List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4042

PIN1 :
Phone No. : 		aavpg7720l

Download 		1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) NG Barrier of 125mm FSAPDS practice LF 9911358705 Description : NG Barrier of 125mm FSAPDS practice LF 9911358705() Specification : NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1 2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ADIPIC ACID Description : ADIPIC ACID() Specification : ADIPIC ACID AS PER SPECN.ERDL/TRIM/PROP/RM/11 PROVISIONAL DOC.NO.HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO.3 DT. 07.09.2012.(AR/GR) MAKE:MERCK/RANBAXY/SIGMA ALDRICH/GLAXO SMITHKLINE R Estab
2) METHYL AZIRIDINYL PHOSPHINE OXIDE Description : METHYL AZIRIDINYL PHOSPHINE OXIDE() Specification : ERDL/TRIM/PROP/RM/13 DOC. NO. HEMRL/SRP/PIN/MQAP/6 COPY NO.REV. NO.6 DT. 20/05/2015 R Estab
3) MAT O BOND Description : MAT O BOND() Specification : ERDL/TRIM/PROP/RM/7, HEMRL/SRP/PIN/MQAP/6COPY NO.2 REV. NO.6 DATED 20/05/2015. R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ADIPIC ACID Description : ADIPIC ACID() Specification : ADIPIC ACID AS PER SPECN.ERDL/TRIM/PROP/RM/11 PROVISIONAL DOC.NO.HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO.3 DT. 07.09.2012.(AR/GR) MAKE:MERCK/RANBAXY/SIGMA ALDRICH/GLAXO SMITHKLINE R Estab
2) METHYL AZIRIDINYL PHOSPHINE OXIDE Description : METHYL AZIRIDINYL PHOSPHINE OXIDE() Specification : ERDL/TRIM/PROP/RM/13 DOC. NO. HEMRL/SRP/PIN/MQAP/6 COPY NO.REV. NO.6 DT. 20/05/2015 R Estab
3) MAT O BOND Description : MAT O BOND() Specification : ERDL/TRIM/PROP/RM/7, HEMRL/SRP/PIN/MQAP/6COPY NO.2 REV. NO.6 DATED 20/05/2015. R Estab
Category : ddp
Grade : 1
Size : S
4043 PLIOGRIP RESINS AND CHEMICALS PVT LTD
ANJALI CHS LIMITED,FLAT NO.101B,FRENCHBRIDGE,OPERA HOUSE MUMBAI-400 007 FRENCH BRIDGE MUMBAI Maharashtra
PIN1 : 400007
Phone No. : 49788939
GSTIN : 27AAACP2252Q1Z4 		MUMP16475E

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ARALDITE TWO TUBE PACK 180GRAM EACH LF 1003022200 Description : ARALDITE TWO TUBE PACK 180GRAM EACH LF 1003022200() Specification : ARALDITE IN TWO TUBE PACK (180 GRMS IN EACH PACK) R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) HARDNER EH 408[10]() Specification : HARDNER EH 408(5 KG PACK) E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) RESIN HYLAK HSR 8111[10]() Specification : HSR-8111 (HYLAC POLYEST) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1003259900 Adhesive Synthetic IND/ME/788(D)[10]() Specification : SPECN. NO.IND/ME/788(D) R Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Dunadhesive 758 dendrite PC 65[90]() Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408 E Nonestab
Category :
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 7119150010 DOBECKOT 505C MAKE M S E BECK [71]() Specification : DOBECKOT 505C MAKE:M/S E.BECK P Estab
2) 7119150009 HARDNER 758 FOR EPOXY RESIN DOBECKO [71]() Specification : HARDNER 758"FOR EPOXY RESIN DOBECKO P Estab
Category : p
Grade : Grade III
Size : S
4044 X-RAY ACCESSORIES MANUFACTURING CO.
102, FAIZAN APARTMENT, GHASWALLA ESTATE S.V.ROAD JOGESHWARI WEST MUMBAI MAHARASHTRA
PIN1 : 400102
Phone No. : 9769992123 		ADOPJ1098E

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER Description : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER() Specification : X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE P Estab
Category : p
Grade : 3
Size : S
4045 LAXMI ENGINEERING WORKS
E-515, SECTOR 23 SANJAY NAGAR SECTOR-23, SANJAY NAGAR GHAZIABAD Uttar Pradesh
PIN1 : 201002
Phone No. : 28363320
GSTIN : 09AIYPC8208Q1Z9 		AIYPC8208Q

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) CELL TO DRG NO MCT 3237 FOR D7[74]() Specification : CELL TO DRG.NO. , MCT-3237 FOR D-7 C Nonestab
2) RING LOCKING TO DRG NO IRDE 335 7[74]() Specification : RING, LOCKING TO DRG.NO.:IRDE-335/7 C Nonestab
3) SLEEVE OBJECT GLASS AS PER DRG NO IRDE 335 3[74]() Specification : SLEEVE ,OBJECT GLASS AS PER DRG.NO.:IRDE-335/3 C Nonestab
4) RING SECURING AS PER DRG NO IRDE 335 75[74]() Specification : RING,SECURING AS PER DRG. NO. IRDE-335/75 C Nonestab
5) PIN THREADED SPECIAL SIDE AS PER DRG NO IRDE 335 77[74]() Specification : PIN,THREADED,SPECIAL,SIDE AS PER DRG.NO.: IRDE-335/77 C Nonestab
6) PIN AS PER DRG NO IRDE 342 5[74]() Specification : PIN AS PER DRG.NO. IRDE-342/5 C Nonestab
7) STOP PLATE AS PER DRG NO IRDE 335 80[74]() Specification : STOP, PLATE AS PER DRG.NO.:IRDE-335/80 C Nonestab
8) SLEEVE LARGE AS PER DRG NO IRDE 335 31[74]() Specification : SLEEVE,LARGE AS PER DRG.NO.:IRDE-335/31 C Nonestab
9) SPACER OPTICAL ELEMENT AS PER DRG NO IRDE 1159 8[74]() Specification : SPACER, OPTICAL ELEMENT AS PER DRG.NO.:IRDE-1159/8 C Nonestab
10) NUT PLAIN HEXAGON AS PER DRG NO IRDE 335 52[74]() Specification : NUT,PLAIN,HEXAGON AS PER DRG.NO.:IRDE-335/52 C Nonestab
11) RETAINER OPTICAL ELEMENT AS PER DRG NO IRDE 335 6[74]() Specification : RETAINER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/6 C Nonestab
12) NUT TO DRG NO MCT 2451[74]() Specification : NUT TO DRG.NO.MCT-2451 C Nonestab
13) PLATE BEARING TO DRG NO MCT 1118 2 FOR SIGHT UNIT CASED 102B[74]() Specification : PLATE BEARING TO DRG.NO MCT-1118/2 FOR SIGHT UNIT CASED 102B C Nonestab
14) CELL GRATICULE TO DRG MCT 1143 1 FOR SIGHT UNIT CASED 102B[74]() Specification : CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B C Nonestab
15) SCREW DRG NO MCT 1125 1[74]() Specification : SCREW DRG NO.MCT-1125/1 C Nonestab
16) NUT PLAIN ROUND IRDE 1175 30[74]() Specification : NUT PLAIN ROUND IRDE-1175/30 C Nonestab
17) RING TO DRG NO MCT 3248 FOR CLINOMETER 2A 46[74]() Specification : RING TO DRG.NO.MCT-3248 FOR CLINOMETER 2A 46 C Nonestab
18) SLEEVE TO DRG NO MCT 3249 FOR CLINOMETER 2A 46[74]() Specification : SLEEVE TO DRG.NO.MCT-3249 FOR CLINOMETER 2A 46 C Nonestab
19) COVER OF LEVEL TO DRG NO MCT 3252 FOR CLINOMETER 2A 46[74]() Specification : COVER OF LEVEL TO DRG.NO.MCT-3252 FOR CLINOMETER 2A 46 C Nonestab
20) CONTAINER AS PER DRG NO IRDE 335 68[74]() Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68 C Nonestab
21) BUSHING SLEEVE AS PER DRG NO IRDE 335 76[74]() Specification : BUSHING, SLEEVE, OD 22.9MM AS PER DRG.NO.: IRDE-335/76 C Nonestab
22) STOP APERTURE AS PER DRG NO IRDE 335 48[74]() Specification : STOP,APERTURE AS PER DRG.NO.:IRDE-335/48 C Nonestab
23) CELL RETICLE DRG NO IRDE 2605 16[74]() Specification : CELL RETICLE DRG.NO.:IRDE-2605/16 C Nonestab
24) RING RETAINING TO DRG. NO. MCT-2939/2 FOR HR BINO 8X30R[74]() Specification : AS PER SPECIFICATION C Nonestab
25) STUD DRG.NO.CQA(I)-46/2[74]() Specification : AS PER SPECIFICATION C Nonestab
26) WASHER FLAT AS PER DRG NO IRDE 1159 9[74]() Specification : WASHER, FLAT AS PER DRG.NO.:IRDE-1159/9 C Nonestab
27) CAP PROTECTIVE DUST AND MOISTURE SEAL[74]() Specification : CAP ,PROTECTIVE,DUST & MOISTURE SEAL DRG.NO.MCT-1124/1 C Nonestab
28) RING RETANING FOR HRBINO 8 30R[74]() Specification : RING RETANING TO DRG.NO.MCT-2940/2 FOR HRBINO 8X30R. C Nonestab
29) RING RETAINING TO FOR HR BINO 8 30 R[74]() Specification : RING RETAINING TO DRG.NO.MCT-2945/2 FOR HR BINO 8X30R. C Nonestab
30) RING RETAINING TO DRG NO MCT 2946 2 FOR HR BINO 8X30 R[74]() Specification : RING RETAINING TO DRG.NO. MCT-2946/2 FOR HR BINO 8X30 R C Nonestab
31) BINOCULAR SCREW DRG NO MCT 2936 2 FOR HR BINO 8X30R[74]() Specification : BINOCULAR SCREW DRG.NO. MCT-2936/2 FOR HR BINO 8X30R. C Nonestab
32) RING RETANING TO DRG NO MCT 2921 2 FOR HR BINO 8X30R[74]() Specification : RING RETANING TO DRG.NO.MCT-2921/2 FOR HR BINO 8X30R. C Nonestab
33) SCREW MACHINE CSK HEAD SIZE M4X5 LONG BRASS CONFIRMING TO IS 1365[17]() Specification : SCREW MACHINE C'SK HEAD SIZE-M4X5 LONG BRASS CONFIRMING TO IS-1365 C Nonestab
34) SCREW MACHINE CSK HEAD SIZE M4X18 LONG BRASS CONFIMING TO IS 1365[17]() Specification : SCREW MACHINE CSK HEAD SIZE-M4X18 LONG BRASS CONFIMING TO IS-1365 C Nonestab
35) SCREW MACHINE CSK HEAD SIZE M6X9 LONG STEEL CONFIRMING TO IS 1365[17]() Specification : SCREW MACHINE C'SK HEAD SIZE-M6X9 LONG STEEL CONFIRMING TO IS-1365 C Nonestab
36) SCREW MACHINE CSK HEAD SIZE M6 X 15 LONG STEEL 5S IS 1365[17]() Specification : SCREW MACHINE CSK HEAD SIZE-M6 X 15 LONG STEEL(5S) IS-1365 C Nonestab
37) SCREW MACHINE CHEES HEAD SIZE M6X12 STEEL TO IS 1366[17]() Specification : SCREW MACHINE CHEES HEAD SIZE-M6X12 STEEL TO IS-1366 C Nonestab
38) SCREW GRUB CONICAL END SIZE M4X6 STEEL CONFORMING TO IS 2388[17]() Specification : SCREW GRUB CONICAL END SIZE-M4X6 STEEL CONFORMING TO IS-2388 C Nonestab
39) SCREW SOCKET CAP HEXAGONAL HEAD SIZE M4 X 16MM LONG STEEL IS 2269[17]() Specification : SCREW SOCKET CAP HEXAGONAL HEAD SIZE-M4 X 16MM LONG STEEL IS-2269 P8.8 P -PRECISION GRADE 8.8 =NO MARKING OF HEAD (PLAIN HD.) C Nonestab
40) SCREW HEXAGONAL HEAD SIZE M6X15 LONG STEEL IS 1364[17]() Specification : SCREW HEXAGONAL HEAD SIZE-M6X15 LONG STEEL IS-1364 P-8.8 C Nonestab
41) SCREW METRIC SLOTTED CH HD WITH BLACK BRONZING IS 1366 BRASS[17]() Specification : SCREW METRIC SLOTTED CH. HD.M2.5X8 LONG WITH BLACK BRONZING IS 1366 BRASS C Nonestab
42) RING EXTERNALLY THREADED AS PER DRG NO IRDE 2605 28[74]() Specification : RING,EXTERNALLY THREADED AS PER DRG.NO.IRDE-2605/28. C Nonestab
43) RING SPECIAL AS PER DRG NO IRDE 2605 13[74]() Specification : RING SPECIAL AS PER DRG.NO. IRDE-2605/13 C Nonestab
44) SPACER OPTICAL ELEMENT TO DRG NO IRDE 2605 5[74]() Specification : SPACER, OPTICAL ELEMENT TO DRG.NO. IRDE-2605/5. C Nonestab
45) ADAPTER FLANGED EYE SHIELD AS PER DRG NO IRDE 2605 30[74]() Specification : ADAPTER FLANGED (EYE SHIELD) AS PER DRG.NO. IRDE-2605/30. C Nonestab
46) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2605 43[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2605/43. C Nonestab
47) NUT PLAIN ROUND AS PER DRG NO MCT 3012[74]() Specification : NUT,PLAIN ROUND AS PER DRG.NO. MCT-3012. C Nonestab
48) HALF ROUND HD SCREW M S CD PLATED FOR TNP 65A[17]() Specification : HALF ROUND HD.SCREW M2.5X8,M.S CD PLATED FOR TNP-65A. C Nonestab
49) WASHER B IS 5370 BRASS[17]() Specification : WASHER B 3.2 MM IS:5370 BRASS C Nonestab
50) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 14[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/14. C Nonestab
51) RING RETAINING OPTICAL ELEMENT TO DRG NO IRDE 2603 32[74]() Specification : RING RETAINING, OPTICAL ELEMENT TO DRG.NO.IRDE-2603/32 C Nonestab
52) CSK SCREW STEEL M3X5 MM[17]() Specification : CSK SCREW STEEL M3X5 MM C Nonestab
53) SCREW DRG NO MCT 2654 1[17]() Specification : SCREW DRG.NO-MCT-2654/1 C Nonestab
54) RETAINING TO DRG NO IRDE 2023 38 MCT1493 1 FOR GNVP[74]() Specification : RING ,RETAINING TO DRG.NO.IRDE-2023/38 MCT-1493/1.FOR GNVP WO.42482. C Nonestab
55) RING RETTIANING OPTICAL ELEMENT TO DRG IRDE 2001 7 MCT 1474 FOR BNVP 101A[74]() Specification : RING,RETTIANING,OPTICAL ELEMENT TO DRG. IRDE-2001/7,MCT-1474.FOR BNVP,101A . WO.43025. C Nonestab
56) CAP LID TO DRG NO MCT 3251 FOR CLINOMETER 2A 46[00]() Specification : CAP(LID) TO DRG.NO.MCT-3251 FOR CLINOMETER 2A 46 C Nonestab
57) SCREW SPECIAL DRG NO MCT 1137 1[74]() Specification : SCREW SPECIAL DRG.NO.MCT-1137/1 C Nonestab
58) SCREW BA ROUND HEAD[74]() Specification : SCREW BA ROUND HEAD 8X5/16" BRASS C Nonestab
59) COLLER TO DRG OS 12327[74]() Specification : COLLER TO DRG.NO.OS-12327,MCT-2831 FOR DFC NO-7 ,WO.19225. C Nonestab
60) HEAD DRG OS 13615 MCT 2833[74]() Specification : HEAD TO DRG.OS-13615,MCT-2833, FOR DFC-7 WO.30352. C Nonestab
61) BUSH TO DRG OS 13616 MCT 2834[74]() Specification : BUSH TO DRG.OS-13616,MCT-2834 FOR DFC-7 WO.30032. C Nonestab
62) NUT TO DRG NO MCT 2487[74]() Specification : NUT TO DRG.NO MCT-2487 C Nonestab
63) NUT CLAMPING AS PER DRG NO MCT 3163[74]() Specification : NUT CLAMPING AS PER DRG.NO.MCT-3163 C Nonestab
64) SOCKET AS PER DRG NO MCT 3189[74]() Specification : SOCKET AS PER DRG.NO.MCT-3189 C Nonestab
65) WASHER TO DRG MCT 3114 1 FOR SUC 102B[74]() Specification : WASHER TO DRG. MCT-3114/1 FOR SUC-102B C Nonestab
66) CELL DRG NO MCT 1161 3 FOR SIGHT UNIT CASED 102 B[74]() Specification : CELL DRG. NO. MCT-1161/3 FOR SIGHT UNIT CASED 102B C Nonestab
67) WASHER TO DRG MCT 1126 2 FOR SIGHT UNIT CASED 102B[74]() Specification : WASHER TO DRG. MCT-1126/2 FOR SIGHT UNIT CASED 102B C Nonestab
68) NUT LOCKING SPECIAL DRG NO MCT 3112 FOR SIGHT DIAL 104A[74]() Specification : NUT,LOCKING,SPECIAL,DRG.NO. MCT-3112.FOR SIGHT DIAL 104A. C Nonestab
69) HOLDER DRG IRDE 1175 45 SHT 2 FOR SIGHT DIAL 104A[74]() Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045. C Nonestab
70) RING RETAINING TO DRG NO MCT 3238 1 FOR SIGHT DIAL 104A[74]() Specification : RING RETAINING TO DRG.NO.MCT-3238/1 FOR SIGHT DIAL 104A C Nonestab
71) SUPPORT DIAL SCALE TO DRG NO MCT 3243 FOR SIGHT DIAL 104A[74]() Specification : SUPPORT DIAL SCALE TO DRG.NO.MCT-3243 FOR SIGHT DIAL 104A C Nonestab
72) KNOB TO DRG NO MCT 3245 FOR SIGHT DIAL 104A[74]() Specification : KNOB TO DRG.NO.MCT-3245 FOR SIGHT DIAL 104A C Nonestab
73) RETAINER TO DRG NO MCT 3240 1 FOR SIGHT DIAL 104A[74]() Specification : RETAINER TO DRG.NO.MCT-3240/1 FOR SIGHT DIAL 104A C Nonestab
74) BEARING DRUM TO DRG NO MCT 2901[74]() Specification : BEARING DRUM, TO DRG.NO.-MCT-2901 MCT-2901 C Nonestab
75) SPACER RING AS PER DRG NO MCT 3270 FOR SIGHT DIAL 104A[71]() Specification : SPACER RING AS PER DRG.NO. MCT-3270 FOR SIGHT DIAL 104A C Nonestab
76) SCREW TAPPING THREAD CUTTING TO DRG NO MCT 1144 2 FOR SIGHT UNIT CASED 102B[74]() Specification : SCREW,TAPPING,THREAD, CUTTING TO DRG.NO.MCT-1144/2 FOR SIGHT UNIT CASED 102B. C Nonestab
77) BUSHING BLANK MCT 1113 2[74]() Specification : BUSHING BLANK,MCT-1113/2 C Nonestab
78) TUBE LEVEL INDICATOR AS PER DRG NO MCT 3250 SHEET NO2[74]() Specification : TUBE LEVEL INDICATOR AS PER DRG.NO.:MCT-3250(SHEET.NO.2) C Nonestab
79) BUSH AS PER DRG NO CWC 229 77 1[74]() Specification : BUSH AS PER DRG.NO.CWC/229/77/1. C Nonestab
80) SCREW SOCKET CAP HEXAGONAL HEAD SIZE M4X18 LONG STEEL CONFIRMING TO IS 2269[17]() Specification : SCREW SOCKET CAP HEXAGONAL HEAD SIZE-M4X18 LONG STEEL CONFIRMING TO IS-2269 P-8.8 C Nonestab
81) SCREW GRUB SLOTTED CONICAL END STEEL WITH CADMIUM PLATING IS 2388 MAKE LPS[17]() Specification : SCREW GRUB SLOTTED CONICAL END M2X2.5 LONG STEEL WITH CADMIUM PLATING IS-2388 MAKE-LPS C Nonestab
82) SCREW GRUB SLOTTED HEAD LONG STEEL WITH PHOSPHATE PLATING AS PER IS 2388 CONICAL END[17]() Specification : SCREW GRUB SLOTTED HEAD M2X4.5MM LONG STEEL WITH PHOSPHATE PLATING AS PER IS-2388. CONICAL END. C Nonestab
83) SCREW METRIC CH HEAD STEEL M3X20MM LONG IS 1366[17]() Specification : SCREW METRIC CH.HEAD STEEL M3X20MM LONG IS-1366 C Nonestab
84) RD HD MC SCREW M2X3 BRASS FOR SUC 102B[17]() Specification : RD. HD M/C SCREW M2X3 BRASS FOR S.U.C 102B. C Nonestab
85) PIN CYLINDRICAL STEEL 2 H 8X6MM LONG FOR S DIAL 104A[17]() Specification : PIN CYLINDRICAL STEEL 2 H 8X6MM LONG FOR S/DIAL 104A. C Nonestab
86) SCREW GRUB SLOTTED C TYPE FINISH CAD PLATING IS 2388 STEEL[17]() Specification : SCREW GRUB SLOTTED C TYPE M 2.5X6 MM FINISH: CAD.PLATING, IS:2388, STEEL C Nonestab
87) SCREW GRUB SLOTTED HEAD CONICAL HEAD WITH CADMIUM PLATING STEEL SIZE AS PER IS 2388[17]() Specification : SCREW GRUB SLOTTED HEAD CONICAL HEAD WITH CADMIUM PLATING,STEEL SIZE-M1.6X2 AS PER IS-2388, 6.6 MAKE-LPS C Nonestab
88) SCREW GRUB SLOTTED CONICAL END STEEL SIZE M3X3 MM LONG AS PER IS 2388 1971[17]() Specification : SCREW GRUB SLOTTED CONICAL END STEEL SIZE M3X3 MM LONG AS PER IS:2388-1971 (6.6) C Nonestab
Category : p
Grade : Grade III
Size : S
4046 ANKIT ENGINEERING WORKS
GALA NO. 14, SAMARPAN IND. ESTATE HANUMAN NAGAR, ROAD NO. 28, WAGLE ESTATE THANE MAHARASHTRA
PIN1 : 400604
Phone No. : 9867066206 		BJIPS4873B

