List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3961 M D TRADERS
7858, NAI BASTI, CHAMELIAN ROAD BARA HINDU RAO NAI BASTI, CHAMELIAN ROAD BARA HINDU RAO DELHI Delhi
PIN1 : 110006
Phone No. : 23535008
GSTIN : 07ADKPD1536B1Z5 		ADKPD1536B

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Eyelet Steel[21]() Specification : EYELET STEEL EYELET STEEL SCHEDULE NO. DMSRDE/LE2/2000/EYELET R Estab
2) SNAP FASTENER FOUR PIECES SPRING TYPE 7 BY 7 WITH PLASTIC WASHER[21]() Specification : SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 1 R Estab
3) Polypropylene Strapping zero point five mm Thick and 12 mm wide in white colour[21]() Specification : Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through R Estab
4) Tape Adhesive Brown 50 mm Duly Printed with OCF name or Trade Mark[21]() Specification : No.JSS:8046-6 & SS No.CIGS/SS/126(a) R Estab
5) Tape Self Adhesive Transparent WP 75 mm Minimum width[21]() Specification : No.JSS:8040-8:2001(Revision No.1) R Estab
6) SET FASTENER HOOK AND LOOP TAPE SYNTHETIC 38 MM WHITE[21]() Specification : IS:8156-1994,REAFFIRMED-2009. R Estab
7) FASTENERS LOOP TAPE SYNTHETIC 25 MM BLACK[21]() Specification : IS:8156-2014, REAFFIRMED -2014 R Estab
8) SET OF FASTENER HOOK AND LOOP TAPE SYNTHETIC 25 MM WHITE[21]() Specification : SET OF FASTENER HOOK & LOOP TAPE SYNTHETIC 25 MM WHITE SPECN. NO. IS:8156-2014, REAFFIRMED-2014. R Estab
9) SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE[21]() Specification : SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014 R Estab
10) MS GALVANIZED SEAL FOR 12 MM WIDE POLYPROPYLENE STRAPPING[21]() Specification : MS GALVANIZED SEAL FOR 12 MM WIDE POLYPROPYLENE STRAPPING SPECIFICATION: - BEST TRADE QUALITY R Estab
11) HOOK STEEL[21]() Specification : HOOK STEEL SPECIFICATION :- AS PER DETAILS GIVEN ON PLATE NO. - 2 OF ATTACHED DRAWING WITH SPECIFICATION NO. JSS 4240-03 : 2011 R Estab
12) D RING 18 MM[21]() Specification : D RING 18 MM SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94/1(a) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
13) PLASTIC STOPPER OG[21]() Specification : PLASTIC STOPPER OG SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94(2) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
14) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]() Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511 AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
15) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
16) PLASTIC ZIPPER PULL WITH STRAP PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC ZIPPER PULL WITH STRAP, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PZPS & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY. R Estab
17) PLASTIC RING FOR CORD PSN 19 0511[21]() Specification : PLASTIC RING FOR CORD PSN 19-0511 AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
18) PLASTIC ANTIQUE TIP PSN 19 0511 TPX[21]() Specification : PLASTIC ANTIQUE TIP PSN 19-0511 TPX AS PER DRAWING, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PAT & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY R Estab
19) LOW DENSITY POLYTHENE FILM 0 POINT 05 MM THICK 91 POINT 5 CM WIDE IN ROLL OF MIN 100 METER[21]() Specification : LOW DENSITY POLYTHENE FILM 0.05 MM THICK 91.5 CM WIDE IN ROLL OF MIN 100 METER SPECIFICATION :- IS:2508:1984 (2ND REVISION REAFFIRMED 2008 AMD 3) R Estab
20) SNAP FASTENERS FOUR PIECE[21]() Specification : SNAP FASTENERS FOUR PIECE AS PER SAMPLE HELD WITH OCFS PANTONE SHADE NO. 19-0511 BEST TRADE QUALITY & AS PER SAMPLE HELD WITH OCFS R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Plastic Button Reversible 19 mm in Matching printed pattern Thermosetting[21]() Specification : Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting) Specification No- IS:1461 1984(second Revision) reaffirmed 2003, Except that shape & design as per annexure "A" attached and feel & finish as per sample held in R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Eyelet Alum Alloy No W Washer[21]() Specification : EYELET ALUM ALLOY NO. WITH WASHER, NS-3 ALLOY CHEMICALLY PASSIVATED NO. 24. SPECNS:- IS:4084-1978 (FIRST REVISION) REAFFIRMED 2013, AMD-2 R Estab
2) PLASTIC ANTIQUE TIP BLACK[21]() Specification : LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS R Estab
3) Button Polyester 19 mm OG[21]() Specification : IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b) Except that: (i) Material shall be polyester. (ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002). (iii) In app R Estab
4) DEES STEEL 38 MM X 32 MM X 4 MM A F[21]() Specification : DEES STEEL 38 MM X 32 MM X 4 MM A.F SPECN:- As Per Details given in Specn NO. S/2532/Bag Kit Universal(OG)/TC-6 and confirming to spec no.CQA(GS)/US/426(a) except size, Cadmium plated as per IS:1572-1986, Gd-B, Type-2 for production of R Estab
5) Buckle Aluminum Alloy 38 mm Black Anodised[21]() Specification : CQA (GS)/US/324 Except Size & Attached Relevant Drawing R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur

