List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2901 KAILASH ENTERPRISES
NEAR MARIMATA MANDIR KAILASH ENTERPRISES BHUSAWAL NEAR MARIMATA MANDIR BHUSAWAL Maharashtra
PIN1 : 425201
Phone No. : 9422276199
GSTIN : 27AAHPC7544G1ZR 		AAHPC7544G

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) ARC WELDING ELECTRODE[99]() Specification : ARC WELDING ELECTRODE - ER 4211X AS PER IS:814-2004 AWS/A5.1 E-6013 CURRENT CONDITION, IS CLASSIFICATION IS:814:2004 WITH CURRRENT CONDITION USE AS AC50 OR DC +/-AMP DIA :-3.15 (+/- 0.05)MM,LENGHT :-450.0(+/- 6.0)MM WITH MEDIUM COATING UP P Estab
Category : s
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) RIVET MS FLAT 4 X 10 MM Description : RIVET MS FLAT 4 X 10 MM() Specification : RIVET MS FLAT 4 X 10 MM C Estab
2) RIVET MS FLAT HD 5 X 12 MM Description : RIVET MS FLAT HD 5 X 12 MM() Specification : RIVET MS FLAT HD 5 X 12 MM C Estab
3) S.M. FLAT 5 X 25 MM TO IS-1079-94 Description : S.M. FLAT 5 X 25 MM TO IS-1079-94() Specification : S.M. FLAT 5 X 25 MM TO IS-1079-94 C Estab
4) SOLDERING WORK OF STD CASSETTE Description : SOLDERING WORK OF STD CASSETTE() Specification : SOLDERING WORK OF STD CASSETTE P Estab
5) WEBBING COTTON O.G.2.5MM THICK Description : WEBBING COTTON O.G.2.5MM THICK() Specification : WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- T P Estab
6) WEBBING COTTON SIZE 3.00X25MM. Description : WEBBING COTTON SIZE 3.00X25MM.() Specification : WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR R Estab
7) ALL TYPES OF FABRICATION WORK FOR AMMN. BOXES Description : ALL TYPES OF FABRICATION WORK FOR AMMN. BOXES() Specification : AS PER DRG./SPECIFICATION R Estab
8) ASSISTANCE OF LABOURS FOR PROD SECTION Description : ASSISTANCE OF LABOURS FOR PROD SECTION() Specification : ASSISTANCE OF LABOURS FOR PROD SECTION AS PER ANNEXURE P Estab
9) FABRICATION OF BOX SM171L Description : FABRICATION OF BOX SM171L() Specification : FABRICATION OF BOX SM-171-L. P Estab
10) FABRICATION OF MOD601SM 105 Description : FABRICATION OF MOD601SM 105() Specification : FABRICATION OF MOD.601/SM 105 P Estab
11) FABRICATION SERVICES BOX C43A Description : FABRICATION SERVICES BOX C43A() Specification : FABRICATION SERVICES BOX C-43A P Estab
12) PAINTING VARNISHING OF D4C Description : PAINTING VARNISHING OF D4C() Specification : PAINTING & VARNISHING OF D4C P Estab
13) PAINTING SERVICES OF CYL533 Description : PAINTING SERVICES OF CYL533() Specification : PAINTING SERVICES OF CYL-533 P Estab
14) PHOSPHATING PAINTING BOX C51 Description : PHOSPHATING PAINTING BOX C51() Specification : PHOSPHATING &PAINTING BOX C-51 P Estab
15) PROCOF POWDR COATED BOX SM105 Description : PROCOF POWDR COATED BOX SM105() Specification : PROC.OF POWDR COATED BOX SM105 P Estab
16) PROCESSING ALONGWITH WELD TRA Description : PROCESSING ALONGWITH WELD TRA() Specification : PROCESSING ALONGWITH WELD. TRA P Estab
17) PROCESSING FABRICATION SM642 Description : PROCESSING FABRICATION SM642() Specification : PROCESSING FABRICATION SM-642 P Estab
18) PROCESSING FOR AMMNBOX SM51 Description : PROCESSING FOR AMMNBOX SM51() Specification : PROCESSING FOR AMMN.BOX SM-51 P Estab
19) PROCESSING FOR BOX SM 642 D Description : PROCESSING FOR BOX SM 642 D() Specification : PROCESSING FOR BOX SM-642-D P Estab
20) PROCESSING OF CYLINDER 12A Description : PROCESSING OF CYLINDER 12A() Specification : PROCESSING OF CYLINDER 12A P Estab
21) PROCESSING OF AMMN CONT BOX 43 Description : PROCESSING OF AMMN CONT BOX 43() Specification : PROCESSING OF AMMN.CONT.BOXC43 P Estab
22) PROCESSING OF BOX 601 MODIFIED Description : PROCESSING OF BOX 601 MODIFIED() Specification : PROCESSING OF BOX 601 MODIFIED P Estab
23) PROCESSING OF BOX C 43A AT PCP Description : PROCESSING OF BOX C 43A AT PCP() Specification : PROCESSING OF BOX C-43A AT PCP P Estab
24) PROCESSING OF CARRIER 13A Description : PROCESSING OF CARRIER 13A() Specification : PROCESSING OF CARRIER 13A P Estab
25) PROCESSING OF CARRIER 6A Description : PROCESSING OF CARRIER 6A() Specification : PROCESSING OF CARRIER 6A P Estab
26) PROCESSING OF CARRIER 7A Description : PROCESSING OF CARRIER 7A() Specification : PROCESSING OF CARRIER 7A P Estab
27) PROCESSING OF PHOS PAINTING 53 Description : PROCESSING OF PHOS PAINTING 53() Specification : PROCESSING OF PHOS.PAINTING 53 P Estab
28) PURCHASE OF CO2 GAS CYLINDER Description : PURCHASE OF CO2 GAS CYLINDER() Specification : PURCHASE OF CO2 GAS CYLINDER P Estab
29) RIVETING OF ASSLY CARRIER 13A Description : RIVETING OF ASSLY CARRIER 13A() Specification : RIVETING OF ASSLY. CARRIER 13A P Estab
30) RIVETING OF CARRIER 13A Description : RIVETING OF CARRIER 13A() Specification : RIVETING OF CARRIER 13A P Estab
31) SERVICES FOR AMMNCONT SM 601 Description : SERVICES FOR AMMNCONT SM 601() Specification : SERVICES FOR AMMN.CONT SM-601 P Estab
32) SERVICES FOR AMMN CONT BOX 651 Description : SERVICES FOR AMMN CONT BOX 651() Specification : SERVICES FOR AMMN.CONT.BOX 651 P Estab
33) SERVICES FOR BOX H2A NEW Description : SERVICES FOR BOX H2A NEW() Specification : SERVICES FOR BOX H2A (NEW) P Estab
34) SOLDERING PAINTING SERVICES Description : SOLDERING PAINTING SERVICES() Specification : SOLDERING & PAINTING SERVICES P Estab
35) SOLDERING SERVICES FOR CYL 533 Description : SOLDERING SERVICES FOR CYL 533() Specification : SOLDERING SERVICES FOR CYL-533 P Estab
36) UPKEEP MAINTENANCE OF ETP Description : UPKEEP MAINTENANCE OF ETP() Specification : UPKEEP & MAINTENANCE OF ETP P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911844035 WOOD PACKING 215 X178X 25MM Description : 9911844035 WOOD PACKING 215 X178X 25MM() Specification : AS PER SPECIFICATION C Estab
Category : p
Grade : 3
Size : S
2902 HYDERABAD PRECISION MFG CO PVT LTD
B-16 TECHNOCRATS INDUSTRIAL ESTATE, PHASE-II, BALANAGAR, HYDERABAD - 500037 BALANAGAR HYDERABAD Telangana
PIN1 : 500037
Phone No. : 23079149 		AAACH4979A

