List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
601 SHAKTHI TECH MANUFACTURING INDIA PRIVATE LIMITED
S.F. No. 348/2A, 348/2B, Agarwal School Road, Somayampalaym Village Post, Kalapanaickenpalayam, Coimbatore Tamil Nadu
PIN1 : 641108
Phone No. : 2426381
GSTIN : 33AATCS5368R1Z8 		CMBS14998E

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102096[62]() Specification : SHAFT TO DRG NO. 166.29.305CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) FRAME ASSY TO 6206207012[62]() Specification : FRAME ASSY TO DRG NO. 172.22.011CB-1CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD THIRD LEFT HAND TO 6206803011[62]() Specification : SHIELD THIRD LEFT HAND TO DRG NO. 172.04.101CB-1 C Nonestab
2) SHIELD 2ND UPPER LEFT HAND TO 6206803017[62]() Specification : SHIELD 2ND UPPER LEFT HAND TO DRG NO. 172.04.131CB-A C Nonestab
3) SHIELD SECOND RH TO 6206803032[62]() Specification : SHIELD SECOND RH TO DRG NO. 172.04.154CB-1 C Nonestab
4) SHIELD 2ND UPPER RIGHT HAND TO 6206803018[62]() Specification : SHIELD 2ND UPPER RIGHT HAND TO DRG NO. 172.04.132CB-A C Nonestab
5) SHIELD 4TH UPPER LEFT HAND TO 6206803037[62]() Specification : SHIELD 4TH UPPER LEFT HAND TO DRG NO. 172.04.160CB-A C Nonestab
6) SHIELD 1ST UPPER LEFT HAND TO 6206803024[62]() Specification : SHIELD 1ST UPPER LEFT HAND TO DRG NO. 172.04.144CB-A C Nonestab
7) SHIELD TO 6206803044[62]() Specification : SHIELD TO DRG NO. 172.04.170CB C Nonestab
8) SHIELD 3RD UPPER RIGHT HAND TO 6206803014[62]() Specification : SHIELD 3RD UPPER RIGHT HAND TO DRG NO. 172.04.107CB-A C Nonestab
9) FIRST SHIELD ASSY TO 6206803029[62]() Specification : FIRST SHIELD ASSY TO DRG NO. 172.04.149CB-1 C Nonestab
10) SHIELD 3RD UPPER LEFT HAND TO 6206803013[62]() Specification : SHIELD 3RD UPPER LEFT HAND TO DRG NO. 172.04.106CB-2 C Nonestab
11) SHIELD 3RD RIGHT HAND TO 6206803012[62]() Specification : SHIELD 3RD RIGHT HAND TO DRG NO. 172.04.102CB-1 C Nonestab
12) SHIELD 4TH UPPER RIGHT HAND TO 6206803038[62]() Specification : SHIELD 4TH UPPER RIGHT HAND TO DRG NO. 172.04.161CB-A C Nonestab
13) 1ST SHIELD ASSY TO 6201004036[62]() Specification : 1ST SHIELD ASSY TO DRG NO. 184.04.047CB-1CB C Nonestab
14) THIRD LEFT HAND SHIELD ASSY TO 6201004019[62]() Specification : THIRD LEFT HAND SHIELD ASSY TO DRG NO. 184.04.016CBCB C Nonestab
15) THIRD RIGHT HAND SHIELD ASSY TO 6201004020[62]() Specification : THIRD RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.017CBCB C Nonestab
16) 2ND LEFT HAND SHIELD ASSY TO 6201004037[62]() Specification : 2ND LEFT HAND SHIELD ASSY TO DRG NO.184.04.048CB-1CB C Nonestab
17) 2ND RIGHT HAND SHIELD ASSY TO 6201004038[62]() Specification : 2ND RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.049CB-1CB C Nonestab
18) SHIELD ASSY TO 6206803045[62]() Specification : SHIELD ASSY TO DRG NO. 172.04.185CB C Nonestab
19) FOURTH LEFT HAND SHIELD ASSY TO 6206803041[62]() Specification : FOURTH LEFT HAND SHIELD ASSY TO DRG NO. 172.04.167CB-2CB C Nonestab
20) FOURTH RIGHT HAND SHIELD ASSY TO 6206803023[62]() Specification : FOURTH RIGHT HAND SHIELD ASSY TO DRG NO. 172.04.138CB-1CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 2ND LEFT HAND TO 6206803031[62]() Specification : SHIELD 2ND LEFT HAND TO 172.04.153CB-1 C Nonestab
2) SHIELD 1ST UPPER RIGHT HAND TO 6206803025[62]() Specification : SHIELD 1ST UPPER RIGHT HAND TO DRG NO. 172.04.145CB-A C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) HULL VISION DEVICES CLEANING SYSTEM TO 6201085001[62]() Specification : HULL VISION DEVICES CLEANING SYSTEM TO DRG. NO. 172.85SP-2 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) DEVICE FOR CLEANING AIR CLEANER ELEMENT TO 6206705002[62]() Specification : DEVICE FOR CLEANING AIR CLEANER ELEMENT TO DRG. NO. B-MTO.1.39.002CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) CELL ASSEMBLY TO 6201218015[62]() Specification : CELL ASSEMBLY TO DRG. NO. 177.18.001SBSB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRANCH PIPE ASSY TO 6206801067[62]() Specification : BRANCH PIPE ASSY TO DRG. NO.175.01.045CB-2A C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) PAD TO 6201070149[62]() Specification : PAD TO DRG. NO.188.70.001-1 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) ELECTRIC OIL PUMP M3H 2 WITH ELECTRIC MOTOR TO 6206304028[62]() Specification : ELECTRIC OIL PUMP M3H-2 WITH ELECTRIC MOTOR MH1-2C (FINALLY EQUIPPED FOR SERVICE) TO DRG. NO.175.32.031CB-A C Nonestab
Category :
Grade : Grade III
Size : M
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 6206406244 AVIATION COMPRESSOR AK 150C ASSY[62]() Specification : DRG NO.AK150C-01-CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER TO 6206211020[62]() Specification : LEVER TO DRG NO. 172.28.009CB-2 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) RESISTANCE THERMOMETER SENDING UNIT P 1 TO 6201031273[62]() Specification : RESISTANCE THERMOMETER SENDING UNIT P-1 TO DRG. NO. TY:B25.7529.001-87 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) RIGHT HAND SHIELD ASSY TO 6206803357[62]() Specification : RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.026CB-1CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LOCK HANDLE TO 6206109012[62]() Specification : LOCK HANDLE TO 432.11.007CB-1 C Nonestab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) CYLINDER HEAD COVER RH TO DRG.NO. SB 20-06-08-2() Specification : SB 20-06-08-2 C Estab
2) FUEL FILTER ASSY TO DRG NO. CB 20-29-00-8() Specification : SB 20-29-00-8 C Estab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) CONVERTER PAG 1F TO 6206501684[62]() Specification : CONVERTER PAG 1F TO DRG NO. TY:002.016 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BOX FOR UNDER WATER STREAM CROSSING EQPT TO 6206607955[62]() Specification : BOX FOR UNDER WATER STREAM CROSSING EQPT TO DRG NO. 172.91.251CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO 6206505016[62]() Specification : MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO DRG NO. 172.74.034CB-3 C Nonestab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) OUTLET RH[62]() Specification : 406-30-11A C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) CYLINDER LINER CASTING OPN 30[38]() Specification : 303-07-26 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) ASSY OF TOOTHED CONTROL RACK[62]() Specification : SK 1382 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) Inclind Shaft Gear BRG.() Specification : 308-14-11 C Estab
2) Bearing Box() Specification : SB 3327-02-8-01 C Estab
3) Regulator Lever() Specification :SB 315-777-2 C Estab
4) GEAR[62]() Specification : 20-08-203-3 C Estab
5) Governer Slotted Disc() Specification : 315-611-2 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) Oil Pump Body() Specification : 20-12-124-8 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) SB.Assy.Splined Couplingto DRG.No. 92-1106-220() Specification : 92-1106-220 C Estab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) GRILL ASSEMBLY TO 6206102594[62]() Specification : GRILL ASSEMBLY TO DRG NO.172.02.189CB-1CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) FIRST BEARING BODY Description : FULY FINISHED 20-01-93-9() Specification : FIRST BEARING BODY to DRG. NO: 20-01-93-9 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category : ddp
Grade : 3
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ROAD WHEEL ASSY TO 6206410001[62]() Specification : ROAD WHEEL ASSY TO DRG. NO. 172.50.001CB-BCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEVER ASSY TO 6201095016[62]() Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) REDUCER COMPLETE WITH CABLE ASSY TO 6206702068[62]() Specification : REDUCER COMPLETE WITH CABLE ASSY. TO DRG NO. 172.95.021CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) IDLE GEAR WITH BUSH ASSY TO DRG NO. SB 3338-409() Specification : SB 3338-409 C Estab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) 19 TYPES OF PNEUMATIC VALVES() As per drg C Not Established
2) 06 TYPES OF HYDRAULIC VALVES() As per drg C Not Established
3) FRAME ASSY (02 TYPES)() DRG NO. 1) 179.15.035CBCB, 2) 188.15.006CBCB C Not Established
4) HOOK() DRG NO. 172.18.150.1B C Not Established
5) BRACKET ASSY() DRG NO.172.53.003CBCB C Not Established
6) SERVICE ASSISTANCE FOR 06 TYPES OF PLATES() AS PER DRG C Non Established
7) MOUNTING OF SELECTOR SENDING ASSY() DRG.NO.172.70.184CB-1CB C Non Established
8) UPPER HOUSING() DRG.NO.172.70.183CB-1CB C Non Established
9) CASE ASSY.FOR ELECTRIC BULBS AND FUSES() DRG.NO.175.91.064CBCB C Non Established
10) BOX FOR UNDER-WATER STREAM CROSSING EQPT() DRG.NO.172.91.302CBCB C Non Established
11) MAGAZINE CASE() DRG.NO.188.94.039SBSB C Non Established
12) SHIELD ASSY() DRG.NO.172.91.132CB C Non Established
13) INJECTOR() DRG.NO.175.36.013CB-2A C Non Established
14) CONTROL PANEL ASSEMBLY DRAWING() DRG.NO.902.02.000CB C Non Established
15) CONTROL AND SIGNALLING PANEL P11-5 SPECIFICATION() DRG.NO.P11-5.000TY C Non Established
16) VALVE BODY() DRG.NO.172.31.093CB-1 C Non Established
17) SIGNAL LIGHT ASSY() DRG.NO.54.83.48CB-ACB C Non Established
18) 1)RH DISTRIBUTING MECHANISM ASSY, 2)LH DISTRIBUTING MECHANISM ASSY() DRG.NO. 1)172.62.001CB-2CB, 2)172.62.002CB-2CB C Non Established
19) MACHINING ASSISTANCE FOR SMALL, MEDIUM AND LARGE COMPONENTS() AS PER DRG C Non Established
20) LOADING CONTROL UNIT ASSEMBLY DRAWING() DRG.NO.P3.175-1C-000CB C Non Established
21) AUTOMATIC CONTROL UNIT BA20-1C ASSY() DRG.NO.172.70.063CB-1 C Non Established
22) PRESSURE INDICATORS ID-IT() DRG.NO.TY:25-02.110461-85 C Non Established
23) FLEXIBLE SHAFT ASSEMBLY() DRG.NO.GV.301.380260 0.M.CB C Non Established
24) STARTER GENERATOR COOLING SYSTEM() DRG.NO.176.31.02SP C Non Established
25) ENGINE SHUT-DOWN UNIT BOD-1C() DRG.NO.BOD-1C.000CB C Non Established
26) DISC WITH HUB ASSY(02 TYPES)() DRG.NO. 1)172.50.003CB-BCB, 2)172.50.004CB-BCB C Non Established
27) BRANCH PIPE ASSY.() DRG.NO.188.04.055CB-1CB C Non Established
28) ENGINE BED() DRG.NO.HVF/T-90/HULL/266 C Non Established
29) DEFLECTOR BAG ASSY() DRG.NO.172.22.8CBCB C Non Established
30) MOUNTING OF AUTOMATIC PRESSURE REGULATOR (WITHOUT ADY-2C)() DRG.NO.175.60.043CBCB (W/O ADY-2C) C Non Established
31) R.H. SEAT RISER() DRG.NO.175.15.014CB-1 C Non Established
32) EXTERNAL FUEL TANK CUT-OFF COCK ASSY.() DRG.NO.176.33.023CBCB C Non Established
33) ELEVATING MECHANISM ASSY.() DRG.NO.188.15.005CBCB C Non Established
34) CASING() DRG.NO.CG.10.1C.001 C Non Established
35) STARTER GENERATOR CHANGEOVER UNIT BCP-1M SPECIFICATIONS() DRG.NO.BCP-1M.000TY C Non Established
36) 1)LEFT HAND FRONT FUEL TANK ASSY, 2)RH FRONT FUEL TANK ASSY, 3)EXPANSION TANK ASSY() DRG.NO. 1)175.33.002CB-1CB, 2)175.33.003CB-2CB, 3)175.33.006CB-4CB C Non Established
37) FUEL GUAGE ASSY() DRG.NO.IT2.1C.000CB C Non Established
38) MEMORY UNIT() DRG.NO.172.74.001CB-3 C Non Established
39) TURRET TRAVERSING MECHANISM ELECTROMAGNET ASSY.() DRG.NO.434.23.012CB-2CB C Non Established
40) SEPARATOR AND MOISTURE() DRG.NO.175.60.002CB-1CB C Non Established
41) SERVICE ASSISTANCE (MACHINING) FOR 1)FLAP LEFT HAND 2)BRACKET ASSY 3)BRACKET ASSY () DRG.NO.1)172.28.029CB-2A 2)172.91.223CBCB 3)172.91.224CBCB C Non Established
42) RELAY BOX() DRG.NO.KRP1.000 C Non Established
43) EXTENSION FOR WRENCH TIGHTENING SUPPORT ROLLER BOLTS() DRG.NO.175.95.043CB-2 C Non Established
44) CONTROL UNIT BYF-2 TECHNICAL SPECIFICATIONS() DRG.NO.BYF2.000TY C Non Established
45) LIGHT INDICATOR PANEL TECHNICAL SPECIFICATION() DRG.NO.TC6.000TY C Non Established
46) DISTRIBUTION BOX KP175-3C ASSEMBLY DRAWING() DRG.NO.KP175.3C.000CB C Non Established
47) PACKING RINGS () DRG.NO. 172.35.027-11 C Non Established
48) DAIL (FOR ALIGNING ENGINE WITH CONNECTING GEAR BOX)() DRG.NO. 175.95.167 C Non Established
49) PRESSURE RECEIVER PD-IT ASSY.() DRG.NO. 2B2.832.402CB-02 C Non Established
50) INDICATOR YD-801 ASSY.() DRG.NO. 3PM.493.004CB C Non Established
51) RELAY REGULATOR P10TMY-1C WITH SHOCK ABSORBER ASSY.() DRG.NO. 175.70.162CB C Non Established
52) DISTRIBUTION PANEL ASSY. LH() DRG.NO. 172.71.013CB-6 C Non Established
53) EXTERNAL SOCKET(STARTING)ASSY() DRG.NO. 172.70.175CB C Non Established
54) PRESSURE RECEIVER PD-IT ASSY() DRG.NO. 2B2.832.402CB-02 C Non Established
Category : DDP,DP
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COUNTER LIMITER CO 2 TO 6201070205[62]() Specification : COUNTER LIMITER CO-2 TO DRG NO.CO2.000CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]() Specification : LEFT HAND SUCTION PUMP COVER TO DRG NO. 172.46.009CB-2CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) CARRIER ASSY TO 6201040010[62]() Specification : CARRIER ASSY / 172.40.055CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BLOWER TO 6206604019[62]() Specification : BLOWER TO DRG NO. 434.87.003CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) CARRIER TO 6201043004[62]() Specification : CARRIER TO DRG NO. 172.43.005SB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) CARRIER ASSY TO 6201040011[62]() Specification : CARRIER ASSY TO DRG NO. 172.40.056CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) STOPPING BRAKE HOUSING LEFT HAND TO 6201040022[62]() Specification : STOPPING BRAKE HOUSING LEFT HAND TO DRG NO.172.40.065CBCB C Nonestab
2) STOPPING BRAKE FOR HOUSING RIGHT HAND ASSY TO 6201040021[62]() Specification : STOPPING BRAKE FOR HOUSING RIGHT HAND ASSY TO DRG NO.172.40.064CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEFT HAND FRONT FLANGE ASSY TO 6201040019[62]() Specification : LEFT HAND FRONT FLANGE ASSY TO DRG NO.172.40.063CBCB C Nonestab
2) RIGHT HAND FRONT FLANGE ASSY TO 6201040017[62]() Specification : ATTACHED C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) LEFT HAND REAR FLANGE ASSY TO 6201040026[62]() Specification : LEFT HAND REAR FLANGE ASSY TO DRG NO.172.40.071CBCB C Nonestab
2) RIGHT HAND REAR FLANGE ASSY TO 6201040025[62]() Specification : RIGHT HAND REAR FLANGE ASSY TO DRG NO. 172.40.070CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) D 20 SWITCHING UNIT TO 6206591102[62]() Specification : D 20 SWITCHING UNIT TO DRG NO. 172.70.276CB-CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) Mounting of Super Charger() SB 3338-00-16 E Not Estab
Category : P
Grade : II
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Mounting of Super Charger() SB 3338-00-16 E Not Estab
Category : P
Grade : II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LINK BELT FOR CARTRIDGE TO 6201000274[62]() Specification : LINK BELT FOR CARTRIDGE 12.7MM TO DRG NO. 6L19CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) INSTRUMENT PANEL WITH ACCESSORIES WITH PRE HEATER CIRCUITRY TO 6206501578[62]() Specification : INSTRUMENT PANEL WITH ACCESSORIES WITH PRE HEATER CIRCUITRY TO DRG NO.HVF.70.069CB C Nonestab
Category : p
Grade : 3
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) Delivery valve..[62]() Specification : Delivery valve.. E Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) INTAKE MANIFOLD[62]() Specification : SB 20-19-00-1 C Estab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) ASSY OF DRIVE COUPLING HOUSING[62]() Specification : ASSY OF DRIVE COUPLING (HOUSING) TO DRG NO. SB 3334-10-8 C Estab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) STOPPING BRAKE HOUSING RIGHT HAND[62]() Specification : STOPPING BRAKE HOUSING RIGHT HAND C Nonestab
2) STOPPING BRAKE HOUSING LEFT HAND[62]() Specification : STOPPING BRAKE HOUSING LEFT HAND R Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) INSTALLATION OF DRIVERS INSTRUMENT PANEL ASSY TO 6206501007[62]() Specification : INSTALLATION OF DRIVERS INSTRUMENT PANEL ASSY TO DRG NO. 172.70.007CB-19CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) THIRD OUTER BOX (FOR SPTA) ASSY[06]() Specification : THIRD OUTER BOX (FOR SPTA) ASSY / 175.91.020CBCB C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) TANK EXPANSION ASSEMBLY DRAWING[06]() Specification : TANK EXPANSION ASSEMBLY DRAWING / 176.31.003CB-ACB C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FAN ASSY TO DRG NO 188 31 043CBCB[62]() Specification : FAN ASSY TO DRG NO 188 31 043CBCB C Nonestab
2) FAN TO DRG NO 172 31 120CBCB[62]() Specification : FAN TO DRG NO 172 31 120CBCB C Nonestab
3) T JOINT TO DRG NO 2A31 CB42 41CB PL[61]() Specification : T JOINT TO DRG NO 2A31 CB42 41CB PL C Nonestab
4) T JOINT FOR CHECKING THE PRESSURE TO DRG NO ADK7871 7710SB[42]() Specification : T JOINT FOR CHECKING THE PRESSURE TO DRG NO ADK7871 7710SB C Nonestab
5) SHIELD TO DRG NO 176 70 001[62]() Specification : SHIELD TO DRG NO 176 70 001 C Nonestab
6) BLOWER MANUAL CONTROL TO DRG NO 172 87 079CB 1CB[62]() Specification : BLOWER MANUAL CONTROL TO DRG NO 172 87 079CB 1CB C Nonestab
7) RACK ASSY TO DRG NO 172 91 287CBCB[62]() Specification : RACK ASSY TO DRG NO 172 91 287CBCB C Nonestab
8) FLANGE[06]() Specification : STEEL 20 GOST 977-88 C Nonestab
9) BRACKET BASE[06]() Specification : BRACKET BASE C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DISTRIBUTION BOX TO 6206004225[74]() Specification : DISTRIBUTION BOX TO DRG 175-3C/KP 175.3C.000CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) DISTANCE SLEEVE[62]() Specification : DISTANCE SLEEVE 172.25.071B E Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) CLUTCH SHAFT ASSY TO 6201063014[62]() Specification : CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) PRE HEATER ASSY TO 6201036013[62]() Specification : PRE HEATER ASSY TO DRG NO. 188.36.001CBCB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) RELAY REGULATOR P15M 3C ASSEMBLY TO 6201070212[62]() Specification : RELAY REGULATOR P15M-3C ASSEMBLY TO DRG NO. P15M-3C.000CB C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) MOUNTING OF INTERNAL FUEL TANKS AND ACCESSORIES TO 6201033001[62]() Specification : MOUNTING OF INTERNAL FUEL TANKS AND ACCESSORIES / 188.33SP-4 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) 4TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831638[62]() Specification : 172.01.639-4 C Nonestab
