List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2821 Hoops & Strips Pvt.Ltd.
23 A , Netaji Subhas Road, 2nd Floor, Room No.15 Netaji Subhas Road Kolkata West Bengal
PIN1 : 700001
Phone No. : 22312621
GSTIN : 19AAACH6687B1ZH 		CALHO1926B

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinder Arm-1099C2[65]() Specification : CR steel bright annealed strip 1.05mm (+/-0.02mm) thick x 206mm(1.00) wide x 1045mm (+0.00/-5.00) long to material specn. steel to IS: 1570 C15 latest issue D.D. quality semikilled fine finish and best surface (to manufacture Vane Cylinde R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0145060016 SHEET MILD STEEL 1830X915[01]() Specification : IS-513-1994 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE[63]() Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133021020 SHEET M S[01]() Specification : SHEET MILD STEEL,SIZE: 2 MM THICK X 1830 MM LONG X 915 WIDE.IS - 1079-1994,GRADE "O" R Nonestab
2) 0133021025 SHEET STEEL[01]() Specification : SHEET STEEL,SIZE 3000 MM LONG X 1000 MM WIDE X 2.5 MM THICKTO SPECN.IS: 513 -1994, GRADE "D" R Nonestab
3) 0134071134 SHEET STEEL SIZE[01]() Specification : SHEET STEEL SIZE 1830 MM LONG X 915 MM WIDE X 1.6 MM THICKTO SPECN IS 513 1986 GRADE D R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030112 MS PLATE SIZE 1100[01]() Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE) C Nonestab
2) 0133030115 MS PLATE SIZE 400[01]() Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530 Description : STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530() Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUPRO NICKEL STRIP [SIZE:26-0.2 (W) MM X 0.4+0.03 (T) MM TO SPECN.[07]() Specification : CUPRO NICKEL STRIP [SIZE:26-0.2 (W) MM X 0.4+0.03 (T) MM TO SPECN. BS EN 1652-1998,DESIGN CuNi25 WITH %BI RESTRICTED TO 0.002%. MATERIAL CONDITION R-290. OXIDATION, BEND AND DENT MARK SHOULD NOT BE PRESENT ON COIL SURFACE C Nonestab
2) COPPER STRIP SIZE:20+/- 0.1MM(W)x0.7+0.01MM(T)[07]() Specification : COPPER STRIP SIZE:20+/- 0.1MM(W)x0.7+0.01MM(T) TO SPECN.:BS EN 1652:1998 DESIGN Cu-ETP MATERIAL CONDITION R-220 (Cu ETP and CW004A Both indicate the same)OXIDATION, BEND AND DENT MARK SHOULD NOT BE PRESENT ON COIL SURFACE C Nonestab
3) COPPER STRIP SIZE:13+/- 0.2MM(W)x0.35+0.02MM(T) TO SPECN[07]() Specification : COPPER STRIP SIZE:13+/- 0.2MM(W)x0.35+0.02MM(T) DEEP DRAWING QUALITY TO IS 14811-2000 "O" CONDITION CHEMICAL COMP. AS PER IS-191-2007 GRADE ETP. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CUPRO NI STRIP BS EN 1652 LF 0700169101 Description : CUPRO NI STRIP BS EN 1652 LF 0700169101() Specification : CUPRO NICKEL STRIP SIZE 26+/-0.50 MM WIDE x 0.50[+0.02/-0.03 MM] THICK IN COILS. TO SPECN:- BS EN 1652:1998 DESIGN Cu Ni 25 WITH % Bi RESTRICTED TO 0.002%,MATERIAL CONDITION R-290 OR BS EN 1652:1998 DESIGN Cu Ni 10 Fe 1 Mn. MATERIAL CONDI R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020 Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020() Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652 R Nonestab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) MS SHEET 2 MM THICK[90]() Specification : MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020 R Nonestab
2) MS PLATE 10 X 1000 OR 1250 X 4500 MM[90]() Specification : MS PLATE 10MM THICK × 1250/1500 × 5000 MM SPECN IS:2062 GR A/B R Nonestab
3) MS PLATE 12 MM IS 2062[90]() Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B" R Nonestab
4) MS PLATE 16 MM IS 2062 GR B[90]() Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG R Nonestab
5) MS PLATE 25 MM THICK[90]() Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42 R Nonestab
6) HR SHEET 4 MM X 1250 X 2500[90]() Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK) R Nonestab
7) MS PLATE 6 X 1250 X 4500 OR 5000 MM[90]() Specification : MS PLATE 6MM×1250×5000/6300 MM SPECN-IS:2062 GR "B" R Nonestab
8) CR SHEET[90]() Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK R Nonestab
9) MS PLATE 8 X 1400 OR 1500 X 4500 MM[90]() Specification : MS PLATE 8 MM THICK X 1500 X 4500/5000 MM SPECN IS:2062 GR. B OR ALTERNATE IS-2062 GR. C R Nonestab
10) MS PLATE 5X1400 OR 1500X4500 OR 5000[90]() Specification : MS PLATE 5.00 MM THICK X 1400 OR 1500 X 4500 OR 5000 MM SPECN:- IS: 2062 GR. A/B R Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HR SHEET 4 MM X 1250 X 2500[90]() Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) MILD STEEL PLATE FLAT 3MM THICK[21]() Specification : IS: 226, GRADE ST42-S R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP TO SPECN BS1449 PT I 1983 SECTION 2 GRADE CS 3 IN BRIGHT FINISHED CONDITION IN ROLL FORM SIZE 54 MINUS 0POINT 3 MM WIDE X 0 POINT 2 MINUS 0 POINT 03 MM THICK Description : STEEL STRIP TO SPECN BS1449 PT I 1983 SECTION 2 GRADE CS 3 IN BRIGHT FINISHED CONDITION IN ROLL FORM SIZE 54 MINUS 0POINT 3 MM WIDE X 0 POINT 2 MINUS 0 POINT 03 MM THICK() Specification : STEEL STRIP TO SPECN.BS1449.PT-I-1983 SECTION 2 GRADE CS-3 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:- 54 - 0.3 MM WIDE X 0.2 - 0.03 MM THICK. R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Steel Strip 15 x 0point2 mm BS1449 IS513DD LF 0121060022 Description : Steel Strip 15 x 0point2 mm BS1449 IS513DD LF 0121060022() Specification : Steel Strip 15+/- 0.50 mm wide X 0.20-0.02 mm thick to specn: IS513-2008 GR.CR3 or BS-1449- section 1.1.1991 GR.1 CSIN Coil of ID 60MM LF 0121060022 R Estab
2) STEEL STRIP 200X1point1MM BS1449 CR2 CS LF 0121090688 Description : STEEL STRIP 200X1point1MM BS1449 CR2 CS LF 0121090688() Specification : STEEL STRIP 200 +/-0.5 MM WIDE X 1.10 +/-0.05 MM THICK LENGTH OF 3000mm +/-5mm TO SPECN: BS-1449 PT-I-83 CR-2/CS-2 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY Description : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY() Specification : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY P Estab
2) HIGH TENSILE STEEL STRAP Description : HIGH TENSILE STEEL STRAP() Specification : HIGH TENSILE STEEL STRAP TO IS 5872 -1990,GRADE-1, REAT-2010-SUITABLY BLUED OR RUST PROOFED (SIZE - 19.05MM WIDTH x 0.63MM THICK) NOTE - MAXIMUM OUTER DIAMETER OF THE ROLL - 600MM, INNER DIAMETER OF THE ROLL - 300+10MM, WEIGHT OF ONE ROL P Estab
3) IRON TURNINGS (FLAT STRIPS,1/2" WIDE) Description : IRON TURNINGS (FLAT STRIPS,1/2" WIDE)() Specification : IRON TURNINGS [FLAT STRIPS,1/2 INCH WIDE 0.2 MM THICK & LENGTH -MORE THAN 4 INCH (APPROX.) FREE FROM ALLOY, IMPURITIES & GREASY MATERIALS] P Estab
4) SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 Description : SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93() Specification : SEAL TO DRG NO.6390155, DC NO.35565- A, DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE - 19.05MM(W) x 0.63MM THICK. P Estab
Category : p
Grade : 3
Size : S
2822 HYDERABAD PRECISION MFG CO PVT LTD
B-16 TECHNOCRATS INDUSTRIAL ESTATE, PHASE-II, BALANAGAR, HYDERABAD - 500037 BALANAGAR HYDERABAD Telangana
PIN1 : 500037
Phone No. : 23079149 		AAACH4979A

