List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
81 Bhandari Industrial Corporation
32/34, C P Tank Road, PB 3520, MUMBAI MAHARASHTRA
PIN1 : 400004
Phone No. : 022 23858212 		ACOPB3307R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Ferrous Metals & Alloys() As per drawing / specifications R Estab.
2) Non-Ferrous Metals & Alloys() As per drawing / specifications R Estab.
Category : DP
Grade : II
Size : M
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985 Description : 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985() Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985 R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF FORGING OF LOWER RING TO DRG NO AK 630 119 1 AND FORGING OF UPPER RING TO DRG NO AK 630 119 2 AND FORGING OF INTERNAL RING TO DRG NO AK 630 119 25 MAT SPECN GRADE X 2 OCR 13 TO IS 6911 92 Description : SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF FORGING OF LOWER RING TO DRG NO AK 630 119 1 AND FORGING OF UPPER RING TO DRG NO AK 630 119 2 AND FORGING OF INTERNAL RING TO DRG NO AK 630 119 25 MAT SPECN GRADE X 2 OCR 13 TO IS 6911 92() Specification : SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF:- (A) FORGING OF LOWER RING TO DRG NO AK-630 119-1. (B) FORGING OF UPPER RING TO DRG NO AK-630 119-2. (C) FORGING OF INTERNAL RING TO DRG NO AK-630 119-25. MAT. SPECIFICATION:G C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN Description : 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN() Specification : BS:2874-1986 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Steel Strip 15 x 0point2 mm BS1449 IS513DD LF 0121060022 Description : Steel Strip 15 x 0point2 mm BS1449 IS513DD LF 0121060022() Specification : Steel Strip 15+/- 0.50 mm wide X 0.20-0.02 mm thick to specn: IS513-2008 GR.CR3 or BS-1449- section 1.1.1991 GR.1 CSIN Coil of ID 60MM LF 0121060022 R Estab
Category : s
Grade : 3
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) PLATE MILD STEEL TO 0101020160 Description : PLATE MILD STEEL TO 0101020160() Specification : IS:2062(16MM)THK R Estab
2) PLATE MILD STEEL 32MM THK TO 0112020320 Description : PLATE MILD STEEL 32MM THK TO 0112020320() Specification : IS:2062(32) R Estab
3) PLATE MILD STEEL TO 0112020254 Description : PLATE MILD STEEL TO 0112020254() Specification : IS:2062(25) R Estab
4) BRASS ROUND ROD TO 0717640060 Description : BRASS ROUND ROD TO 0717640060() Specification : GOST:15527-70(60MM) R Estab
5) ROUND GR 20X13 32MM DIA STEEL TO 0325200032 Description : ROUND GR 20X13 32MM DIA STEEL TO 0325200032() Specification : GOST:5632-72(32MM) R Estab
6) ROUND GR 20X2H4A TO 0412500038 Description : ROUND GR 20X2H4A TO 0412500038() Specification : GOST:4543-71(38MM) R Estab
7) STEEL PLATE TO 0133020005 Description : STEEL PLATE TO 0133020005() Specification : 5X1250X2500 R Estab
8) SHEET STEEL 3 15MM THK TO 0112020032 Description : SHEET STEEL 3 15MM THK TO 0112020032() Specification : IS:2062(3.15) R Estab
9) STEEL PLATE GRADE 45 C8 TO 0142122056 Description : STEEL PLATE GRADE 45 C8 TO 0142122056() Specification : IS:5517-1993(56MM-THK) R Estab
10) ANGLE EQUAL MILD ST 40x40x5MM TO 0101070068 Description : ANGLE EQUAL MILD ST 40x40x5MM TO 0101070068() Specification : IS:2062(40X40X5) R Estab
11) ANGLE EQUAL M S TO 0101070087 Description : ANGLE EQUAL M S TO 0101070087() Specification : IS:808-99(50X50X6) R Estab
12) ANGLE MILD ST EQUAL 65X65X6 MM TO 0101070139 Description : ANGLE MILD ST EQUAL 65X65X6 MM TO 0101070139() Specification : IS-2062(65x65x6) R Estab
13) ANGLE EQUAL MILD ST 75x75x6MM ANNEALED TO 0133070151 Description : ANGLE EQUAL MILD ST 75x75x6MM ANNEALED TO 0133070151() Specification : IS:2062(75X75X6) R Estab
14) 20X2H4A W ESR GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412602090 Description : 20X2H4A W ESR GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412602090() Specification : 20X2H4A-W(ESR)(DIA90 R Estab
15) 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500034 Description : 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500034() Specification : 20X2H4A(DIA.34) R Estab
16) STAINLESS STEEL AISI 321 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0323306125 Description : STAINLESS STEEL AISI 321 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0323306125() Specification : ST.STEEL(DIA.125) R Estab
17) ROUND ALUMINIUM ALLOY TO 0610200048 Description : ROUND ALUMINIUM ALLOY TO 0610200048() Specification : GOST:4784-74(48) R Estab
18) PLATE TO 0610220642 Description : PLATE TO 0610220642() Specification : AMG6(26MM-THK) R Estab
19) ALUMINIUM ALLOY GRADE 19600 CONDITION TO 0619220799 Description : ALUMINIUM ALLOY GRADE 19600 CONDITION TO 0619220799() Specification : IS:736-86(25) R Estab
20) 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500050 Description : 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500050() Specification : 20X2H4A(DIA.50) R Estab
21) PIPE GR ST 10 57MM OD X 3MM THK TO 0111555563 Description : PIPE GR ST 10 57MM OD X 3MM THK TO 0111555563() Specification : GOST:1050-74(57X3) R Estab
22) PIPE ST GR B10 60X2 5 TO 0111555571 Description : PIPE ST GR B10 60X2 5 TO 0111555571() Specification : GOST:8734-75(60X2.5) R Estab
23) SHEET 5 III 10KP HARTEN TO 0103020020 Description : SHEET 5 III 10KP HARTEN TO 0103020020() Specification : GOST:16523-70(2.0) R Estab
24) 60C2XA GOST 14959 79 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0353100022 Description : 60C2XA GOST 14959 79 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0353100022() Specification : 60C2XA(DIA.22) R Estab
25) STEEL ROUND TO 0103000060 Description : STEEL ROUND TO 0103000060() Specification : IS:7283-1992(60MM) R Estab
26) SHEET 1 0X600X1200MM LG GR DM 0 8 L 63 TO 0710922297 Description : SHEET 1 0X600X1200MM LG GR DM 0 8 L 63 TO 0710922297() Specification : GOST:931-90(1MM) R Estab
27) SHEET GR ST 15 4 II 2 0MMX1250MMX2500LG TO 0122022455 Description : SHEET GR ST 15 4 II 2 0MMX1250MMX2500LG TO 0122022455() Specification : GOST:19903-74(2MM) R Estab
28) WIRE STAINLESS SOFT 1 2 MM TO 0326011012 Description : WIRE STAINLESS SOFT 1 2 MM TO 0326011012() Specification : AISI:304(1.2)SOFT R Estab
29) OPEN HEARTH STEEL 15 GOST 1050 60 FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000090 Description : OPEN HEARTH STEEL 15 GOST 1050 60 FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000090() Specification : GOST:1050-60(DIA.90) R Estab
30) 45XH GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0352950060 Description : 45XH GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0352950060() Specification : 45XH(SQUARE60) R Estab
31) SHEET GR ST 15 4 III 3 0X1250X2500MM LG TO 0122022465 Description : SHEET GR ST 15 4 III 3 0X1250X2500MM LG TO 0122022465() Specification : GOST:19903-74(3MM) R Estab
32) OPEN HEARTH STEEL 15 TO 0122022698 Description : OPEN HEARTH STEEL 15 TO 0122022698() Specification : GOST:1577-70(25MM) R Estab
33) STEEL15 GOST 1050 74 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000080 Description : STEEL15 GOST 1050 74 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000080() Specification : STEEL-15(DIA.80) R Estab
34) PLATE MILD ST 40MMTHKX1250MMX2500MM TO 0112020381 Description : PLATE MILD ST 40MMTHKX1250MMX2500MM TO 0112020381() Specification : IS:2062(40) R Estab
35) PLATE MILD ST 50MMTHKX1250X2500MM TO 0112020508 Description : PLATE MILD ST 50MMTHKX1250X2500MM TO 0112020508() Specification : IS:2062(50) R Estab
36) PLATE MILD ST 56MMTHKX1250MMX2500MM TO 0112020560 Description : PLATE MILD ST 56MMTHKX1250MMX2500MM TO 0112020560() Specification : IS:2062(56) R Estab
37) PLATE MILD ST 75MMTHKX1250MMX2500MM TO 0112020750 Description : PLATE MILD ST 75MMTHKX1250MMX2500MM TO 0112020750() Specification : IS:2062(75) R Estab
38) ROUND GR 45XH2M FA SH 100MM TO 0412702100 Description : ROUND GR 45XH2M FA SH 100MM TO 0412702100() Specification : GOST:4543-71(100) R Estab
39) PLATE MILD ST 80MMx1250X5000MM LG TO 0103020794 Description : PLATE MILD ST 80MMx1250X5000MM LG TO 0103020794() Specification : IS:2062(80) R Estab
40) PIPE 14X1 5 ST GR B10 TO 0111756155 Description : PIPE 14X1 5 ST GR B10 TO 0111756155() Specification : GOST:8734-75(14X1.5) R Estab
41) SHEET 5 III G10KP GOST 16523 70 TO 0111822444 Description : SHEET 5 III G10KP GOST 16523 70 TO 0111822444() Specification : B1.5GOST:19904-74 R Estab
42) ANGLE EQUAL MILD ST 100x100x10MM THK TO 0101070200 Description : ANGLE EQUAL MILD ST 100x100x10MM THK TO 0101070200() Specification : IS:2062(100X100X10) R Estab
43) ANGLE MILD STEEL 75x75x8 MM TO 0133070149 Description : ANGLE MILD STEEL 75x75x8 MM TO 0133070149() Specification : IS:2062(75X75X8) R Estab
44) SHEET 85 GOST 14959 69 TO 0156122486 Description : SHEET 85 GOST 14959 69 TO 0156122486() Specification : TY:14.1.1133.74(4) R Estab
45) PLATE 20MMX1250X2500MM TO 0133020020 Description : PLATE 20MMX1250X2500MM TO 0133020020() Specification : IS:2062(20)THK R Estab
46) ANGLE TO 0326170084 Description : ANGLE TO 0326170084() Specification : GOST:19281(45X28X4) R Estab
47) TUBE STEEL 10MM OD X 2 5MM THK X 2000MM LG TO 0131055674 Description : TUBE STEEL 10MM OD X 2 5MM THK X 2000MM LG TO 0131055674() Specification : GOST:8734-75(10X2.5) R Estab
48) PIPE B20 GOST 8733 74 TO 0131055170 Description : PIPE B20 GOST 8733 74 TO 0131055170() Specification : GOST:8734-75(16X3) R Estab
49) SHEET 8GOST 19903 74 0 TB1 M1 TO GOST TO 0141022613 Description : SHEET 8GOST 19903 74 0 TB1 M1 TO GOST TO 0141022613() Specification : GOST:19903-74(8) R Estab
50) ROUND STEEL EN24 85MM DIA TO 0334002085 Description : ROUND STEEL EN24 85MM DIA TO 0334002085() Specification : BS:970(85)EN24 R Estab
51) PIPE GR 12X18H10T TO 0323155187 Description : PIPE GR 12X18H10T TO 0323155187() Specification : GOST:9941(18X2) R Estab
52) PIPE TO 0610155171 Description : PIPE TO 0610155171() Specification : OST:192096-83(16X3.5) R Estab
53) PIPE TO 0131055288 Description : PIPE TO 0131055288() Specification : GOST:8734-75(25X2) R Estab
54) PLATE MILD ST 125 THKx1250 WDTHx2500MMLG TO 0101020925 Description : PLATE MILD ST 125 THKx1250 WDTHx2500MMLG TO 0101020925() Specification : IS:2062(125MM)THK R Estab
55) PLATE MILD ST 160 THKx1250 WDTHx2500MM LG TO 0101020944 Description : PLATE MILD ST 160 THKx1250 WDTHx2500MM LG TO 0101020944() Specification : IS:2062(160MM) R Estab
56) PLATE MILD ST 120 THKx1250 WDTHx2500MMLG TO 0133020922 Description : PLATE MILD ST 120 THKx1250 WDTHx2500MMLG TO 0133020922() Specification : IS:2062(120) R Estab
57) PLATE 10MMTHKX1250 WDTHX2500MM LG TO 0101020100 Description : PLATE 10MMTHKX1250 WDTHX2500MM LG TO 0101020100() Specification : IS:2062(10)THK R Estab
58) ROUND EN 24 70MM DIA STEEL TO 0334002070 Description : ROUND EN 24 70MM DIA STEEL TO 0334002070() Specification : BS:970(70)EN24 R Estab
59) PLATE GRST 15 3 T 16MMX1250X1800 2500 TO 0122022653 Description : PLATE GRST 15 3 T 16MMX1250X1800 2500 TO 0122022653() Specification : GOST:19903-74(16MM) R Estab
60) WIRE MESH NETTING SS 4 5MM SQ X0 9MM DIA TO 1761259910 Description : WIRE MESH NETTING SS 4 5MM SQ X0 9MM DIA TO 1761259910() Specification : GOST:3826(4.5X0.9) R Estab
61) SHEET BRASS CZ 108 O CONDITION 10SWG TO 0710820032 Description : SHEET BRASS CZ 108 O CONDITION 10SWG TO 0710820032() Specification : BS:2870-80(10G) R Estab
62) PLATE GR ST 40 3 T TO 0141022624 Description : PLATE GR ST 40 3 T TO 0141022624() Specification : GOST:19903-74(10) R Estab
