List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1701 INDUSTRIAL TRADING CORPORATION
MARSHALL HOUSE 33/1, N.S.ROAD KOLKATA West Bengal
PIN1 : 700001
Phone No. : 9062324753
GSTIN : 19AABFI4503K1ZF 		CALI03410B

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 100 0 5MM 26BG IS513 CR LF 0133090563 Description : STEEL STRIP 100 0 5MM 26BG IS513 CR LF 0133090563() Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG. R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL STRIP 100x0point5MM 26BG IS513 CR LF 0133090563 Description : STEEL STRIP 100x0point5MM 26BG IS513 CR LF 0133090563() Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG. R Nonestab
Category : s
Grade : 3
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) STEEL STRIP 1MM THICK X 90X2M LONG[01]() Specification : STEEL STRIP,1MM THICK X90X2M.L STEEL STRIP 1MM THICK +_.035X 90MM +_.15X2MTS.OR MULTIPLE OF285MM.TO SPECN.BS:1449,PT-I:1983,CS-30(SILICON KILLED)BRIGHT/COLD ROLLED ANNEALED COND. ALT.MATL.BS:1449,PT-I:1983,SEC-4CONDN'A'GRADE-CS-40(SILICON R Nonestab
2) STEEL STRIP 1.8MM +_.06 X270MM[01]() Specification : STEEL STRIP 1.8MM+_.06 X 270MM R Nonestab
3) 32MM DIA 490MM LENGTH BILLET[01]() Specification : STEEL ROD 32 MM(+0.5MM-0 MM)DIA, TO SPECN.BS:970 PT-1:1983, GD-708 M-40'T'(EN-19A). V.D.IN HR.PEELED & ANNEALED COND. (240 HV.MAX).MAINTAINED S&P COMBINED=.022%MAX.(%S-.01MAX. & %P-.015 MAX.) TO LENGTH SIZE 490 MM (-1.0 MM)FOR BARREL. AS R Nonestab
4) STEEL ROD 16MM DIA FOR PISTON GAS[03]() Specification : STEEL RD.16MM DIA,CD & LTA TO SPECN:- IS: 5517-1993, DESGN:- 42CR4MO2 LRS-63 R Nonestab
5) ST. ROUND 38MM DIA 380MM LONG[03]() Specification : STEEL ROUND 38 MM DIA IS 5517-1978.40 CSR BS -970-709-M-40 R Nonestab
6) STEEL ROD 25MM DIA+_0.3MM 442L[03]() Specification : STEEL ROD 25MM DIA.(+0.3MM-0.0MM)TO SPCN.BS970 PT-I,1983,GRD709 M-40(EN-19)IN HR.,ANNEALED & PEELED COND IN EXACT LENGTHOF 442MM(+5MM-0.0MM)EACH PIECE,STRAIGHTNES 0.3MM OVER LENGTHVACUUM DEGASSED.MATERIAL REQUIRED FOR CYLINDER GAS TO DRG. R Nonestab
7) STEEL ROD 32MM (-0.5) DIA[03]() Specification : STEEL ROD 32MM(-0.5) DIA. R Nonestab
8) STEEL SQ.36X36MM (ROUND CONER)[03]() Specification : STEEL SQUARE 36X36MM (ROUND CORNER 0.5MM MAX.)X 600MM LONG (+3MM/-0MM) HOT ROLLED TO SPECN. BS970 PT-1, 1983, GRD.709 M-40 (EN-19) PERPENDICULARITY SHOULD BE LIMITED TO 0.5MM ON EACH PARTED FACE. MATERIAL TO BE SUPPLIED IN 'T' CONDITION W R Nonestab
9) STEEL RD. 42MM DIA FOR P/EXTN[03]() Specification : STEEL RD. 42MM DIA. FOR P/EXTN R Nonestab
10) BLOCK BREECH STEEL RD. 32MM DIA[04]() Specification : STEEL RD. 32MM DIA.(+0.1-0.00) PEELED BAR IN EXACT LENGTH OF800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970. PT-I:1983,GD-835,M-15(EN-39B),VACUUM DEGASSED & ELEMENTS AL-0.04% MAX.V - 0.05% MAX.,W - 0.03% MAX. R Nonestab
11) STEEL FLAT ANNEALED COND.[10]() Specification : STEEL FLAT ANNEALED COND. R Nonestab
12) STEEL ROD 38MM.(+0.5MM - 0MM)DIA LENGTH SIZE 470[01]() Specification : STEEL ROD 38MM.(+0.5MM - 0MM)DIA. TO SPECN.JSS:9510-06,2000 (REV-3)CODE REF.'B'. OR BS:970 PT-I:1983,GD.708 M40(EN-19A)V.D.,IN HR.,PEELED & ANNEALED COND.(248-HV.MAX.). MAINTAINED TO LENGTH SIZE 470(-1.0)MM.EACH FOR BARREL(CLD.FORGED)TO D R Nonestab
Category : s
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104 Description : STEEL TAPE BAND 12 point7 X 0 point45MM ITEM CODE 0133060104() Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI R Nonestab
Category : s
Grade : 3
Size : S
1702 SRI DURGA ENGINEERING WORKS PRIVATE LIMITED
18-C, Pokharpur Lal Bangla Kanpur Uttar Pradesh
PIN1 : 208010
Phone No. : 2450302
GSTIN : 09AACCS0177M1Z1 		KNPS01937F

