List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
461 G N Spring Industries
93, Sector-H, Industrial Area Govindpura Bhopal Madhya Pradesh
PIN1 : 462023
Phone No. : 4283452
GSTIN : 23ADWPT8984F1ZL 		ADWPT8984F

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) COMPRESSION SPRING TO OFAJ DRG NO FS 3092[00]() Specification : COMPRESSION SPRING TO OFAJ DRG. NO. FS - 3092 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SPRING TO DRG NO QX 1512 LF 9911358820 Description : SPRING TO DRG NO QX 1512 LF 9911358820() Specification : SPRING TO DRG NO. QX-1512 R Nonestab
Category : p
Grade : 3
Size : S
462 SAI BALAJI INDUSTRIES
SR. NO. 24, PLOT NO. 2, OPP KONARK EVREKA, SAINATH NAGAR, KHARADI PUNE MAHARASHTRA
PIN1 : 411014
Phone No. : MOB: 9623565522
GSTIN : 27AIAPB9752G2ZB 		AIAPB9752G

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TAIL UNIT 8A WITH CAP() DRG.NO.CQA(A)/AMN/2906 PT.NO.ITV-26 SPECN.CQA(A) 2324(i) C Not Estab.
2) TAIL UNIT 11A FOR 81MM ILLG. MK-II() DRG.NO ARDE 2222 DET 4 PT NO ITV 38A SPECN: CQA(A) 2346 (d) C Not Estab.
3) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.() CQA(A) 2328 (c) C Not Estab.
4) SET OF FIVE COMPONENTS UPPER SET OF 51MM ILLG.() CQA(A) 2328 & CQA(A) 2332 C Not Estab.
Category : P
Grade : III
Size : S
463 UNITED ENGINEERING ENTERPRISES
151/6/1, NARASINGHA DUTTA ROAD, HOWRAH, WEST BENGAL
PIN1 : 711101
Phone No. : MOB NO-9830106913,9830979777
GSTIN : 19AGOPD6790Q1ZD 		CALS24549A

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) SCREW SPECIAL (FINISHED) FOR RIFLE 5.56MM INSAS() AS PER DRAWING C Not Estab.
Category : P
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PIPE WITH FILTER() DRG.NO.172.36.048CB-1A C NOT ESTABLISHED
Category : S
Grade : III
Size : S
464 SHEKASA ENGINEERING CO.PVT.LTD.
182,METAL HOUSE OPP. COTTON EXCHANGE , KALBADEVI ROAD MUMBAI 182, METAL HOUSE OPP. COTTON EXCHANGE, KALBADEVI ROAD MUMBAI MUMBAI Maharashtra
PIN1 : 400002
Phone No. : 2202413146
GSTIN : 27AAACS7426F1ZE 		MUMS29199C

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) STAINLESS STEEL ERW PIPE AS PER DRG. NO. V548-0129-4019() Specification : AS PER DRG. NO. V548-0129-4019 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL TUBE 12X10MM IS3074 SEAMLESS LF 0133055127 Description : STEEL TUBE 12X10MM IS3074 SEAMLESS LF 0133055127() Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN R Nonestab
Category : p
Grade : 3
Size : S
465 GOCL CORPORATION LIMIED
Kukatpally, Post Bag No. 4, Sanathnagar (IE) P.O., Hyderabad, Telangana
PIN1 : 500018
Phone No. : 9140-23810671/ 79
GSTIN : 36AABCG8433B1ZX 		HYDI00011E

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE HEAD UNIFOIL TYPE TO DESIGNERS REF NO. CQA(A)/AMN/2875 PART NO. IQX 971() DESIGNERS REF NO. CQA(A)/AMN/2875 PART NO. IQX 971 C Estab.
2) ALUMINIUM SHELL 7 MM Ø,37 MM LENGTH (PRODUCT OF IDL HYD.) ISRO NO. TTG:IPD:04:86 PAGE-11 PARA 3.2.11() ISRO NO. TTG:IPD:04:86 PAGE-11 PARA 3.2.11 C Estab.
3) IDL FUZE HEAD(COMBS)(WTHOUT BRIDGE WIRE SOLDERING AND COATING OF COMPOSITION)() AS PER IDL SPECN. C Estab.
Category : P
Grade : II
Size : L
466 Isgec Heavy Engineering Limited
Radaur Road, Yamunanagar, Haryana, India Radaur Road yamunanagar Haryana
PIN1 : 135001
Phone No. : 661140
GSTIN : 06AAACT5540K1ZB 		RTKT03152C

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081008224 MOUNTING BODY TO DRG NO 1142716[90]() Specification : MOUNTING BODY TO DRG.NO. 1142716 C Nonestab
Category :
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) 9081008222 SET OF TRAIL BODY LEFT and RIGHT[90]() Specification : SET OF TRAIL BODY (LEFT & RIGHT )TO DRG.NO.1145181 & 1145186 C Nonestab
Category :
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) 9073200282 MACHINING OF T 90 CRADLE TO DRG NO GCF 20A SK 885 SHT 1 TO 6 AS PER QAP SCOPE OF WORK[90]() Specification : MACHINING OF T-90 CRADLE TO DRG.NO.GCF-20A-SK-885,SHT 1 TO 6 AS PER QAP & SCOPE OF WORK. C Nonestab
Category :
Grade : Grade III
Size : L
467 MAHALAXMI METAL CORPORATION
5 TRIMBAK PARSHURAM STREET , 6TH KUMBHARWADA MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 66362320
GSTIN : 27AFAPM9060P1ZW 		MUMK10089E

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) STAINLESS STEEL ERW PIPE AS PER DRG. NO. V548-0129-4019() Specification : AS PER DRG. NO. V548-0129-4019 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) COPPER TO ASTM B 152 C10200 O PURITY 99 point 95 percentage MIN TEMPER ANNEALING O TENSILE ST 205 TO 260 MPA ROCKWELL HARDNESS 65 MAX SIZE L 500MM W 189 point 50 MM OR ITS MULTIPLE WIDTH THICKNESS 2 plus or minus 0 point 1 MM[01]() Specification : COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 189.50 MM OR ITS MULTIPLE WIDTH, C Estab
Category :
Grade : Grade III
Size : S
468 M/s A.S.HASANALI & CO.,MUMBAI
37,KOLSA STREET,PYDHONIE MUMBAI MUMBAI
PIN1 : 400003
Phone No. : 09819189494
GSTIN : 27AAEFA5932B1ZV 		MUMA22648D

Download 		1) Ordnance Factory Nalanda
Name Specification Use Status
1) TIN FOIL() OFN/BMCS/M92/TIN FOIL C Estab.
2) TIN FOIL() OFN/BMCS/M92/TIN FOIL C Estab.
Category : DDP
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD TIN FOIL DECU 5 to 10MM WIDE x 0point04 to 0point05 MM THICK LF 0832260912 Description : LEAD TIN FOIL DECU 5 to 10MM WIDE x 0point04 to 0point05 MM THICK LF 0832260912() Specification : LEAD TIN FOIL DECU 5 to 10mm wide,0point04 to 0point05 MM thick and not longer than 300mm to drg no. 04-13x2454-02005 to spec STA7Tx2-Sep 1945 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK Description : 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK() Specification : SPECN. NO. JSS 9535-06 P Estab
2) 0801789173 SEAL LEAD SIZE 10 MM DIA Description : 0801789173 SEAL LEAD SIZE 10 MM DIA() Specification : SPECN. IS: 13923- 1993 (AMDT. 1) REAFFIRMED-1997 P Estab
3) 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK. Description : 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK.() Specification : SPECN.IS-405 (PART-1):1992 (THIRD REV.) P Estab
4) 0800390677 STRIP LEAD CHEM PURP 35 MM Description : 0800390677 STRIP LEAD CHEM PURP 35 MM() Specification : IS: 405-1992 P Estab
5) 0800360086 STRIP LEAD GEN PURP 35 MMW Description : 0800360086 STRIP LEAD GEN PURP 35 MMW() Specification : IS: 405 (PART-2) -1992 IN REEL SIZE 3 TO 10 KGS. P Estab
6) 0800110125 WIRE LEAD Description : 0800110125 WIRE LEAD() Specification : GOST 5655-67. GRADE OF LEAD TO SPECN. GOST 3778-77 P Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SEALS LEAD 10 MM DIA() Specification : IND/GS/783 R Estab
2) LEAD TIN FOIL 571.5X343X0.038MM THICK() Specification : JSS: 9535-06:2010 (REV 2 ) R Estab
Category : p
Grade : 3
Size : S
469 MACHINO TECH INDUSTRY
Plot No. 4, Bakery Road, Belgharia Kolkata WEST BENGAL
PIN1 : 700056
Phone No. : (033) 2564-7659, 9830054095
GSTIN : 19AAFFM1823J1Z8 		CALMO4591G

