List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3081 POLY TRADE (INDIA)
4&5 CANAL WEST ROAD KOLKATA WEST BENGAL
PIN1 : 700015
Phone No. : 8777808522
GSTIN : 19AAEFP9422H1Z0 		CALPO4351E

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300 Description : SHUTTER PLATE TBRL LF NO 9911358300() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Nonestab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526 Description : 3rd SET OF 4 ITEMS FOR MMHG 9911358526() Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS C Nonestab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) 125 MM HEAT BODY() Specification : AS PER DRAWING R Estab
2) BRASS WING NUT() Specification :AS PER DRAWING C Estab
3) .Cone Ring Small() Specification :AS PER DRAWING C Estab
4) Supporting Ring (Front, Middle & Rear)() Specification : AS PER DRAWING C Estab
5) END COVER() Specification : DRG.NO.ARDE 2139,Det.NO.10 C Estab
6) Rib Assy.(Front , Middle & Rear)() Specification : Det-11 to Drg No.ARDE-2139 C Estab
7) VANE ASSY() Specification : AS PER DRAWING C Estab
8) LUG ANCHORING ASSY. Description : LUG ANCHORING ASSY.() Specification : AS PER DRAWING C Estab
9) ARMING FORK Description : ARMING FORK() Specification : DRG NO- ARDE 2121 DET-11 C Estab
10) Bracket for Return Spring() Specification : Det.32 to Drg No.ARDE-2139 C Estab
11) STOPPER FOR LEVER LOCKING() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
12) PLUNGER ASSY.() Specification : DRG NO- ARDE2139 DET 35 C Estab
13) LEVER LOCKING ASSY() Specification :AS PER DRAWING C Estab
14) Tab Washer() Specification : Det.51 to Drg No.ARDE-2139 C Estab
15) .Washer() Specification : AS PER DRAWING C Estab
16) VANE SPINDLE ASSY() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
17) PIN VANE() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
18) PIVOT LEVER LOCKING() Specification : DRG NO- ARDE 2121 DET 7 C Estab
19) ARMING WIRE CLIP() Specification : AS PER DRAWING C Estab
20) ARMING WIRE GUIDE() Specification : AS PER DRAWING C Estab
21) COPPER SLEEVE FOR SHEAR WIRE ASSY() Specification : AS PER SPECIFICATION C Estab
22) COLLER() Specification : DRG.NO.ARDE 2139 DET.NO. 26 C Estab
23) SUPPORT WASHER() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
24) FLEXIBLE DRIVE ADAPTER Description : FLEXIBLE DRIVE ADAPTER() Specification : DRG NO- 2139 DET 57 C Estab
25) CLOSING DISC ASSY() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
26) HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM)() Specification : AS PER DRAWING C Estab
27) FUZE RING (DOUBLE RING HOOK)() Specification : AS PER DRAWING C Estab
28) HOLDER SPRING RACK() Specification :AS PER DRAWING C Estab
29) .Spring Return() Specification : DRG NO- ARDE 2121 C Estab
30) STUD ASSY Description : STUD ASSY() Specification : DRG NO- ARDE 2121 DET 40 C Estab
31) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
32) DIAPHRAGM() Specification : AS PER DRAWING C Estab
33) END COVER WELDING SUB ASSY. Description : END COVER WELDING SUB ASSY.() Specification : AS PER DRAWING C Estab
34) FIN ASSEMBLY() Specification : DET NO.-1 to DRG.NO. ARDE-2121 C Estab
35) PLUNGER ASSY FOR BTU-450 Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
36) COLLAR() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
37) LEVER LOCKING ASSY.() Specification : AS PER DRAWING C Estab
38) ARMING WIRE ASSY() Specification : DET NO-44 ARDE-2121 C Estab
39) LOCKING SLEEVE() Specification : DET NO-15 TO DRG.NO.ARDE-2121 C Estab
40) PIN() Specification :AS PER DRAWING C Estab
41) CONE RING LARGE & PIN LOCATING TU- ASSY() Specification : DET NO.62, ARDE-1947 C Estab
42) FUNNEL ASSY, IN F.C. Description : FUNNEL ASSY, IN F.C.() Specification : DRG NO- ARDE 1947 DET 57 C Estab
43) KIT ARMING & FUZING Description : KIT ARMING & FUZING() Specification : AS PER OFDC SPECIFICATION C Estab
44) ARMING FORK ASSEMBLY IN FC FOR BTU-250 Description : ARMING FORK ASSEMBLY IN FC FOR BTU-250() Specification : DRG.NO.9501-03 , DET NO.-15 C Estab
45) CLIP TRANSIT ASSY IN F C FOR TU TB 250 Description : CLIP TRANSIT ASSY IN F C FOR TU TB 250() Specification : DET.42 TO DRG NO.ARDE-9501-03 C Estab
46) STUD Description : STUD() Specification : ARDE / 9501-03 IN F.C C Estab
47) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
48) Kit Arming & Fuzing components() Specification : AS PER DRAWING C Estab
49) AXLE FIN() Specification : AS PER DRAWING C Estab
50) SAFETY PIN() Specification : AS PER DRAWING C Estab
51) WIND SHIELD() Specification : DRG.Pt.NO.IQX-1010 C Estab
52) SAFETY CAP Description : SAFETY CAP() Specification : AS PER DRAWING C Estab
53) DISC() Specification : AS PER DRAWING C Estab
54) STRIKER Description : STRIKER() Specification : DRG.NO-QX 331 C Estab
55) SEPTUM Description : SEPTUM() Specification : QX- 338 C Estab
56) DETENT Description : DETENT() Specification : DRG.NO.QX-1507 C Estab
57) WORM IN FC() Specification : DRG NO- CM 6822 C Estab
