2) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
3) HAMMER TO DRG. NO: F-1312-190230 IN FINISHED CONDITION[71]()
Specification : AS PER DRAWING
C
Nonestab
4) LEVER SEAR TO DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL[70]()
Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL
C
Nonestab
5) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION.[70]()
Specification : AS PER DRG & SPECIFICATION
C
Nonestab
6) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]()
Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL
C
Nonestab
7) EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
8) BUSH TO DRG NO 9-A-621.05.016[72]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709[63]()
Specification : BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709,
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER CTM 0174[70]()
Specification : HAMMER IN F/C AS PER DRG. NO. CTM-0174
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTING RING FRONT IN F C FOR TU -1111
Description : SUPPORTING RING FRONT IN F C FOR TU -1111()
Specification : DET.8 TO DRG NO.ARDE-2139
C
Estab
2) SUPPORTING RING (LARGE) FOR BTU 450 (2211) IN F.C.
Description : SUPPORTING RING LARGE FOR BTU 450()
Specification : DRG NO- SK 2923 SHEET NO 4
C
Estab
3) SUPPORTING RING (MEDIUM) IN F.C. FOR BTU 450
Description : SUPPORTING RING (MEDIUM) FOR BTU-450 (2211) IN F.C.()
Specification : DRG NO- SK-2923
C
Estab
4) END COVER IN F C FOR TU-1111
Description : END COVER IN F C FOR TU-1111()
Specification : DET.10 TO DRG NO.ARDE-2139
C
Estab
5) RIB ASSY.FRONT IN F C FOR TU-1111
Description : RIB ASSY.FRONT IN F C FOR TU-1111()
Specification : DET.11 TO DRG NO.ARDE-2139
C
Estab
6) RIB ASSY.MIDDLE IN F C FOR TU-1111
Description : RIB ASSY.MIDDLE IN F C FOR TU-1111()
Specification : DET.11 TO DRG.NO.ARDE-2139
C
Estab
7) RIB ASSY.REAR IN F C FOR TU -1111
Description : RIB ASSY.REAR IN F C FOR TU -1111()
Specification : DET.11 TO DRG NO. ARDE-2139
C
Estab
8) LUG ANCHORING ASSY.IN F C FOR TU-1111
Description : LUG ANCHORING ASSY.IN F C FOR TU-1111()
Specification : DET.69 TO DRG NO.ARDE-2139
C
Estab
9) .Spring Return in F C for TU-1111.
Description : .Spring Return in F C for TU-1111.()
Specification : Det-49 to Drg No.ARDE-2139(Issue-1)
C
Estab
10) WASHER FRONT FOR TU 1111 IN F.C.
Description : WASHER FRONT FOR TU 1111()
Specification : DRG NO- ARDE 2139 DET NO-21
C
Estab
11) BRACKET FOR RETURN SPRING IN F C FOR TU-1111
Description : BRACKET FOR RETURN SPRING IN F C FOR TU-1111()
Specification : DET.32 TO DRG NO.ARDE-2139
C
Estab
12) STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111
Description : STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111()
Specification : DET.33 TO DRG NO.ARDE-2139
C
Estab
13) PLUNGER ASSY.IN F C FOR TU-1111
Description : PLUNGER ASSY.IN F C FOR TU-1111()
Specification : DET.35 TO DRG NO.ARDE-2139
C
Estab
14) Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139
Description : Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139()
Specification : Det-45 to Drg No.ARDE-2139
C
Estab
15) WASHER IN FC FOR TU-1111
Description : WASHER IN FC FOR TU-1111()
Specification : DET NO.50 TO DRG.NO ARDE-2139
C
Estab
16) TAB WASHER IN F C FOR TU-1111
Description : TAB WASHER IN F C FOR TU-1111()
Specification : DET.51 TO DRG.NO.ARDE-2139
C
Estab
17) VANE SPINDLE ASSY IN F C FOR TU-1111
Description : VANE SPINDLE ASSY IN F C FOR TU-1111()
Specification : DET.52 TO DRG NO. ARDE-2139
C
Estab
18) ADAPTER BLANKING FOR TU-1111
Description : ADAPTER BLANKING FOR TU-1111()
Specification : DRG.NO.ARDE-2139 DET. NO.58 IN F.C
C
Estab
19) Clip Retaining in F C for TU-1111.
Description : Clip Retaining in F C for TU-1111.()
Specification : Det-62 to Drg No.ARDE-2139
C
Estab
20) PIN VANE FOR TAIL UNIT 1111 IN F.C.
Description : PIN VANE FOR TAIL UNIT 1111()
Specification : DRG.NO.ARDE 2139, DET.NO.61
C
Estab
21) PIVOT LEVER LOCKING FOR TAIL UNIT -1111 IN F.C.
Description : PIVOT LEVER LOCKING FOR TAIL UNIT -1111()
Specification : DRG.NO.ARDE 2139, DET.NO.48
C
Estab
22) CONE RING REAR IN FC FOR TR 250
Description : CONE RING REAR IN FC FOR TR 250()
Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C
C
Estab
23) COLLER IN F C FOR TU -1111
Description : COLLER IN F C FOR TU -1111()
Specification : DRG.NO.ARDE-2139 DET.26
C
Estab
24) LOCATING PIN FOR TU 1111 IN F.C.
Description : LOCATING PIN FOR TU 1111()
Specification : DRG NO- ARDE 2139 DET 6 SHT 3
C
Estab
25) SUPPORT WASHER FOR TU1111 IN F.C.
Description : SUPPORT WASHER FOR TU1111()
Specification : DRG.NO. ARDE 2139 DET.NO.24
C
Estab
26) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111
Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111()
Specification : DET.57 SHT.3 TO DRG NO.ARDE-2139
C
Estab
27) HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111 IN F.C.
Description : HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111()
Specification : DRG.NO.ARDE 2139, DET.NO.67
C
Estab
28) CLOSING DISC ASSY IN FC FOR RTU 1121
Description : CLOSING DISC ASSY IN FC FOR RTU 1121()
Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Estab
29) HOUSING BLOCK AND CLEVIES FOR RTU 1121 (ANCHORING MECHANISM)
Description : HOUSING BLOCK AND CLEVIES FOR RTU 1121()
Specification : HOUSING BLOCK AND CLEVIS UNIT ASSY.(ANCHORING MECHANISM) DET NO-1 TO DRG.NO.ARDE-1947,SPECN.NO.ARDE/SPECN/500 IN FINISHED CONDITION
C
Estab
30) CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450)
Description : CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450)()
Specification : DET.39 TO DRG NO.ARDE-2121
C
Estab
31) Spring Return in F C for Tail Unit 2211(BTU-450).
Description : Spring Return in F C for Tail Unit 2211(BTU-450).()
Specification : Det.4 to Drg No.ARDE-2121
C
Estab
32) PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450)
Description : PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450)()
Specification : DET.38 TO DRG NO.2121
C
Estab
33) Pin Spindle Locking in F C for Tail Unit (BTU-450).
Description : Pin Spindle Locking in F C for Tail Unit (BTU-450).()
Specification : Det.47 to Drg No.ARDE-2121
C
Estab
34) END COVER WELDING SUB ASSY. FOR BTU-450 IN F.C.
Description : END COVER WELDING SUB ASSY. FOR BTU-450()
Specification : DET-1, SHT-10, ARDE-2121
C
Estab
35) VANE SPINDLE FOR BTU-450 IN F.C.
Description : VANE SPINDLE FOR BTU-450()
Specification : DET-32, ARDE-2121
C
Estab
36) PIVOT LEVER LOCKING ASSY FOR BTU-450
Description : PIVOT LEVER LOCKING ASSY FOR BTU-450 IN F.C.()
Specification : DET-7, ARDE-2121
C
Estab
37) PLUNGER ASSY FOR BTU-450 IN F.C.
Description : PLUNGER ASSY FOR BTU-450()
Specification : DET-21,ARDE-2121
C
Estab
38) Tab Washer in F C for Tail Unit (BTU-450)
Description : Tab Washer in F C for Tail Unit (BTU-450)()
Specification : Det.50 to Drg No.ARDE-2121
C
Estab
39) COLLAR IN F C FOR TAIL UNIT (BTU-450)
Description : COLLAR IN F C FOR TAIL UNIT (BTU-450)()
Specification : DET.17 TO DRG NO.ARDE-2121
C
Estab
40) PIN IN F C FOR TAIL UNIT (BTU -450)
Description : PIN IN F C FOR TAIL UNIT (BTU -450)()
Specification : DET.18 TO DRG NO. ARDE-2121
C
Estab
41) Stopper for Lever Locking in F C for Tail Unit (BTU-450)
Description : Stopper for Lever Locking in F C for Tail Unit (BTU-450)()
Specification : Det.5 to Drg No.ARDE-2121
C
Estab
42) Lever Locking Assy. in F C for Tail Unit (BTU-450
Description : Lever Locking Assy. in F C for Tail Unit (BTU-450()
Specification : Det.8 Sht-1 to Drg No.ARDE-2121
C
Estab
43) ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450)
Description : ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450)()
Specification : DET.44 TO DRG NO. ARDE-2121
C
Estab
44) HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450)
Description : HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450)()
Specification : DRG.NO.ARDE-2121 DET.48
C
Estab
45) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450)
Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450)()
Specification : DRG.NO.ARDE-2121 DET.52 SHT.-3
C
Estab
46) LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450)
Description : LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450)()
55) Flexible Drive Adopter in F C for TU TB 250
Description : Flexible Drive Adopter in F C for TU TB 250()
Specification : Det.12 to Drg No.ARDE-9501-03
C
Estab
56) ARMING WIRE GUIDE FOR TAIL UNIT TB 250 IN F.C.
Description : ARMING WIRE GUIDE FOR TAIL UNIT TB 250()
Specification : DRG NO- ARDE9501-03 DET NO- 37
C
Estab
57) END COVER FOR BTU-250 IN F C()
Specification : DRG NO.ARDE-9501-03 DET 7
C
Estab
58) ASSY OF ADAPTOR AND CONE SPIDER IN FC FOR ADAPTOR TU-37 MK-II
Description : ASSY OF ADAPTOR AND CONE SPIDER IN FC FOR ADAPTOR TU-37 MK-II()
Specification : OFDC SK.NO.2903
C
Estab
59) ARMING SPINDLE FOR BTU 450
Description : ARMING SPINDLE FOR BTU 450()
Specification : DET- 34, ARDE-2121
C
Estab
60) PLUG I IN F C FOR PLUG-I
Description : PLUG I IN F C FOR PLUG-I()
Specification : DRG.PT.NO.ITV-164
C
Estab
61) Plug II to in F C.
