List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3461 PUNIT ENTERPRISES
30/17, D-2 BLOCK, MIDC CHINCHWAD, PUNE-411019 MIDC CHINCHWAD PUNE Maharashtra
PIN1 : 411019
Phone No. : 9822033017
GSTIN : 27AASPG6786H1Z0 		PNEUO5299A

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CYLINDER POLYTHENE FOR FOG SIGNAL[64]() Specification : OFDR/CARTG-84/R-3/A3 C Estab
2) Heat Shrink Tube for Shell 155mm Illg. M1A1[63]() Specification : [DRG. NO. 2440A03096] C Estab
3) RUBBER RING FOR MORTAR BOMB 81MM ILLG 2A[62]() Specification : CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134] C Nonestab
4) CUP PLASTIC FOR 81MM ILLG MK-II[62]() Specification : DRG NO ARDE 2222 DET 10 PT NO ITV 262 SPECN. NO. CQA (A) 2345 (C) C Estab
5) SPRING HOLDER FOR 81MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 7 PT NO ITV 258 SPECN: NO. CQA(A) 2345(C) C Estab
6) RUBBER WASHER FOR 105 MM ILLG.[62]() Specification : DRG.ARDE 9769 DET NO 18 PART NO.ISX 432 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) O RING FOR MORTAR BOMB 81MM ILLG 2A[62]() Specification : CQA(A) 2345 (C) [DRG. NO. ARDE 2222, DET 6, PART NO ITV 263] C Nonestab
2) CUP HDPE FOR SHELL 84MM ILLG.[62]() Specification : F-1301-56251-A C Estab
3) CARRIER AMMN 17A FOR 81MM ILLG. MK-II[62]() Specification : DRG.NO ARDE 2224 PT NO ISV 551A SHEET NO.3 SPECN. NO. CQA(A) 2804 (M) C Nonestab
4) HALF CUP FOR BOMB 81 MM ILLG. MK-II[62]() Specification : DRG NO.ARDE 2224 DET NO.5 PT NO. ISV 1930 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TRANSIT PLUG FOR SHELL 84 mm ILLG.[62]() Specification : CIA/AMMN/2220 C Estab
2) SET OF COMPONENTS FOR SIGNAL DISTRESS D/N 1 MK IN[64]() Specification : DRG. NOS. NAD-8611/38, 40, 37, 39, 27, 29, 2 AND 36 (TOTAL EIGHT) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) OUTER TUBE FOR PARA FLARE RED [61]() Specification : DRG.NO. OFDR/CT/34M/ U-I/A4 C Estab
2) VENTURY ASSEMBLY FOR PARA FLARE RED[62]() Specification : DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98) C Estab
3) BURSTER TUBE (STEEL) FOR PARA FLARE RED[62]() Specification : DRG.NO.OFDR/CT /19/ UI/A-4 (AMENDMENT NO.88 DT.9-5-98) C Estab
4) BASE YELLOW FOR PARA FLARE RED[61]() Specification : DRG NO.OFDR/CT/30/M/A-2. DATED 05/11/1996 C Nonestab
5) BOTTOM SAFETY COVER PARA FLARE RED[61]() Specification : DRG NO.OFDR/CT/41/M/UI/A-3 C Estab
6) SUPPORT FOR PARA FLARE RED[62]() Specification : DRG NO OFDR/CT/17/UI/A4 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CAP TOP CLOSING FOR HAND FLARE[64]() Specification : DRG.NO.OFDR/CT/1/12/A3 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) POLY PROPYLENE DISC FOR 51MM SMOKE[62]() Specification : DRG. NO.CQA(A)/AMN/2868 PT.NO.ITV 252 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PARACHUTE HOUSING FOR 51 MM ILLG.[62]() Specification : DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) RUBBER WASHER FOR 51MM ILLG.[62]() Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SPOOL COMPLETE (ITEM NO. 18) POLY MOULDING FOR FTW[64]() Specification : DRG. NO. DD(L) 13461-A/1 C Estab
2) AMMUNITION CONTAINER 75A (ASSY)[65]() Specification : DRG. NO. CQA/AMN/3259 PART NO. ISV 583A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Obturator for Shell 155mm Illg M1A1[63]() Specification : [DRG. NO. 155-1140] C Estab
2) Scuff Protector for Shell 155mm Illg M1A1[63]() Specification : [DRG. NO. 155-1110] C Estab
3) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1[63]() Specification : DRG. NO. 155-1120 C Estab
4) Protector, Spilt half, drogue( HDPE) for Shell 155 mm Illg M1A1[63]() Specification : DRG.NO. 2440A03092 C Estab
5) Protector, Top drogue (HDPE Type-2) for Shell 155 mm Illg M1A1[63]() Specification : DRG.NO. 2440A03093 C Estab
6) SPACER[63]() Specification : SPACER TO DRG.NO. 2439A00016 DC 36552A DATED 24.4.99.MATL ACRYLONITRILE BUTADIENE RUBBER COMPOUND GRADE "D" [TO SPECN.NO.IND/ME/914(PROV). DC 3496ME DTD. 6/2/98. E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PLAQUE PLASTIC LARGE DRG NO 155 1190 HDPE TO SPECN JSS 9330 03 1995 TYPE 2[63]() Specification : SPECN JSS 9330 03 1995 TYPE 2 C Estab
2) PLAQUE PLASTIC SMALL DRG NO 155 1200 HDPE TO SPECN JSS 9330 03 1995 TYPE 2[63]() Specification : SPECN JSS 9330 03 1995 TYPE 2 C Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BASE CAP (BLACK) FOR PROJECTILE() Specification : DRG. NO. AFK/PJ/SK-62/1 R Estab
2) PLUG TO DRG NO KF SK 1746() Specification : SPECN. NO. DGOF 135 (a) DT. 15.11.19 R Estab
3) CHARGE HOLDER TO DRG.NO.KF/SK-1746() Specification : DGOF 135 R Estab