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) AMMUNITION RACK ASSY[90]() Specification : AMMUNITION RACK ASSY C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4[90]() Specification : BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) BRACKET TO DRG NO. ILG-1516/IWP-1976[90]() Specification : BRACKET TO DRG NO. ILG-1516/IWP-1976 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) KEY AMMUNITION TO DRG 4925 000482[90]() Specification : KEY AMMUNITION TO DRG 4925 000482 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) HAND SPIKE ASSY TO DRG NO M2 BOF 4023835[90]() Specification : HAND SPIKE ASSY TO DRG NO M2/BOF-4023835 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) AMMUNITION RACK SAFTY BELT TO DRG NO 3016775[90]() Specification : AMMUNITION RACK SAFTY BELT TO DRG NO 3016775 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) STRAP SECUREING BORE CLEANING BRUSH ROD TO DRG NO BOF 6003501 8[90]() Specification : STRAP SECUREING BORE CLEANING BRUSH ROD TO DRG NO BOF-6003501-8 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) ADAPTOR FUNNEL TO DRG NO 4933 000052[90]() Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) RING TO DRG NO 6095845[90]() Specification : RING TO DRG. NO. 6095845 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SHACKLE 4030 00093 FOR APPARATUS[90]() Specification : SHACKLE 4030-00093 FOR APPARATUS TO DRG NO DS CAT-4030-000493 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) HOOK TOWING TO PART NO BOF 4015544[90]() Specification : HOOK TOWING TO PART NO BOF 4015544 C Nonestab
2) SPACER PLATE TO DRG NO 5365 001462[90]() Specification : SPACER PLATE TO DRG NO 5365 001462 C Nonestab
3) CONNECTOR ROD END 164FG 0022[90]() Specification : CONNECTOR ROD END 164FG 0022 C Nonestab
4) BRACKET TO DRAWING NO 1147152[90]() Specification : BRACKET TO DRAWING NO.1147152 C Nonestab
5) 9081005817 HOUSING TO PART NO 5161898[90]() Specification : HOUSING TO PART NO.5161898. C Nonestab
6) BRACKET TO DRG NO BOF 6127316[90]() Specification : BRACKET TO DRG NO BOF 6127316 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9081005851 COMPLETE BATTERY BOX FOR APU COMPRISES OF PLATE AND COVER PLATE AS PER DRG NOS GCF 50 40433 AND GCF 50 40434[90]() Specification : COMPLETE BATTERY BOX FOR APU COMPRISES OF PLATE AND COVER PLATE AS PER DRG.NOS. GCF/50/40433 AND GCF/50/40434. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) LINK TO DRG NO 1015 000341[90]() Specification : LINK TO DRG. NO. 1015- 000341 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) FILTER SOLDERING TO DRG BOF 6116637[90]() Specification : FILTER SOLDERING TO DRG BOF 6116637 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) wire rope assembly for MENA[90]() Specification : as per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Strap release buckle brass Q.R. ED MKII() Specification : As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Attachment ring strap release() Specification : As per specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Clamp VFJ() Specification : As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Safety Buckle Metal to Metal() Specification : As per Specification. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) GRUMET ASSEMBLY FOR SHELL 155mm ILLG.M1A1[63]() Specification : 04-13-2452-148 C Nonestab
2) BOW SHACKLE FOR SHELL 155 MM ILLG[63]() Specification : BOW SHACKLE TO DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2440A03062 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SUPPORT DROGUE PARACHUTE FOR SHELL 155MM ILLG.[63]() Specification : DRG. NO. 2440A00006 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SUPPORT PARACHUTE (SET OF 4) FOR SHELL 155MM ILLG.[63]() Specification : DRG. NO. 2440A20012 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I CODE-8009)[2110008009]() Specification : SPECN-ADRDE/PAS/2004/01(a) R Nonestab
2) PULLY SMALL[2055100006]() Specification : Prov. Drg. NO. ADRDE/172(b). R Nonestab
3) COIL SPRING (MIG-29) I.CODE 002[2110019002]() Specification : SPECN NO.ADRDE/1235-SA-2(b). R Nonestab
4) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
5) SHACKLE 'D' SHAPED LARGE[2110060002]() Specification : SPECIFICATION :DRAWING NO ADRDE/303(c). R Nonestab
6) SHACKLE D SHAPED SMALL[2110060015]() Specification : SPECIFICATION/DRAWING:ADRDE/304((b). R Nonestab
7) PACKING PIN WIRE ROPE 5 MM DIA EN-8[2110019007]() Specification : SPECN NO.:.ADRDE Drg.No. ADRDE/1235 A-8(b) R Nonestab
8) CONOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : DRAWING NO. ADRDE/1233(a) C Nonestab
9) SNAP HOOK QUICK EJECTOR[2110061002]() Specification : SPCN.NO.ADRDE/1210(b) C Nonestab
10) BRIDDLE RING FOR B.P. PARA JAGUAR A/C[2110018001]() Specification : DRAWING NO. : ADRDE/269(c) R Nonestab
11) COIL SPRING (I.CODE 2110025024[2110025024]() Specification : DRNG. NO.ADRDE/1402-03-002 R Nonestab
12) COIL SPRING WITH CONE.(B.P. MIRAGE)[2110060004]() Specification : DRAWING NO:ADRDE/305(b). R Nonestab
13) CURVED PIN[2110018002]() Specification : DRAWING NO. : ADRDE/270 R Nonestab
14) NIV GROMMET 8MM WITH WASHER STAINLESS STEEL[2110008013]() Specification : DRAWING NO. CQA(GS)/US/561 C Nonestab
15) GROMMET WITH WASHER 14 MM[2110060006]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Nonestab
16) PACKING PIN DRG. NO. ADRDE/ 1402-05[2110025027]() Specification : DRG. NO. ADRDE/ 1402-05 R Nonestab
17) RIP CORD LARGE[2110027005]() Specification : PROV DRAWING NO.ADRDE/115(f). R Nonestab
18) TOWING RING 20MM.ID[2110025023]() Specification : DRG.NO.ADRDE/1402-02-002. R Nonestab
19) TOWING RING LARGE - 82mm[2110999001]() Specification : SPECN NO.Prov.Drg.No.ADRDE/77(e) R Nonestab
20) TOWING RING SMALL 14.5mm[2110999002]() Specification : SPECN. NO.:.Drg.NO.ADRDE/77 (e) R Nonestab
21) NIV WASHER FOR LOOP PACK CLOSING[2110008011]() Specification : DRAWING NO. CQA(GS)/US/559 C Nonestab
22) GROMMET BRASS WITH STEEL WASHER 14 MM[2110005000]() Specification : DRAWING NO.: ADRDE/291 R Nonestab
23) NIV STIFFENER FOR RIP CORD PROTECTION FLAP (PTA-R)[2110008010]() Specification : DRAWING NO. CQA(GS)/US/556(a) R Nonestab
24) RIP CORD SMALL[2110005004]() Specification : DRAWING NO. ADRDE/282(b) R Nonestab
25) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Nonestab
26) PULLY MIG-29 (I.CODE 9001)[2110019001]() Specification : DRG.NO.ADRDE/1235-SA-1(c). R Nonestab
27) A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM[2102064015]() Specification : SPECN.NO.IND/GS/1802 C Nonestab
28) CANOPY RIGGING LINK DETACHABLE (PTR-M)DS CAT.NO.1670-000320[2110017010]() Specification : SPECNG NO. IND/GS/1801 C Nonestab
29) A4/1670-000125 TRIANGULAR D RING FOR CARGO PARACHUTE[2110025003]() Specification : SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 ) C Nonestab
30) BUCKLE PACK OUTER(PTRM)[2102062825]() Specification : SPECN.NO.IND/GS/1795 C Nonestab
31) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
32) SHACKLE WITH PULLY[2110060001]() Specification : SPECN/DRG.NO: ADRDE/302(c). R Nonestab
33) PULLY MIG-29[2110019021]() Specification : ADRDE/1235-SA1(d) R Nonestab
34) TOWING RING LARGE[2110019004]() Specification : DRG NO ADRDE/1235-A2(b). R Nonestab
35) BUCKLE D SHAPED (PTR-M)[2102053921]() Specification : SPECN.NO.IND/GS/1798 C Nonestab
36) GROMMET WITH WASHER (13.5 MM)[2110025025]() Specification : DRAWING NO. ADRDE/1402-03-003 R Nonestab
37) GROMMET WITH WASHER 11mm[2110060007]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Nonestab
38) RIP CORD WITH PIN[2110019006]() Specification : SPECN.NO.ADRDE/1235-A9(b). R Nonestab
39) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
40) PULLEY FOR B.P SU-30[2110025022]() Specification : DRG.NO.ADRDE/1402-01--002 R Nonestab
41) TOWING RING SMALL[2110019005]() Specification : SPECN NO-ADRDE/1235-A2(b). R Nonestab
42) A4/5315-004372 LOCKING PIN FOR SNAP HOOK FOR PP TYPE PTR-R 7.30M[2110340003]() Specification : SPCN.NO.IND/GS/1826(a) R Nonestab
43) Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute[2110080016]() Specification : CQA(GS)/US/563 R Nonestab
44) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]() Specification : SPCN.NO.IND/GS/1815 (b) R Nonestab
45) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I/COE-8017)[2110008017]() Specification : CQA(GS)/US/564 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) KEEL IN 3 PIECES[9911037587]() Specification : IMSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A) and As per Clause 5.6 and 5.7 of Specn No. CQAE/1940/ 1520(b):2006 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) FOLDING OARS PADDLES[9911037586]() Specification : IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) AIR VALVE FOR RECEE BOAT[9911037590]() Specification : IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) OBM BRACKET ASSEMBLY[9911037584]() Specification : IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I CODE-8009)[2110008009]() Specification : SPECN-ADRDE/PAS/2004/01(a) R Nonestab
2) PULLY SMALL[2055100006]() Specification : Prov. Drg. NO. ADRDE/172(b). R Nonestab
3) COIL SPRING (MIG-29) I.CODE 002[2110019002]() Specification : SPECN NO.ADRDE/1235-SA-2(b). R Nonestab
4) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
5) SHACKLE 'D' SHAPED LARGE[2110060002]() Specification : SPECIFICATION :DRAWING NO ADRDE/303(c). R Nonestab
6) SHACKLE D SHAPED SMALL[2110060015]() Specification : SPECIFICATION/DRAWING:ADRDE/304((b). R Nonestab
7) PACKING PIN WIRE ROPE 5 MM DIA EN-8[2110019007]() Specification : SPECN NO.:.ADRDE Drg.No. ADRDE/1235 A-8(b) R Nonestab
8) CONOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : DRAWING NO. ADRDE/1233(a) C Nonestab
9) SNAP HOOK QUICK EJECTOR[2110061002]() Specification : SPCN.NO.ADRDE/1210(b) C Nonestab
10) BRIDDLE RING FOR B.P. PARA JAGUAR A/C[2110018001]() Specification : DRAWING NO. : ADRDE/269(c) R Nonestab
11) COIL SPRING (I.CODE 2110025024[2110025024]() Specification : DRNG. NO.ADRDE/1402-03-002 R Nonestab
12) COIL SPRING WITH CONE.(B.P. MIRAGE)[2110060004]() Specification : DRAWING NO:ADRDE/305(b). R Nonestab
13) CURVED PIN[2110018002]() Specification : DRAWING NO. : ADRDE/270 R Nonestab
14) NIV GROMMET 8MM WITH WASHER STAINLESS STEEL[2110008013]() Specification : DRAWING NO. CQA(GS)/US/561 C Nonestab
15) GROMMET WITH WASHER 14 MM[2110060006]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Nonestab
16) PACKING PIN DRG. NO. ADRDE/ 1402-05[2110025027]() Specification : DRG. NO. ADRDE/ 1402-05 R Nonestab
17) RIP CORD LARGE[2110027005]() Specification : PROV DRAWING NO.ADRDE/115(f). R Nonestab
18) TOWING RING 20MM.ID[2110025023]() Specification : DRG.NO.ADRDE/1402-02-002. R Nonestab
19) TOWING RING LARGE - 82mm[2110999001]() Specification : SPECN NO.Prov.Drg.No.ADRDE/77(e) R Nonestab
20) TOWING RING SMALL 14.5mm[2110999002]() Specification : SPECN. NO.:.Drg.NO.ADRDE/77 (e) R Nonestab
21) NIV WASHER FOR LOOP PACK CLOSING[2110008011]() Specification : DRAWING NO. CQA(GS)/US/559 C Nonestab
22) GROMMET BRASS WITH STEEL WASHER 14 MM[2110005000]() Specification : DRAWING NO.: ADRDE/291 R Nonestab
23) NIV STIFFENER FOR RIP CORD PROTECTION FLAP (PTA-R)[2110008010]() Specification : DRAWING NO. CQA(GS)/US/556(a) R Nonestab
24) RIP CORD SMALL[2110005004]() Specification : DRAWING NO. ADRDE/282(b) R Nonestab
25) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Nonestab
26) PULLY MIG-29 (I.CODE 9001)[2110019001]() Specification : DRG.NO.ADRDE/1235-SA-1(c). R Nonestab
27) A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM[2102064015]() Specification : SPECN.NO.IND/GS/1802 C Nonestab
28) CANOPY RIGGING LINK DETACHABLE (PTR-M)DS CAT.NO.1670-000320[2110017010]() Specification : SPECNG NO. IND/GS/1801 C Nonestab
29) A4/1670-000125 TRIANGULAR D RING FOR CARGO PARACHUTE[2110025003]() Specification : SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 ) C Nonestab
30) BUCKLE PACK OUTER(PTRM)[2102062825]() Specification : SPECN.NO.IND/GS/1795 C Nonestab
31) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
32) SHACKLE WITH PULLY[2110060001]() Specification : SPECN/DRG.NO: ADRDE/302(c). R Nonestab
33) PULLY MIG-29[2110019021]() Specification : ADRDE/1235-SA1(d) R Nonestab
34) TOWING RING LARGE[2110019004]() Specification : DRG NO ADRDE/1235-A2(b). R Nonestab
35) BUCKLE D SHAPED (PTR-M)[2102053921]() Specification : SPECN.NO.IND/GS/1798 C Nonestab
36) GROMMET WITH WASHER (13.5 MM)[2110025025]() Specification : DRAWING NO. ADRDE/1402-03-003 R Nonestab
37) GROMMET WITH WASHER 11mm[2110060007]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Nonestab
38) RIP CORD WITH PIN[2110019006]() Specification : SPECN.NO.ADRDE/1235-A9(b). R Nonestab
39) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
40) PULLEY FOR B.P SU-30[2110025022]() Specification : DRG.NO.ADRDE/1402-01--002 R Nonestab
41) TOWING RING SMALL[2110019005]() Specification : SPECN NO-ADRDE/1235-A2(b). R Nonestab
42) A4/5315-004372 LOCKING PIN FOR SNAP HOOK FOR PP TYPE PTR-R 7.30M[2110340003]() Specification : SPCN.NO.IND/GS/1826(a) R Nonestab
43) Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute[2110080016]() Specification : CQA(GS)/US/563 R Nonestab
44) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]() Specification : SPCN.NO.IND/GS/1815 (b) R Nonestab
45) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I/COE-8017)[2110008017]() Specification : CQA(GS)/US/564 R Nonestab
46) A-4/1670 -000313 SPRING FOR AUXILIARY PARACHUTE PTRR 7.30M.[2110008005]() Specification : DRAWING NO. : IND/GS/1831. R Nonestab
47) A4/5340-000461 GROMMET AND WASHER 16 MM PTR-R[2111992501]() Specification : DRAWING NO. : IND/GS/1818(a). R Nonestab
48) BUCKLE ADRDE/1429-01[2110029012]() Specification : DRG.NO.DRD/344/96 R Nonestab
49) BUCKLE ADRDE/PAS/2008/22[2010019021]() Specification : SPECN.NO:-ADRDE/PAS/2008/22. R Nonestab
50) BUCKLE "D"SHAPED FOR PTR-M[2110005012]() Specification : SPECN-ADRDE/1230(c) R Nonestab
51) BUCKLE LEG & BREAST ADOPTER[2010019023]() Specification : SPECN-NO:- DRG.NO.ADRDE/1352. R Nonestab
52) BUCKLE WITH BAR[2101221284]() Specification : SPECN-DRD/332/96,ADRDE/1430. R Nonestab
53) BUCKLE, ADRDE/1428[2110029013]() Specification : DRG.NO.DRD/356/96, ADRDE/1428 R Nonestab
54) CANOPY RIGGING LINK WITH BOLT FOR PSM SERIES[2010068061]() Specification : DRG.NO.ADRDE/1314-G"a ". R Nonestab
55) CAT PART NO. 4010-002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION[2110032003]() Specification : SPECN: IND/GS/1887. R Nonestab
56) Cat/Part No. 14/5420-000105 CRAMP FOR SADDLE STRAP[2010990194]() Specification : DRAWING NO.: IMPD-0948/A R Nonestab
57) CLAMPING BUCKLE FOR SADDLE STRAP Cat/Part No.: 14/5420-000152[2010990466]() Specification : DRAWING NO.: IMPD-0947 R Nonestab
58) CLIP SAFETY FOR 4 POINT QUICK RELEASE BOX (ACCT).[2110036000]() Specification : DRAWING NO. ADRDE/143 (b) R Nonestab
59) CLASP FOR MAIN SLEEVE ( NEW )[2010068063]() Specification : SPECN.NO./DRAWING NO.-ADRDE/1327(a) R Nonestab
60) CLIPPER EMERGENCY[2110071023]() Specification : SPECN/DRG.NO.:ADRDE/1364(a) DRD/17/98. R Nonestab
61) COIL SPRING (FOR TAIL UNIT)[2101069002]() Specification : SPECN NO.ADRDE/1159-A-1/SA-8-5 R Nonestab
62) COIL SPRING (I.CODE 6055)[2110036055]() Specification : SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11 R Nonestab
63) COIL SPRING RTU.[2110050007]() Specification : DRAWING NO. : ADRDE/1041A-1/SA-1 R Nonestab
64) CONE BASE[2110071021]() Specification : DRG.NO.:ADRDE/1367(a) DRD/14/98. R Nonestab
65) CONE TOP[2110071011]() Specification : DRG. NO. :ADRDE/1320(a) DRD/59/98 R Nonestab
66) CONES PACK LOCKING FOR CHEST TYPE PARA[1460100000]() Specification : SPECN. NO. ADRDE/124(b) R Nonestab
67) CONNECTING LUG (BEND)[2110071003]() Specification : DRG. NO.:ADRDE/1295(a) DRD/28/98. R Nonestab
68) CONNECTING LUG for PP JAGUAR[2110075013]() Specification : DRG.NO.ADRDE/1339 R Nonestab
69) CONNECTING LUG OF AUXILIRAY PARACHUTE[2110071008]() Specification : DRG.NO.:ADRDE/1301 (a) DRD/43/98. R Nonestab
70) CONNECTING LUG OF END PLATE[2110071025]() Specification : DRG.NO.:ADRDE/1366(a) DRD/15/98. C Nonestab
71) CONNECTOR ‘D’ RING AIR CREW PARACHUTE[2110048004]() Specification : DRG. NO. ADRDE/200(a) R Nonestab
72) COTTER PIN[2101126382]() Specification : SPECN. NO. DRD/340/96,ADRDE/1289(b) R Nonestab
73) CROSS CONNECTOR STRAP SAFETY PIN[2110019020]() Specification : DRG.NO.ADRDE/1390 R Nonestab
74) D RING (I/CODE 71010)[2110071010]() Specification : DRG. NO. ADRDE/1298 (a) DRD/31/98 R Nonestab
75) "D" RING for PP JAGUAR[2110075007]() Specification : DRG.NO.ADRDE/1337 R Nonestab
76) DETACHABLE ALIGNMENT RING FOR PILOT PARACHUTE JAGUARE A/C[2110079012]() Specification : DRG.NO.ADRDE/1342. R Nonestab
77) DETACHABLE SHROUD LINK[2110071001]() Specification : DRG. NO.:ADRDE/1299-G(c) DRD/32/98 R Nonestab
78) DISCONNECT LOCK WITH BUCKLE[2110019013]() Specification : DRG.NO.ADRDE/1355. C Nonestab
79) END STRIP[2110019014]() Specification : DRG.NO.ADRDE/1382. R Nonestab
80) EYES FOR PACK OPENING ELASTIC STAINLESS[2111603910]() Specification : A4/1670-000328 DRAWING NO.IND/GS/1768. R Nonestab
81) FOUR POINT QUICK RELEASE BOX (Ref No 15A/529 AND ADRDE[2110014015]() Specification : Ref No 15A/529 AND ADRDE SKETCH NO. ADDE/63 R Nonestab
82) FRAME FOR PACK CHEST[2110048001]() Specification : DRAWING/SPECIFICATION NO:ADRDE/121(f) R Nonestab
83) GROMMET 18 MM WITH WASHER (I.CODE-8040)[2110168040]() Specification : ADRDE/PAS/2005/11 R Nonestab
84) GROMMET 20 MM WITH SPECIAL WASHER[2110068009]() Specification : SPECN/DRG. NO. ADRDE/142(c) R Nonestab
85) GROMMET WITH SPECIAL TYPE OF WASHER 12 MM[2110019017]() Specification : DRG.NO.-ADRDE/248/(a) R Nonestab
86) GROMMET WITH WASHER 8 MM[2110062008]() Specification : DRAWING NO.ADRDE/80(f) R Nonestab
87) GROMMET WITH WASHER (I.CODE-9010)[2110029010]() Specification : DRD/375/97 ADRDE/1432. R Nonestab
88) GROMMET WITH WASHER 18 MM DIA (I/CODE 65005)[2110065005]() Specification : ADRDE/2004/03 R Nonestab
89) GUIDE RING FOR HARNESS MIRAGE-2000 & SEA HARRIER A/C[2110075032]() Specification : SPECN-ADRDE/1448 R Nonestab
90) HARLEY BUCKLE[2110065014]() Specification : SPECN.NO:-ADRDE/1308(b) R Nonestab
91) HARNESS ATTACHMENT LUG[2111990001]() Specification : SPECN. NO.:ADRDE/192(a). R Nonestab
92) HELICAL SPRING[2110065007]() Specification : DRG. NO. ADRDE/1164 - A8 (AS PER SHEET NO.106) R Nonestab
93) HOLDING BUCKLE[2110071002]() Specification : DRG.NO.:ADRDE/1297 ( b ) R Nonestab
94) HOOK FOR ELASTIC PACK OPENING[2111605910]() Specification : SPECN. NO. ADRDE/87(f) R Nonestab
95) HOOK SNAP HARNESS D-18[2110040023]() Specification : DRG.NO.ADRDE/7(F). R Nonestab
96) HOUSING SUB ASSMBELY[2110038022]() Specification : SPECN NO. ADRDE/786-SA-2 R Nonestab
97) INERTIA PROOF QUICK RELEASE FITTING 4 POINT WITH CONNECTING LUG LARGE AND SMALL[9911036174]() Specification : QUANTITY = 01. DRAWING NO. ADRDE/209(b) QUANTITY = 02. DRAWING NO. ADRDE/1305(a) QUANTITY = 02. DRAWING NO. ADRDE/1365(c) R Nonestab
98) INVERTED "V"[2110071024]() Specification : DRG.NO.: ADRDE/1359(a) DRD/25/98. R Nonestab
99) LACING 'D' RING[2110005013]() Specification : SPECN./DRG. NO. ADRDE/1229(d). R Nonestab
100) LAP STRAP ADJUSTABLE BUCKLE (FOR PILOT PARA JAGUAR A/C.)[2110075021]() Specification : SPCN.AS PER ADRDE/1456. R Nonestab
101) LEG LOOP SHACKLE[2110019012]() Specification : DRG.NO.ADRDE/1381. R Nonestab
102) LOCK OCK WITH BUCKLE[2110069032]() Specification : ADRDE/1354. R Nonestab
103) LOWER HARNESS LUG[2110075008]() Specification : DRG.NO.ADRDE/1336 (b) R Nonestab
104) LUG METAL(AIR CREW PARACHUTE CHEST TYPE MK-1)[2110040024]() Specification : SPECN. NO. ADRDE/122(c). R Nonestab
105) METAL PULLY ( COMPONENT )[2110060019]() Specification : SPECN.NO.ADRDE/1449. R Nonestab
106) METALIC PLATE STEFFINING[2110071026]() Specification : DRG.NO.:ADRDE/1368(a) DRD/16/98 R Nonestab
107) METALLIC REEL[2110038021]() Specification : SPECN NO.ADRDE/786-SA-1 R Nonestab
108) METALLIC RING[2110029015]() Specification : DO/129/93, ADRDE/1293. R Nonestab
109) MOULDED PLATE TYPE-I[2110071012]() Specification : DRG. NO.:ADRDE/1309(a) DRD/42/98 R Nonestab
110) MOULDED PLATE TYPE-II WITH CURVED PLATE (METALLIC ARC SUPPORT) STIFFENER PLATE (METALLIC ARC SUPPORT) RIVETS[2010071030]() Specification : DRG.NO. 1-ADRDE/1310(b) MOULDED PLATE TYPE-II.QTY.01 NOS. 2-ADRDE/1311(b) CURVED PLATE (METALLIC ARC SUPPORT) QTY-01 NOS. 3-ADRDE/1311-02(b) R Nonestab
111) NIV PACK FRAME[2110008014]() Specification : DRAWING NO.CQA(GS)/US/557 C Nonestab
112) PACK OPENING SPRING ELASTIC 440 MM[2110061008]() Specification : SPECIFICATION NO:- IND/GS/1827(a) EXCEPT LENGTH. C Nonestab
113) PACK OPENING SPRING ELASTIC LONG 203 MM[2110065003]() Specification : ADRDE/781(d)EXCEPT FOR LENGTH R Nonestab
114) PACK OPENING SPRING ELASTIC LONG 89 MM[2110065004]() Specification : ADRDE/781(d)EXCEPT FOR LENGTH R Nonestab
115) PACK OPENING SPRING ELASTIC SHORT 370 MM[2110061007]() Specification : SPECIFICATION NO.IND/GS/1827(a) EXCEPT LENNGTH. C Nonestab
116) PACK STEEL FOR AIR CREW CHEST TYPE PARA[2110040025]() Specification : DRAWING NO.: ADRDE/123(d) R Nonestab
117) PIN ASSEMBLY[2010071032]() Specification : DRG.NO.ADRDE/PAS/2008/23 R Nonestab
118) PIN DRD/341/96[2110029008]() Specification : ADRDE/1288. R Nonestab
119) PIN FOR BALL TYPE AUXILARY[2110068034]() Specification : ADRDE/1316 R Nonestab
120) PIN FOR LINK 25 M[2110029017]() Specification : ADRDE/1433. R Nonestab
121) PIN FOR LOCKING LINK[2010068054]() Specification : DRG.NO.-ADRDE/1180. R Nonestab
122) PIN SECURING FLAP[2110038023]() Specification : SPECN NO.ADRDE/786-SA-3 R Nonestab
123) PIN WITH PULLY[2110071016]() Specification : DRG. NO.:ADRDE/1300-G(b) DRD/33/98 R Nonestab
124) PLATE CURVED WITH HOLE[2110018006]() Specification : SPCN/DRG:ADRDE/1107(c) sheet no. 8 R Nonestab
125) PULLEY FOR ROTATING CANOPY[2110068044]() Specification : SPECN:- ADRDE/1319(a) R Nonestab
126) PULLY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6 R Nonestab
127) PULLY FOR LINK 25 M LONG[2110029016]() Specification : ADRDR/1292. R Nonestab
128) PULLY RTU.[2110026012]() Specification : DRG. NO.ADRDE/1041A-2/SA-1 R Nonestab
129) QUICK RELEASE ADJ. BUCKLE[2110062009]() Specification : Drawing No. : ADRDE/205(d) R Nonestab
130) QUICK RELEASE CONNECTING LUG (MALE)[2110018012]() Specification : SPECN. NO:-ADRDE/1107(C). SHEET NO.7 R Nonestab
131) QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)[2110075020]() Specification : SPCN.NO.AS PER ADRDE/1455 R Nonestab
132) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Nonestab
133) QUICK RELEASE UNIT[2110071022]() Specification : SPECN.NO.: ADRDE/1369(a) DRD/26/98. R Nonestab
134) REEL[2110038035]() Specification : DRG.NO ADRDE/1457. R Nonestab
135) RELEASE UNIT[2110030002]() Specification : DRAWING NO. : DO/196/84 R Nonestab
136) RING (I.CODE-1283)[2101221283]() Specification : SPECN-DRD/393/97,ADRDE/1290. R Nonestab
137) RING 14 MM[2110038004]() Specification : SPECN.NO-ADRDE/1324(a). R Nonestab
138) RING DRD/395/97[2110029011]() Specification : DRG.-DRD/395/97 ADRDE/1291. R Nonestab
139) RING FOR AUXIALARY LINK FOR PSM SERIES[2010068058]() Specification : DRG.NO:-ADRDE/1393. R Nonestab
140) RING FOR BREAK LINK FOR PSM SERIES[2010068057]() Specification : DRG.NO:-ADRDE/1392 R Nonestab
141) RING for PP PSU (I.CODE-9018)[2110019018]() Specification : DRG.NO.-ADRDE/1458 R Nonestab
142) RING FOR STRAND COVER (PSM SERIES)[2010068062]() Specification : DRG.NO:-ADRDE/1353. R Nonestab
143) RIP CORD ASSEMBLY (FOR PILOT PARA JAGUAR A/C)[2110075018]() Specification : SPCN.NO.AS PER ADRDE/1453(a) R Nonestab
144) RIP CORD ASSEMBLY FOR PACK CHEST[2110048000]() Specification : DRAWING NO.: ADRDE/169(d). R Nonestab
145) RIP CORD ASSEMBLY PP BMK[2110071029]() Specification : ADRDE/1323-G(c) R Nonestab
146) RIP CORD HANDLE[2110068038]() Specification : ADRDE/1325-G/DRD/65/98 R Estab
147) ROLLER FITTING[2110075019]() Specification : SPCN.NO.AS PER ADRDE/1446 R Nonestab
148) SHOULDER ADJUSTABLE BUCKLE (A.C.P.B./C.T.)[2110080015]() Specification : SPECN NO. ADRDE\194(a). R Nonestab
149) SHOULDER BUCKLE (UPPER)[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
150) SNAP HOOK AND SPRING CLIP FOR ACCT[2110008507]() Specification : ADRDE/196(d) & ADRDE/197(d). R Nonestab
151) SNAP HOOK STATIC LINE[2110029014]() Specification : DRD/357/96 ADRDE/1431. R Nonestab
152) SOCKET FOR HARNESS FOR PSM SERIES[2010068055]() Specification : DRG.NO.ADRDE/1387 R Nonestab
153) SPEADER BAR PRIMARY (ASSY)[2110070001]() Specification : SPECN-ARM-1350-B4 R Nonestab
154) SPREADER BAR SECONDARY[0619058514]() Specification : DWG.NO. ARM 1350 B 11 R Nonestab
155) SPREADLE BAR BUCKLE[2110075002]() Specification : DRG. NO.ADRDE/1341(c) R Nonestab
156) SPRING FOR RIP CORD POCKET FOR PSM SERIES 3,4,& 5[2010068059]() Specification : DRG.NO:-ADRDE/PAS/2008/27 R Nonestab
157) STEEL RING[2110032000]() Specification : SPECN. NO. IND/GS/1871. R Nonestab
158) STICKER STREP LUG[2110075000]() Specification : DRG. NO. ADRDE/1338(a) R Nonestab
159) STIFFENNER FOR RIP CORD PIN PROTECTION FLAP[2110030007]() Specification : SPECN:-ADRDE/86(c) R Nonestab
160) STIFFNER PLATE[2110036054]() Specification : SPECN-ADRDE/1423 R Nonestab
161) STRAND SAFETY PIN FOR PSM SERIES[2010068060]() Specification : DRG.NO:-ADRDE/1384. R Nonestab
162) SWIVEL CONE WITH PLATE[2110071013]() Specification : DRG.NO.:ADRDE/1321(b) DRD/60/98. R Nonestab
163) THIMBLE[2110057005]() Specification : SPECIFICATION: ADRDE/1394(a) R Nonestab
164) THIMBLE FOR 120 MM BOMB PARACHUTE[2110033001]() Specification : SPECN./DRG.NO. CQA(GS)/US/381 R Nonestab
165) THIMBLE FOR PARACHUTE SYSTEM FOR MORTAR BOMB 81mm ILLUMINATING MK-II VERSION[2110052003]() Specification : DRG. NO. ADRDE/1113(a) R Nonestab
166) TRINGULAR D RING[2110072001]() Specification : SPECN-ARM 1350 B 3 R Nonestab
167) U SHACKLE for PP PSU[2110019015]() Specification : DRG. NO-ADRDE/1380. R Nonestab
168) VENT RING FOR EJECTION DROUGE[2110068043]() Specification : ADRDE/1328 R Nonestab
169) WAIST LOOP SHACKLE[2110068042]() Specification : ADRDE/1313 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I CODE-8009)[2110008009]() Specification : SPECN-ADRDE/PAS/2004/01(a) R Estab
2) PULLY SMALL[2055100006]() Specification : Prov. Drg. NO. ADRDE/172(b). R Estab
3) COIL SPRING (MIG-29) I.CODE 002[2110019002]() Specification : SPECN NO.ADRDE/1235-SA-2(b). R Estab
4) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Estab
5) SHACKLE 'D' SHAPED LARGE[2110060002]() Specification : SPECIFICATION :DRAWING NO ADRDE/303(c). R Estab
6) SHACKLE D SHAPED SMALL[2110060015]() Specification : SPECIFICATION/DRAWING:ADRDE/304((b). R Estab
7) PACKING PIN WIRE ROPE 5 MM DIA EN-8[2110019007]() Specification : SPECN NO.:.ADRDE Drg.No. ADRDE/1235 A-8(b) R Estab
8) CONOPY RELEASE ASSEMBLY WITH WIRE LOOP[2110021012]() Specification : DRAWING NO. ADRDE/1233(a) C Estab
9) SNAP HOOK QUICK EJECTOR[2110061002]() Specification : SPCN.NO.ADRDE/1210(b) C Estab
10) BRIDDLE RING FOR B.P. PARA JAGUAR A/C[2110018001]() Specification : DRAWING NO. : ADRDE/269(c) R Estab
11) COIL SPRING (I.CODE 2110025024[2110025024]() Specification : DRNG. NO.ADRDE/1402-03-002 R Estab
12) COIL SPRING WITH CONE.(B.P. MIRAGE)[2110060004]() Specification : DRAWING NO:ADRDE/305(b). R Estab
13) CURVED PIN[2110018002]() Specification : DRAWING NO. : ADRDE/270 R Estab
14) NIV GROMMET 8MM WITH WASHER STAINLESS STEEL[2110008013]() Specification : DRAWING NO. CQA(GS)/US/561 C Estab
15) GROMMET WITH WASHER 14 MM[2110060006]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Estab
16) PACKING PIN DRG. NO. ADRDE/ 1402-05[2110025027]() Specification : DRG. NO. ADRDE/ 1402-05 R Estab
17) RIP CORD LARGE[2110027005]() Specification : PROV DRAWING NO.ADRDE/115(f). R Estab
18) TOWING RING 20MM.ID[2110025023]() Specification : DRG.NO.ADRDE/1402-02-002. R Estab
19) TOWING RING LARGE - 82mm[2110999001]() Specification : SPECN NO.Prov.Drg.No.ADRDE/77(e) R Estab
20) TOWING RING SMALL 14.5mm[2110999002]() Specification : SPECN. NO.:.Drg.NO.ADRDE/77 (e) R Estab
21) NIV WASHER FOR LOOP PACK CLOSING[2110008011]() Specification : DRAWING NO. CQA(GS)/US/559 C Estab
22) GROMMET BRASS WITH STEEL WASHER 14 MM[2110005000]() Specification : DRAWING NO.: ADRDE/291 R Estab
23) NIV STIFFENER FOR RIP CORD PROTECTION FLAP (PTA-R)[2110008010]() Specification : DRAWING NO. CQA(GS)/US/556(a) R Estab
24) RIP CORD SMALL[2110005004]() Specification : DRAWING NO. ADRDE/282(b) R Estab
25) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Estab
26) PULLY MIG-29 (I.CODE 9001)[2110019001]() Specification : DRG.NO.ADRDE/1235-SA-1(c). R Estab
27) A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM[2102064015]() Specification : SPECN.NO.IND/GS/1802 C Estab
28) CANOPY RIGGING LINK DETACHABLE (PTR-M)DS CAT.NO.1670-000320[2110017010]() Specification : SPECNG NO. IND/GS/1801 C Estab
29) A4/1670-000125 TRIANGULAR D RING FOR CARGO PARACHUTE[2110025003]() Specification : SPECIFICATION NO. JSS:1670-03-2011(REV NO.2 ) C Estab
30) BUCKLE PACK OUTER(PTRM)[2102062825]() Specification : SPECN.NO.IND/GS/1795 C Estab
31) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Estab