Description : Plug II to in F C.()
Specification : Drg.Pt.No.ITV-165
C
Estab
62) TRACER NUT IN FC
Description : TRACER NUT IN FC()
Specification : DRG.NO.4-025998 DET 036
C
Estab
63) WIND SHIELD FOR FUZE DA 5A
Description : WIND SHIELD FOR FUZE DA 5A()
Specification : DRG.Pt.NO.IQX-1010
C
Estab
64) SAFETY CLIP NO. 1
Description : SAFETY CLIP NO.1 MK-1 (HARD)SEC REF. NO. 312G/1483 DET NO FOR KIT ARMING & FUZING()
Specification : AS PER DRAWING
C
Estab
65) DETENT FOR FUZE 162 WITH OFDC MATERIAL
Description : DETENT FOR FUZE 162 WITH OFDC MATERIAL()
Specification : DRG.PT.NO.QX-356
C
Estab
66) TAG, PIN & WASHER ASSEMBLY IN FC WITH OFDC MATL. FOR FUZE DA5A
Description : TAG, PIN & WASHER ASSEMBLY IN FC WITH OFDC MATL. FOR FUZE DA5A()
Specification : DRG PT NO IQX-101
C
Estab
67) CLIP FOR FUZE 162
Description : CLIP FOR FUZE 162()
Specification : DRG.PT.NO.439
C
Estab
68) CDSC 0.5KG MK NI(IN) BODY & LID IN FC FOR CDSC
Description : CDSC 0.5KG MK NI(IN) BODY & LID IN FC FOR CDSC()
Specification : DRG.NO.SK-172(b)
C
Estab
69) CONE RING ASSEMBLY OFDC SK NO. 2420 IN F.C.()
Specification : AS PER DRAWING
C
Estab
70) FIN ASSY FOR BTU -450
Description : FIN ASSY FOR BTU -450()
Specification : AS PER OFDC SPECIFICATION
C
Estab
71) CONE RING AS PER DRG NO. OFDC SK NO. 2916 SHEET 7 IN F.C. Description : CONE RING()
Specification : AS PER DRAWING
C
Estab
72) SUPPORTING RING (SMALL) IN F.C. FOR BTU 450
Description : SUPPORTING RING (SMALL) FOR BTU-450 (2211) IN F.C.()
Specification : DRG NO- SK-2923
C
Estab
73) .FIN ASSY DET NO.1 DRG NO. ARDE-2121 IN F.C..()
Specification : AS PER DRAWING
C
Estab
74) HOT ROLLED SHEET PLATE AS PER GOST 14959-1979()
AS PER SPECIFICATION
C
Estab
75) CONE RING & KEY WELDING DET NO 1 IN F.C.()
Specification :AS PER DRAWING
C
Estab
76) FIN ASSY (WELDING) DET NO. 13 IN F.C.()
Specification : AS PER DRAWING
C
Estab
77) STRIKER DRG NO. QX 331IN F.C.()
Specification : AS PER DRAWING
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTING RING FRONT IN F C FOR TU -1111
Description : SUPPORTING RING FRONT IN F C FOR TU -1111()
Specification : DET.8 TO DRG NO.ARDE-2139
C
Estab
2) SUPPORTING RING (LARGE) FOR BTU 450 (2211) IN F.C.
Description : SUPPORTING RING LARGE FOR BTU 450()
Specification : DRG NO- SK 2923 SHEET NO 4
C
Estab
3) SUPPORTING RING (MEDIUM) IN F.C. FOR BTU 450
Description : SUPPORTING RING (MEDIUM) FOR BTU-450 (2211) IN F.C.()
Specification : DRG NO- SK-2923
C
Estab
4) END COVER IN F C FOR TU-1111
Description : END COVER IN F C FOR TU-1111()
Specification : DET.10 TO DRG NO.ARDE-2139
C
Estab
5) RIB ASSY.FRONT IN F C FOR TU-1111
Description : RIB ASSY.FRONT IN F C FOR TU-1111()
Specification : DET.11 TO DRG NO.ARDE-2139
C
Estab
6) RIB ASSY.MIDDLE IN F C FOR TU-1111
Description : RIB ASSY.MIDDLE IN F C FOR TU-1111()
Specification : DET.11 TO DRG.NO.ARDE-2139
C
Estab
7) RIB ASSY.REAR IN F C FOR TU -1111
Description : RIB ASSY.REAR IN F C FOR TU -1111()
Specification : DET.11 TO DRG NO. ARDE-2139
C
Estab
8) LUG ANCHORING ASSY.IN F C FOR TU-1111
Description : LUG ANCHORING ASSY.IN F C FOR TU-1111()
Specification : DET.69 TO DRG NO.ARDE-2139
C
Estab
9) .Spring Return in F C for TU-1111.
Description : .Spring Return in F C for TU-1111.()
Specification : Det-49 to Drg No.ARDE-2139(Issue-1)
C
Estab
10) WASHER FRONT FOR TU 1111 IN F.C.
Description : WASHER FRONT FOR TU 1111()
Specification : DRG NO- ARDE 2139 DET NO-21
C
Estab
11) BRACKET FOR RETURN SPRING IN F C FOR TU-1111
Description : BRACKET FOR RETURN SPRING IN F C FOR TU-1111()
Specification : DET.32 TO DRG NO.ARDE-2139
C
Estab
12) STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111
Description : STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111()
Specification : DET.33 TO DRG NO.ARDE-2139
C
Estab
13) PLUNGER ASSY.IN F C FOR TU-1111
Description : PLUNGER ASSY.IN F C FOR TU-1111()
Specification : DET.35 TO DRG NO.ARDE-2139
C
Estab
14) Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139
Description : Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139()
Specification : Det-45 to Drg No.ARDE-2139
C
Estab
15) WASHER IN FC FOR TU-1111
Description : WASHER IN FC FOR TU-1111()
Specification : DET NO.50 TO DRG.NO ARDE-2139
C
Estab
16) TAB WASHER IN F C FOR TU-1111
Description : TAB WASHER IN F C FOR TU-1111()
Specification : DET.51 TO DRG.NO.ARDE-2139
C
Estab
17) VANE SPINDLE ASSY IN F C FOR TU-1111
Description : VANE SPINDLE ASSY IN F C FOR TU-1111()
Specification : DET.52 TO DRG NO. ARDE-2139
C
Estab
18) ADAPTER BLANKING FOR TU-1111
Description : ADAPTER BLANKING FOR TU-1111()
Specification : DRG.NO.ARDE-2139 DET. NO.58 IN F.C
C
Estab
19) Clip Retaining in F C for TU-1111.
Description : Clip Retaining in F C for TU-1111.()
Specification : Det-62 to Drg No.ARDE-2139
C
Estab
20) PIN VANE FOR TAIL UNIT 1111 IN F.C.
Description : PIN VANE FOR TAIL UNIT 1111()
Specification : DRG.NO.ARDE 2139, DET.NO.61
C
Estab
21) PIVOT LEVER LOCKING FOR TAIL UNIT -1111 IN F.C.
Description : PIVOT LEVER LOCKING FOR TAIL UNIT -1111()
Specification : DRG.NO.ARDE 2139, DET.NO.48
C
Estab
22) CONE RING REAR IN FC FOR TR 250
Description : CONE RING REAR IN FC FOR TR 250()
Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C
C
Estab
23) COLLER IN F C FOR TU -1111
Description : COLLER IN F C FOR TU -1111()
Specification : DRG.NO.ARDE-2139 DET.26
C
Estab
24) LOCATING PIN FOR TU 1111 IN F.C.
Description : LOCATING PIN FOR TU 1111()
Specification : DRG NO- ARDE 2139 DET 6 SHT 3
C
Estab
25) SUPPORT WASHER FOR TU1111 IN F.C.
Description : SUPPORT WASHER FOR TU1111()
Specification : DRG.NO. ARDE 2139 DET.NO.24
C
Estab
26) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111
Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111()
Specification : DET.57 SHT.3 TO DRG NO.ARDE-2139
C
Estab
27) HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111 IN F.C.
Description : HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111()
Specification : DRG.NO.ARDE 2139, DET.NO.67
C
Estab
28) CLOSING DISC ASSY IN FC FOR RTU 1121
Description : CLOSING DISC ASSY IN FC FOR RTU 1121()
Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Estab
29) HOUSING BLOCK AND CLEVIES FOR RTU 1121 (ANCHORING MECHANISM)
Description : HOUSING BLOCK AND CLEVIES FOR RTU 1121()
Specification : HOUSING BLOCK AND CLEVIS UNIT ASSY.(ANCHORING MECHANISM) DET NO-1 TO DRG.NO.ARDE-1947,SPECN.NO.ARDE/SPECN/500 IN FINISHED CONDITION
C
Estab
30) CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450)
Description : CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450)()
Specification : DET.39 TO DRG NO.ARDE-2121
C
Estab
31) Spring Return in F C for Tail Unit 2211(BTU-450).
Description : Spring Return in F C for Tail Unit 2211(BTU-450).()
Specification : Det.4 to Drg No.ARDE-2121
C
Estab
32) PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450)
Description : PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450)()
Specification : DET.38 TO DRG NO.2121
C
Estab
33) Pin Spindle Locking in F C for Tail Unit (BTU-450).
Description : Pin Spindle Locking in F C for Tail Unit (BTU-450).()
Specification : Det.47 to Drg No.ARDE-2121
C
Estab
34) END COVER WELDING SUB ASSY. FOR BTU-450 IN F.C.
Description : END COVER WELDING SUB ASSY. FOR BTU-450()
Specification : DET-1, SHT-10, ARDE-2121
C
Estab
35) VANE SPINDLE FOR BTU-450 IN F.C.
Description : VANE SPINDLE FOR BTU-450()
Specification : DET-32, ARDE-2121
C
Estab
36) PIVOT LEVER LOCKING ASSY FOR BTU-450
Description : PIVOT LEVER LOCKING ASSY FOR BTU-450 IN F.C.()
Specification : DET-7, ARDE-2121
C
Estab
37) PLUNGER ASSY FOR BTU-450 IN F.C.
