List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1381 NOBLETEX INDUSTRIES LIMITED
Block No. 309, N. H. - 8, Baleshwar, Palsana Surat Palsana Surat Gujarat
PIN1 : 394317
Phone No. : 9824209274
GSTIN : 24AAACN7942F1ZK 		SRTN00072C

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC NYLON KNITTED ALUMINIZED COATED 100 CM MIN[21]() Specification : Specification -IND/TC0161 As per relevant clause of specification R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]() Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN. SPECIFICATION:- JSS 8305-32-2003 R Estab
2) FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE[21]() Specification : FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE SPECIFICATION:- APPENDIX 'A' V.NO. 2, AS MENTIONED IN SPECIFICATION NO. JSS:4240-03:2011 & AS PER ANNEXURE 'A'. R Estab
3) FABRIC POLYESTER WHITE WIND CHEATER 115 GSM WIDTH 150CM MIN[21]() Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
4) OUTER AND INNER SHELL NYLON FABRIC INNER JACKET NYLON 60 GSM WIDTH 150 CM MIN PANTONE SHADE NO 19 0511 TPX[21]() Specification : OUTER AND INNER SHELL NYLON FABRIC (INNER JACKET) NYLON 60 GSM WIDTH 150 CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX SPECIFICATION :- AS PER APPENDIX 'E' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]() Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R Nonestab
Category : p
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]() Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R Nonestab
2) FABRIC NYLON 300 GSM RIP STOP PU COATED FR 152 CMS WIDE[21]() Specification : AS PER SPEC R Nonestab
3) DRILL COTTON PROOFED WHITE (BLEACHED ) 71 CM[21]() Specification : IND/TC/097 (c) R Nonestab
4) PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS[21]() Specification : AS PER APPENDIX "B" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 R Nonestab
Category : p
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC NYLON 75 GMS O.G. POLYURETHANE COATED 100 CM WIDE[21]() Specification : DMSRDE/TEX-3(P)/2001/1/(V.NO. 2) R Nonestab
2) DRILL COTTON PROOFED WHITE (BLEACHED ) 71 CM[21]() Specification : IND/TC/097 (c) R Nonestab
3) PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS[21]() Specification : AS PER APPENDIX "B" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 R Nonestab
4) FABRIC NYLON 300 GSM RIP STOP PU COATED FR 152 CMS WIDE[21]() Specification : AS PER SPEC R Nonestab
5) FABRIC NYLON 250 GSM PU COATED 120 CMS O.G[21]() Specification : as per requirement R Nonestab
6) FABRIC NYLON BLACK 250 GMS P U COATED 172 CMS WIDE.[21]() Specification : Specification No. IND/TC/0155 Except Threads/Cm (As per R Nonestab
7) NYLON FABRIC 220 GMS O.G. 100 CM WIDE WATER & OIL REPELLENT[21]() Specification : PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B) R Nonestab
8) NYLON FABRIC O.G. POLYURETHANE COATED (250 GM/SQR M)91 CM[21]() Specification : SPECN. NO. IND/TC/2314 (a) R Nonestab
Category : p
Grade : Grade III
Size : M
1382 Deep Dies & Tools
Saroop Chand Khera Near Rammanohar Lohia Law College Kanpur Road Lucknow Uttar Pradesh
PIN1 : 226012
Phone No. : 2436402
GSTIN : 09AADFD2636G1ZM 		LKND06995C

