List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2441 Bharat Electronics Limited
Bharat Electronics Limited, Outer Ring Road Nagavara Bengaluru Karnataka
PIN1 : 560045
Phone No. : 25039300
GSTIN : 27AAACB5985C1ZP 		PNEB00208F

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6473200568 155 MM ELECTRONIC PD FUZE FILLED[64]() Specification : 155 MM ELECTRONIC PD FUZE FILLED ( FUZE PD ELECTRONIC COMPATIBLE TO FIRE WITH 155 MM AMMUNITION WITH POINT DETONATION SUPER QUICK AND POINT DETONATION DELAY AS PER OFCH/155/01) C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RED DOT SIGHT TO DRG NO 30P 4100[70]() Specification : 30P 4100 C Nonestab
Category : p
Grade : Grade II
Size : L
2442 ARMAAX AUTO PVT LTD
334, Admapur,Post. Mudal, Taluka – Bhudargad, Kolhapur Maharashtra
PIN1 : 416001
Phone No. : 244080
GSTIN : 27AAACR8776P2ZE 		AACPK5576H

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX STEEL NO. S 6 MK1 TO DRG. NO. ARDE 2225 SHEET NO.3[65]() Specification : DRG. NO. ARDE 2225 SHEET NO.3 C Nonestab
2) BOX NO 682 MK 1 WITHOUT LINER,DESIGNER'S REFERANCE IA 896/1 SHEET-1,PART NO. ISV 67 A, SPECN IA 1163[65]() Specification : IA 1163 C Nonestab
3) BOX NO.428 MK.1 DRG.NO. D.D.(L) 18704, SPECIFICATION - IA 1163 ,TO BE PAINTED AS PER DRG. WITH PAINT RED SIGNAL (ISC 537 TO IS:5) WITH A.NO.1[65]() Specification : DRG. NO. D.D.(L) 18704 C Nonestab
4) BOX NO 582 MK1/L TIN PLATE TO DESGN. REF NO. D7(L) 822/G/169, SPECN.NO. IA-1163[65]() Specification : IA-1163 C Nonestab
5) BOX C 28A STEEL DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS-5:2007 (SIXTH REVISION ) DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A[65]() Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A C Nonestab
6) AMMUNITION CONTAINER BOX M 104 MK1 STEEL,DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS:5-1994.WITH AMENDMENT NO.1,DESIGNER'S REFERENCE DD(L)11325,,SPECN IA 1169[65]() Specification : IA 1169 C Nonestab
7) BOX B 184,MK1/L STEEL W/O SEPARATOR PKG CARRIER (PART NO.ISV293 OR ISV 294) DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS:5-1994(WITH AMENDMENT NO.1) DESIGNER'S REF NO. IA 646 (2 SHEET) PART NO. ISV 91A,SHEET NO.2 SPECN IA 1169[65]() Specification : IA 1169 C Nonestab
8) BOX G-70 MK1 (STEEL), AS PER DRG.NO. DD(L) 12919, PART NO. SV 68A, MATERIAL, RUST PROOFING AND PAINTING AS PER DETAILS IN DRAWING WITH PAINT OF OLIVE GREEN SHADE, ISC 220 OF IS:5-1994 WITH AMENDMENT NO. 1, SPECN. NO. IA 1169.[65]() Specification : IA 1169 C Nonestab
9) AMMUNITION CONTAINER (BOX) H 2 A/L,STEEL,DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN,ISC:220 OF IS:5-1994 (AMENDMENT NO.1), DESIGNER'S REFERENCE NO.CIA/AMMN/468,PART NO. ISV 296-A, SPECN. IA 1169[65]() Specification : IA 1169 C Nonestab
Category : p
Grade : Grade III
Size : S
2443 STS MANUFACTURING PVT LTD
NO - 10 / A ,POONAPALLI VILLAGE , HOSUR TO ANEKAL ROAD HOSUR Tamil Nadu
PIN1 : 635114
Phone No. : 262185
GSTIN : 33AAKCS0410P1ZC 		AAKCSO410P

