Name
Code
Quantity
Approx Value
Select
Fabrication of BAG INNER PTAM
Description
Fabrication of BAG INNER PTAM
Specification
As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1143(e)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025036
1400
Number
Fabrication of BAG INNER HAP
Description
Fabrication of BAG INNER HAP
Specification
As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1283-A-4(b)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025033
1150
Number
WEBBING NYLON 44 MM 1815 KG NAVY BLUE
Description
WEBBING NYLON 44 MM 1815 KG NAVY BLUE
Specification
IS 4727: 1968 Except For:-
Parameters Specified (Existing) Specified (Revised)
Page 4, Picks/dm: 70 Picks/dm:140+/- 5%
Table 1, (2 picks/shed)
Vty. No. 2
No of folds in No of folds in
welf yarn-2 welf yarn- 1
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101877322
1821
Metre
QUICK RELEASE LOCK TP WITH BUCKLE
Description
QUICK RELEASE LOCK TP WITH BUCKLES
Specification
DRG.NO.-ADRDE/PAS/2007/16.
Drawing no.
DRG.NO.-ADRDE/PAS/2007/16.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110019011
509
Number
Tape Nylon 2point6 cm OG BS 1200 Kg
Description
Tape Nylon 2.6 cm OG BS : 1200 Kg
Specification
Specification - ADRDE/SPECN/66
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101797030
10292
Metre
MBEU 7074 PA HARDSHELL CONTAINER FOR JAGUAR PILOT PARA
Description
MBEU/7074 PA -- HARDSHELL CONTAINER FOR JAGUAR PILOT PARA.
Specification
DRG. NO. ADRDE/1454-00(b)
Drawing no.
DRG. NO. ADRDE/1454-00(b)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110075026
78
Number
COTTON FABRIC FOR SD PARA 91point4 CM
Description
COTTON FABRIC FOR S.D. PARA 91.4 CM (+.6) SCORD
Specification
COTTON FABRIC FOR S.D. PARACHUTE type II of IS:2970-1987 Reffirmed 2004 There shall be no presence of starch in appearance workmanship and finish and other respects not denined in the specification the material shall conform to the sealed pattern held in the custody of CQAT&C Kanpur. The bolt length/Roll length 40.00 Mtr. or above.
2.PACKING AND MARKING : As per relevant clause of specn.
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101462435
1643
Metre
ASSEMBLY CONNECTING LUG
Description
ASSEMBLY CONNECTING LUG
Specification
Drawing No. ADRDE/1339(b)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110075042
196
Number
COIL SPRING BP SU 30
Description
COIL SPRING (BP SU-30)
Specification
ADRDE/1402-03-002(a)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110025030
1369
Number
Tape Nylon Tubular Braided 20 mm BS 5680N BS
Description
Tape Nylon Tubular, Braided, 20 mm BS 5680N BS
Specification
ADRDE/QMS/TGTE/T/2019/08 Date: 24.06.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101787005
3751
Metre
Tape Nylon Tubular Braided 20 mm BS 5680N BS
Description
Tape Nylon Tubular, Braided, 20 mm BS 5680N BS
Specification
ADRDE/QMS/TGTE/T/2019/08 Date: 24.06.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101787005
3751
Metre
MALE CONNECTOR
Description
MALE CONNECTOR
Specification
ADRDE/PAS/2008/24(a)
Drawing no.
ADRDE/PAS/2008/24(a)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2010071033
316
Number
COTTON PADDING 2 THICK 135 CM WIDTH
Description
COTTON PADDING 2" THICK 135 CM WIDTH
Specification
SPECN-APPROVED QUALITY
Testing / Inspection Facility
2101126417
705
Metre
QUICK RELEASE UNIT
Description
QUICK RELEASE UNIT
Specification
SPECN.NO.: ADRDE/1369(a) DRD/26/98.