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA Description : SAFE AND ARMING DEVICE M9040A1 ASSY OF FUZE PDM9030A1 AS PER OFAJ DRG NO FS2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA() Specification : SAFE AND ARMING DEVICE M9040A1 ASSY. OF FUZE PDM9030A1 AS PER OFAJ DRG. NO. FS-2650 COMPRISING OF 24 COMPONENTS AS PER LIST ATTACHED AND ACCEPTANCE CRITERIA C Estab
Category : ddp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630 Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630() Specification : NAI(J) 501/6/3(P) FOR Fz DASD AK-630 C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6044000600 TAIL UNIT 2A Description : 6044000600 TAIL UNIT 2A() Specification : SPECN NO. CQA(A)2342 C Estab
2) 6120900102 FIN ASSLY WITH BAND FOR 125MM HE 1A Description : 6120900102 FIN ASSLY WITH BAND FOR 125MM HE 1A() Specification : FIN ASSEMBLY TO DRAWING NO.4-024610 DETAIL NO.30 DC 36892-A.DT.12/04/2003 FOR 125 MM HE AMMUNITION. C Estab
3) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT Description : 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT() Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04 C Estab
4) 6330130100 FZ 117 DA MK 20 E WITH CAP Description : 6330130100 FZ 117 DA MK 20 E WITH CAP() Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3. C Estab
5) 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7 Description : 6330600180 STRIKER MECHANISM FOR FZ B 429 CD7() Specification : STRIKER MECHANISM DRG.NO.3-016919,53-B-025Y,CD-7,DC-34920-A DT.23-7-90 EXCEPT SUB ASSEMBLY CD-6 AND ITEM DETAIL 53 FOR FUZE B 429E/B 429. C Estab
6) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY Description : 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY() Specification : SPECN. NO. CQA(A) 0917 C Estab
7) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC Description : 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC() Specification : PRIMER ELECTRIC 1A/L EMPTY C Estab
8) 6380600100 PRIMER 18 A EMPTY Description : 6380600100 PRIMER 18 A EMPTY() Specification : PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY. C Estab
9) 6380608100 PRIMER 19B EMPT IQX 71 GE Description : 6380608100 PRIMER 19B EMPT IQX 71 GE() Specification : SPECN.NO.CIA 3102 C Estab
10) 6410900120 COVER OF OBTURATOR DET 10 Description : 6410900120 COVER OF OBTURATOR DET 10() Specification : COVER OF OBTURATOR TO DRG.NO.3-027321 DET.NO.10 DC-36050-ADT.5/12/95 FOR PRIMER GUV-7. C Estab
11) 6410900130 CLAMPING NUT AND BASE ASSY DET 12 13 Description : 6410900130 CLAMPING NUT AND BASE ASSY DET 12 13() Specification : CLAMPING NUT DRG. NO. 3-027321 DETAIL NO. 12 DC 36050-A ANDBASE DRG.NO.3-027321 DET. NO. 13 DC 36050-A FOR PRIMER GUV-7IN ASSEMBLED CONDITION AS PER DRG. NO. 3-027321/4B2/CD4. C Estab
12) 6410900140 CLAMPING BUSH DET 15 PRIMER GUV 7 Description : 6410900140 CLAMPING BUSH DET 15 PRIMER GUV 7() Specification : CLAMPING BUSH TO DRG.NO.3-027321, DETAIL NO.15 DC 36050-AFOR PRIMER GUV-7 C Estab
13) 6410900880 CUP FOR PRIMER GUV-7 Description : 6410900880 CUP FOR PRIMER GUV-7() Specification : DRG.NO.3-027321, C Estab
14) 6410900900 OBTURATING DEVICE ASSEMBLY CD1 Description : 6410900900 OBTURATING DEVICE ASSEMBLY CD1() Specification : OBTURATING DEVICE TO DRG NO.3-027321 DET.NO.CD1 DC NO.35893-A CONSISTS OF 1) SCREW DET.NO.1 DC NO.35802-A2) CONICAL SHUTTER DET.NO.2 DC NO.35802-A 3) BUSH DET.NO.3DC NO. 35802-A 4) RING DET.NO.25 DC NO.36050-A (WITHOUTPAPER DISC DET.NO.4 C Estab
15) 6410900990 OBTURATOR DET NO 8 PRIMER GUV 7 Description : 6410900990 OBTURATOR DET NO 8 PRIMER GUV 7() Specification : OBTURATOR TO DRG.NO.3-027321, DETAIL NO.8, DC-36050-ADT.05-12-95 FOR PRIMER GUV-7. C Estab
16) 6419000027 PRIMER GUV 7 E COMPLETE FOR 125MM Description : 6419000027 PRIMER GUV 7 E COMPLETE FOR 125MM() Specification : EMPTY COMPONENTS OF PRIMER GUV-7, CONSISTING OF BODY TO DRGNO. 3-027321 DET 5, CUP DET 7, OBTURATOR DET 8, COVER OFOBTURATOR DET 10, CLAMPING BUSH DET 15, PACKING RING DET 6,CLAMPING NUT & BASE ASSLY DET CD4 AND OBTURATING DEVICE C C Estab
Category : p
Grade : 3
Size : S
2823 NAGPUR FIBROPACK PVT.LTD.
72, DONGRE LAYOUT, ABHAYANKAR NAGAR NAGPUR MAHARASHTRA
PIN1 : 440010
Phone No. : 0712-2223722 		AAACN6266G

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Corrugated Card Board Box Description : Corrugated Card Board Box() Specification : DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) PAPER KRAFT AMMUNITION Description : PAPER KRAFT AMMUNITION() Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-017: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - R Estab
2) PAPER WRAPPING WAXED CRAFT AMMUN Description : PAPER WRAPPING WAXED CRAFT AMMUN() Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05-2013 REV.NO 4, DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG. R Estab
3) CARTRIDGING PAPER Gr II Description : CARTRIDGING PAPER Gr II() Specification : CARTRIDGING PAPER GR-2 MACHINE GLASED(ONE SIDE ONLY) IN ROLL,BOBBIN DIA OF 800 MM, BOBBIN CENTER SLEEVE DIA OF 70 MM AND ROLL WIDTH OF 170 MM AS PER SPECN IS:1397 : 1990,Second Revision (Amendment NO 1)REAFFIRMED 2002. R Estab
Category : p
Grade : 3
Size : S
2824 KARNATAKA CNC TECH. PVT. LTD.
D-103, INDUSTRIAL ESTATE, RAJAJI NAGAR, BENGALURU KARNATAKA
PIN1 : 560010
Phone No. : 080 2350 2346 		BLRA05957A