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA Description : SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA() Specification : SAFE AND ARMING DEVICE M9040A1 ASSY. OF FUZE PDM9030A1 AS PER OFAJ DRG. NO. FS-2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA C Estab
Category : ddp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630() Specification : NAI(J) 501/6/3(P) FOR Fz DASD AK-630 C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6044000600 TAIL UNIT 2A Description : 6044000600 TAIL UNIT 2A() Specification : SPECN NO. CQA(A)2342 C Estab
2) 6120900102 FIN ASSLY WITH BAND FOR 125MM HE 1A Description : 6120900102 FIN ASSLY WITH BAND FOR 125MM HE 1A() Specification : FIN ASSEMBLY TO DRAWING NO.4-024610 DETAIL NO.30 DC 36892-A.DT.12/04/2003 FOR 125 MM HE AMMUNITION. C Estab
3) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT Description : 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT() Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04 C Estab
4) 6330130100 FZ 117 DA MK 20 E WITH CAP Description : 6330130100 FZ 117 DA MK 20 E WITH CAP() Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3. C Estab
5) 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7 Description : 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7() Specification : STRIKER MECHANISM DRG.NO.3-016919,53-B-025Y,CD-7,DC-34920-A DT.23-7-90 EXCEPT SUB ASSEMBLY CD-6 AND ITEM DETAIL 53 FOR FUZE B 429E/B 429. C Estab
6) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY Description : 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY() Specification : SPECN. NO. CQA(A) 0917 C Estab
7) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC Description : 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC() Specification : PRIMER ELECTRIC 1A/L EMPTY C Estab
8) 6380600100 PRIMER 18 A EMPTY Description : 6380600100 PRIMER 18 A EMPTY() Specification : PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY. C Estab
9) 6380608100 PRIMER 19B EMPT IQX 71 GE Description : 6380608100 PRIMER 19B EMPT IQX 71 GE() Specification : SPECN.NO.CIA 3102 C Estab
10) 6410900120 COVER OF OBTURATOR DET 10 Description : 6410900120 COVER OF OBTURATOR DET 10() Specification : COVER OF OBTURATOR TO DRG.NO.3-027321 DET.NO.10 DC-36050-ADT.5/12/95 FOR PRIMER GUV-7. C Estab
11) 6410900130 CLAMPING NUT AND BASE ASSY DET 12 13 Description : 6410900130 CLAMPING NUT AND BASE ASSY DET 12 13() Specification : CLAMPING NUT DRG. NO. 3-027321 DETAIL NO. 12 DC 36050-A ANDBASE DRG.NO.3-027321 DET. NO. 13 DC 36050-A FOR PRIMER GUV-7IN ASSEMBLED CONDITION AS PER DRG. NO. 3-027321/4B2/CD4. C Estab
12) 6410900140 CLAMPING BUSH DET 15 PRIMER GUV 7 Description : 6410900140 CLAMPING BUSH DET 15 PRIMER GUV 7() Specification : CLAMPING BUSH TO DRG.NO.3-027321, DETAIL NO.15 DC 36050-AFOR PRIMER GUV-7 C Estab
13) 6410900880 CUP FOR PRIMER GUV-7 Description : 6410900880 CUP FOR PRIMER GUV-7() Specification : DRG.NO.3-027321, C Estab
14) 6410900900 OBTURATING DEVICE ASSEMBLY CD1 Description : 6410900900 OBTURATING DEVICE ASSEMBLY CD1() Specification : OBTURATING DEVICE TO DRG NO.3-027321 DET.NO.CD1 DC NO.35893-A CONSISTS OF 1) SCREW DET.NO.1 DC NO.35802-A2) CONICAL SHUTTER DET.NO.2 DC NO.35802-A 3) BUSH DET.NO.3DC NO. 35802-A 4) RING DET.NO.25 DC NO.36050-A (WITHOUTPAPER DISC DET.NO.4 C Estab
15) 6410900990 OBTURATOR DET NO 8 PRIMER GUV 7 Description : 6410900990 OBTURATOR DET NO 8 PRIMER GUV 7() Specification : OBTURATOR TO DRG.NO.3-027321, DETAIL NO.8, DC-36050-ADT.05-12-95 FOR PRIMER GUV-7. C Estab
16) 6419000027 PRIMER GUV 7 E COMPLETE FOR 125MM Description : 6419000027 PRIMER GUV 7 E COMPLETE FOR 125MM() Specification : EMPTY COMPONENTS OF PRIMER GUV-7, CONSISTING OF BODY TO DRGNO. 3-027321 DET 5, CUP DET 7, OBTURATOR DET 8, COVER OFOBTURATOR DET 10, CLAMPING BUSH DET 15, PACKING RING DET 6,CLAMPING NUT & BASE ASSLY DET CD4 AND OBTURATING DEVICE C C Estab
Category : p
Grade : 3
Size : S
2903 K E Alloys P Ltd
3/244, Vishnu Puri Vishnu Puri Kanpur Uttar Pradesh
PIN1 : 208002
Phone No. : 2340133
GSTIN : 09AAHCS9963Q1Z4 		KNPK01383E