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD Description : DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD() Specification : DISC TO PART NO.QX-41AF, ITEM NO:2 MATERIAL SPECN: LEAD TIN FOIL TO JSS:9535-06-2010 (REV.NO-2), DC NO:4085-ME, DTD.08.09.2010 (FOR CAP 78G). NOTE:TOP OF THE TIN FOIL DISC TO BE COATED WITH VARNISH SHELLAC. C Estab
Category : p
Grade : 3
Size : S
4047 SUNRISE FINE CHEMICAL INDUSTRIES
PLOT NO. A-1 MIDC KURKUMBH, TALUKA - DAUND PUNE MAHARASHTRA
PIN1 : 413105
Phone No. : 9422304326
GSTIN : 27AAEFS2312M1Z6 		PNES00364A

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BARIUM CHROMATE Description : BARIUM CHROMATE() Specification : BARIUM CHROMATE TO SPECN. IND/ME/794 (b), DC.3177-ME, Dt.20.01.14(1)APPARENT DENSITY 0.55 TO 0.65 g/ml (2) MEAN DIAMETER OF PARTICLE 1.5 TO 2.0 MICRON. R Estab
2) BARIUM PEROXIDE GR.I Description : BARIUM PEROXIDE GR.I() Specification : BARIUM PEROXIDE GR.I TO JSS-6810-96 -2011-REV-2 ADMT-1 DC NO 5081 ME, DT.06.08.2012. R Estab
Category : p
Grade : 3
Size : S
4048 DVS CHEMICAL & ENGINEERING
B-103, RAJ HEIGHTS CHS LTD, OPP SHIV SENA OFFICE, M.G.ROAD, KANDIVALI (WEST) MUMBAI MAHARASHTRA
PIN1 : 400067
Phone No. : 022-280560096 		AAAFD0316Q

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SULPHUR GR 1 TO JSS:6810-103-1993.() Specification : JSS-6810-103:2012 REV 3 DC:5099-ME R Estab
Category : p
Grade : 3
Size : S
4049 Shells Engineering Private Limited
Plot no 322/2A 40 shed area, GIDC Vapi Gujarat
PIN1 : 396195
Phone No. : 2424898
GSTIN : 24AADCS4417K1ZD 		AADCS4417K

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 7110308052 FABRI MACH OF WHEEL BEAM 2025040 [71]() Specification : FABRI.&MACH.OF WHEEL BEAM 2025040. C Estab
Category : p
Grade : Grade III
Size : S
4050 SVR ENGINEERING WORKS
PLOT NO B9/1,IDA PATANCHERU,NEAR SANTHOSHIMATHA TEMPLE MEDAK TELANGANA
PIN1 : 502319
Phone No. : 09849511252 		AARFS3021L