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SUB ASSY OF AIR RESERVOIR BKT[90]() Specification : S/A OF AIR RESERVOIR BKT., PART NO.B-3910101(HA) C Estab
2) SA OF PIPE EXHAUST[90]() Specification : S/A OF PIPE EXHAUST DRG./PART NO. B-4557104-A C Estab
3) TAIL PIPE[90]() Specification : TAIL PIPE FN100415HASE.0 C Estab
4) S A OF FLEXIBLE EXHAUST PIPE[90]() Specification : S/A OF FLEXIBLE EXHAUST PIPE P.NO. B 4573702 HASE.1 C Estab
5) CAB MOUNTING BRACKET LH[90]() Specification : CAB MOUNTING BRACKET LH DRG./PART NO. X-0444510[E] C Estab
6) CAB MOUNTING BRACKET RH[90]() Specification : CAB MOUNTING BRACKET RH DRG./PT.NO. X-0444410[E] C Estab
7) BUMPER CROSS MEMBER[90]() Specification : BUMPER CROSS MEMBER PT.NO.B8136507(B.0) C Estab
8) REAR TOW HOOK CROSS MEMBER[90]() Specification : REAR TOW HOOK CROSS MEMBER PT.NO.B8136508-B.0 C Estab
9) SHOCK ABS MTG BKT RH[90]() Specification : SHOCK ABS MTG BKT-RH PT.NO.F8966214 HASE.0 C Nonestab
10) SHOCK ABS MTG BKT LH[90]() Specification : SHOCK ABS MTG BKT -LH PT.NO.F8425114HASE.2 C Estab
11) S A OF CSO BRACKET[90]() Specification : S/A OF CSO BRACKET B1742801(HASE.3) C Estab
12) S A OF AGB LINK TUBE[90]() Specification : S/A OF AGB LINK TUBE P.NO. B 0303101 HASE .0. C Estab
13) BKT CAB MTG REAR LH[90]() Specification : BKT.CAB MTG REAR LH PT.NO.B0122906-B C Estab
14) BKT CAB MTG REAR RH[90]() Specification : BKT.CAB MTG REAR RH PT.NO.B0122907-B C Estab
15) DAT COVER ASSEMBLY[90]() Specification : DAT COVER ASSEMBLY(Ref-F-1103310-V1 C Estab
16) BODY MTG 4TH RH LH[90]() Specification : BODY MTG 4TH RH/LH DRG./PART NO.X-7135410 HASE C Estab
17) REAR SHOCK ABSR BKT RH[90]() Specification : REAR SHOCK ABSR BKT-RH PT NO. X-7198910(C.1) C Estab
18) REAR SHOCK ABSR BKT LH[90]() Specification : REAR SHOCK ABSR BKT-LH PT NO.X7198810(C.1) C Estab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SUB ASSY OF AIR RESERVOIR BKT[90]() Specification : S/A OF AIR RESERVOIR BKT., PART NO.B-3910101(HA) C Estab
2) SA OF PIPE EXHAUST[90]() Specification : S/A OF PIPE EXHAUST DRG./PART NO. B-4557104-A C Estab
3) TAIL PIPE[90]() Specification : TAIL PIPE FN100415HASE.0 C Estab
4) S A OF FLEXIBLE EXHAUST PIPE[90]() Specification : S/A OF FLEXIBLE EXHAUST PIPE P.NO. B 4573702 HASE.1 C Estab
5) CAB MOUNTING BRACKET LH[90]() Specification : CAB MOUNTING BRACKET LH DRG./PART NO. X-0444510[E] C Estab
6) CAB MOUNTING BRACKET RH[90]() Specification : CAB MOUNTING BRACKET RH DRG./PT.NO. X-0444410[E] C Estab
7) BUMPER CROSS MEMBER[90]() Specification : BUMPER CROSS MEMBER PT.NO.B8136507(B.0) C Estab
8) REAR TOW HOOK CROSS MEMBER[90]() Specification : REAR TOW HOOK CROSS MEMBER PT.NO.B8136508-B.0 C Estab
9) SHOCK ABS MTG BKT RH[90]() Specification : SHOCK ABS MTG BKT-RH PT.NO.F8966214 HASE.0 C Estab
10) SHOCK ABS MTG BKT LH[90]() Specification : SHOCK ABS MTG BKT -LH PT.NO.F8425114HASE.2 C Estab
11) S A OF CSO BRACKET[90]() Specification : S/A OF CSO BRACKET B1742801(HASE.3) C Estab
12) S A OF AGB LINK TUBE[90]() Specification : S/A OF AGB LINK TUBE P.NO. B 0303101 HASE .0. C Estab
13) BKT CAB MTG REAR LH[90]() Specification : BKT.CAB MTG REAR LH PT.NO.B0122906-B C Estab
14) BKT CAB MTG REAR RH[90]() Specification : BKT.CAB MTG REAR RH PT.NO.B0122907-B C Estab
15) DAT COVER ASSEMBLY[90]() Specification : DAT COVER ASSEMBLY(Ref-F-1103310-V1 C Estab
16) BODY MTG 4TH RH LH[90]() Specification : BODY MTG 4TH RH/LH DRG./PART NO.X-7135410 HASE C Estab
17) REAR SHOCK ABSR BKT RH[90]() Specification : REAR SHOCK ABSR BKT-RH PT NO. X-7198910(C.1) C Estab
18) REAR SHOCK ABSR BKT LH[90]() Specification : REAR SHOCK ABSR BKT-LH PT NO.X7198810(C.1) C Estab
19) LPTA ASSY BUMPER FRONT[90]() Specification : ASSY BUMPER FRONT C Nonestab
20) LPTA Assy Mounting Spare Wheel Carrier[90]() Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED) C Nonestab
21) LPTA Reinforcement Plate[90]() Specification : REINFORCEMENT PLATE (2 PER SET) C Nonestab
22) END BKT LH BRKT FOR CROSS MEMBER[90]() Specification : END BKT LH BRKT FOR CROSS MEMBER, PT. NO.X 0476210-HASE C Nonestab
23) LPTA Assy 5th Cross Members BS III 715[90]() Specification : 5TH CROSS MEMBER BS-III 715 LPTA VEHICLE, PART NO. 263631208201-A1-a-V2 C Nonestab
24) LPTA Assy Cross Members without AF Mtg Bkt 1st X Member[90]() Specification : ASSY. CROSS MEMBER (WITHOUT AIR FILTER MTG. BKT.) DRG. NO. 215431200116-V1. CONSISTING OF DRG. NO. (I) 215431207117 Bv1 ) 261431207132 b(V1) (III) 3423100006-b V1 C Nonestab
25) LPTA Key Ring with Plate[90]() Specification : KEY RING WITH PLATE FOR LPTA C Nonestab
Category : p
Grade : Grade II
Size : S
2444 UNIVERSAL ENGINEERING AND MANUFACTURING INDUSTRY
SHED-8, F-II BLOCK , PIMPRI MIDC, PUNE-411018 F-II BLOCK , PIMPRI MIDC, PUNE Maharashtra
PIN1 : 411018
Phone No. : 46765151
GSTIN : 27ABGPB8967Q1ZT 		ABGPB8967Q

