List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
4021 Mega Fibre Pvt Ltd
S164 MIDC Bhosari Bhosari Pune Maharashtra
PIN1 : 411026
Phone No. : 27121272
GSTIN : 27AABCM1598B1ZM 		PNEM09974G

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 9911844267 CAPCELL CR POLY FOAM 90X30X6[99]() Specification : AS PER SPECIFICATION R Nonestab
2) 9911842608 CR LINK POLY FOAM 140X28X6MM[99]() Specification : AS PER SPECIFICATION R Nonestab
3) 9911843236 CAPCELL WITH ADHESIVE 90X90X18[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) RESIN E4[10]() Specification : TYPE CNSL BASED EPOXY RESIN, COLOUR & APPEARANCE - AMBER COLOUR, CLEAR VISCOUS LIQUID, DENSITY AT 25 DEG. CEL 1.062 g/ml, VISCOSITY AT 25 DEG. CEL. 17120 cps, EPOXIDE EQUIVALENT 330+ 35 R Estab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FRP BOX FOR RGB-12[65]() Specification : DRG. NO. ODC/AFK-096-15 C Nonestab
2) FRP BOX FOR RGB-60[65]() Specification : DRG. NO. ODC/AFK-086-15 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PIECES PKG.BOTTOM 455X145X20MM[21]() Specification : AS PER SPECN. C Nonestab
2) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 265 MM X 146 MM X 12 MM[21]() Specification : IS:4671-1984 C Nonestab
3) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM[21]() Specification : IS:4671-1984 C Nonestab
4) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM[21]() Specification : IS:4671-1984 C Nonestab
5) POLYSTRENE FOAM TYPE2, 275X142X6MM[21]() Specification : IS:4671-1984 C Nonestab
6) PIECE PKG. POLYSTRINE 250X170X12MM[21]() Specification : IS:4671_1984 C Nonestab
7) PIECE PKG. POLYSTERINE 240X110X15[21]() Specification : IS:4671_1984 C Nonestab
8) PIECES PKG.OF MAT.EXP.POLY.FOAM[21]() Specification : IS:4671-1984 C Nonestab
9) SEPERATOR OF POLY.FOAM 278X190X6MMT[21]() Specification : IS-4671-1984 C Nonestab
10) END PKG PIECE 230X335X20MM POLYSTYRENE FOAM[21]() Specification : IS:4671-1984 C Nonestab
11) PIC PKG TOP 460mmx175mmx20mm THICK[21]() Specification : MATERIAL EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG PER CUBIC METRE. C Nonestab
12) BOTTOM & TOP PKG. PIECE OF EXP.POLY[21]() Specification : IS: 4671-1984 C Nonestab
13) END PKG.PIECE-II OF EXPANDED POLY.[21]() Specification : IS 4671-1984 C Nonestab
14) PKG. PIECES MIDDLE 130 X120 X6 MM[21]() Specification : IS :4671_1984(FIRST REVISION) TYPE-2 C Nonestab
15) PIECE PKG.END POLYSTE. 170X14015MM[21]() Specification : IS:4671_1984(FIRST REVISION)TYPE-2 . ( REAFFIRMED 2004 ) C Nonestab
16) DISC II POLYSTYRENE 42MM X DIA 10MM[21]() Specification : DRG NO ARDE 1849 DET NO 10 DT. 28-2-79 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FLEXIBLE LOAD BEARING POLYURE.FOAM[21]() Specification : IS: 8255 - 1976 C Nonestab
Category : p
Grade : Grade III
Size : S
4022 STEEL ARTS(INDIA) PVT.LTD.
23/F-12 JAGAI PURWA, NEAR SURSA MANDIR,KANPUR-208007 KANPUR UTTAR PRADESH
PIN1 : 208007
Phone No. : 9793020055
GSTIN : 09AAECS8638P1ZF 		AAECS8638P

