As per Drg. No. IMPD-1424. The timber species used to manufacture paddles are Chaplash, Deodar, Kathal, Aini, Gamari, Teak, Padauk, Kail and Champak as per IS: 1325 and IS: 399. The paddles shall govern the Preservation/Painting workmanship QA & Testing as per Appendix 'H' of Specn No. CQAE/1940/1548/g.
FLOOR BOARD ASSEMBLIES COMPLETE WITH INTERLOCKING & SIDE LOCKING STRINGER
Specification
(I) ALLUMINIMUM FLOOR BOARD(3 PIECES) - IS 737 MARINE GRADE 1 SET
(II) SIDE STRINGER - ALLUMINUM - 4 NOS
(III) CHANNEL Z SECTION- ALLUMINUM - 6 NOS
(IV) CHANNEL H SECTION- ALLUMINUM - 3 NOS
(V) CHANNEL A SECTION- ALLUMINUM - 3 NOS
As per NCD 4006 Issue- 3 Mar 2014
TRANSOM MADE OF MARINE PLYWOOD (18.0 MM & 12.0 MM)
Specification
As per NCD 4006 Issue-3 March 2014 Clause 5.12 & encapsulated in FRP reinforcement complete with keel Retaining Block, Floor Support Wood & Aluminum Plate for OBM Mounting (300 CSM + 9 mm Marine Ply + 300 CSM + 18 mm Marine Ply + 300 CSM)
IS:4727-1968 except for :-
i) Parameters Specification
Page 4, Table picks/dm:140+- 5%
1, Vty. No. 2 No of folds in weft
yarn- 1
iii) Sampling Plan & Criteria of conformity shall be as per CQAT&C/QAI NO. CQAT&C/QAI/TC-8/7(b).
iv) In appearance, workmanship,
finish & all other respects not
defined in this IS Specn. the
material shall conform to the
sealed pattern held in the custody
of the Controller, CQAT&C,
KANPUR.
V) Packing & Marking: As per
schedule No. CIT&C/PMS/41
i. FABRICATION OF SOCKS BLACK.
ii. THE FABRICATION INCLUDES KNITTING, LINKING, WASHING, PRESSING AND PASSING OPERATION.
iii. FABRICATION OF SOCKS BLACK WILL BE STRICTLY AS PER SPECN AIR HQ/DQAS/AK-037, DS CAT NO 8440-000467 TO 473.
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction : 40%
width direction : 92.5 to 100%
SPECN-IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
Specification
IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction : 40%
width direction : 92.5 to 100%
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101533177
382
Metre
89
110190304
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C, KANPUR
(iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant clause of specn.
(iv)Pre inspection, warranty and Advance sample Clause as per specification.
WEBBING NYLON BLUE OF SIZES (FOR COMBINATION HARNESS-CHEST& SIT) ONE SET CONSISTING OF
(1) WEBBING NYLON THICK 48MM WIDE BLUE - 7.00 MTR
(2) WEBBING NYLON THIN 38MM WIDE BLUE - 4.70 MTR
(3) WEBBING NYLON THIN 25MM WIDE BLUE - 1.15 MTR
DMSRDE/T&GS/93/411(b) AND IN APPEARANCE, SHADE, FINISH ANDDM IN OTHER RESPECTS NOT DEFINED IN SPECIFICATION, THE MATERIAL SHALL CONFORM TO THE CORRESPONDING SEALED PATTERN HELD IN CUSTODY OF THE CONTROLLER, CQA(T&C), KANPUR 1.EACH WEBBING TO BE SUPPLIED IN ROLL FORM i.e.MULTIPLE OF SCALE X SET+5MTR FOR TESTING 2. MIN. ROLL LENGTH IS 100MTR FOR EACH WEBBING )
3. ALL THE THREE WEBBING SHOULD BE OF SAME SHADE.
100% POLY. TAPE 25MM (ROLL LENGTH 100M EXCLUDING SAMPLE)
1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load(20 cm X full width)("KN.") Minimum 2.4 IS:1969
6 Nature of material 100% Polyster. IS:667
7 pH Value(Cold Method) 6 to 8.5 IS:1390
8 % Water soluble matter(max) 1% IS:3456
9 Weave 2/2 Twill weave. Visual
Specification
1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load(20 cm X full width)("KN.") Minimum 2.4 IS:1969
6 Nature of material 100% Polyster. IS:667
7 pH Value(Cold Method) 6 to 8.5 IS:1390
8 % Water soluble matter(max) 1% IS:3456
9 Weave 2/2 Twill weave. Visual
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101797674
992883
Metre
100
110190293
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
i. FABRICATION OF SOCKS BLACK.
ii. THE FABRICATION INCLUDES KNITTING, LINKING, WASHING, PRESSING AND PASSING OPERATION.
iii. FABRICATION OF SOCKS BLACK WILL BE STRICTLY AS PER SPECN AIR HQ/DQAS/AK-037, DS CAT NO 8440-000467 TO 473.