Download 		1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) HEX HEAD SCREW 12 1 25 30 A 8 8 P TO 7211241230 Description : HEX HEAD SCREW 12 1 25 30 A 8 8 P TO 7211241230() Specification : IS:1364(M12X1.25X30) C Estab
2) HEX HEAD BOLT M12 1 25 36 A 8 8 ZN TO 7211241236 Description : HEX HEAD BOLT M12 1 25 36 A 8 8 ZN TO 7211241236() Specification : IS:1364(M12X1.25X36) C Estab
3) HEX HEAD NUT M8 1 25 TO 7251120008 Description : HEX HEAD NUT M8 1 25 TO 7251120008() Specification : IS:1364(M8X1.25) C Estab
4) LOCKING WASHER TO 7490077036 Description : LOCKING WASHER TO 7490077036() Specification : VB.901.58 C Estab
5) SPLIT PIN 6 3X40 TO 8273010634 Description : SPLIT PIN 6 3X40 TO 8273010634() Specification : IS:549(6.3X40) C Estab
6) BRACKET TO 6101010024 Description : BRACKET TO 6101010024() Specification : 188.10.010-1/PL C Estab
7) PLATE TO 6101210236 Description : PLATE TO 6101210236() Specification : 188.10.242/PL C Estab
8) RIB MIDDLE TO 6106102201 Description : RIB MIDDLE TO 6106102201() Specification : 172.02.727 C Estab
9) UPPER FLAP TO 6106102230 Description : UPPER FLAP TO 6106102230() Specification : 172.02.761 C Estab
10) SUPPORT RH TO 6106102322 Description : SUPPORT RH TO 6106102322() Specification : 175.02.170A/PL C Estab
11) OPERATION INDICATOR TO 6106102426 Description : OPERATION INDICATOR TO 6106102426() Specification : 175.02.523/PL C Estab
12) HINGE DOOR TO 6106102621 Description : HINGE DOOR TO 6106102621() Specification : 172.02.679-1/PL C Estab
13) HINGE DOOR TO 6106102622 Description : HINGE DOOR TO 6106102622() Specification : 172.02.688-1/PL C Estab
14) DRIVEN SHAFT TO 6106202037 Description : DRIVEN SHAFT TO 6106202037() Specification : 434.17.024/PL C Estab
15) ROLLER TO 6106203115 Description : ROLLER TO 6106203115() Specification : 172.18.192/PL C Estab
16) SHAFT TO 6106203176 Description : SHAFT TO 6106203176() Specification : 175.18.060/PL C Estab
17) LEVER TO 6106211136 Description : LEVER TO 6106211136() Specification : 172.28.115-2/PL C Estab
18) BOLT TO 6106214171 Description : BOLT TO 6106214171() Specification : 172.65.117/PL C Estab
19) GEAR SHAFT TO 6106401031 Description : GEAR SHAFT TO 6106401031() Specification : 172.40.019-1/PL C Estab
20) GEAR AXLE L H TO 6106401076 Description : GEAR AXLE L H TO 6106401076() Specification : 172.40.242/PL C Estab
21) BUSHING TO 6106401206 Description : BUSHING TO 6106401206() Specification : 432.40.213/PL C Estab
22) BUSH TO 6106402040 Description : BUSH TO 6106402040() Specification : 175.41.057/PL C Estab
23) BUSH TO 6106402041 Description : BUSH TO 6106402041() Specification : 175.41.058/PL C Estab
24) CLAMP TO 7109002012 Description : CLAMP TO 7109002012() Specification : 520.09.002-12 C Estab
25) BUSH TO 6106402042 Description : BUSH TO 6106402042() Specification : 175.41.059/PL C Estab
26) NUT TO 6106402043 Description : NUT TO 6106402043() Specification : 175.41.060/PL C Estab
27) BUSH TO 6106402057 Description : BUSH TO 6106402057() Specification : 175.41.081/PL C Estab
28) NUT TO 6106402058 Description : NUT TO 6106402058() Specification : 175.41.082/PL C Estab
29) BUSH TO 6106402079 Description : BUSH TO 6106402079() Specification : 172.41.085/PL C Estab
30) THRUST CONE TO 6106406030 Description : THRUST CONE TO 6106406030() Specification : 172.45.010/PL C Estab
31) SPROCKET WHEEL TO 6106414007 Description : SPROCKET WHEEL TO 6106414007() Specification : 175.54.004-3/PL C Estab
32) FORK TO 6106417084 Description : FORK TO 6106417084() Specification : 175.61.040-A/PL C Estab
33) LEVER TO 6106419119 Description : LEVER TO 6106419119() Specification : 172.61.040/PL C Estab
34) BRACKET TO 6106419181 Description : BRACKET TO 6106419181() Specification : 175.63.082/PL C Estab
35) SHACKLE TO 6106420045 Description : SHACKLE TO 6106420045() Specification : 176.64.016-2/PL C Estab
36) COVER TO 6106420109 Description : COVER TO 6106420109() Specification : 175.64.022/PL C Estab
37) SPINDLE TO 6106508024 Description : SPINDLE TO 6106508024() Specification : 432.80.045-4 C Estab
38) 1ST LEFT HAND SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106801664 Description : 1ST LEFT HAND SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106801664() Specification : 172.01.635-6/PL C Estab
39) 2ND LH SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106801665 Description : 2ND LH SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106801665() Specification : 172.01.636-4/PL C Estab
40) 1ST RIGHT HAND SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106801666 Description : 1ST RIGHT HAND SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106801666() Specification : 172.01.728-2/PL C Estab
41) 6TH RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO 6106801667 Description : 6TH RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO 6106801667() Specification : 172.01.729/PL C Estab
42) CLAMP L H TO 6106802078 Description : CLAMP L H TO 6106802078() Specification : 175.03.031 C Estab
43) CLAMP R H TO 6106802079 Description : CLAMP R H TO 6106802079() Specification : 175.03.032 C Estab
44) ACCESS HOLE COVER TO 6106802080 Description : ACCESS HOLE COVER TO 6106802080() Specification : 175.03.035-A/PL C Estab
45) COMPENSATING STRAP TO 6106803235 Description : COMPENSATING STRAP TO 6106803235() Specification : 175.04.115-2/PL C Estab
46) 2ND R H SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106831636 Description : 2ND R H SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106831636() Specification : 172.01.637-4/PL C Estab
47) 3RD L H AND R H SUPPORT OF ROAD WHELLSPECIAL STEEL TO 6106831637 Description : 3RD L H AND R H SUPPORT OF ROAD WHELLSPECIAL STEEL TO 6106831637() Specification : 172.01.638-4/PL C Estab
48) 4TH L H AND R H SUPPORT OF ROAD WHEEL SPECIAL STEEL TO 6106831638 Description : 4TH L H AND R H SUPPORT OF ROAD WHEEL SPECIAL STEEL TO 6106831638() Specification : 172.01.639-4/PL C Estab
49) 5TH L H AND R H SUPPORT OF ROAD WHEEL SPECIAL STEEL TO 6106831639 Description : 5TH L H AND R H SUPPORT OF ROAD WHEEL SPECIAL STEEL TO 6106831639() Specification : 172.01.640-4/PL C Estab
50) 6TH L H SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106831640 Description : 6TH L H SUPPORT OF ROAD WHEEL ARM SPECIAL STEEL TO 6106831640() Specification : 172.01.641-4/PL C Estab
51) SLEEVE SGD LH TO 6106831657 Description : SLEEVE SGD LH TO 6106831657() Specification : V572.0175.4006 C Estab
52) CLAMP TO 7109002005 Description : CLAMP TO 7109002005() Specification : 520.09.002-05 C Estab
53) BOLT TO 6201000138 Description : BOLT TO 6201000138() Specification : M12-6GX60.46.016 C Estab
54) COVER AND SHIELD ASSY FOR WELDING TO 6201000358 Description : COVER AND SHIELD ASSY FOR WELDING TO 6201000358() Specification : HVF/T-90/HULL/282 C Estab
55) PIN TO 6201002056 Description : PIN TO 6201002056() Specification : 188.02.121 C Estab
56) FENDER PLATE REAR TO 6201004136 Description : FENDER PLATE REAR TO 6201004136() Specification : 172.04.576-1 C Estab
57) CLAMP TO 7109002001 Description : CLAMP TO 7109002001() Specification : 520.09.002-01 C Estab
58) SUPPORT ASSY TO 6201004155 Description : SUPPORT ASSY TO 6201004155() Specification : 188.04.019CBCB C Estab
59) CLAMP TO 7109001014 Description : CLAMP TO 7109001014() Specification : 520.09.001-14 C Estab
60) STRAP TO 6201004186 Description : STRAP TO 6201004186() Specification : 188.04.105-01 C Estab
61) RIGHT HAND BRACKET ASSY TO 6201010014 Description : RIGHT HAND BRACKET ASSY TO 6201010014() Specification : 188.10.105CBCB C Estab
62) LEFT HAND BRACKET ASSY TO 6201010015 Description : LEFT HAND BRACKET ASSY TO 6201010015() Specification : 188.10.106CB-1CB C Estab
63) BRACKET TO 6201010038 Description : BRACKET TO 6201010038() Specification : 188.10.282 C Estab
64) SPINDLE TO 6201010046 Description : SPINDLE TO 6201010046() Specification : 447A.10.174 C Estab
65) BOSS TO 6201010126 Description : BOSS TO 6201010126() Specification : 188.10.114 C Estab
66) CLAMP TO 7109001006 Description : CLAMP TO 7109001006() Specification : 520.09.001-06 C Estab
67) STOP TO 6201011037 Description : STOP TO 6201011037() Specification : 188.11.012 C Estab
68) SCREW TO 6201011039 Description : SCREW TO 6201011039() Specification : 188.11.014 C Estab
69) LEFT HAND BUSH TO 6201011063 Description : LEFT HAND BUSH TO 6201011063() Specification : 447A.11.051-2 C Estab
70) WASHER TO 7107003009 Description : WASHER TO 7107003009() Specification : 520.07.003-09 C Estab
71) RIGHT HAND BUSH TO 6201011064 Description : RIGHT HAND BUSH TO 6201011064() Specification : 447A.11.052-2 C Estab
72) WASHER TO 7107003005 Description : WASHER TO 7107003005() Specification : 520.07.003-05 C Estab
73) RIGHT HAND BUSHING ASSY TO 6201011079 Description : RIGHT HAND BUSHING ASSY TO 6201011079() Specification : 184.11.028CBCB C Estab
74) RING TO 6201017020 Description : RING TO 6201017020() Specification : 447A.17.043 C Estab
75) PISTON TO 6201017022 Description : PISTON TO 6201017022() Specification : 447A.17.113 C Estab
76) LEVER TO 6201017023 Description : LEVER TO 6201017023() Specification : 447A.17.114 C Estab
77) STUD TO 7104002002 Description : STUD TO 7104002002() Specification : 520.04.002-02 C Estab
78) BOLT TO 6201021080 Description : BOLT TO 6201021080() Specification : 188.21.046 C Estab
79) DISK TO 6201023028 Description : DISK TO 6201023028() Specification : 172.23.086 C Estab
80) NUT TO 6201023039 Description : NUT TO 6201023039() Specification : 172.23.104 C Estab
81) BOLT TO 6201030035 Description : BOLT TO 6201030035() Specification : 188.30.023-01 C Estab
82) FLANGE TO 6201031226 Description : FLANGE TO 6201031226() Specification : 188.31.146 C Estab
83) CLAMP TO 6201032165 Description : CLAMP TO 6201032165() Specification : 172.32.570 C Estab
84) CLIP BAND TO 6201032171 Description : CLIP BAND TO 6201032171() Specification : 54.03.260-A C Estab
85) PIPE UNION TO 6201033110 Description : PIPE UNION TO 6201033110() Specification : CQA(HV)5.33.006 C Estab
86) FLANGE TO 6201033111 Description : FLANGE TO 6201033111() Specification : CQA(HV)5.33.008 C Estab
87) SLOTTED PIPE TO 6201035019 Description : SLOTTED PIPE TO 6201035019() Specification : MTO.1.35.005 C Estab
88) RING TO 6201040083 Description : RING TO 6201040083() Specification : 172.40.339-1 C Estab
89) SPACER RING TO 6201040084 Description : SPACER RING TO 6201040084() Specification : 172.40.340 C Estab
90) THROW OUT DEVICE SHAFT TO 6201040092 Description : THROW OUT DEVICE SHAFT TO 6201040092() Specification : 172.40.349 C Estab
91) LOCKING STRAP TO 6201040097 Description : LOCKING STRAP TO 6201040097() Specification : 172.40.356 C Estab
92) NUT TO 7102001005 Description : NUT TO 7102001005() Specification : 520.02.001-05 C Estab
93) THROW OUT DEVICE TO 6201040113 Description : THROW OUT DEVICE TO 6201040113() Specification : 172.40.371-1 C Estab
94) BOLT TO 7101009000 Description : BOLT TO 7101009000() Specification : 520.01.009 C Estab
95) STUD TO 6201041010 Description : STUD TO 6201041010() Specification : 188.41.003 C Estab
96) BUSH TO 6201041014 Description : BUSH TO 6201041014() Specification : 188.41.009 C Estab
97) BOLT TO 7101007000 Description : BOLT TO 7101007000() Specification : 520.01.007 C Estab
98) BOLT TO 6201051005 Description : BOLT TO 6201051005() Specification : 172.51.024A C Estab
99) SLEEVE TO 6201052013 Description : SLEEVE TO 6201052013() Specification : 172.52.146-1 C Estab
100) CLAMP ASSY TO 6201061013 Description : CLAMP ASSY TO 6201061013() Specification : 188.61.013CBCB C Estab
Category : p
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) BOLT TO 6201061023 Description : BOLT TO 6201061023() Specification : 188.61.014 C Estab
2) LEVER TO 6201063039 Description : LEVER TO 6201063039() Specification : 188.63.023 C Estab
3) BOLT TO 7101001001 Description : BOLT TO 7101001001() Specification : 520.01.001-01 C Estab
4) BOLT TO 6201064006 Description : BOLT TO 6201064006() Specification : 172.64.077-01 C Estab
5) GASKET TO 6201065017 Description : GASKET TO 6201065017() Specification : 188.65.008 C Estab
6) GASKET TO 6201065018 Description : GASKET TO 6201065018() Specification : 188.65.008-01 C Estab
7) PIN TO 6201065026 Description : PIN TO 6201065026() Specification : 188.65.009-01 C Estab
8) PIN TO 6201065027 Description : PIN TO 6201065027() Specification : 188.65.009-02 C Estab
9) BOLT TO 6201088005 Description : BOLT TO 6201088005() Specification : 175.88.021-A C Estab
10) CLAMP ASSY TO 6201093055 Description : CLAMP ASSY TO 6201093055() Specification : 176.93.034CBCB C Estab
11) SUPPORT ASSY TO 6201093064 Description : SUPPORT ASSY TO 6201093064() Specification : 172.93.190CBCB C Estab
12) SIMMONDS NYLOC NUT M10X1 TO 7098491001 Description : SIMMONDS NYLOC NUT M10X1 TO 7098491001() Specification : M10X1 C Estab
13) PIPE UNION TO 6201204050 Description : PIPE UNION TO 6201204050() Specification : 172.04.756-2 C Estab
14) BOSS TO 6201210266 Description : BOSS TO 6201210266() Specification : 184.10.127 C Estab
15) SIMMONDS NYLOC NUT M8X1 TO 7098490801 Description : SIMMONDS NYLOC NUT M8X1 TO 7098490801() Specification : NUTM8X1 C Estab
16) SCREW ASSEMBLY DRAWING TO 6201218011 Description : SCREW ASSEMBLY DRAWING TO 6201218011() Specification : 188.18.029CBCB C Estab
17) STOP TO 6206000109 Description : STOP TO 6206000109() Specification : 219.09.432 C Estab
18) RING TO 6206004129 Description : RING TO 6206004129() Specification : 172.74.412 C Estab
19) BOLT TO 6206004164 Description : BOLT TO 6206004164() Specification : 172.77.084 C Estab
20) BAND ASSY TO 6206008022 Description : BAND ASSY TO 6206008022() Specification : 175.91.036CBCB C Estab
21) SNAP HEAD RIVET 6X30 TO 7079978002 Description : SNAP HEAD RIVET 6X30 TO 7079978002() Specification : SNAP-HEAD-RIVET C Estab
22) CLAMP ASSY TO 6206008115 Description : CLAMP ASSY TO 6206008115() Specification : 172.91.275CBCB C Estab
23) STUD BOLT ASSY TO 6206008116 Description : STUD BOLT ASSY TO 6206008116() Specification : 172.91.276CBCB C Estab
24) SHAFT TO 6206008249 Description : SHAFT TO 6206008249() Specification : 175.91.084 C Estab
25) NUT TO 6206008251 Description : NUT TO 6206008251() Specification : 175.91.102 C Estab
26) JOINING LINK PR 12 7 1820 1 TO 7065905012 Description : JOINING LINK PR 12 7 1820 1 TO 7065905012() Specification : GOST:13568/PR-12.7 C Estab
27) CLAMP TO 6206008556 Description : CLAMP TO 6206008556() Specification : 155.28.1930 C Estab
28) SUPPORT TO 6206009003 Description : SUPPORT TO 6206009003() Specification : 176.93.010CB C Estab
29) BOSS M10X1X18X30 STEEL 20 TO 7045510071 Description : BOSS M10X1X18X30 STEEL 20 TO 7045510071() Specification : OST:3-1496(M10X1X18X30) C Estab
30) SUPPORT R H TO 6206009007 Description : SUPPORT R H TO 6206009007() Specification : 176.93.018CB C Estab
31) BOSS M24x1 50x40x80 STEEL 20 TO 7045424201 Description : BOSS M24x1 50x40x80 STEEL 20 TO 7045424201() Specification : OST:3-1496/24X1.5X80 C Estab
32) SUPPORT L H TO 6206009024 Description : SUPPORT L H TO 6206009024() Specification : 172.2M.93.018CBCB C Estab
33) SUPPORT TO 6206009038 Description : SUPPORT TO 6206009038() Specification : 172.2M.93.056CB C Estab
34) BOSS M16X1 5X28X60 TO 7045416149 Description : BOSS M16X1 5X28X60 TO 7045416149() Specification : OST:3-1496(M16X28X60 C Estab
35) CLAMP TO 6206009068 Description : CLAMP TO 6206009068() Specification : 175.93.043CB C Estab
36) BOSS M10X18X130 TO 7045210088 Description : BOSS M10X18X130 TO 7045210088() Specification : OST:3-1496/10X18X130 C Estab
37) CUP TO 6206009069 Description : CUP TO 6206009069() Specification : 175.93.044CB C Estab
38) BOSS TO 7045210086 Description : BOSS TO 7045210086() Specification : M10X18X110 C Estab
39) WASHER TO 6206009150 Description : WASHER TO 6206009150() Specification : 172.2M.93.067 C Estab
40) COVER ASSY TO 6206102047 Description : COVER ASSY TO 6206102047() Specification : 172.02.211CBCB C Estab
41) BOSS TO 7045210085 Description : BOSS TO 7045210085() Specification : OST:3-1496(10X18X100 C Estab
42) ROD TO 6206102059 Description : ROD TO 6206102059() Specification : 175.02.122CB-2CB C Estab
43) ROD OF THE POWER PLANT COMPARTMENT ROOF TO 6206102080 Description : ROD OF THE POWER PLANT COMPARTMENT ROOF TO 6206102080() Specification : 175.02.123CB-2 C Estab
44) SUPPORT TO 6206102125 Description : SUPPORT TO 6206102125() Specification : 172.02.011 C Estab
45) SUPPORT TO 6206102126 Description : SUPPORT TO 6206102126() Specification : 172.02.012 C Estab
46) PIN HINGE TO 6206102132 Description : PIN HINGE TO 6206102132() Specification : 172.02.067-1 C Estab
47) RETAINER ROD TO 6206102175 Description : RETAINER ROD TO 6206102175() Specification : 172.02.670 C Estab
48) CAP TO 6206102193 Description : CAP TO 6206102193() Specification : 172.02.717 C Estab
49) BOSS TO 7045210076 Description : BOSS TO 7045210076() Specification : OST:3-1496(10X18X55) C Estab
50) SUPPORT TO 6206102239 Description : SUPPORT TO 6206102239() Specification : 172.02.773-A C Estab
51) ROLLER TO 6206102296 Description : ROLLER TO 6206102296() Specification : 175.02.052-1 C Estab
52) PLUG TO 6206102314 Description : PLUG TO 6206102314() Specification : 175.02.139 C Estab
53) STRIP TO 6206102320 Description : STRIP TO 6206102320() Specification : 175.02.168 C Estab
54) BOLT TO 6206102343 Description : BOLT TO 6206102343() Specification : 175.02.225-1 C Estab
55) BUSHING TO 6206102382 Description : BUSHING TO 6206102382() Specification : 175.02.400 C Estab
56) WASHER TO 6206102391 Description : WASHER TO 6206102391() Specification : 175.02.446 C Estab
57) BODY STOPPER TO 6206102424 Description : BODY STOPPER TO 6206102424() Specification : 175.02.521 C Estab
58) STOPPER TO 6206102425 Description : STOPPER TO 6206102425() Specification : 175.02.522 C Estab
59) BOSS M10X18X50 TO 7045210075 Description : BOSS M10X18X50 TO 7045210075() Specification : OST:3-1496(10X18X50) C Estab
60) NUT TO 6206102467 Description : NUT TO 6206102467() Specification : 166.29.936 C Estab
61) BOLT TO 6206102493 Description : BOLT TO 6206102493() Specification : 155.29.2813-1 C Estab
62) BRACKET TO 6206102597 Description : BRACKET TO 6206102597() Specification : 172.02.830 C Estab
63) ANGLE PIECE TO 6206102655 Description : ANGLE PIECE TO 6206102655() Specification : 172.02.815 C Estab
64) PILLAR TO 6206109030 Description : PILLAR TO 6206109030() Specification : 172.11.085 C Estab
65) SCREW TO 6206109053 Description : SCREW TO 6206109053() Specification : 172.11.106 C Estab
66) STEEL ROUND BOSS TO 7045208053 Description : STEEL ROUND BOSS TO 7045208053() Specification : OST:3-1496(M8X16X60) C Estab
67) STUD TO 6206109062 Description : STUD TO 6206109062() Specification : 172.11.116 C Estab
68) BOLT TO 6206109070 Description : BOLT TO 6206109070() Specification : 172.11.131 C Estab
69) BUSHING L H TO 6206109183 Description : BUSHING L H TO 6206109183() Specification : 172.11.048CBCB C Estab
70) BOSS TO 7045206034 Description : BOSS TO 7045206034() Specification : OST:3-1496(M6X12X65) C Estab
71) BUSHING R H TO 6206109184 Description : BUSHING R H TO 6206109184() Specification : 172.11.049CB C Estab
72) BUSHING L H TO 6206109186 Description : BUSHING L H TO 6206109186() Specification : 172.11.046CB C Estab
73) BUSHING R H TO 6206109187 Description : BUSHING R H TO 6206109187() Specification : 172.11.047CB C Estab
74) OUTER CONCENTRIC FLAT THRUST SPRING RING TO 7043155020 Description : OUTER CONCENTRIC FLAT THRUST SPRING RING TO 7043155020() Specification : GOST:13940/IB55 C Estab
75) LOCK TO 6206110006 Description : LOCK TO 6206110006() Specification : 432.11.013CB-2CB C Estab
76) SHAFT TO 6206110031 Description : SHAFT TO 6206110031() Specification : 432.11.063 C Estab
77) RIGHT HAND HINGE TO 6206110052 Description : RIGHT HAND HINGE TO 6206110052() Specification : 432.11.186 C Estab
78) PLUG TO 6206111019 Description : PLUG TO 6206111019() Specification : 172.12.009 C Estab
79) LOCK SCREW TO 6206111031 Description : LOCK SCREW TO 6206111031() Specification : 434.12.024 C Estab
80) BOLT TO 6206111047 Description : BOLT TO 6206111047() Specification : 432.12.052-1 C Estab
81) BOLT TO 6206111060 Description : BOLT TO 6206111060() Specification : 432.23.159 C Estab
82) WASHER TO 6206111061 Description : WASHER TO 6206111061() Specification : 432.23.163 C Estab
83) WASHER TO 6206111445 Description : WASHER TO 6206111445() Specification : 172.12.024 C Estab
84) SLEEVE TO 6206113090 Description : SLEEVE TO 6206113090() Specification : 434.23.128 C Estab
85) PIN TO 6206113107 Description : PIN TO 6206113107() Specification : 432.23.146 C Estab
86) WASHER TO 7040110020 Description : WASHER TO 7040110020() Specification : 10.32.H6 C Estab
87) NUT TO 6206113252 Description : NUT TO 6206113252() Specification : 176.23.049 C Estab
88) SPRING WASHER TO 7037810035 Description : SPRING WASHER TO 7037810035() Specification : 10.OT.65G.016 C Estab
89) COVER TO 6206113265 Description : COVER TO 6206113265() Specification : 176.23.125 C Estab
90) SHIM TO 6206113271 Description : SHIM TO 6206113271() Specification : 176.23.142-01 C Estab
91) CUSHION TO 6206201065 Description : CUSHION TO 6206201065() Specification : 172.15.059-1 C Estab
92) SLEEVE TO 6206201098 Description : SLEEVE TO 6206201098() Specification : 172.15.161 C Estab
93) SPRING WASHER TO 7037724070 Description : SPRING WASHER TO 7037724070() Specification : 24T.65G.016 C Estab
94) BOLT TO 6206201204 Description : BOLT TO 6206201204() Specification : 165.35.101 C Estab
95) SHIM TO 6206202036 Description : SHIM TO 6206202036() Specification : 434.17.023 C Estab
96) WASHER TO 6206202046 Description : WASHER TO 6206202046() Specification : 432.17.020-1 C Estab
97) HANDLE TO 6206203011 Description : HANDLE TO 6206203011() Specification : 172.18.029CB-1 C Estab
98) SPRING WASHER TO 7037712035 Description : SPRING WASHER TO 7037712035() Specification : 12T.65G.016 C Estab
99) GUARD ASSY TO 6206203344 Description : GUARD ASSY TO 6206203344() Specification : 172.18.081CBCB C Estab
100) SPRING WASHER TO 7037704014 Description : SPRING WASHER TO 7037704014() Specification : 4T.65G.016 C Estab
Category : p
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) CLAMP TO 6206205007 Description : CLAMP TO 6206205007() Specification : 172.20.013CB C Estab
2) PLATE TO 6206205011 Description : PLATE TO 6206205011() Specification : 175.20.002CB C Estab
3) BOLT TO 6206205041 Description : BOLT TO 6206205041() Specification : 175.20.023 C Estab
4) SCREW TO 6206205074 Description : SCREW TO 6206205074() Specification : 432.20.123 C Estab
5) WASHER TO 6206205082 Description : WASHER TO 6206205082() Specification : 432.21.138 C Estab
6) WASHER TO 7037604010 Description : WASHER TO 7037604010() Specification : 4.65G.016 C Estab
7) BOLT TO 6206205084 Description : BOLT TO 6206205084() Specification : 60.01.810 C Estab
8) SHIM TO 6206205087 Description : SHIM TO 6206205087() Specification : 54.31.438 C Estab
9) WASHER TO 7037512016 Description : WASHER TO 7037512016() Specification : GOST:6402(12.65G.016 C Estab
10) BRACKET WIPER TO 6206206033 Description : BRACKET WIPER TO 6206206033() Specification : 172.21.052 C Estab
11) WASHER TO 6206206053 Description : WASHER TO 6206206053() Specification : 172.21.088 C Estab
12) BOLT TO 6206206080 Description : BOLT TO 6206206080() Specification : 432.21.071 C Estab
13) COVER TO 6206206087 Description : COVER TO 6206206087() Specification : 432.21.101-1 C Estab
14) WASHER TO 7037508016 Description : WASHER TO 7037508016() Specification : 8.65G.016 C Estab
15) ADJUSTING SHIM TO 6206206088 Description : ADJUSTING SHIM TO 6206206088() Specification : 432.21.103 C Estab
16) GASKET TO 6206206101 Description : GASKET TO 6206206101() Specification : 432.21.134 C Estab
17) PIN TO 7034112030 Description : PIN TO 7034112030() Specification : GOST:9650-12X30 C Estab
18) BOLT LOCKING TO 6206206102 Description : BOLT LOCKING TO 6206206102() Specification : 432.21.136-1 C Estab
19) SPINDLE TO 7033716060 Description : SPINDLE TO 7033716060() Specification : 6-16F9X60.38XC.2.35. C Estab
20) SET SCREW TO 6206206202 Description : SET SCREW TO 6206206202() Specification : 172.21.112 C Estab
21) GASKET TO 6206207032 Description : GASKET TO 6206207032() Specification : 172.22.010 C Estab
22) HINGE TO 6206207067 Description : HINGE TO 6206207067() Specification : 172.22.044 C Estab
23) BUSH TO 6206207068 Description : BUSH TO 6206207068() Specification : 172.22.045 C Estab
24) BUSH TO 6206207160 Description : BUSH TO 6206207160() Specification : 172.22.081 C Estab
25) LATCH TO 6206208019 Description : LATCH TO 6206208019() Specification : 175.25.015-1 C Estab
26) SPINDLE TO 7033712032 Description : SPINDLE TO 7033712032() Specification : 6-12D11X32.38XC.2.35.5-45.5 C Estab
27) BRACKET TO 6206210026 Description : BRACKET TO 6206210026() Specification : 172.27.038CB C Estab
28) BOLT TO 6206210054 Description : BOLT TO 6206210054() Specification : 172.27.051 C Estab
29) PIN TO 7033706036 Description : PIN TO 7033706036() Specification : 6-6D11X36.38XC.2.35, C Estab
30) BUSHING TO 6206210074 Description : BUSHING TO 6206210074() Specification : 172.27.074-A C Estab
31) BOLT TO 6206210080 Description : BOLT TO 6206210080() Specification : 172.27.086 C Estab
32) SPINDLE TO 7033706028 Description : SPINDLE TO 7033706028() Specification : GOST:9650(6X28) C Estab
33) AXLE TO 6206210148 Description : AXLE TO 6206210148() Specification : 172.27.167 C Estab
34) GASKET TO 6206210199 Description : GASKET TO 6206210199() Specification : 165.17.202 C Estab
35) PIN TO 7030316036 Description : PIN TO 7030316036() Specification : OST:3-2234(16U8X36) C Estab
36) WASHER TO 6206210203 Description : WASHER TO 6206210203() Specification : 150.31.723 C Estab
37) NUT TO 6206210214 Description : NUT TO 6206210214() Specification : VKU.076 C Estab
38) COTTER PIN TO 7030303023 Description : COTTER PIN TO 7030303023() Specification : OST:3-2234(2.3U8X22) C Estab
39) WASHER TO 6206210217 Description : WASHER TO 6206210217() Specification : BKY.068 C Estab
40) ROLLER TO 6206211112 Description : ROLLER TO 6206211112() Specification : 172.28.072-1 C Estab
41) COTTER PIN TO 7030050032 Description : COTTER PIN TO 7030050032() Specification : GOST:397(5X32.016) C Estab
42) BUSHING TO 6206211152 Description : BUSHING TO 6206211152() Specification : 172.28.156-1 C Estab
43) ASSY RIVET 3CP 25 OR 3CP 22 TO 7028730022 Description : ASSY RIVET 3CP 25 OR 3CP 22 TO 7028730022() Specification : OST:17-600(3CP-22) C Estab
44) BOLT TO 6206211174 Description : BOLT TO 6206211174() Specification : 172.28.187 C Estab
45) WASHER TO 6206212072 Description : WASHER TO 6206212072() Specification : 432.29.160 C Estab
46) SHIM TO 6206212073 Description : SHIM TO 6206212073() Specification : 150.31.792 C Estab
47) WING NUT TO 7021306140 Description : WING NUT TO 7021306140() Specification : GOST:3032(M6) C Estab
48) SHIM TO 6206212074 Description : SHIM TO 6206212074() Specification : 150.31.793 C Estab
49) PACKING RING TO 6206213231 Description : PACKING RING TO 6206213231() Specification : 33M51.22.16.2-1.5 C Estab
50) GAUZE TO 6206213260 Description : GAUZE TO 6206213260() Specification : 155.38.112 C Estab
51) PIN TO 7033710060 Description : PIN TO 7033710060() Specification : 6-10D11X60.38XC.2.35 C Estab
52) WASHER TO 6206213578 Description : WASHER TO 6206213578() Specification : IL.623-K C Estab
53) GASKET TO 6206213609 Description : GASKET TO 6206213609() Specification : 219.09.816-01 C Estab
54) GASKET TO 6206213611 Description : GASKET TO 6206213611() Specification : 219.09.816-02 C Estab
55) GASKET TO 6206213612 Description : GASKET TO 6206213612() Specification : 219.09.816-03 C Estab
56) GASKET TO 6206213613 Description : GASKET TO 6206213613() Specification : 219.09.816-04 C Estab
57) GASKET TO 6206213614 Description : GASKET TO 6206213614() Specification : 219.09.816-05 C Estab
58) GASKET TO 6206213615 Description : GASKET TO 6206213615() Specification : 219.09.816-06 C Estab
59) BACK REST SLIP COVER TO 6206214016 Description : BACK REST SLIP COVER TO 6206214016() Specification : 172.65.021CB C Estab
60) SLIP COVER SHEATING TO 6206214063 Description : SLIP COVER SHEATING TO 6206214063() Specification : 172.65.054 C Estab
61) NUT TO 7020710060 Description : NUT TO 7020710060() Specification : M10-6H.04.40.016 C Estab
62) SLIP COVER SIDE FRAME TO 6206214065 Description : SLIP COVER SIDE FRAME TO 6206214065() Specification : 172.65.058 C Estab
63) NAIL P1X16 TO 7019010016 Description : NAIL P1X16 TO 7019010016() Specification : GOST:4028(P1X16) C Estab
64) SEAT CUSHION COATING TO 6206214066 Description : SEAT CUSHION COATING TO 6206214066() Specification : 172.65.059 C Estab
65) GASKET TO 6206301013 Description : GASKET TO 6206301013() Specification : 172.30.017-05 C Estab
66) STUD TO 7018110025 Description : STUD TO 7018110025() Specification : GOST:22038(M10X25) C Estab
67) RING LOCKING TO 6206302129 Description : RING LOCKING TO 6206302129() Specification : 172.31.272 C Estab
68) WOOD SCREW TO 7015906030 Description : WOOD SCREW TO 7015906030() Specification : 1-6X30.016 C Estab
69) COUPLING TO 6206302172 Description : COUPLING TO 6206302172() Specification : 172.31.343 C Estab
70) SCREW TO 7015016035 Description : SCREW TO 7015016035() Specification : BM16-6GX35.46.016 C Estab
71) FILTER TO 6206304064 Description : FILTER TO 6206304064() Specification : 175.32.092CBCB C Estab
72) SCREW TO 7015005012 Description : SCREW TO 7015005012() Specification : BM5-6GX12.46.016 C Estab
73) BRANCH PIPE TO 6206304099 Description : BRANCH PIPE TO 6206304099() Specification : 172.32.175CB C Estab
74) SCREW TO 7015004035 Description : SCREW TO 7015004035() Specification : M4-6GX35.46.016 C Estab
75) BOSS TO 6206304241 Description : BOSS TO 6206304241() Specification : 175.32.158 C Estab
76) CLAMP TO 6206304245 Description : CLAMP TO 6206304245() Specification : 175.32.162-1 C Estab
77) SCREW TO 7014908025 Description : SCREW TO 7014908025() Specification : BM8X1-6GX25.46.016 C Estab
78) ELBOW TO 6206304387 Description : ELBOW TO 6206304387() Specification : 172.32.425 C Estab
79) BOLT TO 6206304479 Description : BOLT TO 6206304479() Specification : 172.33.682-02 C Estab
80) BOLT TO 6206304490 Description : BOLT TO 6206304490() Specification : 172.33.526-03 C Estab
81) SCREW TO 7014808016 Description : SCREW TO 7014808016() Specification : BM8-6GX16.46.016 C Estab
82) BAND TO 6206304537 Description : BAND TO 6206304537() Specification : 54.02.480 C Estab
83) SIDE PIECE TO 6206304792 Description : SIDE PIECE TO 6206304792() Specification : 172-32-343 C Estab
84) SIDE PIECE TO 6206304794 Description : SIDE PIECE TO 6206304794() Specification : 172-32-345 C Estab
85) PLUG TO 6206305095 Description : PLUG TO 6206305095() Specification : 308.041 C Estab
86) SCREW TO 7014803008 Description : SCREW TO 7014803008() Specification : GOST:17475(BM3-6GX8) C Estab
87) FLANGE TO 6206305473 Description : FLANGE TO 6206305473() Specification : 172.33.533 C Estab
88) FLANGE TO 6206305499 Description : FLANGE TO 6206305499() Specification : 172.33.578 C Estab
89) FLANGE TO 6206305544 Description : FLANGE TO 6206305544() Specification : 432.33.449 C Estab
90) COCK LATCH TO 6206305597 Description : COCK LATCH TO 6206305597() Specification : 54.05.063 C Estab
91) PLATE TO 6206305650 Description : PLATE TO 6206305650() Specification : 54.39.029 C Estab
92) SCREW TO 7013804012 Description : SCREW TO 7013804012() Specification : BM4-6GX12.46.016 C Estab
93) COVER TO 6206305664 Description : COVER TO 6206305664() Specification : PTSR1.018 C Estab
94) WASHER TO 6206305665 Description : WASHER TO 6206305665() Specification : CQA(HV)5.33.004 C Estab
95) SCREW TO 6206305673 Description : SCREW TO 6206305673() Specification : 3162A.4.7 C Estab
96) SCREW B1M3x6gx6 46 016 ST20 TO 7013803006 Description : SCREW B1M3x6gx6 46 016 ST20 TO 7013803006() Specification : GOST:17473(B1M3X6 C Estab
97) BOLT TO 6206308120 Description : BOLT TO 6206308120() Specification : 175.36.006-1 C Estab
98) NUT TO 6206308162 Description : NUT TO 6206308162() Specification : 172.45.114-1 C Estab
99) BOLT TO 6206310058 Description : BOLT TO 6206310058() Specification : 155.58.116-A C Estab
100) SCREW TO 7013604008 Description : SCREW TO 7013604008() Specification : BM4.6GX8.46.016 C Estab
Category : p
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) CLAMPING DEVICE TO 6206401054 Description : CLAMPING DEVICE TO 6206401054() Specification : 172.40.150 C Estab
2) SCREW TO 7012604008 Description : SCREW TO 7012604008() Specification : BM4-6GX8.46.016 C Estab
3) BOLT TO 6206401090 Description : BOLT TO 6206401090() Specification : 172.40.258 C Estab
4) CIRCLIP TO 6206401107 Description : CIRCLIP TO 6206401107() Specification : 175.40.007 C Estab
5) BEARING RING TO 6206401144 Description : BEARING RING TO 6206401144() Specification : 175.40.050 C Estab
6) RING TO 6206401155 Description : RING TO 6206401155() Specification : 175.40.136 C Estab
7) RING TO 6206401162 Description : RING TO 6206401162() Specification : 175.40.136-07 C Estab
8) THROW OUT DEVICE TO 6206401193 Description : THROW OUT DEVICE TO 6206401193() Specification : 432.40.108-2 C Estab
9) BUSHING TO 6206401206 Description : BUSHING TO 6206401206() Specification : 432.40.213 C Estab
10) RING TO 6206401210 Description : RING TO 6206401210() Specification : 432.40.221-1 C Estab
11) WASHER LOCK TO 6206401220 Description : WASHER LOCK TO 6206401220() Specification : 54.40.158 C Estab
12) ADJUSTING RING TO 6206402018 Description : ADJUSTING RING TO 6206402018() Specification : 175.41.038 C Estab
13) ADJUSTING RING TO 6206402019 Description : ADJUSTING RING TO 6206402019() Specification : 175.41.038-01 C Estab
14) ADJUSTING RING TO 6206402020 Description : ADJUSTING RING TO 6206402020() Specification : 175.41.038-02 C Estab
15) ADJUSTING RING TO 6206402021 Description : ADJUSTING RING TO 6206402021() Specification : 175.41.038-03 C Estab
16) ADJUSTING RING TO 6206402022 Description : ADJUSTING RING TO 6206402022() Specification : 175.41.038-04 C Estab
17) ADJUSTING RING TO 6206402023 Description : ADJUSTING RING TO 6206402023() Specification : 175.41.038-05 C Estab
18) ADJUSTING RING TO 6206402024 Description : ADJUSTING RING TO 6206402024() Specification : 175.41.038-06 C Estab
19) ADJUSTING RING TO 6206402025 Description : ADJUSTING RING TO 6206402025() Specification : 175.41.038-07 C Estab
20) ADJUSTING RING TO 6206402028 Description : ADJUSTING RING TO 6206402028() Specification : 175.41.038-10 C Estab
21) BUSH TO 6206402057 Description : BUSH TO 6206402057() Specification : 175.41.081 C Estab
22) SEAL TO 6206402069 Description : SEAL TO 6206402069() Specification : 175.41.097 C Estab
23) SCREW TO 7011708016 Description : SCREW TO 7011708016() Specification : BM8X1.6GX16.33H.38XC C Estab