63) ROUND M C QUALITY GR 15 25MM DIA TO 0122000025 Description : ROUND M C QUALITY GR 15 25MM DIA TO 0122000025() Specification : GOST:1050(25MM) R Estab
64) ROLLED STEEL ANGLES TO 0326270089 Description : ROLLED STEEL ANGLES TO 0326270089() Specification : GOST:8509-93(45X45X5) R Estab
65) PLATE 16 MM THICK STEEL TO 0132020159 Description : PLATE 16 MM THICK STEEL TO 0132020159() Specification : IS:2062(16) R Estab
66) SHEET ST GR 15 4 II 2 0X700X1400MM LONG TO 0122022449 Description : SHEET ST GR 15 4 II 2 0X700X1400MM LONG TO 0122022449() Specification : GOST:19903-74(2.0) R Estab
67) ROUND GR ST 40 38 MM DIA 38 MM DIA STEEL TO 0141000038 Description : ROUND GR ST 40 38 MM DIA 38 MM DIA STEEL TO 0141000038() Specification : GOST:1050(38) R Estab
68) PLATE MILD ST 8 THKX1250 WIDTH X 2500MM LG TO 0101020080 Description : PLATE MILD ST 8 THKX1250 WIDTH X 2500MM LG TO 0101020080() Specification : IS:2062(8MM)THK R Estab
69) SHEET MILD ST SWG 4MM THICK TO 0132020040 Description : SHEET MILD ST SWG 4MM THICK TO 0132020040() Specification : IS:2062(4MM) R Estab
70) S M SHEET 3 15MM THICK TO 0101022315 Description : S M SHEET 3 15MM THICK TO 0101022315() Specification : HVF/LF:0101022315 R Estab
71) CHANNEL MILD ST 75x40MM TO 0101070320 Description : CHANNEL MILD ST 75x40MM TO 0101070320() Specification : IS:2062(75X40) R Estab
72) PLATE MILD STEEL 6MM THK TO 0112020064 Description : PLATE MILD STEEL 6MM THK TO 0112020064() Specification : IS:2062(6) R Estab
73) TUBE TO 0111555348 Description : TUBE TO 0111555348() Specification : GOST:8734-75(32X2.5) R Estab
74) PIPE ST B10 TO 0111555409 Description : PIPE ST B10 TO 0111555409() Specification : GOST:8734-75(38X2.5) R Estab
75) TUBE TO 0111555502 Description : TUBE TO 0111555502() Specification : GOST:8734-75(48X1.5) R Estab
76) ANGLE GR 09G2 2 32x32x4MM STEEL HOT ROLLED ANNEALED TO 0326170033 Description : ANGLE GR 09G2 2 32x32x4MM STEEL HOT ROLLED ANNEALED TO 0326170033() Specification : GOST:19282(32X32X4) R Estab
77) FLAT MILD STEEL 75x20MM TO 0133033342 Description : FLAT MILD STEEL 75x20MM TO 0133033342() Specification : IS:2062(75X20MM) R Estab
78) FLAT MILD STEEL 75x25 MM TO 0133230416 Description : FLAT MILD STEEL 75x25 MM TO 0133230416() Specification : IS:2062(75X25) R Estab
79) SHEET STEEL GR 15 4 II 2 5X1250X2500MM LG TO 0122022458 Description : SHEET STEEL GR 15 4 II 2 5X1250X2500MM LG TO 0122022458() Specification : GOST:16523-70(2.5) R Estab
80) ROUND MILD ST 180 MM DIA TO 0101000180 Description : ROUND MILD ST 180 MM DIA TO 0101000180() Specification : IS:2062(180MM) R Estab
81) ANGLE EQUAL M S 40x40x6MMX6MTRS LG TO 0101070069 Description : ANGLE EQUAL M S 40x40x6MMX6MTRS LG TO 0101070069() Specification : IS:2062(40X40X6) R Estab
82) PIPE U O 175 02 258 TO 0131055905 Description : PIPE U O 175 02 258 TO 0131055905() Specification : GOST:8734-75/34X2 R Estab
83) ROUND ST HSS 100 MM DIA TO 0256500100 Description : ROUND ST HSS 100 MM DIA TO 0256500100() Specification : ASP-30(100) R Estab
84) PLATE ST 7 0x1000x2000MM GR 20 5 IIIG HOT ROLLED ANNEALED CONDITION TO 0131022602 Description : PLATE ST 7 0x1000x2000MM GR 20 5 IIIG HOT ROLLED ANNEALED CONDITION TO 0131022602() Specification : GOST:16523-70(7MM) R Estab
85) SHEET CR ST 3X1250X2500MM GR 10KP 4 II TO 0111822470 Description : SHEET CR ST 3X1250X2500MM GR 10KP 4 II TO 0111822470() Specification : GOST:1050-74(3.0) R Estab
86) PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257 Description : PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257() Specification : GOST:8733(22X2) R Estab
87) AL BRONZE 38MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600038 Description : AL BRONZE 38MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600038() Specification : GOST:18175-78(38MM) R Estab
88) ANGLE GR 09G2 2 40x40x4MM STEEL HOT ROLLED ANNEALED TO 0326170067 Description : ANGLE GR 09G2 2 40x40x4MM STEEL HOT ROLLED ANNEALED TO 0326170067() Specification : GOST:19282(40X40X4) R Estab
89) STEEL ROUND BAR GRADE 40 TO 0141000030 Description : STEEL ROUND BAR GRADE 40 TO 0141000030() Specification : GOST:1050(30)RDGR40 R Estab
90) TUBE GR AMTS M GOST 4784 74 TO 0615255699 Description : TUBE GR AMTS M GOST 4784 74 TO 0615255699() Specification : GOST:4784-74 R Estab
91) SHEET GR 15 3 T 6 0X1400X2500MM LG TO 0122022595 Description : SHEET GR 15 3 T 6 0X1400X2500MM LG TO 0122022595() Specification : GOST:19903-74(6MM) R Estab
92) SHEET 4MM GOST 19903 74 TO 0326322485 Description : SHEET 4MM GOST 19903 74 TO 0326322485() Specification : GOST:19282-73(4MM) R Estab
93) SHEET CHEQUERED RHOMBIC 5MM THICK TO 0329420487 Description : SHEET CHEQUERED RHOMBIC 5MM THICK TO 0329420487() Specification : GOST:8568(5MM) R Estab
94) ROUND GR 20X 36MM DIA STEEL TO 0352500036 Description : ROUND GR 20X 36MM DIA STEEL TO 0352500036() Specification : GOST:4543(36) R Estab
95) PLATE STEEL GR 09G2 6 TO 0326422616 Description : PLATE STEEL GR 09G2 6 TO 0326422616() Specification : GOST:19282(09G2-6) R Estab
96) PLATE MILD STEEL 5MM THKTO 0112020048 Description : PLATE MILD STEEL 5MM THKTO 0112020048() Specification : IS:2062(5) R Estab
97) ROUND STEEL GRADE ST20 14MM DIA HOT ROLLED ANNEALED CONDITION TO 0131000014 Description : ROUND STEEL GRADE ST20 14MM DIA HOT ROLLED ANNEALED CONDITION TO 0131000014() Specification : GOST:1050-74(14MM) R Estab
98) STEEL SHEET 10KP TO 0111822483 Description : STEEL SHEET 10KP TO 0111822483() Specification : GOST:1577-70 R Estab
99) ANGLE STEEL HR A 50X50X6MM GR 09G2 12 TO 0326170087 Description : ANGLE STEEL HR A 50X50X6MM GR 09G2 12 TO 0326170087() Specification : GOST:19281(50X50X6) R Estab
100) PIPE STEEL 30MM OD X 1MM THK X 2000MM LG TO 0132556326 Description : PIPE STEEL 30MM OD X 1MM THK X 2000MM LG TO 0132556326() Specification : GOST:8734-75(30X1) R Estab
101) TUBE STEEL 24 ODX3 5 THK X 1250 2500MM LG TO 0131055272 Description : TUBE STEEL 24 ODX3 5 THK X 1250 2500MM LG TO 0131055272() Specification : GOST:8734-75(24X3.5) R Estab
102) TUBE B20 GOST 8733 74 LENGTH 5 7 METERS TO 0131055260 Description : TUBE B20 GOST 8733 74 LENGTH 5 7 METERS TO 0131055260() Specification : GOST:8734-75(22X3) R Estab
103) PIPE TO 0218555674 Description : PIPE TO 0218555674() Specification : GOST:8732-78(121X22) R Estab
104) STEEL TO IS 2062 FE410WA TO 0133020120 Description : STEEL TO IS 2062 FE410WA TO 0133020120() Specification : IS:2062-92(12) R Estab
105) TUBE ST GR B10 34x4 5MM THK TO 0111756359 Description : TUBE ST GR B10 34x4 5MM THK TO 0111756359() Specification : GOST:8734-75(34X4.5) R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA Description : STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA() Specification : STEEL ROUND TO SPECN. IS:7283-1992 WITH PROPERTIES AS PER SPECN IS 2062-2006 DESIGNATION (FE 410 W) QUALITY-A HAVING STRAIGHT LENGTH OF 2 TO 3 METERS. SIZE: - 115.00 +2.00 MM DIA R Estab
Category : ddp
Grade : 1
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 15 MM DIA SPCN IS 5517 93 50C8 Description : STEEL ROD 15 MM DIA SPCN IS 5517 93 50C8() Specification : STEEL ROD 15 MM DIA SPCN - IS : 5517-93-50C8 R Estab
Category : ddp
Grade : 3
Size : M
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRS ROND 20 MM DIA HALF HARD() Specification : BRASS ROUND 3/4" OR 20 MM DIA HALF HARD TYPE I LENGTH 1 TO 2 METRES SPECN: IS: 319:1989 (FOURTH REV.) R Estab
2) T AND D ST RND 133 T 3 ANN AND STRA 40MM D() Specification : TOOL & DIE STEEL ROUND, DESIGN 133 T 3 , HOT ROLLED, ANNEALED & M/C STRAIGHTENED, 40 MM DIA, TO SPECN IS: 3748-1990. MIN LENGTH 2 TO 3 MTR. R Estab
3) T and D RND 133 T 3 45 MM 2 TO 3 MTR() Specification : TOOL & DIE STEEL ROUND DESIGNATION 133 T 3 , HOT ROLLED, ANNELED & M/C STRAIGHTENED, 45 MM DIA, 2 TO 3 METRE LONG, TO SPECN IS: 3748-1990 SECOND REVISION R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18 POINT 5 1 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 POINT 5 MTRS Description : STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18 POINT 5 1 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 POINT 5 MTRS() Specification : STEEL ROUND TO SPECN. BS-970, PT.I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18.5 +1.00 MM DIA. IN STRAIGHT LENGTH OF 2 TO 3.5 MTRS. R Estab
2) AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 20 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS Description : AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 20 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS() Specification : AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 20 + 0.08/-0.13MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS R Estab
3) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS SIZE 10 MM DIA WITHOUT PGG Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS SIZE 10 MM DIA WITHOUT PGG() Specification : ALUMINIUM ALLOY ROUNDS TO SPECN. IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS , SIZE : 10+/-0.1 MM DIA WITHOUT PGG. R Estab
4) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 12 MM DIA WITHOUT PGG Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 12 MM DIA WITHOUT PGG() Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG. R Estab
5) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 14POINT 5 MM DIA WITHOUT PGG Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 14POINT 5 MM DIA WITHOUT PGG() Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG. R Estab
6) BRASS ROD BS2874 1969 CZ124 COND 1 by 2 H OR BS 2872 1969 CZ123 SIZE DIA 18 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH Description : BRASS ROD BS2874 1969 CZ124 COND 1 by 2 H OR BS 2872 1969 CZ123 SIZE DIA 18 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH() Specification : BRASS ROD BS2874:1969 CZ124 COND 1/2 H OR BS 2872:1969 CZ123 SIZE : DIA 18 -0.07 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH. R Estab
7) ALUMINIUM ALLOY ROD TO SPECN IS 733 1983 REAFFERMED 2006 GR 24345 IN WP COND SIZE 10 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1 POINT 5 METERS Description : ALUMINIUM ALLOY ROD TO SPECN IS 733 1983 REAFFERMED 2006 GR 24345 IN WP COND SIZE 10 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1 POINT 5 METERS() Specification : ALUMINIUM ALLOY ROD TO SPECN.IS:733-1983 REAFFERMED 2006 GR. 24345 IN WP COND. WITH MECH.PROPERTIES RM-40 KGF/SQ.MM(MIN) RP 0.2-28 KGF/SQ.MM (MIN) A5-10 MIN SIZE:10 +/- 0.1MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1MM MAXIMU R Estab
Category : ddp
Grade : 1
Size : S
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316 Description : 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316() Specification : 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316 R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND 32 MM DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD Description : STEEL ROUND 32 MM DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD() Specification : STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW D R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION Description : COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION() Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT R Estab
Category : s
Grade : 3
Size : S
82 UNITED COMPOSHEETS PRIVATE LIMITED
KH NO. 122/16/2, 1ST FLOOR SANT NAGAR VILLAGE BURARI Delhi
PIN1 : 110084
Phone No. : 2675388
GSTIN : 09AAACU4787D1Z4 		MRTU00062G

