List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
681 APM INDUSTRIESZ
46/2 STROTTEN MUTHIA STREET 46/2 STROTTEN MUTHIA STREET CHENNAI Tamil Nadu
PIN1 : 600079
Phone No. : 42162984
GSTIN : 33AAOPM3992R1ZQ 		AAOPM3992R

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cross Linked Polyethylene Foam 3 mm[21]() Specification : As per specification E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Poly Carbonate Film zero point 5 mm 1000 x 2004 mm Cut Sheet[21]() Specification : As per uploaded file C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) ELASTIC TAPE OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
2) CORD ELASTIC OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
3) TAPE POLYESTER OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
4) TAPE NYLON OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
5) WEBBING NYLON POLYESTER OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
6) CORD NYLON / POLYESTER OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
7) ROPE POLYPROPYLENE OF VARIOUS SIZE AND COLOUR() AS PER SPECIFICATION E NOT ESTABLISHED
Category : DP
Grade : II
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING PASGT MEDIUM() Specification : AS PER ENCLOSURE E Nonestab
2) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING PASGT LARGE() Specification : AS PER ENCLOSURE E Nonestab
3) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING ACH MICH MEDIUM() Specification : AS PER ENCLOSURE E Nonestab
4) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING MICH LARGE() Specification : AS PER ENCLOSURE E Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CERAMIC PLATES USED IN MANUFACTURE OF FRONT BACK HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE STANDARD (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ATTACHED SPECIFICATION R Nonestab
2) CERAMIC PLATES USED IN MANUFACTURE OF FRONT BACK HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE LARGE(Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ATTACHED SPECIFICATION R Nonestab
3) CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE STANDARD (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ATTACHED SPECIFICATION R Nonestab
4) CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE LARGE(Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ATTACHED SPECIFICATION R Nonestab
5) CERAMIC PLATES USED IN MANUFACTURE OF FRONT BACK HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE EXTRA LARGE (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : 1201909/003(a) R Nonestab
6) CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE EXTRA LARGE (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : 1201909/003(a) R Nonestab
7) 8MM THICKNESS HEX ALLOY HEX TILES (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ENCLOSURE R Nonestab
8) 5 point 5 MM THICKNESS HEX TILES SiC CERAMIC TILE SET FOR COMPLETE BRJ SIZE MEDIUM (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ENCLOSURE R Nonestab
9) 5 point 5 MM THICKNESS HEX TILES SiC CERAMIC TILE SET FOR COMPLETE BRJ SIZE LARGE (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ENCLOSURE R Nonestab
10) 5 point 5 MM THICKNESS HEX TILES SiC CERAMIC TILE SET FOR COMPLETE BRJ SIZE EXTRA LARGE(Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)() Specification : AS PER ENCLOSURE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) UHMWPE UD FABRIC HAP GRADE AU 1135 (As a Sole Selling Agent of OEM M/s. Akiro Protech Pvt Ltd, Bengaluru)() Specification : AS PER ATTACHMENT R Nonestab
2) UHMWPE UD FABRIC SAP GRADE AU 2170 (As a Sole Selling Agent of OEM M/s. Akiro Protech Pvt Ltd, Bengaluru)() Specification : AS PER ATTACHMENT R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) PARA ARAMID FILAMENT YARN 3360 DTEX {Authorised dealer of OEM M/s. Teijin India Pvt ltd. Maharastra}() Specification : AS PER ENCLOSURE R Nonestab
Category :
Grade : Grade III
Size : S
682 PIVOTHP FABRIQUE HP
M/S PIVOT FABRIQUE HP, VILLAGE – DHEROWAL, PO. – MAJHOLI-174101TEHSIL – NALAGARH, DISTT. SOLAN (HP) PO MAJHOLI NALAGARH Himachal Pradesh
PIN1 : 174101
Phone No. : 200325
GSTIN : 02AAHFP2766R1ZQ 		PTLP12659D

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300 Description : SHUTTER PLATE TBRL LF NO 9911358300() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) UNIT BURST CONTROL FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
2) SCREW SPECIAL FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
3) PIN GROVED HEADED FOR HAMMER FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
4) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
5) PIN FIRING FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
6) PLUG GAS FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
7) CATCH MAGAZINE FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
8) STUD COCKING HANDLE FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
9) CHANNEL RIGHT FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
10) WHEEL LOCK FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
Category : P
Grade : I
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS() DRG NO. IQV 112 DCI NO 36853-A DTD 24.9.02 C ESTAB
2) STEEL CORE FOR AK-47 BULLET() DRG NO.VA7/PROV/009 C ESTAB
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297 Description : SHUTTER SPRING TBRL LF NO 9911358297() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 R Estab
2) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528 Description : 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528() Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/ R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]() Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/ MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PLUNGER TO DRG NO TRD 1 1 3147a L F 9911358303[99]() Specification : PLUNGER TO DRG.NO.TRD-1-1-3147 'a' C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) CAP TO DRG NO NAI J 501 4 ARD NO 2428 DT 21 11 12 Description : CAP TO DRG NO NAI J 501 4 ARD NO 2428 DT 21 11 12() Specification : CAP TO DRG. NO. NAI(J) 501/4 ARD NO. 2428, DT 21.11.12 C Estab
2) SAFETY LOCK ASSY TO DRG NO 6 042 512 TF 038 SARAT Description : SAFETY LOCK ASSY TO DRG NO 6 042 512 TF 038 SARAT() Specification : SAFETY LOCK ASSY TO DRG NO 6.042.512 (TF-038) SARAT C Estab
3) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION() Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION C Estab
4) PIN SAFETY STRIKER IQX 309 Description : PIN SAFETY STRIKER IQX 309() Specification : PIN SAFETY STRIKER TO PT. NO. IQX-309 IN FINISHED CONDITION C Estab
5) STRIKER IN F/ COND. TO DRG. NO.IQX-324 FOR FMC 605 M Description : STRIKER IN F/ COND. TO DRG. NO.IQX-324 FOR FMC 605 M() Specification : STRIKER IN FINISHED CONDITION TO DRG PT. NO IQX-324, DC 35573 A DATED 2/9/93 C Estab
Category : dp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
2) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
3) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
4) Unit Burst Control DS CAT No.1005-007791 Description : Unit Burst Control DS CAT No.1005-007791() Specification : Unit Burst Control to DS CAT No. 1005-007791 in finished condition C Estab
5) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
6) Unit auto drg .no. ARDE SK – 2825/62 / 1005-007927 for LMG 5.56mm Description : Unit auto drg .no. ARDE SK – 2825/62 / 1005-007927 for LMG 5.56mm() Specification : AS PER DRG. C Estab
7) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
8) STUD COCKING HANDLE INSAS 5.56 MM Description : STUD COCKING HANDLE INSAS 5.56 MM() Specification : ARDE/SK-3143/35 C Estab
9) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
10) Pin Grooved Headed for Hammer DS CAT NO 5315 009190 Description : Pin Grooved Headed for Hammer DS CAT NO 5315 009190() Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190 C Estab
11) REFLECTOR TO DS CAT NO. 1005-560616 Description : REFLECTOR TO DS CAT NO. 1005-560616() Specification : AS PER DRG. C Estab
12) Channel left for Carbine 5 point 56 Description : Channel left for Carbine 5 point 56() Specification : AS PER DRG. C Estab
13) CHANNEL RIGHT FOR INSAS 5.56 MM Description : CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
14) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010 C Estab
15) Stopper Front in F/D Cond. To DSCAT No. 1005-007782 Description : Stopper Front in F/D Cond. To DSCAT No. 1005-007782() Specification : AS PER DRG. C Estab
16) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
17) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR CARBINE 5 56 Description : PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR CARBINE 5 56() Specification : PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO DRG NO. ARDE/SK-2689/132 DS CAT NO. 5315-009189 DC(I) NO.26930-SA DT. 06.09.16. C Estab
18) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
19) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
20) SPRING ITEMS FOR SMALL ARMS Description : SPRING ITEMS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
21) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER() Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04 C Estab
22) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
23) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
24) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
25) PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 Description : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99() Specification : PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 C Estab
26) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
27) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 Description : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
28) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
29) PIN CATCH TRIGGER PH-7-3 Description : PIN CATCH TRIGGER PH-7-3() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION.D.A. NO. 36/08 DT. 13-05-2008 C Estab
30) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
31) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION Description : SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION() Specification : SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 C Estab
32) Plunger in Finished Condn.PH 1-24 Description : Plunger in Finished Condn.PH 1-24() Specification : As Per Drg. C Estab
33) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
34) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Description : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
35) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER Description : SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER() Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 C Estab
36) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 2
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 2
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 R Estab
2) SPACER RING DRG.NO.04-749-130222-03() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E R Estab
3) PLUNGER DRG.NO.04-44-79000-06111-4 E() Specification : DRG. NO. 04-44-79000- 06111-4 E R Estab
4) IGNITION ELEMENT04-44-79000-06105-4E() Specification : DRG.NO. 04-44-79000-06105-4E R Estab
5) STEEL INSERT FOR A 7 BULLET() Specification : STEEL INSERT (MODIFIED) FOR BULLET, DRG. NO. AFK/SK- 2556 SHEET NO. 1 DT. 8-8-2001 R Estab
6) PLUNGER GUIDE 04-44-79000-06112-4 E() Specification : DRG NO.04-44- 79000-06112-4 E R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN TRIGGER & SAFETY SEAR FOR SMALL ARMS Description : PIN TRIGGER & SAFETY SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
683 TVS - Sundaram Fasteners Ltd
98/A, VII Floor, Dr.Radhakrishnan Salai, Mylapore, Chennai. TAMIL NADU
PIN1 : 600004
Phone No. : 044 28478500
GSTIN : 33AAACS8779D1Z7 		CHEA00484B

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Water Pump Assy() SB 20-11-00-6 E Estab.
2) Modified Water Pump Assy() SB 20-11-01-9 E Estab.
3) TA in Nitriding of Cylinder liner() 303-07-22 / 20-01-50-1 C Established
Category : DP
Grade : I
Size : L
684 DYNAMIC TRANMISSION LIMITED,
Plot No.- 120, New IDC, Kutana, Rohtak Hisar Road Rohtak Haryana
PIN1 : 124001
Phone No. : 248105
GSTIN : 06AAACD4358H1ZS 		RTKD01661C

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Nose Adapter Bush() As per Drg. & Specification C Not Established
2) Base Adapter Bush() As per Drg. & Specification C Not Established
3) Machining of Cylinder() As per Drg. & Specification C Not Established
4) Bush of Base Booster Casing() As per Drg. & Specification C Not Established
5) Adapter Bush() As per Drg. & Specification C Not Established
Category : DP
Grade : II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]() Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) STEEL CORE FOR AK-47 BULLET[60]() Specification : IS : 1570 (Part-II) 1979/40C8 Or BS:970 Part-I 080-M40/709 M40 Hardness : VPN 450 - 600. Oil Blackened/Oil Dipped Drg. No. VA7/PROV/009 Note :- Weight of the Steel Core is 3.19G to 3.27G i.e. 3.23(+/-0.04)G. C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS[99]() Specification : BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Dumdum
Name Specification Use Status
1) FLEXIBLE DRIVE ADAPTER FOR TU 1111[62]() Specification : DRG NO- ARDE 2139 DET NO-57 C Nonestab
2) Flexible Drive Adopter in F C for TU TB 250 [62]() Specification : Det.12 to Drg No.ARDE-9501-03 C Nonestab
Category : dp
Grade : Grade II
Size : S
685 Power Mech Industri Private Limited
Plot No. 8,Block-A,Sector 80,Noida Block-A,Sector 80 Noida Uttar Pradesh
PIN1 : 201301
Phone No. : 9550427982
GSTIN : 09AADCP8306L1Z2 		AADCO8306L

