Cart. For Pyro (India) Para Flare Red [61]()
Specification : SPECN. IS:1570C 40 DRG. NO. ARDE 2011, DET 24 PART NO. ITV-152
C
Nonestab
5) SAFETY PIN ASSEMBLY, DRG.NO.2024/28[62]()
Specification : DRG.NO.ARDE 2024 DET NO 28 DRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2 AND MULTITOOTH LOCK WASHER B6-4 IS : 5371-1982 SPRING STEEL.
C
Nonestab
6) A SET OF LID, BOOSTER TUBE, CASE RING[62]()
Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Nonestab
7) MAIN SPRING FOR 120MM ILLG.[63]()
Specification : DRG.NO.ARDE 2011, DET 27 PT.NO.ITV-139 SPECN NO.CQA (A)2321(b)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) TAIL UNIT 2A FOR MORTAR BOMB 120 MM ILLG.[63]()
Specification : CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A
Specification : DRG NO. OFDR/CT/1/M1/A3 AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN.NO. DGOF/OFDR/008.
C
Nonestab
5) SAFETY PIN ASSEMBLY, DRG.NO.2024/28[62]()
Specification : DRG.NO.ARDE 2024 DET NO 28 DRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2 AND MULTITOOTH LOCK WASHER B6-4 IS : 5371-1982 SPRING STEEL.
C
Nonestab
6) STRIKER SPRING FOR BUOYANT SMK[62]()
Specification : DRG NO.OFDR/CT/14/M1/A3 TO SPECN.NO. DGOF/OFDR/008.
Specification : DRG NO OFDR/CT/8/M1/A3 TO SPECN.NO.DGOF/OFDR/008.
C
Nonestab
12) NUT FOR 3KG BOMB PRACTICE [62]()
Specification : DRG.NO.ARDE 2024/DET NO.16
C
Nonestab
13) NOSE ASSEMBLY FOR BOMB PRACTICE 3 KG[62]()
Specification : DRG.NO.ARDE 2024/DET.1 CONSISTING OF : (1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5 (5)MULTI-TOOTH LOCK
C
Nonestab
14) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]()
Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
C
Nonestab
15) WASHER STAR 32.512 MM 1-1/2 R/G/Y[99]()
Specification : WASHER STAR SIZE 32.512 MM OD X 9.525 MM ID X 0.508 MM THICK TO DRG.NO. ARM 1463 A 7.
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.[62]()
Specification : SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG M1A1[63]()
Specification : ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PRO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]()
Specification : DRG.NO. 155-1210
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SUPPORT DRAUGH PARACHUTE FOR SHELL 155 mm Illg[63]()
11) PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.[65]()
Specification : DRG. NO. OFDR/PACKING/84MM/74
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
2) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CAP AND LOCK BOTTOM F1301 905060 P 2013998518
Description : CAP AND LOCK BOTTOM F1301 905060 P 2013998518()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) LOWER SET FOR MORTAR BOMB 51MM ILLG()
CQA 2328(A) & CQA 2332
C
Estab
2) FUZE DA NO. 213 T&P MK-5(M2) FOR SHELL 105 MM ILLG / BE SMOKE / COLOUR SMOKE ()
SPECN. NO. L-9974-F(L) DRG. NO. CIA/AMN/1783 PART NO. IQX53GE
C
Non Established
3) FUZE DA NO. 213 T&P MK-5(M3) FOR M.B. 81MM ILLG.2A ()
L-9974F(L) DRG. NO. ARDE 1967 PART NO. IQX-67GE
C
Non Established
4) TUBE FOR PYRO (INDIA) FOR HAND FLARE RED()
DGOF/OFDR/004 DRG. NO. OFDR/CT/1/11/A3
C
Non Established
5) DELAY CASING EMPTY FOR 14.5MM 3&6 SEC.()
DRG. NO. 04-749-130226-02. 1E DC 36736 A SPECN. 04-749-0021-0008
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
R
Nonestab
8) SEALING RING PART NO 6413249 LF 9911358408[99]()
Specification : SEALING RING PART NO.6413249 TO OEM DRG.NO.304101502/ TRD.DRG.NO 1.2.2420
R
Nonestab
9) BOOSTER CUP PART NO 4102996 LF 9911358399[99]()
Specification : BOOSTER CUP PART NO.4102996 TO OEM DRG.NO.304075972/ TRD.DRG.NO. 3.2.2552
R
Nonestab
10) COVER PART NO 6429713 LF 9911358447[99]()
Specification : COVER PART NO.6429713 TO OEM DRG.NO.304061235/TRD.DRG.NO. 1.2.2758
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) Rolling Ring Assy for 500Kg GP LF 9911358586[99]()
Specification : Rolling Ring Assembly for 500Kg GP Bomb
C
Nonestab
2) SET OF CONTAINER 3YAK22 AND PALLET 3YAK LF 9911358583[99]()
Specification : SET OF CONTAINER 3YAK22 & COLLAPSIBLE 3YAK23. ONE SET CONSIST OF 20 NUMBER OF CONTAINER 3YAK22 & 1 NUMBER OF COLLAPSIBLE PALLET 3YAK23
E
Nonestab
3) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
4) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AFT CLOSURE TO DRG NO 4101894 lf 9911358233[99]()
Specification : AFT CLOSURE TO DRG.NO.4101894.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Debarred
Name
Specification
Use
Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
C
Nonestab
2) SEALING RING TO DRG NO TRD 1 2 2246 LF 9911357874[99]()
Specification : SEALING RING TO DRG.NO.TRD-1-2-2246.
C
Estab
3) CARRIER 12A ISV 470A ASY B FOR TPT LF 6573800100[65]()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
5) PRIMER GASKET F1301 036530 D LF 2013436143[20]()
Specification : PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
C
Nonestab
6) CARTG CLIP FOR 76 62 SRGM LF 9911357314[99]()
Specification : CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992.
R
Nonestab
7) O RING GASKET TO DRG NO F1321 43178 LF 9911358206[99]()
Specification : O-RING GASKET TO DRG.NO.F1321-431780C.
R
Nonestab
8) CONTAINER P 17C DRG NO ARDE 1892 LF 9911358229[99]()
Specification : CONTAINER P-17C TO DRAWING NO.-ARDE 1892 R.NO.1 DT.20-11-95.(1)CONTAINER P-17C(EMPTY ASSY)-ARDE/1910/1 R.NO.2 DT.30-7-97(2)SLEEVE - ARDE/1892/1 (3).DISC - ARDE/1892/2(4)WASHER - ARDE/1892/3(5)PIECE PACKING TOP - ARDE/1892/4 (6).LABLE - AR
R
Nonestab
9) LUG 500 FOR 250KG PRE FRAG BOMB LF 9911358321[99]()
Specification : LUG 500 TO ARDE DRAWING NO. ARDE 2143 & SPECIFICATION TO ARDE/SPEC/438 FOR 250 KG PRE-FRAG BOMB.