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) TRACK LINK DRG NO 172 55 012 TRACK T 90 ITEM CODE 6120100128[61]() Specification : TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
2) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]() Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS C Nonestab
3) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]() Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
4) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]() Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS C Nonestab
Category : ddp
Grade : 3
Size : S
83 N. K. JAIN INSTRUMENTS Pvt. Ltd.
15, Industrial Estate, Ambala Cantt., Haryana
PIN1 : 133006
Phone No. : 0171-2699315
GSTIN : 06AAACN5500F1Z0 		RTKM02981G

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) LENSES & PRISMS() As per relevant supply order R Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH[26]() Specification : SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH C Nonestab
2) SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET.[26]() Specification : SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET. C Nonestab
3) RETICLE OPTICAL INSTRUMENT FOR BINO 8X30R DRG. NO. MCT-3278/1[74]() Specification : RETICLE OPTICAL INSTRUMENT FOR BINO 8X30R DRG. NO. MCT-3278/1 C Nonestab
Category : p
Grade : Grade I
Size : S
84 MARK ENGINEERING
A-1, Ist Cross Main Road, Ambattur Industrial Estate Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26245971
GSTIN : 33AAPFM9569H1ZM 		AAPFM9569H

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) HALF LOOP Description : HALF LOOP TO DRG NO.20-01-136() Specification : HALF LOOP TO DRG NO.20-01-136 C Estab
Category : ddp
Grade : 3
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) MOUNTING OF FUEL FILTER ASSY[62]() Specification : MOUNTING OF FUEL FILTER ASSY TO DRG NO.SB 329-75-1 C Estab
2) REGULATOR LEVER[62]() Specification : REGULATOR LEVER TO DRG NO.SB 315-777-2 C Estab
3) DELIVERY VALVE ASSY[62]() Specification : DELIVERY VALVE ASSY TO DRG NO.SB 327-59-11 C Estab
4) PUMP ELEMENT[62]() Specification : PUMP ELEMENT TO DRG NO.SB 327-07-11 C Estab
Category :
Grade : Grade III
Size : S
85 Engineers Enterprises
PLOT NO. 349/2, G.E. ROAD, GRAM-PARRIKALA RAJNANDGAON, (CHHATISGARH)
PIN1 : 491441
Phone No. : 07744-220083, MOB.NO. 093014 25000
GSTIN : 22ACJPJ0329A1ZF 		JBPN00638B

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Machining of 25LBS Bomb Body() As per Specification & Drg. C Not Established
Category : DP
Grade : III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) CENTRIFUGAL CASTING OF NON FERROUS ITEMS() AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS C NOT ESTAB.
2) STATIC CASTINS OF NON-FERROUS ITEMS() AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS C NOT ESTAB.
3) GLOBOIDAL WORM WHEEL & WORM PINION() AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS C NOT ESTAB.
4) BLAST HOLE DRILL() AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS C NOT ESTAB.
5) RODS & REPAIRING OF HEMM SPARES() AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS C NOT ESTAB.
Category : DP
Grade : III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) ROD JACKET, ( CASTING) TO DRG.NO. GCF TM-0001(C).REF DRG NO 2A26-08-38.[90]() Specification : ROD JACKET, ( CASTING) TO DRG.NO. GCF TM-0001(C).REF DRG NO 2A26-08-38. R Nonestab
Category : DP
Grade : III
Size :
1) Gun Carriage Factory
Name Specification Use Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]() Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985. R Nonestab
2) CASTING OF FRONT BUSH 2A46M 109 40[90]() Specification : CASTING OF FRONT BUSH 2A46M 109 40 C Nonestab
3) P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]() Specification : P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985 R Nonestab
4) BUSHING REAR CENTRIFUGAL CASTING[90]() Specification : BUSHING REAR CENTRIFUGAL CASTING C Nonestab
5) BUSHING FRONT DRG 2A26 09 22[90]() Specification : BUSHING FRONT DRG 2A26 09 22 C Nonestab
6) AL BRONZE ROUND BAR 70 MM DIA x 500 MM LONG[90]() Specification : AL.BRONZE ROUND BAR 70 MM DIA X 500 MM LONG R Nonestab
7) AL BRONZE ROUND BAR 75 MM DIA X 500 MM LONG[90]() Specification : AL BRONZE ROUND BAR 75 MM DIA X 500 MM LONG R Nonestab
8) 0720201100 PB ROUND 100MM DIA TO SPECIFICATION IS 28 1985 GRII CONTINOUS CAST IN LENGTH OF 1 METRES OR ITS MULTIPLE LENGTH[70]() Specification : 0720201100 P.B.ROUND 100MM DIA.TO SPECN.IS:28-1985-GRII(CONTINOUS-CAST) IN LENGTH OF 1.00 METRES OR ITS MULTIPLE LENGTH R Nonestab
9) PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003[90]() Specification : PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003 C Nonestab
10) 0725577121 PB HOLLOW BAR 135MM OD X 95MM ID IS 28 1985 GRADE 2 CONTINUOUS CAST[70]() Specification : 0725577121 PB HOLLOW BAR 135MM O/D X 95MM I/D IS:28-1985 GRADE 2 CONTINUOUS CAST R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) AL BRONZE ROD OF DIFFERENT SIZE Description : AL BRONZE ROD OF DIFFERENT SIZE() Specification : BS:2874 GD.CA 104 M CONDITION/REQD.SPEC. R Estab
2) Copper & Copper based alloys Description : Copper & Copper based alloys() Specification : As per GCF Drg / Size/Specn R Estab
3) Casting of Non Ferrous Components from 5 kg to 100 kgs. Description : Casting of Non Ferrous Components from 5 kg to 100 kgs.() Specification : As per drawing/specification. C Estab
Category : p
Grade : 3
Size : S
86 Ophal Optronics India Priavte Limited
No. 265, Sector 21A, Faridabad Sector 21A Faridabad Haryana
PIN1 : 121001
Phone No. : 4150412
GSTIN : 06AADCO2780M1Z5 		RTKO02692E

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) LF 7440207336 FOR SUP IR15 300[74]() Specification : 1.4X EXTENDER FOR SUP IR15-300 Drg No.1.4X EXTENDER FOR SUP IR15-300 1.4X EXTENDER FOR SUP IR 15-30 0 MM F/4 MOTORIZED CONTINUOUS ZOOM LENS C Nonestab
Category :
Grade : Grade III
Size : S
87 Shanti Metalfab Pvt. Ltd.
73, NAGALWADI, NEAR AMAR NAGAR, HINGNA INDUSTRIAL AREA, NAGPUR (MAHARASHTRA)
PIN1 : 440016
Phone No. : 07104-649001, 649002
GSTIN : 27AADCS5065R1ZN 		NGPS02782D

