List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2421 NEERAJ INDUSTRIES
31, IDC, HISSAR ROAD ROHTAK ROHTAK Haryana
PIN1 : 124001
Phone No. : 297014
GSTIN : 06AANPB7554K1ZF 		RTKS04687E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977[10]() Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991 R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Magnesium Powder Gr.B medium density, Apparent density : 0.65 to 0.85g/ml ,retained on 72 BSS/ 212 M() IS-2307-2004 R Estab
2) MAGNESIUM POWDER GR. IX() IS-2307-2004 (SECOND REV.) R Established
3) Magnesium powder grade “V� for explosive & pyrotechnic composition, medium density, passing th() IS-2307-2004 R Estab
4) Magnesium Powder Grade IV low density, Apparent density : 0.40 to 0.60 g/ml ,retained on 72 BSS/ 212() IS-2307-2004 R Estab
5) Magnesium Powder Grade I Apparent density:0.8 to 0.9 g/ml() IS-2307-2004 (Rev-II) R Non Established
6) Magnesium Powder Grade II Apparent density:0.8 to 0.9 g/ml() IS-2307-2004 R Non Established
7) Magnesium Powder Grade III Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
8) Magnesium Powder Grade IV Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
9) Magnesium Powder Grade VII Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
10) Magnesium Powder Grade VIII Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 (Rev-II) R Non Established
11) Magnesium Powder Grade IX Apparent density:0.4 to 0.6 g/ml() IS-2307-2004 R Non Established
12) Magnesium Powder Grade XI Apparent density:0.65 to 0.85 g/ml() IS-2307-2004 R Non Established
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Factory Itarsi
Name Specification Use Status
1) MAGNESIUM POWDER GRADE.IV() AS PER SPECIFICATION CS 5035 A(RECENT VERSION KNOWN AS D EF-STAN-13-130 E Not Estab
2) MAGNESIUM POWDER GRADE.V() AS PER SPECIFICATION CS 5035 A (RECENT VERSION KNOWN AS DEF-STAN-13-130 E Not Estab
Category : DP
Grade : II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) Magnesium Powder gr.III[10]() Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV) R Estab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MAGNESIUM PWDR GRR APP DEN NOT<.4&>.6G/[10]() Specification : IS 2307:2004 (SECOND REVISION) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001491890 MAGNESIUM POWDER GRADE B() SPECN NO. IS: 2307-1977 R Estab.
2) 1001491897 MAGNESIUM POWDER GRADE C-1() SPECN NO. IS: 2307-1977 R Estab.
Category : DDP
Grade : I
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001491890 POWDER MAGNESIUM GR B RETN 240 BSS Description : 1001491890 POWDER MAGNESIUM GR B RETN 240 BSS() Specification : IS-2307-1977 R Estab
2) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977 Description : 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977() Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) MAGNESIUM POWDER GR.B Description : MAGNESIUM POWDER GR.B() Specification : MAGNESIUM POWDER GR.B, PARTICLE SIZE BS SIEVE NO. AS PER CS-5035-A (A) 30 BSS = ALL PASS. (B) 44 BSS = NOT MORE THAN 15% RETAINED. (C) 100 BSS = NOT MORE THAN 15% PASS. (D) 120 BSS = ALL RETAINED. APPARENT DENSITY: 0.65 TO 0.85 g/ml & OT R Estab
Category : p
Grade : 3
Size : S
2422 VETRI ELASTOMERIC ENGINEERS
74/8A&9A, Ammanikondalampatty, Kattur, Nattamanagalam(PO), Salem-636010 Ammanikondalampatty Salem Tamilnadu
PIN1 : 636010
Phone No. : 2271816
GSTIN : 33AAMFV1039J1Z2 		AAMFV1039J

Download 		1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) BUS BAR FOR RGB 60[07]() Specification : AS PER HAPP DRG. NO. C ROC 060 1 134 C Estab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) diaphragm nozzle plate[03]() Specification : diaphragm nozzle plate C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) Assembly Centre Contact for RGB 60[03]() Specification : ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3. (L..F No. 0126701688) C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) LINER FOR RGB --60[04]() Specification : AS PER DRAWINGS C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) ASSY CONTACT [12]() Specification : IS 2305: 1962 & IS 3260: 1965 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BORE WEAR REDUCING LINER (BWRL) FOR M-92[64]() Specification/Drawing No. OFN/BMCS/M-92/BWRL C Nonestab
Category : p
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) BUS BAR FOR RGB 60[33]() Specification : IS 6603: 1972 GR 07 Cr 18 Ni 9 / STEEL TO IS 513 GR 0 EDD C Estab
Category :
Grade : Grade III
Size : S
2423 MITTER FASTENERS
ADMIN 3184/2, STREET NO. 14, NEW JANTA NAGAR, LUDHIANA NEW JANTA NAGAR LUDHIANA Punjab
PIN1 : 141003
Phone No. : 2494953
GSTIN : 03ALAPS4639Q1ZM 		JLDM02773B