R
Nonestab
10) PHENOLIC MOULDING OF BODY CONTACT LF 9911356304[99]()
Specification : PHENOLIC MOULDING FOR BODY & CONTACT TO DRG NO:OST-B84-410- 78 MOULDED COMPONENTS TO SATISFY PARAMETER OF TESTING ATSHEET NO: 4,5 & 6 OF OST-B84-410:78 MOULDING MATERIAL TOSPECN:- SP-16 OF IPL.
R
Nonestab
11) CARTG CASE HALF TOLERANCE 30MM BMP LF 9911358268[99]()
Specification : CARTG. CASE (HALF TOLERANCE) FOR 30MM BMP-II GUN 2A42,EMPTY TO DRG NO 3-0105575 SHEET 1 to 4 DC-36579A DT.3-8-99 TO SPECN:PROGRAMMEAND PROCEDURE OF TESTING BY FIRING GUN 2 A42 AS PER SHEET NO3-0105575-0514 -- M3(2SHEETS) DC-34183-A DT.28-
R
Nonestab
12) PRF FOR CARTG AK 100 MM PRACTICE LF 9911357898[99]()
Specification : PRF FOR CTGE AK-100 MM PRACTICE TO DRG.NAI (J) 850/1. (PROV.) DT.19/11/2010.
2) Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443[99]()
Specification : OEM DRG No 301177898 / TRD DRG No 2 2 2738
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) VALVE DRG NO.5209565 FOR 84HEAT-551[99]()
Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SAFETY SPRING TO TRD DRG NO.(551)[99]()
Specification : SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]()
Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.
C
Nonestab
2) MOULDING OF PRIMER BODY and CONTACT LF 9911349627[99]()
Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
2) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354[99]()
Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) FUZE PDM 572 LF 9911357185[99]()
Specification : FUZE PDM-572 EMPTY COMPLETE COMPRISING OF(1)FUZE PDM-48A3 MODIF.ASSEMBLY LOADING TO DRG NO.15108-0-0 DC NO.347O9-A DT. 9-9-89 (2)BOOSTER SUB ASSY BOOSTER WITH SETBACK MECHN.TO DRG.NO.13O21-0-0 DC.35218-A DATED 13-11-91.
C
Nonestab
2) SCREW TO DRG PT NO QX 1761 LF 4213998077[42]()
Specification : SCREW TO DRG. PT. NO. QX-1761 DC-35465-A.
R
Nonestab
3) SCREW LF 9911332797[99]()
Specification : SCREW TO DRG.PT.NO. QX-1760 DC(I) 35465-A.
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF 8COMP.FOR DELAY UNIT OF 551[99]()
Specification : SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO.TRD-2-2-2226 OF84MM HEAT-551.1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER7) DISC (8) "O"RING 8.1 X 1.6.DRG NO. AS PER ATTACHED LIST.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PLUNGER BLANK FOR 84 HEAT 551 LF 9911357919[99]()
Specification : PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.
C
Nonestab
2) SHELL BODY BLANK TO OFK DRG 839L LF 6170444600[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91
C
Nonestab
4) BODY ASSY 4 26941 060 FOR 81MM SMK LF 9911355970[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
5) SET OF IGNITER TOP AND BOTTOM CL BAG LF 9911358667[99]()
Specification : SET OF IGNITER TOP & BOTTOM CLOTH BAG (EMPTY)- SET CONSIST OF (I) IGNITER TOP AS PER HEMRL DRG NO.1126 (ii) IGNITER BOTTOM AS PER HEMRL DRG NO.1127.
C
Nonestab
6) AFT CLOSURE INSULATOR HEAT551 L F 9911357864[99]()
Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243
Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD 2-2-2397 AS PER OEM DRG.NO.304101462 MATERIAL HUP17/30 RE(35634)[3] ARMERAD ESTER PLAST/REINFORCED ESTER PLASTIC. TO PART NO.05209548
C
Nonestab
8) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
9) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
10) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
C
Nonestab
11) 7th set of 3 items for MMHG 9911358531[99]()
Specification : 7th set of 3 items for MMHG consists of Following items-
1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0
2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1
3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUB ASSY OF DETONATOR DISC[99]()
Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ARMING DEVICE CASINIG ASSY FOR-551[99]()
Specification : ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER SCREW TO LF 9911358097[99]()
Specification : ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARBON NOZZLE BLANK FOR 84 HEAT 551 LF 9911357920[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
C
Nonestab
2) ARMING DEVICE CASINIG ASSY FOR 551 Lf 9911357821[99]()
Specification : ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.
C
Nonestab
3) TAIL UNIT ASY 5216051 FOR HEAT-551 (9911357820)[99]()
Specification : TAIL ASSEMBLY TO DRG. NO.5216051.
C
Nonestab
4) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157[99]()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
R
Nonestab
5) PLUNGER TO DRG NO 5209566 Lf 9911358234[99]()
Specification : PLUNGER TO DRG.NO.5209566.
C
Nonestab
6) SET OF 6 COMP OF ARMING DEVICE 551 lf 9911358074[99]()
Specification : SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.2-2-2217 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-
C
Nonestab
7) AFT CLOSURE TO DRG NO 4101894 lf 9911358233[99]()
Specification : AFT CLOSURE TO DRG.NO.4101894.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG CASE FOR 23MM SCHILKA HEI/T[99]()
Specification : CARTG CASE EMPTY TO DRG NO.6018-10-00-01 (7 SHEET)SHEET NO.1DC-36909-A DT.5-7-03 AND SHEET NO.2 DC NO.33817-A DT.10-9-85SHEET NO.3 DC NO.37073-A DT.29-9-06 AND SHEET NO.4 T0 SHEETNO.6 DC NO.33817-A DT.10-9-85 AND SHEET NO.7 DC NO.35587-AD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMUNITION CONTAINER 69A/L, PLASTIC[14]()
Specification : AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
C
Nonestab
2) CONTAINER 38B DRG.NO-CIA/AMN/2008[14]()
Specification : CONTAINER 38B DRG.NO-CIA/AMN/2008 & DRG. PT.NO-ISV-464-A,DC-36787-A,DT.15.10.01, CONSISTING OF (1).BODY DRG.PART NO-ISV-1557,DC-36177-A,DT.28.09.96 (2) LID TO DRG.PART NO ISV-1558,DC-36177-A,DT:28.09.96.(3) RING-A DRG.PART NO.ISV-1559
C
Nonestab
3) FUZE ANTIREMOVAL MINE AT 2B ND EMPTY[61]()
Specification : FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02.
C
Nonestab
4) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A[61]()
Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMO
C
Nonestab
5) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)[61]()
Specification : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.
C
Nonestab
6) AMMN.CONTAINER 47 B[14]()
Specification : AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A Dt.12.07.2013
C
Nonestab
7) SCUFF PROTECTOR[62]()
Specification : SCUFF PROTECTOR TO DRG.NO:155-1110 DC NO.37025-A,DT.08.08.05.
