Specification : SHELL 105MM IFG HE A/L FORGED STEEL TO DRG.PART NO.ISX-46GE SHEET-1 DC NO. 37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14.
R
Estab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6262010101 SHELL 105MM IFG HE EMPTY[62]()
Specification : SHELL 105MM IFG HE A/L DRAWING PART NO.ISX 46 GE (2-SHEETS) DC NO. 36784-A DATED 20-9-2001
C
Nonestab
Category : dp
Grade : Grade I
Size :
L
1125
GLOBAL CASTINGS
Khasra 205, Village Harraipur, Near Tempo Union Tehsil Baddi Baddi Baddi Himachal Pradesh
PIN1 : 173205
Phone No. : 9501026886
GSTIN : 02DPGPK1700D1ZQ
1) KNOB GAS REGULATOR SCREW FOR MAG
Description : KNOB GAS REGULATOR SCREW FOR MAG()
Specification : KNOB, GAS REGULATOR SCREW PART NO. 1012 TO DS CAT NO. 1005-000417 DC(I) NO. 25292-SA DT- 14.03.02 IN FINISHED CONDITION (I.C.TO BE SUPPLIED BY SAF)
1) CLOTH COTTON DOWN TIGHT, COLOUR SIGNAL RED & WHITE, IND/ME/1005(Prov)()
IND/ME/1005(Prov)
Category : DP
Grade : I,II
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) CAMBRIC COTTON 762MM WIDE NO()
Specification : IS:5088-1982(1ST REVISION)WITH AMENDMENT NO 2 EXCEPT (1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2)(1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2) NOT EXCEED 0.5% WHEN DETERMINED AS PER SPECN IS- 1967-1961".
Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH
Specification : CLOTH CAMBRIC COTTON 111.76 CM.(44"WIDE DYED RED VARIETY NO 2 TO SPECIFICATION . IS 5088-1982 REAFFIRMED 2007 (FIRST REVISION) WITH AMENDMENT NO.2 AND COLOUR CODE NO.537 OF SPECN.NO.IS-5-2007(SIXTH REVISION) REAFF 2012.
Specification : 16TEX X 6 BLEACHED UNPROOFED. TO SPECIFICATION NO JSS 8310-02:2007 REVISION NO. 2 DC NO. 4020-ME DATED 8.1.2010 IN ROLLS OF 1000 METRE LENGTH.
R
Estab
7) BAG CALICO CLOTH WHITE
Description : BAG CALICO CLOTH WHITE()
Specification : BAGS CALICO CLOTH WHITE TO DRG NO.OFI/MA/140 (PROV) R5 AND CLOTH CONFIRMING TO SPEC NO.IS:5088-1982 VARIETY NO.3 (FIRST REVISION) WITH AMENDMENT NO.2REAFFIRMED-2017.
Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Link for JVPC[7012470234]()
Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
2) ROD FRONT SPRING RECOIL FOR JVPC[70]()
Specification : ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
2) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Hammer for JVPC[7012470236]()
Specification : HAMMER FOR JVPC 5.56MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
2) BODY COVER RIGHT HAND AIR VERSION FOR MAG 7 62 MM[70]()
Specification : BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
.
C
Nonestab
3) FEED ARM FOR AIR VERSION for MAG[70]()
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BARREL COVER ASSEMBLY FOR JVPC[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING BLANK[70]()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Lower Feed Slide for MAG[70]()
Specification : BODY LOWER FEED SLIDE TO DS CAT NO. 1005-000475 DC(I) NO. 25303-SA DT-23/03/2002 IN FINISHED CONDITION WITHOUT HT & PLATING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLIP for MAG[70]()
Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER for MAG[70]()
Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ROLLER FOR MAG[70]()
Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Threaded Piston Extension for CQB DRG No 1901 01 01 00 03 002 00DC[70]()
1) PISTON EXTENSION BLANK FOR CARBINE 5 56MM[70]()
Specification : PISTON EXTENSION BLANK TO DRG NO. AKC-07/01BL*1 FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) RETAINING PIN PISTON FOR MAG[70]()
Specification : RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
2) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
3) PIN STOP BOLT LOCKING TO DR NO 29P 0048STAR required for 0POINT315 Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
4) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
5) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
6) SWIVEL SLING FRONT 29P 0070STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle
C
Nonestab
7) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
8) BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR[70]()
Specification : BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR
C
Nonestab
9) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
10) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]()
Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
C
Nonestab
11) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
12) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
2) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN RETAINING LOCKING CATCH TO D S CAT NO 5315 001773 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1221[70]()
Specification : AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]()
Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
2) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
3) SUPPLY OF PIN AXIS HAMMER TO DS CAT NO 5315 009115 DC NO[70]()
Specification : AS PER DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION
C
Nonestab
4) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
5) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
6) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
7) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
2) 6191700018 BRAKE RING BIG FOR PINAKA ROCKET
Description : 6191700018 BRAKE RING BIG FOR PINAKA ROCKET()
Specification : BRAKE RING (BIG) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 002 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PRESSURE PAD COVER
Description : PRESSURE PAD COVER()
Specification : PRESSURE PAD COVER TO DRG. PT NO. ITX-280 DC 35916-A DT.21.02.95.