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SPECIAL WASHER[90]() Specification : SPECIAL WASHER2-3/4"ODX21/32"IDX5/16"THICK DRG./PART NO.F-4934715 HA IPL NO. 105/7 P Estab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT 3 BY 8 X 24 UNF 2A Description : BOLT 3 BY 8 X 24 UNF 2A() Specification : BOLT 3/8" X 24 UNF-2A-1.405" LONG AS PER DRAWING DRG. /PART NO. F-3555311-D PHOSPATED C Estab
2) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
3) LOCK NUT M 18 Description : LOCK NUT M 18() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
4) PLAIN NUT M4 IS; 1364 92 PT-III() Specification : PLAIN NUT M12 (108-00) PLAIN NUT M12X1.5 (108-00) TO IS-1364-1992 PART-3 P.8 GALV & YELLOW PASSIVATED PT.NO.L-3021218 R Estab
5) Plain Washer M 10 Description : Plain Washer M 10() Specification : PLAIN WASHER M10 (104-ED) PLAIN WASHER M10 IS:2016 (TYPE 'A') GALVD & YELLOW CHROMIUM PLATED C Estab
6) Plain Washer M 8 Description : Plain Washer M 8() Specification : PLAIN WASHER M8 (102-15) PLAIN WASHER M8 (TYPE'A') IS : 2016 (1967) GALVD & YELLOW PASSIVATED C Estab
7) Set Screw M14X 1.5 X 45() Specification :Set Screw M14X 1.5 X 45 C Estab
8) Spherical Washer Description : Spherical Washer() Specification : As per specification/ Drg. C Estab
9) WASHER FRONT FLOORING Description : WASHER FRONT FLOORING() Specification : WASHER FRONT FLOORING C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT 3 BY 8 X 24 UNF 2A Description : BOLT 3 BY 8 X 24 UNF 2A() Specification : BOLT 3/8" X 24 UNF-2A-1.405" LONG AS PER DRAWING DRG. /PART NO. F-3555311-D PHOSPATED C Estab
2) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
3) LOCK NUT M 18 Description : LOCK NUT M 18() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
4) PLAIN NUT M4 IS; 1364 92 PT-III() Specification : PLAIN NUT M12 (108-00) PLAIN NUT M12X1.5 (108-00) TO IS-1364-1992 PART-3 P.8 GALV & YELLOW PASSIVATED PT.NO.L-3021218 R Estab
5) Plain Washer M 10 Description : Plain Washer M 10() Specification : PLAIN WASHER M10 (104-ED) PLAIN WASHER M10 IS:2016 (TYPE 'A') GALVD & YELLOW CHROMIUM PLATED C Estab
6) Plain Washer M 8 Description : Plain Washer M 8() Specification : PLAIN WASHER M8 (102-15) PLAIN WASHER M8 (TYPE'A') IS : 2016 (1967) GALVD & YELLOW PASSIVATED C Estab
7) Set Screw M14X 1.5 X 45() Specification :Set Screw M14X 1.5 X 45 C Estab
8) Spherical Washer Description : Spherical Washer() Specification : As per specification/ Drg. C Estab
9) WASHER FRONT FLOORING Description : WASHER FRONT FLOORING() Specification : WASHER FRONT FLOORING C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SLOTTED NUT Description : SLOTTED NUT() Specification : SLOTTED NUT PART NO. F3596815-A C Estab
2) LPTA Hex Nut M16 X 2 Description : LPTA Hex Nut M16 X 2() Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8 C Estab
3) LPTA PLAIN NUT M12 X 1 75 Description : LPTA PLAIN NUT M12 X 1 75() Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8 C Estab
4) LPTA PLAIN NUT M12X15 Description : LPTA PLAIN NUT M12X15() Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8 C Estab
5) LPTA Set of WASHER Description : LPTA Set of WASHER() Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET C Estab
6) LPTA SL CH HEAD SCREW M5X20 WITH NUT Description : LPTA SL CH HEAD SCREW M5X20 WITH NUT() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Spring Washer M 12 B[90]() Specification : SPRING WASHER M-12 IS;3063 SPRING WASHER M-12 TYPE 'B' IS : 3063 ZINC PLATED / GALVD & YELLOW PASSIVATED C Estab
2) Spg Washer M 16[90]() Specification : SPRING WASHER M16 (102-25) SPRING WASHER M16 TYPE'B' IS :3063 GALVD/ZINC PLATED WITH YELLOW PASSIVATED C Estab
3) Spg Washer M 18[90]() Specification : SPRING WASHER M18 (102-02) SPRING WASHER M18 (TYPE 'B') IS:3063 GALVD YELLOW PASSIVATED C Estab
4) Conical Washer[90]() Specification : CONICAL WASHER CONICAL WASHER DRG./PART NO.X-4904015-A C Estab
5) WASHER SPECIAL PART NO F4931410[90]() Specification : WASHER SPECIAL WASHER DRG./PART NO.F-4931410-HA C Estab
6) Washer part no F4912215[90]() Specification : WASHER WASHER DRG./PART NO.F-4912215-A C Estab
7) Spherical Washer PART NO F4939515[90]() Specification : SPHERICAL WASHER (AD) SPHERICAL WASHER (AD) DRG./PART NO.F-4939515-HD C Estab
8) WASHER PART NO F4952610[90]() Specification : WASHER WASHER DRG./PART NO.F-4952610 V1 C Estab
9) Plain Washer M 6[90]() Specification : PLAIN WASHER M6 (104-ED) PLAIN WASHER M6 (104-ED) TYPE 'A' IS-2016/67 GALVD & YELLOW PASSIVATED C Estab
10) Plain Washer M 8[90]() Specification : PLAIN WASHER M8 (102-15) PLAIN WASHER M8 (TYPE'A') IS : 2016 (1967) GALVD & YELLOW PASSIVATED C Estab
11) Plain Washer M 14[90]() Specification : PLAIN WASHER M14 (VTS) PLAIN WASHER M14 (STEEL) (TYPE 'A') IS:2016/67 GALVD & YELLOW PASSIVATED C Estab
12) Plain Washer M 18[90]() Specification : PLAIN WASHER M18 PLAIN WASHER M18/A20 (STEEL) IS : 2016/67 GALVD & YELLOW PASSIVATED C Estab
13) WASHER PART NO X4903610[90]() Specification : WASHER WASHER DRG./PART NO.X-4903610HASE C Estab
14) Washer M 12[90]() Specification : WASHER M12 WASHER M12 DRG./PART NO. F-4931440-D REF DRG F 4931140 D C Estab
15) Washer 18 MM[90]() Specification : WASHER M18 WASHER 18 MM PART NO.F-4932740-D REF DRG F-4931140-D C Estab
16) WASHER PART NO X4903810[90]() Specification : WASHER WASHER DRG./PART NO.X-4903810 HASE C Estab
17) WASHER PART NO F4914300[90]() Specification : WASHER WASHER DRG./PART NO.F-4914300-HB C Estab
18) Washer M12[90]() Specification : WASHER M12 SHAKE PROOF WASHER M12 FUEL TANK DRG./PART NO.F-3978000 HASE C Estab
19) WASHER PART NO F4933140[90]() Specification : WASHER 22 ODX16.5IDX1.5THICK WASHER 22 ODX16.5IDX1.5THICK DRG./PART NO.F-4933140 REF.DRG.No. F4931140 D C Estab
20) LOCKING WASHER PART NO F4938210[90]() Specification : LOCKING WASHER LOCKING WASHER DRG./PART NO. F-4938210-HB C Estab
21) WASHER PART NO F4930140[90]() Specification : WASHER WASHER DRG./PART NO.F-4930140-D REF. DRG. No.F4931140-D C Estab
22) Spherical Washer PART NO X4904115[90]() Specification : SPHERICAL WASHER SPHERICAL WASHER RG./PART NO.X-4904115-HASE C Estab
23) Spg Washer M 14[90]() Specification : SPRING WASHER M14 (VTS) SPRING WASHER M14 TYPE 'B' IS:3063 GALVD/ZINC PLATED WITH YELLOW PASSIVATED C Estab
24) Spg Washer M 5[90]() Specification : SPRING WASHER M-5 SPRING WASHER M-5 IS : 3063 GALVD & YELLOW PASSIVTED C Estab
25) Spg Washer M 6[90]() Specification : SPRING WASHER M6 SPRING WASHER M6. GALVD & YELLON PASSIVATED C Estab
26) Spg Washer M 10[90]() Specification : SPRING WASHER M-10 IS;3063 SPRING WASHER M-10 TYPE 'B' IS:3063 GALVD/ZINC PLATTED WITH YELLOW PASSIVATED C Estab
27) Spherical Seat PART NO X4904215[90]() Specification : BUSH BOLT SPHERICAL SEAT DRG./PART NO.X-4904215-HASE C Estab
28) Washer PART NO F4953010[90]() Specification : WASHER 30 ODX10.5IDX4MMTHICK WASHER 30 ODX10.5IDX4MMTHICK DRG./PART NO. F-4953010-V1 EF.DRG. No.F4952610 V1 C Estab
29) Washer PART NO F4949110[90]() Specification : WASHER 30 ODX8.4IDX2.5THICK WASHER FLAT STL. 8.4x30x2.5 DRG./PART NO. F-4949110-CO C Estab
30) Special Washer PART NO F4951215[90]() Specification : SPL.WASHER M-22 SPL.WASHER FOOT BRAKE DRG./PART NO.F-4951215-V1 ALTERNATE DRG.No.VFJ/17/09/00039 C Estab
31) Washer PART NO F4943215[90]() Specification : WASHER WASHER DRG./PART NO.F-4943215-A C Estab
32) Washer PART NO F4930240[90]() Specification : WASHER 22 MM. WASHER 22 MM. DRG./PART NO.F-4930240 REF DRG F 4931140 D C Estab
33) Washer PART NO X4901810[90]() Specification : WASHER WASHER DRG./PART NO.X-4901810 C Estab
34) Plain Washer m 12[90]() Specification : PLAIN WASHER M12 (102-04) PLAIN WASHER M12 TYPE 'A' IS:2016 (STEEL) GALVD & YELLOW PASSIVATED C Estab
35) NYLOCK NUT 7 by 8 inch[90]() Specification : NYL0CK NUT 7/8 NYLOC NUT 7/8" B.S.F. BS 4929 P-II GALVD & YELLOW PASSIVATED C Estab
36) NYLOCK NUT PART NO L3611218[90]() Specification : NYLOC NUT M12 (102-12) NYLOC NUT M12X1.75 (102-12) IS : 7002 P.8 GALVD & YELLOW PASSIVATED L3611218 C Estab
37) HEX NUT M 8[90]() Specification : NUT M8 (VTS) NUT M8 (VTS) IS:1364-1992 PART-III P.8 GALVD & YELLOW PASSIVATED L - 3010818 C Estab
38) NYLOCK NUT PART NO L3621218[90]() Specification : NYLOC NUT M12 (102-04) NYLOC NUT M12 X1.5 (102-04) IS - 7002 P.8 GALVD & YELLOW PASSIVATED C Estab
39) Screw M12 PART NO L2021230[90]() Specification : HEX SCREW M12 X 1.5X30 AGB SET SCREW M112 X 1.5 X 30- AGB IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
40) Screw M12 PART NO L2021235[90]() Specification : HEX SCREW M12X1.5x35 (VTS) SET SCREW M12 X 1.5 X 35 IS-1364-1992 PT.II P.8.8 ZINC GALVD & Y. PASSIVATED C Estab
41) Screw M12 PART NO L2021245[90]() Specification : HEX SCREW M12 X 1.5 X 45 HEX SCREW M12 X 1.5 X 45 IS:1364-92-PT.II P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-2021245 C Estab
42) PLAIN NUT M 6[90]() Specification : PLAIN NUT M6 (102-16) PLAIN NUT M6 (102-16) IS:1364-1992 PART-III, P.8 GALVD & YELLOW PASSIVATED C Estab
43) PLAIN NUT M 10 PART NO L3011018[90]() Specification : PLAIN NUT M10 (102-21) PLAIN NUT M 10 X 1.5 IS:1364-1992 PART-3 P.8 GALVD & YELLOW PASSIVATED C Estab
44) PLAIN NUT M 12[90]() Specification : PLAIN NUT M12 (108-00) PLAIN NUT M12X1.5 (108-00) TO IS-1364-1992 PART-3 P.8 GALV & YELLOW PASSIVATED PT.NO.L-3021218 C Estab
45) PLAIN NUT M 10 PART NO L3021018[90]() Specification : PLAIN NUT M10 (102-17) PLAIN NUT M10X1.25 IS:1364-1992 PART-III P.8 GALVD & YELLOW PASSIVATED C Estab
46) NYLOCK NUT M10 PART NO L3621018[90]() Specification : NYLOC NUT M10 (102-13) NYLOC NUT M10X1.25 (102-13) IS:7002 P-8 GALVD & YELLOW PASSIVATED L - 3621018 C Estab
47) NYLOCK NUT M 6[90]() Specification : NYLOCK NUT M 6 X 1 NYLOCK NUT M 6 X 1 IS-7002 P-8 GALVD & YELLOW PASSIVATED L3610618 C Estab
48) NYLOCK NUT M10 PART NO L3611018[90]() Specification : NYLOC NUT M10X1.5 IS:7002 NYLOCK NUT M10 X 1.5 IS:7002 P.8 ALVD & YELLOW PASSIVATED L-3611018 F C Estab
49) Lock Nut M12[90]() Specification : LOCK NUT M12 X 1.75 LOCK NUT M12 X 1.75 IS 1364 PT-III P.8 GALVD & YELLOW PASSIVATED C Estab
50) SCREW M10 PART NO L2021030[90]() Specification : HEX SCREW M10 X 1.25 X 30 SET SCREW M10 X 1.25 X 30 (102-17) IS:1364:1992 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
51) Screw M12 PART NO L2011225[90]() Specification : SET SCREW M12X1.75X25 SET SCREW M12X1.75X25 IS-1364-1992 PT-2 P.8.8 ZINC GALVD & YELLOW PASSIVATED C Estab
52) Screw M12 PART NO L2011235[90]() Specification : SET SCREW M12 X 1.75 X 35 SET SCREW M12 X 1.75 X 35 IS:1364-1992 PT-II P-8.8 ZINC/GALVD & Y.PASSIVATED C Estab
53) Screw M12 PART NO L2021240[90]() Specification : SET SCREW M12 X 1.5 X 40 SET SCREW M12 X 1.5 X 40 (102-02) L - 2021240 IS-1364-92 PT.2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
54) Screw M12 PART NO L2011240[90]() Specification : SET SCREW M12 X 1.75 X 40 SET SCREW M12 X 1.75 X 40 IS:1364-1992 (PT-II) P-8.8 GALVD & YELLOW PASSIVATED L-2011240 C Estab
55) LOCK NUT M22[90]() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
56) LOCK NUT M 18[90]() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
57) HEX NUT M16[90]() Specification : HEX NUT M16 IS-1364 PIII-P8 HEX NUT M16 X 2 IS-1364-1992 PT.III-P8 GALVD & YELLOW PASSIVATED C Estab
58) PLAIN NUT M 22[90]() Specification : PLAIN NUT M22 (AD) PLAIN NUT M22 IS-1364 PT.3.P.8 PHOSPHATED FINISH & OIL PASSIVATED AS PER IS: 3618 CLASS - B PT NO.L 3012218 C Estab
59) SCREW M10 PART NO L2011030[90]() Specification : HEX SCREW M10 X 1.5 X 30 SET SCREW M10X1.5X30(102-21) IS-1364-1992 PT-II P.8.8 CALVD & YELLOW PASSIVATED C Estab
60) NYLOCK NUT M 8[90]() Specification : NYLOC NUT M8X1 IS:7002 G&Y NYLOC NUT M8 X 1 IS: 7002 G&Y GALVD & YELLOW PASSIVATED C Estab
Category : p
Grade : Grade III
Size : S
2424 GURUKRUPA UDYOG
FLAT NO.5, TUKAI APT, JADHAV NAGAR, VADGAON BK, SINHGAD RD, PUNE - 411041 SINHGAD RD PUNE Maharashtra
PIN1 : 411041
Phone No. : 24357002
GSTIN : 27AQNPP9251B1ZL 		AQNPP9251B