C
Nonestab
8) CONTAINER TO ARDE-1933, DET-4,PT.NO.[14]()
Specification : CONTAINER TO ARDE-1933, DET-4,PT.NO. ITV 170, DC NO.36207-A, DT.02-12-96 SPECN. CQA(A)-2322(g) DC 37193-A.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP_6410120670_DRG9 -04367[64]()
Specification : CUP DRG9 -04367/9- -104/38.350.189,DC.NO.36309-A DT.14.07.97
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP FOR KB 3B DETONATOR EMPTY[65]()
Specification : CUP FOR KB 3B DETONATOR_ EMPTY TO DRG NO. 3_076960/A3-KB-003/1 DC NO 37271 A DT.08.11.2010
C
Nonestab
2) CAP FOR KB 3B DETONATOR EMPTY TO DRG[65]()
Specification : CAP FOR KB 3B DETONATOR EMPTY TO DRG NO 3-076960/A3-KB-003/2, DC NO 37271-A DT08.11.10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) LINER[62]()
Specification : DRG. No.5173961, DC No.36490-A,Dt.19.11.98 (IS:737-1974, GR.19000 IN 0 CONDITION
C
Nonestab
2) DISC TO DRG.NO.2-013535[62]()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
Specification : SPECN ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 20
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]()
Specification : NASK 856 (PROVISIONAL)
C
Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]()
Specification : DRG. NO. ERDL,1164 DET. 2
C
Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : 84MM CARTRIDGE CASE 502 PART NO. 4106869
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG EOFE 3 PIN NO.1 MK3 DET-1[99]()
Specification : 3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG EOFE 2 PIN NO.1 MK-3[99]()
Specification : CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARTG EOFE 3 PIN NO.3 MK3 EMPTY[99]()
Specification : CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ASSY OF S&A(EMPTY) COMPONENTS PFFC[99]()
Specification : ASSEMBLY OF S&A (EMPTY) COMPONENTS,CONSISTING OF FOLLOWING COMPONENTS AS PER ATTACHED LIST.NOTE- QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL.ATTACHED.ENCL.-2
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]()
Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AFT CLOSURE BLANK FOR HEAT-551.[99]()
Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF14 ITEMS WITH PERFORATED DISC LF 9911356669[99]()
Specification : SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]()
Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6099999131 SET OF COMPONENTS FOR 30MM MIL 17HE[60]()
Specification : SET OF COMP. CONSISTING OF GRENADE BODY WITH DRIVING BAND (AFK/DEV-07), RETAINER (AFK/DEV-09), TRANSIT PLUG (AFK/DEV-11), TRANSIT RING (AFK/DEV-08), NOTCHED CLOSE COIL (AFK/DEV-12), CARTG. CASE (AFK/DEV-06)
2) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY
Description : 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY()
Specification : SPECN. NO. CQA(A) 0917
C
Estab
3) 6330130100 FZ 117 DA MK 20 E WITH CAP
Description : 6330130100 FZ 117 DA MK 20 E WITH CAP()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Estab
4) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC
Description : 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC()
Specification : PRIMER ELECTRIC 1A/L EMPTY
C
Estab
Category : p
Grade : 2
Size :
S
1) Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies.
Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.()
Specification : Drg. No.ITW-63
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897
Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
2) BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB[70]()
Specification : BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB
C
Nonestab
3) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]()
Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA
Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB
C
Nonestab
13) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.[70]()
Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.
C
Nonestab
14) Blank for Piston extension stage VI[01]()
Specification : Blank for Piston Extension stage VI to Drg. No. SK JVPC730 for JVPC 5.56 MM
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Pin Lever Catch Magazine for JVPC[70]()
Specification : Pin Lever Catch Magazine for JVPC, Drg. No. 0204-03-02-02-18-020-00DA
C
Nonestab
2) Screw Barrel Cover for JVPC[70]()
Specification : Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366
C
Nonestab
3) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
4) Manufacturing of blank of cocking bracket for JVPC[70]()
Specification : Manufacturing of blank of cocking bracket for JVPC with SAF SK-106 RM St. Rod dia 46 mm rod & length 150 mm 0375003046
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM[70]()
Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition
C
Nonestab
2) BLOCK GAS[70]()
Specification : BLOCK GAS DRG NO AKC 02/4 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
3) Adopter for Cleaning of Bore by pull Through[70]()
Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
1) MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.[94]()
Specification : MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) HINGE CLIP ASSEMBLY AS PER DRG. NO.14030 CQA (A) DRG.NO. D7(L) 1030/186.[20]()
Specification : HINGE CLIP ASSEMBLY AS PER DRG. NO.14030 CQA (A) DRG.NO. D7(L) 1030/186.
C
Nonestab
2) CATCH CLIP ASSEMBLY AS PER DRG.NO.14028 COPIED FROM CQA(A) DRG.NO.D.7(L)1031/107 PART NO.SV 289 DCI-31183-A DTD.08-07-74.[20]()
Specification : CATCH CLIP ASSEMBLY AS PER DRG.NO.14028 COPIED FROM CQA(A) DRG.NO.D.7(L)1031/107 PART NO.SV 289 DCI-31183-A DTD.08-07-74.
C
Nonestab
3) HANDLE CLIP AS PER MSF REG.NO 17370/1 ITEM. NO. 2 AND CQA(A) DRG.NO. DD(L) 9722[20]()
Specification : HANDLE CLIP AS PER MSF REG.NO 17370/1 ITEM. NO. 2 AND CQA(A) DRG.NO. DD(L) 9722
C
Nonestab
4) STRENGTHENING PLATE AS PER CQA ( A ) DRG NO:DD (L) 9722 ITEM NO.4,REQUIRED FOR BOX G-70 TO CQA DRG.NO. SV.68 A;MADE FROM COLD-ROLLED & ANNEALED STEEL TO SPECN.IS:513/1994 GRADE-D OTHER DETAILS AS PER ATTACH SHEETS.[20]()
Specification : STRENGTHENING PLATE AS PER CQA ( A ) DRG NO:DD (L) 9722 ITEM NO.4,REQUIRED FOR BOX G-70 TO CQA DRG.NO. SV.68 A;MADE FROM COLD-ROLLED & ANNEALED STEEL TO SPECN.IS:513/1994 GRADE-"D" OTHER DETAILS AS PER ATTACH SHEETS.
C
Nonestab
5) HANDLE FOR STEEL BOX G-70 AS PER MSF Drg.No.VA/137,TO BE MADE FROM MILD STEEL ROD TO SPECIFICATION IS:280/1978 QUARTER HARD MATERIAL TO BE TESTED TO SPECIFICATION BEFORE FORMATION OF HANDLES AS PER THE DRAWING.[40]()
Specification : HANDLE FOR STEEL BOX G-70 AS PER MSF Drg.No.VA/137,TO BE MADE FROM MILD STEEL ROD TO SPECIFICATION IS:280/1978 QUARTER HARD MATERIAL TO BE TESTED TO SPECIFICATION BEFORE FORMATION OF HANDLES AS PER THE DRAWING.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) MACHINING OF 30 MM BMP-II CARTG. CASE AS PER SCOPE OF WORK (AS PER MSF DRG. NO. NCC/689/1)[94]()
Specification : MACHINING OF 30 MM BMP-II CARTG. CASE AS PER SCOPE OF WORK (AS PER MSF DRG. NO. NCC/689/1)
E
Nonestab
2) STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.[44]()
Specification : STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CASE CARTG OF 25 PR MK 2/1/L BRASS TO DRG NO DD(L) 6557 E PART NO. RW-32[60]()
Specification : DRG NO DD(L) 6557 E PART NO. RW-32
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]()
Specification : CQA(A)- 2322
C
Nonestab
2) BOMB 81MM HE MORTAR C EMPTY[60]()
Specification : CQA (A) 2305 & L 8638-J
C
Nonestab
3) BOMB 81MM MORTAR B EMPTY BODY[60]()
Specification : CQA(A) 2304 & L 8638-J
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE HEAD UNIFOIL TYPE (INF MINE)[99]()
Specification : DESIGNERS REF NO. CQA(A)/AMN/2875 PART NO. IQX 971
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
13) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]()
Specification : DGOF 135 (A)DT. 15-11-99.