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) Receiver Blank to Drg No M 9403B Description : Receiver Blank to Drg No M 9403B() Specification : Store Drg No M-8194B C Estab
2) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B Description : RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B() Specification : AS PER DRAWING C Estab
3) SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol Description : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol() Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol C Estab
4) MAGAZINE BOX AK 630 ASSY. 01 Description : MAGAZINE BOX AK 630 ASSY. 01() Specification : AS PER REQUIRED DRG. C Estab
5) MACHINING OF CRADEL Description : MACHINING OF CRADEL() Specification : MACHINING OF CRADEL FOR AK-630M TO SB-101 FROM CAS C Estab
6) WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N Description : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG N() Specification : WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG NO. NAD 1025/2 ARD 2431 C Estab
Category : dp
Grade : 1
Size : S
2825 G.M.T. UDYOG
167-A, ANANDAMATH, ICHAPUR, 24 PARGANAS (N) WEST BENGAL
PIN1 : 743144
Phone No. : 9433461011
GSTIN : 19AJCPG0113D1Z1 		AJCPG0113D

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) INDEXABLE INSERTED DRILL Description : INDEXABLE INSERTED DRILL() Specification : INDEXABLE INSERTED DRILL (DIA:18 MM / FLAT BOTTOM) S Estab
2) INSERTED U DRILL Description : INSERTED U DRILL() Specification : INSERTED U DRILL (DIA:18 MM) S Estab
3) SAFETY LEVER TO DRG NO PB 6 AS FINISHED COMPONENTS Description : SAFETY LEVER TO DRG NO PB 6 AS FINISHED COMPONENTS() Specification : SAFETY LEVER TO DRG. NO. PB-6 AS FINISHED COMPONENTS C Estab
4) CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION Description : CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION() Specification : CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION. C Estab
5) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION Description : TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
6) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION) Description : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)() Specification : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION) C Estab
7) DUMMY CARTRIDGE Description : DUMMY CARTRIDGE() Specification : DUMMY CARTRIDGE TO M-8237(PB-48) IN F/C C Estab
8) BORE CLEANING BRUSH TO DRG. NO.M-9106A FOR 0.32" PISTOL Description : BORE CLEANING BRUSH TO DRG. NO.M-9106A FOR 0.32" PISTOL() Specification : DRG. NO.M-9106A FOR 0.32" PISTOL C Estab
9) BOX SPARE SPRING KEEP PIN WASHER INSULATOR Description : BOX SPARE SPRING KEEP PIN WASHER INSULATOR() Specification : BOX SPARE SPRING KEEP PIN WASHER & INSULATOR F/C C Estab
10) HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION Description : HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION() Specification : HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION C Estab
11) PILLAR ASSY. TO DRG. NO.F-1303-030820B (DC NO. 19047-W dt. 02.05.07) IN F/C. Description : PILLAR ASSY. TO DRG. NO.F-1303-030820B (DC NO. 19047-W dt. 02.05.07) IN F/C.() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
2826 SETH NANDRAM DAULATRAM BIYANI
C-1, INDUSTRIAL AREA, HANUMANGARH JN. HANUMANGARH RAJASTHAN
PIN1 : 335512
Phone No. : 9314438806/07 		JDHS06653D

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Potassium Nitrate Gr.I Description : Potassium Nitrate Gr.I() Specification : POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2003 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE. R Estab
Category : p
Grade : 3
Size : S
2827 VRC PLASTO MOULD(I) PVT LTD
EL-21, Electronic Zone, MIDC, Hingna Road, Nagpur-440016 Hingna Road, Nagpur Maharashtra
PIN1 : 440016
Phone No. : 07104242962 		NGPV02836B

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1020611428 POLY GRANULES LD JSS 9330 03 1995 Description : 1020611428 POLY GRANULES LD JSS 9330 03 1995() Specification : JSS: 9330-03: 2007 C Estab
2) 6273200026 OBTURATOR TO DRG NO CQA 155 1140 Description : 6273200026 OBTURATOR TO DRG NO CQA 155 1140() Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB). C Estab
3) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB Description : 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Estab
4) 6491338958 PLUG FUZE HOLE 35 MM FOR 81 MM HE Description : 6491338958 PLUG FUZE HOLE 35 MM FOR 81 MM HE() Specification : PLUG,FUZE HOLE,35 MM NO.6,DESIGNER REF. CIA/AMN/2125 PART NO.ITV 95 DC NO.36172-A. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT Description : GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT() Specification : GRUMMET ASSY CONSISTING OF (1) GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF. OFBL DRG.NO: BL/PB/U-5/343). C Estab
Category : p
Grade : 3
Size : S
2828 HETAL IMPEX
C/601, ADARSH GALAXY ADARSH VIHAR COMPLEX MARVE ROAD MALAD(w) MUMBAI MAHARASHTRA
PIN1 : 400064
Phone No. : 09167859568 		AAEHR1704E

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) METHANOL Description : METHANOL() Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006. R Estab
2) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
Category : s
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) METHANOL Description : METHANOL() Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006. R Estab
2) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
Category : s
Grade : 1
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 P Estab
2) 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988 Description : 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988() Specification : IS-245-198 P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV) Description : 1001010101 ACETONE TO SPECN.IS-170-1986(3RDRV)() Specification : SPECN NO.IS:170-1986 P Estab
2) 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988 Description : 1001773400 TRICHLORO ETHYLENE TECH IS 245 1988() Specification : IS-245-198 P Estab
Category : p
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) SODA ASH COMMERCIAL GRADE Description : SODA ASH COMMERCIAL GRADE() Specification : C.F.SPECN.No. 39.0 Dt. 29-06-2006 (REV. No.1) Dt. 01-12-2016 R Estab
2) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : GLYCERINE (FOR NITRATION) SPECN : JSS 6810-109:2013 (REVISION NO.3) DC 5219-ME DATED 12-04-2014 PURITY-MINIMUM 99.3% R Estab
3) DIETHYLPHTHLATE Description : DIETHYLPHTHLATE() Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG. R Estab
Category : s
Grade : 3
Size : S
1) Cordite Factory Arvankadu

[ENR Registration]
Name Specification Use Status
1) SODA ASH COMMERCIAL GRADE Description : SODA ASH COMMERCIAL GRADE() Specification : C.F.SPECN.No. 39.0 Dt. 29-06-2006 (REV. No.1) Dt. 01-12-2016 R Estab
2) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : GLYCERINE (FOR NITRATION) SPECN : JSS 6810-109:2013 (REVISION NO.3) DC 5219-ME DATED 12-04-2014 PURITY-MINIMUM 99.3% R Estab
3) DIETHYLPHTHLATE Description : DIETHYLPHTHLATE() Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG. R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) BORON POWDER GR I Description : BORON POWDER GR I() Specification : BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05 P Estab
2) BUTYL METHA CRYLATE Description : BUTYL METHA CRYLATE() Specification : G 1) PURITY- MIN 99% 2) SPECIFIC GRAVITY : 0.896 3) BOILING POINT : 162'C 4) FLASH POINT : 46'C 5) SOLUBILITY WATER 0.25 G/L MAX AT 20'C IN ONE LITRE BOTTLE (WITH TEST CERTIFICATE) P Estab
3) HEXANE COMMERCIAL GRADE TO Description : HEXANE COMMERCIAL GRADE TO() Specification : HEXANE ( COMMERCIAL GRADE) TO DOCUMENT NO. 06-7600-2010A 067 P Estab
4) LACTOSE MONOHYDRATED SIZE 1225 MICRON Description : LACTOSE MONOHYDRATED SIZE 1225 MICRON() Specification : LACTOSE MONOHYDRATED SIZE 1225 MICRON P Estab
5) SODIUM NITRATE GRADE I SIZE 125 MICRON Description : SODIUM NITRATE GRADE I SIZE 125 MICRON() Specification : SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134 P Estab
6) TITANIUM DIOXIDE WHITE ANATASE Description : TITANIUM DIOXIDE WHITE ANATASE() Specification : TITANIUM DIOXIDE WHITE ANATASE SPECN. IS-411-1991. THIRD REVISION REAFFIRMED 2002. OLD 9914234617 P Estab
7) TOLUENE NITRATION GRADE TO SPECN Description : TOLUENE NITRATION GRADE TO SPECN() Specification : TOLUENE NITRATION GRADE TO SPECN. IS-537 2011(2ND REVISION) DS CAT NO. 6810-000950 P Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Dehu Road