Description : PLUNGER ASSY FOR BTU-450()
Specification : DET-21,ARDE-2121
C
Estab
38) Tab Washer in F C for Tail Unit (BTU-450)
Description : Tab Washer in F C for Tail Unit (BTU-450)()
Specification : Det.50 to Drg No.ARDE-2121
C
Estab
39) COLLAR IN F C FOR TAIL UNIT (BTU-450)
Description : COLLAR IN F C FOR TAIL UNIT (BTU-450)()
Specification : DET.17 TO DRG NO.ARDE-2121
C
Estab
40) PIN IN F C FOR TAIL UNIT (BTU -450)
Description : PIN IN F C FOR TAIL UNIT (BTU -450)()
Specification : DET.18 TO DRG NO. ARDE-2121
C
Estab
41) Stopper for Lever Locking in F C for Tail Unit (BTU-450)
Description : Stopper for Lever Locking in F C for Tail Unit (BTU-450)()
Specification : Det.5 to Drg No.ARDE-2121
C
Estab
42) Lever Locking Assy. in F C for Tail Unit (BTU-450
Description : Lever Locking Assy. in F C for Tail Unit (BTU-450()
Specification : Det.8 Sht-1 to Drg No.ARDE-2121
C
Estab
43) ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450)
Description : ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450)()
Specification : DET.44 TO DRG NO. ARDE-2121
C
Estab
44) HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450)
Description : HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450)()
Specification : DRG.NO.ARDE-2121 DET.48
C
Estab
45) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450)
Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450)()
Specification : DRG.NO.ARDE-2121 DET.52 SHT.-3
C
Estab
46) LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450)
Description : LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450)()
1) SAFETY CAP TO DRG NO IQX 14 IN FC WITHOUT PAINTING AND PASSIVATION FOR FUZE 162 MK 9[63]()
Specification : SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9
C
Nonestab
2) SAFETY CAP IN FC MC WITHOUT PAINTING AND PASSIVATION TO DRG NO IAFD 44 PT NO IQX 14 FOR FUZE 162 MK 8[63]()
Specification : SAFETY CAP IN F/C MC WITHOUT PAINTING AND PASSIVATION TO DRG. NO. IAFD-44 PT. NO. IQX-14 DC 35445-A DT 05-02-93 FOR FUZE 162 MK 8
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dumdum
Name
Specification
Use
Status
1) CONE RING IN FINISHED CONDITION FOR TU 1111[62]()
Specification : CONE RING,DET NO-6 SHT-2 TO DRG.NO.ARDE-2139 (ISSUE-I) AL NO. 2/95 DT. 11.01.95 IN FINISHED CONDITION
C
Nonestab
2) CONE RING IN FINISHED CONDITION FOR TU TB 250[62]()
Specification : CONE RING ASSEMBLY' FOR TU TB 250 TO DRG.NO. OFDC SK-2420 IN FINISHED CONDITION
C
Estab
3) FIN ASSY DET NO 1 SHT 7 TO DRG NO ARDE 2121 IN SEMI FINISHED CONDITION UPTO TACK WELDING[62]()
Specification : FIN ASSY.DET NO-1 SHT-7 TO DRG.NO.ARDE-2121 IN SEMI-FINISHED CONDITION UPTO TACK WELDING
C
Estab
4) FIN ASSY WELDING FOR TU 250[62]()
Specification : FIN ASSY. (WELDING) DET. NO.-13,SHT.NO.-1 TO DRG.NO.:ARDE 9501-03 IN FINISHED CONDITION (4 TO A SET).
C
Estab
5) FIN ASSY TO DRG NO ARDE 2139 DET NO 14 WITHOUT PROTECTIVE FINISH FOR TU 1111[62]()
Specification : FIN ASSY.TO DRG. NO. ARDE 2139, DET. NO. 14 WITHOUT PROTECTIVE FINISH
C
Estab
6) CONE RING SMALL FOR RTU 1121[62]()
Specification : CONE RING SMALL DET NO-61 TO DRG.NO.ARDE-1947,AL NO.698 DT. 23.02.93 IN FINISHED CONDITION
C
Estab
7) HOUSING BLOCK AND CLEVIES FOR RTU 1121[62]()
Specification : HOUSING BLOCK AND CLEVIS UNIT ASSY.(ANCHORING MECHANISM) DET NO-1 TO DRG.NO.ARDE-1947,SPECN.NO.ARDE/SPECN/500 IN FINISHED CONDITION
C
Estab
8) CLOSING DISC ASSY IN FC FOR RTU 1121[62]()
Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Nonestab
9) CONE RING LARGE AND PIN LOCKING FOR RTU 1121[62]()
Specification : CONE RING LARGE & PIN LOCATING TU-ASSY. DET NO-62 SHT-1 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Estab
10) CONE RING AND KEY WELDING ASSY FOR BTU 450[62]()
Specification : CONE RING & KEY(WELDING ASSY.)TO DET NO-1 SHT-3 TO DRG.NO. ARDE-2121 IN FINISHED CONDITION
C
Estab
11) CONE RING LARGE AND PIN LOCKING FOR RTU 2231[99]()
Specification : CONE RING LARGE & PIN LOCKETING ASSY.TO DRG. NO. ARDE -2239 DET, NO. 4 IN FINISHED CONDITION
C
Estab
12) CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250[62]()
Specification : CONE RING FRONT ASSY.;DET.NO.:23 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION
C
Estab
13) CONE RING SMALL IN FINISHED CONDITION FOR RTU 2231[62]()
Specification : CONE RING SMALL DET NO-7 TO DRG.NO.ARDE-2239,AL NO.21/97 DT. 20.08.97 IN FINISHED CONDITION
C
Estab
14) CLOSING DISC ASSY IN FINISHED CONDITION FOR RTU 2231[99]()
Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Nonestab
15) CONE RING REAR IN FC FOR TR 250[62]()
Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C
C
Estab
16) CLOSING RING ASSY IN FINISHED CONDITION FOR TR 250[62]()
Specification : CLOSING RING ASSY.;DET.NO.:45 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
262
MARTIN INDUSTRIES PVT. LTD.
21-B, LAKE ROAD, 1ST FLOOR,
GAGAN BUILDING, OPPOSITE CHARU CHANDRA COLLEGE
KOLKATA - 700029 LAKE ROAD KOLKATA West Bengal
PIN1 : 700029
Phone No. : 24638470
GSTIN : 19AAGCM3004M1ZE
DRG.NO.3-026944/53-B-025 Y FOR FUZE B429E.DC-37284A DT.06.07.11
C
Not Estab
3) LEAD RING()
DRG.NO.b III 8.249.034DC NO.36310-A,DT-14.07.97.
C
Not Estab
Category : DDP,DP
Grade : I
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TIN PLATE 510x355x0 30 mm LF 0101029903
Description : TIN PLATE 510x355x0 30 mm LF 0101029903()
Specification : TIN PLATE ELECTROLYTIC CODE E11.2/11.2 SIZE 510MM X 355MM X 0.30MM THICK, TEMPER T57/T61 TO SPECN:IS-1993-1993 (THIRDREVISION) (REAFFIRMED-1998) WITH AMENDMENT NO.1 JULY 2010.
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP (EMPTY) FOR DETONATOR 356 MG[64]()
Specification : CUP (EMPTY) FOR DETONATOR 356 MG TO DRG. NO. QX-803, D. NO. D3(L)3934/F/83, DC NO.36103 A, DT.29.03.96.
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP (EMPTY) FOR DEONATOR 356 MG[64]()
Specification : CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.
C
Nonestab
2) CAP COMPLETE (3 G CAP EMPTY) TO REF. NO.DD(L)17235 FOR CARTG[65]()
Specification : CAP K3-2 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2854, DC NO. 37271-A, DT. 08.11.10. SCANNED ON 05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SHAPING OR BURRS SHO
C
Estab
3) CUP Y1-3
Description : CUP Y1-3()
Specification : CUP Y1-3 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2855, DC NO. 37271-A, DT. 08.11.10. SCANNED ON 05.01.11. HEIGHT SHOULD BE FROM 1.30 MM TO 1.40 MM. OUTSIDE DIAMETER SHOULD BE 2.35 MM TO 2.38 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH,
C
Estab
4) CUP FOR KB 3B DETONATOR EMPTY
Description : CUP FOR KB 3B DETONATOR EMPTY()
Specification : CUP FOR KB 3B DETONATOR EMPTY TO DRG NO. 3-076960/A3-KB-003/1 DCI-37271-A DT.08.11.2010
C
Estab
5) ANVIL TO DRG NO 9 0643
Description : ANVIL TO DRG NO 9 0643()
Specification : ANVIL TO DRG.NO.9-0643/9- -104/3, DC 36309-A, DT.14.7.97.
C
Estab
6) CAP TO DRG NO 9 0643
Description : CAP TO DRG NO 9 0643()
Specification : CAP TO DRG.NO.9-0643/9- -104/1, DC.34183-A, DT-28.7.87.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330604400 HOLDER DELAY FOR FZ B429[63]()
Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429
C
Estab
Category : p
Grade : Grade III
Size :
S
263
EASTERN GLOBAL LTD.
517, CITY CENTER, 5TH FLOOR
THE MALL, KANPUR
THE MALL KANPUR Uttar Pradesh
PIN1 : 208001
Phone No. : 2330149
GSTIN : 09AAACE4867G1ZH
2) GLOVES OUTER WARM GLOVES FOR MINUS 50 DEGREE CELSIUS SIZE SMALL[21]()
Specification : AS PER ATTACHED SPECIFICATION
R
Estab
3) GLOVES INNER WARM GLOVES FOR MINUS 25 DEGREE CELSIUS SIZE SMALL[21]()
Specification : AS PER SPECIFICATION ATTACHED
E
Estab
4) Stitching Services for Operation of Quilting of Bag Sleeping Assembly of Inner Cut of Cord Cotton of Passing Through Tunnel of Face alongwith Finishing and Final Inspection[21]()
6) Tape Nylon Thin Thick OG OFF Sizes For Synthetic Web Equipt Improved version pouches Ammn[21]()
Specification : Specn No. Prov. Specn No. DMSRDE/T&GS/92/403 & JSS:8315-6 For Tape Nylon 19MM OG
Note: Firm will supply the material in set haviong same colour. One bale will consists of not more than 30 KG
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
7) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]()
Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF
C
Nonestab
8) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
9) MUZZLE CAP MOULDING FOR JVPC[70]()
Specification : MUZZLE CAP MOULDING FOR JVPC
C
Nonestab
10) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Estab
3) CATCH COCKING HANDLE FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
R
Estab
4) GRIP PISTOL TO DS CAT NO 1005 560706[70]()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011.