C
Nonestab
14) CASING AS PER DRG.NO.NAI(V)7001/1[60]()
Specification : DRG NO:NAI(V) 7001/1 23/07/04.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]()
Specification : CQA(A) 1504
C
Nonestab
2) HOUSING DELAY SHT 2 SPECN CIA-1804[61]()
Specification : CQA(A)1804
C
Nonestab
3) WRENCH FUZING MINE APM 16 A1[42]()
Specification : CQA(A)1804
C
Nonestab
4) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]()
23) PLUG FUZE HOLE, 35 MM NO. 6 AS PER DRG. NO. CIA/AMN/2125 PART NO. ITV 95[60]()
Specification : DRG. NO. CIA/AMN/2125 PART NO. ITV 95
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CUPS TO DRG NO ARDE 2043 DET NO 5[60]()
Specification : CQA(A) 2804
R
Nonestab
2) BODY FOR PYRO CARTG PP9 PC[60]()
Specification : DRG, NO. NASK 855/1 (PROVISIONAL)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CSE FOR H4HA SEAT OF HJT16 A/C[60]()
Specification : 1) CSE PRI. DRG. ARDE: 1460/1 CASE,WASHER & DISC, RING SEALING, DISC 2) CSE SEC. ARDE:1765/1 CUP & SUPPORT, COVER & DISC, RING SEALING 3) CSE DROGUE DRG. ARDE 1657/1-CASE,DISC, WASHER
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE
Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) steel tube OD 159[03]()
Specification : steel tube OD 159 + 1.0/-0.6 mm, ID = 132.8 + 0.6/-1.0 mm, length = 700 +/- 2.0 mm as per specn: BS 970 GR 817 m 40 (EN24) for AFT Motor of RGB 60 EN24
R
Nonestab
2) STEEL TUBE FOR INNER CYLINDER OF RGB 60[03]()
Specification : STEEL TUBE SPCN:BS 970 GR 817 M 40(EN24) OD=159.0 +/-0.6MM, ID=132.8+/0.6MM,LENGTH=170.0+/-2MM,OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM FOR INNER CYLINDER OF RGB60
R
Nonestab
3) STEEL TUBE FOR CF MOTOR OF RGB 60[03]()
Specification : STEEL TUBE AS PER SPCN:BS 970 GR 817 M 40(EN24)
SIZE:OD 180 (+0/-2.0)MM, ID 155(+2.0/-0)MM IN THE LENGTH OF 2M OR ITS MULTIPLES FOR CF MOTOR OF RGB 60
R
Nonestab
4) STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER[03]()
Specification : SUPPLY OF STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER AS PER SPECIFICATION: BS 970 GR 817 M 40(EN 24) OD=219+/-0.7MM,ID= 199.8+/-0.6MM,LENGTH=215.0 +/-2MM OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]()
Specification : IS:2062 (GRADE E 250A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE[63]()
Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999.
S
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL BLANKS FOR ADAPTER[01]()
Specification : STEEL BLANKS FOR ADAPTER OF RGB-60 AS PER DRG NO O RGB 060 1 181 0 REV 0
R
Nonestab
2) STEEL BLANKS FOR BODY BASE OF RGB 60[12]()
Specification : STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0
R
Nonestab
3) STEEL BLANK FOR NOZZLE PLATE FOR RGB 60[12]()
Specification : STEEL BLANK FOR NOZZLE PLATE FOR RGB 60 AS PER DRAWING NO. 0 RGB 060 1 182, AS PER LATEST REVISION
1) TIMBER HARD WOOD/TIMBER SISSOO HARDWOOD (NON-CONIFEROUS) PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) TIMBER SOFT WOOD PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS [21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD (CONIFEROUS) SLEEPER GR. I SPECIES CHIR/FIR SIZE 125MM X 200MM & UP X 2.44 MTR. & [21]()
Specification : IS: 190-1974 III REVISIOV & SUPP. SHUDULE CQA/SS/309
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER CHIR PLANK GR-I. SIZE - 20 MM X 200 MM X 2.44 MTR. & UP[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : IS: 190-1974 IIIRD REVISION
R
Estab
2) TIMBER BABOOL SCANTLING 45 X 45 X 450MM[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
1) PLYWOOD VARIOUS [21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) TIMBER CHIR PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
3) TIMBER HARD WOOD/TIMBER SISSOO HARDWOOD (NON-CONIFEROUS) PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
4) TIMBER SOFT WOOD PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS [21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER HARD WOOD/TIMBER SISSOO HARDWOOD (NON-CONIFEROUS) PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) TIMBER SOFT WOOD PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS [21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER CHIR PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER BABOOL SCANTLING 45X45X450MM[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
1) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) TIMBER CHIR ,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR.[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
3) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR[21](Firm is registered as sole selling agent of M/s Jagdamba Plywood Industries Pvt. Ltd., Kashipur)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
1) CARRIER AMMUNITION 16A FOR MORTAR BOMB 81 MM ILLG. 2A()
IA 1169(n) [DRG.NO. ARDE 2224 part no. ISV 550A]
C
Estab
2) SET OF 8 COMPONENTS FOR SHELL 105MM IFG COLOUR SMOKE()
CQA(A) 2346(c)
C
Non Established
3) BOX STEEL C-239 FOR BOMB 3 KG()
DRG. NO. ARDE 2148 DET NO. 6, AL.NO. 20/2008
C
Non Established
4) GENERATOR SMOKE NO. 5 MK-1 (EMPTY)()
DRG. NO. ARM 1023 D2 SPECN. NO. DTD & P (AIR) 207/ARM
C
Non Established
Category : P
Grade : II
Size :
S
1) Engine Factory Avadi
Name
Specification
Use
Status
1) Steel Packing Case / Container()
CQA(HV) SK-01
E
Estab.
Category : P
Grade : II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Tail Unit Assyembly for 100/120 Kgs.()
As per Specification & Drg.
