List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
621 New India Rubber Manufacturing Co
S-38, S.S.G.T. Road Industrial Area, Ghaziabad. S.S.G.T. ROAD Ghaziabad Uttar Pradesh
PIN1 : 201009
Phone No. : 4377750
GSTIN : 09AESPK7057H1ZW 		MRTG00122D

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RUBBERISING OF METALLIC PIN TRACK T 90 L F NO 2015489041[20]() Specification : RUBBERISING OF METALLIC PIN DRG. NO. 219-35-173 {CQA(HV)}ALONG WITH "CONTACT NEEDLE" DRAWING NUMBER 219-35-28 {CQA(HV)} & "PIN ASSY" TO DRAWING NUMBER 219.35CB-188CB AND 219.35CB-167CB. {CQA(HV)} TECHNICAL REQUIREMENTS AS PER 520 TY 1, T C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RUBBERISING OE LONG BUSHING L FNO 6230901114[62]() Specification : RUBBERISING OF LONG BUSHING TO DRg.No.613.44.059,AS PER SPEC.No.OFM/TDS/TRACK-72/04 AND COMPLETE ASSEMBLY DRg.No.613.44.055 Cb. C Nonestab
2) RUBBERISING OF MEDIUM BUSHING L F NO 6230901115[62]() Specification : RUBBERISING OF MEDIUM BUSHING TO DRg.No.613.44.060,AS PER SPEC.No.OFM/TDS/TRACK-72/04 AND COMPLETE ASSMBLY- DRg.No.613.44.056 Cb. C Nonestab
3) RUBBERISING OF SHORT BUSHING L F NO 6230901116[62]() Specification : RUBBERISING OF SHORT BUSHING TO DRg.No.613.44.061, AS PER SPEC.No.OFM/TDS/TRACK-72/04 AND COMPLETE ASSEMBLY DRg.No.613.44.057 Cb. C Nonestab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Ring TRL() 303-11-2 E Not Estab
Category : P
Grade : II
Size : S
622 Bhandari industrial Corporation
32/34 Damodar Niwas CP Tank Road Mumbai Maharashtra
PIN1 : 400004
Phone No. : 23858212 		ACOPB3307R

