List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2861 POLY TRADE (INDIA)
4&5 CANAL WEST ROAD KOLKATA WEST BENGAL
PIN1 : 700015
Phone No. : 8777808522
GSTIN : 19AAEFP9422H1Z0 		CALPO4351E

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300 Description : SHUTTER PLATE TBRL LF NO 9911358300() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Nonestab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526 Description : 3rd SET OF 4 ITEMS FOR MMHG 9911358526() Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS C Nonestab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) 125 MM HEAT BODY() Specification : AS PER DRAWING R Estab
2) BRASS WING NUT() Specification :AS PER DRAWING C Estab
3) .Cone Ring Small() Specification :AS PER DRAWING C Estab
4) Supporting Ring (Front, Middle & Rear)() Specification : AS PER DRAWING C Estab
5) END COVER() Specification : DRG.NO.ARDE 2139,Det.NO.10 C Estab
6) Rib Assy.(Front , Middle & Rear)() Specification : Det-11 to Drg No.ARDE-2139 C Estab
7) VANE ASSY() Specification : AS PER DRAWING C Estab
8) LUG ANCHORING ASSY. Description : LUG ANCHORING ASSY.() Specification : AS PER DRAWING C Estab
9) ARMING FORK Description : ARMING FORK() Specification : DRG NO- ARDE 2121 DET-11 C Estab
10) Bracket for Return Spring() Specification : Det.32 to Drg No.ARDE-2139 C Estab
11) STOPPER FOR LEVER LOCKING() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
12) PLUNGER ASSY.() Specification : DRG NO- ARDE2139 DET 35 C Estab
13) LEVER LOCKING ASSY() Specification :AS PER DRAWING C Estab
14) Tab Washer() Specification : Det.51 to Drg No.ARDE-2139 C Estab
15) .Washer() Specification : AS PER DRAWING C Estab
16) VANE SPINDLE ASSY() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
17) PIN VANE() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
18) PIVOT LEVER LOCKING() Specification : DRG NO- ARDE 2121 DET 7 C Estab
19) ARMING WIRE CLIP() Specification : AS PER DRAWING C Estab
20) ARMING WIRE GUIDE() Specification : AS PER DRAWING C Estab
21) COPPER SLEEVE FOR SHEAR WIRE ASSY() Specification : AS PER SPECIFICATION C Estab
22) COLLER() Specification : DRG.NO.ARDE 2139 DET.NO. 26 C Estab
23) SUPPORT WASHER() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
24) FLEXIBLE DRIVE ADAPTER Description : FLEXIBLE DRIVE ADAPTER() Specification : DRG NO- 2139 DET 57 C Estab
25) CLOSING DISC ASSY() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
26) HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM)() Specification : AS PER DRAWING C Estab
27) FUZE RING (DOUBLE RING HOOK)() Specification : AS PER DRAWING C Estab
28) HOLDER SPRING RACK() Specification :AS PER DRAWING C Estab
29) .Spring Return() Specification : DRG NO- ARDE 2121 C Estab
30) STUD ASSY Description : STUD ASSY() Specification : DRG NO- ARDE 2121 DET 40 C Estab
31) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
32) DIAPHRAGM() Specification : AS PER DRAWING C Estab
33) END COVER WELDING SUB ASSY. Description : END COVER WELDING SUB ASSY.() Specification : AS PER DRAWING C Estab
34) FIN ASSEMBLY() Specification : DET NO.-1 to DRG.NO. ARDE-2121 C Estab
35) PLUNGER ASSY FOR BTU-450 Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
36) COLLAR() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
37) LEVER LOCKING ASSY.() Specification : AS PER DRAWING C Estab
38) ARMING WIRE ASSY() Specification : DET NO-44 ARDE-2121 C Estab
39) LOCKING SLEEVE() Specification : DET NO-15 TO DRG.NO.ARDE-2121 C Estab
40) PIN() Specification :AS PER DRAWING C Estab
41) CONE RING LARGE & PIN LOCATING TU- ASSY() Specification : DET NO.62, ARDE-1947 C Estab
42) FUNNEL ASSY, IN F.C. Description : FUNNEL ASSY, IN F.C.() Specification : DRG NO- ARDE 1947 DET 57 C Estab
43) KIT ARMING & FUZING Description : KIT ARMING & FUZING() Specification : AS PER OFDC SPECIFICATION C Estab
44) ARMING FORK ASSEMBLY IN FC FOR BTU-250 Description : ARMING FORK ASSEMBLY IN FC FOR BTU-250() Specification : DRG.NO.9501-03 , DET NO.-15 C Estab
45) CLIP TRANSIT ASSY IN F C FOR TU TB 250 Description : CLIP TRANSIT ASSY IN F C FOR TU TB 250() Specification : DET.42 TO DRG NO.ARDE-9501-03 C Estab
46) STUD Description : STUD() Specification : ARDE / 9501-03 IN F.C C Estab
47) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
48) Kit Arming & Fuzing components() Specification : AS PER DRAWING C Estab
49) AXLE FIN() Specification : AS PER DRAWING C Estab
50) SAFETY PIN() Specification : AS PER DRAWING C Estab
51) WIND SHIELD() Specification : DRG.Pt.NO.IQX-1010 C Estab
52) SAFETY CAP Description : SAFETY CAP() Specification : AS PER DRAWING C Estab
53) DISC() Specification : AS PER DRAWING C Estab
54) STRIKER Description : STRIKER() Specification : DRG.NO-QX 331 C Estab
55) SEPTUM Description : SEPTUM() Specification : QX- 338 C Estab
56) DETENT Description : DETENT() Specification : DRG.NO.QX-1507 C Estab