C
Not Established
Category : DP
Grade : III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE (9911358269)()
ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 DTD. 20/12/94
C
NOT ESTABLISHED
2) SWITCH NO. 6 EMPTY ASSY. OF 8 COMPONENTS (9911358008)()
DRG.NO. D.D(L)-15270 DC NO. 36836-A DT. 14/6/02 EXCEPT EXCEPT SUB ASSEMBLY 2719
C
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) CARRIER AMMUNITION 13 A (STEEL)()
DRG. NO. ISV-488 A, SPECN. IS : 168-1993
C
Estab.
2) AMMUNITION CONTAINER BOX C-43A(STEEL)()
DRG. NO. ISV-529 A, SPECN. NO. IA 1169(N)
C
Estab.
3) CONTAINER()
DRG. NO. 4-24929 INDEX NO. 3 RK 33
C
Estab.
4) AMMUNITION CONTAINER BOX (STEEL) M 35 A()
DRG. NO. ISV-571 A
C
Estab.
5) AMMUNITION CONTAINER BOX C 51 A (STEEL) FOR PACKING OF 125 MM HE()
DRG. NO. ISV-572 A
C
Estab.
6) AMMUNITION CONTAINER BOX C 52 A (STEEL) FOR PACKING OF 125 MM HEAT()
DRG. NO. ISV-573 A
C
Estab.
7) AMMUNITION CONTAINER BOX C 53 A (STEEL) FOR PACKING OF 130 MM HEAT()
DRG. NO. ISV 573 A
C
Estab.
Category : DP
Grade : II
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263
Description : SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
C
Estab
Category : p
Grade : 3
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Insulated Water tank S.S inner, Fuel tank assy. complete, Air tank consisting of 8 items()
As per specification/ Drg.
C
Established
2) Assy. & Mtg. of 2 KL Water Bowser()
As per specification/ Drg.
c
Not Estab.
3) Assy. spare wheel lifting unit complete including handle & rope LPTA-V350-2541-0026(V3)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
26) SHEEP/GOAT SKIN LIMED[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
27) SHEEP/GOAT SKIN RAW WET SALTED[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
28) Wet Blue for Lining Leather[21]()
Specification : QA/L/WET BLUE/BUFF(Lining) date 19.05.2009
R
Nonestab
29) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
30) LASTED CLOSED UPPER FOR SHOE OXFORD IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
31) LASTED CLOSED UPPER FOR SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
32) LASTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
33) LASTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
34) LASTED CLOSED UPPER FOR DERBY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
35) LASTED CLOSED UPPER FOR BOOT NAVY IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
36) LASTED CLOSED UPPER FOR BOOT PARATROOPERS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
37) LASTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
38) soft plain leather thickness 1+0.2mm[21]()
Specification : as per requirement
R
Nonestab
39) chrome tanned black buff din apollo leather embassed full grain leather, thickness 2+0.2mm[21]()
Specification : as per requirement
R
Nonestab
40) RUBBER ADHESIVE[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
41) RUBBER COMPOUND FOR SOLE & HEEL[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
42) RUBBER ADHESIVE FOR TEMPORARY JOINING OF LEATHER COMPONENTS OF [21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
43) RUBBER SOLUTION[21]()
Specification : IND/GS/1535
R
Nonestab
44) INDUSTRIAL SAFETY SHOES DUAL DENSITY INJECTION MOULDED WITH STEEL TOE OF VARIOUS SIZES[21]()
Specification : OEFC/OISB/9001
R
Nonestab
45) TRADE ASSISTANCE FOR MOULDING OPERATION ALONG WITH THE SUPPLY OF RUBBER COMPOUND SOLE AND HEEL OF DIFFERENT SIZES OF BOOT HIGH ANKLE DVS IMPROVED VERSION[21]()
1) CELLULIOD STRIP 50 x 70 MM FOR MORTAR BOMB 51 MM ILLG.()
JSS 1375-03: 2004
C
Estab
2) CELLULIOD STRIP 50 MM SQ x 0.13 MM THICK FOR MORTAR BOMB 51 MM SMOKE()
JSS 1375-03: 2004
C
Estab
3) CARRIER AMMUNITION 17A FOR MORTAR BOMB 81 MM ILLG. 2A()
ARDE 2224 [DRG.NO. CQA(A) 2804(m) part no. ISV 551A]
C
Estab
4) CONTAINER WITH DISC FOR MORTAR BOMB 81 MM ILLG. 2A()
CQA(A) 2303 [DRG. NO. CIA / AMMN/ 811, part no. ITV - 6A]
C
Estab
5) CONTAINER WITH DISC FOR AUGUMENTING CHARGES OF MORTAR BOMB 51 MM SMOKE()
DRG. NO. ARDE 1935 DTE 1, PART NO. ITV 28A
C
Estab
6) CONTAINER PLASTIC 84 T FOR SHELL 84 MM ILLG.()
DRG. NO. OFDR/CARTG/79/A2
C
Estab
7) OBTURATOR FOR SHELL 155 MM ILLG.M1A1()
DRG. NO. CQA -155-1140
C
Estab
8) HALF CUP FOR MORTAR BOMB 120 MM ILLG.()
CIA / AMN/2158 , DRG.NO.ISV 1740
C
Estab
9) AMMUNITION CONTAINER 69 A/L FOR MORTAR BOMB 51 MM SMOKE 2A()
DRG. NO. ARDE 2125 ,Det 3, part no. ISV-533A
C
Estab
10) AMMUNITION CONTAINER PLASTIC 47B FOR FUZE 213 T & P MK 5( M2,M3 & M4)()
CIA /AMMN/2483 [DRG NO.ISV 515A]
C
Estab
11) SPOOL COMPLETE FOR FLARE TRIP WIRE()
CQA (A) 3807 (C) DRG. NO. DD (L) 13461-A/1
C
Non Established
12) BASE CAP FOR RD. 14.5 MM ATA 3 & 6 SEC.()
04-749-0021-0002 DRG. NO. 04-749-130224-01,4E
C
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PACKING BOX FOR UBGL()
DRAWING NO 32Y 0001 005 D3
E
ESTAB
Category : DDP
Grade : I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG
C
Estab
2) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL
C
Estab
3) FIXED BUTT ASSY AS PER DRG No. K 3000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Estab
4) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Estab
5) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Estab
6) GRIP REAR TO DRG NO 33P 3023[70]()
Specification : AS PER DRAWING
C
Estab
7) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Estab
8) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
E
Estab
9) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Estab
10) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Estab
11) STOCK BUTT ASSY[70]()
Specification : AS PER DRAWING
C
Estab
12) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
C
Estab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Nonestab
2) GRIP REAR TO DRG NO 33P 3023[70]()
Specification : AS PER DRAWING
C
Nonestab
3) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Nonestab
4) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
E
Nonestab
5) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]()
Specification : As per Drawing
E
Nonestab
6) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]()
Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028
E
Nonestab
7) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
8) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]()
Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,
E
Nonestab
9) GRIP PISTOL FRONT 30P 1301[70]()
Specification : AS PER DRG OF GRIP PISTOL FRONT 30P 1301
C
Nonestab
10) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.No.K-2040 WITH
FIRM'S MATERIAL
E
Nonestab
11) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080
R
Nonestab
Category : DDP
Grade : I
Size :
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Nonestab
2) GRIP REAR TO DRG NO 33P 3023[70]()
Specification : AS PER DRAWING
C
Nonestab
3) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Nonestab
4) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]()
Specification : As per Drawing
E
Nonestab
5) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]()
Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028
E
Nonestab
6) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
7) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]()
Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,
E
Nonestab
8) GRIP PISTOL FRONT 30P 1301[70]()
Specification : AS PER DRG OF GRIP PISTOL FRONT 30P 1301
C
Nonestab
9) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.No.K-2040 WITH
FIRM'S MATERIAL
E
Nonestab
10) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080
R
Nonestab
11) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
12) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
13) GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
14) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Nonestab
15) OVER MOULDING HOUSING SIGHT ASSY AS PER DRG.NO. TEND 2363 REQUIRED FOR 40mm UBGL. (Component will be supplied by OFT on which moulding at both ends have to be carried out by firm)[00]()
Specification : AS PER DRG.NO. TEND 2363
C
Nonestab
16) PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL[70]()
Specification : AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL
E
Nonestab
17) PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 WITH FIRMS MATERIAL
E
Nonestab
18) STOCK BUTT ASSY[70]()
Specification : AS PER DRAWING
C
Nonestab
19) STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL[70]()
Specification : AS PER DRG OF STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL
C
Nonestab
20) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
C
Nonestab
21) UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2050 WITH FIRMS MATERIAL
C
Nonestab
Category : DDP
Grade : I
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) RIFLE BUTT FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
2) MAGAZINE ASSY. FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
3) GRIP PISTOL FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
4) BUTT FOR LMG 5.56 MM()
AS PER DRAWING
C
Estab.