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG WITH PAPER DISC.[14]() Specification : DRG.NO. AFK/SK-748-13 DT. 27.09.2013. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TRIMMED PLASTIC TUBE[21]() Specification : DRG NO AFK/SK-564-08 R Estab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLASTIC DISC AS PER DRG NO. KF/SK-1572 DATED 03-04-96,MATERIAL-LDPE,TYPE 2. TO SPECN. JSS:9330-03,2014 REV 3 DC:5429-ME[21]() Specification : KF/SK-1572 C Nonestab
2) TRAY PLASTIC MOULD TO DRG. NO.(AFK/SK - 2223 DT.13.12.91 ) 04-44-79000-06131-3, DC-35326-A.[21]() Specification : DRG. NO.(AFK/SK - 2223 DT.13.12.91 ) 04-44-79000-06131-3 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX WOOD TO HOLD 5 FUZES TIME K 3 M IN SEALED LININGS AS PER DRG. NO. NAI(V) 8324 (PROV.)[65]() Specification : DRG. NO. NAI(V) 8324 (PROV.) C Nonestab
2) BOX NO.B 201 MK 1 (A/N) WOOD,TO DRG. NO. ARM 1477C[65]() Specification : DRG. NO. ARM 1477C C Nonestab
3) AMN.CONT.BOX H-76 MK.1 DRG.NO IA 914 SHEET - 1 PART ISV 74 A SPECIFICATION - IA 948 TO BE PAINTED AS PER DRG.WITH PAINT OLIVE [65]() Specification : IA 948 C Nonestab
4) BOX M20C (WOOD) TO DRG.NO. CQA(A)/AMN/ST/365[65]() Specification : DRG.NO. CQA(A)/AMN/ST/365 C Nonestab
5) BOX NO.B 279 MK1/AIR/WOOD TO HOLD 40 DETONATOR AIRCRAFT BOMB NO.50,51,52,56,57,58,60 AND 64 IN 4 CYLINDER NO.293 DRG.NO. ARM 1466 D1 BASED ON DD(L) 8008[65]() Specification : DRG.NO. ARM 1466 D1 BASED ON DD(L) 8008 C Nonestab
6) BOX WOOD PACKING TO DRG NO. AFK/SK - 2823[65]() Specification : DRG NO. AFK/SK - 2823 C Nonestab
7) BOX WOOD NO :- S-5 MK-1(IN) AS PER DRG. NO.ARDE-2055 SHT NO.03 FOR PACKING OF SRCR, SRIR, SRCR(DUMMY) WITH PARTITION AS PER DRG.NO. ARDE 2055/1 (NOTE :- HEIGHT OF THE BOX TO BE TAKEN FOR SRCR ONLY)[65]() Specification : DRG. NO.ARDE-2055 SHT NO.03 C Nonestab
8) AMMUNITION CONTAINER BOX M 31-A,PLYWOOD FOR AMMN. CONTAINER ASSY, TO DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A[99]() Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A C Nonestab
9) BOX W 123 MK2 DESIGNER'S REF IA 882 PART NO ISV/69A DC 35436 A, SPECN IA 948 (a,k) DC 36868-A[65]() Specification : IA 948 (a,k) DC 36868-A. C Nonestab
10) BOX S-12 WOOD TO DRG.NO.NAI(V)5508 WITH 1)TIN LINER(EMPTY)TO DRG.NO.NAI(V)-5509/1,QTY-2NOS.2)PACKING PIECE-I,ASSY.TO DRG NO.NAI(V)-5509/2QTY-4NOS. 3)PACKING PIECE-II TO DRG.NO.NAI (V)-5509/3, QTY-4NOS. & 4)PACKING PIECE TO DRG.NO.NAI(V)- 5510/1, QTY-1NOS., TO HOLD 4 FUZES YDB-60. [65]() Specification : DRG.NO.NAI(V)5508 WITH 1)TIN LINER(EMPTY)TO DRG.NO.NAI(V)-5509/1,QTY-2NOS.2)PACKING PIECE-I,ASSY.TO DRG NO.NAI(V)-5509/2QTY-4NOS. 3)PACKING PIECE-II TO DRG.NO.NAI (V)-5509/3, QTY-4NOS. & 4)PACKING PIECE TO DRG.NO.NAI(V)- 5510/1, QTY-1NOS., C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TRI PLASTIC TUBE FOR SA 12 BORE 70M[21]() Specification : DRG. NO. AFK/SK-563-08 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) RECTIFIER GUNCOTTON PRIMERS MK-VIII, WOOD VARNISHED DRG. NO.DD(L) 6607 DC 34992-A[21]() Specification : DRG. NO.DD(L) 6607 C Nonestab
2) CASE WOOD PACKING 6 A/L, DESIG. REF. NO. CIA/ AMMN/508, SPECN IA 948[65]() Specification : IA 948 C Nonestab
3) CRATE ROCKET A/S RGB - 60 MK1 (IN) WOOD TO DRG NO. NAI (K)4502 (PROV.[65]() Specification : DRG NO. NAI (K)4502 (PROV.) C Nonestab
4) CASE WOOD PACKING NO.55 TO AFK DRG.NO.KF/1066[65]() Specification : DRG.NO.KF/1066 C Nonestab
5) CASE WOOD PACKING 7A/L TO DES. REF. CIA/AMN/570, SPECN IA 948 [65]() Specification : IA 948 C Nonestab
6) CRATE RGB-12, IN, MK-2 (PRACTICE) AS PER DRG. NO. NAI (B)- 4005 (PROV) dt. 20.08.2015[65]() Specification : DRG. NO. NAI (B)- 4005 (PROV) C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PIECES PACKING TOP AND BOTTOM SIZE 255MM LONG X 130 MM WIDEX 10 MM THICK OF THERMOCOLE OR CORRUGATED FIBRE BOARD CORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTHCORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTH[21]() Specification : AS PER SPECN. C Nonestab
2) PACKING FITMENT THERMOCOL FOR 40MM MGL/UBGL AMMUNITION TO DRG. NO. AFK/SK-735-12 DT.29.12.2012.[21]() Specification : AS PER AFK SPECN. C Nonestab
3) PIECES PACKING END SIZE 175 mm LONG X 140 mm WIDE X10 mm THICK OF THERMOCOLE OR CORRUGATED FIBRE BOARD (CORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTH 175MM)TO DRG.NO. KF/SK 1834 DT.16.01.89[21]() Specification : DRG.NO. KF/SK 1834 DT.16.01.89 C Nonestab
4) PIECES PACKING END SIZE 175 mm LONG X 140 mm WIDE X10 mm THICK OF THERMOCOLE OR CORRUGATED FIBRE BOARD (CORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTH 175MM)TO DRG.NO. KF/SK 1834 DT.16.01.8921]() Specification : DRG. NO.KF/SK-1834 DT. 16.1.89 C Nonestab
5) PIECE PACKING THERMOCOL BOTTOM AND MIDDLE SIZE 275 X 145 X 10MM THICKNESS AND MIDDLE HOLE 20MM DIA TO DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE[21]() Specification : DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE C Nonestab
6) PIECE PACKING THERMOCOL FRONT AND REAR SIZE 265 X 153 X 4MM THICKNESS TO DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.[21]() Specification : DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6 C Nonestab
7) PIECE PACKING THEROCOL LEFT AND RIGHT SIZE 153 X 140 X 4 MM THICKNESS TO DRG. NO. CQA(A)/AMN/3464 PART NO. ISV -2188, DET. 5 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.[21]() Specification : DRG. NO. CQA(A)/AMN/3464 PART NO. ISV -2188, DET. 5 C Nonestab
8) PIECE PACKING THERMOCOL TOP SIZE 275 X 145 X 20 MM THICKNESS, AND MIDDLE HOLE 20 MM DIA WITH SIDE CORNER CUT 40 X 25 MM TO DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.[21]() Specification : DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) ALUMINIUM FOIL PIECES SIZE 64 MM X 76 MM X 0.05 MM THICKNESSDRG NO. AFK/SK - 815 - 15 DT. 22.06.2015() Specification : DRG NO. AFK/SK - 815 - 15 R Estab
2) FERROUS SULPHATE L R GRADE() Specification : IS:262 (1982; SECOND REVISION) 20 KG IN PLASTIC JAR PACKING R Estab
3) HYDRATED LIME POWDER ATED LIME POWDER() Specification : HYDRATED LIME POWDER MINIMUM 90% PURITY R Estab
4) BAG 4A, POLYTHENE AS PER DESIGNER'S REFERENCE NO. CQA(A)/AMN/2715,PART NO. ISV 1851() Specification : AS PER CQA(A) SPECN. R Estab
5) BAG POLYTHENE TO DRG.AFK/SK-2229() Specification : AS PER AFK SPECN. R Estab
6) FOUR COLOUR PROCESS SET() Specification : FOUR COLOUR PROCESS SET (I.E YELLOW, CYAN, MAGENTA, BLACK) CHROMO SET FOR MUTTI COLOUR OFF SET PRINTING. R Estab
7) PAINT PREMIER GLOSS ENAMEL(NA) R/S.() Specification : IS-2932-2003 R Estab
8) ANIMAL TALLOW TYPE 2 IS:887-1977() Specification : IS: 887-1977 REAFFIRMED 2010 (SECOND REVISION) R Estab
9) PRE-PRINTED EXPLOSIVE LABELS() Specification : IS-13262: :1992 R Estab
10) FLEXIBLE LOAD BEARING POLYURE.FOAM() Specification : IS: 8255 - 1976 R Estab
11) DISC POLYTHENE OD 55 X 6 MM THICK() Specification : AS PER SPECN. R Estab
12) 100% VIRGIN POLYPROPYLENE STRAPPING OF SIZE 12 MM WIDE +1 MM, 0.6 MM THICK + 0.01 MM X 2000 METER LONG() Specification : AS PER AFK SPECN. R Estab
13) CELLOPHANE TAPE 12MM WIDE() Specification : IND/ME/662 R Estab
14) TAPE COTTON 6 MM WIDE() Specification : IND/ME/888 R Estab
15) ALUMINIUM FOIL BAG-MAT.LAMINATED() Specification : TECHNICAL REQUIREMENT AS PER CQA(A) LETTER NO.QA 17553/PR/II DATED 26-8-93 R Estab
16) ALUMINIUM FOIL BAG SIZE 250 MM X 180 MM() Specification : AS PER AFK SPECN. R Estab
17) LEATHER CHAMOIS SKIN GR.2() Specification : IS:1017-1983 R Estab
18) POLY BAG LAY FLAT 85X225X0.076 MMTH() Specification : JSS 9330-03:2007 REV 2 R Estab
19) POLY BAG DRG 1930 ISV 1715() Specification : DESGN.REF.NO.ARDE 1930 DET.NO.2 PART NO ISV 1715 R Estab
20) POLYTHENE BAGS 55CMX55CMX300GAUGE() Specification : JSS 9330-03:2014 REVISION NO. 3 R Estab
21) POLY. BAG 500 X 230 X 0.076 MM TH() Specification : AS PER AFK SPECN. R Estab
22) TRAY PLASTIC DRG AFK SK 2223() Specification : TRAY PLASTIC TO DRG NO 04-44-79000-06131-3, DC 35326-A R Estab
23) DISC POLYTHENE O.D. 55 MM X 3 MM TH() Specification : AS PER SPECN. R Estab
24) PLY WOOD1200X1200MMXX3MM IS303-1975() Specification : PLY WOOD FOR GENERAL PURPOSE,GRADE MR TYPE BB SIZE 120 cm X120 cm X 3 mm THICK, 3 PLY, SPECN IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6. R Estab
25) PLYWOOD 120X120X6MM IS:303-1975() Specification : IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6 R Estab
26) PLYWOOD 120X120CMX6MM THICK 5PLY() Specification : IS:303-1989 R Estab
27) POLY BAG6.6X.03WX8.00LX.01IN TH() Specification : DESIGNERS REF CIA/AMN/2072 PART NO ISV 1587 DC 36381-A. R Estab
28) LABEL SELF ADHESIVE 04-790-0031-006() Specification : IA 1033 DT. 13.7.94 R Estab
29) STICKER LABEL IA 984() Specification : LABEL I A 984 STICKER R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK Description : TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK() Specification : TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK SPECN.IND/ME/790(b): 2013 DC NO. 5266-ME, DT.24.06.2014 (EACH ROLL OF 50 MTRS.). P Estab
Category : s
Grade : 3
Size : S
2425 RIGHT TIGHT FASTNERS PVT. LTD.
18-A/31, MANISH KAVERI OFF. J.P. ROAD, FOUR BUNGALOWS, ANDHERI (WEST), MUMBAI – 400 053. Maharashtra
PIN1 : 400053
Phone No. : 6102037
GSTIN : 27AADCR3024M1ZB 		MUMR14786C