57) WORM IN FC() Specification : DRG NO- CM 6822 C Estab
58) BRASS STAMPING WING NUT() Specification : AS PER OFDC SPECIFICATION C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) 125 MM HEAT BODY() Specification : AS PER DRAWING R Estab
2) BRASS WING NUT() Specification :AS PER DRAWING C Estab
3) .Cone Ring Small() Specification :AS PER DRAWING C Estab
4) Supporting Ring (Front, Middle & Rear)() Specification : AS PER DRAWING C Estab
5) END COVER() Specification : DRG.NO.ARDE 2139,Det.NO.10 C Estab
6) Rib Assy.(Front , Middle & Rear)() Specification : Det-11 to Drg No.ARDE-2139 C Estab
7) VANE ASSY() Specification : AS PER DRAWING C Estab
8) LUG ANCHORING ASSY. Description : LUG ANCHORING ASSY.() Specification : AS PER DRAWING C Estab
9) ARMING FORK Description : ARMING FORK() Specification : DRG NO- ARDE 2121 DET-11 C Estab
10) Bracket for Return Spring() Specification : Det.32 to Drg No.ARDE-2139 C Estab
11) STOPPER FOR LEVER LOCKING() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
12) PLUNGER ASSY.() Specification : DRG NO- ARDE2139 DET 35 C Estab
13) LEVER LOCKING ASSY() Specification :AS PER DRAWING C Estab
14) Tab Washer() Specification : Det.51 to Drg No.ARDE-2139 C Estab
15) .Washer() Specification : AS PER DRAWING C Estab
16) VANE SPINDLE ASSY() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
17) PIN VANE() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
18) PIVOT LEVER LOCKING() Specification : DRG NO- ARDE 2121 DET 7 C Estab
19) ARMING WIRE CLIP() Specification : AS PER DRAWING C Estab
20) ARMING WIRE GUIDE() Specification : AS PER DRAWING C Estab
21) COPPER SLEEVE FOR SHEAR WIRE ASSY() Specification : AS PER SPECIFICATION C Estab
22) COLLER() Specification : DRG.NO.ARDE 2139 DET.NO. 26 C Estab
23) SUPPORT WASHER() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
24) FLEXIBLE DRIVE ADAPTER Description : FLEXIBLE DRIVE ADAPTER() Specification : DRG NO- 2139 DET 57 C Estab
25) CLOSING DISC ASSY() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
26) HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM)() Specification : AS PER DRAWING C Estab
27) FUZE RING (DOUBLE RING HOOK)() Specification : AS PER DRAWING C Estab
28) HOLDER SPRING RACK() Specification :AS PER DRAWING C Estab
29) .Spring Return() Specification : DRG NO- ARDE 2121 C Estab
30) STUD ASSY Description : STUD ASSY() Specification : DRG NO- ARDE 2121 DET 40 C Estab
31) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
32) DIAPHRAGM() Specification : AS PER DRAWING C Estab
33) END COVER WELDING SUB ASSY. Description : END COVER WELDING SUB ASSY.() Specification : AS PER DRAWING C Estab
34) FIN ASSEMBLY() Specification : DET NO.-1 to DRG.NO. ARDE-2121 C Estab
35) PLUNGER ASSY FOR BTU-450 Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
36) COLLAR() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
37) LEVER LOCKING ASSY.() Specification : AS PER DRAWING C Estab
38) ARMING WIRE ASSY() Specification : DET NO-44 ARDE-2121 C Estab
39) LOCKING SLEEVE() Specification : DET NO-15 TO DRG.NO.ARDE-2121 C Estab
40) PIN() Specification :AS PER DRAWING C Estab
41) CONE RING LARGE & PIN LOCATING TU- ASSY() Specification : DET NO.62, ARDE-1947 C Estab
42) FUNNEL ASSY, IN F.C. Description : FUNNEL ASSY, IN F.C.() Specification : DRG NO- ARDE 1947 DET 57 C Estab
43) KIT ARMING & FUZING Description : KIT ARMING & FUZING() Specification : AS PER OFDC SPECIFICATION C Estab
44) ARMING FORK ASSEMBLY IN FC FOR BTU-250 Description : ARMING FORK ASSEMBLY IN FC FOR BTU-250() Specification : DRG.NO.9501-03 , DET NO.-15 C Estab
45) CLIP TRANSIT ASSY IN F C FOR TU TB 250 Description : CLIP TRANSIT ASSY IN F C FOR TU TB 250() Specification : DET.42 TO DRG NO.ARDE-9501-03 C Estab
46) STUD Description : STUD() Specification : ARDE / 9501-03 IN F.C C Estab
47) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
48) Kit Arming & Fuzing components() Specification : AS PER DRAWING C Estab
49) AXLE FIN() Specification : AS PER DRAWING C Estab
50) SAFETY PIN() Specification : AS PER DRAWING C Estab
51) WIND SHIELD() Specification : DRG.Pt.NO.IQX-1010 C Estab
52) SAFETY CAP Description : SAFETY CAP() Specification : AS PER DRAWING C Estab
53) DISC() Specification : AS PER DRAWING C Estab
54) STRIKER Description : STRIKER() Specification : DRG.NO-QX 331 C Estab
55) SEPTUM Description : SEPTUM() Specification : QX- 338 C Estab
56) DETENT Description : DETENT() Specification : DRG.NO.QX-1507 C Estab
57) WORM IN FC() Specification : DRG NO- CM 6822 C Estab
58) BRASS STAMPING WING NUT() Specification : AS PER OFDC SPECIFICATION C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Cone Ring Large & Pin Locating TU-Assy Description :Cone Ring Large & Pin Locating TU-Assy() Specification : Det.-62 ARDE-1947 C Estab
2) Supporting Ring (Front, Middle & Rear) Description : Supporting Ring (Front, Middle & Rear)() Specification :As per Drawing C Estab