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110071022
431
Number
METAL COMPONENT SPRING
Description
METAL COMPONENT SPRING
Specification
1.6.01-01-02-02
Drawing no.
1.6.01-01-02-02
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110080001
592
Number
COMBINATION HARNESS THROUGH TRADE ASSISTANCE FOR STITCHING ONLY
Description
COMBINATION HARNESS THROUGH TRADE ASSISTANCE FOR STITCHING ONLY
Specification
SPECN-DMSRD&E/T&DS/93/410(B)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
9911036867
5158
Number
Tape Nylon 15 mm BS 185 KG UD
Description
Tape Nylon 15 mm BS 185 KG U/D
Specification
The Tape shall be in continuous length of 110 M (Excluding Sampling) Without Any Flag Otherwise That Roll Be Treated As Short Length.
ADRDE/QMS/TGTE/T/2019/02 Date: 10/05/2019
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221372
87811
Metre
ALUMINIUM KEEL IN 3 INTERLOCKING SECTION COMPLETE WITH LOCKING PLATE AND FASTENERS
Description
ALUMINIUM KEEL IN 3 INTERLOCKING SECTION COMPLETE WITH LOCKING PLATE & FASTENERS
Specification
ALUMINIUM as per IS 737, Marine Grade Locking Plate, Keel Hook and Nut & Bolt SS 316 Grade As per NCD 4006 Issu-3 Mar 2014
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
9911037677
22
Set
QUICK RELEASE CONNECTOR FOR PILOT PARA JAGUAR A C
Description
QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)
Specification
SPCN.NO.AS PER ADRDE/1455
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110075020
92
Number
Fabric cotton grey mercerized 95 117 gsm
Description
Fabric cotton grey mercerized, 95- 117 gsm.
Specification
ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that:
(i) “The roll length is specified as minimum 100 mtr.”
(ii) Fabric width 94 cm.
Drawing no.
ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101222001
1318
Metre
MOULDED PLATE TYPE 1
Description
MOULDED PLATE TYPE-1
Specification
DRG. NO.:ADRDE/1309(a) DRD/42/98
Testing / Inspection Facility
2110071012
81
Number
Tape Nylon 2point54 cm 1 0 UD BS 250 Kg
Description
Tape Nylon 2.54 cm + 1 – 0 U/D BS: 250 Kg
Specification
ADRDE/Specn/64(a)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101786989
24365
Metre
FABRICATION OF DANGER BUILDING COAT WHITE THROUGH TRADE
Description
FABRICATION OF DANGER BUILDING COAT WHITE THROUGH TRADE
Specification
SPECN-AS PER TECHNICAL PARTICULARS ENCLOSED
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
9911036848
800
Number
FABRICATION OF DANGER BUILDING TROUSERS WHITE THROUGH TRADE
Description
FABRICATION OF DANGER BUILDING TROUSERS WHITE THROUGH TRADE
Specification
SPECN-AS PER TECHNICAL PARTICULARS ENCLOSED
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
9911036849
800
Number
NIV PACK FRAME
Description
NIV PACK FRAME
Specification
DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110008014
378
Number
HOUSING WITH FERRULE AND RUBBER SLEEVE FOR PP MIRAG 2000 SEA HARRIER AC
Description
HOUSING WITH FERRULE & RUBBER SLEEVE FOR P.P. MIRAG 2000/SEA HARRIER A/C
Specification
SPECN-ADRDE/1357(a)
Drawing no.