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) Machining of Cartridge Case() As per specification/Drawing C Estab.
2) Machining of Steel Blanks() As per specification/Drawing C Estab.
3) Machining of Nose Adapter() As per specification/Drawing C Estab.
Category : P
Grade : I
Size : S
1) Metal and Steel Factory
Name Specification Use Status
1) Machining of Cartridge Case() As per specification/Drawing C Estab.
2) Machining of Steel Blanks() As per specification/Drawing C Estab.
3) Machining of Adapter() As per specification/Drawing C Estab.
4) Machining of Cartridge Case() As per specification/Drawing C Estab.
5) Machining of Steel Blanks() As per specification/Drawing C Estab.
6) Machining of Adapter() As per specification/Drawing C Estab.
Category : P
Grade : I
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) CLEANING BRUSH (HARD) GF. 215078 IRCL 579 IN F/C[71]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BUSH TO DRG NO 9 A 621 05 015[72]() Specification : BUSH TO DRG NO 9-A-621.05.015 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Supporting Bracket Assy.Drg.No.F1303-029151() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Supporting Bracket Assy.Drg.No.F1303-029151[71]() Specification : AS PER DRG.& SPECIFICATION C Nonestab
2) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
3) HAMMER TO DRG. NO: F-1312-190230 IN FINISHED CONDITION[71]() Specification : AS PER DRAWING C Nonestab
4) LEVER SEAR TO DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL[70]() Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL C Nonestab
5) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION C Nonestab
6) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
7) EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC[70]() Specification : AS PER DRAWING C Nonestab
8) BUSH TO DRG NO 9-A-621.05.016[72]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709[63]() Specification : BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709, P Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HAMMER CTM 0174[70]() Specification : HAMMER IN F/C AS PER DRG. NO. CTM-0174 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) SUPPORTING RING FRONT IN F C FOR TU -1111 Description : SUPPORTING RING FRONT IN F C FOR TU -1111() Specification : DET.8 TO DRG NO.ARDE-2139 C Estab
2) SUPPORTING RING (LARGE) FOR BTU 450 (2211) IN F.C. Description : SUPPORTING RING LARGE FOR BTU 450() Specification : DRG NO- SK 2923 SHEET NO 4 C Estab
3) SUPPORTING RING (MEDIUM) IN F.C. FOR BTU 450 Description : SUPPORTING RING (MEDIUM) FOR BTU-450 (2211) IN F.C.() Specification : DRG NO- SK-2923 C Estab
4) END COVER IN F C FOR TU-1111 Description : END COVER IN F C FOR TU-1111() Specification : DET.10 TO DRG NO.ARDE-2139 C Estab
5) RIB ASSY.FRONT IN F C FOR TU-1111 Description : RIB ASSY.FRONT IN F C FOR TU-1111() Specification : DET.11 TO DRG NO.ARDE-2139 C Estab
6) RIB ASSY.MIDDLE IN F C FOR TU-1111 Description : RIB ASSY.MIDDLE IN F C FOR TU-1111() Specification : DET.11 TO DRG.NO.ARDE-2139 C Estab
7) RIB ASSY.REAR IN F C FOR TU -1111 Description : RIB ASSY.REAR IN F C FOR TU -1111() Specification : DET.11 TO DRG NO. ARDE-2139 C Estab
8) LUG ANCHORING ASSY.IN F C FOR TU-1111 Description : LUG ANCHORING ASSY.IN F C FOR TU-1111() Specification : DET.69 TO DRG NO.ARDE-2139 C Estab
9) .Spring Return in F C for TU-1111. Description : .Spring Return in F C for TU-1111.() Specification : Det-49 to Drg No.ARDE-2139(Issue-1) C Estab
10) WASHER FRONT FOR TU 1111 IN F.C. Description : WASHER FRONT FOR TU 1111() Specification : DRG NO- ARDE 2139 DET NO-21 C Estab
11) BRACKET FOR RETURN SPRING IN F C FOR TU-1111 Description : BRACKET FOR RETURN SPRING IN F C FOR TU-1111() Specification : DET.32 TO DRG NO.ARDE-2139 C Estab
12) STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111 Description : STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
13) PLUNGER ASSY.IN F C FOR TU-1111 Description : PLUNGER ASSY.IN F C FOR TU-1111() Specification : DET.35 TO DRG NO.ARDE-2139 C Estab
14) Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139 Description : Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139() Specification : Det-45 to Drg No.ARDE-2139 C Estab
15) WASHER IN FC FOR TU-1111 Description : WASHER IN FC FOR TU-1111() Specification : DET NO.50 TO DRG.NO ARDE-2139 C Estab
16) TAB WASHER IN F C FOR TU-1111 Description : TAB WASHER IN F C FOR TU-1111() Specification : DET.51 TO DRG.NO.ARDE-2139 C Estab
17) VANE SPINDLE ASSY IN F C FOR TU-1111 Description : VANE SPINDLE ASSY IN F C FOR TU-1111() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
18) ADAPTER BLANKING FOR TU-1111 Description : ADAPTER BLANKING FOR TU-1111() Specification : DRG.NO.ARDE-2139 DET. NO.58 IN F.C C Estab
19) Clip Retaining in F C for TU-1111. Description : Clip Retaining in F C for TU-1111.() Specification : Det-62 to Drg No.ARDE-2139 C Estab
20) PIN VANE FOR TAIL UNIT 1111 IN F.C. Description : PIN VANE FOR TAIL UNIT 1111() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
21) PIVOT LEVER LOCKING FOR TAIL UNIT -1111 IN F.C. Description : PIVOT LEVER LOCKING FOR TAIL UNIT -1111() Specification : DRG.NO.ARDE 2139, DET.NO.48 C Estab
22) CONE RING REAR IN FC FOR TR 250 Description : CONE RING REAR IN FC FOR TR 250() Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C C Estab
23) COLLER IN F C FOR TU -1111 Description : COLLER IN F C FOR TU -1111() Specification : DRG.NO.ARDE-2139 DET.26 C Estab
24) LOCATING PIN FOR TU 1111 IN F.C. Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 SHT 3 C Estab
25) SUPPORT WASHER FOR TU1111 IN F.C. Description : SUPPORT WASHER FOR TU1111() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
26) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111 Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111() Specification : DET.57 SHT.3 TO DRG NO.ARDE-2139 C Estab
27) HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111 IN F.C. Description : HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111() Specification : DRG.NO.ARDE 2139, DET.NO.67 C Estab
28) CLOSING DISC ASSY IN FC FOR RTU 1121 Description : CLOSING DISC ASSY IN FC FOR RTU 1121() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
29) HOUSING BLOCK AND CLEVIES FOR RTU 1121 (ANCHORING MECHANISM) Description : HOUSING BLOCK AND CLEVIES FOR RTU 1121() Specification : HOUSING BLOCK AND CLEVIS UNIT ASSY.(ANCHORING MECHANISM) DET NO-1 TO DRG.NO.ARDE-1947,SPECN.NO.ARDE/SPECN/500 IN FINISHED CONDITION C Estab
30) CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450) Description : CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450)() Specification : DET.39 TO DRG NO.ARDE-2121 C Estab
31) Spring Return in F C for Tail Unit 2211(BTU-450). Description : Spring Return in F C for Tail Unit 2211(BTU-450).() Specification : Det.4 to Drg No.ARDE-2121 C Estab
32) PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450) Description : PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450)() Specification : DET.38 TO DRG NO.2121 C Estab
33) Pin Spindle Locking in F C for Tail Unit (BTU-450). Description : Pin Spindle Locking in F C for Tail Unit (BTU-450).() Specification : Det.47 to Drg No.ARDE-2121 C Estab
34) END COVER WELDING SUB ASSY. FOR BTU-450 IN F.C. Description : END COVER WELDING SUB ASSY. FOR BTU-450() Specification : DET-1, SHT-10, ARDE-2121 C Estab
35) VANE SPINDLE FOR BTU-450 IN F.C. Description : VANE SPINDLE FOR BTU-450() Specification : DET-32, ARDE-2121 C Estab
36) PIVOT LEVER LOCKING ASSY FOR BTU-450 Description : PIVOT LEVER LOCKING ASSY FOR BTU-450 IN F.C.() Specification : DET-7, ARDE-2121 C Estab
37) PLUNGER ASSY FOR BTU-450 IN F.C. Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
38) Tab Washer in F C for Tail Unit (BTU-450) Description : Tab Washer in F C for Tail Unit (BTU-450)() Specification : Det.50 to Drg No.ARDE-2121 C Estab
39) COLLAR IN F C FOR TAIL UNIT (BTU-450) Description : COLLAR IN F C FOR TAIL UNIT (BTU-450)() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
40) PIN IN F C FOR TAIL UNIT (BTU -450) Description : PIN IN F C FOR TAIL UNIT (BTU -450)() Specification : DET.18 TO DRG NO. ARDE-2121 C Estab
41) Stopper for Lever Locking in F C for Tail Unit (BTU-450) Description : Stopper for Lever Locking in F C for Tail Unit (BTU-450)() Specification : Det.5 to Drg No.ARDE-2121 C Estab
42) Lever Locking Assy. in F C for Tail Unit (BTU-450 Description : Lever Locking Assy. in F C for Tail Unit (BTU-450() Specification : Det.8 Sht-1 to Drg No.ARDE-2121 C Estab
43) ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450) Description : ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450)() Specification : DET.44 TO DRG NO. ARDE-2121 C Estab
44) HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450) Description : HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450)() Specification : DRG.NO.ARDE-2121 DET.48 C Estab
45) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450) Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450)() Specification : DRG.NO.ARDE-2121 DET.52 SHT.-3 C Estab
46) LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450) Description : LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450)() Specification : DET.15 TO DRG NO.ARDE-2121 C Estab