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) SAND CASTING FOR BODY LF 9927069535[99]() Specification : SAND CASTING FOR BODY TO DRG NO B-23/SC/7427436/237 M1 (LF 9927069535) C Nonestab
2) SAND CASTING FOR COMP Y6213326 LF 9927098023[99]() Specification : SAND CASTING FOR COMP Y6213326 LF 9927098023 C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)[74]() Specification : BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)[74]() Specification : ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) COVER ASSY AS PER DRG NO AL6179264 (LF 7440201645)[74]() Specification : COVER ASSY AS PER DRG NO AL6179264 (LF 7440201645) C Estab
2) CAP AS PE DRG NO AL6430468 (LF 7440201646)[74]() Specification : CAP AS PE DRG NO AL6430468 (LF 7440201646) C Estab
3) COVER DRG NO IUMK301152.001 (LF 7440201693)[74]() Specification : COVER DRG NO IUMK301152.001 (LF 7440201693) C Estab
4) COVER FOR BPV29000 TO DRG NO BPV29105 (LF 7440901417)[74]() Specification : COVER FOR BPV29000 TO DRG NO BPV29105 (LF 7440901417) C Estab
5) SETTING PIECEFOR BPV29000 TO DRG NO BPV29115 (LF 7440901421)[74]() Specification : SETTING PIECEFOR BPV29000 TO DRG NO BPV29115 (LF 7440901421) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) FLANGE TO DRG NO BL8230197 (LF 7420111054)[74]() Specification : FLANGE TO DRG NO BL8230197 (LF 7420111054) C Estab
2) WASHER TO DRG NO AL8942046 (LF 7420211067)[74]() Specification : WASHER TO DRG NO AL8942046 (LF 7420211067) C Estab
3) SCREW TO DRG NO OLF/R&D/TVNE-4B&1PA/114 WITHOUT ELECTROPLATING/COATING (LF 7420411019)[74]() Specification : SCREW TO DRG NO OLF/R&D/TVNE-4B&1PA/114 WITHOUT ELECTROPLATING/COATING (LF 7420411019) C Estab
4) FLANGE TO DRG NO OLF/R&D/BPK-2/211 M2 (LF 7432111043)[74]() Specification : FLANGE TO DRG NO OLF/R&D/BPK-2/211 M2 (LF 7432111043) C Estab
5) WASHER TO DRG NO Y-2546326-01 (LF 7432312024)[74]() Specification : WASHER TO DRG NO Y-2546326-01 (LF 7432312024) C Estab
6) MOUNT TO DRG NO AF8637806 (LF 7432412037)[74]() Specification : MOUNT TO DRG NO AF8637806 (LF 7432412037) C Estab
7) MOUNT TO DRG NO AF8638134 (LF 7432412041)[74]() Specification : MOUNT TO DRG NO AF8638134 (LF 7432412041) C Estab
8) SCREW TO DRG NO AL8914221-03 (LF 7440201880)[74]() Specification : SCREW TO DRG NO AL8914221-03 (LF 7440201880) C Estab
9) SCREW TO DRG NO AL8914221-03 FOR VISOR (LF7440202701)[74]() Specification : SCREW TO DRG NO AL8914221-03 FOR VISOR (LF7440202701) C Estab
10) SCREW TO DRG NO AU8900044 (LF 9000090897)[90]() Specification : SCREW TO DRG NO AU8900044 (LF 9000090897) C Estab
11) SPRING WASHER TO DRG NO AL8387003 (LF 9002081334)[90]() Specification : SPRING WASHER TO DRG NO AL8387003 (LF 9002081334) C Estab
12) WASHER TO DRG NO AF8942297-12 WITHOUT ELECTROPLATING/COATING (LF 9004080912)[90]() Specification : WASHER TO DRG NO AF8942297-12 WITHOUT ELECTROPLATING/COATING (LF 9004080912) C Estab
13) SCREW TO DRG NO AF8909032 WITHOUT ELECTROPLATING/COATING (LF 9004080940)[90]() Specification : SCREW TO DRG NO AF8909032 WITHOUT ELECTROPLATING/COATING (LF 9004080940) C Estab
14) WASHER TO DRG NO AF8942297 WITHOUT ELECTROPLATING/COATING (LF 9004081345)[90]() Specification : WASHER TO DRG NO AF8942297 WITHOUT ELECTROPLATING/COATING (LF 9004081345) C Estab
15) SCREW TO DRG NO Y-7501394 (LF 9023091154)[90]() Specification : SCREW TO DRG NO Y-7501394 (LF 9023091154) C Estab
16) WASHER TO DRG NO AF8942297-11 WITHOUT ELECTROPLATING/COATING (LF 9927062441)[99]() Specification : WASHER TO DRG NO AF8942297-11 WITHOUT ELECTROPLATING/COATING (LF 9927062441) C Estab
17) EXPANSION WASHER TO DRG NO B7546110 (LF 9927088797)[99]() Specification : EXPANSION WASHER TO DRG NO B7546110 (LF 9927088797) C Estab
18) WASHER TO DRG NO Y-7641738 (LF 9927090232)[99]() Specification : WASHER TO DRG NO Y-7641738 (LF 9927090232) C Estab
19) WASHER TO DRG NO Y-7642819 (LF 9927090235)[99]() Specification : WASHER TO DRG NO Y-7642819 (LF 9927090235) C Estab
20) FLANGE TO DRG NO BSH8230121 (LF 9927090404)[99]() Specification : FLANGE TO DRG NO BSH8230121 (LF 9927090404) C Estab
21) SCREW TO DRG NO AF8914130-02 (LF 9927091244)[99]() Specification : SCREW TO DRG NO AF8914130-02 (LF 9927091244) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914)[74]() Specification : LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914) C Estab
2) LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915)[74]() Specification : LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915) C Estab
3) BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927)[74]() Specification : BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927) C Estab
4) COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928)[74]() Specification : COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930)[74]() Specification : BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930) C Estab
2) COVER AS PER DRG NO 71940300021 (LF 7440205936)[74]() Specification : COVER AS PER DRG NO 71940300021 (LF 7440205936) C Estab
3) COVER AS PER DRG NO 71940300031 (LF 7440205937)[74]() Specification : COVER AS PER DRG NO 71940300031 (LF 7440205937) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)[74]() Specification : BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415) C Estab
2) COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)[74]() Specification : COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416) C Estab
3) GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)[74]() Specification : GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259) C Estab
4) COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)[74]() Specification : COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418) C Estab
5) GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)[74]() Specification : GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419) C Estab
6) LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)[74]() Specification : LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420) C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)[74]() Specification : GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259) C Estab
2) GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)[74]() Specification : GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419) C Estab
3) BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)[74]() Specification : BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415) C Estab
4) COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)[74]() Specification : COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416) C Estab
5) COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)[74]() Specification : COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418) C Estab
6) LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)[74]() Specification : LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420) C Estab
7) DISK LF NO 7440200277[74]() Specification : DISK LF NO 7440200277 C Estab
8) SLEEVE LF NO 7440200283[74]() Specification : SLEEVE LF NO 7440200283 C Estab
9) CASING LF NO 7440200285[74]() Specification : CASING LF NO 7440200285 C Estab
10) CASING LF NO 7440200286[74]() Specification : CASING LF NO 7440200286 C Estab
11) BODY LF NO 7440206201[74]() Specification : BODY LF NO 7440206201 C Estab
12) COVER LF NO 7440206202[74]() Specification : COVER LF NO 7440206202 C Estab
Category : p
Grade : Grade II
Size : S
1383 PORWAL AUTO COMPONENTS LTD
PLOT NO 209 , 215, SECTOR-1 INDUSTRIAL AREA PITHAMPUR Madhya Pradesh
PIN1 : 454775
Phone No. : 403608
GSTIN : 23AABCP0411E1ZB 		BPLPOO991E