24) BUSH TO 6206402086 Description : BUSH TO 6206402086() Specification : 172.45.068 C Estab
25) BOLT TO 7008816040 Description : BOLT TO 7008816040() Specification : GOST:7808/3M16X40.88 C Estab
26) BUSH TO 6206402087 Description : BUSH TO 6206402087() Specification : 172.45.117 C Estab
27) BOLT TO 7008810025 Description : BOLT TO 7008810025() Specification : 3M10-6GX25.88.38XC.0 C Estab
28) RING TO 6206403037 Description : RING TO 6206403037() Specification : 175.42.010-03 C Estab
29) RING TO 6206403038 Description : RING TO 6206403038() Specification : 175.42.010-04 C Estab
30) SPINDLE TO 6206403040 Description : SPINDLE TO 6206403040() Specification : 432.42.013-1 C Estab
31) BOLT 3M8 6GX35 88 38XC 016 TO 7008808035 Description : BOLT 3M8 6GX35 88 38XC 016 TO 7008808035() Specification : GOST:7808(3M8X35.88) C Estab
32) WASHER TO 6206403041 Description : WASHER TO 6206403041() Specification : 432.42.021 C Estab
33) BOLT TO 7008716040 Description : BOLT TO 7008716040() Specification : GOST:7808(M16X40.88) C Estab
34) FILLING AND DRAIN PLUG TO 6206403043 Description : FILLING AND DRAIN PLUG TO 6206403043() Specification : 54.08.106-3 C Estab
35) BOLT TO 6206404021 Description : BOLT TO 6206404021() Specification : 175.43.005 C Estab
36) BOLT TO 7008316060 Description : BOLT TO 7008316060() Specification : GOST:7808(M16X1.5.60 C Estab
37) RING TO 6206404022 Description : RING TO 6206404022() Specification : 175.43.009 C Estab
38) SLIDE BLOCK TO 6206406032 Description : SLIDE BLOCK TO 6206406032() Specification : 172.45.014 C Estab
39) BOLT TO 7008312025 Description : BOLT TO 7008312025() Specification : GOST:7808(M12X1.25.) C Estab
40) BOLT TO 6206406035 Description : BOLT TO 6206406035() Specification : 172.45.016 C Estab
41) BOLT TO 6206406097 Description : BOLT TO 6206406097() Specification : 172.45.147 C Estab
42) BOLT TO 6206406130 Description : BOLT TO 6206406130() Specification : 172.45.287-1 C Estab
43) BOLT TO 6206406158 Description : BOLT TO 6206406158() Specification : 172.46.035 C Estab
44) BODY TO 6206406179 Description : BODY TO 6206406179() Specification : 175.45.016-1 C Estab
45) NUT TO 6206406214 Description : NUT TO 6206406214() Specification : 175.45.060 C Estab
46) BOLT TO 6206406235 Description : BOLT TO 6206406235() Specification : 175.45.124 C Estab
47) BOLT TO 6206406258 Description : BOLT TO 6206406258() Specification : 54.36.320 C Estab
48) BOLT TO 6206409015 Description : BOLT TO 6206409015() Specification : 172.46.089 C Estab
49) BOLT TO 7008216030 Description : BOLT TO 7008216030() Specification : M16-6GX30.88.38XC.01 C Estab
50) NUT TO 6206410035 Description : NUT TO 6206410035() Specification : 175.50.011 C Estab
51) COVER TO 6206411065 Description : COVER TO 6206411065() Specification : 175.51.048 C Estab
52) BOLT TO 6206411071 Description : BOLT TO 6206411071() Specification : 175.51.056A C Estab
53) LOCK WASHER TO 6206411094 Description : LOCK WASHER TO 6206411094() Specification : 172.51.013-1 C Estab
54) BOLT TO 7008212030 Description : BOLT TO 7008212030() Specification : GOST:7808(M12X30.88) C Estab
55) BOLT TO 6206412025 Description : BOLT TO 6206412025() Specification : 172.2M.52.007 C Estab
56) BOLT TO 6206412069 Description : BOLT TO 6206412069() Specification : 175.52.061 C Estab
57) PLUG TO 6206413008 Description : PLUG TO 6206413008() Specification : 172.53.020 C Estab
58) BOLT TO 7008210020 Description : BOLT TO 7008210020() Specification : GOST:7808/M10X20.88 C Estab
59) LABYRINTH PACKING RING TO 6206413023 Description : LABYRINTH PACKING RING TO 6206413023() Specification : 175.53.018-1 C Estab
60) NUT TO 6206414010 Description : NUT TO 6206414010() Specification : 175.54.008-1 C Estab
61) WASHER LOCKING TO 6206414011 Description : WASHER LOCKING TO 6206414011() Specification : 175.54.009-2 C Estab
62) BOLT TO 7008108055 Description : BOLT TO 7008108055() Specification : GOST:7808(3M8X1X55) C Estab
63) BOLT TO 6206416026 Description : BOLT TO 6206416026() Specification : 175.56.016 C Estab
64) SHACKLE ASSY TO 6206417023 Description : SHACKLE ASSY TO 6206417023() Specification : 175.61.020CBCB C Estab
65) COUPLING TO 6206417077 Description : COUPLING TO 6206417077() Specification : 175.63.073 C Estab
66) ADJUSTING WASHER TO 6206418098 Description : ADJUSTING WASHER TO 6206418098() Specification : 172.62.145 C Estab
67) LOCK TO 6206418140 Description : LOCK TO 6206418140() Specification : 432.62.129 C Estab
68) ROD ASSY TO 6206419010 Description : ROD ASSY TO 6206419010() Specification : 172.63.061CB C Estab
69) SHACKLE ASSY TO 6206419049 Description : SHACKLE ASSY TO 6206419049() Specification : 175.63.046CB C Estab
70) BOLT TO 7007008040 Description : BOLT TO 7007008040() Specification : 3M8-6GX40.88.38XC.01 C Estab
71) NUT TO 6206419066 Description : NUT TO 6206419066() Specification : 172.63.016 C Estab
72) ADJUSTING BOLT TO 6206419068 Description : ADJUSTING BOLT TO 6206419068() Specification : 172.63.020 C Estab
73) LEVER TO 6206419086 Description : LEVER TO 6206419086() Specification : 172.63.094 C Estab
74) BOLT TO 7005506008 Description : BOLT TO 7005506008() Specification : M6-6GX8.66.016 C Estab
75) NUT TO 6206419143 Description : NUT TO 6206419143() Specification : 175.63.031 C Estab
76) SHAFT TO 6206419155 Description : SHAFT TO 6206419155() Specification : 175.63.044 C Estab
77) BOLT TO 6206419165 Description : BOLT TO 6206419165() Specification : 175.63.055 C Estab
78) FORK TO 6206419176 Description : FORK TO 6206419176() Specification : 175.63.074 C Estab
79) BOLT M12x1 25 6g 30 88 016ST38XC TO 7004712030 Description : BOLT M12x1 25 6g 30 88 016ST38XC TO 7004712030() Specification : GOST:7798/M12X30 C Estab
80) SOCKET TO 6206419200 Description : SOCKET TO 6206419200() Specification : 432.63.091 C Estab
81) SHACKLE TO 6206419203 Description : SHACKLE TO 6206419203() Specification : 432.63.135 C Estab
82) WASHER TO 6206419229 Description : WASHER TO 6206419229() Specification : 54.83.400 C Estab
83) AXLE TO 6206420032 Description : AXLE TO 6206420032() Specification : 176.64.003 C Estab
84) SPINDLE TO 6206420043 Description : SPINDLE TO 6206420043() Specification : 176.64.014 C Estab
85) BOLT TO 6206420049 Description : BOLT TO 6206420049() Specification : 176.64.025 C Estab
86) FORK TO 6206420063 Description : FORK TO 6206420063() Specification : 172.64.028 C Estab
87) TURN BUCKLE TO 6206420064 Description : TURN BUCKLE TO 6206420064() Specification : 172.64.029 C Estab
88) COUPLING TO 6206420073 Description : COUPLING TO 6206420073() Specification : 172.64.041 C Estab
89) LEVER TO 6206420075 Description : LEVER TO 6206420075() Specification : 172.64.043 C Estab
90) WASHER TO 6206420080 Description : WASHER TO 6206420080() Specification : 172.64.048 C Estab
91) NUT TO 6206420131 Description : NUT TO 6206420131() Specification : 175.87.134 C Estab
92) BUSH TO 6206420139 Description : BUSH TO 6206420139() Specification : 432.64.077-1 C Estab
93) NUT TO 6206420142 Description : NUT TO 6206420142() Specification : 432.64.081 C Estab
94) FORK TO 6206420248 Description : FORK TO 6206420248() Specification : 172.64.078 C Estab
95) PLUG TO 6206421196 Description : PLUG TO 6206421196() Specification : 172.66.237 C Estab
96) HOUSING TO 6206501255 Description : HOUSING TO 6206501255() Specification : 172.70.360 C Estab
97) PIPE UNION TO 6206501494 Description : PIPE UNION TO 6206501494() Specification : 175.04.152 C Estab
98) NUT TO 6206501652 Description : NUT TO 6206501652() Specification : ZB.300.008 C Estab
99) PLUG TO 6206501777 Description : PLUG TO 6206501777() Specification : BB8-632-004 C Estab
100) PLATE TO 6206501934 Description : PLATE TO 6206501934() Specification : CG10.36.03 C Estab
Category : p
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) SHAFT TO 6206508008 Description : SHAFT TO 6206508008() Specification : 172.80.003 C Estab
2) FORK TO 6206508023 Description : FORK TO 6206508023() Specification : 434.80.052 C Estab
3) LEVER TO 6206508025 Description : LEVER TO 6206508025() Specification : 432.80.049-2 C Estab
4) SHAFT TO 6206509025 Description : SHAFT TO 6206509025() Specification : 432.81.023 C Estab
5) WASHER TO 6206509068 Description : WASHER TO 6206509068() Specification : 60.07.035 C Estab
6) GASKET TO 6206510039 Description : GASKET TO 6206510039() Specification : 172.82.132 C Estab
7) BOLT TO 6206603034 Description : BOLT TO 6206603034() Specification : 172.86.076 C Estab
8) BLOWER TO 6206604019 Description : BLOWER TO 6206604019() Specification : 434.87.003CB C Estab
9) BLOWER MANUAL CONTROL TO 6206604265 Description : BLOWER MANUAL CONTROL TO 6206604265() Specification : 172.87.079CB-1CB C Estab
10) WASHER TO 6206604326 Description : WASHER TO 6206604326() Specification : X3-9650 C Estab
11) PROTECTIVE WASHER TO 6206604889 Description : PROTECTIVE WASHER TO 6206604889() Specification : 522.117 C Estab
12) SPACER TO 6206605003 Description : SPACER TO 6206605003() Specification : 175.88.003CB C Estab
13) FINGER TO 6206605013 Description : FINGER TO 6206605013() Specification : 175.88.012 C Estab
14) NUT TO 6206605023 Description : NUT TO 6206605023() Specification : 175.88.020 C Estab
15) BOLT TO 6206605024 Description : BOLT TO 6206605024() Specification : 175-88-021-A C Estab
16) SUPPORT ASSY TO 6206608016 Description : SUPPORT ASSY TO 6206608016() Specification : 176.93.016CBCB C Estab
17) SUPPORT TO 6206608065 Description : SUPPORT TO 6206608065() Specification : 175.93.051CB C Estab
18) LATCH TO 6206608276 Description : LATCH TO 6206608276() Specification : 175.93.129-A C Estab
19) BRACKET TO 6206609056 Description : BRACKET TO 6206609056() Specification : 172.94.015 C Estab
20) RETAINER TO 6206609092 Description : RETAINER TO 6206609092() Specification : 172.94.060 C Estab
21) STOP TO 6206609098 Description : STOP TO 6206609098() Specification : 172.94.067 C Estab
22) BOLT TO 6206609101 Description : BOLT TO 6206609101() Specification : 172.94.072 C Estab
23) BUSH TO 6206609113 Description : BUSH TO 6206609113() Specification : 172.94.086 C Estab
24) BRACKET TO 6206609138 Description : BRACKET TO 6206609138() Specification : 155.32.029-A C Estab
25) LOCK NUT TO 6206609154 Description : LOCK NUT TO 6206609154() Specification : 155.32.076 C Estab
26) HANDLE TO 6206609164 Description : HANDLE TO 6206609164() Specification : 155.32.110-1A C Estab
27) PACKING RING TO 6206611117 Description : PACKING RING TO 6206611117() Specification : 33M51-24-18.2-2 C Estab
28) PARTITION PLATE LH ASSY TO 6206801076 Description : PARTITION PLATE LH ASSY TO 6206801076() Specification : 175.01.112CB-1CB C Estab
29) WEDGE TO 6206801179 Description : WEDGE TO 6206801179() Specification : 172.01.563-03 C Estab
30) WEDGE TO 6206801180 Description : WEDGE TO 6206801180() Specification : 172.01.563-04 C Estab
31) BUSH TO 6206801222 Description : BUSH TO 6206801222() Specification : 172.01.609 C Estab
32) STRAP TO 6206801237 Description : STRAP TO 6206801237() Specification : 172.01.687 C Estab
33) SHELL LH TO 6206801302 Description : SHELL LH TO 6206801302() Specification : 175.01.050-1 C Estab
34) WASHER TO 6206801415 Description : WASHER TO 6206801415() Specification : 175.01.314 C Estab
35) BUSHING TO 6206801531 Description : BUSHING TO 6206801531() Specification : 155.29.2839-1 C Estab
36) FLANGE TO 6206801614 Description : FLANGE TO 6206801614() Specification : 172.01.744 C Estab
37) 1ST RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO 6206801666 Description : 1ST RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO 6206801666() Specification : 172.01.728-2 C Estab
38) BOSS 35 TO 6206801796 Description : BOSS 35 TO 6206801796() Specification : V572.0175.3001 C Estab
39) BOSS 50 TO 6206801797 Description : BOSS 50 TO 6206801797() Specification : V572.0175.3002 C Estab
40) BOSS 41 TO 6206801801 Description : BOSS 41 TO 6206801801() Specification : V572.0175.3004 C Estab
41) ANGLE TO 6206801806 Description : ANGLE TO 6206801806() Specification : V572.0175.2001 C Estab
42) STIFFNER UPPER SKIRT 2 TO 6206801871 Description : STIFFNER UPPER SKIRT 2 TO 6206801871() Specification : V572.0175.2015 C Estab
43) WRENCH TO 6206802024 Description : WRENCH TO 6206802024() Specification : 434.03.020CB-2CB C Estab
44) HANDLE TO 6206802075 Description : HANDLE TO 6206802075() Specification : 175.03.014 C Estab
45) BOLT TO 6206802139 Description : BOLT TO 6206802139() Specification : 54.12.063 C Estab
46) SCREW TO 6206802143 Description : SCREW TO 6206802143() Specification : 60.03.008-1 C Estab
47) CLEAT ASSEMBLY TO 6206802183 Description : CLEAT ASSEMBLY TO 6206802183() Specification : 172.03.036CB-1CB C Estab
48) FLANGE TO 6206802194 Description : FLANGE TO 6206802194() Specification : 172.03.098 C Estab
49) BUSH TO 6206802204 Description : BUSH TO 6206802204() Specification : 172.03.101 C Estab
50) PRESSURE STRAP TO 6206803081 Description : PRESSURE STRAP TO 6206803081() Specification : 172.04.242 C Estab
51) NUT TO 6206803082 Description : NUT TO 6206803082() Specification : 172.04.243-1 C Estab
52) HINGE TO 6206803100 Description : HINGE TO 6206803100() Specification : 172.04.417 C Estab
53) HINGE FLAP TO 6206803104 Description : HINGE FLAP TO 6206803104() Specification : 172.04.423 C Estab
54) PLUG TO 6206804103 Description : PLUG TO 6206804103() Specification : 172.04.154-1 C Estab
55) BRACKET TO 6206804115 Description : BRACKET TO 6206804115() Specification : 172.04.265-3 C Estab
56) BOSS TO 6206804136 Description : BOSS TO 6206804136() Specification : 172.04.371 C Estab
57) PLUG TO 6206804184 Description : PLUG TO 6206804184() Specification : 172.02.469 C Estab
58) STOP TO 6206804236 Description : STOP TO 6206804236() Specification : 175.04.284-1 C Estab
59) STRIP TO 6206804398 Description : STRIP TO 6206804398() Specification : 155.29.2391 C Estab
60) STOP TO 6206804589 Description : STOP TO 6206804589() Specification : 172.04.826 C Estab
61) BOSS TO 6206806206 Description : BOSS TO 6206806206() Specification : CQA(HV)5.10.001 C Estab
62) BOSS DIA 36X95 TO 6206806237 Description : BOSS DIA 36X95 TO 6206806237() Specification : CQA(HV)5.10.003 C Estab
63) JACKET ASSY DRG TO 6206809022 Description : JACKET ASSY DRG TO 6206809022() Specification : 2A26CB06CB C Estab
64) BUSHING TO 6206809044 Description : BUSHING TO 6206809044() Specification : 172.20.060 C Estab
65) BOLT TO 6206831239 Description : BOLT TO 6206831239() Specification : 172.01.677-1 C Estab
66) BRANCH PIPE TO 6206831323 Description : BRANCH PIPE TO 6206831323() Specification : 175.01.072-2A C Estab
67) 3RD LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831637 Description : 3RD LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831637() Specification : 172.01.638-4 C Estab
68) 4TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831638 Description : 4TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831638() Specification : 172.01.639-4 C Estab
69) 5TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831639 Description : 5TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831639() Specification : 172.01.640-4 C Estab
70) 6TH LH SUPPORT OF ROAD WHEEL ARM TO 6206831640 Description : 6TH LH SUPPORT OF ROAD WHEEL ARM TO 6206831640() Specification : 172.01.641-4 C Estab
71) BUSHING TO 6206851112 Description : BUSHING TO 6206851112() Specification : 172.25.102-1 C Estab
72) WASHER TO 6206861037 Description : WASHER TO 6206861037() Specification : 172.52.120 C Estab
73) PLUNGER TO 6206861060 Description : PLUNGER TO 6206861060() Specification : 172.52.144 C Estab
74) VALVE CUP TO 6206861061 Description : VALVE CUP TO 6206861061() Specification : 172.52.145 C Estab
75) SLEEVE TO 6206861062 Description : SLEEVE TO 6206861062() Specification : 172.52.146 C Estab
76) WASHER TAB TO 6206861080 Description : WASHER TAB TO 6206861080() Specification : 54.12.059A C Estab
77) BOLT TO 6206886016 Description : BOLT TO 6206886016() Specification : 172.12.006 C Estab
78) BODY STEEL 32X06L GOST 977 88 TO 6206886083 Description : BODY STEEL 32X06L GOST 977 88 TO 6206886083() Specification : 172.12.025 C Estab
79) DETEND FRAME TO 6206890185 Description : DETEND FRAME TO 6206890185() Specification : 172.28.220-1 C Estab
80) RING TO 6206901845 Description : RING TO 6206901845() Specification : 54.05.027-2 C Estab
81) WASHER TO 6206902013 Description : WASHER TO 6206902013() Specification : CG.10.07.13 C Estab
82) WASHER TO 6206902774 Description : WASHER TO 6206902774() Specification : G10.00.13 C Estab
83) ROUND NUT TO 6209801395 Description : ROUND NUT TO 6209801395() Specification : PV572.0765.3020 C Estab
84) RESERVOIR BRACKET TO 6209801397 Description : RESERVOIR BRACKET TO 6209801397() Specification : 34707100000 00 C Estab
85) LOCKING PLATE TO 6209802033 Description : LOCKING PLATE TO 6209802033() Specification : PV572.0718.2380 C Estab
86) BOLT TO 6209806020 Description : BOLT TO 6209806020() Specification : PV572.0756.3002 C Estab
87) BOLT TO 7000006035 Description : BOLT TO 7000006035() Specification : M6-6GX35.46.016 C Estab
88) BOLT TO 7000010050 Description : BOLT TO 7000010050() Specification : M10-6GX50.46.016 C Estab
89) BOLT TO 7000108040 Description : BOLT TO 7000108040() Specification : M8X1-6GX40.46.016 C Estab
90) BOLT TO 7000708035 Description : BOLT TO 7000708035() Specification : 3M8X1-6GX35.46.016 C Estab
91) BOLT TO 7000906035 Description : BOLT TO 7000906035() Specification : M6-6GX35.88.38XC.016 C Estab
92) BOLT TO 7002108035 Description : BOLT TO 7002108035() Specification : M8X1-6GX35.46.016 C Estab
93) BOLT TO 7002616050 Description : BOLT TO 7002616050() Specification : GOST:7796(M16X1.5-6GX50.46.016 C Estab
94) BOLT TO 7003416050 Description : BOLT TO 7003416050() Specification : 3M16X1.5-6GX50.88.38 C Estab
95) BOLT TO 7003706016 Description : BOLT TO 7003706016() Specification : M6X16.46.016 C Estab
96) BOLT TO 7004612038 Description : BOLT TO 7004612038() Specification : M12X1.25-6GX35.88.38 C Estab
97) NUT TO 7021408190 Description : NUT TO 7021408190() Specification : M8X1-6H.45LI.016 C Estab
98) COTTER PIN TO 7030040040 Description : COTTER PIN TO 7030040040() Specification : GOST:397(4X40.016) C Estab
99) PIN TO 7030306018 Description : PIN TO 7030306018() Specification : OST:3-2234(6U8X18) C Estab
100) PIN TO 7033710032 Description : PIN TO 7033710032() Specification : 6-10D11X32.38XC.2.35 C Estab
101) PIN TO 7033712080 Description : PIN TO 7033712080() Specification : 6-12D11X80.38XC.2.35 C Estab
102) SPINDLE TO 7033716036 Description : SPINDLE TO 7033716036() Specification : 6-16D11X36.38XC.2.35 C Estab
103) WASHER TO 7037510016 Description : WASHER TO 7037510016() Specification : GOST:6402(10.65G.016 C Estab
104) SPRING WASHER TO 7037812040 Description : SPRING WASHER TO 7037812040() Specification : 12.OT.65G.016 C Estab
105) WASHER TO 7038606016 Description : WASHER TO 7038606016() Specification : GOST:6958(C6.01.016) C Estab
106) WASHER TO 7039912005 Description : WASHER TO 7039912005() Specification : 12X0.5.01.016 C Estab
107) BAND FOR CLIP ASSY 56 62 L 480 TO 7053056621 Description : BAND FOR CLIP ASSY 56 62 L 480 TO 7053056621() Specification : OST:3.408(56-62) C Estab
108) CLAMP TO 7109001001 Description : CLAMP TO 7109001001() Specification : 520.09.001-01 C Estab
109) CLAMP TO 7109001002 Description : CLAMP TO 7109001002() Specification : 520.09.001-02 C Estab
110) CLAMP TO 7109001005 Description : CLAMP TO 7109001005() Specification : 520.09.001-05 C Estab
111) CLAMP TO 7109001008 Description : CLAMP TO 7109001008() Specification : 520.09.001-08 C Estab
112) CLAMP TO 7109001012 Description : CLAMP TO 7109001012() Specification : 520.09.001-12 C Estab
113) CLAMP TO 7109001013 Description : CLAMP TO 7109001013() Specification : 520.09.001-13 C Estab
114) CLAMP TO 7109001015 Description : CLAMP TO 7109001015() Specification : 520.09.001-15 C Estab
115) CLAMP TO 7109001016 Description : CLAMP TO 7109001016() Specification : 520.09.001-16 C Estab
116) CLAMP TO 7109001017 Description : CLAMP TO 7109001017() Specification : 520.09.001-17 C Estab
117) CLAMP TO 7109001018 Description : CLAMP TO 7109001018() Specification : 520.09.001-18 C Estab
118) CLAMP TO 7109001020 Description : CLAMP TO 7109001020() Specification : 520.09.001-20 C Estab
119) CLAMP TO 7109002007 Description : CLAMP TO 7109002007() Specification : 520.09.002-07 C Estab
120) BOSS TO 7111001000 Description : BOSS TO 7111001000() Specification : 520.11.001 C Estab
121) AXLE WITH FILLET TO 7112001003 Description : AXLE WITH FILLET TO 7112001003() Specification : 520.12.001-03 C Estab
122) BAND TO 7125003013 Description : BAND TO 7125003013() Specification : 520.25.003-13 C Estab
123) RING TO 3801041011 Description : RING TO 3801041011() Specification : 188.41.004/C C Estab
124) BRACKET RH TO 3801063041 Description : BRACKET RH TO 3801063041() Specification : 175.63.036-A/C C Estab
125) ROLLER TO 3806203106 Description : ROLLER TO 3806203106() Specification : 172.18.180-2/C C Estab
126) STOP TO 3806211073 Description : STOP TO 3806211073() Specification : 172.28.022-2/C C Estab
127) BRACKET TO 3806801307 Description : BRACKET TO 3806801307() Specification : 175.01.058-1/C C Estab
Category : p
Grade : 2
Size : S
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) SHAFT TO 6206508008 Description : SHAFT TO 6206508008() Specification : 172.80.003 C Estab
2) FORK TO 6206508023 Description : FORK TO 6206508023() Specification : 434.80.052 C Estab
3) LEVER TO 6206508025 Description : LEVER TO 6206508025() Specification : 432.80.049-2 C Estab
4) SHAFT TO 6206509025 Description : SHAFT TO 6206509025() Specification : 432.81.023 C Estab
5) WASHER TO 6206509068 Description : WASHER TO 6206509068() Specification : 60.07.035 C Estab
6) GASKET TO 6206510039 Description : GASKET TO 6206510039() Specification : 172.82.132 C Estab
7) BOLT TO 6206603034 Description : BOLT TO 6206603034() Specification : 172.86.076 C Estab
8) BLOWER TO 6206604019 Description : BLOWER TO 6206604019() Specification : 434.87.003CB C Estab
9) BLOWER MANUAL CONTROL TO 6206604265 Description : BLOWER MANUAL CONTROL TO 6206604265() Specification : 172.87.079CB-1CB C Estab
10) WASHER TO 6206604326 Description : WASHER TO 6206604326() Specification : X3-9650 C Estab
11) PROTECTIVE WASHER TO 6206604889 Description : PROTECTIVE WASHER TO 6206604889() Specification : 522.117 C Estab
12) SPACER TO 6206605003 Description : SPACER TO 6206605003() Specification : 175.88.003CB C Estab
13) FINGER TO 6206605013 Description : FINGER TO 6206605013() Specification : 175.88.012 C Estab
14) NUT TO 6206605023 Description : NUT TO 6206605023() Specification : 175.88.020 C Estab
15) BOLT TO 6206605024 Description : BOLT TO 6206605024() Specification : 175-88-021-A C Estab
16) SUPPORT ASSY TO 6206608016 Description : SUPPORT ASSY TO 6206608016() Specification : 176.93.016CBCB C Estab
17) SUPPORT TO 6206608065 Description : SUPPORT TO 6206608065() Specification : 175.93.051CB C Estab
18) LATCH TO 6206608276 Description : LATCH TO 6206608276() Specification : 175.93.129-A C Estab
19) BRACKET TO 6206609056 Description : BRACKET TO 6206609056() Specification : 172.94.015 C Estab
20) RETAINER TO 6206609092 Description : RETAINER TO 6206609092() Specification : 172.94.060 C Estab
21) STOP TO 6206609098 Description : STOP TO 6206609098() Specification : 172.94.067 C Estab
22) BOLT TO 6206609101 Description : BOLT TO 6206609101() Specification : 172.94.072 C Estab
23) BUSH TO 6206609113 Description : BUSH TO 6206609113() Specification : 172.94.086 C Estab
24) BRACKET TO 6206609138 Description : BRACKET TO 6206609138() Specification : 155.32.029-A C Estab
25) LOCK NUT TO 6206609154 Description : LOCK NUT TO 6206609154() Specification : 155.32.076 C Estab
26) HANDLE TO 6206609164 Description : HANDLE TO 6206609164() Specification : 155.32.110-1A C Estab
27) PACKING RING TO 6206611117 Description : PACKING RING TO 6206611117() Specification : 33M51-24-18.2-2 C Estab
28) PARTITION PLATE LH ASSY TO 6206801076 Description : PARTITION PLATE LH ASSY TO 6206801076() Specification : 175.01.112CB-1CB C Estab
29) WEDGE TO 6206801179 Description : WEDGE TO 6206801179() Specification : 172.01.563-03 C Estab
30) WEDGE TO 6206801180 Description : WEDGE TO 6206801180() Specification : 172.01.563-04 C Estab
31) BUSH TO 6206801222 Description : BUSH TO 6206801222() Specification : 172.01.609 C Estab
32) STRAP TO 6206801237 Description : STRAP TO 6206801237() Specification : 172.01.687 C Estab
33) SHELL LH TO 6206801302 Description : SHELL LH TO 6206801302() Specification : 175.01.050-1 C Estab
34) WASHER TO 6206801415 Description : WASHER TO 6206801415() Specification : 175.01.314 C Estab
35) BUSHING TO 6206801531 Description : BUSHING TO 6206801531() Specification : 155.29.2839-1 C Estab
36) FLANGE TO 6206801614 Description : FLANGE TO 6206801614() Specification : 172.01.744 C Estab
37) 1ST RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO 6206801666 Description : 1ST RIGHT HAND SUPPORT OF ROAD WHEEL ARM TO 6206801666() Specification : 172.01.728-2 C Estab
38) BOSS 35 TO 6206801796 Description : BOSS 35 TO 6206801796() Specification : V572.0175.3001 C Estab
39) BOSS 50 TO 6206801797 Description : BOSS 50 TO 6206801797() Specification : V572.0175.3002 C Estab
40) BOSS 41 TO 6206801801 Description : BOSS 41 TO 6206801801() Specification : V572.0175.3004 C Estab
41) ANGLE TO 6206801806 Description : ANGLE TO 6206801806() Specification : V572.0175.2001 C Estab
42) STIFFNER UPPER SKIRT 2 TO 6206801871 Description : STIFFNER UPPER SKIRT 2 TO 6206801871() Specification : V572.0175.2015 C Estab
43) WRENCH TO 6206802024 Description : WRENCH TO 6206802024() Specification : 434.03.020CB-2CB C Estab
44) HANDLE TO 6206802075 Description : HANDLE TO 6206802075() Specification : 175.03.014 C Estab
45) BOLT TO 6206802139 Description : BOLT TO 6206802139() Specification : 54.12.063 C Estab
46) SCREW TO 6206802143 Description : SCREW TO 6206802143() Specification : 60.03.008-1 C Estab
47) CLEAT ASSEMBLY TO 6206802183 Description : CLEAT ASSEMBLY TO 6206802183() Specification : 172.03.036CB-1CB C Estab
48) FLANGE TO 6206802194 Description : FLANGE TO 6206802194() Specification : 172.03.098 C Estab
49) BUSH TO 6206802204 Description : BUSH TO 6206802204() Specification : 172.03.101 C Estab
50) PRESSURE STRAP TO 6206803081 Description : PRESSURE STRAP TO 6206803081() Specification : 172.04.242 C Estab
51) NUT TO 6206803082 Description : NUT TO 6206803082() Specification : 172.04.243-1 C Estab
52) HINGE TO 6206803100 Description : HINGE TO 6206803100() Specification : 172.04.417 C Estab
53) HINGE FLAP TO 6206803104 Description : HINGE FLAP TO 6206803104() Specification : 172.04.423 C Estab
54) PLUG TO 6206804103 Description : PLUG TO 6206804103() Specification : 172.04.154-1 C Estab
55) BRACKET TO 6206804115 Description : BRACKET TO 6206804115() Specification : 172.04.265-3 C Estab
56) BOSS TO 6206804136 Description : BOSS TO 6206804136() Specification : 172.04.371 C Estab
57) PLUG TO 6206804184 Description : PLUG TO 6206804184() Specification : 172.02.469 C Estab
58) STOP TO 6206804236 Description : STOP TO 6206804236() Specification : 175.04.284-1 C Estab
59) STRIP TO 6206804398 Description : STRIP TO 6206804398() Specification : 155.29.2391 C Estab
60) STOP TO 6206804589 Description : STOP TO 6206804589() Specification : 172.04.826 C Estab
61) BOSS TO 6206806206 Description : BOSS TO 6206806206() Specification : CQA(HV)5.10.001 C Estab
62) BOSS DIA 36X95 TO 6206806237 Description : BOSS DIA 36X95 TO 6206806237() Specification : CQA(HV)5.10.003 C Estab
63) JACKET ASSY DRG TO 6206809022 Description : JACKET ASSY DRG TO 6206809022() Specification : 2A26CB06CB C Estab
64) BUSHING TO 6206809044 Description : BUSHING TO 6206809044() Specification : 172.20.060 C Estab
65) BOLT TO 6206831239 Description : BOLT TO 6206831239() Specification : 172.01.677-1 C Estab
66) BRANCH PIPE TO 6206831323 Description : BRANCH PIPE TO 6206831323() Specification : 175.01.072-2A C Estab
67) 3RD LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831637 Description : 3RD LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831637() Specification : 172.01.638-4 C Estab
68) 4TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831638 Description : 4TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831638() Specification : 172.01.639-4 C Estab
69) 5TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831639 Description : 5TH LH AND RH SUPPORT OF ROAD WHEEL ARM TO 6206831639() Specification : 172.01.640-4 C Estab
70) 6TH LH SUPPORT OF ROAD WHEEL ARM TO 6206831640 Description : 6TH LH SUPPORT OF ROAD WHEEL ARM TO 6206831640() Specification : 172.01.641-4 C Estab
71) BUSHING TO 6206851112 Description : BUSHING TO 6206851112() Specification : 172.25.102-1 C Estab
72) WASHER TO 6206861037 Description : WASHER TO 6206861037() Specification : 172.52.120 C Estab
73) PLUNGER TO 6206861060 Description : PLUNGER TO 6206861060() Specification : 172.52.144 C Estab
74) VALVE CUP TO 6206861061 Description : VALVE CUP TO 6206861061() Specification : 172.52.145 C Estab
75) SLEEVE TO 6206861062 Description : SLEEVE TO 6206861062() Specification : 172.52.146 C Estab
76) WASHER TAB TO 6206861080 Description : WASHER TAB TO 6206861080() Specification : 54.12.059A C Estab
77) BOLT TO 6206886016 Description : BOLT TO 6206886016() Specification : 172.12.006 C Estab
78) BODY STEEL 32X06L GOST 977 88 TO 6206886083 Description : BODY STEEL 32X06L GOST 977 88 TO 6206886083() Specification : 172.12.025 C Estab
79) DETEND FRAME TO 6206890185 Description : DETEND FRAME TO 6206890185() Specification : 172.28.220-1 C Estab
80) RING TO 6206901845 Description : RING TO 6206901845() Specification : 54.05.027-2 C Estab
81) WASHER TO 6206902013 Description : WASHER TO 6206902013() Specification : CG.10.07.13 C Estab
82) WASHER TO 6206902774 Description : WASHER TO 6206902774() Specification : G10.00.13 C Estab
83) ROUND NUT TO 6209801395 Description : ROUND NUT TO 6209801395() Specification : PV572.0765.3020 C Estab
84) RESERVOIR BRACKET TO 6209801397 Description : RESERVOIR BRACKET TO 6209801397() Specification : 34707100000 00 C Estab
85) LOCKING PLATE TO 6209802033 Description : LOCKING PLATE TO 6209802033() Specification : PV572.0718.2380 C Estab
86) BOLT TO 6209806020 Description : BOLT TO 6209806020() Specification : PV572.0756.3002 C Estab
87) BOLT TO 7000006035 Description : BOLT TO 7000006035() Specification : M6-6GX35.46.016 C Estab
88) BOLT TO 7000010050 Description : BOLT TO 7000010050() Specification : M10-6GX50.46.016 C Estab
89) BOLT TO 7000108040 Description : BOLT TO 7000108040() Specification : M8X1-6GX40.46.016 C Estab
90) BOLT TO 7000708035 Description : BOLT TO 7000708035() Specification : 3M8X1-6GX35.46.016 C Estab
91) BOLT TO 7000906035 Description : BOLT TO 7000906035() Specification : M6-6GX35.88.38XC.016 C Estab
92) BOLT TO 7002108035 Description : BOLT TO 7002108035() Specification : M8X1-6GX35.46.016 C Estab
93) BOLT TO 7002616050 Description : BOLT TO 7002616050() Specification : GOST:7796(M16X1.5-6GX50.46.016 C Estab
94) BOLT TO 7003416050 Description : BOLT TO 7003416050() Specification : 3M16X1.5-6GX50.88.38 C Estab
95) BOLT TO 7003706016 Description : BOLT TO 7003706016() Specification : M6X16.46.016 C Estab
96) BOLT TO 7004612038 Description : BOLT TO 7004612038() Specification : M12X1.25-6GX35.88.38 C Estab
97) NUT TO 7021408190 Description : NUT TO 7021408190() Specification : M8X1-6H.45LI.016 C Estab
98) COTTER PIN TO 7030040040 Description : COTTER PIN TO 7030040040() Specification : GOST:397(4X40.016) C Estab
99) PIN TO 7030306018 Description : PIN TO 7030306018() Specification : OST:3-2234(6U8X18) C Estab
100) PIN TO 7033710032 Description : PIN TO 7033710032() Specification : 6-10D11X32.38XC.2.35 C Estab
101) PIN TO 7033712080 Description : PIN TO 7033712080() Specification : 6-12D11X80.38XC.2.35 C Estab
102) SPINDLE TO 7033716036 Description : SPINDLE TO 7033716036() Specification : 6-16D11X36.38XC.2.35 C Estab
103) WASHER TO 7037510016 Description : WASHER TO 7037510016() Specification : GOST:6402(10.65G.016 C Estab
104) SPRING WASHER TO 7037812040 Description : SPRING WASHER TO 7037812040() Specification : 12.OT.65G.016 C Estab
105) WASHER TO 7038606016 Description : WASHER TO 7038606016() Specification : GOST:6958(C6.01.016) C Estab
106) WASHER TO 7039912005 Description : WASHER TO 7039912005() Specification : 12X0.5.01.016 C Estab
107) BAND FOR CLIP ASSY 56 62 L 480 TO 7053056621 Description : BAND FOR CLIP ASSY 56 62 L 480 TO 7053056621() Specification : OST:3.408(56-62) C Estab
108) CLAMP TO 7109001001 Description : CLAMP TO 7109001001() Specification : 520.09.001-01 C Estab
109) CLAMP TO 7109001002 Description : CLAMP TO 7109001002() Specification : 520.09.001-02 C Estab
110) CLAMP TO 7109001005 Description : CLAMP TO 7109001005() Specification : 520.09.001-05 C Estab
111) CLAMP TO 7109001008 Description : CLAMP TO 7109001008() Specification : 520.09.001-08 C Estab
112) CLAMP TO 7109001012 Description : CLAMP TO 7109001012() Specification : 520.09.001-12 C Estab
113) CLAMP TO 7109001013 Description : CLAMP TO 7109001013() Specification : 520.09.001-13 C Estab
114) CLAMP TO 7109001015 Description : CLAMP TO 7109001015() Specification : 520.09.001-15 C Estab
115) CLAMP TO 7109001016 Description : CLAMP TO 7109001016() Specification : 520.09.001-16 C Estab
116) CLAMP TO 7109001017 Description : CLAMP TO 7109001017() Specification : 520.09.001-17 C Estab
117) CLAMP TO 7109001018 Description : CLAMP TO 7109001018() Specification : 520.09.001-18 C Estab
118) CLAMP TO 7109001020 Description : CLAMP TO 7109001020() Specification : 520.09.001-20 C Estab
119) CLAMP TO 7109002007 Description : CLAMP TO 7109002007() Specification : 520.09.002-07 C Estab
120) BOSS TO 7111001000 Description : BOSS TO 7111001000() Specification : 520.11.001 C Estab
121) AXLE WITH FILLET TO 7112001003 Description : AXLE WITH FILLET TO 7112001003() Specification : 520.12.001-03 C Estab
122) BAND TO 7125003013 Description : BAND TO 7125003013() Specification : 520.25.003-13 C Estab
123) RING TO 3801041011 Description : RING TO 3801041011() Specification : 188.41.004/C C Estab
124) BRACKET RH TO 3801063041 Description : BRACKET RH TO 3801063041() Specification : 175.63.036-A/C C Estab
125) ROLLER TO 3806203106 Description : ROLLER TO 3806203106() Specification : 172.18.180-2/C C Estab
126) STOP TO 3806211073 Description : STOP TO 3806211073() Specification : 172.28.022-2/C C Estab
127) BRACKET TO 3806801307 Description : BRACKET TO 3806801307() Specification : 175.01.058-1/C C Estab
Category : p
Grade : 2
Size : S
4051 DINEX MACHINES PRIVATE LIMITED
59, GANDHI ROAD, GANDHI ROAD DEHRADUN Uttarakhand
PIN1 : 248001
Phone No. : 2788832
GSTIN : 05AAACL8493P1ZT 		AAACL8439P

