1) 6141855521 FIRING DEVICE FOR MINE AP 1B DIR[61]()
Specification : FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE[63]()
Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND
SPECIFICATION NO.S-I/CM/IMMK II/ATP/01.
C
Nonestab
2) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]()
Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK
1) 6141855520 TESTING DEVICE FOR MINE AP 1B DIR[61]()
Specification : TESTING DEVICE CIRCUIT CONTINUITY 1B (T2/1345-000429) TODRG. NO. CQA(I)-408 FOR MINE AP 1A/1B DIRECTIONAL & SPECN.NO. CQA (I)-265.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CASE HEMK 1 MODIFIED SER[65]()
Specification : CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.
R
Nonestab
2) WOODEN BOX FOR BPC 4W 20[65]()
Specification : WOODEN BOX FOR PROP BPC (4W-20) AS PER DRAWING ATTACHED SPECIFICATION –DRG.NO.-NAI(J) 245
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
2) UNIT LOAD 155 CHARGE M4 A2[40]()
Specification : AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
3) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
4) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
5) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]()
Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6419000074 PIEZO GENERATOR FOR FUZE B 15 EMPTY[64]()
Specification : PIEZO GENERATOR TO DRG.NO.3-024044,3B15,DC 34669-A FOR FUZEB-15 REQUIRED FOR ASSEMBLY & FILLING OF 125 MM HEAT.SUBJECTTO ACCEPTANCE IN EMPTY FILLED PROOF AS PER CQA(A)PROOF SCHEDULE NO.FZ/103(E)(PROV).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774100 PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO HE CAST 086 DET 1 TO 10 EXCLUDING 90MM SHAPED CHARGE SET OF LEGS QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)[61]()
Specification : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN.NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002.[REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY)TO IQX 86A DC NO.35879-A DT.20.12.94 (2) H
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SENSING ELEMENT (EMPTY ASSEMBLY)[61]()
Specification : SENSING ELEMENT (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-39A DC 35916 A DT.21.02.95 SPECN.CQA(A)1817(t)DC 37096-A,DT.06.03.2007 WITH (1) DUST CUP DRG PT NO.ITX-283DC 35597-A DT.06.10.93 = 01 NO.(2) FASTNER FOR SAFETY PINCORD DRG.NO.ITX 284 DC 35
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6356000009 FRP PACKAGE BOX FOR INFL MINE MK II[63]()
1) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PIEZO ELECTRIC GENERATOR ASSY LF 9911357853
Description : PIEZO ELECTRIC GENERATOR ASSY LF 9911357853()
Specification : PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX-C 27-A (SER)TIN PLATE[65]()
Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Box Cartridge LTPE Wood[65]()
Specification : BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.
R
Nonestab
2) BOX-C 27-A (SER)TIN PLATE[65]()
Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Box Cartridge LTPE Wood[65]()
Specification : BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.
R
Nonestab
2) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
Category :
Grade : Grade III
Size :
S
646
HEAVY METAL AND TUBES (INDIA) PVT. LTD.