[ENR Registration]
Name Specification Use Status
1) BORON POWDER GR I Description : BORON POWDER GR I() Specification : BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05 P Estab
2) BUTYL METHA CRYLATE Description : BUTYL METHA CRYLATE() Specification : G 1) PURITY- MIN 99% 2) SPECIFIC GRAVITY : 0.896 3) BOILING POINT : 162'C 4) FLASH POINT : 46'C 5) SOLUBILITY WATER 0.25 G/L MAX AT 20'C IN ONE LITRE BOTTLE (WITH TEST CERTIFICATE) P Estab
3) HEXANE COMMERCIAL GRADE TO Description : HEXANE COMMERCIAL GRADE TO() Specification : HEXANE ( COMMERCIAL GRADE) TO DOCUMENT NO. 06-7600-2010A 067 P Estab
4) LACTOSE MONOHYDRATED SIZE 1225 MICRON Description : LACTOSE MONOHYDRATED SIZE 1225 MICRON() Specification : LACTOSE MONOHYDRATED SIZE 1225 MICRON P Estab
5) SODIUM NITRATE GRADE I SIZE 125 MICRON Description : SODIUM NITRATE GRADE I SIZE 125 MICRON() Specification : SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134 P Estab
6) TITANIUM DIOXIDE WHITE ANATASE Description : TITANIUM DIOXIDE WHITE ANATASE() Specification : TITANIUM DIOXIDE WHITE ANATASE SPECN. IS-411-1991. THIRD REVISION REAFFIRMED 2002. OLD 9914234617 P Estab
7) TOLUENE NITRATION GRADE TO SPECN Description : TOLUENE NITRATION GRADE TO SPECN() Specification : TOLUENE NITRATION GRADE TO SPECN. IS-537 2011(2ND REVISION) DS CAT NO. 6810-000950 P Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2015 REVISION NO 3. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Di-Phenyl Amine Description : Di-Phenyl Amine() Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2015 REVISION NO 3. R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) ORTHO PHOSPHORIC ACID Description : ORTHO PHOSPHORIC ACID() Specification : AS PER REQUIREMENT C Estab
2) CAUSTIC SODA Description : CAUSTIC SODA() Specification : AS PER REQUIREMENT C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) ACETONE Description : ACETONE() Specification : IS-170-2004 FOURTH REVISION. REAFF. 2015. R Estab
2) SODA ASH Description : SODA ASH() Specification : SODA ASH FOR EFFLUENT TREATMENT COMMERCIAL PURITY 97.5%. SPECIFICATION OFI/0061/SPN DT.11-12 97. R Estab
3) CASTIC SODA LYE Description : CASTIC SODA LYE() Specification : CASTIC SODA LYE (47 % +- 1%) IN 200LITER IN HDPE BARREL. R Estab
4) GLYCERINE FOR NITRATION Description : GLYCERINE FOR NITRATION() Specification : JSS 6810-109:207 REV. NO-2 DC NO:3904-ME DT. 21/07/2010 R Estab
Category : ddp
Grade : 1
Size : S
2829 SRI LAXMI INDUSTRIES
H.NO. 7-8-222/5, OLD AIRPORT ROAD, GOUTHAM NAGAR, FEROZGUDA, SECUNDERABAD TELANGANA
PIN1 : 500011
Phone No. : 040 2775 0400 		ABSFS2943K

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) RECEIVER TO DRG NO CTM 0108 1 TO CTM 0108 6 Description : RECEIVER TO DRG NO CTM 0108 1 TO CTM 0108 6() Specification : AS PER DRAWING C Estab
2) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B Description : RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B() Specification : AS PER DRAWING R Estab
Category : ddp
Grade : 2
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN FIRING for MAG Description : PIN FIRING for MAG() Specification : PIN FIRING,DS CAT NO.1005-006641 IN FINISHED CONDITION (MATERIAL TO BE ISSUED AGAINST BANK GUARANTEE) MAG 7.62 MM DC(I) NO. 25325-SA, DT.10.04.2002 C Estab
Category : p
Grade : 3
Size : S
1) Field Gun Factory Kanpur

[ENR Registration]
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394 Description : BARREL BLANK AS PER DRG. NO. SK-01394() Specification : AS PER SPECIFICATION/REQUIREMENT C Estab
2) CYLINDER Description : CYLINDER() Specification : AS PER DRG. NO. SK-01444 C Estab
3) FINISH MACHINING OF VARIOUS MECH. COMPONENTS Description : FINISH MACHINING OF VARIOUS MECH. COMPONENTS() Specification : FINISH MACHINING OF CATCH SAFE CATCH FIRE C Estab
4) PLATE BODY TO DRG. NO. 32-0501 MK-III Description : PLATE BODY TO DRG. NO. 32-0501 MK-III() Specification : PLATE BODY TO DRG. NO. 32-0501 MK-III MATERIAL:-BS 970 Pt.1: 1983 Gd. 070 M-55 (BS 970 EN-9), FINISH:-ELECTROSTATIC POWDER COATING AFTER ASSY. ALT MATERIAL FROM IC ROUTE:-BS 3146 PT.1 1974 TYPE CLASS-8. C Estab
5) SEMI FINISHED BARREL Description : SEMI FINISHED BARREL() Specification : AS PER DRG. NO. 01445 C Estab
6) SLEEVES Description : SLEEVES() Specification : AS PER D.S. CAT. NO. 3120-004660 C Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG() Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02 C Estab
Category : p
Grade : 3
Size : S
2830 KIRLOSKAR BROTHERS LIMITED
"YAMUNA", S.NO. 98/3 TO 7, BANER, PUNE MAHARASHTRA
PIN1 : 411045
Phone No. : 020 2721 4241 		AAACK7300E

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB Description : COOLING TANK WITH PUMP UNIT AK-630 Assy. 117/50 SB() Specification : As per Drawing C Estab
2) PUMP SET Description : PUMP SET() Specification : PUMP SET MODEL : UP 150-38B MAKE : KIRLOSKAR C Estab
Category : ddp
Grade : 3
Size : S
2831 SUYOG CHEMICALS PVT. LTD.
AMRTA MANOR BUNGLOW NO. 1, 1ST FLOOR RAVINDRANATH TAGORE MARG, CIVIL LINES NAGPUR MAHARASHTRA
PIN1 : 440001
Phone No. : 07122520437 		S2842NGPA1

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Plasticizer Ester type-1(DBP) Description : Plasticizer Ester type-1(DBP)() Specification : Specn-IS:14421-1997 Reaffirmed 2003 with ammend No 1 of March2003 R Estab
Category : dp
Grade : 3
Size : S
2832 ESKAY ENGINEERING
GARUI, RABINDRANAGAR, RABINDRA SARANI, KOLKATA WEST BENGAL
PIN1 : 700065
Phone No. : 033 2566 2779
GSTIN : 19ADXPG9760D1ZY 		CALS26215A