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) STAINLESS STEEL PLATE 316 PER ASTM A 240 PLATE SIZE 56 TX 90L X 110 W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[03]() Specification : STAINLESS STEEL PLATE 316 PER ASTM A 240. PLATE SIZE 56 TX 90L X 110W (IN MM) ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG R Nonestab
2) ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 12T X 90L X 80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]() Specification : ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE-AMS-6345. PLATE SIZE: 12T X 90L X 80W (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.FOR SRCG. R Nonestab
3) Copper Alloy Bar C90700 Tin branze alloy per SAE 65 or ASTM B505 size dia 28 mm All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted[07]() Specification : Copper Alloy Bar C90700 (Tin branze alloy) per SAE 65 or ASTM B505 size dia 28 mm. All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted. R Nonestab
4) STEEL ALLOY BAR SAE 4130 PER SAE AMS S 6758 OR SAE 4340 PER SAE AMS S 5000 ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED for SRCG[02]() Specification : STEEL ALLOY BAR SAE 4130 PER SAE-AMS-S-6758 OR SAE 4340 PER SAE-AMS-S-5000. ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. for SRCG R Nonestab
5) ALLOY STEEL PLATE THICK 16 MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 16T X 90L X80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]() Specification : FOR ALLOYSTEELPLATETHICK16MMSAE4130PERSAE-AMS-6345. PLATE SIZE: 16T X 90L X80W (IN MM). ALLRELEVANTTESTCERTIFICATEFROMNABLLABTO BE SUBMITTED.FORSRCG R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur
Name Specification Use Status
1) PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993[07]() Specification : PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993 R Estab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SQUARE DRAWN 1 upon 4 Inch ROD FOR FIRING DEVICE[01]() Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H R Nonestab
2) STEEL STRIP FOR FIRING DEVICE[01]() Specification : STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD) R Nonestab
3) SS WIRE ROD DIA 10MM[01]() Specification : SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10 R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SQUARE DRAWN ROD FOR FIRING DEVICE Description : SQUARE DRAWN ROD FOR FIRING DEVICE() Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H R Estab
2) STEEL SQR 37MM FOR MAG Description : STEEL SQR 37MM FOR MAG() Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION R Estab
3) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 Description : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19() Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).() Specification : SPECIFICATION IS:513-(LATEST ISSUE). R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).() Specification : SPECIFICATION IS:513-(LATEST ISSUE). R Estab
2) STEEL RD 8MM DIA FOR MAG Description : STEEL RD 8MM DIA FOR MAG() Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C R Estab
3) ST STRIP Description : ST STRIP() Specification : ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH. R Estab
4) ST STRIP FOR LMG Description : ST STRIP FOR LMG() Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). R Estab
5) ST STRIP MM FOR REVOLVER Description : ST STRIP MM FOR REVOLVER() Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). R Estab
6) STEEL ROUND 27 MM Description : STEEL ROUND 27 MM() Specification : STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD). R Estab
7) SQUARE DRAWN ROD FOR FIRING DEVICE Description : SQUARE DRAWN ROD FOR FIRING DEVICE() Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H R Estab
8) STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH Description : STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH() Specification : SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. R Estab
9) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION R Estab
10) STEEL SQR 37MM FOR MAG Description : STEEL SQR 37MM FOR MAG() Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION R Estab
11) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE Description : STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE() Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE R Estab
12) SPG STEEL WIRE 1.216 MM (18SWG) Description : SPG STEEL WIRE 1.216 MM (18SWG)() Specification : SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE R Estab
13) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION Description : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION() Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE. R Estab
14) STEEL ROUND 18MM DIA FOR MAG Description : STEEL ROUND 18MM DIA FOR MAG() Specification : SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 R Estab
15) ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE Description : ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE() Specification : SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE R Estab
16) STEEL FLAT 22X18MM FOR MAG Description : STEEL FLAT 22X18MM FOR MAG() Specification : SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM) R Estab
17) STEEL ROUND 12MM DIA Description : STEEL ROUND 12MM DIA() Specification : STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250. R Estab
18) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 Description : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19() Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19 R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]() Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]() Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) STEEL FLAT 125X 8X 530 MM LONG IN CUT LENGTH[01]() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. R Nonestab
2) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C[03]() Specification : STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907) R Nonestab
3) STEEL FL 50X25MM[04]() Specification : STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3. R Nonestab
4) STEEL FLAT 36 MM X 62 MM[04]() Specification : STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B R Nonestab
5) Steel Round Dia 28mm[14]() Specification : STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20 R Nonestab
6) STEEL SHEET POINT 9MM 20SWG X 1000 X 1500MM FOR STIRKER MECHANISM[01]() Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM, STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449 PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD 7606/2. R Nonestab
7) STEEL FLAT RECTANGULAR SIZE 40 plus 5 MM X 65 plus 5 MM for TAR[01]() Specification : STEEL FLAT RECTANGULAR SIZE (40+5)MMX(65+5)MM IN THE LENGTH OF 1.5 TO 3MTR TO SPECN. BS:970 PT1 1983,GR 817 M40 HOT ROLLED AND NORMALISED CONDITION.TEST PIECE HARDNESS TO ACHIEVE 425-475 HV. R Nonestab
8) STEEL FLAT SIZE 6 X 22 MM IN HOT ROLLED AND NORMALISED CONDN FOR MAG[01]() Specification : STEEL FLAT SIZE:- 6 X 22MM IN HOT ROLLED & NORMALISED CONDN.TO SPECIFICATION BS:970:PT.3:1991:GR.070M55 MATERIAL TO BE TESTED IN HARDENED & TEMPERED CONDITION AS PER RULING SECTION & SEPERATE TEST PIECE NEED TO BE HEAT TREATED TO ACHIEVE R Nonestab
9) STEEL FLAT 45X50 070M55 OR EN9 FOR MAG[01]() Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION R Nonestab
10) STEEL ROD 30MM DIA[01]() Specification : Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB. R Nonestab
11) STEEL ROUND DIA 25MM[01]() Specification : STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25 R Nonestab
12) STEEL FLAT SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION[01]() Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION R Nonestab
13) STEEL SQUARE 22MM HOT ROLLED AND NORMALISED CONDITION TO SPECN BS 970 PT3 1991 GD070M55[01]() Specification : STEEL SQR. 22MM (7/8”) HOT ROLLED & NORMALISED CONDITION TO SPECN :BS:970 :PT-3 :1991 GD.070M55 R Nonestab
14) Steel Flat 75x40mm[01]() Specification : ST. FLAT 75(+/-5.0)MM X 40(+/-2.0)MM TO SPECN IS:6603-2001, DESIGNATION X12CR12 OR X20CR13. MACRO ETCH TEST & NMIR TEST (FOR MODERATELY/NON-STRESSED(II)) AS PER ANX. ‘A’ NATURE ‘C’ R Nonestab
15) STEEL RD 25MM DIA[03]() Specification : STEEL RD 25MM DIA SPECN.IS:6603-2001,DESIG-X15CR16 NI2 HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST(II) TO BE CARRIED OUT AS PER ANNEXURE NATURE `C' (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) R Nonestab
16) STEEL ROUND 18MM DIA[01]() Specification : STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 MACRO ETCH AND NMIR TEST (MODERATELY STRESSED/NON STRESSED COMPONENTS)AS PER ANNEXURE "A" NATURE-C R Nonestab
Category :
Grade : Grade III
Size : S
2904 MD. KHALIL MD. BASHIR
105/591, HALEEM MUSLIM COLLEGE ROAD, KANPUR UTTAR PRADESH
PIN1 : 208003
Phone No. : 9415044558 		AADFM6242K