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) PLATE INDEXING FIXTURE TO DRG NO MCT 2477[74]() Specification : PLATE INDEXING FIXTURE TO DRG.NO. MCT-2477 C Nonestab
2) MACHINING OF LEVER TO DRG NO MCT 2463[74]() Specification : MACHINING OF LEVER TO. DRG. NO. MCT-2463. CASTING WILL BE SUPPLIED BY ORD. FY.D.DUN. C Nonestab
3) RAIL ASSY CONSISTS OF REAR AND FRONT BRACKET TO DRG NO MCT 2313 2314 AND 2315[74]() Specification : RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG.NO.MCT-2313, 2314 & 2315 C Nonestab
4) CASE TO DRG NO MCT 2427[74]() Specification : CASE TO DRG NO. MCT-2427 C Nonestab
5) CASE TO DRG NO MCT 2483 3[74]() Specification : CASE TO DRG,NO. MCT-2483/3 C Nonestab
6) CLINOMETER 2A 46 BODY AS PER DRG NO MCT 3146 1[00]() Specification : CLINOMETER 2A 46 BODY AS PER DRG.NO.: MCT-3146/1 C Nonestab
7) BLOCK TO DRG NO MCT 2439 1[74]() Specification : BLOCK TO DRG.NO. MCT-2439/1 C Nonestab
8) SUPPORT TO DRG NO MCT 3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV[74]() Specification : SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV C Nonestab
9) LEVER DRG NO CII 125[74]() Specification : LEVER DRG.NO.CII-125 C Nonestab
10) TRIPOD FIRE CONTROL INSTRUMENT NO 17A MK 2 M1 TO DRG NO MCT 2705 COMPLETE FOR COLLIMETER INFINITY[74]() Specification : TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG.NO.MCT-2705 COMPLETE.FOR COLLIMETER INFINITY. C Nonestab
11) MACHINING OF BRACKET TO DRG NO MCT 2435 TO 2438[74]() Specification : MACHINING OF BRACKET TO DRG.NO. MCT-2435 TO 2438 CASTING WILL BE SUPPLIED BY ORD.FY.D.DUN. C Nonestab
12) PLATE TO DRG N0 MCT 2473[74]() Specification : PLATE TO DRG.N0.MCT-2473 C Nonestab
13) CELL TO DRG NO MCT 3237 FOR D7[74]() Specification : CELL TO DRG.NO. , MCT-3237 FOR D-7 C Nonestab
14) HEAD MCT 2445[74]() Specification : HEAD MCT-2445 C Nonestab
15) MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN.[00]() Specification : MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN. C Nonestab
16) CAP TO DRG NO OS 34609 MCT 2835 FOR DFC 7[74]() Specification : CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7. C Nonestab
17) PLATE REAR SMALL AS PER DRG NO IRDE 335 22[74]() Specification : PLATE, REAR,SMALL AS PER DRG. NO.:IRDE-335/22 C Nonestab
18) RING LOCKING TO DRG NO IRDE 335 7[74]() Specification : RING, LOCKING TO DRG.NO.:IRDE-335/7 C Nonestab
19) SLEEVE OBJECT GLASS AS PER DRG NO IRDE 335 3[74]() Specification : SLEEVE ,OBJECT GLASS AS PER DRG.NO.:IRDE-335/3 C Nonestab
20) RING SECURING AS PER DRG NO IRDE 335 75[74]() Specification : RING,SECURING AS PER DRG. NO. IRDE-335/75 C Nonestab
21) PIN THREADED SPECIAL SIDE AS PER DRG NO IRDE 335 77[74]() Specification : PIN,THREADED,SPECIAL,SIDE AS PER DRG.NO.: IRDE-335/77 C Nonestab
22) STOP PLATE AS PER DRG NO IRDE 335 80[74]() Specification : STOP, PLATE AS PER DRG.NO.:IRDE-335/80 C Nonestab
23) LOCKING PLATE NUT AND BOLT AS PER DRG NO IRDE 335 20[74]() Specification : LOCKING PLATE,NUT & BOLT AS PER DRG.NO.:IRDE-335/20 C Nonestab
24) SLEEVE LARGE AS PER DRG NO IRDE 335 31[74]() Specification : SLEEVE,LARGE AS PER DRG.NO.:IRDE-335/31 C Nonestab
25) COVER PLATE AS PER DRG NO IRDE 335 8[74]() Specification : COVER, PLATE AS PER DRG.NO.:IRDE-335/8 C Nonestab
26) SPACER OPTICAL ELEMENT AS PER DRG NO IRDE 1159 8[74]() Specification : SPACER, OPTICAL ELEMENT AS PER DRG.NO.:IRDE-1159/8 C Nonestab
27) NUT CAPTIVE AS PER DRG NO IRDE 335 42[74]() Specification : NUT,CAPTIVE AS PER DRG.NO.:IRDE-335/42 C Nonestab
28) HOLDER OPTICAL ELEMENT AS PER DRG NO IRDE 335 14[74]() Specification : HOLDER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/14 C Nonestab
29) RETAINER OPTICAL ELEMENT AS PER DRG NO IRDE 335 6[74]() Specification : RETAINER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/6 C Nonestab
30) CASE DRG NO OS 34611[74]() Specification : CASE DRG.NO.:OS-34611 C Nonestab
31) CAP TO DRG NO MCT 2433 FOR D7[74]() Specification : CAP TO DRG.NO, MCT-2433 FOR D-7 C Nonestab
32) BEARING DRG NO OS 13617[74]() Specification : BEARING DRG.NO.OS-13617 C Nonestab
33) BATTERY COUNTER DRG NO OS 13589[74]() Specification : BATTERY COUNTER DRG.NO.OS-13589 C Nonestab
34) SHADE OPT INST DRG NO 1035 61[74]() Specification : SHADE OPT. INST. DRG.NO.1035/61 C Nonestab
35) NUT TO DRG NO MCT 2451[74]() Specification : NUT TO DRG.NO.MCT-2451 C Nonestab
36) REAR SIGHT DRG NO IRDE 1035 58[74]() Specification : REAR SIGHT DRG.NO-IRDE-1035/58 C Nonestab
37) THUMB PIECE TO DRG NO MCT 3246 1 SHEET 2 OF 3 FOR SIGHT DIAL 104A[74]() Specification : THUMB PIECE TO DRG.NO.MCT-3246/1 (SHEET-2 OF 3) FOR SIGHT DIAL 104A C Nonestab
38) PLATE MCT 2488 FOR D7[74]() Specification : PLATE MCT-2488 FOR D-7 C Nonestab
39) LEVEL INDICATOR TO DRG NO MCT 3250 FOR CLINOMETER 2A 46[74]() Specification : LEVEL INDICATOR TO DRG.NO.MCT-3250 FOR CLINOMETER 2A 46 C Nonestab
40) LEVER CONTROL HAND TO DRG NO MCT 3244 FOR SIGHT DIAL104A[74]() Specification : LEVER CONTROL HAND TO DRG.NO.MCT-3244 FOR SIGHT DIAL104A C Nonestab
41) NUT PLAIN ROUND IRDE 1175 30[74]() Specification : NUT PLAIN ROUND IRDE-1175/30 C Nonestab
42) RING TO DRG NO MCT 3248 FOR CLINOMETER 2A 46[74]() Specification : RING TO DRG.NO.MCT-3248 FOR CLINOMETER 2A 46 C Nonestab
43) BLOCK LOCKING AS PER DRG NO MCT 3271 1 FOR SIGHT DIAL 104A[74]() Specification : BLOCK LOCKING AS PER DRG.NO. MCT-3271/1 FOR SIGHT DIAL 104A C Nonestab
44) COVER OF LEVEL TO DRG NO MCT 3252 FOR CLINOMETER 2A 46[74]() Specification : COVER OF LEVEL TO DRG.NO.MCT-3252 FOR CLINOMETER 2A 46 C Nonestab
45) BUSH FOR DIRECTOR FIRE CONTROL NO 7 DRG NO MCT 2446[74]() Specification : BUSH FOR DIRECTOR FIRE CONTROL NO.7. DRG.NO.MCT-2446 C Nonestab
46) BRACKET DRG NO CQA I 796 1[74]() Specification : BRACKET DRG.NO.CQA(I)-796/1 C Nonestab
47) BOLT LATCH TO DRG NO MCT 3103 FOR MT TELESCOPE 102A[74]() Specification : BOLT,LATCH TO DRG.NO. MCT-3103.FOR MT.TELESCOPE 102A C Nonestab
48) ELEVATION CURVE 557 TO DRG NO CQA I 792 7[74]() Specification : ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7 C Nonestab
49) BLOCK TO DRG NO MCT 3091 FOR MT TELESCOPE 102A[74]() Specification : BLOCK TO DRG.NO-MCT-3091 FOR MT.TELESCOPE 102A C Nonestab
50) BUSHING SLEEVE ECCENTRIC DRG MCT 2904 FOR MT TELESCOPE 102A[74]() Specification : BUSHING SLEEVE ECCENTRIC DRG. MCT-2904.FOR MT.TELESCOPE 102A. C Nonestab
51) CONTAINER AS PER DRG NO IRDE 335 68[74]() Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68 C Nonestab
52) BUSHING SLEEVE AS PER DRG NO IRDE 335 76[74]() Specification : BUSHING, SLEEVE, OD 22.9MM AS PER DRG.NO.: IRDE-335/76 C Nonestab
53) STOP APERTURE AS PER DRG NO IRDE 335 48[74]() Specification : STOP,APERTURE AS PER DRG.NO.:IRDE-335/48 C Nonestab
54) MACH OF BODY TO DRG MCT 2470 1[00]() Specification : MACHINING OF BODY TO DRG.NO.MCT-2470/1 CASTING WILL BE SUPPLIED BY OFD.DUN C Nonestab
55) ASSY OF EYE PIECE LEFT AS PER DRG NO MCT 3286[74]() Specification : ASSY. OF EYE PIECE LEFT AS PER DRG.NO. MCT-3286 C Nonestab
56) CELL OUTER DRG NO IRDE 2048 129[74]() Specification : CELL OUTER DRG NO.IRDE-2048/129 C Nonestab
57) LEVER DRG NO IRDE 2048 139[74]() Specification : LEVER DRG NO.IRDE-2048/139 C Nonestab
58) CELL OPTICAL INSTRUMENTS ERECTOR AS PER DRG NO IRDE 2605 9[74]() Specification : CELL OPTICAL INSTRUMENTS (ERECTOR) AS PER DRG.NO. IRDE-2605/9. C Nonestab
59) YOKE TO DRG NO MCT 1464 3[74]() Specification : YOKE TO DRG NO MCT-1464/3 C Nonestab
60) FRAME TO DRG NO MCT 1465 3[74]() Specification : FRAME TO DRG NO. MCT-1465/3 C Nonestab
61) ASSEMBLY FRAME DRG NO MCT 1337 1[74]() Specification : ASSEMBLY FRAME DRG.NO.MCT-1337/1 C Nonestab
62) BASE TO DRG NO MCT 2877 1 FOR MT TELESCOPE 102A[74]() Specification : "BASE TO DRG.NO.,MCT-2877/1 FOR MT.TELESCOPE 102A C Nonestab
63) CAP BEARING HALF TO DRG NO IRDE 421 14 MCT 2903 FOR MT TELESCOPE 102A[74]() Specification : CAP,BEARING HALF,TO DRG.NO.IRDE-421/14 MCT-2903.FOR MT.TELESCOPE 102A W.O.34442. C Nonestab
64) CLICK RING TO DRG NO CQA I 793 34 FOR TELE 84MM C G MK III[74]() Specification : CLICK RING TO DRG.NO. CQA(I)-793/34 FOR TELE. 84MM C/G MK-III C Nonestab
65) CONNECTOR ROD END TO DRG MCT 3098 FOR MT TELESCOPE 102A[74]() Specification : CONNECTOR,ROD END TO DRG.-MCT-3098 .FOR MT.TELESCOPE 102A C Nonestab
66) DIAL SCALE TELESCOPE 102A[74]() Specification : DIAL SCALE,II TO DRG.NO. MCT-3109.FOR MT.TELESCOPE 102A C Nonestab
67) DIAL SCALE 1 TO DRG NO MCT 3093 FOR MT TELESCOPE 102A[74]() Specification : DIAL SCALE -1 TO DRG.NO.MCT-3093 FOR MT.TELESCOPE 102A C Nonestab
68) DOVETAIL COMPLETE TO DRG NO MCT 2230 3 FOR DAY SIGHT RIFLE[74]() Specification : DOVETAIL COMPLETE TO DRG NO.MCT-2230/3 FOR DAY SIGHT RIFLE 5.56MM C Nonestab
69) HOUSING ASSLY MCT2288 COMPRISING OF MCT2397 1 MCT 2396 MCT 2290[74]() Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290 C Nonestab
70) KNOB ASSY[74]() Specification : KNOB ASSY(551+441)TO MCT-2316/1 COMPRNG. (1).KNOB MARKED MCT-2276/1:1/SET,(2)LOCKING SLEEVE MCT-2303/1:-1/SET,(3).CMPRN SPRING MCT-2304/1 1/SET,(4).RETAINING RING :-1/SET, (5).BALL DIA 3.00MM:-3/SET (6).RTNG KNOB MCT2308:1/SET,(7).KNOB MC C Nonestab
71) MACHINING OF BASE AS PER DRG NO MCT 3471 FOR MOUNT TELE 102A[74]() Specification : MACHINING OF BASE AS PER DRG.NO. MCT-3471 FOR MOUNT TELE. 102A. NOTE:- CASTING WILL BE SUPPLIED BY OFD C Nonestab
72) MACHINING OF FRAME BODY AS PER DRG MCT 2287 2 OF QUADRANT FIRE CONTROL[74]() Specification : MACHINING OF FRAME(BODY) AS PER DRG MCT 2287/2 OF QUADRANT FIRE CONTROL. NOTE: CASTINGS OF BODY WILL BE SUPPLIED BY OFD. C Nonestab
73) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 1 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2. C Nonestab
74) RING TO DRG NO MCT 1992 FOR GNVP[74]() Specification : RING TO DRG.NO.MCT-1992 FOR GNVP C Nonestab
75) SLIDE ASSEMBLY[74]() Specification : "SLIDE ASSEMBLY DRG.NO.MCT-1885 COMPRISING OF MCT-1880/1,1865/1,1861/1,1868/1,1867/1,1863, 1859/1,1864/1,1871/1,1872/1,1866/1,1870/1,1874/1,1873/1, 1862/1,1869/1. " C Nonestab
76) STEEL PIPE AS PER DRG NO MCT 2825 2 FOR MK III[74]() Specification : STEEL PIPE AS PER DRG.NO.MCT-2825/2 FOR MK-III C Nonestab
77) MACHINING OF CASING UPPER[74]() Specification : MACHINING OF CASING UPPER AS PER DRG. NO.IRDE 1810/2 / MCT-2390/1 FOR COMMANDER DAY EPISCOPE. NOTE:SHATTER ALLOY CASTING AS PER DRG.NO ODD/C/826/2 WILL BE SUPPLIED BY OFD. C Nonestab
78) CASE OPTICAL INSTRUMENT AS PER DRG NO IRDE 1810 2 FOR COMMANDER DAY EPISCOPE[74]() Specification : CASE,OPTICAL INSTRUMENT AS PER DRG.NO.IRDE-1810/2 FOR COMMANDER DAY EPISCOPE. C Nonestab
79) MACHINING OF HOUSING LOWER[74]() Specification : MACHINING OF HOUSING LOWER AS PER DRG. NO.IRDE 1809/4/MCT-2389. FOR DRIVERS DAY SIGHT (SIDE) NOTE:CASTING AS PER ODD/C/965 WILL BE SUPPLIED BY OFD. C Nonestab
80) HOUSING FIRE CONTROL INSTRUMENT AS PER DRG NO IRDE 1809 3 FOR DRIVER DAY PERISCOPE SIDE[74]() Specification : HOUSING,FIRE CONTROL INSTRUMENT AS PER DRG.NO.IRDE-1809/3 FOR DRIVER DAY PERISCOPE(SIDE). C Nonestab
81) MACHINING OF HOUSING LOWER PRISM[74]() Specification : MACHINING OF HOUSING LOWER PRISM AS PER DRG IRDE 1808/5/MCT-2391. FOR DRIVERS DAY SIGHT CENTRAL NOTE: CASTING AS PER ODD/C/963 WILL BE SUPPLIED BY OFD. C Nonestab
82) MACHINING OF HOLDER UPPER PRISM[74]() Specification : MACHINING OF HOLDER UPPER PRISM AS PER DRG.NO.IRDE 1808/6,/ MCT-2399 FOR DRIVES DAY SIGHT (CENTRAL) NOTE:CASTINGS AS PER ODD/C/964 WILL BE SUPPLIED BY OFD. C Nonestab
83) CASE OPTICAL INSTRUMENT AS PER DRG NO IRDE 1808 4 FOR DRIVER DAY PERISCOPE CENTRAL[74]() Specification : CASE,OPTICAL INSTRUMENT AS PER DRG.NO.IRDE-1808/4 FOR DRIVER DAY PERISCOPE(CENTRAL) C Nonestab
84) MACHINING OF HOUSING WINDOW GLASS[74]() Specification : MACHINING OF HOUSING WINDOW GLASS AS PER DRG NO.IRDE- 2051/49, MCT-2400/1 FOR GUNNERS UNITY WINDOW NOTE : CASTINGS ASPER ODD/C/930/1 WILL BE SUPPLIED BY OFD. C Nonestab
85) BRACKET DRG NO IRDE 2048 1 MCT 3150[74]() Specification : BRACKET DRG NO.IRDE 2048/1 MCT-3150 C Nonestab
86) BKT MTG OPT HINGE DRG NO IRDE 2048 6 MCT 2090[74]() Specification : BKT.MTG.OPT.HINGE DRG NO.IRDE-2048/6 MCT-2090 C Nonestab
87) DOVE TAIL BOX DRG NO IRDE 2048 42 MCT2099[74]() Specification : DOVE TAIL BOX DRG NO.IRDE-2048/42 MCT-2099 C Nonestab
88) HOUSING GEAR RIGHT DRG NO IRDE 2048 53 MCT 2106 1[74]() Specification : HOUSING GEAR(RIGHT) DRG NO.IRDE-2048/53 MCT-2106/1 C Nonestab
89) PLATE RETAINING BEARING[00]() Specification : HOUSING MECHANICAL DRIVE INVESTMENT CASTING DRG.NO.ODD/C/732/1 C Nonestab
90) SUPPORT DOVE PRISM ASSEMBLY TO DRG NO IRDE 1175 17[74]() Specification : SUPPORT,DOVE PRISM ASSEMBLY TO DRG.NO.IRDE-1175/17 C Nonestab
91) COVER TO DRG NO IRDE 1175 59 SHT 2 OF 3 FOR DIAL SCALE WITH POINTER[74]() Specification : COVER TO DRG.NO. IRDE-1175/59 SHT 2 OF 3. FOR DIAL SCALE WITH POINTER. C Nonestab
92) BEARING SLEEVE DRG NO IRDE 1175 108[74]() Specification : BEARING SLEEVE DRG NO.IRDE-1175/108 C Nonestab
93) LEG ASSEMBLED TO DRG NO CII 641 A MCT 2702[74]() Specification : LEG ASSEMBLED TO DRG NO.CII-641/A MCT-2702 C Nonestab
94) TRAP DRG NO MCT 993 FOR D 7[74]() Specification : TRAP DRG NO.MCT-993 FOR D-7 C Nonestab
95) MACHINING OF LEVER TO DRG NO MCT 2462 CASTING[74]() Specification : MACHINING OF LEVER TO DRG.NO.MCT-2462 CASTING WILL BE SUPPLIED BY OFDUN. C Nonestab
96) MACHINING OF BEARING MOUNTED MCT 2465 1 CASTING[74]() Specification : MACHINING OF BEARING MOUNTED MCT-2465/1, CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN. C Nonestab
97) MACHINING OF BASE PLATE TO DRG NO MCT 2464 1 CASTING[74]() Specification : MACHINING OF BASE PLATE TO DRG.NO.MCT-2464/1 CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY OF DUN. C Nonestab
98) MACHINING OF SLIDE TO DRG NO OS 24466 MCT 2448 CASTING[74]() Specification : MACHINING OF SLIDE TO. DRG. NO.OS-24466 MCT-2448. CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN. C Nonestab
99) COVER BODY FOR DIRECTOR FIRE CONTROL NO7 DRG NO MCT 2460[74]() Specification : COVER,BODY FOR DIRECTOR FIRE CONTROL NO7 DRG.NO.MCT-2460. C Nonestab
100) RING FOR DIRECTOR FIRE CONTROL NO 7 DRG NO OS 13622 MCT 2440[74]() Specification : RING FOR DIRECTOR FIRE CONTROL NO.7. DRG.NO.OS-13622,MCT-2440.WO.29374. C Nonestab
101) HEAD DRG OS 13615 MCT 2833[74]() Specification : HEAD TO DRG.OS-13615,MCT-2833, FOR DFC-7 WO.30352. C Nonestab
102) PLUNGER DRG OS 13570 MCT 2832[74]() Specification : PLUNGER TO DRG.OS-13570,MCT-2832 , FOR DFC-7,WO.29432. C Nonestab
103) BUSH TO DRG OS 13616 MCT 2834[74]() Specification : BUSH TO DRG.OS-13616,MCT-2834 FOR DFC-7 WO.30032. C Nonestab
104) CASE TO DRG NO MCT 2428 1[74]() Specification : CASE TO DRG NO. MCT-2428/1 C Nonestab
105) LEVER TO DRG NO OS 10643 MCT 2482 1[74]() Specification : LEVER TO DRG.NO.OS-10643 MCT-2482/1 C Nonestab
106) PLATE TO DRG NO MCT 2476[74]() Specification : PLATE TO DRG.NO. MCT-2476 C Nonestab
107) ADAPTER TO DRG NO MCT 2875[74]() Specification : ADAPTER TO DRG.NO. MCT-2875 C Nonestab
108) MACHINING OF BOX AS PER DRG NO MCT 2469 2 CASTING[74]() Specification : MACHINING OF BOX AS PER DRG.NO.MCT-2469/2 CASTING WILL BE SUPPLIED BY OFD C Nonestab
109) HOUSING BEARING UNIT IRDE 68 3[74]() Specification : HOUSING BEARING UNIT,IRDE:68/3 C Nonestab
110) MACHINING OF CASTING TO DRG NO CWC 240 56 FOR HOUSING[74]() Specification : MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING C Nonestab
111) HEAD DRG NO OS 13628[74]() Specification : HEAD DRG.NO.OS-13628 C Nonestab
112) BLOCK DRG NO MCT 2485[74]() Specification : BLOCK DRG.NO.MCT-2485 C Nonestab
113) METAL CASE TO DRG NO MCT 1999 FOR BORE MUZZLE SIGHT[74]() Specification : METAL CASE TO DRG NO. MCT-1999 FOR BORE MUZZLE SIGHT. C Nonestab
114) LIGHT INSTRUMENT TO DRG NO IRDE 1129 MCT 3056 COMPLETE[74]() Specification : LIGHT INSTRUMENT TO DRG.NO.IRDE-1129 , MCT-3056(COMPLETE),WO.38421.FOR SUC-102B FOR SUC-102B. C Nonestab
115) HOUSING FOR POINTER DIAL CONTROL MCT 3132 FOR SIGHT DIAL 104A[74]() Specification : HOUSING FOR POINTER DIAL CONTROL MCT-3132 FOR SIGHT DIAL 104A C Nonestab
116) HOLDER DRG IRDE 1175 45 SHT 2 FOR SIGHT DIAL 104A[74]() Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045. C Nonestab
117) RETAINER TO DRG NO MCT 3240 1 FOR SIGHT DIAL 104A[74]() Specification : RETAINER TO DRG.NO.MCT-3240/1 FOR SIGHT DIAL 104A C Nonestab
118) DIAL CONTROL FIXED TO DRG NO MCT 3242 FOR SIGHT DIAL 104A[74]() Specification : DIAL CONTROL FIXED TO DRG.NO.MCT-3242 FOR SIGHT DIAL 104A C Nonestab
119) SCALE FIXED WITHOUT ENGRAVING AS PER DRG NO MCT 3266 1 FOR SIGHT UNIT CASED 102B[74]() Specification : SCALE FIXED (WITHOUT ENGRAVING) AS PER DRG.NO.MCT-3266/1 FOR SIGHT UNIT CASED 102B. C Nonestab
120) CELL AS PER DRG NO MCT 3279[74]() Specification : CELL AS PER DRG.NO.MCT-3279 C Nonestab
121) BEARING AS PER DRG NO MCT 3281 FOR COLLIMETER INFINITY 102 A[74]() Specification : BEARING AS PER DRG.NO.MCT-3281 FOR COLLIMETER INFINITY 102 A C Nonestab
122) BRACKET AS PER DRG NO MCT 3282[74]() Specification : BRACKET AS PER DRG.NO.MCT-3282 C Nonestab
123) BLOCK AS PER DRG NO MCT 3283 FOR COLLIMETER INFINITY 102 A[74]() Specification : BLOCK AS PER DRG.NO.MCT-3283 FOR COLLIMETER INFINITY 102 A C Nonestab
124) CASE VIAL LEVEL AS PER DRG NO MCT 3284[74]() Specification : CASE VIAL LEVEL AS PER DRG.NO.MCT-3284 C Nonestab
125) BUSHING BLANK MCT 1113 2[74]() Specification : BUSHING BLANK,MCT-1113/2 C Nonestab
126) HOUSING EP COMPRISING OF FOLLOWINGS HOUSING EP IRDE 1274 8 AND KNOB IRDE 1274 9[74]() Specification : HOUSING EP COMPRISING OF FOLLOWINGS HOUSING EP IRDE-1274/8 AND KNOB IRDE-1274/9 C Nonestab
127) TUBE LEVEL INDICATOR AS PER DRG NO MCT 3250 SHEET NO2[74]() Specification : TUBE LEVEL INDICATOR AS PER DRG.NO.:MCT-3250(SHEET.NO.2) C Nonestab
128) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]() Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A C Nonestab
129) SLIDE TO DRG NO CQA I 792 34[74]() Specification : SLIDE TO DRG NO. CQA(I)-792/34 C Nonestab
Category : p
Grade : Grade III
Size : S
4052 POLYMER & COATING CO.
GAT NO 170, PLOT NO 26, AT DHANORE, KHED PUNE MAHARASHTRA
PIN1 : 412105
Phone No. : 9422523190 		AABFP2523N

