1) BRASS ROD 23 MM BS 2872 CZ 128 LF 0711900023[07]()
Specification : BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.
R
Nonestab
2) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
3) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
R
Nonestab
4) BRASS ROD 11 MM BS 2874 CZ122 H LF 0712200012[07]()
Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H
R
Nonestab
5) BRASS ROD 4MM BSEN12166 CUZN35PB2 LF 0717501004[07]()
Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN
R
Nonestab
6) BRASS ROD 14 MM BS 2874 CZ124 LF 0711900014[07]()
Specification : BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).
R
Nonestab
7) BRASS ROD 4MM BSEN12166 CUZN39PB2 LF 0717501005[07]()
Specification : BRASS ROD 4MM BSEN12166 CUZN39PB2
R
Nonestab
8) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
9) BRASS ROD 6 35MM IS 319 GRD 1 HB LF 0711904006[07]()
Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.
R
Nonestab
10) BRASS ROD 9 5MM OD IS 319 89 GR 2 LF 0712100010[07]()
Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".
R
Nonestab
11) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
12) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008[07]()
Specification : BRASS ROD 8MM BS2874 CZ122 'M'
R
Nonestab
13) BRASS ROD 17MM BS2874 CZ121 PB3 LF 0712100933[07]()
Specification : BRASS ROD 17MM BS2874 CZ121 PB3
R
Nonestab
14) BRASS ROD 21MM BS2874 CZ122 M LF 0712202021[07]()
Specification : BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".
R
Nonestab
15) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
R
Nonestab
16) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
1) 0712500070 BRASS RD 70MM DIA IS 4170GR CUZN 40 [07]()
Specification : BRASS RD 70MM DIA IS:4170GR.CUZN-40
R
Estab
2) 0730200026 AL BRONZE 25 MM DIA ROD GOST 18175 [07]()
Specification : AL. BRONZE 25 MM DIA ROD,GOST 18175
R
Estab
3) 0730200060 ALUMINIUM BRONZE ROUND 60 MM DIA [07]()
Specification : ALUMINIUM BRONZE ROUND 60 MM DIA
R
Estab
4) 0730400028 AL BRONZE RD 28 MM DIA GOST 1628 78 [07]()
Specification : AL.BRONZE RD 28 MM DIA GOST 1628-78
R
Estab
5) 0730400038 AL BRONZE RD 38 MM DIA GOST 1628 78 [07]()
Specification : AL.BRONZE RD.38 MM DIA GOST-1628-78
R
Estab
6) 0730400040 AL BRONZE RD 40MM DIA GOST 1628 78 [07]()
Specification : AL.BRONZE RD 40MM DIA GOST 1628-78
R
Estab
7) 0730400058 ALUMINIUM BRONZE ROUND 58 MM DIA [07]()
Specification : ALUMINIUM BRONZE ROUND 58 MM DIA
R
Estab
8) 0731403045 AL BRONZE 45MM DIA SPCN BRAZH MTS [07]()
Specification : AL BRONZE 45MM DIA SPCN BRAZH MTS
R
Estab
9) 8730202056 AL BRONZE RD 56 MM DIA IS 6912 73 [87]()
Specification : AL.BRONZE RD.56 MM DIA IS 6912-73
R
Estab
Category : p
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION[07]()
Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT
R
Nonestab
Category :
Grade : Grade III
Size :
M
3382
TOTAL PRECISION
MTC/D-22 PANKI INDUSTRIAL AREA SITE-3 PANKI KANPUR Panki Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2690072
1) GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG
Description : GUIDE UPPER RIGHT IN WITHOUT HEAT TREATMENT CONDITION FOR MAG()
Specification : GUIDE UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 27011-SA DT- 14.01.2017.IN WITHOUT HEAT TREATMENT CONDITION.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE
Description : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE()
Specification : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE.