32) SHACKLE WITH PULLY[2110060001]() Specification : SPECN/DRG.NO: ADRDE/302(c). R Estab
33) PULLY MIG-29[2110019021]() Specification : ADRDE/1235-SA1(d) R Estab
34) TOWING RING LARGE[2110019004]() Specification : DRG NO ADRDE/1235-A2(b). R Estab
35) BUCKLE D SHAPED (PTR-M)[2102053921]() Specification : SPECN.NO.IND/GS/1798 C Estab
36) GROMMET WITH WASHER (13.5 MM)[2110025025]() Specification : DRAWING NO. ADRDE/1402-03-003 R Estab
37) GROMMET WITH WASHER 11mm[2110060007]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Estab
38) RIP CORD WITH PIN[2110019006]() Specification : SPECN.NO.ADRDE/1235-A9(b). R Estab
39) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Estab
40) PULLEY FOR B.P SU-30[2110025022]() Specification : DRG.NO.ADRDE/1402-01--002 R Estab
41) TOWING RING SMALL[2110019005]() Specification : SPECN NO-ADRDE/1235-A2(b). R Estab
42) A4/5315-004372 LOCKING PIN FOR SNAP HOOK FOR PP TYPE PTR-R 7.30M[2110340003]() Specification : SPCN.NO.IND/GS/1826(a) R Estab
43) Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute[2110080016]() Specification : CQA(GS)/US/563 R Estab
44) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]() Specification : SPCN.NO.IND/GS/1815 (b) R Estab
45) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I/COE-8017)[2110008017]() Specification : CQA(GS)/US/564 R Estab
46) A-4/1670 -000313 SPRING FOR AUXILIARY PARACHUTE PTRR 7.30M.[2110008005]() Specification : DRAWING NO. : IND/GS/1831. R Estab
47) A4/5340-000461 GROMMET AND WASHER 16 MM PTR-R[2111992501]() Specification : DRAWING NO. : IND/GS/1818(a). R Estab
48) BUCKLE ADRDE/1429-01[2110029012]() Specification : DRG.NO.DRD/344/96 R Estab
49) BUCKLE ADRDE/PAS/2008/22[2010019021]() Specification : SPECN.NO:-ADRDE/PAS/2008/22. R Estab
50) BUCKLE [2110005012]() Specification : SPECN-ADRDE/1230(c) R Estab
51) BUCKLE LEG & BREAST ADOPTER[2010019023]() Specification : SPECN-NO:- DRG.NO.ADRDE/1352. R Estab
52) BUCKLE WITH BAR[2101221284]() Specification : SPECN-DRD/332/96,ADRDE/1430. R Estab
53) BUCKLE, ADRDE/1428[2110029013]() Specification : DRG.NO.DRD/356/96, ADRDE/1428 R Estab
54) CANOPY RIGGING LINK WITH BOLT FOR PSM SERIES[2010068061]() Specification : DRG.NO.ADRDE/1314-G"a ". R Estab
55) CAT PART NO. 4010-002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION[2110032003]() Specification : SPECN: IND/GS/1887. R Estab
56) Cat/Part No. 14/5420-000105 CRAMP FOR SADDLE STRAP[2010990194]() Specification : DRAWING NO.: IMPD-0948/A R Estab
57) CLAMPING BUCKLE FOR SADDLE STRAP Cat/Part No.: 14/5420-000152[2010990466]() Specification : DRAWING NO.: IMPD-0947 R Estab
58) CLIP SAFETY FOR 4 POINT QUICK RELEASE BOX (ACCT).[2110036000]() Specification : DRAWING NO. ADRDE/143 (b) R Estab
59) CLASP FOR MAIN SLEEVE ( NEW )[2010068063]() Specification : SPECN.NO./DRAWING NO.-ADRDE/1327(a) R Estab
60) CLIPPER EMERGENCY[2110071023]() Specification : SPECN/DRG.NO.:ADRDE/1364(a) DRD/17/98. R Estab
61) COIL SPRING (FOR TAIL UNIT)[2101069002]() Specification : SPECN NO.ADRDE/1159-A-1/SA-8-5 R Estab
62) COIL SPRING (I.CODE 6055)[2110036055]() Specification : SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11 R Estab
63) COIL SPRING RTU.[2110050007]() Specification : DRAWING NO. : ADRDE/1041A-1/SA-1 R Estab
64) CONE BASE[2110071021]() Specification : DRG.NO.:ADRDE/1367(a) DRD/14/98. R Estab
65) CONE TOP[2110071011]() Specification : DRG. NO. :ADRDE/1320(a) DRD/59/98 R Estab
66) CONES PACK LOCKING FOR CHEST TYPE PARA[1460100000]() Specification : SPECN. NO. ADRDE/124(b) R Estab
67) CONNECTING LUG (BEND)[2110071003]() Specification : DRG. NO.:ADRDE/1295(a) DRD/28/98. R Estab
68) CONNECTING LUG for PP JAGUAR[2110075013]() Specification : DRG.NO.ADRDE/1339 R Estab
69) CONNECTING LUG OF AUXILIRAY PARACHUTE[2110071008]() Specification : DRG.NO.:ADRDE/1301 (a) DRD/43/98. R Estab
70) CONNECTING LUG OF END PLATE[2110071025]() Specification : DRG.NO.:ADRDE/1366(a) DRD/15/98. C Estab
71) CONNECTOR ‘D’ RING AIR CREW PARACHUTE[2110048004]() Specification : DRG. NO. ADRDE/200(a) R Estab
72) COTTER PIN[2101126382]() Specification : SPECN. NO. DRD/340/96,ADRDE/1289(b) R Estab
73) CROSS CONNECTOR STRAP SAFETY PIN[2110019020]() Specification : DRG.NO.ADRDE/1390 R Estab
74) D RING (I/CODE 71010)[2110071010]() Specification : DRG. NO. ADRDE/1298 (a) DRD/31/98 R Estab
75) D RING for PP JAGUAR[2110075007]() Specification : DRG.NO.ADRDE/1337 R Estab
76) DETACHABLE ALIGNMENT RING FOR PILOT PARACHUTE JAGUARE A/C[2110079012]() Specification : DRG.NO.ADRDE/1342. R Estab
77) DETACHABLE SHROUD LINK[2110071001]() Specification : DRG. NO.:ADRDE/1299-G(c) DRD/32/98 R Estab
78) DISCONNECT LOCK WITH BUCKLE[2110019013]() Specification : DRG.NO.ADRDE/1355. C Estab
79) END STRIP[2110019014]() Specification : DRG.NO.ADRDE/1382. R Estab
80) EYES FOR PACK OPENING ELASTIC STAINLESS[2111603910]() Specification : A4/1670-000328 DRAWING NO.IND/GS/1768. R Estab
81) FOUR POINT QUICK RELEASE BOX (Ref No 15A/529 AND ADRDE[2110014015]() Specification : Ref No 15A/529 AND ADRDE SKETCH NO. ADDE/63 R Estab
82) FRAME FOR PACK CHEST[2110048001]() Specification : DRAWING/SPECIFICATION NO:ADRDE/121(f) R Estab
83) GROMMET 18 MM WITH WASHER (I.CODE-8040)[2110168040]() Specification : ADRDE/PAS/2005/11 R Estab
84) GROMMET 20 MM WITH SPECIAL WASHER[2110068009]() Specification : SPECN/DRG. NO. ADRDE/142(c) R Estab
85) GROMMET WITH SPECIAL TYPE OF WASHER 12 MM[2110019017]() Specification : DRG.NO.-ADRDE/248/(a) R Estab
86) GROMMET WITH WASHER 8 MM[2110062008]() Specification : DRAWING NO.ADRDE/80(f) R Estab
87) GROMMET WITH WASHER (I.CODE-9010)[2110029010]() Specification : DRD/375/97 ADRDE/1432. R Estab
88) GROMMET WITH WASHER 18 MM DIA (I/CODE 65005)[2110065005]() Specification : ADRDE/2004/03 R Estab
89) GUIDE RING FOR HARNESS MIRAGE-2000 & SEA HARRIER A/C[2110075032]() Specification : SPECN-ADRDE/1448 R Estab
90) HARLEY BUCKLE[2110065014]() Specification : SPECN.NO:-ADRDE/1308(b) R Estab
91) HARNESS ATTACHMENT LUG[2111990001]() Specification : SPECN. NO.:ADRDE/192(a). R Estab
92) HELICAL SPRING[2110065007]() Specification : DRG. NO. ADRDE/1164 - A8 (AS PER SHEET NO.106) R Estab
93) HOLDING BUCKLE[2110071002]() Specification : DRG.NO.:ADRDE/1297 ( b ) R Estab
94) HOOK FOR ELASTIC PACK OPENING[2111605910]() Specification : SPECN. NO. ADRDE/87(f) R Estab
95) HOOK SNAP HARNESS D-18[2110040023]() Specification : DRG.NO.ADRDE/7(F). R Estab
96) HOUSING SUB ASSMBELY[2110038022]() Specification : SPECN NO. ADRDE/786-SA-2 R Estab
97) INERTIA PROOF QUICK RELEASE FITTING 4 POINT WITH CONNECTING LUG LARGE AND SMALL[9911036174]() Specification : QUANTITY = 01. DRAWING NO. ADRDE/209(b) QUANTITY = 02. DRAWING NO. ADRDE/1305(a) QUANTITY = 02. DRAWING NO. ADRDE/1365(c) R Estab
98) INVERTED V[2110071024]() Specification : DRG.NO.: ADRDE/1359(a) DRD/25/98. R Estab
99) LACING 'D' RING[2110005013]() Specification : SPECN./DRG. NO. ADRDE/1229(d). R Estab
100) LAP STRAP ADJUSTABLE BUCKLE (FOR PILOT PARA JAGUAR A/C.)[2110075021]() Specification : SPCN.AS PER ADRDE/1456. R Estab
101) LEG LOOP SHACKLE[2110019012]() Specification : DRG.NO.ADRDE/1381. R Estab
102) LOCK OCK WITH BUCKLE[2110069032]() Specification : ADRDE/1354. R Estab
103) LOWER HARNESS LUG[2110075008]() Specification : DRG.NO.ADRDE/1336 (b) R Estab
104) LUG METAL(AIR CREW PARACHUTE CHEST TYPE MK-1)[2110040024]() Specification : SPECN. NO. ADRDE/122(c). R Estab
105) METAL PULLY ( COMPONENT )[2110060019]() Specification : SPECN.NO.ADRDE/1449. R Estab
106) METALIC PLATE STEFFINING[2110071026]() Specification : DRG.NO.:ADRDE/1368(a) DRD/16/98 R Estab
107) METALLIC REEL[2110038021]() Specification : SPECN NO.ADRDE/786-SA-1 R Estab
108) METALLIC RING[2110029015]() Specification : DO/129/93, ADRDE/1293. R Estab
109) MOULDED PLATE TYPE-I[2110071012]() Specification : DRG. NO.:ADRDE/1309(a) DRD/42/98 R Estab
110) MOULDED PLATE TYPE-II WITH CURVED PLATE (METALLIC ARC SUPPORT) STIFFENER PLATE (METALLIC ARC SUPPORT) RIVETS[2010071030]() Specification : DRG.NO. 1-ADRDE/1310(b) MOULDED PLATE TYPE-II.QTY.01 NOS. 2-ADRDE/1311(b) CURVED PLATE (METALLIC ARC SUPPORT) QTY-01 NOS. 3-ADRDE/1311-02(b) R Estab
111) NIV PACK FRAME[2110008014]() Specification : DRAWING NO.CQA(GS)/US/557 C Estab
112) PACK OPENING SPRING ELASTIC 440 MM[2110061008]() Specification : SPECIFICATION NO:- IND/GS/1827(a) EXCEPT LENGTH. C Estab
113) PACK OPENING SPRING ELASTIC LONG 203 MM[2110065003]() Specification : ADRDE/781(d)EXCEPT FOR LENGTH R Estab
114) PACK OPENING SPRING ELASTIC LONG 89 MM[2110065004]() Specification : ADRDE/781(d)EXCEPT FOR LENGTH R Estab
115) PACK OPENING SPRING ELASTIC SHORT 370 MM[2110061007]() Specification : SPECIFICATION NO.IND/GS/1827(a) EXCEPT LENNGTH. C Estab
116) PACK STEEL FOR AIR CREW CHEST TYPE PARA[2110040025]() Specification : DRAWING NO.: ADRDE/123(d) R Estab
117) PIN ASSEMBLY[2010071032]() Specification : DRG.NO.ADRDE/PAS/2008/23 R Estab
118) PIN DRD/341/96[2110029008]() Specification : ADRDE/1288. R Estab
119) PIN FOR BALL TYPE AUXILARY[2110068034]() Specification : ADRDE/1316 R Estab
120) PIN FOR LINK 25 M[2110029017]() Specification : ADRDE/1433. R Estab
121) PIN FOR LOCKING LINK[2010068054]() Specification : DRG.NO.-ADRDE/1180. R Estab
122) PIN SECURING FLAP[2110038023]() Specification : SPECN NO.ADRDE/786-SA-3 R Estab
123) PIN WITH PULLY[2110071016]() Specification : DRG. NO.:ADRDE/1300-G(b) DRD/33/98 R Estab
124) PLATE CURVED WITH HOLE[2110018006]() Specification : SPCN/DRG:ADRDE/1107(c) sheet no. 8 R Estab
125) PULLEY FOR ROTATING CANOPY[2110068044]() Specification : SPECN:- ADRDE/1319(a) R Estab
126) PULLY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6 R Estab
127) PULLY FOR LINK 25 M LONG[2110029016]() Specification : ADRDR/1292. R Estab
128) PULLY RTU.[2110026012]() Specification : DRG. NO.ADRDE/1041A-2/SA-1 R Estab
129) QUICK RELEASE ADJ. BUCKLE[2110062009]() Specification : Drawing No. : ADRDE/205(d) R Estab
130) QUICK RELEASE CONNECTING LUG (MALE)[2110018012]() Specification : SPECN. NO:-ADRDE/1107(C). SHEET NO.7 R Estab
131) QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)[2110075020]() Specification : SPCN.NO.AS PER ADRDE/1455 R Estab
132) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Estab
133) QUICK RELEASE UNIT[2110071022]() Specification : SPECN.NO.: ADRDE/1369(a) DRD/26/98. R Estab
134) REEL[2110038035]() Specification : DRG.NO ADRDE/1457. R Estab
135) RELEASE UNIT[2110030002]() Specification : DRAWING NO. : DO/196/84 R Estab
136) RING (I.CODE-1283)[2101221283]() Specification : SPECN-DRD/393/97,ADRDE/1290. R Estab
137) RING 14 MM[2110038004]() Specification : SPECN.NO-ADRDE/1324(a). R Estab
138) RING DRD/395/97[2110029011]() Specification : DRG.-DRD/395/97 ADRDE/1291. R Estab
139) RING FOR AUXIALARY LINK FOR PSM SERIES[2010068058]() Specification : DRG.NO:-ADRDE/1393. R Estab
140) RING FOR BREAK LINK FOR PSM SERIES[2010068057]() Specification : DRG.NO:-ADRDE/1392 R Estab
141) RING for PP PSU (I.CODE-9018)[2110019018]() Specification : DRG.NO.-ADRDE/1458 R Estab
142) RING FOR STRAND COVER (PSM SERIES)[2010068062]() Specification : DRG.NO:-ADRDE/1353. R Estab
143) RIP CORD ASSEMBLY (FOR PILOT PARA JAGUAR A/C)[2110075018]() Specification : SPCN.NO.AS PER ADRDE/1453(a) R Estab
144) RIP CORD ASSEMBLY FOR PACK CHEST[2110048000]() Specification : DRAWING NO.: ADRDE/169(d). R Estab
145) RIP CORD ASSEMBLY PP BMK[2110071029]() Specification : ADRDE/1323-G(c) R Estab
146) RIP CORD HANDLE[2110068038]() Specification : ADRDE/1325-G/DRD/65/98 R Estab
147) ROLLER FITTING[2110075019]() Specification : SPCN.NO.AS PER ADRDE/1446 R Estab
148) SHOULDER ADJUSTABLE BUCKLE (A.C.P.B./C.T.)[2110080015]() Specification : SPECN NO. ADRDE\194(a). R Estab
149) SHOULDER BUCKLE (UPPER)[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Estab
150) SNAP HOOK AND SPRING CLIP FOR ACCT[2110008507]() Specification : ADRDE/196(d) & ADRDE/197(d). R Estab
151) SNAP HOOK STATIC LINE[2110029014]() Specification : DRD/357/96 ADRDE/1431. R Estab
152) SOCKET FOR HARNESS FOR PSM SERIES[2010068055]() Specification : DRG.NO.ADRDE/1387 R Estab
153) SPEADER BAR PRIMARY (ASSY)[2110070001]() Specification : SPECN-ARM-1350-B4 R Estab
154) SPREADER BAR SECONDARY[0619058514]() Specification : DWG.NO. ARM 1350 B 11 R Estab
155) SPREADLE BAR BUCKLE[2110075002]() Specification : DRG. NO.ADRDE/1341(c) R Estab
156) SPRING FOR RIP CORD POCKET FOR PSM SERIES 3,4,& 5[2010068059]() Specification : DRG.NO:-ADRDE/PAS/2008/27 R Estab
157) STEEL RING[2110032000]() Specification : SPECN. NO. IND/GS/1871. R Estab
158) STICKER STREP LUG[2110075000]() Specification : DRG. NO. ADRDE/1338(a) R Estab
159) STIFFENNER FOR RIP CORD PIN PROTECTION FLAP[2110030007]() Specification : SPECN:-ADRDE/86(c) R Estab
160) STIFFNER PLATE[2110036054]() Specification : SPECN-ADRDE/1423 R Estab
161) STRAND SAFETY PIN FOR PSM SERIES[2010068060]() Specification : DRG.NO:-ADRDE/1384. R Estab
162) SWIVEL CONE WITH PLATE[2110071013]() Specification : DRG.NO.:ADRDE/1321(b) DRD/60/98. R Estab
163) THIMBLE[2110057005]() Specification : SPECIFICATION: ADRDE/1394(a) R Estab
164) THIMBLE FOR 120 MM BOMB PARACHUTE[2110033001]() Specification : SPECN./DRG.NO. CQA(GS)/US/381 R Estab
165) THIMBLE FOR PARACHUTE SYSTEM FOR MORTAR BOMB 81mm ILLUMINATING MK-II VERSION[2110052003]() Specification : DRG. NO. ADRDE/1113(a) R Estab
166) TRINGULAR D RING[2110072001]() Specification : SPECN-ARM 1350 B 3 R Estab
167) U SHACKLE for PP PSU[2110019015]() Specification : DRG. NO-ADRDE/1380. R Estab
168) VENT RING FOR EJECTION DROUGE[2110068043]() Specification : ADRDE/1328 R Estab
169) WAIST LOOP SHACKLE[2110068042]() Specification : ADRDE/1313 R Estab
170) ADJUSTMENT BUCKLE[2111080016]() Specification : DRAWING NO. ADRDE/193(a). R Nonestab
171) Assembly female Coupling of DWL Jaguar A/C[2110075034]() Specification : ADRDE/1344(a) R Nonestab
172) D HOOK for BOAT RECCE[9911037581]() Specification : Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3 R Nonestab
173) D Ring Lower for Folding Bailer Radius 76 mm[9911037578]() Specification : Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing R Nonestab
174) DETACHABLE ALIGNMENT RING[2110071009]() Specification : DRG.NO.:ADRDE/1296-G(b) DRD/29/98. R Nonestab
175) DINGHY RING[2110002015]() Specification : DRWING/SPECIFICATION NO:ADRDE/147(d) R Nonestab
176) PARACHUTE SYSTEM FOR BOMB 51 ILLUMINATING AMMUNITION (THIMBLE)[2110057001]() Specification : DRAWING NO. : ADRDE/553-A-1(a). R Nonestab
177) LIFT WEB RESTRAIT STRAP FOR SEA HARRIER/MIRAGE-2000A/C[2110075033]() Specification : SPECN-ADRDE/1346(b) R Nonestab
178) LIFT WEB SPACER[2111990002]() Specification : SPECIFICATION NO. : ADRDE/195(a) R Nonestab
179) SEAT PAN LUG[2110071005]() Specification : SPECN./DRG.NO.:ADRDE/1303 (a) DRD/45/98 R Nonestab
180) D Ring Upper for Folding Bailer Radius 51 mm[9911037577]() Specification : D-Ring Upper for Folding Bailer (Radius- 51 mm) R Nonestab
181) Adopter Link[2010990854]() Specification : ADRDE/1.6.01-03-06(a) R Nonestab
182) Aluminum Alloy Handle for folding bailer[2111602229]() Specification : Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing R Nonestab
183) BALL TYPE SPRING[2110068033]() Specification : DRG./SPECN.NO.ADRDE/1332-G(a) DRD/71/98 R Nonestab
184) HOUSING WITH FERRULE & RUBBER SLEEVE FOR PP MIRAG 2000/SEA HARRIER A/C[2110077018]() Specification : SPECN-ADRDE/1357(a) R Nonestab
185) METAL PULLEY MKII[2110060022]() Specification : ADRDE/1449 except that : new material i.e X2CrNi19-11 as per specification BS EN10216-5:2004 R Nonestab
186) MOORING PIN[2103703003]() Specification : SPECN-IMPD-0411 R Nonestab
187) POLYGEN HOLLOW[2103610126]() Specification : AS PER DRG. NO. OPF/DO/ME/263 R Nonestab
188) SPRING EJECTOR[2110075024]() Specification : SPCN.NO.ADRDE/1197-A3/(SA-2)(a) R Nonestab
189) DISC FOR BALL TYPE AUXIALARY[2010068056]() Specification : DRG.NO.ADRDE/1389 R Nonestab
190) LINK SOLID FOR HARNESS[2110069011]() Specification : SPECN.NO. ADRDE/1212 R Nonestab
191) ROW LOCK ASSEMBLY[2103703007]() Specification : SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046) R Nonestab
192) SHACKLE WITH NUT AND BOLT GREY 62248[2110077021]() Specification : DRG. NO. ADRDE/ PAS/2008/25 C Nonestab
193) SHACKLE WITH NUT AND BOLT BLACK[2110077022]() Specification : DRG. NO. ADRDE/ 1348-G (b) R Nonestab
194) CONE BASE AND CONE TOP[2110071031]() Specification : DRG.NO. ADRDE/1367(b) AND ADRDE/1320(b) R Nonestab
195) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
196) YELLOW/WHITE LINE RIP PIN. (SHEET 1 OF 8 )[2110071015]() Specification : DRG. NO.: ADRDE/1322(b) DRD/66/98. R Nonestab
197) ALUMINIUM TUBE[2110025028]() Specification : DRG. NO.ADRDE/1402-08 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER STAR FOR 81MM ILLG.[62]() Specification : CQA(A) 2345 DRG. NO. ARDE 1965 DET 12 PT. NO. ITV 122 C Nonestab
2) TAIL UNIT 11A FOR 81MM ILLG.[62]() Specification : SPECN. CQA(A) 2346(d) DC-36906-A DT. 04-7-03 DRG. NO. ARDE 2222 DET 4 PT. NO. ITV 38A DC 35729-A C Nonestab
3) CUP HALF (ALU) FOR BOMB 81MM ILLG. MK-II[62]() Specification : CUP HALF ASSY. TO DRG. NO. ARDE 2222, PT NO. ITV 257 SHT-1 AND CUP HALF TO DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2 C Nonestab
4) NOSE ASSEMBLY FOR BOMB PRACTICE 3 KG[62]() Specification : DRG.NO.ARDE 2024/DET.1 CONSISTING OF : (1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5 (5)MULTI-TOOTH LOCK C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]() Specification : DRG.NO 2440AI3012 DC-37535A DATED 22.10.19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]() Specification : CQA(A) 2345 C Nonestab
2) BASE PLATE FOR 81MM ILLG.[62]() Specification : SPECN. CQA(A) 2345 (C) DRG. NO. ARDE 1965 DET 13 PT NO. ITV 123 C Nonestab
3) FERRULE (AL) FOR 81MM IILG.MK-II [62]() Specification : DRG NO ARDE 1965 DET 21 PT NO ITV 131 C Nonestab
4) BAFFLE PLATE FOR 81MM ILLG. MK II[62]() Specification : DRG NO. ARDE 1965, DET 15, PT NO. ITV 125, DC 37039A DT. 25/01/2006. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Eye bolt for M.B. 81mm Illg. 2A[62]() Specification : CQA(A) 2345(c) Drg. No. ARDE 1965 DET 14 PT.NO. ITV 124 C Nonestab
2) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
3) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) OUTER CONTAINER[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275/1 DET.NO.2 Qty 22000 Nos P Nonestab
2) CENTRAL TUBE WITH DISC[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.4 C Nonestab
3) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
4) DELAY ELEMENT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12 C Nonestab
5) SECURING NUT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.13 C Nonestab
6) PROPELLANT CUP FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A C Nonestab
7) PROPELLANT CUP CLOSURE FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.18 C Nonestab
8) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9910448016 LEVER CONTROL HAND 2530 017684 ILG 1917 2530 017684[90]() Specification : 9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CONTAINER FOR BSO[62]() Specification : CONTAINER TO DRG NO.OFDR/CT/1/M1/A3AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN. NO. DGOF/OFDR/008. R Nonestab
2) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
3) SHELL003 FOR 81MM SMOKE 3D6[62]() Specification : S PER DRAWING NO.4-26941 DET 040CB C Nonestab
4) RING FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET C Nonestab
5) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 008 C Nonestab
6) DELAY ELEMENT FOR 81MM SMOKE 3D6[62]() Specification : NO. CIA/AMN/2498,PART NO. IQX868 C Nonestab
7) PERFORATED DISC FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.3755(B) C Nonestab
8) PROPELLENT CUP FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 013 C Nonestab
9) SECURING NUT FOR 81MM 3D6[62]() Specification : NO. 4-26941 015 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Body Cast Iron Empty for FTW[64]() Specification : CIA 3807(d) Drg. No. DD(L) 13461/A/1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG M1A1[63]() Specification : DRG NO. 2440A20008 C Nonestab
2) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2440A13003 DC-36552-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Pin tent angle Iron medium() As per Specification R Estab
2) Pin Carbon Steel small for Tent.() As per Specification R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Tent Ring() As per Specification C Nonestab
2) Tent Dees Iron() As per Specification C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Twisted Pin() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) CLIP TO DRG No GCF TM 284 C REF DRG No 2A26 06 13 DS CAT No 5340 006395[90]() Specification : CLIP TO DRG No GCF TM 284 C REF DRG No 2A26 06 13 DS CAT No 5340 006395 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Body Cast Iron Empty for FTW[64]() Specification : CIA 3807(d) Drg. No. DD(L) 13461/A/1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BALL RACE ASSY (CONSISTING OF (i) PIN DRG.NO.2440A13013 (ii)BALL RACE TO DRG.NO.3100-33005 ) FOR SH[63]() Specification : DRG NO.2440A13013 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG M1A1[63]() Specification : DRG NO. 2440A20008 C Nonestab
2) PIN IMBALANCE FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2439A00015 C Nonestab
3) PIN FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2440803007 C Nonestab
4) DELAY HOLDER FOR SHELL 155 MM ILLG.M1A1[63]() Specification : DRG. NO. 2440A03062 C Nonestab
5) Pin shearing for Shell 155mm Illg. M1A1[63]() Specification : Drg. No. 2439A00009 C Nonestab
6) SET OF HOLDER PRIMARY CHARGE & ADAPTER PRIMARY CHARGE FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2439A22010 & 2439A22011 C Nonestab
7) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2440A13003 DC-36552-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
2) SHELL003 FOR 81MM SMOKE 3D6[62]() Specification : S PER DRAWING NO.4-26941 DET 040CB C Nonestab
3) RING FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET C Nonestab
4) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]() Specification : DRG. NO. 4-26941 008 C Nonestab
5) PERFORATED DISC FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.3755(B) C Nonestab
6) SECURING NUT FOR 81MM 3D6[62]() Specification : NO. 4-26941 015 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Three way joint with base plate for Tent Extendable frame() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Four way joint for tent extendable frame() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Three way joint for roof pole for tent extendable frame() AS PER SPECFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Pin carbon steel for tent for hot dip galvanised() As per Specification. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Clip iron for Tent Extendable() As per Specification. R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Tent ring IG 12.5mm() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Runner light weight small() As per Specification. C Estab
2) Cross bracing for tent extendable frame supported.() As per Specification C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Eyelet Aluminium alloy chemically passivited no.28 with turn over washer() As per Specification E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Dee Steel 38*32*4 mm() As per Specification. R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Spanner() As per Specification. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Hexagonal Bolt with loop fitted.() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Roof Poles with three way joints() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Hammer 2Kgs() As per Specification. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) U pin for tents() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Pole Bivouac for Tank crew ( MSCN)() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Hook Iron() As per Specification E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Pole standing Aluminum alloy complete assembly() As per Specification E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Poles for Multi spectral camouflage net ( MSCN)() As per Specification R Nonestab
2) Spike for MSCN() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) AMMUNITION POUCH FOR GPMG[70]() Specification : AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Nickle coated snap fastener Four Pieces spring type 7/7 with plastic washer in bronzed black finish.() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Buckle Brass All type() Specification : IND/GS/1541(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Hook Brass All Type() Specification : IND/GS/1541(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Eyelet Aluminum Alloy ( All Types)() Specification : CQA(GS)/SS/335As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Horizontal Inclined Pole() Specification : DMSRDE/T&GS/93/407(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Front Back pole with with Base plate() Specification : DMSRDE/T&GS/93/407(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Frame of Carrier Man pack() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Buckle quick release serrated Special for Carrier man pack() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Iron Hook 23BG(0.71mm) thick 12mm Width.() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Adjuster Buckle 38MM() AS PER Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) DOG Hook 38MM() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) D Ring 38MM() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Anodized Aluminum alloy Pipe() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) GROMMET WITH WASHER 21MM ID() As per Specification. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Horizontal Pole() Specification : DMSRDE/T&GS/93407(b) R Nonestab
2) Side pole with Base plate() Specification : DMSRDE/T&GS/93407(b) R Estab
3) Pin Steel T-Shape() Specification : DMSRDE/T&GS/93407(b) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Ring ID 15MM() As per Specification : ADRDE 1.4.08-12 R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9080081585 WHEEL ASSEMBLY TO PART NO 1015 000798[90]() Specification : WHEEL ASSEMBLY TO PART NO. 1015- 000798 C Nonestab
2) 9080086782 BRAKE DRUM 2530 004669 SHT 1 2[90]() Specification : BRAKE DRUM 2530-004669 SHT. 1&2 C Nonestab
3) 9080081501 PACKING NUT MACHINING TO DRG NO 4730 006970 SHT1[90]() Specification : PACKING NUT(MACHINING) TO DRG.NO.4730-006970 SHT-1. C Nonestab
4) 9080086754 HAND WHEEL SADDLE ASSY 5340016867[90]() Specification : HAND WHEEL (SADDLE ASSY) 5340-016867 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2[90]() Specification : 9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2 C Nonestab
2) 9080081524 COVER CANVAS MULT APPLICATION TO DRG NO1015 000955[90]() Specification : COVER CANVAS MULT APPLICATION TO DRG NO1015 000955 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PACKING CASE FOR FLOAT INTERNAL DIMENSIONS 1900 X 1150 X 900 mm[1469901603]() Specification : SPECN:-IMPD-0962/A R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CRATE FOR PACKING OF PLATEFORM SIZE 1140MM X 850MM X 230MM INSIDE (DIMENTION)[9911035298]() Specification : SPECN. 65 MM X 20MM CHIR WOOD WELL FINISHED and FREE FROM KNOTSAND CRACKS TREATED WITH COPPER NAPTHANATE SOLUTION and PAINTED OG R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BOX FOR PACKING OF BOAT INFLATABLE[9911035299]() Specification : BOXES SHOULD BE MADE FROM 20MM THICK WELL FINISHED & FREE FROM KNOTS & CRACKS TIMBER CHIR WOOD. SIX SUITABLE STEEL HANDLE SHOULD BE PROVIDED IN THE BOX (TWO LENGTHWISE AND ONE WIDTH WISE ON EACH SIDE). SIZE- 2000MMX700MMX400MM. (INSIDE DIM R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CRATE FOR PACKING OF KEEL[9911035297]() Specification : CRATE SHOULD BE MADE FROM 20MM THICK WELL FINISHED ANDFREE FROM KNOTS & CRACKS TIMBER CHIR WOOD.SIZE :- 1400MMX250MMX250MM(INSIDE DIMENSION) R Nonestab
2) CRATE FOR PACKING BOAT RECEE[9911036500]() Specification : CRATE FOR PACKING BOAT RECEE SIZE-1600 MM X 700 MM X 350 MM INSIDE DIMENTION WITH 6 STEEL HANDLES OF 16 MM DIA POLYPROP-YLENE ROPE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CRATE FOR PACKING OF BOAT for Boat Gemini Craft[9911037679]() Specification : IS 1503 R Nonestab
2) CRATE FOR PACKING OF PLATFORM for Boat Gemini Craft[9911037680]() Specification : IS 1503 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PADDLE WOODEN BOAT[9911035963]() Specification : As per Drg. No. IMPD-1424. The timber species used to manufacture paddles are Chaplash, Deodar, Kathal, Aini, Gamari, Teak, Padauk, Kail and Champak as per IS: 1325 and IS: 399. The paddles shall govern the Preservation/Painting workmanshi R Nonestab
2) Section Multipurpose Packing Frame[2110090003]() Specification : SPECN – ADRDE/1.6.01.04-26 R Nonestab
Category :
Grade : Grade III
Size : S
1703 KRISHNA ENGINEERING INDUSTRIES
NEW CHHACHHRAULI ROAD JAGADHRI YAMUNANAGAR Haryana
PIN1 : 135003
Phone No. : 243880
GSTIN : 06AAAFK7606A1ZW 		RTKK01780C

