List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
961 shubh swasan (india) private limited
39,Hunters Road hunters road chennai Tamil Nadu
PIN1 : 600112
Phone No. : 25324115
GSTIN : 33aaecs0963r1zw 		CHES15130D

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) THERMAL BONDED BATTING POLYESTER 100 GSM 150 CM WIDTH[21]() Specification : AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) POLY FILL 100 PERCENT POLYESTER 100 GSM WITH PRE QUILTED NON WOVEN WEB LINING WIDTH 150 CM MIN[21]() Specification : POLY FILL (100 % POLYESTER) 100 GSM WITH PRE-QUILTED NON-WOVEN WEB LINING WIDTH 150 CM MIN. Specification - APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC POLYESTER WHITE WIND CHEATER 115 GSM WIDTH 150CM MIN[21]() Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
2) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]() Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX. SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT R Estab
3) SET OF INNER FILLING INSULATION MATERIAL A AND B INNER JACKET THERMO PLASTIC POLYMER[21]() Specification : SET OF INNER FILLING INSULATION MATERIAL 'A' & 'B' (INNER JACKET) THERMO PLASTIC POLYMER - MATERIAL 'A' - 60GSM, WIDTH 150 CM (MIN.), CLO VALUE > 1.0 AND MATERIAL 'B' - 100 GSM WIDTH 150 CM (MIN.), CLO VALUE >2.0 SPECIFICATION :- AS P R Estab
4) INNER FILLING INSULATION MATERIAL OUTER JACKET THERMO PLASTIC POLYMER 110 GSM WIDTH 150 CM MIN[21]() Specification : INNER FILLING INSULATION MATERIAL (OUTER JACKET) THERMO PLASTIC POLYMER 110 GSM WIDTH 150 CM. (MIN.) SPECIFICATION :- AS PER APPENDIX 'C' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTERN 180 + 2 CM (NO NEGATIVE TOLERANCE) WIDE() CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX- A & AS IN TE R
2) FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS() AS PER ANNEXURE A ATTACHED TO SPECN. NO. PROV. IND/TC/1550 R
Category : P
Grade : II
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) COMPLETE SUB ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP VER WITH ALL INPUT MATERIAL AND FABRICATION OF WIND CHEATER[21]() Specification : COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANN E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) CLOTH POLYPROPYLENE OG 115 CM WIDE[21]() Specification : CLOTH POLYPROPYLENE OG (TPO COATING)115 CM WIDE SPECN.- SPECIFICATION OF FABRIC AS PER REQUIREMENT OF GROUND SHEET OG SPECIFICATION NO. - JSS 8305-35:2014 EXCEPT THAT MATERIAL IS TO BE SUPPLIED IN MULTIPLE LENGTH OF 02m AND AS PER ANNEXU R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]() Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN. SPECIFICATION:- JSS 8305-32-2003 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) SUB ASSEMBLY OF WIND CHEATER FABRICATION WITH ALL INPUT MATERIAL FABRIC AND GARNITURE MATERIAL EXCEPT PLASTIC SLIDE FASTENERS[21]() Specification : Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with a E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Thermo plastic polymer inner filling insulation material 105 g 150cm width[21]() Specification : Thermo plastic polymer inner filling insulation material 105 g 150cm wide min Specification No Appendix E and Clause No 5/4/1 pre quilted white polyester batting The quilted polyester batting both side cover with non woven screen fabric R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Three Layer water proof breathable fabric Dual shade OG White 118 cm width[21]() Specification : As per Appendix 'A' of Prov. Specification No. IND/TC/4587(d) and amendment No.1 As per CQA (T&C)/PMS/35 d except that fabric will be supplied roll form only as per CQA (T&C) Kanpur QAI No. CQA(T&C)/QAI/99 TC-11 R Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC NYLON KNITTED ALUMINIZED COATED 100 CM MIN[21]() Specification : Specification -IND/TC0161 As per relevant clause of specification R Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) NON WOVEN POLYESTER BATTING 140GSM WIDTH 150CM[21]() Specification : NON WOVEN POLYESTER FABRIC BATTING (HOLLOW POLYESTER FIBRE) 140GSM WIDTH 150CM (min) SPECIFICATION as per Appendix I of Schedule No DMSRDE/CPSG/2006/1 R Estab
Category :
Grade : Grade III
Size : S
962 Ess Kay Iron Works
85/A Industrila estate Pologround Indore 452015 Madhya Pradesh Indore Madhya Pradesh
PIN1 : 452015
Phone No. : 4973320
GSTIN : 23ACXPJ8908P1ZN 		BPLS06597D