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) ALIGNMENT BRACKET Description : ALIGNMENT BRACKET() Specification : AS PER DRG. NO. SK-00868 C Estab
2) AXIS CYLINDER NIRBHEEK Description : AXIS CYLINDER NIRBHEEK() Specification : AXIS CYLINDER NIRBHEEK C Estab
3) AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302 Description : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302() Specification : AXIS CYLINDER DRG.NO-PH-3/2 & FGK DRG NO.32-0302(IN FINISH C SPECN BS 970 PT.1:1983 GRADE 080 M40 C Estab
4) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
5) BUSHING Description : BUSHING() Specification : AS PER DRG.NO. 115-000208 C Estab
6) Cam Cylinder Description : Cam Cylinder() Specification : Rev Comp.Drg. No.-32-0104 C Estab
7) Catch Hammer Description : Catch Hammer() Specification : Rev Comp.Drg. No.- SK-01289 C Estab
8) COVER & PLATE Description : COVER & PLATE() Specification : AS PER DRG. NO. 1015-004616 C Estab
9) CYLINDER Description : CYLINDER() Specification : AS PER DRG. NO. SK-01444 C Estab
10) CYLINDER SUB ASSY DRG.NO.32-0400. ALONGWITH ASSY.COMPONENTS DRG.NO.32-0401 Description : CYLINDER SUB ASSY DRG.NO.32-0400. ALONGWITH ASSY.COMPONENTS DRG.NO.32-0401() Specification : PROVIDE"TEST PIECE AS PER RELEVENT I.S.FOR MECH. TEST AT FGK C Estab
11) Extractor Description : Extractor() Specification : As per FGK Drg.32-1001 C Estab
12) MACHINING Description : MACHINING() Specification : FINISH MACHINING OF EYE BOLT/SCREW C Estab
13) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
14) LEVER EXTRACTOR Description : LEVER EXTRACTOR() Specification : FGK DRG. NO. PH-1-7 C Estab
15) LOCKING PLATE 1481M X Description : LOCKING PLATE 1481M X() Specification : LOCKING PLATE AS PER DS CAT NO. 5310-022970 C Estab
16) PAWL Description : PAWL() Specification : DRG NO 32-0102 C Estab
17) PIN CATCH TRIGGER Description : PIN CATCH TRIGGER() Specification : FGK DRG. NO. PH-7-3 C Estab
18) PIN CATCH HAMMER/PIN SWIVEL HAMMER Description : PIN CATCH HAMMER/PIN SWIVEL HAMMER() Specification : AS PER DRG.NO.PH-6-5 C Estab
19) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
20) PLUNGER Description : PLUNGER() Specification : FGK DRG. NO. ILG-153 C Estab
21) REBOUND SLIDE Description : REBOUND SLIDE() Specification : AS PER DRG.NO. 32-0122 MK-III C Estab
22) REBOUND TRIGGER Description : REBOUND TRIGGER() Specification : AS PER DRG. NO. 32-0132 MK-III C Estab
23) RETAINING PIN, FEED Description : RETAINING PIN, FEED() Specification : RETAINER HELICAL C Estab
24) SEMI FINISHED BARREL Description : SEMI FINISHED BARREL() Specification : AS PER DRG. NO. 01445 C Estab
25) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
26) STOP CYLINDER Description : STOP CYLINDER() Specification : DRG NO 32-011 C Estab
27) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
28) TRIGGER TO DRG. NO. 32-0701 MK-III Description : TRIGGER TO DRG. NO. 32-0701 MK-III() Specification : TRIGGER TO DRG. NO. 32-0701 MK-III ALT VERSION 2 MATERIAL: BS 970 Pt.1: 1983 GD. 070 M-55 (BS 970 EN-9)/ALT.MTL.(I.C.)BS3146 PT.-1,1974 TYPE CLASS-8 ALT. MATERIAL FOR MIM COMPONENTS:MIM 4650. C:0.3-0.6%, NI:1.5-2.5%,Cr-0.5% MAX.,Si-0.5%, C Estab
29) WASHER Description : WASHER() Specification : WASHER LOCK AS PER DRG.NO. 5310-001470 C Estab
Category : s
Grade : 3
Size : S
4023 SHIV SHANKARLAL SHIVSARANLAL
31/128 GHUMNI BAZAR KANPUR U P
PIN1 : 208001
Phone No. : 9839123019 		PG9987J1ZF

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ENGINEERS SCREW DRIVER Description : ENGINEERS SCREW DRIVER() Specification : ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY S Estab
Category : s
Grade : 3
Size : S
4024 KRISHNA SAW MILL
4, SETT PUKUR ROAD, KOLKATA WEST BENGAL
PIN1 : 700002
Phone No. : 9830352063 		CALKO8525G

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) WOODEN BEAM SIZE 100 MM X 150 MM X 1000 MM Description : WOODEN BEAM SIZE 100 MM X 150 MM X 1000 MM() Specification : WOODEN BEAM ( SIZE 100 MM X 150 MM X 1000 MM / TYPE : SAL) P Estab
2) WOODEN BEAM Description : WOODEN BEAM() Specification : WOODEN BEAM (SIZE:100 MM X 180MM X2050 MM) P Estab
3) WOODEN BEAM SIZE 180MM X 180 MM X500 MM Description : WOODEN BEAM SIZE 180MM X 180 MM X500 MM() Specification : WOODEN BEAM (SIZE: 180MM X 180 MM X500 MM / TYPE : SAL) P Estab
Category : p
Grade : 2
Size : S
4025 ALPHA INDUSTRIES
39, MODEL TOWN, SONIPAT HARYANA
PIN1 : 131001
Phone No. : 0130-2246921 		AABFA7707R