58) BRASS STAMPING WING NUT() Specification : AS PER OFDC SPECIFICATION C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) 125 MM HEAT BODY() Specification : AS PER DRAWING R Estab
2) BRASS WING NUT() Specification :AS PER DRAWING C Estab
3) .Cone Ring Small() Specification :AS PER DRAWING C Estab
4) Supporting Ring (Front, Middle & Rear)() Specification : AS PER DRAWING C Estab
5) END COVER() Specification : DRG.NO.ARDE 2139,Det.NO.10 C Estab
6) Rib Assy.(Front , Middle & Rear)() Specification : Det-11 to Drg No.ARDE-2139 C Estab
7) VANE ASSY() Specification : AS PER DRAWING C Estab
8) LUG ANCHORING ASSY. Description : LUG ANCHORING ASSY.() Specification : AS PER DRAWING C Estab
9) ARMING FORK Description : ARMING FORK() Specification : DRG NO- ARDE 2121 DET-11 C Estab
10) Bracket for Return Spring() Specification : Det.32 to Drg No.ARDE-2139 C Estab
11) STOPPER FOR LEVER LOCKING() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
12) PLUNGER ASSY.() Specification : DRG NO- ARDE2139 DET 35 C Estab
13) LEVER LOCKING ASSY() Specification :AS PER DRAWING C Estab
14) Tab Washer() Specification : Det.51 to Drg No.ARDE-2139 C Estab
15) .Washer() Specification : AS PER DRAWING C Estab
16) VANE SPINDLE ASSY() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
17) PIN VANE() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
18) PIVOT LEVER LOCKING() Specification : DRG NO- ARDE 2121 DET 7 C Estab
19) ARMING WIRE CLIP() Specification : AS PER DRAWING C Estab
20) ARMING WIRE GUIDE() Specification : AS PER DRAWING C Estab
21) COPPER SLEEVE FOR SHEAR WIRE ASSY() Specification : AS PER SPECIFICATION C Estab
22) COLLER() Specification : DRG.NO.ARDE 2139 DET.NO. 26 C Estab
23) SUPPORT WASHER() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
24) FLEXIBLE DRIVE ADAPTER Description : FLEXIBLE DRIVE ADAPTER() Specification : DRG NO- 2139 DET 57 C Estab
25) CLOSING DISC ASSY() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
26) HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM)() Specification : AS PER DRAWING C Estab
27) FUZE RING (DOUBLE RING HOOK)() Specification : AS PER DRAWING C Estab
28) HOLDER SPRING RACK() Specification :AS PER DRAWING C Estab
29) .Spring Return() Specification : DRG NO- ARDE 2121 C Estab
30) STUD ASSY Description : STUD ASSY() Specification : DRG NO- ARDE 2121 DET 40 C Estab
31) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
32) DIAPHRAGM() Specification : AS PER DRAWING C Estab
33) END COVER WELDING SUB ASSY. Description : END COVER WELDING SUB ASSY.() Specification : AS PER DRAWING C Estab
34) FIN ASSEMBLY() Specification : DET NO.-1 to DRG.NO. ARDE-2121 C Estab
35) PLUNGER ASSY FOR BTU-450 Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
36) COLLAR() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
37) LEVER LOCKING ASSY.() Specification : AS PER DRAWING C Estab
38) ARMING WIRE ASSY() Specification : DET NO-44 ARDE-2121 C Estab
39) LOCKING SLEEVE() Specification : DET NO-15 TO DRG.NO.ARDE-2121 C Estab
40) PIN() Specification :AS PER DRAWING C Estab
41) CONE RING LARGE & PIN LOCATING TU- ASSY() Specification : DET NO.62, ARDE-1947 C Estab
42) FUNNEL ASSY, IN F.C. Description : FUNNEL ASSY, IN F.C.() Specification : DRG NO- ARDE 1947 DET 57 C Estab
43) KIT ARMING & FUZING Description : KIT ARMING & FUZING() Specification : AS PER OFDC SPECIFICATION C Estab
44) ARMING FORK ASSEMBLY IN FC FOR BTU-250 Description : ARMING FORK ASSEMBLY IN FC FOR BTU-250() Specification : DRG.NO.9501-03 , DET NO.-15 C Estab
45) CLIP TRANSIT ASSY IN F C FOR TU TB 250 Description : CLIP TRANSIT ASSY IN F C FOR TU TB 250() Specification : DET.42 TO DRG NO.ARDE-9501-03 C Estab
46) STUD Description : STUD() Specification : ARDE / 9501-03 IN F.C C Estab
47) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
48) Kit Arming & Fuzing components() Specification : AS PER DRAWING C Estab
49) AXLE FIN() Specification : AS PER DRAWING C Estab
50) SAFETY PIN() Specification : AS PER DRAWING C Estab
51) WIND SHIELD() Specification : DRG.Pt.NO.IQX-1010 C Estab
52) SAFETY CAP Description : SAFETY CAP() Specification : AS PER DRAWING C Estab
53) DISC() Specification : AS PER DRAWING C Estab
54) STRIKER Description : STRIKER() Specification : DRG.NO-QX 331 C Estab
55) SEPTUM Description : SEPTUM() Specification : QX- 338 C Estab
56) DETENT Description : DETENT() Specification : DRG.NO.QX-1507 C Estab
57) WORM IN FC() Specification : DRG NO- CM 6822 C Estab
58) BRASS STAMPING WING NUT() Specification : AS PER OFDC SPECIFICATION C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) Cone Ring Large & Pin Locating TU-Assy Description :Cone Ring Large & Pin Locating TU-Assy() Specification : Det.-62 ARDE-1947 C Estab
2) Supporting Ring (Front, Middle & Rear) Description : Supporting Ring (Front, Middle & Rear)() Specification :As per Drawing C Estab
3) End Cover Description :End Cover() Specification : Drg.No.ARDE 2139,Det.NO.10 C Estab