C
Estab
Category : p
Grade : 2
Size :
S
1132
CYRONICS INSTRUMENTS PVT LTD
NO 11, ELECTRONIC CO OPERATIVE ESTATE, PUNE SATARA ROAD, PUNE NO 11, ELECTRONIC CO OPERATIVE ESTATE, PUNE SATARA ROAD, PUNE PUNE MAHARASHTRA
PIN1 : 411009
Phone No. : 9922998220
1) WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B
Description : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B()
Specification : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF
1 WIRE NO 1 TO DRG NO FS 2800 B
2 CONNECTOR PIN TO DRG NO FS 2802A AND
3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B
Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1135
Anupam Enterprise
113, Park Street
Poddar Point, Block-B, Room No.: 502 Park Street Kolkata West Bengal
PIN1 : 700016
Phone No. : 9830063651
GSTIN : 19ABPFA9137J1ZT
1) READY MIXED WHITE PAINT IS 168 1993 L F NO 1011308002[10]()
Specification : PAINT R.M. AIR DRYING SEMI GLOSSY FINISH WHITE BRUSHING TO = SPECN:IS:168-1993 SECOND REVISION WITH AMENDMENT NO 1&2 {AS APPLICABLE FOR DEFENCE USE.
P
Nonestab
2) PAINT TURQUOISE BLUE L F NO 1011308102[10]()
Specification : PAINT R.M.AIR DRYING MATT.BRUSHING TURQUOISE BLUE ISC.NO-102 OF IS-5-2007 TO SPECN.IS-168-1993 THIRD REVISION {AS APPLICABLE FOR DEFENCE USE}.FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE BY OFM
P
Nonestab
3) PAINT RMADS GL GREEN BRUNSWICK L F NO 1011312225[10]()
Specification : PAINT READY MIXED AIR DRYING SEMI GLOSSY FOR GENERAL PURPOSE GREEN BRUNSWICK LIGHT ISC-225 OF IS-5-2007 SPRAYING TO SPECN.IS-168-1993 (AS APPLICABLE FOR DEFENCE USE).
P
Nonestab
4) R M PAINT DEEP BRONZE GREEN L F NO 1011508224[10]()
Specification : READY MIXED PAINT AIR DRYING MATT.BRUSHING{ISC224 IS:5-2007 DEEP BRONZE GREEN}TO SPECN.IS-168-1993 [AS APPLICABLE FOR DEFENCE USE]. FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE PROVIDED BY OFM
P
Nonestab
5) PAINT RMAD BUFF MIDDLE SPRAYIN L F NO 1011517359[10]()
Specification : PAINT R.M AIR DRYING SEMI GLOSSY FINISH ISC-359 OF IS-5 2007 BUFF MIDDLE SPRAYING TO SPECN IS-168-1993 [IIIrd REVISION ADDITIONAL REQUIREMENTS TO IS-168-1993 AS APPLICABLE FOR DEFENCE USE,VISCOSITY OF PAINT SHOULD BE SUITABLE FOR USE WIT
P
Nonestab
6) PAINT RED OXIDE IS 2074 1992 L F NO 1011700446[10]()
Specification : READY MIXED PAINT AIR DRYING RED OXIDE ZINC CHROME PRIMING TO SPECN.IS:2074-1992.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1136
CENTRAL TOOL ROOM & TRAINING CENTRE
Bonhooghly Industrial Area Bonhooghly Industrial Area KOLKATA West Bengal
PIN1 : 700108
Phone No. : 0332577635
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING
Description : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING()
Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT
Description : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Estab
Category : p
Grade : 3
Size :
S
1137
MAITY ENTERPRISE
AMRITA LAL DAWN ROAD BARANAGAR,ALAMBAZAR KOLKATA West Bengal
PIN1 : 700035
Phone No. : 9339356733
GSTIN : 19AHNPM5667K1ZH
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING[91]()
Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING
C
Nonestab
2) MACHINING AND PROCESSING OF AL ROD 22 MM DIA TO PRODUCE CASE IN FINISHED CONDITION TO DRG PT NO IQX 318 WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF AL ROD 22 MM DIA +0.25 MM TO PRODUCE "CASE" IN FINISHED CONDITION TO DRG PT NO IQX-318 (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE RUDRA[63]()
Specification : STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE-RUDRA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010[63]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Machining of AL Alloy Rod to produce ADAPTER Nut as per drg no 4 025998 Det No 075 in FC for 125mm HEAT Without surface coating painting operation[91]()
Specification : Machining of AL Alloy Rod (I/Code-0611601060) to produce ADAPTER Nut as per drg. no. 4-025998 Det. No. 075 in F/C for 125mm HEAT. Without surface coating/painting operation
R
Nonestab
2) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 022 in FC for 125mm HEAT[91]()
Specification : Machining of Copper Tube (Item Code-070855832) to produce Obturating Band as per drg. no. 4-025998 Det. No. 022 in F/C for 125mm HEAT.