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) INTERNAL DISC TO DRG NO 765 16 4 AS PER ANNEXURE A ITEM CODE 4215990724[42]() Specification : INTERNAL DISC TO DRG.NO.765-16-4 AS PER ANNEXURE -"A" C Nonestab
2) EXTERNAL DISC TO DRG NO 765 16 8 AS PER ANNEXURE A ITEM CODE 4215990725[42]() Specification : EXTERNAL DISC TO DRG.NO.765.16.8 AS PER ANNEXURE "A" C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) Bearing Housing Blank ITEM CODE 6120100268[61]() Specification : Bearing Housing Blank DRG.No- 30522978(New DRG. NoGCF/50/39491 As per Annexure B C Nonestab
2) Bracket Item Code 6120100269[61]() Specification : Bracket DRG. No. 2025460 (New DRG.no- GCF/50/39490 As per Annexure C C Nonestab
3) Bracket Item Code 6120100270[61]() Specification : Bracket DRG.No.- 2025651 (New Drg. no.- GCF/50/39467) As per annexure D C Nonestab
4) Cradle Item Code 6120100271[61]() Specification : Cradle DRG. No.- 188.94.082, As per annexure E C Nonestab
5) Bearing Housing Blank Item code 6120100272[61]() Specification : As per Annexure A C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CAST STEEL EMPTY BODY MACHINED AS PER ANNEXURE A ITEM CODE 4215990739[42]() Specification : CAST STEEL EMPTY BODY (MACHINED) AS PER ANNEXURE-A AND AS PER DRG. NO.OFM 33056 C Nonestab
Category :
Grade : Grade III
Size : M
1384 ANANT AUTOMATS PVT. LTD.
G-20, SITE- III PANKI INDUSTRIAL ESTATE KANPUR U.P.
PIN1 : 208022
Phone No. : 0512-692058 		ABQPJ8061P

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET BOTTOM PLATE 5320 000945 FOR MAG Description : RIVET BOTTOM PLATE 5320 000945 FOR MAG() Specification : RIVET BOTTOM PLATE DS CAT NO. 5320 - 000945 PT.NO.2025Z DC(I) NO. 27286-SA DT- 14.02.21 IN FINISHED CONDITION C Estab
Category : ddp
Grade : 3
Size : S
1385 Dynaspede Integrated Systems Pvt. Ltd
136-A, SIPCOT Industrial Complex, HOSUR HOSUR Tamil Nadu
PIN1 : 635126
Phone No. : 401181
GSTIN : 33AAACD7414N1ZN 		CHED04382A