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
2) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED]. C Nonestab
3) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
4) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
Category :
Grade : Grade III
Size : S
686 THE KAKA INDIAN FOUNDRY
NO.729, SIVAKASI TO VIRUDHUNAGAR MAIN ROAD, THIRUTHANGAL TAMIL NADU
PIN1 : 626130
Phone No. : 04562 - 230036, 9790027039
GSTIN : 33AABFT6777G1ZZ 		MRIT00853G

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) BODY DELIVERY PUMP() DRG NO. 172.46.050-1/C C Not Estab.
2) BODY OF SUCTION PUMP RH() DRG NO. 172.46.077/C C Not Estab.
3) BODY OF LH SUCTION PUMPS (CASTING)() DRG NO. 172.46.066/C C Not Estab.
Category : P
Grade : III
Size : S
687 SANDEEP METALCRAFT PVT. LTD.
D-16, MIDC INDUSTRIAL AREA NAGPUR MAHARASHTRA
PIN1 : 440028
Phone No. : 91-7104-237878, 235165
GSTIN : 27AACCS3222K1ZF 		AACCS3222K

Download 		1) Small Arms Factory
Name Specification Use Status
1) SMALL ARMS COMPONENTS REQUIRE TURNING, MILLING, DRILLING & GRINDING OPERATIONS() AS PER DRAWING C Estab.
2) PIN FIRING FOR LMG 5.56 MM() AS PER DRG. C Non Established
Category : P
Grade : II
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[70]() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Nonestab
Category : P
Grade : II
Size :
1) Small Arms Factory
Name Specification Use Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[70]() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Estab
2) TUBE MIDDLE SPRING RECOIL FOR JVPC[70]() Specification : TUBE MIDDLE SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-002-00DD C Estab
3) TUBE REAR SPRING RECOIL FOR JVPC[70]() Specification : TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-OODD C Estab
4) SILENCER JVPC 5.56MM[70]() Specification : SILENCER JVPC 5.56MM C Estab
5) Blank for Piston extension stage VI[0132089519]() Specification : BLANK FOR PISTON EXTENSION (STAGE VI) TO DRG.NO. SKJVPC 730 FOR JVPC 5.56MM. NOTE:-RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L.F.NO.0412001042. R Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SLIDE SHOE TO OFAJ DRG NO FS 2770 E Description : SLIDE SHOE TO OFAJ DRG NO FS 2770 E() Specification : SLIDE SHOE TO OFAJ DRG NO FS 2770 E C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE Description : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE() Specification : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PLUG END CLOSING ASSEMBLY FOR FLIGHT HARDWARE to ARDE DRG No 8603 02 01 01 03 000 12PA Description : PLUG END CLOSING ASSEMBLY FOR FLIGHT HARDWARE to ARDE DRG No 8603 02 01 01 03 000 12PA() Specification : PLUG END CLOSING ASSEMBLY (FOR FLIGHT HARDWARE) to ARDE DRG. No. 8603 02 01 01 03 000 12PA, MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATION NO ARDE/SPECN/PINAKA/RKT-03 LATEST ISSUE OR LATEST AMENDED DRG. AND SP C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) INSERT OGIVE REAR Description : INSERT OGIVE REAR() Specification : INSERT OGIVE REAR TO DRG.NO. SK-1555 C Estab
Category : dp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Butt Assembly Description : Butt Assembly() Specification : DSCAT No. 1005-000835 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUTT ASSY FOR CARBINE 9MM Description : BUTT ASSY FOR CARBINE 9MM() Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1 C Estab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630() Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 C Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION() Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION C Estab
Category : dp
Grade : 1
Size : M
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630() Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 C Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION() Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION C Estab
Category : dp
Grade : 1
Size : M
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630() Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 C Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION() Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION C Estab
Category : dp
Grade : 1
Size : M
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630() Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 C Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION() Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION C Estab
Category : dp
Grade : 1
Size : M
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) MAGAZINE TO ARDE DRG NO 1146 DET 2 Description : MAGAZINE TO ARDE DRG NO 1146 DET 2() Specification : MAGAZINE TO ARDE DRG NO 1146 DET 2 C Estab
2) WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000 Description : WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000() Specification : WASHER (LEATHER) TO DRG.NO.QX-207 DC 36644-A DT.10-02-2000 C Estab
3) SCREW GRUB BA STEEL TO BS 970 EN 1 A CONICAL POINTED NO 3 Description : SCREW GRUB BA STEEL TO BS 970 EN 1 A CONICAL POINTED NO 3() Specification : BS 970 EN 1 A, CONICAL POINTED NO. 3HAVING OD=0.1614 INCH/4.1MM, TPI=34.8,PITCH=0.7300MM, LENGTH=H7.62,L7.37MM C Estab
4) CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000 Description : CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000() Specification : CAP TO DRG NO.QX 197 DC 36685-A DTD.05.07.2000. C Estab
5) SCREW GRUB B A STEEL TO BS 970EN 1A FLAT POINTED NO 4 HAVING OD 0 point 1417 INCH by 3 point 6 MM TPI 38 point 5 PITCH 0 point 660 MM LENGTH H 3 point 05 Description : SCREW GRUB B A STEEL TO BS 970EN 1A FLAT POINTED NO 4 HAVING OD 0 point 1417 INCH by 3 point 6 MM TPI 38 point 5 PITCH 0 point 660 MM LENGTH H 3 point 05() Specification : SCREW GRUB B A STEEL TO BS 970EN 1A, FLAT POINTED NO.4 HAVING OD 0.1417 INCH/3.6MM, TPI 38.5 ,PITCH 0.660MM, LENGTH H 3.0 5-0.25 C Estab
6) BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D Description : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D() Specification : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D C Estab
7) INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA Description : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA() Specification : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA C Estab
8) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92 Description : BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92() Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92 C Estab
9) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917 Description : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917() Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917. C Estab
Category : ddp
Grade : 1
Size : M
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897 Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15 Description : NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15() Specification : NOZZLE TO DRG. NO. NASK-776/2/1 DATED 15-07-15. C Estab
Category : ddp
Grade : 2
Size : M
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Graphite Tube for Throat Insert as per Drg. No. SK-8738/E with Annexure "A1" & Appendix "A5" for specification, inspection parameter and acceptance criteria. Description : Graphite Tube for Throat Insert as per Drg. No. SK-8738/E with Annexure "A1" & Appendix "A5" for specification, inspection parameter and acceptance criteria.() Specification : As per Drg. No. SK-8738/E E Estab
Category : p
Grade : 2
Size : M
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56 Description : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56() Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G). C Estab
2) PISTON EXTENSION BLANK Drg. No AKC-07/01 Description : PISTON EXTENSION BLANK Drg. No AKC-07/01() Specification : AS PER DRG C Estab
3) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
4) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
5) CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM Description : CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM() Specification : CUP I.C. TO DRG NO. AKC-02/1 I.C.* FOR CARBINE 5.56MM. C Estab
6) BAYONET 1A FOR RIFLE Description : BAYONET 1A FOR RIFLE() Specification : AS PER DRAWING C Estab
7) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) HINGE COVER FOR SMALL ARMS Description : HINGE COVER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
10) BUTT ASSY FOR CARBINE 9MM Description : BUTT ASSY FOR CARBINE 9MM() Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1 C Estab
11) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM Description : PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM() Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1 C Estab
12) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. Description : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.() Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. C Estab
13) Bayonet for Carbine Machine 9MM 1A Description : Bayonet for Carbine Machine 9MM 1A() Specification : BAYONET,NO.5,MK-1/LA,DRG./DS CAT NO. 1005-000951 FOR CARBINEMACHINE 9MM 1A/1A1 DC(I) NO. 26377-SA, DT. 13.9.07 C Estab
14) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE() Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided C Estab
15) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
16) Post Aiming MG MK 3 DS CAT No 1290x000258 Description : Post Aiming MG MK 3 DS CAT No 1290x000258() Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition C Estab
17) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
18) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56() Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR) C Estab
19) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56 Description : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56() Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G). C Estab
2) PISTON EXTENSION BLANK Drg. No AKC-07/01 Description : PISTON EXTENSION BLANK Drg. No AKC-07/01() Specification : AS PER DRG C Estab
3) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
4) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
5) CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM Description : CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM() Specification : CUP I.C. TO DRG NO. AKC-02/1 I.C.* FOR CARBINE 5.56MM. C Estab
6) BAYONET 1A FOR RIFLE Description : BAYONET 1A FOR RIFLE() Specification : AS PER DRAWING C Estab
7) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) HINGE COVER FOR SMALL ARMS Description : HINGE COVER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
10) BUTT ASSY FOR CARBINE 9MM Description : BUTT ASSY FOR CARBINE 9MM() Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1 C Estab
11) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM Description : PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM() Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1 C Estab
12) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. Description : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.() Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. C Estab
13) Bayonet for Carbine Machine 9MM 1A Description : Bayonet for Carbine Machine 9MM 1A() Specification : BAYONET,NO.5,MK-1/LA,DRG./DS CAT NO. 1005-000951 FOR CARBINEMACHINE 9MM 1A/1A1 DC(I) NO. 26377-SA, DT. 13.9.07 C Estab
14) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE() Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided C Estab
15) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
16) Post Aiming MG MK 3 DS CAT No 1290x000258 Description : Post Aiming MG MK 3 DS CAT No 1290x000258() Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition C Estab
17) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
18) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56() Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR) C Estab
19) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) GENERATOR SMOKE ASSEMBLY (EMPTY) ORANGE 3A Description : GENERATOR SMOKE ASSEMBLY (EMPTY) ORANGE 3A() Specification : DRG NO. CQA(A)/AMN/2808, PART NO.IQW7 GE C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) TUBE FOR DISTANCE TUBE TO OFAJ DRG NO FS 1161D Description : TUBE FOR DISTANCE TUBE TO OFAJ DRG NO FS 1161D() Specification : TUBE FOR DISTANCE TUBE TO OFAJ DRG. NO. FS-1161D. C Estab
2) CONVERSION OF BRASS ROD TO SPECN BS 2874 1969 CZ 121 3PBTO SIZE 39 MM DIA INTO MAGAZINE SEMIFINISHED AS PEROFAJ DRG NO FS 2424 Description : CONVERSION OF BRASS ROD TO SPECN BS 2874 1969 CZ 121 3PBTO SIZE 39 MM DIA INTO MAGAZINE SEMIFINISHED AS PEROFAJ DRG NO FS 2424() Specification : CONVERSION OF BRASS ROD TO SPECN. BS:2874-1969 CZ-121 3PBTO SIZE 39 +/-0.1 MM DIA INTO MAGAZINE SEMIFINISHED AS PEROFAJ DRG. NO. FS-2424. C Estab
3) SEMI FINISHED MAGAZINE AS PER OFAJ DRG NO FS 2422A Description : SEMI FINISHED MAGAZINE AS PER OFAJ DRG NO FS 2422A() Specification : SEMI FINISHED MAGAZINE AS PER OFAJ DRG.NO. FS-2422A (UPTOTURNING OPERATION). C Estab
4) SHUTTER TO OFAJ DRG NO FS 957C Description : SHUTTER TO OFAJ DRG NO FS 957C() Specification : SHUTTER TO OFAJ DRG. NO. FS-957C. C Estab
5) TUBE BLANK TO OFAJ DRG NO FS 961 C Description : TUBE BLANK TO OFAJ DRG NO FS 961 C() Specification : TUBE BLANK TO OFAJ DRG.NO. FS-961 C C Estab
6) CONVERSION OF BRASS ROD SIZE 33 MM DIA INTO BUSH AS PER OFAJ DRG NO FS 2427 B Description : CONVERSION OF BRASS ROD SIZE 33 MM DIA INTO BUSH AS PER OFAJ DRG NO FS 2427 B() Specification : CONVERSION OF BRASS ROD TO SPECN.BS:2874-1986 GR.CZ-121 PB3TO SIZE 33 +0.075/-0.13 MM DIA INTO BUSH AS PER OFAJ DRG.NO. FS-2427 B (WITHOUT PASSIVATION). C Estab
7) CONVERSION OF BRASS ROD SIZE 31point 75 MM DIA INTO CAP BOTTOM Description : CONVERSION OF BRASS ROD SIZE 31point 75 MM DIA INTO CAP BOTTOM() Specification : CONVERSION OF BRASS ROD TO SPECN. BS:2874-1986 GRADE CZ-121PB3 TO SIZE 31.75 +0.025/-0.075 MM DIA INTO CAP (BOTTOM) SEMIFINISHED AS PER OFAJ DRG.NO. FS-2425A(WITHOUT PASSIVATION). C Estab
8) CIRCLIP TO OFAJ DRG NO FS 1942B Description : CIRCLIP TO OFAJ DRG NO FS 1942B() Specification : CIRCLIP TO OFAJ DRG. NO. FS-1942B C Estab
9) TAIL UNIT ASSEMBLY TO DRAWING NO AAIW BS 0071 Description : TAIL UNIT ASSEMBLY TO DRAWING NO AAIW BS 0071() Specification : TAIL UNIT ASSEMBLY TO DRAWING NO. AAIW/BS-0071 C Estab
10) BALANCING MASS OF 45 DEGREE AS PER OFAJ DRG NO FS 2646D Description : BALANCING MASS OF 45 DEGREE AS PER OFAJ DRG NO FS 2646D() Specification : BALANCING MASS OF 45 DEGREE AS PER OFAJ DRG NO FS 2646D C Estab
11) BLANK FOR TAIL TUBE TO OFAJ DRG NO FS 2822B Description : BLANK FOR TAIL TUBE TO OFAJ DRG NO FS 2822B() Specification : BLANK FOR TAIL TUBE TO OFAJ DRG.NO.FS-2822B C Estab
12) PACKING PIECE FOR NTT 48 DET TO DRG NO 8603 04 09 01 01 003 00 DA Description : PACKING PIECE FOR NTT 48 DET TO DRG NO 8603 04 09 01 01 003 00 DA() Specification : PACKING PIECE FOR NTT-48 DET.TO DRG.NO.8603 04 09 01 01 003 00 DA C Estab
13) JACKET TO CQA A DRG NO 3 016919 DET 16 DC 34325 A DT 11 2 88 Description : JACKET TO CQA A DRG NO 3 016919 DET 16 DC 34325 A DT 11 2 88() Specification : JACKET TO CQA(A)DRG.NO.3-016919 DET-16,DC-34325-A DT.11.2.88 C Estab
14) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917 Description : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917() Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917. C Estab
15) SCREW SSS 2 by 4 TO OFAJ DRG NO FS 2887 C Description : SCREW SSS 2 by 4 TO OFAJ DRG NO FS 2887 C() Specification : SCREW SSS 2 X 4 TO OFAJ DRG. NO. FS-2887 C C Estab
16) NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15 Description : NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15() Specification : NOZZLE TO DRG. NO. NASK-776/2/1 DATED 15-07-15. C Estab
17) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92 Description : BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92() Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92 C Estab
18) HEX SOCKET HEAD GRUB SCREW TO DRG NO NASK 1079 DATED 27 01 10 Description : HEX SOCKET HEAD GRUB SCREW TO DRG NO NASK 1079 DATED 27 01 10() Specification : HEX SOCKET HEAD GRUB SCREW TO DRG. NO. NASK 1079 DATED27-01-10 C Estab
19) SLIDE SHOE TO OFAJ DRAWING NO FS 3024 Description : SLIDE SHOE TO OFAJ DRAWING NO FS 3024() Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024 C Estab
20) CONVERSION OF STEEL ROD TO SIZE 25 point 4 MM DIA INTO SLEEVE FOR STEMMING Description : CONVERSION OF STEEL ROD TO SIZE 25 point 4 MM DIA INTO SLEEVE FOR STEMMING() Specification : CONVERSION OF STEEL ROD TO SIZE:25.4 MM DIA INTO SLEEVE FOR STEMMING (SEMI FINISHED CONDITION) TO OFAJ DRG.NO.FS-2966 C Estab
21) BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D Description : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D() Specification : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D C Estab
22) INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA Description : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA() Specification : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA C Estab
23) WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000 Description : WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000() Specification : WASHER (LEATHER) TO DRG.NO.QX-207 DC 36644-A DT.10-02-2000 C Estab
24) SCREW GRUB BA STEEL Description : SCREW GRUB BA STEEL() Specification : BS 970 EN 1 A, CONICAL POINTED NO. 3HAVING OD=0.1614 INCH/4.1MM, TPI=34.8,PITCH=0.7300MM, LENGTH=H7.62,L7.37MM C Estab
25) CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000 Description : CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000() Specification : CAP TO DRG NO.QX 197 DC 36685-A DTD.05.07.2000. C Estab
Category : ddp
Grade : 1
Size : M
688 KEC INTERNATIONAL LIMITED
RPG HOUSE 463, DR. ANNIE BESANT ROAD, WORLI MUMBAI Maharashtra
PIN1 : 400030
Phone No. : 66670200
GSTIN : 27AACCK5599H1Z2 		MUMK14211B