4) Rib Assy.(Front , Middle & Rear) Description : Rib Assy.(Front , Middle & Rear)() Specification : Det-11 to Drg No.ARDE-2139 C Estab
5) VANE ASSY Description : VANE ASSY() Specification : As per Drawing C Estab
6) LUG ANCHORING ASSY. Description : LUG ANCHORING ASSY.() Specification : AS PER DRAWING C Estab
7) WORM IN FC Description : WORM IN FC() Specification : DRG NO. CM 6822 C Estab
8) Bracket for Return Spring Description : Bracket for Return Spring() Specification : Det.32 to Drg No.ARDE-2139 C Estab
9) STOPPER FOR LEVEL LOCKING Description : STOPPER FOR LEVEL LOCKING() Specification : DET.33 TO DRG NO.ARDE-2139 C Estab
10) PLUNGER ASSY. Description : PLUNGER ASSY.() Specification : DRG NO- ARDE2139 DET 35 C Estab
11) LEVER LOCKING ASSY Description : LEVER LOCKING ASSY() Specification : AS PER DRAWING C Estab
12) Tab Washer Description : Tab Washer() Specification : Det.51 to Drg No.ARDE-2139 C Estab
13) .Washer Description : .Washer() Specification : AS PER DRAWING C Estab
14) VANE SPINDLE ASSY Description : VANE SPINDLE ASSY() Specification : DET.52 TO DRG NO. ARDE-2139 C Estab
15) PIN VANE Description : PIN VANE() Specification : DRG.NO.ARDE 2139, DET.NO.61 C Estab
16) Pivot Lever Locking Description : Pivot Lever Locking() Specification : Det-7 to Drg No.ARDE-2121 C Estab
17) ARMING WIRE CLIP Description : ARMING WIRE CLIP() Specification : AS PER DRAWING C Estab
18) COPPER SLEEVE FOR SHEAR WIRE ASSY Description : COPPER SLEEVE FOR SHEAR WIRE ASSY() Specification : AS PER SPECIFICATION C Estab
19) COLLER Description : COLLER() Specification : DRG.NO.ARDE 2139 DET.NO. 26 C Estab
20) SUPPORT WASHER Description : SUPPORT WASHER() Specification : DRG.NO. ARDE 2139 DET.NO.24 C Estab
21) FLEXIBLE DRIVE ADAPTER Description : FLEXIBLE DRIVE ADAPTER() Specification : DRG NO- 2139 DET 57 C Estab
22) CLOSING DISC ASSY Description : CLOSING DISC ASSY() Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION C Estab
23) HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM) Description : HOUSING BLOCK & CLEVIES (ANCHORING MECHANISM)() Specification : AS PER DRAWING C Estab
24) FUZE RING (DOUBLE RING HOOK) Description : FUZE RING (DOUBLE RING HOOK)() Specification : AS PER DRAWING C Estab
25) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
26) STUD ASSY Description : STUD ASSY() Specification : DRG NO- ARDE 2121 DET 40 C Estab
27) VANE ASSY FOR BTU-250 Description : VANE ASSY FOR BTU-250() Specification : ARDE 9501-03 , DET.NO.29 C Estab
28) DIAPHRAGM Description : DIAPHRAGM() Specification : AS PER DRAWING C Estab
29) END COVER WELDING SUB ASSY. Description : END COVER WELDING SUB ASSY.() Specification : AS PER DRAWING C Estab
30) FIN ASSEMBLY Description : FIN ASSEMBLY() Specification : DET NO.-1 to DRG.NO. ARDE-2121 C Estab
31) PLUNGER ASSY FOR BTU-450 Description : PLUNGER ASSY FOR BTU-450() Specification : DET-21,ARDE-2121 C Estab
32) COLLAR Description : COLLAR() Specification : DET.17 TO DRG NO.ARDE-2121 C Estab
33) Lever Locking Assy. Description : Lever Locking Assy.() Specification : AS PER DRAWING C Estab
34) ARMING WIRE ASSY Description : ARMING WIRE ASSY() Specification : DET NO-44 ARDE-2121 C Estab
35) LOCKING SLEEVE Description : LOCKING SLEEVE() Specification : DET NO-15 TO DRG.NO.ARDE-2121 C Estab
36) PIN Description : PIN() Specification : AS PER DRAWING C Estab
37) FUNNEL ASSY, IN F.C. Description : FUNNEL ASSY, IN F.C.() Specification : DRG NO- ARDE 1947 DET 57 C Estab
38) KIT ARMING & FUZING Description : KIT ARMING & FUZING() Specification : AS PER OFDC SPECIFICATION C Estab
39) ARMING FORK ASSEMBLY IN FC FOR BTU-250 Description : ARMING FORK ASSEMBLY IN FC FOR BTU-250() Specification : DRG.NO.9501-03 , DET NO.-15 C Estab
40) CLIP TRANSIT ASSY IN F C FOR TU TB 250 Description : CLIP TRANSIT ASSY IN F C FOR TU TB 250() Specification : DET.42 TO DRG NO.ARDE-9501-03 C Estab
41) STUD Description : STUD() Specification : ARDE / 9501-03 IN F.C C Estab
42) SPINDLE BEARING HOUSING Description : SPINDLE BEARING HOUSING() Specification : DRG.NO- ARDE 9501-03 DET NO-28 C Estab
43) KIT ARMING & FUZING COMPONENTS Description : KIT ARMING & FUZING COMPONENTS() Specification :AS PER DRAWING C Estab
44) AXLE FIN Description : AXLE FIN() Specification : AS PER DRAWING C Estab
45) SAFETY PIN Description : SAFETY PIN() Specification : AS PER DRAWING C Estab
46) WIND SHIELD Description : WIND SHIELD() Specification : DRG.Pt.NO.IQX-1010 C Estab
47) SAFETY CAP Description : SAFETY CAP() Specification : AS PER DRAWING C Estab
48) DISC Description : DISC() Specification : AS PER DRAWING C Estab
49) SEPTUM Description : SEPTUM() Specification : QX- 338 C Estab
50) DETENT Description : DETENT() Specification : DRG.NO.QX-1507 C Estab
Category : dp
Grade : 3
Size : S
3082 A.V.M. SALES CORPORATION
1-D,CANAL ROAD KOLKATA W.BENGAL
PIN1 : 700053
Phone No. : 07612743368 		700007A113