C
Estab
2) NUT RETAINING HANDLE for MAG
Description : NUT RETAINING HANDLE for MAG()
Specification : LOCKING PLATE AS PER DRG NO-161-697
C
Estab
12) STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148
Description : STRIP TO FGK DRG. NO. T-90/SK/0009 FOR STORE DRG. NO. 2A46M.02-148()
Specification : STRIP TO FGK DRG. NO.161-697
C
Estab
13) COVER CATCH
Description : COVER CATCH()
Specification : CATCH HOUSING AS PER DRG. NO. 166-256
C
Estab
14) SCREW
Description : SCREW()
Specification : LOCKING SCREW AS PER DRG NO. 161-697
C
Estab
15) CAP FOR SHARANG 161 473
Description : CAP FOR SHARANG 161 473()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category : s
Grade : 3
Size :
S
3383
HARI NARAYAN BIHANI
S-2 USHA PLAZA III FLOOR, OPP. ALL INDIA RADIO, M-I ROAD, U.P. INDIA - JAIPUR RAJSHTHAN
PIN1 : 302001
Phone No. : 0141-2378988
Specification : COPPER BALL 3.175 MM +/-0.051 TO DRG. PT. NO. QX-159 DC NO 35639-A DT 28/12/93.
R
Estab
2) BAR TO DRG NO F1301 050950 D LF 9911334375
Description : BAR TO DRG NO F1301 050950 D LF 9911334375()
Specification : BAR TO DRG NO F1301-050950-D DC(I) 35049-A DT 14/03/91 SPECN:- F-1301-902840-B DT 14/06/85.
R
Estab
3) PLUG FIRING REPRESENTING TRACER AND IGNITAR SHELL NO 14 MARK N2 LF 9911357522
Description : PLUG FIRING REPRESENTING TRACER AND IGNITAR SHELL NO 14 MARK N2 LF 9911357522()
Specification : DRG.NO. NAD 2037 R.NO. NIL DT. 28-5-04
C
Estab
4) MAGAZINE BODY 011 FOR MULTIMODE GRD LF 9911357581
Description : MAGAZINE BODY 011 FOR MULTIMODE GRD LF 9911357581()
Specification : AS PER SPECIFIED DRG.
C
Estab
5) PLUNGER 012 FOR MULTIMODE GRD LF 9911357582
Description : PLUNGER 012 FOR MULTIMODE GRD LF 9911357582()
Specification : AS PER SPECIFIED DRG.
C
Estab
6) RIVET 016 FOR MULTIMODE GRD LF 9911357586
Description : RIVET 016 FOR MULTIMODE GRD LF 9911357586()
Specification : AS PER SPECIFIED DRG.
C
Estab
7) SHUTTER SCREW 018 FOR MULTIMODE GRD LF 9911357588
Description : SHUTTER SCREW 018 FOR MULTIMODE GRD LF 9911357588()
Specification : AS PER SPECIFIED DRG.
C
Estab
8) STOPPER PIN 019 FOR MULTIMODE GRD LF 9911357589
Description : STOPPER PIN 019 FOR MULTIMODE GRD LF 9911357589()
Specification : AS PER SPECIFIED DRGS.
C
Estab
9) PLUNGER SPRING 029 FOR MULTIMODE GRD LF 9911357602
Description : PLUNGER SPRING 029 FOR MULTIMODE GRD LF 9911357602()
Specification : AS PER SPECIFIED DRG.
C
Estab
10) CONICAL SPRING 030 FOR MULTIMODE GR LF 9911357603
Description : CONICAL SPRING 030 FOR MULTIMODE GR LF 9911357603()
Specification : AS PER SPECIFIED DRG.
C
Estab
11) STOPPER SPRING 032 FOR MULTIMODE GRD LF 9911357605
Description : STOPPER SPRING 032 FOR MULTIMODE GRD LF 9911357605()
Specification : AS PER SPECIFIED DRG.