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) UNIT LOAD FOR CH 8 AND 9 Description : UNIT LOAD FOR CH 8 AND 9() Specification : UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995. R Estab
Category : dp
Grade : 3
Size : S
4026 RAJ PRECISION EQUIPMENT,
25 K.D.A. PLAT.PANKI SITE 1, ON DUNCAN ROAD, KANPUR.-208022 KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 9415726532
GSTIN : 09ABEPY5634P1ZQ 		ABEPY5634P

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Lever Cam Description : Lever Cam() Specification : As per FGK Drg. 32-0103 C Estab
2) MAIN SPRING STRIP Description : MAIN SPRING STRIP() Specification : AS PER DRG.NO. 32-0110 C Estab
3) PAWL Description : PAWL() Specification : DRG NO 32-0102 C Estab
4) PLUNGER Description : PLUNGER() Specification : FGK DRG. NO. PH -1-24 C Estab
5) SAFETY Description : SAFETY() Specification : DRG NO 32-0123R C Estab
6) Shield Description : Shield() Specification : Rev Comp.Drg. No.- SK-01287 C Estab
7) SLEEVES Description : SLEEVES() Specification : AS PER DRG. NO.IFL-7642 DSS CAT 3120-004660 C Estab
8) STUD REBOUND Description : STUD REBOUND() Specification : AS PER DRG. NO. 32-0205 C Estab
9) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Pin Locking Pin Firing in F/D Cond. To DSCAT NO. 5315-010101 Description : Pin Locking Pin Firing in F/D Cond. To DSCAT NO. 5315-010101() Specification : AS PER DRG. C Estab
2) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM Description : PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM() Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1 C Estab
3) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC Description : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Estab
4) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
5) STUD REBOUND IN F/C DRG NO PHMK-III-2-5 FOR REVOLVER MK-III Description : STUD REBOUND IN F/C DRG NO PHMK-III-2-5 FOR REVOLVER MK-III() Specification : STUD REBOUND IN F/C DRG NO PHMK-III-2-5 FOR REVOLVER MK-III C Estab
6) SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23 Description : SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23() Specification : SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 C Estab
Category : p
Grade : 3
Size : S
4027 KAILASH ENTERPRISES
NEAR MARIMATA MANDIR BHUSAWAL MAHARASHTRA
PIN1 : 425201
Phone No. : 9422276199 		2720011284

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BLACK STAMP PAD INK() Specification : JSS-7510-04-2000 REV. NO. 1 MAKE: CAMEL/ KORES R Estab
2) CAMBRIC COTTON 762MM WIDE NO() Specification : IS:5088-1982(1ST REVISION)WITH AMENDMENT NO 2 EXCEPT (1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2)(1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2) NOT EXCEED 0.5% WHEN DETERMINED AS PER SPECN IS- 1967-1961". R Estab
3) CLOTH CAMBRIC (BLEACHED) 762 MM WIDE() Specification : IS:5088-1982 R Estab
4) CLOTH COLLAR WHITE 152.4 CM WIDE, SPECN. JSS:8305-21:2013, REV 3, DC 5205-ME() Specification : JSS:8305-21:2013, REV 3, DC 5205-ME R Estab
5) DOSUTI SCOURED BLEACHED 91CM WIDE,SL. NO IV OF TABLE 1 SPECN IS 179-1977() Specification : IS 179-1977 [SECOND REVISION] REAFFIRMED 2002 WITH AMENDMENT NO. 1 TO 5.WITH AMENDMENT NO. 1 TO 5. R Estab
6) DRILL COTTON BLEACHED WHITE 71 CM W() Specification : SPECN. IS177-1989 (FOURTH REVISION), WITH AMMENDMENT NO.1 & 2, IN CUT LENGTH OF MINIMUM 20 METRES. R Estab
7) BROWN CELLO ADHASIVE TAPE 2" WIDE() Specification : DRG.NO.AFK/SK-2582 SHEET 1 R Estab
8) TAPE COTTON 6 MM WIDE() Specification : IND/ME/888 R Estab
9) LEATHER CHAMOIS GR 2 SIZE 46 CM X 46 CM() Specification : SPECN. IS- 1017 1983 (2ND REVISION) EMENDMENT NO.1 R Estab
Category : p
Grade : 3
Size : S
4028 OM ENTERPRISES
BE-179,STREET NO. 3, HARI NAGAR, NEW DELHI HARI NAGAR NEW DELHI NEW DELHI
PIN1 : 110064
Phone No. : 9971970048 		ANEPV6508M