101, Bileshwarpura, Ta:Kalol,
Dist: Gandhinagar, Gujarat – 382729, INDIA
Gujarat Gandhinagar Gujarat
PIN1 : 382729
Phone No. : 234139
GSTIN : 24AACCH0904K1ZX
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
1) Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA[70]()
Specification : Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Nonestab
3) MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
4) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
5) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
6) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
2) 20MM BOLT LEVER 44P 03002[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
3) 14 5MM BOLT LEVER 44P 14014[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) CLAMP NUT 44P 04007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
5) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
6) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
7) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
8) 20MM FIRING PIN TO DRG NO 44P03013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
9) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
3) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]()
Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIVOT PIN AS PER DRG NO K 4009 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4009 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
2) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SMOKE GENERATING SYSTEM TO 6201037001[62]()
Specification : SMOKE GENERATING SYSTEM TO DRG NO. 188.37SP-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SMOKE GENERATING SYSTEM TO 6206310002[62]()
Specification : SMOKE GENERATING SYSTEM TO DRG NO. 175.37CB-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ELECTRIC SWITCH OF SMOKE GENERATING EQUIPMENT ASSY TO 6201037003[62]()
Specification : ELECTRIC SWITCH OF SMOKE GENERATING EQUIPMENT ASSY TO DRG NO.188.37.010CBCB
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]()
Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo
S/2594/CCD Army Logo/TC-15 & Approved sample
E
Estab
2) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()
Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
E
Estab
3) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
4) FABRICATION OF SOCKS MENS WOOL DARK OG[21]()
Specification : FABRICATION OF SOCKS MEN'S WOOL DARK OG
Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANN
E
Estab
5) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
6) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012[21]()
Specification : Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012 Specification :- IND/TC/4552 (m) & Approved Sample
E
Estab
7) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
E
Estab
8) Fabrication of Bag Kit Universal Mark II[21]()
Specification : Fabrication of Bag Kit Universal (Mark-II) Specification - Provisional Specification no. S/2532/BAG KIT UNIVERSAL (OG)/TC-6(a)
E
Estab
9) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
10) FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM[J0]()
Specification : FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM
FABRICATION OF VARIOUS OPERATION (200031-KNITTING, 200033-WASHING, 200034-PRESSING, 200035-CUTTING, 200008-TAILOR SKILLED HAND-I, 200001-TAILOR SKILLED MACHINE-I,
E
Estab
11) Fabrication of Ground Sheet TPO OG[21]()
Specification : Fabrication of Ground Sheet TPO OG
Specification - JSS 8305-35:2014
R
Estab
12) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
13) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
14) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
15) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]()
Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK.
AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS
E
Estab
Category :
Grade : Grade III
Size :
S
651
SRI SANMUGA TOOLS
140 Rajeswari Lay Out Begepalli Hosur Tamil Nadu
PIN1 : 635126
Phone No. : 275123
GSTIN : 33AGCPA7041F1Z3
2) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
3) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
4) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
5) LEVER CHANGE[70]()
Specification : AS PER DRAWING
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Change Lever A7007[70]()
Specification : AS PER DRAWING
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CYLINDER TO DRG NO 44P 02001 STAR[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
2) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
3) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
5) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
6) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
7) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Nonestab
2) LEVER CHANGE[70]()
Specification : AS PER DRAWING
C
Nonestab
3) 20MM BOLT LEVER 44P 03002[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) 14 5MM BOLT LEVER 44P 14014[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
5) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
6) 20MM BOLT BODY TO DRG NO 44P 03004[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
7) Manufature and supply of CATCH COCKING HANDLE TO DS CAT NO 1005 001547 ICR 1287 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR RIFLE 7 62MM 1A1[70]()
Specification : AS PER THE SPECIFICATION GIVEN
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
2) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Estab
3) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
4) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]()
Specification : AS PER OFT REQUIREMENTS
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 20MM BOLT BODY TO DRG NO 44P 03004[70]()
Specification : AS PER OFT REQUIREMENTS
C
Estab
2) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
3) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Estab
2) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Estab
3) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]()
Specification : AS PER OFT REQUIREMENTS
C
Estab
4) 20MM BOLT BODY TO DRG NO 44P 03004[70]()
Specification : AS PER OFT REQUIREMENTS
C
Estab
5) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
6) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
C
Nonestab
7) FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE[74]()
Specification : FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
C
Nonestab
8) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
9) COVER BLIND POD FINISHED[74]()
Specification : COVER BLIND,POD,FINISHED(VIEW)Y25649A-01 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEMI- FINISHED BLANK TO DRG. NO. TEND 2529 (OFT MATERIAL) REQD.FOR MSL CYLINDER TO DRG. NO. 33P 2011.[70]()
Specification : AS PER DRAWING AND SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Estab
2) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Estab
3) MSL LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
4) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
5) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 20MM BOLT LEVER 44P 03002[70]()
Specification : AS PER OFT REQUIREMENTS
R
Estab
2) 14 5MM BOLT LEVER 44P 14014[70]()
Specification : AS PER OFT REQUIREMENTS
R
Estab
3) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
4) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
5) RETAINING BLOCK TO DRG NO 44P 06104[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
6) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
7) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
8) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) BOLT CENTERING[74]()
Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
10) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PISTON TO DRG.No. TEND-1865*2[70]()
Specification : AS PER PISTON TO DRG.No. TEND-1865*2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CHEST RIFLE to Hold 10 Rifles for 7 POINT 62mm Rifle[70]()
Specification : LF:6583305001
C
Nonestab
2) BAYONET 2A FOR 7point62mm[70]()
Specification : TE.NO. D182 G5 2344
C
Nonestab
3) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
4) RED DOT SIGHT FOR MGL[70]()
Specification : RED DOT SIGHT AS PER SPECIFICATION
C
Nonestab
5) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
C
Nonestab
6) CYLINDER TO DRG NO 44P 02001 STAR[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
7) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
8) 20MM FIRING PIN TO DRG NO 44P03013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BASE BLOCK[74]()
Specification : BASE BLOCK/065286A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
2) BOLT ASSEMBLY[74]()
Specification : BOLT ASSEMBLY, BREECH OOW50BMG AS PER DRG NO: 6528322 OF M2HB GUN
E
Nonestab
3) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
4) SHAFT SPLINE ELEVATION[74]()
Specification : SHAFT SPLINE, ELEVATION AS PER DRG 062815A-00 FOR ELEVATION ASSY OF SRCG.