C
Estab
12) TRANSIT PIN 035 FOR MULTIMODE GRD LF 9911357613
Description : TRANSIT PIN 035 FOR MULTIMODE GRD LF 9911357613()
2) CAP AND LOCK BOTTOM F1301-905060-P (2013998518)
Description : CAP AND LOCK BOTTOM F1301-905060-P (2013998518)()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
C
Estab
3) CAP AND BOTTOM SPECN: F1301-905060-P (9911350158)
Description : CAP AND BOTTOM SPECN: F1301-905060-P (9911350158)()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
Specification : PLASTIC CONTAINER NO.P-16 EMPTY ASSY.TO DRG.PT NO:TRD-1464/1 ALONGWITH (i)BODY TO DRG. NO. TRD-1465b(ii) LID TO DRG NOTRD-1466b(iii) GASKET TO DRG. NO: TRD-1467a(iv) LABEL TO DRG NO. TRD-1482a
R
Estab
5) SUPPORT TO DRG NO 121959 LF 9911357665
Description : SUPPORT TO DRG NO 121959 LF 9911357665()
Specification : SUPPORT TO DRG NO.TRD 121959 FOR CONTAINER 125MM FSAPDS(IMI)
R
Estab
6) CONTAINER P-10B FOR CARTG PK-3 & PV35 (9911358092)
Description : CONTAINER P-10B FOR CARTG PK-3 & PV35 (9911358092)()
Specification : CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TOD
1) LEAD SHEET 19X0.5MM IS405 PT.II (0800160106)
Description : LEAD SHEET 19X0.5MM IS405 PT.II (0800160106)()
Specification : LEAD SHEET 19+/-0.50 MM WIDE X 0.5+/-0.10 MM THICK IN ROLLED CONDITION. SPECN:- IS-405-(PT-II)-1992 (THIRD REVISION) INCOILS WEIGHT 5 KG MAXIMUM, I/D = 25 MM MINIMUM & O/D = OPEN
R
Estab
2) LEAD SHEET 50X2MM IS:405 PT.II-1992 (0800160901)
Description : LEAD SHEET 50X2MM IS:405 PT.II-1992 (0800160901)()
Specification : LEAD SHEET 50+/-0.635 MM WIDE X 2+/- 0.05 MM THICK TO SPECN:IS-405 (PT-II)-1992 (3RD REVISION) IN ROLLED CONDITION
R
Estab
3) LEAD SHEET 28X0.5MM IS:405 PT.II (0800560902)
Description : LEAD SHEET 28X0.5MM IS:405 PT.II (0800560902)()
Specification : LEAD SHEET 28+/- 1 MM WIDE X 0.50+/-0.10 MM THICK IN ROLLED CONDITION SPECN:-IS-405 (PT-II)-1992 (3rd REVISION) IN COILOF WEIGHT 2 TO 2.5 KG, I/D OF COIL 70 TO 75 MM
R
Estab
4) LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005
Description : LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005()
Specification : LEAD PIG ORDINARY (FLAT) 500 MM LONG X 100 MM WIDE X 70 MM THICK IN WEIGHT OF 30KG,Pb-99.99% TO SPECN.IS-27-1992(FOURTH REVISION)(REAFFIRMED 2014)(AMENDMENT NO1 APRIL 1998)(AMENDMENT NO2 DECEMBER 2010).
R
Estab
5) WIRE LEAD ANT 5.66TO 5.74MM JSS9530 (0811200005)
Description : WIRE LEAD ANT 5.66TO 5.74MM JSS9530 (0811200005)()
Specification : LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS.
R
Estab
6) LEAD SEAL 10 MM DIA LF 1861901001
Description : LEAD SEAL 10 MM DIA LF 1861901001()
Specification : LEAD SEAL 10 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2003)
R
Estab
7) LEAD SEAL 12 MM LF 1861901301
Description : LEAD SEAL 12 MM LF 1861901301()
Specification : LEAD SEAL 12 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2018)
1) LPTA A SET OF ASSY SPRING F REAR
Description : LPTA A SET OF ASSY SPRING F REAR()
Specification : A SET OF ASSY.SPRING FRONT & REAR CONSISTING OF 1 NO.OF ASSY FRONT SPRING (DRG.NO.2154-3210-0401V5)NON DRIVERS SIDE TO PART.NO.2154-3210-0101,1NO.OF DRIVERS SIDE(DRG.NO.2154-3210-0401V5)PT.NO.2154-3210-0102 AND 2NOS OF ASSY.REAR SPRING TO
Specification : PRESSED WOOL FELT GENERAL PURPOSE TYPE MEDIUM FIRM PROOFED SIZE- 1320 MM WIDE X 10 MM THICK COLOUR WHITE CONFORMING TO PHYSICAL & CHEMICAL REQUIREMENTS TO SPECN. IS: 1719 -2000FOURTH REV.,PROOFED WITH DI-NITRO ALPHA NAPHTHOL MIN 0.25% &
R
Estab
3) 2101272151 FELT WOOL MEDIUM HARD 10 X1320 MM
Description : 2101272151 FELT WOOL MEDIUM HARD 10 X1320 MM()
Specification : IS:1719- 2000
R
Estab
4) 2101990535 FELT WOOL MEDIUM HARD 3 X1320 MM
Description : 2101990535 FELT WOOL MEDIUM HARD 3 X1320 MM()
Specification : IS:1719-2000
R
Estab
5) 2101990541 FELT WOOL MEDIUM HARD
Description : 2101990541 FELT WOOL MEDIUM HARD()
3) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)
Description : TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.