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
2) DUMMY-LRCR & MRCR[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 105 MM MRIR EMPTY[61]() Specification : DRG. NO. NASK DRG.NO.989 C Nonestab
2) 105 MM LRIR EMPTY[61]() Specification : DRG.NO. NASK 987 DT.20.04 .15 C Nonestab
3) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
4) 105MM LONG RANGE CHAFF ROCKETS (LRCR)[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
5) DUMMY-LRCR & MRCR[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
2) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
2) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) END PIN ASSEMBLY FOR MRCR ROCKET[60]() Specification : DRG. NO.NAI (P) SK-123 (PROV.) DT. 22.01.2008 C Nonestab
2) CONNECTING SLEEVE MRCR ROCKET[60]() Specification : DRG. NO. NAI (P) SK - 125 (PROV,)DATED 04.03.2010 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
2) DUMMY-LRCR & MRCR[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) LONG RANGE CHAFF ROCKETS (LRCR)[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
2) 105 MM MRIR EMPTY[6178500210]() Specification : DRG. NO. NASK DRG.NO.989 C Nonestab
3) 105 MM LRIR EMPTY[61]() Specification : DRG.NO. NASK 987 DT.20.04 .15 C Nonestab
4) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
5) DUMMY-LRCR & MRCR[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : S
1386 Patodia Forgings and Gears Limited
Gat No:150/2, Mahalunge, Chakan-Talegaon Road, Pune Chakan-Talegaon Road PUNE Maharashtra
PIN1 : 410501
Phone No. : 9325249301
GSTIN : 27AAECP9266C1Z9 		PNEP13369G

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) SRCR (EMPTY BODY)[60]() Specification : DRG NO. NASK 828/1.( PROV ) DT.27.7.2000 R Nonestab
2) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV)[61]() Specification : DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011 R Nonestab
3) 105 MM MRIR EMPTY[61]() Specification : DRG. NO. NASK DRG.NO.989 C Nonestab
4) 105 MM LRIR EMPTY[61]() Specification : DRG.NO. NASK 987 DT.20.04 .15 C Nonestab
5) SRCR - DUMMY[61]() Specification : DRG.NO. NASK/974 (PROV) (ASSEMBLED) C Nonestab
6) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
7) 105MM LONG RANGE CHAFF ROCKETS (LRCR)[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
8) DUMMY-LRCR & MRCR[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) SRCR (EMPTY BODY)[60]() Specification : DRG NO. NASK 828/1.( PROV ) DT.27.7.2000 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG REPRESENTING FUZE FOR 40MM LOW[60]() Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]() Specification : CQA (A) 2316 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY PROJECTILE[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]() Specification : CQA(A)- 2322 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]() Specification : CQA(A)- 2322 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ammunition Factory Khadki
Name Specification Use Status
1) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05[60]() Specification : DRG.NO.AFK/SK-215-05. dt. 13.09.2011 C Nonestab
Category :
Grade : Grade III
Size : M
1387 M/s MINMAT FERRO ALLOYS (P) LTD
1 AJC BOSE ROAD, 4TH FLOOR AJC BOSE ROAD KOLKATA West Bengal
PIN1 : 700020
Phone No. : 22825663
GSTIN : 19AACCM0610M1ZK 		CALM05200G

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)[04]() Specification : FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM) R Estab
2) FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIF[04]() Specification : FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY W R Nonestab
3) FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,][04]() Specification : FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,] R Estab
4) FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE SUPPLYING MA[04]() Specification : FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE R Nonestab
5) FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% M[04]() Specification : FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVE R Estab
6) FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%Max,Over size[04]() Specification : FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%M R Nonestab
Category : P
Grade : II
Size :
1388 SHREE GAJANAN ENGINEERING
S block ,Pl no-SP 109,Opp Color Bond , Indrayani Nagar , MIDC , Bhosari Indrayani Nagar Pune Maharashtra
PIN1 : 411026
Phone No. : 27124626
GSTIN : 27AECPJ7323M1ZB 		AECPJ7323M

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DELAY ELEMENT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12 C Nonestab
2) SECURING NUT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.13 C Nonestab
3) PROPELLANT CUP FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A C Nonestab
4) PROPELLANT CUP CLOSURE FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.18 C Nonestab
5) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
Category :
Grade : Grade III
Size : M
1389 M.M Ceramics and Fero Alloys
Navkar Complex , 5th Floor, Opposite Andheri Court , Andheri East, Mumbai 400069 Andheri Court Lane Mumbai Maharashtra
PIN1 : 400069
Phone No. : 67875232
GSTIN : 27AAHFM2170J1Z7 		AAHFM2170J

Download 		1) Ordnance Factory Dehu Road
Name Specification Use Status
1) MAGNESIUM POWDER TYPE III, GRANULATION NO. 15, 100 TO 200 MESH[10]() Specification : MIL-M-382-C( AR) R Nonestab
2) Magnesium Powder Gr.B medium density, Apparent density : 0.65 to 0.85g/ml ,retained on 72 BSS/ 212 M[10]() Specification : IS-2307-2004 R Nonestab
3) MAGNESIUM POWDER GR. IX[10]() Specification : IS-2307-2004 (SECOND REV.) R Nonestab
4) Magnesium Powder Grade IV low density, Apparent density : 0.40 to 0.60 g/ml ,retained on 72 BSS/ 212[10]() Specification : IS-2307-2004 R Nonestab
Category :
Grade : Grade III
Size : L
1390 VARIETY TIMBER MART
73 A SANT SAVTA MARG MUSTAFA BAZAR BYCULLA EAST SANTSAVTA MARG MUMBAI Maharashtra
PIN1 : 400010
Phone No. : 23725285
GSTIN : 27AAAFV3079L1ZR 		ASAPM8753C