2) 5TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831639[62]() Specification : 172.01.640-4 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) COVER TO LF 6206206215[62]() Specification : 432 TY 10 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) 6TH RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO LF 6206801667[62]() Specification : GOST 26645 - 85 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRANCH PIPE TO LF 6206831323[62]() Specification : GOST 26645-85 C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) AIR CLEANER ASSY / 176.34.001CB-3CB[62]() Specification : AIR CLEANER ASSY / 176.34.001CB-3CB E Nonestab
2) AIR CLEANER ASSY / 188.34.001CBCB[62]() Specification : AIR CLEANER ASSY / 188.34.001CBCB E Nonestab
3) TUBE ASSY / 188.34.015CBCB[62]() Specification : TUBE ASSY / 188.34.015CBCB E Nonestab
4) LEFT-HAND VALVE ASSY / 188.34.003CBCB[62]() Specification : LEFT-HAND VALVE ASSY / 188.34.003CBCB E Nonestab
5) RIGHT-HAND VALVE ASSY / 188.34.012CBCB[62]() Specification : RIGHT-HAND VALVE ASSY / 188.34.012CBCB E Nonestab
6) VALVE LH / 176.34.007CB-1[62]() Specification : VALVE LH / 176.34.007CB-1 E Nonestab
7) BRANCH PIPE ASSY / 188.34.005CBCB[62]() Specification : BRANCH PIPE ASSY / 188.34.005CBCB E Nonestab
8) LEFT-HAND BRANCH PIPE ASSY / 188.34.014CBCB[62]() Specification : LEFT-HAND BRANCH PIPE ASSY / 188.34.014CBCB E Nonestab
9) TUBE LEFT HAND / 176.34.003CB-1CB[62]() Specification : TUBE LEFT HAND / 176.34.003CB-1CB E Nonestab
10) TUBE RIGHT-HAND / 172.34.062CB-1CB[62]() Specification : TUBE RIGHT-HAND / 172.34.062CB-1CB E Nonestab
11) BRANCH PIPE / 176.34.006CBCB[62]() Specification : BRANCH PIPE / 176.34.006CBCB E Nonestab
12) BRANCH PIPE / 176.34.009CBCB[62]() Specification : BRANCH PIPE / 176.34.009CBCB E Nonestab
13) BRACKET ASSY / 188.34.016CBCB[62]() Specification : BRACKET ASSY / 188.34.016CBCB E Nonestab
14) BRACKET / 176.34.021CB-1CB[62]() Specification : BRACKET / 176.34.021CB-1CB E Nonestab
15) SHIELD / 176.34.018CBCB[62]() Specification : SHIELD / 176.34.018CBCB E Nonestab
16) REAR SHIELD ASSY / 188.34.018CBCB[62]() Specification : REAR SHIELD ASSY / 188.34.018CBCB E Nonestab
17) SHIELD ASSY / 188.34.020CBCB[62]() Specification : SHIELD ASSY / 188.34.020CBCB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Code 91 & 93 Stowage/Mounting of SPTA/Racks in Hull & Turret[62]() Specification : Code 91 & 93 Stowage/Mounting of SPTA/Racks in Hull & Turret E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ASSY.CARRIER WITH FRESH WATER CONTAINER (28 LITERS) / CQA(HV)5-91-245[62]() Specification : ASSY.CARRIER WITH FRESH WATER CONTAINER (28 LITERS) / CQA(HV)5-91-245 E Nonestab
2) EXPANSION TANK ASSY / 175.33.006CB-4CB[62]() Specification : EXPANSION TANK ASSY / 175.33.006CB-4CB E Nonestab
3) TANK / 175.85.005CB-3[62]() Specification : TANK / 175.85.005CB-3 E Nonestab
4) FIRST EXTERNAL TANK ASSY / 175.33.007CB-2CB[62]() Specification : FIRST EXTERNAL TANK ASSY / 175.33.007CB-2CB E Nonestab
5) THIRD EXTERNAL TANK ASSY / 175.33.009CB-2CB[62]() Specification : THIRD EXTERNAL TANK ASSY / 175.33.009CB-2CB E Nonestab
6) MAIN OIL TANK / 175.32.003CB-5A[62]() Specification : MAIN OIL TANK / 175.32.003CB-5A E Nonestab
7) BOXES,ICE,SMALL / 7105.000010[62]() Specification : BOXES,ICE,SMALL / 7105.000010 E Nonestab
8) FRONT RACK TANK ASSY / 172.33.225CB-2CB[62]() Specification : FRONT RACK TANK ASSY / 172.33.225CB-2CB E Estab
9) RIGHT HAND TANK ASSY / 172.33.231CB-2CB[62]() Specification : RIGHT HAND TANK ASSY / 172.33.231CB-2CB E Nonestab
10) TANK RACK FRONT ASSY. / 172.33.225CB-1CB[62]() Specification : TANK RACK FRONT ASSY. / 172.33.225CB-1CB E Nonestab
11) ASSY.FUEL TANK / PV572.0705.0001[62]() Specification : ASSY.FUEL TANK / PV572.0705.0001 E Nonestab
12) LEFT HAND FRONT FUEL TANK ASSY / 175.33.002CB-1CB[62]() Specification : LEFT HAND FRONT FUEL TANK ASSY / 175.33.002CB-1CB E Nonestab
13) RH FRONT FUEL TANK ASSY / 175.33.003CB-2CB[62]() Specification : RH FRONT FUEL TANK ASSY / 175.33.003CB-2CB E Nonestab
14) MIDDLE RACK TANK / 172.33.243CB[62]() Specification : MIDDLE RACK TANK / 172.33.243CB E Nonestab
15) ASSY TANK RACK MIDDLE / 172.2M.33.005CB[62]() Specification : ASSY TANK RACK MIDDLE / 172.2M.33.005CB E Nonestab
16) MAIN OIL TANK ASSY / 188.32.053CBCB[62]() Specification : MAIN OIL TANK ASSY / 188.32.053CBCB E Nonestab
17) TRANSMISSION OIL TANK ASSY / 188.32.003CBCB[62]() Specification : TRANSMISSION OIL TANK ASSY / 188.32.003CBCB E Nonestab
18) EXPANSION TANK ASSY / 188.31.046CB-1CB[62]() Specification : EXPANSION TANK ASSY / 188.31.046CB-1CB E Nonestab
19) TANK / 176.31.004CBCB[62]() Specification : TANK / 176.31.004CBCB E Nonestab
20) TANK / PV572.0711.0066[62]() Specification : TANK / PV572.0711.0066 E Nonestab
21) TANK / 175.86.005CB-1[62]() Specification : TANK / 175.86.005CB-1 E Nonestab
22) REPLENISHING OIL TANK ASSY / 175.32.094CB-1CB[62]() Specification : REPLENISHING OIL TANK ASSY / 175.32.094CB-1CB E Nonestab
23) SECOND EXTERNAL TANK ASSY / 175.33.008CB-2CB[62]() Specification : SECOND EXTERNAL TANK ASSY / 175.33.008CB-2CB E Nonestab
24) FOURTH EXTERNAL TANK ASSY / 175.33.010CB-2CB[62]() Specification : FOURTH EXTERNAL TANK ASSY / 175.33.010CB-2CB E Nonestab
25) FIFTH EXTERNAL TANK ASSY / 175.33.011CB-2CB[62]() Specification : FIFTH EXTERNAL TANK ASSY / 175.33.011CB-2CB E Nonestab
26) EXTERNAL OIL TANK ASSY / 188.33.007CB-1CB[62]() Specification : EXTERNAL OIL TANK ASSY / 188.33.007CB-1CB E Nonestab
27) ASSY TANK OIL EXTERNALLY MOUNTED / 175.33.012CB-1ACB[62]() Specification : ASSY TANK OIL EXTERNALLY MOUNTED / 175.33.012CB-1ACB E Nonestab
28) ANTI-FREEZE TANK ASSY / 175.31.073CBCB[62]() Specification : ANTI-FREEZE TANK ASSY / 175.31.073CBCB E Nonestab
29) MAGAZINE CASE / 188.94.039SBSB[62]() Specification : MAGAZINE CASE / 188.94.039SBSB E Nonestab
30) FRONT RACK TANK M1K / 172.33.231CB-1CB[62]() Specification : FRONT RACK TANK M1K / 172.33.231CB-1CB E Nonestab
31) TANK ASSY / 188.86.045CBCB[62]() Specification : TANK ASSY / 188.86.045CBCB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COMPENSATOR / 172.35.028CB[62]() Specification : COMPENSATOR / 172.35.028CB E Nonestab
2) EXHAUST SYSTEM / 188.35SP-4[62]() Specification : EXHAUST SYSTEM / 188.35SP-4 E Nonestab
3) RIGHT HAND SUCTION PUMP ASSY / 172.46.001CB-4CB[62]() Specification : RIGHT HAND SUCTION PUMP ASSY / 172.46.001CB-4CB E Nonestab
4) RH DISTRIBUTING MECHANISM ASSY / 172.62.001CB-2CB[62]() Specification : RH DISTRIBUTING MECHANISM ASSY / 172.62.001CB-2CB E Nonestab
5) LH DISTRIBUTING MECHANISM ASSY / 172.62.002CB-2CB[62]() Specification : LH DISTRIBUTING MECHANISM ASSY / 172.62.002CB-2CB E Nonestab
6) LEFT HAND SUCTION PUMP ASSY / 172.46.017CBCB[62]() Specification : LEFT HAND SUCTION PUMP ASSY / 172.46.017CBCB E Nonestab
7) SUCTION PUMP ASSY / 172.46.002CB-1CB[62]() Specification : SUCTION PUMP ASSY / 172.46.002CB-1CB E Nonestab
8) DELIVERY PUMP ASSY / 172.46.010CB-1CB[62]() Specification : DELIVERY PUMP ASSY / 172.46.010CB-1CB E Nonestab
9) MOUNTING OF EXHAUST SYSTEM / 188.35CB-4CB[62]() Specification : MOUNTING OF EXHAUST SYSTEM / 188.35CB-4CB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PANEL ASSY /172.70.029CB-5CB[62]() Specification : PANEL ASSY /172.70.029CB-5CB E Nonestab
2) HEAT SENSING UNIT ASSY / TD1.000CB[62]() Specification : HEAT SENSING UNIT ASSY / TD1.000CB E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) AIR CLEANER ASSY / 176.34.001CB-3CB[62]() Specification : AIR CLEANER ASSY / 176.34.001CB-3CB E Nonestab
2) AIR CLEANER ASSY / 188.34.001CBCB[62]() Specification : AIR CLEANER ASSY / 188.34.001CBCB E Nonestab
3) TUBE ASSY / 188.34.015CBCB[62]() Specification : TUBE ASSY / 188.34.015CBCB E Nonestab
4) LEFT-HAND VALVE ASSY / 188.34.003CBCB[62]() Specification : LEFT-HAND VALVE ASSY / 188.34.003CBCB E Nonestab
5) RIGHT-HAND VALVE ASSY / 188.34.012CBCB[62]() Specification : RIGHT-HAND VALVE ASSY / 188.34.012CBCB E Nonestab
6) VALVE LH / 176.34.007CB-1[62]() Specification : VALVE LH / 176.34.007CB-1 E Nonestab
7) BRANCH PIPE ASSY / 188.34.005CBCB[62]() Specification : BRANCH PIPE ASSY / 188.34.005CBCB E Nonestab
8) LEFT-HAND BRANCH PIPE ASSY / 188.34.014CBCB[62]() Specification : LEFT-HAND BRANCH PIPE ASSY / 188.34.014CBCB E Nonestab
9) TUBE LEFT HAND / 176.34.003CB-1CB[62]() Specification : TUBE LEFT HAND / 176.34.003CB-1CB E Nonestab
10) TUBE RIGHT-HAND / 172.34.062CB-1CB[62]() Specification : TUBE RIGHT-HAND / 172.34.062CB-1CB E Nonestab
11) BRANCH PIPE / 176.34.006CBCB[62]() Specification : BRANCH PIPE / 176.34.006CBCB E Nonestab
12) BRANCH PIPE / 176.34.009CBCB[62]() Specification : BRANCH PIPE / 176.34.009CBCB E Nonestab
13) BRACKET ASSY / 188.34.016CBCB[62]() Specification : BRACKET ASSY / 188.34.016CBCB E Nonestab
14) BRACKET / 176.34.021CB-1CB[62]() Specification : BRACKET / 176.34.021CB-1CB E Nonestab
15) SHIELD / 176.34.018CBCB[62]() Specification : SHIELD / 176.34.018CBCB E Nonestab
16) REAR SHIELD ASSY / 188.34.018CBCB[62]() Specification : REAR SHIELD ASSY / 188.34.018CBCB E Nonestab
17) SHIELD ASSY / 188.34.020CBCB[62]() Specification : SHIELD ASSY / 188.34.020CBCB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) AIR CLEANER ASSY / 176.34.001CB-3CB[62]() Specification : AIR CLEANER ASSY / 176.34.001CB-3CB E Nonestab
2) AIR CLEANER ASSY / 188.34.001CBCB[62]() Specification : AIR CLEANER ASSY / 188.34.001CBCB E Nonestab
3) TUBE ASSY / 188.34.015CBCB[62]() Specification : TUBE ASSY / 188.34.015CBCB E Nonestab
4) LEFT-HAND VALVE ASSY / 188.34.003CBCB[62]() Specification : LEFT-HAND VALVE ASSY / 188.34.003CBCB E Nonestab
5) RIGHT-HAND VALVE ASSY / 188.34.012CBCB[62]() Specification : RIGHT-HAND VALVE ASSY / 188.34.012CBCB E Nonestab
6) VALVE LH / 176.34.007CB-1[62]() Specification : VALVE LH / 176.34.007CB-1 E Nonestab
7) BRANCH PIPE ASSY / 188.34.005CBCB[62]() Specification : BRANCH PIPE ASSY / 188.34.005CBCB E Nonestab
8) LEFT-HAND BRANCH PIPE ASSY / 188.34.014CBCB[62]() Specification : LEFT-HAND BRANCH PIPE ASSY / 188.34.014CBCB E Nonestab
9) TUBE LEFT HAND / 176.34.003CB-1CB[62]() Specification : TUBE LEFT HAND / 176.34.003CB-1CB E Nonestab
10) TUBE RIGHT-HAND / 172.34.062CB-1CB[62]() Specification : TUBE RIGHT-HAND / 172.34.062CB-1CB E Nonestab
11) BRANCH PIPE / 176.34.006CBCB[62]() Specification : BRANCH PIPE / 176.34.006CBCB E Nonestab
12) BRANCH PIPE / 176.34.009CBCB[62]() Specification : BRANCH PIPE / 176.34.009CBCB E Nonestab
13) BRACKET ASSY / 188.34.016CBCB[62]() Specification : BRACKET ASSY / 188.34.016CBCB E Nonestab
14) BRACKET / 176.34.021CB-1CB[62]() Specification : BRACKET / 176.34.021CB-1CB E Nonestab
15) SHIELD / 176.34.018CBCB[62]() Specification : SHIELD / 176.34.018CBCB E Nonestab
16) REAR SHIELD ASSY / 188.34.018CBCB[62]() Specification : REAR SHIELD ASSY / 188.34.018CBCB E Nonestab
17) SHIELD ASSY / 188.34.020CBCB[62]() Specification : SHIELD ASSY / 188.34.020CBCB E Nonestab
18) LEVER ASSY TO 6206419052[62]() Specification : LEVER ASSY TO DRG NO. 175.63.049CB C Nonestab
19) CLOSING MECHANISM FEED GATE ROTARY CONVEYOR TO 6201028034[62]() Specification : CLOSING MECHANISM FEED GATE ROTARY CONVEYOR TO DRG NO. 172.28.062SB-1SB C Nonestab
20) CARRIER TO 6206203009[62]() Specification : CARRIER TO DRG NO. 172.18.027CB C Nonestab
21) ROD RH ASSY TO 6206419027[62]() Specification : ROD RH ASSY TO DRG NO. 175.63.010CB-1 C Nonestab
22) REDUCER WITH FILTER ASSY TO 6206213074[62]() Specification : REDUCER WITH FILTER ASSY TO DRG. NO. 175.60.080CBCB C Nonestab
23) BELT LINK TO 6206609288[62]() Specification : 6L19-1 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) HYDRO CYCLONE SETTLER ASSY / 175.66.026CB-1CB[62]() Specification : HYDRO CYCLONE SETTLER ASSY / 175.66.026CB-1CB E Nonestab
2) ADAPTER / 52-PT-412C.41-102[62]() Specification : ADAPTER / 52-PT-412C.41-102 E Nonestab
3) AIR ESCAPE VALVE / 527.08.70.0313[62]() Specification : AIR ESCAPE VALVE / 527.08.70.0313 E Nonestab
4) APPLIANCE FOR MEASURING PRESSURE IN GEAR BOX HYDRAULIC CONTROL SYSTEM ASSY / 176.95.002CB-1CB[62]() Specification : APPLIANCE FOR MEASURING PRESSURE IN GEAR BOX HYDRAULIC CONTROL SYSTEM ASSY / 176.95.002CB-1CB E Nonestab
5) APPLIENCE FOR DISMOUNTING THE THROW OUT SPINDLES OF GEAR BOX CLUTCHES / 432.95.110[62]() Specification : APPLIENCE FOR DISMOUNTING THE THROW OUT SPINDLES OF GEAR BOX CLUTCHES / 432.95.110 E Nonestab
6) ARM / 2A46M.CB42-25CB[62]() Specification : ARM / 2A46M.CB42-25CB E Nonestab
7) CONNECTOR / 52-PT-412C.41-105[62]() Specification : CONNECTOR / 52-PT-412C.41-105 E Nonestab
8) DETACHABLE END-PIECE / 175.95.110A[62]() Specification : DETACHABLE END-PIECE / 175.95.110A E Nonestab
9) DEVICE FOR DISMANTLING CONE AND DRIVE WHEEL ASSY. / 434.95.038CB[62]() Specification : DEVICE FOR DISMANTLING CONE AND DRIVE WHEEL ASSY. / 434.95.038CB R Nonestab
10) DEVICE FOR MOUNTING AND REMOVING OF GEAR BOX AS AN ASSEMBLY WITH FINAL DRIVE / 175.95.004CB-1[62]() Specification : DEVICE FOR MOUNTING AND REMOVING OF GEAR BOX AS AN ASSEMBLY WITH FINAL DRIVE / 175.95.004CB-1 E Nonestab
11) DEVICE FOR SETTING THE TORSION ANGLE OF TORSION BAR ASSY. / 175.95.001CB-5[62]() Specification : DEVICE FOR SETTING THE TORSION ANGLE OF TORSION BAR ASSY. / 175.95.001CB-5 E Nonestab
12) FAN / G10.00.20[62]() Specification : FAN / G10.00.20 E Nonestab
13) FIXTURE FOR PRESSING OFF-THE PLANET / 172.95.120CBCB[62]() Specification : FIXTURE FOR PRESSING OFF-THE PLANET / 172.95.120CBCB E Nonestab
14) FLARES CARTRIDGE BELT ASSY / 172.91.273CBCB[62]() Specification : FLARES CARTRIDGE BELT ASSY / 172.91.273CBCB E Nonestab
15) HOSE / 52-PT-412C.CB41-18CB[62]() Specification : HOSE / 52-PT-412C.CB41-18CB E Nonestab
16) OPERATING HOSE ASSY / MTO.1.35.017CBCB[62]() Specification : OPERATING HOSE ASSY / MTO.1.35.017CBCB E Nonestab
17) RACK ASSY. / 172.93.222CBCB[62]() Specification : RACK ASSY. / 172.93.222CBCB E Nonestab
18) SPACER ASSY / 172.95.152CBCB[62]() Specification : SPACER ASSY / 172.95.152CBCB E Nonestab
19) TABLE FOR RINSING BATH / B.MTO.1.39.019CB[62]() Specification : TABLE FOR RINSING BATH / B.MTO.1.39.019CB E Nonestab
20) VALVE-RIGHT HAND / 172.34.059CB-1[62]() Specification : VALVE-RIGHT HAND / 172.34.059CB-1 E Nonestab
21) YOKE ASSY / 54.02.92CB-2CB[62]() Specification : YOKE ASSY / 54.02.92CB-2CB E Nonestab
22) PLUG / 166.26.169[62]() Specification : PLUG / 166.26.169 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LOCK[06]() Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Pulley[06]() Specification : Assemble item C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) OIL TANK FOR TRANSMISSION SYSTEM[06]() Specification : OIL TANK FOR TRANSMISSION SYSTEM / 175.32.087CB-2 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]() Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACE ASSY[06]() Specification : BRACE ASSY / 54.28.772CBCB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) TANK FOR SERVICING OF AIR CLEANER CASSETTE / 175.91.050CB-1[06]() Specification : TANK FOR SERVICING OF AIR CLEANER CASSETTE / 175.91.050CB-1 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MOUNTING OF LEFT HAND SEAT(WITHOUT LINER) / 172.15.002CB -5BCB / W.O.LINER[06]() Specification : MOUNTING OF LEFT HAND SEAT(WITHOUT LINER) / 172.15.002CB -5BCB / W.O.LINER E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MOUNTING OF R.H. SEAT(WITHOUT LINER) / 172.15.103CB –BCB / W.OLINER[06]() Specification : MOUNTING OF R.H. SEAT(WITHOUT LINER) / 172.15.103CB –BCB / W.OLINER E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) GREASE GUN / 155.28.670CB[06]() Specification : GREASE GUN / 155.28.670CB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DISTRIBUTION BOX KP 73-A / 176.70.021CB[18]() Specification : DISTRIBUTION BOX KP 73-A / 176.70.021CB E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FLEXIBLE SHAFT ASSY / GB301- 3802600MLCB[62]() Specification : GB301-3802600MLCB E Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Right hand carrier - 172.62.136[06]() Specification : GOST:4543-71 C Nonestab
2) Left hand carrier - 175.62.137[06]() Specification : GOST 4543-71 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) STARTER ACTUATING UNIT (TWO STAGE) ASSY. DRAWING / PUS.15R.000CB[18]() Specification : STARTER ACTUATING UNIT (TWO STAGE) ASSY. DRAWING / PUS.15R.000CB E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DISC WITH HUB ASSY / 172.50.003CB-BCB[62]() Specification : DISC WITH HUB ASSY / 172.50.003CB-BCB E Nonestab
2) DISC WITH HUB ASSY / 172.50.004CB-BCB[62]() Specification : DISC WITH HUB ASSY / 172.50.004CB-BCB E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Lower Housing[06]() Specification : Lower Housing / 172.70.226CB-2CB E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ASSY VALVE BLEED[06]() Specification : ASSY VALVE BLEED / 172.33.011CB-4CB E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PACKING RING[06]() Specification : PACKING RING / 188.35.007 E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BOOSTER 030 1[62]() Specification : BOOSTER 175.40.030-1 E Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) PACKING COVER[62]() Specification : PACKING COVER E Nonestab
Category :
Grade : Grade III
Size : M
602 SANDHAR COMPONENTS BEHRAMPUR (A Unit of SANDHAR TECHNOLOGIES LTD.)
B-6/20, L.S.C., SAFDARJUNG , NEW DELHI SAFDARJUNG NEW DELHI Delhi
PIN1 : 110029
Phone No. : 4518901
GSTIN : 06AAACS0512J2ZR 		DELS19876D