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) COLLAR TYPE HEX HEAD BOLT[90]() Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9 C Estab
2) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Estab
3) HEX HEADED BOLT 1/2[90]() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Estab
4) HEX HEADED SCREW M12X25MM[90]() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
5) HEX HEADED SCREW M12X1.75X30MM[90]() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
6) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
7) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
8) HEX NUT M16 X 2 IS1364[90]() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
9) HEX NUT M10 TO IS 1364[90]() Specification : HEX NUT M10 TO IS:1364 (PART-III)-8 C Estab
10) HEX NUT M8 IS 1364[90]() Specification : HEX NUT M8-IS:1364(PART-3)-8 C Estab
11) HEX HEAD NUT M12 TO IS1364[90]() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
12) HEX HEAD SCREW M8X30[90]() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
13) HEX BOLT IS 1364[90]() Specification : HEX BOLT M20x1.5x40 IS:1364 GRADE 8.8 GLAVANISHED & YELLOW C Estab
14) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
15) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
16) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
17) HEX NUT M6[90]() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
18) HEX HEADED BOLT M12 60[90]() Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL C Estab
19) HEX HD NUT M5 IS1363[90]() Specification : HEX HD NUT M5 IS:1363 C Estab
20) HEX HD BOLT M14 35 IS 1364[90]() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
21) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Estab
22) BOLT M 12 20 WITH NUT[90]() Specification : BOLT M12X20 WITH NUT & SPG WASHER GRADE-8.8 C Estab
23) HEX HEADED SCREW M 8 40 MM[90]() Specification : HEX HEADED SCREW M8X40 MM TO IS:1364 (PART-2)-8.8-PL-WITH HEX NUT M8 IS:1364 (PART-3)-8-PL C Estab
24) HEX HEADED SCREW M 8 25[90]() Specification : HEX HEADED SCREW M8X25 MM IS:1364 (PART-2)-8.8-PL C Estab
25) HEX HEADED BOLT M14 2 35 MM[90]() Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL C Estab
26) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
27) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
28) M20 TWO POINT FIVE 55 MM HEX BOLT[90]() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
29) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
30) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
31) NUT M12 CLEEVE LOC NUT[90]() Specification : NUT M12 CLEEVE LOC NUT C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) COLLAR TYPE HEX HEAD BOLT[90]() Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9 C Estab
2) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Estab
3) HEX HEADED BOLT 1/2[90]() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Estab
4) HEX HEADED SCREW M12X25MM[90]() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
5) HEX HEADED SCREW M12X1.75X30MM[90]() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
6) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
7) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
8) HEX NUT M16 X 2 IS1364[90]() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
9) HEX NUT M10 TO IS 1364[90]() Specification : HEX NUT M10 TO IS:1364 (PART-III)-8 C Estab
10) HEX NUT M8 IS 1364[90]() Specification : HEX NUT M8-IS:1364(PART-3)-8 C Estab
11) HEX HEAD NUT M12 TO IS1364[90]() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
12) HEX HEAD SCREW M8X30[90]() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
13) HEX BOLT IS 1364[90]() Specification : HEX BOLT M20x1.5x40 IS:1364 GRADE 8.8 GLAVANISHED & YELLOW C Estab
14) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
15) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
16) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
17) HEX NUT M6[90]() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
18) HEX HEADED BOLT M12 60[90]() Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL C Estab
19) HEX HD NUT M5 IS1363[90]() Specification : HEX HD NUT M5 IS:1363 C Estab
20) HEX HD BOLT M14 35 IS 1364[90]() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
21) HEX BOLT M 20 120 MPV[90]() Specification : HEX BOLT M20X120 TO IS:1364 FOR MPV GRADE 8.8 C Estab
22) BOLT M 12 20 WITH NUT[90]() Specification : BOLT M12X20 WITH NUT & SPG WASHER GRADE-8.8 C Estab
23) HEX HEADED SCREW M 8 40 MM[90]() Specification : HEX HEADED SCREW M8X40 MM TO IS:1364 (PART-2)-8.8-PL-WITH HEX NUT M8 IS:1364 (PART-3)-8-PL C Estab
24) HEX HEADED SCREW M 8 25[90]() Specification : HEX HEADED SCREW M8X25 MM IS:1364 (PART-2)-8.8-PL C Estab
25) HEX HEADED BOLT M14 2 35 MM[90]() Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL C Estab
26) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
27) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
28) M20 TWO POINT FIVE 55 MM HEX BOLT[90]() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
29) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
30) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
31) NUT M12 CLEEVE LOC NUT[90]() Specification : NUT M12 CLEEVE LOC NUT C Estab
32) ASSY WHEEL NUT M22[90]() Specification : ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510 C Nonestab
33) BOLT M10 70[90]() Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014 C Nonestab
34) FLANGE SCREW HEX[90]() Specification : FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9 C Nonestab
35) LPTA U Bolt with Nut[90]() Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH C Nonestab
36) SPECIAL SCREW M14 2 40[90]() Specification : SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY C Nonestab
37) SPECIAL SCREW M14 2 60[90]() Specification : SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FXL PT. NO. X3534611 V1 DRG NO. X3534511 V1 C Nonestab
38) SPECIAL SCREW M16 2 50[90]() Specification : SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1 C Nonestab
39) WHEEL BOLT M 22[90]() Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C C Nonestab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT 3 BY 8 X 24 UNF 2A Description : BOLT 3 BY 8 X 24 UNF 2A() Specification : BOLT 3/8" X 24 UNF-2A-1.405" LONG AS PER DRAWING DRG. /PART NO. F-3555311-D PHOSPATED C Estab
2) BOLT M12 X 1 point 75 X 95 Description : BOLT M12 X 1 point 75 X 95() Specification : BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED C Estab
3) HEX BOLT M20 1 POINT 5 40 Description : HEX BOLT M20 1 POINT 5 40() Specification : GRUB SCREW M6X2X10X6.6 IS 5370 C Estab
4) BOLT M8 X 85 IS:1364 GR-8.8() Specification : BOLT M8 X 80 IS - 1364 GR-8.8 C Estab
5) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
6) CSK SCREW M6X25() Specification : CSK SCREW M6X25MM C Estab
7) HEX HD NUT M20 Description : HEX HD NUT() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
8) HEX HEAD HIGH TENSILE BOLT Description : HEX HEAD HIGH TENSILE BOLT() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
9) HEX HEAD SCREW M12X50 Description : HEX HEAD SCREW M12X50() Specification : HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8 C Estab
10) HEX HEAD SCREW M8X30 Description : HEX HEAD SCREW M8X30() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
11) HEX HEAD SCREW M10X30MM() Specification : HEX SCREW M10 X 30 MMto IS:1364 (Part-2)-8.8 PL C Estab
12) HEX HEADED SCREW M8X16MM Description : HEX HEADED SCREW M8 16 MM() Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL C Estab
13) HEX SCREW M4X15MM() Specification : Set Screw M4X25mm IS:1364 1992 Part-2, P-8.8-Galvanized & Yellow passivated C Estab
14) Lock Nut M18 X 1.5() Lock Nut M18 X 1.5 Drg/Pt. No. F-3545015-HA C Estab
15) Set Screw M14 X 1.5 X 45() Specification : Set Screw M14 X 1.5 X 45 IS-1364/1992 Part-II, P-8.8 Galvanised & Yellow Passivated Drg./Pt. No.-H-2021445 C Estab
16) PLAIN NUT M4 IS:1364 92 PT-III() Specification :Plain Nut M4 IS:1364 92 PT-III P8, Galvanised & Yellow passivated Pt. No.-L3010418 C Estab
Category : p
Grade : 1
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Nut M16 X 2[90]() Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8 C Estab
2) LPTA PLAIN NUT M12X15[90]() Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8 C Estab
3) LPTA PLAIN NUT M12 X 1 75[90]() Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8 C Estab
4) LPTA SL CH HEAD SCREW M5X20 WITH NUT[90]() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
5) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Estab
6) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Nut M16 X 2[90]() Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8 C Estab
2) LPTA PLAIN NUT M12X15[90]() Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8 C Estab
3) LPTA PLAIN NUT M12 X 1 75[90]() Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8 C Estab
4) LPTA SL CH HEAD SCREW M5X20 WITH NUT[90]() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
5) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Estab
6) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Set Screw M6X30[90]() Specification : HEX SCREW M6 X30 (102-00) SET SCREW M6 X30 (102-00) IS : 1364-1992 PT-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
2) NYLOCK NUT 7 by 8 inch[90]() Specification : NYL0CK NUT 7/8 NYLOC NUT 7/8" B.S.F. BS 4929 P-II GALVD & YELLOW PASSIVATED C Estab
3) NYLOCK NUT PART NO L3611218[90]() Specification : NYLOC NUT M12 (102-12) NYLOC NUT M12X1.75 (102-12) IS : 7002 P.8 GALVD & YELLOW PASSIVATED L3611218 C Estab
4) BOLT M8 PART NO L1010816[90]() Specification : BOLT M8 X1.25 X80 BOLT M8 X 1.25 X 80 (102-18) IS - 1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-1010816 C Estab
5) BOLT M10 PART NO L1021009[90]() Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED C Estab
6) BOLT M12 PART NO L1011228[90]() Specification : BOLT M12 X 1.75 X 140 BOLT M12 X 1.75 X 140 IS:1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED L-1011228 C Estab
7) BOLT M12 PART NO L1011210[90]() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Estab
8) HEX NUT M 8[90]() Specification : NUT M8 (VTS) NUT M8 (VTS) IS:1364-1992 PART-III P.8 GALVD & YELLOW PASSIVATED L - 3010818 C Estab
9) BOLT M12 PART NO L1011212[90]() Specification : BOLT M12 X 1.75 X 60 BOLT M12 X 1.75 X 60 IS:1364-92 PT-1 P-8.8 GALVD & YELLOW PASSIVATED C Estab
10) BOLT M12 PART NO L1011209[90]() Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED C Estab
11) NYLOCK NUT PART NO L3621218[90]() Specification : NYLOC NUT M12 (102-04) NYLOC NUT M12 X1.5 (102-04) IS - 7002 P.8 GALVD & YELLOW PASSIVATED C Estab
12) BOLT M12 PART NO L1021214[90]() Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214 C Estab
13) Set Screw M8X30[90]() Specification : HEX SCREW M8 X 30 (104-ED) SET SCREW M8 X 30 (104-ED) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
14) SCREW PART NO L2011035[90]() Specification : HEX SCREW M10 X 1.5 X 35 SET SCREW M10 X 1.5 X 35 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
15) HEX SCREW M10 PART NO L2011020[90]() Specification : HEX SCREW M10 X 1.5X20 (104-ED HEX SCREW M10 X 1.5 X 20 IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
16) Screw M12 PART NO L2021230[90]() Specification : HEX SCREW M12 X 1.5X30 AGB SET SCREW M112 X 1.5 X 30- AGB IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
17) Screw M12 PART NO L2021235[90]() Specification : HEX SCREW M12X1.5x35 (VTS) SET SCREW M12 X 1.5 X 35 IS-1364-1992 PT.II P.8.8 ZINC GALVD & Y. PASSIVATED C Estab
18) Screw M12 PART NO L2021245[90]() Specification : HEX SCREW M12 X 1.5 X 45 HEX SCREW M12 X 1.5 X 45 IS:1364-92-PT.II P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-2021245 C Estab
19) PLAIN NUT M 6[90]() Specification : PLAIN NUT M6 (102-16) PLAIN NUT M6 (102-16) IS:1364-1992 PART-III, P.8 GALVD & YELLOW PASSIVATED C Estab
20) PLAIN NUT M 10 PART NO L3011018[90]() Specification : PLAIN NUT M10 (102-21) PLAIN NUT M 10 X 1.5 IS:1364-1992 PART-3 P.8 GALVD & YELLOW PASSIVATED C Estab
21) PLAIN NUT M 12[90]() Specification : PLAIN NUT M12 (108-00) PLAIN NUT M12X1.5 (108-00) TO IS-1364-1992 PART-3 P.8 GALV & YELLOW PASSIVATED PT.NO.L-3021218 C Estab
22) NYLOCK NUT M10 PART NO L3621018[90]() Specification : NYLOC NUT M10 (102-13) NYLOC NUT M10X1.25 (102-13) IS:7002 P-8 GALVD & YELLOW PASSIVATED L - 3621018 C Estab
23) NYLOCK NUT M 6[90]() Specification : NYLOCK NUT M 6 X 1 NYLOCK NUT M 6 X 1 IS-7002 P-8 GALVD & YELLOW PASSIVATED L3610618 C Estab
24) NYLOCK NUT M10 PART NO L3611018[90]() Specification : NYLOC NUT M10X1.5 IS:7002 NYLOCK NUT M10 X 1.5 IS:7002 P.8 ALVD & YELLOW PASSIVATED L-3611018 F C Estab
25) Lock Nut M12[90]() Specification : LOCK NUT M12 X 1.75 LOCK NUT M12 X 1.75 IS 1364 PT-III P.8 GALVD & YELLOW PASSIVATED C Estab
26) Set Screw M8X35[90]() Specification : HEX SCREW M8 X1 X 35 (102-01) SET SCREW M8 X 35 (102-01) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
27) Set Screw M6X40[90]() Specification : HEX SCREW M6 X40 (102-00) SET SCREW M6 X40 (102-00) IS : 1364-1992 PT-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
28) Set Screw M8X25[90]() Specification : HEX SCREW M8 X25 (102-22) SET SCREW M8 X25 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED C Estab
29) SCREW M10 PART NO L2021030[90]() Specification : HEX SCREW M10 X 1.25 X 30 SET SCREW M10 X 1.25 X 30 (102-17) IS:1364:1992 PT-II P-8.8 GALVD & YELLOW PASSIVATED C Estab
30) Screw M12 PART NO L2011225[90]() Specification : SET SCREW M12X1.75X25 SET SCREW M12X1.75X25 IS-1364-1992 PT-2 P.8.8 ZINC GALVD & YELLOW PASSIVATED C Estab
31) Screw M12 PART NO L2011235[90]() Specification : SET SCREW M12 X 1.75 X 35 SET SCREW M12 X 1.75 X 35 IS:1364-1992 PT-II P-8.8 ZINC/GALVD & Y.PASSIVATED C Estab
32) Screw M12 PART NO L2021240[90]() Specification : SET SCREW M12 X 1.5 X 40 SET SCREW M12 X 1.5 X 40 (102-02) L - 2021240 IS-1364-92 PT.2 P.8.8 GALVD & YELLOW PASSIVATED C Estab
33) Screw M12 PART NO L2011240[90]() Specification : SET SCREW M12 X 1.75 X 40 SET SCREW M12 X 1.75 X 40 IS:1364-1992 (PT-II) P-8.8 GALVD & YELLOW PASSIVATED L-2011240 C Estab
34) LOCK NUT M22[90]() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
35) LOCK NUT M 18[90]() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
36) HEX NUT M16[90]() Specification : HEX NUT M16 IS-1364 PIII-P8 HEX NUT M16 X 2 IS-1364-1992 PT.III-P8 GALVD & YELLOW PASSIVATED C Estab
37) Hex Screw M8[90]() Specification : HEX SCREW M8X1.25X 20 (102-06) HEX SCREW M8 X 1.25 X 20 IS:1364-1992 PT-2 P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L2010820 C Estab
38) Set Screw M6x25[90]() Specification : HEX SCREW M6 X25 (104-ED) SET SCREW M6 X25 (104-ED) IS:1364-92 PT-II P-8.8 GALVD & YELLOW PASSIVATED L - 2010625 C Estab
39) PLAIN NUT M 22[90]() Specification : PLAIN NUT M22 (AD) PLAIN NUT M22 IS-1364 PT.3.P.8 PHOSPHATED FINISH & OIL PASSIVATED AS PER IS: 3618 CLASS - B PT NO.L 3012218 C Estab
40) SCREW M10 PART NO L2011030[90]() Specification : HEX SCREW M10 X 1.5 X 30 SET SCREW M10X1.5X30(102-21) IS-1364-1992 PT-II P.8.8 CALVD & YELLOW PASSIVATED C Estab
41) NYLOCK NUT M 8[90]() Specification : NYLOC NUT M8X1 IS:7002 G&Y NYLOC NUT M8 X 1 IS: 7002 G&Y GALVD & YELLOW PASSIVATED C Estab
Category : p
Grade : Grade III
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile Description : Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile() Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile. C Estab
2) NUT 3 BY 8 UNF Description : NUT 3 BY 8 UNF() Specification : NUT 3/8" X PCP UNF 3B PLATED C Estab
3) BOLT M12 PART NO L1011210 Description : BOLT M12 PART NO L1011210() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Estab
4) PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 Description : PLAIN NUT M12 X 1 POINT 75 IS 1364 1992 PART 3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218() Specification : PLAIN NUT M12 X 1.75 IS 1364 1992 PART-3 P 8 GALVD AND YELLOW PASSIVATED DRG PART NO L 3011218 C Estab
5) LPTA Set of WASHER Description : LPTA Set of WASHER() Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET C Estab
6) LPTA SL CH HEAD SCREW M5X20 WITH NUT Description : LPTA SL CH HEAD SCREW M5X20 WITH NUT() Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET) C Estab
7) ASSY WHEEL NUT M22 Description : ASSY WHEEL NUT M22() Specification : ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510 C Estab
8) Axle Tube Nut-F-3550511A Description : Axle Tube Nut-F-3550511A() Specification : Axle Tube Nut Drg./Pt. No.- F3550511-A C Estab
9) SLOTTED NUT Description : SLOTTED NUT() Specification : SLOTTED NUT PART NO. F3596815-A C Estab
10) NYlock nut 7/8 '-F 3547515 Description : NYlock nut 7/8 '-F 3547515() Specification : Nylock Nut 7/8 "-F 3547515 C Estab
Category : p
Grade : 1
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8 Description : BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8() Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8 C Estab
Category : p
Grade : 1
Size : L
2426 New Star Industries
Budhewal Sugar Mill Road, VPO, Budhewal, Ludhiana Ludhiana Ludhiana Punjab
PIN1 : 141112
Phone No. : 9872990349
GSTIN : 03AABFN1450C1Z4 		JLDN00621F