47) TRANSIT CLIP ASSY. Description : TRANSIT CLIP ASSY.() Specification : DRG. NO- ARDE 1947 DET NO- 68 C Estab
48) CONE RING SMALL IN FC FOR RTU-1121 Description : CONE RING SMALL IN FC FOR RTU-1121() Specification : DET-61 , ARDE-1947 C Estab
49) CONE RING LARGE & PIN LOCKING FOR RTU-1121 Description : CONE RING LARGE & PIN LOCKING FOR RTU-1121() Specification : ARDE 1947, DET.NO.62 C Estab
50) STUD ASSY IN F.C Description : STUD ASSY IN F.C() Specification : DRG NO- ARDE 1947 DET 63 C Estab
51) FUNNEL ASSY, DET NO 57 ARDE 1947 IN F.C. Description : FUNNEL ASSY, DET NO 57 ARDE 1947() Specification : AS PER DRAWING C Estab
52) KIT ARMING AND FUSING,SEC REF NO 312G/1477 DET 73 Description : KIT ARMING AND FUSING, DET NO 73 IN F.C.() Specification : AS PER DRAWING C Estab
53) CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250 Description : CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250() Specification : CONE RING FRONT ASSY.;DET.NO.:23 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION C Estab
54) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
55) Flexible Drive Adopter in F C for TU TB 250 Description : Flexible Drive Adopter in F C for TU TB 250() Specification : Det.12 to Drg No.ARDE-9501-03 C Estab
56) ARMING WIRE GUIDE FOR TAIL UNIT TB 250 IN F.C. Description : ARMING WIRE GUIDE FOR TAIL UNIT TB 250() Specification : DRG NO- ARDE9501-03 DET NO- 37 C Estab
57) END COVER FOR BTU-250 IN F C() Specification : DRG NO.ARDE-9501-03 DET 7 C Estab
58) ASSY OF ADAPTOR AND CONE SPIDER IN FC FOR ADAPTOR TU-37 MK-II Description : ASSY OF ADAPTOR AND CONE SPIDER IN FC FOR ADAPTOR TU-37 MK-II() Specification : OFDC SK.NO.2903 C Estab
59) ARMING SPINDLE FOR BTU 450 Description : ARMING SPINDLE FOR BTU 450() Specification : DET- 34, ARDE-2121 C Estab
60) PLUG I IN F C FOR PLUG-I Description : PLUG I IN F C FOR PLUG-I() Specification : DRG.PT.NO.ITV-164 C Estab
61) Plug II to in F C. Description : Plug II to in F C.() Specification : Drg.Pt.No.ITV-165 C Estab
62) TRACER NUT IN FC Description : TRACER NUT IN FC() Specification : DRG.NO.4-025998 DET 036 C Estab
63) WIND SHIELD FOR FUZE DA 5A Description : WIND SHIELD FOR FUZE DA 5A() Specification : DRG.Pt.NO.IQX-1010 C Estab
64) SAFETY CLIP NO. 1 Description : SAFETY CLIP NO.1 MK-1 (HARD)SEC REF. NO. 312G/1483 DET NO FOR KIT ARMING & FUZING() Specification : AS PER DRAWING C Estab
65) DETENT FOR FUZE 162 WITH OFDC MATERIAL Description : DETENT FOR FUZE 162 WITH OFDC MATERIAL() Specification : DRG.PT.NO.QX-356 C Estab
66) TAG, PIN & WASHER ASSEMBLY IN FC WITH OFDC MATL. FOR FUZE DA5A Description : TAG, PIN & WASHER ASSEMBLY IN FC WITH OFDC MATL. FOR FUZE DA5A() Specification : DRG PT NO IQX-101 C Estab
67) CLIP FOR FUZE 162 Description : CLIP FOR FUZE 162() Specification : DRG.PT.NO.439 C Estab
68) CDSC 0.5KG MK NI(IN) BODY & LID IN FC FOR CDSC Description : CDSC 0.5KG MK NI(IN) BODY & LID IN FC FOR CDSC() Specification : DRG.NO.SK-172(b) C Estab
69) CONE RING ASSEMBLY OFDC SK NO. 2420 IN F.C.() Specification : AS PER DRAWING C Estab
70) FIN ASSY FOR BTU -450 Description : FIN ASSY FOR BTU -450() Specification : AS PER OFDC SPECIFICATION C Estab
71) CONE RING AS PER DRG NO. OFDC SK NO. 2916 SHEET 7 IN F.C. Description : CONE RING() Specification : AS PER DRAWING C Estab
72) SUPPORTING RING (SMALL) IN F.C. FOR BTU 450 Description : SUPPORTING RING (SMALL) FOR BTU-450 (2211) IN F.C.() Specification : DRG NO- SK-2923 C Estab
73) .FIN ASSY DET NO.1 DRG NO. ARDE-2121 IN F.C..() Specification : AS PER DRAWING C Estab
74) HOT ROLLED SHEET PLATE AS PER GOST 14959-1979() AS PER SPECIFICATION C Estab
75) CONE RING & KEY WELDING DET NO 1 IN F.C.() Specification :AS PER DRAWING C Estab
76) FIN ASSY (WELDING) DET NO. 13 IN F.C.() Specification : AS PER DRAWING C Estab
77) STRIKER DRG NO. QX 331IN F.C.() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) SUPPORTING RING FRONT IN F C FOR TU -1111 Description : SUPPORTING RING FRONT IN F C FOR TU -1111() Specification : DET.8 TO DRG NO.ARDE-2139 C Estab
2) SUPPORTING RING (LARGE) FOR BTU 450 (2211) IN F.C. Description : SUPPORTING RING LARGE FOR BTU 450() Specification : DRG NO- SK 2923 SHEET NO 4 C Estab
3) SUPPORTING RING (MEDIUM) IN F.C. FOR BTU 450 Description : SUPPORTING RING (MEDIUM) FOR BTU-450 (2211) IN F.C.() Specification : DRG NO- SK-2923 C Estab
4) END COVER IN F C FOR TU-1111 Description : END COVER IN F C FOR TU-1111() Specification : DET.10 TO DRG NO.ARDE-2139 C Estab
5) RIB ASSY.FRONT IN F C FOR TU-1111 Description : RIB ASSY.FRONT IN F C FOR TU-1111() Specification : DET.11 TO DRG NO.ARDE-2139 C Estab
6) RIB ASSY.MIDDLE IN F C FOR TU-1111 Description : RIB ASSY.MIDDLE IN F C FOR TU-1111() Specification : DET.11 TO DRG.NO.ARDE-2139 C Estab
7) RIB ASSY.REAR IN F C FOR TU -1111 Description : RIB ASSY.REAR IN F C FOR TU -1111() Specification : DET.11 TO DRG NO. ARDE-2139 C Estab
8) LUG ANCHORING ASSY.IN F C FOR TU-1111 Description : LUG ANCHORING ASSY.IN F C FOR TU-1111() Specification : DET.69 TO DRG NO.ARDE-2139 C Estab
9) .Spring Return in F C for TU-1111. Description : .Spring Return in F C for TU-1111.() Specification : Det-49 to Drg No.ARDE-2139(Issue-1) C Estab
10) WASHER FRONT FOR TU 1111 IN F.C. Description : WASHER FRONT FOR TU 1111() Specification : DRG NO- ARDE 2139 DET NO-21 C Estab
11) BRACKET FOR RETURN SPRING IN F C FOR TU-1111 Description : BRACKET FOR RETURN SPRING IN F C FOR TU-1111() Specification : DET.32 TO DRG NO.ARDE-2139 C Estab
12) STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111 Description : STOPPER FOR LEVEL LOCKING IN F C FOR TU-1111() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
13) PLUNGER ASSY.IN F C FOR TU-1111 Description : PLUNGER ASSY.IN F C FOR TU-1111() Specification : DET.35 TO DRG NO.ARDE-2139 C Estab
14) Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139 Description : Lever Locking Assy. in F C for TU-1111. Det-45 to Drg No.ARDE-2139() Specification : Det-45 to Drg No.ARDE-2139 C Estab
15) WASHER IN FC FOR TU-1111 Description : WASHER IN FC FOR TU-1111() Specification : DET NO.50 TO DRG.NO ARDE-2139 C Estab
16) TAB WASHER IN F C FOR TU-1111 Description : TAB WASHER IN F C FOR TU-1111() Specification : DET.51 TO DRG.NO.ARDE-2139 C Estab
17) VANE SPINDLE ASSY IN F C FOR TU-1111 Description : VANE SPINDLE ASSY IN F C FOR TU-1111() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
18) ADAPTER BLANKING FOR TU-1111 Description : ADAPTER BLANKING FOR TU-1111() Specification : DRG.NO.ARDE-2139 DET. NO.58 IN F.C C Estab
19) Clip Retaining in F C for TU-1111. Description : Clip Retaining in F C for TU-1111.() Specification : Det-62 to Drg No.ARDE-2139 C Estab
20) PIN VANE FOR TAIL UNIT 1111 IN F.C. Description : PIN VANE FOR TAIL UNIT 1111() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
21) PIVOT LEVER LOCKING FOR TAIL UNIT -1111 IN F.C. Description : PIVOT LEVER LOCKING FOR TAIL UNIT -1111() Specification : DRG.NO.ARDE 2139, DET.NO.48 C Estab
22) CONE RING REAR IN FC FOR TR 250 Description : CONE RING REAR IN FC FOR TR 250() Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C C Estab
23) COLLER IN F C FOR TU -1111 Description : COLLER IN F C FOR TU -1111() Specification : DRG.NO.ARDE-2139 DET.26 C Estab
24) LOCATING PIN FOR TU 1111 IN F.C. Description : LOCATING PIN FOR TU 1111() Specification : DRG NO- ARDE 2139 DET 6 SHT 3 C Estab
25) SUPPORT WASHER FOR TU1111 IN F.C. Description : SUPPORT WASHER FOR TU1111() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
26) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111 Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-1111() Specification : DET.57 SHT.3 TO DRG NO.ARDE-2139 C Estab
27) HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111 IN F.C. Description : HOUSING FOR REAR BEARING FOR TAIL UNIT- 1111() Specification : DRG.NO.ARDE 2139, DET.NO.67 C Estab
28) CLOSING DISC ASSY IN FC FOR RTU 1121 Description : CLOSING DISC ASSY IN FC FOR RTU 1121() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
29) HOUSING BLOCK AND CLEVIES FOR RTU 1121 (ANCHORING MECHANISM) Description : HOUSING BLOCK AND CLEVIES FOR RTU 1121() Specification : HOUSING BLOCK AND CLEVIS UNIT ASSY.(ANCHORING MECHANISM) DET NO-1 TO DRG.NO.ARDE-1947,SPECN.NO.ARDE/SPECN/500 IN FINISHED CONDITION C Estab
30) CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450) Description : CLIP RETAINING IN F C FOR TAIL UNIT 2211 (BTU-450)() Specification : DET.39 TO DRG NO.ARDE-2121 C Estab
31) Spring Return in F C for Tail Unit 2211(BTU-450). Description : Spring Return in F C for Tail Unit 2211(BTU-450).() Specification : Det.4 to Drg No.ARDE-2121 C Estab
32) PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450) Description : PIN VANE IN F C FOR TAIL UNIT 2211 (BTU-450)() Specification : DET.38 TO DRG NO.2121 C Estab
33) Pin Spindle Locking in F C for Tail Unit (BTU-450). Description : Pin Spindle Locking in F C for Tail Unit (BTU-450).() Specification : Det.47 to Drg No.ARDE-2121 C Estab
34) END COVER WELDING SUB ASSY. FOR BTU-450 IN F.C. Description : END COVER WELDING SUB ASSY. FOR BTU-450() Specification : DET-1, SHT-10, ARDE-2121 C Estab
35) VANE SPINDLE FOR BTU-450 IN F.C. Description : VANE SPINDLE FOR BTU-450() Specification : DET-32, ARDE-2121 C Estab
