Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
Category : dp
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) COPPER TUBE 35mm OD X2 POINT 5 mm
Description : COPPER TUBE 35mm OD X2 POINT 5 mm()
Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT
Specification : TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]()
Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) BRASS TUBE M 10583B TO SPEC JSS 9535 02 1995 REV NO1 UN ANNEALED AND STRESS RELIEVED FOR PR 18A MAGAZINE DRG NO IQX 192
Description : BRASS TUBE M 10583B TO SPEC JSS 9535 02 1995 REV NO1 UN ANNEALED AND STRESS RELIEVED FOR PR 18A MAGAZINE DRG NO IQX 192()
Specification : BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UN ANNEALED AND STRESS RELIEVED
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) Brass Round
Description : Brass Round()
Specification : AS PER SPECIFICATION
R
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) Brass Round
Description : Brass Round()
Specification : AS PER SPECIFICATION
R
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) BRASS TUBE
Description : BRASS TUBE()
Specification : BRASS TUBE TO SIZE : O/D 9.53+/-0.076MM X 0.71MM WT IN MULTIPLE LENGTH OF 115MM TO SPECN. IS:407-1966 ALLOY-1 IN ANNEALED CONDITION OF STD. FOR CENTRAL TUBE
(DRG. NO. ARM-1099C4 ITEM NO.19)
R
Estab
Category : p
Grade : 3
Size :
S
3342
Aflon Engineering Corporation (A Unit of Aflon Engineering Pvt. Ltd.)
City Mills Compound Kankaira Road Ahmedabad Gujarat
PIN1 : 380022
Phone No. : 25467593
GSTIN : 24AABCA9993J1Z8
1) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314
Description : paint ready mixed air drying matt finish for general purpose olive green item code 1011509314()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification : AS PER SPECIFICATION
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification : Drg No HE-5036/B Dated 26/07/2018) (25 Kg capacity for filling of 25 Kg TNT)
P
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE BAG CCL70
Description : POLYTHENE BAG CCL70()
Specification : JSS:9339-03-2014 REV.NO.3
E
Estab
2) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE
Description : POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE()
Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED
E
Estab
3) POLYTHENE BAG RW142
Description : POLYTHENE BAG RW142()
Specification : JSS;9339-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1.
E
Estab
4) POLYTHENE BAG FOR 130 MM CARTRIDGE CASE
Description : POLYTHENE BAG FOR 130 MM CARTRIDGE CASE()
Specification : POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1.
E
Estab
5) TRANSIT PLUG FOR RW 244 CARTG CASES
Description : TRANSIT PLUG FOR RW 244 CARTG CASES()
Specification : JSS:9339-03-2014, REV NO. 3, LDPE GRADE TYPE 2.
Specification : ALKATHENE LINER 500 GAUGE(0.127 MM+ OR - 10%) THICK POLYTHENE TUBE 900 MM WIDE AND 1200 MMLENGTH WHEN LAID FLAT BOTTOM FLATTENED AND SEAMED SECURELYBY FUSION BONDING.DRG.NO OFI/2005/NC/164.
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Itarsi
[ENR Registration]
Name
Specification
Use
Status
1) Bag Polythene
Description : Bag Polythene()
Specification : JSS-9330-03 1995 REV. NO. 1 DC NO. 3490 ME DTD. 14.01.98
R
Estab
2) Bag HDPE Woven With Polythene Liner
Description : Bag HDPE Woven With Polythene Liner()
Specification : ALKATHENE LINER 500 GAUGE(0.127 MM+ OR - 10%) THICK POLYTHENE TUBE 900 MM WIDE AND 1200 MMLENGTH WHEN LAID FLAT BOTTOM FLATTENED AND SEAMED SECURELYBY FUSION BONDING.DRG.NO OFI/2005/NC/164.
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Machine Tool Proto Type Factory
[ENR Registration]
Name
Specification
Use
Status
1) 7119049000 CORRUGATED PACK BOX FOR BOAT TAIL
Description : 7119049000 CORRUGATED PACK BOX FOR BOAT TAIL()
Specification : CORRUGATED PACK.BOX FOR BOAT-TAIL
P
Estab
2) 7119070882 MUZZLE TUBE COVER SR LAUCHER ASSY
Description : 7119070882 MUZZLE TUBE COVER SR LAUCHER ASSY()
Specification : MUZZLE TUBE COVER SR LAUCHER ASSY.
P
Estab
3) 7118000090 CORROGATED PACKING BOX FOR 81MM BOM
Description : 7118000090 CORROGATED PACKING BOX FOR 81MM BOM()
Specification : CORROGATED PACKING BOX FOR 81MM BOM
3) 1565170525 BAND PVC PLASTIC
Description : 1565170525 BAND PVC PLASTIC()
Specification : IS: 9766-1992
R
Estab
4) 1565170625 BAND PVC PLASTIC 25 MM X 1.0 MM TH.
Description : 1565170625 BAND PVC PLASTIC 25 MM X 1.0 MM TH.()
Specification : PVC PLASTIC BAND (WHITE) SIZE - 25 MM WIDE X 0.5 MM THICK +-0.1 MM SPECN. IS: 9766 -1992 (FIRST REV.) CLASS I, TYPE 'A', MATERIAL FLEXIBLE PVC COMPOUND CONFIRMING TO ABOVE SPECIFICTION.