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Estab
2) HEX HD NUT[90]() Specification : HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED C Estab
3) HEX HEADED BOLT M6 1 1 12 MM[90]() Specification : HEX HEADED BOLT M6X1X12 MM TO IS:1364 (PART-1) 8.8-BL C Estab
4) HEX HEADED BOLT M 20 45 MM[90]() Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT C Estab
5) HIGH TENSILE HEX BOLT[90]() Specification : HIGH TENSILE HEX. BOLT M20X2.5X55 MM LENGTH-IS:1364(PART-2)-8.8 -BL WITH HEX. NUT M20 IS:1364-(PART-3)-8-BL WITH SPRING WASHER A20 IS:3063 Cd PLATED BOLT NUT C Estab
6) HEX HEADED SCREW M8 16 MM[90]() Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL C Estab
7) HEX HD BOLT M12 45 IS 1364[90]() Specification : HEX HD BOLT M12X45 IS:1364 GRADE 8.8 GALVANISHED 7 YELLOW PASSIVATED C Estab
8) HEX BOLT M 12 40 IS 1364[90]() Specification : HEX BOLT M12X40 IS:1364 GRADE 8.8 GALVANISHED & YELLLOW PASSIVATED C Estab
9) HEX BOLT M20X50 IS 1364[90]() Specification : HEX BOLT M20X50 IS:1364 GRADE 8.8 GALVANISHED & YELLOW PASSIVATED C Estab
10) HEX BOLT M 12 30 IS 1364[90]() Specification : HEX BOLT M12X30 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED C Estab
Category : p
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOLT M12 X 1 point 75 X 95 Description : BOLT M12 X 1 point 75 X 95() Specification : BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED C Estab
2) BOLT M8 X 85() Specification : BOLT M8X85 IS:1364 GR-8.8 R Estab
3) BUSH BOLT Description : BUSH BOLT() Specification : BUSH BOLT 3/4" BSF DRG./PART NO.X-3534115(B) C Estab
4) Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile Description : Hex bolt 3 by 8 UNF one and half inch Bolt with sun lock nut and spring washer high tensile() Specification : Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile. C Estab
5) HEX HD BOLT M14 35 IS 1364 Description : HEX HD BOLT M14 35 IS 1364() Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8 C Estab
6) HEX HD NUT M5 IS1363 Description : HEX HD NUT M5 IS1363() Specification : HEX HD NUT M5 IS:1363 C Estab
7) LOCK NUT M 18 Description : LOCK NUT M 18() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
8) M20 TWO POINT FIVE 55 MM HEX BOLT Description : M20 TWO POINT FIVE 55 MM HEX BOLT() Specification : M20X2.5X55 MM HEX BOLT GRADE-8.8 GALV & YELLOW PASSIVATED C Estab
9) NUT 3 BY 8 UNF Description : NUT 3 BY 8 UNF() Specification : NUT 3/8" X PCP UNF 3B PLATED C Estab
10) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
11) PLAIN NUT M 4() Specification : PLAIN NUT M4 IS:1364 92 PT-III C Estab
12) BOLT M12 X20() Specification : BOLT M12 X 20 WITH NUT & SPG WASHER IS:1364 GR-8.8 C Estab
Category : p
Grade : 2
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) ASSY WHEEL NUT M22 Description : ASSY WHEEL NUT M22() Specification : ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510 C Estab
2) NYLOCK NUT 7 by 8 inch Description : NYLOCK NUT 7 by 8 inch() Specification : NYL0CK NUT 7/8 NYLOC NUT 7/8" B.S.F. BS 4929 P-II GALVD & YELLOW PASSIVATED, PART NO.-L-3651411 C Estab
3) NYLOCK NUT PART NO L3611218 Description : NYLOCK NUT PART NO L3611218() Specification : NYLOC NUT M12 (102-12) NYLOC NUT M12X1.75 (102-12) IS : 7002 P.8 GALVD & YELLOW PASSIVATED L3611218 C Estab
4) BOLT M12 PART NO L1011210 Description : BOLT M12 PART NO L1011210() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Estab
5) HEX NUT M 8 Description : HEX NUT M 8() Specification : NUT M8 (VTS) NUT M8 (VTS) IS:1364-1992 PART-III P.8 GALVD & YELLOW PASSIVATED L - 3010818 C Estab
6) Screw M12 PART NO L2021245 Description : Screw M12 PART NO L2021245() Specification : HEX SCREW M12 X 1.5 X 45 HEX SCREW M12 X 1.5 X 45 IS:1364-92-PT.II P.8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L-2021245 C Estab
7) PLAIN NUT M 6 Description : PLAIN NUT M 6() Specification : PLAIN NUT M6 (102-16) PLAIN NUT M6 (102-16) IS:1364-1992 PART-III, P.8 GALVD & YELLOW PASSIVATED, PT. NO. L-3010618 C Estab
8) PLAIN NUT M 10 PART NO L3011018 Description : PLAIN NUT M 10 PART NO L3011018() Specification : PLAIN NUT M10 (102-21) PLAIN NUT M 10 X 1.5 IS:1364-1992 PART-3 P.8 GALVD & YELLOW PASSIVATED C Estab
9) NYLOCK NUT M10 PART NO L3621018 Description : NYLOCK NUT M10 PART NO L3621018() Specification : NYLOC NUT M10 (102-13) NYLOC NUT M10X1.25 (102-13) IS:7002 P-8 GALVD & YELLOW PASSIVATED L - 3621018 C Estab
10) NYLOCK NUT M 6 Description : NYLOCK NUT M 6() Specification : NYLOCK NUT M 6 X 1 NYLOCK NUT M 6 X 1 IS-7002 P-8 GALVD & YELLOW PASSIVATED L3610618 C Estab
11) LOCK NUT M 12X1 Description : LOCK NUT M 12X1() Specification : L0CK NUT M12 X1 LOCK NUT M12 X 1 MM DRG./PT.NO.F-3554115 V1 C Estab
12) NYLOCK NUT M10 PART NO L3611018 Description : NYLOCK NUT M10 PART NO L3611018() Specification : NYLOC NUT M10X1.5 IS:7002 NYLOCK NUT M10 X 1.5 IS:7002 P.8 ALVD & YELLOW PASSIVATED L-3611018 F C Estab
13) Lock Nut M12 Description : Lock Nut M12() Specification : LOCK NUT M12 X 1.75 LOCK NUT M12 X 1.75 IS 1364 PT-III P.8 GALVD & YELLOW PASSIVATED, PART NO.-L-3111218 C Estab
14) NYLOCK NUT M 8 Description : NYLOCK NUT M 8() Specification : NYLOC NUT M8X1 IS:7002 G&Y NYLOC NUT M8 X 1 IS: 7002 G&Y GALVD & YELLOW PASSIVATED, PART NO. L-3620818 C Estab
15) LOCK NUT M22 Description : LOCK NUT M22() Specification : CHECK NUT M22x1.5 LOCK NUT M22x1.5 DRG./PART NO.F-3592615-2/C C Estab
16) LOCK NUT M 18 Description : LOCK NUT M 18() Specification : LOCK NUT M18X1.5 LOCK NUT M18 X 1.5 DRG./PART NO.F-3545015-HA C Estab
Category : p
Grade : 2
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) HEX NUT M6 Description : HEX NUT M6() Specification : HEX NUT M6 TO IS:1364-A (PART-III) C Estab
2) HEX NUT M16 X 2 IS1364 Description : HEX NUT M16 X 2 IS1364() Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8 C Estab
3) HEX HEAD NUT M12 TO IS1364 Description : HEX HEAD NUT M12 TO IS1364() Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL C Estab
4) HEX HEADED SCREW M12X25MM Description : HEX HEADED SCREW M12X25MM() Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
5) HEX HEADED SCREW M12X1.75X30MM Description : HEX HEADED SCREW M12X1.75X30MM() Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT. C Estab
6) HEX HEAD SCREW M12X50 Description : HEX HEAD SCREW M12X50() Specification : HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8 C Estab
7) HEX HEAD SCREW M8X30 Description : HEX HEAD SCREW M8X30() Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9 C Estab
Category : p
Grade : 2
Size : M
2427 Southfield Paints Limited
Plot No.102B-106, KIADB Industrial Area 3rd Phase, Malur Hosur Road, Kolar District Malur Karnataka
PIN1 : 563130
Phone No. : 234001
GSTIN : 29AACCS6565P1ZH 		AACCS6565Z