36) PIVOT LEVER LOCKING ASSY FOR BTU-450 Description : PIVOT LEVER LOCKING ASSY FOR BTU-450 IN F.C.() Specification : DET-7, ARDE-2121 C Estab
37) PLUNGER ASSY FOR BTU-450 IN F.C. Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
38) Tab Washer in F C for Tail Unit (BTU-450) Description : Tab Washer in F C for Tail Unit (BTU-450)() Specification : Det.50 to Drg No.ARDE-2121 C Estab
39) COLLAR IN F C FOR TAIL UNIT (BTU-450) Description : COLLAR IN F C FOR TAIL UNIT (BTU-450)() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
40) PIN IN F C FOR TAIL UNIT (BTU -450) Description : PIN IN F C FOR TAIL UNIT (BTU -450)() Specification : DET.18 TO DRG NO. ARDE-2121 C Estab
41) Stopper for Lever Locking in F C for Tail Unit (BTU-450) Description : Stopper for Lever Locking in F C for Tail Unit (BTU-450)() Specification : Det.5 to Drg No.ARDE-2121 C Estab
42) Lever Locking Assy. in F C for Tail Unit (BTU-450 Description : Lever Locking Assy. in F C for Tail Unit (BTU-450() Specification : Det.8 Sht-1 to Drg No.ARDE-2121 C Estab
43) ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450) Description : ARMING WIRE ASSY IN F C FOR TAIL UNIT (BTU-450)() Specification : DET.44 TO DRG NO. ARDE-2121 C Estab
44) HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450) Description : HOUSING FOR REAR BEARING IN F C FOR TU -2211(BTU-450)() Specification : DRG.NO.ARDE-2121 DET.48 C Estab
45) FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450) Description : FLEXIBLE DRIVE ADAPTER IN F C FOR TU-2211(BTU-450)() Specification : DRG.NO.ARDE-2121 DET.52 SHT.-3 C Estab
46) LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450) Description : LOCKING SLEEVE IN F C FOR TAIL UNIT (BTU-450)() Specification : DET.15 TO DRG NO.ARDE-2121 C Estab
47) TRANSIT CLIP ASSY. Description : TRANSIT CLIP ASSY.() Specification : DRG. NO- ARDE 1947 DET NO- 68 C Estab
48) CONE RING SMALL IN FC FOR RTU-1121 Description : CONE RING SMALL IN FC FOR RTU-1121() Specification : DET-61 , ARDE-1947 C Estab
49) CONE RING LARGE & PIN LOCKING FOR RTU-1121 Description : CONE RING LARGE & PIN LOCKING FOR RTU-1121() Specification : ARDE 1947, DET.NO.62 C Estab
50) STUD ASSY IN F.C Description : STUD ASSY IN F.C() Specification : DRG NO- ARDE 1947 DET 63 C Estab
51) FUNNEL ASSY, DET NO 57 ARDE 1947 IN F.C. Description : FUNNEL ASSY, DET NO 57 ARDE 1947() Specification : AS PER DRAWING C Estab
52) KIT ARMING AND FUSING,SEC REF NO 312G/1477 DET 73 Description : KIT ARMING AND FUSING, DET NO 73 IN F.C.() Specification : AS PER DRAWING C Estab
53) CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250 Description : CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250() Specification : CONE RING FRONT ASSY.;DET.NO.:23 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION C Estab
54) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
55) Flexible Drive Adopter in F C for TU TB 250 Description : Flexible Drive Adopter in F C for TU TB 250() Specification : Det.12 to Drg No.ARDE-9501-03 C Estab
56) ARMING WIRE GUIDE FOR TAIL UNIT TB 250 IN F.C. Description : ARMING WIRE GUIDE FOR TAIL UNIT TB 250() Specification : DRG NO- ARDE9501-03 DET NO- 37 C Estab
57) END COVER FOR BTU-250 IN F C() Specification : DRG NO.ARDE-9501-03 DET 7 C Estab
58) ASSY OF ADAPTOR AND CONE SPIDER IN FC FOR ADAPTOR TU-37 MK-II Description : ASSY OF ADAPTOR AND CONE SPIDER IN FC FOR ADAPTOR TU-37 MK-II() Specification : OFDC SK.NO.2903 C Estab
59) ARMING SPINDLE FOR BTU 450 Description : ARMING SPINDLE FOR BTU 450() Specification : DET- 34, ARDE-2121 C Estab
60) PLUG I IN F C FOR PLUG-I Description : PLUG I IN F C FOR PLUG-I() Specification : DRG.PT.NO.ITV-164 C Estab
61) Plug II to in F C. Description : Plug II to in F C.() Specification : Drg.Pt.No.ITV-165 C Estab
62) TRACER NUT IN FC Description : TRACER NUT IN FC() Specification : DRG.NO.4-025998 DET 036 C Estab
63) WIND SHIELD FOR FUZE DA 5A Description : WIND SHIELD FOR FUZE DA 5A() Specification : DRG.Pt.NO.IQX-1010 C Estab
64) SAFETY CLIP NO. 1 Description : SAFETY CLIP NO.1 MK-1 (HARD)SEC REF. NO. 312G/1483 DET NO FOR KIT ARMING & FUZING() Specification : AS PER DRAWING C Estab
65) DETENT FOR FUZE 162 WITH OFDC MATERIAL Description : DETENT FOR FUZE 162 WITH OFDC MATERIAL() Specification : DRG.PT.NO.QX-356 C Estab
66) TAG, PIN & WASHER ASSEMBLY IN FC WITH OFDC MATL. FOR FUZE DA5A Description : TAG, PIN & WASHER ASSEMBLY IN FC WITH OFDC MATL. FOR FUZE DA5A() Specification : DRG PT NO IQX-101 C Estab
67) CLIP FOR FUZE 162 Description : CLIP FOR FUZE 162() Specification : DRG.PT.NO.439 C Estab
68) CDSC 0.5KG MK NI(IN) BODY & LID IN FC FOR CDSC Description : CDSC 0.5KG MK NI(IN) BODY & LID IN FC FOR CDSC() Specification : DRG.NO.SK-172(b) C Estab
69) CONE RING ASSEMBLY OFDC SK NO. 2420 IN F.C.() Specification : AS PER DRAWING C Estab
70) FIN ASSY FOR BTU -450 Description : FIN ASSY FOR BTU -450() Specification : AS PER OFDC SPECIFICATION C Estab
71) CONE RING AS PER DRG NO. OFDC SK NO. 2916 SHEET 7 IN F.C. Description : CONE RING() Specification : AS PER DRAWING C Estab
72) SUPPORTING RING (SMALL) IN F.C. FOR BTU 450 Description : SUPPORTING RING (SMALL) FOR BTU-450 (2211) IN F.C.() Specification : DRG NO- SK-2923 C Estab
73) .FIN ASSY DET NO.1 DRG NO. ARDE-2121 IN F.C..() Specification : AS PER DRAWING C Estab
74) HOT ROLLED SHEET PLATE AS PER GOST 14959-1979() AS PER SPECIFICATION C Estab
75) CONE RING & KEY WELDING DET NO 1 IN F.C.() Specification :AS PER DRAWING C Estab
76) FIN ASSY (WELDING) DET NO. 13 IN F.C.() Specification : AS PER DRAWING C Estab
77) STRIKER DRG NO. QX 331IN F.C.() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SCREW SET SLOTTED HEAD,FULL DOGPOINT NO.2BA Description : SCREW SET SLOTTED HEAD,FULL DOGPOINT NO.2BA() Specification : DESIGNERS REF.NO.CIA/AMN/885,DC NO.33833-A RETRACED DT.19.12.87 C Estab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY CAP TO DRG NO IQX 14 IN FC WITHOUT PAINTING AND PASSIVATION FOR FUZE 162 MK 9[63]() Specification : SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9 C Nonestab
2) SAFETY CAP IN FC MC WITHOUT PAINTING AND PASSIVATION TO DRG NO IAFD 44 PT NO IQX 14 FOR FUZE 162 MK 8[63]() Specification : SAFETY CAP IN F/C MC WITHOUT PAINTING AND PASSIVATION TO DRG. NO. IAFD-44 PT. NO. IQX-14 DC 35445-A DT 05-02-93 FOR FUZE 162 MK 8 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dumdum
Name Specification Use Status
1) CONE RING IN FINISHED CONDITION FOR TU 1111[62]() Specification : CONE RING,DET NO-6 SHT-2 TO DRG.NO.ARDE-2139 (ISSUE-I) AL NO. 2/95 DT. 11.01.95 IN FINISHED CONDITION C Nonestab
2) CONE RING IN FINISHED CONDITION FOR TU TB 250[62]() Specification : CONE RING ASSEMBLY' FOR TU TB 250 TO DRG.NO. OFDC SK-2420 IN FINISHED CONDITION C Estab
3) FIN ASSY DET NO 1 SHT 7 TO DRG NO ARDE 2121 IN SEMI FINISHED CONDITION UPTO TACK WELDING[62]() Specification : FIN ASSY.DET NO-1 SHT-7 TO DRG.NO.ARDE-2121 IN SEMI-FINISHED CONDITION UPTO TACK WELDING C Estab
4) FIN ASSY WELDING FOR TU 250[62]() Specification : FIN ASSY. (WELDING) DET. NO.-13,SHT.NO.-1 TO DRG.NO.:ARDE 9501-03 IN FINISHED CONDITION (4 TO A SET). C Estab
5) FIN ASSY TO DRG NO ARDE 2139 DET NO 14 WITHOUT PROTECTIVE FINISH FOR TU 1111[62]() Specification : FIN ASSY.TO DRG. NO. ARDE 2139, DET. NO. 14 WITHOUT PROTECTIVE FINISH C Estab
6) CONE RING SMALL FOR RTU 1121[62]() Specification : CONE RING SMALL DET NO-61 TO DRG.NO.ARDE-1947,AL NO.698 DT. 23.02.93 IN FINISHED CONDITION C Estab
7) HOUSING BLOCK AND CLEVIES FOR RTU 1121[62]() Specification : HOUSING BLOCK AND CLEVIS UNIT ASSY.(ANCHORING MECHANISM) DET NO-1 TO DRG.NO.ARDE-1947,SPECN.NO.ARDE/SPECN/500 IN FINISHED CONDITION C Estab
8) CLOSING DISC ASSY IN FC FOR RTU 1121[62]() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Nonestab
9) CONE RING LARGE AND PIN LOCKING FOR RTU 1121[62]() Specification : CONE RING LARGE & PIN LOCATING TU-ASSY. DET NO-62 SHT-1 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
10) CONE RING AND KEY WELDING ASSY FOR BTU 450[62]() Specification : CONE RING & KEY(WELDING ASSY.)TO DET NO-1 SHT-3 TO DRG.NO. ARDE-2121 IN FINISHED CONDITION C Estab
11) CONE RING LARGE AND PIN LOCKING FOR RTU 2231[99]() Specification : CONE RING LARGE & PIN LOCKETING ASSY.TO DRG. NO. ARDE -2239 DET, NO. 4 IN FINISHED CONDITION C Estab
12) CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250[62]() Specification : CONE RING FRONT ASSY.;DET.NO.:23 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION C Estab
13) CONE RING SMALL IN FINISHED CONDITION FOR RTU 2231[62]() Specification : CONE RING SMALL DET NO-7 TO DRG.NO.ARDE-2239,AL NO.21/97 DT. 20.08.97 IN FINISHED CONDITION C Estab
14) CLOSING DISC ASSY IN FINISHED CONDITION FOR RTU 2231[99]() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Nonestab
15) CONE RING REAR IN FC FOR TR 250[62]() Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C C Estab
16) CLOSING RING ASSY IN FINISHED CONDITION FOR TR 250[62]() Specification : CLOSING RING ASSY.;DET.NO.:45 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION C Nonestab
Category : p
Grade : Grade III
Size : S
470 BSL Limited
26, Industrial Area, Gandhi Nagar, Post Box No. 17 Bhilwara Rajasthan
PIN1 : 311001
Phone No. : 01482-246801 to 6, 9352111227
GSTIN : 08AABCB0639G1ZZ 		CALB05106D