[ENR Registration]
Name Specification Use Status
1) EYELET BRASS NO.21 & 28 WITH PLAIN/TURNOVER WASHER BRONZED BLACK() Specification : IS 4084 : 1978 R Estab
2) SELF ADHESIVE POLYTHENE.BAG VARIOUS SIZES() Specification : Unsealed Specn. No. CQA (GS)/US/434 (a) R Estab
3) POLYTHENE BAG (90 X 75) CM,,0.04 MM THICK() Specification : JSS : 9330-02 : 2014 (Rev. No. 3) R Estab
4) NICKEL COATED SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER() Specification : IS 4741 : 1968 R Estab
Category : p
Grade : 3
Size : S
3962 RUBBER EQUIPMENT & ENGINEERING CO. PVT. LTD
4C GARSTIN PLACE, KOLKATA - 700 001 GARSTIN PLACE KOLKATA West Bengal
PIN1 : 700001
Phone No. : 22486342
GSTIN : 19AABCR5920J1Z7 		AABCR5920J

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) RING DUST EXCLUDER TO DRG NO 5067781 Description : RING DUST EXCLUDER TO DRG NO 5067781() Specification : RING DUST EXCLUDER TO DRG.NO.5067781. C Estab
Category : p
Grade : 3
Size : M
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B Description : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B() Specification : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) THREAD PROTECTOR TO OFAJ DRG NO SM 1170 FOR 125MM SHELL HE Description : THREAD PROTECTOR TO OFAJ DRG NO SM 1170 FOR 125MM SHELL HE() Specification : as per drawing C Estab
Category : ddp
Grade : 1
Size : S
3963 J.M.INDUSTRIES
A-6 BAJRANGBALI INDUSTRIAL ESTATE SITE -4 KANPUR NAGAR Uttar Pradesh
PIN1 : 208022
Phone No. : 000000 		ADDPJ9625Q

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Sleeve Button Catch Magazine for JVPC Description : Sleeve Button Catch Magazine for JVPC() Specification : SLEEVE BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-005-00DA C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146 Description : Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146() Specification : AS PER DRG. C Estab
2) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12() Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 C Estab
3) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56 Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56() Specification : PIN LOCK SEAR SAFETY TO DRG.NO- ARDE/SK-3143/44 DS CAT NO.5315-009215 DC(I)NO.26934-SA DT.07.09.16. C Estab
4) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION() Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 C Estab
5) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
3964 MAHAVEER CHEMICAL INDUSTRIES
54, AKS NAGAR PONNAIYARAJAPURAM, COIMBATORE TAMIL NADU
PIN1 : 641001
Phone No. : 0422-2470367
GSTIN : 33AAAHR5227E2ZI 		AAAHR5227E

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CARBON BLACK Description : CARBON BLACK() Specification : CARBON BLACK. SPECN: JSS 6810-81: 2016 (REV No.3) DS CAT No.:- CARBON BLACK TYPE-4 6810-001130 DC No. 5490-ME DT. 24-09-2016 R Estab
Category : s
Grade : 3
Size : S
3965 RASHTRIYA METAL INDUSTRIES LTD
SIR MATHURADAS VASANJI ROAD, J.B.NAGAR MUMBAI MAHARASHTRA
PIN1 : 400059
Phone No. : 07612743368 		400059R075