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Tail Unit Assyembly for 100/120 Kgs.() As per Specification & Drg. C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE (9911358269)() ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 DTD. 20/12/94 C NOT ESTABLISHED
2) SWITCH NO. 6 EMPTY ASSY. OF 8 COMPONENTS (9911358008)() DRG.NO. D.D(L)-15270 DC NO. 36836-A DT. 14/6/02 EXCEPT EXCEPT SUB ASSEMBLY 2719 C Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) CARRIER AMMUNITION 13 A (STEEL)() DRG. NO. ISV-488 A, SPECN. IS : 168-1993 C Estab.
2) AMMUNITION CONTAINER BOX C-43A(STEEL)() DRG. NO. ISV-529 A, SPECN. NO. IA 1169(N) C Estab.
3) CONTAINER() DRG. NO. 4-24929 INDEX NO. 3 RK 33 C Estab.
4) AMMUNITION CONTAINER BOX (STEEL) M 35 A() DRG. NO. ISV-571 A C Estab.
5) AMMUNITION CONTAINER BOX C 51 A (STEEL) FOR PACKING OF 125 MM HE() DRG. NO. ISV-572 A C Estab.
6) AMMUNITION CONTAINER BOX C 52 A (STEEL) FOR PACKING OF 125 MM HEAT() DRG. NO. ISV-573 A C Estab.
7) AMMUNITION CONTAINER BOX C 53 A (STEEL) FOR PACKING OF 130 MM HEAT() DRG. NO. ISV 573 A C Estab.
Category : DP
Grade : II
Size : M
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263 Description : SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263() Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Insulated Water tank S.S inner, Fuel tank assy. complete, Air tank consisting of 8 items() As per specification/ Drg. C Established
2) Assy. & Mtg. of 2 KL Water Bowser() As per specification/ Drg. c Not Estab.
3) Assy. spare wheel lifting unit complete including handle & rope LPTA-V350-2541-0026(V3)() As per specification / Drawings C Non Established
4) Assy.& mtg.of 5KL Water Bowser() As per specification / Drawings E Non Established
5) Assy. MTG Spare Wheel Carrier-261440300004-V5() As per specification/Drg. C Non Established
6) U-Bolt with Nut-2614-7080-3201(V2)() As per specification/Drg. C Non Established
7) Stud Front-215470618801N() As per specification/Drg. C Non Established
8) Stud for Water Tank Assy.-261470618801() As per specification/Drg. C Non Established
9) Stud Rear-215470618802N() As per specification/Drg. C Non Established
10) PackingU-ClampConsisting of 3items:-PackingU-Clamp(Taper)-000891-0598J-02Nos.,() As per specification/Drg. C Non Established
11) PackingU-Clamp with Slot-000891-0298J(V1)-02,PackingU-Clamp(Plain)-VFJ/16/01/000514() As per specification/Drg. C Non Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) CARRIER 7A/L() IA 1169(n) DC No. 35576-A DT 08.09.93 E NOT ESTAB.
2) BOX H5A() IA 1169(n) DC No. 35576-A DT 08.09.93 E NOT ESTAB.
Category : P
Grade : II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Metallic Container For M4A2() CQA(A) Drg,No. 13979-0-0 R Estab.
2) Metallic Container For Charge 8&9() Drg. No. CQA/AMMN/4085561 and Specn. No. IA - 1169 ( n) R Estab.
3) Cylinder 443 MK 1/L Galvanised Steel,Sheet Type,Deep Drawing Designation GPD() IS-277:2003 & Drg. No. OFBA/CX/51 R ESTD
4) Box C-27A Tin Plate for Pakage Ammunation 92A() OFBA/NCP/209 R ESTD
5) cylender 12 A Steel for Ammunation Container Assy.117A() CIA/AMN/1833 R NOT ESTD
6) Aluminium Container() OFBA/PETN/23 R NOT ESTD
Category : P
Grade : I
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) box g 70 MK1 LA LF 6570160000 Description : box g 70 MK1 LA LF 6570160000() Specification : BOX G-70 MK1/ LA LF 6570160000 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000) Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)() Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BOX S 4 STEEL DRG NO NAI MB 9154 LF 6570011001 Description : BOX S 4 STEEL DRG NO NAI MB 9154 LF 6570011001() Specification : BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11 R Nonestab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897 Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BOX H-60 MKI (INDIA) Description : BOX H-60 MKI (INDIA)() Specification : BOX H-60 MKI (INDIA) TO DRG.NO. ARM 1253 D-1,REV.NO-6 DT.27.06.96,DRG LIST NO.ARM 1253 SHEET- 1 REVISION NO.7 DT.01.08.96 SHEET-2 REV-5 DT.31.07.96 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) BOX STEEL NO. 1 MK-1 TO HOLD 1 TU TB 250 OR TB 250 MOD-1 Description :BOX STEEL NO. 1 MK-1 TO HOLD 1 TU TB 250 OR TB 250 MOD-1() Specification : DRG NO. ARDE-9501-05 C Estab
Category : dp
Grade : 3
Size : S
88 PRAVIN ENGINEERING WORKS
S.NO.36,GALANDE IND.ESTATE,WADGAONSHERI WADGAONSHERI TO NAGAR ROAD PUNE Maharashtra
PIN1 : 411014
Phone No. : 7972491769
GSTIN : 27ADQPR1932B1ZJ 		ADQPR1932B

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SQUIB HOUSING TO ARDE DRG NO 0901 00 02 01 00 001 00PB Description : SQUIB HOUSING TO ARDE DRG NO 0901 00 02 01 00 001 00PB() Specification : SQUIB HOUSING TO ARDE DRG.NO.0901 00 02 01 00 001 00PB C Estab
Category : p
Grade : 3
Size : S
89 GENERAL ENGINEERING CORPORATION
VISHNU MALATI INDUSTRIAL ESTATE, S.NO. 77/1+2+3, SHIVANE PUNE MAHARASHTRA
PIN1 : 411023
Phone No. : 020-25290526, 25291054 MOB: 9890091451
GSTIN : 27AAMFG2259B1ZJ 		PNEG15367C

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CUP MOULDED WITH PINS & LID PINAKA() DRG.NO.HEMRL/IGN/PINAKA/DRG.006 DET NO.4 DT.11/05/2015 & DRG.NO.HEMRL/IGN/PINAKA/DRG.006, DET.NO.16 DT.11/05/2015. SPECN. HEMRL/IGN/PS-406. C Not Estab.
2) VENTURY ASSEMBLY FOR PARA FLARE() DRG NO OFDR/CT/14/UI A3 (AMDT NO.88 DT 9/5/98) C Not Estab.
3) BURSTER TUBE (STEEL) PARA FLARE RED() DRG.NO.OFDR/CT/19/UI/A-4 (AMDT NO.88 DT.9-5-98) C Not Estab.
4) CONTAINER WITH BASE & LID BUOYANT() DRG NO.OFDR/CT/1/M1/A3 AMDT AND DRG.NO.OFDR/CT/5/M1/A3 SPECN.NO. DGOF/OFDR/008. C Not Estab.
5) BODY ALUMINIUM FOR BOMB PRACTICE 3KG() DRG.NO. ARDE-2155 Shts - 2, SHEET NO.2, AL NO.24/04 DATED 09/9/04. C Not Estab.
6) NOSE ASSEMBLY FOR BOMB PRACTICE 3 KG() DRG.NO.ARDE 2024/DET.1 CONSISTING OF : (1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5 (5)MULTI-TOOTH LOCK WASHER B-6-4 TO C Not Estab.
7) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG() DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90. C Not Estab.
8) ADAPTER NOSE FOR 81MM MK-II abc() DRG NO. ARDE 1965 DET 4 PT.NO. ITV 114 SPECN.CQA(A) 2345 (C) C Not Estab.
9) CONTAINER STAR FOR 81MM MK-II() DRG NO ARDE 1965 DET 12 PT NO ITV 122, C-36047-A DT. 30/11/95 TO SPECN:CQA(A) NO.2345(C) C Not Estab.
10) CUP HALF (ALU) FOR 81MM ILLG MK-II() DRG. NO. ARDE 2222, PT NO. ITV 257 Sht-1 AND DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2 C Not Estab.
11) BODY UPPER FOR 81 MM ILLG. MK-II() DRG NO ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Not Estab.
12) BODY FOR 51 MM ILLG.() DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Not Estab.
13) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.1A () CQA(A) 2328 & CQA(A) 2332 C Not Estab.
14) BASE PLATE FOR BOMB 51MM ILLG.() DRG.NO. ARDE-2064, DET NO.14, PT NO ITV 231 SPECN. CQA(A) 2328 (d) C Not Estab.
15) CUP FOR BOMB 51MM ILLG.() DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Not Estab.
16) SET OF FIVE COMPONENTS UPPER SET OF 51MM ILLG.() CQA(A) 2328 C Not Estab.
17) DELAY TUBE FOR 51MM ILLG.() DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Not Estab.
18) NOSE CAP FOR 51 MM SMOKE() DRG.NO.ARDE-2082 DET.NO.7 PT.NO.ITV-215 SPECN.CQA(A) 2352(d) C Not Estab.
19) BODY EMPTY FOR 51 MM SMOKE() DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPECN.NO.CQA(A) 2352 (d) C Not Estab.
20) TAIL ADAPTER FOR 51 MM SMOKE() DRG.NO.CQA(A)/AMN/2935,DET NO.2 PT.NO.ITV- 274 SPECN. NO.CQA(A) 2352 (d) C Not Estab.
21) CONTAINER FOR 51 MM SMOKE () DRG.NO. CQA(A)/AMN/2935, DET NO.4 PT NO. ITV-275 SPECN. CQA(A) 2352 (d) C Not Estab.
22) COVER FOR 84 MM ILLG.() DRG.NO.F-1301-047932-B DC (I) 34754-A DT.10-11-1989 SPECN.F-1301-903340 C Not Estab.
23) SET OF 8 EMPTY COMPONENTS FOR SHELL 105MM IFG SMK. BE 3A() CQA(A) 4921 C Not Estab.
24) SET OF 8 EMPTY COMPONENTS FOR SHELL 105MM COLOUR SMOKE ORANGE() CQA(A) 2346(c) C Not Estab.
25) SET OF 9 COMPONENTS FOR SHELL 105 MM IFG ILLG. 2A() CQA(A) 4928 C Not Estab.
26) SPRING GUIDE FOR 120MM ILLG.() DRG.NO.ARDE-2011, PT.NO.ITV-140 DET NO 29 MAT. AL. ALLOY IS-738:1994. REAFFIRMED-1999, SPECN.NO.CQA(A) 2321 (b) C Not Estab.
27) STAR HOUSING FOR 120MM ILLG.() DRG. NO. ARDE 2011,DET 13 PT.NO.ITV-144 SPCEN.NO.CQA(A)2321 (b) C Not Estab.
28) WASHER CUPPED FOR 120MM ILLG.() DRG.NO.ARDE-2011 DET. 15, PT.NO.ITV-145 SPECN: NO.CQA (A)2321 (b) C Not Estab.
29) MAIN PARA.HOUSING FOR 120MM ILLG.() DRG.NO.ARDE 2011 DET NO. 19 PART NO. ITV 149 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN. CQA (A) 2321 (b) C Not Estab.
30) RING FOR 120MM ILLG.() DRG. NO. ARDE 2011,DET 24 PART NO.ITV-152 DC (I) 33655-A DATE 12-09-1984 MATL. STEEL TO SPECN. NO. IS: 1570C 40. C Not Estab.
31) DELAY HOLDER FOR 120MM ILLG.() DRG.NO. ARDE 2011 DET 11 PT NO.ITV 153 WITH NUT FOR DEALY HOLDER TO DRG.NO. ARDE 2011 DET 12 PT NO ITV 154 SPECN .NO CQA(A) 2321 (b) C Not Estab.
32) EYE BOLT FOR 120MM ILLG.() DRG.NO.OFDR/FT-464/A4 SPECN.NO. CQA(A) 2321 (b) C Not Estab.
33) COLLAR FOR 120MM ILLG.() DRG.NO.ARDE 2011 DET 8 PT NO. ITV-158 MATERIAL SPECN.IS 1570C-20 SPECN.NO. CQA (A) 2321 (b) C Not Estab.
34) WASHER STAR 32.512 MM 1-1/2" R/G/Y() WASHER STAR SIZE 32.512 MM OD X 9.525 MM ID X 0.508 MM THICK TO DRG.NO. ARM 1463 A 7. C Not Estab.
35) CLOSING CUP FOR 120 MM ILLG.() DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT.06-12-89. C Not Estab.
36) SQUIB FOR SIGNAL FLARE() DRG.NO.NAI(P)188 (PROV) CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG. NO NAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2 (PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (P C Not Estab.
37) STEEEL DISC FOR BUOYANT SMOKE ORANGE() DRG. NO.OFDR/CT/24/A3 (MILD STEEL(ZINC PLATED) (WT.50 GMS + 2.0 GMS) C Not Estab.
Category : P
Grade : III
Size : S
90 TECHNOMARK ENGINEERS,
MPLUN, SHED NO. 03, SECTOR-1, INDUSTRIAL AREA, GOVINDPURA, BHOPAL (MADHYA PRADESH)
PIN1 : 462023
Phone No. : 0755-2600834, MOB.NO. 09826327434
GSTIN : 000023193605933 		AECPT6324A