C
Estab
5) MAGAZINE ASSY. FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
R
Estab
6) RIFLE BUTT FOR SMALL ARMS[70]()
Specification : AS PER DRAWING
R
Estab
7) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]()
Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF
C
Estab
8) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
Specification : Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838
Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007.
17) CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Estab
18) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Estab
19) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]()
Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle
C
Estab
20) GAS CYLINDER COVER MOULDING FOR JVPC[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB
C
Estab
21) GRIP ASSY OF REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.
C
Estab
22) GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5 56 IN FINISHED CONDITION[70]()
Specification : GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION.
C
Estab
23) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
24) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE[70]()
Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9
C
Estab
25) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775[70]()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD
C
Estab
26) GUARD HAND ASSY UPPER STEEL STRIP[70]()
Specification : GUARD HAND ASSY. UPPER (STEEL STRIP) AS PER DRG NO./DS CAT NO. 1005-560046 DC (I) NO.26533-SA DT.31.07.10 IN FINISHED CONDITION. NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695, TO SPECN. IS 5:2007.
C
Estab
27) GUARD HAND ASSY. (BLACK)[70]()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO.26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND
C
Estab
28) Guard Hand Assy. Upper (Steel Strip)[70]()
Specification : Guard Hand Assy. Upper (Steel Strip) as per DS CAT No. 1005-560046 Note-The item will be in dark blue gray colour, Colour Code-695, to Specn. IS 5:2007
C
Estab
29) GUARD HAND RIGHT & LEFT (BLACK)[70]()
Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.-1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET),
C
Estab
30) GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)[70]()
Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)
C
Estab
31) Guard Hand Upper Assy[70]()
Specification : Guard Hand Upper Assy to be DS CAT No 1005-560701 DC(1) No 26580-SA dated 08.03.11 for LMG 5.56 MM in finished condition
C
Estab
32) GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA , DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDITION.
Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CONTAINER PLASTIC P-17D (23MM PPL)[99]()
Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301-905060-P[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
E
Nonestab
2) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT 551 LF 9911357815[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
3) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)[20]()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
C
Nonestab
4) SET OF 6 COMP OF ARMING DEVICE 551 lf 9911358074[99]()
Specification : SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.2-2-2217 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARRIER 12A ISV 470A ASY B FOR TPT LF 6573800100[65]()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
E
Nonestab
2) CONTAINER PLASTIC NO P 17 FOR PUFF LF 9911353558[99]()
Specification : CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'.
E
Nonestab
3) CONTAINER POLY NOP 17A FOR ERU AJI LF 9911353656[99]()
Specification : CONTAINER POLYTHENE NO.P-17-A SHEET 3 (METHOD OF PKG)DRG. NOTRD-1293.A.CONTAINER P-17A EMPTY ASSY.OF DRG.NO.TRD - 1281 (a) 1.BODY TO DRG.NO.TRD - 1282 (b) 2.LID TO DRG.NO.TRD - 1283 (b) 3.RING TO DRG.NO.TRD - 1284 (a)B.SLEEVE TO DRG.NO.TR
E
Nonestab
4) CONTAINER P 17C DRG NO ARDE 1892 LF 9911358229[99]()
Specification : CONTAINER P-17C TO DRAWING NO.-ARDE 1892 R.NO.1 DT.20-11-95.(1)CONTAINER P-17C(EMPTY ASSY)-ARDE/1910/1 R.NO.2 DT.30-7-97(2)SLEEVE - ARDE/1892/1 (3).DISC - ARDE/1892/2(4)WASHER - ARDE/1892/3(5)PIECE PACKING TOP - ARDE/1892/4 (6).LABLE - AR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CONTAINER PLASTIC NO.P-17 FOR PPLT[99]()
Specification : CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THIC
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
E
Nonestab
3) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.
E
Nonestab
4) PROPELLANT SUPPORT PART NO 1185138 LF 9911358419[99]()
Specification : PROPELLANT SUPPORT PART NO.1185138 TO OEM DRG.NO.3041011484/ TRD.DRG.NO. 2.2.2412
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) UNIT LOAD ULS 106 24 CONTAINER 9710 LF 9911357747[99]()
Specification : UNIT LOAD ULS 106.24 CONTAINERS 9710 ON PALLET TO DRG.NO. KHPK-210058.FOR PACKING OF 76/62 SRGM AMMUNITION.
C
Nonestab
2) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
3) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
4) 3rd SET OF 4 ITEMS FOR MMHG 9911358526[99]()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PLASTIC CONTAINER -125MM FSAPDS[20]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Lifting plug()
as per drg. no. 5191856
C
Not Estab.
Category : P
Grade : I
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) AMMUNITION CONTAINER 75A (ASSLY) [65]()
Specification : DRG. NO. CQA/AMN/3259
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) AMMUNITION CONTAINER PLASTIC 47 B WITH SEALING RING, FOR FUZE 213 MK-5 (M-2) [65]()
Specification : DRG.NO.CIA/AMN/2483, PART NO ISV 515A
C
Estab
2) TRANSIT PLUG FOR 84 MM ILLG.[62]()
Specification : DRG.NO.CIA/AMMN/2220 PT NO.ISX 318 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1)
1) SPOOL COMPLETE (ITEM NO. 18) POLY MOULDING FOR FTW[64]()
Specification : DRG. NO. DD(L) 13461-A/1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD HAND()
128MM ETT 13000163 32P 4002*2
C
Estab.
2) OVER MOULDING OF HOUSING SIGHT()
128MM ETT 13000164 32P 1330*
C
Estab.
3) OIL BOTTLE()
128MM ETT 13000173 32P 5005
C
Estab.
Category : P
Grade : II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG
C
Estab
2) EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL
C
Estab
3) FIXED BUTT ASSY AS PER DRG No. K 3000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Estab
4) GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Estab
5) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Estab
6) GRIP REAR TO DRG NO 33P 3023[70]()
Specification : AS PER DRAWING
C
Estab
7) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Estab
8) MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL
E
Estab
9) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Estab
10) PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL[70]()
Specification : AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL
E
Estab
11) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Estab
12) STOCK BUTT ASSY[70]()
Specification : AS PER DRAWING
C
Estab
13) STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle
C
Estab
14) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]()
Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
3) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
4) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE[63]()
Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND
SPECIFICATION NO.S-I/CM/IMMK II/ATP/01.
C
Nonestab
2) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]()
Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(PROV). FOR RI[79]()
Specification : GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(P
1) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) Magazine Assembly with Steel Insert 30RD[79]()
Specification : Magazine Assembly with Steel Insert for 5.56x45MM 30RD To Drg. No. RFI SK. 10019 for 5.56MM Assault Rifle
2) STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) PLASTIC PALLET FOR 303 ANTI RIOT GUN[10]()
Specification : PLASTIC PALLET FOR 0.303 ANTI RIOT GUN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]()
Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) O RING 78 X 2 PART NO 6409795 LF 2013999909[20]()
Specification : O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960
R
Nonestab
2) O RING 37 X 2 4 PART NO 6414441 LF 2013999924[20]()
Specification : O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978
R
Nonestab
3) O RING 26 X 1 2 PART NO 6439353 LF 2013999908[20]()
Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959
R
Nonestab
4) O RING 67X2 5 PART NO 6413251 LF 2013999907[20]()
Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958
R
Nonestab
5) O RING 28 X 2 6 PART NO 6413250 LF 2013999906[20]()
Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957
R
Nonestab
6) O RING 25 1X1 6 PART NO 6416337 LF 2013999903[20]()
Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954
R
Nonestab
7) O RING 30X2 PART NO 6413212 LF 2013999901[20]()
Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953
R
Nonestab
8) O RING 71 X 1 65 PART NO 6413243 LF 2013999913[20]()
Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962
R
Nonestab
9) O RING 71 X 1 8 PART NO 6413211 LF 2013999912[20]()
Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961
R
Nonestab
10) O RING 71 X 1 6 PART NO 6413232 LF 2013999911[20]()
Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956
R
Nonestab
11) O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922[20]()
Specification : O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977
R
Nonestab
12) O RING 76 X 2 PART NO 450001307 LF 2013999919[20]()
Specification : O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974
R
Nonestab
13) O RING 67 X 2 PART NO 6414120 LF 2013999921[20]()
Specification : O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973
R
Nonestab
14) O RING 29 2 X 2 PART NO 6413414 LF 2013999920[20]()
Specification : O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972
R
Nonestab
15) O RING 61 X 1 6 PART NO 6413412 LF 2013999914[20]()
Specification : O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966
R
Nonestab
16) PRIMER GASKET PART NO 6409794 LF 2013999910[20]()
Specification : PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370
R
Nonestab
17) O RING LF 9911357869[99]()
Specification : "O" RING 71*1.65TO DRG.NO.TRD122263
C
Nonestab
18) O Ring 74 5x3 TO DRG NO TRD 845a LF 6170444650[61]()
Specification : O Ring 74.5x3 TO DRG NO TRD 845a
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PISTOL GRIP FOR JVPC
Description : PISTOL GRIP FOR JVPC()
Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 7th set of 3 items for MMHG 9911358531[99]()
Specification : 7th set of 3 items for MMHG consists of Following items-
1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0
2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1
3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING LF 9911357860
Description : O RING LF 9911357860()
Specification : DRG.NO. TRD-1-2-2261
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) DIAPHRAGM TO DRG.NO.TRD-2-2-2244[99]()
Specification : DIAPHRAGM TO DRG.NO.TRD-2-2-2244.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6495000070 LEATHER WASHER LUB FOR 105MM IFG HE[64]()
Specification : LEATHER WASHER LUBRICATED, DIA 59.69 MM, DESIGNER REF.CIA(A)-177.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15[65]()
Specification : SLEEVE, PART NO. 2-17 DRG.NO.3-024045, 3B15, DC 36767-A, MATL: TYPE NYLON-66 TO SPECN. DEF STAN 93-8/1 (LATEST ISSUE) WITH ELECTRICAL PROPERTIES & IMPACT STRENGTH AS PER GOST.10589-73
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900110 INSERT DETAIL NO.67 FOR 125 MM HEAT[64]()
Specification : MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A".