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)[70]() Specification : AS PER DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) C Nonestab
2) WASHER TUBE RECOIL TO D S CAT NO 5310 003174 DC NO 24283 SA DT 09 03 99 FOR DC NO LATEST ISSUE TO BE FOLLOWED FIRMS MATERIAL IN FULLY FINISHED CONDITION[70]() Specification : AS PER D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION) C Nonestab
3) SEAMLESS TUBE 16MM 10 287 MM IS 5517 1993 DESGN 42 Cr4 Mo2 LRS 63mm ICR1242[70]() Specification : as per SEAMLESS TUBE 16MMx10.287MM IS:5517-1993, DESGN. 42 Cr4 Mo2 LRS 63mm(ICR1242) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)[70]() Specification : AS PER DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) WASHER TUBE RECOIL TO D S CAT NO 5310 003174 DC NO 24283 SA DT 09 03 99 FOR DC NO LATEST ISSUE TO BE FOLLOWED FIRMS MATERIAL IN FULLY FINISHED CONDITION[70]() Specification : AS PER D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SEAMLESS TUBE 16MM 10 287 MM IS 5517 1993 DESGN 42 Cr4 Mo2 LRS 63mm ICR1242[70]() Specification : as per SEAMLESS TUBE 16MMx10.287MM IS:5517-1993, DESGN. 42 Cr4 Mo2 LRS 63mm(ICR1242) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) WASHER TUBE RECOIL TO D S CAT NO 5310 003174 DC NO 24283 SA DT 09 03 99 FOR DC NO LATEST ISSUE TO BE FOLLOWED FIRMS MATERIAL IN FULLY FINISHED CONDITION[70]() Specification : AS PER D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION) C Nonestab
2) SEAMLESS TUBE 16MM 10 287 MM IS 5517 1993 DESGN 42 Cr4 Mo2 LRS 63mm ICR1242[70]() Specification : as per SEAMLESS TUBE 16MMx10.287MM IS:5517-1993, DESGN. 42 Cr4 Mo2 LRS 63mm(ICR1242) R Nonestab
3) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]() Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL C Nonestab
4) SEAMLESS STEEL TUBE DIA 1 750 375 INCH WALL LENGTH 14 57 INCH SAE 4130 AMS 6360 normalized[01]() Specification : SEAMLESS STEEL TUBE DIA 1.750X.375 INCH WALL LENGTH 14.57 INCH -SAE 4130 AMS 6360 normalized R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SEAMLESS TUBE 16MM 10 287 MM IS 5517 1993 DESGN 42 Cr4 Mo2 LRS 63mm ICR1242[70]() Specification : as per SEAMLESS TUBE 16MMx10.287MM IS:5517-1993, DESGN. 42 Cr4 Mo2 LRS 63mm(ICR1242) R Nonestab
2) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]() Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL C Nonestab
3) SEAMLESS STEEL TUBE DIA 1 750 375 INCH WALL LENGTH 14 57 INCH SAE 4130 AMS 6360 normalized[01]() Specification : SEAMLESS STEEL TUBE DIA 1.750X.375 INCH WALL LENGTH 14.57 INCH -SAE 4130 AMS 6360 normalized R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) STAINLESS STEEL TUBE 125X100X830MM[70]() Specification : STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304. R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[70]() Specification : STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) steel tube OD 159[03]() Specification : steel tube OD 159 + 1.0/-0.6 mm, ID = 132.8 + 0.6/-1.0 mm, length = 700 +/- 2.0 mm as per specn: BS 970 GR 817 m 40 (EN24) for AFT Motor of RGB 60 EN24 R Nonestab
2) STEEL TUBE FOR INNER CYLINDER OF RGB 60[03]() Specification : STEEL TUBE SPCN:BS 970 GR 817 M 40(EN24) OD=159.0 +/-0.6MM, ID=132.8+/0.6MM,LENGTH=170.0+/-2MM,OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM FOR INNER CYLINDER OF RGB60 R Nonestab
3) STEEL TUBE FOR CF MOTOR OF RGB 60[03]() Specification : STEEL TUBE AS PER SPCN:BS 970 GR 817 M 40(EN24) SIZE:OD 180 (+0/-2.0)MM, ID 155(+2.0/-0)MM IN THE LENGTH OF 2M OR ITS MULTIPLES FOR CF MOTOR OF RGB 60 R Nonestab
4) STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER[03]() Specification : SUPPLY OF STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER AS PER SPECIFICATION: BS 970 GR 817 M 40(EN 24) OD=219+/-0.7MM,ID= 199.8+/-0.6MM,LENGTH=215.0 +/-2MM OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) STEEL TUBE OD 65, ID 51MM[33]() Specification : ASTM A 106 GR B R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) Liner for RGB[01]() Specification : LINER FOR RGB 60 DRG.NO.NASK 1062/3.L.F.NO.0126701684 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) STEEL TUBES OR PIPES VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) STEEL TUBE COLD DRAWN SEAMLESS 42 POINT 4 MM[21]() Specification : IS: 3601, C.D.S. 310 R Estab
2) STEEL TUBE COLD DRAWN SEAMLESS 32 POINT 4 MM OD X 27 POINT 4 MM ID[21]() Specification : IS: 3601, C.D.S. 310 R Estab
3) STEEL TUBE COLD DRAWN SEAMLESS 26 POINT 9 MM OD X 2 POINT 6 MM W T[21]() Specification : IS: 3601 , C.D.S. 310 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COLD DRAWN SEAMLESS TUBE[01]() Specification : COLD DRAWN SEAMLESS TUBE OD 16MM X ID 10.287 MM IS : 5517-1993 DESIGN 42 CR4MO2, LRS 63MM (ICR 1242) ECCENTRICITY TO +/- 10% OF THE MEAN WALL THICKNESS IS ACCEPTABLE. TUBE TO BE CYLINDRICAL SMOOTH AND FREE FROM ALL SURFACE DEFECTS. HARDNE R Estab
Category :
Grade : Grade III
Size : S
963 FERRUM ENTERPRISES
1/5, RAJA RAM DAS LANE, HOWRAH HOWRAH WEST BENGAL
PIN1 : 711101
Phone No. : 033-26434929
GSTIN : 19AICPG7430N1Z0 		AICPG7430N