SPECN-ADRDE/1357(a)
Testing / Inspection Facility
2110077018
19
Number
Sub Assy of Spring for Auxiliary Spring PTAR Parachute
Description
Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute
Specification
CQA(GS)/US/563
Testing / Inspection Facility
2110080016
272
Number
BALL TYPE SPRING PSM SERIES
Description
BALL TYPE SPRING(PSM SERIES)
Specification
ADRDE/1332(b)
Manufacturing Technology
AS PER DRAWING/SPECIFICATION
Testing / Inspection Facility
AS PER DRAWING/SPECIFICATION
2101787006
208
Number
CORDAGE POLYESTER HEAT SET BS 364 KG WITH RED THREAD
Description
CORDAGE POLYESTER HEAT SET BS:364 KG WITH RED THREAD
Specification
ADRDE/SPECN/74(a)
Testing / Inspection Facility
2101126391
1000
Metre
CORDAGE POLYESTER HEAT SET BS 318KG
Description
CORDAGE POLYESTER HEAT SET BS:318KG
Specification
ADRDE/SPECN/74(a)
Testing / Inspection Facility
2101126358
1225
Metre
LOCK OCK WITH BUCKLE
Description
LOCK OCK WITH BUCKLE
Specification
ADRDE/1354.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110069032
112
Number
SET HARNESS TYPE SDM 4 12 M THROUGH TRADE ASSISTANCE
Description
SET HARNESS TYPE SDM 4.12 M THROUGH TRADE ASSISTANCE
Specification
SPECN-IND/TC/2550(b)
Testing / Inspection Facility
9911036859
11451
Number
SET HARNESS TYPE SDM 6 10 M THROUGH TRADE ASSISTANCE
Description
SET HARNESS TYPE SDM 6.10 M THROUGH TRADE ASSISTANCE
Specification
SPECN-IND/TC/2550(b)
Testing / Inspection Facility
9911036858
20000
Number
FABRICATION OF PONCHO GLACIER
Description
FABRICATION OF PONCHO GLACIER
Specification
As per Drawing/ Technical particulars enclosed
Manufacturing Technology
As per Drawing/ Technical particulars enclosed
Testing / Inspection Facility
As per Drawing/ Technical particulars enclosed
9911037521
17911
Number
SWIVEL CONE WITH PLATE
Description
SWIVEL CONE WITH PLATE
Specification
DRG.NO.:ADRDE/1321(b) DRD/60/98.
Manufacturing Technology
As Per Drawing/Specification enclosed
Testing / Inspection Facility
As Per Drawing/Specification enclosed
2110071013
92
Number
CONNECTING LUG OF AUXILIARY PARACHUTE
Description
CONNECTING LUG OF AUXILIARY PARACHUTE
Specification
DRG.NO.:ADRDE/1301 (a) DRD/43/98.
Manufacturing Technology
As Per Drawing/Specification enclosed
Testing / Inspection Facility
As Per Drawing/Specification enclosed
2110071008
261
Number
ADJUSTABLE BUCKLE
Description
ADJUSTABLE BUCKLE
Specification
DRG.NO.:ADRDE/1304 (a) DRD/46/98.
Drawing no.
DRG.NO.:ADRDE/1304 (a) DRD/46/98.
Manufacturing Technology
As Per Drawing/Specification enclosed
Testing / Inspection Facility
As Per Drawing/Specification enclosed
2110071004
166
Number
NYLON RIP CORD WITH PIN
Description
NYLON RIP CORD WITH PIN
Specification
SPECIFICATION NO :ADRDE/309(a)
Manufacturing Technology
As Per Drawing/Specification enclosed
Testing / Inspection Facility
As Per Drawing/Specification enclosed
2110060016
137
Number
PADDLE WOODEN BOAT
Description
PADDLE (WOODEN) BOAT
Specification
As per Drg. No. IMPD-1424. The timber species used to manufacture paddles are Chaplash, Deodar, Kathal, Aini, Gamari, Teak, Padauk, Kail and Champak as per IS: 1325 and IS: 399. The paddles shall govern the Preservation/Painting workmanship QA & Testing as per Appendix 'H' of Specn No. CQAE/1940/1548/g.
Testing / Inspection Facility
9911035963
90
Number
CROSS CONNECTOR STRAP SAFETY PIN
Description
CROSS CONNECTOR STRAP SAFETY PIN
Specification
DRG.NO.ADRDE/1390
Drawing no.