Download 		1) Ordnance Clothing Factory Shahjahanpur

Debarred
Name Specification Use Status
1) Shirting Angola Drab Poly Wool 152 cm() IND/TC/4697 R NOT ESTAB.N
2) Fabric Terry Wool TW BG 150 cm() AIRHQ/DQAS/AC079 R NOT ESTAB.
3) Serge BD Poly Wool 142 cm() S/5432/PW/TC-19(a) R NOT ESTAB.
4) Cloth Twill Weave PC (20:80) 250 GSM Greenish Khaki() IND/TC/0159 R NOT ESTAB.
5) 100% Polyester Lining Black() OCFS/POLYESTER LINING BLACK (REV.-01) R NOT ESTAB.
6) Yarn Worsted 30 Tex/2 OG() S/5570/VEST WOOLEN FS/TC-12 As per Appendix-B R NOT ESTAB.
7) Yarn Worsted 80 Tex/3 Dark OG() IND/TC/14048 (e) R NOT ESTAB.
8) Yarn Worsted 80 Tex Dark OG Splicing() IND/TC/14048 (e) R NOT ESTAB.
9) Cloth Cotton Calico White() IS: 1544-1973 (first Rev. Reff.2002 Amend 3) R NOT ESTAB.
10) Cloth Cotton Calico OG() IS: 1544-1973 (first Rev. Reff.2002 Amend 3) R NOT ESTAB.
11) Fabric Nylon 75 GSM Un-dyed 91 cm() ADRDE/SPECN/1980/5(a) & annexure A R NOT ESTAB.
12) Fabric Nylon 37 GM. O/G, 94 CM.() IS: 4726-1984 R NOT ESTAB.
13) Fabric Nylon Low Porosity 52 GMS ODS() ADRDE/SPECN/1983/14 Except Air Porosity Test R NOT ESTAB.
Category : DDP
Grade : I
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) CAMBRIC COTTON WHITE 91 CMS. () IND/TC/0015 (c) R
2) CANVAS COTTON 410 GRM KHAKI 91 CMS.() IS: 1424-1983 V. N0. 4 R
3) CANVAS COTTON 410 GMS. O.G. WP 91 CMS.() IS: 1424-1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972. R Established
4) CANVAS COTTON 545 GMS. SCOURED 91 CMS.() IS: 1424 (VARIETY NO. 3) & MODIFICATION AS PER ANNX. "A" R Established
5) CANVAS COTTON 680 GMS. O.G 91 CMS.() IS: 1424 (VARIETY NO. 2) & IS: 6803FORWTPRF.MODIFICATION AS PER ANNX. "A" R Established
6) CANVAS COTTON 815 GMS. O.G W.P. 91 CMS.() IS: 1424-1983 (VARIETY NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Established
7) CLOTH CALICO COTTON KHAKI 91 CMS.() IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R Established
8) CLOTH CALICO COTTON WHITE 91 CMS.() IS: 5088-1982 (V.NO.3) R Established
9) CLOTH CALICO COTTON WHITE BLEACHED 91 CMS.() IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Established
10) CLOTH CANVAS COTTON 545 GRMS. O.G W.P. 91 CMS. WIDE() IS: 1424-1983 (V.NO.3) AND WATER PROOFNESS TO IS : 6803-1972 R Established
11) CLOTH CANVAS COTTON 680 GR. OG WP 91 CMS.() IS: 1424-1983 (V.NO.2) REAFMD.1995 & WATERPROOFNESS TO IS: 6803 R Established
12) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CM WIDE() IS: 2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95 R Established
13) CLOTH COTTON CANVAS 410 GMS. KHAKI 91 CMS.() IS: 1424-1983 VARIETY NO.4 DULY FLAME PROOFED R Established
14) CLOTH COTTON CLOSELY WOVEN 170 GM WHITE WR 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
15) CLOTH COTTON CLOSELY WOVEN 170 GMS. SAND COLOUR W.R. 91 CMS.() JSS: 8305-5-2000 V.NO. "A" (SHADE NO. 388 OF IS:5) R Established
16) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.() JSS: 8305-5-2000 VARIETY NO. "A" R Established
17) CLOTH COTTON CLOSELY WOVEN 170 GRM DUAL SHADE (OG/ WHITE) WR 91 CMS.() JSS: 8305-5-2000 (FIRST REVISION) R Established
18) CLOTH COTTON CLOSELY WOVEN 235 GRMS. DUAL SHADE (WHITE/OG) W.R. 91 CMS() JSS: 8305-5-2000 (REV.NO. 1) VARIETY "B" R Established
19) CLOTH COTTON CLOSELY WOVEN 310 GM W.R. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
20) CLOTH COTTON DOSUTIE BLUE 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
21) CLOTH COTTON DOSUTIE KHAKI 91 CMS WIDE() IS: 179-1977 (REAFF. 1997) EDITION 3.5 (1998-05) V.NO.4 R Established
22) CLOTH COTTON DOSUTIE O.G. 91 CMS WIDE() IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Established
23) CLOTH COTTON DOSUTIE SCOURED 91CM.() IS: 179-1977 VARIETY NO. 4 R Established
24) CLOTH COTTON DOSUTIE GREEN 91CMS WIDE() IS: 179-1977 V.NO. 4 REAFFIRMED 1997 EDITION 3.5 (1998-05) R Established
25) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1) R Established
26) CLOTH COTTON O.G. W.R.375 GR. FOR CAPES 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. "A" R Established
27) CLOTH COTTON OG WATER REPELENT FOR CAPES WATER PROOF 90 CM() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 95 (V.NO.1) R Established
28) CLOTH DRILL COTTON O.G. 142 CMS.() IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Established
29) CLOTH DRILL COTTON O.G. 91 CMS WIDE PROOFED() IS: 5088 PT.-II LATEST R Established
30) CLOTH DRILL COTTON O.G.142 CMS.() IS: 177-1989 (4th REVISION) REAFFIRMED 1997 V.NO. 3 R Established
31) CLOTH DRILL COTTON WHITE BLEACHED 142 CM V.NO 3.() IS: 177-1989 V.NO.3 R Established
32) CLOTH DUCK COTTON 610 GR. SCOURED 91 CM. WIDE() IS: 1422-1983(V.NO.2) REAFF. 2000 WITH AMDT.NO.1 R Established
33) CLOTH DUCK COTTON 340 GMS O.G. 91 CMS.() IS: 1422 V.NO.4 & MODIFICATION AS PER ANNX. A R Established
34) CLOTH DUCK COTTON 340 GMS O.G. WP 91 CMS() IS: 1422-1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972 R Established
35) CLOTH DUCK COTTON 340 GMS SCOURED 91 CMS() IS: 1422-1983 (V.NO 4) REAFF. 2000 WITH AMDT.NO.1 OF APR., 87 R Established
36) CLOTH DUCK COTTON 340 GMS. SCOURED W.P.--91.4 CM.() IS: 1422-1983 VARIETY NO.4, IS: 6803 LATEST FOR WATER PROOFNESS R Established
37) CLOTH DUCK COTTON 475 GMS. O.G. 91 CMS() IS: 1422-1983 (V.NO.3)REAFFIRMED 2000 WITH AMDT.NO.1 OF APRIL R Established
38) CLOTH DUCK COTTON 475 GMS. O.G. W.P 91 CMVAT DYED() IS: 1422-1983 (V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
39) CLOTH DUCK COTTON 475 GMS SCOURED 91 CMS() IS: 1422-1983 V. NO 3 R Established
40) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS() IS: 1422-1983 V.NO. 3 WATER PROOFNESS TO IS: 6803 LATEST R Established
41) CLOTH DUCK COTTON 475 GMS UNDYED 91 CMS() IS: 1422 V.NO.3 & MODIFICATION AS PER ANNX. A R Established