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) AMMONIUM NITRATE GR I ITEM CODE 1001020108 Description : AMMONIUM NITRATE GR I ITEM CODE 1001020108() Specification : SPECN: IND/ME/86 DC NO.3754-ME DT.12/12/2002 R Estab
2) ANTIMONY SULPHIDE ITEM CODE 1001022307 Description : ANTIMONY SULPHIDE ITEM CODE 1001022307() Specification : SPECN:- JSS-6810-71 2008(REVISION NO.3) R Estab
3) BORAX CRYSTAL PURE GRADE ITEM CODE 1001054123 Description : BORAX CRYSTAL PURE GRADE ITEM CODE 1001054123() Specification : SPECN.: IS-1109-1980 (2ND REV.) REAFFIRMED 1997 DC NO. 3777-ME DT. 25/09/03 R Estab
4) POTASSIUM CHLORIDE MIN ASSAY 99 POINT 5 PERCENT ITEM CODE 1001617608 Description : POTASSIUM CHLORIDE MIN ASSAY 99 POINT 5 PERCENT ITEM CODE 1001617608() Specification : POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 % R Estab
5) Potassium Boron Fluride ITEM CODE 1001619908 Description : Potassium Boron Fluride ITEM CODE 1001619908() Specification : POTASIUM BORON FLURIDE (KBF 4) LR GRADE MINIMUM ASSAY - 99.5 % (ON DRY BASIS)LOSS OF DENSITY AT 105 DEGREE CENTIGRADE - 0.40 % R Estab
6) SODIUM NITRATE GR I ITEM CODE 1001722110 Description : SODIUM NITRATE GR I ITEM CODE 1001722110() Specification : SODIUM NITRATE GR-1 IS-SIEVE SIZE 125 MICROMETER TO SPECN:- JSS-6810-87:2011 (REVISION NO.2) R Estab
Category : p
Grade : 3
Size : S
3083 PRAKASH PRAHALAD PAWAR
PLOT NO.25, NAGSEN COLONY, KANDARI, BHUSAWAL MAHARASHTRA
PIN1 : 425203
Phone No. : 9960819368 		ALTPP9284D