3) End Cover Description :End Cover() Specification : Drg.No.ARDE 2139,Det.NO.10 C Estab
4) Rib Assy.(Front , Middle & Rear) Description : Rib Assy.(Front , Middle & Rear)() Specification : Det-11 to Drg No.ARDE-2139 C Estab
5) VANE ASSY Description : VANE ASSY() Specification : As per Drawing C Estab
6) LUG ANCHORING ASSY. Description : LUG ANCHORING ASSY.() Specification : AS PER DRAWING C Estab
7) WORM IN FC Description : WORM IN FC() Specification : DRG NO. CM 6822 C Estab
8) Bracket for Return Spring Description : Bracket for Return Spring() Specification : Det.32 to Drg No.ARDE-2139 C Estab
9) STOPPER FOR LEVEL LOCKING Description : STOPPER FOR LEVEL LOCKING() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
10) PLUNGER ASSY. Description : PLUNGER ASSY.() Specification : DRG NO- ARDE2139 DET 35 C Estab
11) LEVER LOCKING ASSY Description : LEVER LOCKING ASSY() Specification : AS PER DRAWING C Estab
12) Tab Washer Description : Tab Washer() Specification : Det.51 to Drg No.ARDE-2139 C Estab
13) .Washer Description : .Washer() Specification : AS PER DRAWING C Estab
14) VANE SPINDLE ASSY Description : VANE SPINDLE ASSY() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
15) PIN VANE Description : PIN VANE() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
16) Pivot Lever Locking Description : Pivot Lever Locking() Specification : Det-7 to Drg No.ARDE-2121 C Estab
17) ARMING WIRE CLIP Description : ARMING WIRE CLIP() Specification : AS PER DRAWING C Estab
18) COPPER SLEEVE FOR SHEAR WIRE ASSY Description : COPPER SLEEVE FOR SHEAR WIRE ASSY() Specification : AS PER SPECIFICATION C Estab
19) COLLER Description : COLLER() Specification : DRG.NO.ARDE 2139 DET.NO. 26 C Estab
20) SUPPORT WASHER Description : SUPPORT WASHER() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
21) FLEXIBLE DRIVE ADAPTER Description : FLEXIBLE DRIVE ADAPTER() Specification : DRG NO- 2139 DET 57 C Estab
22) CLOSING DISC ASSY Description : CLOSING DISC ASSY() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
23) HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM) Description : HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM)() Specification : AS PER DRAWING C Estab
24) FUZE RING (DOUBLE RING HOOK) Description : FUZE RING (DOUBLE RING HOOK)() Specification : AS PER DRAWING C Estab
25) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
26) STUD ASSY Description : STUD ASSY() Specification : DRG NO- ARDE 2121 DET 40 C Estab
27) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
28) DIAPHRAGM Description : DIAPHRAGM() Specification : AS PER DRAWING C Estab
29) END COVER WELDING SUB ASSY. Description : END COVER WELDING SUB ASSY.() Specification : AS PER DRAWING C Estab
30) FIN ASSEMBLY Description : FIN ASSEMBLY() Specification : DET NO.-1 to DRG.NO. ARDE-2121 C Estab
31) PLUNGER ASSY FOR BTU-450 Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
32) COLLAR Description : COLLAR() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
33) Lever Locking Assy. Description : Lever Locking Assy.() Specification : AS PER DRAWING C Estab
34) ARMING WIRE ASSY Description : ARMING WIRE ASSY() Specification : DET NO-44 ARDE-2121 C Estab
35) LOCKING SLEEVE Description : LOCKING SLEEVE() Specification : DET NO-15 TO DRG.NO.ARDE-2121 C Estab
36) PIN Description : PIN() Specification : AS PER DRAWING C Estab
37) FUNNEL ASSY, IN F.C. Description : FUNNEL ASSY, IN F.C.() Specification : DRG NO- ARDE 1947 DET 57 C Estab
38) KIT ARMING & FUZING Description : KIT ARMING & FUZING() Specification : AS PER OFDC SPECIFICATION C Estab
39) ARMING FORK ASSEMBLY IN FC FOR BTU-250 Description : ARMING FORK ASSEMBLY IN FC FOR BTU-250() Specification : DRG.NO.9501-03 , DET NO.-15 C Estab
40) CLIP TRANSIT ASSY IN F C FOR TU TB 250 Description : CLIP TRANSIT ASSY IN F C FOR TU TB 250() Specification : DET.42 TO DRG NO.ARDE-9501-03 C Estab
41) STUD Description : STUD() Specification : ARDE / 9501-03 IN F.C C Estab
42) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
43) KIT ARMING & FUZING COMPONENTS Description : KIT ARMING & FUZING COMPONENTS() Specification :AS PER DRAWING C Estab
44) AXLE FIN Description : AXLE FIN() Specification : AS PER DRAWING C Estab
45) SAFETY PIN Description : SAFETY PIN() Specification : AS PER DRAWING C Estab
46) WIND SHIELD Description : WIND SHIELD() Specification : DRG.Pt.NO.IQX-1010 C Estab
47) SAFETY CAP Description : SAFETY CAP() Specification : AS PER DRAWING C Estab
48) DISC Description : DISC() Specification : AS PER DRAWING C Estab
49) SEPTUM Description : SEPTUM() Specification : QX- 338 C Estab
50) DETENT Description : DETENT() Specification : DRG.NO.QX-1507 C Estab
Category : dp
Grade : 3
Size : S
2862 SUPARNA CHEMICALS LDT.
54-A, MITTAL TOWER NARIMAN POINT MUMBAI MAHARASHTRA
PIN1 : 400021
Phone No. : 022000274407 		MUMS37272E