C
Nonestab
5) SHAFT ELEVATION[74]()
Specification : SHAFT ELEVATION AS PER DRG 062817A-01 FOR ELEVATION ASSY OF SRCG.
R
Nonestab
6) GEAR SECTOR[74]()
Specification : GEAR SECTOR AS PER DRG No.064331A-00 FOR ELEVATION ASSY OF SRCG.
C
Nonestab
7) GEAR CROWN[74]()
Specification : GEAR CROWN (View) AS PER DRG 019789A-00 FOR TRAVERSE BEARING ASSY OF SRCG.
C
Nonestab
8) ADAPTOR MAGAZINE[74]()
Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) RELEASE CAM ASSY[74]()
Specification : RELEASE CAM ASSY (VIEW)Y25647A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
10) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR
C
Nonestab
2) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
3) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
4) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
5) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
6) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
7) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
2) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
3) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
4) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
C
Nonestab
5) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
6) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
7) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROCKER TO DRG NO C5025 IN FULLY FINISHED WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5025 200 E3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) CONNECTING LINK RIGID IN FULLY FINISHED TO DRG NO C5056 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5056 200 F3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) C1005 STRIP FULLY FINISHED THROUGH FORGING ROUTE DRG NO 64C 1005 200 F3 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
4) C2003 SHIELD FULLY FINISHED THROUGH FORGING ROUTE TEND 2096 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
5) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING OF SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2747 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM CASING C2012 RAW MATERIAL WILL BE SUPPLIED BY OFT[70]()
Specification : AS per TE
C
Nonestab
7) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
8) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION FORGING TO DRG NO 62C 6208 200 C3 FOR SLIDE FEED A6208 MATERIAL WILL BE ISSUED BY OFT[70]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT
FOR SLIDE FEED (A6208).
"
C
Nonestab
2) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
3) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
4) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR
C
Nonestab
5) MANUFACTURING OF REAR CROSS[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS OF MGL BLANKS TO DRAWING TEND NO. 2654 WITH FIRM'S MATERIAL
1) SET OF IGNITER TOP AND BOTTOM CL BAG LF 9911358667[99]()
Specification : SET OF IGNITER TOP & BOTTOM CLOTH BAG (EMPTY)- SET CONSIST OF (I) IGNITER TOP AS PER HEMRL DRG NO.1126 (ii) IGNITER BOTTOM AS PER HEMRL DRG NO.1127.
C
Nonestab
2) CLOTH BAG EMPTY AS PER HEMRL DRG No 1128 LF NUMBER 9911358666[99]()
Specification : CLOTH BAG (EMPTY) AS PER HEMRL DRG.No.1128.
