IS:11652-2000 HDPE Bag white size 75 cm X 50 cm X 100 cm

IS:11652-2000 HDPE Bag white size 75 cm X 50 cm X 100 cm

POWER SUPPLY UNIT DRG. NO. GMIL435154.001 POWER SUPPLY UNIT AS PER SPECN.NO. GMIL.435154.001

POWER SUPPLY UNIT DRG. NO. GMIL435154.001 POWER SUPPLY UNIT AS PER SPECN.NO. GMIL.435154.001

Wooden Packing Box to Drg No COT SK 2616

As per Drg. No. COT SK-2616

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 6

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX. HARDNESS: 65-75 VPN. GRAIN SIZE: 0.05 mm MAX FREE FROM PREF: GRAIN ORIENTATION DEFECT.

CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX. HARDNESS: 65-75 VPN. GRAIN SIZE: 0.05 mm MAX FREE FROM PREF: GRAIN ORIENTATION DEFECT.

CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-400 MM, WT. 90-110 KG. BOW LIMIT 5 MM PER 3 MTRS, HARDNESS: 60-75 VPN GRAIN SIZE : 0.05 MM MAX FREE FROM GRAIN ORIENTATION.

CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-400 MM, WT. 90-110 KG. BOW LIMIT 5 MM PER 3 MTRS, HARDNESS: 60-75 VPN GRAIN SIZE : 0.05 MM MAX FREE FROM GRAIN ORIENTATION.

CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATEST ISSUE). BOW LIMITS : 5MM PER 3 METER MAX. HARDNESS: 60 TO 70 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENT DEFECT.

CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATEST ISSUE). BOW LIMITS : 5MM PER 3 METER MAX. HARDNESS: 60 TO 70 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENT DEFECT.

C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX. HARDNESS: 65 TO 75 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERED GRAIN ORIENTATION & DEFECTS

C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX. HARDNESS: 65 TO 75 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERED GRAIN ORIENTATION & DEFECTS

-

C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METER MAX. HARDNESS: 65 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENTATION & DEFECT

C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METER MAX. HARDNESS: 65 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENTATION & DEFECT

-

C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERRED GRAIN ORIENTATION & OTHER DEFECT

C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERRED GRAIN ORIENTATION & OTHER DEFECT

-

SPRING RECUPERATOR

SPRING RECUPERATOR TO DRG. NO, 4019826/5176661

ANVIL TO DRG.NO.9-0643/9- -104/3,DC36309-A,DT.14.7.97.- O.F.BADMAL

ANVIL TO DRG.NO.9-0643/9- -104/3,DC36309-A,DT.14.7.97.- O.F.BADMAL

CAP TO DRG.NO.9-0643/9 O.F.BADMAL

CAP TO DRG.NO.9-0643/9- -104/1,DC.34183-A,DT-28.7.87.- O.F.BADMAL

MODIFIED AMMUNITION STAY

MODIFIED AMMUNITION STAY

LOADER AUTO SUB ASSY (3018096/IAN-4MA)

LOADER AUTO SUB ASSY (3018096/IAN-4MA)

HOPPER AUTO SUB ASSY (2010006/IAN-34-A)

HOPPER AUTO SUB ASSY (2010006/IAN-34-A)

BREECH CASING SUB ASSY (IAN-3MA/1002319/2)

BREECH CASING SUB ASSY (IAN-3MA/1002319/2)

BREECH MECHANISM SUB ASSY (10002376/ IAN-38 A)

BREECH MECHANISM SUB ASSY (10002376/ IAN-38 A)

HACR SUB ASSY (2007475/IAN-33A)

HACR SUB ASSY (2007475/IAN-33A)

AS PER TE

AS PER TE

Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A

Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI

DRG. NO. SK- 5573R

CABLE 2 7194.70 02.000

CABLE 2 7194.70 02.000

Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB

Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB

0204-03-02-00-06-005-00DB

SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE

SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE

SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE

PCB AU7.820.043 Drg No.AU7820043 PCB(DOUBLESIDED PTH)DRG:AU7.82 0.043 &SPCN:OLF/MSD/PCB/01/MOD CONDITIONS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASE MATERIAL=GLASS EPOXY BASE,COPP ER CLAD GRADE GF.(3)THICKNESS OF BASE -1.5MM & COPPER FOIL T HICKNESS 50 MICRO MTR. (4) PCB TINPLATED WITH PROVISION OF GR EEN MASKING(5)SIZE-50X47.5MMSQ

PCB AU7.820.043 Drg No.AU7820043 PCB(DOUBLESIDED PTH)DRG:AU7.82 0.043 &SPCN:OLF/MSD/PCB/01/MOD CONDITIONS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASE MATERIAL=GLASS EPOXY BASE,COPP ER CLAD GRADE GF.(3)THICKNESS OF BASE -1.5MM & COPPER FOIL T HICKNESS 50 MICRO MTR. (4) PCB TINPLATED WITH PROVISION OF GR EEN MASKING(5)SIZE-50X47.5MMSQ

PCB,SIZE 82.37MM X 43MM Drg No.OLF/EPS/TVNE-4B/SMD P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BOARD OF THICKNESS 2 MM AND COPPER FOIL THICKNESS 50 MICROMETER AS PER SPCN.NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301,S IZE 82.37 MM X 43 MM .