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) PACKING BOX REVOLVER .32(NIRBHEEK) Description : PACKING BOX REVOLVER .32(NIRBHEEK)() Specification : PACKING BOX REVOLVER .32(NIRBHEEK) C Estab
2) GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III Description : GRIP SUB ASSEMBLY RIGHT & LEFT FOR MK-III() Specification : AS PER DRG. NO. 32-0800 & 32-0900 C Estab
3) NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY Description : NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY() Specification : NIRBHEEK GRIP(R) & GRIP(L) SUB ASSY AS PER DRG. NO. SK01690 C Estab
Category : s
Grade : 3
Size : S
4029 INDUSTRIAL TRADING CORPORATION
33/1, N.S. ROAD, MARSHAL HOUSE ROOM NO. 520 KOLKATA W.B.
PIN1 : 700001
Phone No. : 0512-2217225 		FI4503K1ZF

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL RD 8MM DIA FOR MAG Description : STEEL RD 8MM DIA FOR MAG() Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C R Estab
2) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION Description : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION() Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE. R Estab
3) STEEL RD 19.00MMDIAINHOT ROLLED & NORMALISED CONDITION TO SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE Description : STEEL RD 19.00MMDIAINHOT ROLLED & NORMALISED CONDITION TO SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE() Specification : SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE R Estab
4) STEEL ROUND 20MM DIA Description : STEEL ROUND 20MM DIA() Specification : STEEL ROUND 20MM DIA TO SPECN.BS:970:PT.1:1983 GD.080M40 IN HOT ROLLED &NORMALISED CONDITION. TEST PIECE TO BE TESTED AS PER THE SPECIFICATION. R Estab
5) ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 CB . (FOR BRACKET FRONT HAND GUARD). Description : ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 CB . (FOR BRACKET FRONT HAND GUARD).() Specification : SPECN.IS:5517-1993 DEGIGNATION 40 CB R Estab
6) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE Description : STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE() Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE R Estab
7) STEEL STRIP 3.5MM THICK X 32MM WIDE TO SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION Description : STEEL STRIP 3.5MM THICK X 32MM WIDE TO SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION() Specification : SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION R Estab
8) STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40. Description : STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.() Specification : SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40. R Estab
9) STEEL ROUND 19.05 MM (3/4")DIA IN HOT ROLLED & NORMALISED CONDITION TO SPECN.BS:970 PT-1:1983 GD.605M36 Description : STEEL ROUND 19.05 MM (3/4")DIA IN HOT ROLLED & NORMALISED CONDITION TO SPECN.BS:970 PT-1:1983 GD.605M36() Specification : SPECN.BS:970 PT-1:1983 GD.605M36 R Estab
10) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 Description : ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36() Specification : SPECIFICATION BS:970.PT.1 1983 GD.605M36 R Estab
11) STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614) Description : STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)() Specification : SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29 R Estab
12) STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM) Description : STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM)() Specification : SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 R Estab
13) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C Description : STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C() Specification : SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C.(REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907) R Estab
14) STEEL SQR 37MM FOR MAG Description : STEEL SQR 37MM FOR MAG() Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION R Estab
15) STEEL RD 45MM DIA IN HR AND NORMALISED CONDITION Description : STEEL RD 45MM DIA IN HR AND NORMALISED CONDITION() Specification : SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANNX."C".A SEPERATE TEST PIECES IS TO BE QUENCHED * TEMPERED TO ACHIEVE HARDNESS40-45 HRC. (REQD.FOR-BARREL LOCKING NUT ) R Estab
16) STEEL RD 25MM DIA FOR MAG Description : STEEL RD 25MM DIA FOR MAG() Specification : SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) R Estab
17) ST ROUND 8 MM DIA Description : ST ROUND 8 MM DIA() Specification : ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82 R Estab
18) STEEL FLAT 22X18MM FOR MAG Description : STEEL FLAT 22X18MM FOR MAG() Specification : SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM) R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST ROD 10 MM DIA IN COLD ROLLED and SUB CRITICAL ANNEALED CONDITION Description : ST ROD 10 MM DIA IN COLD ROLLED and SUB CRITICAL ANNEALED CONDITION() Specification : ST.ROD 10 MM DIA IN COLD ROLLED & SUB CRITICAL ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983:GD.070M20.NMIR & MACRO ETCH TEST TO BE CARRIED OUT AS PER ANNEXURE`A'NATURE `C'ATTACHED. R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL RD 45MM DIA IN HOT ROLLED AND ANNELED CONDITION FOR MAG Description : STEEL RD 45MM DIA IN HOT ROLLED AND ANNELED CONDITION FOR MAG() Specification : SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB. R Estab
Category : s
Grade : 3
Size : S
4030 HOWRAH CHEMICAL WORKS
148, MAHATMA GANDHI ROAD KOLKATA WEST BENGAL
PIN1 : 700007
Phone No. : 9831068490
GSTIN : 19AACFH7515D1ZK 		CALH00420A