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086 Description : BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086() Specification : SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PC & CONSISTING OF 29 COMPONENTS AND TO ARDESPECIFICATION NO.ARDE/SPECN/668 DATE DEC'2007 REV.3 DATE NOV.2015 FOR PRE-FRAG 100-120KG C Nonestab
Category : ddp
Grade : 3
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Manufacturing of all types of sheet metal , machined and plastic moulded components for small arms() AS PER DRG. C Not Estab.
2) Blade Foresight Drg. No. PHMK-IV() AS PER DRG. C Not Estab.
3) Pin Firing DS CAT No. 1005-000831 for 9 mm Carbine() AS PER DRG. C Not Estab.
4) Gas Cylinder Cover Moulding Drg. No. 0204-03-02-00-00-001-00DA for JVPC() AS PER DRG. C Not Estab.
5) Plastic Moulded box Drg. No. SK-4745*2() AS PER DRG. C Not Estab.
6) Screw Socket Head DS CAT no. 5305-005081() AS PER DRG. C Not Estab.
7) CARRYING HANDLE MOULDING BLACK DRG. No. CQA(SA) SK-976() AS PER DRG. C Not Estab.
8) CATCH COCKING HANDLE (MOULDING) DRG. No. CQA SK-998() AS PER DRG. C Not Estab.
9) Grip Assy For Rev. MK-III() AS PER DRG. C Not Estab.
10) Sear Safety DS CAT no. 1005-007738() AS PER DRG. C Not Estab.
11) Plate Body (IC) of Rev. MK-III() AS PER DRG. C Not Estab.
12) Guard Hand left & Right 5.56 (Black)() AS PER DRG. C Not Estab.
13) Guard Hand Assy. (Black)() AS PER DRG. C Not Estab.
14) Trigger CQA (SA) SK 454/1/1 R5() AS PER DRG. C Not Estab.
15) Barrel Cover Assy. Drg. No. 0204-03-03-01-12-000-00DA for JVPC() AS PER DRG. C Not Estab.
Category : DDP,DP
Grade : I
Size : L
1) Small Arms Factory
Name Specification Use Status
1) BAND RETAINER TO DS CAT NO 5340 015713[70]() Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION. C Nonestab
2) BODY HOUSING BLANK[70]() Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM. C Nonestab
3) Bracket Foresight[70]() Specification : BRACKET FORESIGHT TO DRG NO. AKC-02/5(IN FINISHED CONDITION FOR AMOGH 5.56MM. C Nonestab
4) BUTT ASSEMBLY FOR RIFLE 5.56 MM[70]() Specification : Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838 Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007. C Nonestab
5) BUTT PLASTIC FOR AKC 14[70]() Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
6) BUTT TO DRG.NO.CQA(SA)SK- 973 DC(I) NO.26953-SA DT.01.10.16 DS CAT NO. 1005-560705[70]() Specification : BUTT TO DRG.NO.CQA(SA)SK- 973 DC(I) NO.26953-SA DT.01.10.16 DS CAT NO. 1005-560705 C Nonestab
7) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]() Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR C Nonestab
8) Catch Cocking Handle Moulding Assy for LMG[70]() Specification : CATCH COCKING HANDLE MOULDING ASSY. DRG.NO.CQA(SA)SK-1275 FOR LMG 5.56MM C Nonestab
9) CHANGE LEVER LEFT FOR CARBINE 5point56MM[70]() Specification : CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM. C Nonestab
10) LEVER CHANGE RIGHT FOR CARBINE 5 point 56MM[70]() Specification : AS PER DRAWING C Nonestab
11) Channel left for Carbine 5 point 56[70]() Specification : AS PER DRG. C Nonestab
12) Channel right for Carbine 5 point 56[70]() Specification : CHANNEL RIGHT TO DRG NO. AKC-03/7BL FOR CARBINE 5.56MM. C Nonestab
13) STUD COCKING HANDLE FOR CARBINE 5 56 MM[70]() Specification : COCKING HANDLE TO DRG NO.AKC-08/8* FOR CARBINE5.56MM IN FINISHED CONDITION. C Nonestab
14) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12[70]() Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 C Nonestab
15) FORE SIGHT IN FINISHED CONDITION FOR CARBINE 5 56MM[70]() Specification : FORE SIGHT DRG NO AKC 01/6 IN FINISHED CONDITION. FOR CARBINE 5.56MM C Nonestab
16) FORE SIGHT 1005 007737 IN FINISHED CONDITION[70]() Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16 C Nonestab
17) GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5 56 IN FINISHED CONDITION[70]() Specification : GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION. C Nonestab
18) GRIP PISTOL TO DS CAT NO 1005 560706[70]() Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011. C Nonestab
19) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775[70]() Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD C Nonestab
20) GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION[70]() Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA , DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDITION. C Nonestab
21) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010[70]() Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010 C Nonestab
22) GUIDE ASSEMBLY 1 FOR CARBINE 5 56MM[70]() Specification : GUIDE ASSEMBLY-1 TO DRG NO.AKC-09/3*. FOR CARBINE 5.56MM. C Nonestab
23) GUIDE ASSEMBLY 2 FOR CARBINE 5 56MM[70]() Specification : GUIDE ASSEMBLY-2 TO DRG NO.AKC 09/2*. FOR CARBINE 5.56MM C Nonestab
24) Guide piston extension for AMOGH 5 56[70]() Specification : GUIDE PISTON EXTENSION TO DRG NO.AKC-02/3*1(IN FINISHED CONDFOR AMOGH 5.56MM. C Nonestab
25) GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION[70]() Specification : GUIDE SPRING RECOIL FRONT ARDE/SK- 2689/110. DS CAT NO-1005-007774.DC(1)26920-SA DT-26.08.16. (IN FINISHED CONDITION). C Nonestab
26) GUIDE SPRING RECOIL REAR for CARBINE 5 56[70]() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Nonestab
27) HOUSING REAR SIGHT FOR CARBINE 5 56MM[01]() Specification : HOUSING REAR SIGHT IC TO DRG NO. AKC-08/1/1 I.C.* FOR CARBINE 5.56MM. C Nonestab
28) LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899[70]() Specification : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 C Nonestab
29) LEVER CLAW FOR ARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : LEVER CLAW TO DRG NO.AKC-13/4 FOR CARBINE 5.56MM IN FINISHED CONDITION C Nonestab
30) LEVER PIN LOCKING IN FINISHED CONDITION[70]() Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293. C Nonestab
31) LOCK RETAINER IN FINISHED CONDITION[70]() Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10. C Nonestab
32) PIN PLUNGER LOCK BUTT FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN PLUNGER LOCK BUTT TO DRG NO.AKC-13/7* FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
33) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56[70]() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Nonestab
34) PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175[70]() Specification : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO.5315-009175.DC(I) NO.26927-SA DT.02.09.16 C Nonestab
35) Pin Grooved Headed for Hammer DS CAT NO 5315 009190[70]() Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190 C Nonestab
36) Pin grooved Headed for Hinge cover for Carbine 5 56[70]() Specification : PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16 C Nonestab
37) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR CARBINE 5 56[70]() Specification : PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO DRG NO. ARDE/SK-2689/132 DS CAT NO. 5315-009189 DC(I) NO.26930-SA DT. 06.09.16. C Nonestab
38) PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56[70]() Specification : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD TO DS CAT NO. 5315-009191 D.C.NO.26501-SA DT. 08.05.2010 IN FINISHED CONDITION. C Nonestab
39) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION C Nonestab
40) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION[70]() Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION. C Nonestab
41) PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN HINGE COVER DRG NO AKC 01/15 FOR CARBINE 5.56MM IN FINISHED CONDITION C Nonestab
42) PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN LEVER CHANGE TO DRG NO.AKC-10/5 FOR CARBINE 5.56MM IN FINISHED CONDITION C Nonestab
43) PIN LOCK BUTTON FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN LOCK BUTTON TO DRG NO.AKC-13/6* FOR CARBINE 5.56MM IN FINISHED CONDITION C Nonestab
44) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56[70]() Specification : PIN LOCK SEAR SAFETY TO DRG.NO- ARDE/SK-3143/44 DS CAT NO.5315-009215 DC(I)NO.26934-SA DT.07.09.16. C Nonestab
45) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Nonestab
46) PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION[70]() Specification : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISH COND. TO DS CAT NO. 5315-009261 DC(I) NO. 26934-SA DT. 07.09.16 C Nonestab
47) Pin straight headless for extractor to DS CAT NO 5315 009195[70]() Specification : PIN STRAIGHT HEADLESS FOR EXTRACTOR TO DRG. NO-ARDE/SK 2689/71. DS CAT NO-5315-009195.DC(I)NO-26930-SA DT-06.09.16 C Nonestab
48) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM[70]() Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION. C Nonestab
49) PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101[70]() Specification : PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101. C Nonestab
50) PISTON EXTENSION BLANK FOR CARBINE 5 56MM[70]() Specification : PISTON EXTENSION BLANK TO DRG NO. AKC-07/01BL*1 FOR CARBINE 5.56MM. C Nonestab
51) PLUNGER DS CAT NO 1005 007901 IN FINISHED CONDITION FOR LMG 5 56[70]() Specification : PLUNGER TO DRG. NO. ARDE SK- 2825/34,DS CAT NO. 1005-007901 DC(I) NO. 26954-SA, DT. 04/10/16 IN FINISHED CONDITION C Nonestab
52) PLUNGER HOD FOR CARBINE 5 56 MM[70]() Specification : PLUNGER HOD TO DRG NO.AKC-08/5 FOR CARBINE5.56MM IN FINISHED CONDITION C Nonestab
53) PLUNGER HOD MOULDING for LMG[70]() Specification : PLUNGER HOD(MOULDING)TO DRG. NO.CQA(SA)SK-982, DS CAT NO. 5340-179455 , DC(I) NO.26578-SA ,DT.04-03-11,CONSISTING INSERT PLUNGER HOD, DS CAT NO. 4933-000770, DC(I) NO. 26950-SA, DT. 27.09.16 C Nonestab
54) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM[70]() Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
55) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION[70]() Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION C Nonestab
56) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56[70]() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Nonestab
57) PLUNGER FOR AMOGH CARBINE 5 56[70]() Specification : PLUNGER TO DRG. NO. ARDE SK 2689/87.IN FINISHED CONDITION DS CAT NO-1005-007827. DC(I)26547-SA,DTD-24.11.2010 C Nonestab
58) SEAR SK 2689/239 SOFT COND.L5[70]() Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26524 SA DT-16.07.10., C Nonestab
59) SEAR AUTO FOR AMOGH CARBINE 5 56[70]() Specification : SEAR AUTO DRG NO AKC 01/11 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
60) SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : SEAR DRG NO AKC 01/10 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
61) SIGHT REAR IC FOR CARBINE 5 56MM[70]() Specification : SIGHT REAR IC TO DRG NO AKC-08/4 I.C.* FOR CARBINE 5.56MM. C Nonestab
62) TRIGGER IN FINISHED CONDITION FOR CARBINE 5 56MM[70]() Specification : TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM C Nonestab
63) BLANK BODY COCKING SLIDE for MAG[37]() Specification : BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G). C Nonestab
64) BLANK FOR BODY COVER FOR MAG 7 62MM[01]() Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G C Nonestab
65) BLANK FOR TRAY AS PER DRG.NO.SKM-864[70]() Specification : BLANK FOR TRAY AS PER DRG.NO.SKM-864 C Nonestab
66) BODY BARREL LOCKING CATCH DS CAT 1005-006830[70]() Specification : AS PER DRG DS CAT 1005-006830 C Nonestab
67) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM[01]() Specification : AS PER DRG. C Nonestab
68) Blank for Body Cover Drg. No. 23055A SKM-902*1[01]() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Nonestab
69) BODY COVER RIGHT HAND AIR VERSION FOR MAG 7 62 MM[70]() Specification : BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002 . C Nonestab
70) BODY LOWER FEED MECH SLIDE DS CAT 1005-000475[70]() Specification : AS PER DRG C Nonestab
71) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION[70]() Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION C Nonestab
72) Body Trigger for MAG[70]() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Nonestab
73) Body Upper Feed Mechanism Slide 1005-006823[70]() Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating C Nonestab
74) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.[70]() Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. C Nonestab
75) BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94[70]() Specification : BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94 C Nonestab
76) PIN CATCH BUFFER BODY[70]() Specification : PIN, CATCH BUFFER BODY TO DS CAT NO. 5315-001531 DC(I) NO. 27020-SA DT- 28.01.17 IN FINISHED CONDITION. C Nonestab
77) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]() Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. C Nonestab
78) CATCH LOCATING SAFETY CATCH for MAG[70]() Specification : CATCH LOCATING SAFETY CATCH DS CAT NO.1005-000613 DC NO. 27107-SA DT- 21.06.17 IN FINISHED CONDITION. C Nonestab
79) CATCH REAR SIGHT CURSOR for MAG[70]() Specification : CATCH REAR SIGHT CURSOR (2P) EACH FOR MAG 7.62MM DS CAT NO. 1005-000434 DC(I) NO. 25292-SA DT- 14.3.2002 IN FINISHED CONDITION. C Nonestab
80) CENTRAL PAWL AXIS for MAG[70]() Specification : CENTRAL PAWL AXIS TO DS CAT NO. 5315-001512 DC(I) NO. 27015-SA DT- 16.01.17 IN FINISHED CONDITION. C Nonestab
81) CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION.[70]() Specification : CLEANING TOOL SA NO. 2 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO. 1005-000768 & 1005-000769 DC NO. 23853-SA DT.17/06/1997 IN FINISHED CONDITION. C Nonestab
82) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.[70]() Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. C Nonestab
83) CLIP for MAG[70]() Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION. C Nonestab
84) COVER for MAG[70]() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Nonestab
85) COVER PLATE ACCESS TO DS CAT NO. 1005-006647 DC(I) NO. 25325-SA DT- 10.4.02 IN FINISHED CONDITION.[70]() Specification : COVER PLATE ACCESS TO DS CAT NO. 1005-006647 DC(I) NO. 25325-SA DT- 10.4.02 IN FINISHED CONDITION. C Nonestab
86) EXTRACTOR SMALL ARMS CARTRIDGE Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016.[01]() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Nonestab
87) FORE SIGHT HOUSING TO DS CANO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.[70]() Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. C Nonestab
88) Bracket Foresight[70]() Specification : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. C Nonestab
89) GRIP HANDLE IN FINISHED CONDITION DS CAT NO.5340-016098 DC(I) NO. 25786-SA DT. 30-06-03[01]() Specification : GRIP HANDLE IN FINISHED CONDITION DS CAT NO.5340-016098 DC(I) NO. 25786-SA DT. 30-06-03 C Nonestab
90) GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION.[70]() Specification : GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION. C Nonestab
91) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.[70]() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Nonestab
92) Guide upper Left for MAG[70]() Specification : .GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 27011-SA DT.14.01.17 IN FINISHED CONDITION. C Nonestab
93) Handle cocking slide for MAG[70]() Specification : HANDLE COCKING SLIDE DS CAT NO.1005 - 006630 DC(I) NO. 27104-SA , DT. 14-06-2017 IN FINISHED CONDITION C Nonestab
94) HANDLE COCKING SLIDE WITHOUT ANODIZING DRG.NO. SKM-1004[70]() Specification : HANDLE COCKING SLIDE WITHOUT ANODIZING DRG.NO. SKM-1004 C Nonestab
95) HOUSING PIVOT for MAG[70]() Specification : HOUSING PIVOT TO DS CAT NO. 1005-000666 DC(I) NO. 26182-SA DT- 03.04.06 IN FINISHED CONDITION. C Nonestab
96) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99[70]() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Nonestab
97) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER[70]() Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04 C Nonestab
98) LEVER EXTRACTOR FOR REVOLVER[70]() Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18. C Nonestab
99) LEVER LOCKING FOR CARBINE 9 MM[70]() Specification : LEVER LOCKING(CISA-633)DS CAT NO-1005-006886 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26900-SA DATED-20-07-2016. C Nonestab
100) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE[70]() Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9 C Nonestab
101) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.[70]() Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94. C Nonestab
102) Pin butt DS CAT No 5315 009110 in finished condition[70]() Specification : PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16 C Nonestab
103) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.[70]() Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. C Nonestab
104) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Nonestab
105) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99[70]() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Nonestab
106) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION[07]() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Nonestab
107) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.[70]() Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. R Nonestab
108) PIN LEVER LOCKING CAP D S CAT NO-5315-002017 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26341-SA DT.01-06-2007[70]() Specification : PIN LEVER LOCKING CAP D S CAT NO-5315-002017 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26341-SA DT.01-06-2007 C Nonestab
109) PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.[70]() Specification : PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16. C Nonestab
110) PIN LOCKING TRIGGER MECH-9MM[70]() Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016 C Nonestab
111) PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001[70]() Specification : PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001 P Nonestab
112) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]() Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE C Nonestab
113) PIN KEEP SPLIT FOR FIRING DEVICE[70]() Specification : PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662). C Nonestab
114) PIN FIRING FOR REVOLVER[70]() Specification : PIN-FIRING DRG.NO-PH-MK-II-1-29 IN FINISHED CONDITION OF 32"REVOLVER MK-III. C Nonestab
115) PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM[70]() Specification : PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16. C Nonestab
116) PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2[70]() Specification : PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2 C Nonestab
117) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]() Specification : AS PER DRG.no. 1005-000977 C Nonestab
118) PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.[70]() Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. C Nonestab
119) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.[70]() Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. C Nonestab
120) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]() Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 C Nonestab
121) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.[70]() Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. C Nonestab
122) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]() Specification : AS PER DRG. C Nonestab
123) PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION[70]() Specification : PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION C Nonestab
124) PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99[70]() Specification : PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99 C Nonestab
125) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM[70]() Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1 C Nonestab
126) Plunger DRG No. 1005-000832[70]() Specification : As per Drg. C Nonestab
127) GRIP ASSY OF REVOLVER MK-III[70]() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D. C Nonestab
128) LEG LEFT FRONT ASSEMBLY REQUIRED FOR MOUNTING TRIPOD 7 62MM MGL4A1 OF MAG GUN[70]() Specification : LEG LEFT FRONT ASSEMBLY TO DRG/DS.CAT.NO.1005-000667 IN FINISHED CONDITION (REQUIRED FOR MOUNTING TRIPOD 7.62MM MGL4A1 OF MAG GUN) C Nonestab
129) LEG REAR ASSY for MAG[70]() Specification : LEG REAR ASSY DS CAT NO. 1005-000674 DC(I) NO. 23511-SA DT- 01.10.96 C Nonestab
130) LEG RIGHT FRONT ASSY for MAG[01]() Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001 C Nonestab
131) LEVER CLAMPING FRONT LEG ASSY for MAG[70]() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Nonestab
132) LEVER CLAMPING REAR LEG ASSY for MAG[70]() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Nonestab
133) LINK LOWER for MAG[70]() Specification : LINK (LOWER) TO DS CAT NO. 1005-000469 DC(I) NO. 25303-SA DT- 23.01.02 IN FINISHED CONDITION WITHOUT HT & PLATING. AS PER DRG C Nonestab
134) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.[70]() Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. C Nonestab
135) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.[70]() Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. C Nonestab
136) LOCATING FLANGE TRIGGER TO DS CAT NO. 1005-000623 DC(I) NO. 25310-SA DT-30.3.02 IN FINISHED CONDITION.[70]() Specification : LOCATING FLANGE TRIGGER TO DS CAT NO. 1005-000623 DC(I) NO. 25310-SA DT-30.3.02 IN FINISHED CONDITION. C Nonestab
137) PIN FIRING for MAG[70]() Specification : PIN FIRING,DS CAT NO.1005-006641 IN FINISHED CONDITION (MATERIAL TO BE ISSUED AGAINST BANK GUARANTEE) MAG 7.62 MM DC(I) NO. 25325-SA, DT.10.04.2002 C Nonestab
138) PIN LOCATING SEAR SPRING for MAG[70]() Specification : PIN LOCATING SEAR SPRING TO DS CAT NO. 5315-001541 DC(I) NO. 27013-SA DT- 14.01.17 IN FINISHED CONDITION. C Nonestab
139) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.[70]() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Nonestab
140) PIN RETAINING HANDLE COCKING SLIDE for MAG[70]() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Nonestab
141) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION[70]() Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION C Nonestab
142) PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION.[70]() Specification : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION. C Nonestab
143) PIN STRAIGHT HEADED EJECTOR for MAG[70]() Specification : DS CAT NO. 5315-001521 DC(I) NO. 25359-SA DT. 10.05.2002 (WITH SAF MATERIAL) C Nonestab
144) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG[70]() Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION. C Nonestab
145) PIN STRAIGHT HEADLESS FRONT SIGHT BAND for MAG[70]() Specification : PIN STRAIGHT HEADLESS (FRONT SIGHT BAND)TO DS CAT NO. 5315-001500 DC(I) NO. 25727-SA DT- 19.4.03 IN FINISHED CONDITION. C Nonestab
146) PIN STRAIGHT HEADLESS RETAINING SLEEVE for MAG[70]() Specification : PIN STRAIGHT HEADLESS (RETAINING SLEEVE) TO DS CAT NO. 5315-001536 DC(I) NO. 27012-SA DT- 14.1.17 IN FINISHED CONDITION. . C Nonestab
147) PIN SEAR AND SEAR SPRING for MAG[70]() Specification : PIN, SEAR AND SEAR SPRING TO DS CAT NO. 5315-001499 DC NO. 25601-SA DT- 27.11.02 IN FINISHED CONDITION. C Nonestab
148) Pin Lever Catch Magazine for JVPC[70]() Specification : Pin Lever Catch Magazine for JVPC 5.56MM Drg. No. 0204-03-02-02-18-020-00DA C Nonestab
149) Hand Guard Assembly for JVPC[70]() Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw C Nonestab
150) Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD[70]() Specification : Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD C Nonestab
151) Striker Mechanism Housing Modified[70]() Specification : Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting C Nonestab
152) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION[70]() Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION C Nonestab
Category : DDP,DP
Grade : I
Size :
1) Rifle Factory Ishapur
Name Specification Use Status
1) POLYMER MAGAZINE ASSY. FOR 7.62MM ASSAULT RIFLE. (PLASTIC MOULDED)() AS PER DRAWING. C Not Estab.
2) GRIP PISTOL FOR RIFLE 5.56MM INSAS FOLDING BUTT (PLASTIC MOULDED)() AS PER DRAWING. C Not Estab.
3) BLANK FOR STUD CHANGE LEVER FOR RIFLE 5.56MM INSAS.() AS PER DRAWING. C Not Estab.
4) WHEEL LOCK FOR RIFLE 5.56MM INSAS. () AS PER DRAWING. C Not Estab.
5) SPRING SEAR FOR 9MM AUTO PISTOL 1A. (SHEET METAL COMPONENT)() AS PER DRAWING. C Not Estab.
6) FIRING ATTACHMENT BLANK AMMUNITION FOR RIFLE 5.56MM INSAS.() AS PER DRAWING. C Not Estab.
7) TRIGGER HOUSING DIE CASTING FOR PUMP ACTION GUN.() AS PER DRAWING. C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) BLANK FOR STUD CHANGE LEVER FOR RIFLE 5.56MM INSAS.[79]() Specification : AS PER DRAWIING C Nonestab
2) FIRING ATTACHMENT BLANK AMMUNITION FOR RIFLE 5.56MM INSAS.[79]() Specification : AS PER DRAWING C Nonestab
3) WHEEL LOCK FOR RIFLE 5.56MM INSAS.[79]() Specification : AS PER DRAWING C Nonestab
4) ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTESHEET NO.1).[70]() Specification : AS PER DRAWING C Nonestab
5) PIN FIRING FOR 9MM AUTO PISTOL 1A.[70]() Specification : AS PER DRAWING C Nonestab
6) PLATFORM MAGAZINE (MODIFIED) TO DRG. NO. CISA-640,IS: 617-1994 DESIGNATION 4600 OR 4635.[70]() Specification : AS PER DRAWING C Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) PRESSURE DIE CASTING OF BODY TNPO-170A[70]() Specification : PRESSURE DIE CASTING OF BODY TNPO-170A, DRG. No. B-26/DC/8020251/173 M1 R Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) PRESSURE DIE CASTING OF BOTTOM TNPO-170A[70]() Specification : PRESSURE DIE CASTING OF BOTTOM TNPO-170A, DRG. No. B-26/DC/8040080/174 M3 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Plastic Antique Tip Black [21]() As per Drawing number CFS/SK, dated 30/04/2011 and sample held in custody of OCFS. R Nonestab
Category : ddp
Grade : Grade II
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) TRIGGER TO DRG. NO. IQX-316 IN F/C FOR FMC M-605 DC NO. 36997-A DT. 25.01.2005[63]() Specification : AS PER DRAWING C Nonestab
2) HEAD SAFETY FOR FMC M-605 EMPTY TO DRG NO. IQX-311 IN F/C DC. NO.35828-A dt. 18.10.94[63]() Specification : AS PER DRAWING C Nonestab
3) HEAD FLASH IGNITER TO DRG. NO. IQX-306 IN F/C FOR FMC DC. NO. 35573-A DT. 02.09.93[63]() Specification : AS PER DRAWING C Nonestab
4) PLUG TO DRG. NO. IQX-313 FOR FUZE MINE COMBINATION (F/C)[63]() Specification : AS PER SPECIFICATIONS C Nonestab
5) HEAD FOR FUZE MINE COMB. M-605 EMPTY TO DRG. NO. IQX-310 IN F/C DC. NO. 36997-A DT. 25.01.2005[63]() Specification : AS PER DRG. C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) CAP TO DRG. NO. bw8.635.541 (GSF SK. NO. TF-001) FOR Fz A670 IN FINISHED CONDITION[63]() Specification : CAP TO DRG. NO. bw8.635.541 (GSF SK. NO. TF-001) FOR Fz A670 IN FINISHED CONDITION C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83[70]() Specification : PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) BODY FOR TNPO 160[70]() Specification : BODY DRG. NO. AU.6.110.055 FOR TNPO-160 C Nonestab
2) SET OF TWO COMPONENTS CONSISTING OF BODY AND HOLDER[70]() Specification : SET OF 2 COMPONENTS CONSISTING OF BODY DRG. NO. AU8.020.387 AND HOLDER TO DRG. NO. AU8.636.448 (FOR TNPA-65A) C Nonestab
Category : p
Grade : Grade II
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) PISTON (MODIFIED) FOR 7.62 ASSAULT RIFLE (GHAATAK).[70]() Specification : PISTON (MODIFIED), DRG. NO. AR/07/2-RFI FOR 7.62 ASSAULT RIFLE (GHAATAK). C Nonestab
Category : p
Grade : Grade II
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) PISTON (MODIFIED) FOR 7.62 ASSAULT RIFLE (GHAATAK).[70]() Specification : PISTON (MODIFIED), DRG. NO. AR/07/2-RFI FOR 7.62 ASSAULT RIFLE (GHAATAK). C Nonestab
2) PLUNGER FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO.AR/01/26[70]() Specification : PLUNGER FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO.AR/01/26 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) PLATE BUTT FOR 30-06 SPORTING RIFLE [70]() Specification : PLATE BUTT TO DRG.NO.TSP-408(DC/RFI/NO.08C/030/08)FOR "30-06"SPORTING RIFLE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) TOWING RING 20MM ID[21]() Specification : AS PER SPECIFICATION C Nonestab
Category : p
Grade : Grade II
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]() Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02 R Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]() Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02 R Nonestab
2) BLANK FOR BODY CASTING FOR 84 MM TPT[61]() Specification : AS PER DRG.& SPECIFICATION R Nonestab
3) BLANKS FOR BODY C 1946 H[62]() Specification : BLANKS FOR BODY TO GSF DRG. NO. C-1946H DT. 25/04/17 R Nonestab
Category : p
Grade : Grade I
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) SPACER RING TO CQA[A] SEALED DRG.NO. 04-749-130222-03.4E[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]() Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 2031 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 2023 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP REAR TO DRG NO 33P 3023[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SHIELD FRONT TO DRG NO 33P 1105[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP REAR TO DRG NO 33P 3023[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Base Plate for Shell 105mm IFG HE() Specification : BASE PLATE TO DRG. NO. ISX-384(FOR SHELL 105MM IFG HE) C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Plug 52mm() Specification : Drg. No. ISX-377 with DC No. 36785-A C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE_9911358269[99]() Specification : ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878-A DTD. 20/12/94 C Nonestab
Category : ddp
Grade : Grade II
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]() Specification : SPACER TO DRG.NO.TRD-2-2-2273. C Nonestab
Category : ddp
Grade : Grade II
Size : L
1) Opto Electronic Factory
Name Specification Use Status
1) PR DIE CASTING COVER TO DRG NO B-35/DC/8040118/339 (LF 7513533901)[75]() Specification : PR DIE CASTING COVER TO DRG NO B-35/DC/8040118/339 (LF 7513533901) C Estab
2) DIE TOOLING COVER DC 339 LF 7553533900[75]() Specification : DIE/TOOLING COVER DC/339 (LF 7553533900) C Estab
Category : p
Grade : Grade I
Size : L
1) Opto Electronic Factory
Name Specification Use Status
1) DIE CASTING HOLDER LF NO 7510129001[75]() Specification : DIE CASTING HOLDER LF NO 7510129001 C Estab
2) DIE TOOLING FOR HOLDER LF NO 7550129001[75]() Specification : DIE TOOLING FOR HOLDER LF NO 7550129001 C Estab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) CAP TO OFAJ DRG NO. FS-2498B ( WITHOUT SURFACE TREATMENT)[00]() Specification : CAP TO OFAJ DRG NO. FS-2498B ( WITHOUT SURFACE TREATMENT) C Estab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Nonestab
Category : p
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) LOCK[06]() Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1 C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) Bracket Module Containing:- A) Bracket RHS to Drg.No.1403-01-01-09RHS-08Nos. B) Bracket LHS to Drg.No.1403-01-01-09LHS-08Nos.[--]() Specification : AS PER DRG C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) SKIRT RING TO OFAJ DRG. NO. FS 517-A.[00]() Specification : SKIRT RING TO OFAJ DRG. NO. FS 517-A. C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ROTOR HOLDERTO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.[00]() Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI. C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ROTOR HOLDER TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI[00]() Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) Handle with Handle Clip for Box C-53A[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
2) CARRYING LINK[99]() Specification : DRG.NO OFB/C/1540 E Nonestab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION E Nonestab
5) BOTTOM CORNER PIECE FOR BOX C-53[99]() Specification : AS PER O.F.BHUSAWAL DRAWING E Nonestab
6) CATCH[99]() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. E Nonestab
7) BRACKET A-1 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
8) BRACKET A-2 FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
9) CENTER PARTITION FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
10) BOTTOM FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
11) TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
12) HINGE - AS PER DRG. NO. OFB/C/1565[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
13) Hinge[99]() Specification : Drg.No. OFB/C/1410-A E Nonestab
14) Bracket B-2 for Box C-53 A[99]() Specification : As per O.F.Bhusawal Drawing/Specification E Nonestab
15) ENGAGING PLATE FOR BOXH2A[99]() Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718. E Nonestab
16) BOTTOM SUPPORT PIECE FOR BOX C-53A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
17) BRACKET CARTRIDGE REAR FOR BOX C53[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
18) BRACKET FOR AMMN. BOX SM 601C[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
19) PIECE PACKING FOR BOX SM 601[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
20) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
21) CHANNEL - FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION C Nonestab
22) LID CORNER PIECE FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
23) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
24) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]() Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969 E Nonestab
25) BRACKET CARTRIDGE FRONT FOR BOX C-53A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
26) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 E Nonestab
27) PIECE PACKING `A'[99]() Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820 E Nonestab
28) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 E Nonestab
29) BRACKET END FOR SHELL FOR BOX C-53A[99]() Specification : AS PER DRG. NO. OFB/C/1477 E Nonestab
30) BRACKET B-1 FOR BOX C-53A[99]() Specification : AS PER OFB DRG NO. OFB/C/1487 & ISV 2049 E Nonestab
Category : p
Grade : Grade III
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]() Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E. C Nonestab
Category : p
Grade : Grade III
Size : L
603 PACKWELL PAPER TUBE INDUSTRIES
PLOT NO. 1226-1227 HSIIDC INDUSTRIAL ESTATE RAI (SONEPAT) Haryana
PIN1 : 131029
Phone No. : 8199991615
GSTIN : 06AABFP6308D1ZN 		DELP09419E