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694 Description : BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694() Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED). R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 25 4X0 63 MM LF 0717560949 Description : BRASS STRIP 25 4X0 63 MM LF 0717560949() Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1 R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BRASS STRIP 0.42 MM - 0.02 MM THICK X 39.5 MM + - 0.25 MM WIDE, HARDNESS 55 TO 75 HV, SPECIFICATION JSS-9535-02-2008 Rev.3. FREE FROM ANISOTROPHY DEFECT,THICKNESS VARIATION MAX 0.005 MM ACROSS WIDTH IN A COIL. COIL WEIGHT 8 + - 2 KG.[07]() Specification : JSS-9535-02-2008 Rev.3 R Nonestab
2) BRASS STRIP 0.15 MM +- 0.025MM THICK X 19.5 MM +-0.1 MM WIDE TO SPECN IS:410-1977 REAFFIRMED 2006 AMDS 1 DESIGNATION NO. Cu Zn 37, CONDITION HB, HARDNESS 110 HV - 135 HV.[07]() Specification : IS:410-1977 REAFFIRMED 2006 AMDS 1 R Nonestab
3) BRASS STRIP 2.03 MM + - 0.025MM THICK X 19.05 MM + - 0.25 MM WIDE , HARDNESS 145 TO 180 HV, SPEECN JSS-9535-02-2008 REV. 3[07]() Specification : JSS-9535-02-2008 REV. 3 R Nonestab
4) BRASS STRIPS 1.00 mm + 0.02 mm THICK X 12.00 mm + - 0.25 mm WIDE, 1/4 HARD HARDNESS 70-95 HV,SPECIFICATION JSS-9535-02- 2008 REV. 3 (WT OF COIL 5 TO 7 KG).[07]() Specification : JSS-9535-02- 2008 REV. 3 R Nonestab
5) BRASS STRIP 0.40 mm + - 0.025 mm THICK X 113 mm + - 0.25 mm WIDE ANNEALED,HARDNESS 55 TO 75 HV, SPECN JSS 9535-02:2008 REV. 3.[07]() Specification : JSS 9535-02:2008 REV. 3. R Nonestab
6) BRASS STRIP 0.47 MM + - 0.010 MM THICK X 35.6 MM + - 0.25 MM WIDE.THICKNESS VARIATION ACROSS WIDTH MAXIMUM 0.005MM&0.01mm LENGTHWISE IN A COIL. FREE FROM ANISOTROPHY DEFECT. HARDNESS 80+- 10 HV. IN A COIL OF I/D 100 mm APPROX & WEIGHT OF COIL 10 KG+- 3 KG SPECN:JSS-9535-02-2008 REV. 3 )[07]() Specification : JSS-9535-02-2008 REV. 3 R Nonestab
7) BRASS STRIP 0.70 +-0.010MMTHICK X 32.0+-0.25MM WIDE ANNEALED HARDNESS 55 TO 75 HV, GRAIN SIZE 0.035MMTO 0.045MM,VARIATION IN THICKNESS ACCROSS WIDTH NOT TO EXCEED 0.005 MM, TO SPECN JSS 9535-02:2008 REV NO. 3 IN COILS,I/D 100MM APPROX,STRIP LENGTH 20-40 MTR COIL WT.1OKG MAX FREE FROM SURFACE BLEMISHES[07]() Specification : JSS 9535-02:2008 REV NO. 3 R Nonestab
8) BRASS STRIP 0.81 MM +- 0.010MM THICK X 35.60MM +-0.25MM WIDE HARDNESS 55 TO 75 HV TO SPECN JSS 9535-02:2008 Rev 3 VARIATION IN THICKNESS SHOULD NOT EXCEED 0.005MM ACROSS WIDTH. MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. COIL WEIGHT TO BE APPROX 10 + - 2 KG[07]() Specification : JSS 9535-02:2008 Rev 3 R Nonestab
9) BRASS STRIP 0.56 mm + - 0.025 mm THICK X 16 mm + - 0.25 mm WIDE HARDNESS 110 TO 130 HV, TO SPECN JSS:9535-02: 2008) REV. 3[07]() Specification : JSS:9535-02: 2008) REV. 3 R Nonestab
10) BRASS STRIP 0.40MM +-0.025MM X 38MM+- 0.25MM WIDE ANNEALED, HARDNESS 55 TO 75 HV SPECN JSS-9535-02 - 2008 Rev. No. 3[07]() Specification : JSS-9535-02 - 2008 Rev. No. 3 R Nonestab
11) BRASS STRIP 0.58 MM PLUS/MINUS 0.025MM THICK X 35.6 MM PLUS/ MINUS 0.25 MM WIDE,ANNEALED HARDNESS 55 TO 75 HV,SPECN- JSS-9535 - 02 - 2008 REV. NO. 3 THICKNESS VARIATION ACROSS WIDTH NOT TO EXCEED 0.005 MM, MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. WEIGHT OF COIL 7 KG MAX. [07]() Specification : JSS-9535 - 02 - 2008 REV. NO. 3 R Nonestab
12) BRASS STRIP 0.70 mm + - 0.025 mm THICK X 35.6 mm + - 0.25 mm WIDE, ANNEALED, HARDNESS 55 TO 75 HV SPECN JSS 9535-02:2008 Rev. 3 [07]() Specification : JSS 9535-02:2008 Rev. 3 R Nonestab
13) BRASS STRIP 0.30 mm + - 0.025 mm THICK X 75 mm + - 0.25 mm WIDE, ANNEALED, HARDNESS 55 TO 75 HV TO SPECN - JSS - 9535 - 02 - 2008 REV. 3 TO BE SUPPLIED IN COIL FORM OF I/D 100mm APPROX AND WEIGHT OF COIL TO BE 15 KG MAXIMUM.[07]() Specification : JSS - 9535 - 02 - 2008 REV. 3 R Nonestab
14) BRASS STRIP 0.67MM PLUS MINUS 0.01MM THICK X 7.8MM PLUS 0.00 PLUS 0.30MM WIDE HARDNESS 55 TO 75HV. THICKNESS VARIAION MAX. 0.005MM ACROSS WIDTH AND 0.01MM LENGTH WISE IN A COIL FREE FROM ANISOTROPIC DEFECT SPEC. JSS-9535-02: -2008 REV. 3 WEIGHT OF EACH COIL 4 TO 5.5 KG[07]() Specification : JSS-9535-02: -2008 REV. 3 R Nonestab
15) 70/30, ANNEALED BRASS STRIP OF 21.0 (-)0.2 MM WIDTH & 0.5 (+/-) 0.01MM THICKNESS, BRIGHT, CLEAN & FREE FROM SURFACE FOLDS AS PER SPECIFICATION NO.L3 sec./SPECN/39 DT. 27/9/10[07]() Specification : SPECIFICATION NO.L3 sec./SPECN/39 DT. 27/9/10 R Nonestab
16) BRASS STRIP 0.51 MM + - O.025 MM THICK X 34.3 MM + - 0.25 MM WIDE, HARDNESS 110 TO 130 HV, SPECN BS2870-1980, DESIGNATION CZ-107.[07]() Specification : BS 2870-1980, DESIGNATION CZ-107. R Nonestab
17) BRASS STRIP 0.58 MM +- 0.025MM THICK X 54MM +- 0.25MM WIDE ANNEALED HARDNRSS 55 TO 75 HV SPECN.JSS 9535-2-FEB.82 WITH AMENEMENT NO.1(WEIGHT OF THE COIL SHOULD BE 10 TO 25 KG WITH INTERNAL DIA.100/150 MM).[07]() Specification : JSS 9535-2-FEB.82 WITH AMENEMENT NO.1 R Nonestab
18) BRASS STRIP 0.76 MM + - 0.025 MM THICK X 36 MM + - 0.25 MM WIDE ANNEALED, HARDNESS 55 TO 75 HV SPECN JSS-9535 2(FEB 82) WITH AMENDMENT NO 1.[07]() Specification : JSS-9535 2(FEB 82) WITH AMENDMENT NO 1. R Nonestab
19) BRASS STRIP 0.81MM # 0.025MM THICK X 64MM # 0.25MM WIDE ANNE ALED HARDNESS 55 TO 75 HV SPECN-JSS-9535-02- 2008 REV 3[07]() Specification : JSS-9535-02- 2008 REV 3 R Nonestab
20) BRASS STRIP 0.63MM # 0.013MM THICK X 27MM # 0.25MM WIDE HALF HARD HARDNESS 110 TO 130 HV SPECN JSS-9535 2FEB 82[07]() Specification : JSS-9535 2FEB 82 R Nonestab
Category : p
Grade : Grade II
Size : S
1704 AAN ENGINEERING INDUSTRIES LIMITED
38 K.M STONE DELHI JAIPUR HIGHWAY KHANDSA VILLAGE GURUGRAM Haryana
PIN1 : 122001
Phone No. : 2824801
GSTIN : 06AAECR6020J1ZI 		RTKR05880A