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Heavy Duty Cables[90]() Specification : HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E C Nonestab
Category :
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Heavy Duty Cables[90]() Specification : HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E C Nonestab
Category :
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SQ TUBE 40 x 40 x 3 mm THICK[90]() Specification : SQ Tube 40 x40 x3MM Thick specn:IS 4923 ERW for BPV SML 4X4 Vehicle ( In Multiple length of 5 to 5.5 Mtrs. ) C Nonestab
Category :
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) PLATE[90]() Specification : PLATE (BKT ON CROSS FT. MEMBER PLATE) C Nonestab
Category :
Grade : Grade III
Size : L
689 ALPRO INDUSTRIES
P.O. GANGANAGAR, DISTT. 24 PARGANAS (NORTH) KOLKATA WB
PIN1 : 700132
Phone No. : 033-2538-1622, 9830620304
GSTIN : 19AAFFA9007N1Z4 		CALA05411A

Download 		1) Small Arms Factory
Name Specification Use Status
1) GUARD HAND ASSY. FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
2) CATCH COCKING HANDLE FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
3) GUARD HAND LEFT & RIGHT FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
4) PLUNGER HOD FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
5) GROP PISTOL FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
6) CARRYING HANDLE (MOULDING) FOR INSAS 5.56 MM() AS PER DRAWING C Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Guard Hand Assy. Upper (Steel Strip) Description : Guard Hand Assy. Upper (Steel Strip)() Specification : Guard Hand Assy. Upper (Steel Strip) as per DS CAT No. 1005-560046 Note-The item will be in dark blue gray colour, Colour Code-695, to Specn. IS 5:2007 C Estab
2) GRIP PISTOL TO DS CAT NO 1005 560706 Description : GRIP PISTOL TO DS CAT NO 1005 560706() Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011. C Estab
3) CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR Description : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR() Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR C Estab
4) PLUNGER HOD ( Molding) to DS CAT NO. 4933-00770 Description : PLUNGER HOD ( Molding) to DS CAT NO. 4933-00770() Specification : AS PER DRG. C Estab
5) GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION Description : GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION() Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA , DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDITION. C Estab
6) Catch Cocking Handle Moulding Assy for LMG Description : Catch Cocking Handle Moulding Assy for LMG() Specification : CATCH COCKING HANDLE MOULDING ASSY. DRG.NO.CQA(SA)SK-1275 FOR LMG 5.56MM C Estab
7) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE Description : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE() Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775 Description : 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775() Specification : AS PER DRG. C Estab
2) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011. Description : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.() Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011. C Estab
3) CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS Description : CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION Description : GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION() Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA , DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDITION. C Estab
5) CARRYING HANDLE MOULDING (FABRICATED) FOR SMALL ARMS Description : CARRYING HANDLE MOULDING (FABRICATED) FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
6) GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET) Description : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)() Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET) C Estab
7) GRIP PISTOL Description : GRIP PISTOL() Specification : AS PER DRAWING C Estab
8) 14.PLUNGER H.O.D.(MOULDING) DRG NO:ARDE-SK3145/111 Description : 14.PLUNGER H.O.D.(MOULDING) DRG NO:ARDE-SK3145/111() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
690 SUKHDEO AGRAWAL
POST BOX NO. 43 , VIJAY NAGAR ,BALAGHAT ROAD GONDIA MAHARASHTRA
PIN1 : 441614
Phone No. : 07182-251884
GSTIN : 27AACFS9281R1Z8 		NGPS05246D

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) WAX SHELLAC AMMN.() SPECN. NO. IND/ME/164(B) R Estab.
2) BEES WAX REFINED GRADE -A() SPECN. NO. IS- 1504: 1996 R Estab.
3) SHELLAC FLAKES() SPECN. NO. JSS :- 8010-17 R Estab.
4) BEES WAX REFINED GRADE A() SPECN NO IS-1504: 1996 R Established
Category : DP
Grade : II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) APC Shellac Varnish[10]() Specification : Specn. No. JSS: 8010 -63 :2004 ( Latest Revision ) R Nonestab
Category : P
Grade : III
Size : S
691 UNITED ENGINEERING WORKS
7-2-49/A/7, OPP: BAKELITE HYLAM, SANATH NAGAR, HYDERABAD TELANGANA
PIN1 : 500018
Phone No. : 040-23705331, 23817701, 9391196988
GSTIN : 36AHAPK6408P1Z1 		AHAPK6408P