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER LAMINATED GR3 0 65 TO 0 73MM 1410010084 Description : PAPER LAMINATED GR3 0 65 TO 0 73MM 1410010084() Specification : PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CONTAINER 12-B/L FOR 40MM L/70, PFFC (9911350355)() DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-A E Established
2) PAPER LAMINATED (1410017676)() GR. 2, 0.45 TO 0.53 MM R Established
3) PAPER LAMINATED (1410010084)() GR. 3, 0.65 TO 0.73 MM R Established
4) PAPER LAMINATED (1418947290)() GR. 3, 102 MM R Established
5) PAPER LAMINATED (1410017170)() GR. 1, 60.96/91.44 MM R Established
6) PAPER LAMINATED (1410017178)() GR. 1, 0.25 TO 0.33 MM R Established
Category : P
Grade : I
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PAPER LAMINATED GR III WIDTH 127MM (1410010078)[14]() Specification : PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002 R Estab
2) PAPER LAMINATED 0.9 TO 1MM THICK (1410017166)[14]() Specification : PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002. R Estab
3) PAPER LAMINATED GRADE I WIDTH 130MM (1410017165)[14]() Specification : PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002. R Estab
4) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515[14]() Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011. R Estab
5) MILL BOARD 787.4X558.8X1.25MM THICK (1421203771)[14]() Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm. R Estab
6) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)[14]() Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA R Estab
7) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313[14]() Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16 R Estab
Category : P
Grade : I
Size :
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313 Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313() Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16 C Nonestab
2) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178 Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178() Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014. C Nonestab
3) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676 Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676() Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014. C Nonestab
4) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515 Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515() Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011. C Nonestab
5) GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822 Description : GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822() Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3 C Nonestab
6) PAPER BOARD CORRUGATED LF 1411817752 Description : PAPER BOARD CORRUGATED LF 1411817752() Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK. C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6584113807 LAMINATED PAPER CONT 120FSAPDS MKII[65]() Specification : LAMINATED PAPER CONTAINER FOR 120MM FSAPDS MK-II TO ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6581233026 END CAP FOR CONTAINER 40A TO DRG PT NO ISV 1123 SHEET STRIP TO SPECN NO IS 1079 2017 OR IS 513 2008 OR BS 1449 PT 381968 CS4 OR BS 1449 PT 3A 1964 HS4A[65]() Specification : END CAP FOR CONTAINER 40A TO DRG.PT.NO.ISV 1123 SHEET/STRIP TO SPECN. NO.IS 1079:2017 OR IS 513:2008 OR BS 1449 PT 381968-CS4 OR BS 1449 PT 3A-1964-HS4A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6584113920 LAMINATED PAPER CONTAINER FOR 120MM HESH DRG NO 1006 05 15 00 00 000 44TA[65]() Specification : LAMINATED PAPER CONTAINER FOR 120MM HESH.DRG NO.:1006 05 15 00 00 000 44TA. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Paper Liner for Packing 68mm Arrow Charges Description : Paper Liner for Packing 68mm Arrow Charges() Specification : PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C. R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) INSERT TO DRG.NO.4-24929/3 K33/040 Description : INSERT TO DRG.NO.4-24929/3 K33/040() Specification : INSERT TO DRG.NO.4-24929/3 K33/040 DC NO.36875-A, dt.27.12.02.PART DRG NO.TUBE TO DRG NO 4-24929/3RK33/017 DC NO.36891-A Dtd.05-04-03,TUBE TO Drg No 4-24929/3RK33 /019 DC No 34147-A Dt.04.06.87 C Estab
2) CYLINDER TO DRG.NO.BL/CD/CC-130/035 Description : CYLINDER TO DRG.NO.BL/CD/CC-130/035() Specification : CYLINDER TO DRG.NO.BL/CD/CC-130/035DT.16.04.2001.(REF.DRG.NO:3-022483/54-bH-482/13, DC NO:36134-A, DT.04.07.96 NOTE:TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE:LENTH:50MMx ID:115MM. C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PAPER KRAFT AMMUNITION[14]() Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-017: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - R Nonestab
2) Paper Liner for Packing 68mm Arrow Charges[14]() Specification : PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C. R Nonestab
3) Piece Packing Mill Board[25]() Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0. R Nonestab
4) PAPER WRAPPING WAXED CRAFT AMMUN[14]() Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05-2013 REV.NO 4, DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG. R Nonestab
5) PAPER WHITE FINE AMMUN[14]() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Nonestab
6) PAPER WASHER GLAZED BOARD[64]() Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. . R Nonestab
7) PAPER CORRUGATED AMMUNITION[14]() Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4. R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) AMMUNITION CONTAINER 22 B[65]() Specification : CQA(A) 2805 C Nonestab
Category : p
Grade : Grade III
Size : S
604 SUPREME PLASTICIZERS
PLOT NO. 115-C, BELAGOLA INDUSTRIAL AREA, METAGALLI MYSORE KARNATAKA
PIN1 : 570016
Phone No. : 0821-2582907, 2582934, Mob. 9845114149, 9845170909
GSTIN : 29AAEFS4895F1ZP 		BLRS15584C

