DEFLATION VALVE TYPE FTU-50 BOAT A

DEFLATION VALVE TYPE FTU-50 BOAT A

DUCK COTTON 610GM OG91.4 CM U/PROFED

SPECN NO.IS:1422-1983

NEOPRENE COATED NYLON FABRIC 650 GM 50 gm sqr mtr Width 101CM

Specn no. CQAE/1940/ 1613/a

HYPALON COATED POLYESTER FABRIC OUT SIDE COATING HYPALON & INSIDE COATING POLYCHLOROPRENE WIDTH 130 CM

SPECN-AS PER APPENDIX "D" ATTACHED WITH SPECN.NO.NCD 1104 ISS-UE-1 1997. (COPY ENCLOSED)

POLYGEN HOLLOW

AS PER DRG. NO. OPF/DO/ME/263

AS PER DRG. NO. OPF/DO/ME/263

FOOT PUMP FOR BOAT SILLINGER

SPECN NO.AS PER SAMPLE

HYPALON COATED POLYESTER FABRIC OUT SIDE COATING HYPALON & INSIDE COATING POLYCHLOROPRENE WIDTH 130 CM

SPECN-AS PER APPENDIX "D" ATTACHED WITH SPECN.NO.NCD 1104 ISS-UE-1 1997. (COPY ENCLOSED)

FABRIC COTTON 340 GM ( DUCK COTTON ) OG 92cm MINIMUM

Specification IS:1422-1983

• As Per Specification/Drawing

• As Per Specification/Drawing

SHACKLE D SHAPED LARGE

SPECIFICATION: DRAWING NO ADRDE/303(c)

BOX FOR PACKING OF BOAT INFLATABLE

BOXES SHOULD BE MADE FROM 20MM THICK WELL FINISHED & FREE FROM KNOTS & CRACKS TIMBER CHIR WOOD. SIX SUITABLE STEEL HANDLE SHOULD BE PROVIDED IN THE BOX (TWO LENGTHWISE AND ONE WIDTH WISE ON EACH SIDE). SIZE- 2000MMX700MMX400MM. (INSIDE DIMENSION).

FABRIC NYLON 66,37GM U/D 95 CM

Technical particulars no. ADRDE/QAC/ Tech. Part/03/45 dtd. 28-01-2003

ROW WOODEN (DEODAR WOOD)

IS : 1326 DEO DARWOOD 1.524MX1.207MX0.32M

SAGON (TEAK WOOD) WOOD SIZE 2MX250MMX75MM

IS :326 WOOD SHOULD BE WELL SEASONED AND FREE FROM OBJECTIONABLE CRACKS AND KNOTES

KEEL (PART-I, PT-ii, PT-iii), ALLU.ALLOY “U” CHANNEL FOR IN.BOAT

DRG.NO.OPF/DO/ME-285,286,287, AND 264

TRANSOM OR OBM (SUB ASSY) FOR INFLATABLE BOAT

SPECN NO.DRG NO.OPF/D O/ME-288 along with annexure A

MARIN PLY FLOOR PLATEFORM

IS : 710 Marine pLY SHEET (2.44MX1.22MX15MM)

Fabric Nylon 32gm U/D 103cm width +2/-0.

ADRDE/QMS/TDTM/specn/95 with following Note :- Note (1) The Nylon multifilament yarn which is to be used to manufacture the fabric should have minimum Tenacity of 6.5 gms per denier. (2) There should be not be any type of yarn distortion/yarn slippage in fabric.

WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).

SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling

NIV-FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM. PROV

SPECN.NO.IND/TC/2562

• As Per Specification/Drawing

• As Per Specification/Drawing

WEBBING NYLON 44 MM U/D 17800N

SPECN. NO.: IS:4727-1968 except for :- i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and C/QAI/TC-8/7(b). ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn. the material shall conform to the sealed pattern held in the custody of the Controller,CQAT and C,KANPUR. iii)PACKING and MARKING : As per schedule No. CIT and C/PMS/41.

SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting

SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting

ADHESIVE TYPE -B

IND/ENG/PROV/1193/d

• As Per Specification/Drawing

• As Per Specification/Drawing

NEOPRENE COATED NYLON FABRIC 650 GM 50 gm sqr mtr Width 101CM

Specn no. CQAE/1940/ 1613/a

D HOOK

Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3

Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3

D-Ring Upper for Folding Bailer (Radius- 51 mm)

D-Ring Upper for Folding Bailer (Radius- 51 mm)

D-Ring Lower for Folding Bailer (Radius-76 mm

Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing

Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing

Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing

Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing

Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing

FLOOR BOARD (FRP) IN 3 PARTS

IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006

IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006

LIFTING PLANK

IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

Neoprene Rubber mould with shore hardness 60+-5

Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3

Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3

GRATING

IMPD - 0410/A and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD - 0410/A and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

BOW END PLANK

IMPD – 0408 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD – 0408 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

BUTTON PRESS CLOTH TO CLOTH

IS : 9721 and IMPD -0413/B

IMPD -0413/B

AIR VALVE FOR RECEE BOAT

IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437)

IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437)

OBM BRACKET ASSEMBLY IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006

IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006

IMPD-0409/B

FOLDING OARS/ PADDLES

IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006

IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006

KEEL IN 3 PIECES

IMSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A) and As per Clause 5.6 and 5.7 of Specn No. CQAE/1940/ 1520(b):2006

MSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A)

TOGGLE WOOD Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

TOGGLE WOOD Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

Webbing Nylon 44 mm OG

Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:- 1. Count of yarn- 840 denier high tenacity nylon yarn. 2. width- 44 mm +- 1.5 mm 3. thickness - 1.1 mm (min) to 2.0 mm (max) 4.breaking strength - 1815 Kgs (min)

RUBBER TUBE 14 MM INNER DIA 19 MM. OUTER DIA

SPECN-IS:637

SPECN-IS:637

SPECN-IS:5676 NEOPRENE C-4.BS:2752

SPECN-IS:5676 NEOPRENE C-4.BS:2752

SPECN-NO:-IND/GS/468

SPECN-NO:-IND/GS/468

SPECN.NO:-IMPD-2050

SPECN.NO:-IMPD-2050

SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET)

SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET)

SPECN. 65 MM X 20MM CHIR WOOD WELL FINISHED and FREE FROM KNOTSAND CRACKS TREATED WITH COPPER NAPTHANATE SOLUTION and PAINTED OG

SPECN. 65 MM X 20MM CHIR WOOD WELL FINISHED and FREE FROM KNOTSAND CRACKS TREATED WITH COPPER NAPTHANATE SOLUTION and PAINTED OG

SPECIFICATION NO. IS : 536-1968

SPECIFICATION NO. IS : 536-1968

BEST TRADE QUALITY

BEST TRADE QUALITY

SPECN-IS:6488,WIDTH-38 MM+-2.0 MM,WEIGHT MIN.62 GM/METER BREAKING STRENGTH-MIN 3020 N ON FULL WIDTH X 20 CM STRIP.

SPECN-IS:6488,WIDTH-38 MM+-2.0 MM,WEIGHT MIN.62 GM/METER BREAKING STRENGTH-MIN 3020 N ON FULL WIDTH X 20 CM STRIP.

IMPD 2050

IMPD 2050

BEST TRADE QUALITY

BEST TRADE QUALITY

IS 723

IS 723

ADHESIVE TYPE -A

SPECIFICATION NO: IND/ENG/PROV/1193/d-2004

• As Per Specification/Drawing

• As Per Specification/Drawing

SPECN-CQAE/1940/ 1494/2000 & CONNECTED DRGS.

SPECN-CQAE/1940/ 1494/2000 & CONNECTED DRGS.

SPECN-CQAE/1940/ 1494/2000 & CONNECTED DRGS.

SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)

SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)

SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)

SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON

SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON

MANUFACTURED FROM HIGH TENACITY NYLONIN OLIVE/DARK GREEN AND SHALL CONFORM TO IS:4227

MANUFACTURED FROM HIGH TENACITY NYLONIN OLIVE/DARK GREEN AND SHALL CONFORM TO IS:4227

SPCEN :- IS:4084-1978 (Ist Rev) (amdt.NO.2)-REAFFIRMED 2007 AND SUPP. SCHL. NO.CQA(GS)/SS/335. CAT.NO. 5325-000169

SPCEN :- IS:4084-1978 (Ist Rev) (amdt.NO.2)-REAFFIRMED 2007 AND SUPP. SCHL. NO.CQA(GS)/SS/335. CAT.NO. 5325-000169

SPECN-IMPD-0411

SPECN-IMPD-0411

IMPD-0411

SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES. 1-COUNT OF YARN-210 DENIER, HIGH TENACITY. 2-WIDTH-25 MM +-1MM. 3-THICKNESS-0.5 MM TO 0.8 MM. 4-WEIGHT MAX-1120 GMS/100 METERS. 5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS

SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES. 1-COUNT OF YARN-210 DENIER, HIGH TENACITY. 2-WIDTH-25 MM +-1MM. 3-THICKNESS-0.5 MM TO 0.8 MM. 4-WEIGHT MAX-1120 GMS/100 METERS. 5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS

LOCK OCK WITH BUCKLE

ADRDE/1354.

• As per Specification/Drawing

• As per Specification/Drawing

AS PER SPECIFICATION

ADRDE/SPECN/1992/35.

AS PER SPECIFICATION

SPECN-ADRDE/QMS/TDTM/C-2010/04

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1985/25

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/35

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36 (TYPE-I)

AS PER SPECIFICATION

ADRDE/SPECN/1992/36(TYPE-IV)

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36(TYPE-II)

AS PER SPECIFICATION

SPECN-IS:1402 Except that - plaits/30 - 260+- 10

AS PER SPECIFICATION

SPECN-ADRDE/SPECN/1992/36 TYPE-V

AS PER SPECIFICATION

Specification No. : IS : 5175-1992.

AS PER SPECIFICATION

SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE

SPECIFICATION NO: IND/ENG/PROV/1222.

SPECIFICATION NO: IND/ENG/PROV/1222.

CORD NYLON BRAIDED UNDYED 345 N CORELESS

SPECN.NO.: ADRDE/SPECN/1987/31. appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. Sampling plan and criteria of conformity. As per anexure 11 (TC-8).

• As Per Specification/Drawing

• As Per Specification/Drawing

AS PER SPECIFICATION

SPECN. NO. ADRDE/QAC/TECH PART/05/01

AS PER SPECIFICATION

SPECN-IS:4227(VARIETY NO.-11_)

AS PER SPECIFICATION

SPECIFICATION NO.: IS :4227-1981 VARIETY NO 4(b)

AS PER SPECIFICATION

IN ROLL LENGTH OF 100 MTS. SPECIFICATION:IS:4227-1967

AS PER SPECIFICATION

SPECIFICATION JSS:4020-9(1984)

AS PER SPECIFICATION

SPECIFICATION:- NO.OF SPINDLE----36 NO.OF ENDS-------36 NO.OF CORE------- 8 WT./100 MTR------1100 GM (APPROX) NO.OF PLAITS/dm--50 TEX OF YARN:-SHEATH- 90.9X2 -CORE -100.9X3 BS.---------450 KG ELONGATION % ---30 (APPROX) CONSTRUCTION----BRAIDED

AS PER SPECIFICATION

SPECIFICATION :- NO.OF SPINDLES----------------16 NO. OF ENDS-------------------16 NO.OF PLAITS/dm------------36/37 WEIGHT/Mtr.----------------8.5 gms.(MAX). TEX OF YARN----------------93.4 X 4 B.S. IN NEWTON-------------3600-N (MIN).