DRG.NO.ADRDE/1390
Testing / Inspection Facility
2110019020
248
Number
FLOOR BOARD ASSEMBLIES COMPLETE WITH INTERLOCKING AND SIDE LOCKING STRINGER
Description
FLOOR BOARD ASSEMBLIES COMPLETE WITH INTERLOCKING & SIDE LOCKING STRINGER
Specification
(I) ALLUMINIMUM FLOOR BOARD(3 PIECES) - IS 737 MARINE GRADE 1 SET
(II) SIDE STRINGER - ALLUMINUM - 4 NOS
(III) CHANNEL Z SECTION- ALLUMINUM - 6 NOS
(IV) CHANNEL H SECTION- ALLUMINUM - 3 NOS
(V) CHANNEL A SECTION- ALLUMINUM - 3 NOS
As per NCD 4006 Issue- 3 Mar 2014
Testing / Inspection Facility
9911037676
10
Set
TRANSOM MADE OF MARINE PLYWOOD
Description
TRANSOM MADE OF MARINE PLYWOOD (18.0 MM & 12.0 MM)
Specification
As per NCD 4006 Issue-3 March 2014 Clause 5.12 & encapsulated in FRP reinforcement complete with keel Retaining Block, Floor Support Wood & Aluminum Plate for OBM Mounting (300 CSM + 9 mm Marine Ply + 300 CSM + 18 mm Marine Ply + 300 CSM)
Testing / Inspection Facility
9911037667
10
Set
THREAD SEWING NYLON 66 Bonded BS 4point5 Kgf Navy Blue
Description
THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue
Specification
Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD
Testing / Inspection Facility
2103784268
1636
Kilometer(km)
RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar
Description
RUBBER BAND, 13MM Width,150 MM Circumference for BP Jaguar
Specification
ADRDE/540-A-5(a) and ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018 with ADRDE Agra letter No. ADRDE/QMS/TG(TE)/24 dated 30/09/2019.
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2103679554
36151
Number
WEBBING NYLON 44 MM UD 17800N
Description
WEBBING NYLON 44 MM U/D 17800N
Specification
IS:4727-1968 except for :-
i) Parameters Specification
Page 4, Table picks/dm:140+- 5%
1, Vty. No. 2 No of folds in weft
yarn- 1
iii) Sampling Plan & Criteria of conformity shall be as per CQAT&C/QAI NO. CQAT&C/QAI/TC-8/7(b).
iv) In appearance, workmanship,
finish & all other respects not
defined in this IS Specn. the
material shall conform to the
sealed pattern held in the custody
of the Controller, CQAT&C,
KANPUR.
V) Packing & Marking: As per
schedule No. CIT&C/PMS/41
Testing / Inspection Facility
2101876974
72950
Metre
FEMALE COUPLING FOR CWL
Description
FEMALE COUPLING FOR CWL
Specification
DRG. NO. ADRDE/1344(b)
Drawing no.
DRG. NO. ADRDE/1344(b)
Testing / Inspection Facility
2110075039
56
Number
CORD ELASTIC SHOCK ABSORBAR 10 MM DIA
Description
CORD ELASTIC SHOCK ABSORBAR 10 MM DIA
Specification
SPECN. NO.CIADE/16 (a)
Testing / Inspection Facility
2101119910
222
Metre
WEBBING NYLON 44 MM OG 1815 KG
Description
WEBBING NYLON 44 MM O.G. 1815 KG.
Specification
IS : 4727-2020 V. No. 2 with Amendment No. 1 August 2022 Except that : – Shade should be as per approved sample held with QCM/OPF.