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020 Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020() Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652 R Nonestab
Category : s
Grade : 3
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Ferrous Metals & Alloys() As per drawing / specifications R Estab.
2) Non-Ferrous Metals & Alloys() As per drawing / specifications R Estab.
Category : DP
Grade : II
Size : M
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985 Description : 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985() Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985 R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF FORGING OF LOWER RING TO DRG NO AK 630 119 1 AND FORGING OF UPPER RING TO DRG NO AK 630 119 2 AND FORGING OF INTERNAL RING TO DRG NO AK 630 119 25 MAT SPECN GRADE X 2 OCR 13 TO IS 6911 92 Description : SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF FORGING OF LOWER RING TO DRG NO AK 630 119 1 AND FORGING OF UPPER RING TO DRG NO AK 630 119 2 AND FORGING OF INTERNAL RING TO DRG NO AK 630 119 25 MAT SPECN GRADE X 2 OCR 13 TO IS 6911 92() Specification : SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF:- (A) FORGING OF LOWER RING TO DRG NO AK-630 119-1. (B) FORGING OF UPPER RING TO DRG NO AK-630 119-2. (C) FORGING OF INTERNAL RING TO DRG NO AK-630 119-25. MAT. SPECIFICATION:G C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN Description : 0700100007 COPPER ROD 6 POINT 5 MM DIA 0 POINT 09 MM IN() Specification : BS:2874-1986 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Steel Strip 15 x 0point2 mm BS1449 IS513DD LF 0121060022 Description : Steel Strip 15 x 0point2 mm BS1449 IS513DD LF 0121060022() Specification : Steel Strip 15+/- 0.50 mm wide X 0.20-0.02 mm thick to specn: IS513-2008 GR.CR3 or BS-1449- section 1.1.1991 GR.1 CSIN Coil of ID 60MM LF 0121060022 R Estab
Category : s
Grade : 3
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) PLATE MILD STEEL TO 0101020160 Description : PLATE MILD STEEL TO 0101020160() Specification : IS:2062(16MM)THK R Estab
2) PLATE MILD STEEL 32MM THK TO 0112020320 Description : PLATE MILD STEEL 32MM THK TO 0112020320() Specification : IS:2062(32) R Estab
3) PLATE MILD STEEL TO 0112020254 Description : PLATE MILD STEEL TO 0112020254() Specification : IS:2062(25) R Estab
4) BRASS ROUND ROD TO 0717640060 Description : BRASS ROUND ROD TO 0717640060() Specification : GOST:15527-70(60MM) R Estab
5) ROUND GR 20X13 32MM DIA STEEL TO 0325200032 Description : ROUND GR 20X13 32MM DIA STEEL TO 0325200032() Specification : GOST:5632-72(32MM) R Estab
6) ROUND GR 20X2H4A TO 0412500038 Description : ROUND GR 20X2H4A TO 0412500038() Specification : GOST:4543-71(38MM) R Estab
7) STEEL PLATE TO 0133020005 Description : STEEL PLATE TO 0133020005() Specification : 5X1250X2500 R Estab
8) SHEET STEEL 3 15MM THK TO 0112020032 Description : SHEET STEEL 3 15MM THK TO 0112020032() Specification : IS:2062(3.15) R Estab
9) STEEL PLATE GRADE 45 C8 TO 0142122056 Description : STEEL PLATE GRADE 45 C8 TO 0142122056() Specification : IS:5517-1993(56MM-THK) R Estab
10) ANGLE EQUAL MILD ST 40x40x5MM TO 0101070068 Description : ANGLE EQUAL MILD ST 40x40x5MM TO 0101070068() Specification : IS:2062(40X40X5) R Estab
11) ANGLE EQUAL M S TO 0101070087 Description : ANGLE EQUAL M S TO 0101070087() Specification : IS:808-99(50X50X6) R Estab
12) ANGLE MILD ST EQUAL 65X65X6 MM TO 0101070139 Description : ANGLE MILD ST EQUAL 65X65X6 MM TO 0101070139() Specification : IS-2062(65x65x6) R Estab
13) ANGLE EQUAL MILD ST 75x75x6MM ANNEALED TO 0133070151 Description : ANGLE EQUAL MILD ST 75x75x6MM ANNEALED TO 0133070151() Specification : IS:2062(75X75X6) R Estab
14) 20X2H4A W ESR GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412602090 Description : 20X2H4A W ESR GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412602090() Specification : 20X2H4A-W(ESR)(DIA90 R Estab
15) 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500034 Description : 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500034() Specification : 20X2H4A(DIA.34) R Estab
16) STAINLESS STEEL AISI 321 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0323306125 Description : STAINLESS STEEL AISI 321 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0323306125() Specification : ST.STEEL(DIA.125) R Estab
17) ROUND ALUMINIUM ALLOY TO 0610200048 Description : ROUND ALUMINIUM ALLOY TO 0610200048() Specification : GOST:4784-74(48) R Estab
18) PLATE TO 0610220642 Description : PLATE TO 0610220642() Specification : AMG6(26MM-THK) R Estab
19) ALUMINIUM ALLOY GRADE 19600 CONDITION TO 0619220799 Description : ALUMINIUM ALLOY GRADE 19600 CONDITION TO 0619220799() Specification : IS:736-86(25) R Estab
20) 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500050 Description : 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500050() Specification : 20X2H4A(DIA.50) R Estab
21) PIPE GR ST 10 57MM OD X 3MM THK TO 0111555563 Description : PIPE GR ST 10 57MM OD X 3MM THK TO 0111555563() Specification : GOST:1050-74(57X3) R Estab
22) PIPE ST GR B10 60X2 5 TO 0111555571 Description : PIPE ST GR B10 60X2 5 TO 0111555571() Specification : GOST:8734-75(60X2.5) R Estab
23) SHEET 5 III 10KP HARTEN TO 0103020020 Description : SHEET 5 III 10KP HARTEN TO 0103020020() Specification : GOST:16523-70(2.0) R Estab
24) 60C2XA GOST 14959 79 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0353100022 Description : 60C2XA GOST 14959 79 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0353100022() Specification : 60C2XA(DIA.22) R Estab
25) STEEL ROUND TO 0103000060 Description : STEEL ROUND TO 0103000060() Specification : IS:7283-1992(60MM) R Estab
26) SHEET 1 0X600X1200MM LG GR DM 0 8 L 63 TO 0710922297 Description : SHEET 1 0X600X1200MM LG GR DM 0 8 L 63 TO 0710922297() Specification : GOST:931-90(1MM) R Estab
27) SHEET GR ST 15 4 II 2 0MMX1250MMX2500LG TO 0122022455 Description : SHEET GR ST 15 4 II 2 0MMX1250MMX2500LG TO 0122022455() Specification : GOST:19903-74(2MM) R Estab
28) WIRE STAINLESS SOFT 1 2 MM TO 0326011012 Description : WIRE STAINLESS SOFT 1 2 MM TO 0326011012() Specification : AISI:304(1.2)SOFT R Estab
29) OPEN HEARTH STEEL 15 GOST 1050 60 FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000090 Description : OPEN HEARTH STEEL 15 GOST 1050 60 FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000090() Specification : GOST:1050-60(DIA.90) R Estab
30) 45XH GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0352950060 Description : 45XH GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0352950060() Specification : 45XH(SQUARE60) R Estab
31) SHEET GR ST 15 4 III 3 0X1250X2500MM LG TO 0122022465 Description : SHEET GR ST 15 4 III 3 0X1250X2500MM LG TO 0122022465() Specification : GOST:19903-74(3MM) R Estab
32) OPEN HEARTH STEEL 15 TO 0122022698 Description : OPEN HEARTH STEEL 15 TO 0122022698() Specification : GOST:1577-70(25MM) R Estab
33) STEEL15 GOST 1050 74 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000080 Description : STEEL15 GOST 1050 74 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0122000080() Specification : STEEL-15(DIA.80) R Estab
34) PLATE MILD ST 40MMTHKX1250MMX2500MM TO 0112020381 Description : PLATE MILD ST 40MMTHKX1250MMX2500MM TO 0112020381() Specification : IS:2062(40) R Estab
35) PLATE MILD ST 50MMTHKX1250X2500MM TO 0112020508 Description : PLATE MILD ST 50MMTHKX1250X2500MM TO 0112020508() Specification : IS:2062(50) R Estab
36) PLATE MILD ST 56MMTHKX1250MMX2500MM TO 0112020560 Description : PLATE MILD ST 56MMTHKX1250MMX2500MM TO 0112020560() Specification : IS:2062(56) R Estab
37) PLATE MILD ST 75MMTHKX1250MMX2500MM TO 0112020750 Description : PLATE MILD ST 75MMTHKX1250MMX2500MM TO 0112020750() Specification : IS:2062(75) R Estab
38) ROUND GR 45XH2M FA SH 100MM TO 0412702100 Description : ROUND GR 45XH2M FA SH 100MM TO 0412702100() Specification : GOST:4543-71(100) R Estab
39) PLATE MILD ST 80MMx1250X5000MM LG TO 0103020794 Description : PLATE MILD ST 80MMx1250X5000MM LG TO 0103020794() Specification : IS:2062(80) R Estab
40) PIPE 14X1 5 ST GR B10 TO 0111756155 Description : PIPE 14X1 5 ST GR B10 TO 0111756155() Specification : GOST:8734-75(14X1.5) R Estab
41) SHEET 5 III G10KP GOST 16523 70 TO 0111822444 Description : SHEET 5 III G10KP GOST 16523 70 TO 0111822444() Specification : B1.5GOST:19904-74 R Estab
42) ANGLE EQUAL MILD ST 100x100x10MM THK TO 0101070200 Description : ANGLE EQUAL MILD ST 100x100x10MM THK TO 0101070200() Specification : IS:2062(100X100X10) R Estab
43) ANGLE MILD STEEL 75x75x8 MM TO 0133070149 Description : ANGLE MILD STEEL 75x75x8 MM TO 0133070149() Specification : IS:2062(75X75X8) R Estab
44) SHEET 85 GOST 14959 69 TO 0156122486 Description : SHEET 85 GOST 14959 69 TO 0156122486() Specification : TY:14.1.1133.74(4) R Estab
45) PLATE 20MMX1250X2500MM TO 0133020020 Description : PLATE 20MMX1250X2500MM TO 0133020020() Specification : IS:2062(20)THK R Estab
46) ANGLE TO 0326170084 Description : ANGLE TO 0326170084() Specification : GOST:19281(45X28X4) R Estab
47) TUBE STEEL 10MM OD X 2 5MM THK X 2000MM LG TO 0131055674 Description : TUBE STEEL 10MM OD X 2 5MM THK X 2000MM LG TO 0131055674() Specification : GOST:8734-75(10X2.5) R Estab
48) PIPE B20 GOST 8733 74 TO 0131055170 Description : PIPE B20 GOST 8733 74 TO 0131055170() Specification : GOST:8734-75(16X3) R Estab
49) SHEET 8GOST 19903 74 0 TB1 M1 TO GOST TO 0141022613 Description : SHEET 8GOST 19903 74 0 TB1 M1 TO GOST TO 0141022613() Specification : GOST:19903-74(8) R Estab
50) ROUND STEEL EN24 85MM DIA TO 0334002085 Description : ROUND STEEL EN24 85MM DIA TO 0334002085() Specification : BS:970(85)EN24 R Estab
51) PIPE GR 12X18H10T TO 0323155187 Description : PIPE GR 12X18H10T TO 0323155187() Specification : GOST:9941(18X2) R Estab
52) PIPE TO 0610155171 Description : PIPE TO 0610155171() Specification : OST:192096-83(16X3.5) R Estab
53) PIPE TO 0131055288 Description : PIPE TO 0131055288() Specification : GOST:8734-75(25X2) R Estab
54) PLATE MILD ST 125 THKx1250 WDTHx2500MMLG TO 0101020925 Description : PLATE MILD ST 125 THKx1250 WDTHx2500MMLG TO 0101020925() Specification : IS:2062(125MM)THK R Estab
55) PLATE MILD ST 160 THKx1250 WDTHx2500MM LG TO 0101020944 Description : PLATE MILD ST 160 THKx1250 WDTHx2500MM LG TO 0101020944() Specification : IS:2062(160MM) R Estab
56) PLATE MILD ST 120 THKx1250 WDTHx2500MMLG TO 0133020922 Description : PLATE MILD ST 120 THKx1250 WDTHx2500MMLG TO 0133020922() Specification : IS:2062(120) R Estab
57) PLATE 10MMTHKX1250 WDTHX2500MM LG TO 0101020100 Description : PLATE 10MMTHKX1250 WDTHX2500MM LG TO 0101020100() Specification : IS:2062(10)THK R Estab
58) ROUND EN 24 70MM DIA STEEL TO 0334002070 Description : ROUND EN 24 70MM DIA STEEL TO 0334002070() Specification : BS:970(70)EN24 R Estab
59) PLATE GRST 15 3 T 16MMX1250X1800 2500 TO 0122022653 Description : PLATE GRST 15 3 T 16MMX1250X1800 2500 TO 0122022653() Specification : GOST:19903-74(16MM) R Estab
60) WIRE MESH NETTING SS 4 5MM SQ X0 9MM DIA TO 1761259910 Description : WIRE MESH NETTING SS 4 5MM SQ X0 9MM DIA TO 1761259910() Specification : GOST:3826(4.5X0.9) R Estab
61) SHEET BRASS CZ 108 O CONDITION 10SWG TO 0710820032 Description : SHEET BRASS CZ 108 O CONDITION 10SWG TO 0710820032() Specification : BS:2870-80(10G) R Estab
62) PLATE GR ST 40 3 T TO 0141022624 Description : PLATE GR ST 40 3 T TO 0141022624() Specification : GOST:19903-74(10) R Estab