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SODIUM AZIDE Description : SODIUM AZIDE() Specification : SODIUM AZIDE TO JSS-6810-79:2016, REV-2 DCI 6049-ME ,DTD.08.06.17. R Estab
2) SODIUM ALUMINIUM FLUORIDE (CRYOLITE) Description : SODIUM ALUMINIUM FLUORIDE (CRYOLITE)() Specification : SODIUM ALUMINIUM FLUORIDE (CRYOLITE) TO JSS-6810-73-2010 REV-2. R Estab
3) MINERAL JELLY TO JSS-8030-09:2010 Description : MINERAL JELLY TO JSS-8030-09:2010() Specification : MINERAL JELLY TO JSS-8030-09:2010, REV-2 DC-5011-ME DTD.14.02.11 R Estab
Category : p
Grade : 3
Size : S
4031 S.S.M. BROTHERS LTD.,
POST BOX No. 8, 11-D, GANDHIPURAM MAIN ROAD, KOMARAPALAYAM, NAMAKKAL, TAMIL NADU
PIN1 : 638183
Phone No. : 04288-260815 		AACCS9495C

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED Description : CAMBRIC COTTON DYED & UNDYED() Specification : IS 5088-1982 (REV.1) WITH AMENDMENT No. 2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY No. 2) R Estab
2) THREAD SEWING UNBLEACHED Description : THREAD SEWING UNBLEACHED() Specification : THREAD COTTON SEWING UNBLEACHED UNPROOFED 27 TEX X 9 (COPS OF 1000 MTRS. JSS:8310-02 2016 REVISION NO.3 DC 5497-ME DT.24.09.2016 R Estab
3) WHITE COLOUR COTTON DOWN TIGHT Description : WHITE COLOUR COTTON DOWN TIGHT() Specification : CLOTH COTTON DOWN TIGHT (WHITE COLOUR) SPECN :IND/ME/1005 october 2012 DC - 5105 ME 27/04/2013 WIDTH : 1400 MM. R Estab
4) CALICO BAGS 40 KG Description : CALICO BAGS 40 KG() Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH R Estab
5) TAPE COTTON WHITE Description : TAPE COTTON WHITE() Specification : TAPE COTTON WHITE UN-PROOFED FOR AMMUNITION PURPOSES 6 MM + OR -1.5MM WIDE SPECN:IND/ME/888:2015 DC-5405(ME) DT.01.02.2016 R Estab
6) CORD RAYON Description : CORD RAYON() Specification : CORD RAYON WITH BREAKING LOAD 343 N SPECIFICATION :IND/ME/761(B) DC 3754-ME DT.12.12.2002 R Estab
7) TAPE COTTON WHITE 30 MM Description : TAPE COTTON WHITE 30 MM() Specification : TAPE COTTON MEDIUM UNPROOFED SPECN : IND/ME/888:2015 DC 5405-ME DT.01-02-16 (COLOURWHITE , WIDTH : 30MM) R Estab
Category : dp
Grade : 3
Size : S
4032 ELOQUENT ENGG. WORKS
204, GANJ PETH, MOMINPURA, CHOTTI MASJID PUNE MAHARASHTRA
PIN1 : 411042
Phone No. : 912026456756 		ACQPS5725G

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM STRIP 0.46+0.04MM-0.05MM X34.3MM() Specification : IS 737-2008 (4TH REVISION) GRADE 19000 R Estab
2) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV)() Specification : DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011 R Estab
3) CONTACT TO DRG.ARDE 2078/31.27.8.87() Specification : ARDE/SPECN/415-(b) dt. 20.10.93 PARA 1 TO 2O. R Estab
Category : p
Grade : 3
Size : S
4033 CHOKSEY CHEMICALS PVT LTD
111 Industrial Area Next to croma showroom Sion GTB Station road mumbai Maharashtra
PIN1 : 400022
Phone No. : 49100100
GSTIN : 27AAACC6303K1ZT 		MUMC1104IC