42) CLOTH DUCK COTTON 475 GR KHAKI 91 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
43) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.() IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT R Established
44) CLOTH DUCK COTTON 475 O.G W.P.AND RP 91 CMS() AS PER REQUIREMENT & SPECIFICATION R Established
45) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS() IS: 1422-1983 V.NO. 2 R Established
46) CLOTH DUCK COTTON 610 GMS. KHAKI W.P. 91 CM.() IS: 1422-1983 V.NO. 2 R Established
47) CLOTH DUCK COTTON 610 GR. KHAKI W.P 76 CM WIDE() IS: 1422-1983 (V.NO.2) (REAFF. 2000) WITH AMDT.NO.1 OF APRIL R Established
48) CLOTH DUCK COTTON 610 GMS. SCOURED W.P. R.P. 91 CMS. WIDE() IS: 1422-1983 V. NO 2 WATER PROOFNESS TO IS: 6803 LATEST R Established
49) CLOTH DUCK COTTON 745 GMS. O.G. W.P. 91 CMS() IS: 1422-1983 (V.NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Established
50) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.() IS: 13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
51) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 91 CM.() IS:13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1) R Established
52) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. OG WP 135 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
53) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS.O.G.91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
54) CLOTH DUCK POLYSTER/COTTON RIP STOP FABRIC (HEAVY) O.G. 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
55) CLOTH DUCK RIP STOP COTTON 610 GMS O.G. W.P. 135 CMS. WIDE() IND/TC/0145 R Established
56) CLOTH DUCK RIP STOP COTTON 610 GRM O.G. W.P. 91 CMS. WIDE() IND/TC/0145 R Established
57) CLOTH MUSLIN WHITE BLEACHED 91 CMS. WIDE() IND/TC/0002(j) R Established
58) CLOTH PLAIN WEAVE POLYESTER & COTTON KHAKI 137 CMS.() OEFC/01/PCK/ 2003 R Established
59) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
60) CLOTH PLAIN WEAVE POLYESTER VISOCOSE DOPE DYED KHAKI WIDTH 138 CMS.() OEFC/01/PCK/ 2003 R Established
61) COTTON DOSUTIE WHITE BLEACHED 91 CMS.() IS: 179-1977 VARIETY NO. 4 R Established
62) COTTON FABRIC S.D. PARA SCOURED 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
63) COTTON FABRIC SCOURED FOR S.D. PARACHUTE TYPE-I 91 CMS.() IS: 2970-1987 (REAFF. 1999) (FIRST REV.) R Established
64) DRILL COTTON WHITE BLEACHED 91 CMS.() IS: 177-1977 R Established
65) DUCK COTTON 476 GMS. SULPHAR KHAKI 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
66) DUCK COTTON 610 GMS O.G. W.P. 91 CMS.() IS: 1422-1983 (V.NO.2), REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 R Established
67) DUCK POLYESTER/COTTON BLENDED RIP STOP OGWP 91 CMS. WIDE VARIETY NO.1 WITH FIRE RETARDANT TREATMEN() AS PER REQUIREMENT & SPECIFICATION R Established
68) DUCK POLYESTER/COTTON BLENDED RIP STOP (MADE FROM-RING SPUN YARN) OG WP ROT PROOFWITH FIRE RETARDANT() IS: 13510-2000 RING SPUN YARN (V.NO.1) MASS R Established
69) FABRIC COTTON CLOSELY WOVEN 235 GR. BLACK WR 91 CMS.() JSS: 8305-5 R Established
70) FABRIC COTTON CLOSELY WOVEN 235 GRMS BLACK 91 CM WIDE, VAT DYED() JSS: 8305-5 (APRIL, 80) EXCEPT THAT SHADE WHICH WILL BE BLACK R Established
71) FABRIC COTTON CLOSELY WOVEN 237 GRMS. BLACK 91 CMS WIDE() JSS: 8305-5 EXCEPT WL. SHADE WHICH SHALL BE BLACK R Established
72) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPES WATER PROOF 76 CMS.() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST, 1995 VR.NO.1 R Established
73) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
74) FABRIC COTTON O.G.W.R. FOR CAPS WP 91 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
75) FABRIC COTTON O.G.WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE() IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Established
76) FABRIC COTTON OG WATER REPELLENT FOR CAPES WATER PROOF 76 CMS.() IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 1995 VR.NO.1 R Established
77) FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CM.() IS: 2422 VERIETY 4 R Established
78) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.() PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Established
79) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148CMS() PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Established
80) LONG CLOTH COTTON KHAKI 91 CM() IS: 187-1987 (V. NO.1) EXCEPT THAT (1) IN APPEARANCE SHADE R Established
81) LONG CLOTH COTTON WHITE BLEACHED 91 CMS() IS: 187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 R Established
82) LONG CLOTH RED 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
83) LONG CLOTH YELLOW 91 CM WIDE() IS: 187-1987 (V.NO.01) R Established
84) CLOTH COTTON SCOURED W.R. FOR CAPES. 76 CMS.() IS: 2422 & MODIFICATION AS PER ANNEX. A R Established
85) CLOTH DUCK O.G. RIP STOP 50:50 POLYSTER :COTTON BLEND IN 700 GRM./SQ.MTR.,W.P., R.P. 91 CMS WIDE() SUPPLY BY DMSRDE R Established
86) CLOTH DUCK OG RIP STOP 50:50 POLYSTER:COTTON BLEND, IN 400 GRM/SQ.MTR. W.P. R.P., 91 CMS. WIDE() SUPPLY BY DMSRDE R Established
87) CLOTH MAZARI LIGHT 142 CMS.() AS PER REQUIREMENT & SPECIFICATION R Established
88) DUCK POLYESTER/ COTTON BLENDED, RIP STOP (MADE FROM - RING SPUN YARN) OG WP ROT PROOF, VARIETY NO.1,() IS: 13510-2000 RING SPUN YARN (V. NO.1) MASS R Established
89) FABRIC COTTON 125 GSM SKY BLUE 155 CMS. WIDE() AS PER TABLE-2 OF SPECN.NO. AIR HQ/JDQAS/OK-004 R Established
90) FABRIC COTTON 50 GM OG 100 CMS. WIDE() DMSRDE/T&GS/97/415/TEX-4/3(b) R Established
Category : DP
Grade : I
Size : L
471 UNITED ENGINEERING INDUSTRIES PRIVATE LIMITED
50 B - 51/A, H-SECTOR, INDUSTRIAL AREA GOVINDPURA BHOPAL Madhya Pradesh
PIN1 : 462023
Phone No. : 2586367
GSTIN : 23AABCU3100D3Z6 		BPLU01003C