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Wooden Chest for LMG Description : Wooden Chest for LMG() Specification : WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026. E Estab
2) CHEST FOR 9 MM CARBINE Description : CHEST FOR 9 MM CARBINE() Specification : AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03 E Estab
3) WOODEN CHEST MG2B FOR MAG Description : WOODEN CHEST MG2B FOR MAG() Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001 E Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BOX W 123 MK2 DESIGNER'S REF IA 882() Specification : IA 948 (a,k) DC 36868-A. R Estab
2) CASES WOOD PACKING 7A/L CIA/AMN/570() Specification : IA 948 R Estab
3) BOX M20C(WOOD) TO DRG PT.NO.ISV 546() Specification : DRG.NO. CQA(A)/AMN/ST/365 R Estab
4) CASE WOOD PACKING NO.55,KF/1066() Specification : DRG.NO.KF/1066 R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) WOODEN FITTING FOR LMG 5.56 MM Description : WOODEN FITTING FOR LMG 5.56 MM() Specification : AS PER DRAWING E Estab
2) CHEST RIFLE 5 56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES Description : CHEST RIFLE 5 56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES() Specification : CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2 E Estab
3) TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES Description : TIMBER SOFTWOOD CONIFEROUS PLANKS , BATTENS , SCANTLINGS OF ALL GRADES() Specification : IS:190-1991 , IS:5247 pt-I&II R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Equipment Factory