63) ROUND M C QUALITY GR 15 25MM DIA TO 0122000025 Description : ROUND M C QUALITY GR 15 25MM DIA TO 0122000025() Specification : GOST:1050(25MM) R Estab
64) ROLLED STEEL ANGLES TO 0326270089 Description : ROLLED STEEL ANGLES TO 0326270089() Specification : GOST:8509-93(45X45X5) R Estab
65) PLATE 16 MM THICK STEEL TO 0132020159 Description : PLATE 16 MM THICK STEEL TO 0132020159() Specification : IS:2062(16) R Estab
66) SHEET ST GR 15 4 II 2 0X700X1400MM LONG TO 0122022449 Description : SHEET ST GR 15 4 II 2 0X700X1400MM LONG TO 0122022449() Specification : GOST:19903-74(2.0) R Estab
67) ROUND GR ST 40 38 MM DIA 38 MM DIA STEEL TO 0141000038 Description : ROUND GR ST 40 38 MM DIA 38 MM DIA STEEL TO 0141000038() Specification : GOST:1050(38) R Estab
68) PLATE MILD ST 8 THKX1250 WIDTH X 2500MM LG TO 0101020080 Description : PLATE MILD ST 8 THKX1250 WIDTH X 2500MM LG TO 0101020080() Specification : IS:2062(8MM)THK R Estab
69) SHEET MILD ST SWG 4MM THICK TO 0132020040 Description : SHEET MILD ST SWG 4MM THICK TO 0132020040() Specification : IS:2062(4MM) R Estab
70) S M SHEET 3 15MM THICK TO 0101022315 Description : S M SHEET 3 15MM THICK TO 0101022315() Specification : HVF/LF:0101022315 R Estab
71) CHANNEL MILD ST 75x40MM TO 0101070320 Description : CHANNEL MILD ST 75x40MM TO 0101070320() Specification : IS:2062(75X40) R Estab
72) PLATE MILD STEEL 6MM THK TO 0112020064 Description : PLATE MILD STEEL 6MM THK TO 0112020064() Specification : IS:2062(6) R Estab
73) TUBE TO 0111555348 Description : TUBE TO 0111555348() Specification : GOST:8734-75(32X2.5) R Estab
74) PIPE ST B10 TO 0111555409 Description : PIPE ST B10 TO 0111555409() Specification : GOST:8734-75(38X2.5) R Estab
75) TUBE TO 0111555502 Description : TUBE TO 0111555502() Specification : GOST:8734-75(48X1.5) R Estab
76) ANGLE GR 09G2 2 32x32x4MM STEEL HOT ROLLED ANNEALED TO 0326170033 Description : ANGLE GR 09G2 2 32x32x4MM STEEL HOT ROLLED ANNEALED TO 0326170033() Specification : GOST:19282(32X32X4) R Estab
77) FLAT MILD STEEL 75x20MM TO 0133033342 Description : FLAT MILD STEEL 75x20MM TO 0133033342() Specification : IS:2062(75X20MM) R Estab
78) FLAT MILD STEEL 75x25 MM TO 0133230416 Description : FLAT MILD STEEL 75x25 MM TO 0133230416() Specification : IS:2062(75X25) R Estab
79) SHEET STEEL GR 15 4 II 2 5X1250X2500MM LG TO 0122022458 Description : SHEET STEEL GR 15 4 II 2 5X1250X2500MM LG TO 0122022458() Specification : GOST:16523-70(2.5) R Estab
80) ROUND MILD ST 180 MM DIA TO 0101000180 Description : ROUND MILD ST 180 MM DIA TO 0101000180() Specification : IS:2062(180MM) R Estab
81) ANGLE EQUAL M S 40x40x6MMX6MTRS LG TO 0101070069 Description : ANGLE EQUAL M S 40x40x6MMX6MTRS LG TO 0101070069() Specification : IS:2062(40X40X6) R Estab
82) PIPE U O 175 02 258 TO 0131055905 Description : PIPE U O 175 02 258 TO 0131055905() Specification : GOST:8734-75/34X2 R Estab
83) ROUND ST HSS 100 MM DIA TO 0256500100 Description : ROUND ST HSS 100 MM DIA TO 0256500100() Specification : ASP-30(100) R Estab
84) PLATE ST 7 0x1000x2000MM GR 20 5 IIIG HOT ROLLED ANNEALED CONDITION TO 0131022602 Description : PLATE ST 7 0x1000x2000MM GR 20 5 IIIG HOT ROLLED ANNEALED CONDITION TO 0131022602() Specification : GOST:16523-70(7MM) R Estab
85) SHEET CR ST 3X1250X2500MM GR 10KP 4 II TO 0111822470 Description : SHEET CR ST 3X1250X2500MM GR 10KP 4 II TO 0111822470() Specification : GOST:1050-74(3.0) R Estab
86) PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257 Description : PIPE GR ST B20 22MM OD X 2MM THK TO 0111555257() Specification : GOST:8733(22X2) R Estab
87) AL BRONZE 38MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600038 Description : AL BRONZE 38MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600038() Specification : GOST:18175-78(38MM) R Estab
88) ANGLE GR 09G2 2 40x40x4MM STEEL HOT ROLLED ANNEALED TO 0326170067 Description : ANGLE GR 09G2 2 40x40x4MM STEEL HOT ROLLED ANNEALED TO 0326170067() Specification : GOST:19282(40X40X4) R Estab
89) STEEL ROUND BAR GRADE 40 TO 0141000030 Description : STEEL ROUND BAR GRADE 40 TO 0141000030() Specification : GOST:1050(30)RDGR40 R Estab
90) TUBE GR AMTS M GOST 4784 74 TO 0615255699 Description : TUBE GR AMTS M GOST 4784 74 TO 0615255699() Specification : GOST:4784-74 R Estab
91) SHEET GR 15 3 T 6 0X1400X2500MM LG TO 0122022595 Description : SHEET GR 15 3 T 6 0X1400X2500MM LG TO 0122022595() Specification : GOST:19903-74(6MM) R Estab
92) SHEET 4MM GOST 19903 74 TO 0326322485 Description : SHEET 4MM GOST 19903 74 TO 0326322485() Specification : GOST:19282-73(4MM) R Estab
93) SHEET CHEQUERED RHOMBIC 5MM THICK TO 0329420487 Description : SHEET CHEQUERED RHOMBIC 5MM THICK TO 0329420487() Specification : GOST:8568(5MM) R Estab
94) ROUND GR 20X 36MM DIA STEEL TO 0352500036 Description : ROUND GR 20X 36MM DIA STEEL TO 0352500036() Specification : GOST:4543(36) R Estab
95) PLATE STEEL GR 09G2 6 TO 0326422616 Description : PLATE STEEL GR 09G2 6 TO 0326422616() Specification : GOST:19282(09G2-6) R Estab
96) PLATE MILD STEEL 5MM THKTO 0112020048 Description : PLATE MILD STEEL 5MM THKTO 0112020048() Specification : IS:2062(5) R Estab
97) ROUND STEEL GRADE ST20 14MM DIA HOT ROLLED ANNEALED CONDITION TO 0131000014 Description : ROUND STEEL GRADE ST20 14MM DIA HOT ROLLED ANNEALED CONDITION TO 0131000014() Specification : GOST:1050-74(14MM) R Estab
98) STEEL SHEET 10KP TO 0111822483 Description : STEEL SHEET 10KP TO 0111822483() Specification : GOST:1577-70 R Estab
99) ANGLE STEEL HR A 50X50X6MM GR 09G2 12 TO 0326170087 Description : ANGLE STEEL HR A 50X50X6MM GR 09G2 12 TO 0326170087() Specification : GOST:19281(50X50X6) R Estab
100) PIPE STEEL 30MM OD X 1MM THK X 2000MM LG TO 0132556326 Description : PIPE STEEL 30MM OD X 1MM THK X 2000MM LG TO 0132556326() Specification : GOST:8734-75(30X1) R Estab
101) TUBE STEEL 24 ODX3 5 THK X 1250 2500MM LG TO 0131055272 Description : TUBE STEEL 24 ODX3 5 THK X 1250 2500MM LG TO 0131055272() Specification : GOST:8734-75(24X3.5) R Estab
102) TUBE B20 GOST 8733 74 LENGTH 5 7 METERS TO 0131055260 Description : TUBE B20 GOST 8733 74 LENGTH 5 7 METERS TO 0131055260() Specification : GOST:8734-75(22X3) R Estab
103) PIPE TO 0218555674 Description : PIPE TO 0218555674() Specification : GOST:8732-78(121X22) R Estab
104) STEEL TO IS 2062 FE410WA TO 0133020120 Description : STEEL TO IS 2062 FE410WA TO 0133020120() Specification : IS:2062-92(12) R Estab
105) TUBE ST GR B10 34x4 5MM THK TO 0111756359 Description : TUBE ST GR B10 34x4 5MM THK TO 0111756359() Specification : GOST:8734-75(34X4.5) R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA Description : STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA() Specification : STEEL ROUND TO SPECN. IS:7283-1992 WITH PROPERTIES AS PER SPECN IS 2062-2006 DESIGNATION (FE 410 W) QUALITY-A HAVING STRAIGHT LENGTH OF 2 TO 3 METERS. SIZE: - 115.00 +2.00 MM DIA R Estab
Category : ddp
Grade : 1
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 15 MM DIA SPCN IS 5517 93 50C8 Description : STEEL ROD 15 MM DIA SPCN IS 5517 93 50C8() Specification : STEEL ROD 15 MM DIA SPCN - IS : 5517-93-50C8 R Estab
Category : ddp
Grade : 3
Size : M
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRS ROND 20 MM DIA HALF HARD() Specification : BRASS ROUND 3/4" OR 20 MM DIA HALF HARD TYPE I LENGTH 1 TO 2 METRES SPECN: IS: 319:1989 (FOURTH REV.) R Estab
2) T AND D ST RND 133 T 3 ANN AND STRA 40MM D() Specification : TOOL & DIE STEEL ROUND, DESIGN 133 T 3 , HOT ROLLED, ANNEALED & M/C STRAIGHTENED, 40 MM DIA, TO SPECN IS: 3748-1990. MIN LENGTH 2 TO 3 MTR. R Estab
3) T and D RND 133 T 3 45 MM 2 TO 3 MTR() Specification : TOOL & DIE STEEL ROUND DESIGNATION 133 T 3 , HOT ROLLED, ANNELED & M/C STRAIGHTENED, 45 MM DIA, 2 TO 3 METRE LONG, TO SPECN IS: 3748-1990 SECOND REVISION R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18 POINT 5 1 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 POINT 5 MTRS Description : STEEL ROUND TO SPECN BS 970 PT I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18 POINT 5 1 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 POINT 5 MTRS() Specification : STEEL ROUND TO SPECN. BS-970, PT.I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18.5 +1.00 MM DIA. IN STRAIGHT LENGTH OF 2 TO 3.5 MTRS. R Estab
2) AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 20 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS Description : AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 20 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS() Specification : AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 20 + 0.08/-0.13MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS R Estab
3) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS SIZE 10 MM DIA WITHOUT PGG Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS SIZE 10 MM DIA WITHOUT PGG() Specification : ALUMINIUM ALLOY ROUNDS TO SPECN. IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS , SIZE : 10+/-0.1 MM DIA WITHOUT PGG. R Estab
4) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 12 MM DIA WITHOUT PGG Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 12 MM DIA WITHOUT PGG() Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG. R Estab
5) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 14POINT 5 MM DIA WITHOUT PGG Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES SIZE 14POINT 5 MM DIA WITHOUT PGG() Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG. R Estab
6) BRASS ROD BS2874 1969 CZ124 COND 1 by 2 H OR BS 2872 1969 CZ123 SIZE DIA 18 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH Description : BRASS ROD BS2874 1969 CZ124 COND 1 by 2 H OR BS 2872 1969 CZ123 SIZE DIA 18 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH() Specification : BRASS ROD BS2874:1969 CZ124 COND 1/2 H OR BS 2872:1969 CZ123 SIZE : DIA 18 -0.07 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH. R Estab
7) ALUMINIUM ALLOY ROD TO SPECN IS 733 1983 REAFFERMED 2006 GR 24345 IN WP COND SIZE 10 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1 POINT 5 METERS Description : ALUMINIUM ALLOY ROD TO SPECN IS 733 1983 REAFFERMED 2006 GR 24345 IN WP COND SIZE 10 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1 POINT 5 METERS() Specification : ALUMINIUM ALLOY ROD TO SPECN.IS:733-1983 REAFFERMED 2006 GR. 24345 IN WP COND. WITH MECH.PROPERTIES RM-40 KGF/SQ.MM(MIN) RP 0.2-28 KGF/SQ.MM (MIN) A5-10 MIN SIZE:10 +/- 0.1MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1MM MAXIMU R Estab
Category : ddp
Grade : 1
Size : S
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316 Description : 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316() Specification : 0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316 R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND 32 MM DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD Description : STEEL ROUND 32 MM DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD() Specification : STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW D R Estab
Category : s
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION Description : COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION() Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT R Estab
Category : s
Grade : 3
Size : S
623 VINAYAK INDUSTRIES
55A DADA NAGAR DADA NAGAR KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 9839030745
GSTIN : 09AITPM9465A1ZQ 		AITPM9465A