PCB,SIZE 82.37MM X 43MM Drg No.OLF/EPS/TVNE-4B/SMD P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BOARD OF THICKNESS 2 MM AND COPPER FOIL THICKNESS 50 MICROMETER AS PER SPCN.NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301,S IZE 82.37 MM X 43 MM .

PCB SIZE- 61 X 43 MMSQ SMOTP DOUBLE SIDED,PTH,PCB AS PER DRG. NO. OLF/EBU/01, AND SPECN. NO. OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK- NESS 1.5 MM. AND COPPER FOIL THICKNESS 50 MICROMETER,CONFO-RMING TO JSS-52301, SIZE OF PCB-61 X 43 MMSQ.

PCB SIZE- 61 X 43 MMSQ SMOTP DOUBLE SIDED,PTH,PCB AS PER DRG. NO. OLF/EBU/01, AND SPECN. NO. OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK- NESS 1.5 MM. AND COPPER FOIL THICKNESS 50 MICROMETER,CONFO-RMING TO JSS-52301, SIZE OF PCB-61 X 43 MMSQ.

PCB OLF/RMU/COUNTER CARD/RUS PCB FOR RMU SIZE-127MM X 71MM AS PER DRG. NO.OLF/RMU/COUNTER CARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5MM AND C OPPER FOIL THICKNESS 50MICROM. CONFIRMING TO SPECIFICATION OL F/MSD/PCB/01/MOD AND JSS-52301

PCB OLF/RMU/COUNTER CARD/RUS PCB FOR RMU SIZE-127MM X 71MM AS PER DRG. NO.OLF/RMU/COUNTER CARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5MM AND C OPPER FOIL THICKNESS 50MICROM. CONFIRMING TO SPECIFICATION OL F/MSD/PCB/01/MOD AND JSS-52301

P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM

P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM

PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM

PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM

ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953

ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953

DRG. NO. 4730-006953

PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724

PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724

DRG. NO. 1015-000724

WEBBING NYLON 44 MM U/D 17800N

SPECN. NO.: IS:4727-1968 except for :- i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and C/QAI/TC-8/7(b). ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn. the material shall conform to the sealed pattern held in the custody of the Controller,CQAT and C,KANPUR. iii)PACKING and MARKING : As per schedule No. CIT and C/PMS/41.

SOLID TYRE (PART NO 765-34-41) AFTER RUBBERISATION ITS TO BE 765-34-CD 124 SOLID TYRE.

SOLID TYRE (PART NO 765-34-41) AFTER RUBBERISATION ITS TO BE 765-34-CD 124 SOLID TYRE.

SOLID TYRE (PART NO 765-34-41) AFTER RUBBERISATION ITS TO BE 765-34-CD 124 SOLID TYRE.

SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting

SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting

ADHESIVE TYPE -B

IND/ENG/PROV/1193/d

• As Per Specification/Drawing

• As Per Specification/Drawing

NEOPRENE COATED NYLON FABRIC 650 GM 50 gm sqr mtr Width 101CM

Specn no. CQAE/1940/ 1613/a

D HOOK

Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3

Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3

D-Ring Upper for Folding Bailer (Radius- 51 mm)

D-Ring Upper for Folding Bailer (Radius- 51 mm)

D-Ring Lower for Folding Bailer (Radius-76 mm

Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing

Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing

Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing

Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing

Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing

FLOOR BOARD (FRP) IN 3 PARTS

IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006

IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006

LIFTING PLANK

IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

Neoprene Rubber mould with shore hardness 60+-5

Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3

Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3

GRATING

IMPD - 0410/A and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD - 0410/A and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

BOW END PLANK

IMPD – 0408 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD – 0408 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

BUTTON PRESS CLOTH TO CLOTH

IS : 9721 and IMPD -0413/B

IMPD -0413/B

AIR VALVE FOR RECEE BOAT

IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437)

IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437)

OBM BRACKET ASSEMBLY IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006

IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006

IMPD-0409/B

FOLDING OARS/ PADDLES

IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006

IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006

KEEL IN 3 PIECES

IMSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A) and As per Clause 5.6 and 5.7 of Specn No. CQAE/1940/ 1520(b):2006

MSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A)