[ENR Registration]
Name Specification Use Status
1) WOODEN CRATE/CRATE WOOD PACKING VARIOUS Description : WOODEN CRATE/CRATE WOOD PACKING VARIOUS() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM Description : TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
3) TIMBER CHIR ,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR. Description : TIMBER CHIR ,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR.() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
4) TIMBER HARDWOOD NON CONIFEROUS PLANK GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR Description : TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
5) TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG Description : TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
2905 Nexgen Fluoropolymers Pvt Ltd
E-202, EPIP, Neemrana Industrial Area, District Alwar, Rajasthan Industrial Area, Neemrana Rajasthan
PIN1 : 301705
Phone No. : 01143057430 		AADCN3119

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432300004 TEFLON SHT Description : 6432300004 TEFLON SHT() Specification : HEMRL /ED/PS/286 C Estab
2) 6432300005 TEFLON SHT Description : 6432300005 TEFLON SHT() Specification : HEMRL/PS/286 C Estab
3) 6432300006 TEFLON SHT Description : 6432300006 TEFLON SHT() Specification : HEMRL/PS/286 C Estab
4) 6432300007 TEFLON SHT FILM Description : 6432300007 TEFLON SHT FILM() Specification : HEMRL/PS/286. C Estab
Category : p
Grade : 3
Size : S
2906 LIFE FOOTWEAR ENTERPRISES
89/140 DALEL PURWA DALEL PURWA KANPUR Uttar Pradesh
PIN1 : 208001
Phone No. : 9839029298
GSTIN : 09AIAPB1282F1ZR 		AIAPB1282F

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) TRADE ASSISTANCE FOR CLOSING OPERATION OF BOOT HIGH ANKLE RU PU SOLE OF DIFFRENT SIZES AS PER TERMS and CONDITIONS ENCLOSED[20]() Specification : Specification: Prov. specn. no. IND/TC/3847 (A) & as per terms & conditions enclosed. R Estab
Category :
Grade : Grade III
Size : S
2907 KAMALA FABRICS
8/363 E. B. COLONY, PERUMAPALYAM VASAVI POST ERODE TAMILNADU
PIN1 : 638316
Phone No. : 09042730211 		CNCPK5428D

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Tape Cotton UNPROOFED 6MM Description : Tape Cotton UNPROOFED 6MM() Specification : TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888(PROV) DC 3754-ME DT.12/12/02. R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2101774185 TAPE COTTON M PROOFED 25 MM WIDE. Description : 2101774185 TAPE COTTON M PROOFED 25 MM WIDE.() Specification : SPECN NO.IND/ME/888 R Estab
Category : s
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) CALICO BAGS 40 KG Description : CALICO BAGS 40 KG() Specification : BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) TAPE COTTON 6 MM WIDE() Specification : IND/ME/888 R Estab
2) TAPE COTTON MEDIUM PROOFED 13.00 MM PLUS MINUS 1.5 MM WIDE SPECN. IND/ME/888() Specification : IND/ME/888 R Estab
Category : p
Grade : 3
Size : S
2908 GOLDEN PEACOCK ELECTROPLATINGS PVT. LTD.
28, B.T. ROAD, KOLKATA WEST BENGAL
PIN1 : 700002
Phone No. : 033 2557 7068
GSTIN : 19AAACG9284B1ZJ 		AAACG9284B

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SURFACE TREATMENT ELECTRO FERRETIC LACQ OF 0 POINT 32 INCHES COMP Description : SURFACE TREATMENT ELECTRO FERRETIC LACQ OF 0 POINT 32 INCHES COMP() Specification : SURFACE TREATMENT, ELECTRO-FERRETIC. LACQ. OF 0.32" COMP C Estab
2) SURFACE TREATMENT CASE S ASSY CTM 0099 PB 33 AND 31 Description : SURFACE TREATMENT CASE S ASSY CTM 0099 PB 33 AND 31() Specification : SURFACE TREATMENT CASE S ASSY CTM 0099 PB 33 & 31 C Estab
3) NICKEL PLATING WITH COPPER UNDER COAT TO SPECN BS 1224 1970 FOLLOWED BY ELECTROPHERRETIC LACQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9 9 TO 13 AND PH 5 2 TO 5 6 THICKNESS OF LACQUER 5 TO 6 MICRON FOR CTM 0112 Description : NICKEL PLATING WITH COPPER UNDER COAT TO SPECN BS 1224 1970 FOLLOWED BY ELECTROPHERRETIC LACQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9 9 TO 13 AND PH 5 2 TO 5 6 THICKNESS OF LACQUER 5 TO 6 MICRON FOR CTM 0112() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 1
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970[91]() Specification : SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MIC P Nonestab
2) SURFACE TREATMENT OPERATION VIZ. ELECTROLESS NICKEL[91]() Specification : SURFACE TREATMENT OPERATION VIZ. ELECTROLESS NICKEL PLATING WITH BLACK REFLECTIVE DEPOSITE PH:7 TO 7.5 THICKNESS OF DEPOSITION 80 TO 12 MICRON ON COMPONENT: CTM-0108/2, 0109/2, 0129/2, 0130/2, 0116/2, 0131/2, 0121/2, 0128/2, 0127/2, 0125/ P Nonestab
3) SURFACE TREATMENT OPERATION VIZ: BLACK CHROMIUM PLATING THICKNESS OF DEPOSITION 5 TO 7 MICRON ON COMP: CTM-0108/3,0109/3,0129/3,0130/3,0116/3,0131/3,0121/3,0128/3,0127/3,0125/3,0112,0110/3,0111/3 AND PB-32[91]() Specification : SURFACE TREATMENT OPERATION VIZ: BLACK CHROMIUM PLATING THICKNESS OF DEPOSITION 5 TO 7 MICRON P Nonestab
4) NICKEL PLATING WITH COPPER UNDER COAT TO SPECN BS 1224 1970 FOLLOWED BY ELECTROPHERRETIC LACQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9 9 TO 13 AND PH 5 2 TO 5 6 THICKNESS OF LACQUER 5 TO 6 MICRON FOR CTM 0112[91]() Specification : AS PER DRAWING P Nonestab
Category : p
Grade : Grade III
Size : S
2909 S.P. ENTERPRISE
88, MANASHIPARA, GARUI, RABINDRANAGAR, KOLKATA WEST BENGAL
PIN1 : 700065
Phone No. : 033 2566 5696
GSTIN : 19AKVPG3863A1ZZ 		AKVPG3863A