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) SEALANT YT-32 AS PER SPCN NO. TY:38.105.462-80 (LF-9927076729)[99]() Specification : TY:38.105.462-80 R Estab
Category : p
Grade : Grade III
Size : S
4034 KALIMATI CARBON PVT. LTD.
10C, MIDDLETON ROW, 7TH FLOOR KOLKATA WEST BENGAL
PIN1 : 700071
Phone No. : 033-22640043 		CALK08664F

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) ACTIVATED CARBON (CHARCOAL) Description : ACTIVATED CARBON (CHARCOAL)() Specification : ACTIVATED CARBON,COLUMN SIZE: 8-25 BSS P Estab
Category : p
Grade : 3
Size : S
4035 THEIS PRECISION STEEL INDIA PRIVATE LIMITED
OPP:GIDC, N.H.NO.8, P.O: KABILPORE, NAVSARI N.H.NO.8 NAVSARI GUJARAT
PIN1 : 396424
Phone No. : 09227949744 		SRTT00997D

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) HOUSING BODY OF GHAATAK AND INSAS Description : HOUSING BODY OF GHAATAK AND INSAS() Specification : STEEL STRIP 1.8MM +_.055X 270MM +_ 0.2 WIDTH TO SPCN.IS:7226 -1974, GRADE C40 SPCL. CONTROL/TREATMENT TO SUIT REQUIRED SILICON/ALUMINIUM KILLED WITH ALUMINIUM CONTENT 0.01%(MAX).DEPTH OF DECARBURISATION WITHIN 3% ON THICKNESS/SIDES SPHER- R Estab
Category : p
Grade : 3
Size : L
4036 RAHUL ENTERPRISES
3605, FCA GALI NO 10, S.G.M. NAGAR, FARIDABAD S.G.M. NAGAR FARIDABAD HARYANA
PIN1 : 121001
Phone No. : 9818189156 		ABBPP0541M

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD PUMP ACTION GUN Description : DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD PUMP ACTION GUN() Specification : DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD. PAG. R Estab
Category : p
Grade : 3
Size : S
4037 SRI KONARK INDUSTRIES
H.NO. 5-5-35/100, IST FLOOR, PRASHANTH NAGAR,KUKATPALLY, HYDERABAD- 500072 ANDHRA PRADESH
PIN1 : 500072
Phone No. : 9505458485 		ACUPP4392G

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) HAMMER TO DRG. NO. 32-0601 MK-III Description : HAMMER TO DRG. NO. 32-0601 MK-III() Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A. C Estab
Category : s
Grade : 3
Size : S
4038 NATIONAL INDUSTRIES
123/54 SARESH BAGH KANPUR U.P.
PIN1 : 208012
Phone No. : 7860037121 		AAAMPD7969

