List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3641 V.G.Steel Corporation
47/11 Bagia Mani Ram Bagia Mani Ram Kanpur Uttar Pradesh
PIN1 : 208001
Phone No. : 2560295 		AABFV1362R

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Round 16mm Dia 1983 GD 420 S37 EN 56 C Description : Steel Round 16mm Dia 1983 GD 420 S37 EN 56 C() Specification : Steel Round 16mm Dia. 1983 GD. 420 S37. (EN 56 C) R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL FL 50X25MM Description : STEEL FL 50X25MM() Specification : STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3(EN-24) R Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STC RD 1 inch Description : STC RD 1 inch() Specification : STC RD 1"(25MM) DIA TEMP-B WITH THE FOLLOWING CHEMICAL COMPOSITION:-C%=1.15 TO 1.25 SI%=0.25 MAX., MN%-0.45 MAX., S&P%=0.035 MAX. OR AS PER IS-3749-1978 GRADE T-118 R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Cold Rolled Bright Annealed Steel Sheet made from fully killed Steel Description : Cold Rolled Bright Annealed Steel Sheet made from fully killed Steel() Specification : BS:1449 PS-I-83 grade-43/35 size: 95MM+/-0.25 wide thickness 2.0MM+/-0.06x920+15mm long R Estab
2) Forged Round Hot Rolled Steel Bars 20 to 300mm Description : Forged Round Hot Rolled Steel Bars 20 to 300mm() Specification : As per specification R Estab
Category : p
Grade : 2
Size : S
3642 VIJAYA CHANDRA INDUSTRIES
PLOT No. 22 B, PHASE V, IDA CHERLAPALLY HYDERABAD Telangana
PIN1 : 500051
Phone No. : 27269999
GSTIN : 36ADFPK2431D1Z2 		ADFPK2431D

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SPRING TO 6206003118[62]() Specification : 155.27.376 C Nonestab
2) SPRING TO 6206102170[62]() Specification : 6206102170 C Nonestab
3) SPRING TO 6206109122[62]() Specification : 155.32.121 C Nonestab
4) SPRING TO 6206305580[62]() Specification : 6206305580 R Nonestab
5) SPRING TO 6206109025[62]() Specification : 172.11.079-1 C Nonestab
6) SPRING TO 6206109075[62]() Specification : 6206109075 C Nonestab
7) SPRING TO 6206209073[62]() Specification : 6206209073 C Nonestab
8) SPRING TO 6206609136[62]() Specification : 6206609136 C Nonestab
9) SPRING TO 6206609160[62]() Specification : 6206609160 C Nonestab
10) SPRING TO 6206102492[62]() Specification : 6206102492 C Nonestab
11) SPRING TO 6206111444[62]() Specification : 6206111444 C Nonestab
12) SPRING TO 6206609142[62]() Specification : 6206609142 C Nonestab
13) SPRING TO 6206801527[62]() Specification : 6206801527 C Nonestab
14) SPRING TO 6206004170[62]() Specification : 6206004170 C Nonestab
15) SPRING TO 6206113266[62]() Specification : AS PER DRG P Nonestab
16) SPRING TO 6206212217[62]() Specification : AS PER DRAWING P Nonestab
17) SPRING TO 6206603131[62]() Specification : AS PER DRAWING P Nonestab
18) SPRING TO 6206890218[62]() Specification : AS PER DRAWING P Nonestab
19) SPRING TO 6206201203[62]() Specification : AS PER DRAWING P Nonestab
20) SPRING TO 6206102475[62]() Specification : AS PER DRAWING P Nonestab
Category :
Grade : Grade III
Size : S
1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) SPRING MAIN FOR 9MM AUTO PISTOL 1A Description : SPRING MAIN FOR 9MM AUTO PISTOL 1A() Specification : As per drawing C Estab
2) Spring Catch Safety for 9mm Auto Pistol Description : Spring Catch Safety for 9mm Auto Pistol() Specification : As per drawing C Estab
Category : p
Grade : 3
Size : M
3643 PUNIT ENTERPRISES
30/17, D-2 BLOCK, MIDC CHINCHWAD, PUNE-411019 MIDC CHINCHWAD PUNE Maharashtra
PIN1 : 411019
Phone No. : 9822033017
GSTIN : 27AASPG6786H1Z0 		PNEUO5299A