Download 		1) High Explosive Factory
Name Specification Use Status
1) FILLING HOLE PLUG(ALUMN)() CQA(A)1504(E) DC-35870-A C Not Estab
2) STRIKER (DET 3 PART)() CQA(A)1504(E) DC35870-A C Not Estab
3) STRIKER LEVER MKG() ITW/6GE & PART NO.ITW/67 C Not Estab
4) RETAINING PIN & RING() CQA(A)1504(E) DC 35870-A C Not Estab
Category : P
Grade : III
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX-331 DC NO.- 37263, DT 26.08.2010 Description : STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX-331 DC NO.- 37263, DT 26.08.2010() Specification : AS PER REQUIRED SPECIFICATION C Estab
2) PIN HINGE IN F CON FD 1252 QX 1248 Description : PIN HINGE IN F CON FD 1252 QX 1248() Specification : PIN HINGE IN F CON FD 1252 QX 1248 C Estab
3) STOP PIN M 10112 A IN FINISHED CONDITION Description : STOP PIN M 10112 A IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
4) PIN HINGE QX 1248 IN FINISHED CONDITION Description : PIN HINGE QX 1248 IN FINISHED CONDITION() Specification : PIN HINGE TO DRG NO QX-1248 IN F/C C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PIN IMBALANCE FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2439A00015 C Nonestab
2) PIN FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2440803007 C Nonestab
3) Pin shearing for Shell 155mm Illg. M1A1[63]() Specification : Drg. No. 2439A00009 C Nonestab
4) Pin spring for Shell 155mm Illg. M1A1[63]() Specification : Drg. No. 2440A03028 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Pin twisting for Shell 105mm IFG Illg. 2A [62]() Specification : D-6P-A-179/1/4 Pt.No. ISX 373 C Nonestab
2) Pin Shearing for 105mm Illg.[62]() Specification : Drg. No. D6P-A-179/1/3 Part No. ISX 372 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Pin Locking for 51mm Illg. [62]() Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d) C Estab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7[60]() Specification : CQA(A) 2324 C Nonestab
2) TAIL UNIT 1A FOR BOMB 81 MM[60]() Specification : CQA(A)2308 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CTD 81 MM MOR BOMB 3A EMPTY IRE 3GE[60]() Specification : CQA (A) 2348 C Nonestab
2) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) NOTCHED COIL TO ARDE 1933 PT ITV169[60]() Specification : CQA (A) 2322 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CHAMBER FOR DET.NO.36M GRENADE 4[64]() Specification : DESIGN REF.NO. CIA/AMMN/474/PART NO.QX 40 WITH AIDE MEMORIE NO. C7/5 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY PROJECTILE[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
2) INTERMEDIATE CASE DRG NO.KF/PJ/SK-2[60]() Specification : CQA[A] SEALED DRG NO 04-749-130222-02.1E C Nonestab
3) IGNITER CASING DRG.NO.KF/PJ/SK/-5[60]() Specification : CQA(A) SEALED DRG NO 04-749-130222-03.1E C Nonestab
4) SMOKE COMP.CASING DRG.NO.KF/PJ/SK12[60]() Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E C Nonestab
5) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE[60]() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A C Nonestab
6) SWITCH NO. 4 PULL MK-1/L EMPTY ASSLY.[64]() Specification : DRG. NO. DD(L) 15250 C Nonestab
7) IGNITION ELEMENT04-44-79000-06105-4E[99]() Specification : DRG.NO. 04-44-79000-06105-4E C Nonestab
8) INNER CASE DRG 04-44-79000-06103-3E[99]() Specification : DRG. NO. 04-44-79000-06103-3E C Nonestab
9) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
10) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]() Specification : CQA(A) 1504 C Nonestab
2) HOUSING DELAY SHT 2 SPECN CIA-1804[61]() Specification : CQA(A)1804 C Nonestab
3) SET SCREW SLOTTED HD NO 2 BA[17]() Specification : DESIGN REF CIA/AMN/885 C Nonestab
4) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
5) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
6) FIRING PIN TO CQA DRG 04-749-13022[60]() Specification : CQA[A] SEALED DRG NO.04-749-130222-03.2E C Nonestab
7) SPACER RING DRG.NO.04-749-130222-03[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-03.4E C Nonestab
8) CENTER PIECE (MODIFIED) FOR GRENADE[60]() Specification : DRG.NO. AFK/SK/798-14 C Nonestab
9) STRIKER DET 3 PART ITW 65 DC (I)[61]() Specification : CQA(A) 1504 C Nonestab
10) CENTRE PIECE DET 2 PT ITW 64 DC (I)[61]() Specification : CQA(A) 1504 C Nonestab
11) RETAINING PIN & RING DET 6 PT ITW-10[61]() Specification : CQA(A) 1504 C Nonestab
12) FILLING HOLE PLUG(ALUMN)[61]() Specification : CQA(A)1504 C Nonestab
13) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804[61]() Specification : CQA(A)1804 C Nonestab
14) MINE APM CONSISTING OF BODY,SPOOL[61]() Specification : CQA(A) 1804 C Nonestab
15) PLUNGER DRG.NO.04-44-79000-06111-4 E[63]() Specification : DRG. NO. 04-44-79000- 06111-4 E C Nonestab
16) PLUNGER GUIDE 04-44-79000-06112-4 E[63]() Specification : DRG NO.04-44- 79000-06112-4 E C Nonestab
17) FIRING BOLT[60]() Specification : CQA[A] SEALED DRG.NO. 04-749-130222-04.1E C Nonestab
Category : p
Grade : Grade III
Size : S
964 BAGARIA TIMBER PVT. LTD
C-41, MIDC INDUSTRIAL AREA NAGPUR MAHARASHTRA
PIN1 : 440016
Phone No. : 7304422211,7104237366
GSTIN : 27AAACB6188R1ZX 		NGPB00069G