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900330 BASE TO DRG.4-025998 081 125MM HEAT[64]()
Specification : SPECN. NO. JSS 9330-05
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2103218071 PIECE PACKNG END 10MM TH RUDRA[21]()
Specification : PIECE PACKING ENDSIZE: 172MM X 130MM X 10MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3
C
Estab
2) 2103218070 PIECE PACKNG SIDE 6MM TH RUDRA[21]()
Specification : PIECE PACKING SIDESIZE:-274MM X 172MM X 6MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3
C
Estab
3) 2103218069 PIECE PACKNG TOP AND BTM 20MM TH RUDRA[21]()
Specification : PIECE PACKING TOP & BOTTOMSIZE:-254MM X 130MM X 20MM THICKMTL:EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2103789155 POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I SIZE 200 MM X 0 076 MM THICK TO SPECN NO JSS 9330 03 2014 REV 03[21]()
Specification : POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I,SIZE 200 MMX 0.076 MM THICK TO SPECN. NO. JSS 9330-03:2014 (REV.03)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
E
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL
E
Estab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY ( L.F. No.7011655072)[70]()
Specification : As per Drawing
E
Nonestab
2) BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028[70]()
Specification : AS PER D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028
E
Nonestab
3) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
4) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
5) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
6) GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,[70]()
Specification : AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,
E
Nonestab
7) GRIP PISTOL FRONT 30P 1301[70]()
Specification : AS PER DRG OF GRIP PISTOL FRONT 30P 1301
C
Nonestab
8) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Nonestab
9) GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
10) GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
11) GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL[70]()
Specification : AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL
E
Nonestab
12) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL
C
Nonestab
13) LOWER HAND GUARD ASSY AS PER DRG.No.K-2040 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.No.K-2040 WITH
FIRM'S MATERIAL
E
Nonestab
14) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUFFER DS CAT NO 1005 007278 TO DRAWING NO A 4109[70]()
Specification : AS PER THE DRAWING OF BUFFER DS CAT. NO. 1005-007278 TO DRG. NO. A 4109
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
3) FIXED BUTT ASSY AS PER DRG No K3000 STAR WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL
C
Nonestab
4) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
5) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
6) PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR[70]()
Specification : PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
7) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
8) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
9) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
10) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
11) Grip Pistol Assembly as per drawing No 27P 6500[70]()
Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1
C
Nonestab
12) Manufature and supply of BUTT NORMAL ASSEMBLY POLYMER AS PER DRG NO 27P 660 02 FOR RIFLE 7 62MM 1A1[82]()
Specification : Manufature and supply of BUTT NORMAL ASSEMBLY (POLYMER) AS PER DRG. NO. 27P 660-02.FOR RIFLE 7.62MM 1A1
E
Nonestab
13) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
14) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MOULDED PLASTIC TRAY TO OFAJ DRG NO FS 2995B FOR LINER 84MM HEDP 502[00]()
Specification : AS PER QMI & DRAWING NO FS 2995B
C
Estab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PLASTIC CONTAINER FOR AMK 339[14]()
Specification : As per enclosed MI
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TWIN CONTAINER 520 82 PART 1202503 LF 9911358476
Description : TWIN CONTAINER 520 82 PART 1202503 LF 9911358476()
Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
5) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]()
Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA
C
Estab
6) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]()
Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897
Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Butt in black colour for LMG through injection moulding
Description : Butt in black colour for LMG through injection moulding()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) CONTAINER WITH DISC CELL 81 MM()
Specification : CQA (A) 2303
R
Estab
2) CONTAINER WITH DISC CIA/2303/DC(I)()
Specification : CQA(A) 2303
R
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP PISTOL
Description : GRIP PISTOL()
Specification : AS PER DRAWING
C
Estab
2) 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775
Description : 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775()
Specification : AS PER DRG.
C
Estab
3) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
Description : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
7) TRIGGER GUARD MOULDING for JVPC
Description : TRIGGER GUARD MOULDING for JVPC()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP PISTOL
Description : GRIP PISTOL()
Specification : AS PER DRAWING
C
Estab
2) 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775
Description : 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775()
Specification : AS PER DRG.
C
Estab
3) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
Description : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
7) TRIGGER GUARD MOULDING for JVPC
Description : TRIGGER GUARD MOULDING for JVPC()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Estab
Category : p
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) CENTERING BAND FOR 120 MM FSAPDS MK II[99]()
Specification : RAW MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF STANDARD 93-8 / MARANYL NYLON A 100
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DRIVING BAND FOR 120 MM FSAPDS MK II[01]()
Specification : THE MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF DEF STANDARD 93-8/MARANYLNYLON A 100
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TOP WASHER TO OFAJ DRG NO FS 513F[00]()
Specification : DRG. NO. FS-513F.
C
Nonestab
2) WASHER NOZZLE TO OFAJ DRG NO FS 518B[00]()
Specification : WASHER NOZZLE TO OFAJ DRG NO FS 518B
C
Nonestab
3) SKIRT RING TO OFAJ DRG NO FS 517 A[00]()
Specification : SKIRT RING TO OFAJ DRG. NO.FS-517 A
C
Nonestab
4) NOZZEL TO ARDE DRG NO 1135 DET 10[00]()
Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14
C
Nonestab
5) SEALING WASHER TO OFAJ DRG NO FS 514 G[00]()
Specification : SEALING WASHER TO OFAJ DRG.NO.FS-514 G
C
Nonestab
6) ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TOSPECBS 1474 HE 15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2 POINT 5 METRES SIZE 23 POINT 50 MINUS 0 POINT 052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0 POINT 3 MM PER MTR[00]()
Specification : ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR
R
Nonestab
7) ALUMINIUM STRIP TO SPECN BS 1470 GR S 1B IN O CONDITION IN COIL FORM SIZE 0 POINT 3 PLUS 0 POINT 03 OR MINUS 0 POINT 05 MM THICK X 40 PLUS OR MINUS 0 POINT 2 MM WIDE[00]()
Specification : ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.
R
Nonestab
8) WASHER PLUG TRANSIT TO OFAJ DRG NO FS 524 D[00]()
Specification : WASHER PLUG TRANSIT TO OFAJ DRG. NO. FS-524 D
C
Nonestab
9) LOCKING SLEEVE TO OFAJ DRG NO FS 525[00]()
Specification : LOCKING SLEEVE TO OFAJ DRG.NO. FS-525
R
Nonestab
10) PLASTIC CONTAINER TO DRG NO FS 547 IN FUZE 24A[00]()
Specification : PLASTIC CONTAINER TO DRG.NO. FS-547 IN FUZE-24A
C
Nonestab
11) PROTECTIVE PLUG FOR SHELL BODY TO DRG NO SK 7747 B 30MM GHASHA[00]()
Specification : PROTECTIVE PLUG FOR SHELL BODY TO DRG.NO.SK-7747/B(30MM GHASHA)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COPPER BAND PROTECTOR AS PER DRG NO SM 285 BMATERIAL POLYTHENE HIGH DENSITY TYPE 2[00]()
Specification : COPPER BAND PROTECTOR AS PER DRG. NO. SM-285 B. MATERIAL POLYTHENE HIGH DENSITY TYPE - 2
C
Nonestab
2) PLUG 52 MM FOR SHELL 130 MM HE[00]()
Specification : AS PER DRG
C
Nonestab
3) NYLON RING TO CQA[00]()
Specification : AS PER DRG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MOUTH PROTECTOR TO DRG NO CC 509 A FOR 125 MM SCCC METALIC BASE[00]()
Specification : MOUTH PROTECTOR TO DRG. NO. CC-509 A (FOR 125 MM SCCC METALIC BASE)
C
Nonestab
2) TRANSIT PLUG FOR CC AK 100 AS PER DRG NO CC100 SK 2105 A[00]()
Specification : TRANSIT PLUG FOR CC AK-100 AS PER DRG.NO.CC100/SK/2105/A
C
Nonestab
3) PLUG END CLOSING ASSY FOR STATIC FIRING AS PER ARDE DRG NO 8603 02 01 01 03 000 22PA[00]()
Specification : PLUG END CLOSING ASSY (FOR STATIC FIRING) AS PER ARDE DRG.NO 8603 02 01 01 03 000 22PA [MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATION NO. ARDE/SPECN/PINAKA/RKT-13 ISSUE: 02, REV NO:0 DATED 04/09/2015]
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) TOP WASHER TO DRG NO ARDE 1135 DETAIL NO 13 AL NO 20 2018 DTD 09 10 2018[00]()
Specification : TOP WASHER TO DRG. NO. ARDE 1135 DETAIL NO.13 AL NO. 20/2018 DTD. 09/10/2018
FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION
E
Non Established
6) Fabrication of Trouser Wind Cheater()
DMSRDE/T&GS/2000/447& Approved Samples
E
Non Established
7) Fabrication of Coat Combat Disruptive, Detachable with Indian Army Logo()
S/2594/CCD Army Logo/TC-15 (a)
E
Non Established
8) Fabrication of Jacket Wind cheater()
As Per Requirements & Specifications
E
Non Established
9) Fabrication of Jacket Combat PC Dis. with Indian Army Logo()
11) Fab. Of Cap F.S.Disruptive with Indian Army Logo()
Prov. SPECIFICATION NO. S/2590/CAP FS Army Logo/TC-15(a) and approved sample
E
Non Established
12) Trade Fabrication of Jersey Woollen Dark OG/BG Stitching()
Trade Fabrication of Jersey Woollen Dark OG/BG Stitching (i) Jersey Cut Components will be provided by OCFS along with Reinforcement Pieces and other Garniture.(ii) Jersey will be Stitched as per provided pattern /scale OCFS. (iii) Other parameters and T&
E
Non Established
13) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012()
IND/TC/4552 (1) & Approved Sample
E
Non Established
14) Fabrication of Suit Terry Wool BG()
AIR HQ/DQAS/AC-042
E
Non Established
15) Fabrication of Trouser Terry Wool BG ()
AIRHQ/DQAS/AC-054, and approved sample
E
Non Established
16) Fabrication of Comp. Rib Knit Jersey Dark OG()
No. S/5257/2009/TC-12 & Annexure – A (Fabrication Component of Jersey Dark OG)
E
Non Established
Category : DP
Grade : III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
2) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
2) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]()
Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK.
AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Shirt Plain weave PV Dope Dyed OG[21]()
Specification : IND/TC/4698(b)
R
Nonestab
2) Fabrication of Trouser Plain weave PV Dope Dyed OG[21]()
Specification : IND/TC/4630(m)
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Cap Balaclava OG (Imp.)[21]()
Specification : S/5094/TC-1(b)/CAP BAL OG(IMP)
R
Nonestab
2) FABRICATION OF JCD AND TCD IAL 220 GSM IN SET[17]()
Specification : OCFAv/GARMENT/001(c)AND OCFAv/GARMENT/002(c) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 220 GSM INSET
E
Nonestab
3) FABRICATION OF JCD AND TCD IAL 250 GSM IN SET[17]()
Specification : OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF SUIT WINTER[21]()
Specification : AS PER RELEVANT CLAUSE OF SPECIFICATION IAFS: 01042:2017 -OCF, SHAHAJAHANPUR
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Cap Balaclava OG (Imp.)[21]()
Specification : S/5094/TC-1(b)/CAP BAL OG(IMP)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Provisional Specification No. S/2764/OC Army Logo/TC-15
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Provisional Specification No. S/2764/OC Army Logo/TC-15
E
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Bag Kit Universal (Mark-II)[21]()
1) O RING 61X2 DRG.NO. F1301-055320C (2058130003)[20]()
Specification : "O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPAT
C
Nonestab
2) O RING LF 6170444630[61]()
Specification : 'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.
1) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
C
Nonestab
2) 7th set of 3 items for MMHG 9911358531[99]()
Specification : 7th set of 3 items for MMHG consists of Following items-
1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0
2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1
3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PRESSURE PAD TYPE A & B ASSEMBLY PART[61]()
Specification : As per T.E. SPECIFICATION OF PRESSURE PAD TYPE "A" & "B" ASSEMBLY PART
1) ALUMINIUM POWDER HEAVY GR.1 [ITEM CODE-1001017225]()
SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
NOT ESTABLISHED
Category : S
Grade : II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) KAOLIN JSS-9620-02 (1001410103)()
KAOLIN TO SPECN: JSS-9620-02 : 2010 REVISION NO. 2 DC NO. 5000-ME DT. 5-1-2011
Specification : Specn. No. IS:336-1973 ( second Revision ) reaffirmed - 2002 D.C. 3811- ME Dtd 05-05-04
R
Estab
2) ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200
Description : ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200()
Specification : CETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND M
Specification : TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN. IS:537 OF 1967 (FIRST REVISION) REAFFIRMED 1991 WITH AMENDMENT 1 AND 2, DC-3807-ME DATED 05/05/2004
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
1) X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.
Description : X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100.()
Specification : X-RAY FILM ROLL, WIDTH-17 INCH x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED ID - 77+/-2.0 MM, OD - 90.0 MM MAX., LENGTH - 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL - 150 MM MAX.
P
Estab
2) X RAY FILM SHEET 30 CM X 40 CM
Description : X RAY FILM SHEET 30 CM X 40 CM()
Specification : X RAY FILM SHEET 30 CM X 40 CM INDUSTRIAL INTERLEAVED,100SPEED, HIGH CONTRAST, ASTM CL.2 TECHNICAL REQUIREMENTS - THE FILM WILL BE USED FOR X-RAYING
OF VARIOUS TYPES OF FUZES LIKE FUZE PERCUSSION DA-5A, FUZE PERCUSSION 117 MK-20. FILM
P
Estab
3) X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER
Description : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER()
Specification : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE
P
Estab
Category : s
Grade : 3
Size :
S
275
Guru Nanak Engineers
14, Manohar Park, Rohtak Road New Delhi New Delhi
PIN1 : 110026
Phone No. : 9811144770
GSTIN : 07AARPS3865N1ZO
Specification : AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.
R
Nonestab
2) Soda Ash Light Technical[10]()
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
3) Di Phenyl Amine[10]()
Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2020 REVISION NO 4.
R
Nonestab
4) Di Octyl Adipate[10]()
Specification : Specn-ERDL/TRIM/Prov/RM/5
R
Nonestab
5) STRONG NITRIC ACID[10]()
Specification : STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2
R
Nonestab
6) POLYVINYL CHLORIDE[10]()
Specification : PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Corrugated Card Board Box[14]()
Specification : DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.
R
Nonestab
2) Mineral Jelly[10]()
Specification : MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.
R
Nonestab
3) DI Octyle Pthalate[10]()
Specification : DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE
Specification : CENTRALITE II AS PER SPECIFICATION No.GOST No.2154-77
R
Nonestab
8) CARBON BLACK[10]()
Specification : CARBON BLACK MASS FRACTION OF LOSS AT 105 DEGREE CENTIGRADE: MAX. 1.5%, MASS FRACTION OF ASH : MAX. 0.48%, BULK DENSITY OF GRANULATED CARBON BLACK : AT LEAST 330 KG/CUBIC METERS AS PER ATTACHED GOST 7885-86
R
Nonestab
9) TEFLON 4D FORAPC 235P[21]()
Specification : TEFLON-4D, APPEARANCE: SMALL FRIABLE POWDER OF WHITE COLOUR. AS PER SPECIFICATION No. GOST No.14906-77.
R
Nonestab
10) TITANIUM DI OXIDE[10]()
Specification : MASS FRACTION AT LEAST 98% RESIDUE AFTER WET SIEVING ON THE SCREEN MAX. 04.%, MASS FRACTION OF VOLATILE SUBSTANCE MAX. 0.3% AS PER RUSSIAN SPECIFICATION TU 301-10-012-89.
R
Nonestab
11) POLYMETHYL SILOXANE FLUID[10]()
Specification : POLYMETHYL SILOXANE FLUID AS PER SPECIFICATION NO. GOST NO.13032-77
R
Nonestab
12) OIL INDUSTRIAL I 8A BRAND[21]()
Specification : OIL INDUSTRIAL I-8A BRAND, ACIDITY INDEX: MILLIGRAMS KOH PER 1 GRAM OF OIL IS MAX 0.02, OPEN-CUP FLASH TEMPERATURE NOT BELOW:+150 DEGC, MASS FRACTION OF ASH MAX:0.005%, CONTENT OF MECHANICAL AS PER
R
Nonestab
13) SULPHATED INSULATING CELLULOSE GRADE E2[10]()
Specification : AS PER GOST 5186-88
R
Nonestab
14) PROPYLENE CARBONATE[10]()
Specification : PROPYLENE CARBONATE(C4H603) ( 4-METHYL – I, 3-DIOXOLAN – 2-ONE) CONTENT ( PURITY)SHOULD BE MORE THAN 99%, SPECIFIC GRAVITY SHOULD BE MIN 1.205, SHOULD BE MISCIBLE WITH WATER CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.
R
Nonestab
15) DiButyl Phthalate[10]()
Specification : DIBUTYL PHTHALATE AS PER ATTACHED SPECIFICATION NO. TU 32 E-2015
Specification : DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.
R
Nonestab
4) Penta Erithritol Di Oleate PEDO[10]()
Specification : PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)
R
Nonestab
5) Wax Special No 6 Grade I[10]()
Specification : White Colour To Specn.No.CS-5301-B
R
Nonestab
6) Potassium Nitrate Gr I[10]()
Specification : POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
R
Nonestab
7) Carbon black Type PRINTEX[10]()
Specification : CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.
R
Nonestab
8) Tri Chloro Ethylene[10]()
Specification : TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )
R
Nonestab
9) Aluminium Stearate[10]()
Specification : ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%..
R
Nonestab
10) CAUSTIC SODA FOR HMX PLANT[10]()
Specification : CAUSTIC SODA:PURITY= 95.0% MIN, . AND COLOUR= WHITE POWDER FREE FROM FOREIGN MATTER MOISTURE CONTENT= 3.0% MAX AS PER JSS: 0112 REV NO 02, METHOD NO 1(B), REFER LY/39/A/NE/C DT 30.01.2020.PURITY AS PER IS 252-2013 Reaffirmed 2018 Rev 4
R
Nonestab
11) CALCIUM CARBONATE CHALK CALCIT[10]()
Specification : CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.
R
Nonestab
12) CARBON BLACK MONARCH 1300[10]()
Specification : CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)
Specification : ETHANOL AR GRADE ( ABSOLUTE ALCOHOL), ETHANOL CONTENT SHOULD BE Mix. 0.79 SHOULD BE MISCIBLE WITH WATER ( REFER IS-321 FOR TEST METHODS) CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.
R
Nonestab
16) OLIGO ETHER ACRYLATE[10]()
Specification : Oligo Ether Acrylate First Grade Conforming to Specification TY 6-01-450-76
R
Nonestab
17) ZINC STEARATE[10]()
Specification : ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).
R
Nonestab
18) PARFFIN WAX SPECIAL HARD GRADE[10]()
Specification : PARAFFIN WAX SPECIAL CONFORMING TO SPECN IS:7401-1987 (FIRST REVISION) HARD GRADE(REAFFIRMED 2016)
Specification : ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND M
1) ASSEMBLY OF KARABINER SCREW TYPE DRG.NO. S-1815-00, COMPRISING OF: (1) BODY, (2) LOCKING SCREW, (3) LEVER, (4) COMPRESSION SPRING, (5) BIT, (6) RIVET. NOTE: ITEM NO.1, 2,3,4,5 WILL BE SUPPLIED BY OFD & ITEM NO.6 WILL BE MANUFACTURED BY TRADE IT SELF FOR ASSEMBLY.()
As per required specification
C
Not Estb.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) ASSEMBLY OF KARABINER SCREW TYPE DRG.NO. S-1815-00, COMPRISING OF: (1) BODY, (2) LOCKING SCREW, (3) LEVER, (4) COMPRESSION SPRING, (5) BIT, (6) RIVET. NOTE: ITEM NO.1, 2,3,4,5 WILL BE SUPPLIED BY OFD & ITEM NO.6 WILL BE MANUFACTURED BY TRADE IT SELF FOR ASSEMBLY.()
As per required specification
C
Not Estb.
Category : DDP,DP
Grade : II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138[62]()
Specification : DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138[62]()
Specification : DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138
1) PRISM AS PER DRG. NO. (MCT-2481/1) FOR TNPO-160.()
As per required specification
C
Not Estb.
2) PRISM TO DRG. NO. (MCT-2545/2) FOR TNPA-65A.()
As per required specification
C
Not Estb.
3) PRISM TO DRG. NO. MCT-2544/2 FOR TNPA-65A.()
As per required specification
C
Not Estb.
4) PRISM AS PER DRG. MCT-3258 WITHOUT SILVERING FOR TNP-165A.()
As per required specification
C
Not Estb.
5) PRISM TO DRG. NO. MCT-2551/3. ()
As per required specification
C
Not Estb.
6) GLASS K-108, LENGTH=153MM, BREADTH=91MM, THICKNESS=6MM GOST 3514-76E NOTE:- THE TOLERANCE IN THE SIZE OF GLASS SHEET IS +0.5MM.()
As per required specification
C
Not Estb.