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di Phenyl Amine Description : Di Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2020 REVISION NO 4. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Melamine Make China/Indonesia Description : Melamine Make China/Indonesia() Specification : MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICL R Estab
2) Plasticizer Ester type-1(DBP) Description : Plasticizer Ester type-1(DBP)() Specification : Specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R Estab
3) ISOPHORONE DI-ISOCYNATE (IPDI) Description : ISOPHORONE DI-ISOCYNATE (IPDI)() Specification : ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA. R Estab
Category : dp
Grade : 2
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Penta Erithritol Di-Oleate (PEDO) Description : Penta Erithritol Di-Oleate (PEDO)() Specification : PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2013 (Revision No.1) R Estab
Category : dp
Grade : 2
Size : S
2863 Faith Industries Ltd
Faith Industries Ltd Sarkhej Gandhinagar Highway Faith Industries Ltd Ahmedabad Gujarat
PIN1 : 380015
Phone No. : 26870890
GSTIN : 24AAACF2967J1ZK 		AAACF2967J

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017 Description : WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017() Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011 R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Paraffin Wax SPECIAL (Hard Grade) Description : Paraffin Wax SPECIAL (Hard Grade)() Specification : PARAFFIN WAX SPECIAL CONFORMING TO SPECN IS:7401-1987 (FIRST REVISION) HARD GRADE(REAFFIRMED 2005) R Estab
Category : s
Grade : 2
Size : S
2864 SWASTIK ACIDS & CHEMICALS
Chandrashekhar Azad Square Central Avenue NAGPUR Maharashtra
PIN1 : 440032
Phone No. : 2764908
GSTIN : 27AAGFS0979Q1ZB 		NGPS02180D