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CYLINDER POLYTHENE FOR FOG SIGNAL[64]() Specification : OFDR/CARTG-84/R-3/A3 C Estab
2) Heat Shrink Tube for Shell 155mm Illg. M1A1[63]() Specification : [DRG. NO. 2440A03096] C Estab
3) RUBBER RING FOR MORTAR BOMB 81MM ILLG 2A[62]() Specification : CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134] C Nonestab
4) CUP PLASTIC FOR 81MM ILLG MK-II[62]() Specification : DRG NO ARDE 2222 DET 10 PT NO ITV 262 SPECN. NO. CQA (A) 2345 (C) C Estab
5) SPRING HOLDER FOR 81MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 7 PT NO ITV 258 SPECN: NO. CQA(A) 2345(C) C Estab
6) RUBBER WASHER FOR 105 MM ILLG.[62]() Specification : DRG.ARDE 9769 DET NO 18 PART NO.ISX 432 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) O RING FOR MORTAR BOMB 81MM ILLG 2A[62]() Specification : CQA(A) 2345 (C) [DRG. NO. ARDE 2222, DET 6, PART NO ITV 263] C Nonestab
2) CUP HDPE FOR SHELL 84MM ILLG.[62]() Specification : F-1301-56251-A C Estab
3) CARRIER AMMN 17A FOR 81MM ILLG. MK-II[62]() Specification : DRG.NO ARDE 2224 PT NO ISV 551A SHEET NO.3 SPECN. NO. CQA(A) 2804 (M) C Nonestab
4) HALF CUP FOR BOMB 81 MM ILLG. MK-II[62]() Specification : DRG NO.ARDE 2224 DET NO.5 PT NO. ISV 1930 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) TRANSIT PLUG FOR SHELL 84 mm ILLG.[62]() Specification : CIA/AMMN/2220 C Estab
2) SET OF COMPONENTS FOR SIGNAL DISTRESS D/N 1 MK IN[64]() Specification : DRG. NOS. NAD-8611/38, 40, 37, 39, 27, 29, 2 AND 36 (TOTAL EIGHT) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) OUTER TUBE FOR PARA FLARE RED [61]() Specification : DRG.NO. OFDR/CT/34M/ U-I/A4 C Estab
2) VENTURY ASSEMBLY FOR PARA FLARE RED[62]() Specification : DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98) C Estab
3) BURSTER TUBE (STEEL) FOR PARA FLARE RED[62]() Specification : DRG.NO.OFDR/CT /19/ UI/A-4 (AMENDMENT NO.88 DT.9-5-98) C Estab
4) BASE YELLOW FOR PARA FLARE RED[61]() Specification : DRG NO.OFDR/CT/30/M/A-2. DATED 05/11/1996 C Nonestab
5) BOTTOM SAFETY COVER PARA FLARE RED[61]() Specification : DRG NO.OFDR/CT/41/M/UI/A-3 C Estab
6) SUPPORT FOR PARA FLARE RED[62]() Specification : DRG NO OFDR/CT/17/UI/A4 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CAP TOP CLOSING FOR HAND FLARE[64]() Specification : DRG.NO.OFDR/CT/1/12/A3 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) POLY PROPYLENE DISC FOR 51MM SMOKE[62]() Specification : DRG. NO.CQA(A)/AMN/2868 PT.NO.ITV 252 C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PARACHUTE HOUSING FOR 51 MM ILLG.[62]() Specification : DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) RUBBER WASHER FOR 51MM ILLG.[62]() Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SPOOL COMPLETE (ITEM NO. 18) POLY MOULDING FOR FTW[64]() Specification : DRG. NO. DD(L) 13461-A/1 C Estab
2) AMMUNITION CONTAINER 75A (ASSY)[65]() Specification : DRG. NO. CQA/AMN/3259 PART NO. ISV 583A C Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Obturator for Shell 155mm Illg M1A1[63]() Specification : [DRG. NO. 155-1140] C Estab
2) Scuff Protector for Shell 155mm Illg M1A1[63]() Specification : [DRG. NO. 155-1110] C Estab
3) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1[63]() Specification : DRG. NO. 155-1120 C Estab
4) Protector, Spilt half, drogue( HDPE) for Shell 155 mm Illg M1A1[63]() Specification : DRG.NO. 2440A03092 C Estab
5) Protector, Top drogue (HDPE Type-2) for Shell 155 mm Illg M1A1[63]() Specification : DRG.NO. 2440A03093 C Estab
6) SPACER[63]() Specification : SPACER TO DRG.NO. 2439A00016 DC 36552A DATED 24.4.99.MATL ACRYLONITRILE BUTADIENE RUBBER COMPOUND GRADE "D" [TO SPECN.NO.IND/ME/914(PROV). DC 3496ME DTD. 6/2/98. E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) PLAQUE PLASTIC LARGE DRG NO 155 1190 HDPE TO SPECN JSS 9330 03 1995 TYPE 2[63]() Specification : SPECN JSS 9330 03 1995 TYPE 2 C Estab
2) PLAQUE PLASTIC SMALL DRG NO 155 1200 HDPE TO SPECN JSS 9330 03 1995 TYPE 2[63]() Specification : SPECN JSS 9330 03 1995 TYPE 2 C Estab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BASE CAP (BLACK) FOR PROJECTILE() Specification : DRG. NO. AFK/PJ/SK-62/1 R Estab
2) PLUG TO DRG NO KF SK 1746() Specification : SPECN. NO. DGOF 135 (a) DT. 15.11.19 R Estab
3) CHARGE HOLDER TO DRG.NO.KF/SK-1746() Specification : DGOF 135 R Estab
4) PLUG FUZE HOLE, 35 MM NO. 6 AS PER DRG. NO. CIA/AMN/2125 PART NO. ITV 95() Specification : DRG. NO. CIA/AMN/2125 PART NO. ITV 95 R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1[60]() Specification : DRG. NO. AFK/SK-2888 C Nonestab
2) PLASTIC INDEX DISC-SHOT NO.6[60]() Specification : DRG.NO.AFK/SK-2888.DT. 17.01.2007SHT.1 C Nonestab
3) PLASTIC INDEX DISC-SHOT NO.BB[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
4) PLASTIC INDEX DISC-SHOT NO.8[60]() Specification : DRG NO. AFK/SK-2888 DT.04.05.2002 C Nonestab
5) PLASTIC INDEX DISC-SHOT NO.4 No[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
6) PLASTIC INDEX DISC-SHOT NO.7[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
7) PLASTIC INDEX DISC-SHOT NO.9[60]() Specification : DRG.NO.AFK/SK-2888 DT.11.01.2007 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]() Specification : NASK 856 (PROVISIONAL) C Nonestab
2) SET OF PYRO SQUIB OPERATOR II-253ME[60]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[60]() Specification : DRG. NO. ERDL,1164 DET. 2 C Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[60]() Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X C Nonestab
5) BRIDGED SQUIB[60]() Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98 C Nonestab
6) SQUIB (EMPTY) FOR IGNITER EB-2[60]() Specification : DRG.NO. AFK-SK-343-06 DT.02.02.2006 C Nonestab
7) SQUIB HOLDER DRG.NO. AFK/SK-334-06][60]() Specification : DRG. NO. AFK/SK-334-06 R Nonestab
8) SQUIB HOLDER - DRG.NO. AK/SK-303-05[60]() Specification : DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.27.11.2014 C Nonestab
9) SQUIB ASSEMBLY (EMPTY) TO DRG. NO ERDL 959 DET. 4 DT 14-09-76 FOR PP9 RST[64]() Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76 C Nonestab
10) MFG OF L.T SQUIB. DRG NO ERDL 563.[96]() Specification : DRG.NO.ERDL 563 DET NO. 7 DATE 9.6.89 C Nonestab
11) CHARGES FOR MISC JOB FOR LT SQUIB[96]() Specification : DRG NO.ERDL-1046 DET-2. Dt. 19.11.2009 R Nonestab
12) SQUIBS TO DRG NO.ERDL 1004 DET NO.1[99]() Specification : ERDL SPECN NO. ERDL/PYRO/PS/145 C Nonestab
13) SQUIB PLUG DET.ELEC.82 MK IN2[64]() Specification : DRG. NO. HEMRL DRG. 1443 DET. NO. 8 DT. 25.11.97 C Nonestab
14) SQUIB PLUG TO DRG. NO. ERDL DRG 897, DET NO. 7[60]() Specification : DRG. NO. ERDL DRG 897, DET NO. 7 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX PLASTIC DRG NO AFK/SK-2224[14]() Specification : DRG NO. 04-44-79000-06130-3 C Nonestab
2) DISC LOW DENSITY POLYTHENE 3.2MM TH[21]() Specification : KF/SK-1572 C Nonestab
3) PLASTIC BOX FOR .22RF CARTGS.[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
4) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942[60]() Specification : DRG NO ARDE 2233 DET NO.1 PART NO ISV 1942 C Nonestab
5) NYLON RING-DRG PT NO ITV 50[60]() Specification : DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 C Nonestab
6) BASE CAP DRGN0 KF/PJ/SK-14DT22.8.85[60]() Specification : CQA[A] SEALED DRG NO -04-749-130222-01-4E C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PL.CONTAINER WITH SLEEVES FOR CCJC[60]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]() Specification : CQA(A)2804 C Nonestab
3) CONTAINER TO DRG.NO. ARDE 2056[65]() Specification : DRG.NO ARDE 2025 DETAIL NO 1 C Nonestab
4) CONTAINER 38 B WITH SLEEVE A & B &[65]() Specification : DESGN REF NO. CIA/AMN/2008 C Nonestab
5) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
6) CONTAINER (FOR C.E PELLET)[60]() Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033 C Nonestab
7) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204[65]() Specification : DRG NO ARDE 1910 DET. NO.1 & DET. NO. 5 C Nonestab
8) CONTAINER TO ARDE-1933 DET-4 ITV 170[60]() Specification : CQA (A) 2322 C Nonestab
9) WASHER SEALING TO DRG AFK/SK/2187[63]() Specification : DRG NO AFK/SK/2187 SHEET NO 1 C Nonestab
10) CONTAINER NO.P-14 TO HOLD CARTGS[60]() Specification : CQA(A) 2804 C Nonestab
11) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]() Specification : CQA(A) 2804 C Nonestab
12) CONTAINER FOR BOOSTER CHARGE[60]() Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC POWER PISTON W/O POUCH 65MM[21]() Specification : AFK DRG.NO. KF/SK-1809 C Nonestab
2) HALF CUP B DRG.PT NO ISV 862,DCI-36[60]() Specification : DES REF NO CIA/AMN/851 DRG PT.NO. ISV 862 C Nonestab
3) H.CUP REF CIA/AMN/2158 PT ISV 1740[60]() Specification : DESIGNER'S REF. NO. CIA/AMN/2158 PT. NO.ISV 1740 C Nonestab
4) PLASTIC POWER PISTON FOR 70 MM 12 BORE[60]() Specification : DRG. NO KF/SK-1747 DATED 04/03/2000 C Nonestab
5) CUP HALF DRG. ARDE/2225 DET.8[60]() Specification : DRG.NO. ARDE/2225 DET.NO.8 DT.30.05.2008 C Nonestab
Category : p
Grade : Grade III
Size : S
3644 lucky engineerring company
25 HSIIDC KUNDLI INDUSTRIAL AREA SONEPAT HARAYANA 131028 KUNDLI KUNDLI Haryana
PIN1 : 131028
Phone No. : 9711170777
GSTIN : 06AAAFL9689E1Z0 		AAAFL9689E