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505) Description : BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505)() Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30 R Estab
2) BRASS STRIP LF 0710291559 Description : BRASS STRIP LF 0710291559() Specification : BRASS STRIP 20+/-0.50 MM WIDE X 0.497+/- 0.020 MM THICK IN COIL OF 8 METERS MINIMUM. TO SPECN:-BS-2870-1980, CZ-102,HALF HARD, HARDNESS 100-115 VPN R Estab
3) BRASS STRIP 24X0.457MM IS:410CUZN30 (0710661145) Description : BRASS STRIP 24X0.457MM IS:410CUZN30 (0710661145)() Specification : BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION. R Estab
4) BRASS STRIP 14.5X0.69MM BS2870CZ106 (0710664184) Description : BRASS STRIP 14.5X0.69MM BS2870CZ106 (0710664184)() Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO R Estab
5) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345) Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)() Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90 R Estab
6) BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177) Description : BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177)() Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN R Estab
7) BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195) Description : BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195)() Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD R Estab
8) BRASS STRIP 31.75X0.558MM (0710760997) Description : BRASS STRIP 31.75X0.558MM (0710760997)() Specification : BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a). R Estab
9) BRASS STRIP 20X0.71MM IS:410 CUZN37 (0710790020) Description : BRASS STRIP 20X0.71MM IS:410 CUZN37 (0710790020)() Specification : BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM. R Estab
10) BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346) Description : BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346)() Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120 R Estab
11) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132) Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)() Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM. R Estab
12) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159) Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)() Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED) R Estab
13) COPPER STRIP 31.75X1.448MM IS:3167 (0717160907) Description : COPPER STRIP 31.75X1.448MM IS:3167 (0717160907)() Specification : COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV. R Estab
14) BRASS STRIP 18X0.9MM JSS:9535-02 (0717560019) Description : BRASS STRIP 18X0.9MM JSS:9535-02 (0717560019)() Specification : BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN. R Estab
15) BRASS STRIP 28.0X0.57MM JSS-9535-02 (0717560057) Description : BRASS STRIP 28.0X0.57MM JSS-9535-02 (0717560057)() Specification : BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA. R Estab
16) BRASS STRIP 31.75X0.71MM JSS9535-2 (0717560186) Description : BRASS STRIP 31.75X0.71MM JSS9535-2 (0717560186)() Specification : BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3) R Estab
17) BRASS STRIP LF 0717560694 Description : BRASS STRIP LF 0717560694() Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED). R Estab
18) BRASS STRIP 70X2.29MM JSS:9535-02 (0717560924 Description : BRASS STRIP 70X2.29MM JSS:9535-02 (0717560924() Specification : BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND. R Estab
19) BRASS STRIP 25.4X0.63 MM (0717560949) Description : BRASS STRIP 25.4X0.63 MM (0717560949)() Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1 R Estab
20) BRASS STRIP 28.44X1.32MM JSS9535-02 (0717560970) Description : BRASS STRIP 28.44X1.32MM JSS9535-02 (0717560970)() Specification : BRASS STRIP 1.12"X0.052"(28.44X1.32MM) to SPECN.JSS 9535-02:1995 REVISION NO.1. R Estab
21) BRASS STRIP60.32X.315MM IS410CUZN30 (0717561907) Description : BRASS STRIP60.32X.315MM IS410CUZN30 (0717561907)() Specification : BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981. R Estab
Category : p
Grade : 3
Size : S
3966 S.H. MOHD. AHMED ALLAWALA
1357, PUNJABI PHATAK, BALLIMARAN DELHI DELHI
PIN1 : 110006
Phone No. : 011-23954233 		AEFPA0328E

