1) Lead Tin Foil LF 0825260901
Description : Lead Tin Foil LF 0825260901()
Specification : Lead Tin Foil 57.15*34.30*0.0381 mm +/- 0.0127mm thick (Sn(TIN) 4 TO 5%, Sb (ANTIMONY) 1% MAX, Pb (LEAD) Remainder To Spec: BS/STA-7/LX-1/1
R
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK[08]()
Specification : SPECN. NO. JSS 9535-06
R
Estab
2) 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK.[08]()
Specification : SPECN. IS: 13923- 1993 (AMDT. 1) REAFFIRMED-1997
C
Nonestab
4) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977[10]()
Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991
R
Nonestab
5) 0832270092 STRIP TIN[08]()
Specification : SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.
R
Nonestab
6) 0832485001 WIRE SOLDER SN 60 PERC[08]()
Specification : BS 441.
R
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) ZINC WIRE 2 MM DIA L F NO 0840210319[08]()
Specification : ZINC WIRE 2 MM DIA.IN LINE TO LINE SPOOL 15 KG , GRADE Z 2 AS PER SPECN.BSEN 1179:2003, 99.99% PURITY.
P
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BORON POWDER GR I[10]()
Specification : BORON POWDER GR-I, PURITY MIN 95% TO SPECN NO. IND/ME/980 : 2016 DC NO. 6033-ME DTD.08/06/2017 DS CAT NO. 6810-001175 (MAKE M/S S. B. BORON. US).
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005
Description : LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005()
Specification : LEAD PIG ORDINARY (FLAT) 500 MM LONG X 100 MM WIDE X 70 MM THICK IN WEIGHT OF 30KG,Pb-99.99% TO SPECN.IS-27-1992(FOURTH REVISION)(REAFFIRMED 2014)(AMENDMENT NO1 APRIL 1998)(AMENDMENT NO2 DECEMBER 2010).
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) TIN FOIL FOR M-92[64]()
Specification : OFN/BMCS/M92/TIN FOIL
C
Nonestab
Category : dp
Grade : Grade I
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) TIN POWDER MZ 6605 1001771519
Description : TIN POWDER MZ 6605 1001771519()
Specification : TIN POWDER TO SPECN NO.MZ 66005. DT. 21/04/2007.
Specification : SOLDER ELECTRONIC GRADE WIRE 16/18/20 SWG 60/40 (TIN/LEAD) LOW MELTING MINIMUM RESISTANCE TO DRY SOLDER , AS PER SPECIFICATION IS-193-2000 (FIFTH REVISION)
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) LEAD TIN FOIL DECU 5 to 10MM WIDE x 0point04 to 0point05 MM THICK LF 0832260912
Description : LEAD TIN FOIL DECU 5 to 10MM WIDE x 0point04 to 0point05 MM THICK LF 0832260912()
Specification : LEAD TIN FOIL DECU 5 to 10mm wide,0point04 to 0point05 MM thick and not longer than 300mm to drg no. 04-13x2454-02005 to spec STA7Tx2-Sep 1945
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ANODE CADMIUM LF 1582400000[15]()
Specification : ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).
R
Nonestab
2) ANODE TIN SIZE 203 X 152 X 6 MM LF 1582720862[15]()
Specification : ANODE TIN SIZE 203 X 152 X 6 MM THICK 99.9% PURITY TO SPECN:-IS-2384-1963.(REAFFIRMED 2016)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY[18]()
Specification : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY
C
Nonestab
2) CENTERING BIT(LEAD WASHER) TO IRW-204-DET[65]()
Specification : CENTERING BIT(LEAD WASHER) TO IRW-204-DET NO.4, ARDE-1934, DC NO.35466-A.
C
Nonestab
3) LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1)[08]()
Specification : LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)
C
Nonestab
4) DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001[64]()
Specification : DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).
C
Nonestab
5) LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH[08]()
Specification : LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH TO SPECN.JSS:9535-06: 2010, REVISION NO.2,DC NO.4085-ME,DT.08.09.2010.
C
Estab
6) LEAD RING TO DRG.NO.b III 8.249.034[64]()
Specification : LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97.