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) SCREW B6 LS 12 X 22 D 80 N2 71 FOR L 70 GUN IN FINISHED CONDITION Description : SCREW B6 LS 12 X 22 D 80 N2 71 FOR L 70 GUN IN FINISHED CONDITION() Specification : SCREW B6 LS-12 X 22 D 80 (N2-71) FOR L-70 GUN IN FINISHED CONDITION C Estab
2) NUT LOCK ELASTIC TOP N3 13 12 FOR L 70 GUN IN FINISHED CONDITION Description : NUT LOCK ELASTIC TOP N3 13 12 FOR L 70 GUN IN FINISHED CONDITION() Specification : NUT LOCK ELASTIC TOP N3-13-12 FOR L-70 GUN IN FINISHED CONDITION C Estab
3) TORRIC JOINT TO DRG No IMR 360 IN FINISHED CONDITION Description : TORRIC JOINT TO DRG No IMR 360 IN FINISHED CONDITION() Specification : TORRIC JOINT TO DRG. No. IMR-360 IN FINISHED CONDITION C Estab
4) WASHER TO DET 2 TO SK NO ST SA 002 FOR DUMMY Description : WASHER TO DET 2 TO SK NO ST SA 002 FOR DUMMY() Specification : WASHER TO DET.2 (TO SK. NO. ST/SA/002) FOR DUMMY C Estab
5) BUSHING III DET 14 TO SK NO ST SA 001 FOR DUMMY Description : BUSHING III DET 14 TO SK NO ST SA 001 FOR DUMMY() Specification : BUSHING III, DET. 14 (TO SK. NO. ST/SA/001) FOR DUMMY C Estab
6) CAP IN FINISHED CONDITION TO DRG NO M 10333 ITEM NO 6 Description : CAP IN FINISHED CONDITION TO DRG NO M 10333 ITEM NO 6() Specification : CAP IN FINISHED CONDITION TO DRG. NO. M-10333 ITEM NO. 6 C Estab
7) CATCH TO D S CAT NO 5340 015119 D C I NO 25471 SA Description : CATCH TO D S CAT NO 5340 015119 D C I NO 25471 SA() Specification : CATCH TO D.S CAT. NO. 5340-015119 D.C (I) NO. 25471-SA C Estab
8) SPRING 5360 000747 Description : SPRING 5360 000747() Specification : SPRING TO D. S. CAT NO 5360-000747DC NO. 23095-SA C Estab
9) CLIP SPRING 5340 015295 Description : CLIP SPRING 5340 015295() Specification : CLIP SPRING TO D.S. CAT NO 5340-015295 IN FINISHED CONDITION C Estab
10) SIGHT GRENADE TO D S CAT NO 1005 001755 IN FINISHED Description : SIGHT GRENADE TO D S CAT NO 1005 001755 IN FINISHED() Specification : AS PER DRAWING C Estab
11) SPIGOT TO D S CAT NO 1005 001756 DC I NO 21470 SA Description : SPIGOT TO D S CAT NO 1005 001756 DC I NO 21470 SA() Specification : SPIGOT TO D.S CAT. NO. 1005-001756 DC(I) NO. 21470-SA C Estab
12) SPRING 1005 001757 Description : SPRING 1005 001757() Specification : SPRING TO D.S. CAT NO 1005-001757 C Estab
13) WASHER 003178 Description : WASHER 003178() Specification : WASHER TO D.S CAT. NO. 5310-003178 IN FINISHED CONDITION C Estab
14) SAFETY LEVER TO DRG NO PB 6 AS FINISHED COMPONENTS Description : SAFETY LEVER TO DRG NO PB 6 AS FINISHED COMPONENTS() Specification : SAFETY LEVER TO DRG. NO. PB-6 AS FINISHED COMPONENTS C Estab
15) CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION Description : CATCH MAGAZINE TO SK NO CTM 0032 A PB 9 WITHOUT NICKEL PLATING IN FINISHED CONDITION() Specification : CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION. C Estab
16) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION Description : TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION() Specification : AS PER DRAWING C Estab
17) SPRING SEAR AND LEVER SEAR TO DRG NO M 8275B PB 11 IN F C Description : SPRING SEAR AND LEVER SEAR TO DRG NO M 8275B PB 11 IN F C() Specification : SPRING SEAR AND LEVER SEAR TO DRG. NO. M-8275B (PB-11) IN F/C C Estab
18) PLATE LEVER SEAR TO DRG NO M 8276A PB 12 IN F C Description : PLATE LEVER SEAR TO DRG NO M 8276A PB 12 IN F C() Specification : PLATE LEVER SEAR TO DRG. NO. M-8276A (PB-12) IN F/C C Estab
19) LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION Description : LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION() Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL C Estab
20) PIN FIRING REAR TO DRG NO CTM 0024 PB 17 IN F C Description : PIN FIRING REAR TO DRG NO CTM 0024 PB 17 IN F C() Specification : PIN FIRING REAR TO DRG. NO. CTM-0024 (PB-17) IN F/C C Estab
21) PIN FIRING FRONT Description : PIN FIRING FRONT() Specification : PIN FIRING FRONT TO DRG. NO. PB-22 AS FINISHED CONDITION C Estab
22) PIN SEAR CTM 0040 A Description : PIN SEAR CTM 0040 A() Specification : PIN SEAR TO DRG. NO. CTM-0040-A (PB-24) IN F/C C Estab
23) SCREW STOCK TO DRG NO CTM 0025 A PB 26 F C Description : SCREW STOCK TO DRG NO CTM 0025 A PB 26 F C() Specification : SCREW STOCK TO DRG. NO. CTM-0025-A (PB-26) F/C C Estab
24) PLUNGER TO DRG NO CTM 0021 A PB 37 F C Description : PLUNGER TO DRG NO CTM 0021 A PB 37 F C() Specification : PLUNGER TO DRG NO CMT-0021 A (PB-37) F/C C Estab
25) PIN SOCKET TO DRG NO CTM 0027A PB 40 AS F COMP Description : PIN SOCKET TO DRG NO CTM 0027A PB 40 AS F COMP() Specification : PIN SOCKET TO DRG. NO. CTM-0027A (PB-40) AS F/COMP C Estab
26) CAP SPRING RETURN WITHOUT NICKET PLATING TO DRG NO Description : CAP SPRING RETURN WITHOUT NICKET PLATING TO DRG NO() Specification : CAP SPRING RETURN WITHOUT NICKET PLATING TO DRG NO C Estab
27) PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6 Description : PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6() Specification : AS PER DRAWING C Estab
28) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION) Description : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)() Specification : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION) C Estab
29) EXTRACTOR WITHOUT NICKEL PLATING TO DRG NO CMT 004 Description : EXTRACTOR WITHOUT NICKEL PLATING TO DRG NO CMT 004() Specification : EXTRACTOR WITHOUT NICKEL PLATING TO DRG NO CMT-004 C Estab
30) PIN HOUSING LEVER SEAR DRG NO CTM 0041 A PB 25 IN FINISHED CONDITION Description : PIN HOUSING LEVER SEAR DRG NO CTM 0041 A PB 25 IN FINISHED CONDITION() Specification : PIN HOUSING LEVER SEAR DRG. NO. CTM-0041-A (PB-25) IN FINISHED CONDITION C Estab
31) SOCKET WITHOUT NICKEL PLATING TO DRG NO CTM 0020 A Description : SOCKET WITHOUT NICKEL PLATING TO DRG NO CTM 0020 A() Specification : SOCKET WITHOUT NICKEL PLATING TO DRG. NO. CTM-0020-A C Estab
32) PIN ROLLER HAMMER TO DRG No CTM 0026A PB 43 IN F C Description : PIN ROLLER HAMMER TO DRG No CTM 0026A PB 43 IN F C() Specification : PIN ROLLER HAMMER TO DRG. No. CTM-0026A (PB-43 IN F/C C Estab
33) EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC Description : EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC() Specification : AS PER DRAWING C Estab
34) SPRING PLUNGER ODC 013 IN F C Description : SPRING PLUNGER ODC 013 IN F C() Specification : SPRING PLUNGER (ODC-013) IN F/C C Estab
35) SPRING FINISHED TO DRG NO 6097131 Description : SPRING FINISHED TO DRG NO 6097131() Specification : SPRING FINISHED TO DRG. NO. 6097131 C Estab
36) SPRING IN FINISHED CONDITION TO DRG NO 6135082 Description : SPRING IN FINISHED CONDITION TO DRG NO 6135082() Specification : SPRING IN FINISHED CONDITION TO DRG. NO. 6135082 C Estab
37) FABRICATION OF ROCKING SHAFT() FABRICATION OF ROCKING SHAFT IN F/C C Estab
38) NUT IN F C TO DRG NO N3 14 X 10 FOR B C OF L 70 GUN Description : NUT IN F C TO DRG NO N3 14 X 10 FOR B C OF L 70 GUN() Specification : NUT IN F/C TO DRG. NO. N3-14X10 FOR B/C OF L/70 GUN C Estab
39) SPRING IN FINISHED CONDITION TO DRG NO 6148363 Description : SPRING IN FINISHED CONDITION TO DRG NO 6148363() Specification : SPRING IN FINISHED CONDITION TO DRG NO 6148363 C Estab
40) SPRING H A TO DRG NO BOF 6139886 F C Description : SPRING H A TO DRG NO BOF 6139886 F C() Specification : SPRING (H/A) TO DRG. NO. BOF-6139886 F/C C Estab
41) SPRING TO DRG NO ARDE 1593() SPRING IN F/C TO DRG NO ARDE 1593, DET.NO.6 C Estab
42) SPRING HELICAL COMPRESSION D.S.CAT NO:5360-01729 Description : SPRING HELICAL COMPRESSION D.S.CAT NO:5360-01729() Specification : AS PER DRAWING C Estab
43) SCREW SET 5305 007372 Description : SCREW SET 5305 007372() Specification : SCREW SET TO DS CAT NO. 5305.007372 C Estab
44) SPRING HELICAL COMPRESSION IN FINISH CONDITION TO D S CAT NO 5360 006650 Description : SPRING HELICAL COMPRESSION IN FINISH CONDITION TO D S CAT NO 5360 006650() Specification : SPRING HELICAL COMPRESSION IN FINISH CONDITION TO D S CAT NO 5360 006650 C Estab
45) ROD GUIDE TO DRG NO ARDE 1593() ROD GUIDE TO DRG NO ARDE 1593, DETAIL NO. 2 IN F/C C Estab
46) PIN CYLINDRICAL 4 X 30 DRG IMR 374 5315000294 F C Description : PIN CYLINDRICAL 4 X 30 DRG IMR 374 5315000294 F C() Specification : PIN CYLINDRICAL 4 X 30 DRG. IMR 374 (5315000294) F/C C Estab
47) WASHER REAR SIGHT SCREW Description : WASHER REAR SIGHT SCREW() Specification : WASHER REAR SIGHT SCREW TO DRG. No. GF-235063 C Estab
48) TURNING KNOB REAR SIGHT TO DRG NO GF 235 Description : TURNING KNOB REAR SIGHT TO DRG NO GF 235() Specification : TURNING KNOB REAR SIGHT TO DRG NO: GF-235 C Estab
49) SPRING REAR SIGHT SCREW TO DRG No GF 235064 Description : SPRING REAR SIGHT SCREW TO DRG No GF 235064() Specification : SPRING REAR SIGHT SCREW TO DRG. No. GF-235064 C Estab
50) RETAINING CATCH SHOULDER PAD Description : RETAINING CATCH SHOULDER PAD() Specification : RETAINING CATCH SHOULDER PAD TO DRG. No. G C Estab