4) PLUG FUZE HOLE, 35 MM NO. 6 AS PER DRG. NO. CIA/AMN/2125 PART NO. ITV 95() Specification : DRG. NO. CIA/AMN/2125 PART NO. ITV 95 R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1[60]() Specification : DRG. NO. AFK/SK-2888 C Nonestab
2) PLASTIC INDEX DISC-SHOT NO.6[60]() Specification : DRG.NO.AFK/SK-2888.DT. 17.01.2007SHT.1 C Nonestab
3) PLASTIC INDEX DISC-SHOT NO.BB[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
4) PLASTIC INDEX DISC-SHOT NO.8[60]() Specification : DRG NO. AFK/SK-2888 DT.04.05.2002 C Nonestab
5) PLASTIC INDEX DISC-SHOT NO.4 No[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
6) PLASTIC INDEX DISC-SHOT NO.7[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
7) PLASTIC INDEX DISC-SHOT NO.9[60]() Specification : DRG.NO.AFK/SK-2888 DT.11.01.2007 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]() Specification : NASK 856 (PROVISIONAL) C Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]() Specification : DRG. NO. ERDL,1164 DET. 2 C Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
5) BRIDGED SQUIB[60]() Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98 C Nonestab
6) SQUIB (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 C Nonestab
7) SQUIB HOLDER DRG.NO. AFK/SK-334-06][60]() Specification : DRG. NO. AFK/SK-334-06 R Nonestab
8) SQUIB HOLDER - DRG.NO. AK/SK-303-05[60]() Specification : DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.27.11.2014 C Nonestab
9) SQUIB ASSEMBLY (EMPTY) TO DRG. NO ERDL 959 DET. 4 DT 14-09-76 FOR PP9 RST[64]() Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76 C Nonestab
10) MFG OF L.T SQUIB. DRG NO ERDL 563.[96]() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 C Nonestab
11) CHARGES FOR MISC JOB FOR LT SQUIB[96]() Specification : DRG NO.ERDL-1046 DET-2. Dt. 19.11.2009 R Nonestab
12) SQUIBS TO DRG NO.ERDL 1004 DET NO.1[99]() Specification : ERDL SPECN NO. ERDL/PYRO/PS/145 C Nonestab
13) SQUIB PLUG DET.ELEC.82 MK IN2[64]() Specification : DRG. NO. HEMRL DRG. 1443 DET. NO. 8 DT. 25.11.97 C Nonestab
14) SQUIB PLUG TO DRG. NO. ERDL DRG 897, DET NO. 7[60]() Specification : DRG. NO. ERDL DRG 897, DET NO. 7 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX PLASTIC DRG NO AFK/SK-2224[14]() Specification : DRG NO. 04-44-79000-06130-3 C Nonestab
2) DISC LOW DENSITY POLYTHENE 3.2MM TH[21]() Specification : KF/SK-1572 C Nonestab
3) PLASTIC BOX FOR .22RF CARTGS.[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
4) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942[60]() Specification : DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942 C Nonestab
5) NYLON RING-DRG PT NO ITV 50[60]() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 C Nonestab
6) BASE CAP DRGN0 KF/PJ/SK-14DT22.8.85[60]() Specification : CQA[A] SEALED DRG NO -04-749-130222-01-4E C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
3) CONTAINER TO DRG.NO. ARDE 2056[65]() Specification : DRG.NO ARDE 2025 DETAIL NO 1 C Nonestab
4) CONTAINER 38 B WITH SLEEVE A & B &[65]() Specification : DESGN REF NO. CIA/AMN/2008 C Nonestab
5) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
6) CONTAINER (FOR C.E PELLET)[60]() Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033 C Nonestab
7) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204[65]() Specification : DRG NO ARDE 1910 DET. NO.1 & DET. NO. 5 C Nonestab
8) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
9) WASHER SEALING TO DRG AFK/SK/2187[63]() Specification : DRG NO AFK/SK/2187 SHEET NO 1 C Nonestab
10) CONTAINER NO.P-14 TO HOLD CARTGS[60]() Specification : CQA(A) 2804 C Nonestab
11) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]() Specification : CQA(A) 2804 C Nonestab
12) CONTAINER FOR BOOSTER CHARGE[60]() Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM[21]() Specification : AFK DRG.NO. KF/SK-1809 C Nonestab
2) HALF CUP B DRG.PT NO ISV 862,DCI-36[60]() Specification : DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 C Nonestab
3) H.CUP REF CIA/AMN/2158 PT ISV 1740[60]() Specification : DESIGNER'S REF. NO. CIA/AMN/2158 PT. NO.ISV 1740 C Nonestab
4) PLASTIC POWER PISTON FOR 70 MM 12 BORE[60]() Specification : DRG. NO KF/SK-1747 DATED 04/03/2000 C Nonestab
5) CUP HALF DRG. ARDE/2225 DET.8[60]() Specification : DRG.NO. ARDE/2225 DET.NO.8 DT.30.05.2008 C Nonestab
Category : p
Grade : Grade III
Size : S
3462 Multimetals Limited
Heavy Industries Area,Kansua Road, Rajasthan KOTA Rajasthan
PIN1 : 324003
Phone No. : 7118538 		AABCM6604J