Download 		1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) FABRICATION OF BOX SM 651 J Description : FABRICATION OF BOX SM 651 J() Specification : FABRICATION OF BOX SM 651 -J R Estab
2) FABRICATION SERVICES BOX C43A Description : FABRICATION SERVICES BOX C43A() Specification : FABRICATION SERVICES BOX C-43A R Estab
3) FABRICATION SERVICES BOX C51A Description : FABRICATION SERVICES BOX C51A() Specification : FABRICATION SERVICES BOX C-51A R Estab
4) PHOSPHATING PAINTING BOX C51 Description : PHOSPHATING PAINTING BOX C51() Specification : PHOSPHATING &PAINTING BOX C-51 R Estab
5) PROCESSING FOR AMMNBOX SM51 Description : PROCESSING FOR AMMNBOX SM51() Specification : PROCESSING FOR AMMN.BOX SM-51 R Estab
6) PROCESSING FOR AMMNCONTC44A Description : PROCESSING FOR AMMNCONTC44A() Specification : PROCESSING FOR AMMN.CONT.C-44A R Estab
7) PROCESSING FOR BOX SM 642 D Description : PROCESSING FOR BOX SM 642 D() Specification : PROCESSING FOR BOX SM-642-D R Estab
8) PROCESSING OF CYLINDER 12A Description : PROCESSING OF CYLINDER 12A() Specification : PROCESSING OF CYLINDER 12A R Estab
9) PROCESSING OF AMMN CONT BOX 43 Description : PROCESSING OF AMMN CONT BOX 43() Specification : PROCESSING OF AMMN.CONT.BOXC43 R Estab
10) PROCESSING OF BOX 601 MODIFIED Description : PROCESSING OF BOX 601 MODIFIED() Specification : PROCESSING OF BOX 601 MODIFIED R Estab
11) PROCESSING OF CARRIER 13A Description : PROCESSING OF CARRIER 13A() Specification : PROCESSING OF CARRIER 13A R Estab
12) PROCESSING OF CARRIER 7A Description : PROCESSING OF CARRIER 7A() Specification : PROCESSING OF CARRIER 7A R Estab
13) PROCESSING OF CARRIER 6A Description : PROCESSING OF CARRIER 6A() Specification : PROCESSING OF CARRIER 6A R Estab
14) PROCESSING OF PHOS PAINTING 53 Description : PROCESSING OF PHOS PAINTING 53() Specification : PROCESSING OF PHOS.PAINTING 53 R Estab
15) RIVETING OF ASSLY CARRIER 13A Description : RIVETING OF ASSLY CARRIER 13A() Specification : RIVETING OF ASSLY. CARRIER 13A R Estab
16) RIVETING OF CARRIER 6A Description : RIVETING OF CARRIER 6A() Specification : RIVETING OF CARRIER 6A R Estab
17) SERVICES FOR AMMNBOXSM171L Description : SERVICES FOR AMMNBOXSM171L() Specification : SERVICES FOR AMMN.BOX-SM-171-L R Estab
18) SERVICES FOR AMMN CONT BOX 651 Description : SERVICES FOR AMMN CONT BOX 651() Specification : SERVICES FOR AMMN.CONT.BOX 651 R Estab
19) SERVICES FOR BOX H5A Description : SERVICES FOR BOX H5A() Specification : SERVICES FOR BOX H5A R Estab
20) SOLDERING PAINTING SERVICES Description : SOLDERING PAINTING SERVICES() Specification : SOLDERING & PAINTING SERVICES R Estab
Category : p
Grade : 3
Size : S
3084 METAL ALLOY S AND ENGINEERING CO.
1/8 KIKABHAI MANISON, 7TH KIKA STREET, GULAL WADI MUMBAI MAHARASHTRA
PIN1 : 400004
Phone No. : 02266363098
GSTIN : 27AICPD5626K1ZA 		MUMB12014C