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front Description : Rivet Flat Head for Housing Body Barrel Extension and Bracket Front() Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN FIXING SWIRAL BUTT FOR REVOLVER .32() ÄS PER DRAWING C Estab.
2) BUTT SCREW PIN FIXING BARREL FOR REVOLVER .32"() AS PER DRAWING C Estab.
3) SCREW PLATE BODY FOR REVOLVER .32() ÄS PER DRAWING C Estab.
4) STUD HAMMER FOR REVOLVER .32() ÄS PER DRAWING C Estab.
5) PIN FIXING BARREL FOR REVOLVER .32() ÄS PER DRAWING C Estab.
6) PIN HINGE COVER FOR AMOGH 5.56 MM() AS PER DRAWING C Estab.
7) PIN HAMMER FOR AMOGH 5.56 MM() AS PER DRAWING C Estab.
8) PIN LEVER CHANGE FOR AMOGH 5.56 MM() AS PER DRAWING C Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN FIXING SWIRAL BUTT FOR REVOLVER .32[70]() Specification : ÄS PER DRAWING C Estab
2) SCREW PLATE BODY FOR REVOLVER .32[70]() Specification : ÄS PER DRAWING C Estab
3) STUD HAMMER FOR REVOLVER .32[70]() Specification : ÄS PER DRAWING C Estab
4) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION[70]() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
5) PIN HINGE COVER FOR AMOGH 5.56 MM[70]() Specification : AS PER DRAWING C Estab
6) PIN HAMMER FOR AMOGH 5.56 MM[70]() Specification : AS PER DRAWING C Estab
7) PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN LEVER CHANGE TO DRG NO.AKC-10/5 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
8) Blank for Ring CAP for Carbine 9mm[01]() Specification : BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17 C Estab
9) Adopter for Cleaning of Bore by pull Through[70]() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
10) PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56[70]() Specification : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD TO DS CAT NO. 5315-009191 D.C.NO.26501-SA DT. 08.05.2010 IN FINISHED CONDITION. C Estab
11) PLUNGER DS CAT NO 1005 007901 IN FINISHED CONDITION FOR LMG 5 56[70]() Specification : PLUNGER TO DRG. NO. ARDE SK- 2825/34,DS CAT NO. 1005-007901 DC(I) NO. 26954-SA, DT. 04/10/16 IN FINISHED CONDITION C Estab
12) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56[70]() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
13) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56[70]() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
14) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16[70]() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
15) Pin straight headless for extractor to DS CAT NO 5315 009195[70]() Specification : PIN STRAIGHT HEADLESS FOR EXTRACTOR TO DRG. NO-ARDE/SK 2689/71. DS CAT NO-5315-009195.DC(I)NO-26930-SA DT-06.09.16 C Estab
16) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56[70]() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
17) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007[70]() Specification : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 C Estab
18) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.[70]() Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. R Estab
19) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
20) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.[70]() Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. C Estab
21) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION[70]() Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION C Estab
22) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM[70]() Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
23) BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION[70]() Specification : BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
24) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM[70]() Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION. C Estab
25) PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN HINGE COVER DRG NO AKC 01/15 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
26) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
27) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION[70]() Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION. C Estab
28) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56[70]() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
29) RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : RIVET SPACER DRG NO AKC 03/9 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
30) PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05[70]() Specification : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 C Estab
31) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99[70]() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
32) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99[70]() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
33) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99[70]() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
34) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION[70]() Specification : SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 C Estab
35) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99[70]() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
36) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99[70]() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
37) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION[70]() Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION C Estab
38) PLUNGER CATCH FOR MAG[70]() Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
39) ROLLER GUIDE FEED SLIDE UPPER FOR MAG[70]() Specification : DS CAT NO. 3120-004658, DC NO.27108-SA,DT.23-06-17 IN FINISHED CONDITION (MATL.ST ROD.10 MM DIA WILL BE SUPPLIED BY S.A.F.ON B/G FROM L.F.NO.0352001010AS PER DRG.AS PER DRG. C Estab
40) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG[70]() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
41) RING FRONT MOUNTING BUSH FOR MAG[70]() Specification : DS CAT NO. 3120-004655 DC(I) NO. 27108-SA DT-23.06.2017 IN FINISHED CONDITION. C Estab
42) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.[70]() Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. C Estab
43) RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.[70]() Specification : RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION. C Estab
44) SPLIT PIN SOLID HALF LINK PART NO B 32 EC[70]() Specification : DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION C Estab
45) WASHER PLUG FOR MAG[70]() Specification : DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
46) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.[70]() Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.) C Estab
47) BUSH RETAINING STEM for MAG[70]() Specification : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17 C Estab
48) SLEEVE LOCK PIN HEADED FOR MAG[70]() Specification : DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
49) PIN AUTO SEAR FOR JVPC[70]() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB C Estab
Category : P
Grade : III
Size :
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Pin Locking Butt Arms for JVPC Description : Pin Locking Butt Arms for JVPC() Specification : Pin Locking Butt Arms for JVPC 5.56MM as per drawing No. (0204-03-04-00-03-007-00DA) C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) WASHER BRAZING BUSH FOR MAG Description : WASHER BRAZING BUSH FOR MAG() Specification : S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LEVER LOCKING GAS CYLINDER FOR JVPC Description : PIN LEVER LOCKING GAS CYLINDER FOR JVPC() Specification : PIN LEVER LOCKING GAS CYLINDER FOR JVPC DRG NO. 0204-03-04-01-13-002-00DA C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN COCKING BRACKET FOR JVPC Description : PIN COCKING BRACKET FOR JVPC() Specification : PIN COCKING BRACKET FOR FOR JVPC 5.56MM AS PER DRAWING NO. (0204-03-04-11-18-005-00DA) C Estab
2) PIN GAS BLOCK AND BRACKET FORE SIGHT FOR JVPC Description : PIN GAS BLOCK AND BRACKET FORE SIGHT FOR JVPC() Specification : PIN GAS BLOCK & BRACKET FORE SIGHT FOR JVPC 5.56 MM AS PER DRAWING (204-03-04-11-18-006-00DA) C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) DETENT STUD COCKING SLIDE FOR MAG Description : DETENT STUD COCKING SLIDE FOR MAG() Specification : DETENT STUD, COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM Description : BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM() Specification : AS PER DRG. C Estab
2) Blank for Ring Cap Drg No. SK-5183 Description : Blank for Ring Cap Drg No. SK-5183() Specification : AS PER DRG. C Estab
3) Adopter for Cleaning of Bore by pull Through Description : Adopter for Cleaning of Bore by pull Through() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
4) PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56 Description : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56() Specification : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD TO DS CAT NO. 5315-009191 D.C.NO.26501-SA DT. 08.05.2010 IN FINISHED CONDITION. C Estab
5) PLUNGER DRG NO.ARDE SK 2825/34 Description : PLUNGER DRG NO.ARDE SK 2825/34() Specification : AS PER DRG. C Estab
6) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56 Description : PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
7) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
8) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
9) Screw special DRG. No. 5305-095385 Description : Screw special DRG. No. 5305-095385() Specification : As per Drg. C Estab
10) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
11) PIN STRAIGHT HEADLESS FOR EXTRACTOR FOR INSAS 5.56 MM Description : PIN STRAIGHT HEADLESS FOR EXTRACTOR FOR INSAS 5.56 MM() Specification : ARDE SK 2689/71 C Estab
12) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010 C Estab
13) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 Description : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007() Specification : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 C Estab
14) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. Description : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.() Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. C Estab
15) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. Description : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
16) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. Description : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.() Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. C Estab
17) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION Description : PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION() Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION C Estab
18) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM Description : PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM() Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
19) PLUNGER HOD FOR CARBINE 5 56 MM Description : PLUNGER HOD FOR CARBINE 5 56 MM() Specification : PLUNGER HOD TO DRG NO.AKC-08/5 FOR CARBINE5.56MM IN FINISHED CONDITION C Estab
20) BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION Description : BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION() Specification : BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
21) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM Description : PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM() Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION. C Estab
22) PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN HINGE COVER DRG NO AKC 01/15 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
23) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
24) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION Description : PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION() Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION. C Estab
25) RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : RIVET SPACER DRG NO AKC 03/9 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
26) PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 Description : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05() Specification : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 C Estab
27) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
28) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
29) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 Description : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
30) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
31) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION Description : SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION() Specification : SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 C Estab
32) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Description : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
33) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
34) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION Description : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION() Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION C Estab
35) PLUNGER CATCH FOR MAG Description : PLUNGER CATCH FOR MAG() Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
36) ROLLER GUIDE FEED SLIDE LOWER FOR MAG Description : ROLLER GUIDE FEED SLIDE LOWER FOR MAG() Specification : DS CAT NO.3120-004657 IN FINISHED CONDITION DC NO. 25298-SA , DT.19-03-02 (MAT.ST.RD.10 MM DIA GD.535A99 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0352001010 C Estab
37) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
38) RING FRONT MOUNTING BUSH FOR MAG Description : RING FRONT MOUNTING BUSH FOR MAG() Specification : DS CAT NO. 3120-004655 DC(I) NO. 27108-SA DT-23.06.2017 IN FINISHED CONDITION. C Estab
39) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. Description : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.() Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. C Estab
40) RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION. Description : RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.() Specification : RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION. C Estab
41) STOP PIN DETENT COCKI.SLIDE MAG 7.62MM Description : STOP PIN DETENT COCKI.SLIDE MAG 7.62MM() Specification : AS PER DRG. C Estab
42) SPLIT PIN SOLID HALF LINK PART NO B 32 EC Description : SPLIT PIN SOLID HALF LINK PART NO B 32 EC() Specification : DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION C Estab
43) WASHER PLUG FOR MAG Description : WASHER PLUG FOR MAG() Specification : DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
44) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. Description : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.() Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.) C Estab
45) BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 25338-SA DT-23.4.02 Description : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 25338-SA DT-23.4.02() Specification : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 25338-SA DT-23.4.02 C Estab
46) SLEEVE LOCK PIN HEADED FOR MAG Description : SLEEVE LOCK PIN HEADED FOR MAG() Specification : DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
47) PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN LEVER CHANGE TO DRG NO.AKC-10/5 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
48) PLUNGER FOR AMOGH CARBINE 5 56 Description : PLUNGER FOR AMOGH CARBINE 5 56() Specification : PLUNGER TO DRG. NO. ARDE SK 2689/87.IN FINISHED CONDITION DS CAT NO-1005-007827. DC(I)26547-SA,DTD-24.11.2010 C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF610 mm TO 914 mm WIDTH AND DIA OF ROLLS 450 mm TO 600 mm.SPECN.JSS 9310-03() Specification : JSS 9310-03 :2010 R Estab
2) CARTON FOR 12 BORE PAPER 2.1/2"() Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi) R Estab
Category : p
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302 Description : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302() Specification : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302(IN FINISH C SPECN BS 970 PT.1:1983 GRADE 080 M40 C Estab
2) PIN CATCH PIN SWIVEL HAMMER Description : PIN CATCH PIN SWIVEL HAMMER() Specification : FGK DRG. NO. PH -6-5 C Estab
3) SCREW PLATE BODY Description : SCREW PLATE BODY() Specification : FGK DRG. NO. PH-1-19/32-0119 C Estab
4) STUD HAMMER Description : STUD HAMMER() Specification : FGK DRG. NO. PH -2-4 C Estab
5) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivett solid piece guide DRG. No. SK- 5167C* Description : Rivett solid piece guide DRG. No. SK- 5167C*() Specification : As per Drg. C Estab
2) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
3) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) Screw block rear DRG. No. SK-3143/99 Description : Screw block rear DRG. No. SK-3143/99() Specification : As per Drg. C Estab
5) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
6) RIVET SNAP HEAD FOR SMALL ARMS Description : RIVET SNAP HEAD FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
7) SPRING DOWEL SLEEVE HEAVY Description : SPRING DOWEL SLEEVE HEAVY() Specification : SPRING DOWEL SLEEVE (HEAVY),DIA 2X7 IS:5988 C Estab
8) Housing Plunger to DS CAT NO 1005 007900 Description : Housing Plunger to DS CAT NO 1005 007900() Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16 C Estab
9) HOUSING FOR SMALL ARMS Description : HOUSING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
11) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
12) PIN FIXING SLEEVE FOR INSAS 5.56 MM Description : PIN FIXING SLEEVE FOR INSAS 5.56 MM() Specification : ARDE/SK 2825/9 C Estab
13) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
14) STOPPER FRONT FOR 5.56 MM INSAS Description : STOPPER FRONT FOR 5.56 MM INSAS() Specification : AS PER DRAWING C Estab
15) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
16) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
17) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
18) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
19) Bearing back sight pin Description : Bearing back sight pin() Specification : BEARING BACK SIGHT PIN,D S CAT NO-1005-000825 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26877-SA-DT.27-06-16 C Estab
20) Screw Socket Head DS CAT no. 5305-005081 Description : Screw Socket Head DS CAT no. 5305-005081() Specification : AS PER DRG. C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) PLUNGER HOD FOR CARBINE 5 56 MM Description : PLUNGER HOD FOR CARBINE 5 56 MM() Specification : PLUNGER HOD TO DRG NO.AKC-08/5 FOR CARBINE5.56MM IN FINISHED CONDITION C Estab
23) PIN LOCK BUTTON FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN LOCK BUTTON FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN LOCK BUTTON TO DRG NO.AKC-13/6* FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
24) PIN PLUNGER LOCK BUTT FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN PLUNGER LOCK BUTT FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN PLUNGER LOCK BUTT TO DRG NO.AKC-13/7* FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
25) LEVER CLAW FOR ARBINE 5 56MM IN FINISHED CONDITION Description : LEVER CLAW FOR ARBINE 5 56MM IN FINISHED CONDITION() Specification : LEVER CLAW TO DRG NO.AKC-13/4 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
26) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
27) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER() Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04 C Estab
28) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
29) PIVOT FEED LEVER FOR MAG Description : PIVOT FEED LEVER FOR MAG() Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02 C Estab
30) PLUNGER SPRING CATCH BUFFER BODY FOR MAG Description : PLUNGER SPRING CATCH BUFFER BODY FOR MAG() Specification : DS CAT NO. 1005-000577 DC(I) NO. 27011-SA DT. 14.01.17 IN FINISHED CONDITION. C Estab
31) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
32) PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION. Description : PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION.() Specification : PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION. C Estab
33) PIVOT PIN REAR SIGHT RAMP TO DS CAT NO. 5315-001522 DC(I) NO.25359-SA DT- 10.5.02 IN FINISHED CONDITION. Description : PIVOT PIN REAR SIGHT RAMP TO DS CAT NO. 5315-001522 DC(I) NO.25359-SA DT- 10.5.02 IN FINISHED CONDITION.() Specification : PIVOT PIN REAR SIGHT RAMP TO DS CAT NO. 5315-001522 DC(I) NO.25359-SA DT- 10.5.02 IN FINISHED CONDITION. C Estab
34) RETAINING PIN FEED STUD FOR MAG Description : RETAINING PIN FEED STUD FOR MAG() Specification : RETAINING PIN, FEED STUD TO DS CAT NO. 5315-001526 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
35) COCKING STUD TO DS CAT NO. 1005-006629 DC(I) NO. 25321-SA DT- 08.04.02 IN FINISHED CONDITION WITHOUT INDUCTION HARDENING. Description : COCKING STUD TO DS CAT NO. 1005-006629 DC(I) NO. 25321-SA DT- 08.04.02 IN FINISHED CONDITION WITHOUT INDUCTION HARDENING.() Specification : COCKING STUD TO DS CAT NO. 1005-006629 DC(I) NO. 25321-SA DT- 08.04.02 IN FINISHED CONDITION WITHOUT INDUCTION HARDENING. C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF 610 mm TO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS 9310 03 2010 REV 1 DC 5023 ME EXCEPT FOR BURSTING STRENGTH WHICH SHOULD BE BETWEEN 125 AND 250 KPa() Specification : JSS 9310 03 2010 REV 1 DC 5023 R Estab
2) CARTON FOR 12 BORE PAPER 2.1/2"() Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi) R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF 610 mm TO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS 9310 03 2010 REV 1 DC 5023 ME EXCEPT FOR BURSTING STRENGTH WHICH SHOULD BE BETWEEN 125 AND 250 KPa() Specification : JSS 9310 03 2010 REV 1 DC 5023 R Estab
2) CARTON FOR 12 BORE PAPER 2.1/2"() Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi) R Estab
Category : p
Grade : 3
Size : S
624 G.S Enterprises
C-16, Meerurt Road, Guldhar, Ghaiabad, Ghazziabad Uttar Pradesh
PIN1 : 201002
Phone No. : 9899972449
GSTIN : 09AHNPK8688C3ZO 		AHNPK8688C