5) CATCH COCKING HANDLE FOR SMALL ARMS()
AS PER DRAWING
C
Estab.
6) BUTT PLASTIC FOR AKC-14()
AS PER DRG.
C
Non Established
Category : P
Grade : I
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTT FOR LMG 5.56 MM[70]()
Specification : AS PER DRAWING
C
Nonestab
2) BUTT PLASTIC FOR AKC-14[70]()
Specification : AS PER DRG.A
C
Nonestab
3) CATCH COCKING HANDLE FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
C
Nonestab
4) GRIP PISTOL FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
C
Nonestab
5) MAGAZINE ASSY. FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
C
Nonestab
6) RIFLE BUTT FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
C
Nonestab
7) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]()
Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF
C
Nonestab
8) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
9) MUZZLE CAP MOULDING FOR JVPC[70]()
Specification : MUZZLE CAP MOULDING FOR JVPC
C
Nonestab
10) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Estab
3) CATCH COCKING HANDLE FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
R
Estab
4) GRIP PISTOL TO DS CAT NO 1005 560706[70]()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011.
C
Estab
5) MAGAZINE ASSY. FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
R
Estab
6) RIFLE BUTT FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
R
Estab
7) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]()
Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF
C
Estab
8) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
Specification : Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838
Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007.
17) CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Estab
18) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Estab
19) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]()
Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle
C
Estab
20) GAS CYLINDER COVER MOULDING FOR JVPC[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB
C
Estab
21) GRIP ASSY OF REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.
C
Estab
22) GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5 56 IN FINISHED CONDITION[70]()
Specification : GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION.
C
Estab
23) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
24) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE[70]()
Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9
C
Estab
25) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775[70]()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD
C
Estab
26) GUARD HAND ASSY UPPER STEEL STRIP[70]()
Specification : GUARD HAND ASSY. UPPER (STEEL STRIP) AS PER DRG NO./DS CAT NO. 1005-560046 DC (I) NO.26533-SA DT.31.07.10 IN FINISHED CONDITION. NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695, TO SPECN. IS 5:2007.
C
Estab
27) GUARD HAND ASSY. (BLACK)[70]()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO.26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND
C
Estab
28) Guard Hand Assy. Upper (Steel Strip)[70]()
Specification : Guard Hand Assy. Upper (Steel Strip) as per DS CAT No. 1005-560046 Note-The item will be in dark blue gray colour, Colour Code-695, to Specn. IS 5:2007
C
Estab
29) GUARD HAND RIGHT & LEFT (BLACK)[70]()
Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.-1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET),
C
Estab
30) GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)[70]()
Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)
C
Estab
31) Guard Hand Upper Assy[70]()
Specification : Guard Hand Upper Assy to be DS CAT No 1005-560701 DC(1) No 26580-SA dated 08.03.11 for LMG 5.56 MM in finished condition
C
Estab
32) GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA , DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDITION.
Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CONTAINER PLASTIC P-17D (23MM PPL)[99]()
Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301-905060-P[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
E
Nonestab
2) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT 551 LF 9911357815[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
3) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)[20]()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
C
Nonestab
4) SET OF 6 COMP OF ARMING DEVICE 551 lf 9911358074[99]()
Specification : SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.2-2-2217 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARRIER 12A ISV 470A ASY B FOR TPT LF 6573800100[65]()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
E
Nonestab
2) CONTAINER PLASTIC NO P 17 FOR PUFF LF 9911353558[99]()
Specification : CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'.
E
Nonestab
3) CONTAINER POLY NOP 17A FOR ERU AJI LF 9911353656[99]()
Specification : CONTAINER POLYTHENE NO.P-17-A SHEET 3 (METHOD OF PKG)DRG. NOTRD-1293.A.CONTAINER P-17A EMPTY ASSY.OF DRG.NO.TRD - 1281 (a) 1.BODY TO DRG.NO.TRD - 1282 (b) 2.LID TO DRG.NO.TRD - 1283 (b) 3.RING TO DRG.NO.TRD - 1284 (a)B.SLEEVE TO DRG.NO.TR
E
Nonestab
4) CONTAINER P 17C DRG NO ARDE 1892 LF 9911358229[99]()
Specification : CONTAINER P-17C TO DRAWING NO.-ARDE 1892 R.NO.1 DT.20-11-95.(1)CONTAINER P-17C(EMPTY ASSY)-ARDE/1910/1 R.NO.2 DT.30-7-97(2)SLEEVE - ARDE/1892/1 (3).DISC - ARDE/1892/2(4)WASHER - ARDE/1892/3(5)PIECE PACKING TOP - ARDE/1892/4 (6).LABLE - AR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CONTAINER PLASTIC NO.P-17 FOR PPLT[99]()
Specification : CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THIC
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
E
Nonestab
3) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.
E
Nonestab
4) PROPELLANT SUPPORT PART NO 1185138 LF 9911358419[99]()
Specification : PROPELLANT SUPPORT PART NO.1185138 TO OEM DRG.NO.3041011484/ TRD.DRG.NO. 2.2.2412
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) UNIT LOAD ULS 106 24 CONTAINER 9710 LF 9911357747[99]()
Specification : UNIT LOAD ULS 106.24 CONTAINERS 9710 ON PALLET TO DRG.NO. KHPK-210058.FOR PACKING OF 76/62 SRGM AMMUNITION.
C
Nonestab
2) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
3) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
4) 3rd SET OF 4 ITEMS FOR MMHG 9911358526[99]()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PLASTIC CONTAINER -125MM FSAPDS[20]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Lifting plug()
as per drg. no. 5191856
C
Not Estab.