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1003134011 DESMODURE RC A SOLUTION OF POLYISOCYANURATE OF TOLUNEDIISOCYNATE IN APPROX 35 PERCENT ETHYL ACETATE[10]() Specification : DESMODURE RC A SOLUTION OF POLYISOCYANURATE OF TOLUNEDIISOCYNATE IN APPROX 35 PERCENT ETHYL ACETATE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CALCIUM CARBONATE CHALK CALCIT Description : CALCIUM CARBONATE CHALK CALCIT() Specification : CALCIUM CARBONATE CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD. R Estab
2) Camphor Description : Camphor() Specification : IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002 R Estab
3) CAUSTIC SODA TECHNICAL FLAKES Description : CAUSTIC SODA TECHNICAL FLAKES() Specification : CAUSTIC SODA TECHNICAL FLAKES TO SPECIFICATION IS:252-1991. (THIRD REVISION), Reaffirmed 2003 Amds 1. R Estab
4) Formaldehyde SOLUTION Description : Formaldehyde SOLUTION() Specification : FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973.(FIRST REV) REAFFIRMED 2005,AMDS 2. R Estab
5) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
6) Soda Ash ( Light ) Technical Description : Soda Ash ( Light ) Technical() Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 FOURTH REVISION.DC-3804-ME DTD.3.2.2004.(REAFFIRMED 2005) R Estab
7) Glycerine for Nitration Description : Glycerine for Nitration() Specification : GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST. R Nonestab
Category : s
Grade : 2
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(PROV)- DC NO.3754-ME DATED 12.12.2002 R Estab
Category : s
Grade : 2
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION item code 1001015748[10]() Specification : BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE R Nonestab
Category :
Grade : Grade III
Size : S
2865 BHATTACHARJEE INTERNATIONAL
15B, SEBAK BAIDYA STREET KOLKATA WEST BENGAL
PIN1 : 700029
Phone No. : 9748271262 		AMIPB6160A