C
Estab
4) SHUTTER 027 FOR MULTIMODE GRD LF 9911357611
Description : SHUTTER 027 FOR MULTIMODE GRD LF 9911357611()
Specification : AS PER SPECIFIED DRG.
R
Estab
5) TOP PLATE 028 FOR MULTIMODE GRD LF 9911357612
Description : TOP PLATE 028 FOR MULTIMODE GRD LF 9911357612()
Specification : AS PER SPECIFIED DRG.
R
Estab
6) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)
Description : MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Estab
7) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)
Description : SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Estab
8) SPIRAL NAI LF 9911358044
Description : SPIRAL NAI LF 9911358044()
Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN
Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO
R
Estab
5) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)
Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120
R
Estab
9) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)
Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)()
Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
R
Estab
10) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)
Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)()
Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification : COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification : COPPER ALLOY STRIP 15.875+_0.5 MM WIDE X 0.457+_0.025 MM THICK LENGTH OF 3 METERS MIN. IN COILS TO SPECN:-IS:3167 OF1982 (REAFFIRMED-DEC.1998)(FIST REVISION) CONDITION ANNEALEDHARDNESS 65-85 VPN.
R
Estab
13) BRASS STRIP 25.4X0.63 MM (0717560949)
Description : BRASS STRIP 25.4X0.63 MM (0717560949)()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
Specification : BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
R
Estab
Category : p
Grade : 3
Size :
S
3398
HIND HARDWARE AND TOOLS AGENCY
17 SAGAR DUTTA LANE KOLKATA WEST BENGAL
PIN1 : 700073
Phone No. : 07612743368
1) WIRE GI 0.90MM/20SWG IS280 HARD (0133013091)
Description : WIRE GI 0.90MM/20SWG IS280 HARD (0133013091)()
Specification : WIRE IRON GALVANISED (20 SWG) 0.90 MM TO SPECN.IS 280-1978 (REAFFIRMED-1997) (THIRD REV.)WITH AMENDMENT NO.1 JULY 1984& AMENDMENT NO.2 APRIL 2002 WITH UTS-550-825 MPa-MAX (HARDCONDITION)
R
Estab
2) WIRE GI 18 LF 0133013122
Description : WIRE GI 18 LF 0133013122()
Specification : WIRE IRON GALVANISED 18 SWG (1.25 MM DIA) SPECN:IS-280-1978 (THIRD Revision) (REAFFIRMED-1997) WITH AMENDMENT NO.1 JULY1984 AND NO.2 APRIL 2002 WITH UTS-550-825 MPa (MAX) HARDCONDITION.
Specification : COPPER TACKS 1/2" LENGTH X 1.5 MM DIA.
R
Estab
10) WIRE MESH GI LF 1757736007
Description : WIRE MESH GI LF 1757736007()
Specification : GALVANISED IRON WIRE MESH, SIZE 2.5 X 2.5 MM, 914 MM WIDE WIRE DIA 0.5MM TO SPECN IS-280-1978 (3rd REVISION)REAFFIRMED-1997 AMDT.NO.1 JULY 1984 AND AMDT NO.2 APRIL 2002 CONDITIONANNEALED SOFT DRAWN
1) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)
Description : STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Estab
2) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)
Description : STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Estab
3) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)
Description : STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Estab
4) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)
Description : STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Estab
5) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)
Description : STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Estab
6) MS ROD 64MM IS-1570 GR.25C4 (0133005064)
Description : MS ROD 64MM IS-1570 GR.25C4 (0133005064)()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Estab
7) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)
Description : STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
R
Estab
8) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)
Description : STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
R
Estab
9) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)
Description : STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)()
Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18.
R
Estab
10) STEEL ROD 32MM 50-TY-14-1-2884-80 (0187100032)
Description : STEEL ROD 32MM 50-TY-14-1-2884-80 (0187100032)()
Specification : STEEL ROD 32(+0.00/-0.10)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTR.TO SPECN: STEEL GRADE 50 TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES AS PER SPECN NO. ML 002 SHT. 1 OF 1 REVISION NO. 2 DATED 10-5-96
R
Estab
11) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)
Description : STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)()
Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 .