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION Description : BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category : p
Grade : 3
Size : L
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE 22 35X16 70MM BS2871 M Lf 0717559001 Description : BRASS TUBE 22 35X16 70MM BS2871 M Lf 0717559001() Specification : TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS R Nonestab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE M 10583B TO SPEC JSS 9535 02 1995 REV NO1 UN ANNEALED AND STRESS RELIEVED FOR PR 18A MAGAZINE DRG NO IQX 192 Description : BRASS TUBE M 10583B TO SPEC JSS 9535 02 1995 REV NO1 UN ANNEALED AND STRESS RELIEVED FOR PR 18A MAGAZINE DRG NO IQX 192() Specification : BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UN ANNEALED AND STRESS RELIEVED R Estab
Category : p
Grade : 3
Size : L
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER ALLOY TUBE ID 39point87 0point25 mm THICKNESS 3point2 mm BOTH ENDS CUT IN SQUARE IN STRAIGHT LENGTH 1point5 TO 3 MTRS AS PER SPEC NO JSS 4710 01 88 GR IV Description : COPPER ALLOY TUBE ID 39point87 0point25 mm THICKNESS 3point2 mm BOTH ENDS CUT IN SQUARE IN STRAIGHT LENGTH 1point5 TO 3 MTRS AS PER SPEC NO JSS 4710 01 88 GR IV() Specification : COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SAT R Estab
Category : ddp
Grade : 3
Size : L
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) GUILDING METAL COPPER ALLOY TUBE Description : GUILDING METAL COPPER ALLOY TUBE() Specification : GUILDING METAL COPPER ALLOY TUBE AS PER DRG. NO. SK-8370 FOR 155MM SMOKE F-007ER 24KM (BOFORS) R Estab
2) BRASS TUBE Description : BRASS TUBE() Specification : BRASS TUBE TO SIZE : O/D 9.53+/-0.076MM X 0.71MM WT IN MULTIPLE LENGTH OF 115MM TO SPECN. IS:407-1966 ALLOY-1 IN ANNEALED CONDITION OF STD. FOR CENTRAL TUBE (DRG. NO. ARM-1099C4 ITEM NO.19) R Estab
3) CU-NI DRIVING BAND BLANK DRG. NO. SK-7894/B Description : CU-NI DRIVING BAND BLANK DRG. NO. SK-7894/B() Specification : CU-NI DRIVING BAND BLANK DRG. NO. SK-7894/B R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 44 MM WITH MIN 1 5 MTR STRAIGHT LENGTH Description : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE DIA 44 MM WITH MIN 1 5 MTR STRAIGHT LENGTH() Specification : BRASS ROD TO BS 2874 GRD CZ121 3 PB COND M SIZE: DIA 44 -0.1 0 MM WITH MIN 1.5 MTR STRAIGHT LENGTH R Estab
2) LEADED BRASS ROUND TO SPECN BS 2874 LATEST ISSUE GR CZ 121PB 3 IN M CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 3 POINT 658 MINUS 0 POINT 05 MM DIA Description : LEADED BRASS ROUND TO SPECN BS 2874 LATEST ISSUE GR CZ 121PB 3 IN M CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 3 POINT 658 MINUS 0 POINT 05 MM DIA() Specification : LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA R Estab
Category : ddp
Grade : 1
Size : S
3463 precision engineering
21, BIT-STEP, Mesra, Ranchi BIT Mesra Ranchi Jharkhand
PIN1 : 835215
Phone No. : 2271747
GSTIN : 20AACFP0811A1ZE 		RCHP00536E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6043000122 ADAPTER TUBE ASSY 81MM PWP, ITV 12A[60]() Specification : SPECN. NO. CQA(A) 2335 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141300140 CAP CHAMBER ZINC BASE ALLY[61]() Specification : CHAMBER (ZINC BASE ALLOY) to design.ref. CIA/AMN/474 Part No. QX- 40 DC- 35853-A DT.22-11-94. C Nonestab
2) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]() Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM. C Nonestab
3) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]() Specification : SPECN.NO. CQA(A) 0917 C Nonestab
2) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP[60]() Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP. C Nonestab
3) 6044100058 PLUG REPRESENTING FZ 162A FOR 81MM[60]() Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 FOR BOMB 81 MM MORTAR INERT-FUZED A, PLUGGED A, TO DRG. PART NO. ITV-7A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156250 TUBE DELAY(4 SECOND) PT.DRG.IQX 943[61]() Specification : TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011 C Nonestab
2) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC[63]() Specification : PRIMER ELECTRIC 1A/L EMPTY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6473200464 LINER EXPLODER CAVITY DRG.155-1070[64]() Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013 C Nonestab
2) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]() Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451300 DETONATOR HOLDER FOR CHARGE 145 MM[63]() Specification : DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7[63]() Specification : STRIKER MECHANISM DRG.NO.3-016919,53-B-025Y,CD-7,DC-34920-A DT.23-7-90 EXCEPT SUB ASSEMBLY CD-6 AND ITEM DETAIL 53 FOR FUZE B 429E/B 429. C Nonestab
2) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]() Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT[63]() Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04 E Nonestab
2) 6261102300 ADAPTER DRG PT SX 701 FOR 105MM TKS[62]() Specification : ADAPTER TO DRG PT NO SX-701 DC 35779-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156300 CAPSULE PT DRG NO IQX 514[61]() Specification : CAPSULE (ALUMINIUM-STRIP/WIRE) TO DRG.PT.NO. IQX 514DC-36852-A DT.23.9.02. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6473200194 CAPSULE ALUMINIUM TO DRG NO 6387453 DCI 36490 A FOR SHELL M 107 FOR 155MM AMMN[64]() Specification : CAPSULE ALUMINIUM TO DRG.NO.6387453 DCI 36490 A FOR SHELL M-107 FOR 155MM AMMN. C Nonestab
2) 6473200195 DISC ALUMINIUM TO DRG NO 6387457 DCI 36490 A[64]() Specification : DISC ALUMINIUM TO DRG.NO.6387457 DCI 36490 A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817 Description : PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817() Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/ R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DELAY HOLDER FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA(A) 2321 (b) DRG. NO. ARDE 2011 DET 11 PT NO. ITV 153 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2440A03062 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DELAY HOLDER FOR M.B. 51MM SMOKE 2A[62]() Specification : CQA(A) 2352 (d) DRG. NO. ARDE-2082 DET. NO. 3 PT. NO. IQX 879 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SPRING HOLDER FOR 81MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 7 PT NO ITV 258 SPECN: NO. CQA(A) 2345(C) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) HALF CUP FOR BOMB 81 MM ILLG. MK-II[62]() Specification : DRG NO.ARDE 2224 DET NO.5 PT NO. ISV 1930 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) IGNITER PERCUSSION (EMPTY) FOR SIGNAL DISTRESS D/N[64]() Specification : DRG. NO. NAD 8611/32 CONSISTING OF DRG. NO. NAD-8611/20, 21, 22 & 33 (TOTAL FOUR) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) NOSE CAP FOR 51 MM SMOKE [62]() Specification : DRG. NO. ARDE-2082 DET. NO. 7 PT. NO. ITV-215 DC(I)36288-A, SPECN.CQA(A) 2352(d) DC-36768-A DT 18-7-2001. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Set of 5 Components Upper Set for 51mm Illg. [62]() Specification : ARDE-2064 C Nonestab
2) Pin Locking for 51mm Illg. [62]() Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY FOR 51MM ILLUMINATING[62]() Specification : SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CUP FOR BOMB 51MM ILLG.[62]() Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]() Specification : DRG.NO 2440AI3012 DC-37535A DATED 22.10.19 C Nonestab
2) BODY UPPER FLASH 2A TO DRG NO ARDE 2285 DET NO 1 PART NO ITV 276 DC 36057A DT 28 121995 AND BODY LOWER FLASH 2A TO DRG NO ARDE DET NO 2 PART NO ITV277 DC 36550A DT 13041999[62]() Specification : DC-36057A DT 28.12.1995 DC -36550A DT 13.04.1999 C Nonestab
3) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
4) DELAY ELEMENT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12 C Nonestab
5) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
6) PLUG FOR 81MM AT AL[62]() Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994 C Nonestab
7) DELAY ELEMENT FOR 81MM SMOKE 3D6[62]() Specification : NO. CIA/AMN/2498,PART NO. IQX868 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) LINER Description : LINER() Specification : DRG. No.5173961, DC No.36490-A, Dt.19.11.98 (IS:737-2008, GR.19000 IN O CONDITION C Estab
2) FUNNEL & FUNNEL ASSEMBLY Description : FUNNEL & FUNNEL ASSEMBLY() Specification : ALUMINIUM POURING FUNNEL FOR SHELL 105MM AMMN. TO DRG. NO. BL/EQP/U-05/350, DT. 11.10.2006. S Estab
3) CAPSULE Description : CAPSULE() Specification : DRG. NO.-6387453, DC NO. 36490-A, DT.19.11.98 C Estab
4) CAP K3-2 Description : CAP K3-2() Specification : CAP K3-2 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2854, DC NO. 37271-A, DT. 08.11.10. SCANNED ON DT. 05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGE SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SHAPING OR BURRS S C Estab
5) CUP Y1-3 Description : CUP Y1-3() Specification : CUP Y1-3 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2855, DC NO. 37271-A, DT. 08.11.10. SCANNED ON DT. 05.01.11. HEIGHT SHOULD BE FROM 1.30 MM TO 1.40 MM. OUTSIDE DIAMETER SHOULD BE 2.35 MM TO 2.38 MM. NOTE:- EDGE SHOULD BE VERY SMOOTH C Estab
Category : p
Grade : 3
Size : S
3464 SEWA POWER INDUSTRIES
PLOT NO 65 DIC INDUSTRIAL ESTATE RANIA KANPUR DEHAT Uttar Pradesh
PIN1 : 209304
Phone No. : 9918396972
GSTIN : 09ASQPS6199E2ZT 		ASQPS6199E