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) BOX CARTRIDGE LTPE WOOD() DRG NO. OFBA PE 12 DT. 08.05.01 C ETABLISHED
2) CRATE 5AL WIRE BOUND FOR PACKING AMMUNITION 79A() DRG NO. OFBA CX 55 DTD. 16/08/94 AMENDED ON 15/02/2012 C ESTABLISHED
3) REEL 1 A/L FOR PACKING AMMUNITION 79 A() DRG NO. OFBA/CX 54 DT.08.04.93 C ESTAB.
4) UNIT LOAD FOR 155 CHARGE M4A2() DRG NO. 13646-4-0 DC NO. 35707-A CFA DRG NO. 13-S-003 C ESTAB.
5) BOX C-26 A WOOD() DRG. NO. CIA AMMN.1773 DC 35922 A DT.23.02.95 & SPC. 1A-948(a,f) DC-36081 C ESTAB.
6) WOODEN BOX FOR BPC (4W-20)() DRG. NO. AI(J)245 C ESTAB.
7) CASE HEMK-I (MODIFIED) L.A. WOOD() DRG. NO. IND ME 29 DC NO. 3604 ME DTD. 13.12.99 C ESTAB.
8) BOX WOOD PZ-I() DRG. NO. ARDE 1953 SHEET NO. 1,2,3 & DET NO.4 OFBA RK 504,505,506,507 C ESTAB.
9) BOX PETN RDX I A-L WOOD FOR PACKING PETN RDX() DRG. NO. IND MET 59 DC NO. 3604ME DT. 13.12.99 C ESTAB.
10) CASE C-128 MK-13,L() DRG. NO. IA-1031 & SPEC. NO. IA-948 (a,f) C ESTAB.
11) WOODEN BOX FOR BPC (5b-84)() drg. no. nask 829 (P) DTD. 03.08.2000 OFBA RK. 422 C ESTAB.
Category : P
Grade : II
Size : S
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) PLYWOOD 2270501000 Description : PLYWOOD 2270501000() Specification : TIMBER PLYWOOD TYPE AA GRADE MR SIZE 3mm THICK x 3PLY 1.2m x 1.2m, TO SPECN:- IS-303-1989 (THIRD REVISION) WITH AMEND-MENT NO 1-NOV-92 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) TIMBER MANGO[22]() Specification : IND/ME/ 883(f) (PROV.) R Estab
2) AMMN. CONTAINER BOX M - 32A[65]() Specification : ISV- 548 A R Estab
3) BOX S-9 (WOODEN)[65]() Specification : NAI (V) - 5502 (P) R Nonestab
4) 6295254902 UNIT LOAD (M.O.P. 12) FOR 155MM (BT)[62]() Specification : UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007 C Nonestab
5) 6295254901 UNIT LOAD (MOP) FOR SHELL 155 MM BB[62]() Specification : UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007 C Nonestab
6) 6576773600 PACKING BOX FOR HDC-1[65]() Specification : PACKING BOX FOR HDC-1 TO DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12) C Nonestab
7) 6576773601 PACKING BOX FOR HDC-2[65]() Specification : PACKING BOX FOR HDC-2 TO DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Chanda
Name Specification Use Status
1) TIMBER MANGO[22]() Specification : IND/ME/ 883(f) (PROV.) R Nonestab
2) AMMN. CONTAINER BOX M - 32A[65]() Specification : ISV- 548 A C Nonestab
3) BOX S-9 (WOODEN)[65]() Specification : NAI (V) - 5502 (P) C Nonestab
4) 6295254902 UNIT LOAD (M.O.P. 12) FOR 155MM (BT)[62]() Specification : UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007 C Nonestab
5) 6295254901 UNIT LOAD (MOP) FOR SHELL 155 MM BB[62]() Specification : UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007 C Nonestab
6) 6576773600 PACKING BOX FOR HDC-1[65]() Specification : PACKING BOX FOR HDC-1 TO DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12) C Nonestab
7) 6576773601 PACKING BOX FOR HDC-2[65]() Specification : PACKING BOX FOR HDC-2 TO DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE C Nonestab
8) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]() Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Nonestab
9) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]() Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Nonestab
10) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]() Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Nonestab
11) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]() Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Nonestab
12) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]() Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008 C Nonestab
13) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]() Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Nonestab
14) 2255050116 TIMBER N C SIZE 110MM X 16MM[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
15) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]() Specification : IND/ME/883(F)(PROV) R Nonestab
16) 2255400600 TIMBER N C SIZE 210MM X 25MM[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
17) 2255408514 TIMBER N C SIZE 240MM X 22MM[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
18) 2270353012 PLY WOOD 3 MM BWR BB[22]() Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY R Nonestab
19) 2270460637 PLY WOOD 12 MM MR AA[22]() Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY. R Nonestab
20) 2270403354 PLY WOOD 6 MMX 2.40M X1.20M BWR/AB[22]() Specification : SPECN. IS: 303 -1989 (THIRD REVISION) (AMENDMENT NO. 2) R Nonestab
21) 2270441000 PLY WOOD 3 MM CWR[22]() Specification : PLYWOOD FOR GENERAL PURPOSES MR GRADE TYPE AB SIZE 2.40 M X 1.20 M X 3 MM THICK (3 PLY) TO SPECN. IS: 303-1989, THIRD REV., AMDT. 2, REAFFIRMED 1998 R Nonestab
22) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]() Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008 C Nonestab
23) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]() Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008 C Nonestab
24) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
25) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]() Specification : IND/ME/883(F)(PROV) R Nonestab
26) 2255526024 TIMBER N C SIZE 75 75 MM[22]() Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002. R Nonestab
27) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]() Specification : SPECN. NO. IND/ME/883 (F) (PROV) R Nonestab
28) 2255540403 TIMBER N C SIZE 60 X 130MM[22]() Specification : IND/ME/883 (F) (PROV) R Nonestab
29) 2270441354 PLY WOOD 3 MM[22]() Specification : IS:303-1989 R Nonestab
30) 2270463030 PLY WOOD 4 MM[22]() Specification : IS:303 -1989 R Nonestab
31) 2270463342 PLY WOOD 6 MM[22]() Specification : IS-303 - 1989 R Nonestab
32) 2270528358 PLY WOOD 8 MM[22]() Specification : IS: 303-1989 R Nonestab
Category : P
Grade : I
Size :
965 IMPERIAL ENGINEERING COMPANY
57, PHASE -II INDUSTRIAL STATE, YAMUNA NAGAR YAMUNA NAGAR HARYANA
PIN1 : 135001
Phone No. : 01732-265153, 09215526393
GSTIN : 06AAFFI5436H1ZF 		RTKI02423B

Download 		1) Ordnance Factory Varangaon
Name Specification Use Status
1) CARRIER 7A/L() IA 1169(n) DC No. 35576-A DT 08.09.93 E NOT ESTAB.
Category : P
Grade : III
Size : S
966 RAMAN LAAMINATORS
148 SEC 57 PHASE 4 HSIIDC KUNDLI KUNDLI SONEPAT Haryana
PIN1 : 131028
Phone No. : 9891080222
GSTIN : 06AIAPB6540L1ZH 		DELV21077A