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) Steel Round 65mm Dia to Specification IS 4431 Grade 14C14S14 in cold drawn condition Description : Steel Round 65mm Dia to Specification IS 4431 Grade 14C14S14 in cold drawn condition() Specification : Steel Round 65mm Dia to Specification IS:4431 Grade 14C14S14 in cold drawn condition alternate material :10C8S10 or 45C8-IS 2004:1991 R Estab
Category : ddp
Grade : 1
Size : S
3085 A-ONE ENTERPRISES PVT. LTD.
X-8, LOHA MANDI, NARAINA NEW DELHI DELHI
PIN1 : 110028
Phone No. : 07612743368 		110028A001

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TWIN CONTAINER 520:9 DRG TRD 422155 (9911357801) Description : TWIN CONTAINER 520:9 DRG TRD 422155 (9911357801)() Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155. C Estab
Category : p
Grade : 3
Size : S
3086 BHANU ENGG WORKS
17 B K MOITRA ROAD KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 07612743368 		700036B234

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SPRING 5209544 FOR HEAT-551. (9911357927) Description : SPRING 5209544 FOR HEAT-551. (9911357927)() Specification : SPRING TO DRG NO.301100269. C Estab
Category : p
Grade : 3
Size : S
3087 ANISHA ENTERPRISES
PLOT NO.7,CENTRAL EXCISE LAYOU T VYANKETESH NAGAR,PRATAPNAGAR NAGPUR MAHARASHTRA
PIN1 : 440022
Phone No. : 9665423659
GSTIN : 27AHKPC8367R1ZG 		AHKPC8367R

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2101099410 CLOTH COLLAR WHITE 1371.6 MM (54") Description : 2101099410 CLOTH COLLAR WHITE 1371.6 MM (54")() Specification : SPECN. JSS 8305-21: 2007 (REVISION NO. 2) R Estab
2) 2101110400 CLOTH ALL WOOL MELTON FINISH Description : 2101110400 CLOTH ALL WOOL MELTON FINISH() Specification : JSS 8305- 16: 2009 R Estab
3) 2101118365 CLOTH COVER FOR BOMB 120 MM Description : 2101118365 CLOTH COVER FOR BOMB 120 MM() Specification : IS: 179 - 1977 R Estab
4) 2556000116 STICKER LABEL FOR FUZE 117 MK-20 Description : 2556000116 STICKER LABEL FOR FUZE 117 MK-20() Specification : LABEL (STICKER) FOR FUZE 117 MK-20 C Estab
Category : ddp
Grade : 3
Size : S
3088 ASIA TEXTILES
88/239-A, SHAFIABAD, CHAMAN GANJ KANPUR UTTAR PRADESH
PIN1 : 208001
Phone No. : 07612743368 		208001A299