Download 		1) Small Arms Factory
Name Specification Use Status
1) COVER RETAINER ASSEMBLY DRG No SK 6667 TE[70]() Specification : COVER RETAINER ASSEMBLY DRG No SK- 6667/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) THREAD COTTON SEWING 9.8 TEX X 6() Specification : JSS 8310 -02 :2007 R Estab
2) POLY BAG DRG 1930 ISV 1715() Specification : DESGN.REF.NO.ARDE 1930 DET.NO.2 PART NO ISV 1715 R Estab
3) POLYTHENE BAGS 55CMX55CMX300GAUGE() Specification : JSS 9330-03:2014 REVISION NO. 3 R Estab
4) CUP TO ERDL DRG 1005 DET NO.2 MRECM() Specification : DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009 R Estab
5) CLOSING DISC TO ERDL DRG NO 1005 MR() Specification : DRG.NO.ERDL DRG.1005 DET NO 3 DT.19.11-09 R Estab
6) CLOSING DISC TO DRG NO ERDL DRG. 1005 DET NO.8() Specification : DRG NO ERDL DRG. 1005 DET NO.8 DT 19.11.09 R Estab
7) INSULATOR TO DRG.NO.ARDE 2078/32() Specification : SPECN ARDE/SPECN/415 R Estab
8) ALLIED CONNECTOR - SOCKET.() Specification : ALLIED CONNECTOR - SOCKET NO 3106 F - 10 SL-4 S WITH DUST - PROOF COVER WITH SHORTING PLUG (DRG.NO.NASK 760/2 SHT. 1) DT. 07.10.13 R Estab
9) PISTON TO DRG NO ARDE 2015() Specification : ARDE 2015 DET 23 DATED 08-11-85 R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) THREAD COTTON SEWING 9.8 TEX X 6() Specification : JSS 8310 -02 :2007 R Estab
2) POLY BAG DRG 1930 ISV 1715() Specification : DESGN.REF.NO.ARDE 1930 DET.NO.2 PART NO ISV 1715 R Estab
3) POLYTHENE BAGS 55CMX55CMX300GAUGE() Specification : JSS 9330-03:2014 REVISION NO. 3 R Estab
4) CUP TO ERDL DRG 1005 DET NO.2 MRECM() Specification : DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009 R Estab
5) CLOSING DISC TO ERDL DRG NO 1005 MR() Specification : DRG.NO.ERDL DRG.1005 DET NO 3 DT.19.11-09 R Estab
6) CLOSING DISC TO DRG NO ERDL DRG. 1005 DET NO.8() Specification : DRG NO ERDL DRG. 1005 DET NO.8 DT 19.11.09 R Estab
7) INSULATOR TO DRG.NO.ARDE 2078/32() Specification : SPECN ARDE/SPECN/415 R Estab
8) ALLIED CONNECTOR - SOCKET.() Specification : ALLIED CONNECTOR - SOCKET NO 3106 F - 10 SL-4 S WITH DUST - PROOF COVER WITH SHORTING PLUG (DRG.NO.NASK 760/2 SHT. 1) DT. 07.10.13 R Estab
9) PISTON TO DRG NO ARDE 2015() Specification : ARDE 2015 DET 23 DATED 08-11-85 R Estab
Category : p
Grade : 3
Size : S
3465 M/s VAIBHAV ASSOCIATES, KANPUR
FLAT NO. F-2, BALAJI DHAM, 117/H-1/201, PANDU NAGAR KANPUR UTTAR PRADESH
PIN1 : 208005
Phone No. : 9450938501 		AAWPS8523J