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
2) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
3) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
4) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
5) Washer for 1000lbs (6220901111)[62]() Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY C Nonestab
6) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
7) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
8) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
9) TA BOLT M-20 (6120100107)[61]() Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840 DRG.ENCLOSED. C Nonestab
10) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Nonestab
11) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
12) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
13) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
14) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
15) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
16) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
17) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
18) WASHER FOR NOSE PLUG 1000LBS (6220901052)[62]() Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002, OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM. C Nonestab
19) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
20) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
21) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) WASHER TO DRG. NO. ARM 1172A17 (6220501000)[62]() Specification : WASHER RUBBAGLEX TO DRG.NO. ARM-1172 A 17. [DRG. ENCLOSED FOR DIMENSION ONLY C Nonestab
Category : ddp
Grade : 3
Size : S
625 MARK ENGINEERING
A-1, Ist Cross Main Road, Ambattur Industrial Estate Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26245971
GSTIN : 33AAPFM9569H1ZM 		AAPFM9569H

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) HALF LOOP Description : HALF LOOP TO DRG NO.20-01-136() Specification : HALF LOOP TO DRG NO.20-01-136 C Estab
Category : ddp
Grade : 3
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) MOUNTING OF FUEL FILTER ASSY[62]() Specification : MOUNTING OF FUEL FILTER ASSY TO DRG NO.SB 329-75-1 C Estab
2) REGULATOR LEVER[62]() Specification : REGULATOR LEVER TO DRG NO.SB 315-777-2 C Estab
3) DELIVERY VALVE ASSY[62]() Specification : DELIVERY VALVE ASSY TO DRG NO.SB 327-59-11 C Estab
4) PUMP ELEMENT[62]() Specification : PUMP ELEMENT TO DRG NO.SB 327-07-11 C Estab
Category :
Grade : Grade III
Size : S
626 PRAVIN ENGINEERING WORKS
S.NO.36,GALANDE IND.ESTATE,WADGAONSHERI WADGAONSHERI TO NAGAR ROAD PUNE Maharashtra
PIN1 : 411014
Phone No. : 7972491769
GSTIN : 27ADQPR1932B1ZJ 		ADQPR1932B

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SQUIB HOUSING TO ARDE DRG NO 0901 00 02 01 00 001 00PB Description : SQUIB HOUSING TO ARDE DRG NO 0901 00 02 01 00 001 00PB() Specification : SQUIB HOUSING TO ARDE DRG.NO.0901 00 02 01 00 001 00PB C Estab
Category : p
Grade : 3
Size : S
627 GENERAL ENGINEERING CORPORATION
VISHNU MALATI INDUSTRIAL ESTATE, S.NO. 77/1+2+3, SHIVANE PUNE MAHARASHTRA
PIN1 : 411023
Phone No. : 020-25290526, 25291054 MOB: 9890091451
GSTIN : 27AAMFG2259B1ZJ 		PNEG15367C

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CUP MOULDED WITH PINS & LID PINAKA() DRG.NO.HEMRL/IGN/PINAKA/DRG.006 DET NO.4 DT.11/05/2015 & DRG.NO.HEMRL/IGN/PINAKA/DRG.006, DET.NO.16 DT.11/05/2015. SPECN. HEMRL/IGN/PS-406. C Not Estab.
2) VENTURY ASSEMBLY FOR PARA FLARE() DRG NO OFDR/CT/14/UI A3 (AMDT NO.88 DT 9/5/98) C Not Estab.
3) BURSTER TUBE (STEEL) PARA FLARE RED() DRG.NO.OFDR/CT/19/UI/A-4 (AMDT NO.88 DT.9-5-98) C Not Estab.
4) CONTAINER WITH BASE & LID BUOYANT() DRG NO.OFDR/CT/1/M1/A3 AMDT AND DRG.NO.OFDR/CT/5/M1/A3 SPECN.NO. DGOF/OFDR/008. C Not Estab.
5) BODY ALUMINIUM FOR BOMB PRACTICE 3KG() DRG.NO. ARDE-2155 Shts - 2, SHEET NO.2, AL NO.24/04 DATED 09/9/04. C Not Estab.
6) NOSE ASSEMBLY FOR BOMB PRACTICE 3 KG() DRG.NO.ARDE 2024/DET.1 CONSISTING OF : (1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5 (5)MULTI-TOOTH LOCK WASHER B-6-4 TO C Not Estab.
7) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG() DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90. C Not Estab.
8) ADAPTER NOSE FOR 81MM MK-II abc() DRG NO. ARDE 1965 DET 4 PT.NO. ITV 114 SPECN.CQA(A) 2345 (C) C Not Estab.
9) CONTAINER STAR FOR 81MM MK-II() DRG NO ARDE 1965 DET 12 PT NO ITV 122, C-36047-A DT. 30/11/95 TO SPECN:CQA(A) NO.2345(C) C Not Estab.
10) CUP HALF (ALU) FOR 81MM ILLG MK-II() DRG. NO. ARDE 2222, PT NO. ITV 257 Sht-1 AND DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2 C Not Estab.
11) BODY UPPER FOR 81 MM ILLG. MK-II() DRG NO ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Not Estab.
12) BODY FOR 51 MM ILLG.() DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Not Estab.
13) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.1A () CQA(A) 2328 & CQA(A) 2332 C Not Estab.
14) BASE PLATE FOR BOMB 51MM ILLG.() DRG.NO. ARDE-2064, DET NO.14, PT NO ITV 231 SPECN. CQA(A) 2328 (d) C Not Estab.
15) CUP FOR BOMB 51MM ILLG.() DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Not Estab.
16) SET OF FIVE COMPONENTS UPPER SET OF 51MM ILLG.() CQA(A) 2328 C Not Estab.
17) DELAY TUBE FOR 51MM ILLG.() DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Not Estab.
18) NOSE CAP FOR 51 MM SMOKE() DRG.NO.ARDE-2082 DET.NO.7 PT.NO.ITV-215 SPECN.CQA(A) 2352(d) C Not Estab.
19) BODY EMPTY FOR 51 MM SMOKE() DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPECN.NO.CQA(A) 2352 (d) C Not Estab.
20) TAIL ADAPTER FOR 51 MM SMOKE() DRG.NO.CQA(A)/AMN/2935,DET NO.2 PT.NO.ITV- 274 SPECN. NO.CQA(A) 2352 (d) C Not Estab.
21) CONTAINER FOR 51 MM SMOKE () DRG.NO. CQA(A)/AMN/2935, DET NO.4 PT NO. ITV-275 SPECN. CQA(A) 2352 (d) C Not Estab.
22) COVER FOR 84 MM ILLG.() DRG.NO.F-1301-047932-B DC (I) 34754-A DT.10-11-1989 SPECN.F-1301-903340 C Not Estab.
23) SET OF 8 EMPTY COMPONENTS FOR SHELL 105MM IFG SMK. BE 3A() CQA(A) 4921 C Not Estab.
24) SET OF 8 EMPTY COMPONENTS FOR SHELL 105MM COLOUR SMOKE ORANGE() CQA(A) 2346(c) C Not Estab.
25) SET OF 9 COMPONENTS FOR SHELL 105 MM IFG ILLG. 2A() CQA(A) 4928 C Not Estab.
26) SPRING GUIDE FOR 120MM ILLG.() DRG.NO.ARDE-2011, PT.NO.ITV-140 DET NO 29 MAT. AL. ALLOY IS-738:1994. REAFFIRMED-1999, SPECN.NO.CQA(A) 2321 (b) C Not Estab.
27) STAR HOUSING FOR 120MM ILLG.() DRG. NO. ARDE 2011,DET 13 PT.NO.ITV-144 SPCEN.NO.CQA(A)2321 (b) C Not Estab.
28) WASHER CUPPED FOR 120MM ILLG.() DRG.NO.ARDE-2011 DET. 15, PT.NO.ITV-145 SPECN: NO.CQA (A)2321 (b) C Not Estab.
29) MAIN PARA.HOUSING FOR 120MM ILLG.() DRG.NO.ARDE 2011 DET NO. 19 PART NO. ITV 149 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN. CQA (A) 2321 (b) C Not Estab.
30) RING FOR 120MM ILLG.() DRG. NO. ARDE 2011,DET 24 PART NO.ITV-152 DC (I) 33655-A DATE 12-09-1984 MATL. STEEL TO SPECN. NO. IS: 1570C 40. C Not Estab.
31) DELAY HOLDER FOR 120MM ILLG.() DRG.NO. ARDE 2011 DET 11 PT NO.ITV 153 WITH NUT FOR DEALY HOLDER TO DRG.NO. ARDE 2011 DET 12 PT NO ITV 154 SPECN .NO CQA(A) 2321 (b) C Not Estab.
32) EYE BOLT FOR 120MM ILLG.() DRG.NO.OFDR/FT-464/A4 SPECN.NO. CQA(A) 2321 (b) C Not Estab.
33) COLLAR FOR 120MM ILLG.() DRG.NO.ARDE 2011 DET 8 PT NO. ITV-158 MATERIAL SPECN.IS 1570C-20 SPECN.NO. CQA (A) 2321 (b) C Not Estab.
34) WASHER STAR 32.512 MM 1-1/2" R/G/Y() WASHER STAR SIZE 32.512 MM OD X 9.525 MM ID X 0.508 MM THICK TO DRG.NO. ARM 1463 A 7. C Not Estab.
35) CLOSING CUP FOR 120 MM ILLG.() DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT.06-12-89. C Not Estab.
36) SQUIB FOR SIGNAL FLARE() DRG.NO.NAI(P)188 (PROV) CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG. NO NAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2 (PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (P C Not Estab.
37) STEEEL DISC FOR BUOYANT SMOKE ORANGE() DRG. NO.OFDR/CT/24/A3 (MILD STEEL(ZINC PLATED) (WT.50 GMS + 2.0 GMS) C Not Estab.
Category : P
Grade : III
Size : S
628 Ophal Optronics India Priavte Limited
No. 265, Sector 21A, Faridabad Sector 21A Faridabad Haryana
PIN1 : 121001
Phone No. : 4150412
GSTIN : 06AADCO2780M1Z5 		RTKO02692E