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) FLAT DRILL AS PER MSF DRG REGD NO. 17254 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/520 .[42]() Specification : FLAT DRILL AS PER MSF DRG REGD NO. 17254 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/520 . C Estab
2) STEPPED DRILL AS PER MSF DRG REG NO-17253 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/516[42]() Specification : STEPPED DRILL AS PER MSF DRG REG NO-17253 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/516 S Estab
3) FLAT FORM TOOL AS PER MSF DRG REG NO - 17256 FOR MULTI-SPINDLE AUTOMATIC M/C TO DRG NO:NCC/515.(REF.:OFAJ DRG.NO.: CCT-007/227.).[42]() Specification : FLAT FORM TOOL AS PER MSF DRG REG NO - 17256 FOR MULTI-SPINDLE AUTOMATIC M/C TO DRG NO:NCC/515.(REF.:OFAJ DRG.NO.: CCT-007/227.). R Estab
4) PUNCH FOR FINAL DRAWN TOOL AS PER DRG NO:T-5450,SHEET NO. 7/7[42]() Specification : PUNCH FOR FINAL DRAWN TOOL AS PER DRG NO:T-5450,SHEET NO. 7/7 S Estab
Category : ddp
Grade : Grade II
Size : S
2445 Die Hard Polymer Products
13/2, K.B. Sarani Kolkata West Bengal
PIN1 : 700080
Phone No. : 033-25294024 		CALA11245D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) GAITTER RUBBER Description : GAITTER RUBBER() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
2) Rubber Bush Description : Rubber Bush() Specification : As per specification / Pt. no. F-0530150-H C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) S/A Bump stop-F2632200V1 Description : S/A Bump stop-F2632200V1() Specification : S/A Bump stop, Drg./Pt. No. F-2632200 V1 C Estab
2) Sleeve-X1201250 Description : Sleeve-X1201250() Specification : Sleeve Drg./Pt. No.- X-1201250 HASE for Stallion veh. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911833148 RUBBER GASKET A OFB SK 712 Description : 9911833148 RUBBER GASKET A OFB SK 712() Specification : AS PER OFBH SPECIFICATION R Estab
2) 9911846297 RUBBER GASKET FOR RIFLE BOX Description : 9911846297 RUBBER GASKET FOR RIFLE BOX() Specification : AS PER OFBH SPECIFICATION R Estab
3) 9911844692 PACKING 022 PONGY RUBBER Description : 9911844692 PACKING 022 PONGY RUBBER() Specification : AS PER OFBH SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
2446 Calcutta Electrodes Pvt. Ltd.
Sardar Patel Timber Market, Rig Road o. 2, Bhanpuri Raipur Chhattisgarh
PIN1 : 493221
Phone No. : 09329129686 		CALC02457A

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) M S WELDING ELECTRODE Description : M S WELDING ELECTRODE() Specification : M.S.WELDING ELECTRODE MEDIUM COATED TO SIZE 3.15MM X 350 MM LONG CONFORMING TO IS SPECN 814-1991 AND CODING ER-4211 P Estab
Category : p
Grade : 3
Size : S
2447 Shiva Engineering Works
2, India Exchange Place Kolkata West Bengal
PIN1 : 700001
Phone No. : 033-22301315 		CALS05930B

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) CATCH OBLIQUE HOOK STEEL IS 4365 79 Description : CATCH OBLIQUE HOOK STEEL IS 4365 79() Specification : CATCH/HOOK STEEL IS:4365-79 C Estab
2) HOOK PART NO 675 57271 A Description : HOOK PART NO 675 57271 A() Specification : HOOK PART NO 675-57-271/A C Estab
3) Shaft 42 CR 4 MO 2 oblique TO Description : Shaft 42 CR 4 MO 2 oblique TO() Specification : Shaft 42 CR 4 MO 2/TO Drg No. 765-58-222/A C Estab
Category : p
Grade : 3
Size : S
2448 HARIOM INDUSTRIES
GAT NO 1210,NEAR GODREJ INTERIO,VILLAGE SHIRWAL SHINDEWADI PALSHI ROAD TALUKA-KHANDALA, DIST -SATARA Maharashtra
PIN1 : 412801
Phone No. : 9960647419
GSTIN : 27AAPFH2006L1Z9 		AAPFH2006L