Download 		1) Cordite Factory Arvankadu
Name Specification Use Status
1) DI-ETHYL PHTHALATE() IS 14421-1997 R Estab.
Category : DP
Grade : II
Size : S
605 Mistral Solutions Pvt Ltd
No. 60, ‘Adarsh Regent’ , Domlur Extension 100 Feet Ring Road Bangalore Karnataka
PIN1 : 560071
Phone No. : 9900182049 		AABCM8832C

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6191700214 INTEGRATED TELEMETRY MODULE WITH 2 W TRANSMITTER AND IMU SENSOR Description : 6191700214 INTEGRATED TELEMETRY MODULE WITH 2 W TRANSMITTER AND IMU SENSOR() Specification : SPECIFICATION NO ARDE/NAVAL/ITM/2020/01 C Nonestab
Category : p
Grade : 3
Size : S
606 Dhruv Containers Pvt. Ltd.
PLOT NO. 27/A, NAGALWADI, NEAR MIDC INDUSTRIAL AREA, HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 645354
GSTIN : 27AABCD3717B1Z6 		NGPDO0328G

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
2) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
3) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
4) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
5) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
6) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
7) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
Category : DP
Grade : I,II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) Package for Tail Unit for 450 Kg HS 40/No LD Momb (RTU-2231) () As per Drg. & Specification C Not Established
Category : DP
Grade : I,II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Aluminium Container SER[25]() Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020. R Nonestab
2) Cylinder 12 A Steel for Ammunition Container Assembly 117 A[14]() Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428. R Nonestab
3) Metallic Container For Charge 9[25]() Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94. R Nonestab
4) METALLIC CONTAINER M4A2 SER[25]() Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) BOX-C 27-A (SER)TIN PLATE[65]() Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) BOX C 18A STEEL[42]() Specification : SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A R Nonestab
2) BOX G 70 STEEL[42]() Specification : AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) CYLINDER 443 MK1[65]() Specification : CYLINDER 443 MK1/L GALVANISED STEEL SHEET TYPE DEEP DRAWING DESIGNATION GPD TO SPECN. IS : 277-2018 AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC. R Nonestab
Category :
Grade : Grade III
Size : S
607 STAR WIRE (INDIA) LIMITED
35 LINK ROAD , 2ND FLOOR, LAJPAT NAGAR-III NEW DELHI NEW DELHI
PIN1 : 110024
Phone No. : 011-29832650,29832651, 09350150755
GSTIN : 06AAECS1124Q1Z8 		CALT00276D

Download 		1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) RHA PLATE SIZES : (1) 600MMX600MMX25MM (2) 1000MMX1000MMX100MM() DEF.STANDARD 95-13 ISSUE NO.2 AND 3 E NOT ESTAB.
2) STEEL ROD DIA 10 MM TO 300 MM () ASTM, BS /GOST/IS/EN/DIN/SS/ALLOY STEEL R Non Established
Category : DP
Grade : I
Size : M
1) Ordnance Factory Medak
Name Specification Use Status
1) TRACK ASSEMBLY() 675-35-CB9 C Estab
2) ROAD WHEEL ARM WITH SOLID RUBBER TYRE() 675-33-CD104 C Not Estab
3) STEEL MELTING, FOUNDRY WORK AND CASTING JOBS() As per drawing C Not Estab
Category : P
Grade : II
Size : L
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) All Steel Square Bar Description : All Steel Square Bar() Specification : as per G C F requirement/specification P Estab
2) STEEL SQR 65MM STA 59A Description : STEEL SQR 65MM STA 59A() Specification : ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SU P Estab
3) Carbon & Alloy Steel Billets, Blooms, RCS, Rounds, Hexagonals, Wire Rods. Description : Carbon & Alloy Steel Billets, Blooms, RCS, Rounds, Hexagonals, Wire Rods.() Specification : IS, BS,/EN, JIS, DIN, GOST, SAE, AISI, ASTM P Estab
Category : p
Grade : 3
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) ROUND HOT ROLLED AND ANNEALED CONDITION DIA 16 x length 3000mm TO 0412500016 Description : ROUND HOT ROLLED AND ANNEALED CONDITION DIA 16 x length 3000mm TO 0412500016() Specification : 20X2H4A(DIA.16) R Estab
2) 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500070 Description : 20X2H4A GOST 4543 71 HOT ROLLED FORGEABLE QUALITY STEEL IN ANNEALED CONDITION TO 0412500070() Specification : 20X2H4A(DIA.70) R Estab
Category : p
Grade : 2
Size : M
608 TRACTORS AND FARM EQUIPMENT LIMITED
Plot No. 10-12, INDL. Area II, CMDA INDL. Complex Maraimalai Nagar, Chengalpattu District Tamilnadu
PIN1 : 603209
Phone No. : 9940184454 		CHET00112A

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Battery 12V 180AH Fully Charged Description : Battery 12V 180AH Fully Charged() Specification : BATTERY SMF 12V,180AH FULLY CHARGED.AMARARAJA, PART NO.264354109903-V1 ALTERNATE TAFE BATTERY PART NO.2643-5410-9903- TAFE(Ref Drg No. TAFEPSD-12V180Ah(VFJ-01)) FOR LPTA 715 BS-III VEHICLES C Estab
Category : p
Grade : 3
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Battery F8217800 Description : Battery F8217800() Specification : BATTERY MHD1300,12V,130AH,BS-3 BATTERY MHD-1300 12V,130 AH,OR BATTERY EXIDE MF120L,MK-IV, BS-III VEHICLE PART NO.F8217800-HASE.1 ALTERNATE 12 V 130 AH BATTERY TO PT NO.F2X01300-HASH MAKE TAFE BRAND NAME AMCO C Estab
Category : p
Grade : 3
Size : L
609 DEVYANI ENTERPRISES
Sr. No. 258, Behind MRF Tyre, Marunji Road, Mukai Nagar,At/P Hinjawadi, Tal. Mulshi Dist. Pune, Maharashtra
PIN1 : 411057
Phone No. : +91 8237107007
GSTIN : 27AAJFD6314K1ZA 		APGPP4029P

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942() DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942 C Not Estab.
2) PLASTIC INDEX DISC SHOT NO.1 FOR CARTG SA 12 BORE IN YELLOW COLOUR AS PER DRG.NO.AFK/SK-2888() DRG.NO.AFK/SK-2888 C Not Estab.
3) CONTAINER TO DRG NO ARDE-1933 DET NO 4, PT.NO.ITV 170 SPECN CQA (A) 2322() CQA (A) 2322 C Not Estab.
Category : P
Grade : III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TRI PLASTIC TUBE FOR SA 12 BORE 70M[21]() Specification : DRG. NO. AFK/SK-563-08 R Nonestab
2) TRIMMED PLASTIC TUBE[21]() Specification : DRG NO AFK/SK-564-08 R Nonestab
Category : P
Grade : III
Size :
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : P
Grade : III
Size :
610 BEL TECH EXPORTS (INDIA) PVT. LTD.
402A, EROS CORPORATE TOWER, NEHRU PLACE NEW DELHI NEW DELHI
PIN1 : 110019
Phone No. : 011-41660501
GSTIN : 06AADCB7229A1Z5 		DELB10867D

Download 		1) Opto Electronic Factory

[Deemed Registration]
Name Specification Use Status
1) Opto Electronics Products[As per OLF specifications]() As per OLF specifications C Estab.
2) Upgradation of Opto Electronics Products[As per OLF specifications]() As per OLF specifications C Estab.
Category : S
Grade : III
Size : S
611 PRIYA PRECI-COMP PVT. LTD.
Plot No D-15, MIDC Industrial Area Hingna Nagpur Maharashtra
PIN1 : 440028
Phone No. : 234811
GSTIN : 27AABCP0934A1ZZ 		NGPP00696D

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT-551 (9911357918)() DRG NO.4103 408/DRG.NO.TRD-2-2-2294 C Nonestab
2) BALLISTIC CAP ASSY 5209 540 FOR 551 [9911357815]() DRG NO.5209 540 C Nonestab
3) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358054)() SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO. TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ) C Nonestab
4) LINER SCREW DRG.NO. TRD-1-2-2321 (9911357822)() DRG.NO.TRD-1-2-2321./DRG.NO. 5209558 C Nonestab
5) LOCK WASHER JZE-2.55 HEAT-551 (9911357867)() DRG.NO. TRD-1-2-2269 C Nonestab
6) PARTITION TRD-1-2-2279 (9911357819)() DRG.NO. TRD-1-2-2279 FOR 84MM HEAT-551 C Nonestab
7) PLUNGER BLANK FOR HEAT-551 (9911357919)() DRG.NO. 6417 888/DRG.NO. TRD-1-2-2293 C Nonestab
8) SLIDING RING FOR 84MM HEAT-511 (9911357851)() DRG.NO. TRD-1-2-2264 C Nonestab
9) SLOTTED CHEESE HEAD SCREW 2.5X5 (9911357866)() DRG.NO. TRD-1-2-2265 C Nonestab
10) SPACER TO DRG.NO.TRD-2-2-2273 (9911357855)() DRG.NO. TRD-2-2-2273 C Nonestab
11) SUPPORTING RING (9911357861) () DRG.NO. TRD-2-2-2272 C Nonestab
12) WARHEAD BODY ASSY. 3074 310 FOR 551 (9911357816)() WARHEAD BODY ASSEMBLY TO DRG NO.3074310 C Nonestab
13) TRACER BODY DRG NO.F1334-154780-D (9911334357)() DRG NO. F-1334-154780-D, DC-36534-A DT.6/3/99 C Nonestab
14) STABILIZING TUBE F1301-026223-D (9911334347)() DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN: F-1301-901480-C DT.30/6/78 C Nonestab
15) PROJECTILE TPT FFV-65 W/O TRACER (9911332884)() 84MM TPT PROJECTILE FFV-65 (W/O TRACER-56D) TO DRG. NO F1301-047300 R DC NO. 36598-A DT 23/09/99 C Nonestab
16) ALUMINIUM DISC, THICK .05 MM, DIA 10MM (9911357960)() ALUMINIUM (DISC) COVER THICKNESS = 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93 C Nonestab
17) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)() SHELL BODY BLANK (INTERNAL OPERATION)TO O.F.KHAMARIA DRG NO.TRD-839 (L) C Nonestab
18) CAP AND BOTTOM SPECN F1301-905060-P (9911350158)() CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 &BOTTOM TO DRG NO F1301-029650-EDC NO. 36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91 C Nonestab
19) BODY ASSY-4-26941-060 FOR (81MM SMK) (9911355970)() BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87 C Nonestab
20) PLUG LAUNCHER PED 902-01-401 (9911356473)() PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401DC-17988-W DT. 20-06-1994. SPECN.:-IND/ME/914 (PROV) DC-3496-ME DT. 06-02-98 GRADE C OR D HARDNESS 55 TO 70 C Nonestab
21) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)() TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY)TO DRG PT NO. IQX-69GE DC NO. 36650-A DT. 26/2/00 SPECN:- F-1301-910540-K (CQA-0910) DC36613-A DT 11/11/99 C Nonestab
22) SAFETY LOCK ASSY -042-512 CB (9911356455)() SAFETY LOCK ASSEMBLY TO DRG NO. bw6-042-512-C6 DC NO -34241-A DT 24/9/87 C Estab
Category : DDP,DP
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BANGALORE TORPEDO SECT 38MM 2M EMPT (6430200100)[64]() Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91 C Estab
2) CARTG PERCN PRIMARY 011200000000 LF 9911353312[99]() Specification : CARTG PERCEN PRIMARY FOR CLUSTER BOMB (EMPTY ASSY)TO DRG.NO.0112 00 00 00 00 R.NO.2 DT.15-6-96. SPECN:- ARDE/SPECN/380. C Estab
3) AFT CLOSURE INSULATOR (HEAT-551) (9911357864)[99]() Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243. C Estab
4) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]() Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242. C Estab
5) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921 )[99]() Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247. C Estab
Category : ddp
Grade : Grade III
Size :
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]() Specification : CQA (A) 2316 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]() Specification : SPECN. NO. CQA(A) 0917 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM[65]() Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC[63]() Specification : PRIMER ELECTRIC 1A/L EMPTY C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]() Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3. C Nonestab
2) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]() Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354[99]() Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SELF TAPPING SCREW DRG 121932.[99]() Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Nonestab
2) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]() Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932 C Nonestab
3) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]() Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0 C Nonestab
4) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385[99]() Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a) C Nonestab
5) PYRO DELAY TUBE EMPTY LF 9911358384[99]() Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a) C Nonestab
6) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]() Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/ C Nonestab
7) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]() Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/ MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.[63]() Specification : NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) VALVE PART NO 404038806 LF 9911358407 Description : VALVE PART NO 404038806 LF 9911358407() Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) EMPTY CANISTER ASSEMBLY FOR M2A2[62]() Specification : EMPTY CANISTER ASSEMBLY FOR M2A2. 1)CANISTER WITH TUBE ASSY. DRG. NO. 2439A12002. QTY.:1NO.DC 36773-A DT.10-8-01 2) DISC CLOSSING DRG.NO.2439A30003.QTY.:1NO.DC 36773-A DT.10-8-01 3) SLEEVE DRG.NO.2439A12007.QTY.:1 NO.DC 36773-A DT C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) NOTCHED CLOSE COIL[60]() Specification : NOTCHED CLOSE COIL (AFK/DEV-12) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6043000122 ADAPTER TUBE ASSY 81MM PWP, ITV 12A Description : 6043000122 ADAPTER TUBE ASSY 81MM PWP, ITV 12A() Specification : SPECN. NO. CQA(A) 2335 C Estab
2) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY Description : 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY() Specification : SPECN. NO. CQA(A) 0917 C Estab
3) 6330130100 FZ 117 DA MK 20 E WITH CAP Description : 6330130100 FZ 117 DA MK 20 E WITH CAP() Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3. C Estab
4) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE Description : 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE() Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE. C Estab
5) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT Description : 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT() Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04 C Estab
6) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC Description : 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC() Specification : PRIMER ELECTRIC 1A/L EMPTY C Estab
7) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM Description : 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM() Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) CASE: DRG.9-04367/9- -104/ 38.310. 032 Description : CASE: DRG.9-04367/9- -104/ 38.310. 032() Specification : DRG.9-04367/9- -104/ 38.310. 032, DC.NO.36309-A, DT.14.07.97. C Estab
2) SLEEVE:DRG.9-04367/9- -104/ 38.316 Description : SLEEVE:DRG.9-04367/9- -104/ 38.316() Specification : DRG.9-04367/9- -104/ 38.316 .101,DC.NO.36309-A, DT.14.07.97. C Estab
3) CAP: DRG.9-04367/9- -104/ 38.320. 262 Description : CAP: DRG.9-04367/9- -104/ 38.320. 262() Specification : DRG.9-04367/9- -104/ 38.320. 262-DC.NO.36309-A, DT-14.07.97. C Estab
4) CUP: DRG.9-04367/9- -104/ 38.350. 189 Description : CUP: DRG.9-04367/9- -104/ 38.350. 189() Specification : DRG.9-04367/9- -104/ 38.350. 189,DC.NO-36309-A,DT.14.07.97 C Estab
5) PRIMER ELECTRIC IA/L/EMPTY Description : PRIMER ELECTRIC IA/L/EMPTY() Specification : CQA(A) DRG. PART NO. IQX 46GE, DC NO.36662-A, DT.23.03.2000. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) SLIDE SHOE TO OFAJ DRAWING NO FS 3024[00]() Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Knife Bayonet Assembly Drg No SK 6552 TE[70]() Specification : Knife-Bayonet Assembly Drg No. SK- 6552/ TE C Nonestab
Category : p
Grade : 3
Size : S
612 ASHOK STEEL INDUSTRIES
G.T. ROAD, SIRHIND SIDE, VILL. AJNALI, MANDI GOBINDGARH, PUNJAB
PIN1 : 147301
Phone No. : 01765-255042, 258159 FAX: 01765-507059
GSTIN : 03AABFA9060F1ZX 		PTLA11528G