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
3) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
4) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
5) FILLING PLUG MCD 450 KG L F NO 6230400504[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
6) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
7) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED). C Nonestab
8) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
9) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
10) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
11) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
12) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
13) PROTECTING RING ASSEMBLY L F NO 6220900611[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED]. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]() Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES C Nonestab
2) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]() Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES. C Nonestab
3) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]() Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T C Nonestab
4) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]() Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG TRG FOR 81MM MOR BOMB3B EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A TO DESIGNER'S REF.ARDE-1933 DETAIL NO. 2 PART NO.ITV-17 SA SHT 1&2 SPECN CQA(A)- 2322() Specification : CQA(A)- 2322 R Estab
2) STRIKER DET 3 PART ITW 65 DC (I)() Specification : CQA(A) 1504 R Estab
3) FILLING HOLE PLUG(ALUMN)() Specification : CQA(A)1504 R Estab
4) MINE APM CONSISTING OF BODY,SPOOL() Specification : CQA(A) 1804 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B Description : Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B() Specification : As per Drg. No. SK-9042/B C Estab
2) FORGED PROOF MACHINED BLANK FIN CYLINDER Description : FORGED PROOF MACHINED BLANK FIN CYLINDER() Specification : FORGED PROOF MACHINED BLANK FIN CYLINDER TO DRG. NO. SK- 8928/D C Estab
Category : p
Grade : 3
Size : S
3645 MAHESH ENTERPRISES
SHOP NO. 11, CHINTAMANI VORTEX, VISHRANTI NAGAR, SINHGAD ROAD, HINGNE(KH) PUNE MAHARASHTRA
PIN1 : 411051
Phone No. : 9767100303
GSTIN : 27ABUPK7976L1ZH 		ABUPK7976L