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL ENCLOSED PART NO 1156282[90]() Specification : LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL(ENCLOSED) PART NO 1156282. C Nonestab
2) LAYERS STATION ASSEMBLY PART NO 1156269[90]() Specification : LAYER STATION ASSEMBLY PART NO.1156269 C Nonestab
3) OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 194DL 0248[90]() Specification : OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248 C Nonestab
4) OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541 3020061[90]() Specification : OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061 C Nonestab
5) 9081008222 SET OF TRAIL BODY LEFT and RIGHT[90]() Specification : SET OF TRAIL BODY (LEFT & RIGHT )TO DRG.NO.1145181 & 1145186 C Nonestab
6) 9081005828 LINKAGE SYSTEM TO PART NO1148855[90]() Specification : LINKAGE SYSTEM TO PART NO.1148855. C Nonestab
7) 9081005822 HANDLE RIGHT TO PART NO 4073014[90]() Specification : HANDLE RIGHT TO PART NO.4073014. C Nonestab
8) 9081005837 HANDLE LEFT TO PART NO 4072731[90]() Specification : HANDLE LEFT TO PART NO.4072731 C Nonestab
9) PLATE AS PER DRAWING NO 5175363[90]() Specification : PLATE AS PER DRAWING NO 5175363 C Nonestab
10) PLATE AS PER DRAWING NO 5175364[90]() Specification : PLATE AS PER DRAWING NO 5175364 C Nonestab
11) PLATE AS PER DRAWING NO 5183023[90]() Specification : PLATE AS PER DRAWING NO 5183023 C Nonestab
12) PLATE AS PER DRAWING NO 4077475[90]() Specification : PLATE AS PER DRAWING NO.4077475 C Nonestab
13) PLATE AS PER DRAWING NO 5167374[90]() Specification : PLATE AS PER DRAWING NO 5167374 C Nonestab
14) PLATE AS PER DRAWING NO 5175362[90]() Specification : PLATE AS PER DRAWING NO.5175362 C Nonestab
15) MOUNTING BODY TO DRG NO 1142716[90]() Specification : MOUNTING BODY TO DRG.NO. 1142716 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) COOLING TANK TO DRG NO SB 117 50 WITHOUT PUMP[72]() Specification : As per Drawing R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MAGAZINE BOX AK 630 ASSY 01[72]() Specification : AS PER REQUIRED DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Upper Insulator to drg no 2A26 02 268[63]() Specification : Upper Insulator to drg no 2A26 02 268 C Nonestab
2) Lower Insulator to drg no 2A26 02 269[63]() Specification : Lower Insulator to drg no 2A26 02 269 C Nonestab
3) TRAY TO PART NO. 2A26-02-133() Specification : 2A26-02-133 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MAGAZINE SUB ASSY. TO DRG. NO. CTM-0112 IN F/C[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BIPOD ASSEMBLY OR GUN MOUNT COMPLETE TO DRG F1303 028700 DOC NO 304059968 IN FINISHED CONDITION DC NO 19568 W DT 30 01 17[71]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MAGAZINE SUB ASSY CTM 0175[70]() Specification : MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SEAT OPERATOR LEFT TO DRG NO IAN 67 A[90]() Specification : SEAT OPERATOR LEFT TO DRG NO IAN 67 A C Nonestab
2) SEAT OPERATOR RIGHT TO DRG NO IAN 68 A[90]() Specification : SEAT OPERATOR RIGHT TO DRG NO IAN 68 A C Nonestab
3) FIRING GEAR FOOT REST WELDING DRG NO 4027009[90]() Specification : FIRING GEAR FOOT REST WELDING DRG NO 4027009 C Nonestab
4) PEDAL LEVER TO DRG NO 5001260[90]() Specification : PEDAL LEVER TO DRG NO 5001260 C Nonestab
5) PEDAL WELDING AND MACHINING 5045062[90]() Specification : PEDAL WELDING AND MACHINING 5045062 C Nonestab
6) COVER WELDING AND MACHINING TO DRG NO 3019272[90]() Specification : COVER WELDING AND MACHINING TO DRG NO 3019272 C Nonestab
7) LEVER WELDING AND MACHINING DRG NO 6098805[90]() Specification : LEVER WELDING AND MACHINING DRG NO 6098805 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) BRACKET WELDING DRG ASSY DRG NO BOF 5078034[90]() Specification : BRACKET WELDING DRG ASSY DRG NO BOF 5078034 C Nonestab
2) BRACKET TO DRG NO BOF 6127316[90]() Specification : BRACKET TO DRG NO BOF 6127316 C Nonestab
3) MACHINING OF RACK EXTERNAL INTER[90]() Specification : MACHINING OF RACK EXTERNAL TO DRG.NO.3013787 & RACK INTERNAL TO DRG.NO.3031977. (FORGED RING WILL BE SUPPLIED BY GCF AFTER HEAT TREATMENT AT GCF) C Nonestab
4) PLATE TOP WELDING MACHINING TO DRG NO 3021409[90]() Specification : PLATE TOP WELDING & MACHINING TO DRG.NO.3021409 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) DRUM ASSY AK 630 SB 118 SB[72]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) COLLECTOR/MANIFOLD ASSY. AK-630 SB 108 SB[72]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
472 Ganga Forging Limited
Rajkot Gondal Highway, Plot No.1,Suvery No. 298/30,At :- Shapar (Veraval), Taluko :- Kotdasangani, Rajkot Gondal Higway Rajkot Gujarat
PIN1 : 360024
Phone No. : 252077
GSTIN : 24AAACG7807J1ZM 		RKTG0O173F

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR RIFLE 5.56MM INSAS.[70]() Specification : FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL.. C Nonestab
2) TRIGGER FORGING FOR RIFLE 5.56MM INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057-S(LT.DC-NIL DT.15.10.01FOR RIFLE 5.56MM INSAS(WITH FIRM'S MATL) C Nonestab
3) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
4) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Nonestab
5) SLIDE FINISH (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32[70]() Specification : SLIDE FINISH TO DRG. NO. PS32-201 (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32" PISTOL. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BODY (FORGING) FOR .315INCH. SPORTING RIFLE.[70]() Specification : BODY (FORGING) TO RFI SK. NO. 7470 (LT. DC-04/011/04 DT.24-2-04) FOR .315INCH. SPORTING RIFLE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BOLT BREECH FORGING[70]() Specification : BOLT BREECH FORGING TO DRG NO. RFI SK.3455*2FOR .315" SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR GHAATAK[70]() Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLOCK REAR BLANK FOR GHAATAK[70]() Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR GHAATAK[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V[79]() Specification : BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*7-S.(DC-01/006/18, DT-14-06-2018)FOR RIFLE 5.56MM INSAS. MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) DOUBLE BARREL FORGING[70]() Specification : DOUBLE BARREL FORGING TO DRG.NO RFI SK 2254* FOR PISTOL AUTO9MM 1A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A[70]() Specification : FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) UPPER BLOCK BARREL OF TEAR GAS GUN[70]() Specification : UPPER BLOCK BARREL OF TEAR GAS GUN C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) UPPER BLOCK BARREL OF TEAR GAS GUN[70]() Specification : UPPER BLOCK BARREL OF TEAR GAS GUN C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLOCK GAS FORGING FOR RIFLE 5 56MM INSAS[70]() Specification : BLOCK GAS FORGING AS PER RFI SK.NO.4813*8-S FOR RIFLE 5.56MM INSAS(WITH FIRM MATERIAL) C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR RIFLE 5.56MM INSAS.[70]() Specification : FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL.. C Nonestab
2) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A.[70]() Specification : FORGING OF SLIDE AS PER RFI SK.NO.3211/A FOR PISTOL AUTO 9MM 1A. C Nonestab
3) TRIGGER FORGING FOR RIFLE 5.56MM INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057-S(LT.DC-NIL DT.15.10.01FOR RIFLE 5.56MM INSAS(WITH FIRM'S MATL) C Nonestab
4) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
5) SLIDE FINISH (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32[70]() Specification : SLIDE FINISH TO DRG. NO. PS32-201 (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32" PISTOL. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BODY (FORGING) FOR .315INCH. SPORTING RIFLE.[70]() Specification : BODY (FORGING) TO RFI SK. NO. 7470 (LT. DC-04/011/04 DT.24-2-04) FOR .315INCH. SPORTING RIFLE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BODY(FORGING)TO RFI SK.NO 7470*(DC/RFI NO. 04/010/09)FOR .315 SPORTING RIFLE[70]() Specification : BODY(FORGING)TO RFI SK.NO 7470*(DC/RFI NO. 04/010/09)FOR .315" SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BOLT BREECH FORGING[70]() Specification : BOLT BREECH FORGING TO DRG NO. RFI SK.3455*2FOR .315" SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR GHAATAK[70]() Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR GHAATAK[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) DOUBLE BARREL FORGING[70]() Specification : DOUBLE BARREL FORGING TO DRG.NO RFI SK 2254* FOR PISTOL AUTO9MM 1A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) DOUBLE BARREL FORGING for 9mm Auto Pistol[7015800015]() Specification : DOUBLE BARREL FORGING for 9mm Auto Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A[70]() Specification : FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK[7020300285]() Specification : TRIGGER FORGING FOR ASSAULT RIFLE GHAATAK C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLOCK GAS FORGING FOR RIFLE 5 56MM INSAS[70]() Specification : BLOCK GAS FORGING AS PER RFI SK.NO.4813*8-S FOR RIFLE 5.56MM INSAS(WITH FIRM MATERIAL) C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR RIFLE 5 56MM INSAS THROUGH CONVERSION ROUTE[70]() Specification : FORGING OF PISTON EXTENSION AS PER RFI SK.NO.6422*2-S FOR RIFLE 5.56MM INSAS THROUGH CONVERSION ROUTE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER FORGING FOR INSAS[70]() Specification : TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS C Nonestab
Category :
Grade : Grade III
Size : S
473 SRINIVASA PAPER CONVERTERS PVT. LTD.
45-56-3/5, NARASIMHA NAGAR , SALIGRAMAPURAM VISAKHAPATNAM ANDHRAPRADESH
PIN1 : 530024
Phone No. : 0891-2558302
GSTIN : 37AAECS2807C1ZO 		VPNS02920B

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) AMMN. CONTAINER 63 A() DRG. NO. ISV 506 A C Estab.
2) AMMN. CONTAINER 39 A/L() DRG. NO. ISV 414 A C Estab.
3) AMMN. CONTAINER 40A /L() DRG. NO. ISV 415 A C Estab.
4) AMMN. CONTAINER 66A() DRG. NO. ISV 518 A C Estab.
5) COLLAR FOR PACKING OF 105 MM IFG NORMAL CHARGE() DRG. NO. ISV 1376 C Estab.
6) AMMN. CONTAINER 17 E() DRG. NO. ISV 496 A C Estab.
Category : P
Grade : I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER 12-B FOR 40MM L/70, PFFC[99]() Specification : DRG.PT.NO. ISV-393-A, DC-35470-A DT. 12/03/93 SPECN:-CQA(A)-2805(h) DC NO. 36145-A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6576763203 CONTAINER 66 A Description : 6576763203 CONTAINER 66 A() Specification : CQA(A) 2805 (H) C Estab
2) 6580853267 CONTAINER 63A ISV 506A Description : 6580853267 CONTAINER 63A ISV 506A() Specification : AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A C Estab
3) 6584113900 CONTAINER 39A Description : 6584113900 CONTAINER 39A() Specification : SPECN. NO. CQA(A) 2805 C Estab
Category : ddp
Grade : 1
Size : S
474 Alps Industries Ltd.
57/2,Site-IV(Ind.Area),Sahibabad Ghaziabad Uttar Pradesh
PIN1 : 201010
Phone No. : 01202657649
GSTIN : 09AAACA7569D1ZM 		MRTA00293G