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER STRIP TO SPECN IS 3487 66 CHEMICAL COMP Description : COPPER STRIP TO SPECN IS 3487 66 CHEMICAL COMP() Specification : COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP R Estab
Category : p
Grade : 3
Size : S
2866 GISCO PAINTS
24, INDUSTRIAL ESTATE, ADHARTAL, JABALPUR M.P.
PIN1 : 482004
Phone No. : 07612680248
GSTIN : 23AAEFG3400E1Z8 		AAEFG3400E

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) PAINT R/M A/D O.GREEN ISC-220 Description : PAINT R/M A/D O.GREEN ISC-220() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Estab
2) 1013400300 VARNISH SHELLAC 30 PERCENT APC 225 Description : 1013400300 VARNISH SHELLAC 30 PERCENT APC 225() Specification : AS PER OFBH SPECIFICATION R Estab
3) 1011308537 PAINT RM AD SIGNAL RED Description : 1011308537 PAINT RM AD SIGNAL RED() Specification : AS PER OFBH SPECIFICATION R Estab
4) 9911841939 BLACK BOARD PAINT Description : 9911841939 BLACK BOARD PAINT() Specification : 9911841939 BLACK BOARD PAINT R Estab
5) 9911839804 PAINT STOV ENAMEL GOLDEN YELLOW Description : 9911839804 PAINT STOV ENAMEL GOLDEN YELLOW() Specification : AS PER OFBH SPECIFICATION R Estab
6) 1011300099 PAINT RFU ALUMINIUM Description : 1011300099 PAINT RFU ALUMINIUM() Specification : AS PER OFBH SPECIFICATION R Estab
7) 1010927002 PAINT RM AD PURE WHITE Description : 1010927002 PAINT RM AD PURE WHITE() Specification : AS PER OFBH SPECIFICATION R Estab
8) 9911844697 PAINT WHITE TO SPECN IS168 Description : 9911844697 PAINT WHITE TO SPECN IS168() Specification : 9911844697 PAINT WHITE TO SPECN.IS:168-19, R Estab
9) 9911833896 PAINT RFU OLIVE GREEN ISC 294 Description : 9911833896 PAINT RFU OLIVE GREEN ISC 294() Specification : AS PER OFBH SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PAINT READY MIXED Description : PAINT READY MIXED() Specification : AS PER REQUIREMENT C Estab
2) VARNISH OIL STOVING (APC-221 GR-I) Description : VARNISH OIL STOVING (APC-221 GR-I)() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) PAINT READY MIXED Description : PAINT READY MIXED() Specification : AS PER REQUIREMENT C Estab
2) VARNISH OIL STOVING (APC-221 GR-I) Description : VARNISH OIL STOVING (APC-221 GR-I)() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAINT RM STEN SGF GOLDEN YELLOW() Specification : IS 138-1992 3RD REV.WITH A.NO.1 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) Description : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)() Specification : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) P Estab
2) PAINT READY MIXED AIR DRYING SEMI Description : PAINT READY MIXED AIR DRYING SEMI() Specification : PAINT READY MIXED SPRAYING AIR DRYING SEMI GLOSSY FINISHED LIGHT BRUNSWICK GREEN FOR GENERAL PURPOSE ISC: 225 OF IS: 5-1994 (4TH REV.) AMMENDMENT NO. 1 TO SPECN IS: 168/1993 ( 3RD REV.) AS APPLICABLE FOR DEFENCE USE. P Estab
Category : p
Grade : 2
Size : S
1) High Explosive Factory

[Deemed Registration]
Name Specification Use Status
1) PAINT RM STENS GF Description : PAINT RM STENS GF() Specification : IS: 138-1992 (THIRD REV) REAFF 2014, WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50 R Estab
2) PAINT RFU FINI AMMN Description : PAINT RFU FINI AMMN() Specification : SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90 R Estab
Category : p
Grade : 3
Size : S
2867 ABB LIMITED
RAMAN BOARDS, 167 TH K.M., MYSORE-OOTY ROAD, THANDAVAPURA MYSORE KARNATAKA
PIN1 : 571302
Phone No. : 08221 2536100 		AAACA3834B