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 0.9MM (20SWG) Description : STEEL SHEET 0.9MM (20SWG)() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2., C Estab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
3) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. C Estab
4) SPRING STEEL WIRE FOR CARBINE 5 56 Description : SPRING STEEL WIRE FOR CARBINE 5 56() Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2 C Estab
5) Steel Forging Block Gas Description : Steel Forging Block Gas() Specification : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 C Estab
6) 21. Steel blank for flash eliminator Drg. No. SK-5216*1 Description : 21. Steel blank for flash eliminator Drg. No. SK-5216*1() Specification : AS PER DRG. C Estab
7) STEEL FORGING BLOCK REAR FOR LMG 5 56 Description : STEEL FORGING BLOCK REAR FOR LMG 5 56() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Estab
8) Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17 Description : Steel Forging Block Gas Drg No. MS-330 * D.A. No. 7/17() Specification : AS PER DRG. C Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION C Estab
10) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
11) STEEL FORGING BREECH BLOCK SLIDE FOR MAG Description : STEEL FORGING BREECH BLOCK SLIDE FOR MAG() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Estab
12) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
13) Body Trigger for MAG Description : Body Trigger for MAG() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Estab
14) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
15) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING R Estab
16) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
17) Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K Description : Rivet Flat Head Phosphated Class II Oil Finish Drg no.-SK 3543K() Specification : AS PER DRG. C Estab
18) PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM Description : PIN STRAIGHT HEADED STOP SIDE GRANADE FOR INSAS 5.56MM() Specification : ARDE SK 3143/42 C Estab
19) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
20) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
21) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
22) Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm Description : Dovetail drg .no. ARDE SK-3143/66 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
23) 2.RING RETAINING Description : 2.RING RETAINING() Specification : AS PER DRAWING C Estab
24) Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM Description : Wheel Lock IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM. C Estab
25) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
26) LEVER PIN LOCKING Drg. No SK 3143-31/1 Description : LEVER PIN LOCKING Drg. No SK 3143-31/1() Specification : AS PER DRG C Estab
27) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
28) SPRING HELICAL COMPRESSION FOR MAG Description : SPRING HELICAL COMPRESSION FOR MAG() Specification : DS CAT NO.5360-000536 DC(I) NO. 26204-SA DT.23-05-06 C Estab
29) PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5 Description : PLUG GAS CYLINDER TO DS CAT NO. 1005-007749 R5() Specification : AS PER DRG. C Estab
30) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
31) SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM Description : SCREW EXT. RELIEVED BODY GRIP PISTOL FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/120 C Estab
32) SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM Description : SCREW SHOULDER FRONT SLING LOOP FOR INSAS 5.56 MM() Specification : ARDE SK 2689/158 C Estab
33) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56 Description : SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
34) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
35) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
36) Pin for Pin Safety in finished condition of Striker Mechanism Description : Pin for Pin Safety in finished condition of Striker Mechanism() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Estab
37) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
38) MULTI TOOTH LOCK WASHER Description : MULTI TOOTH LOCK WASHER() Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED. C Estab
39) Firing Attachment Blank ammunition DSCAT No.1005-007847 Description : Firing Attachment Blank ammunition DSCAT No.1005-007847() Specification : AS PER DRG. C Estab
40) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016 C Estab
41) Plunger Cocking Handle ARDE-657/223 Description : Plunger Cocking Handle ARDE-657/223() Specification : As Per Drg. C Estab
42) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
43) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
44) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
45) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
46) SPRINGS COMPONENTS FOR SMALL ARMS Description : SPRINGS COMPONENTS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
47) RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR COVER & DOVETAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) Bracket Description : Bracket() Specification : AS PER DRG. C Estab
49) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
50) SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL COMPRESSION EXTRACTOR OUTER FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10 C Estab
51) PACKING ONLY Description : PACKING ONLY() Specification : AS PER DRG/SPEC. C Estab
52) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
53) RETAINER FOR INSAS 5.56 MM Description : RETAINER FOR INSAS 5.56 MM() Specification : ARDE/SK-2689/90 C Estab
54) CATCH MAGAZINE FOR INSAS 5.56 MM Description : CATCH MAGAZINE FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
55) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56 Description : SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56() Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16 C Estab
56) Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186 Description : Pin Grooved Headed for Trigger & safety Sear To DS CAT no. 5315-009186() Specification : AS PER DRG. C Estab
57) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition Description : Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition() Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK) TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789 C Estab
58) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
59) PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM Description : PLUNGER MULTI APPLICATION FOR INSAS 5.56 MM() Specification : AS PER DRAWING C Estab
60) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
61) Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812 Description : Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812() Specification : DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16. C Estab
62) CASE MAGAZINE FOR SMALL ARMS Description : CASE MAGAZINE FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
63) ALL TYPE OF PINS FOR AMOGH 5.56 MM Description : ALL TYPE OF PINS FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
64) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
65) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM Description : STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
66) PIN AUTO SEAR FOR JVPC Description : PIN AUTO SEAR FOR JVPC() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA C Estab
67) MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 Description : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08() Specification : MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08 C Estab
68) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
69) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III() Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III C Estab
70) LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 Description : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99() Specification : LEVER AUXILIARY TO DRG NO. PH-1-8 IN FINISHED CONDITION. D.A. NO. 67/99 DT. 15.5.99 C Estab
71) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 Description : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Estab
72) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER Description : SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER() Specification : SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 C Estab
73) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
74) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III() Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N C Estab
75) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
76) SPLIT COLLAR GAS REGULATOR FOR MAG Description : SPLIT COLLAR GAS REGULATOR FOR MAG() Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. C Estab
77) 6.PIVOT COVER LATCHES SPRING Description : 6.PIVOT COVER LATCHES SPRING() Specification : DS CAT NO. 1005-000463 C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
81) EXTRACTOR SPRING MAG 7.62MM Description : EXTRACTOR SPRING MAG 7.62MM() Specification : EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION., C Estab
82) PIN RETAINING HANDLE COCKING SLIDE for MAG Description : PIN RETAINING HANDLE COCKING SLIDE for MAG() Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
83) SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) Description : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT)() Specification : SPINDLE, HANDLE TO DS CAT NO. 1005-006619 DC NO. 25317-SA DT- 03/04/2002 IN SOFT CONDITION (WITHOUT HEAT TREATMENT) C Estab
84) REAR END OUTER TUBE RETURN SPRING FOR MAG Description : REAR END OUTER TUBE RETURN SPRING FOR MAG() Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
85) REXINE SYNTHETIC POUCH FOR REVOLVER Description : REXINE SYNTHETIC POUCH FOR REVOLVER() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
86) BAG TOOL SATCHEL Description : BAG TOOL SATCHEL() Specification : BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010. C Estab
87) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Estab
88) BRUSH CLEANING for MAG Description : BRUSH CLEANING for MAG() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Estab
89) SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 Description : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750() Specification : SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750 C Estab
90) SCREW CAP SOCKET HEAD FOR MAG Description : SCREW CAP SOCKET HEAD FOR MAG() Specification : DS CAT NO.5305-004289 DC(I) NO.19777-SA DT.13-10-87 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
4039 UNITED BLEACHERS (P) LIMITED
POST BOX No. 12, NELLITHURAI ROAD, METTUPALAYAM, COIMBATORE DISTRICT, TAMIL NADU
PIN1 : 641301
Phone No. : 04254-222914 		AAACU3750G