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)[65]() Specification : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION) R Nonestab
Category : p
Grade : Grade I
Size : M
2428 Yessar Industries
No B70/A 4th Main, Industrial Estate Rajaji Nagar Bangalore Karnataka
PIN1 : 560010
Phone No. : 65953673
GSTIN : 29AFGPR3550R1ZM 		AFGPR3550R

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERTS FOR 5.56 X 30MM BALL BULLET TO DRG. NO. AFK/SK-380-06 SHEET NO. 2 MATERIAL STEEL TO SPECIFICATION BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M BRIGHT DRAWN ANNEALED WIRE.[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
Category : p
Grade : Grade III
Size : S
2429 LUCKY BUS NEED
G1, Sree Anusha estate Shapur nagar hyderabad Telangana
PIN1 : 500055
Phone No. : 23194882
GSTIN : 36AEDPR1356P1Z0 		AEDPR1356P

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) POWER OPERATED REAR VIEW MIRROR SET FOR MPV[90]() Specification : POWER OPERATED REAR VIEW MIRROR SET CONSISTING OF ONE LHS MIRROR AND ONE RHS MIRROR ALONGWITH ITS ACCESSORIES USED ON HEAVY DUTY FOUR WHEELERS AS PER SPECIFICATION NO. OFPM/R&D/SP/ARMY/REAR VIEW MIRROR C Estab
Category : p
Grade : Grade III
Size : S
2430 MANOJ METAL CORPORATION
25/33 ARDESHIR DADY STREET NEAR ALANKAR CINEMA ARDESHIR DADY STREET MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 8779534421 		ABGPC1305H

Download 		1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE Description : BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE() Specification : BRASS ROUND 38.1 +0.25mm DIA TO SPECN BS-2874-CZ-121 PB3-"M" IN THE LENGTH OF2 MTRS (MINIMUM) LONG BAR. LATEST ISSUE R Estab
Category : p
Grade : 3
Size : S
2431 SUN ULTRA TECHNOLOGIES P. LTD.
SECTOR-A, MAHARAJPURA INDUSTRIAL AREA, PINTO PARK ROAD, GWALIOR MAHARAJPURA INDUSTRIAL AREA GWALIOR Madhya Pradesh
PIN1 : 474005
Phone No. : 2666088
GSTIN : 23AACCS7916A1ZR 		BPLS03176F

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) WELDING ELECTRODES SIZE: 3.15 MM[90]() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE P Estab
2) WELDING ELECTRODES SIZE: 4 MM[90]() Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
3) WELDING ELECTRODES SIZE: 5 MM[90]() Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION P Estab
Category : p
Grade : Grade III
Size : S
2432 SHRI GURUKRUPA ENTERPRISES
PLOT NO. 514, OLD SUMTHANA, BHADRAWATI BHADRAWATI CHANDRAPUR Maharashtra
PIN1 : 442902
Phone No. : 000000
GSTIN : 27AYFPK0405N1ZF 		AYFP00001N