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PLASTIC BOX FOR .22RF CARTGS.() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 R Estab
2) TRIMMING DIE TC DRG AFK CT 1385() Specification : DRG. NO. AFK/ CT- 1385 DT. 23-3-2001 R Estab
3) SCREEN PRINTING ON CAP CHAMBER() Specification : AS PER AFK SPECN. R Estab
4) PRINTING OF 12 BORE CARTG CASE() Specification : SPECN NO. DGOF 128 (d) R Estab
5) CHRGS MISC JOB - STENCILLING BOX H2A() Specification : DRG. NO. ARDE SK 3131, DRG. NO. CIA/AMN/ST/35 R Estab
6) MFG AND PKG OF 5 POINT 56 MM DUMMY SECTION() Specification : SPECIFICATION NO. L1/SPECN/5.56 MM DUMMY SECTIONED EXHIBIT R Estab
7) MISC. JOB - STENCILLING ON BOX B9A() Specification : DRG.NO.:-CQA(A)/AMN/ST/304 FOR BOMB 51 MM HE R Estab
8) CHARGES FOR MISC. JOB STENCILLING OF CARRIER 13A() Specification : DRG. NO. CQA(A)/AMN/3143 AND DRG. NO. CIA/AMN/ST/233 R Estab
Category : p
Grade : 3
Size : S
3646 M/s ADINATH INDUSTRIES
PLOT NO. 224, SECTOR-7, SIDCUL INDUSTRIAL AREA, HARIDWAR HARIDWAR UTTRAKHAND
PIN1 : 249403
Phone No. : 9810060890
GSTIN : 08AAEFA6033D1ZX 		AAEFA6033D