TOGGLE WOOD Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

TOGGLE WOOD Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

Webbing Nylon 44 mm OG

Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:- 1. Count of yarn- 840 denier high tenacity nylon yarn. 2. width- 44 mm +- 1.5 mm 3. thickness - 1.1 mm (min) to 2.0 mm (max) 4.breaking strength - 1815 Kgs (min)

RUBBER TUBE 14 MM INNER DIA 19 MM. OUTER DIA

SPECN-IS:637

SPECN-IS:637

SPECN-IS:5676 NEOPRENE C-4.BS:2752

SPECN-IS:5676 NEOPRENE C-4.BS:2752

SPECN-NO:-IND/GS/468

SPECN-NO:-IND/GS/468

SPECN.NO:-IMPD-2050

SPECN.NO:-IMPD-2050

SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET)

SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET)

SPECN. 65 MM X 20MM CHIR WOOD WELL FINISHED and FREE FROM KNOTSAND CRACKS TREATED WITH COPPER NAPTHANATE SOLUTION and PAINTED OG

SPECN. 65 MM X 20MM CHIR WOOD WELL FINISHED and FREE FROM KNOTSAND CRACKS TREATED WITH COPPER NAPTHANATE SOLUTION and PAINTED OG

SPECIFICATION NO. IS : 536-1968

SPECIFICATION NO. IS : 536-1968

BEST TRADE QUALITY

BEST TRADE QUALITY

SPECN-IS:6488,WIDTH-38 MM+-2.0 MM,WEIGHT MIN.62 GM/METER BREAKING STRENGTH-MIN 3020 N ON FULL WIDTH X 20 CM STRIP.

SPECN-IS:6488,WIDTH-38 MM+-2.0 MM,WEIGHT MIN.62 GM/METER BREAKING STRENGTH-MIN 3020 N ON FULL WIDTH X 20 CM STRIP.

IMPD 2050

IMPD 2050

BEST TRADE QUALITY

BEST TRADE QUALITY

IS 723

IS 723

ADHESIVE TYPE -A

SPECIFICATION NO: IND/ENG/PROV/1193/d-2004

• As Per Specification/Drawing

• As Per Specification/Drawing

SPECN-CQAE/1940/ 1494/2000 & CONNECTED DRGS.

SPECN-CQAE/1940/ 1494/2000 & CONNECTED DRGS.

SPECN-CQAE/1940/ 1494/2000 & CONNECTED DRGS.

SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)

SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)

SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)

SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON

SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON

MANUFACTURED FROM HIGH TENACITY NYLONIN OLIVE/DARK GREEN AND SHALL CONFORM TO IS:4227

MANUFACTURED FROM HIGH TENACITY NYLONIN OLIVE/DARK GREEN AND SHALL CONFORM TO IS:4227

SPCEN :- IS:4084-1978 (Ist Rev) (amdt.NO.2)-REAFFIRMED 2007 AND SUPP. SCHL. NO.CQA(GS)/SS/335. CAT.NO. 5325-000169

SPCEN :- IS:4084-1978 (Ist Rev) (amdt.NO.2)-REAFFIRMED 2007 AND SUPP. SCHL. NO.CQA(GS)/SS/335. CAT.NO. 5325-000169

SPECN-IMPD-0411

SPECN-IMPD-0411

IMPD-0411

SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES. 1-COUNT OF YARN-210 DENIER, HIGH TENACITY. 2-WIDTH-25 MM +-1MM. 3-THICKNESS-0.5 MM TO 0.8 MM. 4-WEIGHT MAX-1120 GMS/100 METERS. 5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS

SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES. 1-COUNT OF YARN-210 DENIER, HIGH TENACITY. 2-WIDTH-25 MM +-1MM. 3-THICKNESS-0.5 MM TO 0.8 MM. 4-WEIGHT MAX-1120 GMS/100 METERS. 5-BREAKING STRENGTH-MIN.405 KGS ON FULL WIDTH 20 CMS STRIPS

Spring Steel Wire dia 1.1MM for Striker Mechanism, Material Spec IV.STA 3 or 4 or IS:4454:2001,SL or BS:1408:1964. 1408-C for Spring as per Drg. ANO.NAD 7606/5

Spring Steel Wire dia 1.1MM for Striker Mechanism, Material Spec IV.STA 3 or 4 or IS:4454:2001,SL or BS:1408:1964. 1408-C for Spring as per Drg. ANO.NAD 7606/5

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

cloth plain weave polyester and cotton grey 138 cm width minimum excluding selvedges

IND/TC/0042 (F)

HUB WHEEL TO PART NO 2590 001806 SHT 1 AND SHT 2

HUB WHEEL TO PART NO 2590 001806 SHT 1 AND SHT 2

PART NO 2590 001806 SHT 1 AND SHT 2

LOCK OCK WITH BUCKLE

ADRDE/1354.

• As per Specification/Drawing

• As per Specification/Drawing