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION Description : TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
2) LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION Description : LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION() Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL C Estab
3) PIN FIRING FRONT (PB-22) TO DRG. NO-CTM-0029A IN FINISHED CONDITION Description : PIN FIRING FRONT (PB-22) TO DRG. NO-CTM-0029A IN FINISHED CONDITION() Specification : AS PER REQUIRED DRG. C Estab
4) EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION Description : EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION() Specification : EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION C Estab
5) HAMMER PIVOT PIN 1055 000554 Description : HAMMER PIVOT PIN 1055 000554() Specification : HAMMER PIVOT PIN (F1312-190530) DS CAT 1055 000554 C Estab
Category : dp
Grade : 3
Size : S
2910 ASIAN PAINTS (INDIA) LTD
PENTA DIVISION B-5 TO B-10, SIPCOT INDUSTRIAL COMPLEX KUDIKADU CUDDALORE TAMILNADU
PIN1 : 607005
Phone No. : 04142239247 		CHEA03546E

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Penta Erythritol Description : Penta Erythritol() Specification : PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002. R Estab
Category : p
Grade : 1
Size : L
2911 VRC PLASTO MOULD(I) PVT LTD
EL-21, Electronic Zone, MIDC, Hingna Road, Nagpur-440016 Hingna Road, Nagpur Maharashtra
PIN1 : 440016
Phone No. : 07104242962 		NGPV02836B

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1020611428 POLY GRANULES LD JSS 9330 03 1995 Description : 1020611428 POLY GRANULES LD JSS 9330 03 1995() Specification : JSS: 9330-03: 2007 C Estab
2) 6273200026 OBTURATOR TO DRG NO CQA 155 1140 Description : 6273200026 OBTURATOR TO DRG NO CQA 155 1140() Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB). C Estab
3) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB Description : 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Estab
4) 6491338958 PLUG FUZE HOLE 35 MM FOR 81 MM HE Description : 6491338958 PLUG FUZE HOLE 35 MM FOR 81 MM HE() Specification : PLUG,FUZE HOLE,35 MM NO.6,DESIGNER REF. CIA/AMN/2125 PART NO.ITV 95 DC NO.36172-A. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT Description : GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT() Specification : GRUMMET ASSY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF. OFBL DRG.NO: BL/PB/U-5/343). C Estab
Category : p
Grade : 3
Size : S
2912 ARJUN BEES WAX
VADODRA VADODRA GUJRAT
PIN1 : 391760
Phone No. : 91-2668262081 		AAPFA2699N

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Bees Wax Refined Gr-A Description : Bees Wax Refined Gr-A() Specification : BEES WAX REFINED GR A (MELTING POINT 63 TO 66 DEGREE C AND AQUEOUS EXTRACT SHALL NOT BE ACIDIC) CONFIRMING TO SPECN. NO IS- 1504;1996 (THIRD REVISION) REAFFIRMED 2002. R Estab
Category : p
Grade : 1
Size : S
2913 KARNATAKA CNC TECH. PVT. LTD.
D-103, INDUSTRIAL ESTATE, RAJAJI NAGAR, BENGALURU KARNATAKA
PIN1 : 560010
Phone No. : 080 2350 2346 		BLRA05957A

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) Receiver Blank to Drg No M 9403B Description : Receiver Blank to Drg No M 9403B() Specification : Store Drg No M-8194B C Estab
2) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B Description : RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B() Specification : AS PER DRAWING C Estab
3) SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol Description : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol() Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol C Estab
4) MAGAZINE BOX AK 630 ASSY. 01 Description : MAGAZINE BOX AK 630 ASSY. 01() Specification : AS PER REQUIRED DRG. C Estab
5) MACHINING OF CRADEL Description : MACHINING OF CRADEL() Specification : MACHINING OF CRADEL FOR AK-630M TO SB-101 FROM CAS C Estab
6) WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N Description : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N() Specification : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG NO. NAD 1025/2 ARD 2431 C Estab
Category : dp
Grade : 1
Size : S
2914 G.M.T. UDYOG
167-A, ANANDAMATH, ICHAPUR, 24 PARGANAS (N) WEST BENGAL
PIN1 : 743144
Phone No. : 9433461011
GSTIN : 19AJCPG0113D1Z1 		AJCPG0113D