C
Nonestab
3) PROPELLANT BAG EMPTY FOR 125MM FSAPDS LF NUMBER 9911358720[99]()
Specification : PROPELLANT BAG EMPTY FOR 125MM FSAPDS PRACTICE AMMUNITION AS PER DRG NO.ISX 411
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of Pack cover of ECAD Para 8.5M()
Specification : As per Specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of Shirt Angola[99]()
Specification : As per specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of Bag Kit Universal MK-2()
Specification : As per Specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of ECAD SD Parachute 8.5M CWP()
Specification : As per Specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) FABRICATION OF JACKET AND TROUSER COMBAT DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM[99]()
Specification : As per specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Opto Electronic Factory
Name
Specification
Use
Status
1) TORQUE GENERATOR STATOR 800 AS PER SPECIFICATION IUMK684 222 001 LF 7440201005[74]()
Specification : TORQUE GENERATOR STATOR, 800 AS PER SPECIFICATION IUMK684.222.001 (LF-7440201005)
C
Nonestab
2) IGNITION BLOCK AS PER DRAWING NO AL6730560 LF7441120453[74]()
Specification : IGNITION BLOCK AS PER DRAWING NO AL6.730.560
LF-7441120453
C
Nonestab
3) LF 7440201006 Torque Generator Stator 1000 For Platform with Arrester of Gryo Stabilizer To Drg IUMK 684 222 002[74]()
Specification : LF 7440201006 Torque Generator Stator 1000 For Platform with Arrester of Gryo Stabilizer To Drg. No. IUMK.684.222.002
1) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014[61]()
Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95.
C
Nonestab
2) DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD[64]()
Specification : DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD TO JSS-9310-01 :2014 , REV-3,DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN. JSS:8135-11-2014 (REVISION NO.3) DC NO.3553-ME,DT. 31.03.15 REF DRG.NO.4-027
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) FELT ON TOP[62]()
Specification : FELT (ON TOP) PRESSED WOOL FELTS(PROOFED) SIZE=280*200*5 TO 6.3(MM) SOFT QUALITY TO IS-1719:2000 REVISION-4 (REAFFIRMED-2019)
Specification : DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]()
Specification : SPECN. NO. IND/ME/883 (F) (PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255050116 TIMBER N C SIZE 110MM X 16MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 2255400600 TIMBER N C SIZE 210MM X 25MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
3) 2255408514 TIMBER N C SIZE 240MM X 22MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255050116 TIMBER N C SIZE 110MM X 16MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 2255400600 TIMBER N C SIZE 210MM X 25MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]()
Specification : SPECN. NO. IND/ME/883 (F) (PROV)
R
Nonestab
2) 2255408514 TIMBER N C SIZE 240MM X 22MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()
Specification : IND/ME/883 (F) (PROV)
R
Nonestab
3) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
4) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
5) 2255406390 TIMBER N C SIZE[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()
Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255058168 TIMBER MANGO[22]()
Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) TIMBER NON CONIFEROUS TO SPECN IND ME 883 F 2015 DC 5452 ME DATED 01 06 2016 and SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE 250 MM 26 MM 155 MTR 2255402703[22]()
Specification : TIMBER NON-CONIFEROUS TO SPECN IND / ME /883(F)-2015 DC 5452 (ME) DATED 01/06/2016 & SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE- 250 MM X 26 MM X 1.55 MTR
E
Nonestab
2) 6333501001 TIMBER PLANK SIZE 155 MM 19 MM 1 Point 25 MTRS AND TIMBER[63]()
Specification : TIMBER PLANK SIZE:- 155 MM X 19 MM X 1.25 MTRS AND TIMBER :- DEODAR/SAL/CHIR TO SPEC.IND/ME/883(F) PROV
C
Nonestab
3) 6333501002 TIMBER PLANK SIZE 180 MM 26 MM 1 Point 55 MTR AND TIMBER[63]()
Specification : TIMBER PLANK SIZE:- 180 MM X 26 MM X 1.55 MTR. AND TIMBER:DEODAR/SAL/CHIR TO SPEC IND/ME/833(F) PROV.