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY EMPTY FOR 51 MM SMOKE [62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPEN.NO.CQA(A) 2352 (d) C Nonestab
2) BODY FOR 51 MM ILLUMINATING[62]() Specification : DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Body Cast Iron Empty for FTW[64]() Specification : CIA 3807(d) Drg. No. DD(L) 13461/A/1 C Nonestab
2) BOMB BODY (EMPTY)FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]() Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
2) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) FUZE T&P DA NO. 213P MK-5( M4) EMPTY FOR MORTAR BOMB 120MM ILLG.[63]() Specification : L 9974-F(L) [DRG. NO. 2907A-10004] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) FUZE T&P DA NO. 213P MK-5( M3) EMPTY FOR MORTAR BOMB 81 MM ILLG.2A[62]() Specification : L 9974-F(L) [DRG. NO. ARDE1987 RT ,part no. IQX 67] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922[63]() Specification : CQA(A) 0922 C Nonestab
2) FUZE PERCN DA NO.117 MK 20 EMPTY/COMPLETE/WITH CAP DESGN REF L5/10744/GE/341 PART NO. QX 244 GE AND ITEM LIST FOR QX 244 GE DESGN REF NO.(I.A.6900) L5 / 10744 / GE / 341, SPECN NO. I.A. 1204[63]() Specification : I.A. 1204 C Nonestab
3) FUZE PERCN.D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DESIGN.REF.NO. CIA/AMN/273 PT.NO. IQX 35 GE SPECN. NO. CQA(A) 0917[6331800110]() Specification : CQA(A) 0917 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY (9911356459)[99]() Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB. E Nonestab
Category : ddp
Grade : Grade II
Size : L
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...[99]() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... R Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...[99]() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... R Nonestab
2) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : ddp
Grade : Grade II
Size : S
1705 SHINGORA TEXTILES LIMITED
VPO DORAHA TEHSIL PAYAL GT ROAD DORAHA LUDHIANA Punjab
PIN1 : 141421
Phone No. : 513000
GSTIN : 03AAMCS0431Q1Z6 		DELS36253B