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) APC.NO.210(N.C.LACQUER UNDYED)() Specification : JSS 8010-64-2015 R Estab
2) PAINT RFUADMF RED SIGNAL() Specification : SPECN IS:168-1993 (3RD REV.) (AS APPLICABLE FOR DEFENCE USE) WITH ADDL.CLAUSES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209 /UPS DATED 16-02-89 & CQA/ME/7209/UPS/2 DT. 24/10/90 R Estab
3) AMMUNITION SEALING COMPOSITION NO 9() Specification : JSS:8030-15: 2015 REV. 3 R Estab
4) APC 210 (NC LACQUOR UNDYED)(FOR CT) Description : APC 210 (NC LACQUOR UNDYED)(FOR CT)() Specification : JSS 8010-64-2015 (REV. NO.3) ( FOR CIVIL TRADE ) R Estab
5) PAINT RM STEN SGF GOLDEN YELLOW() Specification : IS 138-1992 3RD REV.WITH A.NO.1 R Estab
6) PAINT RMADB SGF MIDDLE BUFF ISC 359() Specification : IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90 R Estab
7) PAINT RM RED SIGNAL STN.SEMIGLOSSY() Specification : IS:138- 1992 (THIRD REVISION)(AS APPLICABLE FOR DEFENCE USE),SPECIAL REQUIREMENT R Estab
8) APC NO 215(VARNISH OIL BITU.RD-1219() Specification : SS 8010 -51 2015 Rev 4 R Estab
9) PAINT RFU FINI AMN ADMFB OLIV GREEN() Specification : IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90 R Estab
10) AMMN PROTECTIVE COMPO NO104 2609-ME() Specification : JSS 8010-45 : 2012 REV 2 DC 5089-ME R Estab
Category : p
Grade : 3
Size : S
1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) PAINT RM STENS GF Description : PAINT RM STENS GF() Specification : IS: 138-1992 (THIRD REV) REAFF 2014, WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50 R Estab
Category : p
Grade : 3
Size : S
4053 SIP TOOLS
W-169/166, DOMBIVALI MIDC, DOMBIVALI - 421 204, THANE , MUMBAI, MAHARSHTRA DOMBIVALI MIDC DOMBIVALI Maharashtra
PIN1 : 421204
Phone No. : 2871073
GSTIN : 27AAEFS8001K1Z4 		AAEFS8001K