Download 		1) Ordnance Equipment Factory Hazaratpur

[ENR Registration]
Name Specification Use Status
1) COUNTRY JUTE TWINE 3 PLY() Specification : IS 1912 : 1984 R Estab
2) 100 %Polyester Tape 12.7 MM White TAPE ADHESIVE FILM BASED 13 MM WIDE() Specification : IND/GS/1534 R Estab
3) POLYTHENE BAG (90 X 75)CM, 0.04 MM THICK() Specification : JSS:9330-02:2014 (Rev. No. 3) R Estab
4) SILICA GEL BAG 50 GM() Specification : IS 3401:1992 R Estab
5) POLYPROPYLENE STRAP 0.55 MM THICK WIDTH 12 MM() Specification : JSS:8135-10:2004 (Rev. No. 1), Reaffirmed 2011, Amdt. No. 1 R Estab
6) MACHINE STRAPPING SEAL STEEL 12 MM() Specification : AS PER SPECIFICATION R Estab
7) TAPE ELASTIC 15 MM, 25 MM, 50 MM WHITE() Specification : IS 9686 : 1980 R Estab
8) TAPE ADHESIVE 50 MM WIDE() Specification : JSS:8040-08:2007 (Rev. No. 2) R Estab
9) PSL FOR IDENTIFICATION OF CANOPY() Specification : AS PER SPECIFICATION R Estab
10) PSL FOR IDENTIFICATION OF PACK COVER OF ECAD PARAPRINTED 142 CM V.NO.4 Description : CLOTH DRILL COTTON DISRUPTIVE PATTERN VAT PRINTED 142 CM V.NO.4() Specification : AS PER SPECIFICATION R Estab
11) PSL FOR IDENTIFICATION COMPLETE WITH PACK OF ECAD() Specification : AS PER SPECIFICATION R Estab
12) WASHING INSTRUCTION LABEL() Specification : AS PER SPECIFICATION R Estab
13) P.S.L BILINGUAL FOR NET MOSQUITO RM POLYESTER FR Description : Fabrication of Net Mosquito Flam Retardant White() Specification : AS PER SPECIFICATION R Estab
14) POLYTHENE BAG SIZE W-39 CM X L- 73 CM, 0.04 MM THICK() Specification : Unsealed Specn. No. CQA(GS)/US/434 (a) R Estab
15) PLASTIC BUTTON REVERSIBLE 19 MMM() Specification : IS 1461:1984 R Estab
16) SELF SEALING POLY.BAG (560 X 660) mm X 0.08 MM THICK() Specification : Unsealed Specn. No. CQA(GS)/US/434 (a) R Estab
17) BILINGUAL PSL RAIN CAPE MP DISP() Specification : AS PER SPECIFICATION R Estab
18) BUTTON PLASTIC DARK DRAB 16 MM() Specification : IS 1461:1984 & Suppl. Sch. No. CQA (GS)/SS/346 (b) R Estab
19) PRNTD WASHNG INST.LABEL FOR TROUS SERGE POLYWOOL 1973() Specification : AS PER SPECIFICATION R Estab
20) NAPHTHALENE BALLS() Specification : IS 539 : 1974 & IND/SL/0051 (a) R Estab
21) SET FASTNER HOOK & LOOP TAPE 25 MM OG() Specification : IS 8156 : 1994 R Estab
22) ELASTIC CORD BLACK() Specification : S/2594/CCD/ARMY LOGO/TC-15 (a) R Estab
23) SPRING TYPE CYLINDRICAL PLASTIC STOPP[ER BLACK() Specification : AS PER SPECIFICATION R Estab
24) PRINTED WASHING INSTRUCTION LABEL FOR COAT COMBAT() Specification : AS PER SPECIFICATION R Estab
25) BILINGUAL PRI.SIZE LABEL FOR COAT ECC (WIND CHEATER/INSULATING LAYER/ WAIST COAT)() Specification : AS PER SPECIFICATION R Estab
26) BUTTON POLYESTER 19 MM OG(CONVEX SHAPE)() Specification : IS 1461:1984 & DRG. NO. OCFAV/BUTTON/002 R Estab
27) PRINTED WASHING INST.LABEL FOR SHIRT MAN'S ANGOLA() Specification : AS PER SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
3967 YOHANA PAINT
E-2/100 ARERA COLONY, BHOPAL M.P.
PIN1 : 462016
Phone No. : 0755-2421970 		AAZPG0968N

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING Description : PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING() Specification : SPECIFICATION JSS 8010-68:2014 (REV.NO.3) E Estab
2) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004 Description : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004() Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004 E Estab
3) APC 221 AS PER SPECIFICATION 1011704021 Description : APC 221 AS PER SPECIFICATION 1011704021() Specification : APC 221 to Specn JSS 8010-28:2015(Rev-No.3) OR Specn JSS 8010-68:2014(Rev.No.3) Paint Ready Mixed Priming Red Oxide Zinc Chrome, Ammn., Air drying Matt Finish, Brushing/Spraying. E Estab
4) PAINT RFU BLACK ACID PROOF Description : PAINT RFU BLACK ACID PROOF() Specification : SPRAYING SPECN.IND/ME/651(A)DC(I)NO.3754-ME DT.12.12.2002 E Estab
5) PAINT RFU AMMUNITION BITUMINOUS BRUSHING ANTI CORROSIVE BLACK Description : PAINT RFU AMMUNITION BITUMINOUS BRUSHING ANTI CORROSIVE BLACK() Specification : JSS 8010-24:2014 (REV.NO.3) /LATEST ISSUE E Estab
Category : ddp
Grade : 1
Size : S
3968 VITZRO CELL
VITZRO BUILDING 4TH FLOOR 27-16 GUNJA-DONG KOREA KOREA
PIN1 : 0
Phone No. : 082 220243247 		AAAAAAAAAA