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]() Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117[65]() Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451300 DETONATOR HOLDER FOR CHARGE 145 MM[63]() Specification : DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM. C Nonestab
2) 6332201000 CASING ASSLY FOR MODULAR CHARGE 220[63]() Specification : CASING ASSLY FOR MODULAR CHARGE 220 GM CONSISTING OF 03 COMPONENTS TO DRG.NO. HE/CAST 037 DET 1 TO 3, 3 COMPONENT TO DRG NO.HE/CAST 035 DET 4 TO 6, & QAP NO. HEMRL/HE/ADD/08/01REV. 00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6572129006 CONTAINER 38 B WITHOUT FITMENTS[65]() Specification : CQA(A) 2804(M) C Nonestab
2) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL[61]() Specification : CQA (A) 1837 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]() Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330301100 DETONATOR HOLDER FOR SHAPED CHARGE 30MM[63]() Specification : DETONATOR HOLDER TO DRG. NO. HE/CAST 012 DET 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008. C Nonestab
2) 6330301000 SHAPED CHARGE 30 MM EMPTY ASSY[63]() Specification : SHAPED CHARGE 30 MM (E. ASSY) CONSISTING OF 3 ITEMS TO DRG.NO. HE/CAST 012 DET 1 TO 3 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330901100 DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 5 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]() Specification : DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008. C Nonestab
2) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]() Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008 C Nonestab
Category :
Grade : Grade III
Size : S
2449 ARK Rubber Products
43 A (NP), Developed Plots, Ekkattuthangal Chennai Tamil Nadu
PIN1 : 600032
Phone No. : 044-22251506 		CHEA12799D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Packing 645 01 7317 1 Description : Packing 645 01 7317 1() Specification : Packing Drg. No. 645-01-7317-1 C Estab
2) Packing Drg No 645 01 7339 1 Description : Packing Drg No 645 01 7339 1() Specification : Packing 645-01-7339-1 Specification Plate 20, Type 005216-75 C Estab
Category : p
Grade : 3
Size : S
2450 Dewas Hydroquip Pvt. Ltd.
65, Industrial Area No. 3 Dewas Madhya Pradesh
PIN1 : 455001
Phone No. : 09425047512 		BPLD01273G

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Hose Part No X3915000-VI Description : Hose Part No X3915000-VI() Specification : HOSE Part No X3915000 C Estab
2) Hose Part No X3954500-VI Description : Hose Part No X3954500-VI() Specification : HOSE Part No X3954500-V1 C Estab
3) HOSE FOR POWER STEERING Description : HOSE FOR POWER STEERING() Specification : HOSE FOR POWER STEERING PT. NO. X 7445200 V1 C Estab
4) TEE PIECE M18 X M18 X M22 Description : TEE PIECE M18 X M18 X M22() Specification : TEE PIECE M18 X M18 X M22 PART NO. F 1332111-A C Estab
Category : p
Grade : 3
Size : S
2451 Modi Arc Electrodes Co.
Oil Mill Gate, G.T. Road Modinagar Uttar Pradesh
PIN1 : 201204
Phone No. : 01232-661800 		MRTM01572E

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) M S WELDING ELECTRODE Description : M S WELDING ELECTRODE() Specification : M.S.WELDING ELECTRODE MEDIUM COATED TO SIZE 3.15MM X 350 MM LONG CONFORMING TO IS SPECN 814-1991 AND CODING ER-4211 P Estab
Category : p
Grade : 1
Size : L
2452 Dwekam Electrodes Pvt. Limited
Vill Talawali Chanda, A.B. Road, P.O.-Manglia Indore Madhya Pradesh
PIN1 : 453771
Phone No. : 0731-4229500 		BLPD03367A

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) M S WELDING ELECTRODE Description : M S WELDING ELECTRODE() Specification : M.S.WELDING ELECTRODE MEDIUM COATED TO SIZE 3.15MM X 350 MM LONG CONFORMING TO IS SPECN 814-1991 AND CODING ER-4211 P Estab
Category : p
Grade : 2
Size : M
2453 ORDNANCE FACTORY KHAMARIA
OFK ESTATE JABALPUR MP
PIN1 : 482005
Phone No. : 07612743368 		OFK1234567

Download 		1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) 84MM SHELL BODY Description : 84MM SHELL BODY() Specification : AS PER SPECIFICATION DRG.NO.-TRD-839 C Estab
2) AERIAL BOMB 100-120 KG RDZ (EMPTY) (9911358231) Description : AERIAL BOMB 100-120 KG RDZ (EMPTY) (9911358231)() Specification : AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168- E Estab
Category : ddp
Grade : 1
Size : L
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) 84MM SHELL BODY Description : 84MM SHELL BODY() Specification : AS PER SPECIFICATION DRG.NO.-TRD-839 C Estab
2) BODY ASSY FOR 81MM SMK Description : BODY ASSY FOR 81MM SMK() Specification : BODY ASSY TO DRG.NO. 4-26941-060cb DC 34269-A DTD. 17/11/87 C Estab
Category : p
Grade : 3
Size : S
2454 The Sumaan Industries
Gat No.430, Gawate Wasti, Alandi Phata, Medankarwadi, Chakan, Tal.Khed, Dist.Pune-410501.Maharashtra (IND) Alandi road Chakan Maharashtra
PIN1 : 410501
Phone No. : 8308287580
GSTIN : 27AXXPM3812C1ZB 		AXXPM3812C