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TAPE COTTON WHITE PROOFED 13MM WIDE LF 2101774540 Description : TAPE COTTON WHITE PROOFED 13MM WIDE LF 2101774540() Specification : TAPE COTTON WHITE MEDIUM PROOFED 13.00 MM WIDE TO SPECN:- IND/ME/888 DC-5405-ME DT 01-02-2016. R Estab
2) TAPE COTTON WHITE PROOFED 19MM WIDE LF 2101774543 Description : TAPE COTTON WHITE PROOFED 19MM WIDE LF 2101774543() Specification : TAPE COTTON WHITE MEDIUM PROOFED 19.0 +_1.5 MM WIDE SPECN:-IND/ME/888: 2015 DC NO.5405-ME DT.01/02/2016. R Estab
Category : p
Grade : 3
Size : S
3089 ARCOTECH LTD
181,SECTOR-B INDUSTRIAL GROWTH CENTRE REWARI HARYANA
PIN1 : 123501
Phone No. : 07612743368 		0000TR3349

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) COPPER STRIP LF 0700464012 Description : COPPER STRIP LF 0700464012() Specification : COPPER STRIP 16+,-0.50 MM WIDE x 0.10+,-0.01 MM THICK IN COILS OF 9 METRES LONG SPECN: BS-2870-1980-C 104 CONDITION"H". R Estab
2) BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505) Description : BRASS STRIP 28X0.5MM BS2870 CZ102 (0710291505)() Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30 R Estab
3) BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345) Description : BRASS STRIP 22X1.02 MM (ITEM CODE: 0710664345)() Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90 R Estab
4) BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177) Description : BRASS STRIP 24X0.70MM JSS:9535-02 (0710665177)() Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN R Estab
5) BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195) Description : BRASS STRIP 22X.7MM BS2870CZ106 1/4 (ITEM CODE: 0710665195)() Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD R Estab
6) BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346) Description : BRASS STRIP 48X1.1MM BS2870 CZ108 (0710890346)() Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120 R Estab
7) BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132) Description : BRASS STRIP 132X0.4MM IS410 ZN30 O (0712590132)() Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM. R Estab
8) BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159) Description : BRASS STRIP 127X0.4MM IS410 ZN30 O (0712590159)() Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED) R Estab
Category : p
Grade : 3
Size : S
3090 ASHOK ENTERPRISES
9, INDUSTRIAL ESTATE ADHARTAL JABALPUR MADHYA PRADESH
PIN1 : 482004
Phone No. : 07612743368 		00000TR957

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ASSY AND PAINTING OF CRATE 12A AS ENCL LF 0000000731 Description : ASSY AND PAINTING OF CRATE 12A AS ENCL LF 0000000731() Specification : ASSY AND PAINTING OF CRATE 12A AS ENCL P Estab
2) MFG PAINTING OF 125 IMI PLWOOD BOX LF 0000000745 Description : MFG PAINTING OF 125 IMI PLWOOD BOX LF 0000000745() Specification : MANUFACTURING AND PAINTING OF 125 FSAPDS.IMI PLYWOOD BOX AS PER TERMS AND CONDITIONS ENCLOSED. R Estab
3) ASSY PAINTING OF CRATE 13 A LF 0000000940 Description : ASSY PAINTING OF CRATE 13 A LF 0000000940() Specification : ASSEMBLY AND PAINTING OF CRATE 13A (WOODEN) . THA DETAILED SCOPE OF WORK IS AS PER ANNEX.'A'. R Estab
4) CRATE 12A WOODEN ISV-483A (HEAT/TPT (6574370000) Description : CRATE 12A WOODEN ISV-483A (HEAT/TPT (6574370000)() Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM C Estab
Category : p
Grade : 3
Size : S
3091 CATALYST CORPORATION
B-13/348, GHORPADE PETH PUNE MAHARASHTRA
PIN1 : 411042
Phone No. : 02026835008 		AQAPS8207K

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977 Description : 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977() Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991 R Estab
Category : p
Grade : 3
Size : S
3092 CUBEX TUBINGS LIMITED
"1-7-27 TO 34,1st FLOOR, UNITEDBLDG COMPLEX,SAROJINIDEVI ROAD SECUNDERABAD TELANGANA
PIN1 : 500003
Phone No. : 07612743368 		500003C125