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) JACKET ASSY.() DRG.NO.2A26CB06CB C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Link for AO-18/AK-630 to Drg. no.3-AO.18.001-TY/NASK-835() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BELLEVILLE SPRING DRG. NO.AK-630.120-4[72]() Specification : AS PER DRG.& SPECIFICATION R Estab
Category : P
Grade : I
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) U-BLOCK SIZE 95X135X165 ST-42-IS-1079[90]() Specification : SIZE 95X135X165 ST-42-IS-1079 R Nonestab
2) FORGING FOR PIVOT FOR TURRET ASSY.[90]() Specification : FORGING FOR PIVOT FOR TURRET ASSY. C Estab
3) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A C Nonestab
4) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL[90]() Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL R Nonestab
5) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL[90]() Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL R Nonestab
6) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL[90]() Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL R Nonestab
7) CASTING FOR COMMANDER RING[90]() Specification : CASTING FOR COMMANDER RING C Estab
8) SLEEVE[90]() Specification : SLEEVE C Nonestab
9) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
13) BOSS IS 9550[90]() Specification : BOSS M10X15LX180D IS:9550 C Nonestab
14) Shaft 42 CR 4 MO 2 oblique TO[90]() Specification : Shaft 42 CR 4 MO 2/TO Drg No. 765-58-222/A C Nonestab
15) BRIGHT BAR 55 DIA X 35 LENGTH IS 2073[90]() Specification : BRIGHT BAR SIZE 55 DIA X 35 LENGTH IS:2073 (DRG. NO. 645-01-7321-1/C FOR FINISH COMPONENT) R Nonestab
16) M S BLOCK 65X173X185[90]() Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A R Nonestab
17) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
18) STRUT[90]() Specification : STRUT DRG. NO. 765-50-1676/A C Nonestab
19) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Nonestab
20) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Nonestab
21) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
22) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
23) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
24) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Nonestab
25) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Nonestab
26) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Nonestab
27) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES Description : ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Estab
2) THREADED BOSS M12X 1 point 75 X OD 20X60 MM Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]() Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) GUARD TO DESIG AK 630 ASSY 102 4 Description : GUARD TO DESIG AK 630 ASSY 102 4() Specification : GUARD TO DESIG AK-630 ASSY 102-4 C Estab
2) GASKET TO DRG No AK 630 106 14 IN FINISHED CONDITION Description : GASKET TO DRG No AK 630 106 14 IN FINISHED CONDITION() Specification : GASKET TO DRG. No. AK-630 106-14 IN FINISHED CONDITION C Estab
3) SCREW TO DRG No M4 6GX6 point 33 H 026 IN FINISHED CONDITION Description : SCREW TO DRG No M4 6GX6 point 33 H 026 IN FINISHED CONDITION() Specification : SCREW TO DRG. No. M4-6GX6.33 H 026 IN FINISHED CONDITION C Estab
4) PIN TO DRG No 8PR22AX25 40XK38 5 45 HRC CHEM Description : PIN TO DRG No 8PR22AX25 40XK38 5 45 HRC CHEM() Specification : PIN TO DRG. No. PIN 8PR22AX25.40XK38.5 45 HRC CHEM C Estab
5) PIN TO DRG No PIN 4PR22AX10 40XK38 5 45 5 HRC CHEM Description : PIN TO DRG No PIN 4PR22AX10 40XK38 5 45 5 HRC CHEM() Specification : PIN TO DRG. No. PIN 4PR22AX10.40XK38.5 45.5 HRC CHEM C Estab
6) PIN TO DRG No 9 A 621 05 017 Description : PIN TO DRG No 9 A 621 05 017() Specification : PIN TO DRG. No. 9-A-621.05.017 C Estab
7) HOOK TO DRG No 9 1 621 033 IN FINISHED CONDITION Description : HOOK TO DRG No 9 1 621 033 IN FINISHED CONDITION() Specification : HOOK TO DRG. No. 9-1-621.033 IN FINISHED CONDITION C Estab
8) BALL 10 319 20 TO SPECN GOST 3722 81 Description : BALL 10 319 20 TO SPECN GOST 3722 81() Specification : BALL 10.319-20 TO SPECN GOST 3722-81 C Estab
9) BALL TO DRG No BALL 10 319 40 IN FINISHED CONDITION Description : BALL TO DRG No BALL 10 319 40 IN FINISHED CONDITION() Specification : BALL TO DRG. No. BALL 10.319-40 IN FINISHED CONDITION C Estab
10) WASHER REF DRG No AK 630 111 7 Description : WASHER REF DRG No AK 630 111 7() Specification : WASHER REF. DRG No. AK-630 111-7 C Estab
11) CLAMP Description : CLAMP() Specification : CLAMP C Estab
12) WASHER A6 X1 POINT5 25 POINT 029 GOST 11371 78 Description : WASHER A6 X1 POINT5 25 POINT 029 GOST 11371 78() Specification : WASHER A6X1.5.25.029, GOST : 11371-78 C Estab
13) BOLT M8 8GX25 109 40CR 029 GOST 7798 70 Description : BOLT M8 8GX25 109 40CR 029 GOST 7798 70() Specification : BOLT M8-8GX25.109.40CR.029 GOST 7798-70 C Estab
14) BUSH AK 630 101 24 STEEL 5 GOST 1050 88 Description : BUSH AK 630 101 24 STEEL 5 GOST 1050 88() Specification : BUSH (AK-630.101.24) STEEL-5, GOST : 1050-88 C Estab
15) BOLT 3M6 8GX16 109 40CR POINT 029 GOST 7805 70 Description : BOLT 3M6 8GX16 109 40CR POINT 029 GOST 7805 70() Specification : BOLT 3M6-8GX16.109.40CR.029 GOST 7805-70 C Estab
16) PIN 6PR Description : PIN 6PR() Specification : PIN 6PR. 22A X 45.40 X K38.5.45.5 HRC PHOS. OIL. OST3 C Estab
17) BOLT M8 8G X 45 POINT 109 POINT 40 X 029 GOST 7796 70 Description : BOLT M8 8G X 45 POINT 109 POINT 40 X 029 GOST 7796 70() Specification : BOLT M8-8GX45.109.40X029 GOST 7796-70 C Estab
18) BOLT M6 8g X 20 Description : BOLT M6 8g X 20() Specification : BOLT M6-8gX20.109.40X.029 GOST 7805-70 C Estab
19) SCREW VM4 6GX30 109 40X 029 GOST 17475 80 Description : SCREW VM4 6GX30 109 40X 029 GOST 17475 80() Specification : SCREW VM4-6GX30.109.40X.029 GOST : 17475-80 C Estab
20) BOLT POINT 3M8 8g Description : BOLT POINT 3M8 8g() Specification : BOLT .3M8-8gX14.109.40X.029 GOST 7798-70 C Estab
21) BOLT M8 8g X 20 Description : BOLT M8 8g X 20() Specification : BOLT M8-8gX20.109.40X.029 GOST 7798-70 C Estab
22) WIRE 1 T 12 X 18 HIOT Description : WIRE 1 T 12 X 18 HIOT() Specification : WIRE TO DRG. No. WIRE 1-T-12X18H10T IN FINISHED CONDITION GOST 18143-72 C Estab
23) RING V8 GOST 13942 86 Description : RING V8 GOST 13942 86() Specification : RING V8, GOST : 13942 - 86 C Estab
24) STUD GOST 22038 Description : STUD GOST 22038() Specification : STUD. M5-6G X 30.109.40 X .029, GOST : 22038 - 76 C Estab
25) CLAMP TO DRG No AK 630 119 8 IN FINISHED CONDITION Description : CLAMP TO DRG No AK 630 119 8 IN FINISHED CONDITION() Specification : CLAMP TO DRG No. AK-630 119 - 8 IN FINISHED CONDITION C Estab
26) INSERT TO DRG NO AK 630 101 23 IN FINISHED CONDITION Description : INSERT TO DRG NO AK 630 101 23 IN FINISHED CONDITION() Specification : INSERT TO DRG. NO. AK-630 101-23 IN FINISHED CONDITION C Estab
27) SCREW MS 6GX8 33N 40KH 026 GOST 1478 93 GRADE EN19 Description : SCREW MS 6GX8 33N 40KH 026 GOST 1478 93 GRADE EN19() Specification : SCREW MS-6GX8.33N.40KH.026 GOST : 1478-93 GRADE EN19 C Estab
28) WIRE TO SPECN 1 T 12 X 18H410T IS 6528 95 GRADE 4C Description : WIRE TO SPECN 1 T 12 X 18H410T IS 6528 95 GRADE 4C() Specification : WIRE TO SPECN. 1-T 12 X 18H410T, IS : 6528 - 95 GRADE 4C C Estab
29) LOCK SOCKET TO DRG No AK 630 101 51 IN FINISHED CONDITION Description : LOCK SOCKET TO DRG No AK 630 101 51 IN FINISHED CONDITION() Specification : LOCK/SOCKET TO DRG. No. AK-630 101 - 51 IN FINISHED CONDITION C Estab
30) BELLEVILLE SPRING DRG NO AK 630 120 4 Description : BELLEVILLE SPRING DRG NO AK 630 120 4() Specification : AS PER DRG C Estab
Category : dp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BOLT M8 8g X 20 Description : BOLT M8 8g X 20() Specification : BOLT M8-8gX20.109.40X.029 GOST 7798-70 C Estab
Category : dp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB Description : BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB() Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB C Estab
2) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE Description : SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE() Specification : SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659 C Estab
3) PIN KEEP SPLIT FOR FIRING DEVICE Description : PIN KEEP SPLIT FOR FIRING DEVICE() Specification : PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662). C Estab
4) WASHER LOCK STEEL SHAKE PROOF ZINC COATED FOR FIRING DEVICE Description : WASHER LOCK STEEL SHAKE PROOF ZINC COATED FOR FIRING DEVICE() Specification : WASHER LOCK STEEL, SHAKE PROOF, ZINC COATED, INTERNAL TYPE 12,3.18 (CAT. NO.GI/GA 13715). C Estab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) WASHER SIZE A6X1 POINT 5 25 029 Description : WASHER SIZE A6X1 POINT 5 25 029() Specification : WASHER SIZE A6X1.5.25.029 C Estab
Category : dp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) WASHER SIZE A6X1 POINT 5 25 029 Description : WASHER SIZE A6X1 POINT 5 25 029() Specification : WASHER SIZE A6X1.5.25.029 C Estab
Category : dp
Grade : 3
Size : S
692 Jindal Industries
Village Rampur Jattan, Nahan Road Kala Amb Kala Amb Himachal Pradesh
PIN1 : 173030
Phone No. : 9023434757
GSTIN : 02AALFJ0672Q1Z1 		PTLJ12499E

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) SURFACE MACHINING OF STEEL BLANKS AS PER DRG. NO. SC/30/MISC-1. DATED 03-01-97 SCOPE OF WORK ATTATCHED.[94]() Specification : SURFACE MACHINING OF STEEL BLANKS AS PER DRG. NO. SC/30/MISC-1. DATED 03-01-97 SCOPE OF WORK ATTATCHED. R Nonestab
Category :
Grade : Grade III
Size : S
1) Metal and Steel Factory
Name Specification Use Status
1) MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.[94]() Specification : MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED. R Nonestab
Category :
Grade : Grade III
Size :
1) Gun Carriage Factory
Name Specification Use Status
1) SHAFT IFL-7962 TO DRG. NO. IFL-7962[90]() Specification : SHAFT IFL-7962 TO DRG. NO. IFL-7962 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SHAFT IFL 7962 TO DRG NO IFL 7962[90]() Specification : SHAFT IFL 7962 TO DRG NO IFL 7962 C Nonestab
Category :
Grade : Grade III
Size : S
693 AKSHAY PAPER INDUSTRIES
SURVEY NO 21 , BAGGI , KARANJA LAD BAGGI ROAD KARANJA LAD Maharashtra
PIN1 : 444105
Phone No. : 7276127569
GSTIN : 27AAHFA2550J1ZJ 		AAHFA2550J