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]() Specification : DRG.NO 2440AI3012 DC-37535A DATED 22.10.19 C Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]() Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER C Nonestab
3) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]() Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03. C Nonestab
4) BOTTOM RING FOR SUSTAINER IGN 5B 43[99]() Specification : BOTTOM RING TO DRG.NO.NASK 869 / 1, (PROV) TOP RING TO DRG. NO. NASK 869 / 2 (PROV) FOR 5B 43. C Nonestab
5) METALLIC PLUG FUZE HOLE[62]() Specification : METALLIC PLUG FUZE HOLE 2 IN NO.17 MK1 (M-1) FOR 105 MM SMOKE AS PER ASSY DRG NO. ISX 58 GE & ISX 59 GE PART NO. ISX 342. R Nonestab
6) DUMMY STAR[62]() Specification : DUMMY STAR FOR 51MM ILLG TO DRG. NO.OFDR/BOMB 51MM ILLG/116. R Nonestab
7) SET OF 5 COMPONENTS FOR IGNITER PINAKA[61]() Specification : SET OF 5 COMPONENTS FOR IGNITER PINAKA MK-II GUIDED DRG. NO. HEMRL/IGN/PIN MK-II/24 (1) CANISTER DET NO.3 (2) SQUIB HOLDER DET NO.4 (3) IGNITER CLOSURE DET.NO.11 (4) 'O' RING DET NO.13 (5) RETAINER DISC DET NO.14 R Nonestab
8) OUTER CONTAINER[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275/1 DET.NO.2 Qty 22000 Nos P Nonestab
9) CENTRAL TUBE WITH DISC[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.4 C Nonestab
10) SEALING RING FOR 81MM AT AL[62]() Specification : SEALING RING TO DRG.NO.HEMRL/PYRO/SK.0275 DET NO.22 C Nonestab
11) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
12) GASKET I FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.20 C Nonestab
13) DELAY ELEMENT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12 C Nonestab
14) SECURING NUT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.13 C Nonestab
15) GASKET II FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.21 C Nonestab
16) PROPELLANT CUP FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A C Nonestab
17) PROPELLANT CUP CLOSURE FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.18 C Nonestab
18) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
19) PLUG FOR 81MM AT AL[62]() Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994 C Nonestab
20) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
21) SHELL003 FOR 81MM SMOKE 3D6[62]() Specification : S PER DRAWING NO.4-26941 DET 040CB C Nonestab
22) RING FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET C Nonestab
23) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 008 C Nonestab
24) DELAY ELEMENT FOR 81MM SMOKE 3D6[62]() Specification : NO. CIA/AMN/2498,PART NO. IQX868 C Nonestab
25) PERFORATED DISC FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.3755(B) C Nonestab
26) PROPELLENT CUP FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 013 C Nonestab
27) SECURING NUT FOR 81MM 3D6[62]() Specification : NO. 4-26941 015 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Body Cast Iron Empty for FTW[64]() Specification : CIA 3807(d) Drg. No. DD(L) 13461/A/1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) METALLIC PLUG FUZE HOLE[62]() Specification : METALLIC PLUG FUZE HOLE 2 IN NO.17 MK1 (M-1) FOR 105 MM SMOKE AS PER ASSY DRG NO. ISX 58 GE & ISX 59 GE PART NO. ISX 342. R Nonestab
2) PLUG FOR 81MM AT AL[62]() Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994 C Nonestab
3) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
4) SHELL003 FOR 81MM SMOKE 3D6[62]() Specification : S PER DRAWING NO.4-26941 DET 040CB C Nonestab
5) RING FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET C Nonestab
6) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 008 C Nonestab
7) PERFORATED DISC FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.3755(B) C Nonestab
8) SECURING NUT FOR 81MM 3D6[62]() Specification : NO. 4-26941 015 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG TRG FOR 81MM MOR BOMB3B EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
3) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]() Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A" C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE MINE COMB M605 ASSEMBLY EMPTY[63]() Specification : CQA(A) 1803 C Nonestab
2) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG NO KF SK 1746 SHEET NO 2 SPECN DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE MINE COMB M605 ASSEMBLY EMPTY[63]() Specification : CQA(A) 1803 C Nonestab
2) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG NO KF SK 1746 SHEET NO 2 SPECN DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : S
2455 Vaid Elastomer Processors Pvt. Ltd.
R/856, TTC Ind. Area, Thane-Belapur Road, Near Golden Garage Navi Mumbai Maharashtra
PIN1 : 400701
Phone No. : 022-27607426 		MUMV10079G