51) RETAINING KNOB SHOULDER PAD Description : RETAINING KNOB SHOULDER PAD() Specification : RETAINING KNOB SHOULDER PAD TO DRG. No. GF C Estab
52) PIN TO DRG No GF 91636 Description : PIN TO DRG No GF 91636() Specification : PIN TO DRG. No. GF 91636 C Estab
53) FORE SIGHT CATCH TO DRG NO 125027 1311 250270 Description : FORE SIGHT CATCH TO DRG NO 125027 1311 250270() Specification : FORE SIGHT CATCH TO DRG. NO. 125027 (1311-250270) C Estab
54) FORE SIGHT SCREW TO DRG No GF 125026 Description : FORE SIGHT SCREW TO DRG No GF 125026() Specification : FORE SIGHT SCREW TO DRG. No. GF-125026 C Estab
55) NUT FORE SIGHT SCREW ML 6 MM Description : NUT FORE SIGHT SCREW ML 6 MM() Specification : NUT FORE SIGHT SCREW TO DRG. No. ML 6 MM C Estab
56) TRIGGER SPRING 165140 Description : TRIGGER SPRING 165140() Specification : TRIGGER SPRING TO DRG. NO. IRCL 564 (GF 165140L) IN F/C C Estab
57) AXIS PIN TRIGGER TO DRG NO 125073 Description : AXIS PIN TRIGGER TO DRG NO 125073() Specification : AXIS PIN TRIGGER TO DRG NO -125073 C Estab
58) AXIS PIN TRIGGER SEAR TO DRG NO 125074 Description : AXIS PIN TRIGGER SEAR TO DRG NO 125074() Specification : AXIS PIN TRIGGER SEAR TO DRG NO-125074 C Estab
59) SPRING TRIGGER SEAR TO DRG NO IRCL 538 GF 125075 Description : SPRING TRIGGER SEAR TO DRG NO IRCL 538 GF 125075() Specification : SPRING TRIGGER SEAR TO DRG NO IRCL 538 (GF 125075 L) F/C C Estab
60) FRONT SUPPORT FOR MECH TUBE GF 125093 Description : FRONT SUPPORT FOR MECH TUBE GF 125093() Specification : FRONT SUPPORT FOR MECH TUBE TO DRG. GF-125093 C Estab
61) SPRING TO DRG NO IQW 159 IN FC() SPRING TO DRG NO IQW 159 IN FC C Estab
62) CAP FRONT ASSEMBLY 230031 Description : CAP FRONT ASSEMBLY 230031() Specification : CAP FRONT ASSEMBLY TO DRG. No. 230031 C Estab
63) SPRING DRG. NO. AK630 106 21() SPRING DRG. NO. AK630 106 21 C Estab
64) CAP REAR TO DRG NO GF 125078 IN F C Description : CAP REAR TO DRG NO GF 125078 IN F C() Specification : CAP REAR TO DRG. NO. GF/125078 IN F/C C Estab
65) STOP BOLT TO DRG NO GF 125061L F 1311 250610 Description : STOP BOLT TO DRG NO GF 125061L F 1311 250610() Specification : STOP BOLT TO DRG. NO. GF-125061 (F-1311-250610) C Estab
66) CAP FRONT TO DRG No GF 215041 DC 18893 W DT 15 1 0 Description : CAP FRONT TO DRG No GF 215041 DC 18893 W DT 15 1 0() Specification : CAP FRONT TO DRG. No. GF-215041 DC 18893-W DT 15/1/0 C Estab
67) NUT FORE SIGHT TO PART No M 1490 224312 Description : NUT FORE SIGHT TO PART No M 1490 224312() Specification : NUT FORE SIGHT TO PART No. M 1490-224312 C Estab
68) SPRING AK630 101 48 TO DRG NO AK630 101() SPRING (AK630 101.48) TO DRG NO AK630.101 C Estab
69) PIN FIRING ROD HEAD M 1108 14 Description : PIN FIRING ROD HEAD M 1108 14() Specification : PIN FIRING ROD HEAD TO PART No. M 1108-14 C Estab
70) ADJUSTING SCREW INSIDE TO DRG No GF 165041 Description : ADJUSTING SCREW INSIDE TO DRG No GF 165041() Specification : ADJUSTING SCREW INSIDE TO DRG. No. GF-165041 C Estab
71) SPRING DRG. NO. AK630 106 4() SPRING DRG. NO. AK630 106 4 C Estab
72) FIRING PIN HOUSING GF 215046 Description : FIRING PIN HOUSING GF 215046() Specification : FIRING PIN HOUSING TO DRG. No. GF-215046 C Estab
73) ORDNANCE 84 MM ROCKET LAUNCHER BARREL VENTURY ASSEMBLY Description : ORDNANCE 84 MM ROCKET LAUNCHER BARREL VENTURY ASSEMBLY() Specification : ORDNANCE 84 MM ROCKET LAUNCHER BARREL VENTURY ASSEMBLY C Estab
74) O RING CAP REAR 16 point 3 X 2 point 4 MM IN F C Description : O RING CAP REAR 16 point 3 X 2 point 4 MM IN F C() Specification : O RING CAP REAR 16.3 X 2.4 MM IN F/C C Estab
75) NUT SHOULDER PAD F 1303 030670 Description : NUT SHOULDER PAD F 1303 030670() Specification : NUT SHOULDER PAD F1303-030670B (GSF : RRP040000) F/C C Estab
76) SCREW COCKING LEVEL F 1303 030690 C Description : SCREW COCKING LEVEL F 1303 030690 C() Specification : SCREW COCKING LEVEL TO DRG. No. F1303-030690C IN F/C C Estab
77) SLOTTED RAISED COUNTERSUNK HEAD SCREW ISO 2010 M 5 Description : SLOTTED RAISED COUNTERSUNK HEAD SCREW ISO 2010 M 5() Specification : SLOTTED RAISED COUNTERSUNK HEAD SCREW ISO 2010 M-5 C Estab
78) SPRING PIN ISO 8752 3X28 ST TO DRG NO M1108 143214 Description : SPRING PIN ISO 8752 3X28 ST TO DRG NO M1108 143214() Specification : SPRING PIN ISO 8752-3X28-ST TO DRG No M1108-143214 C Estab
79) FIRING PIN HOUSING F 1303 007500 D Description : FIRING PIN HOUSING F 1303 007500 D() Specification : FIRING PIN HOUSING F1303-007500D DRG. No. RRF070210 C Estab
80) MAIN SPRING TO DRG NO IRCL 571 GF 215032 Description : MAIN SPRING TO DRG NO IRCL 571 GF 215032() Specification : MAIN SPRING TO DRG NO IRCL 571 (GF 215032 H) F/C C Estab
81) SPRING PIN M 1108 143164 Description : SPRING PIN M 1108 143164() Specification : SPRING PIN 2 X 8-ST PART NO M1108-143164 DOC. NO : 30 C Estab
82) CLEANING ROD ASSY TO DRG NO IRCL 545 GF 125251H IN F C Description : CLEANING ROD ASSY TO DRG NO IRCL 545 GF 125251H IN F C() Specification : CLEANING ROD ASSY TO DRG NO- IRCL 545 (GF-125251H) IN F/C C Estab
83) RETAINING PLATE 125019 Description : RETAINING PLATE 125019() Specification : RETAINING PLATE TO DRG. NO. IRCL 530 (GF-125019J) C Estab
84) SPRING REAR SIGHT SCREW DRG NO IRCL 599 GF 235064 H Description : SPRING REAR SIGHT SCREW DRG NO IRCL 599 GF 235064 H() Specification : SPRING REAR SIGHT SCREW DRG NO. IRCL 599 (GF 235064 H) C Estab
85) SLOTTED COUNTERSUNK HEAD SCREW M 1420 11732 Description : SLOTTED COUNTERSUNK HEAD SCREW M 1420 11732() Specification : SLOTTED COUNTERSUNK HEAD SCREW PT. NO. M1420-11732 C Estab
86) SPRING MAIN MARK 2 TO DRG NO NAD 1002C 99 4 Description : SPRING MAIN MARK 2 TO DRG NO NAD 1002C 99 4() Specification : SPRING MAIN, MARK 2 TO DRG. NO. NAD.1002C/99/4 C Estab
87) PIN ITEM 2A PART NO CO 821 RGF 10819 98 F C Description : PIN ITEM 2A PART NO CO 821 RGF 10819 98 F C() Specification : PIN (ITEM-2A) PART NO. : CO-821 RGF-10819/98 F/C C Estab
88) PIN AXIS STIRR UP RGF 10819 98 Description : PIN AXIS STIRR UP RGF 10819 98() Specification : PIN AXIS STIRR UP (ITEM-7) RGF-10819/98 F/C C Estab
89) CRANK HANDLE TO DRG NO CO 817 RGF 10819198 ITEM 1 F C Description : CRANK HANDLE TO DRG NO CO 817 RGF 10819198 ITEM 1 F C() Specification : CRANK HANDLE TO DRG. NO. CO-817 RGF - 10819198 ITEM -1 F/C C Estab
90) SPRING CATCH RETAINING CRANK HANDLE Description : SPRING CATCH RETAINING CRANK HANDLE() Specification : SPRING CATCH RETAINING CRANK HANDLE (ITEM-10) F/C C Estab
91) TRIGGER WITH PIVOT SCREW Description : TRIGGER WITH PIVOT SCREW() Specification : TRIGGER WITH PIVOT SCREW (ITEM-3) IN F/C C Estab
92) CRANK HANDLE MK II NOD 2180 5 F C Description : CRANK HANDLE MK II NOD 2180 5 F C() Specification : CRANK HANDLE MK II (NOD-2180/5) F/C C Estab
93) LOCATOR SPRING TO DRG NO AK 630 101 44 IN F C Description : LOCATOR SPRING TO DRG NO AK 630 101 44 IN F C() Specification : LOCATOR SPRING TO DRG. NO. AK-630 101-44 IN F/C C Estab
94) SPRING TO DRG NO AK 630 102 66 IN F C Description : SPRING TO DRG NO AK 630 102 66 IN F C() Specification : SPRING TO DRG. NO. AK-630 102-66 IN F/C C Estab
95) INNER SPRING Description : INNER SPRING() Specification : INNER SPRING TO DRG. NO. AK-630 106-25 IN F/C C Estab
96) ARMOURED HOSE WIRE SPRING TO DRG NO AK 630 111 42 Description : ARMOURED HOSE WIRE SPRING TO DRG NO AK 630 111 42() Specification : ARMOURED HOSE WIRE / SPRING TO DRG. NO. AK-630 111-42 C Estab
Category : dp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) TRIGGER SPRING TO DRG NO GF 165140 DC I NO 17205 W DT 28 01 92 IN FC Description : TRIGGER SPRING TO DRG NO GF 165140 DC I NO 17205 W DT 28 01 92 IN FC() Specification : TRIGGER SPRING TO DRG NO GF 165140 DC (I)NO 17205-W DT 28.01.92 IN FINISHED CONDITION C Estab
2) SPRING TRIGGER SEAR TO DRG NO GF 125075 TO DC I NO 19106 W DT 16 01 08 IN FINISHED CONDITION Description : SPRING TRIGGER SEAR TO DRG NO GF 125075 TO DC I NO 19106 W DT 16 01 08 IN FINISHED CONDITION() Specification : SPRING TRIGGER SEAR TO DRG NO GF-125075 TO DC(I) NO 19106-W DT 16.01.08 IN FINISHED CONDITION C Estab
3) LOCKING PLATE TO DRG NO GF 125124 D S CAT NO 5365 010060 DC I NO 19106 W DT 16 01 08 IN FINISHED CONDITION Description : LOCKING PLATE TO DRG NO GF 125124 D S CAT NO 5365 010060 DC I NO 19106 W DT 16 01 08 IN FINISHED CONDITION() Specification : LOCKING PLATE TO DRG NO GF 125124 D.S. CAT NO 5365-010060 DC(I) NO: 19106-W DT: 16.01.08 IN FINISHED CONDITION C Estab
4) STOP BOLT TO DRG NO GF 125061 L GSF DRG NO RRF04100 IN FINISHED CONDITION Description : STOP BOLT TO DRG NO GF 125061 L GSF DRG NO RRF04100 IN FINISHED CONDITION() Specification : STOP BOLT TO DRG NO GF 125061 L (GSF DRG NO: RRF04100) IN FINISHED CONDITION C Estab
Category : dp
Grade : 3
Size : S
2833 POLYMER PRODUCTS
E-48, MIDC NAGPUR MAHARASHTRA
PIN1 : 440028
Phone No. : 07104-237595 		AAAPL3440P