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Polythene Bag SK 9060 A Description : Polythene Bag SK 9060 A() Specification : Polythene Bag SK 9060 A P Estab
Category : p
Grade : 2
Size : O
3466 MICRO METAL CRAFT
22, BIT-STEP MESRA RANCHI JHARKHAND
PIN1 : 835215
Phone No. : 0651-2271190
GSTIN : 20AARFM5599D1Z1 		RCHM02890G

Download 		1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: Description : FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO:() Specification : FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: QX-244 GE, DC NO. 31398-A, DT.10.02.75. (REF.DRG.FUZE PERCUSSION DA NO.117 EMPTY MK 20 ITEM LIST FOR QX 244 GE DCI-31398-A DT.10.02.75) C Estab
Category : p
Grade : 3
Size : S
3467 VIKAS METALS
NO.4-4-168, MAHAKALI STREET, RANIGUNJ SECUNDERABAD TELANGA
PIN1 : 500003
Phone No. : 9391055542 		AABHC0919B

Download 		1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET 2 X1250X2500 Description : STEEL SHEET 2 X1250X2500() Specification : STEEL SHEET 2 X1250X2500 to Grade Fe 410 IS:1079-88 R Estab
2) LOW CARBON FERRO MANGANESE Description : LOW CARBON FERRO MANGANESE() Specification : L.C FERRO MANGANESE, GRADE:O2FeMn72 PARTICLE SIZE CLASS:5, AS PER IS: 1171-2011, %MN=70-74; %C=0.20 MAX, %SI=1.0 MAX; %S=0.05 MAX; %P=0.30 MAX; PARTICLE SIZE RANGE: 3.12 TO 25MM. R Estab
Category : s
Grade : 3
Size : S
3468 CENTRAL INSTITUTE OF PLASTIC
ENGG. & TECHNOLOGY, B/25 BUUBANESWAR ODISA
PIN1 : 751024
Phone No. : 07612743368 		751024C001

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600) Description : SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Estab
Category : p
Grade : 3
Size : S
3469 K.E. ALLOYS PVT. LTD.
3/244, vishnupuri, Kanpur Kanpur Uttar Pradesh
PIN1 : 208002
Phone No. : 9839029155 		AAHCS9963Q

