Spcn :-1. WEIGHT PER SQR.MTR.(IN GRMS)=115 gm.
2. WIDTH IN CM – 94
3. AIR POROSITY(Cub.Ft/Sqr.Ft./Sec.) - 25 TO 30.
4. BREAKING STRENGTH(In Kg)-50 Min. BOTH DIRECTION.
5. THICKNESS IN MM 0.25 (Max).
6. NUMBER OF THREAD/CM - 21/22 IN ONE DIRECTION. - 23/24 ON OTHER DIRECTION
7. TEX. OF YARN - 9.8 X 2 WARP - 9.4 X 2 WEFT
8. FINISHED GRAY MERCERISED
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction | 40% width direction 92.5 to 100%
AS PER PARTICULAR =WIDTH=94 CM
A.P.35+_5 Cuft/Sqft/Sec at 10"WHP
Weight/Sq.Metre=115-117 Gram
Thread /cm-Warp-28,WEft-25
Tex of Yarn
Tex x Fold-Warp-9.4x2,Weft-9.5x2
B.S.in Kg-Warp-53kg(min)
Weft-53kg(min.)
Weave-Plain
Finish-Grey Merecerised
FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH
Specification
SPECIFICATION NO. IS:4726-1984.
EXCEPT THAT:-
i) page 4, clause 2.2.1, third line has been deleted from IS.
ii) page 7, table 1, note 2 has been amended as given
FOR:- 210 g/sq.cm
READ:- 200 g/sq.cm
FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH
Specification
SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2
Read-200 g/cm2
FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification
Specification
Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other
respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur.
(b) Sampling Plan as per Annexure I attached.
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101626840
298291
Number
2245
OPF/ADVANCE VR/EOI/JANUARY-18/PACKING ITEM
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE, FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE, FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 15 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 15 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540,EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540,EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Specification
IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO.
CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE,
FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101626840
700000
Number
2246
OPF/ADVANCE VR/EOI/JANUARY-18/FLOAT
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