C
Nonestab
4) 2270528353 PLYWOOD TYPE GRADE MR AB TO SPECN IS 303 1989 RA 2018 SIZE2400MM 1200MM 08MM THICK 5 PLY[22]()
Specification : PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY)
C
Nonestab
5) 2270403355 PLYWOOD 6 MM THICK SIZE 2400 MM 1200 MM GRADE BWR APPEARANCE CLASS[22]()
Specification : PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY
C
Nonestab
6) 2270441355 PLYWOOD 3 MM THICK SIZE 2400 MM 1200 MM GRADE MR APPEARANCE[22]()
Specification : PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331401018 CATCH LOCKING TO DRG NO 1A 793 AND PART NO ISV 1A[63]()
Specification : CATCH LOCKING TO DRG NO. 1A 793 AND PART NO. ISV 1A
C
Nonestab
2) 6333501016 PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV 7[63]()
Specification : HOOK TO DRG NO 1A 793 TO PART NO ISV 7
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) HARDNER EH 411 OR 408[10]()
Specification : HARDNER EH 411 OR 408 (TO BE SUPPLIED IN 01 KG PACK).
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BARIUM NITRATE,GR.1[10]()
Specification : BARIUM NITRATE,GR.1 TO JSS:6810-59 -2010(REV.NO.3), 4087-ME DT.24.09.10 WITH AMMENDMENT LIST NO.1, (SIEVE SIZE:-MINIMUM 97+/-3 % PASSING THROUGH 125 MICRON IS SIEVE)
P
Nonestab
2) SILVER NITRATE (PURE GRADE)[10]()
Specification : SILVER NITRATE (PURE GRADE) TO SPECN. IS:2214-1977 REAF-2019
P
Nonestab
3) BARIUM PEROXIDE GR.I[10]()
Specification : BARIUM PEROXIDE GR.I TO JSS-6810-96 -2016-REV-3 DC NO 6063- ME, DT.08.06.2017.
P
Nonestab
4) SODIUM AZIDE[10]()
Specification : SODIUM AZIDE TO JSS-6810-79:2021, REV-3
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) ANTIMONY SULPHIDE [BLACK] IN LUMPS[10]()
Specification : ANTIMONY SULPHIDE [BLACK] IN LUMPS TO SPECN. JSS-6810-71:2019 REV.NO-5 DC-6159-ME DT.10.07.21 DS CAT NO.6810-000-920.
P
Nonestab
2) LEAD NITRATE SQ/AR GRADE[10]()
Specification : LEAD NITRATE SQ/AR/GR/LR/ACS/EXTRA PURE GRADE, MAKE: LOBA/MERCK/GLAXO/RANKEM/FINAR/BDH/CDH/QUALIGENS (REFER SPECN. JSS-6810-80/2021, REV-4)
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) ETHYLENE GLYCOL (GENERAL GRADE) TO SPECN. IS[10]()
Specification : ETHYLENE GLYCOL (GENERAL GRADE) TO SPECN. IS: 5295-1985 (FIRST REVISION) REAFFIRMED-2018.
Specification : PIECE PACKING FELT MEDIUM HARD PROOFED TO SIZE:9274.0-1.5X141.0-1.5X6.0)MM TO SPECIFICATION IS:1719 TO DRG NO.CI(A)/AMN/1676 PART NO.ISV 371GA ITEM NO.04
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BOX UNIT LOAD FOR 155 MM SHELL M107 1465000220[14]()
Specification : DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
R
Nonestab
Category : p
Grade : 3
Size :
S
654
DAYA INDUSTRIES
133/147 O BLOCK KIDWAI NAGAR KANPUR Uttar Pradesh
PIN1 : 208011
Phone No. : 2641677
GSTIN : 09AALFD1494Q1ZN
1) HEAD BREECH BOLT FOR 0.315 SPORTING RIFLE (SP-18)[70]()
Specification : HEAD BREECH BOLT (SP-18) UPTO OPERATION STAGE-XIV AS PERRFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V) OF RIFLE 5.56MM.INSAS.[70]()
Specification : BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER FOR 30-06 SPORTING RIFLE[70]()
Specification : STEEL BS: 970, 070 M55 (EN 9)
C
Nonestab
2) HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PERRFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
3) CATCH SAFETY TO DRG. NO.SP-46 (LATEST DC-RFI NO.04/030/02DATED 30/7/02) FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
4) SEAR TO DRG. NO. SP-60 (LT. DC-04/005/02 DT.25-03-2002)FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEAR FOR 9MM AUTO PISTOL 1A.[70]()
Specification : IS:3748 : 1990 DESIGNATION 75 T-6
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PERRFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315SPORTING RIFLE.[70]()
Specification : HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PERRFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V[79]()
Specification : BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*7-S.(DC-01/006/18, DT-14-06-2018)FOR RIFLE 5.56MM INSAS. MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Jacket Wind Cheater[21]()
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]()
Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo
S/2594/CCD Army Logo/TC-15 & Approved sample
E
Estab
2) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()
Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
E
Estab
3) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
4) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
5) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
6) Fabrication of Ground Sheet TPO OG[21]()
Specification : Fabrication of Ground Sheet TPO OG
Specification - JSS 8305-35:2014
R
Estab
7) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
8) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
9) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
10) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]()
Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK.
AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS
E
Estab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012[21]()
Specification : IND/TC/4552 (M) & Approved Sample
E
Estab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) FABRICATION OF PONCHO GLACIER[9911037521]()
Specification : As per Drawing/ Technical particulars enclosed
R
Nonestab
2) Fabrication of SD Para Pack Cover[2110025032]()
Specification : Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3
R
Nonestab
3) Fabrication of Carrying Bag HAP[2110025034]()
Specification : As per Drawing/Tech Particulars attached
R
Nonestab
4) Fabrication of Carrying Bag PTAM[2110025037]()
Specification : As per Drawing/Tech Particulars attached
R
Nonestab
5) Fabrication of Pack Cover HAP[2110025035]()
Specification : Drawing No. - ADRDE/1283-A-3(c)
R
Nonestab
6) Fabrication of Pack Cover PTAM[2110025038]()
Specification : Drawing No. –ADRDE/1142(g)
R
Nonestab
7) Fabrication of Bag Parachutist[2110025039]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.CIT&C/TC-8/39
R
Nonestab
8) Fabrication of BAG INNER PTAM[2110025036]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1143(e)
R
Nonestab
9) Fabrication of BAG INNER HAP[2110025033]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1283-A-4(b)
R
Nonestab
10) FABRICATION OF CARRYING BAG BP SU 30[2110025041]()
Specification : AS PER DRG. NO. ADRDE/1402-09(c)
R
Nonestab
11) FABRICATION OF DEP BAG BRAKE PARA LCA[2110025046]()
Specification : AS PER DRG. NO. 1.3.01-06 (b)
R
Nonestab
12) FABRICATION OF DEP BAG BRAKE PARA MIG 29[2110025043]()
Specification : AS PER DRG. NO. ADRDE/1235-A-2 (b)
R
Nonestab
13) FABRICATION OF CARRYING BAG BP LCA[2110025047]()
Specification : As per Drg. No. 1.3.01-09 (a)
R
Nonestab
14) FABRICATION OF PARA 81 MM[2110025058]()
Specification : Drg. No. ADRDE/1112
R
Nonestab
15) Fabrication of Para Drogue Para 155 mm[2110025070]()
Specification : Latest drawing of Para 155 mm Naschern & drogue Para with gore 155mm received vide' Ordnance Factory Dehu Road A unit of Munitions India Ltd. PUNE letter No 3241/OFDR/MCO/155 mm dtd 18.10.2021
Drogue Parachute:- Assy. Drg. 2440A20014,
R
Nonestab
16) Fabrication of main Para 155 mm[2110025069]()
Specification : Latest drawing of Para 155 mm Naschern & drogue Para with gore 155mm received vide Ordnance Factory Dehu Road A unit of Munitions India Ltd. PUNE letter No 3241/OFDR/MCO/155 mm dtd 18.10.2021 Parachute:- Assy. Drg. 2440 A 13032
Designer
R
Nonestab
Category :
Grade : Grade III
Size :
SS
658
ASIAAN METALS AND ALUMINIUM CASTING PRIVATE LIMITED
No.348, Madhavaram Red Hills High Road, Madhavaram Red Hills High Road, Madhavaram Chennai - 600060. Tamil Nadu
PIN1 : 600006
Phone No. : 50979898
GSTIN : 29AALCA4086E1ZH