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) TIMBER OF ANY SPICES 20X170X1000MM LF 2255541041[22]() Specification : TIMBER OF ANY SPICES 20X170X1000MM R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2270463342 PLY WOOD 6 MM[22]() Specification : IS-303 - 1989 R Nonestab
2) 2270441354 PLY WOOD 3 MM[22]() Specification : IS:303-1989 R Nonestab
3) 2270463030 PLY WOOD 4 MM[22]() Specification : IS:303 -1989 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2270528358 PLY WOOD 8 MM[22]() Specification : IS: 303-1989 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2270353012 PLY WOOD 3 MM BWR BB[22]() Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY R Nonestab
2) 2270460637 PLY WOOD 12 MM MR AA[22]() Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2270528353 PLYWOOD TYPE GRADE MR AB TO SPECN IS 303 1989 RA 2018 SIZE2400MM 1200MM 08MM THICK 5 PLY[22]() Specification : PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY) C Nonestab
2) 2270403355 PLYWOOD 6 MM THICK SIZE 2400 MM 1200 MM GRADE BWR APPEARANCE CLASS[22]() Specification : PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY C Nonestab
3) 2270441355 PLYWOOD 3 MM THICK SIZE 2400 MM 1200 MM GRADE MR APPEARANCE[22]() Specification : PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2270403354 PLY WOOD 6 MMX 2.40M X1.20M BWR/AB[22]() Specification : SPECN. IS: 303 -1989 (THIRD REVISION) (AMENDMENT NO. 2) R Nonestab
Category :
Grade : Grade III
Size : S
1391 ALLIANZ TRANS ALLOY PVT LTD
B- 279 A 1st stage PEENYA 7th cross bangalore Karnataka
PIN1 : 560058
Phone No. : 9742335402
GSTIN : 29AAFCA7732D1ZQ 		AAFCA7732D

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003[90]() Specification : PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003 C Nonestab
Category :
Grade : Grade III
Size : S
1392 Sandhar components behrampur (a unit of sandhar technologies Ltd)
Corp office , sec 44, plot 13 ,Gurugram Haryana Plot 13 , sec 44, Gurugram Gurugram Haryana
PIN1 : 122002
Phone No. : 4518976
GSTIN : 06AAACS0512J2ZR 		DLSE19876D

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) REELS CABLE STEEL 406.5 MM FLANGE DIA TO IR, ISM3973 INSIDE TRAVERSE 127.00 MM OD CORE (CAT NO. Y-3/IYC-0819) REF. NO. IRES/M/3973 (METRIC GAUGE REF. NO. ILE (G) – 4 METRIC RS/PROV. 1986-3 (A) (M) (WITHOUT SIX HOLES)[70]() Specification : OCF SK-593 C. R Estab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) NOTCHED CLOSE COIL[60]() Specification : NOTCHED CLOSE COIL (AFK/DEV-12) R Nonestab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) NOTCHED CLOSE COIL[60]() Specification : NOTCHED CLOSE COIL (AFK/DEV-12) R Nonestab
Category :
Grade : Grade III
Size : L
1393 M/S JAIN UDYOG
KANHAI ROAD, SECTOR-39,VPO JHARSA,JHARSA,Village/Town:- JHARSA, City:- GURUGRAM,GURUGRAM,HARYANA -122001 KANHAI ROAD GURGAON Haryana
PIN1 : 122001
Phone No. : 9990007858
GSTIN : 06AACFJ3733H1ZL 		AACFJ3733H

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) REELS CABLE STEEL 406.5 MM FLANGE DIA TO IR, ISM3973 INSIDE TRAVERSE 127.00 MM OD CORE (CAT NO. Y-3/IYC-0819) REF. NO. IRES/M/3973 (METRIC GAUGE REF. NO. ILE (G) – 4 METRIC RS/PROV. 1986-3 (A) (M) (WITHOUT SIX HOLES)[70]() Specification : OCF SK-593 C. R Estab
Category :
Grade : Grade III
Size : S
1394 ANEYA FOUNDRIES PVT. LTD.
36-40, Anjali Udhyog Bhavan, Navghar, Vasai Road (E) VASAI Maharashtra
PIN1 : 401210
Phone No. : 6630200
GSTIN : 27AAMCA0135D1Z4 		PNEA18470E

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003[90]() Specification : PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003 C Nonestab
Category :
Grade : Grade III
Size : S
1395 INTERNATIONAL INDUSTRIAL SPRINGS
No. A 26 Road No. 10 WAGLE INDUSTRIAL ESTATE THANE Maharashtra
PIN1 : 400604
Phone No. : 6847000
GSTIN : 27AAAFI0815P1ZA 		27AAAFI08P