Category : P
Grade : I
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) AMMUNITION CONTAINER 75A (ASSLY) [65]()
Specification : DRG. NO. CQA/AMN/3259
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) AMMUNITION CONTAINER PLASTIC 47 B WITH SEALING RING, FOR FUZE 213 MK-5 (M-2) [65]()
Specification : DRG.NO.CIA/AMN/2483, PART NO ISV 515A
C
Estab
2) TRANSIT PLUG FOR 84 MM ILLG.[62]()
Specification : DRG.NO.CIA/AMMN/2220 PT NO.ISX 318 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1)
1) SPOOL COMPLETE (ITEM NO. 18) POLY MOULDING FOR FTW[64]()
Specification : DRG. NO. DD(L) 13461-A/1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD HAND()
128MM ETT 13000163 32P 4002*2
C
Estab.
2) OVER MOULDING OF HOUSING SIGHT()
128MM ETT 13000164 32P 1330*
C
Estab.
3) OIL BOTTLE()
128MM ETT 13000173 32P 5005
C
Estab.
Category : P
Grade : II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG
C
Estab
2) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL
C
Estab
3) FIXED BUTT ASSY AS PER DRG No. K 3000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Estab
4) GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Estab
5) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Estab
6) GRIP REAR TO DRG NO 33P 3023[70]()
Specification : AS PER DRAWING
C
Estab
7) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Estab
8) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
E
Estab
9) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Estab
10) PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL[70]()
Specification : AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL
E
Estab
11) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Estab
12) STOCK BUTT ASSY[70]()
Specification : AS PER DRAWING
C
Estab
13) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
C
Estab
14) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]()
Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
3) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
4) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE[63]()
Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND
SPECIFICATION NO.S-I/CM/IMMK II/ATP/01.
C
Nonestab
2) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]()
Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(PROV). FOR RI[79]()
Specification : GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(P
1) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) Magazine Assembly with Steel Insert 30RD[79]()
Specification : Magazine Assembly with Steel Insert for 5.56x45MM 30RD To Drg. No. RFI SK. 10019 for 5.56MM Assault Rifle
2) STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) PLASTIC PALLET FOR 303 ANTI RIOT GUN[10]()
Specification : PLASTIC PALLET FOR 0.303 ANTI RIOT GUN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]()
Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) O RING 78 X 2 PART NO 6409795 LF 2013999909[20]()
Specification : O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960
R
Nonestab
2) O RING 37 X 2 4 PART NO 6414441 LF 2013999924[20]()
Specification : O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978
R
Nonestab
3) O RING 26 X 1 2 PART NO 6439353 LF 2013999908[20]()
Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959
R
Nonestab
4) O RING 67X2 5 PART NO 6413251 LF 2013999907[20]()
Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958
R
Nonestab
5) O RING 28 X 2 6 PART NO 6413250 LF 2013999906[20]()
Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957
R
Nonestab
6) O RING 25 1X1 6 PART NO 6416337 LF 2013999903[20]()
Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954
R
Nonestab
7) O RING 30X2 PART NO 6413212 LF 2013999901[20]()
Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953
R
Nonestab
8) O RING 71 X 1 65 PART NO 6413243 LF 2013999913[20]()
Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962
R
Nonestab
9) O RING 71 X 1 8 PART NO 6413211 LF 2013999912[20]()
Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961
R
Nonestab
10) O RING 71 X 1 6 PART NO 6413232 LF 2013999911[20]()
Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956
R
Nonestab
11) O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922[20]()
Specification : O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977
R
Nonestab
12) O RING 76 X 2 PART NO 450001307 LF 2013999919[20]()
Specification : O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974
R
Nonestab
13) O RING 67 X 2 PART NO 6414120 LF 2013999921[20]()
Specification : O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973
R
Nonestab
14) O RING 29 2 X 2 PART NO 6413414 LF 2013999920[20]()
Specification : O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972
R
Nonestab
15) O RING 61 X 1 6 PART NO 6413412 LF 2013999914[20]()
Specification : O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966
R
Nonestab
16) PRIMER GASKET PART NO 6409794 LF 2013999910[20]()
Specification : PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370
R
Nonestab
17) O RING LF 9911357869[99]()
Specification : "O" RING 71*1.65TO DRG.NO.TRD122263
C
Nonestab
18) O Ring 74 5x3 TO DRG NO TRD 845a LF 6170444650[61]()
Specification : O Ring 74.5x3 TO DRG NO TRD 845a
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PISTOL GRIP FOR JVPC
Description : PISTOL GRIP FOR JVPC()
Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 7th set of 3 items for MMHG 9911358531[99]()
Specification : 7th set of 3 items for MMHG consists of Following items-
1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0
2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1
3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING LF 9911357860
Description : O RING LF 9911357860()
Specification : DRG.NO. TRD-1-2-2261
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) DIAPHRAGM TO DRG.NO.TRD-2-2-2244[99]()
Specification : DIAPHRAGM TO DRG.NO.TRD-2-2-2244.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6495000070 LEATHER WASHER LUB FOR 105MM IFG HE[64]()
Specification : LEATHER WASHER LUBRICATED, DIA 59.69 MM, DESIGNER REF.CIA(A)-177.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15[65]()
Specification : SLEEVE, PART NO. 2-17 DRG.NO.3-024045, 3B15, DC 36767-A, MATL: TYPE NYLON-66 TO SPECN. DEF STAN 93-8/1 (LATEST ISSUE) WITH ELECTRICAL PROPERTIES & IMPACT STRENGTH AS PER GOST.10589-73
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900110 INSERT DETAIL NO.67 FOR 125 MM HEAT[64]()
Specification : MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A".