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 CM() As per requirements & specifications R Not Estab.
Category : DP
Grade : I
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Three Layer water proof breathable fabric Dual shade OG White 118 cm width[21]() Specification : As per Appendix 'A' of Prov. Specification No. IND/TC/4587(d) and amendment No.1 As per CQA (T&C)/PMS/35 d except that fabric will be supplied roll form only as per CQA (T&C) Kanpur QAI No. CQA(T&C)/QAI/99 TC-11 R Estab
Category : DP
Grade : I
Size :
475 EASTERN INDIA CONTAINERS PVT. LTD.
A-1/A, INDUSTRIAL ESTATE VISAKHAPATNAM ANDHRAPRADESH
PIN1 : 530007
Phone No. : 0891- 2558302
GSTIN : 37AAACE7612B1Z3 		VPNE00244G

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) SLEEVE B FOR PACKING OF FZ. 162 MK-8&9() DRG. NO. PROP./SK-294 C Estab.
2) AMMN. CONTAINER 40A /L() DRG. NO. ISV 415 A C Estab.
3) AMMN. CONTAINER 63 A() DRG. NO. ISV 506 A C Estab.
4) AMMN. CONTAINER 53 A/L() DRG. NO. ISV 463 A C Estab.
5) AMMN. CONTAINER 39A/L() DRG. NO. ISV 414 A C Estab.
6) AMMN. CONTAINER 66A() DRG. NO. ISV 518 A C Estab.
7) 1410011376 COLLAR FOR 105MM IFG NC () DRG. NO. ISV 1376 C Established
8) 6584113904 CONTAINER ASSEMBLY() DRG. NO. ARDE 9759 E Established
Category : P
Grade : I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER 12-B/L FOR 40MM L/70,PFFC[99]() Specification : AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BE P Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6576763203 CONTAINER 66 A Description : 6576763203 CONTAINER 66 A() Specification : CQA(A) 2805 (H) E Estab
2) 6580853267 CONTAINER 63A ISV 506A Description : 6580853267 CONTAINER 63A ISV 506A() Specification : AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A E Estab
3) 6584113900 CONTAINER 39A Description : 6584113900 CONTAINER 39A() Specification : SPECN. NO. CQA(A) 2805 E Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) AMMUNITION CONTAINER 22 B() Specification : CQA(A) 2805 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) INSERT Description : INSERT() Specification : DRG.NO. 4-24929/3 K33/040 DC NO. 36875-A, DT 27.12.2002. PART NO. TUBE TO DRG NO. 4-24929/3RK33/017 DC NO. 36891-A DT. 05.04.2003, TUBE TO DRG NO. 4-24929/3RK33/019 DC NO. 34147-A DT. 04.06.87. C Estab
Category : p
Grade : 3
Size : S
476 MAHAVEER ENTERPRISES
PLOT N0- 4, GOYLA INDUSTRIAL DEVA ROAD CHINHAT LUCKNOW Uttar Pradesh
PIN1 : 226019
Phone No. : 8795516811
GSTIN : 09AGJPG9624M1ZT 		AGJPG9624M

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) END BKT LH BRKT FOR CROSS MEMBER[90]() Specification : END BKT LH BRKT FOR CROSS MEMBER, PT. NO.X 0476210-HASE C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Stud Front[90]() Specification : STUD FRONT 2154 7061 8801N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION C Nonestab
2) LPTA Stud Rear[90]() Specification : STUD REAR (M12X260 LENGTH) PART NO. 215470618802N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION C Nonestab
3) LPTA ASSY TAIL LAMP BRACKET[90]() Specification : ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 26145440820 C Nonestab
4) LPTA GUIDE PLATE[90]() Specification : GUIDE PLATE DRG.NO.X2604.3240.3201 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BUSH 913193180000[90]() Specification : BUSH DRG. NO. 645-1-7322-1/A C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) PIPE CLIP[90]() Specification : PIPE CLIP DRG./PART NO.X-0840110 V1 C Nonestab
2) EXHAUST PIPE CLAMP 3 INCH[90]() Specification : EXHAUST PIPE CLAMP 3" EXHAUST PIPE CLAMP 3" DRG./PART NO.X-0800310 C Nonestab
3) BRACKET FOR AXLE LAMP[90]() Specification : AS PER COMPONENT DRG. C Nonestab
4) VEHICLE IDENTIFICATION PLATE[90]() Specification : VEHICLE IDENTIFICATION PLATE C Nonestab
5) BRACKET AGB[90]() Specification : BRACKET -AGB (102-04), PART NO. X0472614-V1 C Nonestab
6) BRACKET BLACK OUT HEAD LAMP[90]() Specification : BRACKET BLACK OUT HEAD LAMP, PART NO. X-7153914-# C Nonestab
7) RADIATOR MOUNTING BKT[90]() Specification : as per component drg/part no. C Nonestab
8) SILENCER MTG BKT[90]() Specification : SILENCER MTG.BKT., PART NO. F3B00714-#.0 C Nonestab
9) BKT[90]() Specification : BKT PT NO.X7184210REF NOX7184010(B.1) C Nonestab
10) END BKT[90]() Specification : END BKT PT NO.X7184510-B.1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 C Nonestab
2) CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 C Nonestab
3) Trade assistance for laser cutting of 4 MM armour plate at firm details as per annexure A[90]() Specification : Trade assistance for laser cutting of 4MM armour plate at firm details as per annexure- ‘A’. R Nonestab
4) Trade assistance for laser cutting of 6 MM armour plate at firm details as per annexure A[90]() Specification : Trade assistance for laser cutting of 6MM armour plate at firm details as per annexure- ‘A’. R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A[91]() Specification : MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A C Nonestab
Category :
Grade : Grade III
Size : S
477 Ramkrishna Forgings Limited
L&T Chambers, 6th Floor, 16 Camac Street, Kolkata, WB
PIN1 : 700017
Phone No. : 09304546700 		CALRO2277C

Download 		1) Heavy Vehicle Factory

[Deemed Registration]
Name Specification Use Status
1) BUSH[DRG.NO.172.51.026/F]() DRG.NO.172.51.026/F C Non Established
2) BUSHING INNER[DRG.NO.172.2M.52.004/F]() DRG.NO.172.2M.52.004/F C Non Established
3) Closed Die Forgings [02 to 125 Kg][As per drawing]() As per drawing E Not Established
4) COVER[DRG.NO.172.52.127]() DRG.NO.172.52.127 C Non Established
5) Machining Assistance[As per drawing]() As per drawing E Not Established
6) Press Forgings [Up to 8 Kg][As per drawing]() As per drawing E Not Established
7) RACE BEARING[DRG.NO.175.51.007/F]() DRG.NO.175.51.007/F C Non Established
8) Ring Rolled Forgings [Up to 75 Kg][As per drawing]() As per drawing E Not Established
9) Upset Forgings [Up to 25 Kg][As per drawing]() As per drawing E Not Established
Category : P
Grade : III
Size : M
478 FLU TEF INDUSTRIES
SURVEY NO. 255/1 OPP. AARVEE DENIM.,NAROL,NAROL SARKHEJ Highway,,OPP NAROL SARKHEJ HIGHWAY AHMEDABAD Gujarat
PIN1 : 382405
Phone No. : 9712992900
GSTIN : 24AAAFF4911D1Z3 		AHMF00027G

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) 7441120237 WIRE MGTF[74]() Specification : 7441120237 WIRE MGTF 0.35 Drg No. TU16-505.185-71 WIRE MGTF 0.35 AS PER SPECN. N O. TY16-505-185-71 C Nonestab
2) 7441122979 PTFE[74]() Specification : 7441122979 PTFE, 7/0.15 WHITE PTFE, 7/0.15 WHITE, 600V, AS PE R JSS-51034 C Nonestab
3) 7441122980 PTFE[74]() Specification : 7441122980 PTFE, 7/0.15 BLACK PTFE, 7/0.15 BLACK, 600V, AS PE R JSS-51034 C Nonestab
4) 7441122981 PTFE[74]() Specification : 7441122981 PTFE, 7/0.2 RED PTFE, 7/0.2 RED, 600V, AS PER J SS-51034 C Nonestab
5) 7441122982 PTFE[74]() Specification : 7441122982 PTFE, 7/0.2 BLACK PTFE, 7/0.2 BLACK, 600V, AS PER JSS-51034 C Nonestab
Category :
Grade : Grade III
Size : S
479 BALAJI ACCU-PRECI PARTS PVT. LTD.
Balaji Bhawan, 3rd Flloor, 165-A,RAILWAY LINES SOLAPUR MAHARASHTRA
PIN1 : 413001
Phone No. : 0217-2734548
GSTIN : 27AADCB5565B1ZW 		PNEB06232C

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) PZM NOZZLE Casting & Machining Left & Right () Drg No-ERDL-1040,Det-1,Det-2 C Not Estb
Category : P
Grade : II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]() Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
2) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
3) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE Description : INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE() Specification : AS PER DRG. C Estab
2) IC FEED ARM SKM-769*2 Description : IC FEED ARM SKM-769*2() Specification : I.C FEED ARM TO DRG.NO.SKM-769*2 C Estab
3) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. Description : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.() Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) C5089 CATCH BODY FULLY FINISHED THROUGH IC DRG 64C 5089 250 H3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
2) C5014 CARRIER FULLY FINISHED THROUGH IC DRG 64C 5014 250 I3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]() Specification : As per TE C Nonestab
3) MANUFACTURING AND SUPPLY OF HOLDER IN FULLY FINISHED CONDITION TO DRG NO C2026 DS CAT NO 1005 5650452 THROUGH CASTING ROUTE WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
480 Mangalam Organics Limited
Village Kumbhivali, Savroli Kharpada Road, Tal. Khalapur,Dist:Raigad Maharashtra
PIN1 : 410202
Phone No. : 22824089
GSTIN : 27AAACDI849B1Z2 		AAACD1849B

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Camphor Description : Camphor() Specification : IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002 R Estab
Category : ddp
Grade : 3
Size : S