9) 2199641002 WASHER A B FOR CONTAINER 39A
Description : 2199641002 WASHER A B FOR CONTAINER 39A()
Specification : JSS 9330-03-1995
C
Estab
10) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM
Description : 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM()
Specification : SPECN. NO. JSS 9330- 03
C
Estab
11) 6043000210 BOMB BODY 81MM MOR C EMP ITV 9A
Description : 6043000210 BOMB BODY 81MM MOR C EMP ITV 9A()
Specification : CQA(A) 2305(M)
C
Estab
12) 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC
Description : 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC()
Specification : JSS 9330-01.
C
Estab
13) 6070648998 SLEEVE MAG IQX 831FOR PRIMER 18 A
Description : 6070648998 SLEEVE MAG IQX 831FOR PRIMER 18 A()
Specification : SLEEVE MAGAZINE FOR PRIMER 18A.
C
Estab
14) 6070750330 SLEEVE IQX 849 ARDE 1807 PRI 19A&B
Description : 6070750330 SLEEVE IQX 849 ARDE 1807 PRI 19A&B()
Specification : SLEEVE, MAT.:CELLULOID TO DRAWING PART NO.IQX-849,DC 36681-A DTD.29-05-2000 FOR PRIMER 19B
C
Estab
15) 6070751183 LINER CELLULOID IQX848 FOR PRI 19B
Description : 6070751183 LINER CELLULOID IQX848 FOR PRI 19B()
Specification : LINER,MATL:CELLULOID TO DRAWING NUMBER IQX-848,DC 36785-A DATED 08/10/2001 FOR PRIMER 19B.
C
Estab
16) 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.
Description : 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.()
Specification : SPECN. IA 1285(B
C
Estab
17) 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC
Description : 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC()
Specification : HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A
C
Estab
18) 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP
Description : 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP()
Specification : NYLON RING TO DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50 DC- 36257-A. DT.14-3-97.
C
Estab
19) 6273200026 OBTURATOR TO DRG NO CQA 155 1140
Description : 6273200026 OBTURATOR TO DRG NO CQA 155 1140()
Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).
C
Estab
20) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB
Description : 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB()
Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)
C
Estab
21) 6330600190 RING SEALING DRG.3-016919 DET-52
Description : 6330600190 RING SEALING DRG.3-016919 DET-52()
Specification : SPECN.JSS 4720-02
C
Estab
22) 6419000014 PLUG TO DRG.NO ISX-393 FOR 125MM HE
Description : 6419000014 PLUG TO DRG.NO ISX-393 FOR 125MM HE()
Specification : PLUG (PLASTIC)
C
Estab
23) 6432300003 TEFLON SHT ERA PANEL
Description : 6432300003 TEFLON SHT ERA PANEL()
Specification : PLUG FUZE HOLE 50.8 MM 2A (PLASTIC)
C
Estab
27) 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15
Description : 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15()
Specification : SLEEVE, PART NO. 2-17 DRG.NO.3-024045, 3B15, DC 36767-A, MATL: TYPE NYLON-66 TO SPECN. DEF STAN 93-8/1 (LATEST ISSUE) WITH ELECTRICAL PROPERTIES & IMPACT STRENGTH AS PER GOST.10589-73
C
Estab
28) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117
Description : 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117()
Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL.
C
Estab
29) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A
Description : 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A()
Specification : SPECN.NO. CQA(A) 2804
C
Estab
30) 6571523799 WASHER POLY ISV 1465 FOR CON 63A
Description : 6571523799 WASHER POLY ISV 1465 FOR CON 63A()
Specification : POLYTHENE WASHER TO DRG.PART NO. ISV 1465 DC NO. 30799-A(FOR AMMN. CONTAINER 63A) , MATL:- HDPE TYPE-ISPECN.NO. JSS 9330-03 DC NO. 3490-ME.
C
Estab
31) 6572129006 CONTAINER 38 B WITHOUT FITMENTS
Description : 6572129006 CONTAINER 38 B WITHOUT FITMENTS()
Specification : DISC, CLOSED CELL CROSS LINKED POLYETHYELENE FOAM(CAP CELL) 46.5 MM DIA X 6 MM THICK DES.REF NO.CQA(A)/AMN/3042 DRG. NO. ISV-2017, DC.NO.36449A DT.30.07.98 DETAIL NO.2 FOR CONTAINER 38 B.
1) 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A
Description : 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A()
Specification : CONTAINER WITH DISC TO DRG.PT.NO.ITV 21 DC 36747-A SPECN. NO. CQA(A) 2303(F) DC 36747-A FOR BOMB 120 MM MORTAR.MATERIAL:-NYLON REINFORCED (BACKED) CELLULOID SHEET. COLOURED RATIO:--RED: LIGHT BLUE:: 4 : 3. PACKING AS PER DRAWING NUM
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE BAG
Description : POLYTHENE BAG FOR 84MM C.G CC()
Specification : JSS :9330-03:2014 REV. NO.3
E
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Ambernath
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE
Description : POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG. CASE()
Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED
E
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Equipment Factory Hazaratpur
[ENR Registration]
Name
Specification
Use
Status
1) Description : SELF SEALING POLYTHENE BAG OF DIFFERENT DIMENSIONS()
Specification : SOAP SOFT IN THE FORM OF FLAKES TO DGQA SPCN IND/SL/3021 (C) PACKED IN WATER PROOF BAGS OF 20 KG CAPACITY, FOR LUBRICATION IN DEEP DRAW PROCESS OF VARIOUS TYPES OF CARTG.CASES & CUPS.