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) COLD ROLLED BRIGHT ANNEALED STEELSHEET Description : COLD ROLLED BRIGHT ANNEALED STEELSHEET() Specification : COLD ROLLED BRIGHT ANNEALED STEEL SHEET MADE FROM FULLY KILLED STEEL AS PER BS: 1449 PT 1 1983 GRADE -43/35 SIZE : 95MM+-0.25 WIDE THICKNESS 2.0MM+-0.06X920+15 MM LONG.( PART NO. ITV-46) R Estab
2) HOT ROLLED STEEL ROD 35MM Description : HOT ROLLED STEEL ROD 35MM() Specification : HOT ROLLED STEEL ROD 35MM (+0.07/-0.13) DIA SPECN. IS:1570 C-15 MN 75 FOR STRIKER HEAD AS PER DRG. NO. SK-6570/A MULTIPLE LENGTH OF 1 MTR R Estab
3) COLD DRAWN STEEL ROD 28 MM Description : COLD DRAWN STEEL ROD 28 MM() Specification : COLD DRAWN STEEL ROD 28 MM (+0.00/-0.13) DIA TO SPECN. IS: 1570, C20 IN 1 MTR LENGTH OR ITS MULTIPLE FOR LUG SUSPENSION (ITEM NO.8) OF ARM- 1099 C3/OFC DRG. NO. SK-6772. R Estab
4) Steel rod 85mm dia Description : Steel rod 85mm dia() Specification : Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758 R Estab
5) CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2 Description : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2() Specification : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinde R Estab
6) MS ROUND Description : MS ROUND() Specification : STEEL TO SPECN. IS:1570,C 20 COLD DRAWN ROD 1-1/4" (+0.004") IE 31.75MM DIA IN STANDARD LENGTH ( TAIL PLUG ARM -1099C4 ITEM NO. 20 AS PER OFC DRG. NO. SK-9757 R Estab
7) FORGED TO DIA 229 Description : FORGED TO DIA 229() Specification : FORGED TO DIA 229(+20MM) IN LENGTH OF 1 TO 1.5 METERS AS PER GR.MSF IX/3 (%C -0.95-1.15, SI -0.15-0.25, MN -2.0-2.5, S -0.03MAX, P-0.03MAX-CR.-0.3MAX) OR T90MN2W50CR45 AS PER IS:1570-1961) R Estab
8) STEEL ROD OF DIA 175MM Description : STEEL ROD OF DIA 175MM() Specification : STEEL ROD OF DIA 175MM X 60MM LENGTH OR ITS MULTIPLE LENGTH TO SPECN: IS:3749-1978 XT215 CR12 IN FORGED ANNEALED , SKIN TURN AND ULTRASONCALLY SOUND CONDITION, AS PER IS: 8791-1978 R Estab
9) STEEL ROD 102 Description : STEEL ROD 102() Specification : STEEL ROD 102 (+10)MM (4") DIA IN LENGTH OF 1 MTR TO 2 MTRS CLASS -IX/3 (%C-0.95-1.15, SI-0.15-0.25, MN -2.0-2.5,S-0.03MAX. P-0.03MAX, CR-0.03MAX) OR T90MN2W50CR45 AS PER IS: 1570-1961 R Estab
10) STEEL F AND A ROD 210 DIA X70MM SAE H10 Description : STEEL F AND A ROD 210 DIA X70MM SAE H10() Specification : STEEL FORGED & ANNEALED ROD 210 (+/-2 MM) DIA X 70 MM (+5MM) OR ITS MULTIPLE LENGTH OF 1 TO 2 METRE TO SPECN. SAEH -10 IN ROUGH MACHINED & ULTRASONICALLY SOUND CONDITION AS PER IS: 8791-1978 CLAUSE 9.1(A). R Estab
11) HSS ROD Description : HSS ROD() Specification : HSS ROD 2-1/2" DIA(63MM) TO SPECN. IS: 7291-1981 XT-72 W18 CR-4 V-1 TOLERANCE AS PER IS: 10604(PART-I)1983 R Estab
12) STEEL FLAT Description : STEEL FLAT() Specification : STEEL FLAT TO SIZE 12MM X 300MM TO SPECN. T-105CR5MN2 OF IS: 3749-1978 OR BS: 970 EN -31 IN LENGTH OF ONE TO TWO MTRS. R Estab
13) STEEL HSS ROUND 45 MM DIA Description : STEEL HSS ROUND 45 MM DIA() Specification : STEEL HSS ROUND 45 MM DIA TO SPECN. IS: 7291-1981 X T-72 W18 CR4 V-1 R Estab
14) Steel Flat to size 10mmX200mm in length of one meter Description : Steel Flat to size 10mmX200mm in length of one meter() Specification : MSF Class IX/3 or XII I/3 In forged & machined condition(Chemical composition: C-0.85-0.95%,SI-0.15-0.25%,MN-2.00-2.5%,S-0.03%,P- 0.03%,CR - 0.3% R Estab
15) HSS 70 MM DIA SPECN XT 72W Description : HSS 70 MM DIA SPECN XT 72W() Specification : H.S.S 70 MM DIA TO SPECN. XT-72 W18 CR4 V-1 OF IS -7291-1981 R Estab
Category : p
Grade : 2
Size : S
1) Ordnance Equipment Factory