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT Description : LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT() Specification : 3 by 8 HOSE CON ON SWC TO DAT C Estab
2) LF 9013101238000 3 by 8 HOSE RADIATOR Description : LF 9013101238000 3 by 8 HOSE RADIATOR() Specification : 3 by 8 HOSE RADIATOR C Estab
3) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
4) Rubber bush-F0530150H Description : Rubber bush-F0530150H() Specification : As per specification / Drawings C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT Description : LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT() Specification : 3 by 8 HOSE CON ON SWC TO DAT C Estab
2) LF 9013101238000 3 by 8 HOSE RADIATOR Description : LF 9013101238000 3 by 8 HOSE RADIATOR() Specification : 3 by 8 HOSE RADIATOR C Estab
3) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
4) Rubber bush-F0530150H Description : Rubber bush-F0530150H() Specification : As per specification / Drawings C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT Description : LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT() Specification : 3 by 8 HOSE CON ON SWC TO DAT C Estab
2) LF 9013101238000 3 by 8 HOSE RADIATOR Description : LF 9013101238000 3 by 8 HOSE RADIATOR() Specification : 3 by 8 HOSE RADIATOR C Estab
3) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
4) Rubber bush-F0530150H Description : Rubber bush-F0530150H() Specification : As per specification / Drawings C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT Description : LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT() Specification : 3 by 8 HOSE CON ON SWC TO DAT C Estab
2) LF 9013101238000 3 by 8 HOSE RADIATOR Description : LF 9013101238000 3 by 8 HOSE RADIATOR() Specification : 3 by 8 HOSE RADIATOR C Estab
3) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
4) Rubber bush-F0530150H Description : Rubber bush-F0530150H() Specification : As per specification / Drawings C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT Description : LF 9013101237000 3 by 8 HOSE CON ON SWC TO DAT() Specification : 3 by 8 HOSE CON ON SWC TO DAT C Estab
2) LF 9013101238000 3 by 8 HOSE RADIATOR Description : LF 9013101238000 3 by 8 HOSE RADIATOR() Specification : 3 by 8 HOSE RADIATOR C Estab
3) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
4) Rubber bush-F0530150H Description : Rubber bush-F0530150H() Specification : As per specification / Drawings C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Cac Inlet Hose Engine Side Description : Cac Inlet Hose Engine Side() Specification : Cac Inlet Hose Engine Side, Drg./Pt. no.- F8P01054 HASE.1 C Estab
2) Hose charge air cooler-X1917750-A Description : Hose charge air cooler-X1917750-A() Specification : Hose charge air cooler, Drg./Pt. no.-X1917750-A C Estab
3) Rubber pad-F2600650 Description : Rubber pad-F2600650() Specification : Rubber pad, Drg./Pt. no.- F2600650 C Estab
Category : p
Grade : 3
Size : S
2456 United Rubber Industries
Jay Vailankani Industrial Estate Behind Gas Godown, Mira Bhayandar Road, Bhayandar (East), Thane Maharashtra
PIN1 : 401105
Phone No. : 02228145134 		AAAC46911F

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LF 9013199332000 3 by 8 HOSE CONNECTION ON SWC Description : LF 9013199332000 3 by 8 HOSE CONNECTION ON SWC() Specification : 3 by 8 HOSE CONNECTION ON SWC C Estab
2) Packing Drg No 645 01 7339 1 Description : Packing Drg No 645 01 7339 1() Specification : Packing 645-01-7339-1 Specification Plate 20, Type 005216-75 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) GASKET 765 46 247 Description : GASKET 765 46 247() Specification : GASKET 765 46 247 C Estab
2) HOSE 765 05 CD311 Description : HOSE 765 05 CD311() Specification : HOSE 765 05 CD311 C Estab
Category : p
Grade : 2
Size : S
2457 Vardhman Special Steels Limited
C 58, Focal Point Ludhiana Punjab
PIN1 : 141010
Phone No. : 08376803907 		JLDV01914D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 45 MM DIA EN9/BS 970() Specification : STEEL ROD 45 MM DIA SPECIFICATION EN-9 BS:970. R Estab
Category : p
Grade : 1
Size : L
2458 ASHOK CAST AND FORGE
UDYOG NAGAR JALANDHAR JALANDHAR Punjab
PIN1 : 144004
Phone No. : 0251422
GSTIN : 03EIKPK4297K1ZS 		EIKPK4297K

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) FORGED BODY FRONT PART TO OFAJ DRG NO F 9G OR GSF DRG NO M 10176B FOR BOMB 81 mm MORTAR C EMPTY BODY[62]() Specification : FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G OR GSF DRG. NO. M-10176 B FOR BOMB 81 mm MORTAR C (EMPTY BODY) R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FORGED BODY REAR PART TO OFAJ DRG NO F 10D OR GSF DRG NO M 10177 A FOR BOMB 81 mm MORTAR C EMPTY BODY[62]() Specification : FORGED BODY (REAR PART) TO OFAJ DRG. NO. F-10D OR GSF DRG. NO. M-10177 A FOR BOMB 81 mm MORTAR C (EMPTY BODY) R Nonestab
Category :
Grade : Grade III
Size : S
2459 Stumpp Schuele & Somappa Springs Pvt. Ltd.
139/2, Hosur Road, Koramangala Bangalore Karnataka
PIN1 : 560095
Phone No. : 080-25532335
GSTIN : 29AALCS7347E1ZX 		BLRS28339D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SPRING GRADE 3 TO IS 4454 81 Description : SPRING GRADE 3 TO IS 4454 81() Specification : SPRING GRADE 3 TO IS:4454-81 (PART -II) DRG NO. 700-38-954/A C Estab
2) Spring Gost Std Description : Spring Gost Std() Specification : Spring Gost Std Drg. No. 700-38-318/A C Estab
3) SPRING STD DRG NO 700 38 919 A Description : SPRING STD DRG NO 700 38 919 A() Specification : SPRING STD DRG. NO. 700-38-919/A C Estab
4) TORSION BAR LH Description : TORSION BAR LH() Specification : TORSION BAR LH, Pt. No.-F3643510-E C Estab
5) TORSION BAR RH Description : TORSION BAR RH() Specification : TORSION BAR RH, Pt. No.-F3643410-D/ DRG. No.- F-7870140-D C Estab
6) SPRING LOAD BODY FRT Description : SPRING LOAD BODY FRT() Specification : SPRING LOAD BODY FRT., Drg. no. X3604710-A.0 C Estab
Category : p
Grade : 2
Size : M
2460 SVR ENGINEERING WORKS
PLOT NO:B9/1, IDA, PATANCHERU, MEDAK(Dist) PATANCHERU PATANCHERU Telangana
PIN1 : 502319
Phone No. : 241551
GSTIN : 36AARFS3021L1ZW 		HYDS31748D