Download 		1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Fabric Nylon 90 GSM Dyed/Undyed() As per Governing Specification R Nonestab
2) Fabric Nylon 45 GSM zero porosity Dyed/Undyed.() As per Governing Specification R Nonestab
3) Fabric Nylon 42 GSM low porosity rip stop weave() As per Governing Specification R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Polyurethane coated Nylon Fabric 300 GSM 550N/cm BS.() As per Governing Specification. R Nonestab
2) Fabric Nylon 75 GSM, 92 kgf BS Dyed/Undyed.() As per Governing Specification. R Nonestab
3) Fabric Nylon 48 GSM.() As per Governing Specification. R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Fabric 75 GSM Nylon 66() AS PER GOVERNING SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Fabric Nylon 230 GSM() As per Governing Specification R Nonestab
2) Fabric Nylon 37 GSM() As per Governing Specification R Nonestab
Category :
Grade : Grade III
Size : M
1706 Kalyani Forge Limited
Shangrila Garden,B&C Wings 1st Floor,Bund Garden Road,Pune 411 001 Bund Garden Road Pune Maharashtra
PIN1 : 412216
Phone No. : 2137252335
GSTIN : 27AAACK7311H1ZQ 		AAACK7311H

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]() Specification : CQA(A)- 2322 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]() Specification : CQA(A)- 2322 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ammunition Factory Khadki
Name Specification Use Status
1) BOMB 120MM HE 1A EMPTY BODY[60]() Specification : SPECN NO. CQA(A) 2341(A) DC 37482-A C Nonestab
2) EMPTY CUP FOR DET 100 MG[60]() Specification : DRG. NO AFK/SK-246-05 SHT. NO. 2 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) DISC TO DRG.NO.FD 537 TO DRG. PART NO[65]() Specification : DISC TO DRG.NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) 51MM MORTAR BOMB BODY(EMPTY) TO PT. NO.ITV 17 SA[65]() Specification : 51MM MORTAR BOMB BODY(EMPTY) TO PT. NO.ITV 17 SA (02 SHEETS),SHEET NO.01 DC 37111-A DT.21.05.07 & SHEET-2, DC 37193-A DT.13.11.08. C Nonestab
2) DISC: DRG.9-04367/9- -104/ 38.366. 113[63]() Specification : DISC: DRG.9-04367/9- -104/ 38.366. 113, DC.NO.36309-A, DT-14.07.97. C Nonestab
3) SLEEVE:DRG.9-04367/9- -104/ 38.316[63]() Specification : SLEEVE:DRG.9-04367/9- -104/ 38.316 .101,DC.NO.36309-A,DT.14.07.97. C Nonestab
4) BODY TO DRG.NO.9-04367/9- -104/ 38.300.150[63]() Specification : BODY TO DRG.NO.9-04367/9- -104/ 38.300.150, DC NO.36396-A DT-21.03.98. C Nonestab
5) CAP: DRG.9-04367/9- -104/ 38.320. 262[63]() Specification : CAP: DRG.9-04367/9- -104/ 38.320. 262-DC.NO.36309-A, DT-14.07.97. C Nonestab
6) RING TO DRG.3-027321-4B2-23[63]() Specification : RING TO DRG.3-027321-4B2-23,DC NO: 36811-A,DT.14.02.2002. C Nonestab
7) PACKING RING TO DRG.3-027321-4B2-22[63]() Specification : PACKING RING TO DRG.3-027321-4B2-22 DC NO.36651-A,28.02.2000 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) SHELL 105MM IFG HE A/L FORGED STEEL[62]() Specification : SHELL 105MM IFG HE A/L FORGED STEEL TO DRG.PART NO.ISX-46GE SHEET-1 DC NO. 37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) LEAD RING TO DRG.NO.b III 8.249.034[64]() Specification : LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUP TO DRG.NO.9-04367/9 - - 104/38.350.189, DC NO.36309-A DT.14.07.97() Specification :CUP TO DRG.NO.9-04367/9 - - 104/38.350.189, DC NO.36309-A DT.14.07.97 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CAP CONDUCTING COMPOSITION (EMPTY)() Specification : TO DESIGNER'S REF.NO.1A4167, PART NO.QX-115A TO DC NO.36230-A, DTD.29.01.1997 FOR PRIMER 1A/L. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]() Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)- C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) DISC TO DRG.NO.2-013535[62]() Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) 51MM MORTAR BOMB BODY(EMPTY)() Specification :TO PT NO.ITV 17 SA (02 SHEETS) SHEET NO.01 DC 37111-A DT.21.05.07 & SHEET-2, DC 37193-A DT.13.11.08 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) LEAD RING() Specification : TO DRG.NO.b III 8.249.034 DC NO.36310-A, DT.14.07.97. C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]() Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]() Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]() Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION. C Nonestab
4) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
5) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
6) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
7) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED]. C Nonestab
8) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS. C Nonestab
9) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
Category : ddp
Grade : 3
Size : L
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]() Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS C Nonestab
2) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]() Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
3) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]() Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS C Nonestab
Category : ddp
Grade : 3
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]() Specification : CQA(A) 2345 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
2) BODY FOR 51MM ILLUMINATING[62]() Specification : SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY & BOTTOM FOR FOG SIGNAL[64]() Specification : DRG. NO. OFDR/FOG SIGNAL/37/A1 AMDT NO. 185 DT. 24/5/2011 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) MACHINING OF FORGED CANISTER[63]() Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address : Govt. Of India, Ministry of Defence (DGQA) Controllerate of Quality Assurance (Amn), Khadki, Pune- 411 003 Telephone: 25824013- C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER NOSE FOR M.B.81MM ILLG.2A[62]() Specification : CQA(A) 2345(C) DRG. NO. ARDE 1965 DET 4 PT NO. ITV 114 C Nonestab
2) BODY EMPTY FOR 51 MM SMOKE [62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPEN.NO.CQA(A) 2352 (d) C Nonestab
3) BODY FOR 51 MM ILLUMINATING[62]() Specification : DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Nonestab
4) CUP HALF (ALU) FOR BOMB 81MM ILLG. MK-II[62]() Specification : CUP HALF ASSY. TO DRG. NO. ARDE 2222, PT NO. ITV 257 SHT-1 AND CUP HALF TO DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2 C Nonestab
5) Delay Holder for 51mm Smoke[62]() Specification : SPCN.NO.CQA(A) 2352 (d) DRG.NO.ARDE-2082 DET.NO.3 PT.NO.IQX 879 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BOMB BODY (EMPTY)FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A C Nonestab
2) EYE BOLT FOR 120MM ILLG.[63]() Specification : DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b) C Nonestab
3) FERRULE FOR 120MM ILLG.[63]() Specification : DRG. NO. ARDE 2097 PT NO ITV - 217 DC- 34492-A.DT.05/12/88. C Nonestab
4) EYE LET FOR 120MM ILLG.[63]() Specification : DRG. NO. ARDE - 2011 , DET NO. 21 PT. NO.ITV-150 SPECN NO. CQA (A) 2321 (b) C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]() Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SET OF 5 COMPONENTS UPPER SET OF 51MM ILLG. CONSISTING OF (I) BASE PLATE (II) COLLAR (III) EYE BOLT [62]() Specification : DRG. NO. ARDE-2064 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
2) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY EMPTY FOR 51MM SMOKE[62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 DC-36973-A DT.09/08/04 & SPEN.NO.CQA(A) 2352 (d) DC-36768 A DATED.18/07/2001 C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY FOR 51MM ILLUMINATING[62]() Specification : SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 C Nonestab
Category :
Grade : Grade III
Size : L
1707 KANCHAN INDIA LIMITED
19-20 BHILWARA TEXTILE MARKET PUR ROAD, OPP NEW CLOTH MARKET BHILWARA Rajasthan
PIN1 : 311001
Phone No. : 247001
GSTIN : 08AABCK0452C1Z3 		JH00000000

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 250 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]() Specification : NO. PROV/OCFAV/FABRIC/001 (a) with Amendment No.2 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min[21]() Specification : FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min SPECIFICATION APPENDIX A provisional specification No S/2594/C/CCWDCP/TC 15(a) Pantone shade No of outer camouflage fabric 191015 TCX R Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148CMS.[21]() Specification : PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (b) R Estab
Category :
Grade : Grade III
Size : L
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS[21]() Specification : PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Estab
Category :
Grade : Grade III
Size : L
1708 MICROPACK PRIVATE LIMITED
3-4-496/A, JYOTHI ARCADE BARKATPURA HYDERABAD Telangana
PIN1 : 500027
Phone No. : 27552606
GSTIN : 29AAACI7731D1ZO 		AAACI7731D