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 8022250001 MACH ASS LOW TURRET MTSK 276 4160 1 [80]() Specification : MACH.ASS.LOW.TURRET MTSK-276-4160-1 C Estab
2) 8022250002 MACH ASS FOR UPR CAGE MTSK 276 4180 [80]() Specification : MACH.ASS.FOR UPR.CAGE,MTSK-276-4180 C Estab
Category : p
Grade : Grade III
Size : S
4054 MAHADEV DEFENCE PACKTECH PVT. L
510, PALLI ROAD, CHAKERI VILLAGE, POST SANIGWAN KANPUR UTTAR PRADESH
PIN1 : 208021
Phone No. : 9336666074 		AACCS4908C

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BOX B 201 MK I() Specification : DRG. NO. ARM 1477C R Estab
2) AMMN.CONT.BOX H-76 MK1 DRGNO 1A 914() Specification : IA 948 R Estab
3) BOX NO.279 MK1 TO HOLD 40 DETONATER() Specification : DRG.NO. ARM 1466 D1 BASED ON DD(L) 8008 R Estab
4) BOX WOOD PKG TO DRG.AFK/SK-2823() Specification : DRG NO. AFK/SK - 2823 R Estab
Category : p
Grade : 3
Size : S
4055 BIHANI UDYOG
303-A (3rd Floor)JAIPUR TOWER M.I. ROAD JAIPUR RAJASTHAN
PIN1 : 302001
Phone No. : 0761-2743368 		302001B005