[ENR Registration]
Name Specification Use Status
1) COPPER TUBES VARIOUS Description : COPPER TUBES VARIOUS() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category : s
Grade : 3
Size : O
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND 14 MM DIA Description : STEEL ROUND 14 MM DIA() Specification : SPECN: BS:970: PT31:1991 GD 817 M40 OR 826 M40, R Estab
Category : s
Grade : 3
Size : S
3470 PRADEEP AND COMPANY
SHOP NO. 7, CH. HARPHOOL SINGH BUILDING, MAIN PRAHLADPUR, BANGAR ROAD DELHI DELHI
PIN1 : 110040
Phone No. : 9911342322
GSTIN : 07AAKPG3665P1Z5 		DELB10538D

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BROWN CELLO ADHASIVE TAPE 2" WIDE() Specification : DRG.NO.AFK/SK-2582 SHEET 1 R Estab
2) CELLOPHANE TAPE 12MM WIDE() Specification : IND/ME/662 R Estab
3) TAPE ADH W/P PVC BASE 13 MM WIDE() Specification : IND/ME/790 R Estab
4) TAPE COTTON 6 MM WIDE() Specification : IND/ME/888 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK Description : TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK() Specification : TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE- 50MM WIDE, COLOUR BLACK SPECN. IND/ME/790(b)-2013 DC NO. 5266-ME, DT.24.06.2014 (EACH ROLL OF 50 MTRS.). P Estab
Category : s
Grade : 3
Size : S
3471 ASKA ENTERPRISES
1142 SADASIV PETH SHAKUNTALA ANANT APARTMENT PUNE MAHARASTRA
PIN1 : 411030
Phone No. : 07612743368 		411051A123

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) APC NO 5 ITEM CODE 1003103013 Description : APC NO 5 ITEM CODE 1003103013() Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC R Estab
2) APC NO 11 RD 1154 JSS 8030 24 ITEM CODE 1003111000 Description : APC NO 11 RD 1154 JSS 8030 24 ITEM CODE 1003111000() Specification : AMMUNITION PROTECTIVE COMPOSITION NO 11 TO SPECN. JSS-8030-24:2011 (REV NO. 2) DC NO. 5086-ME, DT 06.08.2012 R Estab
Category : p
Grade : 3
Size : S
3472 M/s MEHTA TUBES LIMITED
915-916, PLAZA PANCHSHEEL, 9TH FLOOR, 55 HUGHES ROAD, NEXT TO DHARAM PALACE, MUMBAI MUMBAI MAHARASHTRA
PIN1 : 400007
Phone No. : 9769955381 		AACCM9337R

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Guilding Metal Copper Alloy Tube as per Drg No SK 8370 for 155mm Smoke F 007ER 24 KM Bofors Description : Guilding Metal Copper Alloy Tube as per Drg No SK 8370 for 155mm Smoke F 007ER 24 KM Bofors() Specification : Guilding Metal Copper Alloy Tube as per Drg No.SK 8370 for 155mm Smoke F 007ER 24 KM Bofors E Estab
Category : p
Grade : 2
Size : O
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022 Description : COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022() Specification : as per Drawing R Estab
2) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095 Description : COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095() Specification : as per drawing R Estab
Category : ddp
Grade : 1
Size : L
3473 M/s SURYA ROSHNI LIMITED
PRAKASH NAGAR, BAHADURGARH, HARYANA BAHADURGARH HARYANA
PIN1 : 124507
Phone No. : 7042389776 		AAACS3558C

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2 Description : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2() Specification : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinde R Estab
Category : p
Grade : 2
Size : O
3474 DABIR PRECITECH PVT.LTD
F-60, ENGINEERING ZONE, ADDL. AMBERNATH INDUSTRIAL AREA, AMBERNATH (EAST), AMBERNATH (EAST) THANE MAHARASHTRA
PIN1 : 421506
Phone No. : 022-25888691 		AACCD4790K

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN Description : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN() Specification : As per drawing. C Estab
Category : p
Grade : 3
Size : S
3475 PIK INDIA
PATAUDI ROAD, GURGAON HARYANA
PIN1 : 122001
Phone No. : 9810064841 		AABFP6186B

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) Rubber Hose-Assly Description : Rubber Hose-Assly() Specification : AS/ GCF/SIZE/SPECIFICATION C Estab
Category : s
Grade : 3
Size : O
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) HOSE 1T8 60 TO 7052000860 Description : HOSE 1T8 60 TO 7052000860() Specification : TY:005.280(1T8-60) C Estab
2) HOSE TO 7052000885 Description : HOSE TO 7052000885() Specification : TY:005.280(2T8-85) C Estab
3) HOSE 2T 12 15 TO 7052001215 Description : HOSE 2T 12 15 TO 7052001215() Specification : TY:005.280-87(2T12-15) C Estab
4) HOSE TO 7052001615 Description : HOSE TO 7052001615() Specification : TY:005.280-76(2T16-15) C Estab
5) HOSE 2T 20 15 TO 7052002015 Description : HOSE 2T 20 15 TO 7052002015() Specification : TY:005.280(2T20-15) C Estab
6) HOSE 2T 25 15 TO 7052002515 Description : HOSE 2T 25 15 TO 7052002515() Specification : TY:005.280(2T25-15) C Estab
7) HOSE 1T 48 15 TO 7052004815 Description : HOSE 1T 48 15 TO 7052004815() Specification : TY:005.280(48-15) C Estab
8) HOSE TO 7052101807 Description : HOSE TO 7052101807() Specification : TY:005.6016-87(40Y18-7) C Estab
9) HOSE TO 7052102507 Description : HOSE TO 7052102507() Specification : TY:005.6016-87(40Y25-7) C Estab
10) HOSE TO 7052102513 Description : HOSE TO 7052102513() Specification : 40Y25-13 C Estab
11) HOSE 2M 12 15 TO 7052502515 Description : HOSE 2M 12 15 TO 7052502515() Specification : TY:38.005.1515-76 C Estab
Category : p
Grade : 2
Size : S
3476 BHANU ENGINEERING WORKS
17, B.K. MOITRA ROAD, P.O-BARANAGAR P.O-BARANAGAR KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 9836859407
GSTIN : 19AEAPB7409L1ZH 		CALA13808E