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) NYLON RING TO DRG. NO. ISX- 426 Description : NYLON RING TO DRG. NO. ISX- 426() Specification : NYLON RING TO DRG. NO. ISX- 426 required for Shell 130mm HE1B P Estab
Category : p
Grade : 2
Size : O
3647 PIK INDIA
PATAUDI ROAD, GURGAON HARYANA
PIN1 : 122001
Phone No. : 9810064841 		AABFP6186B

Download 		1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) Rubber Hose-Assly Description : Rubber Hose-Assly() Specification : AS/ GCF/SIZE/SPECIFICATION C Estab
Category : s
Grade : 3
Size : O
1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) HOSE 1T8 60 TO 7052000860 Description : HOSE 1T8 60 TO 7052000860() Specification : TY:005.280(1T8-60) C Estab
2) HOSE TO 7052000885 Description : HOSE TO 7052000885() Specification : TY:005.280(2T8-85) C Estab
3) HOSE 2T 12 15 TO 7052001215 Description : HOSE 2T 12 15 TO 7052001215() Specification : TY:005.280-87(2T12-15) C Estab
4) HOSE TO 7052001615 Description : HOSE TO 7052001615() Specification : TY:005.280-76(2T16-15) C Estab
5) HOSE 2T 20 15 TO 7052002015 Description : HOSE 2T 20 15 TO 7052002015() Specification : TY:005.280(2T20-15) C Estab
6) HOSE 2T 25 15 TO 7052002515 Description : HOSE 2T 25 15 TO 7052002515() Specification : TY:005.280(2T25-15) C Estab
7) HOSE 1T 48 15 TO 7052004815 Description : HOSE 1T 48 15 TO 7052004815() Specification : TY:005.280(48-15) C Estab
8) HOSE TO 7052101807 Description : HOSE TO 7052101807() Specification : TY:005.6016-87(40Y18-7) C Estab
9) HOSE TO 7052102507 Description : HOSE TO 7052102507() Specification : TY:005.6016-87(40Y25-7) C Estab
10) HOSE TO 7052102513 Description : HOSE TO 7052102513() Specification : 40Y25-13 C Estab
11) HOSE 2M 12 15 TO 7052502515 Description : HOSE 2M 12 15 TO 7052502515() Specification : TY:38.005.1515-76 C Estab
Category : p
Grade : 2
Size : S
3648 BHANU ENGINEERING WORKS
17, B.K. MOITRA ROAD, P.O-BARANAGAR P.O-BARANAGAR KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 9836859407
GSTIN : 19AEAPB7409L1ZH 		CALA13808E