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BOARD GLAZED 914X304X.508MM THICK[14]() Specification : JSS 8135-13:2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MILL BOARD AMMN 762X1016X2.50 MM[14]() Specification : JSS 9310-01:2014 R Nonestab
2) MILL BOARD 787.4X558.8X2.5MM THICK[14]() Specification : JSS:9310-01:2014 R Nonestab
3) MILL BOARD AMMN 787.4 MM X 558.8 MM X 1.25 MM[14]() Specification : JSS 9310-01:2014 R Nonestab
4) STRAW BOARD77.50X65.00CMX2.54MM TH[14]() Specification : IS 2617-1967 R Nonestab
5) MILL BOARD 787X1041X1.25MM THICK[14]() Specification : JSS 9310-01-2014 R Nonestab
6) MILL BOARD AMMN STRIPS 1000X95X3.4MMTHICK[14]() Specification : IS-2617-2006 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1421014629 MILL BOARD SIZE 787MM X 559MM X 6MM[14]() Specification : JSS 9310-01:2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1421233128 MILL BOARD CUP[14]() Specification : JSS 9310-01:2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1422006617 GLAZED BOARD 1.00 X 700 X 525 MM[14]() Specification : SPECN.NO. JSS 8135-13-2007 (REV.NO.2) R Nonestab
2) 1422000028 GLAZED BOARD[14]() Specification : JSS 8135-13:2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1421006729 MILL BOARD 787 X 559 MM[14]() Specification : JSS 9310-01: 2007 R Nonestab
2) 1421203828 MILL BOARD 787 X 559 MM[14]() Specification : JSS 9310-01:2007 R Nonestab
3) 1421014628 MILL BOARD[14]() Specification : JSS 9310-01:2007 R Nonestab
4) 1421278793 MILL BOARD SZ 787[14]() Specification : JSS 9310-01:2007 R Nonestab
5) 1422000019 BOARD GLAZED CALENDERED AMMUINITION[14]() Specification : JSS 8135-13:2007 R Nonestab
6) 1420215823 GLAZED BOARD 525 mm[14]() Specification : JSS 8135-13:2007 R Nonestab
7) 1421203628 MILL BOARD 559 MM CUP[14]() Specification : JSS 9310-01:2007 R Nonestab
8) 1421060045 MILL BOARD[14]() Specification : JSS 9310 - 01 : 2007 R Nonestab
9) 1421006728 MILL BOARD[14]() Specification : JSS 9310-01: 2007 R Nonestab
10) 1421204045 MILL BOARD GEN[14]() Specification : JSS 9310-01: 2007 R Nonestab
11) 1421203128 MILL BOARD GEN[14]() Specification : JSS 9310-01: 2007 R Nonestab
12) 1422005117 GLAZED BOARD 2 X 630 X 420 MM[14]() Specification : JSS-8135-13:2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1421962011 PULP BOARD WHITE[14]() Specification : PULP BOARD WHITE COLOURED, SIZE 710 +/- 5 MM X 560 +/- 5 MM X 0.25 +/- 0.025 MM GSM- 200 TO 210, SPECN. IS: 4664-1986(FIRST REVISION) (REAFF. 2000) R Nonestab
2) 1422000020 GLAZED BOARD[14]() Specification : GLAZED BOARD CALENDERED AMMUNITION TO SPECN. JSS 8135 -13 DC3554-ME SIZE 700 X 500 X 0.20 MM SUBSTANCE :- 250 +- 25 GSM. R Nonestab
3) 1422005228 GLAZED BOARD[14]() Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1421203630 MILL BOARD[14]() Specification : MILL BOARD TO SPECN.JSS 9310-01: 1994 DC 3279-ME DT.21.02.95 (REVISION NO.-1)SIZE - 787 X 559 X 2.00 MM +- 0.30 MM THICK.MASS - 2100 +- 315 GSM. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1418617416 PAPER BOARD CORRUGATED AMMUNITION DOUBLE FACED FINE FLUTE TO SPECN NO JSS 8135 08 2008 REV NO 3 CONFIRMING TO STD SIZE 787 MM X 559 MM X 5 MM THICK[14]() Specification : PAPER & BOARD CORRUGATED AMMUNITION DOUBLE FACED FINE FLUTE TO SPECN NO. JSS:8135-08:2008 (REV. NO.3)CONFIRMING TO STD SIZE- 787 MM X 559 MM X 5 MM THICK. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOARD GLAZED CALENDERED AMMN 787 X 558 X 1.25 MM THICK[14]() Specification : JSS 8135-13:1998 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOARD GLAZED CALENDERED AMMN 787 X 558 X 1.25 MM THICK[14]() Specification : JSS 8135-13:1998 R Nonestab
2) MILL BOARD 787MM X 558MM X 5MM THICK[14]() Specification : JSS-9310-01:2007 R Nonestab
3) MILL BOARD SIZE : 1016 X 762 X 2.5MM +/- 0.35MM[14]() Specification : JSS-9310-01-2007 R Nonestab
4) MILL BOARD SIZE 787 MM X 559MM X 1.25 MM THICK[10]() Specification : JSS 8135-13: 2007 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) MILL BOARD AMMN[14]() Specification : SPECN.JSS : 9310-01-2014 (REV.NO.3) DS-CAT-NO-9310-000001. DC NO.5290 ME - 16/12/2014. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) MILL BOARD TO SPECN JSS[14]() Specification : SPECN. JSS-9310-01:2014 (REV. NO.3)DS CAT NO.9 310-000001. DC NO.5290-ME DTD.16/12/14 SIZE : 1 MTR X 1/2MTR X 1.4 MM + 0.0, -0.3MM THICK. P Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PAPER CORR.SING 787X558X3 MM THICK[14]() Specification : JSS 8135-08-2014 R Nonestab
2) CORRUGATED PAPER SHEET 690 MM X 672 MM X 3 MM THICK[14]() Specification : JSS: 8135-08:2014 R Nonestab
3) PAPER KRAFT AMMN 482X635MM,125 GSM.[14]() Specification : JSS : 8135-017:2002 R Nonestab
4) PAPER PRNTG CREAM 69X86CMX60 GSM[14]() Specification : IS:1848:2007 R Nonestab
5) PAPER FOR CARTG. CASES AMMUNITION[14]() Specification : JSS:8135-09:2004 R Nonestab
6) PAPER TISSUE 508X762X0.0279MM THICK[14]() Specification : JSS 8135-14:2010 R Nonestab
7) CARTON FOR 12 BORE PAPER 2.1/2[99]() Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTON BOARD 787.4X558.8X0.508MM[14]() Specification : JSS 8135-15 :2010 R Nonestab
2) BOARD CARTON 870 X 620 X 0.508 MM[14]() Specification : JSS 8135-15 : 2010 R Nonestab
3) CARTON BOARD787.4X1117.4X0.762 MM[14]() Specification : JSS :8135-15:2016 R Nonestab
4) BOARD CARTON1SIDE WHITE31X44X.03[14]() Specification : JSS:8135-15:2016 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MILL BOARD DISC DIA 125 X 2.0 TH[21]() Specification : JSS:-9310-01:1994 Rev. No.1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOARD CORR 787.4 X558.4 X 6 MM THIC[14]() Specification : JSS :8135 - 08-2008 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1410018278 PAPER LAMINATED GR III 127 MM WIDE[14]() Specification : SPECN NO. IND/ME/786(D):2013 R Nonestab
2) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN[14]() Specification : SPECN. NO. JSS-8135-05 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE[14]() Specification : JSS:8135-09: 2004 R Nonestab
2) 1418940031 PAPER LAMINATED GR I 914 MM WIDE[14]() Specification : IND/ME/786(D):2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1410016984 PAPER LAMINATED GR III 914 MM WIDE[14]() Specification : SPECN. NO. IND/ME/786 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM[14]() Specification : SPECN. NO. JSS 8135-017 R Nonestab
2) 1410016990 PAPER LAMINATED GR III 102 MM WIDE[14]() Specification : SPECN. NO. IND/ME/786 R Nonestab
3) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5[14]() Specification : SPECN. NO. JSS 8135-09 R Nonestab
4) 1415837116 PAPER HAND MADE 508 X 381 X 0.18 MM[14]() Specification : SPECN. IS: 3064-1986 (FIRST REVI- SION) (AMENDMENT -1) REAFFIRMED -1999. R Nonestab
5) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.[14]() Specification : SPECN. JSS - 9310-06 : 2002 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG[14]() Specification : JSS 9310- 03: 2010 R Nonestab
2) 1419828815 PAPER WHITE FINE[14]() Specification : JSS 9310-06: 2002 R Nonestab
3) 1410018984 PAPER LAMINATED GR II 914 MM WIDE[14]() Specification : IND/ME/786(D):2013 DC R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1419790003 PAPER BLACK GLAZED[14]() Specification : PAPER BLACK GLAZED SIZE - 33.65 CM X 41.27 CM, 60 GSM R Nonestab
2) 1416803426 PAPER MANILA[14]() Specification : PAPER MANILA. SIZE - 57 CM X 74 CM. - 50 GSM. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1417910415 PAPER TISSUE 508 MM[14]() Specification : PAPER TISSUE (GRASS BLEACHED) TO SPECN. JSS 8135 - 14 -:2000REVISION NO. 1 DC NO. 3625 - ME DT. 03-07-2000. SIZE - 508 X762 X 0.0279 MM +- 0.002 MM THICK SUBSTANCE - 18 +- 0.75 GSM R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1418020075 PAPER NATURAL BROWN COLOR OF 990MM[14]() Specification : PAPER NATURAL BROWN COLOR OF 990MM WIDTH FOR CARTRIDGE CASEAMMN.TO SPECN.NO.JSS 8135-09:2004 (REV-2)(REAFFIRMED 2011)DC NO.5065-ME DT.10-01-2012. R Nonestab
Category :
Grade : Grade III
Size : S
1) Cordite Factory Arvankadu
Name Specification Use Status
1) PAPER WRAPPING WAXED KRAFT[14]() Specification : PAPER WRAPPING WAXED KRAFT AMMUNITION-1118mm X 182.88 m SPECN:JSS 8135-05:2017 REVISION NO.5 P Nonestab
2) UNVARNISHED HOLLOW PAPER TUBE[25]() Specification : UNVARNISHED HOLLOW PAPER TUBE SIZE 800 MM LONG X 28 MM PLUS OR MINUS 1MM INTERNAL DIA,BOTH ENDS OPEN SPECN:CF 12.5 DT.17.1.95 WITH CORRECTION SLIP 12.5.1&12.5.2 CFA SKETCH NO.765 DATED. 2.12.88. P Nonestab
3) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMUNITION 48.2CM X 63.4CM SUBSTANCE 125 PLUS OR MINUS 5 GSM SPECN: JSS 8135-017:2016 REV.No.1 DC 5493-ME DT 24-09-2016 P Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM [14]() Specification : JSS:8135-13:2014 REV-3 DC.NO.5257 ME DTD.18.06.14. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) BOARD GLAZED CALENDERED AMMUNITION TO SPECN: JSS: 8135-13:1998[14]() Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN: JSS: 8135-13:1998,DC-3554-ME,DT.12.03.1999. SIZE:-700 x 525 x 0.64 +/- 0.13 MM. C Nonestab
2) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014[61]() Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER CORRUGATED AMMUNITION[14]() Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - R Nonestab
2) PAPER WRAPPING WAXED CRAFT AMMUN[14]() Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG. R Nonestab
3) PAPER WHITE FINE AMMUN[14]() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Nonestab
4) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - R Nonestab
2) PAPER WRAPPING WAXED CRAFT AMMUN[14]() Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG. R Nonestab
3) PAPER WHITE FINE AMMUN[14]() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Nonestab
4) PAPER CORRUGATED AMMUNITION[14]() Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4. R Nonestab
5) CONTAINER ROLLED PAPER LAMINATED WP[14]() Specification : DRG. NO. ARDE/1953 DET NO.1 (ARDE 1953 DET NO.1,ISV 376A,ISV-1149,ISV-1144,ISV-1148,ISV-1145,ISV-1146 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) MILL BOARD 800 x 550 x 2 5 MM TH LF 1421203628 Description : MILL BOARD 800 x 550 x 2 5 MM TH LF 1421203628() Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA C Nonestab
2) MILL BOARD 600 X 750 X 2MM LF 1421203629 Description : MILL BOARD 600 X 750 X 2MM LF 1421203629() Specification : CARD BOARD/MILL BOARD TO SPECIFICATION JSS9310-01-2007 REV 2 SIZE 600 X 750MM X 2MM THICK C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) MILL BOARD 800 x 550 x 2 5 MM TH LF 1421203628[14]() Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA C Nonestab
2) MILL BOARD 787 4X558 8X1 25MM THICK LF 1421203771[14]() Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515 Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515() Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011. C Nonestab
2) GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822 Description : GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822() Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3 C Nonestab
3) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313 Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313() Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16 C Nonestab
4) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178 Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178() Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014. C Nonestab
5) PAPER BOARD CORRUGATED LF 1411817752 Description : PAPER BOARD CORRUGATED LF 1411817752() Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK. C Nonestab
6) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676 Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676() Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014. C Nonestab
Category : p
Grade : 3
Size : S
1) High Explosive Factory
Name Specification Use Status
1) Paper Wrapping Wax Craft Ammn[10]() Specification : JSS: 8135-05: 2017 (Rev 5) DC No 5186-ME Dt 19/03/2017. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - R Nonestab
2) PAPER WRAPPING WAXED CRAFT AMMUN[14]() Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG. R Nonestab
3) PAPER WHITE FINE AMMUN[14]() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Nonestab
4) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
5) PAPER CORRUGATED AMMUNITION[14]() Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Piece Packing Mill Board[25]() Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0. R Nonestab
2) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Piece Packing Mill Board[25]() Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0. R Nonestab
2) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Piece Packing Mill Board[25]() Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0. R Nonestab
2) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Piece Packing Mill Board[25]() Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0. R Nonestab
2) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PAPER OIL VARNISHED SYNTHE TIC RESIN TYPE DOUBLE SIDED[14]() Specification : .JSS 8135 - 18:2021 DC NO.6027-ME DT. 01-06 -202 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMUNITION TO SPECN. NO. JSS 8135-017:2016 (REV-I) SIZE 483X635 MM, SUSTENANCE, GRAM PER SQUARE METER 125+_ 5 DS CAT NO. 8135-000349. P Nonestab
Category :
Grade : Grade III
Size : S
694 P. CHANDRU MACHINE TOOLS,
SF No: 273/2C, Katpadi to Gudiyattam Road, Pillandipattu Village, Vaduganthangal PO, Katpadi Taluk, Tamil Nadu
PIN1 : 632204
Phone No. : 246117
GSTIN : 33AARFP0068J1Z0 		CHEP12168C