Download 		1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED Description : CAMBRIC COTTON DYED & UNDYED() Specification : IS 5088-1982 (FIRST REVISION) WITH AMENDMENT No. 2 REAFFIRMED 2011 DC 3999-ME Dt.08-01-2010 (VARIETY No. 2) R Estab
Category : p
Grade : 3
Size : S
4040 STARLINE INDUSTRIES,
10, CLIVE ROW, 2ND FLOOR, ROOM NO.6/3, KOLKATA-700 001. 2ND FLOOR, ROOM NO. 6/3 KOLKATA WEST BENGAL
PIN1 : 700001
Phone No. : 033-22428712 		ACVPA3271C

Download 		1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BUSH STUD HAMMER Description : BUSH STUD HAMMER() Specification : FGK DRG. NO. PH-5-3 C Estab
2) Lever Cam Description : Lever Cam() Specification : As per FGK Drg. 32-0103 C Estab
3) NUT EXTRACTOR Description : NUT EXTRACTOR() Specification : FGK DRG. NO. PH -4-2 C Estab
4) AXIS CYLINDER Description : AXIS CYLINDER() Specification : PIN AXIS CYLINDER AS PER FGK DRG. NO. 32-0303 C Estab
5) PIN CATCH TRIGGER Description : PIN CATCH TRIGGER() Specification : FGK DRG. NO. PH-7-3 C Estab
6) PIN CATCH PIN SWIVEL HAMMER Description : PIN CATCH PIN SWIVEL HAMMER() Specification : FGK DRG. NO. PH -6-5 C Estab
7) PIN EXTRACTOR Description : PIN EXTRACTOR() Specification : FGK DRG. NO. PH-10-2 C Estab
8) PIN FIXING BARREL Description : PIN FIXING BARREL() Specification : FGK DRG. NO. 32-0109 C Estab
9) SCREW CAM Description : SCREW CAM() Specification : FGK DRG. NO. PH-1/28 C Estab
10) SCREW CATCH BARREL Description : SCREW CATCH BARREL() Specification : FGK DRG. NO. SK-01470 C Estab
11) SCREW FIXING LEVER CAM Description : SCREW FIXING LEVER CAM() Specification : FGK DRG. NO. PH -1-20 C Estab
12) SCREW PIN FIXING BARREL Description : SCREW PIN FIXING BARREL() Specification : AS PER DRG. NO. 32-0117 C Estab
13) SCREW PLATE BODY Description : SCREW PLATE BODY() Specification : FGK DRG. NO. PH-1-19/32-0119 C Estab
14) SCREW PLUNGER Description : SCREW PLUNGER() Specification : FGK DRG. NO. PH-1-26 C Estab
15) SCREW SHIELD Description : SCREW SHIELD() Specification : FGK DRG. NO. PH-1-16 C Estab
16) SCREW STOCK Description : SCREW STOCK() Specification : FGK DRG. NO. PH -1-15 C Estab
17) STUD STOP CYLINDER Description : STUD STOP CYLINDER() Specification : FGK DRG. NO. PH PH-2-2 C Estab
18) SWIVEL BUTT SUB ASSEMBLY Description : SWIVEL BUTT SUB ASSEMBLY() Specification : AS PER DRG. NO. 32-1100 C Estab
Category : s
Grade : 3
Size : S