Testing / Inspection Facility
2101877081
10855.60
Metre
BUCKLE STEEL 48 MM BLACK EPOXI PAINTED
Description
BUCKLE STEEL 48 MM BLACK EPOXI PAINTED
Specification
SPCNS: PLATE-7 OF DRG. ATTACHED WITH SPECN. NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039013
21479
Number
BUCKLE STEEL 38 MM BLACK EPOXI PAINTED
Description
BUCKLE STEEL 38 MM BLACK EPOXI PAINTED
Specification
PLATE NO. 8 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039014
11675
Number
BUCKLE PLASTIC 48 MM BLACK
Description
BUCKLE PLASTIC 48 MM BLACK
Specification
SPECIFICATION: PLATE NO. 6 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039017
21627
Number
BUCKLE PLASTIC QUICK RELEASE 40 MM BLACK
Description
BUCKLE PLASTIC QUICK RELEASE 40 MM BLACK
Specification
SPCNS. NO. DMSRDE/T&GS/93/406
Testing / Inspection Facility
2110039016
5399
Number
NIV TRIANGULAR D RING
Description
NIV TRIANGULAR D RING
Specification
DRAWING NO. CQA(GS)/US/560
Testing / Inspection Facility
2010020005
4692
Number
FABRICATION OF SOCKS BLACK
Description
FABRICATION OF SOCKS BLACK.
Specification
i. FABRICATION OF SOCKS BLACK.
ii. THE FABRICATION INCLUDES KNITTING, LINKING, WASHING, PRESSING AND PASSING OPERATION.
iii. FABRICATION OF SOCKS BLACK WILL BE STRICTLY AS PER SPECN AIR HQ/DQAS/AK-037, DS CAT NO 8440-000467 TO 473.
Testing / Inspection Facility
9911035785
54300
Pair
FABRIC NYLON POLYURETHENE COATED 105 GM WHITE WIDTH 100 CM DS Cat No 8305 003 728
Description
FABRIC NYLON POLYURETHENE COATED 105 GM WHITE WIDTH 100 CM ( DS Cat No. 8305-003 728 )
Specification
SPECN NO.: JSS:8305-32:2003
Testing / Inspection Facility
2101221248
10337
Metre
BUCKLE PLASTIC BLACK 38 MM
Description
BUCKLE PLASTIC BLACK 38 MM
Specification
SPCNS: PLATE NO-6 OF DRG. ATTACHED WITH DMSRDE SPECN. NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039015
16070
Number
A 4 8115 000264 ECAD BOX CARGO AERIAL DELIVERY CORRUGATED CARD BOARD SIZE 380 MM X 380 MM X 455 MM
Description
A-4/8115-000264 ECAD BOX CARGO AERIAL DELIVERY CORRUGATED CARD BOARD SIZE 380 MM X 380 MM X 455 MM
Specification
SPECIFICATION NO. - IND/GS/1537(g)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
1469010221
16411
Number
COIL SPRING I CODE 2110025024
Specification
DRNG. NO.ADRDE/1402-03-002
Drawing no.
DRNG. NO.ADRDE/1402-03-002
Testing / Inspection Facility
2110025024
736
Number
QUICK RELEASE LINK PAE BAG
Description
QUICK RELEASE LINK. (PAE BAG)
Specification
SPCN.NO.ROV.DRG.NO.ADRDE/113(b)
Testing / Inspection Facility
2110018011
148
Number
THIMBLE
Description
SPECIFICATION: ADRDE/1394(a)
Specification
SPECIFICATION: ADRDE/1394(a)
Manufacturing Technology
SPECIFICATION: ADRDE/1394(a)
Testing / Inspection Facility
SPECIFICATION: ADRDE/1394(a)
2110057005
107
Number
SUSPENSION LUG
Description
SUSPENSION LUG
Specification
PROV.DRG. NO.ADRDE/114(c)
Testing / Inspection Facility
9911025377
444
Number
TAPE TEXTILE NYLON 43 MM UD BS 9000 N
Description
TAPE TEXTILE NYLON 43 MM UD BS 9000 N
Specification
SPECIFICATION NO. ADRDE/SPECN/1985/27(b). Except that :- Twist (TPM) yarn as per clause No. 4.1 only ROLL LENGTH 55 MTR. EXCLUDING SAMPLING
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101786843
40135
Metre
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Description
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
Testing / Inspection Facility
2101779720
10968
Kilometer(km)
NETTING POLYESTER ROUND MESH UNDYED 132 CMS
Description
NETTING POLYESTER ROUND MESH UNDYED 132 CMS.