7) GLASS K-108, GOST 3514-76E LENGTH= 118.5MM, BREADTH=65MM, THICKNESS=7.5MM NOTE:- THE TOLERANCE IN THE SIZE OF GLASS SHEET IS +0.5MM.()
As per required specification
C
Not Estb.
Category : P
Grade : II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) PRISM Drg No MCT 2250 3[26]()
Specification : PRISM TO DRG.NO.:MCT-2550/3 FOR TNPO-168B
C
Nonestab
2) PRISM Drg No MCT 2551 3[26]()
Specification : PRISM TO DRG.NO.:MCT-2551/3
C
Nonestab
3) set of lenses for pns 5.56 rifle[26]()
Specification : set of lenses for pns 5.56 rifle
Consisting of CWC-229/7,CWC-229/5,CWC-229/17,CWC-229-15,CWC-229/36,CWC-229/38
C
Nonestab
4) FINISHED SUN FILTER LMG[26]()
Specification : FINISHED SUN FILTER GLASS NS-2 AS PER DRAWING NO. MCT-2238 FOR LMG
C
Nonestab
5) OPTICAL GLASS MOULD ODD C 924 1[26]()
Specification : OPTICAL GLASS MOULD DRG. NO.ODD/C/924/1 FOR TNPO-160
C
Nonestab
6) PRISM AS PER DRG NO MCT 3258 1[26]()
Specification : PRISM AS PER DRG. NO. MCT-3258/1 WITHOUT SILVERING FOR TNP-165A
C
Nonestab
7) GLASS SHEET ASSLY[26]()
Specification : GLASS SHEET ASSLY. AS PER DRG. NO. MCT-1651 FOR TNPO-168B
C
Nonestab
8) HEATING SHEET[26]()
Specification : HEATING SHEET AS PER DRG.NO. MCT-1650 FOR TNPO-168B.
C
Nonestab
9) PLATE[26]()
Specification : PLATE AS PER DRG.NO. MCT-1620/2 FOR TNPO-168B.
C
Nonestab
10) PLATE HEATING ASSY[26]()
Specification : PLATE HEATING ASSY. TO DRG.NO. MCT-1618A/1 FOR TNPO-160.
C
Nonestab
11) POLISHED GLASS PLATE[26]()
Specification : POLISHED GLASS PLATE,.ITEM NO.2 OF DRG.NO. MCT-1618/1 & 1618A/1 FOR TNPO-160.
C
Nonestab
12) PLATE 1619[21]()
Specification : PLATE AS PER DRG.NO.AU8.640.065, MCT-1619/1 FOR TNPO-168B.
C
Nonestab
13) PLATE 1621[21]()
Specification : PLATE AS PER DRG.NO.AU8.640.107, MCT-1621/2 FOR TNPO-168B.
C
Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) A SET OF FINISHED OPTICS AS PE[26]()
Specification : SET OF FINISHED OPTICS COMPRISING OF THE FOLLOW.LENSES WITH DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/
C
Nonestab
2) ACHROMATE CEMENTED[26]()
Specification : ACHROMATE, CEMENTED DRG.NO.CQA(I)789/SA-2 (MCT-2973) FOR HR BINO.
C
Nonestab
3) FILTER GL C RED R G610[26]()
Specification : GLASS SCHOTT RED FILTER RG-610 3 TO 4MM THICK SIZE-50MM X 50MM
C
Nonestab
4) GL CH FILTER OR2[26]()
Specification : RED FILTER GLASS CHANCE TYPE OR-2 OR OG-590 SCHOTT 4 TO 5 MM THICK. SIZE-3"X3".
C
Nonestab
5) GLASS BSC 510644 ODD C 925 MLD[26]()
Specification : IS-1400 STRIAE GRD.A INCLUSION GRD.SMALL B FINE ANNEALED SOTHAT STRESS BIREFRIGE- NCE IS NOT MORE THAN 12NM/CM.MAKE-SCHOTT PILKINTON,OHARA,SUMITA.SUPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH GLASS SUPPLY.
C
Nonestab
6) GLASS BAF51 652449[26]()
Specification : OPTICAL GLASS BAF51-652449 AS PER SPECN. IS-1400/1960 STRIAE GRADE-A INCLUSION GRADE-B(SMALL) WELL ANNEALED SOTHAT THE STRESS BIREFRIGENCE IS NOT MORE THAN 12 NM/CM.MULTIPLE SIZE OF 48MMX48MMX16.5 MM OR 350MMX200MMX20MM
C
Nonestab
7) GLASS BK7BSC 517642 400X200X55[26]()
Specification : SPECN IS-1400/1960,STRIAE GRADE A SOTHAT STRESS BIREFRIGENCE IS NOT MORE THAN 12 NM/CM.MELT DATA SHEET IS TO BE PROVIDED BY SUPPLIER ALONG WITH SUPPLY.
C
Nonestab
8) GLASS BSC 510644[26]()
Specification : GLASS MOULD AS PER DRG. NO.ODD/C/934 BSC-510644 SPECIFICATION NO.IS-1400/1960
C
Nonestab
9) GLASS BSC 510644 R S 360X180X40[26]()
Specification : IS 1400 STRIAE GRADE A INCLUSION GRADESMALL-B,FINE ANNEALED SOTHAT STRESS BIREFRINGENCE IS NOT MORE THAN 12NM/CM. SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH GLASS SUPPLY.
C
Nonestab
10) GLASS BSC 517642 ODD C 830 2MD[26]()
Specification : OPT.GLASS MOULD ASPER DRG.ODD/C/830/2 IS-1400/1960 GLASS TYPE BSC-517642(BK-7)
Specification : OPT.GLASS DBC 613568 SIZE-350X200X35MM +-1 STRIAE GRADE-A INCLUSION GRADE SMALL-B,FINE ANNEALED SO THAT STRESS BIREFRIGENCE IS NOT MORE THAN 12NM/CM
C
Nonestab
13) GLASS DBC610573SK 1 150X150X20[26]()
Specification : OPTICAL GLASS DBC-610573 IN RANDOM SLABS SK-1) SIZE-150X150 X 20 MM IN MULTIPLE LENGTH .STRIAE GRD.A INCLUSION GRD.SMALL B FINE ANNEALED SO THAT BIREFRIGENCE IS NOT MORE THAN 10 NM/CM
C
Nonestab
14) GLASS DEDF SFI717295S350X16040[26]()
Specification : OPTICAL GLASS DEDF-717295(SF-I)IN RANDOM SLAB STRIAE GRADE-A INCLUSION GRADE SMALL B WELL ANNEALED SO THAT THE STRESS BIREFRIGENCE IS NOT MORE THAN 12NM/CM SIZE 350X160X40MM SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH GLASS SUPPLY.
C
Nonestab
15) GLASS DF 622360[26]()
Specification : OPTICAL GLASS DF 622360 RANDOM SLAB
C
Nonestab
16) GLASS DF620364 R S 360X120X42 45[26]()
Specification : OPTICAL GLASS DF-620364 IN RANDOM SLABS. SIZE-360X160X42-45MM
C
Nonestab
17) GLASS EDF 651336[26]()
Specification : OPT.GLASS EDF-651336 SIZE-350X240X25-1MM IS-1400 STRIAE GRD.A INCLUSION GRD.SMALL B FINE ANNEALED SOTHAT STRESS BIREFRIGE- NCE IS NOT MORE THAN 12NM/CM.
Specification : OPTICAL GLASS EDF 648338 IN MULTIPLE SIZE 350MMX180X55 STRIAE GRD.A INCLUSION GRD.SMALL-B FINE ANNEALED SOTHAT STRESS BIREFRIGENCE, NOT MORE THAN 12 NM/CM, IS:1400 SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH SUPPLY.
C
Nonestab
20) GLASS HC 519604 R S 350X150X40[26]()
Specification : OPT.GLASS HC-519604 SLABS OF SIZE 350X150X40 +-4 MM IS 1400/1960,STRIAE GRADE-A,INCLUSION GRADE-SMALL B WELL ANNEALED SO THAT THE STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
21) GLASS HC 517606[26]()
Specification : OPTICAL GLASS R/S HC-517606 AS PER SPECN IS-1400/1960 STRIA GRADE-A INCLUSION GRADE-B WELL ANNEALED SO THAT THE STRESS BIREFRIGENCES IS NOT MORE THAN 12 NM/CM SIZE-210X165X25 MM
C
Nonestab
22) GLASS LBC 541595 R S[26]()
Specification : OPT.GLASS LBC-541595 IN RANDOM SLABS STRIAE GRADE-A,INCLUSION GRADE SMALL B WELL ANNEALED SOTHAT THE STRESS BIREFRINGENCE IS NOT MORE THAN 12NM/CM SIZE-300X160X40MM OR 300X160X25 +1-0
C
Nonestab
23) GLASS LF7 575415 53X53X34 MM[26]()
Specification : OPTICAL GLASS LF-7 (575415) AS PER SPECN IS-1400/1960 STRIAE GRADE-A INCLUSION GRADE-B(SMALL) WELL ANNEALED SO THAT STRESS BIREFRIGENCE IS NOT MORE THAN 12 NM/CM IN MULTIPLE SLABS SIZE OF 53MMX53MMX34MM. OR--------170MMX170MMX35----
C
Nonestab
24) GLASS LK 105 BLANK[26]()
Specification : GLASS LK-105, GOST 3514-76, LENGTH- 126MM, BREATH-61MM, THICKNESS-6M NOTE:- THE TOLERANCE IN THE SIZE OF GLASS SHEET IS +0.5MM
C
Nonestab
25) GLASS LK 105 GOST 3514 76 E[26]()
Specification : GLASS LK-105 RANDOM SLAB SIZE:400 MM X 400 MM X 8 MM SPECIFICATION - GOST 3514-76 E
C
Nonestab
26) GLASS LK 105 GOST 3514 76[26]()
Specification : GLASS LK-105, GOST 3514-76 LENGTH-118.5MM,BREATH-65MM, THICKNESS-6M NOTE:- THE TOLERANCE IN THE SIZE OF GLASS SHEET IS +0.5MM
C
Nonestab
27) GLASS MBC 572577 R S 350X120X40[26]()
Specification : OPT.GLASS MBC-572577 AS PER IS;1400-1960 STRIAE GRADE-A.INCLUSION GRADE-B WELL ANNEALED SOTHAT THE STRESS BIREFRINGENCE IS NOT MORE THAN 12 NM PER CM IN RANDOM SLABE SIZE-350MM X 120MM X 40MM SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG W
C
Nonestab
28) GLASS MOULD BSC517642[26]()
Specification : OPTICAL GLASS MOULD TO DRG. NO.ODD/C/920/1 FOR TNPA-65A
C
Nonestab
29) GLASS MOULD DRG. NO. ODD/C/914/2. OPTICAL GLASS MOULD FOR PRISM DRG. NO. 7.200.056 FOR TNPO-168B[26]()
Specification : As per required Specification
C
Nonestab
30) GLASS ODD C 924 1 BSC 517642[26]()
Specification : OPTICAL GLASS MOULD DRG. NO. ODD/C/924/1 FOR TNPO-160
Specification : IS-1400/1960 STRIAGE GRADE'A' ND VALUE 1.78472 VD VALUE 25.68.