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) LF 7440207336 FOR SUP IR15 300[74]() Specification : 1.4X EXTENDER FOR SUP IR15-300 Drg No.1.4X EXTENDER FOR SUP IR15-300 1.4X EXTENDER FOR SUP IR 15-30 0 MM F/4 MOTORIZED CONTINUOUS ZOOM LENS C Nonestab
Category :
Grade : Grade III
Size : S
629 YOUNGMAN WOOLLEN MILLS PVT LTD
VILLAGE SSERA RAHON ROAD Ludhiana Punjab
PIN1 : 141007
Phone No. : 2690116
GSTIN : 03AAACY0912G1ZV 		AAACY0912G

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Double Layer bonded Polyester Fleece White 150 cm width[21]() Specification : IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) INNER LINING KNITTED FABRIC OUTER JACKET POLYESTER 145 GSM WIDTH 150 CM MIN[21]() Specification : INNER LINING KNITTED FABRIC (OUTER JACKET) POLYESTER 145 GSM WIDTH 150 CM. (MIN.) PANTONE SHADE NO. 19-0516 TPX SPECIFICATION :- AS PER APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) 100 Percent Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min[21]() Specification : 100% Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min specification :-Appendix "B" of Provisional Specification No. S/2594/C/CCWDCP/TC-15(a). Pantone Shade No 19-55513 TPX R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Polyester fleece fabric knitted O G 150 cm min[21]() Specification : SPECN: AS PER APPENDIX 'C' OF PROV. SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG (Imp)RELEVANT CLAUSE OF SPECIFICATION NO. IND/TC/1208 AS PER SPECIFICATION NO. IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : M
630 GBS INDUSTRIES,
W-82, Hingna MIDC, Nagpur-440016 Hingna MIDC Nagpur Maharashtra
PIN1 : 440016
Phone No. : 9827003726
GSTIN : 27AAOFG6529J1ZV 		AAOFG6529J

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Machining of 25LBS Bomb Body() As per Drg. & Specification C Not Established
2) Nose Adapter Bush() As per Drg. & Specification C Not Established
3) Base Adapter Bush() As per Drg. & Specification C Not Established
4) Machining of Cylinder() As per Drg. & Specification C Not Established
5) Bush of Base Booster Casing() As per Drg. & Specification C Not Established
6) Adapter Bush() As per Drg. & Specification C Not Established
7) Machining of Lifting Plug() As per Drg. & Specification C Not Established
Category : DP
Grade : I,II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) BUSH OF BASE BOOSTER CASING TO DRG NO AAIW BS 0072 2A[08]() Specification : A) COMPONENT WILL BE SUPPLIED BY THE FIRM WITH FIRM MATERIAL B) MATERIAL TEST CERTIFICATE FROM NABL ACCREDIATED LAB SHOULD BE SENT ALONG WITH COMPONENTS. C) INSPECTION BY AAIW, KHAMARIA OR HIS AUTHORIZED REPRESENTATIVE. C Nonestab
Category : DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name Specification Use Status
1) STD CASSETTE CONTAINER[42]() Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) SPECIAL CASSETTE CONTAINER[42]() Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Nonestab
2) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]() Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM. C Nonestab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUP YA 5 FOR A30 T DET[65]() Specification : CUP YA-5 FOR A30-T(DET) TO DRG NO. FOR PRIMER DETONATOR A-30-T CQA(A)/AMMN/2856, DC NO-37271.A DT. 08.11.10 SCANNED ON DT DT. 05.01.2011 C Nonestab
2) CAP KG 4 FOR A30 T DETONATOR[65]() Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90 Description : BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90() Specification : BOLT,ECCENTRIC ASSY CAT PART NO.14/5306-003416 TO CQA(EE) DRG.CAT.NO.1189K DT.9/4/90 . C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156250 TUBE DELAY(4 SECOND) PT.DRG.IQX 943[61]() Specification : TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011 C Nonestab
2) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]() Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14. C Nonestab
3) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]() Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL C Nonestab
4) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]() Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM. C Nonestab
5) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
6) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 P Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
3) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]() Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
3) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
4) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]() Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED)[62]() Specification : GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417[00]() Specification : ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417[00]() Specification : ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417 C Nonestab
2) LOADING BEAM ASSEMBLY HD SYSTEM TO DRG NO ADRDE 1405 6245141405[62]() Specification : LOADING BEAM ASSEMBLY HD SYSTEM TO DRG. NO. ADRDE-1405 C Nonestab
3) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]() Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM. C Nonestab
4) ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG NO ADRDE 1403 02 6245141403[62]() Specification : ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG. NO. ADRDE-1403-02 C Nonestab
5) BRACKET MIDDLE TO DRG NO ADRDE 1403 01 01 08A 6245141411[62]() Specification : BRACKET MIDDLE TO DRG NO ADRDE-1403-01-01-08A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL R Nonestab
2) 6432300008 MS PLATE 3MM TH PHOS ERA[64]() Specification : IS:2062-1994 C Nonestab
3) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
4) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
5) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Nonestab
6) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
7) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]() Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008 C Nonestab
8) 6432420001 LEG ASSY DRG ITX 46 SA[64]() Specification : LEG ASSEMBLY TO DESIGNER'S REF. NO. ARDE-1521, DRG.PART NO. ITX-46 SA DC NO. 35824-A. R Nonestab
9) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
10) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451100 SADDLE ASSLY FOR CHARGE 145 MM[63]() Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV. 00 OF 09/2008. C Nonestab
2) 6334402000 MS BLOCK FOR PROFING HDC I AND II[63]() Specification : M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B C Nonestab
3) 6334401100 SET A FOR HDC I CONSISTING OF 4 NOS[63]() Specification : SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL/ C Nonestab
4) 6334402200 SET A FOR HDC II CONSISTING OF 5[63]() Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/117 C Nonestab
5) 6334401200 SET B SADDLE ASSY CONSIST 4 HDC I[63]() Specification : SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 10 C Nonestab
6) 6334402300 SET B SADDLE ASSY FOR HDC II CON 4[63]() Specification : SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM[01]() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030123 ERA MOUNTING PLATE ASSY STD[01]() Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES C Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]() Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES C Nonestab
Category : p
Grade : Grade III
Size : S
631 DYNAMIC FLOW PRODUCTS PVT.LTD.
UNIT NO.1,2,5, SAMIULLAH KHAN COMPOUND VAKANPAD PELHAR Maharashtra
PIN1 : 401208
Phone No. : 9322599811
GSTIN : 27AACCD3013F1Z8 		MUMD13438F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) TORSION BAR FORGING 3991051007[39]() Specification : AS PER DG C Nonestab
2) SHAFT TORSION FORGING 3996411023[39]() Specification : AS PER VQC C Nonestab
Category :
Grade : Grade III
Size : M
632 PEMRAJ INDUSTRIES
1194/18 a krishnanand bulding ghole road near icici bank 1194/18 a krishnanand bulding, ghole road near icici bank pune Maharashtra
PIN1 : 411005
Phone No. : 25535663
GSTIN : 27AAOPD8572G1ZD 		AAOPD8572G

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF ALUMINIUM ALLOY 33 POINT 5 Description : CONVERSION OF ALUMINIUM ALLOY 33 POINT 5() Specification : CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE - 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D Description : CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D() Specification : CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D C Estab
Category : dp
Grade : 3
Size : S
633 Tonbo Imaging India Private Limited
No. 3, Chikkayellappa Tower - II, 1st C Main Sarjapura Main Road, Jakkasandra Extension, Chikkayellappa Indl. Layout Bengaluru Karnataka
PIN1 : 560034
Phone No. : 41999555
GSTIN : 29AAHCS8134P1ZJ 		BLRS14459E

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) INFRARED LENS ASSEMBLY 50MM[74]() Specification : INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREAT C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) THERMAL ENIGNE 17 MICRON[74]() Specification : THERMAL ENIGNE (17 MICRON) INTEGRATED WITH DISPLAY UNIT AS PER SPECIFICATION-36 C Nonestab
Category : ddp
Grade : 3
Size : S
634 IMT CABLES PRIVATE LIMITED
A-96, MAYAPURI INDUSTRIAL AREA PHASE-II DELHI Delhi
PIN1 : 110064
Phone No. : 011281166
GSTIN : 06AAACI9090D1ZO 		DELI04110B

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) BPVLE WIRES OF DIFFERENT SIZES[15]() Specification : TY-16-505-911-76 R Nonestab
2) BPVL WIRES OF DIFFERENT SIZES[15]() Specification : TY-16-505-911-76 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) BPVLZ WIRE Zero point 35 SQMM TO 95 SQMM[07]() Specification : T? 16-505.911-76 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Annealed Tinned Copper Wire as per Attached OFCd specification[70]() Specification : OFCd specification No WD/06 -A dated. 04.04.2023 R Estab
Category :
Grade : Grade III
Size : S
635 H.V Technologies
B-7, Phase II, Transport Nagar, Dehradun Behind FCI Godown Dehradun Uttarakhand
PIN1 : 248002
Phone No. : 7500464464
GSTIN : 05ADLPK2540H1ZR 		MRTH00949E

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) silver nitrate LF 1001713302[10]() Specification : SILVER NITRATE AR GRADE 99.9% E Nonestab
Category :
Grade : Grade III
Size : S
636 TULASI ENGINEERING WORKS
Plot No: 2C / 15, Phase-1, I.D.A, PATANCHERU TELANGANA
PIN1 : 502319
Phone No. : 08455-241081
GSTIN : 36ADUPR9267K1ZD 		HYDV05780F