C
Nonestab
3) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 095 in FC for 125mm HEAT[91]()
Specification : Machining of Copper Tube (Item Code-070855831) to produce Obturating Band as per drg. no. 4-025998 Det. No. 095 in F/C for 125mm HEAT.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE RUDRA[63]()
Specification : STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE-RUDRA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS 970 PT 1 1983 FOR CONVERSION IN CONTACT TO DRG 4 025998 059 TO SKETCH NO OTF S 011 BEFORE TIN PLATING OPERATION INPUT MATERIAL IC 0142007013 IC 9140070998[91]()
Specification : Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS:970 PT-1-1983 FOR CONVERSION IN CONTACT TO DRG. 4-025998 059 (TO SKETCH NO. OTF/S/011) BEFORE TIN PLATING OPERATION (INPUT MATERIAL I/C:0142007013) (IC:9140070998)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TUBE BLANK TO DRG NO OTF S 006 FOR 125 mm HEAT SHELL[63]()
Specification : TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E[61]()
Specification : AS PER DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RETAINER TO DRG NO 9002 00 01 00 00 003 00TA IN FINISH CONDITION[62]()
Specification : RETAINER TO DRG. NO. 9002-00-01-00-00-003-00TA IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) NUT TO DET NO 2 16 OF DRG NO 3 024045 IN FC TO SK NO OTF DD 006[64]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CAP TO SK NO OTF PG 002 IN FC[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) NUT IN FC TO SK NO OTF PG 003[64]()
Specification : AS PER DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
2) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]()
Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380)
R
Nonestab
3) MACHINING AND PROCESSING OF BODY FOR 76 POINT 2 MM PRE FRAG GSF SK M 7921 A[91]()
Specification : MACHINING AND PROCESSING OF BODY FOR 76.2 MM PRE FRAG GSF SK M-7921 A
C
Nonestab
4) SET OF TRACER NUT AXLE PIN SEMI RING[62]()
Specification : SET OF TRACER NUT TO (DRG. NO. 4-025998-036), AXLE PIN TO (DRG. NO. 4-025998-025), SEMI RING TO DRG NO (4-025998-076), ( 1 SET+ CONSIST OF AXLE PIN 06 NOS, TRACER NUT 01 NO, SEMI RING 2 NOS,) FOR STABILIZER OF 125 MM HEAT
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BLANK FOR DISTANCE TUBE TO OFAJ DRG NO CC 533 C[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SEMI MACHINED BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H AND PERIPHERAL GRAIN GROWTH 1MM MAX ON RADIUS[63]()
Specification : SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS"
C
Nonestab
2) FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO DC 154 D PGG[63]()
Specification : FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO. DC-154 D PGG 1.8MM (MAX) ON RADIUS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709[63]()
Specification : BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709,
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
2) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]()
Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]()
Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY CAP TO DRG NO IQX 14 IN FC WITHOUT PAINTING AND PASSIVATION FOR FUZE 162 MK 9[63]()
Specification : SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9
C
Nonestab
2) SAFETY CAP IN FC MC WITHOUT PAINTING AND PASSIVATION TO DRG NO IAFD 44 PT NO IQX 14 FOR FUZE 162 MK 8[63]()
Specification : SAFETY CAP IN F/C MC WITHOUT PAINTING AND PASSIVATION TO DRG. NO. IAFD-44 PT. NO. IQX-14 DC 35445-A DT 05-02-93 FOR FUZE 162 MK 8
C
Nonestab
Category :
Grade : Grade III
Size :
S
1138
TE CONNECTIVITY INDIA PVT LTD
TE PARK # 22B Doddenakundi 2nd Phase , Industrial Area, BANGALORE Karnataka
PIN1 : 560048
Phone No. : 8308303228
GSTIN : 29AABCT7374C1Z7
1) WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B
Description : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B()
Specification : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF
1 WIRE NO 1 TO DRG NO FS 2800 B
2 CONNECTOR PIN TO DRG NO FS 2802A AND
3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B
C
Estab
Category : dp
Grade : 3
Size :
S
1139
TIRUPATI INDUSTRIES PROP. TIRUPATI COMPONENTS PVT. LTD.
3/1, RAM SARAN PODDAR LANE RAM SARAN PODDAR LANE KOLKATA West Bengal
PIN1 : 700053
Phone No. : 24002082
GSTIN : 19AAACT9221B1ZL
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Machining of AL Alloy Rod to produce ADAPTER Nut as per drg no 4 025998 Det No 075 in FC for 125mm HEAT Without surface coating painting operation[91]()
Specification : Machining of AL Alloy Rod (I/Code-0611601060) to produce ADAPTER Nut as per drg. no. 4-025998 Det. No. 075 in F/C for 125mm HEAT. Without surface coating/painting operation
R
Nonestab
2) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 022 in FC for 125mm HEAT[91]()
Specification : Machining of Copper Tube (Item Code-070855832) to produce Obturating Band as per drg. no. 4-025998 Det. No. 022 in F/C for 125mm HEAT.
C
Nonestab
3) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 095 in FC for 125mm HEAT[91]()
Specification : Machining of Copper Tube (Item Code-070855831) to produce Obturating Band as per drg. no. 4-025998 Det. No. 095 in F/C for 125mm HEAT.