C
Estab
7) LEAD WIRE SIZE:1.25 +/- 0.25MM DIA[62]()
Specification : LEAD WIRE SIZE:1.25 +/- 0.25MM DIA. TO SPECN: GOST-5655-67
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 0825290052 FOIL LEAD TIN
Description : 0825290052 FOIL LEAD TIN()
Specification : JSS 9535-06 : 2010
P
Estab
2) 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK
Description : 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK()
Specification : SPECN. NO. JSS 9535-06
P
Estab
3) 0800390677 STRIP LEAD CHEM PURP 35 MM
Description : 0800390677 STRIP LEAD CHEM PURP 35 MM()
Specification : IS: 405-1992
P
Estab
4) 0800360086 STRIP LEAD GEN PURP 35 MMW
Description : 0800360086 STRIP LEAD GEN PURP 35 MMW()
Specification : IS: 405 (PART-2) -1992 IN REEL SIZE 3 TO 10 KGS.
P
Estab
5) 0800110125 WIRE LEAD
Description : 0800110125 WIRE LEAD()
Specification : GOST 5655-67. GRADE OF LEAD TO SPECN. GOST 3778-77
P
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) LEAD SEAL 10 MM DIA IS 13923 1993 LF 1861901001
Description : LEAD SEAL 10 MM DIA IS 13923 1993 LF 1861901001()
Specification : LEAD SEAL 10 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2018)
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) FOIL TIN LEAD FOR CHARGE-9
Description : FOIL TIN LEAD FOR CHARGE-9()
Specification : DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Powder Tin[10]()
Specification : POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).
R
Nonestab
2) FOIL TIN LEAD FOR CHARGE-9[08]()
Specification : DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.
R
Nonestab
3) LEAD SEAL SIZE 1/2[08]()
Specification : LEAD SEAL SIZE 1/2" DIA TO DRG. NO. OFBA/NR/613 DTD.09.12.06
R
Nonestab
4) LEAD TUBE FOR FLSC-12[08]()
Specification : LEAD TUBE FOR FLSC-12 (GEN TOLERANCE 2102) SPECIFICATION IS:404-1993 PART-1, GRADE-1. LEAD PURITY 99.9% (MIN) DIMENSION- ID:6.5, -0.2MM, OD:13.0, -0.2 MM LENGTH OF COIL 4 METER
R
Nonestab
5) LEAD TUBE FOR FLSC-25[08]()
Specification : LEAD TUBE FOR FLSC-25 (GEN TOL 2102) SPECIFICATION : IS:404-1993, PART-1, GRADE-1. LEAD PURITY : 99.9% (MIN) DIMENSION- ID:11.0,-0.3 MM, OD:18.0.2 MM LENGHT OF COIL 4 METER.
R
Nonestab
6) LEAD TUBE FOR FLSC 10[08]()
Specification : LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/MEM911(PROV)DC 3842-ME DT. 04.04.05 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGT
1) COMPRESSOR ROTARY POWER DRIVEN 1A 220 m3 per Hr 9 point 8 kPa at 2300 rev per min to Drg No EGA 164 D Sheet I and II and other details as per Annexure A[00]()
Specification : COMPRESSOR, ROTARY POWER DRIVEN, 1A 220m3/Hr, 9.8 kPa at 2300 rev/min to CAT SECTION & CAT/PART No.63/4310-000002 and Drg.No.EGA-164/D (Sheet I & II) & other details as per Annexure Á”.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) TIN FOIL FOR M-92[64]()
Specification : OFN/BMCS/M92/TIN FOIL
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) BARRIER BAG FOR M-91 AND M-92[64]()
Specification/ Drawing No.:
OFN/ BMCS/ M-91/ M-92/BARRIER BAG
Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3
C
Nonestab
4) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676
Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676()
Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.
C
Nonestab
5) PAPER BOARD CORRUGATED LF 1411817752
Description : PAPER BOARD CORRUGATED LF 1411817752()
Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK.
C
Nonestab
6) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178
Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515
Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515()
Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011.
C
Nonestab
2) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313
Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3
C
Nonestab
4) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676
Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676()
Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.
C
Nonestab
5) PAPER BOARD CORRUGATED LF 1411817752
Description : PAPER BOARD CORRUGATED LF 1411817752()
Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK.