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) AMPOULE RESERVE BATTERY AS PER MTPF DRG NO 770 22 33 00 I AMPOULE BATTERY VITZROCELL VCG1525 10 XX Description : AMPOULE RESERVE BATTERY AS PER MTPF DRG NO 770 22 33 00 I AMPOULE BATTERY VITZROCELL VCG1525 10 XX() Specification : AMPOULE RESERVE BATTERY AS PER MTPF DRG.NO.770-22-33-00 i.e. AMPOULE BATTERY VITZROCELL VCG1525 10-XX C Estab
Category : ddp
Grade : 1
Size : L
3969 MAX STEELS
32/34 KESHAV BHUVAN, 2ND FLOOR, 1ST CARPENTER STREET, MUMBAI MAHARASHTRA
PIN1 : 400004
Phone No. : 022 23867943 		ACJPJ6055F

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA Description : STEEL ROUND TO SPECN IS 7283 1992 WITH PROPERTIES AS PER SPECN IS 2062 2006 AND SIZE 115 MM DIA() Specification : STEEL ROUND TO SPECN. IS:7283-1992 WITH PROPERTIES AS PER SPECN IS 2062-2006 DESIGNATION (FE 410 W) QUALITY-A HAVING STRAIGHT LENGTH OF 2 TO 3 METERS. SIZE: - 115.00 +2.00 MM DIA R Estab
Category : ddp
Grade : 1
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BRONZE FORGING FOR SHELL & SAFETY ARM Description : BRONZE FORGING FOR SHELL & SAFETY ARM() Specification : AL-BRONZE FORGING 75MM X 45MM IN MULTI E Estab
Category : s
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM ROD 9MM DIA SPECN IS-733-1983() Specification : IS -733-1983 DESIGNATION 19500 R Estab
Category : s
Grade : 3
Size : S
3970 GRAUER & WEIL (INDIA) LTD.
GROWEL HOUSE, AKURLI ROAD, KANDIVILI-EAST, MUMBAI MAHARASHTRA
PIN1 : 400101
Phone No. : 022-66993000
GSTIN : 27AAACG3741K1ZL 		MUMG08103E

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PAINT RFU AMMUNITION BITUMINOUS BRUSHING ANTI CORROSIVE BLACK Description : PAINT RFU AMMUNITION BITUMINOUS BRUSHING ANTI CORROSIVE BLACK() Specification : JSS 8010-24:2014 (REV.NO.3) /LATEST ISSUE E Estab
Category : ddp
Grade : 1
Size : S
3971 GAJ CHEMICALS
OLD No. 23, NEW No.82, NAINIAPPA NAICKEN STREET, PARK TOWN, CHENNAI TAMIL NADU
PIN1 : 600003
Phone No. : 044-25354330 		ADUPG0316Q

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) BARIUM NITRATE GR I Description : BARIUM NITRATE GR I() Specification : BARIUM NITRATE GR I -RETAINED ON 125 MICROMETRE IS SIEVE-NIL SPECN:JSS 6810-59:2016 DC-5480-ME DT. 24/09/2016. (REVISION No.4) R Estab
Category : s
Grade : 3
Size : S
3972 MINIMAX ENGINEERS
D-56, SITE NO.-2 PANKI INDUSTRIAL AREA KANPUR U.P.
PIN1 : 208022
Phone No. : 05122295042 		ABKPM8305N

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
Category : p
Grade : 3
Size : S
3973 R.N. INDUSTRIES
PLOT NO.648 VIJAY NAGAR (OLD) RANJHI JABALPUR M.P.
PIN1 : 482010
Phone No. : 07612743368 		482010R161