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) SPRING SEAR ASSEMBLY FOR PISTOL AUTO 9MM 1A. Description : SPRING SEAR FOR PISTOL AUTO 9MM 1A.() Specification : As per drawing C Estab
Category : p
Grade : 3
Size : S
1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) Spring Sear Assembly for 9mm Auto Pistol Description : Spring Sear Assembly for 9mm Auto Pistol() Specification : Spring Sear Assembly for 9mm Auto Pistol C Estab
Category : p
Grade : 3
Size : S
3649 STEEL ARTS
23-JAGAIPURWA, CHAKERI ROAD LAL BANGLOW KANPUR UTTAR PRADESH
PIN1 : 208007
Phone No. : 9936433693
GSTIN : 09AAQPJ2350N1Z8 		KNPR01122G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
3) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
4) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
5) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
6) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
7) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
8) SEAR AUTO FOR SMALL ARMS Description : SEAR AUTO FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description : Catch Barrel to DRG No. PH-1-5 (without heat treatment)() Specification : Catch Barrel to DRG No. PH-1-5 (without heat treatment) C Estab
10) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
11) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
12) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
13) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
14) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
15) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
16) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
17) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
18) REAR SIGHT CURSOR FOR SMALL ARMS Description : REAR SIGHT CURSOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
19) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
21) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
22) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
23) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. Description : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) Guide DS CAT No. 1005-006843 Description : Guide DS CAT No. 1005-006843() Specification : AS PER DRG. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
29) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
30) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
31) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) Steel Blank for Receiver plate for MAG 7.62MM Description : Steel Blank for Receiver plate for MAG 7.62MM() Specification : AS PER DRG. C Estab
3) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
4) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
5) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
6) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
7) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
8) SEAR AUTO FOR SMALL ARMS Description : SEAR AUTO FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) Catch Barrel to DRG No. PH-1-5 (without heat treatment) Description : Catch Barrel to DRG No. PH-1-5 (without heat treatment)() Specification : Catch Barrel to DRG No. PH-1-5 (without heat treatment) C Estab
10) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
11) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
12) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
13) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
14) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION Description : SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION() Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 C Estab
15) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
16) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
17) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
18) REAR SIGHT CURSOR FOR SMALL ARMS Description : REAR SIGHT CURSOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
19) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
21) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
22) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
23) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. Description : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) Guide DS CAT No. 1005-006843 Description : Guide DS CAT No. 1005-006843() Specification : AS PER DRG. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
29) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
30) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
31) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Estab
2) STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884 Description : STEEL BLANK OF RECEIVER PLATE( L& R)-SET Drg. No. SKM 884() Specification : AS PER DRG C Estab
3) BARREL BLANK FOR REVOLVER Description : BARREL BLANK FOR REVOLVER() Specification : AS PER DRAWING C Estab
4) BODY TRIGGER Drg. No 1099 A Description : BODY TRIGGER Drg. No 1099 A() Specification : AS PER DRG C Estab
5) Block Rear drg .no. CQA(SA) SK-454/4/1 for Rifle 5.56mm Description : Block Rear drg .no. CQA(SA) SK-454/4/1 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
6) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
7) SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION Description : SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : SEAR DRG NO AKC 01/10 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
8) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
9) SEAR FOR SMALL ARMS Description : SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
10) CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Description : CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT)() Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) C Estab
11) CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 Description : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10() Specification : CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 C Estab
12) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
13) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
14) Lever Extractor PH-1-7 Description : Lever Extractor PH-1-7() Specification : As per Drg. C Estab
15) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
16) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
17) Bracket Carrying Handle 1005-006604 Description : Bracket Carrying Handle 1005-006604() Specification : As Per Drg. C Estab
18) FRONT FEED PAWL for MAG Description : FRONT FEED PAWL for MAG() Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02 C Estab
19) Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433 Description : Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433() Specification : AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015 C Estab
20) COVER CATCH for MAG Description : COVER CATCH for MAG() Specification : COVER CATCH TO DS CAT NO. 1005-000464 DC(I) NO. 27019-SA DT- 28.01.17. C Estab
21) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. Description : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Estab
22) COLLAR MOUNTING FRONT for MAG Description : COLLAR MOUNTING FRONT for MAG() Specification : COLLAR MOUNTING FRONT TO DS CAT NO.3120-004671 DC(I) NO.25310-SA DT.30/03/02 IN FINISHED CONDITION C Estab
23) BODY BARREL LOCKING CATCH DS CAT 1005-006830 Description : BODY BARREL LOCKING CATCH DS CAT 1005-006830() Specification : AS PER DRG DS CAT 1005-006830 C Estab
24) PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM Description : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM() Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 25325-SA DT. 10.04.2002 FOR MAG 7.62MM C Estab
25) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.() Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION. C Estab
26) FEED ARM FOR AIR VERSION for MAG Description : FEED ARM FOR AIR VERSION for MAG() Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION C Estab
27) SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) Description : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 )() Specification : SEMI FINISHED BLANK TO DRG.NO. SKM 1012 ( FOR BRACKET BACK SIGHT, MAG 7.62 ) C Estab
28) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
Category : p
Grade : 3
Size : S
3650 ASHOKA MANUFACTURING LTD.,
16,2ND FLOOR, INDIA EXCHANGE PLACE, KOLKATA W.B.
PIN1 : 700001
Phone No. : 033-22902386 		CALA06752F

