Specification : PAINT SYNTHETIC ENAMEL BLACK. ASIAN APCOLITE/BERGER LUXOL/J&N BROLAC MAKE ONLY ACCEPTABLE
R
Nonestab
3) PAINT RMADB SGF MIDDLE BUFF ISC 359[10]()
Specification : IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
R
Nonestab
4) PAINT RFU FINI AMN ADMFB OLIV GREEN[10]()
Specification : IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
R
Nonestab
5) PAINT RM MKG STEN BLACK AMMN[10]()
Specification : IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
6) PAINT RM AMMN ADSGFS WHITE[10]()
Specification : IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT
Specification : PAINT GOLDEN YELLOW, PREMIER GLOSS ENAMEL (NA) MAKE ASIAN PAINTS/DUCO/NEROLAC ONLY. TO BE SUPPLIED IN 1 OR 4 LTR. CANS.
R
Nonestab
10) DOVE GREY COLOUR FOR ROCKET RGB-60[10]()
Specification : DOVE GREY COLOUR POLY EURATHENE PAINT CHEMTHANE - 3300 BASE WITH ITS COMPONENTS VIZ. HARDNER & THINNER FOR ROCKET RGB-60
R
Nonestab
11) PAINT SYN.ENAMEL RED SIGNAL IS 2932[10]()
Specification : IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
R
Nonestab
12) PAINT RM BRUSH MATT BLACK.IS-168-73[10]()
Specification : IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.
R
Nonestab
13) PAINT SYN.ENAMEL LIGHT GREY[10]()
Specification : IS 168 : 1993
R
Nonestab
14) PAINT OLIVE GREEN GLOSSY FINISH.[10]()
Specification : IS - 2932 - 1993 WITH AMMENDMENT NO.1 CONFORMING TO COLOUR CODE IS-5-1994 SHADE NO. 278
R
Nonestab
15) PAINT RFU MARKING GOLDEN YELLOW[10]()
Specification : IS:138-1981(AS APPLIACABLE FOR DEFENCE USE) AND CLAUES MENTI ONED IN ATTACHED SCHEDULE MUST FOLLOWED AS PER CQA(ME) LET.N O.CQA/ME/7209/UPS DT. 16/2/89 AND CQA/ME/7209/UPS/2 24/10/90
R
Nonestab
16) PAINT PFU BLACK AMMN AD BRSHNG MAT[10]()
Specification : IS 168-1993(3rd REVISION)
R
Nonestab
17) PAINT PFU FINISHING AM AIR DRYING M[10]()
Specification : IS S 1000
R
Nonestab
18) PAINT RM RED OXIDE ZINC CHROME.[10]()
Specification : JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME
R
Nonestab
19) PAINT RMAD ISC NO 499 SERVICE BROWN[10]()
Specification : IS: 168-1973
R
Nonestab
20) PAINT RFUADMF RED SIGNAL[10]()
Specification : SPECN IS:168-1993 (3RD REV.) (AS APPLICABLE FOR DEFENCE USE) WITH ADDL.CLAUSES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209 /UPS DATED 16-02-89 & CQA/ME/7209/UPS/2 DT. 24/10/90
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
3) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
2) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
3) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
4) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
1) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
2) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED[21]()
Specification : As per requirement & specification
R
Nonestab
Category : p
Grade : Grade III
Size :
L
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Estab
2) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED[21]()
Specification : As per requirement & specification
R
Estab
3) LEATHER BUFF CD 5,6 SWG[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
4) LEATHER BUFF CD 7,8 SWG[21]()
Specification : IS:580-1973
R
Estab
5) LEATHER BUFF CD 9,10 SWG[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
6) LEATHER BUFF CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
7) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
8) Leather Chrome Tanned Sides Black Plain Smooth Finished 1.4 to 1.6 mm thick[21]()
Specification : IS:578 (1985) (except CR% to be min. 4%)
Specification : AS PER DRAWING 62C 6023 250 G3 CATCH FRICTION COVER FEED CASTING DRG 6P11 6 23
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PISTON TO DRG.No. TEND-1865*2[70]()
Specification : AS PER PISTON TO DRG.No. TEND-1865*2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF HOLDER IN FULLY FINISHED CONDITION TO DRG NO C2026 DS CAT NO 1005 5650452 THROUGH CASTING ROUTE WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
1) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PISTON TO DRG.No. TEND-1865*2[70]()
Specification : AS PER PISTON TO DRG.No. TEND-1865*2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 14 POINT 5 MM MAGAZINE ASSY TO DRG NO 44P 16000ST 2 WITH FIRMS MATERIAL[70]()
Specification : 14 POINT 5 MM MAGAZINE ASSY TO DRG NO 44P 16000ST 2 WITH FIRMS MATERIAL
C
Nonestab
2) 20mm MAGAZINE ASSY TO DRG NO 44P 10000ST2 WITH FIRMS MATERIAL[70]()
Specification : 20mm MAGAZINE ASSY TO DRG NO 44P 10000ST2 WITH FIRMS MATERIAL
C
Nonestab
3) 14 POINT 5MM BOLT BODY TO DRG NO 44P 14010 ST 2 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE[70]()
Specification : 14 POINT 5MM BOLT BODY TO DRG NO 44P 14010 ST 2 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO THE DRAWING NO TEND 2718 REQUIRED FOR 30MM PIN FIRING C3019 WITHOUT HEAT TREATMENT WITH OFT RAW MATERIAL 36MM DIA[70]()
Specification : MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO THE DRAWING NO TEND 2718 REQUIRED FOR 30MM PIN FIRING C3019 WITHOUT HEAT TREATMENT WITH OFT RAW MATERIAL 36MM DIA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112366 VALVE REGULATING DRG NO IAN 123A[90]()
Specification : 90639112366 VALVE REGULATING DRG NO IAN 123A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) DISTANCE TUBE TO DRG NO F 1301 047281 D IN FC WITHOUT SURFACE TREATMENT[62]()