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Self Adhesive Polythene Bag various sizes 40x35 cm 48x38 cm 45x32cm No minus tolerance[21]() Specification : CQA(GS)/US/434(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Self Adhesive Polythene Bag 50 X 35 cm[21]() Specification : CQA(GS)/US/434(a) C Nonestab
2) Self Adhesive Polythene Bags 47 x 35 CM[21]() Specification : CQA(GS)/US/434(a) E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath
Name Specification Use Status
1) POLYTHENE BAG FOR 130 MM CARTRIDGE CASE[25]() Specification : POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1. E Nonestab
2) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG CASE[21]() Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath
Name Specification Use Status
1) VCI POLYTHENE BAGS FOR 30 MM SARATH[21]() Specification : AS PER SPECIFICATION / DRAWING REQUIREMENT MENTIONED IN OUR OTE PUBLISHED FOR THE ITEM IN OUR E-PROC SITE. E Estab
2) VCI POLYTHENE BAG FOR 20 MM AMR[21]() Specification : AS PER THE SPECIFICATION MENTIONED IN THE OTE PUBLISHED FOR THE ITEM VIDE TENDER REFERENCE NO.111MMETT18001239. E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath
Name Specification Use Status
1) POLYTHENE BAG FOR 130 MM CARTRIDGE CASE[25]() Specification : POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1. E Estab
2) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG CASE[21]() Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED E Estab
3) VCI POLYTHENE BAGS FOR 30 MM SARATH[21]() Specification : AS PER SPECIFICATION / DRAWING REQUIREMENT MENTIONED IN OUR OTE PUBLISHED FOR THE ITEM IN OUR E-PROC SITE. E Estab
4) POLYTHENE BAG RW142[25]() Specification : JSS;9330-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1. E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath
Name Specification Use Status
1) POLYTHENE BAG RW142[25]() Specification : JSS;9330-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1. E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath
Name Specification Use Status
1) POLYTHENE BAG RW142[25]() Specification : JSS;9330-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1. E Nonestab
Category :
Grade : Grade III
Size : S
967 BRITEX ENGINEERING WORKS
R-209,TTC INDL AREA MIDC RABALE, NAVI-MUMBAI MAHARASHTRA
PIN1 : 400701
Phone No. : 9122-27640846,27640844,27640875,MOBILE NO-09819534204 		MUMB13818A

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FORGING FOR DRIVE SHAFT() DRG.NO.FG-765-15-152-3 R Not Estab
Category : DDP
Grade : II
Size : S
1) Field Gun Factory Kanpur
Name Specification Use Status
1) FORGING ITEM (UP TO 100 TONS)() AS PER DRG. & SPECIFICATION 1 Estab.
Category : P
Grade : II
Size : M
968 Century Threads (P) Ltd,
41E, Chaulpatty Road, Beleghata, Kolkata, West Bengal
PIN1 : 700010
Phone No. : 033-23720407 / 09748775586
GSTIN : 19AAACC9960E1ZI 		CALC05964A

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) All Types of Sewing Threads() As per Specification & Requirement C Not Estab.
Category : P
Grade : I
Size : S
969 BABA TECHNOCRAFT & MANUFACTURERS PVT. LTD.,
5-5-35/310 & 311, PLOT NO.14, MYTHRI NAGAR KUKATPALLY IDA Telangana
PIN1 : 500072
Phone No. : 23075383
GSTIN : 36AAFCB0442F1Z5 		HYDB06787E

Download 		1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEADROCKET BODY (PRE MACHINED) FOR RGB-60 () AS PER DRG.NO 0 ROC 060 1 23 0 REV.0 AND MONTRAY INSTRUCTION R NOT ESTAB
Category : DDP,DP
Grade : II
Size : S
970 AGRAWAL METAL WORKS PVT. LTD.
SP-144, RIICO IND AREA, PHASE-1 BHIWADI RAJASTHAN
PIN1 : 301019
Phone No. : 01493 304900, 304901
GSTIN : 08AABCA4897R1ZT 		RTKA01641D

Download 		1) Ordnance Factory Katni
Name Specification Use Status
1) Cold Rolled Gilding Metal (90/10) coil/strips() Cold Rolled GM strips of range from 10 mm to 450 mm width and 0.05 mm to 3.0 mm thickness in coil form R Estab.
2) Brass Strips (70/30)() Brass strips of range from 10 mm to 450 mm width and 0.05 mm to 4.5 mm thickness in cut Length. R Estab.
3) Brass Strips (70/30)() Brass strips of range from 10 mm to 450 mm width and 0.05 mm to 3.0 mm thickness in coil form R Estab.
Category : DP
Grade : II
Size : L
971 GLOBE SCOTT MOTORS PVT. LTD.
A1/9, G.I.D.C., KILLA PARDI, DIST. VALSAD, GUJARAT DIST. VALSAD GUJARAT
PIN1 : 396125
Phone No. : 02602370306
GSTIN : 24AAACG1442R1ZJ 		AAACG1442R

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) MANUFACTURING OF SPECIFIC AC & DC MOTOR, WOUND FIELD DC MOTORS, PMDC MOTORS() AS PER REQUIREMENT
Category : DDP
Grade : I
Size : S
972 SETCO AUTO SYSTEMS PRIVATE LIMITED
VADODARA GODHRA HIGHWAY KALOL , PANCHMAHAL DISTRICT GUJARAT
PIN1 : 389330
Phone No. : 0267-270600 		AADCT6512A

Download 		1) Vehicle Factory Jabalpur

[Deemed Registration]
Name Specification Use Status
1) LPTA Assy 352 Dia Driven Disc and cover Description : LPTA Assy 352 Dia Driven Disc and cover() Specification : Assy 352 Dia Driven Disc &cover LPTA Part No. 275225000105 C Estab
Category : ddp
Grade : 3
Size : M
973 macario technologies private limited
E 48/10 Okhla industrial Area Maa Anandmayi street New Delhi Delhi
PIN1 : 110020
Phone No. : 40230158
GSTIN : 07AAKCS1163M1Z1 		AAKCS1163M