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061) Description : CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061)() Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP C Estab
2) PLATE ANGLE 64MM X 64MM FOR CRATES (9911358104) Description : PLATE ANGLE 64MM X 64MM FOR CRATES (9911358104)() Specification : DRG.NO. ISV 8 DC NO. 35855-A DT. 23/11/1994 R Estab
3) CENTRAL TUBE FOR BOMB 450 KG LF 9911358138 Description : CENTRAL TUBE FOR BOMB 450 KG LF 9911358138() Specification : CENTRAL TUBE WELDED TO DRG NO.TRD-212314. (DET-16 AEDE-2122 ) FOR BOMB 450 KG HSLD RDZ. R Estab
4) CENTRAL TUBE FOR BOMB LBS MK 11 RDZ LF 9911358218 Description : CENTRAL TUBE FOR BOMB LBS MK 11 RDZ LF 9911358218() Specification : CENTRAL TUBE FOR BOMB LBS MK 11 RDZ WITH REDUCED NEQ(NE&TE) TO DRG NO:khs-210305. R Estab
Category : p
Grade : 3
Size : S
3974 SHENDE SALES CORPORATION
470 SADASHIV PETH, OPP. NEW ENGLISH SCHOOL, TILAK ROAD, CROSS LANE, PUNE MAHARASHATRA
PIN1 : 411030
Phone No. : 02024488005
GSTIN : 27AAAPW8417B1ZQ 		PNEP14877C

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) RUBBER U SEAL MOULDING ON METAL RINGS Description : RUBBER U SEAL MOULDING ON METAL RINGS() Specification : AS PER GCF SPECIFICATION C Estab
Category : p
Grade : 3
Size : S
3975 SK Dynamics Pvt.Ltd.
B 5 Industrial Estate Near Ram Nagar Roorkee Uttarakhand
PIN1 : 247667
Phone No. : 263616
GSTIN : 05AAKCS1322G1ZP 		MRTS01805G

Download 		1) Small Arms Factory
Name Specification Use Status
1) Magnet Permanent for Firing Device[70]() Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141855521 FIRING DEVICE FOR MINE AP 1B DIR[61]() Specification : FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141855520 TESTING DEVICE FOR MINE AP 1B DIR[61]() Specification : TESTING DEVICE CIRCUIT CONTINUITY 1B (T2/1345-000429) TODRG. NO. CQA(I)-408 FOR MINE AP 1A/1B DIRECTIONAL & SPECN.NO. CQA (I)-265. C Nonestab
Category : p
Grade : Grade III
Size : S
3976 ALLIED ENGINEERS
61-O-1,BLOCK,DEVKI NAGAR YASODA NAGAR,KANPUR-208011 KANPUR UTTAR PRADESH
PIN1 : 208011
Phone No. : 7408898031
GSTIN : 09AAVFA6914E1Z6 		AAVFA6914E