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Tail Cone Assyembly-RTU 2231() As per Drg. & Specification C Not Established
2) Closing Disc Assyembly() As per Drg. & Specification C Not Established
3) Anchoring Mechanism() As per Drg. & Specification C Not Established
Category : DP
Grade : II
Size : S
695 The Time Engineers
Industrial Estate, Mul Road Chandrapur Maharashtra
PIN1 : 442401
Phone No. : 251288
GSTIN : 27ABVPJ9087G1ZU 		ABVPJ9087G

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6334402000 MS BLOCK FOR PROFING HDC I AND II[63]() Specification : M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030123 ERA MOUNTING PLATE ASSY STD[01]() Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES C Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]() Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM[01]() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0134071133 SHEET M S 2500[01]() Specification : IS:513-1994 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0120002100 SHEET STEEL SIZE 2 MM THICK[01]() Specification : SHEET STEEL, SIZE :-1830 MM LONG X 915 M WIDE X 2 MM THICKTO SPECN IS:513-1994 GRADE D. R Nonestab
2) 0133021020 SHEET M S[01]() Specification : SHEET MILD STEEL,SIZE: 2 MM THICK X 1830 MM LONG X 915 WIDE.IS - 1079-1994,GRADE "O" R Nonestab
3) 0133021025 SHEET STEEL[01]() Specification : SHEET STEEL,SIZE 3000 MM LONG X 1000 MM WIDE X 2.5 MM THICKTO SPECN.IS: 513 -1994, GRADE "D" R Nonestab
4) 0134071134 SHEET STEEL SIZE[01]() Specification : SHEET STEEL SIZE 1830 MM LONG X 915 MM WIDE X 1.6 MM THICKTO SPECN IS 513 1986 GRADE D R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133010400 WIRE MILD STEEL 4MM DIA[01]() Specification : WIRE MILD STEEL 4MM DIAIS 280 1978 R Nonestab
2) 0133040005 WIRE STEEL SIZE 5 MM DIA[01]() Specification : WIRE STEEL SIZE 5 MM DIA, HALF HARD, ANNEALED FINISH TOSPECN IS 280-1978 (REAFFIRMED - 1992) R Nonestab
3) 0133030112 MS PLATE SIZE 1100[01]() Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE) R Nonestab
4) 0133030115 MS PLATE SIZE 400[01]() Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE) R Nonestab
5) 0133030113 MS PLATE SIZE 450 MM[01]() Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE) R Nonestab
6) 0133030120 MS ROD SIZE 50MM DIA 100MM LENGTH[01]() Specification : MS ROD OF SIZE 50MM DIA X 100MM LENGTH (IS-2062-1994 OF ANYGRADE) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030151 MILD STEEL PLATE AS PER SPECN NO BS970 GREN3[01]() Specification : MILD STEEL PLATE SIZE 1830X 1830 X 25 MM THICK AS PER SPECN. NO. BS970 GREN3 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6333501102 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236 R Nonestab
2) 6333501101 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 C Nonestab
2) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
3) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
696 Eswar Engineers
No.7/1A. Madurai Road, Crawford Trichy Tamil Nadu
PIN1 : 620012
Phone No. : 2472570
GSTIN : 33AALPM4555F1ZP 		AALPM4555F

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6192547763 PROTECTING COVER DRG NOS NASK 776 9 2 PROVISIONAL[61]() Specification : PROTECTING COVER DRG. NOS NASK 776/9/2 (PROVISIONAL) DT.26-11-19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) THIRD LEFT HAND SHIELD ASSY TO 6201004019[62]() Specification : THIRD LEFT HAND SHIELD ASSY TO DRG NO. 184.04.016CBCB C Nonestab
2) THIRD RIGHT HAND SHIELD ASSY TO 6201004020[62]() Specification : THIRD RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.017CBCB C Nonestab
3) 2ND LEFT HAND SHIELD ASSY TO 6201004037[62]() Specification : 2ND LEFT HAND SHIELD ASSY TO DRG NO. 184.04.048CB-1CB C Nonestab
4) 2ND RIGHT HAND SHIELD ASSY TO 6201004038[62]() Specification : 2ND RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.049CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
697 VIMAL PAINTS PVT. LTD.
PLOT NO.C-18/4 MIDC HINGNA INDUSTRIAL ESTATE HINGNA NAGPUR Maharashtra
PIN1 : 440028
Phone No. : 237610
GSTIN : 27AABCV4597P1ZF 		NGP0012345

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1011518001 PAINT BLACK MATT FINISH SPRAYING[10]() Specification : SPECN. IS:168-1993 (THIRD REVISION) REAFFIRMED-2002 (AS APPLICABLE FOR DEFENCE USE) R Estab
2) 1003109503 APC 102 RD1064 SPECN JSS8030 25 09[10]() Specification : JSS 8030-25: 2009 R Nonestab
3) 1003100803 APC 2 TO JSS 8030 14 2009[10]() Specification : JSS-8030-14:2009 R Nonestab
4) 1003110513 APC11 CEMENT RD1154 JSS 8030 24 03[10]() Specification : JSS 8030-24:2003 R Nonestab
5) 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874[10]() Specification : IS:1874:1992 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1013400174 APC 217 TO SPCN.JSS-8010-42-2009[10]() Specification : SPECN.NO. JSS 8010-42 R Nonestab
2) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168[10]() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) R Nonestab
3) 1011001001 PAINT BLACK ACID PROOF SPRAYING[10]() Specification : SPECIFICATION IND/ME/651(A) R Estab
4) 1011312220 PAINT OLIVE GREEN MATT FINISH[10]() Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION R Nonestab
5) 1011312446 PAINT RED OXIDE MATT FINISH GEN PUR[10]() Specification : ISC 446 OF IS: 5- 1994 (FOURTH REVISION) (AMDT-1) TO SPECN IS: 168-1993 (THIRD REVISION) R Estab
6) 1013401025 APC NO.219 DYED RHOD BASE JSS-8010[10]() Specification : SPECIFICATION NO.JSS-8010-48:2004, REV. NO.1. R Nonestab
7) 1013401035 VARNISH AIR DRYING AMMN IND/ME/719[10]() Specification : SPECIFICATION NO.IND/ME/719 (D) R Nonestab
8) 1011337012 PAINT WHITE MARKING STENCILING SGF[10]() Specification : IS: 138- 1992 R Nonestab
9) 1011535537 PAINT STENC RED SIGNAL IS 138 1992[10]() Specification : IS: 138 -1992 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1003468015 APC 7 LUTING MK 6 RD 1178[10]() Specification : JSS 8030-19:2003 Revision No- 1 R Nonestab
2) 1003110514 APC 213 RD 1177 BLUE[10]() Specification : JSS 8010-41 :2006 R Nonestab
3) 1003010223 APC 223 TO JSS 8010 63 2004 REV 2[10]() Specification : JSS 8010-63:2004 FOR FUZE B-429 ASSY. R Nonestab
4) 1011318631 PAINT LIGHT GREY MATT FINISH GEN PU[10]() Specification : IS-168:1993 R Nonestab
5) 1003103907 APC 6 TO JSS 8040 12[10]() Specification : JSS-8040-12 : 2005 R Nonestab
6) 1013401157 APC 103 VAR RD 1198 B IND ME 368 C[10]() Specification : IND/ME/368 (C) R Nonestab
7) 1013401020 APC 219 UNDYED[10]() Specification : JSS 8010-48 : 2004 R Nonestab
8) 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992[10]() Specification : IS-138-1992 R Nonestab
9) 1011337001 PAINT STENC BLACK SGF IS 138 1992[10]() Specification : SPECN IS-138-1992 R Nonestab
10) 1003110104 APC 104 RD 1198 D[10]() Specification : JSS 8010-45:2004 R Nonestab
11) 1010801150 APC 210 UNDYED[10]() Specification : JSS-8010-64:2009 R Nonestab
12) 1013301074 LACQUER CLEAR NITROCELLULOSE TO SPE[10]() Specification : JSS-8010-42 : 1999 R Nonestab
13) 1010501115 DYE RHODAMINE B BASE TO JSS 103[10]() Specification : JSS 6820-03: 2009 R Nonestab
14) 1011308001 PAINT BLACK SGF GENERAL PURPOSE[10]() Specification : IS:168-1993 R Nonestab
15) 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF[10]() Specification : IS: 168-1993 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1003110518 APC 225 (VARNISH 30%) JSS-8010-63[10]() Specification : SPECN. NO. JSS-8010-63 R Estab
2) 1003103000 APC-5 (CEMENT RD1286), JSS 8030-20:09[10]() Specification : SPECIFICATION NO. JSS 8030-20:2009 (REVISION NO.3) R Nonestab
3) 1003110012 APC 12 (GREASE AMMN.) JSS-9150-45:93[10]() Specification : SPECIFICATION NUMBER JSS:9150- 45 : 2006 (REVISION NUMBER 2) R Nonestab
4) 1003110515 APC-213 (RD 1177 ORANGE )[10]() Specification : SPECN. NO. JSS 8010-41: 2006, REVISION NO.3 R Nonestab
5) 1003110517 APC NO 224[10]() Specification : JSS-8010-63: 2004 R Nonestab
Category : p
Grade : Grade III
Size : S
698 CLAIROFILT INDIA
G3 Ground Floor Sini Arcade Old agra Road, Kasheli Bhiwandi Maharashtra
PIN1 : 421302
Phone No. : 25422279
GSTIN : 27BIFPK3192R1ZK 		BIFPK3192R