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Machining of Lifting Plug() As per Drg. & Specification C Not Established
2) Bush of Base Booster Casing() As per Drg. & Specification C Not Established
3) Machining of Cylinder() As per Drg. & Specification C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) DISC FOR C.F.MOTOR[12]() Specification : STEEL MACHINED C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) BUSH[12]() Specification : STEEL MACHINED C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) CHAMBER AFT MOTOR[12]() Specification : STEEL MACHINED C Nonestab
Category : p
Grade : Grade III
Size : S
91 BETHEL ENGINEERING INDUSTRIES
NO. 24, ST. THOMAS STREET, SANTHOSH NAGAR, KANDANCHAVADI CHENNAI Tamil Nadu
PIN1 : 600096
Phone No. : 24960710
GSTIN : 33AAEPI6079D1ZX 		CHEG10666F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD REAR LEFT HAND TO 6206803050[62]() Specification : SHIELD REAR LEFT HAND TO DRG NO. 172.04.198CB C Nonestab
2) SHIELD REAR RIGHT HAND TO 6206803052[62]() Specification : SHIELD REAR RIGHT HAND TO DRG NO.172.04.200CBCB C Nonestab
3) SHIELD HINGED FRONT RIGHT HAND TO 6206803351[62]() Specification : SHIELD HINGED FRONT RIGHT HAND TO DRG NO. 184.04.028CB-1CB C Nonestab
4) SHIELD HINGED FRONT LEFT HAND TO 6206803352[62]() Specification : SHIELD HINGED FRONT LEFT HAND TO DRG NO. 184.04.029CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) THIRD UPPER RIGHT HAND STRAP ASSY TO 6201004017[62]() Specification : 184.04.013CBCB C Nonestab
2) FOURTH RIGHT HAND STRAP ASSY TO 6201004018[62]() Specification : 184.04.014CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD THIRD LEFT HAND TO 6206803011[62]() Specification : SHIELD THIRD LEFT HAND TO DRG NO. 172.04.101CB-1 C Nonestab
2) SHIELD 2ND UPPER LEFT HAND TO 6206803017[62]() Specification : SHIELD 2ND UPPER LEFT HAND TO DRG NO. 172.04.131CB-A C Nonestab
3) SHIELD 2ND UPPER RIGHT HAND TO 6206803018[62]() Specification : SHIELD 2ND UPPER RIGHT HAND TO DRG NO. 172.04.132CB-A C Nonestab
4) SHIELD 4TH UPPER LEFT HAND TO 6206803037[62]() Specification : SHIELD 4TH UPPER LEFT HAND TO DRG NO. 172.04.160CB-A C Nonestab
5) SHIELD 1ST UPPER LEFT HAND TO 6206803024[62]() Specification : SHIELD 1ST UPPER LEFT HAND TO DRG NO. 172.04.144CB-A C Nonestab
6) SHIELD 3RD UPPER RIGHT HAND TO 6206803014[62]() Specification : SHIELD 3RD UPPER RIGHT HAND TO DRG NO. 172.04.107CB-A C Nonestab
7) SHIELD 3RD UPPER LEFT HAND TO 6206803013[62]() Specification : SHIELD 3RD UPPER LEFT HAND TO DRG NO. 172.04.106CB-2 C Nonestab
8) SHIELD 3RD RIGHT HAND TO 6206803012[62]() Specification : SHIELD 3RD RIGHT HAND TO DRG NO. 172.04.102CB-1 C Nonestab
9) SHIELD 4TH UPPER RIGHT HAND TO 6206803038[62]() Specification : SHIELD 4TH UPPER RIGHT HAND TO DRG NO. 172.04.161CB-A C Nonestab
10) FOURTH RIGHT HAND SHIELD ASSY TO 6206803023[62]() Specification : FOURTH RIGHT HAND SHIELD ASSY TO DRG NO. 172.04.138CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PLATE SPRING TO 6206401218[62]() Specification : PLATE SPRING TO DRG NO. 432.40.254 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FENCE TO 6206109006[62]() Specification : FENCE TO DRG NO. 172.11.026CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LINK BELT FOR CARTRIDGE 12 7 MM TO 6201000274[62]() Specification : LINK BELT FOR CARTRIDGE 12.7 MM TO DRG NO. 6L19CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PANEL ALINGMENT STAND ASSY TO LF NO 6201095068[62]() Specification : AS PER VQC ATTACHED HEREWITH E Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) CLAMP TO LF NO 6206008293[62]() Specification : As per VQC attached herewith. E Nonestab
2) CLAMP TO LF NO 6206008438[62]() Specification : As per VQC attached herewith. E Nonestab
3) CLAMP TO LF NO 6206008501[62]() Specification : As per VQC attached herewith. E Nonestab
4) BOSS TO LF NO 6206305002[62]() Specification : As per VQC attached herewith. E Nonestab
5) RING TO LF NO 6206008561[62]() Specification : As per VQC attached herewith. E Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FRONT LEFT FENDER TO LF 6206803189[62]() Specification : As per drg C Nonestab
2) LEFT MIDDLE FENDER TO LF NO 6206803226[62]() Specification : AS PER DRG C Nonestab
3) LEFT REAR FENDER TO LF NO 6206803227[62]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) GUARD TO LF NO 6206109021[62]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET ASSY TO 6201015010[62]() Specification : BRACKET ASSY TO DRG NO. 188.15.018CB-3CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ASSY TANK OIL EXTERNALLY MOUNTED TO 6206305031[62]() Specification : ASSY TANK OIL EXTERNALLY MOUNTED TO DRG NO. 175.33.012CB-1ACB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FLAP RIGHT HAND 028CB[62]() Specification : FLAP RIGHT HAND E Nonestab
Category :
Grade : Grade III
Size : S
92 DHRUV CONTAINERS PVT. LTD.
27/A, NAGALWADI, NEAR MIDC INDUSTRIAL AREA, NAGPUR (MAHARASHTRA)
PIN1 : 440016
Phone No. : 07104-645354
GSTIN : 27AABCD3717B1Z6 		NGPD00328G

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Tail Unit Assyembly 100-120 kgs() As per Drg. & Specification C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) AMMN. CONTAINER BOX C- 51A (STEEL) FOR PACKING OF 125 MM . HE() DRG. NO. ISV - 572 A C Estab.
2) AMMUNITION CONTAINER BOX C- 52A (STEEL) FOR PACKING OF 125MM HEAT() DRG. NO. ISV - 573 A C Estab.
3) AMMN. CONTAINER BOX C- 53A (STEEL) FOR PACKING OF 130 MM AMMN.() DRG. NO. ISV - 574 A C Estab.
4) AMMUNITION CONTAINER BOX C-43A (STEEL )() DRG. NO. ISV - 529 A C Estab.
5) AMMN. CONTAINER BOX M- 35 A (STEEL)() DRG. NO. ISV - 571 A C Estab.
6) BOX 8A PLYWOOD FOR MINE A/T 4D ND (BAR MINE)() DRG. NO. ISV - 429 A C Estab.
7) CARRIER AMMN. 13 A (STEEL)() DRG. NO. ISV - 488 A C Estab.
8) CONTAINER RK-33() DRG. NO. 4-24929 INDEX NO. 3 C Estab.
9) CYLINDER 239 MK 5/L FOR PACKING OF AMMN. ROCKET 68 MM HE() DRG. NO. SV - 55 A C Estab.
Category : DP
Grade : II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Load body complete LPTA & STLN-257470912701& B6510604C-1() As per specification / Drawings C Not Estab.
2) Floor Assy. LPTA &STLN -2611 5601B& Drg.No. 20703701/TSS() As per specification / Drawings C Not Estab.
3) Radiator mtg. Frame- 2069540000153() As per specification / Drawings C Not Estab.
4) Tail lamp bkt. (RH/LH)-9110296001000() As per specification / Drawings C Not Estab.
5) Assy. Cross Tube- 206489100118() As per specification / Drawings C Not Estab.
6) Insulated Water Tank S/S inner-9113114016000() As per specification / Drawings C Not Estab.
7) Fuel Tank-215447500102() As per specification / Drawings C Not Estab.
8) 5th Cross Member - 263631208201() As per specification / Drawings C Not Estab.
9) Engine Cross member-219831200106() As per specification / Drawings C Not Estab.
10) Assy. Air Tank Complete -21984300101() As per specification / Drawings C Not Estab.
11) 2KL S.S. water Bowser- 9113107471000() As per specification / Drawings E Not Estab.
12) 5 KL Water Bowser - () As per specification / Drawings C Non Established
13) Assy. MTG Spare Wheel Carrier-261440300004-V5() As per specification / Drawings C Non Established
14) Assy. Spare Wheel Lifting Unit-V350-2541-0026(V3)() As per specification / Drawings C Non Established
15) U-Bolt With Nut-2614-7080-3201(V2)() As per specification / Drawings C Non Established
16) Stud Front-215470618801N() As per specification / Drawings C Non Established
17) Stud for Water Tank Assy.-2614 7061 8801() As per specification / Drawings C Non Established
18) Stud Rear-215470618802N() As per specification / Drawings C Non Established
19) PackingU-ClampConsisting of 3items:-PackingU-Clamp(Taper)-000891-0598J-02Nos.,() As per specification / Drawings C Non Established
20) PackingU-ClampwithSlot-000891-0298J(V1)-02,PackingU-Clamp(plain)-VFJ/16/01/000514() As per specification / Drawings C Non Established
Category : P
Grade : III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MINE APM 16 A1 CONSISTING OF (1) BODY LOADING ASSY. (2) CONTAINER ASSY. (3) SPOOL ASSY.() CQA(A) 1804 C Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) CARRIER 7A/L() IA 1169(n)DC 35576-A Dt 08.09.93 E Not Estab.
2) BOX H5A() IA 1169(n)DC 35576-A Dt 08.09.93 E Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) box g 70 MK1 LA LF 6570160000 Description : box g 70 MK1 LA LF 6570160000() Specification : BOX G-70 MK1/ LA LF 6570160000 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000) Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)() Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BOX S 4 STEEL DRG NO NAI MB 9154 LF 6570011001 Description : BOX S 4 STEEL DRG NO NAI MB 9154 LF 6570011001() Specification : BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11 R Nonestab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) NOTCHED COIL TO ARDE 1933 PT ITV169() Specification : CQA (A) 2322 R Estab
2) BOX STEEL NO. S 6 MK1 DRG.ARDE 2225() Specification : DRG. NO. ARDE 2225 SHEET NO.3 R Estab
3) BOX NO. 582 MK-1() Specification : IA-1163 R Estab
4) CYLINDER 4A DESIGN CIA AMN 54() Specification : SPECN IA-1163 (1), DC 35592A R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) NOTCHED COIL Description : NOTCHED COIL() Specification : ARDE 1933 PART ITV-169 DETAIL NO. 3, DC.36529-A, DT.06.03.2008 C Estab
2) BOX H-60 MKI (INDIA) Description : BOX H-60 MKI (INDIA)() Specification : DRG.NO. ARM 1253 D-1,REV.NO-6 DT.27.06.96,DRG LIST NO.ARM 1253 SHEET- 1 REVISION NO.7 DT.01.08.96 SHEET-2 REV-5 DT.31.07.96 C Estab
3) CONTAINER 3 RK-33 Description : CONTAINER 3 RK-33() Specification : DRG.NO. 4-24929/3 RK 33/000, DC NO. 36434-A, DT-6.7.98, CONSISTING OF THE FOLLOWING ITEMS. (1) BODY TO DRG. NO. 4-24929/3 K33/010 (2) COVER TO DRG. NO. 4-24929/3 K33/020 DC 35604-A (3) BOLT TO DRG. NO. 4-24929/3 K33/030 (4) FORK TO DRG. N C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Butt Assembly DSCAT No.- 1005-000835 Description : Butt Assembly DSCAT No.- 1005-000835() Specification : AS PER DRG. C Estab
2) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE() Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided C Estab
3) 1.BIPOD ASSY. To DS CAT NO. 1005-557897 Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897() Specification : AS PER DRG. C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C Description : BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) STEEL CONTAINER IN FC Description :STEEL CONTAINER IN FC() Specification : AS PER DRAWING C Estab
3) COMPLETE BOX STEEL NO 1 MK 1 Description : COMPLETE BOX STEEL NO 1 MK 1() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C Description : BOX N-34 MK-2 EMPTY (ALUMINIUM) IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) STEEL CONTAINER IN FC Description :STEEL CONTAINER IN FC() Specification : AS PER DRAWING C Estab
3) COMPLETE BOX STEEL NO 1 MK 1 Description : COMPLETE BOX STEEL NO 1 MK 1() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C Description : BOX N-34 MK-2 (ALUMINIUM) FOR IN F.C() Specification : AS PER OFDC SPECIFICATION C Estab
2) COMPLETE BOX STEEL NO 1 MK 1 TO HOLD 1 TAIL UNIT NO TB 250 OR TAIL UNIT TB 250 MOD 1 IN FINISHED CONDITION Description : BOX STEEL NO 1 MK 1 TO HOLD 1 TAIL UNIT NO TB 250 OR TAIL UNIT TB 250 MOD 1 IN FINISHED CONDITION() Specification : DRG.NO.[ARDE 9501-05 SHT.1/3 & SHT.2/3 WITH DC "ISSUE A" DT-10-03- 05 & SHT.3/3 WITH DC AL. NO.07/2008.DT.31-01-08.IN FINISHED CONDITION C Estab
3) STEEL CONTAINER FOR TU 1111 IN FC Description :STEEL CONTAINER FOR TU 1111 IN FC() Specification : DRG NO. ARM 1519 C Estab
Category : dp
Grade : 3
Size : S
93 Tiki Tar Industries Baroda Limited
8th Floor, Neptune Tower, Productivity Road Vadodara - 390 007. Gujarat
PIN1 : 390007
Phone No. : 2337862
GSTIN : 24AADCT8382Q1ZK 		AADCT8382Q