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CARRIER 12A ISV-470A ASY"A"FOR HEAT Description : CARRIER 12A ISV-470A ASY"A"FOR HEAT() Specification : CARRIER AMMUNITION, 12-A (PLASTIC) TO DRG PT NO ISV-470-A DC-36999A DT.02-02-05 WITH SHOCK ABSORBER ASSY. "A" TO DRG.PT NO.ISV-146-SA DC-35855-A DT.23-11-94 TO SPECIFICATION :CQA(A) 2804 (m) DC-36202-A DT.7-11-96. P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CARRIER 12A ISV-470A ASY"A"FOR HEAT Description : CARRIER 12A ISV-470A ASY"A"FOR HEAT() Specification : CARRIER AMMUNITION, 12-A (PLASTIC) TO DRG PT NO ISV-470-A DC-36999A DT.02-02-05 WITH SHOCK ABSORBER ASSY. "A" TO DRG.PT NO.ISV-146-SA DC-35855-A DT.23-11-94 TO SPECIFICATION :CQA(A) 2804 (m) DC-36202-A DT.7-11-96. P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CARRIER 12A ISV-470A ASY"A"FOR HEAT Description : CARRIER 12A ISV-470A ASY"A"FOR HEAT() Specification : CARRIER AMMUNITION, 12-A (PLASTIC) TO DRG PT NO ISV-470-A DC-36999A DT.02-02-05 WITH SHOCK ABSORBER ASSY. "A" TO DRG.PT NO.ISV-146-SA DC-35855-A DT.23-11-94 TO SPECIFICATION :CQA(A) 2804 (m) DC-36202-A DT.7-11-96. P Estab
Category : p
Grade : 3
Size : S
4056 RELY PAINTS PVT. LTD.
PLOT NO. 7 & 8, KHASRA NO. 1323 MEETUT ROAD, VILL-MORTA GHAZIABAD UTTAR PRADESH
PIN1 : 201003
Phone No. : 9873729499
GSTIN : 09AAGCR0685P1ZN 		DELR27342A

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY, TYPE-BRUSHING CONSISTENCY Description : PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY, TYPE-BRUSHING CONSISTENCY() Specification : SPECN. IS-168 -REAFFIRMED 2012 APPLICABLE FOR DEFENCE USE & COLOUR SHADE ISC NO.359 OF IS:5-2007 (6TH REVISION) AMMENDMENT NO.1. (TO BE SUPPLIED IN 5 LTRS PACK) R Estab
Category : p
Grade : 3
Size : S
4057 FLUORINE CHEMICALS PVT. LTD.
A/5, MODEL TOWN, BALRAJESHWAR ROAD MULUND (WEST) MUMBAI MAHARASHTRA
PIN1 : 400080
Phone No. : 9892331230 		AAACF4153E

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SODIUM ALUMINIUM FLUORIDE (CRYOLITE) Description : SODIUM ALUMINIUM FLUORIDE (CRYOLITE)() Specification : SODIUM ALUMINIUM FLUORIDE (CRYOLITE) TO JSS-6810-73-2010 REV-2. R Estab
Category : p
Grade : 3
Size : S
4058 JOSEPH LESLIE DYNAMIKS MFG PVT
LESLICO HOUSE BHAVANISHANKAR ROAD DADAR, MUMBAI MAHARASHTRA
PIN1 : 400028
Phone No. : 9176651788
GSTIN : 27AAACJ2779A1ZR 		AAACJ2779A

Download 		1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) NBC FILTER FAT200M Description : NBC FILTER FAT200M() Specification : DRDE/TC/00287/NBCD/90-91/SPEC-1,CAT/PARTNo.K9/4240-000069 E Estab
Category : p
Grade : 2
Size : S
4059 VEM TECHNOLOGIES P LTD
8-48-1, BACHUPALLY INDL AREA, QUTHBULLAPUR, MANDAL, R.R DIST HYDERABAD TELANGANA
PIN1 : 500090
Phone No. : 8886023335
GSTIN : 36AABCV0595K1Z0 		AABCV0595K

Download 		1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) CONNECTOR PLUG TO PART NO 9P56 08 0 Description : CONNECTOR PLUG TO PART NO 9P56 08 0() Specification : CONNECTOR PLUG TO PART NO 9P56 08 0 C Estab
Category : p
Grade : 2
Size : S
4060 Sumino Tech Inc
B-729 Steel chamber Towers, Kalamboli Raigad Maharashtra
PIN1 : 410218
Phone No. : 0761-2743368 		0000TR0218

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) INDUSTRIAL X RAY FILM 300MMX400MM LF 2513454033 Description : INDUSTRIAL X RAY FILM 300MMX400MM LF 2513454033() Specification : INDUSTRIAL X RAY FILM 300MMX400MM NDT65/D- 7 P Estab
Category : p
Grade : 3
Size : S
4061 KARAN AGENCIES LESSEETHE
KOLAHAPUR SUGAR MILLS LIMITED (DISTILLERY DIVISION) , KASABA BAWADA KOLAHAPUR MAHARASHTRA
PIN1 : 416006
Phone No. : 0231126455010 		AADFK2995B

Download 		1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) RECTIFIED SPIRIT GRADE 1 Description : RECTIFIED SPIRIT GRADE 1() Specification : IS : 323-2009, REAFF-2014 (II ND REVISION) (LATEST ISSUE) R Estab
Category : p
Grade : 2
Size : M