C
Nonestab
6) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178
Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
Specification : ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32M
R
Nonestab
15) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.[14]()
Specification : SPECN. JSS - 9310-06 : 2002
R
Nonestab
16) 1419828815 PAPER WHITE FINE[14]()
Specification : JSS 9310-06: 2002
R
Nonestab
17) 1421014629 MILL BOARD SIZE 787MM X 559MM X 6MM[14]()
Specification : JSS 9310-01:2007
R
Nonestab
18) 2103789155 POLYTHENE LAY FLAT 200 X 0.076 MM.[21]()
Specification : JSS 9330-03:2007 REVISION NO 2
R
Nonestab
19) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM[25]()
Specification : SPECN. NO. JSS 9330- 03
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2103789156 SHEET SANDWICHED TYPE CAMBRIC-POLYT[21]()
Specification : IND/ME/740 (D)
R
Nonestab
2) 1418940031 PAPER LAMINATED GR I 914 MM WIDE[14]()
Specification : IND/ME/786(D):2013
R
Estab
3) 1410018984 PAPER LAMINATED GR II 914 MM WIDE[14]()
Specification : IND/ME/786(D):2013 DC
R
Nonestab
4) 1410016984 PAPER LAMINATED GR III 914 MM WIDE[14]()
Specification : SPECN. NO. IND/ME/786
R
Estab
5) 1410016990 PAPER LAMINATED GR III 102 MM WIDE[14]()
Specification : SPECN. NO. IND/ME/786
R
Estab
6) 1410018278 PAPER LAMINATED GR III 127 MM WIDE[14]()
Specification : SPECN NO. IND/ME/786(D):2013
R
Nonestab
7) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG[14]()
Specification : JSS 9310- 03: 2010
R
Nonestab
8) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM[14]()
Specification : SPECN. NO. JSS 8135-017
R
Nonestab
9) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN[14]()
Specification : SPECN. NO. JSS-8135-05
R
Estab
10) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE[14]()
Specification : JSS:8135-09: 2004
R
Nonestab
11) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5[14]()
Specification : SPECN. NO. JSS 8135-09
R
Nonestab
12) 1418617801 CORGTD CARD BOARD SHEET A B C SIZES[14]()
Specification : CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET I HEMRL/ED/DRG NO.001 DET.NO.1 SZ-600MM X225MM X32.5MM THICK 18 NOS/SET. (B) PKG.SHEET II DET.NO.2 SZ- 590MM X235MM X42.5MM THK.18 NOS/SET.(C)PKG.SHEET III DET.NO.3 SZ- 23
Specification : ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32M
R
Nonestab
15) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.[14]()
Specification : SPECN. JSS - 9310-06 : 2002
R
Nonestab
16) 1419828815 PAPER WHITE FINE[14]()
Specification : JSS 9310-06: 2002
R
Nonestab
17) 1421014629 MILL BOARD SIZE 787MM X 559MM X 6MM[14]()
Specification : JSS 9310-01:2007
R
Nonestab
18) 2103789155 POLYTHENE LAY FLAT 200 X 0.076 MM.[21]()
Specification : JSS 9330-03:2007 REVISION NO 2
R
Nonestab
19) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM[25]()
1) TIMBER OF ANY SPICES 20X170X1000MM LF 2255541041[22]()
Specification : TIMBER OF ANY SPICES 20X170X1000MM
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.-O.F.KHAMARIA[99]()
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TIMBER M H C PLANKS 2255055300[22]()
Specification : TIMBER MANGO/HOLLOCK/CHAPLAS PLANKS KILN SEASONED & PRESSURE TREATED UNPLAND OR ANY OTHER SPECIES COVERED BY THE SPEC:- IND/ME/883 (f) (PROV) DC NO 3539-ME DT 24/10/98 SIZE 52MM X 152MM X 1.6M LONG
R
Nonestab
2) TIMBER PLANK 13 X 172MM X 2 5M LF 2255055301[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.
R
Nonestab
3) TIMBER PLANK 22 X 85MM X 2 5M LF 2255055302[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.
R
Nonestab
4) TIMBER PLANK 16 X 75MM X 2 5M LF 2255055303[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.