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513 Description : PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513() Specification : PITCH COAL TAR SOFT-MEDIUM TYPE TO SPECN: JSS-5610-02:2014 (REV. NO. 4) DC NO. 5245-ME DT 18/06/2014 R Estab
Category : p
Grade : 3
Size : S
94 YOUNGMAN WOOLLEN MILLS PVT LTD
VILLAGE SSERA RAHON ROAD Ludhiana Punjab
PIN1 : 141007
Phone No. : 2690116
GSTIN : 03AAACY0912G1ZV 		AAACY0912G

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Double Layer bonded Polyester Fleece White 150 cm width[21]() Specification : IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) INNER LINING KNITTED FABRIC OUTER JACKET POLYESTER 145 GSM WIDTH 150 CM MIN[21]() Specification : INNER LINING KNITTED FABRIC (OUTER JACKET) POLYESTER 145 GSM WIDTH 150 CM. (MIN.) PANTONE SHADE NO. 19-0516 TPX SPECIFICATION :- AS PER APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) 100 Percent Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min[21]() Specification : 100% Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min specification :-Appendix "B" of Provisional Specification No. S/2594/C/CCWDCP/TC-15(a). Pantone Shade No 19-55513 TPX R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Polyester fleece fabric knitted O G 150 cm min[21]() Specification : SPECN: AS PER APPENDIX 'C' OF PROV. SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG (Imp)RELEVANT CLAUSE OF SPECIFICATION NO. IND/TC/1208 AS PER SPECIFICATION NO. IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : M
95 PEMRAJ INDUSTRIES
1194/18 a krishnanand bulding ghole road near icici bank 1194/18 a krishnanand bulding, ghole road near icici bank pune Maharashtra
PIN1 : 411005
Phone No. : 25535663
GSTIN : 27AAOPD8572G1ZD 		AAOPD8572G

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF ALUMINIUM ALLOY 33 POINT 5 Description : CONVERSION OF ALUMINIUM ALLOY 33 POINT 5() Specification : CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE - 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D Description : CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D() Specification : CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D C Estab
Category : dp
Grade : 3
Size : S
96 WOOD PRESERVERS PVT. LTD.
F-27/2, MIDC INDUSTRIAL AREA, HINGA ROAD, NAGPUR (MAHARASHTRA)
PIN1 : 440016
Phone No. : 07104-237210, 237451, MOB.NO.9823278224
GSTIN : 27AAACW1675L1ZY 		NGPW00127B

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Tail Unit Assyembly 100-120 kgs() As per Drg. & Specification C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Box H 33 MKI IN Empty Wood[65]() Specification : Box H-33 MKI (IN), Empty (Wood) To Drg. No. NAD 4289/2 ARD 2399 DT. 4/12/09 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) STEEL BOX H-60 MK 1 [62]() Specification : DRAWING NO.ARM-1253 D1.(WITH FITMENTS). C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SUPPORT WOODEN [62]() Specification : DRG.NO.ARDE 2148 (ISSUE I) DET-2. SPECN IND/ ME 883 (E) (PROV), COMMERCIAL GRADES C Nonestab
2) BOX N-18 MK-1(WOOD) TO HOLD 2 MARKER SMOKE A/S WHITE OR YELLOW [65]() Specification : DRG.NO.NAD 4392, SHEET-1 OF 2 SHEETS C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER BOX-B9A (STEEL)[65]() Specification : IA 1169 (n) DRG. NO. ARDE-2174, SHEET NO. 3, PT. NO. ISV 553A DC-35907A R Nonestab
2) GENERATOR SMOKE NO. 5 MK-1 (EMPTY)[60]() Specification : DRG. NO. ARM 1023 D2 SPECN. NO. DTD & P (AIR) 207/ARM C Nonestab
3) BOX STEEL C-239[62]() Specification : DRG NO. ARDE 2148 DET NO. 6, AL.NO. 20/2008 DT.31/7/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOX STEEL C-239[62]() Specification : DRG NO. ARDE 2148 DET NO. 6, AL.NO. 20/2008 DT.31/7/2008 C Nonestab
2) CARRIER AMMN 16A FOR 81MM ILLG MK-II[62]() Specification : SPECN. NO. IA 1169 (n) DRG NO. ARDE 2224 SHEET NO. 2 PT NO ISV 550A C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Spool Complete assembly ( item no. 18 ) for Flare Trip Wire[64]() Specification : CIA-3807(b) [Drg No.DD(L) 13461-A/1] C Nonestab
2) SUPPORT WOODEN [62]() Specification : DRG.NO.ARDE 2148 (ISSUE I) DET-2. SPECN IND/ ME 883 (E) (PROV), COMMERCIAL GRADES C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]() Specification : DRG.NO. 155-1210 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]() Specification : DRG.NO. 155-1210 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]() Specification : DRG.NO. 155-1210 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CARRIER AMMN 16A (STEEL)[62]() Specification : DRG NO ARDE 2224 SHEET NO. 2 PT NO ISV 550A SPECN NO IA 1169 (n) C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER BOX B 9A BRUNSWICK GREEN FOR PACKING OF BOMB 51MM SMOKE[65]() Specification : DRG.NO. ARDE-2174, SHEET NO.3,PT.NO.ISV 553A DC-35907A DT.09/02/1995 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Ammn. Container Box B9A Steel (O.G.) for Packing of Bomb 51mm Illg./Red/Green[65]() Specification : DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) AMMUNITION CONTAINER 75A (ASSY)[65]() Specification : DRG. NO. CQA/AMN/3259 PART NO. ISV 583A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF PLYWOOD PACKING FITMENTS FOR BOX C 43 A[65]() Specification : DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) AMMN. CONTAINER BOX C-44A(STEEL)() DRG. NO. CQA(A)AMN/2644 PART NO.ISV-530A, DC:37249-A, DT.08.3.10 SPECN:IA-1169(n), DC NO:35576-A, PAINTED OLIVE GREEN ISC NO: 220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012. C Not Estab.
2) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET () DRG. NO:155-1000(M) (UNIT LOAD) CONSISTING OF PALLET TO DRG. NO.155-1210(M), FRAME ASSEMBLY TO DRG. NO.155-1230(M) DC NO.37126-A, DT.25.7.07. C Not Estab.
Category : P
Grade : III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOX S 2 MK1 WOODEN FOR 76 2 NAV AMN LF 6580255000[65]() Specification : BOX WOOD NO. S2 MK-1 (IN) TO HOLD 3 CARTRIDGES QF 76.2MM PRACTICE SHELL WITH PLUG REPRESENTING FUZE OR PLUGGED HE/PREFRAGMENTED SHELL TO DRAWING NO.ARDE-2077 DT.19NOV10 3SHTSSHT NO.1.R.NO.1 DT.09/12/87 AND SHT NO.3 R NO.2 DT.29/05/89 R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) CENTER PARTITION() As Per GCF Drg./ Requirements & Specifications C Not Established
2) BOTTOM SUPPORT PIECE() As Per GCF Drg./ Requirements & Specifications C Not Established
3) BRACKET A-1() As Per GCF Drg./ Requirements & Specifications C Not Established
4) BRACKET B-1() As Per GCF Drg./ Requirements & Specifications C Not Established
5) BRACKET B-2() As Per GCF Drg./ Requirements & Specifications C Not Established
Category : P
Grade : II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) WOODEN CRATE[65]() Specification : OFN/BMCS/M-92/WOODEN CRATE C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) AMMUNITION CONTAINER BOX F2A L F 9911356419 Description : AMMUNITION CONTAINER BOX F2A L F 9911356419() Specification : AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALP R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CRATE 12A WOODEN ISV-483A (HEAT/TPT (6574370000)[65]() Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM I C Estab
2) BOX S-4 STEEL DRG NO.NAI(MB)9154 (6570011001)[65]() Specification : BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11 C Nonestab
3) BOX M-167 MK-2/L (WOOD) ISV/96-A (6570512000)[66]() Specification : AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN C Estab
4) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]() Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALP C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CRATE 12A WOODEN ISV-483A (HEAT/TPT (6574370000)[65]() Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM C Estab
2) BOX S-4 STEEL DRG NO.NAI(MB)9154 (6570011001)[65]() Specification : BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11 C Nonestab
3) BOX M-167 MK-2/L (WOOD) ISV/96-A (6570512000)[66]() Specification : AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN C Estab
4) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]() Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOX 520:9 EMPTY ASSY DRG TRD 222169 (9911357802)[99]() Specification : R Estab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) THREE TYPES OF ELEMENT FILTERS[06]() Specification : As per Specification / Drg R Nonestab
2) BOX FOR DRIVERS NIGHT VISION DEVICE ASSY[06]() Specification : As per Specification / Drg R Nonestab
3) EXPANSION TANK ASSY[06]() Specification : As per Specification / Drg R Nonestab
4) Box Assy[06]() Specification : Drg No.175.91.090CB-A R Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000) Description : BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)() Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) TIMBER M H C PLANKS 2255055300 Description : TIMBER M H C PLANKS 2255055300() Specification : TIMBER MANGO/HOLLOCK/CHAPLAS PLANKS KILN SEASONED & PRESSURE TREATED UNPLAND OR ANY OTHER SPECIES COVERED BY THE SPEC:- IND/ME/883 (f) (PROV) DC NO 3539-ME DT 24/10/98 SIZE 52MM X 152MM X 1.6M LONG R Estab
Category : p
Grade : 3
Size : S
1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Wooden Packing Box for 100-120 Kgs Aerial Bomb to Drg.No.KHPK-410026(Amended)GIF-SK-2257 for 100-120 Description : Wooden Packing Box for 100-120 Kgs Aerial Bomb to Drg.No.KHPK-410026(Amended)GIF-SK-2257 for 100-120() Specification : As per Drg. & Specification R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS Description : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS() Specification : DRG. PT. NO. ISV 587A, DC. 37127-A DT. 30.07.2007 C Estab
2) TIN BOX FOR STORAGE OF DETONATOR AND CAPS Description : TIN BOX FOR STORAGE OF DETONATOR AND CAPS() Specification : DRG. NO. OFBL/MISC/U-03/96 C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD TO DRG NO 04-44-79000-() Specification : AS PER AFK SPECN. R Estab
2) TIM MANGO 50.8X50.8MMX1.219MTR UP() Specification : IND/ME/883 (f) (PROV) DC 3754-ME. R Estab
3) AMMUNITION CONTAINER M31-A,CQA/AMN/2870() Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) Wooden Packing Box for Warhead as per Drg No FS 2435 C[00]() Specification : Wooden Packing Box for Warhead as per Drg. No. FS-2435 C E Nonestab
2) Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C[00]() Specification : Wooden Packing Box for Propulsion Unit as per Drg. No. FS-2436 C E Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]() Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF C Estab
2) TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD[70]() Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD C Estab
3) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]() Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW C Estab
4) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Estab
5) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]() Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER C Estab
6) BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB[70]() Specification : BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB C Estab
7) PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2[70]() Specification : PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2 C Estab
Category : p
Grade : Grade III
Size : S
97 DYNAMIC FLOW PRODUCTS PVT.LTD.
UNIT NO.1,2,5, SAMIULLAH KHAN COMPOUND VAKANPAD PELHAR Maharashtra
PIN1 : 401208
Phone No. : 9322599811
GSTIN : 27AACCD3013F1Z8 		MUMD13438F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) TORSION BAR FORGING 3991051007[39]() Specification : AS PER DG C Nonestab
2) SHAFT TORSION FORGING 3996411023[39]() Specification : AS PER VQC C Nonestab
Category :
Grade : Grade III
Size : M
98 GBS INDUSTRIES,
W-82, Hingna MIDC, Nagpur-440016 Hingna MIDC Nagpur Maharashtra
PIN1 : 440016
Phone No. : 9827003726
GSTIN : 27AAOFG6529J1ZV 		AAOFG6529J