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) NC disc II for 125mm FSAPDS Practice LF 9911358706[99]() Specification : NC disc II for primary and secondary 125mm FSAPDS Practice drg. no. IRW 225 C Nonestab
Category :
Grade : Grade III
Size : S
974 R.G. Exim
84/20, Fazal Ganj, Kanpur UP
PIN1 : 208012
Phone No. : 0512-2221916, 9415131299
GSTIN : 09AAUPG0854A1ZT 		KNPRO1699F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) SADDLE CASUALTY MK-I OF SIZES() DRG. NO. IND/GS/1524 (b) (142/PK), 1526 (c) (49/PK), 1527 (b) R Established
2) SADDLE P&D PGS NO "O"() IND/GS/1264 (c) (4637/PK DT. 13.11.2001) R Established
3) SADDLE P&D PGS NO.2() AS PER REQUIREMENT & SPECIFICATION R Established
4) SADDLE PA BREACH MACHANISM ORD.OF 75/24A() AS PER REQUIREMENT & SPECIFICATION R Established
5) SADDLE PA CARRIAGE 75/24 A CARRIAGE WHEEL NEAR() AS PER REQUIREMENT & SPECIFICATION R Established
6) SADDLE PA UNIVERSAL() AS PER REQUIREMENT & SPECIFICATION R Established
7) SADDLE SU PATT 02 LARGE() AS PER REQUIREMENT & SPECIFICATION R Established
8) SADDLE SU PATT 02 MEDIUM() AS PER REQUIREMENT & SPECIFICATION R Established
9) SADDLE SU PATT-02 EXTRA SMALL() AS PER REQUIREMENT & SPECIFICATION R Established
10) SEAT (SADDLE SU PATT.02) COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Established
11) FLAP NEAR (SADDLE SU PATT.02). DRG.NO. IND/GS/1597(b)() AS PER REQUIREMENT & SPECIFICATION R Established
12) FLAP OFF (SADDLE SU PATT. 2). DRG.NO. IND/GS/1597 (b)() AS PER REQUIREMENT & SPECIFICATION R Established
13) FULL SOCKS LEATHER WITH EVA CUSION IN VARIOUS SIZES() AS PER REQUIREMENT & SPECIFICATION R Established
14) PANNEL PGS NO. 2 () IND/GS/1269(C) (4712/PK DT.08.06.86) R Established
15) COLLAR BREAST HPD MK-3() IND/GS/609 (e), DRG. ATTACHED (1977/PK DT.26.5.05) R Established
16) PANNEL PA() IND/GS/1225(B) R Established
17) ROPE JUTE H/L 8MM DIA() IS: 5177 LATEST R Established
18) SYNTHETIC GRIP BLACK FOR STRAP 32MM (FOR BAG)() AS PER REQUIREMENT & SPECIFICATION R Established
19) CORD COTTON OR ROPE COTTON OR LINE COTTON OR CORDAGE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
20) CORD COTTON BRAIDED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
21) CORD NYLON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
22) CORD NYLON BRAIDED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
23) ROPE POLYPROPELENE VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
24) ROPE BAGGAGE MK-I() JSS 3770-20 R Established
25) LINING FELT BROWN SHORT NO. 1() IND/GS/1269(E) R Established
26) PANNEL PGS NO.1() IND/GS/1269(C) R Established
27) COLLER BREAST PA LONG COMPLETE() IND/GS/1547 (A) R Established
28) CRUPPER PGS NO. 1 COMPLETE() IND/GS/1575 (A) R Established
29) REINS BRIDOON PGS COMPLETE() IND/GS/646 (D) R Established
30) STRAP GIRTH PGS NO. 0 COMPLETE() IND/GS/1593 R Established
31) HEAD BRIDLE SU LARGE COMPLETE() IND/GS/1544 R Established
32) BOOT POULTICE NO. 1 COMPLETE() IND/TC/3116 © R Established
33) SADDLE PA 76 MM MOUNTAIN GUN M-48 BIA-5 (YAGSTAVE) FORK THILL SAKPLE NO. 2827/PK() AS PER REQUIREMENT & SPECIFICATION R Non Established
34) SADDLE PA 76 MM MOUNTAIN GUN M-48 BIA-5 (YUGOSTAV) TREE METAL FRAME() AS PER REQUIREMENT & SPECIFICATION R Non Established
35) SADDLE PA BARREL FRONT AND SHIED ORD QR 75/24 (A)() AS PER REQUIREMENT & SPECIFICATION R Non Established
36) SADDLE PA BOBY CARRIAGE 75/24 A() AS PER REQUIREMENT & SPECIFICATION R Non Established
37) SADDLE PA CARRIAGE 75/24 A CARRIAGE WHEEL NEAR() AS PER REQUIREMENT & SPECIFICATION R Non Established
38) SADDLE PA RECUPERATOR CARRIAGE 75/24 A() AS PER REQUIREMENT & SPECIFICATION R Non Established
39) SADDLE PA SLIPPER AND TRAIL REAR CARRIAGE 75/24A() AS PER REQUIREMENT & SPECIFICATION R Non Established
40) SADLE CASUALTY SMALL MK-1() AS PER REQUIREMENT & SPECIFICATION R Non Established
41) LINING FELT BROWN SHORT NO. 0() 1023/PK R Non Established
42) LINING FELT BROWN SHORT NO. 1() IND/GS/1269(E) R Non Established
43) ROPE HEAD 274 CMS. COMPLETE() JSS-3-03-06 (5178/PK DT. 28.5.97) R Non Established
44) LINING FELT BROWN LONG NO. 1 COMPLETE() IND/GS/1269 (C) R Non Established
45) LINING FELT BROWN LONG NO. 2 COMPLETE() IND/GS/1269 (C) R Non Established
46) PANNEL PGS NO.1 COMPLETE() IND/GS/1269(C) R Non Established
47) PANNEL NEAR MK-3 COMPLETE() IND/GS/556 (C) R Non Established
48) PANNEL PGS NO. 0 COMPLETE() IND/GS/542 (F) R Non Established
49) PANNEL PGS NO. 00 COMPLETE() IND/GS/542 (F) R Non Established
50) PANNEL PGS STRAP NO. 2 COMPLETE() IND/GS/1269 (C) R Non Established
51) PANNEL PGS STRAP SHORT COMPLETE() IND/GS/1269 (C) R Non Established
52) COLLER BREAST PGS MK-II NO. 1 COMPLETE() IND/GS/1545 (A) R Non Established
53) FLAP NEAR (SADDLE SU PATT.02). DRG.NO. IND/GS/1597(b)() IND/GS/572 (c). R Non Established
54) LEATHER STIRRUP SU COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
55) SURSINGLE SU LARGE COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
56) CRUPPER PA LARGE COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
57) CRUPPER PA SMALL COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
58) CRUPPER PGS NO. 1 DOCK COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
59) CRUPPER PGS NO. 00 COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
60) REINS BRIDOON PGS COMPLETE() IND/GS/646 (D) R Non Established
61) REINS DRIVING LONG COMPLETE() E & S 4581 (I) (413/PK) R Non Established
62) REINS HALF REIN COMPLETE() IND/GS/536 (C) R Non Established
63) REINS BIT SU COMPLETE() IND/GS/827 (D) R Non Established
64) STRAP GIRTH PGS NO. 0 COMPLETE() IND/GS/1593 R Non Established
65) STRAP GIRTH PGS NO.1 COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
66) STRAP NECK COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
67) STRAP CLOCK GIRTH PA MK COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
68) STRAP SUPPORTING BREECHING PA COMPLETE() AS PER REQUIREMENT & SPECIFICATION R Non Established
69) HEAD BRIDLE SU SMALL COMPLETE() IND/GS/1544 R Non Established
70) HEAD BRIDOON PGS SMALL COMPLETE() IND/GS/648 (D) R Non Established
71) BREECHING PGS MK-4 NO. 0 COMPLETE() IND/GS/1588 R Non Established
72) BREECHING PGS MK-4 NO. 1 COMPLETE() IND/GS/1588 R Non Established
73) BOOT POULTICE NO. 1 COMPLETE() IND/TC/3116 (C) R Non Established
74) CAVISION COMPLETE() IND/GS/1658 (D) R Non Established
75) FRINGES BROW BAND COTTON 2 MM DIA BLUE() IND/GS/3357 (H) R Non Established
76) RUG HORSE ARCTIC MEDIUM COMPLETE() IND/TC/3005. R Non Established
Category : P
Grade : III
Size : S
975 AUSTENITE FORGE PRIVATE LIMITED
SURVEY NO. 1091, NEAR SANT FARM, RIBDA ARDOI ROAD,VILLAGE ARDOI,TALUKO ; KOTDA SANGANI, DIST; RAJKOT, GUJARAT INDIA ARDOI,TALUKO ; KOTDA SANGANI, DIST; RAJKOT, GUJARA RAJKOT Gujarat
PIN1 : 360030
Phone No. : 8141300700
GSTIN : 24AAPCA8589G1Z3 		RKTA05585G