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) PRESS TOOL & DIES Description : PRESS TOOL & DIES() Specification : PRESS TOOL FOR BASE OF HANDLE S Estab
2) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : AS PER DRG. NO. 6363094 C Estab
3) BEARING LS-11 Description : BEARING LS-11() Specification : BEARING, GEAR WHEEL C Estab
4) BARREL BLANK Description : BARREL BLANK() Specification : REVOLVER BODY MK-III TITANIUM C Estab
5) BOLTS Description : BOLTS() Specification : AS PER DRG. NO. 6349451 C Estab
6) BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. Description : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.() Specification : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN. C Estab
7) BRACKET DRG IWP 1031 Description : BRACKET DRG IWP 1031() Specification : BRACKET DRG IWP 1031 C Estab
8) TOOLS Description : TOOLS() Specification : BROACHING TOOL FOR T-72 SAG CAM S Estab
9) CASE OF FIRING UNIT Description : CASE OF FIRING UNIT() Specification : AS PER DRG. NO. 3053014 C Estab
10) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : CASTLE NUT C Estab
11) COVER CATCH Description : COVER CATCH() Specification : AS PER DRG.NO. 161-712 C Estab
12) PIN Description : PIN() Specification : CYLINDRICAL PINDRG NO. 10277454 C Estab
13) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : DESIGN AND DEVELOPMENT OF FIXTURE R Estab
Category : s
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) FIXTURES, DESIGN & DEVELOPMENT Description : FIXTURES, DESIGN & DEVELOPMENT() Specification : DESIGN AND SUPPLY OF FIXTURE E Estab
2) DIES Description : DIES() Specification : SET OF FORGING DIES FOR T-90 ORD, E Estab
3) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN. Description : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.() Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN. C Estab
4) FABRICATION & MACHINING Description : FABRICATION & MACHINING() Specification : FINISH MACHINING OF LEVER E Estab
5) COVER CATCH Description : COVER CATCH() Specification : FINISH MACHINING REAR CATCH HOLDER E Estab
6) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : FINISH MACHINING OF BALANCE E Estab
7) BRACKET Description : BRACKET() Specification : FINISH MACHINING OF BRACKET C Estab
8) PRE MACHINING OF STOP CARTRIDGE BASE Description : PRE MACHINING OF STOP CARTRIDGE BASE() Specification : FINISH MACHINING OF STOP CARTRIDGE BASE C Estab
9) MACHINING OF COMPONENTS Description : MACHINING OF COMPONENTS() Specification : MACHINING OF STOP C Estab
10) FIXTURES Description : FIXTURES() Specification : FIXTURE FOR FINISH MACHINE EXTRACTOR LOWER E Estab
11) INSULATOR Description : INSULATOR() Specification : INSULATOR ILG-155/DS CAT 5970-002105 C Estab
12) ALL PLASTIC COMPONENTS Description : ALL PLASTIC COMPONENTS() Specification : ITEM C Estab
13) PIN LOCKING PIN FIRING Description : PIN LOCKING PIN FIRING() Specification : LOCKING LUG C Estab
14) BRAKE FLUID Description : BRAKE FLUID() Specification : AS PER SPECIFICATION E Estab
15) CYLINDER Description : CYLINDER() Specification : MACHINING OF FIN CYLINDER C Estab
16) NOZZLE AS PER DRG NO. 2A46-01-05. Description : NOZZLE AS PER DRG NO. 2A46-01-05.() Specification : NOZZLE AS PER DRG NO. 2A46-01-05. C Estab
17) INSULATORS/PLUGS/LOCK/BUSHING MATERIALS Description : INSULATORS/PLUGS/LOCK/BUSHING MATERIALS() Specification : OIL PLUG DRG. NO. 10356154 C Estab
18) PIN Description : PIN() Specification : PARALLEL PIN N4-13-10X30 C Estab
19) COVER & PLATE Description : COVER & PLATE() Specification : SECURING PLATE C Estab
20) PLUNGER Description : PLUNGER() Specification : AS PER DRG. NO.5340-015739IFL-7662 C Estab
21) PRESS TOOL & DIES Description : PRESS TOOL & DIES() Specification : PRESS TOOLS FOR EXTRACTOR UPPER AND LOWER S Estab
22) ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING Description : ALL TYPES OF HELICAL COMPRESSION, EXTENSION AND TORSION SPRING() Specification : RETAINER HELICAL C Estab
23) MACHINING Description : MACHINING() Specification : DISC C Estab
24) ARM (155mm FH Gun) Description : ARM (155mm FH Gun)() Specification : SET OF BROACH FORM COMPONENT ARM C Estab
25) SAFETY CATCH FIRING MECH ASSY Description : SAFETY CATCH FIRING MECH ASSY() Specification : SAFETY CATCH AS PER DRG.NO. 176-8148 C Estab
26) SCREW Description : SCREW() Specification : STOP SCREW DRG NO. 155/COMP.-5/181 C Estab
27) PRESSED MACHINED TOOLS & FIXTURES Description : PRESSED MACHINED TOOLS & FIXTURES() Specification : DESIGN AND DEVELOPMENT OF PRESS C Estab
28) MANUFACTURING OF COMPONENTS Description : MANUFACTURING OF COMPONENTS() Specification : SET OF BROACH FOR COMPONENT PRESSURE C Estab
29) HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS) Description : HSS CUTTING TOOLS (RADIUS CUTTERS, MILLING CUTTERS, T SLOT CUTTERS, LUGGED AND BRAZED TYPE TOOLS)() Specification : SPLINE OF MILLING IN MACHINING INPUR S Estab
30) SPRING Description : SPRING() Specification : AS PER DRG.NO.161-491 C Estab
31) WASHER Description : WASHER() Specification : N5-35-12X16 C Estab
32) NUT, BOLTS, WASHERS Description : NUT, BOLTS, WASHERS() Specification : AS PER FGK REQUIREMENT C Estab
33) FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE Description : FINISH MACHINING OF VARIOUS COMPONENTS INVOLVING PRECISION MACHINING AND SUBASSEMBIES, SSEMBLIES THE() Specification : AS PER DRG. C Estab
Category : s
Grade : 3
Size : S
3977 BALLABH TEXTILES WVG. & MFG.CO.
9A, POPULAR MARKET, GANDHIBAG, NAGPUR MAHARASHTRA
PIN1 : 440002
Phone No. : 0712-2762128 		AAQPM9040A