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) silver nitrate LF 1001713302[10]() Specification : SILVER NITRATE AR GRADE 99.9% E Nonestab
Category :
Grade : Grade III
Size : S
699 MADRAS RADIATORS AND PRESSING LIMITED
S.F. NO.293, POLLACHI MAIN ROAD, MALUMACHAMPATTI, COIMBATORE TAMILNADU
PIN1 : 641050
Phone No. : 0422-6453584, 6453586
GSTIN : 33AABCM3975E3ZK 		CMBM03045A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) INLET VANE DEVICE ASSEMBLY() DRG.NO.172.31.135CB-1ACB C NOT ESTABLISHED
2) TANK EXPANSION ASSY.() DRG.NO. 176.31.003 CB-ACB C Non Established
Category : P
Grade : I
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LH FRONT TANK / 172.33.010SP[62]() Specification : LH FRONT TANK / 172.33.010SP E Nonestab
2) TANK FRONT RH / 172.33.011SP[62]() Specification : TANK FRONT RH / 172.33.011SP E Nonestab
3) FRONT RACK TANK / 172.33.012SP-1[62]() Specification : FRONT RACK TANK / 172.33.012SP-1 E Nonestab
4) MIDDLE RACK TANK / 172.33.013SP-1[62]() Specification : MIDDLE RACK TANK / 172.33.013SP-1 E Nonestab
5) TANK RIGHT HAND / 172.33.015SP-1[62]() Specification : TANK RIGHT HAND / 172.33.015SP-1 E Nonestab
6) DRIVERS SEAT / 188.65SP-2[62]() Specification : DRIVERS SEAT / 188.65SP-2 E Nonestab
7) DRIVERS SEAT / 188.65SP-3[62]() Specification : DRIVERS SEAT / 188.65SP-3 E Nonestab
8) DRIVERS SEAT / 172.65SP-5[62]() Specification : DRIVERS SEAT / 172.65SP-5 E Nonestab
9) DRIVERS SEAT / 172.65SP-6[62]() Specification : DRIVERS SEAT / 172.65SP-6 E Nonestab
Category : p
Grade : Grade I
Size :
1) Heavy Vehicle Factory
Name Specification Use Status
1) INLET VANE DEVICE ASSEMBLY[06]() Specification : DRG.NO.172.31.135CB-1ACB R Nonestab
2) COOLING SYSTEM TO DRG NO 172 31SP 1[62]() Specification : COOLING SYSTEM / 172.31SP-1 E Nonestab
3) RACK WITH RADIATOR AND SHIELD TO DRG NO 172 31 099CB[62]() Specification : RACK WITH RADIATOR AND SHIELD / 172.31.099CB E Nonestab
4) RADIATOR WATER LH ASSY TO DRG NO 175 31 001CB ACB[62]() Specification : RADIATOR WATER L.H. ASSY / 175.31.001CB-ACB E Nonestab
5) WATER RADIATOR RH DRG NO 175 31 002CB[62]() Specification : WATER RADIATOR R.H. / 175.31.002CB E Nonestab
6) OIL COOLER TO DRG NO 175 32 001CB A[62]() Specification : OIL COOLER / 175.32.001CB-A E Nonestab
7) OIL COOLER TO DRG NO 175 32 002CB[62]() Specification : OIL COOLER / 175.32.002CB E Nonestab
8) COOLER OIL[62]() Specification : COOLER,OIL / 175.32.067CB-A E Nonestab
Category : p
Grade : Grade I
Size :
700 Rider Leather Finishers
88/43, Prem Nagar, Kanpur Uttar Pradesh
PIN1 : 208001
Phone No. : 9935125786
GSTIN : 09AABPY1320N1ZG 		KNPM02457A