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BAYONET 1A FOR SMALL ARMS Description : BAYONET 1A FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition Description : Tool adjusting Sight Assy. DS CAT No. 4933-000404 in finished condition() Specification : AS PER DRG. C Estab
3) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
4) Bayonet No. 5 MK-1 DS CAT No. 1005-000951 Description : Bayonet No. 5 MK-1 DS CAT No. 1005-000951() Specification : AS PER DRG. C Estab
5) TRIGGER ASSY. TO DSCAT NO. 1005-006589 Description : TRIGGER ASSY. TO DSCAT NO. 1005-006589() Specification : AS PER DRG. C Estab
6) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
7) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
3651 U.S ENTERPRISES
PLOT NO. 488, INDL. AREA, PHASE 9, MOHALI PANJAB
PIN1 : 160059
Phone No. : 09463390516
GSTIN : 03AFFPK3474A1Z0 		AFFPK3474A

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A R Estab
Category : p
Grade : 3
Size : S
3652 M/s CHOWDHURY PACKAGERS
D-37, MIDC, INDUSTRIAL AREA, NAGPUR NAGPUR MAHARASHTRA
PIN1 : 440028
Phone No. : 9373103457 		AKYPA6267D

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Corr. Paper Board Box Drg. SK-9378/B Description : Corr. Paper Board Box Drg. SK-9378/B() Specification : As per drawing P Estab
Category : p
Grade : 2
Size : S
3653 THORO PACKAGING INDUSTRIES
OFFICE NO. 3, THAKKAR HOUSE, EAST STREET, CAMP PUNE MAHARASHTRA
PIN1 : 411001
Phone No. : 02026123313 		AAAFT6877E

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PIC PKG TOP 460mmx175mmx20mm THICK Description : PIC PKG TOP 460mmx175mmx20mm THICK() Specification : MATERIAL EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG PER CUBIC METRE. R Estab
2) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM Description : E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM() Specification : IS:4671-1984 R Estab
3) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM Description : E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM() Specification : IS:4671-1984 R Estab
4) POLYSTRENE FOAM TYPE2, 275X142X6MM Description : POLYSTRENE FOAM TYPE2, 275X142X6MM() Specification : IS:4671-1984 R Estab
5) PIECE PKG. POLYSTRINE 250X170X12MM Description : PIECE PKG. POLYSTRINE 250X170X12MM() Specification : IS:4671_1984 R Estab
6) PIECE PKG. POLYSTERINE 240X110X15 Description : PIECE PKG. POLYSTERINE 240X110X15() Specification : IS:4671_1984 R Estab
Category : p
Grade : 3
Size : S
3654 RIALTO ENTERPRISES PVT. LTD.
PLOT NO. 13&14, OLD MAHABALIPURAM ROAD KOTTIVAKKAM CHENNAI TAMILNADU
PIN1 : 600041
Phone No. : 044 24483595
GSTIN : 33AAACR3589E1ZG 		CHER06488G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897 Description : Bipod Assy (for LMG 5.56 mm) DS CAT 1005-557897() Specification : AS PER DRG. C Estab
2) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56 Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56() Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR) C Estab
3) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
3655 TECHNO STEEL & STRIPS
57/3/1, NETAJI SUBHAS ROAD, LILUAH HOWRAH WEST BENGAL
PIN1 : 711204
Phone No. : 03326455104 		AAIPD9373H