C
Nonestab
33) GLASS SF8 689312 49X49X14MM[26]()
Specification : OPTICAL GLASS SF-8 (689312) AS PER SPECN IS-1400/1960 STRIAE GRADE-A INCLUSION GRADE-B(SMALL) WELL ANNEALED SO THAT STRESS BIREFRIGENCE IS NOT MORE THAN 12 NM/CM IN MULTIPLE SIZE OF 49MMX49MMX14MM OR 250MMX150MMX30MM
C
Nonestab
34) GLASS SHEET[26]()
Specification : PARALLEL POLISHED GLASS SHEET 0.1092" TO 0.1562" THICK, SIZE 12" X 12" BCQ COLOURLESS GLASS
Specification : GLASS SHEET B-270 SCHOTT,SIZE- 254MMX400MMX2.0 THICK FOR H.R.BINO.
C
Nonestab
37) GLASS SK 16 620603 350X200X35[26]()
Specification : OPT.GLASS SK-16(620603)SIZE 350X200X35-10+1 STRIAE GRADE-A INCLUSION GRD.SMALL-B FINE ANNEALED SO THAT BIREFRIGENCE IS NOT MORE THAN 10 NM/CM SUPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH GLASS SUPPLY
R
Nonestab
38) GLASS SK 5 DBC 589613 R S[26]()
Specification : OPTICAL GLASS SK-5 DBC-589613 IN RANDOM SLAB SIZE 300MMX150MMX45MM
C
Nonestab
39) GLASS SLAB BK-7 BSC- 517642[26]()
Specification : GLASS SLAB BK-7 BSC- 517642 SLAB SIZE : 300-400x120-180x30-75mm AS PER SPECN IS- 1400/1960
Specification : OPTICAL GLASS SLAB HC-517606 SIZE:300-400 X 120-180 X 30-75 MM SPECN IS:1400/1960 STRIAE GRADE-A INCLUSION GRADE-B(SMALL) WELL ANNEALED SO THAT THE STRESS BIREFRINGENCES IS NOT MORE THAN 10 NM/CM.
C
Nonestab
42) GLASS TAC6 755523 350X160X40[26]()
Specification : AS PER SPECN IS-1400/1960. STRIAGE GRADE'A' ND VALUE 1.755, VD VALUE 52.32.
C
Nonestab
43) GLASS TYPE BK 110 GOST 3514 76[26]()
Specification : GLASS TYPE BK-110 GOST-3514-76
C
Nonestab
44) GRATICULE BLANK[26]()
Specification : GRATICULE BLANK FOR 5,56MM RIFLE, IRDE-2603/16(MCT-1595/3.
C
Nonestab
45) LENS[74]()
Specification : LENS AS PER DRG.NO. AL5.930.056
C
Nonestab
46) LENS DRG NO CQA I 789 31[26]()
Specification : LENS OPTICAL INSTRUMENT TO DRG.NO. CQA(I)789/31(MCT-2981/1)2 SHT FOR HR BINO 8X30 R.
C
Nonestab
47) LENS DRG NO CQA I 789 27[26]()
Specification : LENS OPT.INSTRUMENT TO DRG.NO. CQA(I)789/27 (MCT-2980/1)2 SHT. FOR HR BINO 8X30 R.
C
Nonestab
48) OBJECTIVE CEMENTED[26]()
Specification : OBJECTIVE,CEMENTED,DRG.NO.CQA(I)789/SA-6 (MCT-2977) FOR HR BINO.
C
Nonestab
49) OPT GLASS MOULD ODD C 1003 1[26]()
Specification : OPTICAL GLASS LAKN7- 652585 MOULD AS PER DRG.NO.ODD/C/1003/1.
C
Nonestab
50) OPT GLASS SLAB F6 DF 636353[26]()
Specification : OPTICAL GLASS F-6 DF-636353 SLAB SIZE: 300-400 X 120-180 X 30-75 MM
C
Nonestab
51) OPT GLASS BK 7 MLD ODD C 831 1[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWING NO. ODD/C/831/1.
C
Nonestab
52) OPT GLASS BK7[26]()
Specification : OPTICAL GLASS BSC-517642(BK-7)MOULD TO DRAWING NO.ODD/C/934/1.
C
Nonestab
53) OPT GLASS BK7 MLD ODD C 936 1[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWING NO ODD/C/936/1.
C
Nonestab
54) OPT GLASS BK7 MLD ODD C 925 1[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWIGN NO ODD/C/925/1.
C
Nonestab
55) OPT GLASS BK7 MLD ODD C 830 2[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWING NO ODD/C/830/2.
C
Nonestab
56) OPT GLASS BK7 MLD ODD C 966 1[26]()
Specification : OPTICAL GLASS BSC-517642(BK-7)MOULD TO DRAWING NO.ODD/C/966/1,IS:1400/1960.
C
Nonestab
57) OPT GLASS MOULD ODD C 924 2[26]()
Specification : OPTICAL GLASS MOULD AS PER DRG.NO.:ODD/C/924/2
C
Nonestab
58) Opt Glass Slab[26]()
Specification : Optical Glass EDF-651336
C
Nonestab
59) OPT.GLASS SLAB EDF-648338[26]()
Specification : OPT.GLASS SLAB EDF-648338 SLAB SIZE 300-400x120-180x30-75 mm
C
Nonestab
60) OPTICAL GLASS BK 7 517642[26]()
Specification : OPTICAL GLASS BK-7(517642) RANDAM SLAB SIZE 210X185X62MM IN MULTIPLE LENGTH AS PER SPECIFICATION IS-1400/1960 STRIAE GRADE
C
Nonestab
61) OPTICAL GLASS DBC 610573[26]()
Specification : OPTICAL GLASS DBC-610573, IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK THICKNESS=14MM +0.5MM-0MM, IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
62) OPTICAL GLASS DBC 613568[26]()
Specification : OPTICAL GLASS DBC-613568, IN CYLINDRICAL SHAPE DIA=17MM +1MM-0.5MM, BLANK THICKNESS=8MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
63) OPTICAL GLASS DF 617366[26]()
Specification : OPTICAL GLASS DF-617366, IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK THICKNESS=18MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
64) OPTICAL GLASS EDF-699301[26]()
Specification : OPTICAL GLASS EDF-699301 OR SF 15 SLAB SIZE :300-400 X120-18 X30-75 MM STRAIE GRADE A INCULSION GRADE SMALL B FINE ANNEALED SO THAT STRESS BIREFRIGERENCE IS NOT MORE THAN 10 NM PER CM AS PER IS 1400-1960. MELT DATA SHEET TO BE PROVIDED B
C
Nonestab
65) OPTICAL GLASS LASFN3 808408[26]()
Specification : OPTICAL GLASS LASFN-3 (808408) IN RANDOM SLABS AS PER SPECN.IS;1400/1960 STRIAE GRADE-A INCLUSION GRADE-B(SMALL) WELL ANNEALED SO THAT STRESS BIREFRIGE- NCE IS NOT MORE THAN 12 NM/CM IN MULTIPLE SIZE 350MMX210MMX35MM.
C
Nonestab
66) OPTICAL GLASS LF 579411[26]()
Specification : OPTICAL GLASS LF-579411, IN CYLINDRICAL SHAPE DIA=16MM +1MM-0.5MM, BLANK THICKNESS=13MM +0.5MM-0MM, IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
67) OPTICAL GLASS N BAK4 569560[26]()
Specification : SCHOTT SIZE-188MMX282MMX42MM FOR BOTTOM PRISM (MCT-2972)
Specification : SAFETY GLASS SA TO DRG. NO. AU5.803.003 (FOR SE-15 COMPLETE) MCT-1654 COMPRISING OF THE FOLLOWING DRGS :-MCT-1656 INCLUDE (MCT-1657,MCT-1659),MCT-1658 ALONGWITH GASKET 0,5X80X1323,FILIMA-170,5X1000 GHOST 9438-85
C
Nonestab
79) SET OF LENSES[26]()
Specification : SET OF LENSES FOR 5.56MM LMG CONSISTING LENS NO.1&II,DRG.MCT-1716,1/SETS.LENS III&IV,MCT-1717,1/SET.LENS V,IRDE- MCT-1718,1/SET.LENS VI&VII,MCT-1719, 1/SET.LENS VIII&IX,MCT-1720,1/SET. LENS XI&XII,MCT-1721,1/SET.LENS XIII &XIV,MCT-1725,1/
C
Nonestab
80) SET OF LENSES FOR BINO 8X30R[26]()
Specification : SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET.
C
Nonestab
81) TOUGHENED PLATE FOR SE 15[26]()
Specification : TOUGHENED PLATE FOR SE-15 DRG.NO.:AU8.640.022
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Opto Electronic Factory
Name
Specification
Use
Status
1) PROTECTIVE GLASS (LF-2690000034)[26]()
Specification : AS PER DRAWING NO. AF8640077
C
Estab
2) PROTECTIVE GLASS (LF-2690000035)[26]()
Specification : AS PER DRAWING NO. AF8640078
C
Estab
3) PROTECTIVE GLASS (LF-2690000039)[26]()
Specification : AS PER DRAWING NO. BSH8640132
C
Estab
4) P. GLASS (FINISHED) (LF-9927097819)[99]()
Specification : AS PER DRAWING NO. BL 8640375
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) LENS ASSY (LF-2612817455)[26]()
Specification : AS PER DRAWING NO. OLF/R&D/TVNE-4B & 1PA/182
C
Estab
2) LENS ASSY(LF-2612817456)[26]()
Specification : AS PER DRAWING NO.OLF/R&D/TVNE-4B &1PA/183