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) STEEL STRIP 80X3.56MM IS-513 DD CR (0122223036)() STEEL STRIP COLD ROLLED CLOSED ANNEALED BRIGHT FINISHED 3.56 (+0.10/-0.00) MM THICK X 80 +/-0.25 MM WIDE IN LENGTH OF 2 MTRS. TO SPECN:- IS-513:2008 (FIFTH REVISION) GRADE DD TEMPER 5 (ANNEALED) R NOT ESTABLISHED
2) STEEL STRIP 82X0.8MM BS1449/IS513 DD (0121060266)() STEEL STRIP 82+/-0.5 MM WIDE X 0.8+/-0.03 MM THICK TO SPECN:IS-513- TYPE-DD OR BS-1449-PT-I-CS-3 SEC-2 R NOT ESTABLISHED
3) STEEL STRIP 85X2.0MM IS-513/BS1449 (0101061530)() STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) COND. MAX. UTS 390 M R NOT ESTABLISHED
4) STEEL STRIP 100X.5MM/26BG IS513 CR (0133090563)() MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISH TO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLL SHOULD BE BETWEEN 50 KG TO 100 KG R NOT ESTABLISHED
5) STEEL STRIP 200X1.1MM IS513/BS1449 (0101063337)() STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3, CS OR CR IN ANNEALED SKIN PASSED CONDITION MAXIMUM UTS OF 360 MPa. IN STRAIGHT LENGTH OF 3000 MM +/-5.0 MM R NOT ESTABLISHED
6) C.R.L.C.STEEL STRIP 15X1.0 MM GR.DD (0121060001)() COLD ROLLED LOW CARBON STEEL STRIP 15 +/-0.5 MM WIDE X 1.0 +/-0.05 MM THICK TO SPECN. IS-513 DD GRD R NOT ESTABLISHED
7) C.R.L.C.STEEL STRIP 50X0.46MM GR.DD (0121060046)() COLD ROLLED LOW CARBON STEEL STRIP 50 +/-0.5 MM WIDE X 0.46 +/-0.05 MM THICK TO SPECN. IS-513 DD GRD. R NOT ESTABLISHED
8) C.R.L.C.STEEL STRIP 78X0.55MM GR.DD (0121060055)() COLD ROLLED LOW CARBON STEEL STRIP 78 +/-0.5 MM WIDE X 0.55 +/-0.02 MM THICK TO SPECN. IS-513 DD GRD. R NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ROUND DIA 70x3000 MM LG ST GR:38XC, GOST:4543-71, HOT ROLLED FORGEABLE QUALITY IN ANNEALED CONDITION() DRG.NO.GOST:4543-71 R Not Estab.
Category : P
Grade : I
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) BANDING STEEL STRIP () IS 5872-1990 (SECOND REVISION) REAFFIRMED 1995 E Not Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STEEL FLAT SIZE 22X60 MM() AS PER DRG. C Not Estab.
2) STEEL ROD DIA.64MM+/-0.5MM() AS PER DRG. C Not Estab.
3) STEEL FLAT SIZE 70X38 MM() AS PER DRG. C Not Estab.
4) STEEL TO BS:970PT-1:1983 835 M15 OR EN-39B SQUARE 90 MM() AS PER DRG. C Not Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST FLAT SIZE 22 X 60MM Description : ST FLAT SIZE 22 X 60MM() Specification : ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40, R Estab
2) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION R Estab
Category : s
Grade : 3
Size : S
613 Lotus Industries
Plot No. 34, G.I.D.C., Gundlav, Khergam Road, Valsad, Gujarat
PIN1 : 396035
Phone No. : 9821086885
GSTIN : 24AAQPS3856E1ZD 		MUMP13424F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) DRILL COTTON PROOFED WHITE (BLEACHED) 71 CMS.() IND/TC/097 (C) R
2) LEATHER CLOTH BLACK (VENYL COATED FABARIC) 127/130 CM (50"X51") WIDE() IS: 1259-1984 GRADE II EXCEPT THE FOLLOWING R
Category : P
Grade : II
Size : S
614 JYA CONSULTANT & ENGINEERS
E.W.S 390/1550 RATANPUR PANKI, KANPUR,UTTAR PRADESH RATANPUR COLONY, PANKI Kanpur Nagar Uttar Pradesh
PIN1 : 208022
Phone No. : 9336223891
GSTIN : 09BNJPA6657A3Z3 		BNJPA6657A

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR] R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) PLASTIC ANTIQUE TIP BLACK[21]() Specification : LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS R Estab
2) Metal Hooks 6 mm x Metal Clip 12 mm[21]() Specification : Size 1 Fig. 1 of IS Specification no. IS:4066-1967 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) PLASTIC RING WITH HOLE BLACK FOR CORD[21]() Specification : PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS. R Estab
2) PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY[21]() Specification : PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS. R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FEMALE CAP (PUSH FIT) AS PER O.E.F.C. DRG.NO. SK - 914[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) PLASTIC STOPPER (BLACK)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) PLASTIC TOGGLE BLACK (BELL CAP)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) BUCKLE PLASTIC 50 MM SQUARE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) PLASTIC TOGGLE TYPE-I[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FEMALE CAP (PUSH FIT) AS PER DRG.NO. SK-914 FOR A/F RG.NO. SK-914 FOR A/F[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) GUIDE Z SECTION OF PCAD FOR AN 32 AIRCRAFT[21]() Specification : SPECN NO.- IND/GS/1764 (a) & DRAWING PLATE NO.12 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Spring Type Cylindrical Plastic Stopper White[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR R Estab
2) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR] R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) PLASTIC RING WITH HOLE BLACK FOR CORD[21]() Specification : PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS. R Estab
2) PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY[21]() Specification : PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS. R Estab
3) PLASTIC STOPPER OG[21]() Specification : PLASTIC STOPPER OG SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94(2) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
4) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]() Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511 AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
5) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
6) PLASTIC ZIPPER PULL WITH STRAP PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC ZIPPER PULL WITH STRAP, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PZPS & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY. R Estab
7) PLASTIC RING FOR CORD PSN 19 0511[21]() Specification : PLASTIC RING FOR CORD PSN 19-0511 AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
8) PLASTIC ANTIQUE TIP PSN 19 0511 TPX[21]() Specification : PLASTIC ANTIQUE TIP PSN 19-0511 TPX AS PER DRAWING, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PAT & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY R Estab
9) NYLON PUSH TAB WITH VARIOUS HOLES SPR TP PSN 19 5917[21]() Specification : SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HO R Estab
10) PLASTIC RING FOR CORD PSN 19 5917[21]() Specification : PLASTIC RING FOR CORD as per Drawing and sample held with OCFS Pantone Shade No 19 5917 TCX (green) as per Drawing No OCFS/TS/PRC & as per sample held with OCFS Specification Best Trade quality R Estab
11) SEALING CAP FOR CORD PSN 195917[21]() Specification : SEALING CAP FOR CORD MADE FROM HIGH DENSITY POLYETHYLENE. PANTONE SHADE No 19-5917 TCX As per drawing No OCFS/TS/PAT & As per sample held with OCFS, specification best trade quality. R Estab
Category :
Grade : Grade III
Size : S
615 Machinery & Spares Supply Co. (Sole Selling Agent of M/s New Diamond Chemicals, Kanpur)
79/15, Latouche Road, Kanpur, Uttar Pradesh
PIN1 : 208001
Phone No. : 9415127711
GSTIN : 09AAHHA4721K1ZA 		KNPA02143B

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) RUBBER ADHESIVE FOR TEMPORARY JOINING OF LEATHER COMPONENTS OF "BOOT ANKLE DVS"() AS PER REQUIREMENT & SPECIFICATION R
2) RUBBER SOLUTION() IND/GS/1535 R
Category : S
Grade : III
Size : O
1) Ordnance Equipment Factory
Name Specification Use Status
1) PVC SHEET FOR BAGKIT() AS PER ANNEXURE - B ATTACHED TO SPECIFICATION No. S/2532/BAG KIT UNIVERSAL(OG)/TC-6(a). R
Category : S
Grade : III
Size : O
1) Ordnance Equipment Factory
Name Specification Use Status
1) Tape Polyester various[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : CQA (T&C)/TEFSGAR/TC-6 R Estab
2) Cord Nylon Various[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : JSS:4020-9-1984 R Estab
3) WEBBING NYLON VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
4) TAPE POLYPROPELENE VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) TAPE COTTON VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
6) CORD COTTON OR ROPE COTTON OR LINE COTTON OR CORDAGE VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
7) CORD NYLON BRAIDED VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
8) TAPE NYLON VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
9) Cord Cotton Braided various[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : As per requirement & specification R Estab
10) LT. WT. WEB COTTON or WEB COTTON[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : As per requiremwnt and specification R Estab
11) WEB POLYPROPELENE/WEB POLYESTER VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
12) TAPE NEWAR VARIOUS COLOUR, WIDTH & THICKNESS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) CORD ELASTIC VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) SEWING THREAD POLYESTER or SEWING THREAD SPUN POLYESTER various[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : As per requirement and specification R Estab
3) NYLON SEWING THREAD various[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : As per requirement and specification R Estab
4) COTTON SEWING THREAD VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) ROPE POLYPROPELENE VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
6) THREAD LINEN VARIOUS[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) TWINE JUTE 3 PLY (CAT/PART NO. H2/4020000195)[21] (SSA OF TEXMILL SPARES PVT. LTD., JAIPUR.)() Specification : IS:1912 -1984 V.NO.2 R Estab
Category :
Grade : Grade III
Size : S
616 RATTAN INDUSTRIES (INDIA)
3044, STREET NO. 11, NEW JANTA NAGAR LUDHIANA PB
PIN1 : 141003
Phone No. : 0161-5045270
GSTIN : 03AADFR1543A1Z0 		JLDR01398F

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) CANOPY RELEASE ASSY WITH WIRE LOOP() ADRDE/1233 C ESTAB
2) SNAP HOOK QUICK EJECTOR() ADRDE/1210 C ESTAB
3) BUCKLE V SHAPED WITH SLIDING BAR() ADRDE/1211 C ESTAB
4) SNAP HOOK STATIC LINE() IND/GS/1753 C ESTAB
5) BUCKLE D SHAPED PTR-M() IND/GS/1798 C ESTAB
6) BUCKLE WAIST ADJUSTABLE() IND/GS/1802 C ESTAB
7) CANOPY RIGGING LINK DETACHABLE() IND/GS/1801 C ESTAB
8) QUICK ADJUSTABLE BUCKLE() ADRDE/205(c) C ESTAB
9) SLIDING BAR BUCKLE() IND/GS/1717(a) C ESTAB
10) SNAP HOOK PTR-R WITH PIN() ADRDE/163(a) C ESTAB
11) BUCKLE PACK OUTER() IND/GS/1795 C ESTAB
12) QUICK RELEASE CONNECTING LUG PTR-M() IND/GS/1769 C ESTAB
13) QUICK RELEASE SNAP HOOK DEVICE() ADRDE/112(d) C ESTAB
Category : P
Grade : II
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK ADJUSTABLE BUCKLE[99]() Specification : ADRDE/205(c) R Estab
2) CANOPY RELEASE ASSY WITH WIRE LOOP[99]() Specification : ADRDE/1233 R Estab
3) SNAP HOOK QUICK EJECTOR[2110061002]() Specification : SPCN.NO.ADRDE/1210(b) C Nonestab
4) BUCKLE V SHAPED WITH SLIDING BAR[99]() Specification : ADRDE/1211 R Estab
5) SLIDING BAR BUCKLE[99]() Specification : IND/GS/1717(a) R Estab
6) SNAP HOOK STATIC LINE[99]() Specification : IND/GS/1753 R Estab
7) BUCKLE WAIST ADJUSTABLE[99]() Specification : IND/GS/1802 R Estab
8) CANOPY RIGGING LINK DETACHABLE[99]() Specification : IND/GS/1801 R Estab
9) BUCKLE PACK OUTER[99]() Specification : IND/GS/1795 R Estab
10) BUCKLE D SHAPED PTR-M[99]() Specification : IND/GS/1798 R Estab
11) QUICK RELEASE CONNECTING LUG PTR-M[99]() Specification : IND/GS/1769 R Estab
12) QUICK RELEASE SNAP HOOK DEVICE[99]() Specification : ADRDE/112(d) R Estab
13) SNAP HOOK PTR-R WITH PIN[99]() Specification : ADRDE/163(a) R Estab
14) CANOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : SPCN. DRAWING NO.: ADRDE/1233(a) R Nonestab
15) QUICK RELEASE CONNECTING LUG (MALE)[2110018012]() Specification : SPECN. NO:-ADRDE/1107(C). SHEET NO.7 R Nonestab
16) A4/1670-000125 TRIANGULAR "D" RING FOR CARGO PARACHUTE[2110025003]() Specification : SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 ) C Nonestab
17) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
18) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Nonestab
19) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
20) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]() Specification : SPCN.NO.IND/GS/1815 (b) R Nonestab
21) METAL PULLEY MKII[2110060022]() Specification : ADRDE/1449 except that : new material i.e X2CrNi19-11 as per specification BS EN10216-5:2004 R Nonestab
22) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Nonestab
Category : P
Grade : II
Size :
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK ADJUSTABLE BUCKLE[99]() Specification : ADRDE/205(c) R Estab
2) CANOPY RELEASE ASSY WITH WIRE LOOP[99]() Specification : ADRDE/1233 R Estab
3) SNAP HOOK QUICK EJECTOR[2110061002]() Specification : SPCN.NO.ADRDE/1210(b) C Estab
4) BUCKLE V SHAPED WITH SLIDING BAR[99]() Specification : ADRDE/1211 R Estab
5) SLIDING BAR BUCKLE[99]() Specification : IND/GS/1717(a) R Estab
6) SNAP HOOK STATIC LINE[99]() Specification : IND/GS/1753 R Estab
7) BUCKLE WAIST ADJUSTABLE[99]() Specification : IND/GS/1802 R Estab
8) CANOPY RIGGING LINK DETACHABLE[99]() Specification : IND/GS/1801 R Estab
9) BUCKLE PACK OUTER[99]() Specification : IND/GS/1795 R Estab
10) BUCKLE D SHAPED PTR-M[99]() Specification : IND/GS/1798 R Estab
11) QUICK RELEASE CONNECTING LUG PTR-M[99]() Specification : IND/GS/1769 R Estab
12) QUICK RELEASE SNAP HOOK DEVICE[99]() Specification : ADRDE/112(d) R Estab
13) SNAP HOOK PTR-R WITH PIN[99]() Specification : ADRDE/163(a) R Estab
14) CANOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : SPCN. DRAWING NO.: ADRDE/1233(a) R Estab
15) QUICK RELEASE CONNECTING LUG (MALE)[2110018012]() Specification : SPECN. NO:-ADRDE/1107(C). SHEET NO.7 R Estab
16) A4/1670-000125 TRIANGULAR [2110025003]() Specification : SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 ) C Estab
17) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Estab
18) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Estab
19) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Estab
20) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]() Specification : SPCN.NO.IND/GS/1815 (b) R Estab
21) METAL PULLEY MKII[2110060022]() Specification : ADRDE/1449 except that : new material i.e X2CrNi19-11 as per specification BS EN10216-5:2004 R Estab
22) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Estab
23) NIV PACK FRAME[2110008014]() Specification : FOR - DRAWING NO.CQA(GS)/US/557 READ- DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019 C Nonestab
24) GROMMET WITH WASHER (13.5 MM)[2110025025]() Specification : DRAWING NO. ADRDE/1402-03-003 R Nonestab
25) RIP CORD LARGE[2110027005]() Specification : PROV DRAWING NO.ADRDE/115(f). R Nonestab
26) SHACKLE 'D' SHAPED LARGE[2110060002]() Specification : SPECIFICATION :DRAWING NO ADRDE/303(c). R Nonestab
27) GROMMET WITH WASHER 11mm[2110060007]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Nonestab
28) RIP CORD HANDLE[2110068038]() Specification : ADRDE/1325-G/DRD/65/98 R Nonestab
29) U SHACKLE for PP PSU[2110019015]() Specification : DRG. NO-ADRDE/1380. R Nonestab
30) GROMMET WITH WASHER 18 MM DIA (I/CODE 65005)[2110065005]() Specification : ADRDE/2004/03 R Nonestab
31) SPREADLE BAR BUCKLE[2110075002]() Specification : DRG. NO.ADRDE/1341(c) R Nonestab
32) SPRING EJECTOR[2110075024]() Specification : SPCN.NO.ADRDE/1197-A3/(SA-2)(a) R Nonestab
33) INERTIA PROOF QUICK RELEASE FITTING 4 POINT WITH CONNECTING LUG LARGE AND SMALL[9911036174]() Specification : INERTIA PROOF QUICK RELEASE FITTING 4 POINT QUANTITY = 01. DRAWING NO. ADRDE/209(b) CONNECTING LUG LARGE QUANTITY = 02. DRAWING NO. ADRDE/1305(a) CONNECTING LUG SMALL R Nonestab
34) SHOULDER BUCKLE (UPPER)[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
35) RIP CORD ASSEMBLY[2110075038]() Specification : Drg. No. ADRDE/1453(b) R Nonestab
36) GROMMET 18 MM WITH WASHER (I.CODE-8040)[2110168040]() Specification : ADRDE/PAS/2005/11 R Nonestab
37) CLIP SAFETY FOR 4 POINT QUICK RELEASE BOX (ACCT).[2110036000]() Specification : DRAWING NO. ADRDE/143 (b) R Nonestab
38) SHOULDER ADJUSTABLE BUCKLE (A.C.P.B./C.T.)[2110080015]() Specification : SPECN NO. ADRDE\194(a). R Nonestab
39) LIFT WEB SPACER[2111990002]() Specification : SPECIFICATION NO. : ADRDE/195(a) R Nonestab
40) RELEASE UNIT[2110030002]() Specification : DRAWING NO. : DO/196/84 R Nonestab
41) BUCKLE, ADRDE/1428[2110029013]() Specification : DRG.NO.DRD/356/96, ADRDE/1428 R Nonestab
42) STIFFNER PLATE[2110036054]() Specification : SPECN-ADRDE/1423 R Nonestab
43) HOLDING BUCKLE[2110071002]() Specification : DRG.NO.:ADRDE/1297 ( b ) R Nonestab
Category : P
Grade : II
Size :
617 SAMRAAT ENTERPRISES
7-UPTRON ESTATE PANKI KANPUR UP
PIN1 : 208022
Phone No. : 0512-2691580
GSTIN : 09ACDPG9588L2ZT 		ACDPG9588L