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CLOTH ACRYLIC RAYON GR A & B Description : CLOTH ACRYLIC RAYON GR A & B() Specification : IND/ME/973(A) 2016 GRADE B DC 6009-ME Dt.03-02-2017 (1.15 METRES WIDTH) R Estab
Category : s
Grade : 3
Size : S
3978 METDERM TREAT
15, MERCHANT INDUSTRIAL ESTATE NO.-1 WALIVE, VASI(EAST) THANE MAHARASHATRA
PIN1 : 401208
Phone No. : 90250-4860116 		AFTOM2519Q

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC Description : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC() Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC R Estab
Category : p
Grade : 3
Size : S
3979 JAIPUR STEEL STRIPS PVT. LTD.
E-776, ROAD NO-13 VISWAKARMA INDUSTRIAL AREA JAIPUR RAJASTHAN
PIN1 : 302013
Phone No. : 0512-2295042 		AAACJ6228L

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST STRIP FOR LMG Description : ST STRIP FOR LMG() Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). C Estab
2) STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH Description : STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH() Specification : SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. C Estab
Category : p
Grade : 3
Size : S
3980 POOJA AGENCEY
703, NAPIER TOWN, NEAR 4TH BRIDGE, DR. CHARI RD. JABALPUR MADHYA PRADESH
PIN1 : 482001
Phone No. : 07612743368 		482001P009

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STARCH LF 1001730820 Description : STARCH LF 1001730820() Specification : STARCH GR II AMMUNITION TO SPECN :IND/ME/459 (C) 2496-ME DT 4-2-84. R Estab
2) SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138 Description : SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138() Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6) R Estab
3) COPPER NAPHTHENATE (1004090800) Description : COPPER NAPHTHENATE (1004090800)() Specification : COPPER NAPHTHENATE TO SPECN IS 1078-1987 (SECOND REVISION) R Estab
4) COPPER CLAD GLASS EPOXY LF 9911349185 Description : COPPER CLAD GLASS EPOXY LF 9911349185() Specification : GLASS EPOXY COPPER CLAD CFG-6 OR ALTERNATIVELY GRADE THICK- NESS 0.9 + 0.2/- 0.1MM (35 MICRON COPPER FOIL ON BOTH SIDEOF THE LAMINATE) SHEET OF SIZE 4' X 3'. R Estab
5) LABEL BRASS 450KG ARDE 2122 DET 34 LF 9911356451 Description : LABEL BRASS 450KG ARDE 2122 DET 34 LF 9911356451() Specification : BRASS LABEL TO DRG. NO. ARDE-2122 DET-34 R Estab
6) PACKING FITMENTS LF 9911356664 Description : PACKING FITMENTS LF 9911356664() Specification : PACKING FITMENTS CONSISTING OF ONE NO.EACH OF THE FOLLOWING:1.BOTTOM TO DRG. PT. NO: ISV-1976 DC-36073-A DT 31/01/96.2.TOP TO DRG. PT. NO. : ISV-1975 DC-36073-A DT 31/01/96. R Estab
7) LABEL BRASS ARDE 9501 01 FOR 250KG LF 9911356814 Description : LABEL BRASS ARDE 9501 01 FOR 250KG LF 9911356814() Specification : BRASS LABEL TO DRG. NO. ARDE-9501-01 (ISS-1) DET-15 R.NO.1 DT.19-9-2000. R Estab
8) LABLE BRASS LF 9911357492 Description : LABLE BRASS LF 9911357492() Specification : 1000 LBS HE N & E ARM 1482 R Estab
9) LABEL BRASS FOR BOMB LBS LF 9911358016 Description : LABEL BRASS FOR BOMB LBS LF 9911358016() Specification : BRASS LABEL FOR BOMB 1000LBS LOW CHARGE (NE & TE) VERSION TO DRG.NO. ARM-1481 B-3 R Estab
10) BRASS LABEL FOR BOMB LBS MK 11 RDZ LF 9911358217 Description : BRASS LABEL FOR BOMB LBS MK 11 RDZ LF 9911358217() Specification : LABEL BRASS FOR BOMB LBS MK 11 RDZ WITH REDUCED NEQ(NE&TE) TO DRG NO: khs-210307. R Estab
Category : p
Grade : 3
Size : S