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CUPRO NI TUBE 46.8X40.3 MM BMK-07G-55 (0744358500) Description : CUPRO NI TUBE 46.8X40.3 MM BMK-07G-55 (0744358500)() Specification : CUPRO NICKEL TUBING WITH HARDNESS 55 TO 65 Hb IN STRAIGHT LENGTH OF 2 TO 3 MTRS.PACKED PROPERLY TO ENSURE STRAIGHTNESSSIZE 46.8+/-0.20 MM O/D x 40.3+/-0.10 MM I/D (PERMISSIBLEVARIATION IN WALL THICKNESS 0.3MM Max) TO BOFORS SPECN:BMK-07-G R Estab
Category : p
Grade : 3
Size : S
3093 ELECTRO CHEMICALS
7-2A, CAREER LANE KOLKATA WEST BENGAL
PIN1 : 700014
Phone No. : 07612743368 		700014E056

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ANODE CADMIUM LF 1582400000 Description : ANODE CADMIUM LF 1582400000() Specification : ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE INDIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016). R Estab
Category : p
Grade : 3
Size : S
3094 WESTERN EXTRUSION INDUSTRIES
219, GULALWADI, MUMBAI. KIKA STREET MUMBAI MAHARASHTRA
PIN1 : 400002
Phone No. : 9892640444 		PNEW01174F

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) brass rods Description : brass rods() Specification : All major specs C Estab
Category : ddp
Grade : 1
Size : S
3095 HINDUSTAN ZINC LIMITED.,
SOLITAIRE CORPORATE PARK, BUSINESS SQUARE, C-WING, IIND FLOOR, CHAKALA, ANDHERI EAST, MUMBAI MAHARASHTRA
PIN1 : 400093
Phone No. : 022-66434500, 		AAACH7354K

Download 		1) Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) ZINC INGOTS 99.95% Description : ZINC INGOTS 99.95%() Specification : AS PER GIVEN SPECN. R Estab
Category : dp
Grade : 1
Size : L
3096 KAIMFIN INDUSTRIES
PLOT NO.891,SECTOR-15A FARIDABAD HARYANA
PIN1 : 121007
Phone No. : 07612743368 		0000TR1625

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) FLUX RUSTODINE 125(1032137040) Description : FLUX RUSTODINE 125(1032137040)() Specification : FLUX RUSTODINE 125 R Estab
Category : p
Grade : 3
Size : S
3097 KAVITA INDUSTRIES
JAY MALHAR SHED, GALA No.1, EASTERN EXPRESS HIGHWAY CHEMBUR MUMBAI MAHARASHTRA
PIN1 : 400071
Phone No. : 07612743368 		0000TR5053

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) HEXA CHLORO ETHANE (1001290307) Description : HEXA CHLORO ETHANE (1001290307)() Specification : SPECN: JSS-6810-99-2011 (REVISION NO. 2) R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) HEXA CHLORO ETHANE (1001290307) Description : HEXA CHLORO ETHANE (1001290307)() Specification : SPECN: JSS-6810-99-2011 (REVISION NO. 2) R Estab
Category : p
Grade : 3
Size : S
3098 SAARC TOOL TECH (P) LTD
PLOT NO. 85/86/87, SIDCO IND. ESTATE, COIMBATORE TAMILNADU
PIN1 : 641050
Phone No. : 07612743368 		641050S001

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232 Description : PLASTIC PACKAGE FOR PRE FRAG 100 120 KG BOMB LF 9911358232() Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014. C Estab
2) PACKAGE TO DRG NO 08040002000000000 LF 9911358292 Description : PACKAGE TO DRG NO 08040002000000000 LF 9911358292() Specification : PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015. R Estab
Category : p
Grade : 3
Size : S
3099 Shri Konark Precision Tools (P) Ltd.
Madhavi Nagar Ferozguda Hyderabad Hyderabad AP
PIN1 : 500011
Phone No. : 9666404191 		HYDSO3296G

Download 		1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies. Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.() Specification : Drg. No.ITW-63 C Estab
Category : p
Grade : 3
Size : S
3100 PRS PERMACEL PVT.LTD.HOECHST
PLOT NO. PL-11/1, MIDC AMBERNATH INDUSTRIAL AREA AMBERNATH THANE MAHARASHTRA
PIN1 : 421506
Phone No. : 07612743368 		00000TR516

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE W/P FABRIC 50MM WIDE (2101773048) Description : TAPE ADHESIVE W/P FABRIC 50MM WIDE (2101773048)() Specification : TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14. R Estab
Category : p
Grade : 3
Size : S