1) 1418617801 CORRUGATED CARD BOARD SHEET A B C SIZES
Description : 1418617801 CORRUGATED CARD BOARD SHEET A B C SIZES()
Specification : CORRUGATED CARD BOARD SHEET(EACH SET CONSISTS OF (A) PACKINGSHEETI HEMRL/ED/DRG.NO.001 DET NO.1 SZ-600MM*225MM*32.5MM TK18 NOS/SET (B)PKG.SHEETII HEMRL/ED/DRG.001 DET NO.2 SZ-590MM*235MM*42.5MM TK. 18 NOS/SET (C)PKG SHT III HEMRL/ED/DRG N
Specification : CORRUGATED FIBRE BOARD BOXES(PROVI)OF INTERNAL DIMENSIONS 400 MM X 400 MM X 600 MM,SPCN.NO.OFI/ 100/NIGU/SPCN,ISSUE NO-2 (TWO) DT. 27-11-2010 & AS PER DRG. NO.OFI/2010/NIGU/297 R1.
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CORRUGATED FIBRE BOARD PACKING CARTON TO DRG NO FS 2389 D
Description : CORRUGATED FIBRE BOARD PACKING CARTON TO DRG NO FS 2389 D()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.
E
Estab
2) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 536B
Description : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 536B()
3) FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2375H FOR TAIL UNIT
Description : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2375H FOR TAIL UNIT()
Specification : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.
E
Estab
4) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRAWING NO FS 2376 E FOR ST TUBE
Description : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRAWING NO FS 2376 E FOR ST TUBE()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.
E
Estab
5) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2377E FOR ILLU SHELL BODY
Description : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2377E FOR ILLU SHELL BODY()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.
E
Estab
6) CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K
Description : CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K()
Specification : CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]()
Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]()
Specification : St. Forging Plate Bottom to DRG No. SKM-283*2
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
R
Nonestab
2) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Nonestab
3) ST FORGING BUFFER BODY FOR MAG[01]()
Specification : DRG. NO. SKM-304*1
C
Nonestab
4) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Cylinder Gas[01]()
Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
2) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
3) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
R
Nonestab
4) BUTTON CATCH MAGAZINE FOR JVPC[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-004-00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A[91]()
Specification : MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A
C
Nonestab
2) SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203[91]()
Specification : SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203
R
Nonestab
Category :
Grade : Grade III
Size :
M
4163
CHEMSDEAL INC. PVT LTD FORMERLY KNOWN AND REGISTERED AS GLOBAL MARKETING & PROJECTS
Mittal Chamber 2nd Floor 42 - Jaora Compound Indore Madhya Pradesh
PIN1 : 452001
Phone No. : 94250662882
Specification : SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G
R
Estab
2) SODIUM SULPHATE ANHYDROUS TECH GR A
Description : SODIUM SULPHATE ANHYDROUS TECH GR A()
Specification : SPECIFICATION-OFI/0023/SPN DT 26/08/1994 "GRADE C" MATERIAL SHAL BE IN POWDER FORM FREE FROM DIRT AND OTHER FOREIGN MATTER AND PACKED IN POLYTHENE LINED H.D.P.E.BAGS OF 50 KG EACH.THE STRENGTH OF LIME AS CALCIUM OXIDE BY MASS SHOULD BE BE
Specification : CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION
Description : PAPER KRAFT AMMUNITION()
Specification : PAPER KRAFT AMMUNITION SIZE 48.2 CMX 63.4 CM GRADE 170 +/- 10 GMS. TO SPECIFICATION JSS/8135 - 017 -2002(REAFFURNED 2011) DC.NO.5016 -ME DT. 16.03.2011.