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A C Estab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Estab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Estab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Estab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Estab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Estab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Estab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Estab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L C Estab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Nonestab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Estab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Estab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Estab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Estab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Estab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Estab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Estab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Estab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Estab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Estab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Estab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
41) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Estab
42) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Estab
43) TORSION BAR LH[90]() Specification : TORSION BAR LH C Nonestab
44) TORSION BAR RH[90]() Specification : TORSION BAR RH C Nonestab
45) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
46) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
47) WHEEL SCOTCHE[90]() Specification : WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Nonestab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Nonestab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Nonestab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Nonestab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Nonestab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Nonestab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Estab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Estab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Nonestab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Estab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Estab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Estab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Nonestab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
41) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Estab
42) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Estab
43) TORSION BAR LH[90]() Specification : TORSION BAR LH C Nonestab
44) TORSION BAR RH[90]() Specification : TORSION BAR RH C Nonestab
45) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
46) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
47) WHEEL SCOTCHE[90]() Specification : WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B C Nonestab
48) HINGE 765 50 2448[90]() Specification : HINGE DRG. NO. 765-50-2448/A C Estab
49) BRACKET FUEL TANK BRACKET[90]() Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1 C Nonestab
50) SUB ASSY OF DIPSTICK[90]() Specification : S/A OF DIPSTICK, PART NO. B5028203#.1 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) UNION BULK HEAD (FOR MPV)[90]() Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A R Estab
2) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Estab
3) TORSION BAR[90]() Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C C Estab
4) HINGE ASSY LOAD BODY LADDER[90]() Specification : HINGE ASSY LOAD BODY (LADDER) HINGE ASSY LOAD BODY DRG.NO.VFJ/17/09/00004 C Nonestab
5) BOSS M6X12X30 OST 3[90]() Specification : BOSS M6X12X30 OST 3-1496-72 C Nonestab
6) BOSS M6X12X36 OST 3 1496 72[90]() Specification : BOSS M6X12X36 OST 3-1496-72 C Nonestab
7) BOSS M8X16X8 OST 3 1496 72[90]() Specification : BOSS M8X16X8 OST 3-1496-72 C Nonestab
8) THREADED BOSS[90]() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Nonestab
9) THREADED BOSS M12X 1 point 75 X OD 20X60 MM[90]() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Nonestab
10) THREADED BOSS M8 X 16MM OD X12MM[90]() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Nonestab
11) THREADED BOSS M8 X 16MM OD X25MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Nonestab
12) THREADED BOSS M12 X 20MM OD X30MM[90]() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Nonestab
13) THREADED BOSS M8 X 16MM OD X40MM[90]() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Nonestab
14) THREADED BOSS M10 X 20MM OD X 30MM[90]() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Nonestab
15) BOSS M12 X 25L[90]() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Nonestab
16) ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES[90]() Specification : ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES) C Nonestab
17) RETAINER[90]() Specification : RETAINER DRG NO. 765-69-49/B C Nonestab
18) TORSION BAR 765 58 191[90]() Specification : TORSION BAR DRG NO 765-58-191 C Estab
19) Torsion Bar Gost Std Wire[90]() Specification : Torsion Bar Gost Std./Wire Drg. No. 675-58-74/A C Estab
20) Bush Gost Std Bar Drg No 765 58 312 A[90]() Specification : Bush Gost Std./ Bar Drg No 765-58-312/A C Estab
21) BONNET LIFTING HOOK[90]() Specification : BONNET LIFTING HOOK DRG. NO. 620-01-1912-1/A , MATERIAL BRIGHTER IS:9550-80 C Nonestab
22) SHAFT 765 69 46 A[90]() Specification : SHAFT DRG. NO. 765-69-46/A C Nonestab
23) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
24) STRUT 765 50 1677 A[90]() Specification : STRUT DRG. NO. 765-50-1677/A C Nonestab
25) STRUT 765 50 1353 A[90]() Specification : STRUT DRG. NO. 765-50-1353/A C Nonestab
26) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Nonestab