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE Description : 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE() Specification : JSS:8135-09: 2004 R Estab
2) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5 Description : 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5() Specification : SPECN. NO. JSS 8135-09 R Estab
Category : ddp
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR() Specification : JSS:8135-09:2004 R Estab
2) PAPER FOR GUN CARTG. AMMUNITION.THICKNESS 0.142MM TO 0.162MM WIDTH 387.4MM PAPER TO BE ROLLED IN REELS. PAPER LOADED REEL DIA 457.2MM TO 508MM. CORE DIA OF REEL 50MM BROWN/BUFF NATURAL COLOUR TO SPECIFICATION JSS:8135-09 :2004(REVISION NO. 2) DC 5065-ME REAFFIRMED 2011() Specification : JSS:8135-09:2004 R Estab
3) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115() Specification : JSS:8135-09:2004 R Estab
Category : p
Grade : 3
Size : L
2868 JKEW FORGINGS LTD
AGARWALA BUILDING, THE MALL, KANPUR UP
PIN1 : 208004
Phone No. : 0000000000 		AAACJ3439M

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL FORGING TO FOR BLOCK FRONT OF MAG Description : STEEL FORGING TO FOR BLOCK FRONT OF MAG() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Forging Cylinder Gas Description : Steel Forging Cylinder Gas() Specification : Steel Forging Cylinder Gas SKM 306*5 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG C Estab
Category : p
Grade : 3
Size : S
2869 ASHOK TIMBER INDUSTRIES
E-22, INDUSTRIAL AREA YAMUNANAGAR HARYANA
PIN1 : 135001
Phone No. : 07612743368 		135001A269

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PLYWOOD BWR 12-13MM X7PLYX1.2X1.2M (2270415254) Description : PLYWOOD BWR 12-13MM X7PLYX1.2X1.2M (2270415254)() Specification : PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992. R Estab
2) BOX M-369 WOODEN IA-880 ISV-165A (6570521000) Description : BOX M-369 WOODEN IA-880 ISV-165A (6570521000)() Specification : BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4. R Estab
3) TIMBER M/H/C/CHIK/CHIR 19X75X1.25M (2255548309) Description : TIMBER M/H/C/CHIK/CHIR 19X75X1.25M (2255548309)() Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG. R Estab
Category : p
Grade : 3
Size : S
2870 PERFORMANCE PRODUCTS AND SERVICES
2 116 BYE PASS ROAD SENEERKUPPAM VILLAGE POONAMALLEE TAMIL NADU
PIN1 : 600056
Phone No. : 044 26494495 		CHEP07792B

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) CASTROL Description : CASTROL() Specification : CASTROL MAKE PRODUCTS P Estab
Category : s
Grade : 2
Size : S
2871 DECORATIVE PRODUCTS
103 N SHIVSHAKTI IND.ESTATE ABOVE SARASWAT CO OP BANK L.B.S.MARG GHATKOPER MUMBAI MAHARASHTRA
PIN1 : 400086
Phone No. : 9819601710 		ASCPS9194H

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2526001850 STICK ON EXPLOSIVE LABEL FOR POD Description : 2526001850 STICK ON EXPLOSIVE LABEL FOR POD() Specification : STICK-ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 00 51 00 00 002 OODA FOR POD (FILLED) UNHD 1.1 E. R Estab
2) 2526001851 STICK ON EXPLOSIVE LABEL FOR FUZE Description : 2526001851 STICK ON EXPLOSIVE LABEL FOR FUZE() Specification : STICK- ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 02 04 0000 002 00DA FOR FUZE & ACCESSORIES PACKING BOX UNHD 1.1 B. R Estab
3) 2556000990 LABEL SK 1473 Description : 2556000990 LABEL SK 1473() Specification : STICKER LABEL DRG. NO. SK- 1473 DT. 15/10/84. R Estab
4) 2556001858 LABEL STICKER FOR FUZE B429E FILLED Description : 2556001858 LABEL STICKER FOR FUZE B429E FILLED() Specification : CQA(A) 2201,FOR FIXING ON CONTAINER 38 B,FOR PACKING FUZE B 429E. R Estab
5) 2590000040 LABEL IA 983 Description : 2590000040 LABEL IA 983() Specification : SPECN. NO. IS: 13262-1992 (R.A.1997) R Estab
6) 2590000041 LABEL SK 1457 Description : 2590000041 LABEL SK 1457() Specification : LABEL STICKER COLOUR: OLIVE GREEN OR BLACK R Estab
Category : p
Grade : 3
Size : S
2872 GEETA TRADING COMPANY
SHAKTI TIRAHA,JAY PRAKASH NAGAR,ADHARTAL, JABALPUR MADHYA PRADESH
PIN1 : 482004
Phone No. : 07612743368 		482004G123