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) BUFF. VEGETABLE TANNED CRUST LEATHER (HARNESS QUALITY) VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
2) WET BLUE FOR LINING LEATHER() QA/L/WET BLUE/BUFF(Lining) date 19.05.2009 R
3) LEATHER BUFF WET BLUE FOR ZUGGRAIN/FOOTBALL PRINT/UPPER LEATHER() QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine. R
4) BUFF. WET BLUE LEATHER SPLITTED TO 2.5MM THICKNESS() AS PER REQUIREMENT & SPECIFICATION R
5) GOAT SKIN CHROME TANNED CRUST() AS PER REQUIREMENT & SPECIFICATION R
6) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOTBALL PRINT() AS PER REQUIREMENT & SPECIFICTAION R
7) LEATHER CHROME TANNED SIDE BLACK FOOTBALL PRINTED FINISH WITH CHROME CONTENTS 3 - 3.5 %() AS PER REQUIREMENT & SPECIFICTAION R
8) LEATHER BUFF. WET BLUE FOR ZUGGRAIN() QA/L/Wet/BUC/Buff. date 10.06.97 R
9) LEATHER CHROME TANNED ZUGGRAIN VARIOUS() AS PER REQUIREMENT & SPECIFICTAION R
10) SHEEP/GOAT SKIN CHROME TANNED WET BLUE (FOR GLOVING) VARIOUS() AS PER REQUIREMENT & SPECIFICTAION R
11) COMBINATION TD. LINING LEATHER BLACK, THICKNESS 0.8/1.0MM() IS:3940, TYPE-1 1979 R
12) LEATHER LINING BLACK COMBINATION TANNED PRINTED DRY MILLED() IS:3840-1996 TYPE - 1 R
13) SHEEP SKIN BARK TANNED() AS PER REQUIREMENT & SPECIFICATION R
14) SHEEP/GOAT SKIN RAW WET SALTED() AS PER REQUIREMENT & SPECIFICATION R
15) LEA. BUFF. VEG. TD. SOLE SIDES (LIGHT) TRADE THICKNESS 3.5 to 4.25 mm() IS: 579 (Pt.-I) - 1973 R
16) HIDE "A" CLASS LIMED WEIGHT 10-18 KGS. () AS PER SPECN. NO. QA/RH/6/C R
17) SHEEP/GOAT SKIN LIMED() AS PER REQUIREMENT & SPECIFICATION R
18) BUFFALLOW HIDE (SHE CLASS) VARIOUS () AS PER REQUIREMENT & SPECIFICATION R
19) BUFF. VEGETABLE INSOLE FOR BOOT DVS IN VARIOUS SIZES() AS PER REQUIREMENT & SPECIFICATION R
20) FULL SOCKS LEATHER WITH EVA CUSION IN VARIOUS SIZES() AS PER REQUIREMENT & SPECIFICATION R
21) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
22) LEATHER LINING COMBINATION TANNED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
23) SHEEP/GOAT SKIN COMBINATION TANNED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
24) OUTER COMPONENTS FOR GLOVES LEATHER WHITE LINED IN VARIOUS SIZES () AS PER REQUIREMENT & SPECIFICATION R Established
25) ROPE BAGGAGE MK-I() JSS: 3770-20 R Established
26) LINING FELT BROWN SHORT NO. 1() IND/GS/1269(E) R Established
27) PANNEL PGS NO.1() IND/GS/1269(C) R Established
28) COLLER BREAST PA LONG COMPLETE() IND/GS/1547 (A) R Established
29) FLAP NEAR (SADDLE SU PATT.02). DRG.NO. IND/GS/1597(b)() AS PER REQUIREMENT & SPECIFICATION R Established
30) CRUPPER PGS NO. 1 COMPLETE() IND/GS/1575 (A) R Established
31) REINS BRIDOON PGS COMPLETE() IND/GS/646 (D) R Established
32) STRAP GIRTH PGS NO. 0 COMPLETE() IND/GS/1593 R Established
33) HEAD BRIDLE SU LARGE COMPLETE() IND/GS/1544 R Established
34) BOOT POULTICE NO. 1 COMPLETE() IND/TC/3116 (C) R Established
35) BREECHING PGS MK-4 NO. 0 COMPLETE() IND/GS/1588 R Established
36) BREECHING PGS MK-4 NO. 1 COMPLETE() IND/GS/1588 R Established
37) BREECHING PGS MK-4 No. 00 COMPLETE() IND/GS/1588 (5671/PK) R Established
38) STRAP SUPPORTING BREECHING PA COMPLETE() IND/GS/1332 (C) R Established
39) CRUPPER PA SMALL COMPLETE() IND/GS/1576 R Established
40) CRUPPER PGS NO. I DOCK COMPLETE() IND/GS/1575 (A) R Established
41) CRUPPER PGS NO. 00 COMPLETE() IND/GS/663 (E) R Established
42) CRUPPER PA LARGE COMPLETE() IND/GS/1576 R Established
43) PANNEL PGS NO. 0 COMPLETE() IND/GS/542 (F) R Established
44) PANNEL NEAR MK-3 COMPLETE() IND/GS/556 (C) R Established
45) COLLER BREAST PGS MK-II NO. 1 COMPLETE() IND/GS/1545 (A) R Established
46) SURSINGLE SU LARGE COMPLETE() IND/GS/1195 (B) R Established
47) SADDLE SU PATT. 02, PANNEL OFF MK-3 COMPLETE() IND/GS/556 (C) R Established
48) PANNEL PGS NO. 2() IND/GS/1269(C) (4712/PK DT.08.06.86) R Established
49) PANNEL PA() IND/GS/1225(B) R Established
50) PANNEL PGS STRAP NO. 2 COMPLETE() IND/GS/1269 (C) R Established
51) PANNEL PGS STRAP SHORT COMPLETE() IND/GS/1269 (C) R Established
52) LINING FELT BROWN LONG NO. 1 COMPLETE() IND/GS/1269 (C) R Established
53) LINING FELT BROWN LONG NO. 2 COMPLETE() IND/GS/1269 (C) R Established
54) ROPE LOADING 18.3 MTRS. COMPLETE() JSS - 03-03-01 FEB., 1970 R Established
55) BOOT POULTICE NO. 2 COMPLETE() IND/TC/3117 (D) (6443/PK, A TO C/PK dated 07.07.87 R Established
56) REINS HALF REIN COMPLETE() IND/GS/536 (C) R Established
57) STRAP NECK COMPLETE() IND/GS/1885 R Established
58) STRAP CLOCK GIRTH PA MK COMPLETE() IND/GS/1645 R Established
59) CAVISION COMPLETE() IND/GS/1658 (D) R Established
60) FRINGES BROW BAND COTTON 2 MM DIA BLUE() IND/GS/3357 (H) R Established
61) REINS BIT SU COMPLETE() IND/GS/827 (D) R Established
62) HEAD BRIDLE SU SMALL COMPLETE() IND/GS/1544 R Established
63) HEAD BRIDOON PGS SMALL COMPLETE() IND/GS/648 (D) R Established
64) LINING FELT BROWN SHORT NO. 0() IND/GS/542 (F) R Established
65) FLAP OFF (SADDLE SU PATT. 2)() DRG.NO. IND/GS/1597 (b) R Established
66) LEATHER STIRRUP SU COMPLETE() IND/GS/668 (B) R Established
67) ROPE HEAD 274 CMS. COMPLETE() JSS-3-03-06 (5178/PK DT. 28.5.97) R Established
68) SADDLE PA UNIVERSAL() AS PER REQUIREMENT & SPECIFICATION R Established
69) COLLER HEAD SU EXTRA LARGE MK-4 COMPLETE() IND/GS/1884 (6043/PK) R Established
70) GIRTH PA SHORT COMPLETE() IND/GS/645 (D) R Established
71) ATTACHMENT "V" GIRTH OFF COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
72) BREACHING PA LONG MK- III COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
73) STRAP GIRTH PA MK-2 COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
74) GIRTH PA LONG COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
75) GIRTH SU LARGE MK-II COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
76) GIRTH SU MEDIUM MK-II COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
77) BRIDLE WATERING REIN COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
78) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED() AS PER REQUIREMENT & SPECIFICATION R Non Established
79) LEATHER LINING PLAIN NATURAL COMBINATION TANNED (WIHOUT PIGMENT FINISH)() AS PER REQUIREMENT & SPECIFICATION R Non Established
80) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
Category : P
Grade : III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BOOT POULTICE NO. 1 COMPLETE[21]() Specification : IND/TC/3116 © R Estab
2) BOOT POULTICE NO. 2 COMPLETE[21]() Specification : IND/TC/3117 (D) (6443/PK, A TO C/PK dated 07.07.87 R Estab
3) BREECHING PGS MK-4 NO. 0 COMPLETE[21]() Specification : IND/GS/1588 R Estab
4) BREECHING PGS MK-4 NO. 1 COMPLETE[21]() Specification : IND/GS/1588 R Estab
5) BREECHING PGS MK-4 No. 00 COMPLETE[21]() Specification : IND/GS/1588 (5671/PK) R Estab
6) BRIDLE WATERING REIN COMPLETE[21]() Specification : IND/GS/1304(C) (4824/PK) R Estab
7) BUFF. VEGETABLE INSOLE FOR BOOT DVS IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
8) BUFF. VEGETABLE TANNED CRUST LEATHER (HARNESS QUALITY) VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
9) BUFF. WET BLUE LEATHER SPLITTED TO 2.5MM THICKNESS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
10) BUFFALLOW HIDE (SHE CLASS) VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
11) CAVISION COMPLETE[21]() Specification : IND/GS/1658 (D) R Estab
12) COLLER BREAST PA LONG COMPLETE[21]() Specification : IND/GS/1547 (A) R Estab
13) COLLER BREAST PGS MK-II NO. 1 COMPLETE[21]() Specification : IND/GS/1545 (A) R Estab
14) COLLER HEAD SU EXTRA LARGE MK-4 COMPLETE[21]() Specification : IND/GS/1884 (6043/PK) R Estab
15) COMBINATION TD. LINING LEATHER BLACK, THICKNESS 0.8/1.0MM[21]() Specification : IS: 3940, TYPE-1 1979 R Estab
16) CRUPPER PA LARGE COMPLETE[21]() Specification : IND/GS/1576 R Estab
17) CRUPPER PA SMALL COMPLETE[21]() Specification : IND/GS/1576 R Estab
18) CRUPPER PGS NO. 00 COMPLETE[21]() Specification : IND/GS/663 (E) R Estab
19) CRUPPER PGS NO. 1 COMPLETE[21]() Specification : IND/GS/1575 (A) R Estab
20) CRUPPER PGS NO. I DOCK COMPLETE[21]() Specification : IND/GS/1575 (A) R Estab
21) FLAP NEAR (SADDLE SU PATT.02). DRG.NO. IND/GS/1597(b)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
22) FLAP OFF (SADDLE SU PATT. 2)[21]() Specification : DRG.NO. IND/GS/1597 (b) R Estab
23) FRINGES BROW BAND COTTON 2 MM DIA BLUE[21]() Specification : IND/GS/3357 (H) R Estab
24) FULL SOCKS LEATHER WITH EVA CUSION IN VARIOUS SIZES[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
25) GIRTH PA SHORT COMPLETE[21]() Specification : IND/GS/645 (D) R Estab
26) GOAT SKIN CHROME TANNED CRUST[21]() Specification : AS PER REQUIREMENT & SPECIFICTAION R Estab
27) HEAD BRIDLE SU LARGE COMPLETE[21]() Specification : IND/GS/1544 R Estab
28) HEAD BRIDLE SU SMALL COMPLETE[21]() Specification : IND/GS/1544 R Estab
29) HEAD BRIDOON PGS SMALL COMPLETE[21]() Specification : IND/GS/648 (D) R Estab
30) HIDE [21]() Specification : AS PER SPECN. NO. QA/RH/6/C R Estab
31) LEA. BUFF. VEG. TD. SOLE SIDES (LIGHT) TRADE THICKNESS 3.5 to 4.25 mm[21]() Specification : IS: 579 (Pt.-I) - 1973 R Estab
32) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]() Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine R Estab
33) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOTBALL PRINT[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
34) LEATHER BUFF. WET BLUE FOR ZUGGRAIN[21]() Specification : QA/L/Wet/BUC/Buff. date 10.06.97 R Estab
35) LEATHER CHROME TANNED SIDE BLACK FOOTBALL PRINTED FINISH WITH CHROME CONTENTS 3 - 3.5 %[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
36) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
37) LEATHER CHROME TANNED ZUGGRAIN various[21]() Specification : AS PER REQUIREMENT & SPECIFICTAION R Estab
38) LEATHER LINING BLACK COMBINATION TANNED PRINTED DRY MILLED[21]() Specification : IS: 3840-1996 TYPE - 1 R Estab
39) LEATHER LINING COMBINATION TANNED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
40) LEATHER STIRRUP SU COMPLETE[21]() Specification : IND/GS/668 (B) R Estab
41) LINING FELT BROWN LONG NO. 1 COMPLETE[21]() Specification : IND/GS/1269 (C) R Estab
42) LINING FELT BROWN LONG NO. 2 COMPLETE[21]() Specification : IND/GS/1269 (C) R Estab
43) LINING FELT BROWN SHORT NO. 0[21]() Specification : 1023/PK R Estab
44) LINING FELT BROWN SHORT NO. 1[21]() Specification : IND/GS/1269(E) R Estab
45) OUTER COMPONENTS FOR GLOVES LEATHER WHITE LINED IN VARIOUS SIZES [21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
46) PANNEL NEAR MK-3 COMPLETE[21]() Specification : IND/GS/556 (C) R Estab
47) PANNEL PA[21]() Specification : IND/GS/1225(B) R Estab
48) PANNEL PGS NO. 0 COMPLETE[21]() Specification : IND/GS/542 (F) R Estab
49) PANNEL PGS NO. 2 [21]() Specification : IND/GS/1269(C) (4712/PK DT.08.06.86) R Estab
50) PANNEL PGS NO.1[21]() Specification : IND/GS/1269(C) R Estab
51) PANNEL PGS STRAP NO. 2 COMPLETE[21]() Specification : IND/GS/1269 (C) R Estab
52) PANNEL PGS STRAP SHORT COMPLETE[21]() Specification : IND/GS/1269 (C) R Estab
53) REINS BIT SU COMPLETE[21]() Specification : IND/GS/827 (D) R Estab
54) REINS BRIDOON PGS COMPLETE[21]() Specification : IND/GS/646 (D) R Estab
55) REINS HALF REIN COMPLETE[21]() Specification : IND/GS/536 (C) R Estab
56) ROPE BAGGAGE MK-I[21]() Specification : JSS 3770-20 R Estab
57) ROPE HEAD 274 CMS. COMPLETE[21]() Specification : JSS-3-03-06 (5178/PK DT. 28.5.97) R Estab
58) ROPE LOADING 18.3 MTRS. COMPLETE[21]() Specification : JSS - 03-03-01 FEB., 1970 R Estab
59) SADDLE PA UNIVERSAL[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
60) SADDLE SU PATT. 02, PANNEL OFF MK-3 COMPLETE[21]() Specification : IND/GS/556 (C) R Estab
61) SHEEP SKIN BARK TANNED[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
62) SHEEP/GOAT SKIN CHROME TANNED WET BLUE (FOR GLOVING) various[21]() Specification : AS PER REQUIREMENT & SPECIFICTAION R Estab
63) SHEEP/GOAT SKIN COMBINATION TANNED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
64) SHEEP/GOAT SKIN LIMED[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
65) SHEEP/GOAT SKIN RAW WET SALTED[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
66) STRAP CLOCK GIRTH PA MK COMPLETE[21]() Specification : IND/GS/1645 R Estab
67) STRAP GIRTH PGS NO. 0 COMPLETE[21]() Specification : IND/GS/1593 R Estab
68) STRAP NECK COMPLETE[21]() Specification : IND/GS/1885 R Estab
69) STRAP SUPPORTING BREECHING PA COMPLETE[21]() Specification : IND/GS/1332 (C) R Estab
70) SURSINGLE SU LARGE COMPLETE[21]() Specification : IND/GS/1195 (B) R Estab
71) Wet Blue for Lining Leather[21]() Specification : QA/L/WET BLUE/BUFF(Lining) date 19.05.2009 R Estab
72) Net Camouflege Head Dress OG MK-II[21]() Specification : As per reqt. & specification. R Estab
Category : P
Grade : III
Size : S