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) SPRING SEAR ASSEMBLY FOR PISTOL AUTO 9MM 1A. Description : SPRING SEAR FOR PISTOL AUTO 9MM 1A.() Specification : As per drawing C Estab
Category : p
Grade : 3
Size : S
1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) Spring Sear Assembly for 9mm Auto Pistol Description : Spring Sear Assembly for 9mm Auto Pistol() Specification : Spring Sear Assembly for 9mm Auto Pistol C Estab
Category : p
Grade : 3
Size : S
3477 STEEL ARTS
23-JAGAIPURWA, CHAKERI ROAD LAL BANGLOW KANPUR UTTAR PRADESH
PIN1 : 208007
Phone No. : 9936433693
GSTIN : 09AAQPJ2350N1Z8 		KNPR01122G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
3) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
4) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
5) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
6) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
7) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
8) SEAR AUTO FOR SMALL ARMS Description : SEAR AUTO FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description : Catch Barrel to DRG No. PH-1-5 (without heat treatment)() Specification : Catch Barrel to DRG No. PH-1-5 (without heat treatment) C Estab
10) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
11) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
12) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
13) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
14) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
15) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
16) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
17) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
18) REAR SIGHT CURSOR FOR SMALL ARMS Description : REAR SIGHT CURSOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
19) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
21) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
22) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
23) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. Description : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) Guide DS CAT No. 1005-006843 Description : Guide DS CAT No. 1005-006843() Specification : AS PER DRG. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
29) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
30) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
31) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
3) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
4) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
5) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
6) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
7) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
8) SEAR AUTO FOR SMALL ARMS Description : SEAR AUTO FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description : Catch Barrel to DRG No. PH-1-5 (without heat treatment)() Specification : Catch Barrel to DRG No. PH-1-5 (without heat treatment) C Estab
10) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
11) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
12) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
13) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
14) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
15) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
16) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
17) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
18) REAR SIGHT CURSOR FOR SMALL ARMS Description : REAR SIGHT CURSOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
19) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
21) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
22) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
23) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. Description : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) Guide DS CAT No. 1005-006843 Description : Guide DS CAT No. 1005-006843() Specification : AS PER DRG. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
29) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
30) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
31) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
3) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
4) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
5) Block Rear drg .no. CQA(SA) SK-454/4/1 for Rifle 5.56mm Description : Block Rear drg .no. CQA(SA) SK-454/4/1 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
6) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
7) SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION Description : SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : SEAR DRG NO AKC 01/10 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
8) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) SEAR FOR SMALL ARMS Description : SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Description : CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT)() Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) C Estab
11) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
12) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
13) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
14) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
15) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
16) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
17) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
18) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
19) Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433 Description : Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433() Specification : AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015 C Estab
20) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
21) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
22) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
23) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
Category : p
Grade : 3
Size : S
3478 ASHOKA MANUFACTURING LTD.,
16,2ND FLOOR, INDIA EXCHANGE PLACE, KOLKATA W.B.
PIN1 : 700001
Phone No. : 033-22902386 		CALA06752F

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BAYONET 1A FOR SMALL ARMS Description : BAYONET 1A FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
3) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
4) Bayonet No. 5 MK-1 DS CAT No. 1005-000951 Description : Bayonet No. 5 MK-1 DS CAT No. 1005-000951() Specification : AS PER DRG. C Estab
5) TRIGGER ASSY. TO DSCAT NO. 1005-006589 Description : TRIGGER ASSY. TO DSCAT NO. 1005-006589() Specification : AS PER DRG. C Estab
6) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
7) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
3479 M/s MB TRADERS, KANPUR
MB ENTERPRISES , H-557 WORLD BANK COLONY, BARRA KANPUR KANPUR UTTAR PRADESH
PIN1 : 208027
Phone No. : 9794739032 		AOKPS7993G

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Protective Ring to Drg. No. SK-8943 for Nozzle Front of Stabilizer Assembly of Rocket Pinaka Description : Protective Ring to Drg. No. SK-8943 for Nozzle Front of Stabilizer Assembly of Rocket Pinaka() Specification : As per Drg. No. SK-8943 P Estab
Category : p
Grade : 2
Size : O
3480 U.S ENTERPRISES
PLOT NO. 488, INDL. AREA, PHASE 9, MOHALI PANJAB
PIN1 : 160059
Phone No. : 09463390516
GSTIN : 03AFFPK3474A1Z0 		AFFPK3474A

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A R Estab
Category : p
Grade : 3
Size : S