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SPRING EXTRACTOR TO DRG No 29P 0019STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle C Nonestab
2) SPRING MAIN TO DRG No 29P 0015 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle C Nonestab
3) SPRING SCREW BAND INNER TO DRG NO 29P 0061STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle C Nonestab
4) SPRING LEAF BED BACK SIGHT TO DRG NO 29P 0008 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle C Nonestab
5) SCREW SPRING BAND BACK SIGHT TO DRG NO 29P 0009 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle C Nonestab
6) WASHER SPRING BAND INNER TO DRG NO 29P 0067STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle C Nonestab
7) WASHER SPRING BOLT LOCKING TO DRG NO 29P 0068STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO. 29P 0068* required for 0.315" Sporting Rifle C Nonestab
8) BOLT STOCK WITH WASHERS AS ONE SET CONSISTING BOLT STOCK TO DR NO 29P 0043STAR SP 43 10 NOS WASHER BOLT STOCK TO DRG NO 29P 0066 SP 66 11 NOS WASHER SPRING BOLT STOCK TO DRG NO 29P 0069 SP69 11 NOS required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG C Nonestab
9) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG C Nonestab
10) Manufacturing and Supply of Spring Hammer Trigger as per DRG No K 2063 FOR TAR[70]() Specification : Manufacturing and Supply of Spring Hammer Trigger as per DRG No K 2063 FOR TAR C Nonestab
11) MANUFACTURING AND SUPPLY OF SPRING EXTRACTOR AS PER DRG No K 2013 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : AS PER DRG No. K- 2013* C Nonestab
12) Rod Assembly Driving Spring of M2HB Gun[74]() Specification : Rod Assembly, Driving Spring, OOW50BMG as per Drawing No. 5564305 of M2HB Gun C Nonestab
13) Spring Helical Compression OOW50BMG as per Drawing No 7313068 of M2HB Gun[74]() Specification : Spring, Helical Compression, OOW50BMG as per Drawing No. 7313068 of M2HB Gun C Nonestab
14) Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun[74]() Specification : Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun C Nonestab
15) SPRING FLAT[74]() Specification : SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
16) SCREW SPRING INTERFACE[74]() Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
17) MANUFACTURING AND SUPPLY OF SET OF 11 TYPES OF SPRINGS OF TAR AS PER DRG No K2032 K2066 K2063 K1208 K1034 K2024 K4005 K4013 K1112 K2068 K2013[70]() Specification : MANUFACTURING AND SUPPLY OF SET OF 11 TYPES OF SPRINGS OF TAR AS PER DRG No K2032 K2066 K2063 K1208 K1034 K2024 K4005 K4013 K1112 K2068 K2013 C Nonestab
18) ADAPTOR SPRING[74]() Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG C Nonestab
19) PLUG SPRING[74]() Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) COIL SPRING (FOR TAIL UNIT)[2101069002]() Specification : SPECN NO.ADRDE/1159-A-1/SA-8-5 R Nonestab
2) COIL SPRING (I.CODE 6055)[2110036055]() Specification : SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11 R Nonestab
3) COIL SPRING RTU.[2110050007]() Specification : DRAWING NO. : ADRDE/1041A-1/SA-1 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BALL TYPE SPRING[2110068033]() Specification : DRG./SPECN.NO.ADRDE/1332-G(a) DRD/71/98 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) COIL SPRING WITH CONE B P MIRAGE[2110060004]() Specification : DRAWING NO:ADRDE/305(b). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) ASSEMBLY COIL SPRING[2110019025]() Specification : Drg. No. 1.3.01-02-01(b) except Mn% as per BS: 1408-M:1954 i.e. 0.25-0.75% R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) COIL SPRING I CODE 2110025024[2110025024]() Specification : DRNG. NO.ADRDE/1402-03-002 R Nonestab
2) Sub Assy of Spring for Auxiliary Spring PTAR Parachute[2110080016]() Specification : CQA(GS)/US/563 R Nonestab
3) SNAP FASTNER (4 PIECES) SPRING TYPE SIZE-7/7 WITH ONE PLASTIC WASHER[2111654009]() Specification : IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality R Nonestab
4) BALL TYPE SPRING PSM SERIES[2101787006]() Specification : ADRDE/1332(b) R Nonestab
5) METAL COMPONENT SPRING[2110080001]() Specification : SPECN-ADRDE/1.6.01.01.02-02 R Nonestab
6) COIL SPRING BP SU 30[2110025030]() Specification : ADRDE/1402-03-002(a) R Nonestab
7) MODIFIED COIL SPRING for BP Mig 21[2110005017]() Specification : ADRDE/271(c) NOTE – FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
8) EJECTOR SPRING[2110075037]() Specification : ADRDE/1197-A3/SA-2(c) R Nonestab
9) Coil Spring for BP Hawk[2110025029]() Specification : 1.3.03-01-01(b) R Nonestab
10) Coil Spring BP SU30[2110025072]() Specification : ADRDE/1402-03-002 (a) Except that:- (i) Wire Dia=3.4+-0.1 mm (ii) Permanent set upto 3 mm. (iii) Length of coil spring= 360 +-8 mm. R Nonestab
11) Conical Spring Dia 220 M[2110025051]() Specification : MISC/RP/ADC-150/CSS/01 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297 Description : SHUTTER SPRING TBRL LF NO 9911358297() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 R Nonestab
Category : p
Grade : 3
Size : S
1396 Panna Marketing (P) Ltd., (Sole Selling Agent of M/s Bhawani Structures, Kanpur)
66,Uptron Estate Panki Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 0000000000
GSTIN : 09AERPG2973H1Z2 		AERPG2973H

