Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.
Specification : AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN
P
Estab
3) PLYWOOD BWR 19MM X 9PLY X 1.2MX1.2M (2270525256)
Description : PLYWOOD BWR 19MM X 9PLY X 1.2MX1.2M (2270525256)()
Specification : PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.
R
Estab
4) PLYWOOD 6MM X 5PLY X 1.2M X 1.2M (2270433342)
Description : PLYWOOD 6MM X 5PLY X 1.2M X 1.2M (2270433342)()
Specification : PLYWOOD TYPE MR GRADE TYPE BB SIZE 6MM x 5PLY x 1.2M x 1.2M SPECN: IS-303-1989 (3rd REVISION). REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013 WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK.
1) O RING 78X2 LF 2013436144
Description : O RING 78X2 LF 2013436144()
Specification : 'O' RING 78X2 (2013436144)
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING 67 5X2 4 F1301 043760 D LF 2013436145
Description : O RING 67 5X2 4 F1301 043760 D LF 2013436145()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED-01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
C
Estab
2) PRIMER GASKET F1301 036530 D LF 2013436143
Description : PRIMER GASKET F1301 036530 D LF 2013436143()
Specification : PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
C
Estab
3) O RING 68.6X2.2 MM F1301-024240-B (2013200384)
Description : O RING 68.6X2.2 MM F1301-024240-B (2013200384)()
Specification : DRG.NO. F1301-024240-B DC NO. 36345-A DT. 29/10/97 MATERIAL SPECN: IND/ME/884 (PROV.)
C
Estab
Category : p
Grade : 3
Size :
S
2264
SAINATH ENGINEERING WORKS
GAT NO.943/2 + 1B/2/1, Near Topaz Tiles SANASWADI, Tal-shirur Dist. Pune Maharashtra
PIN1 : 412208
Phone No. : 27030029
GSTIN : 27AALPC3817A1Z7
3) NOSE ASSY FOR BOMB 3 KG PRACTICE
Description : NOSE ASSY FOR BOMB 3 KG PRACTICE()
Specification : DRG.NO.ARDE 2024/DET.1 CONSISTING OF :(1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG.NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5(5)MULTI-TOOTH LOCK W
C
Estab
4) DRAG RING A & B
Description : DRAG RING A & B()
Specification : DRG NO. ARDE/ 2024 DET 33 AMENDED VIDE AL NO.650 DATED 14-3-90.
C
Estab
5) A SET OF LID, BOOSTER TUBE, CASE RING
Description : A SET OF LID, BOOSTER TUBE, CASE RING()
Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Estab
6) EMPLY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.
Description : EMPLY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.()
Specification : CQA(A) 2328
C
Estab
7) SET OF FIVE COMPONENTS OF 51MM ILLG. CONSISTING OF (I) BASE PLATE, (II) COLLAR, (III) EYE BOLT, (IV)
Description : SET OF FIVE COMPONENTS OF 51MM ILLG. CONSISTING OF (I) BASE PLATE, (II) COLLAR, (III) EYE BOLT, (IV)()
Specification : DRG. NO. ARDE-2064
C
Estab
8) PIN LOCKING FOR 51MM ILLG
Description : PIN LOCKING FOR 51MM ILLG()
Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 DC NO. 35882-A DT.26/12/94 SPECN.CQA(A) 2328 (d) DC-37332 -A DATED 01-03-2013
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) WASHER COPPER FOR SHELL 155MM ILLG M1A1
Description : WASHER COPPER FOR SHELL 155MM ILLG M1A1()
Specification : DRG NO. 2440A03076
C
Estab
2) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1
Description : HOLDER DELAY FOR SHELL 155 MM ILLG M1A1()
Specification : DRG NO. 2440A03062
C
Estab
3) BOW SHACKLE FOR SHELL 155 MM ILLG
Description : BOW SHACKLE FOR SHELL 155 MM ILLG()
Specification : BOW SHACKLE TO DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP
Description : 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
Specification : LOW DENSITY POLYTHENE LAY FLAT TUBE 22MM WIDE X 0.10 MM TO 0.15 MM THICK,TYPE-1.T0 SPECN:-JSS-9330-03-2014 REVISIONNO.3 DC NO.5429-ME DT.31/03/2016.
Specification : FIBRE STRIP VULCANISED 19.0 +/- 0.25 MM WIDE x 0.25 +/-0.025MM THICK. MINIMUM 350 METERS NOT EXCEEDING 375 MTRS IN COILSOF CONTINUOUS LENGTH. IN SIDE DIAMETER OF COIL 80MM TO 100MMAS PER LATEST SPECN:- BS-6091 (PT.I & II.) TYPE-B.
1) PLYWOOD 19MM X 9 PLY X 1.2MX1.2M (2270525257)
Description : PLYWOOD 19MM X 9 PLY X 1.2MX1.2M (2270525257)()
Specification : PLYWOOD M R GRADE TYPE A A TO SPECIFICATION IS-303-1989. (3rd REVISION).REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK.SIZE 1.2 M X 1.2 M X 9 PLY X 19 MM THICK
P
Estab
2) PLYWOOD 16MM X 9 PLY X 1.2MX1.2M (2270525255)
Description : PLYWOOD 16MM X 9 PLY X 1.2MX1.2M (2270525255)()
Specification : PLYWOOD MR GRADE TYPE A A TO SPECIFICATION IS-303-1989. (3rd REVISION).REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK.SIZE:- 1.2 M X 1.2 M X 9 PLY X 16 MM THICK
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.
1) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)
Description : BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Estab
2) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)
Description : BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
P
Estab
3) BOX C 235 STEEL MK 2by2 FOR CD14 point 11 LF 9911357158
Description : BOX C 235 STEEL MK 2by2 FOR CD14 point 11 LF 9911357158()
1) ALUMINIUM FOIL COATED WITH ADHESIVE AND PROTECTED WITH RELEASE PAPER 300MM WIDE TO IS 737 2008 REV NO4 GRADE 19000 CONDITION FOR FOIL AND PRESSURE SENSITIVE TAPE[06]()
Specification : 0.05+0.01MM THICK ALUMINIUM FOIL COATED WITH ADHESIVE AND PROTECTED WITH RELEASE PAPER 300MM WIDE TO IS 737:2008 REV NO4 GRADE 19000 CONDITION "O" FOR FOIL AND PRESSURE SENSITIVE TAPE (PLASTICISED PVC BASE ) TYPE 2 TO IS 132 62-199
R
Nonestab
2) EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KGS[10]()
Specification : AVERAGE DENSITY 18 TO 25 KGS/M3 SIZE 1 MTR X 0.5 MTR X 25 MM THICK
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CORRUGATED CARTON BOX COLOUR FOR PACKING SIGNAL[14]()
Specification : CORRUGATED CARTON BOX- COLOUR FOR PACKING OF FOG SIGNAL AS PER DRG NO 1] OFDR/FOG SIGNAL-41 CORRUGATED CARTON BOXES, 41/2, 41/2.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PACKING FITMENT OF 81MM ATAL SMOKE GRENADE[62]()
Specification : DRG.NO.HEMRL PYRO/SK.0275(PROV)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PROFEEL INNER PKG OF FZ ASY M GR LF 9911358099[99]()
Specification : SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE.
1) MOULDING OF PRIMER BODY & CONTACT (9911349627)
Description : MOULDING OF PRIMER BODY & CONTACT (9911349627)()
Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD
C
Estab
Category : p
Grade : 3
Size :
S
2271
INDIAN PACKAGING INDUSTRIES
SHANTI NIKETAN ( SUITE NO.10,2ND FLOOR ) 8,CAMAC STREET, KOLKATA -700017 WEST BENGAL SHANTI NIKETAN ( SUITE NO.10,2ND FLOOR ) 8,CAMAC STREET KOLKATA WEST BENGAL
PIN1 : 700017
Phone No. : 0761-274-3368
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.
2) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)
Description : BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
1) MOULDING OF PRIMER BODY & CONTACT (9911349627)
Description : MOULDING OF PRIMER BODY & CONTACT (9911349627)()
Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD
C
Estab
Category : p
Grade : 3
Size :
S
2277
KRISHNA SALES CORPORATION
167,(OLD CHINA BAZAR STREET, 2ND FLOOR)CALCUTTA-700001 167,(OLD CHINA BAZAR STREET, 2ND FLOOR) CALCUTTA W.B.
PIN1 : 700001
Phone No. : 0761-274-3368
1) High Pr. Seamless Gas Cyl. for 3-80 ltrs. for Compressed permanent & Liq. Gases
Description : High Pr. Seamless Gas Cyl. for 3-80 ltrs. for Compressed permanent & Liq. Gases()
Specification : Acetylene
P
Estab
Category : p
Grade : 3
Size :
L
2280
MARS AUTO PRIVATE LIMITED
92 B INDUSTRIAL AREA DADA NAGAR KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 8077477648
GSTIN : 09AAACM9658B1ZC
1) 6595050014 ANTI ST PLASTIC BOX FOR CTG 380[65]()
Specification : ANTI ST. PLASTIC BOX FOR CTG. .380"
R
Nonestab
2) 6595050015 PLASTIC BOX FOR PKG OF CARTG 30 06[65]()
Specification : PLASTIC BOX FOR PKG. OF CARTG 30-06
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Spring Type Cylindrical Plastic Stopper White[21]()
Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR
R
Estab
2) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]()
Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) PLASTIC ANTIQUE TIP BLACK[21]()
Specification : LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
R
Estab
2) PLASTIC RING WITH HOLE BLACK FOR CORD[21]()
Specification : PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS.
R
Estab
3) PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY[21]()
Specification : PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS.
R
Estab
4) PLASTIC STOPPER OG[21]()
Specification : PLASTIC STOPPER OG
SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94(2) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011
R
Estab
5) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]()
Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511
AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS
SPECIFICATION :- BEST TRADE QUALITY
R
Estab
6) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]()
Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX
AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS
SPECIFICATION :- BEST TRADE QUALITY
R
Estab
7) PLASTIC RING FOR CORD PSN 19 0511[21]()
Specification : PLASTIC RING FOR CORD PSN 19-0511
AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS
SPECIFICATION :- BEST TRADE QUALITY
R
Estab
8) PLASTIC RING FOR CORD PSN 19 5917[21]()
Specification : PLASTIC RING FOR CORD as per Drawing and sample held with OCFS Pantone Shade No 19 5917 TCX (green) as per Drawing No OCFS/TS/PRC & as per sample held with OCFS
Specification Best Trade quality
R
Estab
9) D RING PLASTIC 25MM WHITE FOR GLOVES ECW MODIFIED[21]()
Specification : D RING PLASTIC 25MM WHITE FOR GLOVES ECW MODIFIED
SPECIFICATION as per Appendix X of Schedule No DMSRDE/FFTT/2007/466/1
R
Estab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY CAP TO DRG NO IQX 14 IN FC WITHOUT PAINTING AND PASSIVATION FOR FUZE 162 MK 9[63]()
Specification : SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9