Download 		1) Small Arms Factory
Name Specification Use Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]() Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ), C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ST FORG BLOCK GAS 4813-S*6 R5[03]() Specification : STEEL FORGING OF BLOCK GAS TO DRG.NO. RFI SK NO.4813-S*6, C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]() Specification : St. Forging Plate Bottom to DRG No. SKM-283*2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) St. Forging of BLOCK REAR TO Drg. No. MS-331*1 D.A. NO. 09/17[03]() Specification : AS PER DRG. C Nonestab
2) St. Forging Hammer Drg No. MS-332[04]() Specification : AS PER DRG. C Nonestab
3) Forging of Buffer Body DS CAT no. SKM-304*1[01]() Specification : AS PER DRG. C Nonestab
4) Forging of Breech Block slide DS CAT no. 281*2[04]() Specification : AS PER DRG. C Nonestab
5) Lever Locking DRG. No SKM-303*5[04]() Specification : As per DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]() Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG. C Nonestab
2) Steel Forging Block Gas(heavy) SKM-958(Prov.)[01]() Specification : AS PER DRG. C Nonestab
3) Steel Forging Block Gas for MAG 7.62 MM Drg No. SKM-957 (Prov.)[01]() Specification : AS PER DRG. C Nonestab
4) Forging of block front DSCAT no. SKM-282*4[01]() Specification : AS PER DRG. C Nonestab
5) St. Forging Buffer Body DRG. No SKM 304*1[01]() Specification : DRG. No SKM 304*1 C Nonestab
6) Steel Forging Piston Extension for JVPC[01]() Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STEEL FORGING BREACH BLOCK SLIDE[04]() Specification : STEEL FORGING BREACK BLOCK SLIDE DRG NO. SKM-281*2 ''NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGING MACRO ETCH AS PER ASTME -381 WITH ACCEPTANCE STANDARD AS C2,R2,S2 & NMIR TEST AS PER IS -4163-82 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]() Specification : St. Forging Plate Bottom to DRG No. SKM-283*2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Steel Forging Block Gas for JVPC[01]() Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Steel Forging Cylinder Gas[01]() Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG C Nonestab
2) Steel Forged Trigger for LMG[04]() Specification : STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) CASE PEGS NIGHT LINE MG MK-1[71]() Specification : CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION., C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PEGS NIGHT LINE MG MK I[70]() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Forging of Guide Front Right DRG. no. SKM-305*2[04]() Specification : Forging Guide Front Right SKM-305*2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Al. Forging for Body Cover DRG no. SKM-174*[06]() Specification : Al. Forging for Body Cover DRG No. SKM-174* R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
2) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
3) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
4) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
5) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
6) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED]. C Nonestab
7) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED). C Nonestab
8) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS. C Nonestab
9) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
10) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
11) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED]. C Nonestab
12) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]() Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS C Nonestab
2) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]() Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
3) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]() Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS C Nonestab
4) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]() Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES C Nonestab
5) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]() Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES. C Nonestab
6) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]() Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]() Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]() Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]() Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION. C Nonestab
4) WASHER TO DRG NO 219 35 186 TRACK T 90 L F NO 6120100106[61]() Specification : WASHER TO DRAWING NUMBER 219.35.186 {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 19903-74,GOST 1577-93,GOST 14959-79,520 TY 1 PROCESS SHEETS-COLD STAMPING, ISOTHERMAL HARDENING. C Nonestab
5) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
6) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
7) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
8) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
9) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
10) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
11) FILLING PLUG MCD 450 KG L F NO 6230400504[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
12) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
13) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
Category : ddp
Grade : 3
Size : S
976 SUJAN INDUSTRIES
Bldg.No: 1, Plot No: 1 & 2, Behind Blue chip Indl.Estate, Village Waliv, Sativali Udyog Nagar, Vasai (East), THANE Maharashtra
PIN1 : 401208
Phone No. : 0250-2456741
GSTIN : 27AAAFS7630J1Z1 		MUMS05572A