Download 		1) Ordnance Factory Medak
Name Specification Use Status
1) RING () 675-65-492 C Not Estab
2) HEAVY MACHINING OPERATIONS() As per drawing C Not Estab
Category : P
Grade : II
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]() Specification : AS PER DRAWING. C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[03]() Specification : AS PER DRAWING. C Nonestab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur
Name Specification Use Status
1) SPACER AS PER DRG No IWP 1271[41]() Specification : SPACER AS PER DRG No IWP 1271 C Estab
Category :
Grade : Grade III
Size : S
637 INSTRUMECH
5, RAJANI MUKHERJEE ROAD, KOLKATA WEST BENGAL
PIN1 : 700038
Phone No. : 03324031057
GSTIN : 19ALQPS6148C1ZM 		CALP08122C

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) LAMP WANDERING 1A AS PER DRG. NO. MCT-3212.() As per required Specification C Not Estab.
2) LAMP HEAD ATTACHMENT AS PER DRG. NO. MCT-3211.() As per required Specification C Not Estab.
Category : P
Grade : III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) CONTAINER CELL[74]() Specification : CONTAINER CELL 1a MCT-3075 FOR LAMP GUN LAYING 1A AS DR.NO.:MCT-3075 C Nonestab
2) FACE MASK TO DRG NO.MCT-1337 COMPRISING OF DRG NO. MCT-1885,1337/1 SH.-3 1878/1, 1879/1, 1337/1 SH.-2, 1860/1, 1886/1 ASSY DRG NO.MCT-1337[74]() Specification : FACE MASK TO DRG NO.MCT-1337 COMPRISING OF DRG NO. MCT-1885,1337/1 SH.-3 1878/1, 1879/1, 1337/1 SH.-2, 1860/1, 1886/1 ASSY DRG NO.MCT-1337 C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) 120 DEGREE CSK HEAD ALLUMINUM RIVET I S 9089[17]() Specification : 120 DEGREE CSK HEAD ALLUMINUM RIVET 1.6MM X5MM I S-9089 C Nonestab
2) BOLT LATCH TO DRG NO MCT 3103 FOR MT TELESCOPE 102A[74]() Specification : BOLT,LATCH TO DRG.NO. MCT-3103.FOR MT.TELESCOPE 102A C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPODE FIRE CONTROLL INSTT.101A TO DRG NO.CII-369 SPCN NO.CII-166(LATEST)() AS PER SPECIFICATION C Not estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) LEVEL FIRE CONTROL INSTRUMENT AS PER DRG. NO. IRDE-1135/SA-1[74]() Specification : LEVEL FIRE CONTROL INSTRUMENT AS PER DRG. NO. IRDE-1135/SA-1 C Nonestab
2) LAMP GUN MOUNTED 4A MCT-3210[74]() Specification : LAMP GUN MOUNTED 4A MCT-3210 C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434[74]() Specification : CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434 C Nonestab
Category : ddp
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) ALUMINIUM RIVET FLAT HEAD DIAMETER 2 MM LENGTH 6 MM CONFIRMING TO IS 2155[17]() Specification : ALUMINIUM RIVET FLAT HEAD DIAMETER=2 MM & LENGTH = 6 MM CONFIRMING TO IS-2155 C Nonestab
2) ADAPTER TO DRG NO MCT 2875[74]() Specification : ADAPTER TO DRG.NO. MCT-2875 C Nonestab
3) BAG NO 3 WITH SLING EMPTY CASE CARRYING FOR TELESCOPIC SIGHT FFV 625 GF 215125 CAT PT NO 1240 002623[00]() Specification : BAG NO 3 WITH SLING EMPTY/CASE CARRYING FOR TELESCOPIC SIGHT FFV-625 (GF-215125) CAT/PT.NO.1240-002623. C Nonestab
4) BATTERY COUNTER DRG NO OS 13589[74]() Specification : BATTERY COUNTER DRG.NO.OS-13589 C Nonestab
5) BATTERY HOUSING TO DRG NO MCT 1967 2[00]() Specification : BATTERY HOUSING TO DRG.NO. MCT-1967/2 C Nonestab
6) BLOCK AS PER DRG NO MCT 3283 FOR COLLIMETER INFINITY 102 A[74]() Specification : BLOCK AS PER DRG.NO.MCT-3283 FOR COLLIMETER INFINITY 102 A C Nonestab
7) BLOCK LOCKING AS PER DRG NO MCT 3271 1 FOR SIGHT DIAL 104A[74]() Specification : BLOCK LOCKING AS PER DRG.NO. MCT-3271/1 FOR SIGHT DIAL 104A C Nonestab
8) BLOCK TO DRG NO MCT 3091 FOR MT TELESCOPE 102A[74]() Specification : BLOCK TO DRG.NO-MCT-3091 FOR MT.TELESCOPE 102A C Nonestab
9) BOLT LATCH TO DRG NO MCT 3103 FOR MT TELESCOPE 102A[74]() Specification : BOLT,LATCH TO DRG.NO. MCT-3103.FOR MT.TELESCOPE 102A C Nonestab
10) BRACKET AS PER DRG NO MCT 3282[74]() Specification : BRACKET AS PER DRG.NO.MCT-3282 C Nonestab
11) BRACKET DRG NO CQA I 796 1[74]() Specification : BRACKET DRG.NO.CQA(I)-796/1 C Nonestab
12) BRACKET DRG NO IRDE 2048 1 MCT 3150[74]() Specification : BRACKET DRG NO.IRDE 2048/1 MCT-3150 C Nonestab
13) BUCKLE TO DRG NO IRDE 2001 65[00]() Specification : BUCKLE TO DRG NO.IRDE-2001/65 C Nonestab
14) BUSHING SLEEVE AS PER DRG NO IRDE 335 76[74]() Specification : BUSHING, SLEEVE, OD 22.9MM AS PER DRG.NO.: IRDE-335/76 C Nonestab
15) BUTT HINGES MILD STEEL FLAP IS1341[19]() Specification : BUTT HINGES MILD STEEL. SIZE-2"LONG X 5/8"FLAP IS-1341 C Nonestab
16) BUSH FOR DIRECTOR FIRE CONTROL NO 7 DRG NO MCT 2446[74]() Specification : BUSH FOR DIRECTOR FIRE CONTROL NO.7. DRG.NO.MCT-2446 C Nonestab
17) C SK HD SCREW M2X3 BRASS IS1365 FOR SU 102B[17]() Specification : C.SK.HD.SCREW M2X3 BRASS IS-1365 FOR S.U 102B. C Nonestab
18) CAP TO DRG NO MCT 2433 FOR D7[74]() Specification : CAP TO DRG.NO, MCT-2433 FOR D-7 C Nonestab
19) CASE DRG NO OS 34611[74]() Specification : CASE DRG.NO.:OS-34611 C Nonestab
20) CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A DRG NO MCT 1699 COMPRISING OF MCT 1695 1 MCT 1704 1 MCT 1705 1 MCT 1706 1 MCT 1707 1[00]() Specification : CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A,DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY) C Nonestab
21) CASE CANVAS TO DRG NO MCT 1415[00]() Specification : CASE CANVAS TO DRG NO. MCT-1415 C Nonestab
22) CASE CANVAS TO DRG NO CWC 246 FOR PNVB L W M 1[00]() Specification : CASE CANVAS TO DRG NO.CWC-246 FOR PNVB(L/W) M-1 C Nonestab
23) CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO MCT 2964 2 FOR HR BINO 8X30[74]() Specification : CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30. C Nonestab
24) CASE CARRYING TO DRG NO MCT 1925 3[74]() Specification : CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A) C Nonestab
25) CASE TO DRG NO MCT 2483 3[74]() Specification : CASE TO DRG,NO. MCT-2483/3 C Nonestab
26) CLAMP FINISH TO DRG NO MCT 2103[74]() Specification : CLAMP(FINISH) TO DRG NO. MCT-2103 C Nonestab
27) CORNER PIECE FOR BASE PLATE TO DRG NO MCT 874 1[00]() Specification : CORNER PIECE FOR BASE PLATE TO DRG NO. MCT-874/1 C Nonestab
28) CONTAINER AS PER DRG NO IRDE 335 68[74]() Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68 C Nonestab
29) CORNER CASE LOWER MCT 3261[74]() Specification : CORNER CASE LOWER MCT-3261 C Nonestab
30) COVER CANVAS 4 A TO DRG NO MCT 2759[00]() Specification : COVER CANVAS 4 A TO DRG.NO.MCT-2759 C Nonestab
31) COVER CANVAS AS PER DRG NO MCT 1461 NOTE EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG INDIVIDUALLY PACKED[00]() Specification : COVER CANVAS AS PER DRG NO. MCT-1461 NOTE:EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY PACKED) C Nonestab
32) COVER PLATE AS PER DRG NO IRDE 335 8[74]() Specification : COVER, PLATE AS PER DRG.NO.:IRDE-335/8 C Nonestab
33) CSK HD MC SCREW M3X5 LONG BRASS FOR FOR S U C 102B[17]() Specification : CSK HD MC SCREW M3.0X5.0 LONG BRASS FOR FOR S.U.C. 102B. C Nonestab
34) DIAL SCALE TELESCOPE 102A[74]() Specification : DIAL SCALE,II TO DRG.NO. MCT-3109.FOR MT.TELESCOPE 102A C Nonestab
35) DIAL SCALE 1 TO DRG NO MCT 3093 FOR MT TELESCOPE 102A[74]() Specification : DIAL SCALE -1 TO DRG.NO.MCT-3093 FOR MT.TELESCOPE 102A C Nonestab
36) DOVE TAIL BOX DRG NO IRDE 2048 42 MCT2099[74]() Specification : DOVE TAIL BOX DRG NO.IRDE-2048/42 MCT-2099 C Nonestab
37) DOVETAIL COMPLETE TO DRG NO MCT 2230 3 FOR DAY SIGHT RIFLE[74]() Specification : DOVETAIL COMPLETE TO DRG NO.MCT-2230/3 FOR DAY SIGHT RIFLE 5.56MM C Nonestab
38) FASTENER SET TURN LOCK DRG NO MCT 1189 1[00]() Specification : FASTENER SET,TURN LOCK DRG NO.MCT-1189/1 C Nonestab
39) FRAME WITHOUT ENGRAVING AS PER DRG NO MCT 3468[74]() Specification : FRAME WITHOUT ENGRAVING AS PER DRG.NO.MCT-3468 NOTE:SAMPLE APPROVAL IS REQUIRED BEFORE BULK SUPPLY C Nonestab
40) FRP CASE CARRYING[74]() Specification : FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS) C Nonestab
41) HOOK SAFETY NO 3 TO DRG NO MCT 695 1 7 SHEETS[17]() Specification : HOOK SAFETY NO-3 TO DRG.NO. MCT-695/1, 7 SHEETS. C Nonestab
42) HOUSING ASSLY MCT2288 COMPRISING OF MCT2397 1 MCT 2396 MCT 2290[74]() Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290 C Nonestab
43) HOUSING OBJECTIVE TO DRG NO CQA I 793 44 FOR MK III[74]() Specification : HOUSING,OBJECTIVE TO DRG NO. CQA(I)-793/44 1/SET FOR MK-III C Nonestab
44) METAL CASE TO DRG NO MCT 1999 FOR BORE MUZZLE SIGHT[74]() Specification : METAL CASE TO DRG NO. MCT-1999 FOR BORE MUZZLE SIGHT. C Nonestab
45) LEVEL INDICATOR TO DRG NO MCT 3250 FOR CLINOMETER 2A 46[74]() Specification : LEVEL INDICATOR TO DRG.NO.MCT-3250 FOR CLINOMETER 2A 46 C Nonestab
46) LEVER CONTROL HAND TO DRG NO MCT 3244 FOR SIGHT DIAL104A[74]() Specification : LEVER CONTROL HAND TO DRG.NO.MCT-3244 FOR SIGHT DIAL104A C Nonestab
47) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 1 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2. C Nonestab
48) SCREW DRIVER[00]() Specification : SCREW DRIVER NO.7 TO DRG NO.MCT-796/2 C Nonestab
49) SLING CARRYING CASE[00]() Specification : SLING CARRING CASE ,MCT-1513 C Nonestab
50) SPRING DRG NO MCT 2982 FOR DRIVER DAY PERISCOPE SIDE AND COMMANDER DAY EPISCOPE[74]() Specification : SPRING DRG.NO.MCT-2982, FOR DRIVER DAY PERISCOPE SIDE & COMMANDER DAY EPISCOPE C Nonestab
51) SPRING HELICAL COMPRES MCT850 2[00]() Specification : SPRING HELICAL COMPRESSION AS PER DRG. MCT-850/2 C Nonestab
52) SPRING MCT 3081[00]() Specification : SPRING AS PER DRG.NO. MCT-3081 C Nonestab
53) WASHER TO DRG MCT 3114 1 FOR SUC 102B[74]() Specification : WASHER TO DRG. MCT-3114/1 FOR SUC-102B C Nonestab
54) WASHER TO DRG NO IRDE 1274 2 MCT 1313[00]() Specification : WASHER TO DRG NO,IRDE-1274/2(MCT-1313) C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]() Specification : Vial Level Circular Cased MK 2 MCT 3439 C Estab
2) ENGRAVING OF SCALE ARTILLERY[74]() Specification : ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES) R Estab
3) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138[74]() Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370, C Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]() Specification : Vial Level Circular Cased MK 2 MCT 3439 C Estab
2) ENGRAVING OF SCALE ARTILLERY[74]() Specification : ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES) R Estab
3) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138[74]() Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370, C Estab
4) CASE ARTILLERY AND MAP BOARDS MK 2[74]() Specification : CASE, ARTILLERY AND MAP BOARDS, MK 2 AS PER DRG.NO.: O.S.30986(17 SHEETS) C Estab
5) CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)[74]() Specification : CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) C Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]() Specification : Vial Level Circular Cased MK 2 MCT 3439 C Estab
2) ENGRAVING OF SCALE ARTILLERY[74]() Specification : ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES) R Estab
3) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138[74]() Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370, C Estab
4) CASE ARTILLERY AND MAP BOARDS MK 2[74]() Specification : CASE, ARTILLERY AND MAP BOARDS, MK 2 AS PER DRG.NO.: O.S.30986(17 SHEETS) C Estab
5) CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)[74]() Specification : CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) C Estab
6) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 CII 253 2[74]() Specification : R Nonestab
Category : P
Grade : II
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) MAGAZINE ASSY FOR ASHANI MK III IN FC AS PER DRG NO:- CTM-158 B[70]() Specification : MAGAZINE ASSY. FOR ASHANI MK-III IN F/C AS PER DRG NO:- CTM-158 B C Nonestab
2) MAGAZINE ASSY FOR POINT 32 INCH PISTOL WITHOUT NICKEL PLATING AS PER DRG NO: CTM-180[70]() Specification : MAGAZINE ASSY FOR 0.32 INCH PISTOL (MK-1M) WITHOUT NICKEL PLATING IN F/C AS PER DRG NO: CTM-180 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SPANNER RING 51A CAT NO 5120 003896 0004[90]() Specification : SPANNER RING 51A CAT NO 5120 003896 0004 C Nonestab
2) SPANNER 36A ICM 1595 SPANER 36A 0026[90]() Specification : SPANNER 36A ICM 1595 SPANER 36A 0026 C Nonestab
3) SPANNER RING 52A PT NO 5120 003897[90]() Specification : SPANNER RING 52A PT NO 5120 003897 C Nonestab
4) SPANNER 35A TO DRG NO 5120 003114[90]() Specification : SPANNER 35A TO DRG. NO.5120-003114 C Nonestab
5) 9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122[90]() Specification : 9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122 C Nonestab
6) 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120[90]() Specification : 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120 C Nonestab
7) 9080081577 SPANNER WRENCH TO DRG NO 5140 000205[90]() Specification : 9080081577 SPANNER WRENCH TO DRG NO 5140 000205 C Nonestab
8) 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119[90]() Specification : 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119 R Nonestab
9) 9080081479 SPANNER 44 A TO DRG NO 5120 003116[90]() Specification : 9080081479 SPANNER 44 A TO DRG NO 5120 003116 R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SHACKLE 4030 00093 FOR APPARATUS[90]() Specification : SHACKLE 4030-00093 FOR APPARATUS TO DRG NO DS CAT-4030-000493 C Nonestab
2) SHACKLE D6P TA 720802DRG 4030 000373[90]() Specification : SHACKLE D6P TA 720802 DRG 4030-000373 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SPANNER, 36A (ICM. 1595) SPANNER, 36A (ICM-1595) TO DRG. NO. 5120-003117[90]() Specification : SPANNER, 36A (ICM. 1595) SPANNER, 36A (ICM-1595) TO DRG. NO. 5120-003117 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9080080400 SPANNER SOCKET DOUBLE ENDED[90]() Specification : DS CAT NO. 5120-004555 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) 0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION.[14]() Specification : 0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION. NOTE:- FIRM MAY GIVE ALT. OFFER OF THE BOX WITH STEEL LOCK(PLATED GOLDEN COLOUR) INSTEAD OF BRASS LOCK REMAINING OTHER PARAMETER UNCHANGED E Nonestab
Category :
Grade : Grade III
Size : S
638 Tamil Nadu Tools & Hardwares
128/260, Angappa Naicken Street, CHENNAI TAMIL NADU
PIN1 : 600001
Phone No. : 044 42130115
GSTIN : 33AAAPH3002R1Z0 		AAAPH3002R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) AIR BLOW GUN() As per specifications E Estab.
2) ALLEN KEY () As per specifications
3) ANABOND 200 () As per specifications
4) ARALDITE ADHESIVE() As per specifications
5) BAG() As per specifications
6) BANJO BOLT () As per specifications
7) BEE WAX () As per specifications
8) BEND MS GALVANISED () As per specifications
9) BOLT M.S. HEX.HEAD () As per specifications
10) BRASS WIRE BRUSH() As per specifications
11) BUFFALO LEATHER FOR GASKET () As per specifications
12) BUSH OD 22MM X ID 19MM X25MM LG () As per specifications
13) BUTTERFLY VALVE() As per specifications
14) BUTTON CELL (1.5V) () As per specifications
15) CAPILLARY TUBE IMPULSE LINE FOR ETH() As per specifications
16) CAST COPPER ANODE () As per specifications
17) COMBINATION SIDE CUTTING PLIER () As per specifications
18) COTTON CLOTH BAGS() As per specifications
19) CENTRE DRILL() As per specifications
20) CHALK WHITE () As per specifications
21) C.I.PLAIN MACHINABLE ELECTRODE10SWG () As per specifications
22) CHUCK KEY () As per specifications
23) CLIP STEEL(OPEN TYPE)FOR CEILING () As per specifications
24) COMBINATION SPANNER () As per specifications
25) COUNTERSINK TOOL () As per specifications
26) COUNTING SCALE () As per specifications
27) CROCODILE CLIP () As per specifications
28) DOUBLE EYE POLYESTER WEB SLINGS () As per specifications
29) DRILL SLEEVE () As per specifications
30) DUNLOP ADHESIVE S-758 () As per specifications
31) ELECTRODE MS ROD () As per specifications
32) ELECTRONIC ETCHING MACHINE () As per specifications
33) ENGINE OIL SAE 15W40 () As per specifications
Category : P
Grade : II
Size : S
639 APAR INDUSTRIES LTD.
Survey No. 82/2/P1, 88, 861/1. 862/1 & 863/1, Manepkur Road, Khatalwada, Tal. Umbergaon, Dist. Valsad, Gujarat
PIN1 : 396120
Phone No. : 0260-2401600
GSTIN : 24AAACG1840M1ZR 		MUMA42643G