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) PCB, AL7103756 (LF-7440205829)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.756 C Estab
2) PCB, AL7103306 (LF-7440205830)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.306 C Estab
3) PCB, AL7103480 (LF-7440205831)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.480 C Estab
4) PCB, AL7103811[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.811 C Estab
5) PCB, AL7103985[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.985 C Estab
Category : p
Grade : Grade I
Size : M
1) Opto Electronic Factory
Name Specification Use Status
1) PCB, AL7103756 (LF-7440205829)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.756 C Estab
2) PCB, AL7103306 (LF-7440205830)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.306 C Estab
3) PCB, AL7103480 (LF-7440205831)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.480 C Estab
4) PCB, AL7103811[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.811 C Estab
5) PCB, AL7103985 (LF-7440205840)[74]() Specification : PRINTED CIRCUIT BOARD TO DRAWING NO. AL7.103.985 C Estab
6) 7440205829 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.103.756 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 92 X 35 MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.756 OF STABILIZER OF 1A43 C Estab
7) 7440205830 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.103.306 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 70 X 100MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.306 OF STABILIZER OF 1A43 C Estab
8) 7440205831 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.103.480 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 72.5 X 40MM IN 1.5MM THICKNESS) TO DRG.NO.AL7 .103.480 OF STABLIZER OF 1A43 C Estab
9) 7440205834 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.102.786 MIL-PRF-55110G DOUBLE SIDED PC B (APPROX SIZE 60 X 25 MM IN 1.5MM THICKNESS) TO DRG.NO. AL7.102.786 OF VISOR OF 1A43 C Estab
10) 7440205835 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.104.039 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 32 X 47 MM IN 1.5MM THICKNESS) TO DRG.NO.AL7.104.039 OF VISOR OF 1A43 C Estab
11) 7440205836 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.103.341 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX SIZE 57 X 95 MM IN 1.5MM THICKNESS) TO DRG.NO .AL7.103.341 OF VISOR OF 1A43 C Estab
12) 7441120831 PCB[74]() Specification : PCB Drg No.7025.32.04.401 PCB TO DRG. NO. 7025.32.04.40 1, SIZE- 170X 110MM, THICKNESS 2MM, AND AS PER OLF/SPECN. NO. OLF/MSD/PCB/01/MOD AND JSS- 52301 NOTE-SUPPLY SHOULD NOT BE MORE THAN 2 YEARS OLD FROM THE PLACEMENT OF SUPPLY ORDE C Estab
13) 7441120833 PCB[74]() Specification : PCB TO DRG. NO. 7025.32.07.401 Drg No.7025.32.07.401 PCB TO DRG. NO. 7025.32.07.401, SIZE-170X 110 MM, THICKNESS- 2MM, AND OLF/SPECN. NO. OLF/MS D/PCB/01/MOD AND JSS-52301 NOTE-SUPPLY SHOULD NOT BE MORE THAN 2 YEARS OLD FROM THE PLAC C Estab
14) 7441120835 PCB[74]() Specification : PCB TO DRG. NO. 7064.03.08.001 Drg No.7064.03.08.001 PCB TO DRG. NO. 7064.03.08.001, SIZE-170 X 110 MM, THICKNESS -2MM, AND OLF/SPECN. NO. OLF/M SD/PCB/01/MOD AND JSS-2301 NOTE-SUPPLY SHOULD NOT BE MORE THAN 2 YEARS OLD FROM THE PLACEM C Estab
15) 7441122103 PCB[74]() Specification : MIL-PRF-55110G MULTILAYER PCB Drg No.7194.03.00.210 MIL-PRF-55110G MULTILAYER PCB OF SIZE 160X70MM(APPROX) IN THICKNESS OF 1.8MM(APPROX) TO DRG. NO.7194.03.00.210 FOR CONTROL UNIT C Estab
16) 7441122570 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.IUMK.758724.027 PRINTED CIRCUIT BOARD AS PER D RG.NO.IUMK.758724.027 C Estab
17) 7441122759 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.103.734 PRINTED CIRCUIT BOARD MIL-PRF- 55110G DOUBLE SIDED PCB (APPRO X. SIZE 55 X 142 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.10 3.734 C Estab
18) 7441122760 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.102.794 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.102.794 C Estab
19) 7441122762 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.103.195 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.103.195 C Estab
20) 7441122763 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.AL7.814.369 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 35 X 19 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.814.369 C Estab
21) 7441122764 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004 C Estab
22) 7441122765 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.IUMK.758723.007 MIL-PRF-55110G DOUBLE SIDED PC B (APPROX. SIZE 44 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758723.007 C Estab
23) 7441122766 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.IYUMK.758713.003 MIL-PRF-55110G DOUBLE SIDED PC B (APPROX. SIZE 32 X 49 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.003 C Estab
24) 7441122767 PRINTED CIRCUIT BOARD[74]() Specification : PRINTED CIRCUIT BOARD Drg No.IYUMK.758723.012 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 70 X 47.5 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758723.012 C Estab
25) LF 9001120578 PCB SMOTP DOUBLE SIDED PTH PCB AS PER DRG NO AF7 102 187[90]() Specification : PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM C Nonestab
26) PCB 9001120577[90]() Specification : P.C.B. (BOARD) AF7102186 C Nonestab
27) PRINTED CIRCUIT BOARD 7440200279[74]() Specification : Drg No.AL8077143 C Nonestab
28) 7440200210 PCB[74]() Specification : PRINTED CIRCUIT BOARD TO DRG.NO.AL7103692,FOR BLOCK-D C Nonestab
29) 7440200231 PCBs[74]() Specification : PRINTED CIRCUIT BOARD TO DRG.NO.AL7103548,FOR BLOCK-D C Nonestab
Category : p
Grade : Grade I
Size : M
1709 STANDARD PROFILE INDUSTRIES
T-166/1, T-167, M.I.D.C., BHOSARI, PUNE M.I.D.C., BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 67332800
GSTIN : 27AAEFS0495F1Z5 		PNES10292C

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) LOADING TRAY TO ARTICLE NO.1145143[90]() Specification : LOADING TRAY TO ARTICLE NO.1145143 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) LAYERS STATION ASSEMBLY PART NO 1156269[90]() Specification : LAYER STATION ASSEMBLY PART NO.1156269 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) LAYERS STATION ASSEMBLY PART NO 1156269[90]() Specification : LAYER STATION ASSEMBLY PART NO.1156269 C Nonestab
Category :
Grade : Grade III
Size : S
1710 SPUN MICRO PROCESSING PVT LTD
ARAZI NO. 1027, BINAUR KISAN NAGAR VIDHNU ROAD KANPUR NAGAR Uttar Pradesh
PIN1 : 209304
Phone No. : 3004044
GSTIN : 09AABCS8714R1ZL 		RTKS04469D

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF 1 SET OF RACE RING CONSIST OF LOWER RING TO DRG. AK-630 119-1, UPPER RING TO DRG. AK-630 119-2, INTERNAL RING TO DRG. AK-630 119-25 FROM A SET OF FORGINGS CONSISTS OF FORGING OF LOWER RING TO DRG. AK-630 119-1, FORGING OF UPPER RING TO[91]() Specification : AS PER DRG. & SPECIFICATION C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) HEAD FIRING ROD DRG. NO. IRCL 570 (GF 215031 L) IN FC[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) CATCH MAGAZINE TO DRG. NO. CTM-0116M IN F/C[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) REAR SIGHT BASE TO DRG. NO 301141575 (F1303-028081 D)[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028 (HEAT TREATMENT OPN. TO FINISH DRG. NO. AO-18.01.028 AND PROCESS SCHEDULE SL. FROM 030 TO END ) OF AO-18 STORE[91]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]() Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.[70]() Specification : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.[70]() Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION. C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) BLANK OF BLOCK GAS For JVPC[70]() Specification : BLANK OF BLOCK GAS For JVPC C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) CATCH REAR SIGHT CURSOR FOR MAG 7.62 MM[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001[70]() Specification : PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001 P Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.[70]() Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999. C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04[70]() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003.[70]() Specification : PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.[70]() Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001[70]() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) MOUNTING RAIL for JVPC 5.56 MM[70]() Specification : MOUNTING RAIL C Nonestab
Category : p
Grade : Grade II
Size : M
1) Small Arms Factory
Name Specification Use Status
1) BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*[70]() Specification : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* C Nonestab
Category : p
Grade : Grade II
Size : M
1711 R S PRECISIONENGINEERING INDUSTRIES
Plot No26 Phase IV IDA JEEDIMETLA HYDERABAD Telangana
PIN1 : 500055
Phone No. : 23095216
GSTIN : 36AHMPM1600M1Z9 		AHMPM1600M

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) TRIGGER (FINISH) FOR PISTOL AUTO 9MM 1A.[70]() Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A. C Nonestab
2) MAGAZINE ASSEMBLY FOR 9MM AUTO PISTOL[70]() Specification : MAGAZINE ASSEMBLY TO DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA) FOR PISTOL AUTO 9MM 1A C Nonestab
3) LINK HAMMER FOR PISTOL AUTO 9MM 1A.[70]() Specification : LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 C Nonestab
4) MAGAZINE ASSEMBLY FOR 0.32[70]() Specification : MAGAZINE ASSEMBLY DRG.NO,PS32-400.FOR 0.32" PISTOL.(TRADE FINISH WITH FIRM MATERIAL.)(WITHOUT NICKEL PLATING) C Nonestab
5) SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS.[70]() Specification : MATERIAL BS 970 PT I:1983-655 M-13 En-36B C Nonestab
6) SEAR SAFETY FOR RIFLE 5.56MM INSAS.[79]() Specification : AS PER DRG C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LEG LEFT FRONT ASSEMBLY REQUIRED FOR MOUNTING TRIPOD 7 62MM MGL4A1 OF MAG GUN Description : LEG LEFT FRONT ASSEMBLY REQUIRED FOR MOUNTING TRIPOD 7 62MM MGL4A1 OF MAG GUN() Specification : LEG LEFT FRONT ASSEMBLY TO DRG/DS.CAT.NO.1005-000667 IN FINISHED CONDITION (REQUIRED FOR MOUNTING TRIPOD 7.62MM MGL4A1 OF MAG GUN) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) EXTRACTOR SMALL ARMS CARTRIDGE DRG NO. ARED /SK/2689/250 Description : EXTRACTOR SMALL ARMS CARTRIDGE DRG NO. ARED /SK/2689/250() Specification : AS PER DRG. C Estab
2) PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS Description : PLATFORM RETAINER SPRING RECOIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
3) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM Description : RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM() Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
4) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1712 CUTTING EDGE NGINEERING PRIVATE LIMITED
RIICO INDUSTRIAL AREA, PLOT NO. G-1/189G, IID KHUSHKHERA, TEH. TIJARA, DISTT. ALWAR, ALWAR, Alwar, Rajasthan, 301707 G-1/189 ALWAR Rajasthan
PIN1 : 301707
Phone No. : 9811154167
GSTIN : 08AAJCC8651P1ZV 		AAJCC8651P

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRE FRAG MODULE ASSEMBLY LF 9911358291[99]() Specification : PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015 R Nonestab
Category : dp
Grade : 3
Size : S
1713 JJ INDUSTRIES
SYNO 315 RAMPALLY VILLAGE CHERLAPALLY HYDERABAD Telangana
PIN1 : 501301
Phone No. : 7382110911
GSTIN : 36EXRPM6961E1ZU 		HYDM25186A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) CLUTCH SHAFT ASSY TO 6201063014[62]() Specification : CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHACKLE[62]() Specification : SHACKLE 176.64.016-2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) AVIATION COMPRESSOR AK150C OR AK150CB TO 6206406244[62]() Specification : AVIATION COMPRESSOR AK150C OR AK150CB TO DRG NO. 155.38.067-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PACKING RING[62]() Specification : DRG NO. 432.40.106-2 C Nonestab
2) SEAL AND SPRING SET TO 6206411113[62]() Specification : SEAL & SPRING SET TO DRG NO. CQA(HV)5.51.000 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BUSH 036[62]() Specification : BUSH E Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LUG 272[62]() Specification : AS PER VQC ATTACHED E Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) LATCH ASSEMBLY DRAWING TO LF NO 6201218016[62]() Specification : AS PER DRG C Nonestab
2) LATCH ASSEMBLY DRAWING TO LF NO 6201018008[62]() Specification : AS PER DRG C Nonestab
3) LATCH ASSY DRG TO LF NO 6206203328[62]() Specification : AS PER DRG C Nonestab
4) BRACKET TO LF NO 6206203326[62]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) WRENCH SOCKET TO 6206606005[62]() Specification : WRENCH SOCKET TO DRG NO. 175.90.006CBCB C Nonestab
2) WEDGE TO 6206206022[62]() Specification : WEDGE TO DRG NO. 432.21.017CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COVER TO LF 6206206215[62]() Specification : 432 TY 10 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) WEDGE ASSY TO 6206809012[62]() Specification : WEDGE ASSY TO DRG NO. 172.20.029CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FLANGE 127[62]() Specification : FLANGE 172.27. 127-1 E Nonestab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi
Name Specification Use Status
1) GEAR UTD[62]() Specification : GEAR TO DRG NO.20-08-203-3 C Estab
2) TAPPET[62]() Specification : TAPPET TO DRG NO.SB 20-27-15-1 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR[70]() Specification : Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR E Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) TANK ASSY TO 6201086029[62]() Specification : 188.86.045CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1714 KIRTI TRADERS, Mumbai, sole selling agent (OEM - M/s Shish Industries, Surat for Polypropelene corrugated Anti static Sheet)
236 MAJESTIC SHOPPING CENTER, 2ND FLOOR 144 JSS ROAD MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23808568
GSTIN : 27AAAPC7734R2ZA 		AAAPC7734R

Download 		1) Ordnance Factory Varangaon
Name Specification Use Status
1) POLYPROPYLENE CORRUGATED SHEET 250mm, ANTI STATIC[14]() Specification : DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 250 (+/-5)MM X 70 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/- 75) E Nonestab
Category : s
Grade : Grade III
Size : S
1) Ordnance Factory Varangaon
Name Specification Use Status
1) POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC[14]() Specification : DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 245 (+/-5)MM x 160 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/-75) E Nonestab
Category : s
Grade : Grade III
Size : S
1715 Punj Lloyd Ltd
Corporate Office 1, 78 Institutional Area, Sector 32 78 Institutional Area, Sector 32 Gurgaon Haryana
PIN1 : 122001
Phone No. : 2620286
GSTIN : 23AAACP0305Q1ZM 		DELPO8758B

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) DRAWBAR TO PT NO 1143440 AS PER ANNEXURE NO DHANUSH/1143440/2017[90]() Specification : DRAWBAR TO PT NO 1143440 AS PER ANNEXURE NO DHANUSH/1143440/2017 C Nonestab
Category : dp
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017.[90]() Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017. C Nonestab
Category : dp
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) LAYER STATION ASSEMBLY PART NO.1156269[90]() Specification : LAYER STATION ASSEMBLY PART NO.1156269 C Nonestab
Category : dp
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) LOADING TRAY TO ARTICLE NO.1145143[90]() Specification : LOADING TRAY TO ARTICLE NO.1145143 C Nonestab
Category : dp
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) SUB ASSEMBLIES & COMPONENTS OF 81 MM MORTAR[90]() Specification : SUB ASSEMBLIES & COMPONENTS OF 81 MM MORTAR C Nonestab
Category : p
Grade : Grade III
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING[90]() Specification : SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : L
1716 Hitech Engineers ( India)
6/80 , Old Kanpur, Kanpur Nawabganj Kanpur Uttar Pradesh
PIN1 : 208002
Phone No. : 2222222
GSTIN : 09BASPS3863E1Z3 		BASPS3863E

Download 		1) Small Arms Factory
Name Specification Use Status
1) WOODEN REVOLVER GRIP LEFT AND RIGHT AS PER DRG NO PH 9 1 PR[70]() Specification : WOODEN REVOLVER GRIP (LEFT & RIGHT) AS PER DRG. NO. PH-9-1(PR) C Nonestab
Category :
Grade : Grade III
Size : S
1717 Shri Baba Jameennath Auto
Near Jind By Pass Sunderpur Road Rohtak Haryana
PIN1 : 124001
Phone No. : 9467501557
GSTIN : 06ADCPN6210G1ZY 		RTKR08340D