Download 		1) Ordnance Factory Medak
Name Specification Use Status
1) SEALS AND GASKETS() As per specification C Not Estab
2) RUBBER MOULDED AND RUBBER TO METAL BONDED ITEMS() - do - C Not Estab
Category : P
Grade : II
Size : S
977 T A ASSOCIATES
65, CHITTARANJAN AVENUE 65 CENTRAL AVENUE KOLKATA West Bengal
PIN1 : 700012
Phone No. : 22362137
GSTIN : 19ADQPA1036M1ZF 		ADQPA1036K

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) PLUNGER LOCKING TO PT BOF 5047131[90]() Specification : PLUNGER LOCKING TO PART BOF 5047131 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 2101222286 WOOL FELT PRESSED TYPE EXTRA HARD WHITE UNPROOFED 10MM THICK X 1320MM WIDE X STD LENGTH TO SPECN NO IS 1719 79[70]() Specification : 2101222286 WOOL FELT PRESSED TYPE EXTRA HARD WHITE UNPROOFED 10MM THICK X 1320MM WIDE X STD LENGTH TO SPECN NO IS 1719 79 R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) BUSH TO DRG NO BOF 6104226 6104226Y[90]() Specification : BUSH TO DRG.NO.BOF-6104226/6104226Y C Nonestab
Category :
Grade : Grade III
Size : S
978 GRAVITY DIE-CASTERS
Survey No. 636, Opp. Khanwadi, B/h. Ramol Police Station, Nr. Mahadev Estate-2, Ramol, Ahmedabad - 382449 Ramol Road, Ahmedabad Gujarat
PIN1 : 382449
Phone No. : 25854472
GSTIN : 24AABFG5440P1ZA 		AHMG00969D

Download 		1) Ordnance Factory Itarsi
Name Specification Use Status
1) SET OF CASTING MANDRELS(FRONT&REAR) FOR PINAKA() SPECIFICATION NO.54/PINAKA/GMP/OFI ,DT.01/09/2016 C Not Estab
Category : DP
Grade : II
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) MACHINING OF MECHANICAL COMPONENTS OF TNPO-170A (BODY & BOTTOM)() Specification : MACHINING OF MECHANICAL COMPONENTS OF TNPO-170A (BODY & BOTTOM) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) PRESSURE DIE CASTING OF BODY TNPO-170A[70]() Specification : PRESSURE DIE CASTING OF BODY TNPO-170A, DRG. No. B-26/DC/8020251/173 M1 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) Plug, 306-25.[62]() Specification : Plug, 306-25. C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUP (EMPTY) FOR DETONATOR 356 MG[64]() Specification : CUP (EMPTY) FOR DETONATOR 356 MG TO DRG. NO. QX-803, D. NO. D3(L)3934/F/83, DC NO.36103 A, DT.29.03.96. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) PLUG Description : PLUG() Specification : 305-08-2A E Estab
Category : ddp
Grade : 1
Size : M
979 DYNAMIC ELECTRO MECHANICAL SYSTEMS
Plot No 37, Sy.No:7, Sripuram Colony, Near Poosala Godowns, Chengicherla(V), Boduppal(P), Medipally(M), Medchal (D),Telangana-500 092, India Sripuram Colony Medchal Telangana
PIN1 : 500092
Phone No. : 9390259189
GSTIN : 36AANFD2991A1ZH 		AANFD2991A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SOCKET ASSY SH P 51 TO 7092322710[70]() Specification : SOCKET ASSY SH P-51 TO DRG. NO. 2BK.664.000CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DOUBLE WIRE LED LIGHT ASSY TO 6201070241[62]() Specification : DOUBLE WIRE LED LIGHT ASSY TO DRG NO. CQA(HV)5.70.136 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) CONTROL PANEL ASSEMBLY DRAWING TO 6206811186[62]() Specification : CONTROL PANEL ASSEMBLY DRAWING TO DRG NO. 902.02.000CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) ELECTRO MAGNET ASSY TO 6206506001[62]() Specification : ELECTRO MAGNET ASSY TO DRG NO. 432.17.004CB-2 C Nonestab
Category :
Grade : Grade III
Size : S
980 INDUSTRIAL SOLVENTS & CHEMICALS PVT LTD
101 ATLANTA 209 NARIMAN POINT MUMBAI 209 NARIMAN POINT MUMBAI Maharashtra
PIN1 : 400021
Phone No. : 22841180 		AAACI1068D

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Ether Solvent Grade Description : Ether Solvent Grade() Specification : ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018 R Estab
Category : ddp
Grade : 3
Size : S