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) ARMING WIRE ASSEMLY() DRD/286/96 C ESTAB
2) ADJUSTABLE BUCKLE FOR RUCKSACK AIRBORNE() ADRDE/1452-04-001 C ESTAB
3) THIMBEL ( PARA SYSTEM FOR 81MM ILLG)() ADRDE/193(a) C ESTAB
4) 3-RING RELEASE SYSTEM RINGLARGE() ADRDE/1215 C ESTAB
5) 3-RING RELEASE SYSTEM RING(MEDIUM, SMALL)() ADRDE/1216 C ESTAB
6) ADJUSTABE BUCKLE(MK-I)() ADRDE/193(a) C ESTAB.
7) ASSY OF DOUBLE SLIDING BAR V BUCKLE FOR RUCKSACK AIRBORNE() ADRDE/1452-04-001 C ESTAB.
8) ATTACHMENT QUICK RELEASE 13 MM() IND/GS/1949(c) C ESTAB.
9) ATTACHMENT RING FOR SET STRAP RELEASE CORGO() IND/GS/1797 C ESTAB.
10) AUXILIARY SPRING FOR BP FOR MIRAGE 2000A/C() ADRDE/1106-A-(a) C ESTAB.
11) AUXILIARY SPRING FOR PTAR PARACHUTE() ADRDE/1460-02 C ESTAB.
12) AUXILIARY SPRING FOR PTR-R PARACHUTE 7.30 M() ADRDE/IND/GS/1831 C ESTAB.
13) BRIDLE RING FOR JAGUAR A/C() ADRDE/269(b) C NOT ESTAB
14) BUCKLE() ADRDE/1429-01 C ESTAB.
15) BUCKLE D ANGULAR() ADRDE/286 C ESTAB.
16) BUCKLE & BUCKLE STRAP FOR AN-32 A/C() DRD/355/97 C ESTAB.
17) BUCKLE BRASS QUICK RELEASE E.D. MK-II() ADRDE/IND/ADE/669 C ESTAB.
18) BUCKLE BRASS QUICK RELEASE MK-II() ADRDE/IND/GS/IAF/43(a) C ESTAB.
19) BUCKLE COPPER 25 MM() ADRDE/1452-01-004 C ESTAB.
20) BUCKLE PACK OUTER (PTRM)() CIGS/US/219 C ESTAB.
21) BUCKLE SPECIAL AL ALLOY SHEET() AS PER DRWADING AND SAMPLE C ESTAB.
22) BUCKLE STEEL 38 MM & 48 MM() DMSRDE/T&GS/93/410/b C ESTAB.
23) BUCKLE V SHAPED WITH SLIDING BAR() ADRDE/1211 C ESTAB.
24) BUCKLE WAIST ADJUSTABLE ADAPTER (SLIDING BAR) PTRM() CQA(GS)/US/451 C ESTAB.
25) BUCKLE WITH BAR() ADRDE/1430 C ESTAB.
26) CANOPY RELEASE ASSEMBLY() ADRDE/1233 C ESTAB.
27) CANOPY RIGGING LINK DETACHABLE PTRM() CQA(GS)/US/371 C ESTAB.
28) CLAMP BUCKLE FOR SADDLE STRAP() IMPD/0947 C ESTAB.
29) CLASP POWER STRAP() ADRDE/20 C ESTAB.
30) CLASP STRAP REGULATING() ADRDE/19 C ESTAB.
31) CLIPPER EMERGENCY() ADRDE/1364 a C ESTAB.
32) CLIP SAFETY FOR QUICK RELEASE BOX (PTRM)() IND/GS/1800 C ESTAB.
33) COIL SPRING FOR SU-30 A/C() ADRDE/1402-03-002 C ESTAB.
34) COIL SPRING FOR TAIL UNIT() ADRDE/1159-A1/SA-8-5 C ESTAB.
35) COIL SPRING FOR AUXILIARY OF B.P. HUNTER A/C() ADRDE/100 (b) C ESTAB.
36) COIL SPRING FOR B.P. FOR MIG 21 A/C() ADRDE/139 (b) C ESTAB.
37) COIL SPRING FOR MIG 29() ADRDE/1235-SA-2 C ESTAB.
38) COIL SPRING MODIFIED() ADRDE/271 (b) C ESTAB.
39) COIL SPRING WITH CONE FOR B.P. FOR MIRAGE 2000 A/C() ADRDE/305 (b) C ESTAB.
40) CONE BASE() ADRDE/1367(a) C ESTAB
41) CONES PACK LOCKING() IND/GS/1770 C ESTAB
42) CONES PACK LOCKING(BP FOR MIG-21A/C& MIG-23A/C)() ADRDE/60( e ) C ESTAB
43) CONES PACK LOCKING AIRCREW MK-I() ADRDE/124( a ) C ESTAB
44) CONES PACK LOCKING PTRR 7.30 M() CIGS/US/227(a) C ESTAB
45) CONE TOP() ADRDE/1320( a) C ESTAB
46) CONICAL SPIRAL SPRING() AS PER SAMPLE & DRG C ESTAB
47) CONNECTING LUG LARGE() ADRDE/1305(a) C ESTAB
48) CONNECTING LUG SMALL() ADRDE/1365( c ) C ESTAB
49) COVER CLAMP ASSY() DRD/18/92 C ESTAB
50) CURVED PIN() ADRDE/270 C ESTAB
51) DEES STEEL 38/32/4 MM() CQA(GS)/US/426(a) C ESTAB
52) DETACHABLE ALIGNMENT RING() AS PER SAMPLE & DRG C ESTAB
53) D RING (PARA ADJUSTABLE EQUIPMENT BAG)() ADRDE/167 C ESTAB
54) D SHAPED BUCKLE(PTR M)() CIGS/US/220 C ESTAB
55) D SHAPED BUCKLE(PTR M)() ADRDE/1230( a ) C ESTAB
56) D SHAPED SHACKLE SMALL() ADRDE/304( a ) C ESTAB
57) DRAG PLATE ASSY FOR PARA FOR REMOTELY DELIVERED MINES() ADRDE/1450 C ESTAB
58) DROUGE WITHDRAWAL LINE(HOUSING SUB ASSY)() AS PER SAMPLE & DRG C ESTAB
59) D/U SHACKLE() ADRDE/1417 C ESTAB
60) EAD SHACKLE BOW HARP 11 MM WITH PIN() AS PER SAMPLE & DRG C ESTAB
61) EJECTION DROUGE PARACHUTE FOR MIG-21A/C() ADRDE/1137( a ) C ESTAB
62) EJECTER BOARD (KIRAN A/C)() ADRDE/1164/A2(a) C ESTAB
63) EYES FOR PACK OPENING ELASTIC() IND/GS/1768 C ESTAB
64) EYELET Al ALLOY WITH WASHER NO 21() AS PER SAMPLE & DRG C ESTAB
65) EYELET STEEL 6MM DIA WITH WASHER() DMSRDE/LED/2000/01 C ESTAB
66) FRAME PACK SEAT (SMK-10)() ADRDE/188 C ESTAB
67) GROMMET & WASHER (AIRCREW PARA PACK/CHEST MK-I)() AS PER SAMPLE & DRG C ESTAB
68) GROMMET (HD FOR AN-32 A/C)() DRD/375/9 C ESTAB
69) GROMMET 14/11 MM WITH WASHER() ADRDE/306( a ) C ESTAB
70) GROMMET 14/11 MM WITH WASHER() DO/89/87 C ESTAB
71) GROMMET 14 MM WITH WASHER SS() ADRDE/1228 C ESTAB
72) GROMMET 16 MM WITH WASHER() ADRDE/PAS/2004/04 C ESTAB
73) GROMMET 18 MM WITH WASHER() ADRDE/PAS/2005/11 C ESTAB
74) GROMMET 30 MM WITH WASHER() ADRDE/1226 C ESTAB
75) GROMMET 8 MM WITH WASHER() ADRDE/1220 C ESTAB
76) GROMMET 8 MM WITH WASHER() ADRDE/61( c ) C ESTAB
77) HARNESS ATTACHMENT LUG MK-I() ADRDE/192( a ) C ESTAB
78) HELICAL SPRING() ADRDE/1164/A 8 C ESTAB
79) HOOK FOR ELASTIC PACK OPENING() ADRDE/87( f ) C ESTAB
80) HOOK SNAP() ADRDE/7( f ) C ESTAB
81) HOOK SNAP QUICK EJECTOR (CFF)() DO/127/77 C ESTAB
82) HOOK SNAP QUICK EJECTOR (CFF)() ADRDE/1210 C ESTAB
83) HOUSING RIP CORD 665 MM() DO/107/93 C ESTAB
84) HOUSING RIP CORD 440 MM() ADRDE/161( a ) C ESTAB
85) HOUSING RIP CORD() ADRDE/1214 C ESTAB
86) HOUSING RIP CORD MAIN & RESERVE() ADRDE/1213 C ESTAB
87) HOUSING RIP CORD MK-3() ADRDE/189(b) C ESTAB
88) INERTIA PROOF QUICK RELEASE FITTING() ADRDE/209 C ESTAB
89) INVERTED V() ADRDE/1359(a) C ESTAB
90) LACING D RING() ADRDE/1229( c ) C ESTAB
91) LIFT WEB SPACER MK-I() ADRDE/195 C ESTAB
92) LINK SOLID FOR HARNESS() ADRDE/1212 C ESTAB
93) LOCK DOUBLE CONE() AS PER SAMPLE & DRG C ESTAB
94) LOCKING PIN FOR SNAP HOOK PTRR 7.30M() IND/GS/281 C ESTAB
95) LOOP FITTED WITH FERRULE() ADRDE/281 C ESTAB
96) LUG CONNECTING QR ADUJUSTABLE PTRM() IND/GS/1759 C ESTAB
97) LUG METAL() ADRDE/122(c) C ESTAB
98) LUG METAL PTRR 7.30M() IND/GS/1846 a C ESTAB
99) METALLIC PLATE STIFFENING() ADRDE/1368( a ) C ESTAB
100) METAL COMPONENTS FOR HEAVY DROPING SYSTEM FOR AN 32 A/C() AS PER SAMPLE & DRG C ESTAB
101) NYLON RIP CORD WITH PIN() ADRDE/309( a ) C ESTAB
102) PACK FRAME FOR PTAG() AS PER SAMPLE & DRG C ESTAB
103) PACK FRAME() ADRDE/1108 C ESTAB
104) PACK FRAME (ACCT MK-1)() ADRDE/121(a) C ESTAB
105) PACK FRAME PTRR 7.30M() IND/GS/1813 C ESTAB
106) PACK OPNING ELASTIC EYE ( CURVED )() ADRDE/265 C ESTAB
107) PACK OPNING SPRING ELASTIC SHORT , LONG PTRR() ADRDE/781(d) C ESTAB
108) PACK STEEL MK-1() ADRDE/123(c) C ESTAB
109) PACKING PIN 5MM DIA() ADRDE/1235-A-8(b) C ESTAB
110) PACKING PIN SU-30A/C() ADRDE/1402-05 C ESTAB
111) PERSONAL SURVIVAL PACK BUCKLE 25 MM() ADRDE/117(d) C ESTAB
112) PIN() ADRDE/1288 C ESTAB
113) PIN WITH PULLEY() ADRDE/1300-G(b) C ESTAB
114) PIN TENT ANGLE IRON MEDIUM MK-2() CQA(GS)/US/467(b) C ESTAB
115) PLATE ATTACHMENT CAP INSTRUMENT() ADRDE/1222 C ESTAB
116) PLATE CURVED WITH HOLE PSP JAGUAR A/C() ADRDE/1107(a) C ESTAB
117) PLATE CURVED WITH HOLE (AL ALLOY)() ADRDE/1107(a) C ESTAB
118) PLATE FITTED WITH TWO CONES FOR PSP TYPE R() ADRDE/54(a) C ESTAB
119) PSP LOWERING LINE FOR KIRAN A/C() ADRDE/797/ c C ESTAB
120) PULLEY SU-30 A/C() ADRDE/1402-01-002 C ESTAB
121) PULLEY ATTACHMENT (BP-FOR MIG -23 )() ADRDE/290( c ) C ESTAB
122) PULLEY LARGE / SMALL() ADRDE/172( c ) C ESTAB
123) PULLEY (PARA SYSTEM FOR TAIL UNIT )() ADRDE/1159-A2/SA-6 C ESTAB
124) PULLEY RTU() ADRDE/1033-A2-SA-1 C ESTAB
125) QUICK ADJUSTABLE BUCKLE MK -10() ADRDE/205(c) C ESTAB
126) QUICK RELEASE ATTACHMENT FOR PERSONAL SURVIVAL PACK ( MALE)() ADRDE/98 (c) C ESTAB
127) QUICK RELEASE ATTACHMENT FOR PERSONAL SURVIVAL PACK (FEMALE)() ADRDE/173 C ESTAB
128) QUICK RELEASE BOX (PTRM)() IND/GS/1833 a C ESTAB
129) QUICK RELEASE BOX 4 POINTS() ADRDE/243 C ESTAB
130) QUICK RELEASE CONNECTING LUG ADJUSTABLE(PTRM)() CIGS/US/221 C ESTAB
131) QUICK RELEASE CONECTOR() ADRDE/1455 C ESTAB
132) QUICK RELEASE LINK() ADRDE/113 C ESTAB
133) QUICK RELEASE SNAP HOOK DEVICE() ADRDE/112(c) C ESTAB
134) QUICK RELEASE UNIT() ADRDE/1369(a) C ESTAB
135) RAPID CONNETOR LINK FOR RAM AIR PARA() ADRDE/1225 C ESTAB
136) REEL() DRD/225/94 C ESTAB
137) RELEASE HANDLE ( RAM AIR PARA )() ADRDE/1227 C ESTAB
138) RELEASE UNIT FOR PARA SAIL() DO/196/84 C ESTAB
139) RING() ADRDE/1291 C ESTAB
140) RING LARGE ,SMALL, PIN ( PARA SYSTEM FOR SONOBUOY RGB)() ADRDE/1154-SA22(c) C ESTAB
141) RING METALLIC() AS PER SAMPLE & DRG C ESTAB
142) RING MTALLIC ( HEAVY DROPING SYSTEM AN- 32 A/C )() DRD/393/97 C ESTAB
143) RING PACK COVER() ADRDE/27( d ) C ESTAB
144) RING FOR STAND COVER() ADRDE/1353 C ESTAB
145) PULLEY() ADRDE/311 C ESTAB
146) PULLEY ( LINK 25 MM LONG )AN -32 A/C() DRD/399/97 C ESTAB
147) RIP CORD ASSEMBLY() ADRDE/169(a) C ESTAB
148) RIP CORD HANDLE MAIN (RAMAIR 9 CELL PARA )() ADRDE/1218 C ESTAB
149) RIP CORD HANDLE PARACHUTE SEAT MK-10() ADRDE/190(a) C ESTAB
150) RIP CORD HANDLE PSP ( TYPE -R )() ADRDE/174(a) C ESTAB
151) RIP CORD HANDLE PTAR() ADRDE/PAS/2004/01 C ESTAB
152) RIP CORD HANDLE PTRR-7.30 M() IND/GS/1890 C ESTAB
153) RIP CORD HANDLE RESERVE() ADRDE/1219 C ESTAB
154) RIP CORD HANDLE LARGE() ADRDE/115(f) C ESTAB
155) RIP CORD LARGE , SMALL WITH LOOP() ADRDE/282( b ) C ESTAB
156) RIP CORD HANDLE RESERVE() ADRDE/1235-A9 C ESTAB
157) RIVETS COPPER BASE TINNED() CIGS/US/8(b) C ESTAB
158) ROUND HEAD SLOTTED M/C SCREW M 6/12() SK-975 C ESTAB
159) RUNNERS() IND/GS/762(a) C ESTAB
160) SAFETY PIN FOR SNAP HOOK STATIC LINE PTRM() CIGS/US/223(a) C ESTAB
161) SEAT PAN LUG() ADRDE/1303(a) C ESTAB
162) SHACKLE D SHAPED LARGE BP FOR MIRAGE 2000A/C() ADRDE/303( c ) C ESTAB
163) SHACLE WITH PIN() ADRDE/TSSR/AASM/01 C ESTAB
164) SHACLE WITH PULLEY HD SYSTEM FOR AN -32 A/C() AS PER SAMPLE & DRG C N0T ESTAB
165) SHOULDER ADJUSTMENT BUCKLE() ADRDE/194(a) C ESTAB
166) SLIDING BAR BUCKLE() IND/GS/1717(a) C ESTAB
167) SLIDING BAR BUCKLE 47MM() ADRDE/129(d) C ESTAB
168) SNAP HOOK ( STATIC LINE PTRM )() CIGS/US/223( a ) C ESTAB
169) SNAP HOOK BRONZE FIXED BALL() ADRDE/1221 C ESTAB
170) SHACKLE D SHAPED LARGE BP FOR MIRAGE 2000A/C() ADRDE/303( c ) C ESTAB
171) SHACLE WITH PIN() ADRDE/TSRR/AASM/01 C ESTAB
172) SHACLE WITH PULLEY HD SYSTEM FOR AN -32 A/C() AS PER SAMPLE & DRG C N0T ESTAB
173) SHOULDER ADJUSTMENT BUCKLE() ADRDE/194(a) C ESTAB
174) SLIDING BAR BUCKLE() IND/GS/1717(a) C ESTAB
175) SLIDING BAR BUCKLE 47MM() ADRDE/129(d) C ESTAB
176) SNAP HOOK ( STATIC LINE PTRM )() CIGS/US/223( a ) C ESTAB
177) SNAP HOOK BRONZE FIXED BALL() ADRDE/1221 C ESTAB
178) SNAP HOOK TYPE PTRR() CIGS/US/234 (a) C ESTAB
179) SNAP HOOK PTRR() ADRDE/163(a) C ESTAB
180) SNAP FASTENER 4 PIECES() AS PER SAMPLE & DRG C ESTAB
181) SPREADER BAR PRIMARY() ARM 1350B 8 C ESTAB
182) SPRING CLIP FOR SNAP HOOK() ADRDE/197(d) C ESTAB
183) SPRING() ADRDE/1460-02 a C ESTAB
184) SPRING ( BP FOR MIG -29A/C )() ADRDE/1235-SA-2 C ESTAB
185) SPRING EJECTOR() AS PER SAMPLE & DRG C ESTAB
186) SPRING RIP CORD POCKET MAIN AND RESERVE() ADRDE/1306 C ESTAB
187) SPRING PILOT PARA MAIN RAM AIR 9 CELL() ADRDE/276 C ESTAB
188) SPRING PILOT PARA MAIN RAM AIR 9 CELL() ADRDE/1224 C ESTAB
189) SPRING WITH CONE ( BP FOR MIRAGE 2000A/C )() ADRDE/305( b ) C ESTAB
190) SHACKLE D SHAPED LARGE BP FOR MIRAGE 2000A/C() ADRDE/303( c ) C ESTAB
191) SHACLE WITH PIN() ADRDE/TSRR/AASM/01 C ESTAB
192) SHACLE WITH PULLEY HD SYSTEM FOR AN -32 A/C() AS PER SAMPLE & DRG C N0T ESTAB
193) SHOULDER ADJUSTMENT BUCKLE() ADRDE/194(a) C N0T ESTAB
194) SLIDING BAR BUCKLE() IND/GS/1717(a) C ESTAB
195) STEEL RING() ADRDE/543-A1/SA-1 C ESTAB
196) STIFFENER FOR RIP CORD PIN PARACHUTE PTRR-7.30 M() CIGS/US/230 C ESTAB
197) STOPPER 33 MM DIA 2.5MM THICK HYLAM SHEET() AS PER SAMPLE & DRG C ESTAB
198) SUSPENSION LUG() ADRDE/114 C ESTAB
199) SWIVEL CONE WITH PLATE() ADRDE/1321G(b) C ESTAB
200) THIMBLE MIG 29 /SU- 30 A/C() ADRDE/1394(a) C ESTAB
201) THIMBLE ( PARA SYSTEM FOR 51 MM ILLG )() ADRDE/553-A-1(a) C ESTAB
202) THIMBLE ( PARA SYSTEM FOR 81MM ILLG)() ADRDE/1113-a C ESTAB
203) THIMBLE ( PARA SYSTEM FOR 120 MM ILLG )() ADRDE/535-A2/SA-1(a) C ESTAB
204) TOW BRIDLE() ARM 1350 B2 C ESTAB
205) TOWING RING 20 MM ID SU-30A/C() ADRDE/1402-02-002 C ESTAB
206) TOWING RING LARGE 82 MM , SMALL 14.5 MM() ADRDE/1235-A2 C ESTAB
207) TOWING RING LARGE & SMALL() ADRDE/77( c ) C ESTAB
208) TRIANGULAR D RING FOR BP FOR HUNTER A/C() ADRDE/109(d) C ESTAB
209) TRIANGULAR D RING FOR CARGO PARA() CIGS/GS-1419(c) C ESTAB
210) WASHER FOR LOOP PACK CLOSING() ADRDE/1232 C ESTAB
211) WEB EQUIPMENT LT WT METAL FITTING() CQA(GS)/US/324 C ESTAB
212) WEB EQUIPMENT PART 37 BRASS FITTING() IND/GS/1541(a) C ESTAB
213) WIRE ROPE() OPDR/CT/27/UI/A3 C ESTAB
214) WIRE ROPE ASSY FOR HUNTRE A/C() ADRDE/244 C ESTAB
215) WIRE ROPE CARLGUSTAF() ADRDE/543-A-2/SA-1 C ESTAB
216) MOULDED PLATE TYPE I() ADRDE/1309 (a) C Non Established
217) METALLIC REEL() ADRDE/786-SA-1 C Established
218) METALLIC RING() ADRDE/1293 C Established
219) METALLIC REEL FOR JAGUAR() ADRDE/1152(a) C Non Established
220) METAL PULLEY MK-II FOR 5 FEET DROUGE MIRAGE 2000/HARRIER() ADRDE/1449 C Non Established
221) AIRCRAFT QUALITY BUCKLE ( MALE)() AS PER SPECIFICATION C Non Established
222) AIRCRAFT QUALITY BUCKLE ( FEMALE)() AS PER SPECIFICATION C Non Established
223) ALUMINIUM TUBE() AS PER SPECIFICATION C Non Established
224) ARMING WIRE ASSEMBLY() AS PER SPECIFICATION C Non Established
225) ASSY OF DOUBLE SLIDING BAR V BUCKLE FOR RUCKSHAK AIRBORNE() AS PER SPECIFICATION C Non Established
226) BOLT WITH NUT (LARGE) SS AISI Gr 316() AS PER SPECIFICATION C Non Established
227) BUCKLE PLASTIC IN VARIOUS SIZES & BUCKLE PLASTIC QUICK RELEASE() AS PER SPECIFICATION C Non Established
228) BUCKLE LEG BREAST ADOPTER (C-3-3)() AS PER SPECIFICATION C Non Established
229) BUCKLE WITH BAR () AS PER SPECIFICATION C Non Established
230) BUCKLE STEEL LARGE () AS PER SPECIFICATION C Non Established
231) BUSH FOR NRV (AL ALLOY)() AS PER SPECIFICATION C Non Established
232) CLAMP SADDLE STRAP() AS PER SPECIFICATION C Non Established
233) CLASP FOR MAIN SLEEVE FOR PSM() AS PER SPECIFICATION C Non Established
234) CLIP IRON FOR TENT EXTENDABLE() AS PER SPECIFICATION C Non Established
235) COIL SPRING FOR TORPEDO PARA() AS PER SPECIFICATION C Non Established
236) CONNECTING LUG BEND() ADREDE/1295(a) C Established
237) CONNECTING LUG FOR AUX PARA() ADREDE/1301(a) C Established
238) CONNECTING LUG OF END PLATE() ADREDE/1366(a) C Established
239) CONNECTING LUG ( JAGUAR/MIRAGE )() ADREDE/1339 C Established
240) CONNECTOR D RING FOR AIRCREW PARA() ADREDE/200(a) C Established
241) DETACHABLE ALIGNMENT RING() ADREDE/1296-02(a) C Established
242) DETACHABLE SHROUD LINK() ADREDE/1299-G(b) C Non Established
243) D RING() ADREDE/1298(a) C Established
244) D RING() ADREDE/1337 C Established
245) D SHAPED BUCKLE() IND/GS/1798 C Established
246) DINGHY RING() AS PER SPECIFICATION C Established
247) FASTNER FOR LIFT DOT CLOTH() AS PER SPECIFICATION C Established
248) FEMALE PORTION FOR DWL() ADRDE/1343(b) C Established
249) FEMALE PORTION FOR DWL() ADRDE/1344 C Established
250) FIX LOCK EQUIP CARRIER FOR CFF() ADRDE/PAS/2005/12-06 C Non Established
251) FOUR WAY JOINT() CQA(GS)/US/467 (b) C Non Established
252) GROMMET WITH WASHER ID 13.5MM BP SU-30() ADREDE/1402-03-003 C Established
253) GROMMET 14,11MM WITH WASHER BP MIRAGE 2000() ADRDE/1106-A-4 C Established
254) GROMMET 14MM WITH WASHER SS() ADRDE/1228 C Established
255) HAMMER SLEDGE DOUBLE FACED 2 Kgs() CQA(GS)/US/467(b) C Non Established
256) HARD SHELL CONTAINER() AS PER SPECIFICATION C Established
257) HARLEY BUCKLE() ADRDE/1308 (b) C Established
258) HEX BOLT WITH LOOP() CQA(GS)/US/467 (b) C Established
259) HOLDING BUCKLE() ADRDE/1297-01(a) C Established
260) HOOK IRON FOR TEFS() CQA(GS)/US/467 (b) C Non Established
261) HOUSING SUB ASSY() ADRDE/786-SA-2 C Established
262) HOUSING SUB ASSY FOR JAGUAR() ADRDE/1152 (a) C Established
263) CARBINERS PLAIN TYPE() IND/GS/1497 C Non Established
264) CARBINERS SCREW TYPE MK-2() IND/GS/1677 (a) C Non Established
265) LAP STRAP ADJUSTABLE BUCKLE PP JAGUAR() AS PER SPECIFICATION C Non Established
266) LEG LOOP SHACKLE (PP PSU-36)() ADRDE/1381 C Non Established
267) LOCK OCK WITH BUCKLE () ADRDE/1354 C Non Established
268) METALLIC ARC SUPPORT() ADREDE/1311 (b) & 1312 C Established
269) METALLIC BUCKLE() AS PER SPECIFICATION C Non Established
270) METAL HOOK() OPF/PARA/USCN/2006/04 C Non Established
271) MOULDED PLATE TYPE II() ADRDE/1310 (b) C Non Established
272) MOUNTING BRACKET (LYING PATIENT)() AS PER SPECIFICATION C Non Established
273) MOUNTING BRACKET (SITTING PATIENT)() AS PER SPECIFICATION C Non Established
274) PACK COVER WITH CASING (HELICOPTER VERSION)() ADRDE/1046-A-2a C Non Established
275) PACK OPENING ELASTIC HOOK MK-1() ADRDE/87 f C Established
276) PACK OPENING SPRING ELASTIC SHORT PTRR() IND/GS/1827 a C Established
277) PACK OPENING SPRING ELASTIC 203MM PTAR() IND/GS/1827 a C Established
278) PIN SECURING FLAP() ADRDE/786-SA-3 C Established
279) PIN SECURING FLAP() ADRDE/1152 (a) C Established
280) PIN CARBON STEEL FOR TEFS() IND/GS/1630 C Non Established
281) PIN TENT ANGLE IRON MK-2() CQA(GS)/US/428 C Non Established
282) RIP CORD ASSEMBLY() ADRDE/1323 G (b) C Established
283) RIP CORD ASSY FOR JAGUAR() ADRDE/1453 C Established
284) ROOF POLE FOR TEFS() CQA(GS)/US/467 (b) C Non Established
285) ROLLER FITTING FOR MIRAGE/HARRIER/JAGUAR PP() ADRDE/1446 C Non Established
286) SHACKLE D SHAPED SMALL FOR BP MIRAGE() ADRDE/304(b) C Non Established
287) SHACKLE U TYPE FOR TOTPEDO PARA() AS PER SPECIFICATION & SAMPLE C Non Established
288) SHACKLE WITH PULLEY MIRAGE 2000() ADRDE/302(c) C Non Established
289) SHOULDER BUCKLE UPPER() ADRDE/1302(a) C Non Established
290) SINGLE SLIDING BAR BUCKLE() AS PER SPECIFICATION C Established
291) SNAP HOOK() ADRDE/7 f C Non Established
292) SNAP HOOK (AIR CREW PARA CHEST TYPE MK-1)() ADRDE/196(d) C Non Established
293) SNAP HOOK ( STATIC LINE) FOR HD AN-32 AIR CRAFT() ADRDE/1431 C Non Established
294) STICKER STRAP LUG () ADRDE/1338 C Non Established
295) STIFFNER PLATE FOR HD PARA AN-32() ADRDE/1423 C Non Established
296) STIRRUP() OPF/PARA/USCN/2006/03 C Non Established
297) STRIP 32 MM EQUIPMENT CARRIER FOR CFF() ADRDE/PAS/2005/12-05 C Non Established
298) SUPPORT PLATE() OPF/DO/ME-265 C Non Established
299) SUSPENSION ASSEMBLY() ADRDE/1416 C Non Established
300) TENT DEES OF VARIOUS SIZES() AS PER SPECIFICATION C Non Established
301) THIMBLE FOR PRITHVI BOMB() ADRDE/1398 (a) C Established
302) THIMBLE FOR ROTATING CANOPY PSM-4&5() ADRDE/1319 C Established
303) THIMBLE ( PARA SYSTEM FOR MORTOR BOMB 120MM)() CQA(GS)/US/381 (a) C Established
304) THREE WAY JOINT WITH ROOF POLE() CQA(GS)/US/467 (b) C Non Established
305) TRIANGULAR D RING FOR PTAM() ADRDE/109(c) C Non Established
306) TRIANGULAR D RING FOR SD PARA() CQA(GS)/US/391 C Established
307) TRIANGULAR D RING () JSS:8305-02:2005 C Non Established
308) U SHACKLE FOR PSU-36, MIG-29 A/C() ADRDE/1380 C Non Established
309) U PIN FOR TEFS() CQA(GS)/US/467 (d) C Non Established
310) VENT RING FOR EJECTION DROGUE PSM 4&5() ADRDE/1328 C Non Established
311) WAIST LOOP SHACKLE() ADRDE/1313 C Non Established
312) WHITE LINE PIN ASSY() ADRDE/1356 C Non Established
313) WING NUT WITH BRACKET() CQA(GS)/US/467 (b) C Non Established
314) WIRE ROPE FOR TORPEDO PARA() AS PER SPECIFICATION & SAMPLE C Non Established
315) WIRE ROPE ASSY FOR RUCKSHACK AIRBORNE() ADRDE/1452-04-005 C Non Established
316) WIRE ASSY FOR MENA A/C() ADRDE/314(a) C Non Established
317) WIRE ROPE FOR CARLGUSTAF() IND/GS/1887 C Established
318) YELLOW/WHITE/LINE RIP PIN() ADRDE/1322 (a) C Non Established
319) COIL SPRING WITH PLATE (RESERVE)() ADRDE/1223 C Established
320) COIL SPRING RTU() ADRDE/1041/A1/SA-1 C Established
321) GROMMET STEEL WITH WASHER STEEL() ADRDE/61(c) C Established
322) PULLEY () ADRDE/311 C Non Established
323) PULLEY (LING 25MM LONG) AN-32 A/C() DRD/399/97 C Non Established
324) RIP CORD WITH PIN() ADRDE/1235-A9 C Non Established
325) PULLEY SUSPENSION ASSY HD FOR AN-32() ADRDE/1416-02 C Non Established
326) PULLEY FOR MIG-29() ADRDE/1235-SA1 C Non Established
327) Q R CONNECTOR LUG MALE() ADRDE/1107(a) sheet 8 C Non Established
328) REEL DROGUE PARA 5 FEET () ADRDE/1457 C Non Established
329) RING FOR RUCKSACK AIRBORNE() ADRDE/1452-08-001 C Non Established
330) RING FOR HD PARA() ADRDE/1290 C Non Established
331) RING FOR HD PARA() ADRDE/1291 C Non Established
332) RING FOR PACK COVER HD PARA AN-32() ADRDE/27(d) C Non Established
333) SNAP HOOK O RING() ADRDE/1452-06-001 C Non Established
334) SPACER BUCKLE SAWTOOTHED (SAFETY BELT FOR AIRDISPATCH CREW)() ADRDE/166(a) C Non Established
335) SPANNER OPEN JAW FIXED D/E,S/P 10,11mm for TEFS() CQA(GS)/US/467 (b) C Non Established
336) SPREADER BAR BUCKLE () ADRDE/1341 C Non Established
337) SPRING BALL TYPE PSM SERIES() ADRDE/1332-G C Non Established
338) LIFT WEB STRAND STRAP() AS PER DRG/SPECN C Non Established
339) GUIDE RING() AS PER DRG/SPECN C Non Established
340) SHOULDER STREP LUG() AS PER DRG/SPECN C Non Established
341) LEFT STREP D RING() AS PER DRG/SPECN C Non Established
342) SHACKLE WITH NUT AND BOLT() AS PER DRG/SPECN C Non Established
343) HOUSING WITH FERRULE() AS PER DRG/SPECN C Non Established
344) METAL REEL() ADRDE/PAS/2008/26 C Non Established
345) ORK CONNECTING KNOB() ADRDE/1396 C Non Established
346) DIST CONNECT LOCK BUCKLE() ADRDE/1355 C Non Established
347) CROSS CONNECTOR STREP SAFETY PIN() ADRDE/1390 C Non Established
348) VARIOUS TYPE RING() AS PER DRG/SPECN C Non Established
349) END STRIP() ADRDE/1382 C Non Established
350) QUICK RELEASE LOCK TP WITH BUCKLE() ADRDE/PAS/2007/16 C Non Established
351) SPRING FOR RIP CORD POCKET() AS PER DRG/SPECN C Non Established
352) CANOPY RIGGING LINK WITH BOLT() ADRDE/1314-G a C Non Established
353) SHACKLE D LARGE() ADRDE/303 c C Non Established
354) SOCKET FOR HARNESS() ADRDE/1387 C Non Established
355) RING FOR BREAK LINK() ADRDE/1392 C Non Established
356) DISK FOR BALL TYPE AUXILLARY() ADRDE/1389 C Non Established
357) PIN FOR BALL TYPE AUXILLARY() AS PER DRG/SPECN C Non Established
358) BALL TYPE SPRING() AS PER DRG/SPECN C Non Established
359) STRAND FOR SAFETY PIN() ADRDE/1384 C Non Established
360) U SHACKLE() AS PER DRG/SPECN C Non Established
Category : P
Grade : III
Size : S
1) Ordnance Parachute Factory