R
Nonestab
5) TIMBER PLANK 16 X 110MM X 2 5M LF 2255055304[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX W-131 M-3/L WOODEN ISV-162A[65]()
Specification : BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948(ak) DC-36868-A, AIDE MEMOIRE W/4
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CATCH LOCK ASSY DRG NO.IA-1053 4 CO[99]()
Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571856109 BOX M-32A(WOOD)PT NO 548A(MINEAP1B)[65]()
Specification : SPECN.NO.IA 948(AK)
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN. CONTAINER BOX M 41A (WOOD)[14]()
Specification : AMMN. CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A, DT.30.07.2007
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PACKING BOX FOR RGB 60 AS PER DRG NO H RGB 060 1 057[01]()
Specification : as per enclosure
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Box H 33 MKI IN Empty Wood[65]()
Specification : Box H-33 MKI (IN), Empty (Wood) To Drg. No. NAD 4289/2 ARD 2399 DT. 4/12/09
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOX N-18 MK-1(WOOD) TO HOLD 2 MARKER SMOKE A/S WHITE OR YELLOW [65]()
Specification : DRG.NO.NAD 4392, SHEET-1 OF 2 SHEETS
C
Nonestab
2) CASE OUTER WOOD FOR THUNDER FLASH[65]()
Specification : CASE OUTER WOOD (CASES POWDER C 124, MK I (IN) TO DRG NO NAD 4032/1
C
Nonestab
3) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]()
Specification : DRG.NO. 155-1210
C
Nonestab
4) SET OF PLYWOOD PACKING FITMENTS FOR BOX C 43 A[65]()
Specification : DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6571856109 BOX M-32A(WOOD)PT NO 548A(MINEAP1B)
Description : 6571856109 BOX M-32A(WOOD)PT NO 548A(MINEAP1B)()
1) SPARE BARREL DRG. NO. 75-2012, 75-2015 AND WOODEN PACKING BOXES FOR OTHER BARRELS ETC.
Description : SPARE BARREL DRG. NO. 75-2012, 75-2015 AND WOODEN PACKING BOXES FOR OTHER BARRELS ETC.()
Specification : AS PER DRG. NO. 75-2015
E
Estab
2) WOODEN PACKING BOXES FOR T-72 & T-90
Description : WOODEN PACKING BOXES FOR T-72 & T-90()
Specification : CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Wooden Chest for LMG[14]()
Specification : WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CHEST FOR 9 MM CARBINE[14]()
Specification : AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN CHEST MG2B FOR MAG[70]()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN CHEST MG2B FOR MAG[70]()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN CHEST MG2B FOR MAG[70]()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) WOODEN CHEST MG2B FOR MAG[70]()
Specification : DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
C
Nonestab
2) PACKAGING WOODEN BOX FOR REVOLVER PRAHAAR[14]()
1) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) CORD NYLON BRAIDED UNDYED 345 N CORELESS[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody of
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 26 MM MEDIUM U D BS 700 KG[2101796701]()
Specification : ADRDE/
SPECN/65
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 20 MM UNDYED (BS=1350 KG) MINIMUM[2101776059]()
3) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968 Type -1 Except that :-
1) 180 picks/dm +/- 5% (2 picks/shed)
2) No. of folds in weft yarn-1
R
Nonestab
4) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controlle
R
Nonestab
5) Fabrication of SD Para Pack Cover[2110025032]()
Specification : Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3
R
Nonestab
6) FABRICATION OF SUPPLY DROP PARACHUTE[2110025031]()
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
2) POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050[70]()
Specification : POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
C
Nonestab
3) Grip Pistol Assembly as per drawing No 27P 6500[70]()
Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1
C
Nonestab
4) Guard Hand Left Right Assembly Polymers[11]()
Specification : Guard Hand Left Right Assembly Polymers
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BACK PLATE (NYLON) TO DRG. No. 33P 3015[70]()
Specification : AS PER DRG OF BACK PLATE (NYLON) TO DRG. No. 33P 3015
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.TAR-RB-K-1026
E
Nonestab
2) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
3) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
4) PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR[70]()
Specification : PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
5) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Nonestab
6) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
7) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
8) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
9) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
10) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1407
International Plastics Ingenieure
279, East Mohan Nagar 100 Ft. Road Amritsar Punjab
PIN1 : 143001
Phone No. : 5004940
GSTIN : 03AAAFI2733C1Z6
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
2) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
3) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
4) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
5) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
2) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
3) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
4) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
5) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
6) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
Specification : PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET[62]()
Specification : MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET TO DRG.NO:155-1000(M)(UNIT LOAD) CONSISTING OF PALLET TO DRG.NO.155-1210(M), FRAME ASSEMBLY TO DRG.NO.155- 1230(M) DCNO.37126-A,DT.25.7.07.