Download 		1) Ordnance Equipment Factory

Debarred
Name Specification Use Status
1) BUCKLE SERRATED (ALUMINIUM FOR BELT WAIST OF SYNTHETIC WEB EQUIPMENT[21]() Specification : AS PER DRG NO SK-853,854 (FOR ALUMINIUM ALLOY SHEET 1.5 R Nonestab
Category : s
Grade : Grade III
Size : S
1) Ordnance Equipment Factory

Debarred
Name Specification Use Status
1) BUCKLE SERRATED (ALUMINIUM FOR BELT WAIST OF SYNTHETIC WEB EQUIPMENT[21]() Specification : AS PER DRG NO SK-853,854 (FOR ALUMINIUM ALLOY SHEET 1.5 R Nonestab
2) PIN CARBON STEEL SMALL - AF[21]() Specification : IND/GS/1630 (5836/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
3) PIN TENT ANGLE IRON MED. MK-2[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
4) PIN TENT ANGLE IRON MED.MK-2 - AF[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
5) PIN TENT CARBON STEEL SMALL 8340-000508[21]() Specification : IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED R Nonestab
6) BUCKLE BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS[21]() Specification : APRQ R Nonestab
7) BUCKLE BRASS 25MM W.E.[21]() Specification : SPECN. NO. IND/GS/1541 (5627/PK) R Nonestab
8) BUCKLE IRON VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
9) WASHERS COPPER VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
10) HAMMERS VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
11) STEEL SQUARES VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
12) "CHIMNEY SEGMENT OR ELBOW[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
13) TWISTED PINS[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
14) FOUR WAY MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
15) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
16) ROOF POLE WITH THREE WAY JOINT (FOR TENT EXTENDABLE)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
Category : s
Grade : Grade III
Size : S
1) Ordnance Equipment Factory

Debarred
Name Specification Use Status
1) PIN CARBON STEEL SMALL - AF[21]() Specification : IND/GS/1630 (5836/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
2) PIN TENT ANGLE IRON MED. MK-2[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
3) PIN TENT ANGLE IRON MED.MK-2 - AF[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
4) PIN TENT CARBON STEEL SMALL 8340-000508[21]() Specification : IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED R Nonestab
5) BUCKLE IRON VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
6) WASHERS COPPER VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
7) HAMMERS VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
8) STEEL SQUARES VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
9) "CHIMNEY SEGMENT OR ELBOW[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
10) TWISTED PINS[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
11) FOUR WAY MILD STEEL JOINT[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
12) ROOF POLE WITH THREE WAY JOINT (FOR TENT EXTENDABLE)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
13) CLIP END STRAP BRASS 25MM[21]() Specification : IND/GS/1541 (5627/PK DT. 21.9.1990) R Nonestab
14) HINGE COMPLETE ASSEMBLED WITH LINK AS PER DRG. NO. SE 113 DET 16 & 17 FOR CARRIER 6 A/L[21]() Specification : DRG. SHEET 3/11 OF 6573/B/PK R Nonestab
15) BOLTS & NUTS STEEL VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
16) DEES STEEL 38MMX32MMX4MM[21]() Specification : SPECN.NO. CQA(GS)/US/426(a) EXCEPT SIZE (5757/PK),EXCEPT R Nonestab
17) WASHER COPPER HOSE TINNED 3.5MM I/D X 10 MM O/D[21]() Specification : IND/GS/36(A) R Nonestab
18) WASHER COPPER HOSE TINNED 5.5MM I/D X 14 MM O/D[21]() Specification : IND/GS/36(a) R Nonestab
19) BUCKLE BRASS R.S. 1-1/4"(32MM)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
20) BUCKLE BRASS 25MM W.E.[21]() Specification : SPECN. NO. IND/GS/1541 (5627/PK) R Nonestab
21) RIVET ALUM. ALLOY SNAP HEAD SIZE VARIOUS[21]() Specification : IS:2907-1964 AND IS:740-1977 DESIG/GRADE-53000 R Nonestab
22) ALUMINIUM FRAME COMPLETE PURE EPOXY POWDER COATED BIACK TO MINIMUM 50 MICRON (0.05MM)FITTED WITH STRAPS RETAINERS (EYE)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
Category : s
Grade : Grade III
Size : S
1397 KANMECH PRIVATE LIMITED
GAT NO. 486, MEDANKARWADI, PO CHAKAN, PUNE NASHIK HIGHWAY PUNE Maharashtra
PIN1 : 410501
Phone No. : 9579125603
GSTIN : 27AABCH0399D1ZQ 		PNEH00795E