27) BOSS BUMPER ASSEMBLY[90]() Specification : BOSS (BUMPER ASSEMBLY) DRG. NO. OFPM 640-01-3135-1 C Nonestab
28) BUSH RR DOOR LOCK[90]() Specification : BUSH (RR DOOR LOCK) TO DRG. NO. 640-01-4117-1, MATERIAL GR 42 CR4M02, IS:5517 C Nonestab
29) HANDLE LEVER 765 58 221 C[90]() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
30) UPPER STEEL ROD 645 01 1321 1[90]() Specification : UPPER STEEL ROD AS PER DRG. NO.645-01-1321-1,MATERIAL STEEL BAR C Nonestab
31) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
32) BOSS M12 X24 OD X 25 L[90]() Specification : BOSS M12 X24 (OD) X 25 L R Nonestab
33) BOSS M12 X 20 OD X 30L[90]() Specification : BOSS M12 X 20 (OD)X 30L R Nonestab
34) BOSS M12 X 20 OD X 65L[90]() Specification : BOSS M12 X 20(OD)X 65L C Nonestab
35) STEEL BLOCK SIZE 65X40X55 MM ST42 IS 1079[90]() Specification : STEEL BLOCK SIZE 65X40X55 MM ST-42-IS:1079 DRG. 645-01-7315-1/B FOR FINISH COMPONENT R Nonestab
36) SPRING WASHER DIA 6 IS 6735[90]() Specification : SPRING WASHER DIA 6 IS:6735 C Nonestab
37) AXLE GOST STD OBLIQUE BAR[90]() Specification : AXLE GOST STD./ BAR C Nonestab
38) HOOK PART NO 675 57271 A[90]() Specification : HOOK PART NO 675-57-271/A C Nonestab
39) WASHER SEAT BASE ASSY[90]() Specification : WASHER SEAT BASE ASSY C Nonestab
40) BOSS BRIGHT BAR DRG 620 01 1913 1 A[90]() Specification : BOSS BRIGHT BAR IS:9550-80 DRG 620-01-1913-1/A C Nonestab
41) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Nonestab
42) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Nonestab
43) TORSION BAR LH[90]() Specification : TORSION BAR LH C Nonestab
44) TORSION BAR RH[90]() Specification : TORSION BAR RH C Nonestab
45) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
46) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
47) WHEEL SCOTCHE[90]() Specification : WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B C Nonestab
48) HINGE 765 50 2448[90]() Specification : HINGE DRG. NO. 765-50-2448/A C Nonestab
49) BRACKET FUEL TANK BRACKET[90]() Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1 C Nonestab
50) SUB ASSY OF DIPSTICK[90]() Specification : S/A OF DIPSTICK, PART NO. B5028203#.1 C Nonestab
51) HANDLE ASSY 675 50 CB301[90]() Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301 C Estab
52) CASTING FOR COMMANDER RING[90]() Specification : CASTING FOR COMMANDER RING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SAFETY BELT (FOR MPV) Description : SAFETY BELT (FOR MPV)() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G R Estab
2) Casting for Bracket for Turret Assy. Description : Casting for Bracket for Turret Assy.() Specification : Casting for Bracket for Turret Assy. R Estab
3) CAST. FOR BODY FOR TURRET ASSY.() Specification : As per Specification/drawing C Estab
4) Eye 765 58 193 A Description : Eye 765 58 193 A() Specification : Eye 765-58-193/A C Estab
5) Handle Gost Std Description : Handle Gost Std() Specification : Handle Gost Std. (Handle Blank) C Estab
6) LEVER CONTROL HAND/TORSION BAR Description : LEVER CONTROL HAND/TORSION BAR() Specification : LEVER CONTROL HAND C Estab
7) LOCK() Specification : As per Specification/drawing LF No. 9013193414000 C Estab
8) AXLE Description : AXLE() Specification : AXLE DRG. NO. 765-50-1355 C Estab
9) BOSS M12x22x25 OST 3 1496 72 Description : BOSS M12x22x25 OST 3 1496 72() Specification : BOSS M12x22x25 OST 3-1496-72 C Estab
10) BOSS M20 BY 25 OD 30L Description : BOSS M20 BY 25 OD 30L() Specification : BOSS M20 X 25 (OD) X 30L C Estab
11) BOSS M6 OD 20 16 L Description : BOSS M6 OD 20 16 L() Specification : BOSS M6XOD(20)X16L C Estab
12) BOSS M8 20 OD 20 L Description : BOSS M8 20 OD 20 L() Specification : BOSS M8X20(OD)X 20L C Estab
13) BUSH FOR MPV ARMY VERSION BUSH Description : BUSH FOR MPV ARMY VERSION BUSH() Specification : BUSH FOR MPV ARMY VERSION BUSH PART NO.645-01-7511-1 FOR MPV. C Estab
14) PIVOT FOR RACE RING ASSY FOR MPV FINISH Description : PIVOT FOR RACE RING ASSY FOR MPV FINISH() Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B. C Estab
15) SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY) Description : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)() Specification : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY) C Estab
16) STRUT Description : STRUT() Specification : STRUT DRG. NO. 765-50-1676/A C Estab
17) THREADED BOSS M10X18MMX18MM Description : THREADED BOSS M10X18MMX18MM() Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8 C Estab
18) THREADED BOSS M10 18 29() Specification : THREADED BOSS M10X18X29 C Estab
19) THREADED BOSS M12 X 1 point 75() Specification : THREADED BOSS M12 X 1.75 LF No. 9013193479000 C Estab
20) THREADED BOSS M6 X 12MM OD X12MM Description : THREADED BOSS M6 X 12MM OD X12MM() Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2 C Estab
Category : p
Grade : 3
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]() Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1 E Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) CATCH OBLIQUE HOOK STEEL IS 4365 79 Description : CATCH OBLIQUE HOOK STEEL IS 4365 79() Specification : CATCH/HOOK STEEL IS:4365-79 C Estab
Category : p
Grade : 3
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) Right hand carrier - 172.62.136[06]() Specification : GOST:4543-71 C Nonestab
2) Left hand carrier - 175.62.137[06]() Specification : GOST 4543-71 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) DISTANCE SLEEVE[06]() Specification : GOST 977-75 (FINISHED CASTING) E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PLATE PRESSURE[06]() Specification : GOST1412-85 (FINISHED CASTING) E Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET BASE[06]() Specification : BRACKET BASE C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FILTER GAUZE TO LF NO 6206403021[62]() Specification : 172.42.025 C Nonestab
Category :
Grade : Grade III
Size : S