Specification : CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG
Description : 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG()
Specification : JSS 9310- 03: 2010
R
Estab
2) 1419828815 PAPER WHITE FINE
Description : 1419828815 PAPER WHITE FINE()
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
P
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) GLOVES ASBESTOS HAND 400 MM LONG
Description : GLOVES ASBESTOS HAND 400 MM LONG()
Specification : ASBESTOS HAND GLOVES MINIMUM 400 MM LONG, WITH 5 FINGERS WITH COTTON ON FANNEL LINING, MADE FROM CLOSELY WOVEN ASBESTOS CLOTH - (MINIMUM THICK 1.5 THREAD) MADE FROM AMC-41 OF M/S HINDUSTAN FYSAX LTD TO WITHSTAND MIN TEMP 300 DEGREES C
Specification : MOTHER GRAPHITE FOR TEM AS PER DRAWING NO .OFI/2001/GMP/65/7/2./R1
R
Estab
2) CONTROL MOULD FOR PINAKA
Description : CONTROL MOULD FOR PINAKA()
Specification : AS PER HEMRL DRAWING NO. HEMRL/SRP/PIN/CON/04.01 WITH SPECIFICATION SHEET.
R
Estab
3) MOULD FOR NASCHEM CHARGE
Description : MOULD FOR NASCHEM CHARGE()
Specification : AS PER DRG NO OFI/99/GMP/48 R2.MATERIAL- ALUMINIUM ALLOY HE-30 AND AS PER SPECIFICATION NO 37/ PROC / GMP DT 15/01/2008
R
Estab
4) SET OF CASTING MANDRELS
Description : SET OF CASTING MANDRELS()
Specification : SET OF CASTING MANDRELS(FRONT & REAR) FOR PINAKA , AS PER SPECIFICATION NO. 54/PINAKA/GMP/OFI DT. 01/09/2016.
R
Estab
5) GRAPHITE INSERT FOR TEM
Description : GRAPHITE INSERT FOR TEM()
Specification : AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
Specification : MOTHER GRAPHITE FOR TEM AS PER DRAWING NO .OFI/2001/GMP/65/7/2./R1
R
Estab
2) CONTROL MOULD FOR PINAKA
Description : CONTROL MOULD FOR PINAKA()
Specification : AS PER HEMRL DRAWING NO. HEMRL/SRP/PIN/CON/04.01 WITH SPECIFICATION SHEET.
R
Estab
3) MOULD FOR NASCHEM CHARGE
Description : MOULD FOR NASCHEM CHARGE()
Specification : AS PER DRG NO OFI/99/GMP/48 R2.MATERIAL- ALUMINIUM ALLOY HE-30 AND AS PER SPECIFICATION NO 37/ PROC / GMP DT 15/01/2008
R
Estab
4) SET OF CASTING MANDRELS
Description : SET OF CASTING MANDRELS()
Specification : SET OF CASTING MANDRELS(FRONT & REAR) FOR PINAKA , AS PER SPECIFICATION NO. 54/PINAKA/GMP/OFI DT. 01/09/2016.
R
Estab
5) GRAPHITE INSERT FOR TEM
Description : GRAPHITE INSERT FOR TEM()
Specification : AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
R
Estab
Category : ddp
Grade : 1
Size :
S
4167
Sri Vengatachalam Engineering Works Private Limited
14, Kalarampatty Main Road Salem Tamil Nadu
PIN1 : 636015
Phone No. : 09443236303
Specification : AS PER IS: 517:1986 (REAFFIRMED 2002) DOC. NO. HEMRL/SRP/PHR/RZ-61/IV MAY2005 REV-1 COPY NO.2 ANNEXURE IV D. (AR/GR)MAKE:MERCK/RANBAXY/SIGMA ALDRICH/GLAXO SMITHKLINE.
R
Estab
2) ADIPIC ACID
Description : ADIPIC ACID()
Specification : ADIPIC ACID AS PER SPECN.ERDL/TRIM/PROP/RM/11 PROVISIONAL DOC.NO.HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO.3 DT. 07.09.2012.(AR/GR) MAKE:MERCK/RANBAXY/SIGMA ALDRICH/GLAXO SMITHKLINE
Specification : JSS-8305-14-1988 (REVISION NO.II) DC ME DTD. 25-06-98, VISCOCITY 20-30 POISE
R
Estab
Category : ddp
Grade : 1
Size :
S
4178
SRI HARI MAHARALAYAM OILSEEDS ROCESSING CO PVT LTD
M/S SRI HARI MAHARALAYAM OILSEEDS PROCESSING CO PVT LTD W4/B7/294, RATHINA NAGAR PERIYAKULAM ROAD THENI TAMIL NADU
PIN1 : 625531
Phone No. : 9894602332
GSTIN : 33AADCS2327L1ZF