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) COLD ROLLED STEEL STRIP 13MMX 0.5MM() Specification : IS 5872-1990 RE:00 R Estab
2) ALUMINIUM STRIP 0.46+0.04MM-0.05MM X34.3MM() Specification : IS 737-2008 (4TH REVISION) GRADE 19000 R Estab
Category : p
Grade : 3
Size : S
3656 PRADEEP FURNITURES
176, EAST GHAMAPUR, NEAR KANCHGHAR CHOWK JABALPUR MADHYA PRADESH
PIN1 : 482002
Phone No. : 07612620616 		ACOPJ3709M

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PLYWOOD 120X120X6MM IS:303-1975() Specification : IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6 R Estab
2) UNIT LOAD TO DRG NO 04-44-79000-() Specification : AS PER AFK SPECN. R Estab
3) AMMUNITION CONTAINER M31-A,CQA/AMN/2870() Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A R Estab
Category : p
Grade : 3
Size : S
3657 AMBICA SONS
879,NORTH CIVIL LINE BEHIND MARBAL CITY HOSPITAL JABALPUR M.P.
PIN1 : 482002
Phone No. : 07612743368 		0000TR1304

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ACID ACETIC PURE LF 1001010301 Description : ACID ACETIC PURE LF 1001010301() Specification : ACETIC ACID GRADE- AR/GR/EXCELLAR MAKE-RANKEM/QUALIGENS/ MERCK TO SPECN IS-695-1975 (2ND REVISION).PACK OF 2.5 LTRUMBER COLOUR BOTTLE WITH THREADED PLASTIC STOPPER. R Estab
Category : p
Grade : 3
Size : S
3658 M/s STALLION AUTO PARTS PVT. LTD.
D-3, UPSIDC INDUSTRIAL AREA, CHINHUT, DEWA ROAD, LUCKNOW LUCKNOW UTTAR PRADESH
PIN1 : 226019
Phone No. : 9935097081 		AACC50065J

Download 		1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) Bush Front to Drg. No. SK-9215/A for Rocket Pinaka Description : Bush Front to Drg. No. SK-9215/A for Rocket Pinaka() Specification : As per Drg. No. SK-9215/A C Estab
Category : p
Grade : 2
Size : S
3659 B.B. ENGINEERING
60/6, PANCHANANTALA ROAD, 1ST FLOOR PANCHANANTALA ROAD HOWRAH WEST BENGAL
PIN1 : 711101
Phone No. : 9432321551 		AHEPB4691D

Download 		1) Rifle Factory Ishapur

[ENR Registration]
Name Specification Use Status
1) UPPER BLOCK BARREL OF TEAR GAS GUN Description : UPPER BLOCK BARREL OF TEAR GAS GUN() Specification : As per drawing C Estab
Category : p
Grade : 3
Size : S
3660 POLYMARK INDUSTRIES
POLYMARK HOUSE, S. NO. 13/6A, NANDED INDUSTRIAL AREA, NEAR MANSI MINI MARKET PUNE MAHARASHTRA
PIN1 : 411041
Phone No. : 9822065085 		PNEA08776F

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 146 MM X 120 MM X 12 MM() Specification : IS:4671-1984 R Estab
2) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 265 MM X 146 MM X 12 MM() Specification : IS:4671-1984 R Estab
3) E.P.FOAM TYPE 2 DENS 15/20KG/M3 SIZE 275 MM X 142 MM X 12 MM() Specification : IS:4671-1984 R Estab
4) POLYSTRENE FOAM TYPE2, 275X142X6MM() Specification : IS:4671-1984 R Estab
5) PIECE PKG. POLYSTRINE 250X170X12MM() Specification : IS:4671_1984 R Estab
6) SEPERATOR OF POLY.FOAM 278X190X6MMT() Specification : IS-4671-1984 R Estab
7) END PKG PIECE 230X335X20MM POLYSTYRENE FOAM() Specification : IS:4671-1984 R Estab
8) PIECE PACKING THERMOCOL FRONT/REAR() Specification : DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6 R Estab
Category : p
Grade : 3
Size : S