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) 19X34, SINGLE CORE, SHIELDED, SILVER PLATED COPPER WIRE, ENCLOSED IN TEFLON COATED SLEEVE-BLACK() AS PER DGNAI SPECN. R Not Estab.
2) 19X34, SINGLE CORE, SHIELDED, SILVER PLATED COPPER WIRE, ENCLOSED IN TEFLON COATED SLEEVE-RED() AS PER DGNAI SPECN. R Not Estab.
Category : DP
Grade : II
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) Set of EBXL cables as per Annexure A[71]() Specification : Set of EBXL cables as per Annexure A C Nonestab
Category : p
Grade : Grade II
Size : L
640 USAI FORGE PRIVATE LIMITED
"KAMINENI" 4TH FLOOR, KING KOTI ROAD, HYDERABAD ANDHRA PRADESH
PIN1 : 500001
Phone No. : 04024755544
GSTIN : 36AAACU9149B1ZD 		HYDU01162A

Download 		1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) PRE-MACHINING OF HR BODY RGB -60() AS PER DRAWING. C NOT ESTAB
2) ASSY FIN FOR RGB-60() AS PER DRAWING. C NOT ESTAB.
3) CHAMBER FORE MOTOR FOR RGB - 60.() AS PER DRAWING. C NOT ESTAB.
4) CHAMBER AFT MOTOR FOR RGB - 60.() AS PER DRAWING. C NOT ESTAB
Category : P
Grade : II
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) PLANET IV TRAIN() DRG NO.175.40.140/F C Not Established
2) REQUIREMENT OF FORGINGS (FOR 1.5KG TO 18KG)() AS PER DRG C Non Established
Category : P
Grade : II
Size : L
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) ADAPTER FORGING FOR BOAT TAIL.REV.8() AS PER HAPP DRG NO OADF 155 2010 REV.8 C NOT ESTAB
Category : P
Grade : I
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SHELL 105MM IFG HE A/L FORGED STEEL Description : SHELL 105MM IFG HE A/L FORGED STEEL() Specification : DRG.PART NO.ISX-46GE SHEET-1 DC NO.37366-A, DT.26.07.14 & SHEET-2 DC NO. 37366-A, DT.26.07.14. C Estab
Category : p
Grade : 2
Size : L