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900330 BASE TO DRG.4-025998 081 125MM HEAT[64]()
Specification : SPECN. NO. JSS 9330-05
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2103218071 PIECE PACKNG END 10MM TH RUDRA[21]()
Specification : PIECE PACKING ENDSIZE: 172MM X 130MM X 10MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3
C
Estab
2) 2103218070 PIECE PACKNG SIDE 6MM TH RUDRA[21]()
Specification : PIECE PACKING SIDESIZE:-274MM X 172MM X 6MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3
C
Estab
3) 2103218069 PIECE PACKNG TOP AND BTM 20MM TH RUDRA[21]()
Specification : PIECE PACKING TOP & BOTTOMSIZE:-254MM X 130MM X 20MM THICKMTL:EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2103789155 POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I SIZE 200 MM X 0 076 MM THICK TO SPECN NO JSS 9330 03 2014 REV 03[21]()
Specification : POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I,SIZE 200 MMX 0.076 MM THICK TO SPECN. NO. JSS 9330-03:2014 (REV.03)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
E
Estab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]()
Specification : As per Drawing
E
Nonestab
2) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]()
Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028
E
Nonestab
3) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
4) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
5) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
6) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]()
Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,
E
Nonestab
7) GRIP PISTOL FRONT 30P 1301[70]()
Specification : AS PER DRG OF GRIP PISTOL FRONT 30P 1301
C
Nonestab
8) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Nonestab
9) GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
10) GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
11) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Nonestab
12) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL
C
Nonestab
13) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.No.K-2040 WITH
FIRM'S MATERIAL
E
Nonestab
14) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUFFER DS CAT NO 1005 007278 TO DRAWING NO A 4109[70]()
Specification : AS PER THE DRAWING OF BUFFER DS CAT. NO. 1005-007278 TO DRG. NO. A 4109
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
3) FIXED BUTT ASSY AS PER DRG No K3000 STAR WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL
C
Nonestab
4) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
5) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
6) PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR[70]()
Specification : PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
7) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
8) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
9) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
10) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
11) Grip Pistol Assembly as per drawing No 27P 6500[70]()
Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1
C
Nonestab
12) Manufature and supply of BUTT NORMAL ASSEMBLY POLYMER AS PER DRG NO 27P 660 02 FOR RIFLE 7 62MM 1A1[82]()
Specification : Manufature and supply of BUTT NORMAL ASSEMBLY (POLYMER) AS PER DRG. NO. 27P 660-02.FOR RIFLE 7.62MM 1A1
E
Nonestab
13) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
14) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MOULDED PLASTIC TRAY TO OFAJ DRG NO FS 2995B FOR LINER 84MM HEDP 502[00]()
Specification : AS PER QMI & DRAWING NO FS 2995B
C
Estab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PLASTIC CONTAINER FOR AMK 339[14]()
Specification : As per enclosed MI
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TWIN CONTAINER 520 82 PART 1202503 LF 9911358476
Description : TWIN CONTAINER 520 82 PART 1202503 LF 9911358476()
Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
5) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]()
Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA
C
Estab
6) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]()
Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897
Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Butt in black colour for LMG through injection moulding
Description : Butt in black colour for LMG through injection moulding()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) CONTAINER WITH DISC CELL 81 MM()
Specification : CQA (A) 2303
R
Estab
2) CONTAINER WITH DISC CIA/2303/DC(I)()
Specification : CQA(A) 2303
R
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP PISTOL
Description : GRIP PISTOL()
Specification : AS PER DRAWING
C
Estab
2) 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775
Description : 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775()
Specification : AS PER DRG.
C
Estab
3) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
Description : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
7) TRIGGER GUARD MOULDING for JVPC
Description : TRIGGER GUARD MOULDING for JVPC()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP PISTOL
Description : GRIP PISTOL()
Specification : AS PER DRAWING
C
Estab
2) 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775
Description : 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775()
Specification : AS PER DRG.
C
Estab
3) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
Description : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
7) TRIGGER GUARD MOULDING for JVPC
Description : TRIGGER GUARD MOULDING for JVPC()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Estab
Category : p
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) CENTERING BAND FOR 120 MM FSAPDS MK II[99]()
Specification : RAW MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF STANDARD 93-8 / MARANYL NYLON A 100
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DRIVING BAND FOR 120 MM FSAPDS MK II[01]()
Specification : THE MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF DEF STANDARD 93-8/MARANYLNYLON A 100
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TOP WASHER TO OFAJ DRG NO FS 513F[00]()
Specification : DRG. NO. FS-513F.
C
Nonestab
2) WASHER NOZZLE TO OFAJ DRG NO FS 518B[00]()
Specification : WASHER NOZZLE TO OFAJ DRG NO FS 518B
C
Nonestab
3) SKIRT RING TO OFAJ DRG NO FS 517 A[00]()
Specification : SKIRT RING TO OFAJ DRG. NO.FS-517 A
C
Nonestab
4) NOZZEL TO ARDE DRG NO 1135 DET 10[00]()
Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14
C
Nonestab
5) SEALING WASHER TO OFAJ DRG NO FS 514 G[00]()
Specification : SEALING WASHER TO OFAJ DRG.NO.FS-514 G
C
Nonestab
6) ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TOSPECBS 1474 HE 15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2 POINT 5 METRES SIZE 23 POINT 50 MINUS 0 POINT 052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Nonestab
7) ALUMINIUM STRIP TO SPECN BS 1470 GR S 1B IN O CONDITION IN COIL FORM SIZE 0 POINT 3 PLUS 0 POINT 03 OR MINUS 0 POINT 05 MM THICK X 40 PLUS OR MINUS 0 POINT 2 MM WIDE[00]()
Specification : ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.
R
Nonestab
8) WASHER PLUG TRANSIT TO OFAJ DRG NO FS 524 D[00]()
Specification : WASHER PLUG TRANSIT TO OFAJ DRG. NO. FS-524 D
C
Nonestab
9) LOCKING SLEEVE TO OFAJ DRG NO FS 525[00]()
Specification : LOCKING SLEEVE TO OFAJ DRG.NO. FS-525
R
Nonestab
10) PLASTIC CONTAINER TO DRG NO FS 547 IN FUZE 24A[00]()
Specification : PLASTIC CONTAINER TO DRG.NO. FS-547 IN FUZE-24A
C
Nonestab
11) PROTECTIVE PLUG FOR SHELL BODY TO DRG NO SK 7747 B 30MM GHASHA[00]()
Specification : PROTECTIVE PLUG FOR SHELL BODY TO DRG.NO.SK-7747/B(30MM GHASHA)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COPPER BAND PROTECTOR AS PER DRG NO SM 285 BMATERIAL POLYTHENE HIGH DENSITY TYPE 2[00]()
Specification : COPPER BAND PROTECTOR AS PER DRG. NO. SM-285 B. MATERIAL POLYTHENE HIGH DENSITY TYPE - 2
C
Nonestab
2) PLUG 52 MM FOR SHELL 130 MM HE[00]()
Specification : AS PER DRG
C
Nonestab
3) NYLON RING TO CQA[00]()
Specification : AS PER DRG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MOUTH PROTECTOR TO DRG NO CC 509 A FOR 125 MM SCCC METALIC BASE[00]()
Specification : MOUTH PROTECTOR TO DRG. NO. CC-509 A (FOR 125 MM SCCC METALIC BASE)
C
Nonestab
2) TRANSIT PLUG FOR CC AK 100 AS PER DRG NO CC100 SK 2105 A[00]()
Specification : TRANSIT PLUG FOR CC AK-100 AS PER DRG.NO.CC100/SK/2105/A
C
Nonestab
3) PLUG END CLOSING ASSY FOR STATIC FIRING AS PER ARDE DRG NO 8603 02 01 01 03 000 22PA[00]()
Specification : PLUG END CLOSING ASSY (FOR STATIC FIRING) AS PER ARDE DRG.NO 8603 02 01 01 03 000 22PA [MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATION NO. ARDE/SPECN/PINAKA/RKT-13 ISSUE: 02, REV NO:0 DATED 04/09/2015]
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TOP WASHER TO DRG NO ARDE 1135 DETAIL NO 13 AL NO 20 2018 DTD 09 10 2018[00]()
Specification : TOP WASHER TO DRG. NO. ARDE 1135 DETAIL NO.13 AL NO. 20/2018 DTD. 09/10/2018