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866) Description : SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866)() Specification : SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265. C Estab
Category : p
Grade : 3
Size : S
2873 GRS ENGINEERING PVT LTD
PRABHU NIVAS, 2664/1A,D-52/A FIRST FLOOR 3RD MAIN ROAD,VV MOHALLA MYSORE TAMILNADU
PIN1 : 570002
Phone No. : 07612743368 		570002G821

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600) Description : SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Estab
Category : p
Grade : 3
Size : S
2874 KAIMFIN INDUSTRIES
PLOT NO.891,SECTOR-15A FARIDABAD HARYANA
PIN1 : 121007
Phone No. : 07612743368 		0000TR1625

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) FLUX RUSTODINE 125(1032137040) Description : FLUX RUSTODINE 125(1032137040)() Specification : FLUX RUSTODINE 125 R Estab
Category : p
Grade : 3
Size : S
2875 KAVITA INDUSTRIES
JAY MALHAR SHED, GALA No.1, EASTERN EXPRESS HIGHWAY CHEMBUR MUMBAI MAHARASHTRA
PIN1 : 400071
Phone No. : 07612743368 		0000TR5053

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) HEXA CHLORO ETHANE (1001290307) Description : HEXA CHLORO ETHANE (1001290307)() Specification : SPECN: JSS-6810-99-2011 (REVISION NO. 2) R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) HEXA CHLORO ETHANE (1001290307) Description : HEXA CHLORO ETHANE (1001290307)() Specification : SPECN: JSS-6810-99-2011 (REVISION NO. 2) R Estab
Category : p
Grade : 3
Size : S
2876 SAARC TOOL TECH (P) LTD
PLOT NO. 85/86/87, SIDCO IND. ESTATE, COIMBATORE TAMILNADU
PIN1 : 641050
Phone No. : 07612743368 		641050S001

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232 Description : PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232() Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014. C Estab
2) PACKAGE TO DRG NO 08040002000000000 LF 9911358292 Description : PACKAGE TO DRG NO 08040002000000000 LF 9911358292() Specification : PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015. R Estab
Category : p
Grade : 3
Size : S
2877 Shri Konark Precision Tools (P) Ltd.
Madhavi Nagar Ferozguda Hyderabad Hyderabad AP
PIN1 : 500011
Phone No. : 9666404191 		HYDSO3296G

Download 		1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies. Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.() Specification : Drg. No.ITW-63 C Estab
Category : p
Grade : 3
Size : S
2878 PRS PERMACEL PVT.LTD.HOECHST
PLOT NO. PL-11/1, MIDC AMBERNATH INDUSTRIAL AREA AMBERNATH THANE MAHARASHTRA
PIN1 : 421506
Phone No. : 07612743368 		00000TR516

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE W/P FABRIC 50MM WIDE (2101773048) Description : TAPE ADHESIVE W/P FABRIC 50MM WIDE (2101773048)() Specification : TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14. R Estab
Category : p
Grade : 3
Size : S
2879 RISHIROOP POLYMERS PVT. LTD
65,ATLANTA,NARIMAN POINT MUMBAI MAHARASTRA
PIN1 : 400021
Phone No. : 07612743368 		400021R056

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) RUBBER CHLORINATED LF 1020670803 Description : RUBBER CHLORINATED LF 1020670803() Specification : CHLORINATED RUBBER [CR] TO SPECN:-IND/ME/513 DC NO 2022-ME DT 30.11.74. R Estab
Category : p
Grade : 3
Size : S
2880 EDGE TOOLS INDIA
B-34, SECTOR-VI NOIDA UTTAR PRADESH
PIN1 : 201301
Phone No. : 9910117084 		ABQPBJ8032

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 6ST. BL. CY. GAS SKM-889. Description : 6ST. BL. CY. GAS SKM-889.() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S