Specification
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction : 40%
width direction : 92.5 to 100%
Testing / Inspection Facility
2101533177
890
Metre
FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.
Description
FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.
Specification
SPECIFICATION NO. : ADRDE/SPECN/1982/7(c)
sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.
Testing / Inspection Facility
2101221592
5216
Metre
SNAP FASTNER (4 PIECES) SPRING TYPE SIZE-7/7 WITH ONE PLASTIC WASHER
Description
SPECN-IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
Specification
IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
Testing / Inspection Facility
2111654009
198017
Number
TAPE NYLON 20 MM UNDYED (BS=1350 KG) MINIMUM
Description
SPECIFICATION NO. : ADRDE/SPECN/82.
Specification
SPECIFICATION NO. : ADRDE/SPECN/82.
Testing / Inspection Facility
2101776059
304120
Metre
DUCK NYLON FABRIC BLACK 230 GM
Description
DUCK NYLON FABRIC BLACK 230 GM
Specification
ADRDE/SPECN/1984/23(a) EXCEPT THE COLOUR WILL BE BLACK INSTEAD OF OG
Testing / Inspection Facility
2101138893
153
Metre
Main Buoyancy Fabric as per ISO 15372 2000 Class Type Approved
Description
Main Buoyancy Fabric as per ISO 15372:2000 (Class Type Approved)
Specification
Hyplon (Outer Grey) coated neoprene (Inner Black) rubber fabric; Min. 1600 Dtex, 1500 GSM, Color RAL 7040, Width 1.5 m
Testing / Inspection Facility
9911037662
220
Metre
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Description
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
Testing / Inspection Facility
2101779720
10968
Kilometer(km)
SHOULDER BUCKLE UPPER
Description
SHOULDER BUCKLE (UPPER)
Specification
DRG. NO.:ADRDE/1302 (a) DRD/44/98.
Drawing no.
DRG. NO.:ADRDE/1302 (a) DRD/44/98.
Testing / Inspection Facility
2110071006
280
Number
CORD COTTON BS 40 KG U D
Description
CORD COTTON BS 40 KG UD
Specification
SPECN-ADRDE/SPECN/1992/36(TYPE-II)
Testing / Inspection Facility
2101126379
4862
Metre
FABRIC NYLON 190 GSM UNDYED
Description
FABRIC NYLON, 190 GSM, UNDYED
Specification
ADRDE/QMS/TGTE/F/2019/03 Dated 16/05/2019
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101222002
86
Metre
EYELET ALUMINIUM ALLOY CHEMICALLY PASSIVATED WITH WASHER NO 21
Description
EYELET ALUMINIUM ALLOY CHEMICALLY PASSIVATED WITH WASHER NO.21
Specification
SPECN- EYELET ALUMINIUM ALLOY WITH WASHER NO.21 CONFIRMING TO IS:4084-78 WITH amdt. NO.1 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/335
Testing / Inspection Facility
2111601048
94123
Set
SNAP FASTNER 04 PIECES
Description
SNAP FASTNER 04 PIECES
Specification
IS : 4741-1968
Testing / Inspection Facility
2101626844
1144
Number
FABRIC COTTON MERCERISED 140 GM U D 136 4 CM
Description
FABRIC MERCERISED 140 GM U/D 136+4 CM.
Specification
SPECN. NO. IS:514.GRADE -1.
Testing / Inspection Facility
2101221983
1010
Metre