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PIN FOR FRONT SIGHT BLOCK AND GAS PORT BLOCK AS PER DRG No K 1211 WITH FIRMS MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PIN REAR SIGHT BLOCK AS PER DRG NO K 1203 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1203 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 2072 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 2031 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K 2025 C Nonestab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 2023 C Nonestab
3) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]() Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION C Nonestab
4) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
5) BUSHING GUIDE FRONT[74]() Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
6) GUIDE RECOIL FRONT[74]() Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PIN TRIGGER TO DRG NO 29P 0041STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL C Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL C Nonestab
3) SCREW GUARD TRIGGER FRONT TO DRG NO29P 0056 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. NO.29P 0056 required for 0.315" Sporting Rifle C Nonestab
4) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle C Nonestab
5) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle C Nonestab
6) SEAR TO DRG NO 29P 0060STAR2 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle C Nonestab
7) PIN RETAINING LOCKING CATCH TO D S CAT NO 5315 001773 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1221[70]() Specification : AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221) C Nonestab
8) KNOB LEVER LOCK TO D S CAT NO 1005 001656 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1318[70]() Specification : AS PER D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318) C Nonestab
9) PIN COCKING HANDLE TO D S CAT NO 5315 009175 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1288 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]() Specification : AS PER D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED. C Nonestab
10) SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL C Nonestab
11) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL C Nonestab
12) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]() Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL C Nonestab
13) BUSHING PIN[74]() Specification : BUSHING PIN/065453A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
14) SCREW SPECIAL[74]() Specification : SCREW SPECIAL/065603A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) NOSE CAP FOR 51 MM SMOKE [62]() Specification : DRG. NO. ARDE-2082 DET. NO. 7 PT. NO. ITV-215 DC(I)36288-A, SPECN.CQA(A) 2352(d) DC-36768-A DT 18-7-2001. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) EYE BOLT FOR 120MM ILLG.[63]() Specification : DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b) C Nonestab
2) SCREW FX POZ M4X8 FOR 84 MM ILLG.[62]() Specification : DRG.NO.F-1301-074540 B DC(I) 34754 A DATED 10-11-89 SPECN BS:1554 1990 GRADE 302 S 31"CD" WITHUTS 1230 N/MM2 MIN.OR SPECN.NO.BS:1554 1990 GRADE 316S33 CDWITH HARDNESS 250-280 HV / UTS 850-880 N/MM2 (AS SPECIFIEDVIDE CQA(MET) LET NO.MQA-4/ C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CAP FOR CONTAINER BUOYANT SMOKE[62]() Specification : DRG.NO.OFDR/CT/6/M1/A3, SPECN. NO.DGOF/OFDR/OO8. C Nonestab
2) HALF CUP FOR 120MM ILLG.[63]() Specification : DRG.NO.CIA.AMN/2158 PART NO.ISV 1740 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2440A03062 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE PLATE FOR 81MM ILLG.[62]() Specification : SPECN. CQA(A) 2345 (C) DRG. NO. ARDE 1965 DET 13 PT NO. ITV 123 C Nonestab
2) BAFFLE PLATE FOR 81MM ILLG. MK II[62]() Specification : DRG NO. ARDE 1965, DET 15, PT NO. ITV 125, DC 37039A DT. 25/01/2006. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Eye bolt for M.B. 81mm Illg. 2A[62]() Specification : CQA(A) 2345(c) Drg. No. ARDE 1965 DET 14 PT.NO. ITV 124 C Nonestab
2) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
3) HALF CUP FOR BOMB 81 MM ILLG. MK-II[62]() Specification : DRG NO.ARDE 2224 DET NO.5 PT NO. ISV 1930 C Nonestab
4) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) DISC FOR BOMB 51MM PACKING[62]() Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
2) DELAY ELEMENT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BASE PLATE FOR 51MM ILLG. 2A[62]() Specification : CQA(A) 2328 (c) DRG. NO. ARDE 2064 DET 14 PT.NO. ITV 231 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]() Specification : CQA(A) 2345 C Nonestab
2) BASE PLATE FOR 81MM ILLG.[62]() Specification : SPECN. CQA(A) 2345 (C) DRG. NO. ARDE 1965 DET 13 PT NO. ITV 123 C Nonestab
3) BAFFLE PLATE FOR 81MM ILLG. MK II[62]() Specification : DRG NO. ARDE 1965, DET 15, PT NO. ITV 125, DC 37039A DT. 25/01/2006. C Nonestab
4) Pin Locking for 81mm Illg. MK-II[62]() Specification : SPECN. NO. CQA(A) 2345 (C) DRG NO ARDE 1965 DET 26 PT NO ITV 115 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) Pin Locking for 51mm Illg. [62]() Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BODY FOR 51MM ILLUMINATING[62]() Specification : SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CUP FOR BOMB 51MM ILLG.[62]() Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
2) SECURING NUT FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.13 C Nonestab
3) PROPELLANT CUP FOR 81MM ATAL[62]() Specification : DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ROD COCKING FOR JVPC[70]() Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462) C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) MOUNTING RAIL for JVPC[70]() Specification : MOUNTING RAIL C Nonestab
2) PISTON FOR JVPC ALFA[70]() Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA C Nonestab
3) SCREW AS PER DRAWING NO SK 6506 TE[70]() Specification : SCREW AS PER DRAWING NO SK 6506 TE C Nonestab
4) NUT AS PER DRAWING NO SK 6513 TE[70]() Specification : NUT AS PER DRAWING NO SK 6513 TE C Nonestab
5) LATCH AS PER DRAWING NO SK 6519 TE[70]() Specification : LATCH AS PER DRAWING NO SK 6519 TE C Nonestab
6) SLIDE DRG No SK 6534 TE[70]() Specification : SLIDE DRG No SK-6534/TE C Nonestab
7) LATCH DRG No SK 6535 TE[70]() Specification : LATCH DRG No SK- 6535 /TE C Nonestab
8) PIN DRG No SK 6531 TE[70]() Specification : PIN DRG No SK- 6531/ TE C Nonestab
9) RIVET SK 6529 TE[70]() Specification : RIVET SK- 6529/ TE C Nonestab
10) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768[71]() Specification : Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768 C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.[70]() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) REAR SIGHT CURSOR FOR MAG 7.62 MM[70]() Specification : AS PER DRAWING C Nonestab
2) SIGHT REAR FOR MAG[70]() Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) RIVET LOCKING SHOULDER FOR MAG[70]() Specification : DRG NO. SKM 876G FOR LOCKING SHOULDER C Nonestab
2) RIVET BOTTOM PLATE FOR MAG[70]() Specification : RIVET BOTTOM PLATE TO DS CAT NO. 5320 - 000944 PT.NO.2025Y DC(I) NO. 27014-SA DT- 16.01.17 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SECURING NUT GAS REGULATOR FOR MAG[70]() Specification : DS CAT NO.5310-002662 DC(I) 25349-SA DT.30.4.02 (MATL.ST.RD.19.05 MM DIA GD.605M36 FROM L.F.NO.0283000019 WILL BE SUPPLIED BY S.A.F.ON B/G.)AS PER DRGAS PER DRG C Nonestab
2) SCREW SIDE STOCK FOR MAG[70]() Specification : DS CAT NO. 5305-004284 DC NO. 27106-SA DT- 21.06.17 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.[70]() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) RIVET BOTTOM PLATE 5320 000945 FOR MAG[70]() Specification : RIVET BOTTOM PLATE DS CAT NO. 5320 - 000945 PT.NO.2025Z DC(I) NO. 27286-SA DT- 14.02.21 IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) EXTRACTOR for MAG[70]() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN., C Nonestab
2) Body Trigger for MAG[61]() Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15 C Nonestab
3) PAWL GUIDE CARTRIDGE for MAG[70]() Specification : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17 C Nonestab
4) BRUSH CLEANING CHAMBER FOR MAG[71]() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO. 17850-SA DT.12-4-84 IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1718 AILGA RUBBER WORKS
84/8 FAZALGANJ FAZALGANJ KANPUR Uttar Pradesh
PIN1 : 208012
Phone No. : 2217068
GSTIN : 09AABFA5380Q1ZZ 		KNPA01663E

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) RING TO DRG. No. AF8685195 (LF-7432414017)[74]() Specification : AS PER DRAWING C Estab
2) GASKET TO DRG. No. BL8685376 (LF-7420114016)[74]() Specification : AS PER DRAWING C Estab
3) GASKET TO DRG No BL9364319 LF 7420114018[74]() Specification : AS PER DRAWING C Estab
4) RING TO DRG. No. BL9362303 (LF-7420114026)[74]() Specification : AS PER DRAWING C Estab
5) RING TO DRG NO AF8683898 LF 7420414003[74]() Specification : AS PER DRAWING C Estab
6) GASKET TO DRG NO AF8685889 LF 7432411029[74]() Specification : AS PER DRAWING C Estab
7) BUSHING TO DRG NO AF8220467 LF 7432414001[74]() Specification : AS PER DRAWING C Estab
8) GASKET TO DRG NO AF8683429 LF 7432414005[74]() Specification : AS PER DRAWING C Estab
9) BUSHING TO DRG NO AF8220575 LF 7432414008[74]() Specification : AS PER DRAWING C Estab
10) GASKET TO DRG NO AF8683997 LF 7432415001[74]() Specification : AS PER DRAWING C Estab
11) GASKET TO DRG NO BSH7840319 LF 7434015001[74]() Specification : AS PER DRAWING C Estab
12) GASKET TO DRG NO 70631000003 LF 7441120841[74]() Specification : AS PER DRAWING C Estab
13) RING TO DRG NO 70631000202 LF 7441121229[74]() Specification : AS PER DRAWING C Estab
14) PACKING TO DRG NO BL7840287 LF 9001110696[90]() Specification : AS PER DRAWING C Estab
15) GASKET TO DRG NO BL7840300 LF 9001110700[90]() Specification : AS PER DRAWING C Estab
16) BUSH TO DRG NO AL8220083 LF 9002101045[90]() Specification : AS PER DRAWING C Estab
17) BLANKING PLUG TO DRG NO BSH7858162 LF 9004101067[74]() Specification : AS PER DRAWING C Estab
18) GASKET TO DRG NO Y7596269 LF 9023101157[90]() Specification : AS PER DRAWING C Estab
19) GASKET TO DRG NO BSH8684019 LF 9911460348[99]() Specification : AS PER DRAWING C Estab
20) RING TO DRG NO AF8683898 14 LF 9927086177[99]() Specification : AS PER DRAWING C Estab
21) GASKET TO DRG NO Y2754696 LF 9927090320[99]() Specification : AS PER DRAWING C Estab
Category : p
Grade : Grade II
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) BELLOW AS PER DRG. NO. OLF/R&D/BPK-2/254 (LF-2109610024)[21]() Specification : AS PER DRAWING C Estab
2) SEALING RING TO DRG. No. OLF/STD/117 (LF-7420214011)[74]() Specification : AS PER DRAWING C Estab
3) SHOCK ABSORBER TO DRG. No. BSH8639024 (LF-7424114001)[74]() Specification : AS PER DRAWING C Estab
4) PACKING TO DRG. No. Y-6199098 (LF-7432315001)[74]() Specification : AS PER DRAWING C Estab
5) WASHER TO DRG. No. AF7854068 (LF-7432413004)[74]() Specification : AS PER DRAWING C Estab
6) RING TO DRG. No. AF8685195 (LF-7432414017)[74]() Specification : AS PER DRAWING C Estab
7) SHOCK ABSORBER TO DRG. No. BSH8639022 (LF-7434014001)[74]() Specification : AS PER DRAWING C Estab
8) GASKET TO DRG. No. ATS8.683.408 (LF-7440201592)[74]() Specification : AS PER DRAWING C Estab
9) RING TO DRG. No. BL9.365.635 (LF-7440202631)[74]() Specification : AS PER DRAWING C Estab
10) GASKET TO DRG. No. 7194.03.00.023 (LF-7440205942)[74]() Specification : AS PER DRAWING C Estab
11) RING RUBBER MOULD TO DRG. No. BL9.362.687-02 (LF-7590100042)[75]() Specification : AS PER DRAWING C Estab
12) RING RUBBER MOULD TO DRG. NO. BL9362687-04 (LF-7590100044)[75]() Specification : AS PER DRAWING C Estab
13) RING TO DRG. No. BL8683340 (LF-9001100605[90]() Specification : AS PER DRAWING C Estab
14) GASKET TO DRG. No. BL9365088 (LF-9001100767)[90]() Specification : AS PER DRAWING C Estab
15) SLEEVE TO DRG. No. BL7867013 (LF-9001110422)[90]() Specification : AS PER DRAWING C Estab
16) GASKET TO DRG. NO. BSH8683031 (LF-9004101369)[90]() Specification : AS PER DRAWING C Estab
17) CAP TO DRG. No. AL8634005 (LF-9911460707)[99]() Specification : AS PER DRAWING C Estab
18) GASKET TO DRG. No.BSH7840305-02 (LF-9927088848)[99]() Specification : AS PER DRAWING C Estab
19) GASKET TO DRG. No. 14547840697-03 (LF-9927089048)[99]() Specification : AS PER DRAWING C Estab
20) GASKET TO DRG. No. BSH8683151 (LF-9927089049)[99]() Specification : AS PER DRAWING C Estab
21) GASKET TO DRG. No.BL8683357 (LF-9927090367)[99]() Specification : AS PER DRAWING C Estab
22) GASKET TO DRG. No. 14548214014 (LF-9927090478)[99]() Specification : AS PER DRAWING C Estab
23) RING TO DRG. No. 14508686945 (LF-9927094488)[99]() Specification : AS PER DRAWING C Estab
24) GASKET TO DRG. No. M2754801 (LF-9927094561)[99]() Specification : AS PER DRAWING C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) RUBBER COMPOUND FOR SOLE & HEEL[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM() Specification : PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM C Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Packing 645 01 7317 1 Description : Packing 645 01 7317 1() Specification : Packing Drg. No. 645-01-7317-1 C Estab
2) Packing Drg No 645 01 7339 1 Description : Packing Drg No 645 01 7339 1() Specification : Packing 645-01-7339-1 Specification Plate 20, Type 005216-75 C Estab
3) RUBBER BEEDING Description : RUBBER BEEDING() Specification : RUBBER BEEDING (NITRILE RUBBER) AS PER DRG NO. 645-01-7220-1/A C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003011002 STRUCTURAL ADHESIVE ( SA-6 ) Description : 1003011002 STRUCTURAL ADHESIVE ( SA-6 )() Specification : SPECN NO. DMS/SA-6/2002 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SENSING ELEMENT (EMPTY ASSEMBLY) Description : SENSING ELEMENT (EMPTY ASSEMBLY)() Specification : DRG. PT NO. ITX-39A DC 35916A DT. 21.02.95 SPECN. CQA(A) 1817(t) DC 37096-A, DT. 06.03.2007 WITH (1) DUST CUP DRG. PT NO. ITX-283 DC 35597-A DT. 06.10.93 = 01 NO. (2) FASTNER FOR SAFETY PIN CORD DRG. NO. ITX-284 DC 35916-A DT. 21.02.95 = C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) O RING I D 38 0 MM 250KG 6241101204[62]() Specification : "O" RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB. C Nonestab
2) NEOPRENE RUBBER WASHER 450 KG (6231401501)[62]() Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG. NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY C Estab
3) WASHER (RUBBER) 250KG (6240901300)[65]() Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO- PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED. FOR 250 KG HSLD BOMB. C Nonestab
Category : p
Grade : Grade III
Size : S
1719 Skytec Solutions, New Delhi as an Indian Agent of foreign firm M/s Larsen & Brusgaard, Denmark
BA-16B, Janak Puri, New Delhi- New Delhi- 110058 Delhi
PIN1 : 110058
Phone No. : 01125613711
GSTIN : 07AAAPT1349M1ZF 		DELS31128G

Download 		1) Ordnance Parachute Factory

[Deemed Registration]
Name Specification Use Status
1) MILITARY ALTIMETER LUMINOUS ALTITRACK Altitrack Altimeters for CFF Parachute Description : MILITARY ALTIMETER LUMINOUS ALTITRACK Altitrack Altimeters for CFF Parachute() Specification : SPECN-NO:-ADRDE/CFF/SAFETY-ALT/22/03/SPCN DRG.NO.-ADRDE/PAS/2005/9 A11-1 E Estab
Category : s
Grade : 3
Size : S
1) Ordnance Parachute Factory

[Deemed Registration]
Name Specification Use Status
1) MILITARY CYPRES 2 Cypres for CFF Parachute Description : MILITARY CYPRES 2 Cypres for CFF Parachute() Specification : SPECN.NO:-ADRDE/CFF/SAFETY-CYP/21/02/SPCN(c) DRG.NO:-ADRDE/PAS/2005/9/A-10 E Estab
Category : s
Grade : 3
Size : S
1) Ordnance Parachute Factory

[Deemed Registration]
Name Specification Use Status
1) Goggles for CFF Parachute Description : Goggles for CFF Parachute() Specification : SPECN.NO. ADRDE/PAS/2005/9-A12 ADRDE/PAS/2005/9(e) R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Parachute Factory

[Deemed Registration]
Name Specification Use Status
1) Goggles for CFF Parachute Description : Goggles for CFF Parachute() Specification : SPECN.NO. ADRDE/PAS/2005/9-A12 ADRDE/PAS/2005/9(e) R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Parachute Factory

[Deemed Registration]
Name Specification Use Status
1) PARATROOPER MAGNETIC WRIST COMPASS LUMINOUS Wrist Compass Luminous for CFF Parachute Description : PARATROOPER MAGNETIC WRIST COMPASS LUMINOUS Wrist Compass Luminous for CFF Parachute() Specification : SPECN.NO-ADRDE/CFF/SAFETY-COMP/23/04/SPCN(b) DRG.NO.-ADRDE/PAS/2005/9 A13 E Estab
Category : s
Grade : 3
Size : S
1720 M/s SANKO ENGINEERS
96, HATIARA ROAD KOLKATA WEST BENGAL
PIN1 : 700059
Phone No. : 9830465591 		AEZPN1144C

Download 		1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC Description : HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC() Specification : HEAD AUTOMATIC COCKING RAMMER ASSY. TO DRG NO. 2007475 IN F/C C Nonestab
Category : p
Grade : 3
Size : S