Download 		1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) Bag Polythene for packing NC Description : Bag Polythene for packing NC() Specification : BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27. R Estab
2) Bag Polythene (Ser) Description : Bag Polythene (Ser)() Specification : Drg No. OFBA/HEX/30,DTD. 16.01.75 AMENDED ON 24.02.2010 R Estab
Category : dp
Grade : 2
Size : S
2834 ABR ORGANICS LIMITED
A-3, SRI MADHAVA APARTMENT BANK COLONY, BAGH AMBERPET HYDERABAD TELANGANA
PIN1 : 500013
Phone No. : 04065575981 		HYDA06009D

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) PHENOLIC RESIN PR 100 WS GRADE OF ABR ORGANICS OR EQUIV ISRO GRADE Description : PHENOLIC RESIN PR 100 WS GRADE OF ABR ORGANICS OR EQUIV ISRO GRADE() Specification : PHENOLIC RESIN PR-100 WS GRADE OFABR ORGANICS OR EQUIV. ISROGR. WITH VISCOSITY 150 TO 350 CP AT 30 DEGREE & SPECIFICGRAVITY 1.12 TO 1.16 AT 30 DEGREE C,SOLID CONTENT 60 TO 65%POINT OF TROUBLE 6 TO 12 CC R Estab
Category : ddp
Grade : 1
Size : S
2835 INDIA TRADE CENTRE
220A, NASKARPARA ROAD GHUSURY, HOWRAH KOLKATA WEST BENGAL
PIN1 : 711107
Phone No. : nitin_2581@ya 		CALIO 1552