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 2255050116 TIMBER N C SIZE 110MM X 16MM[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
2) 2255400600 TIMBER N C SIZE 210MM X 25MM[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]() Specification : SPECN. NO. IND/ME/883 (F) (PROV) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]() Specification : IND/ME/883(F) (PROV) R Nonestab
2) 2255540403 TIMBER N C SIZE 60 X 130MM[22]() Specification : IND/ME/883 (F) (PROV) R Nonestab
3) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]() Specification : IND/ME/883(F)(PROV) R Nonestab
4) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]() Specification : IND/ME/883(F)(PROV) R Nonestab
5) 2255406390 TIMBER N C SIZE[22]() Specification : IND/ME/883(F)(PROV) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]() Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2255058168 TIMBER MANGO[22]() Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) TIMBER NON CONIFEROUS TO SPECN IND ME 883 F 2015 DC 5452 ME DATED 01 06 2016 and SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE 250 MM 26 MM 155 MTR 2255402703[22]() Specification : TIMBER NON-CONIFEROUS TO SPECN IND / ME /883(F)-2015 DC 5452 (ME) DATED 01/06/2016 & SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE- 250 MM X 26 MM X 1.55 MTR E Nonestab
2) 6333501001 TIMBER PLANK SIZE 155 MM 19 MM 1 Point 25 MTRS AND TIMBER[63]() Specification : TIMBER PLANK SIZE:- 155 MM X 19 MM X 1.25 MTRS AND TIMBER :- DEODAR/SAL/CHIR TO SPEC.IND/ME/883(F) PROV C Nonestab
3) 6333501002 TIMBER PLANK SIZE 180 MM 26 MM 1 Point 55 MTR AND TIMBER[63]() Specification : TIMBER PLANK SIZE:- 180 MM X 26 MM X 1.55 MTR. AND TIMBER:DEODAR/SAL/CHIR TO SPEC IND/ME/833(F) PROV. C Nonestab
4) 2255568146 TIMBER MANGO SIZE 1000MM X 37MM X 110 MM[22]() Specification : SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016 R Nonestab
5) 2255568147 TIMBER MANGO SIZE 1200MM X 37MM X 80 MM[22]() Specification : SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016 R Nonestab
6) 2255568144 TIMBER MANGO SIZE 110 MM X 110 MM X 800 MM[22]() Specification : SPECN.IND/ME/883(F) DC5452-ME DT.01/06/ 2016 R Nonestab
7) 2255568145 TIMBER MANGO SIZE 1200 MM X 82 MM X 28 MM[22]() Specification : SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016 R Nonestab
8) 2255568143 TIMBER MANGO SIZE 1200 MM X 120 SIM X 25 MM[22]() Specification : SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016 R Nonestab
Category :
Grade : Grade III
Size : S
2433 Abhinav Yantrik Udyog Pvt. Ltd.
2/1 DR. R.M. Tagore Road Kolkata West Bengal
PIN1 : 700076
Phone No. : 033-25644296 		CALA01702B

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) CRANK ARM STEERING SYSTEM Description : CRANK ARM STEERING SYSTEM() Specification : CRANK ARM (STEERING SYSTEM) DRG. NO. HULL/MPV/100/A C Estab
Category : p
Grade : 3
Size : S
2434 KTS STEELS
12/3 GIRISH GHOSH ROAD BELURMATH HOWRAH West Bengal
PIN1 : 711202
Phone No. : 9051619969
GSTIN : 19AARFK2141H1Z6 		CALK13120C

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) STEEL ROUND 32 MM DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN TY 14 1 2884 80 AND OST B 84 748 81 LENGTH OF ROD[03]() Specification : STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BROGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW D R Estab
Category :
Grade : Grade III
Size : S
2435 RCN Engineers and Traders Pvt. Ltd.
6/6A Industrial Estate Adhartal Jabalpur Madhya Pradesh
PIN1 : 482004
Phone No. : 9300504030 		JBPR01667B

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BELT ASSEMBLY Description : BELT ASSEMBLY() Specification : BELT ASSEMBLY DRG NO. 765-50-CD 1043 C Estab
2) SPLIT PIN 5 50 IS 549 Description : SPLIT PIN 5 50 IS 549() Specification : SPLIT PIN 5X50 IS:549 C Estab
Category : s
Grade : 3
Size : S
1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies. Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.() Specification : Drg. No.ITW-63 C Estab
Category : p
Grade : 3
Size : S
2436 ENGINEERING AIDS
S.No. 199/5B, No. 14 Vayalanallur Vil Opposite Balaji Chamber, Poonamallee Taluk Chennai Tamil Nadu
PIN1 : 600072
Phone No. : 9176336333 		CHEE03623E

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) DRINKING WATER TANK Description : DRINKING WATER TANK() Specification : DRINKING WATER TANK DRG. NO. 640-01-1450-1/C C Estab
Category : p
Grade : 3
Size : S
2437 DAS AND CO
BALITIKURI NASKARPARA SASTITALA HOWRAH West Bengal
PIN1 : 711113
Phone No. : 8777604569
GSTIN : 19ADUPD0470G1ZH 		CALA10504E

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL).[70]() Specification : BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL). C Estab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C Description : Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C() Specification : AS PER DRG. C Estab
2) BLOCK REAR FINISH Drg. No SK 454/4/1 Description : BLOCK REAR FINISH Drg. No SK 454/4/1() Specification : AS PER DRG C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)() Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR) C Estab
Category : p
Grade : 3
Size : S
2438 SAS Autocom Engineers India Pvt. Ltd.
Plot No. 30 B-II Sipcot Industrial Complex Hosur Tamil Nadu
PIN1 : 635126
Phone No. : 04344-400383 		CHES20126B

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A Description : Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A() Specification : Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A C Estab
2) EXHAUST PIPE FOR MPV (ARMY) Description : EXHAUST PIPE FOR MPV (ARMY)() Specification : EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A) C Estab
3) SILENCER/ MUFFLER FOR MPV Description : SILENCER/ MUFFLER FOR MPV() Specification : SILENCER/ MUFFLER FOR MPV PART NO. X3967400 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) LPTA ASSY NYLON PIPE SET Description : LPTA ASSY NYLON PIPE SET() Specification : ASSY.NYLON PIPE SET IPL-BS-III LPTA-715-IPL SL.NO.129 TML PART NO.219843900113-e/219843900120-b OF BRAKE SYSTEM ITEM WITH SUITABLE MODIFICATION OF VOSS CONNECTION FOR FITMENT WITH SPRING BRAKE ACTUATOR (TY12/12) PART NO. 270742300101-a AN C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) SA OF PIPE EXHAUST Description : SA OF PIPE EXHAUST() Specification : S/A OF PIPE EXHAUST DRG./PART NO. B-4557104-A C Estab
2) TAIL PIPE Description : TAIL PIPE() Specification : TAIL PIPE FN100415HASE.0 C Estab
3) S A OF FLEXIBLE EXHAUST PIPE Description : S A OF FLEXIBLE EXHAUST PIPE() Specification : S/A OF FLEXIBLE EXHAUST PIPE P.NO. B 4573702 HASE.1 C Estab
4) STEERING PIPE RETURN LINE B2238210 Description : STEERING PIPE RETURN LINE B2238210() Specification : STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE. C Estab
5) STEERING PIPE RETURN LINE B2238211 Description : STEERING PIPE RETURN LINE B2238211() Specification : STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH. C Estab
6) STEERING PIPE RETURN LINE B2238212 Description : STEERING PIPE RETURN LINE B2238212() Specification : STEERING PIPE RETURN LINE, BS3 STEERING PIPE RETURN LINE, BS-III STALLION VEHICLE, PART NO. B2238212(B.1) C Estab
7) STEERING PIPE PRESS LINE B2238213 Description : STEERING PIPE PRESS LINE B2238213() Specification : STEERING PIPE PRESS.LINE BS3 STEERING PIPE PRESSURE LINE B2238213(B0)BS-III STALLION VEH. C Estab
8) S A Pipe RH Description : S A Pipe RH() Specification : S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386019-ND C Estab
9) S A Pipe LH Description : S A Pipe LH() Specification : S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386020-ND C Estab
10) Loose Hose Kit Description : Loose Hose Kit() Specification : LOOSE HOSE KIT LOOSE HOSE KIT PT.NO.B0F04602 A.0 C Estab
11) Modular Hose Kit Description : Modular Hose Kit() Specification : MODULAR HOSE KIT MODULAR HOSE KIT PT.NO. B0F04601 HASE.3 C Estab
12) Compressor Inter Pipe Description : Compressor Inter Pipe() Specification : COMPRESSOR INLET PIPE COMPRESSOR INLET PIPE PT.NO.B8342904-A. COMP INLET ON ENGINE C Estab
13) Compressor Outlet Pipe Description : Compressor Outlet Pipe() Specification : COMPRESSOR OUTLET PIPE COMPRESSOR OUTLET ON ENG. 1ST PIPE P. NO. B8342905-A. C Estab
14) Steel Pipe B8002602 Description : Steel Pipe B8002602() Specification : STEEL PIPE COMP TO AIR DRIER- STEEL PIPE COMP TO AIR DRIER-IIIRD PIPE DR.NO.B8002602-A. C Estab
15) SA OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING Description : SA OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING() Specification : S/A OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING TO DRG./PT. NO. B4457304(B) C Estab
Category : p
Grade : 3
Size : S
2439 National India Rubber Works Ltd.
Old Abkari Area, Rajiv Gandhi Ward Katni Madhya Pradesh
PIN1 : 483501
Phone No. : 0762-2235406
GSTIN : 23AAACT8479K1ZV 		JBPT00027G