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Machining of 25LBS Bomb Body() As per Drg. & Specification C Not Established
2) Nose Adapter Bush() As per Drg. & Specification C Not Established
3) Base Adapter Bush() As per Drg. & Specification C Not Established
4) Machining of Cylinder() As per Drg. & Specification C Not Established
5) Bush of Base Booster Casing() As per Drg. & Specification C Not Established
6) Adapter Bush() As per Drg. & Specification C Not Established
7) Machining of Lifting Plug() As per Drg. & Specification C Not Established
Category : DP
Grade : I,II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) BUSH OF BASE BOOSTER CASING TO DRG NO AAIW BS 0072 2A[08]() Specification : A) COMPONENT WILL BE SUPPLIED BY THE FIRM WITH FIRM MATERIAL B) MATERIAL TEST CERTIFICATE FROM NABL ACCREDIATED LAB SHOULD BE SENT ALONG WITH COMPONENTS. C) INSPECTION BY AAIW, KHAMARIA OR HIS AUTHORIZED REPRESENTATIVE. C Nonestab
Category : DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name Specification Use Status
1) STD CASSETTE CONTAINER[42]() Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) SPECIAL CASSETTE CONTAINER[42]() Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Nonestab
2) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]() Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM. C Nonestab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUP YA 5 FOR A30 T DET[65]() Specification : CUP YA-5 FOR A30-T(DET) TO DRG NO. FOR PRIMER DETONATOR A-30-T CQA(A)/AMMN/2856, DC NO-37271.A DT. 08.11.10 SCANNED ON DT DT. 05.01.2011 C Nonestab
2) CAP KG 4 FOR A30 T DETONATOR[65]() Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90 Description : BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90() Specification : BOLT,ECCENTRIC ASSY CAT PART NO.14/5306-003416 TO CQA(EE) DRG.CAT.NO.1189K DT.9/4/90 . C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156250 TUBE DELAY(4 SECOND) PT.DRG.IQX 943[61]() Specification : TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011 C Nonestab
2) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]() Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14. C Nonestab
3) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]() Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL C Nonestab
4) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]() Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM. C Nonestab
5) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
6) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 P Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
3) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
3) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
4) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]() Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED)[62]() Specification : GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417[00]() Specification : ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417[00]() Specification : ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417 C Nonestab
2) LOADING BEAM ASSEMBLY HD SYSTEM TO DRG NO ADRDE 1405 6245141405[62]() Specification : LOADING BEAM ASSEMBLY HD SYSTEM TO DRG. NO. ADRDE-1405 C Nonestab
3) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]() Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM. C Nonestab
4) ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG NO ADRDE 1403 02 6245141403[62]() Specification : ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG. NO. ADRDE-1403-02 C Nonestab
5) BRACKET MIDDLE TO DRG NO ADRDE 1403 01 01 08A 6245141411[62]() Specification : BRACKET MIDDLE TO DRG NO ADRDE-1403-01-01-08A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL R Nonestab
2) 6432300008 MS PLATE 3MM TH PHOS ERA[64]() Specification : IS:2062-1994 C Nonestab
3) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
4) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
5) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Nonestab
6) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
7) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]() Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008 C Nonestab
8) 6432420001 LEG ASSY DRG ITX 46 SA[64]() Specification : LEG ASSEMBLY TO DESIGNER'S REF. NO. ARDE-1521, DRG.PART NO. ITX-46 SA DC NO. 35824-A. R Nonestab
9) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
10) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451100 SADDLE ASSLY FOR CHARGE 145 MM[63]() Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV. 00 OF 09/2008. C Nonestab
2) 6334402000 MS BLOCK FOR PROFING HDC I AND II[63]() Specification : M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B C Nonestab
3) 6334401100 SET A FOR HDC I CONSISTING OF 4 NOS[63]() Specification : SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL/ C Nonestab
4) 6334402200 SET A FOR HDC II CONSISTING OF 5[63]() Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/117 C Nonestab
5) 6334401200 SET B SADDLE ASSY CONSIST 4 HDC I[63]() Specification : SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 10 C Nonestab
6) 6334402300 SET B SADDLE ASSY FOR HDC II CON 4[63]() Specification : SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM[01]() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030123 ERA MOUNTING PLATE ASSY STD[01]() Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES C Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]() Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES C Nonestab
Category : p
Grade : Grade III
Size : S
99 GLOBAL TRADING CORPORATION (PRINCIPAL MANUFACTURER: M/S CLASSIC & CO., DIST. HOWRAH)
45, TOLLYGUNGE CIRCULAR ROAD, 2ND FLOOR, KOLKATA, WESTBENGAL
PIN1 : 700053
Phone No. : 033-2400 0388 FAX: 033-2400 0399
GSTIN : 19ACHPJ1415F1Z1 		CALG04531C

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE (9911358269)() ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 DTD. 20/12/94 C NOT ESTABLISHED
Category : S
Grade : II
Size : O
1) Ordnance Equipment Factory
Name Specification Use Status
1) STUD RUBBER TO DRG. PT. NO. 1656 ISV (OEF DRAWING NO. SK-938)() AS PER REQUIREMENT & SPECIFICATION R
2) RUBBER STUD ROUND BLACK() AS PER REQUIREMENT & SPECIFICATION R
Category : S
Grade : III
Size : O
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6572672227 CROSS LINKED POLYTHENE FOAM DISC[65]() Specification : DISC,FELT MATL.: CROSS LINKED POLYTHENE FOAM TO DRG. NO. ARDE 1203, DETAIL NO. 11, SIZE 69.0 MM DIA X 19 MM R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6356000017 LLDPE PACKAGE BOX FOR INFLUENCE MINE MK II EMPTY ASSEMBLY TO ARDE DRG NO 9707 00 04 00 00 000 00TA AS PER QAP NO NFM IMMK II PKG 02[63]() Specification : LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02 E Nonestab
2) 6570250311 FOAM PACKING FITMENT IN BOX M32[65]() Specification : FOAM PACKING FITMENTS IN WOODEN BOX M32 FOR MODULAR CHARGE350 GM AS PER DRG NO FQ/XIV/015 DATED 06/07/2021 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]() Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Estab
2) SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL E Estab
3) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]() Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL C Estab
4) TRANSIT CASE TO DRG NO 30041 ST 2 REQ FOR AMR[70]() Specification : AS PER OFB REQ E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]() Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
3) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
4) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE[63]() Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999. C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) PLASTIC CONTAINER -120MM FSAPDS[20]() Specification : AS PER DRAWING. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772 Description : DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772() Specification : DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6333501102 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236 R Nonestab
2) 6333501101 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235 R Nonestab
3) 6504300006 RETAINER[65]() Specification : RETAINER TO DRG. NO. 9102 00 01 00 01 003 00TB FOR 30 MM GRENADE RUDRA AGS-17 C Nonestab
4) 6331401018 CATCH LOCKING TO DRG NO 1A 793 AND PART NO ISV 1A[63]() Specification : CATCH LOCKING TO DRG NO. 1A 793 AND PART NO. ISV 1A C Nonestab
5) 6333501016 PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV 7[63]() Specification : HOOK TO DRG NO 1A 793 TO PART NO ISV 7 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) FLOOR BOARD FRP IN 3 PARTS[9911037589]() Specification : IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]() Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103789155 POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I SIZE 200 MM X 0 076 MM THICK TO SPECN NO JSS 9330 03 2014 REV 03[21]() Specification : POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I,SIZE 200 MMX 0.076 MM THICK TO SPECN. NO. JSS 9330-03:2014 (REV.03) C Nonestab
2) 6331431101 BOTTOM AND TOP PACKING SHEET TO SPECN HEMRL DRG HE CAST 086DET 02 CHARGE HOLDING TRAY[63]() Specification : BOTTOM & TOP PACKING SHEET TO SPECN. HEMRL DRG HE/CAST 086DET-02, CHARGE HOLDING TRAY(SUB ASSLY) TO SPECN HEMRL DRG HE/CAST 086 DET-03 SADDLE HOLDING TRAY TO SPECN.HEMRL DRG.HE/CAST 086 DET-09 MATL:ALL ABOVE ITEMS IS MADE BY EXPANDEDLINKE C Nonestab
3) 6570250501 ANTISTATIC POLYPROPYLENE IMPACT CO POLYMER CORRUGATED SHEET PPCS ANNULAR DIS DIA 128 MM X 06 MM SPECIFICATION OFCH SPECN PP 102 DRG NO FQ CA V 131 A[65]() Specification : ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A C Nonestab
4) 6334401041 BLACK CUSHION FOR HDC1 TO DRG NO HEMRL MICS SK NO 1470[63]() Specification : SPECN IND/ME/1023 (PROV) R Nonestab
5) 6570250318 PACKING FITMENT FOAM SIZE 938 X 170X 13 MM[65]() Specification : SPECN CROSS LINK POLYTHENE FOAM DENSITY 60-80 KG/M3 FOAM 1250 LAST 2 PKG. R Nonestab
Category :
Grade : Grade III
Size : S
100 BSL Limited
26, Industrial Area, Gandhi Nagar, Bhilwara Rajasthan
PIN1 : 311001
Phone No. : 01482-246801, 9352111287, 9114112191
GSTIN : 08AABCB0639G1ZZ 		CALB05106D