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) INDEXABLE INSERTED DRILL Description : INDEXABLE INSERTED DRILL() Specification : INDEXABLE INSERTED DRILL (DIA:18 MM / FLAT BOTTOM) S Estab
2) INSERTED U DRILL Description : INSERTED U DRILL() Specification : INSERTED U DRILL (DIA:18 MM) S Estab
3) SAFETY LEVER TO DRG NO PB 6 AS FINISHED COMPONENTS Description : SAFETY LEVER TO DRG NO PB 6 AS FINISHED COMPONENTS() Specification : SAFETY LEVER TO DRG. NO. PB-6 AS FINISHED COMPONENTS C Estab
4) CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION Description : CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION() Specification : CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION. C Estab
5) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION Description : TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
6) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION) Description : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)() Specification : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION) C Estab
7) DUMMY CARTRIDGE Description : DUMMY CARTRIDGE() Specification : DUMMY CARTRIDGE TO M-8237(PB-48) IN F/C C Estab
8) BORE CLEANING BRUSH TO DRG. NO.M-9106A FOR 0.32" PISTOL Description : BORE CLEANING BRUSH TO DRG. NO.M-9106A FOR 0.32" PISTOL() Specification : DRG. NO.M-9106A FOR 0.32" PISTOL C Estab
9) BOX SPARE SPRING KEEP PIN WASHER INSULATOR Description : BOX SPARE SPRING KEEP PIN WASHER INSULATOR() Specification : BOX SPARE SPRING KEEP PIN WASHER & INSULATOR F/C C Estab
10) HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION Description : HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION() Specification : HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION C Estab
11) PILLAR ASSY. TO DRG. NO.F-1303-030820B (DC NO. 19047-W dt. 02.05.07) IN F/C. Description : PILLAR ASSY. TO DRG. NO.F-1303-030820B (DC NO. 19047-W dt. 02.05.07) IN F/C.() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
2915 SETH NANDRAM DAULATRAM BIYANI
C-1, INDUSTRIAL AREA, HANUMANGARH JN. HANUMANGARH RAJASTHAN
PIN1 : 335512
Phone No. : 9314438806/07 		JDHS06653D

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Potassium Nitrate Gr.I Description : Potassium Nitrate Gr.I() Specification : POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2003 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE. R Estab
Category : p
Grade : 3
Size : S
2916 HETAL IMPEX
C/601, ADARSH GALAXY ADARSH VIHAR COMPLEX MARVE ROAD MALAD(w) MUMBAI MAHARASHTRA
PIN1 : 400064
Phone No. : 09167859568 		AAEHR1704E

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) METHANOL Description : METHANOL() Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006. R Estab
2) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
Category : s
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) METHANOL Description : METHANOL() Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006. R Estab
2) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
Category : s
Grade : 1
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 P Estab
2) 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988 Description : 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988() Specification : IS-245-198 P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 P Estab
2) 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988 Description : 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988() Specification : IS-245-198 P Estab
Category : p
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) SODA ASH COMMERCIAL GRADE Description : SODA ASH COMMERCIAL GRADE() Specification : C.F.SPECN.No. 39.0 Dt. 29-06-2006 (REV. No.1) Dt. 01-12-2016 R Estab
2) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : GLYCERINE (FOR NITRATION) SPECN : JSS 6810-109:2013 (REVISION NO.3) DC 5219-ME DATED 12-04-2014 PURITY-MINIMUM 99.3% R Estab
3) DIETHYLPHTHLATE Description : DIETHYLPHTHLATE() Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG. R Estab
Category : s
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) SODA ASH COMMERCIAL GRADE Description : SODA ASH COMMERCIAL GRADE() Specification : C.F.SPECN.No. 39.0 Dt. 29-06-2006 (REV. No.1) Dt. 01-12-2016 R Estab
2) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : GLYCERINE (FOR NITRATION) SPECN : JSS 6810-109:2013 (REVISION NO.3) DC 5219-ME DATED 12-04-2014 PURITY-MINIMUM 99.3% R Estab
3) DIETHYLPHTHLATE Description : DIETHYLPHTHLATE() Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG. R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) BORON POWDER GR I Description : BORON POWDER GR I() Specification : BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05 P Estab
2) BUTYL METHA CRYLATE Description : BUTYL METHA CRYLATE() Specification : G 1) PURITY- MIN 99% 2) SPECIFIC GRAVITY : 0.896 3) BOILING POINT : 162'C 4) FLASH POINT : 46'C 5) SOLUBILITY WATER 0.25 G/L MAX AT 20'C IN ONE LITRE BOTTLE (WITH TEST CERTIFICATE) P Estab
3) HEXANE COMMERCIAL GRADE TO Description : HEXANE COMMERCIAL GRADE TO() Specification : HEXANE ( COMMERCIAL GRADE) TO DOCUMENT NO. 06-7600-2010A 067 P Estab
4) LACTOSE MONOHYDRATED SIZE 1225 MICRON Description : LACTOSE MONOHYDRATED SIZE 1225 MICRON() Specification : LACTOSE MONOHYDRATED SIZE 1225 MICRON P Estab
5) SODIUM NITRATE GRADE I SIZE 125 MICRON Description : SODIUM NITRATE GRADE I SIZE 125 MICRON() Specification : SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134 P Estab
6) TITANIUM DIOXIDE WHITE ANATASE Description : TITANIUM DIOXIDE WHITE ANATASE() Specification : TITANIUM DIOXIDE WHITE ANATASE SPECN. IS-411-1991. THIRD REVISION REAFFIRMED 2002. OLD 9914234617 P Estab
7) TOLUENE NITRATION GRADE TO SPECN Description : TOLUENE NITRATION GRADE TO SPECN() Specification : TOLUENE NITRATION GRADE TO SPECN. IS-537 2011(2ND REVISION) DS CAT NO. 6810-000950 P Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) BORON POWDER GR I Description : BORON POWDER GR I() Specification : BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05 P Estab
2) BUTYL METHA CRYLATE Description : BUTYL METHA CRYLATE() Specification : G 1) PURITY- MIN 99% 2) SPECIFIC GRAVITY : 0.896 3) BOILING POINT : 162'C 4) FLASH POINT : 46'C 5) SOLUBILITY WATER 0.25 G/L MAX AT 20'C IN ONE LITRE BOTTLE (WITH TEST CERTIFICATE) P Estab
3) HEXANE COMMERCIAL GRADE TO Description : HEXANE COMMERCIAL GRADE TO() Specification : HEXANE ( COMMERCIAL GRADE) TO DOCUMENT NO. 06-7600-2010A 067 P Estab
4) LACTOSE MONOHYDRATED SIZE 1225 MICRON Description : LACTOSE MONOHYDRATED SIZE 1225 MICRON() Specification : LACTOSE MONOHYDRATED SIZE 1225 MICRON P Estab
5) SODIUM NITRATE GRADE I SIZE 125 MICRON Description : SODIUM NITRATE GRADE I SIZE 125 MICRON() Specification : SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134 P Estab
6) TITANIUM DIOXIDE WHITE ANATASE Description : TITANIUM DIOXIDE WHITE ANATASE() Specification : TITANIUM DIOXIDE WHITE ANATASE SPECN. IS-411-1991. THIRD REVISION REAFFIRMED 2002. OLD 9914234617 P Estab
7) TOLUENE NITRATION GRADE TO SPECN Description : TOLUENE NITRATION GRADE TO SPECN() Specification : TOLUENE NITRATION GRADE TO SPECN. IS-537 2011(2ND REVISION) DS CAT NO. 6810-000950 P Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2015 REVISION NO 3. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2015 REVISION NO 3. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
2917 SRI LAXMI INDUSTRIES
H.NO. 7-8-222/5, OLD AIRPORT ROAD, GOUTHAM NAGAR, FEROZGUDA, SECUNDERABAD TELANGANA
PIN1 : 500011
Phone No. : 040 2775 0400 		ABSFS2943K