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) GAITTER RUBBER Description : GAITTER RUBBER() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) GAITTER RUBBER Description : GAITTER RUBBER() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) GAITTER RUBBER Description : GAITTER RUBBER() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
Category : p
Grade : 3
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Rubber washer-X4900550 Description : Rubber washer-X4900550() Specification : Rubber washer, Drg./Pt. no.- X4900550 HASE C Estab
2) Rubber pad-F2600650 Description : Rubber pad-F2600650() Specification : Rubber pad, Drg./Pt. no. F2600650 C Estab
3) Sleeve-X1201250 Description : Sleeve-X1201250() Specification : Sleeve, Drg./Pt. no. -X1201250 HASE C Estab
Category : p
Grade : 3
Size : S
2440 LUMAX AUTOTECHNOLOGIES LIMITED
B-86, Phase-1, Mayapuri New Delhi Delhi
PIN1 : 110064
Phone No. : 9968294500
GSTIN : 07AAACD4090Q1ZA 		DELL03454D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) APPLE LIGHT Description : APPLE LIGHT() Specification : APPLE LIGHT MAKE JAGDISH, PARINO, JM-348, WITH BULB-24V, 05 W OR 06 W C Estab
2) Axle Flood Lamp Description : Axle Flood Lamp() Specification : Axle Flood Lamp Part no. F2341200 Drg. No. F2341400 B C Estab
3) Black Out Head Lamp Description : Black Out Head Lamp() Specification : Black Out Head Lamp Part No. F2341000 B C Estab
4) Black Out Stop Lamp Description : Black Out Stop Lamp() Specification : Black Out Stop Lamp Part No/Drg. No. F2341400B C Estab
5) FLEXIBLE READING LAMP Description : FLEXIBLE READING LAMP() Specification : FLEXIBLE READING LAMP 24V WITH 2 TO 5 WATT BULB MODEL-AMBASSADOR PT NO-4120900002 MAKE- CARDEC/BOSS C Estab
6) FOG LAMP Description : FOG LAMP() Specification : FOG LAMP WITH PLASTIC DUSTCOVER X2302600 V2 C Estab
7) HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) Description : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)() Specification : HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L C Estab
8) HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) Description : HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)() Specification : HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS, PT. NO. LHLT-201RH OR LUMAX PT. NO.005-HLA-R C Estab
9) REAR VIEW MIRROR LUMAX MAKE Description : REAR VIEW MIRROR LUMAX MAKE() Specification : REAR VIEW MIRROR LUMAX MAKE PART NO. RVM-007 C Estab
10) SIDE VIEW MIRROR Description : SIDE VIEW MIRROR() Specification : SIDE VIEW MIRROR SIZE 15" X 7" (L.H. 1 NO. & R.H. 1 NO.) LUMAX MAKE PART NO. SVM-003 C Estab
11) TAIL LAMP LH 4WAY TATA 407 Description : TAIL LAMP LH 4WAY TATA 407() Specification : TAIL LAMP LH 4 WAY (TATA 407), LUMAX MAKE PT. NO. MODEL NO. 1300 24V, 4-CHAMBER C Estab
12) TAIL LAMP RH 4WAY Description : TAIL LAMP RH 4WAY() Specification : TAIL LAMP RH 4 WAY (TATA 407), LUMAX MAKE PT. NO. MODEL NO. 1300 24V, 4-CHAMBER C Estab
13) TOW HOOK LAMP REVERSE LIGHT Description : TOW HOOK LAMP REVERSE LIGHT() Specification : TOW HOOK LAMP/REVERSE LIGHT PT.NO. F 2341100 B C Estab
14) WARNING LAMP ASSY AMBASSADOR Description : WARNING LAMP ASSY AMBASSADOR() Specification : WARNING LAMP ASSY WITH BULB (AMBASSADOR ISZ - 1800) WITH 8 WARNING LAMPS OF 24V, 2W-8-WAY (LUMAX/AUTOPAL) PT NO. MS-273A C Estab
15) ROTATORY SWITCH Description : ROTATORY SWITCH() Specification : CHANGE OVER/ ROTATORY SWITCH, PT. NO.-F2231800 C Estab
Category : p
Grade : 2
Size : M
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) C A Harness 12 Pin Socket Description : C A Harness 12 Pin Socket() Specification : C/A HARNESS 12 PIN SOCKET C/A HARNESS 12 PIN SOCKET PT.NO.B8805601 HASE C Estab
2) Tow Hook Lamp Description : Tow Hook Lamp() Specification : TOW HOOK LAMP REVERSE LIGHT PT.NO.X2310600-HASE. C Estab
3) Black Out Head Lamp X2310500 Description : Black Out Head Lamp X2310500() Specification : BLACK OUT HEAD LAMP BLACK OUT HEAD LAMP PT.NO.X2310500-A C Estab
4) Axle Flood Lamp X2310200 Description : Axle Flood Lamp X2310200() Specification : AXLE FLOOD LAMP AXLE FLOOD LAMP PT.NO.X2310200-A C Estab
5) Inspection Lamp Description : Inspection Lamp() Specification : INSPECTION LAMP INSPECTION LAMP PT.NO.F9E03900-A C Estab
6) Black Out Stop Lamp X2310300 Description : Black Out Stop Lamp X2310300() Specification : BLACK OUT STOP LAMP BLACK OUT STOP LAMP PT. NO.X2310300-A AXLE FLOOD LAMP. X2310200-A C Estab
7) LPTA BLACK OUT LAMP REAR 4 PER VEH Description : LPTA BLACK OUT LAMP REAR 4 PER VEH() Specification : BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105. C Estab
8) LPTA ASSY CAB LAMP BULB 24VBS III Description : LPTA ASSY CAB LAMP BULB 24VBS III() Specification : ASSY CAB LAMP (WITH BULB-24V) BS-III VEHICLE PART NO. C Estab
9) LPTA STARTER PUSH BUTTON Description : LPTA STARTER PUSH BUTTON() Specification : STARTER PUSH BUTTON 2101 5450 9906 C Estab
10) LPTA ASSY CABLE SET WITH 12POLE SKT Description : LPTA ASSY CABLE SET WITH 12POLE SKT() Specification : ASSY CABLE SET WITH 12 POLE SOCKET BS-III VEHICLE (LPTA) PART NO.261454820103a. C Estab
11) LPTA CONVOY LAMP ALONGWITH LAMP Description : LPTA CONVOY LAMP ALONGWITH LAMP() Specification : CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III. C Estab
12) LPTA BLACKOUT LAMP FRONT 2 PER VEH Description : LPTA BLACKOUT LAMP FRONT 2 PER VEH() Specification : BLACKOUT LAMP FRONT, TML PT.NO.0005440814/215454409902/257454409915, FITTED WITH 24V, 21WATT BLUB,TML PT.NO.62120520046 C Estab
13) LPTA ASSY TAIL LAMP RH and LH 24VBS 3 Description : LPTA ASSY TAIL LAMP RH and LH 24VBS 3() Specification : ASSY TAIL LAMP RH & LH 24V (05 CHAMBER) ALONGWITH LAMP. LPTA715 BS-III.PART NO. 280954441602 & 280954441603 REF.DRG. 2641 5440 0447) C Estab
14) LPTA ASSY FRONT FOG LAMP 24VBS III Description : LPTA ASSY FRONT FOG LAMP 24VBS III() Specification : ASSY FRONT FOG LAMP 24V YELLOW COLOUR, LPTA715 BS-III. PART NO.283954440113(DRG NO 28085440402) PART NO. 2839 5444 0117 (DRG NO. 28085440 0404) C Estab
15) LPTA A SET OF CLEAR LENS ASSY Description : LPTA A SET OF CLEAR LENS ASSY() Specification : A SET OF CLEAR LENS ASSY. HEAD LAMP MOTORISED 24V RH AND LH ALONGWITH BULB PART NO.280954440118(RH)MOD- D & 280954440117MOD-D (DRG. NO. 2641 5440 0438) C Estab
Category : p
Grade : 2
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) C A Harness 12 Pin Socket Description : C A Harness 12 Pin Socket() Specification : C/A HARNESS 12 PIN SOCKET C/A HARNESS 12 PIN SOCKET PT.NO.B8805601 HASE C Estab
2) Tow Hook Lamp Description : Tow Hook Lamp() Specification : TOW HOOK LAMP REVERSE LIGHT PT.NO.X2310600-HASE. C Estab
3) Black Out Head Lamp X2310500 Description : Black Out Head Lamp X2310500() Specification : BLACK OUT HEAD LAMP BLACK OUT HEAD LAMP PT.NO.X2310500-A C Estab
4) Axle Flood Lamp X2310200 Description : Axle Flood Lamp X2310200() Specification : AXLE FLOOD LAMP AXLE FLOOD LAMP PT.NO.X2310200-A C Estab
5) Inspection Lamp Description : Inspection Lamp() Specification : INSPECTION LAMP INSPECTION LAMP PT.NO.F9E03900-A C Estab
6) Black Out Stop Lamp X2310300 Description : Black Out Stop Lamp X2310300() Specification : BLACK OUT STOP LAMP BLACK OUT STOP LAMP PT. NO.X2310300-A AXLE FLOOD LAMP. X2310200-A C Estab
7) LPTA BLACK OUT LAMP REAR 4 PER VEH Description : LPTA BLACK OUT LAMP REAR 4 PER VEH() Specification : BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105. C Estab
8) LPTA ASSY CAB LAMP BULB 24VBS III Description : LPTA ASSY CAB LAMP BULB 24VBS III() Specification : ASSY CAB LAMP (WITH BULB-24V) BS-III VEHICLE PART NO. C Estab
9) LPTA STARTER PUSH BUTTON Description : LPTA STARTER PUSH BUTTON() Specification : STARTER PUSH BUTTON 2101 5450 9906 C Estab
10) LPTA ASSY CABLE SET WITH 12POLE SKT Description : LPTA ASSY CABLE SET WITH 12POLE SKT() Specification : ASSY CABLE SET WITH 12 POLE SOCKET BS-III VEHICLE (LPTA) PART NO.261454820103a. C Estab
11) LPTA CONVOY LAMP ALONGWITH LAMP Description : LPTA CONVOY LAMP ALONGWITH LAMP() Specification : CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III. C Estab
12) LPTA BLACKOUT LAMP FRONT 2 PER VEH Description : LPTA BLACKOUT LAMP FRONT 2 PER VEH() Specification : BLACKOUT LAMP FRONT, TML PT.NO.0005440814/215454409902/257454409915, FITTED WITH 24V, 21WATT BLUB,TML PT.NO.62120520046 C Estab
13) LPTA ASSY TAIL LAMP RH and LH 24VBS 3 Description : LPTA ASSY TAIL LAMP RH and LH 24VBS 3() Specification : ASSY TAIL LAMP RH & LH 24V (05 CHAMBER) ALONGWITH LAMP. LPTA715 BS-III.PART NO. 280954441602 & 280954441603 REF.DRG. 2641 5440 0447) C Estab
14) LPTA ASSY FRONT FOG LAMP 24VBS III Description : LPTA ASSY FRONT FOG LAMP 24VBS III() Specification : ASSY FRONT FOG LAMP 24V YELLOW COLOUR, LPTA715 BS-III. PART NO.283954440113(DRG NO 28085440402) PART NO. 2839 5444 0117 (DRG NO. 28085440 0404) C Estab
15) LPTA A SET OF CLEAR LENS ASSY Description : LPTA A SET OF CLEAR LENS ASSY() Specification : A SET OF CLEAR LENS ASSY. HEAD LAMP MOTORISED 24V RH AND LH ALONGWITH BULB PART NO.280954440118(RH)MOD- D & 280954440117MOD-D (DRG. NO. 2641 5440 0438) C Estab
Category : p
Grade : 2
Size : L