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) CAMBRIC COTTON WHITE 91 CMS. () IND/TC/0015 (c) R
2) CANVAS COTTON 410 GRM KHAKI 91 CMS.() IS: 1424-1983 V. N0. 4 R
3) CANVAS COTTON 410 GMS. O.G. WP 91 CMS.() IS: 1424-1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972. R Established
4) CANVAS COTTON 545 GMS. SCOURED 91 CMS.() IS: 1424 (VARIETY NO. 3) & MODIFICATION AS PER ANNX. "A" R Established
5) CANVAS COTTON 680 GMS. O.G 91 CMS.() IS: 1424 (VARIETY NO. 2) & IS: 6803FORWTPRF.MODIFICATION AS PER ANNX. "A" R Established
6) CANVAS COTTON 815 GMS. O.G W.P. 91 CMS.() IS: 1424-1983 (VARIETY NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Established
7) CLOTH CALICO COTTON KHAKI 91 CMS.() IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R Established
8) CLOTH CALICO COTTON WHITE 91 CMS.() IS: 5088-1982 (V.NO.3) R Established
9) CLOTH CALICO COTTON WHITE BLEACHED 91 CMS.() IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Established
10) CLOTH CANVAS COTTON 545 GRMS. O.G W.P. 91 CMS. WIDE() IS: 1424-1983 (V.NO.3) AND WATER PROOFNESS TO IS : 6803-1972 R Established
11) CLOTH CANVAS COTTON 680 GR. OG WP 91 CMS.() IS: 1424-1983 (V.NO.2) REAFMD.1995 & WATERPROOFNESS TO IS: 6803 R Established
12) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CM WIDE() IS: 2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95 R Established
13) CLOTH COTTON CANVAS 410 GMS. KHAKI 91 CMS.() IS: 1424-1983 VARIETY NO.4 DULY FLAME PROOFED R Established
14) CLOTH COTTON CLOSELY WOVEN 170 GM WHITE WR 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
15) CLOTH COTTON CLOSELY WOVEN 170 GMS. SAND COLOUR W.R. 91 CMS.() JSS: 8305-5-2000 V.NO. "A" (SHADE NO. 388 OF IS:5) R Established
16) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.() JSS: 8305-5-2000 VARIETY NO. "A" R Established
17) CLOTH COTTON CLOSELY WOVEN 170 GRM DUAL SHADE (OG/ WHITE) WR 91 CMS.() JSS: 8305-5-2000 (FIRST REVISION) R Established
18) CLOTH COTTON CLOSELY WOVEN 235 GRMS. DUAL SHADE (WHITE/OG) W.R. 91 CMS() JSS: 8305-5-2000 (REV.NO. 1) VARIETY "B" R Established
19) CLOTH COTTON CLOSELY WOVEN 310 GM W.R. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
20) CLOTH COTTON DOSUTIE BLUE 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
21) CLOTH COTTON DOSUTIE KHAKI 91 CMS WIDE() IS: 179-1977 (REAFF. 1997) EDITION 3.5 (1998-05) V.NO.4 R Established
22) CLOTH COTTON DOSUTIE O.G. 91 CMS WIDE() IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Established
23) CLOTH COTTON DOSUTIE SCOURED 91CM.() IS: 179-1977 VARIETY NO. 4 R Established
24) CLOTH COTTON DOSUTIE GREEN 91CMS WIDE() IS: 179-1977 V.NO. 4 REAFFIRMED 1997 EDITION 3.5 (1998-05) R Established
25) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1) R Established
26) CLOTH COTTON O.G. W.R.375 GR. FOR CAPES 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. "A" R Established
27) CLOTH COTTON OG WATER REPELENT FOR CAPES WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 95 (V.NO.1) R Established
28) CLOTH DRILL COTTON O.G. 142 CMS.() IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Established
29) CLOTH DRILL COTTON O.G. 91 CMS WIDE PROOFED() IS: 5088 PT.-II LATEST R Established
30) CLOTH DRILL COTTON O.G.142 CMS.() IS: 177-1989 (4th REVISION) REAFFIRMED 1997 V.NO. 3 R Established
31) CLOTH DRILL COTTON WHITE BLEACHED 142 CM V.NO 3.() IS: 177-1989 V.NO.3 R Established
32) CLOTH DUCK COTTON 610 GR. SCOURED 91 CM. WIDE() IS: 1422-1983(V.NO.2) REAFF. 2000 WITH AMDT.NO.1 R Established
33) CLOTH DUCK COTTON 340 GMS O.G. 91 CMS.() IS: 1422 V.NO.4 & MODIFICATION AS PER ANNX. A R Established
34) CLOTH DUCK COTTON 340 GMS O.G. WP 91 CMS() IS: 1422-1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972 R Established
35) CLOTH DUCK COTTON 340 GMS SCOURED 91 CMS() IS: 1422-1983 (V.NO 4) REAFF. 2000 WITH AMDT.NO.1 OF APR., 87 R Established
36) CLOTH DUCK COTTON 340 GMS. SCOURED W.P.--91.4 CM.() IS: 1422-1983 VARIETY NO.4, IS: 6803 LATEST FOR WATER PROOFNESS R Established
37) CLOTH DUCK COTTON 475 GMS. O.G. 91 CMS() IS: 1422-1983 (V.NO.3)REAFFIRMED 2000 WITH AMDT.NO.1 OF APRIL R Established
38) CLOTH DUCK COTTON 475 GMS. O.G. W.P 91 CMVAT DYED() IS: 1422-1983 (V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
39) CLOTH DUCK COTTON 475 GMS SCOURED 91 CMS() IS: 1422-1983 V. NO 3 R Established
40) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS() IS: 1422-1983 V.NO. 3 WATER PROOFNESS TO IS: 6803 LATEST R Established
41) CLOTH DUCK COTTON 475 GMS UNDYED 91 CMS() IS: 1422 V.NO.3 & MODIFICATION AS PER ANNX. A R Established
42) CLOTH DUCK COTTON 475 GR KHAKI 91 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
43) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.() IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT R Established
44) CLOTH DUCK COTTON 475 O.G W.P.AND RP 91 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
45) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS() IS: 1422-1983 V.NO. 2 R Established
46) CLOTH DUCK COTTON 610 GMS. KHAKI W.P. 91 CM.() IS: 1422-1983 V.NO. 2 R Established
47) CLOTH DUCK COTTON 610 GR. KHAKI W.P 76 CM WIDE() IS: 1422-1983 (V.NO.2) (REAFF. 2000) WITH AMDT.NO.1 OF APRIL R Established
48) CLOTH DUCK COTTON 610 GMS. SCOURED W.P. R.P. 91 CMS. WIDE() IS: 1422-1983 V. NO 2 WATER PROOFNESS TO IS: 6803 LATEST R Established
49) CLOTH DUCK COTTON 745 GMS. O.G. W.P. 91 CMS() IS: 1422-1983 (V.NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Established
50) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.() IS: 13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
51) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 91 CM.() IS:13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
52) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. OG WP 135 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
53) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS.O.G.91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
54) CLOTH DUCK POLYSTER/COTTON RIP STOP FABRIC (HEAVY) O.G. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
55) CLOTH DUCK RIP STOP COTTON 610 GMS O.G. W.P. 135 CMS. WIDE() IND/TC/0145 R Established
56) CLOTH DUCK RIP STOP COTTON 610 GRM O.G. W.P. 91 CMS. WIDE() IND/TC/0145 R Established
57) CLOTH MUSLIN WHITE BLEACHED 91 CMS. WIDE() IND/TC/0002(j) R Established
58) CLOTH PLAIN WEAVE POLYESTER & COTTON KHAKI 137 CMS.() OEFC/01/PCK/ 2003 R Established
59) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
60) CLOTH PLAIN WEAVE POLYESTER VISOCOSE DOPE DYED KHAKI WIDTH 138 CMS.() OEFC/01/PCK/ 2003 R Established
61) COTTON DOSUTIE WHITE BLEACHED 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
62) COTTON FABRIC S.D. PARA SCOURED 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
63) COTTON FABRIC SCOURED FOR S.D. PARACHUTE TYPE-I 91 CMS.() IS: 2970-1987 (REAFF. 1999) (FIRST REV.) R Established
64) DRILL COTTON WHITE BLEACHED 91 CMS.() IS: 177-1977 R Established
65) DUCK COTTON 476 GMS. SULPHAR KHAKI 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
66) DUCK COTTON 610 GMS O.G. W.P. 91 CMS.() IS: 1422-1983 (V.NO.2), REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
67) DUCK POLYESTER/COTTON BLENDED RIP STOP OGWP 91 CMS. WIDE VARIETY NO.1 WITH FIRE RETARDANT TREATMEN() AS PER REQUIREMENT & SPECIFICATION R Established
68) DUCK POLYESTER/COTTON BLENDED RIP STOP (MADE FROM-RING SPUN YARN) OG WP ROT PROOFWITH FIRE RETARDANT() IS: 13510-2000 RING SPUN YARN (V.NO.1) MASS R Established
69) FABRIC COTTON CLOSELY WOVEN 235 GR. BLACK WR 91 CMS.() JSS: 8305-5 R Established
70) FABRIC COTTON CLOSELY WOVEN 235 GRMS BLACK 91 CM WIDE, VAT DYED() JSS: 8305-5 (APRIL, 80) EXCEPT THAT SHADE WHICH WILL BE BLACK R Established
71) FABRIC COTTON CLOSELY WOVEN 237 GRMS. BLACK 91 CMS WIDE() JSS: 8305-5 EXCEPT WL. SHADE WHICH SHALL BE BLACK R Established
72) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPES WATER PROOF 76 CMS.() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST, 1995 VR.NO.1 R Established
73) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
74) FABRIC COTTON O.G.W.R. FOR CAPS WP 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
75) FABRIC COTTON O.G.WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
76) FABRIC COTTON OG WATER REPELLENT FOR CAPES WATER PROOF 76 CMS.() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 1995 VR.NO.1 R Established
77) FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CM.() IS: 2422 VERIETY 4 R Established
78) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.() PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Established
79) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148CMS() PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Established
80) LONG CLOTH COTTON KHAKI 91 CM() IS: 187-1987 (V. NO.1) EXCEPT THAT (1) IN APPEARANCE SHADE R Established
81) LONG CLOTH COTTON WHITE BLEACHED 91 CMS() IS: 187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 R Established
82) LONG CLOTH RED 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
83) LONG CLOTH YELLOW 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
84) CLOTH COTTON SCOURED W.R. FOR CAPES. 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. A R Established
85) CLOTH DUCK O.G. RIP STOP 50:50 POLYSTER :COTTON BLEND IN 700 GRM./SQ.MTR.,W.P., R.P. 91 CMS WIDE() SUPPLY BY DMSRDE R Established
86) CLOTH DUCK OG RIP STOP 50:50 POLYSTER:COTTON BLEND, IN 400 GRM/SQ.MTR. W.P. R.P., 91 CMS. WIDE() SUPPLY BY DMSRDE R Established
87) CLOTH MAZARI LIGHT 142 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
88) DUCK POLYESTER/ COTTON BLENDED, RIP STOP (MADE FROM - RING SPUN YARN) OG WP ROT PROOF, VARIETY NO.1,() IS: 13510-2000 RING SPUN YARN (V. NO.1) MASS R Established
89) FABRIC COTTON 125 GSM SKY BLUE 155 CMS. WIDE() AS PER TABLE-2 OF SPECN.NO. AIR HQ/JDQAS/OK-004 R Established
90) FABRIC COTTON 50 GM OG 100 CMS. WIDE() DMSRDE/T&GS/97/415/TEX-4/3(b) R Established
Category : DP
Grade : I
Size : L