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) RECEIVER TO DRG NO CTM 0108 1 TO CTM 0108 6 Description : RECEIVER TO DRG NO CTM 0108 1 TO CTM 0108 6() Specification : AS PER DRAWING C Estab
2) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B Description : RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B() Specification : AS PER DRAWING R Estab
Category : ddp
Grade : 2
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN FIRING for MAG Description : PIN FIRING for MAG() Specification : PIN FIRING,DS CAT NO.1005-006641 IN FINISHED CONDITION (MATERIAL TO BE ISSUED AGAINST BANK GUARANTEE) MAG 7.62 MM DC(I) NO. 25325-SA, DT.10.04.2002 C Estab
Category : p
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) CYLINDER Description : CYLINDER() Specification : AS PER DRG. NO. SK-01444 C Estab
3) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : FINISH MACHINING OF CATCH SAFE CATCH FIRE C Estab
4) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
5) SEMI FINISHED BARREL Description : SEMI FINISHED BARREL() Specification : AS PER DRG. NO. 01445 C Estab
6) SLEEVES Description : SLEEVES() Specification : AS PER D.S. CAT. NO. 3120-004660 C Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG() Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02 C Estab
Category : p
Grade : 3
Size : S
2918 KIRLOSKAR BROTHERS LIMITED
"YAMUNA", S.NO. 98/3 TO 7, BANER, PUNE MAHARASHTRA
PIN1 : 411045
Phone No. : 020 2721 4241 		AAACK7300E

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB Description : COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB() Specification : As per Drawing C Estab
2) PUMP SET Description : PUMP SET() Specification : PUMP SET MODEL : UP 150-38B MAKE : KIRLOSKAR C Estab
Category : ddp
Grade : 3
Size : S
2919 SUYOG CHEMICALS PVT. LTD.
AMRTA MANOR BUNGLOW NO. 1, 1ST FLOOR RAVINDRANATH TAGORE MARG, CIVIL LINES NAGPUR MAHARASHTRA
PIN1 : 440001
Phone No. : 07122520437 		S2842NGPA1

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Plasticizer Ester type-1(DBP) Description : Plasticizer Ester type-1(DBP)() Specification : Specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R Estab
Category : dp
Grade : 3
Size : S
2920 A K INDUSTRIES, NASHIK
E-53, MIDC AREA, SATPUR SATPUR NASHIK MAHARASHTRA
PIN1 : 422007
Phone No. : 02532350276 		AAFFA0275L

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) PAINT R/M A/D LIGHT BRS. GREEN Description : PAINT R/M A/D LIGHT BRS. GREEN() Specification : PAINT R/M A/D LIGHT BRS. GREEN R Estab
2) PAINT R/M A/D O.GREEN ISC-220 Description : PAINT R/M A/D O.GREEN ISC-220() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
3) PAINT RMP R/O Z/C A/D JSS-8010 Description : PAINT RMP R/O Z/C A/D JSS-8010() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
Category : p
Grade : 1
Size : L