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6584113807 LAMINATED PAPER CONT 120FSAPDS MKII[65]() Specification : LAMINATED PAPER CONTAINER FOR 120MM FSAPDS MK-II TO ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018) C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6584113920 LAMINATED PAPER CONTAINER FOR 120MM HESH DRG NO 1006 05 15 00 00 000 44TA[65]() Specification : LAMINATED PAPER CONTAINER FOR 120MM HESH.DRG NO.:1006 05 15 00 00 000 44TA. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria
Name Specification Use Status
1) Steel package of 125mm FSAPDS Pract LF 9911358718[99]() Specification : Steel package of 125mm FSAPDS Pract ammunition as per QAP No. DRDO-ARDE-DOA-SPA-QAP-009-2016 date Sept 2019 C Nonestab
2) STEEL PACKAGE FOR PGB 500 L F 9911358763[99]() Specification : STEEL PACKAGE FOR PGB 500 AS PER DRG.NO. 2004 00 01 01 03 000 00 DA E Nonestab
Category :
Grade : Grade III
Size : M
1398 PACIFIC HARISH INDUSTRIES LIMITED
19, PACIFIC HARISH HOUSE PARSI PANCHYAT ROAD, ANDHERI EAST MUMBAIm Maharashtra
PIN1 : 400069
Phone No. : 66490251
GSTIN : 24AABCP7264P1ZX 		MUMP10711B

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) POLYESTER WADDING HOLLOW SILCONIZED 350 GSM IN 91 CM[21]() Specification : AS PER APPENDIX "A" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 R Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) THERMAL BONDED BATTING POLYESTER 100 GSM 150 CM WIDTH[21]() Specification : AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11 R Nonestab
Category : dp
Grade : Grade II
Size : L
1399 Makarjyothi Polymers Pvt Ltd
PLOT NO 127,SECTOR 7,PCNTDA,MIDC BHOSARI BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 27130701
GSTIN : 27AAJCM2316D1ZS 		PNEM21940C

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 TYPE B SIZE 914.4 MM WIDE X 8 MM THICK[10]() Specification : IND/ME/645 R Nonestab
2) DISC RUBBER 3.2 mm + - 0.2 mm THICK X 73 mm DIA VULCANISED NATURAL RUBBER CLASS "A" SPECN IND/ME/584[21]() Specification : IND/ME/584 C Nonestab
3) RING TO DRG NO ARDE 1933 DET NO 6 PART NO. ITV-172 SPECN CQA(A) 2322[60]() Specification : CQA(A) 2322 C Nonestab
4) BULLET RUBBER FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK 1746 SHEET NO.4 AND AS PER SPECN. NO. DGOF 135[60]() Specification : DGOF 135 C Nonestab
5) RUBBER RING TO DRG NO ARDE/2165 DETAIL 5 DT.28-9-92, SPECN. ARDE/SPECN/423[60]() Specification : ARDE/SPECN/423 C Nonestab
6) RUBBER SLUGS FOR CARTG 12 BORE ANTIRIOT TO DRG NO AFK/SK-2675 SHEET NO.1[60]() Specification : DRG NO AFK/SK-2675 SHEET NO.1 C Nonestab
7) SEALING RING TO DRG. NO. ARDE/1508 DET 7 DT 3-11-77. SPECN. ARDE/SPECN/221[60]() Specification : ARDE/SPECN/221 C Nonestab
8) RUBBER RING DRG.NO. NAI (P) SK 8501 (Prov ) [60]() Specification : DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015 R Nonestab
9) SLEEVES DESIGN REF FD 2724 PT NO.QX 655, SPECN. CQA(A) 0518[64]() Specification : CQA(A) 0518 C Nonestab
Category : p
Grade : Grade II
Size : S
1400 Chien Hsing Tannery
Zone - 5, Plot - 424,Kolkata Leather Complex, 24 Parganas (South) Zone - 5 Kolkata West Bengal
PIN1 : 743502
Phone No. : 24431711
GSTIN : 19AAEFC7201R1Z3 		CALC05764D

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) soft plain leather thickness 1+0.2mm[21]() Specification : as per requirement R Nonestab
2) chrome tanned black buff din apollo leather embassed full grain leather, thickness 2+0.2mm[21]() Specification : as per requirement R Nonestab
Category : p
Grade : Grade III
Size : S