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STRIKER TO CQA AMMN PART NO DRG NO QX 331 DC I 37263 A DT 26 08 10 Description : STRIKER TO CQA AMMN PART NO DRG NO QX 331 DC I 37263 A DT 26 08 10() Specification : STRIKER TO CQA(AMMN) PART NO (DRG.NO.) QX-331 DC(I) 37263-ADT.26.08.10 C Estab
2) SHUTTER TO OFAJ DRG NO FS 957C Description : SHUTTER TO OFAJ DRG NO FS 957C() Specification : SHUTTER TO OFAJ DRG. NO. FS-957C. C Estab
3) MAGAZINE WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2935 Description : MAGAZINE WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2935() Specification : MAGAZINE (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWINGNO.FS-2935 C Estab
Category : ddp
Grade : 1
Size : S
2836 Eagle Paints (India)
1062 Sadar Bazar Sadar Bazar Lucknow Uttar Pradesh
PIN1 : 226002
Phone No. : 9415410256
GSTIN : 09AAWPA3922D1ZS 		AAWPA3922D

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168 Description : 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) P Estab
2) 1011518001 PAINT BLACK MATT FINISH SPRAYING Description : 1011518001 PAINT BLACK MATT FINISH SPRAYING() Specification : SPECN. IS:168-1993 (THIRD REVISION) REAFFIRMED-2002 (AS APPLICABLE FOR DEFENCE USE) P Estab
Category : p
Grade : 3
Size : S
2837 GODSON TAPES PRIVATE LIMITED , Delhi,
224 VARDHMAN FORTUNE MALL G T KARNAL ROAD G T KARNAL ROAD OPP HANS CINEMA NEAR AZADPUR NEW DELHI NEW DELHI
PIN1 : 110033
Phone No. : 7683035536
GSTIN : 07AAFCG9455K1Z3 		AAFCG9455K

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1565241212 TAPE ADHE.INSULTN. 25X0.125MM BLACK Description : 1565241212 TAPE ADHE.INSULTN. 25X0.125MM BLACK() Specification : SPECN. IS: 7809 PART-3, SECTION-1,F PVC/90/0/TP, C Estab
Category : s
Grade : 3
Size : S
2838 MILE STONE GEARS PVT LTD
KK-12 KALKA HARIYANA HARIYANA
PIN1 : 133302
Phone No. : 9817755560 		PLTM11887B

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Art Connecting Rod (opn no.100) Description : Art Connecting Rod (opn no.100)() Specification : 3304-19-4 C Estab
2) Art Connecting Rod (opn no.90) Description : Art Connecting Rod (opn no.90)() Specification : 20-04-19-4 C Estab
Category : dp
Grade : 2
Size : S
2839 CLASSIC INDUSTRIAL CORPORATION, BHUSAWAL
NAGIN PARK, BUS DEPOT BHUSAWAL MAHARASHTRA
PIN1 : 425201
Phone No. : 02582248135 		AFEPJ1570M

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) FABRICATION OF BRACKETS Description : FABRICATION OF BRACKETS() Specification : FABRICATION OF BRACKETS R Estab
Category : p
Grade : 3
Size : S
2840 AVLOCK INTERNATIONAL INDIA PRIVATE LIMITED
Plot No. A165/166, ROAD NO. 27, WAGALE INDUSTRIAL ESTATE, THANE MUMBAI MAHARASHTRA
PIN1 : 400604
Phone No. : 8011213102 		MUMA45563A

Download 		1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Avdel rivet (steel Core) in FC() Specification : SIZE 3/16" X 5/8" LONG C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Avdel rivet (steel Core) in FC() Specification : SIZE 3/16" X 5/8" LONG C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Avdel rivet (steel Core) in FC() Specification : SIZE 3/16" X 5/8" LONG C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Avdel rivet (steel Core) in FC() Specification : SIZE 3/16" X 5/8" LONG C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Avdel rivet (steel Core) in FC() Specification : SIZE 3/16" X 5/8" LONG C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Avdel rivet (steel Core) in FC() Specification : SIZE 3/16" X 5/8" LONG C Estab
Category : dp
Grade : 3
Size : S