C
Nonestab
2) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]()
Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A DT.30.07.07.
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BOX UNIT LOAD FOR 155MM SHELL M107[14]()
Specification : IND/ME/993 & IS:303-1989
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) WOODEN CRATE ALL SIZES & (INTERNAL) 620 X 350X 350 MM()
Specification : STEEL ROD 16 MM DIA IN LENGTH OF 3 MTRS SPECN: BS-970, EN-24
C
Nonestab
2) STEEL BAR ROUND 28 DIA[90]()
Specification : RD. BAR 28 MM IN STD. LENGTH SPECN:IS-226
C
Nonestab
3) MS ANGLE IRON 50x50x6MM[90]()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
C
Nonestab
4) MS CHANNEL 75x40x40[90]()
Specification : MS CHANNEL SZ (75×40×40)MM × 4.7 MM THICK TO SPECN IS-2062/94 (RE) CR "SK" IN STREIGHT LENGTH OF 1015 MM
C
Nonestab
5) SQ TUBE 40x40[90]()
Specification : SQ TUBE 40×40×1.6 THICK SPECN IS-4923 ERW (1) 18224.00 MTRS IN LENGTH OF 2278 MM (2) 4792.00 MTRS IN LENGTH OF 2396 MM (3) 3275.00 MTRS IN LENGTH OF 5000 MM OVERALL TOLERANCE IN LENGTH (+) NIL (-) 2 MM
C
Nonestab
6) MS SHEET 2 MM THICK[90]()
Specification : MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020
C
Nonestab
7) MS PLATE 10 X 1000 OR 1250 X 4500 MM[90]()
Specification : MS PLATE 10MM THICK × 1250/1500 × 5000 MM SPECN IS:2062 GR A/B
C
Nonestab
8) MS PLATE 12 MM IS 2062[90]()
Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"
R
Nonestab
9) MS PLATE 16 MM IS 2062 GR B[90]()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
C
Nonestab
10) MS PLATE 25 MM THICK[90]()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
C
Nonestab
11) HR SHEET 4 MM X 1250 X 2500[90]()
Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)
C
Nonestab
12) HR SHEET 3 POINT15 MM X 1250 X 2500[90]()
Specification : HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"
C
Nonestab
13) STEEL ROD 45 MM DIA X 150 MM LENGTH[90]()
Specification : STEEL ROD 45 MM DIA×150MM LENGTH. SPECIFICATION EN-9 BS:970.
C
Nonestab
14) MS PLATE 6 X 1250 X 4500 OR 5000 MM[90]()
Specification : MS PLATE 6MM×1250×5000/6300 MM SPECN-IS:2062 GR "B"
C
Nonestab
15) CR SHEET[90]()
Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
C
Nonestab
16) FLAT 40 X 25 IN STD LENGT[90]()
Specification : FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992
C
Nonestab
17) MS PLATE 8 X 1400 OR 1500 X 4500 MM[90]()
Specification : MS PLATE 8 MM THICK X 1500 X 4500/5000 MM SPECN IS:2062 GR. B OR ALTERNATE IS-2062 GR. C
C
Nonestab
18) STL SHT ST V 23 1MM THICK[90]()
Specification : STL SHT ST V-23 1MM THICK
C
Nonestab
19) MS PLATE 5X1400 OR 1500X4500 OR 5000[90]()
Specification : MS PLATE 5.00 MM THICK X 1400 OR 1500 X 4500 OR 5000 MM SPECN:- IS: 2062 GR. A/B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
1) C R G M STRIP FOR AK47 KF25 ITEM CODE 0710160157[90]()
Specification : C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO
R
Estab
2) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METE
R
Estab
3) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX
R
Estab
4) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATE
R
Estab
5) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-
R
Estab
6) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
R
Estab
Category :
Grade : Grade III
Size :
L
1418
PREM NARAIN GUPTA & Co. (SOLE SELLING AGENT OF M/s SIDDHI PACKAGING, DAMAN)
PLOT NO. C-6, OIDC INDL. ESTATE VILL RIGANWAD DIST DAMAN Andaman and Nicobar Islands
PIN1 : 396210
Phone No. : 396210
GSTIN : 25AAJFS6721R1ZI