[ENR Registration]
Name Specification Use Status
1) QUICK RELEASE CONNECTING LUG (MALE) Description : QUICK RELEASE CONNECTING LUG (MALE)() Specification : SPECN. NO:-ADRDE/1107(C). SHEET NO.7 R Estab
2) CANOPY RELEASE ASSEMBLY WITH WIRE LOOP Description : CANOPY RELEASE ASSEMBLY WITH WIRE LOOP() Specification : SPCN. DRAWING NO.: ADRDE/1233(a) R Estab
Category : p
Grade : 3
Size : S
618 SAI DIVIJA ENGINEERING WORKS
28-174/3,MARUTHINAGAR MARUTHINAGAR HYDERABAD Telangana
PIN1 : 500054
Phone No. : 23072255 		AVEPS3628P

Download 		1) Ordnance Factory Medak
Name Specification Use Status
1) STOWAGE AND ATTACHMENT OF SPTA 6755-94-5550() As per drawing C Not Estab
Category : DDP,DP
Grade : I,II
Size : S
619 TRAVANCORE PRECISION COMPONENTS PVT. LTD.
Lakshmi,12-13-1241,2nd Floor St.No.8, Tarnaka, Secunderabad Hyderabad Telangana
PIN1 : 500017
Phone No. : 27006564
GSTIN : 36AADCT1147K1ZA 		HYDT04011A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) WRENCH SOCKET() DRG NO. 175.90.006CBCB C Not Established
2) HUB GENERATOR() DRG NO. 172.47.228 C Not Established
3) INJECTOR() DRG.NO.175.36.013CB-2A C Non Established
4) EXTERNAL FUEL TANK CUT-OFF COCK ASSY.() DRG.NO.176.33.023CBCB C Non Established
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BORE WEAR REDUCING LINER (BWRL) FOR M-92[64]() Specification : Specification/Drawning No. OFN/BMCS/M92/BWRL C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) COMBUSTIBLE CARTIDGE CASE, (M 92)[65]() Specification : DRG./SPEC NO.:OFN/BMCS/M-92/CCC C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/Drg No. OFN/BMCS/M-91/M-92/BARRIERBAG C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) COMBUSTIBLE CARTRIDGE CASE (CCC) FOR M-91[65]() Specification/Drawing No. : OFN/BMCS/M-91/CCC C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) PROPELLANT RETAINING DEVICE(PRD) FOR M-91[65]() Specification/Drawing No. : OFN/BMCS/M-91/PRD C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) IGNITER TUBE (IT) FOR M-91[63]() Specification/Drawing No. : OFN/BMCS/M-91/M-92/IT C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1010501024 NG BARRIER FOR 120MM FSAPDS AMMN Description : 1010501024 NG BARRIER FOR 120MM FSAPDS AMMN() Specification : NG BARRIER FOR 120MM FSAPDS AMMN. TO SPECN. NO.HEMRL/CCC/PS/408 SEPT. 2014 & DRG. NO. HEMRL/CCC/120/FS/2014 (ARDE DRG.NO. 1006 03 11 00 00 000 00TA FOR REFERENCE) C Estab
Category : p
Grade : 3
Size : S
620 Schutz Carbon Electrodes Pvt. Ltd.
43/1, 43/2 & 134 G.I.D.C. Estate, Gandhinagar Kalol (N.G) Gujrat
PIN1 : 382725
Phone No. : (02764) 223368
GSTIN : 24AADCS0463M1ZB 		AHMS00162B

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) CYLINDRICAL MACHINED GRAPHITE ELECTRODE WITH THREADED SOCKET AND CONNECTING PINS() IS:9050-1979, Drawing No. ESR/100/26 R1 R Not Estab.
2) GRAPHITE ELECTRODES 254 MM DIA X 1500 MM LONG OF WEIGHT 134 KGS EACH WITH NIPPLES FOR THE ELECTRODES OF WEIGHT 5 KGS EACH WITH PITCH FILLED() As per specification R Not Estab.
3) GRAPHITE CRUCIBLE FOR LADDLE OF SLAG MELTING FURNACE() As per MSF Drawing No. LFVD/1000/22 (Sheet No. 3/3) R Not Estab.
Category : P
Grade : I
Size : S